summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
diff options
context:
space:
mode:
authorJohan Rudholm <johan.rudholm@stericsson.com>2013-01-28 15:08:27 +0100
committerChris Ball <cjb@laptop.org>2013-02-24 14:37:07 -0500
commit567c89032cfdda8047562abe450947ac01f2d3c7 (patch)
tree09bdcb03c610055c9c1b69220948619d62934142 /drivers/mmc
parentd887874e0ead6a0b86b6046b872730c81c121352 (diff)
downloadop-kernel-dev-567c89032cfdda8047562abe450947ac01f2d3c7.zip
op-kernel-dev-567c89032cfdda8047562abe450947ac01f2d3c7.tar.gz
mmc: core: Break out start_signal_voltage_switch
Allow callers to access the start_signal_voltage_switch host_ops member without going through any cmd11 logic. This is mostly a preparation for the following signal voltage switch patch. Also, reset ios.signal_voltage to its original value if start_signal_voltage_switch fails. Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Chris Ball <cjb@laptop.org>
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/core/core.c35
-rw-r--r--drivers/mmc/core/core.h4
-rw-r--r--drivers/mmc/core/mmc.c8
-rw-r--r--drivers/mmc/core/sd.c2
-rw-r--r--drivers/mmc/core/sdio.c3
5 files changed, 31 insertions, 21 deletions
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 789056f..bb794c7 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1317,7 +1317,26 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
return ocr;
}
-int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, bool cmd11)
+int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage)
+{
+ int err = 0;
+ int old_signal_voltage = host->ios.signal_voltage;
+
+ host->ios.signal_voltage = signal_voltage;
+ if (host->ops->start_signal_voltage_switch) {
+ mmc_host_clk_hold(host);
+ err = host->ops->start_signal_voltage_switch(host, &host->ios);
+ mmc_host_clk_release(host);
+ }
+
+ if (err)
+ host->ios.signal_voltage = old_signal_voltage;
+
+ return err;
+
+}
+
+int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage)
{
struct mmc_command cmd = {0};
int err = 0;
@@ -1328,7 +1347,7 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, bool cmd11
* Send CMD11 only if the request is to switch the card to
* 1.8V signalling.
*/
- if ((signal_voltage != MMC_SIGNAL_VOLTAGE_330) && cmd11) {
+ if (signal_voltage != MMC_SIGNAL_VOLTAGE_330) {
cmd.opcode = SD_SWITCH_VOLTAGE;
cmd.arg = 0;
cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
@@ -1341,15 +1360,7 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, bool cmd11
return -EIO;
}
- host->ios.signal_voltage = signal_voltage;
-
- if (host->ops->start_signal_voltage_switch) {
- mmc_host_clk_hold(host);
- err = host->ops->start_signal_voltage_switch(host, &host->ios);
- mmc_host_clk_release(host);
- }
-
- return err;
+ return __mmc_set_signal_voltage(host, signal_voltage);
}
/*
@@ -1412,7 +1423,7 @@ static void mmc_power_up(struct mmc_host *host)
mmc_set_ios(host);
/* Set signal voltage to 3.3V */
- mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, false);
+ __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330);
/*
* This delay should be sufficient to allow the power supply
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index 9007de7..b9f18a2 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -40,8 +40,8 @@ void mmc_set_ungated(struct mmc_host *host);
void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode);
void mmc_set_bus_width(struct mmc_host *host, unsigned int width);
u32 mmc_select_voltage(struct mmc_host *host, u32 ocr);
-int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage,
- bool cmd11);
+int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage);
+int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage);
void mmc_set_timing(struct mmc_host *host, unsigned int timing);
void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type);
void mmc_power_off(struct mmc_host *host);
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 0d7a979..8a3ad60 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -769,11 +769,11 @@ static int mmc_select_hs200(struct mmc_card *card)
if (card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V &&
host->caps2 & MMC_CAP2_HS200_1_2V_SDR)
- err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120, 0);
+ err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
if (err && card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_8V &&
host->caps2 & MMC_CAP2_HS200_1_8V_SDR)
- err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, 0);
+ err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
/* If fails try again during next card power cycle */
if (err)
@@ -1221,8 +1221,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
* WARNING: eMMC rules are NOT the same as SD DDR
*/
if (ddr == MMC_1_2V_DDR_MODE) {
- err = mmc_set_signal_voltage(host,
- MMC_SIGNAL_VOLTAGE_120, 0);
+ err = __mmc_set_signal_voltage(host,
+ MMC_SIGNAL_VOLTAGE_120);
if (err)
goto err;
}
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 9373639..9a59fcd 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -757,7 +757,7 @@ try_again:
*/
if (!mmc_host_is_spi(host) && rocr &&
((*rocr & 0x41000000) == 0x41000000)) {
- err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, true);
+ err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
if (err) {
ocr &= ~SD_OCR_S18R;
goto try_again;
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 3a64933..1a726ae 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -647,8 +647,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
* it.
*/
if ((ocr & R4_18V_PRESENT) && mmc_host_uhs(host)) {
- err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180,
- true);
+ err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
if (err) {
ocr &= ~R4_18V_PRESENT;
host->ocr &= ~R4_18V_PRESENT;
OpenPOWER on IntegriCloud