Merge tag 'for-linus-20140610' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 - refactor m25p80.c driver for use as a general SPI NOR framework for
   other drivers which may speak to SPI NOR flash without providing full
   SPI support (i.e., not part of drivers/spi/)
 - new Freescale QuadSPI driver (utilizing new SPI NOR framework)
 - updates for the STMicro "FSM" SPI NOR driver
 - fix sync/flush behavior on mtd_blkdevs
 - fixup subpage write support on a few NAND drivers
 - correct the MTD OOB test for odd-sized OOB areas
 - add BCH-16 support for OMAP NAND
 - fix warnings and trivial refactoring
 - utilize new ECC DT bindings in pxa3xx NAND driver
 - new LPDDR NVM driver
 - address a few assorted bugs caught by Coverity
 - add new imx6sx support for GPMI NAND
 - use a bounce buffer for NAND when non-DMA-able buffers are used

* tag 'for-linus-20140610' of git://git.infradead.org/linux-mtd: (77 commits)
  mtd: gpmi: add gpmi support for imx6sx
  mtd: maps: remove check for CONFIG_MTD_SUPERH_RESERVE
  mtd: bf5xx_nand: use the managed version of kzalloc
  mtd: pxa3xx_nand: make the driver work on big-endian systems
  mtd: nand: omap: fix omap_calculate_ecc_bch() for-loop error
  mtd: nand: r852: correct write_buf loop bounds
  mtd: nand_bbt: handle error case for nand_create_badblock_pattern()
  mtd: nand_bbt: remove unused variable
  mtd: maps: sc520cdp: fix warnings
  mtd: slram: fix unused variable warning
  mtd: pfow: remove unused variable
  mtd: lpddr: fix Kconfig dependency, for I/O accessors
  mtd: nand: pxa3xx: Add supported ECC strength and step size to the DT binding
  mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding
  mtd: nand: pxa3xx: Clean pxa_ecc_init() error handling
  mtd: nand: Warn the user if the selected ECC strength is too weak
  mtd: nand: omap: Documentation: How to select correct ECC scheme for your device ?
  mtd: nand: omap: add support for BCH16_ECC - NAND driver updates
  mtd: nand: omap: add support for BCH16_ECC - ELM driver updates
  mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates
  ...

1 files changed, 8 insertions, 8 deletions

diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index e4696b3..9f02c28 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -169,33 +169,33 @@ config MTD_OTP
 	  in the programming of OTP bits will waste them.
 
 config MTD_CFI_INTELEXT
-	tristate "Support for Intel/Sharp flash chips"
+	tristate "Support for CFI command set 0001 (Intel/Sharp chips)"
 	depends on MTD_GEN_PROBE
 	select MTD_CFI_UTIL
 	help
 	  The Common Flash Interface defines a number of different command
 	  sets which a CFI-compliant chip may claim to implement. This code
-	  provides support for one of those command sets, used on Intel
-	  StrataFlash and other parts.
+	  provides support for command set 0001, used on Intel StrataFlash
+	  and other parts.
 
 config MTD_CFI_AMDSTD
-	tristate "Support for AMD/Fujitsu/Spansion flash chips"
+	tristate "Support for CFI command set 0002 (AMD/Fujitsu/Spansion chips)"
 	depends on MTD_GEN_PROBE
 	select MTD_CFI_UTIL
 	help
 	  The Common Flash Interface defines a number of different command
 	  sets which a CFI-compliant chip may claim to implement. This code
-	  provides support for one of those command sets, used on chips
-	  including the AMD Am29LV320.
+	  provides support for command set 0002, used on chips including
+	  the AMD Am29LV320.
 
 config MTD_CFI_STAA
-	tristate "Support for ST (Advanced Architecture) flash chips"
+	tristate "Support for CFI command set 0020 (ST (Advanced Architecture) chips)"
 	depends on MTD_GEN_PROBE
 	select MTD_CFI_UTIL
 	help
 	  The Common Flash Interface defines a number of different command
 	  sets which a CFI-compliant chip may claim to implement. This code
-	  provides support for one of those command sets.
+	  provides support for command set 0020.
 
 config MTD_CFI_UTIL
 	tristate