mmc: core: Set correct bus mode before card init

Earlier all cards where initiated with bus mode set as OPENDRAIN, and then
later switched to PUSHPULL. According to the MMC/SD/SDIO specifications
only MMC cards use OPENDRAIN during init. For both SD and SDIO the bus
mode shall be PUSHPULL before attempting to init the card.

The consequence of having incorrect bus mode can lead to not being able
to detect the card. Therefore the default behavior have now been changed
to PUSHPULL in mmc_power_up, and will only be temporarily switched when
trying to attach or init a MMC card.

Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com>
Signed-off-by: Ulf HANSSON <ulf.hansson@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

4 files changed, 11 insertions, 9 deletions

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 5ae6b15..45ea968 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1160,13 +1160,11 @@ static void mmc_power_up(struct mmc_host *host)
 		bit = fls(host->ocr_avail) - 1;
 
 	host->ios.vdd = bit;
-	if (mmc_host_is_spi(host)) {
+	if (mmc_host_is_spi(host))
 		host->ios.chip_select = MMC_CS_HIGH;
-		host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
-	} else {
+	else
 		host->ios.chip_select = MMC_CS_DONTCARE;
-		host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
-	}
+	host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
 	host->ios.power_mode = MMC_POWER_UP;
 	host->ios.bus_width = MMC_BUS_WIDTH_1;
 	host->ios.timing = MMC_TIMING_LEGACY;
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 3b7c069..b74e6f1 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -548,6 +548,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	BUG_ON(!host);
 	WARN_ON(!host->claimed);
 
+	/* Set correct bus mode for MMC before attempting init */
+	if (!mmc_host_is_spi(host))
+		mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN);
+
 	/*
 	 * Since we're changing the OCR value, we seem to
 	 * need to tell some cards to go back to the idle
@@ -1022,6 +1026,10 @@ int mmc_attach_mmc(struct mmc_host *host)
 	BUG_ON(!host);
 	WARN_ON(!host->claimed);
 
+	/* Set correct bus mode for MMC before attempting attach */
+	if (!mmc_host_is_spi(host))
+		mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN);
+
 	err = mmc_send_op_cond(host, 0, &ocr);
 	if (err)
 		return err;
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 4c281a4..342b18c 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -929,8 +929,6 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
 		err = mmc_send_relative_addr(host, &card->rca);
 		if (err)
 			return err;
-
-		mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
 	}
 
 	if (!oldcard) {
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index ac492ac..698d813 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -408,8 +408,6 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 		 */
 		if (oldcard)
 			oldcard->rca = card->rca;
-
-		mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
 	}
 
 	/*