summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
diff options
context:
space:
mode:
authorAndy Shevchenko <andriy.shevchenko@linux.intel.com>2013-01-07 16:31:08 +0200
committerChris Ball <cjb@laptop.org>2013-02-11 13:28:52 -0500
commit8213af3b7a4059f13ad8b5beb3e6d69d9301f27d (patch)
treefe90c6c43b359b0d9ff683f1a4f64e0472f6cea8 /drivers/mmc
parent740b7a44aedbe8d916ce21b636f78467f5da1c59 (diff)
downloadop-kernel-dev-8213af3b7a4059f13ad8b5beb3e6d69d9301f27d.zip
op-kernel-dev-8213af3b7a4059f13ad8b5beb3e6d69d9301f27d.tar.gz
mmc: sdhci: introduce sdhci_update_clock helper to re-enable clock
There are three places where same piece of code is used. Let's split it to a separate function. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/host/sdhci.c27
1 files changed, 13 insertions, 14 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index b930767..336ab06 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1189,6 +1189,15 @@ out:
host->clock = clock;
}
+static inline void sdhci_update_clock(struct sdhci_host *host)
+{
+ unsigned int clock;
+
+ clock = host->clock;
+ host->clock = 0;
+ sdhci_set_clock(host, clock);
+}
+
static int sdhci_set_power(struct sdhci_host *host, unsigned short power)
{
u8 pwr = 0;
@@ -1418,7 +1427,6 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
if (host->version >= SDHCI_SPEC_300) {
u16 clk, ctrl_2;
- unsigned int clock;
/* In case of UHS-I modes, set High Speed Enable */
if ((ios->timing == MMC_TIMING_MMC_HS200) ||
@@ -1458,9 +1466,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
/* Re-enable SD Clock */
- clock = host->clock;
- host->clock = 0;
- sdhci_set_clock(host, clock);
+ sdhci_update_clock(host);
}
@@ -1491,9 +1497,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
}
/* Re-enable SD Clock */
- clock = host->clock;
- host->clock = 0;
- sdhci_set_clock(host, clock);
+ sdhci_update_clock(host);
} else
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
@@ -2083,14 +2087,9 @@ static void sdhci_tasklet_finish(unsigned long param)
(host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
/* Some controllers need this kick or reset won't work here */
- if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) {
- unsigned int clock;
-
+ if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET)
/* This is to force an update */
- clock = host->clock;
- host->clock = 0;
- sdhci_set_clock(host, clock);
- }
+ sdhci_update_clock(host);
/* Spec says we should do both at the same time, but Ricoh
controllers do not like that. */
OpenPOWER on IntegriCloud