summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
diff options
context:
space:
mode:
authorJaehoon Chung <jh80.chung@samsung.com>2012-01-16 17:49:01 +0900
committerChris Ball <cjb@laptop.org>2012-02-13 20:39:01 -0500
commit6e8201f57c9359c9c5dc8f9805c15a4392492a10 (patch)
treec936936d165e2fd134d657e569754460acebb26e /drivers/mmc
parent7488e924b55002e70f6d8d181f146edac3006b9f (diff)
downloadop-kernel-dev-6e8201f57c9359c9c5dc8f9805c15a4392492a10.zip
op-kernel-dev-6e8201f57c9359c9c5dc8f9805c15a4392492a10.tar.gz
mmc: core: add the capability for broken voltage
There is an understood mismatch between the voltage the host controller is set to and the voltage supplied to the card by a fixed voltage regulator. Teaching the driver to accept the mismatch is overly complicated. Instead just accept the regulator's voltage. This patch adds MMC_CAP2_BROKEN_VOLTAGE. If the voltage didn't satisfy between min_uV and max_uV, try to change the voltage in core.c. When changing the voltage, maybe use regulator_set_voltage(). In regulator_set_voltage(), check the below condition. /* sanity check */ if (!rdev->desc->ops->set_voltage && !rdev->desc->ops->set_voltage_sel) { ret = -EINVAL; goto out; } If some board should use the fixed-regulator, always return -EINVAL. Then, eMMC didn't initialize always. So if use a fixed-regulator, we need to add the MMC_CAP2_BROKEN_VOLTAGE. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/core/core.c4
1 files changed, 4 insertions, 0 deletions
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index b3063b7..1866155 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1131,6 +1131,10 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc,
* might not allow this operation
*/
voltage = regulator_get_voltage(supply);
+
+ if (mmc->caps2 & MMC_CAP2_BROKEN_VOLTAGE)
+ min_uV = max_uV = voltage;
+
if (voltage < 0)
result = voltage;
else if (voltage < min_uV || voltage > max_uV)
OpenPOWER on IntegriCloud