mmc: core: Fix init_card in 52Mhz

Suppose that we got a data crc error, and it triggers the mmc_reset.
mmc_reset will call mmc_send_status to see if HW reset was supported.
before issue CMD13, it will do retune, and if EMMC was in HS400 mode,
it will reduce frequency to 52Mhz firstly, then results in card init
was doing at 52Mhz.
The mmc_send_status was originally only done for mmc_test, should drop
it. And, rename the "eMMC hardware reset" to "Reset test", as we would
also be able to use the test for SD-cards.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: bd11e8bd03ca ("mmc: core: Flag re-tuning is needed on CRC errors")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

1 files changed, 0 insertions, 7 deletions

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index e726903..f6cd995 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1924,7 +1924,6 @@ EXPORT_SYMBOL(mmc_can_reset);
 static int mmc_reset(struct mmc_host *host)
 {
 	struct mmc_card *card = host->card;
-	u32 status;
 
 	if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset)
 		return -EOPNOTSUPP;
@@ -1937,12 +1936,6 @@ static int mmc_reset(struct mmc_host *host)
 
 	host->ops->hw_reset(host);
 
-	/* If the reset has happened, then a status command will fail */
-	if (!mmc_send_status(card, &status)) {
-		mmc_host_clk_release(host);
-		return -ENOSYS;
-	}
-
 	/* Set initial state and call mmc_set_ios */
 	mmc_set_initial_state(host);
 	mmc_host_clk_release(host);