Merge tag 'for-linus-20140127' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 - Add me (Brian Norris) as an additional MTD maintainer (it'd be nice to get
   David's "ack" for this; I'm sure he approves, but he's been pretty silent
   lately)
 - Add Ezequiel Garcie as maintainer for the pxa3xx NAND driver
 - Last (?) round of pxa3xx improvements for supporting Armada 370/XP
 - Typical churn in driver boilerplate (OOM messages, printk()'s, devm_*, etc.)
 - Quad read mode support for SPI NOR driver (m25p80)
 - Update Davinci NAND driver to prepare for use on new platforms
 - Begin to kill off NAND_MAX_{PAGE,OOB}SIZE macros; more work is pending
 - Miscellaneous NAND device support (new IDs)
 - Add READ RETRY support for Micron MLC NAND
 - Support new GPMI NAND ECC layout device-tree binding
 - Avoid mapping stack/vmalloc() memory for GPMI NAND DMA

* tag 'for-linus-20140127' of git://git.infradead.org/linux-mtd: (151 commits)
  mtd: gpmi: add sanity check when mapping DMA for read_buf/write_buf
  mtd: gpmi: allocate a proper buffer for non ECC read/write
  mtd: m25p80: Set rx_nbits for Quad SPI transfers
  mtd: m25p80: Enable Quad SPI read transfers for s25fl512s
  mtd: s3c2410: Merge plat/regs-nand.h into s3c2410.c
  mtd: mtdram: add missing 'const'
  mtd: m25p80: assign default read command
  mtd: nuc900_nand: remove redundant return value check of platform_get_resource()
  mtd: plat_nand: remove redundant return value check of platform_get_resource()
  mtd: nand: add Intel manufacturer ID
  mtd: nand: add SanDisk manufacturer ID
  mtd: nand: add support for Samsung K9LCG08U0B
  mtd: nand: pxa3xx: Add support for 2048 bytes page size devices
  mtd: m25p80: Use OPCODE_QUAD_READ_4B for 4-byte addressing
  mtd: nand: don't use {read,write}_buf for 8-bit transfers
  mtd: nand: use __packed shorthand
  mtd: nand: support Micron READ RETRY
  mtd: nand: add generic READ RETRY support
  mtd: nand: add ONFI vendor block for Micron
  mtd: nand: localize ECC failures per page
  ...

1 files changed, 6 insertions, 14 deletions

diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 4f091c1..dd5e101 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -2047,21 +2047,21 @@ static int __init docg3_probe(struct platform_device *pdev)
 	ress = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!ress) {
 		dev_err(dev, "No I/O memory resource defined\n");
-		goto noress;
+		return ret;
 	}
-	base = ioremap(ress->start, DOC_IOSPACE_SIZE);
+	base = devm_ioremap(dev, ress->start, DOC_IOSPACE_SIZE);
 
 	ret = -ENOMEM;
-	cascade = kzalloc(sizeof(*cascade) * DOC_MAX_NBFLOORS,
-			  GFP_KERNEL);
+	cascade = devm_kzalloc(dev, sizeof(*cascade) * DOC_MAX_NBFLOORS,
+			       GFP_KERNEL);
 	if (!cascade)
-		goto nomem1;
+		return ret;
 	cascade->base = base;
 	mutex_init(&cascade->lock);
 	cascade->bch = init_bch(DOC_ECC_BCH_M, DOC_ECC_BCH_T,
 			     DOC_ECC_BCH_PRIMPOLY);
 	if (!cascade->bch)
-		goto nomem2;
+		return ret;
 
 	for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) {
 		mtd = doc_probe_device(cascade, floor, dev);
@@ -2101,11 +2101,6 @@ err_probe:
 	for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++)
 		if (cascade->floors[floor])
 			doc_release_device(cascade->floors[floor]);
-nomem2:
-	kfree(cascade);
-nomem1:
-	iounmap(base);
-noress:
 	return ret;
 }
 
@@ -2119,7 +2114,6 @@ static int __exit docg3_release(struct platform_device *pdev)
 {
 	struct docg3_cascade *cascade = platform_get_drvdata(pdev);
 	struct docg3 *docg3 = cascade->floors[0]->priv;
-	void __iomem *base = cascade->base;
 	int floor;
 
 	doc_unregister_sysfs(pdev, cascade);
@@ -2129,8 +2123,6 @@ static int __exit docg3_release(struct platform_device *pdev)
 			doc_release_device(cascade->floors[floor]);
 
 	free_bch(docg3->cascade->bch);
-	kfree(cascade);
-	iounmap(base);
 	return 0;
 }