summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
diff options
context:
space:
mode:
authorGuennadi Liakhovetski <g.liakhovetski@gmx.de>2012-09-17 16:45:10 +0800
committerChris Ball <cjb@laptop.org>2012-09-19 16:29:45 +0800
commitbec9d4e5939987053169a9bb48fc58b6a2d3e237 (patch)
treee5a018e18cc34cebe2248c4b169988ebaaa33890 /drivers/mmc
parent5413da811fbb11bc0482c92cbb8415073591d462 (diff)
downloadop-kernel-dev-bec9d4e5939987053169a9bb48fc58b6a2d3e237.zip
op-kernel-dev-bec9d4e5939987053169a9bb48fc58b6a2d3e237.tar.gz
mmc: sdhci: Test cd-gpio instead of SDHCI presence when probing
Previously to this patch, an SDHCI platform that uses a GPIO for card detection instead of the internal SDHCI_CARD_PRESENT bit on the presence register would fail to detect a new card. Some drivers worked around this in various ways: esdhc-imx defines an IO accessor to fake the presence bit being true, s3c turns on polling (which stops the SDHCI driver from checking the bit) after a card's inserted. But none of this should be necessary; the real fix is to check whether we're using a GPIO and avoid relying on the presence bit if so, as this patch implements. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/host/sdhci.c8
1 files changed, 8 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index d98b199..0e15c79 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -28,6 +28,7 @@
#include <linux/mmc/mmc.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
+#include <linux/mmc/slot-gpio.h>
#include "sdhci.h"
@@ -1293,6 +1294,13 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
SDHCI_CARD_PRESENT;
+ /* If we're using a cd-gpio, testing the presence bit might fail. */
+ if (!present) {
+ int ret = mmc_gpio_get_cd(host->mmc);
+ if (ret > 0)
+ present = true;
+ }
+
if (!present || host->flags & SDHCI_DEVICE_DEAD) {
host->mrq->cmd->error = -ENOMEDIUM;
tasklet_schedule(&host->finish_tasklet);
OpenPOWER on IntegriCloud