Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches from Greg Kroah-Hartman:
 "Here is the big driver core merge for 3.9-rc1

  There are two major series here, both of which touch lots of drivers
  all over the kernel, and will cause you some merge conflicts:

   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.

   - remove CONFIG_EXPERIMENTAL

  Other than those patches, there's not much here, some minor fixes and
  updates"

Fix up trivial conflicts

* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
  base: memory: fix soft/hard_offline_page permissions
  drivercore: Fix ordering between deferred_probe and exiting initcalls
  backlight: fix class_find_device() arguments
  TTY: mark tty_get_device call with the proper const values
  driver-core: constify data for class_find_device()
  firmware: Ignore abort check when no user-helper is used
  firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
  firmware: Make user-mode helper optional
  firmware: Refactoring for splitting user-mode helper code
  Driver core: treat unregistered bus_types as having no devices
  watchdog: Convert to devm_ioremap_resource()
  thermal: Convert to devm_ioremap_resource()
  spi: Convert to devm_ioremap_resource()
  power: Convert to devm_ioremap_resource()
  mtd: Convert to devm_ioremap_resource()
  mmc: Convert to devm_ioremap_resource()
  mfd: Convert to devm_ioremap_resource()
  media: Convert to devm_ioremap_resource()
  iommu: Convert to devm_ioremap_resource()
  drm: Convert to devm_ioremap_resource()
  ...

5 files changed, 19 insertions, 24 deletions

diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig
index ef10387..269d072 100644
--- a/drivers/mmc/core/Kconfig
+++ b/drivers/mmc/core/Kconfig
@@ -18,8 +18,7 @@ config MMC_UNSAFE_RESUME
 	  module parameter "removable=0" or "removable=1".
 
 config MMC_CLKGATE
-	bool "MMC host clock gating (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "MMC host clock gating"
 	help
 	  This will attempt to aggressively gate the clock to the MMC card.
 	  This is done to save power due to gating off the logic and bus
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 8d13c65..cc8a8fa 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -69,7 +69,7 @@ config MMC_SDHCI_PCI
 	  If unsure, say N.
 
 config MMC_RICOH_MMC
-	bool "Ricoh MMC Controller Disabler  (EXPERIMENTAL)"
+	bool "Ricoh MMC Controller Disabler"
 	depends on MMC_SDHCI_PCI
 	help
 	  This adds a pci quirk to disable Ricoh MMC Controller. This
@@ -186,9 +186,6 @@ config MMC_SDHCI_S3C
 	  often referrered to as the HSMMC block in some of the Samsung S3C
 	  range of SoC.
 
-	  Note, due to the problems with DMA, the DMA support is only
-	  available with CONFIG_EXPERIMENTAL is selected.
-
 	  If you have a controller with this interface, say Y or M here.
 
 	  If unsure, say N.
@@ -233,7 +230,7 @@ config MMC_SDHCI_SPEAR
 
 config MMC_SDHCI_S3C_DMA
 	bool "DMA support on S3C SDHCI"
-	depends on MMC_SDHCI_S3C && EXPERIMENTAL
+	depends on MMC_SDHCI_S3C
 	help
 	  Enable DMA support on the Samsung S3C SDHCI glue. The DMA
 	  has proved to be problematic if the controller encounters
@@ -330,8 +327,8 @@ config MMC_MXS
 	  If unsure, say N.
 
 config MMC_TIFM_SD
-	tristate "TI Flash Media MMC/SD Interface support  (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PCI
+	tristate "TI Flash Media MMC/SD Interface support"
+	depends on PCI
 	select TIFM_CORE
 	help
 	  Say Y here if you want to be able to access MMC/SD cards with
@@ -410,8 +407,7 @@ config MMC_S3C_PIO
 	  the S3C MCI driver.
 
 config MMC_S3C_DMA
-	bool "Use DMA transfers only (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "Use DMA transfers only"
 	help
 	  Use DMA to transfer data between memory and the hardare.
 
@@ -420,7 +416,7 @@ config MMC_S3C_DMA
 	  option is useful.
 
 config MMC_S3C_PIODMA
-	bool "Support for both PIO and DMA (EXPERIMENTAL)"
+	bool "Support for both PIO and DMA"
 	help
 	  Compile both the PIO and DMA transfer routines into the
 	  driver and let the platform select at run-time which one
@@ -431,8 +427,8 @@ config MMC_S3C_PIODMA
 endchoice
 
 config MMC_SDRICOH_CS
-	tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PCI && PCMCIA
+	tristate "MMC/SD driver for Ricoh Bay1Controllers"
+	depends on PCI && PCMCIA
 	help
 	  Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA
 	  card whenever you insert a MMC or SD card into the card slot.
diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
index 5e1fb1d..41c27b7 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.c
+++ b/drivers/mmc/host/dw_mmc-pltfm.c
@@ -10,6 +10,7 @@
  * (at your option) any later version.
  */
 
+#include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/io.h>
@@ -46,9 +47,9 @@ int dw_mci_pltfm_register(struct platform_device *pdev,
 	host->dev = &pdev->dev;
 	host->irq_flags = 0;
 	host->pdata = pdev->dev.platform_data;
-	host->regs = devm_request_and_ioremap(&pdev->dev, regs);
-	if (!host->regs)
-		return -ENOMEM;
+	host->regs = devm_ioremap_resource(&pdev->dev, regs);
+	if (IS_ERR(host->regs))
+		return PTR_ERR(host->regs);
 
 	if (drv_data && drv_data->init) {
 		ret = drv_data->init(host);
diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index 206fe49..5b66555 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -614,9 +614,9 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 	host = mmc_priv(mmc);
 	ssp = &host->ssp;
 	ssp->dev = &pdev->dev;
-	ssp->base = devm_request_and_ioremap(&pdev->dev, iores);
-	if (!ssp->base) {
-		ret = -EADDRNOTAVAIL;
+	ssp->base = devm_ioremap_resource(&pdev->dev, iores);
+	if (IS_ERR(ssp->base)) {
+		ret = PTR_ERR(ssp->base);
 		goto out_mmc_free;
 	}
 
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 82a8de1..a0c6214 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -651,10 +651,9 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
 #endif
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	host->ioaddr = devm_request_and_ioremap(&pdev->dev, res);
-	if (!host->ioaddr) {
-		dev_err(dev, "failed to map registers\n");
-		ret = -ENXIO;
+	host->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(host->ioaddr)) {
+		ret = PTR_ERR(host->ioaddr);
 		goto err_req_regs;
 	}