diff options
| author | Arindam Nath <arindam.nath@amd.com> | 2011-05-05 12:19:07 +0530 |
|---|---|---|
| committer | Chris Ball <cjb@laptop.org> | 2011-05-24 23:53:48 -0400 |
| commit | cf2b5eea1ea0ff9b3184bc6771bcb93a9fdcd1d9 (patch) | |
| tree | 36288f760fb7556952f8365c3c0cad6b445b04f6 /drivers/mmc/host/sdhci.h | |
| parent | c3ed3877625f10d600b0eca2ca48a68c46aed660 (diff) | |
| download | op-kernel-dev-cf2b5eea1ea0ff9b3184bc6771bcb93a9fdcd1d9.zip op-kernel-dev-cf2b5eea1ea0ff9b3184bc6771bcb93a9fdcd1d9.tar.gz | |
mmc: sdhci: add support for retuning mode 1
Host Controller v3.00 can support retuning modes 1,2 or 3 depending on
the bits 46-47 of the Capabilities register. Also, the timer count for
retuning is indicated by bits 40-43 of the same register. We initialize
timer_list for retuning the first time we execute tuning procedure. This
condition is indicated by SDHCI_NEEDS_RETUNING not being set. Since
retuning mode 1 sets a limit of 4MB on the maximum data length, we set
max_blk_count appropriately. Once the tuning timer expires, we set
SDHCI_NEEDS_RETUNING flag, and if the flag is set, we execute tuning
procedure before sending the next command. We need to restore mmc_request
structure after executing retuning procedure since host->mrq is used
inside the procedure to send CMD19. We also disable and re-enable this
flag during suspend and resume respectively, as per the spec v3.00.
Tested by Zhangfei Gao with a Toshiba uhs card and general hs card,
on mmp2 in SDMA mode.
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Reviewed-by: Philip Rakity <prakity@marvell.com>
Tested-by: Philip Rakity <prakity@marvell.com>
Acked-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Diffstat (limited to 'drivers/mmc/host/sdhci.h')
| -rw-r--r-- | drivers/mmc/host/sdhci.h | 6 |
1 files changed, 5 insertions, 1 deletions
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 6b0a0ee..8ea11b7 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -191,7 +191,11 @@ #define SDHCI_DRIVER_TYPE_A 0x00000010 #define SDHCI_DRIVER_TYPE_C 0x00000020 #define SDHCI_DRIVER_TYPE_D 0x00000040 -#define SDHCI_USE_SDR50_TUNING 0x00002000 +#define SDHCI_RETUNING_TIMER_COUNT_MASK 0x00000F00 +#define SDHCI_RETUNING_TIMER_COUNT_SHIFT 8 +#define SDHCI_USE_SDR50_TUNING 0x00002000 +#define SDHCI_RETUNING_MODE_MASK 0x0000C000 +#define SDHCI_RETUNING_MODE_SHIFT 14 #define SDHCI_CLOCK_MUL_MASK 0x00FF0000 #define SDHCI_CLOCK_MUL_SHIFT 16 |
