[MTD] Driver for AT26Fxxx dataflash devices

Add support for AT26Fxxx dataflash devices. These devices have a quite different
commandset than the AT45xxx chips, which are handled by at91_dataflash.c, so a
combined driver turned out to be more ugly than useful.

Tested only on AT26F004.

Signed-off-by: Hans-Jürgen Koch <hjk@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

3 files changed, 494 insertions, 0 deletions

diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 440f685..bef0f0d 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -60,6 +60,14 @@ config MTD_DATAFLASH
 	  Sometimes DataFlash chips are packaged inside MMC-format
 	  cards; at this writing, the MMC stack won't handle those.
 
+config MTD_DATAFLASH26
+	tristate "AT91RM9200 DataFlash AT26xxx"
+	depends on MTD && ARCH_AT91RM9200 && AT91_SPI
+	help
+	  This enables access to the DataFlash chip (AT26xxx) on an
+	  AT91RM9200-based board.
+	  If you have such a board and such a DataFlash, say 'Y'.
+
 config MTD_M25P80
 	tristate "Support for M25 SPI Flash"
 	depends on MTD && SPI_MASTER && EXPERIMENTAL
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index 0f788d5..8ab568b 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -16,4 +16,5 @@ obj-$(CONFIG_MTD_MTDRAM)	+= mtdram.o
 obj-$(CONFIG_MTD_LART)		+= lart.o
 obj-$(CONFIG_MTD_BLOCK2MTD)	+= block2mtd.o
 obj-$(CONFIG_MTD_DATAFLASH)	+= mtd_dataflash.o
+obj-$(CONFIG_MTD_DATAFLASH26)	+= at91_dataflash26.o
 obj-$(CONFIG_MTD_M25P80)	+= m25p80.o
diff --git a/drivers/mtd/devices/at91_dataflash26.c b/drivers/mtd/devices/at91_dataflash26.c
new file mode 100644
index 0000000..64ce37f
--- /dev/null
+++ b/drivers/mtd/devices/at91_dataflash26.c
@@ -0,0 +1,485 @@
+/*
+ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder)
+ * This is a largely modified version of at91_dataflash.c that
+ * supports AT26xxx dataflash chips. The original driver supports
+ * AT45xxx chips.
+ *
+ * Note: This driver was only tested with an AT26F004. It should be
+ * easy to make it work with other AT26xxx dataflash devices, though.
+ *
+ * Copyright (C) 2007 Hans J. Koch <hjk@linutronix.de>
+ * original Copyright (C) SAN People (Pty) Ltd
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+
+#include <asm/arch/at91_spi.h>
+
+#define DATAFLASH_MAX_DEVICES	4	/* max number of dataflash devices */
+
+#define MANUFACTURER_ID_ATMEL		0x1F
+
+/* command codes */
+
+#define AT26_OP_READ_STATUS		0x05
+#define AT26_OP_READ_DEV_ID		0x9F
+#define AT26_OP_ERASE_PAGE_4K		0x20
+#define AT26_OP_READ_ARRAY_FAST		0x0B
+#define AT26_OP_SEQUENTIAL_WRITE	0xAF
+#define AT26_OP_WRITE_ENABLE		0x06
+#define AT26_OP_WRITE_DISABLE		0x04
+#define AT26_OP_SECTOR_PROTECT		0x36
+#define AT26_OP_SECTOR_UNPROTECT	0x39
+
+/* status register bits */
+
+#define AT26_STATUS_BUSY		0x01
+#define AT26_STATUS_WRITE_ENABLE	0x02
+
+struct dataflash_local
+{
+	int spi;			/* SPI chip-select number */
+	unsigned int page_size;		/* number of bytes per page */
+};
+
+
+/* Detected DataFlash devices */
+static struct mtd_info* mtd_devices[DATAFLASH_MAX_DEVICES];
+static int nr_devices = 0;
+
+/* Allocate a single SPI transfer descriptor.  We're assuming that if multiple
+   SPI transfers occur at the same time, spi_access_bus() will serialize them.
+   If this is not valid, then either (i) each dataflash 'priv' structure
+   needs it's own transfer descriptor, (ii) we lock this one, or (iii) use
+   another mechanism.   */
+static struct spi_transfer_list* spi_transfer_desc;
+
+/*
+ * Perform a SPI transfer to access the DataFlash device.
+ */
+static int do_spi_transfer(int nr, char* tx, int tx_len, char* rx, int rx_len,
+		char* txnext, int txnext_len, char* rxnext, int rxnext_len)
+{
+	struct spi_transfer_list* list = spi_transfer_desc;
+
+	list->tx[0] = tx;	list->txlen[0] = tx_len;
+	list->rx[0] = rx;	list->rxlen[0] = rx_len;
+
+	list->tx[1] = txnext; 	list->txlen[1] = txnext_len;
+	list->rx[1] = rxnext;	list->rxlen[1] = rxnext_len;
+
+	list->nr_transfers = nr;
+	/* Note: spi_transfer() always returns 0, there are no error checks */
+	return spi_transfer(list);
+}
+
+/*
+ * Return the status of the DataFlash device.
+ */
+static unsigned char at91_dataflash26_status(void)
+{
+	unsigned char command[2];
+
+	command[0] = AT26_OP_READ_STATUS;
+	command[1] = 0;
+
+	do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
+
+	return command[1];
+}
+
+/*
+ * Poll the DataFlash device until it is READY.
+ */
+static unsigned char at91_dataflash26_waitready(void)
+{
+	unsigned char status;
+
+	while (1) {
+		status = at91_dataflash26_status();
+		if (!(status & AT26_STATUS_BUSY))
+			return status;
+	}
+}
+
+/*
+ * Enable/disable write access
+ */
+ static void at91_dataflash26_write_enable(int enable)
+{
+	unsigned char cmd[2];
+
+	DEBUG(MTD_DEBUG_LEVEL3, "write_enable: enable=%i\n", enable);
+
+	if (enable)
+		cmd[0] = AT26_OP_WRITE_ENABLE;
+	else
+		cmd[0] = AT26_OP_WRITE_DISABLE;
+	cmd[1] = 0;
+
+	do_spi_transfer(1, cmd, 2, cmd, 2, NULL, 0, NULL, 0);
+}
+
+/*
+ * Protect/unprotect sector
+ */
+ static void at91_dataflash26_sector_protect(loff_t addr, int protect)
+{
+	unsigned char cmd[4];
+
+	DEBUG(MTD_DEBUG_LEVEL3, "sector_protect: addr=0x%06x prot=%d\n",
+	       addr, protect);
+
+	if (protect)
+		cmd[0] = AT26_OP_SECTOR_PROTECT;
+	else
+		cmd[0] = AT26_OP_SECTOR_UNPROTECT;
+	cmd[1] = (addr & 0x00FF0000) >> 16;
+	cmd[2] = (addr & 0x0000FF00) >> 8;
+	cmd[3] = (addr & 0x000000FF);
+
+	do_spi_transfer(1, cmd, 4, cmd, 4, NULL, 0, NULL, 0);
+}
+
+/*
+ * Erase blocks of flash.
+ */
+static int at91_dataflash26_erase(struct mtd_info *mtd,
+				  struct erase_info *instr)
+{
+	struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
+	unsigned char cmd[4];
+
+	DEBUG(MTD_DEBUG_LEVEL1, "dataflash_erase: addr=0x%06x len=%i\n",
+	       instr->addr, instr->len);
+
+	/* Sanity checks */
+	if (priv->page_size != 4096)
+		return -EINVAL; /* Can't handle other sizes at the moment */
+
+	if (   ((instr->len % mtd->erasesize) != 0)
+	    || ((instr->len % priv->page_size) != 0)
+	    || ((instr->addr % priv->page_size) != 0)
+	    || ((instr->addr + instr->len) > mtd->size))
+		return -EINVAL;
+
+	spi_access_bus(priv->spi);
+
+	while (instr->len > 0) {
+		at91_dataflash26_write_enable(1);
+		at91_dataflash26_sector_protect(instr->addr, 0);
+		at91_dataflash26_write_enable(1);
+		cmd[0] = AT26_OP_ERASE_PAGE_4K;
+		cmd[1] = (instr->addr & 0x00FF0000) >> 16;
+		cmd[2] = (instr->addr & 0x0000FF00) >> 8;
+		cmd[3] = (instr->addr & 0x000000FF);
+
+		DEBUG(MTD_DEBUG_LEVEL3, "ERASE: (0x%02x) 0x%02x 0x%02x"
+					"0x%02x\n",
+			cmd[0], cmd[1], cmd[2], cmd[3]);
+
+		do_spi_transfer(1, cmd, 4, cmd, 4, NULL, 0, NULL, 0);
+		at91_dataflash26_waitready();
+
+		instr->addr += priv->page_size;	 /* next page */
+		instr->len -= priv->page_size;
+	}
+
+	at91_dataflash26_write_enable(0);
+	spi_release_bus(priv->spi);
+
+	/* Inform MTD subsystem that erase is complete */
+	instr->state = MTD_ERASE_DONE;
+	if (instr->callback)
+		instr->callback(instr);
+
+	return 0;
+}
+
+/*
+ * Read from the DataFlash device.
+ *   from   : Start offset in flash device
+ *   len    : Number of bytes to read
+ *   retlen : Number of bytes actually read
+ *   buf    : Buffer that will receive data
+ */
+static int at91_dataflash26_read(struct mtd_info *mtd, loff_t from, size_t len,
+				 size_t *retlen, u_char *buf)
+{
+	struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
+	unsigned char cmd[5];
+
+	DEBUG(MTD_DEBUG_LEVEL1, "dataflash_read: %lli .. %lli\n",
+	      from, from+len);
+
+	*retlen = 0;
+
+	/* Sanity checks */
+	if (!len)
+		return 0;
+	if (from + len > mtd->size)
+		return -EINVAL;
+
+	cmd[0] = AT26_OP_READ_ARRAY_FAST;
+	cmd[1] = (from & 0x00FF0000) >> 16;
+	cmd[2] = (from & 0x0000FF00) >> 8;
+	cmd[3] = (from & 0x000000FF);
+	/* cmd[4] is a "Don't care" byte  */
+
+	DEBUG(MTD_DEBUG_LEVEL3, "READ: (0x%02x) 0x%02x 0x%02x 0x%02x\n",
+	       cmd[0], cmd[1], cmd[2], cmd[3]);
+
+	spi_access_bus(priv->spi);
+	do_spi_transfer(2, cmd, 5, cmd, 5, buf, len, buf, len);
+	spi_release_bus(priv->spi);
+
+	*retlen = len;
+	return 0;
+}
+
+/*
+ * Write to the DataFlash device.
+ *   to     : Start offset in flash device
+ *   len    : Number of bytes to write
+ *   retlen : Number of bytes actually written
+ *   buf    : Buffer containing the data
+ */
+static int at91_dataflash26_write(struct mtd_info *mtd, loff_t to, size_t len,
+				  size_t *retlen, const u_char *buf)
+{
+	struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
+	unsigned int addr, buf_index = 0;
+	int ret = -EIO, sector, last_sector;
+	unsigned char status, cmd[5];
+
+	DEBUG(MTD_DEBUG_LEVEL1, "dataflash_write: %lli .. %lli\n", to, to+len);
+
+	*retlen = 0;
+
+	/* Sanity checks */
+	if (!len)
+		return 0;
+	if (to + len > mtd->size)
+		return -EINVAL;
+
+	spi_access_bus(priv->spi);
+
+	addr = to;
+	last_sector = -1;
+
+	while (buf_index < len) {
+		sector = addr / priv->page_size;
+		/* Write first byte if a new sector begins */
+		if (sector != last_sector) {
+			at91_dataflash26_write_enable(1);
+			at91_dataflash26_sector_protect(addr, 0);
+			at91_dataflash26_write_enable(1);
+
+			/* Program first byte of a new sector */
+			cmd[0] = AT26_OP_SEQUENTIAL_WRITE;
+			cmd[1] = (addr & 0x00FF0000) >> 16;
+			cmd[2] = (addr & 0x0000FF00) >> 8;
+			cmd[3] = (addr & 0x000000FF);
+			cmd[4] = buf[buf_index++];
+			do_spi_transfer(1, cmd, 5, cmd, 5, NULL, 0, NULL, 0);
+			status = at91_dataflash26_waitready();
+			addr++;
+			/* On write errors, the chip resets the write enable
+			   flag. This also happens after the last byte of a
+			   sector is successfully programmed. */
+			if (   ( !(status & AT26_STATUS_WRITE_ENABLE))
+			    && ((addr % priv->page_size) != 0) ) {
+				DEBUG(MTD_DEBUG_LEVEL1,
+					"write error1: addr=0x%06x, "
+					"status=0x%02x\n", addr, status);
+				goto write_err;
+			}
+			(*retlen)++;
+			last_sector = sector;
+		}
+
+		/* Write subsequent bytes in the same sector */
+		cmd[0] = AT26_OP_SEQUENTIAL_WRITE;
+		cmd[1] = buf[buf_index++];
+		do_spi_transfer(1, cmd, 2, cmd, 2, NULL, 0, NULL, 0);
+		status = at91_dataflash26_waitready();
+		addr++;
+
+		if (   ( !(status & AT26_STATUS_WRITE_ENABLE))
+		    && ((addr % priv->page_size) != 0) ) {
+			DEBUG(MTD_DEBUG_LEVEL1, "write error2: addr=0x%06x, "
+				"status=0x%02x\n", addr, status);
+			goto write_err;
+		}
+
+		(*retlen)++;
+	}
+
+	ret = 0;
+	at91_dataflash26_write_enable(0);
+write_err:
+	spi_release_bus(priv->spi);
+	return ret;
+}
+
+/*
+ * Initialize and register DataFlash device with MTD subsystem.
+ */
+static int __init add_dataflash(int channel, char *name, int nr_pages,
+				int pagesize)
+{
+	struct mtd_info *device;
+	struct dataflash_local *priv;
+
+	if (nr_devices >= DATAFLASH_MAX_DEVICES) {
+		printk(KERN_ERR "at91_dataflash26: Too many devices "
+				"detected\n");
+		return 0;
+	}
+
+	device = kzalloc(sizeof(struct mtd_info) + strlen(name) + 8,
+			 GFP_KERNEL);
+	if (!device)
+		return -ENOMEM;
+
+	device->name = (char *)&device[1];
+	sprintf(device->name, "%s.spi%d", name, channel);
+	device->size = nr_pages * pagesize;
+	device->erasesize = pagesize;
+	device->owner = THIS_MODULE;
+	device->type = MTD_DATAFLASH;
+	device->flags = MTD_CAP_NORFLASH;
+	device->erase = at91_dataflash26_erase;
+	device->read = at91_dataflash26_read;
+	device->write = at91_dataflash26_write;
+
+	priv = (struct dataflash_local *)kzalloc(sizeof(struct dataflash_local),
+		GFP_KERNEL);
+	if (!priv) {
+		kfree(device);
+		return -ENOMEM;
+	}
+
+	priv->spi = channel;
+	priv->page_size = pagesize;
+	device->priv = priv;
+
+	mtd_devices[nr_devices] = device;
+	nr_devices++;
+	printk(KERN_INFO "at91_dataflash26: %s detected [spi%i] (%i bytes)\n",
+	       name, channel, device->size);
+
+	return add_mtd_device(device);
+}
+
+/*
+ * Detect and initialize DataFlash device connected to specified SPI channel.
+ *
+ */
+
+struct dataflash26_types {
+	unsigned char id0;
+	unsigned char id1;
+	char *name;
+	int pagesize;
+	int nr_pages;
+};
+
+struct dataflash26_types df26_types[] = {
+	{
+		.id0 = 0x04,
+		.id1 = 0x00,
+		.name = "AT26F004",
+		.pagesize = 4096,
+		.nr_pages = 128,
+	},
+	{
+		.id0 = 0x45,
+		.id1 = 0x01,
+		.name = "AT26DF081A", /* Not tested ! */
+		.pagesize = 4096,
+		.nr_pages = 256,
+	},
+};
+
+static int __init at91_dataflash26_detect(int channel)
+{
+	unsigned char status, cmd[5];
+	int i;
+
+	spi_access_bus(channel);
+	status = at91_dataflash26_status();
+
+	if (status == 0 || status == 0xff) {
+		printk(KERN_ERR "at91_dataflash26_detect: status error %d\n",
+			status);
+		spi_release_bus(channel);
+		return -ENODEV;
+	}
+
+	cmd[0] = AT26_OP_READ_DEV_ID;
+	do_spi_transfer(1, cmd, 5, cmd, 5, NULL, 0, NULL, 0);
+	spi_release_bus(channel);
+
+	if (cmd[1] != MANUFACTURER_ID_ATMEL)
+		return -ENODEV;
+
+	for (i = 0; i < ARRAY_SIZE(df26_types); i++) {
+		if (   cmd[2] == df26_types[i].id0
+		    && cmd[3] == df26_types[i].id1)
+			return add_dataflash(channel,
+						df26_types[i].name,
+						df26_types[i].nr_pages,
+						df26_types[i].pagesize);
+	}
+
+	printk(KERN_ERR "at91_dataflash26_detect: Unsupported device "
+			"(0x%02x/0x%02x)\n", cmd[2], cmd[3]);
+	return -ENODEV;
+}
+
+static int __init at91_dataflash26_init(void)
+{
+	spi_transfer_desc = kmalloc(sizeof(struct spi_transfer_list),
+				    GFP_KERNEL);
+	if (!spi_transfer_desc)
+		return -ENOMEM;
+
+	/* DataFlash (SPI chip select 0) */
+	at91_dataflash26_detect(0);
+
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+	/* DataFlash card (SPI chip select 3) */
+	at91_dataflash26_detect(3);
+#endif
+	return 0;
+}
+
+static void __exit at91_dataflash26_exit(void)
+{
+	int i;
+
+	for (i = 0; i < DATAFLASH_MAX_DEVICES; i++) {
+		if (mtd_devices[i]) {
+			del_mtd_device(mtd_devices[i]);
+			kfree(mtd_devices[i]->priv);
+			kfree(mtd_devices[i]);
+		}
+	}
+	nr_devices = 0;
+	kfree(spi_transfer_desc);
+}
+
+module_init(at91_dataflash26_init);
+module_exit(at91_dataflash26_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Hans J. Koch");
+MODULE_DESCRIPTION("DataFlash AT26xxx driver for Atmel AT91RM9200");