diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-01-26 09:04:18 +1000 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-01-26 09:04:18 +1000 |
commit | 6663050edd9c2e8b1e1f55c09459144d84c045f0 (patch) | |
tree | f683d34d517465d62dcf2fd311f8f6e5d7e736b0 /drivers/mmc | |
parent | 3af03655e885ba7f48ca6318e231a7086a51082e (diff) | |
parent | 2f8e7285606bcdf8f574bff633675eabcee83d5e (diff) | |
download | op-kernel-dev-6663050edd9c2e8b1e1f55c09459144d84c045f0.zip op-kernel-dev-6663050edd9c2e8b1e1f55c09459144d84c045f0.tar.gz |
Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
ALSA: AACI: fix timeout duration
ALSA: AACI: fix timeout condition checking
ARM: 6636/1: ep93xx: default multiplexed gpio ports to gpio mode
ARM: 6637/1: Make the argument to virt_to_phys() "const volatile"
ARM: twd: ensure timer reload is reprogrammed on entry to periodic mode
ARM: 6635/2: Configure reference clock for Versatile Express timers
ARM: versatile: name configuration options after actual board names
ARM: realview: name configuration options after actual board names
ARM: realview,vexpress: fix section mismatch warning for pen_release
ARM: 6632/3: mmci: stop using the blockend interrupts
Diffstat (limited to 'drivers/mmc')
-rw-r--r-- | drivers/mmc/host/mmci.c | 98 | ||||
-rw-r--r-- | drivers/mmc/host/mmci.h | 5 |
2 files changed, 21 insertions, 82 deletions
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 5630228..2de12fe 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -46,10 +46,6 @@ static unsigned int fmax = 515633; * is asserted (likewise for RX) * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY * is asserted (likewise for RX) - * @broken_blockend: the MCI_DATABLOCKEND is broken on the hardware - * and will not work at all. - * @broken_blockend_dma: the MCI_DATABLOCKEND is broken on the hardware when - * using DMA. * @sdio: variant supports SDIO * @st_clkdiv: true if using a ST-specific clock divider algorithm */ @@ -59,8 +55,6 @@ struct variant_data { unsigned int datalength_bits; unsigned int fifosize; unsigned int fifohalfsize; - bool broken_blockend; - bool broken_blockend_dma; bool sdio; bool st_clkdiv; }; @@ -76,7 +70,6 @@ static struct variant_data variant_u300 = { .fifohalfsize = 8 * 4, .clkreg_enable = 1 << 13, /* HWFCEN */ .datalength_bits = 16, - .broken_blockend_dma = true, .sdio = true, }; @@ -86,7 +79,6 @@ static struct variant_data variant_ux500 = { .clkreg = MCI_CLK_ENABLE, .clkreg_enable = 1 << 14, /* HWFCEN */ .datalength_bits = 24, - .broken_blockend = true, .sdio = true, .st_clkdiv = true, }; @@ -210,8 +202,6 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) host->data = data; host->size = data->blksz * data->blocks; host->data_xfered = 0; - host->blockend = false; - host->dataend = false; mmci_init_sg(host, data); @@ -288,21 +278,26 @@ static void mmci_data_irq(struct mmci_host *host, struct mmc_data *data, unsigned int status) { - struct variant_data *variant = host->variant; - /* First check for errors */ if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) { + u32 remain, success; + + /* Calculate how far we are into the transfer */ + remain = readl(host->base + MMCIDATACNT) << 2; + success = data->blksz * data->blocks - remain; + dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status); - if (status & MCI_DATACRCFAIL) + if (status & MCI_DATACRCFAIL) { + /* Last block was not successful */ + host->data_xfered = ((success / data->blksz) - 1 * data->blksz); data->error = -EILSEQ; - else if (status & MCI_DATATIMEOUT) + } else if (status & MCI_DATATIMEOUT) { + host->data_xfered = success; data->error = -ETIMEDOUT; - else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN)) + } else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN)) { + host->data_xfered = success; data->error = -EIO; - - /* Force-complete the transaction */ - host->blockend = true; - host->dataend = true; + } /* * We hit an error condition. Ensure that any data @@ -321,61 +316,14 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, } } - /* - * On ARM variants in PIO mode, MCI_DATABLOCKEND - * is always sent first, and we increase the - * transfered number of bytes for that IRQ. Then - * MCI_DATAEND follows and we conclude the transaction. - * - * On the Ux500 single-IRQ variant MCI_DATABLOCKEND - * doesn't seem to immediately clear from the status, - * so we can't use it keep count when only one irq is - * used because the irq will hit for other reasons, and - * then the flag is still up. So we use the MCI_DATAEND - * IRQ at the end of the entire transfer because - * MCI_DATABLOCKEND is broken. - * - * In the U300, the IRQs can arrive out-of-order, - * e.g. MCI_DATABLOCKEND sometimes arrives after MCI_DATAEND, - * so for this case we use the flags "blockend" and - * "dataend" to make sure both IRQs have arrived before - * concluding the transaction. (This does not apply - * to the Ux500 which doesn't fire MCI_DATABLOCKEND - * at all.) In DMA mode it suffers from the same problem - * as the Ux500. - */ - if (status & MCI_DATABLOCKEND) { - /* - * Just being a little over-cautious, we do not - * use this progressive update if the hardware blockend - * flag is unreliable: since it can stay high between - * IRQs it will corrupt the transfer counter. - */ - if (!variant->broken_blockend) - host->data_xfered += data->blksz; - host->blockend = true; - } - - if (status & MCI_DATAEND) - host->dataend = true; + if (status & MCI_DATABLOCKEND) + dev_err(mmc_dev(host->mmc), "stray MCI_DATABLOCKEND interrupt\n"); - /* - * On variants with broken blockend we shall only wait for dataend, - * on others we must sync with the blockend signal since they can - * appear out-of-order. - */ - if (host->dataend && (host->blockend || variant->broken_blockend)) { + if (status & MCI_DATAEND) { mmci_stop_data(host); - /* Reset these flags */ - host->blockend = false; - host->dataend = false; - - /* - * Variants with broken blockend flags need to handle the - * end of the entire transfer here. - */ - if (variant->broken_blockend && !data->error) + if (!data->error) + /* The error clause is handled above, success! */ host->data_xfered += data->blksz * data->blocks; if (!data->stop) { @@ -770,7 +718,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) struct variant_data *variant = id->data; struct mmci_host *host; struct mmc_host *mmc; - unsigned int mask; int ret; /* must have platform data */ @@ -951,12 +898,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) goto irq0_free; } - mask = MCI_IRQENABLE; - /* Don't use the datablockend flag if it's broken */ - if (variant->broken_blockend) - mask &= ~MCI_DATABLOCKEND; - - writel(mask, host->base + MMCIMASK0); + writel(MCI_IRQENABLE, host->base + MMCIMASK0); amba_set_drvdata(dev, mmc); diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index df06f01..c1df7b8 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -137,7 +137,7 @@ #define MCI_IRQENABLE \ (MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \ MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \ - MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATABLOCKENDMASK) + MCI_CMDRESPENDMASK|MCI_CMDSENTMASK) /* These interrupts are directed to IRQ1 when two IRQ lines are available */ #define MCI_IRQ1MASK \ @@ -177,9 +177,6 @@ struct mmci_host { struct timer_list timer; unsigned int oldstat; - bool blockend; - bool dataend; - /* pio stuff */ struct sg_mapping_iter sg_miter; unsigned int size; |