Merge tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC update from Chris Ball:
 "MMC highlights for 3.9:

  Core:
   - Support for packed commands in eMMC 4.5.  (This requires a host
     capability to be turned on.  It increases write throughput by 20%+,
     but may also increase average write latency; more testing needed.)
   - Add DT bindings for capability flags.
   - Add mmc_of_parse() for shared DT parsing between drivers.

  Drivers:
   - android-goldfish: New MMC driver for the Android Goldfish emulator.
   - mvsdio: Add DT bindings, pinctrl, use slot-gpio for card detection.
   - omap_hsmmc: Fix boot hangs with RPMB partitions.
   - sdhci-bcm2835: New driver for controller used by Raspberry Pi.
   - sdhci-esdhc-imx: Add 8-bit data, auto CMD23 support, use slot-gpio.
   - sh_mmcif: Add support for eMMC DDR, bundled MMCIF IRQs.
   - tmio_mmc: Add DT bindings, support for vccq regulator"

* tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (92 commits)
  mmc: tegra: assume CONFIG_OF, remove platform data
  mmc: add DT bindings for more MMC capability flags
  mmc: tmio: add support for the VccQ regulator
  mmc: tmio: remove unused and deprecated symbols
  mmc: sh_mobile_sdhi: use managed resource allocations
  mmc: sh_mobile_sdhi: remove unused .pdata field
  mmc: tmio-mmc: parse device-tree bindings
  mmc: tmio-mmc: define device-tree bindings
  mmc: sh_mmcif: use mmc_of_parse() to parse standard MMC DT bindings
  mmc: (cosmetic) remove "extern" from function declarations
  mmc: provide a standard MMC device-tree binding parser centrally
  mmc: detailed definition of CD and WP MMC line polarities in DT
  mmc: sdhi, tmio: only check flags in tmio-mmc driver proper
  mmc: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch()
  mmc: sdhci: check voltage range only on regulators aware of voltage value
  mmc: bcm2835: set SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
  mmc: support packed write command for eMMC4.5 devices
  mmc: add packed command feature of eMMC4.5
  mmc: rtsx: remove driving adjustment
  mmc: use regulator_can_change_voltage() instead of regulator_count_voltages
  ...

1 files changed, 210 insertions, 0 deletions

diff --git a/drivers/mmc/host/sdhci-bcm2835.c b/drivers/mmc/host/sdhci-bcm2835.c
new file mode 100644
index 0000000..8ffea05
--- /dev/null
+++ b/drivers/mmc/host/sdhci-bcm2835.c
@@ -0,0 +1,210 @@
+/*
+ * BCM2835 SDHCI
+ * Copyright (C) 2012 Stephen Warren
+ * Based on U-Boot's MMC driver for the BCM2835 by Oleksandr Tymoshenko & me
+ * Portions of the code there were obviously based on the Linux kernel at:
+ * git://github.com/raspberrypi/linux.git rpi-3.6.y
+ * commit f5b930b "Main bcm2708 linux port" signed-off-by Dom Cobley.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/mmc/host.h>
+#include "sdhci-pltfm.h"
+
+/*
+ * 400KHz is max freq for card ID etc. Use that as min card clock. We need to
+ * know the min to enable static calculation of max BCM2835_SDHCI_WRITE_DELAY.
+ */
+#define MIN_FREQ 400000
+
+/*
+ * The Arasan has a bugette whereby it may lose the content of successive
+ * writes to registers that are within two SD-card clock cycles of each other
+ * (a clock domain crossing problem). It seems, however, that the data
+ * register does not have this problem, which is just as well - otherwise we'd
+ * have to nobble the DMA engine too.
+ *
+ * This should probably be dynamically calculated based on the actual card
+ * frequency. However, this is the longest we'll have to wait, and doesn't
+ * seem to slow access down too much, so the added complexity doesn't seem
+ * worth it for now.
+ *
+ * 1/MIN_FREQ is (max) time per tick of eMMC clock.
+ * 2/MIN_FREQ is time for two ticks.
+ * Multiply by 1000000 to get uS per two ticks.
+ * *1000000 for uSecs.
+ * +1 for hack rounding.
+ */
+#define BCM2835_SDHCI_WRITE_DELAY	(((2 * 1000000) / MIN_FREQ) + 1)
+
+struct bcm2835_sdhci {
+	u32 shadow;
+};
+
+static void bcm2835_sdhci_writel(struct sdhci_host *host, u32 val, int reg)
+{
+	writel(val, host->ioaddr + reg);
+
+	udelay(BCM2835_SDHCI_WRITE_DELAY);
+}
+
+static inline u32 bcm2835_sdhci_readl(struct sdhci_host *host, int reg)
+{
+	u32 val = readl(host->ioaddr + reg);
+
+	if (reg == SDHCI_CAPABILITIES)
+		val |= SDHCI_CAN_VDD_330;
+
+	return val;
+}
+
+static void bcm2835_sdhci_writew(struct sdhci_host *host, u16 val, int reg)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct bcm2835_sdhci *bcm2835_host = pltfm_host->priv;
+	u32 oldval = (reg == SDHCI_COMMAND) ? bcm2835_host->shadow :
+		bcm2835_sdhci_readl(host, reg & ~3);
+	u32 word_num = (reg >> 1) & 1;
+	u32 word_shift = word_num * 16;
+	u32 mask = 0xffff << word_shift;
+	u32 newval = (oldval & ~mask) | (val << word_shift);
+
+	if (reg == SDHCI_TRANSFER_MODE)
+		bcm2835_host->shadow = newval;
+	else
+		bcm2835_sdhci_writel(host, newval, reg & ~3);
+}
+
+static u16 bcm2835_sdhci_readw(struct sdhci_host *host, int reg)
+{
+	u32 val = bcm2835_sdhci_readl(host, (reg & ~3));
+	u32 word_num = (reg >> 1) & 1;
+	u32 word_shift = word_num * 16;
+	u32 word = (val >> word_shift) & 0xffff;
+
+	return word;
+}
+
+static void bcm2835_sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+	u32 oldval = bcm2835_sdhci_readl(host, reg & ~3);
+	u32 byte_num = reg & 3;
+	u32 byte_shift = byte_num * 8;
+	u32 mask = 0xff << byte_shift;
+	u32 newval = (oldval & ~mask) | (val << byte_shift);
+
+	bcm2835_sdhci_writel(host, newval, reg & ~3);
+}
+
+static u8 bcm2835_sdhci_readb(struct sdhci_host *host, int reg)
+{
+	u32 val = bcm2835_sdhci_readl(host, (reg & ~3));
+	u32 byte_num = reg & 3;
+	u32 byte_shift = byte_num * 8;
+	u32 byte = (val >> byte_shift) & 0xff;
+
+	return byte;
+}
+
+unsigned int bcm2835_sdhci_get_min_clock(struct sdhci_host *host)
+{
+	return MIN_FREQ;
+}
+
+static struct sdhci_ops bcm2835_sdhci_ops = {
+	.write_l = bcm2835_sdhci_writel,
+	.write_w = bcm2835_sdhci_writew,
+	.write_b = bcm2835_sdhci_writeb,
+	.read_l = bcm2835_sdhci_readl,
+	.read_w = bcm2835_sdhci_readw,
+	.read_b = bcm2835_sdhci_readb,
+	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
+	.get_min_clock = bcm2835_sdhci_get_min_clock,
+};
+
+static struct sdhci_pltfm_data bcm2835_sdhci_pdata = {
+	.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
+		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK,
+	.ops = &bcm2835_sdhci_ops,
+};
+
+static int bcm2835_sdhci_probe(struct platform_device *pdev)
+{
+	struct sdhci_host *host;
+	struct bcm2835_sdhci *bcm2835_host;
+	struct sdhci_pltfm_host *pltfm_host;
+	int ret;
+
+	host = sdhci_pltfm_init(pdev, &bcm2835_sdhci_pdata);
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	bcm2835_host = devm_kzalloc(&pdev->dev, sizeof(*bcm2835_host),
+					GFP_KERNEL);
+	if (!bcm2835_host) {
+		dev_err(mmc_dev(host->mmc),
+			"failed to allocate bcm2835_sdhci\n");
+		return -ENOMEM;
+	}
+
+	pltfm_host = sdhci_priv(host);
+	pltfm_host->priv = bcm2835_host;
+
+	pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(pltfm_host->clk)) {
+		ret = PTR_ERR(pltfm_host->clk);
+		goto err;
+	}
+
+	return sdhci_add_host(host);
+
+err:
+	sdhci_pltfm_free(pdev);
+	return ret;
+}
+
+static int bcm2835_sdhci_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
+
+	sdhci_remove_host(host, dead);
+	sdhci_pltfm_free(pdev);
+
+	return 0;
+}
+
+static const struct of_device_id bcm2835_sdhci_of_match[] = {
+	{ .compatible = "brcm,bcm2835-sdhci" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, bcm2835_sdhci_of_match);
+
+static struct platform_driver bcm2835_sdhci_driver = {
+	.driver = {
+		.name = "sdhci-bcm2835",
+		.owner = THIS_MODULE,
+		.of_match_table = bcm2835_sdhci_of_match,
+		.pm = SDHCI_PLTFM_PMOPS,
+	},
+	.probe = bcm2835_sdhci_probe,
+	.remove = bcm2835_sdhci_remove,
+};
+module_platform_driver(bcm2835_sdhci_driver);
+
+MODULE_DESCRIPTION("BCM2835 SDHCI driver");
+MODULE_AUTHOR("Stephen Warren");
+MODULE_LICENSE("GPL v2");