diff options
| author | Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> | 2015-01-13 04:59:14 +0000 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2015-01-20 10:23:31 +0100 |
| commit | 361936ef037b44dd10da1c25d426ba54796b183c (patch) | |
| tree | 289f112a01d83c4f88f28eac33db5aedfa1984b9 /drivers/mmc/host/tmio_mmc_dma.c | |
| parent | 5add2aca3a8555a01f5e43b6f524df6fae8fffa5 (diff) | |
| download | op-kernel-dev-361936ef037b44dd10da1c25d426ba54796b183c.zip op-kernel-dev-361936ef037b44dd10da1c25d426ba54796b183c.tar.gz | |
mmc: tmio: enable SoC specific DMA buswidth settings
Renesas SDHI which is based on TMIO driver has 2 type SoC. 1st one is
used as SH-Mobile series, and 2nd is R-Car series. R-Car series SoC has
DMA buswidth setting register which enables 32bit access.
This patch adds .dma_buswidth and enables it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc/host/tmio_mmc_dma.c')
| -rw-r--r-- | drivers/mmc/host/tmio_mmc_dma.c | 8 |
1 files changed, 6 insertions, 2 deletions
diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c index eb6b45c..aa5f4b6 100644 --- a/drivers/mmc/host/tmio_mmc_dma.c +++ b/drivers/mmc/host/tmio_mmc_dma.c @@ -293,7 +293,9 @@ void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdat cfg.slave_id = host->dma->slave_id_tx; cfg.direction = DMA_MEM_TO_DEV; cfg.dst_addr = res->start + (CTL_SD_DATA_PORT << host->bus_shift); - cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + cfg.dst_addr_width = host->dma->dma_buswidth; + if (!cfg.dst_addr_width) + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; cfg.src_addr = 0; ret = dmaengine_slave_config(host->chan_tx, &cfg); if (ret < 0) @@ -312,7 +314,9 @@ void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdat cfg.slave_id = host->dma->slave_id_rx; cfg.direction = DMA_DEV_TO_MEM; cfg.src_addr = cfg.dst_addr + host->pdata->dma_rx_offset; - cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + cfg.src_addr_width = host->dma->dma_buswidth; + if (!cfg.src_addr_width) + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; cfg.dst_addr = 0; ret = dmaengine_slave_config(host->chan_rx, &cfg); if (ret < 0) |
