summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host
diff options
context:
space:
mode:
authorIan Molton <spyro@f2s.com>2008-07-15 16:02:21 +0100
committerSamuel Ortiz <sameo@openedhand.com>2008-08-10 23:30:16 +0200
commit4a48998fa16121d0fe3436cce43afd6f47424103 (patch)
tree983aa54b37e229823ca8e85f3b0d9b7168cec908 /drivers/mmc/host
parentec43b8161bd82535fa8099ee6e98cc554de48614 (diff)
downloadop-kernel-dev-4a48998fa16121d0fe3436cce43afd6f47424103.zip
op-kernel-dev-4a48998fa16121d0fe3436cce43afd6f47424103.tar.gz
mfd: TMIO MMC driver
This patch adds support for the MMC subdevice 'cell' commonly found in TMIO based MFDs. Signed-off-by: Ian Molton <spyro@f2s.com> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Diffstat (limited to 'drivers/mmc/host')
-rw-r--r--drivers/mmc/host/Kconfig6
-rw-r--r--drivers/mmc/host/Makefile1
-rw-r--r--drivers/mmc/host/tmio_mmc.c691
-rw-r--r--drivers/mmc/host/tmio_mmc.h194
4 files changed, 892 insertions, 0 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index dc6f257..6fef078 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -174,3 +174,9 @@ config MMC_SDRICOH_CS
To compile this driver as a module, choose M here: the
module will be called sdricoh_cs.
+config MMC_TMIO
+ tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
+ depends on MFD_CORE
+ help
+ This provides support for the SD/MMC cell found in TC6393XB,
+ T7L66XB and also ipaq ASIC3
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index db52eeb..c794cc5 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -21,4 +21,5 @@ obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
obj-$(CONFIG_MMC_SPI) += mmc_spi.o
obj-$(CONFIG_MMC_S3C) += s3cmci.o
obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
+obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
new file mode 100644
index 0000000..95430b8
--- /dev/null
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -0,0 +1,691 @@
+/*
+ * linux/drivers/mmc/tmio_mmc.c
+ *
+ * Copyright (C) 2004 Ian Molton
+ * Copyright (C) 2007 Ian Molton
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver for the MMC / SD / SDIO cell found in:
+ *
+ * TC6393XB TC6391XB TC6387XB T7L66XB
+ *
+ * This driver draws mainly on scattered spec sheets, Reverse engineering
+ * of the toshiba e800 SD driver and some parts of the 2.4 ASIC3 driver (4 bit
+ * support). (Further 4 bit support from a later datasheet).
+ *
+ * TODO:
+ * Investigate using a workqueue for PIO transfers
+ * Eliminate FIXMEs
+ * SDIO support
+ * Better Power management
+ * Handle MMC errors better
+ * double buffer support
+ *
+ */
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/mmc/host.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+
+#include "tmio_mmc.h"
+
+/*
+ * Fixme - documentation conflicts on what the clock values are for the
+ * various dividers.
+ * One document I have says that its a divisor of a 24MHz clock, another 33.
+ * This probably depends on HCLK for a given platform, so we may need to
+ * require HCLK be passed to us from the MFD core.
+ *
+ */
+
+static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
+{
+ void __iomem *cnf = host->cnf;
+ void __iomem *ctl = host->ctl;
+ u32 clk = 0, clock;
+
+ if (new_clock) {
+ for (clock = 46875, clk = 0x100; new_clock >= (clock<<1); ) {
+ clock <<= 1;
+ clk >>= 1;
+ }
+ if (clk & 0x1)
+ clk = 0x20000;
+
+ clk >>= 2;
+ tmio_iowrite8((clk & 0x8000) ? 0 : 1, cnf + CNF_SD_CLK_MODE);
+ clk |= 0x100;
+ }
+
+ tmio_iowrite16(clk, ctl + CTL_SD_CARD_CLK_CTL);
+}
+
+static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
+{
+ void __iomem *ctl = host->ctl;
+
+ tmio_iowrite16(0x0000, ctl + CTL_CLK_AND_WAIT_CTL);
+ msleep(10);
+ tmio_iowrite16(tmio_ioread16(ctl + CTL_SD_CARD_CLK_CTL) & ~0x0100,
+ ctl + CTL_SD_CARD_CLK_CTL);
+ msleep(10);
+}
+
+static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
+{
+ void __iomem *ctl = host->ctl;
+
+ tmio_iowrite16(tmio_ioread16(ctl + CTL_SD_CARD_CLK_CTL) | 0x0100,
+ ctl + CTL_SD_CARD_CLK_CTL);
+ msleep(10);
+ tmio_iowrite16(0x0100, ctl + CTL_CLK_AND_WAIT_CTL);
+ msleep(10);
+}
+
+static void reset(struct tmio_mmc_host *host)
+{
+ void __iomem *ctl = host->ctl;
+
+ /* FIXME - should we set stop clock reg here */
+ tmio_iowrite16(0x0000, ctl + CTL_RESET_SD);
+ tmio_iowrite16(0x0000, ctl + CTL_RESET_SDIO);
+ msleep(10);
+ tmio_iowrite16(0x0001, ctl + CTL_RESET_SD);
+ tmio_iowrite16(0x0001, ctl + CTL_RESET_SDIO);
+ msleep(10);
+}
+
+static void
+tmio_mmc_finish_request(struct tmio_mmc_host *host)
+{
+ struct mmc_request *mrq = host->mrq;
+
+ host->mrq = NULL;
+ host->cmd = NULL;
+ host->data = NULL;
+
+ mmc_request_done(host->mmc, mrq);
+}
+
+/* These are the bitmasks the tmio chip requires to implement the MMC response
+ * types. Note that R1 and R6 are the same in this scheme. */
+#define APP_CMD 0x0040
+#define RESP_NONE 0x0300
+#define RESP_R1 0x0400
+#define RESP_R1B 0x0500
+#define RESP_R2 0x0600
+#define RESP_R3 0x0700
+#define DATA_PRESENT 0x0800
+#define TRANSFER_READ 0x1000
+#define TRANSFER_MULTI 0x2000
+#define SECURITY_CMD 0x4000
+
+static int
+tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
+{
+ void __iomem *ctl = host->ctl;
+ struct mmc_data *data = host->data;
+ int c = cmd->opcode;
+
+ /* Command 12 is handled by hardware */
+ if (cmd->opcode == 12 && !cmd->arg) {
+ tmio_iowrite16(0x001, ctl + CTL_STOP_INTERNAL_ACTION);
+ return 0;
+ }
+
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_NONE: c |= RESP_NONE; break;
+ case MMC_RSP_R1: c |= RESP_R1; break;
+ case MMC_RSP_R1B: c |= RESP_R1B; break;
+ case MMC_RSP_R2: c |= RESP_R2; break;
+ case MMC_RSP_R3: c |= RESP_R3; break;
+ default:
+ pr_debug("Unknown response type %d\n", mmc_resp_type(cmd));
+ return -EINVAL;
+ }
+
+ host->cmd = cmd;
+
+/* FIXME - this seems to be ok comented out but the spec suggest this bit should
+ * be set when issuing app commands.
+ * if(cmd->flags & MMC_FLAG_ACMD)
+ * c |= APP_CMD;
+ */
+ if (data) {
+ c |= DATA_PRESENT;
+ if (data->blocks > 1) {
+ tmio_iowrite16(0x100, ctl + CTL_STOP_INTERNAL_ACTION);
+ c |= TRANSFER_MULTI;
+ }
+ if (data->flags & MMC_DATA_READ)
+ c |= TRANSFER_READ;
+ }
+
+ enable_mmc_irqs(ctl, TMIO_MASK_CMD);
+
+ /* Fire off the command */
+ tmio_iowrite32(cmd->arg, ctl + CTL_ARG_REG);
+ tmio_iowrite16(c, ctl + CTL_SD_CMD);
+
+ return 0;
+}
+
+/* This chip always returns (at least?) as much data as you ask for.
+ * I'm unsure what happens if you ask for less than a block. This should be
+ * looked into to ensure that a funny length read doesnt hose the controller.
+ *
+ */
+static inline void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
+{
+ void __iomem *ctl = host->ctl;
+ struct mmc_data *data = host->data;
+ unsigned short *buf;
+ unsigned int count;
+ unsigned long flags;
+
+ if (!data) {
+ pr_debug("Spurious PIO IRQ\n");
+ return;
+ }
+
+ buf = (unsigned short *)(tmio_mmc_kmap_atomic(host, &flags) +
+ host->sg_off);
+
+ count = host->sg_ptr->length - host->sg_off;
+ if (count > data->blksz)
+ count = data->blksz;
+
+ pr_debug("count: %08x offset: %08x flags %08x\n",
+ count, host->sg_off, data->flags);
+
+ /* Transfer the data */
+ if (data->flags & MMC_DATA_READ)
+ tmio_ioread16_rep(ctl + CTL_SD_DATA_PORT, buf, count >> 1);
+ else
+ tmio_iowrite16_rep(ctl + CTL_SD_DATA_PORT, buf, count >> 1);
+
+ host->sg_off += count;
+
+ tmio_mmc_kunmap_atomic(host, &flags);
+
+ if (host->sg_off == host->sg_ptr->length)
+ tmio_mmc_next_sg(host);
+
+ return;
+}
+
+static inline void tmio_mmc_data_irq(struct tmio_mmc_host *host)
+{
+ void __iomem *ctl = host->ctl;
+ struct mmc_data *data = host->data;
+ struct mmc_command *stop = data->stop;
+
+ host->data = NULL;
+
+ if (!data) {
+ pr_debug("Spurious data end IRQ\n");
+ return;
+ }
+
+ /* FIXME - return correct transfer count on errors */
+ if (!data->error)
+ data->bytes_xfered = data->blocks * data->blksz;
+ else
+ data->bytes_xfered = 0;
+
+ pr_debug("Completed data request\n");
+
+ /*FIXME - other drivers allow an optional stop command of any given type
+ * which we dont do, as the chip can auto generate them.
+ * Perhaps we can be smarter about when to use auto CMD12 and
+ * only issue the auto request when we know this is the desired
+ * stop command, allowing fallback to the stop command the
+ * upper layers expect. For now, we do what works.
+ */
+
+ if (data->flags & MMC_DATA_READ)
+ disable_mmc_irqs(ctl, TMIO_MASK_READOP);
+ else
+ disable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
+
+ if (stop) {
+ if (stop->opcode == 12 && !stop->arg)
+ tmio_iowrite16(0x000, ctl + CTL_STOP_INTERNAL_ACTION);
+ else
+ BUG();
+ }
+
+ tmio_mmc_finish_request(host);
+}
+
+static inline void tmio_mmc_cmd_irq(struct tmio_mmc_host *host,
+ unsigned int stat)
+{
+ void __iomem *ctl = host->ctl, *addr;
+ struct mmc_command *cmd = host->cmd;
+ int i;
+
+ if (!host->cmd) {
+ pr_debug("Spurious CMD irq\n");
+ return;
+ }
+
+ host->cmd = NULL;
+
+ /* This controller is sicker than the PXA one. Not only do we need to
+ * drop the top 8 bits of the first response word, we also need to
+ * modify the order of the response for short response command types.
+ */
+
+ for (i = 3, addr = ctl + CTL_RESPONSE ; i >= 0 ; i--, addr += 4)
+ cmd->resp[i] = tmio_ioread32(addr);
+
+ if (cmd->flags & MMC_RSP_136) {
+ cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24);
+ cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24);
+ cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24);
+ cmd->resp[3] <<= 8;
+ } else if (cmd->flags & MMC_RSP_R3) {
+ cmd->resp[0] = cmd->resp[3];
+ }
+
+ if (stat & TMIO_STAT_CMDTIMEOUT)
+ cmd->error = -ETIMEDOUT;
+ else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC)
+ cmd->error = -EILSEQ;
+
+ /* If there is data to handle we enable data IRQs here, and
+ * we will ultimatley finish the request in the data_end handler.
+ * If theres no data or we encountered an error, finish now.
+ */
+ if (host->data && !cmd->error) {
+ if (host->data->flags & MMC_DATA_READ)
+ enable_mmc_irqs(ctl, TMIO_MASK_READOP);
+ else
+ enable_mmc_irqs(ctl, TMIO_MASK_WRITEOP);
+ } else {
+ tmio_mmc_finish_request(host);
+ }
+
+ return;
+}
+
+
+static irqreturn_t tmio_mmc_irq(int irq, void *devid)
+{
+ struct tmio_mmc_host *host = devid;
+ void __iomem *ctl = host->ctl;
+ unsigned int ireg, irq_mask, status;
+
+ pr_debug("MMC IRQ begin\n");
+
+ status = tmio_ioread32(ctl + CTL_STATUS);
+ irq_mask = tmio_ioread32(ctl + CTL_IRQ_MASK);
+ ireg = status & TMIO_MASK_IRQ & ~irq_mask;
+
+ pr_debug_status(status);
+ pr_debug_status(ireg);
+
+ if (!ireg) {
+ disable_mmc_irqs(ctl, status & ~irq_mask);
+
+ pr_debug("tmio_mmc: Spurious irq, disabling! "
+ "0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg);
+ pr_debug_status(status);
+
+ goto out;
+ }
+
+ while (ireg) {
+ /* Card insert / remove attempts */
+ if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
+ ack_mmc_irqs(ctl, TMIO_STAT_CARD_INSERT |
+ TMIO_STAT_CARD_REMOVE);
+ mmc_detect_change(host->mmc, 0);
+ }
+
+ /* CRC and other errors */
+/* if (ireg & TMIO_STAT_ERR_IRQ)
+ * handled |= tmio_error_irq(host, irq, stat);
+ */
+
+ /* Command completion */
+ if (ireg & TMIO_MASK_CMD) {
+ ack_mmc_irqs(ctl, TMIO_MASK_CMD);
+ tmio_mmc_cmd_irq(host, status);
+ }
+
+ /* Data transfer */
+ if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) {
+ ack_mmc_irqs(ctl, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ);
+ tmio_mmc_pio_irq(host);
+ }
+
+ /* Data transfer completion */
+ if (ireg & TMIO_STAT_DATAEND) {
+ ack_mmc_irqs(ctl, TMIO_STAT_DATAEND);
+ tmio_mmc_data_irq(host);
+ }
+
+ /* Check status - keep going until we've handled it all */
+ status = tmio_ioread32(ctl + CTL_STATUS);
+ irq_mask = tmio_ioread32(ctl + CTL_IRQ_MASK);
+ ireg = status & TMIO_MASK_IRQ & ~irq_mask;
+
+ pr_debug("Status at end of loop: %08x\n", status);
+ pr_debug_status(status);
+ }
+ pr_debug("MMC IRQ end\n");
+
+out:
+ return IRQ_HANDLED;
+}
+
+static int tmio_mmc_start_data(struct tmio_mmc_host *host,
+ struct mmc_data *data)
+{
+ void __iomem *ctl = host->ctl;
+
+ pr_debug("setup data transfer: blocksize %08x nr_blocks %d\n",
+ data->blksz, data->blocks);
+
+ /* Hardware cannot perform 1 and 2 byte requests in 4 bit mode */
+ if (data->blksz < 4 && host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) {
+ printk(KERN_ERR "%s: %d byte block unsupported in 4 bit mode\n",
+ mmc_hostname(host->mmc), data->blksz);
+ return -EINVAL;
+ }
+
+ tmio_mmc_init_sg(host, data);
+ host->data = data;
+
+ /* Set transfer length / blocksize */
+ tmio_iowrite16(data->blksz, ctl + CTL_SD_XFER_LEN);
+ tmio_iowrite16(data->blocks, ctl + CTL_XFER_BLK_COUNT);
+
+ return 0;
+}
+
+/* Process requests from the MMC layer */
+static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct tmio_mmc_host *host = mmc_priv(mmc);
+ int ret;
+
+ if (host->mrq)
+ pr_debug("request not null\n");
+
+ host->mrq = mrq;
+
+ if (mrq->data) {
+ ret = tmio_mmc_start_data(host, mrq->data);
+ if (ret)
+ goto fail;
+ }
+
+ ret = tmio_mmc_start_command(host, mrq->cmd);
+
+ if (!ret)
+ return;
+
+fail:
+ mrq->cmd->error = ret;
+ mmc_request_done(mmc, mrq);
+}
+
+/* Set MMC clock / power.
+ * Note: This controller uses a simple divider scheme therefore it cannot
+ * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
+ * MMC wont run that fast, it has to be clocked at 12MHz which is the next
+ * slowest setting.
+ */
+static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct tmio_mmc_host *host = mmc_priv(mmc);
+ void __iomem *cnf = host->cnf;
+ void __iomem *ctl = host->ctl;
+
+ if (ios->clock)
+ tmio_mmc_set_clock(host, ios->clock);
+
+ /* Power sequence - OFF -> ON -> UP */
+ switch (ios->power_mode) {
+ case MMC_POWER_OFF: /* power down SD bus */
+ tmio_iowrite8(0x00, cnf + CNF_PWR_CTL_2);
+ tmio_mmc_clk_stop(host);
+ break;
+ case MMC_POWER_ON: /* power up SD bus */
+
+ tmio_iowrite8(0x02, cnf + CNF_PWR_CTL_2);
+ break;
+ case MMC_POWER_UP: /* start bus clock */
+ tmio_mmc_clk_start(host);
+ break;
+ }
+
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_1:
+ tmio_iowrite16(0x80e0, ctl + CTL_SD_MEM_CARD_OPT);
+ break;
+ case MMC_BUS_WIDTH_4:
+ tmio_iowrite16(0x00e0, ctl + CTL_SD_MEM_CARD_OPT);
+ break;
+ }
+
+ /* Let things settle. delay taken from winCE driver */
+ udelay(140);
+}
+
+static int tmio_mmc_get_ro(struct mmc_host *mmc)
+{
+ struct tmio_mmc_host *host = mmc_priv(mmc);
+ void __iomem *ctl = host->ctl;
+
+ return (tmio_ioread16(ctl + CTL_STATUS) & TMIO_STAT_WRPROTECT) ? 0 : 1;
+}
+
+static struct mmc_host_ops tmio_mmc_ops = {
+ .request = tmio_mmc_request,
+ .set_ios = tmio_mmc_set_ios,
+ .get_ro = tmio_mmc_get_ro,
+};
+
+#ifdef CONFIG_PM
+static int tmio_mmc_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+ struct mmc_host *mmc = platform_get_drvdata(dev);
+ int ret;
+
+ ret = mmc_suspend_host(mmc, state);
+
+ /* Tell MFD core it can disable us now.*/
+ if (!ret && cell->disable)
+ cell->disable(dev);
+
+ return ret;
+}
+
+static int tmio_mmc_resume(struct platform_device *dev)
+{
+ struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+ struct mmc_host *mmc = platform_get_drvdata(dev);
+ struct tmio_mmc_host *host = mmc_priv(mmc);
+ void __iomem *cnf = host->cnf;
+ int ret = 0;
+
+ /* Enable the MMC/SD Control registers */
+ tmio_iowrite16(SDCREN, cnf + CNF_CMD);
+ tmio_iowrite32(dev->resource[0].start & 0xfffe, cnf + CNF_CTL_BASE);
+
+ /* Tell the MFD core we are ready to be enabled */
+ if (cell->enable) {
+ ret = cell->enable(dev);
+ if (ret)
+ goto out;
+ }
+
+ mmc_resume_host(mmc);
+
+out:
+ return ret;
+}
+#else
+#define tmio_mmc_suspend NULL
+#define tmio_mmc_resume NULL
+#endif
+
+static int __devinit tmio_mmc_probe(struct platform_device *dev)
+{
+ struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+ struct resource *res_ctl, *res_cnf;
+ struct tmio_mmc_host *host;
+ struct mmc_host *mmc;
+ int ret = -ENOMEM;
+
+ if (dev->num_resources != 3)
+ goto out;
+
+ res_ctl = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ res_cnf = platform_get_resource(dev, IORESOURCE_MEM, 1);
+ if (!res_ctl || !res_cnf) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &dev->dev);
+ if (!mmc)
+ goto out;
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+ platform_set_drvdata(dev, mmc);
+
+ host->ctl = ioremap(res_ctl->start, res_ctl->end - res_ctl->start);
+ if (!host->ctl)
+ goto host_free;
+
+ host->cnf = ioremap(res_cnf->start, res_cnf->end - res_cnf->start);
+ if (!host->cnf)
+ goto unmap_ctl;
+
+ mmc->ops = &tmio_mmc_ops;
+ mmc->caps = MMC_CAP_4_BIT_DATA;
+ mmc->f_min = 46875; /* 24000000 / 512 */
+ mmc->f_max = 24000000;
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+ /* Enable the MMC/SD Control registers */
+ tmio_iowrite16(SDCREN, host->cnf + CNF_CMD);
+ tmio_iowrite32(dev->resource[0].start & 0xfffe,
+ host->cnf + CNF_CTL_BASE);
+
+ /* Tell the MFD core we are ready to be enabled */
+ if (cell->enable) {
+ ret = cell->enable(dev);
+ if (ret)
+ goto unmap_cnf;
+ }
+
+ /* Disable SD power during suspend */
+ tmio_iowrite8(0x01, host->cnf + CNF_PWR_CTL_3);
+
+ /* The below is required but why? FIXME */
+ tmio_iowrite8(0x1f, host->cnf + CNF_STOP_CLK_CTL);
+
+ /* Power down SD bus*/
+ tmio_iowrite8(0x0, host->cnf + CNF_PWR_CTL_2);
+
+ tmio_mmc_clk_stop(host);
+ reset(host);
+
+ ret = platform_get_irq(dev, 0);
+ if (ret >= 0)
+ host->irq = ret;
+ else
+ goto unmap_cnf;
+
+ disable_mmc_irqs(host->ctl, TMIO_MASK_ALL);
+
+ ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED, "tmio-mmc",
+ host);
+ if (ret)
+ goto unmap_cnf;
+
+ set_irq_type(host->irq, IRQ_TYPE_EDGE_FALLING);
+
+ mmc_add_host(mmc);
+
+ printk(KERN_INFO "%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc),
+ (unsigned long)host->ctl, host->irq);
+
+ /* Unmask the IRQs we want to know about */
+ enable_mmc_irqs(host->ctl, TMIO_MASK_IRQ);
+
+ return 0;
+
+unmap_cnf:
+ iounmap(host->cnf);
+unmap_ctl:
+ iounmap(host->ctl);
+host_free:
+ mmc_free_host(mmc);
+out:
+ return ret;
+}
+
+static int __devexit tmio_mmc_remove(struct platform_device *dev)
+{
+ struct mmc_host *mmc = platform_get_drvdata(dev);
+
+ platform_set_drvdata(dev, NULL);
+
+ if (mmc) {
+ struct tmio_mmc_host *host = mmc_priv(mmc);
+ mmc_remove_host(mmc);
+ mmc_free_host(mmc);
+ free_irq(host->irq, host);
+ iounmap(host->ctl);
+ iounmap(host->cnf);
+ }
+
+ return 0;
+}
+
+/* ------------------- device registration ----------------------- */
+
+static struct platform_driver tmio_mmc_driver = {
+ .driver = {
+ .name = "tmio-mmc",
+ .owner = THIS_MODULE,
+ },
+ .probe = tmio_mmc_probe,
+ .remove = __devexit_p(tmio_mmc_remove),
+ .suspend = tmio_mmc_suspend,
+ .resume = tmio_mmc_resume,
+};
+
+
+static int __init tmio_mmc_init(void)
+{
+ return platform_driver_register(&tmio_mmc_driver);
+}
+
+static void __exit tmio_mmc_exit(void)
+{
+ platform_driver_unregister(&tmio_mmc_driver);
+}
+
+module_init(tmio_mmc_init);
+module_exit(tmio_mmc_exit);
+
+MODULE_DESCRIPTION("Toshiba TMIO SD/MMC driver");
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:tmio-mmc");
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
new file mode 100644
index 0000000..9e647a0
--- /dev/null
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -0,0 +1,194 @@
+/* Definitons for use with the tmio_mmc.c
+ *
+ * (c) 2004 Ian Molton <spyro@f2s.com>
+ * (c) 2007 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#define CNF_CMD 0x04
+#define CNF_CTL_BASE 0x10
+#define CNF_INT_PIN 0x3d
+#define CNF_STOP_CLK_CTL 0x40
+#define CNF_GCLK_CTL 0x41
+#define CNF_SD_CLK_MODE 0x42
+#define CNF_PIN_STATUS 0x44
+#define CNF_PWR_CTL_1 0x48
+#define CNF_PWR_CTL_2 0x49
+#define CNF_PWR_CTL_3 0x4a
+#define CNF_CARD_DETECT_MODE 0x4c
+#define CNF_SD_SLOT 0x50
+#define CNF_EXT_GCLK_CTL_1 0xf0
+#define CNF_EXT_GCLK_CTL_2 0xf1
+#define CNF_EXT_GCLK_CTL_3 0xf9
+#define CNF_SD_LED_EN_1 0xfa
+#define CNF_SD_LED_EN_2 0xfe
+
+#define SDCREN 0x2 /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
+
+#define CTL_SD_CMD 0x00
+#define CTL_ARG_REG 0x04
+#define CTL_STOP_INTERNAL_ACTION 0x08
+#define CTL_XFER_BLK_COUNT 0xa
+#define CTL_RESPONSE 0x0c
+#define CTL_STATUS 0x1c
+#define CTL_IRQ_MASK 0x20
+#define CTL_SD_CARD_CLK_CTL 0x24
+#define CTL_SD_XFER_LEN 0x26
+#define CTL_SD_MEM_CARD_OPT 0x28
+#define CTL_SD_ERROR_DETAIL_STATUS 0x2c
+#define CTL_SD_DATA_PORT 0x30
+#define CTL_TRANSACTION_CTL 0x34
+#define CTL_RESET_SD 0xe0
+#define CTL_SDIO_REGS 0x100
+#define CTL_CLK_AND_WAIT_CTL 0x138
+#define CTL_RESET_SDIO 0x1e0
+
+/* Definitions for values the CTRL_STATUS register can take. */
+#define TMIO_STAT_CMDRESPEND 0x00000001
+#define TMIO_STAT_DATAEND 0x00000004
+#define TMIO_STAT_CARD_REMOVE 0x00000008
+#define TMIO_STAT_CARD_INSERT 0x00000010
+#define TMIO_STAT_SIGSTATE 0x00000020
+#define TMIO_STAT_WRPROTECT 0x00000080
+#define TMIO_STAT_CARD_REMOVE_A 0x00000100
+#define TMIO_STAT_CARD_INSERT_A 0x00000200
+#define TMIO_STAT_SIGSTATE_A 0x00000400
+#define TMIO_STAT_CMD_IDX_ERR 0x00010000
+#define TMIO_STAT_CRCFAIL 0x00020000
+#define TMIO_STAT_STOPBIT_ERR 0x00040000
+#define TMIO_STAT_DATATIMEOUT 0x00080000
+#define TMIO_STAT_RXOVERFLOW 0x00100000
+#define TMIO_STAT_TXUNDERRUN 0x00200000
+#define TMIO_STAT_CMDTIMEOUT 0x00400000
+#define TMIO_STAT_RXRDY 0x01000000
+#define TMIO_STAT_TXRQ 0x02000000
+#define TMIO_STAT_ILL_FUNC 0x20000000
+#define TMIO_STAT_CMD_BUSY 0x40000000
+#define TMIO_STAT_ILL_ACCESS 0x80000000
+
+/* Define some IRQ masks */
+/* This is the mask used at reset by the chip */
+#define TMIO_MASK_ALL 0x837f031d
+#define TMIO_MASK_READOP (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND | \
+ TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
+#define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND | \
+ TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
+#define TMIO_MASK_CMD (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT | \
+ TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT)
+#define TMIO_MASK_IRQ (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD)
+
+#define enable_mmc_irqs(ctl, i) \
+ do { \
+ u32 mask;\
+ mask = tmio_ioread32((ctl) + CTL_IRQ_MASK); \
+ mask &= ~((i) & TMIO_MASK_IRQ); \
+ tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \
+ } while (0)
+
+#define disable_mmc_irqs(ctl, i) \
+ do { \
+ u32 mask;\
+ mask = tmio_ioread32((ctl) + CTL_IRQ_MASK); \
+ mask |= ((i) & TMIO_MASK_IRQ); \
+ tmio_iowrite32(mask, (ctl) + CTL_IRQ_MASK); \
+ } while (0)
+
+#define ack_mmc_irqs(ctl, i) \
+ do { \
+ u32 mask;\
+ mask = tmio_ioread32((ctl) + CTL_STATUS); \
+ mask &= ~((i) & TMIO_MASK_IRQ); \
+ tmio_iowrite32(mask, (ctl) + CTL_STATUS); \
+ } while (0)
+
+
+struct tmio_mmc_host {
+ void __iomem *cnf;
+ void __iomem *ctl;
+ struct mmc_command *cmd;
+ struct mmc_request *mrq;
+ struct mmc_data *data;
+ struct mmc_host *mmc;
+ int irq;
+
+ /* pio related stuff */
+ struct scatterlist *sg_ptr;
+ unsigned int sg_len;
+ unsigned int sg_off;
+};
+
+#include <linux/scatterlist.h>
+#include <linux/blkdev.h>
+
+static inline void tmio_mmc_init_sg(struct tmio_mmc_host *host,
+ struct mmc_data *data)
+{
+ host->sg_len = data->sg_len;
+ host->sg_ptr = data->sg;
+ host->sg_off = 0;
+}
+
+static inline int tmio_mmc_next_sg(struct tmio_mmc_host *host)
+{
+ host->sg_ptr = sg_next(host->sg_ptr);
+ host->sg_off = 0;
+ return --host->sg_len;
+}
+
+static inline char *tmio_mmc_kmap_atomic(struct tmio_mmc_host *host,
+ unsigned long *flags)
+{
+ struct scatterlist *sg = host->sg_ptr;
+
+ local_irq_save(*flags);
+ return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
+}
+
+static inline void tmio_mmc_kunmap_atomic(struct tmio_mmc_host *host,
+ unsigned long *flags)
+{
+ kunmap_atomic(sg_page(host->sg_ptr), KM_BIO_SRC_IRQ);
+ local_irq_restore(*flags);
+}
+
+#ifdef CONFIG_MMC_DEBUG
+
+#define STATUS_TO_TEXT(a) \
+ do { \
+ if (status & TMIO_STAT_##a) \
+ printf(#a); \
+ } while (0)
+
+void debug_status(u32 status)
+{
+ printk(KERN_DEBUG "status: %08x = ", status);
+ STATUS_TO_TEXT(CARD_REMOVE);
+ STATUS_TO_TEXT(CARD_INSERT);
+ STATUS_TO_TEXT(SIGSTATE);
+ STATUS_TO_TEXT(WRPROTECT);
+ STATUS_TO_TEXT(CARD_REMOVE_A);
+ STATUS_TO_TEXT(CARD_INSERT_A);
+ STATUS_TO_TEXT(SIGSTATE_A);
+ STATUS_TO_TEXT(CMD_IDX_ERR);
+ STATUS_TO_TEXT(STOPBIT_ERR);
+ STATUS_TO_TEXT(ILL_FUNC);
+ STATUS_TO_TEXT(CMD_BUSY);
+ STATUS_TO_TEXT(CMDRESPEND);
+ STATUS_TO_TEXT(DATAEND);
+ STATUS_TO_TEXT(CRCFAIL);
+ STATUS_TO_TEXT(DATATIMEOUT);
+ STATUS_TO_TEXT(CMDTIMEOUT);
+ STATUS_TO_TEXT(RXOVERFLOW);
+ STATUS_TO_TEXT(TXUNDERRUN);
+ STATUS_TO_TEXT(RXRDY);
+ STATUS_TO_TEXT(TXRQ);
+ STATUS_TO_TEXT(ILL_ACCESS);
+ printk("\n");
+}
+
+#else
+#define pr_debug_status(s) do { } while (0)
+#endif
OpenPOWER on IntegriCloud