summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host
diff options
context:
space:
mode:
authorShawn Lin <shawn.lin@rock-chips.com>2017-03-24 15:50:12 +0800
committerUlf Hansson <ulf.hansson@linaro.org>2017-04-24 21:41:48 +0200
commit8cc35289227c5cbb8811048519c1703e2137d421 (patch)
treee742bcdbf2b2229677f5abfec2eaf9924fff03b5 /drivers/mmc/host
parentbd675698e8eece61c02a5e436e6d5d5ac1180e46 (diff)
downloadop-kernel-dev-8cc35289227c5cbb8811048519c1703e2137d421.zip
op-kernel-dev-8cc35289227c5cbb8811048519c1703e2137d421.tar.gz
mmc: sdhci: clarify the get_timeout_clock callback
Currently the get_timeout_clock callback doesn't clearly have a statement that it needs the variant drivers to return the timeout clock rate in kHz if the SDHCI_TIMEOUT_CLK_UNIT isn't present, otherwise the variant drivers should return it in MHz. It's also very likely that further variant drivers which are going to use this callback will be confused by this situation. Given the fact that moderm sdhci variant hosts are very prone to get the timeout clock from common clock framework (actually the only three users did that), it's more natural to return the value in Hz and we make an explicit comment there. Then we put the unit conversion inside the sdhci core. Thus will improve the code and prevent further misuses. Reported-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc/host')
-rw-r--r--drivers/mmc/host/sdhci-cadence.c4
-rw-r--r--drivers/mmc/host/sdhci-of-arasan.c17
-rw-r--r--drivers/mmc/host/sdhci.c16
-rw-r--r--drivers/mmc/host/sdhci.h1
4 files changed, 13 insertions, 25 deletions
diff --git a/drivers/mmc/host/sdhci-cadence.c b/drivers/mmc/host/sdhci-cadence.c
index 48f6419..07a27dc 100644
--- a/drivers/mmc/host/sdhci-cadence.c
+++ b/drivers/mmc/host/sdhci-cadence.c
@@ -105,9 +105,9 @@ static unsigned int sdhci_cdns_get_timeout_clock(struct sdhci_host *host)
{
/*
* Cadence's spec says the Timeout Clock Frequency is the same as the
- * Base Clock Frequency. Divide it by 1000 to return a value in kHz.
+ * Base Clock Frequency.
*/
- return host->max_clk / 1000;
+ return host->max_clk;
}
static void sdhci_cdns_set_emmc_mode(struct sdhci_cdns_priv *priv, u32 mode)
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 61accf0..ea6b36c 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -157,21 +157,6 @@ static int sdhci_arasan_syscon_write(struct sdhci_host *host,
return ret;
}
-static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host)
-{
- unsigned long freq;
- struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-
- /* SDHCI timeout clock is in kHz */
- freq = DIV_ROUND_UP(clk_get_rate(pltfm_host->clk), 1000);
-
- /* or in MHz */
- if (host->caps & SDHCI_TIMEOUT_CLK_UNIT)
- freq = DIV_ROUND_UP(freq, 1000);
-
- return freq;
-}
-
static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -280,7 +265,7 @@ static int sdhci_arasan_voltage_switch(struct mmc_host *mmc,
static struct sdhci_ops sdhci_arasan_ops = {
.set_clock = sdhci_arasan_set_clock,
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
- .get_timeout_clock = sdhci_arasan_get_timeout_clock,
+ .get_timeout_clock = sdhci_pltfm_clk_get_max_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_arasan_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a971fcf..147df8b 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -3396,20 +3396,22 @@ int sdhci_setup_host(struct sdhci_host *host)
if (!(host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
host->timeout_clk = (host->caps & SDHCI_TIMEOUT_CLK_MASK) >>
SDHCI_TIMEOUT_CLK_SHIFT;
+
+ if (host->caps & SDHCI_TIMEOUT_CLK_UNIT)
+ host->timeout_clk *= 1000;
+
if (host->timeout_clk == 0) {
- if (host->ops->get_timeout_clock) {
- host->timeout_clk =
- host->ops->get_timeout_clock(host);
- } else {
+ if (!host->ops->get_timeout_clock) {
pr_err("%s: Hardware doesn't specify timeout clock frequency.\n",
mmc_hostname(mmc));
ret = -ENODEV;
goto undma;
}
- }
- if (host->caps & SDHCI_TIMEOUT_CLK_UNIT)
- host->timeout_clk *= 1000;
+ host->timeout_clk =
+ DIV_ROUND_UP(host->ops->get_timeout_clock(host),
+ 1000);
+ }
if (override_timeout_clk)
host->timeout_clk = override_timeout_clk;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 35b41da..fdb5d7e 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -561,6 +561,7 @@ struct sdhci_ops {
int (*enable_dma)(struct sdhci_host *host);
unsigned int (*get_max_clock)(struct sdhci_host *host);
unsigned int (*get_min_clock)(struct sdhci_host *host);
+ /* get_timeout_clock should return clk rate in unit of Hz */
unsigned int (*get_timeout_clock)(struct sdhci_host *host);
unsigned int (*get_max_timeout_count)(struct sdhci_host *host);
void (*set_timeout)(struct sdhci_host *host,
OpenPOWER on IntegriCloud