summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
diff options
context:
space:
mode:
authorDoug Anderson <dianders@chromium.org>2015-03-09 16:18:21 -0700
committerUlf Hansson <ulf.hansson@linaro.org>2015-03-31 16:50:43 +0200
commit5c935165da79644df90a647ecc140fb77b40dee5 (patch)
tree0dd8f9bbc1aaa9690fa8f8257d79a6d586b4d785 /drivers/mmc
parent488b8d63a63400e2839062a99358815ca21a2860 (diff)
downloadop-kernel-dev-5c935165da79644df90a647ecc140fb77b40dee5.zip
op-kernel-dev-5c935165da79644df90a647ecc140fb77b40dee5.tar.gz
mmc: dw_mmc: Add a timeout for sending CMD11
In the Designware databook's description of the "Voltage Switch Normal Scenario" it instructs us to set a timer and fail the voltage change if we don't see the voltage change interrupt within 2ms. Let's implement that. Without implementing this I have often been able to reproduce a hang while trying to send CMD11 on an rk3288-based board while constantly ejecting and inserting UHS cards. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/host/dw_mmc.c26
1 files changed, 26 insertions, 0 deletions
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index f68ea4d..8e0836d 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1021,6 +1021,15 @@ static void __dw_mci_start_request(struct dw_mci *host,
dw_mci_start_command(host, cmd, cmdflags);
+ if (cmd->opcode == SD_SWITCH_VOLTAGE) {
+ /*
+ * Databook says to fail after 2ms w/ no response; give an
+ * extra jiffy just in case we're about to roll over.
+ */
+ mod_timer(&host->cmd11_timer,
+ jiffies + msecs_to_jiffies(2) + 1);
+ }
+
if (mrq->stop)
host->stop_cmdr = dw_mci_prepare_command(slot->mmc, mrq->stop);
else
@@ -2159,6 +2168,8 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
/* Check volt switch first, since it can look like an error */
if ((host->state == STATE_SENDING_CMD11) &&
(pending & SDMMC_INT_VOLT_SWITCH)) {
+ del_timer(&host->cmd11_timer);
+
mci_writel(host, RINTSTS, SDMMC_INT_VOLT_SWITCH);
pending &= ~SDMMC_INT_VOLT_SWITCH;
dw_mci_cmd_interrupt(host, pending);
@@ -2572,6 +2583,18 @@ ciu_out:
return ret;
}
+static void dw_mci_cmd11_timer(unsigned long arg)
+{
+ struct dw_mci *host = (struct dw_mci *)arg;
+
+ if (host->state != STATE_SENDING_CMD11)
+ dev_info(host->dev, "Unexpected CMD11 timeout\n");
+
+ host->cmd_status = SDMMC_INT_RTO;
+ set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
+ tasklet_schedule(&host->tasklet);
+}
+
#ifdef CONFIG_OF
static struct dw_mci_of_quirks {
char *quirk;
@@ -2746,6 +2769,9 @@ int dw_mci_probe(struct dw_mci *host)
}
}
+ setup_timer(&host->cmd11_timer,
+ dw_mci_cmd11_timer, (unsigned long)host);
+
host->quirks = host->pdata->quirks;
spin_lock_init(&host->lock);
OpenPOWER on IntegriCloud