mmc: core: Fix PowerOff Notify suspend/resume

Modified the mmc_poweroff to resume before sending the poweroff
notification command. In sleep mode only AWAKE and RESET commands are
allowed, so before sending the poweroff notification command resume from
sleep mode and then send the notification command.

PowerOff Notify is tested on a Synopsis Designware Host Controller
(eMMC 4.5). The suspend to RAM and resume works fine.

Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
Tested-by: Girish K S <girish.shivananjappa@linaro.org>
Reviewed-by: Saugata Das <saugata.das@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

2 files changed, 31 insertions, 12 deletions

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 1866155..690255c 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1256,6 +1256,7 @@ static void mmc_poweroff_notify(struct mmc_host *host)
 	int err = 0;
 
 	card = host->card;
+	mmc_claim_host(host);
 
 	/*
 	 * Send power notify command only if card
@@ -1286,6 +1287,7 @@ static void mmc_poweroff_notify(struct mmc_host *host)
 		/* Set the card state to no notification after the poweroff */
 		card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION;
 	}
+	mmc_release_host(host);
 }
 
 /*
@@ -1344,12 +1346,28 @@ static void mmc_power_up(struct mmc_host *host)
 
 void mmc_power_off(struct mmc_host *host)
 {
+	int err = 0;
 	mmc_host_clk_hold(host);
 
 	host->ios.clock = 0;
 	host->ios.vdd = 0;
 
-	mmc_poweroff_notify(host);
+	/*
+	 * For eMMC 4.5 device send AWAKE command before
+	 * POWER_OFF_NOTIFY command, because in sleep state
+	 * eMMC 4.5 devices respond to only RESET and AWAKE cmd
+	 */
+	if (host->card && mmc_card_is_sleep(host->card) &&
+	    host->bus_ops->resume) {
+		err = host->bus_ops->resume(host);
+
+		if (!err)
+			mmc_poweroff_notify(host);
+		else
+			pr_warning("%s: error %d during resume "
+				   "(continue with poweroff sequence)\n",
+				   mmc_hostname(host), err);
+	}
 
 	/*
 	 * Reset ocr mask to be the highest possible voltage supported for
@@ -2403,12 +2421,6 @@ int mmc_suspend_host(struct mmc_host *host)
 		 */
 		if (mmc_try_claim_host(host)) {
 			if (host->bus_ops->suspend) {
-				/*
-				 * For eMMC 4.5 device send notify command
-				 * before sleep, because in sleep state eMMC 4.5
-				 * devices respond to only RESET and AWAKE cmd
-				 */
-				mmc_poweroff_notify(host);
 				err = host->bus_ops->suspend(host);
 			}
 			mmc_do_release_host(host);
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index dd3fcac..9be0319 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1316,11 +1316,13 @@ static int mmc_suspend(struct mmc_host *host)
 	BUG_ON(!host->card);
 
 	mmc_claim_host(host);
-	if (mmc_card_can_sleep(host))
+	if (mmc_card_can_sleep(host)) {
 		err = mmc_card_sleep(host);
-	else if (!mmc_host_is_spi(host))
+		if (!err)
+			mmc_card_set_sleep(host->card);
+	} else if (!mmc_host_is_spi(host))
 		mmc_deselect_cards(host);
-	host->card->state &= ~MMC_STATE_HIGHSPEED;
+	host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
 	mmc_release_host(host);
 
 	return err;
@@ -1340,7 +1342,11 @@ static int mmc_resume(struct mmc_host *host)
 	BUG_ON(!host->card);
 
 	mmc_claim_host(host);
-	err = mmc_init_card(host, host->ocr, host->card);
+	if (mmc_card_is_sleep(host->card)) {
+		err = mmc_card_awake(host);
+		mmc_card_clr_sleep(host->card);
+	} else
+		err = mmc_init_card(host, host->ocr, host->card);
 	mmc_release_host(host);
 
 	return err;
@@ -1350,7 +1356,8 @@ static int mmc_power_restore(struct mmc_host *host)
 {
 	int ret;
 
-	host->card->state &= ~MMC_STATE_HIGHSPEED;
+	host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
+	mmc_card_clr_sleep(host->card);
 	mmc_claim_host(host);
 	ret = mmc_init_card(host, host->ocr, host->card);
 	mmc_release_host(host);