diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-06-10 14:35:22 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-06-10 14:35:22 -0700 |
commit | 07888238f55056605cd23aa4ea3ca97d5e15938f (patch) | |
tree | 1c89230d1d0ceab4a8b7f3a9a93a032ccca13aef /drivers/mmc/core/mmc.c | |
parent | 23adbe12ef7d3d4195e80800ab36b37bee28cd03 (diff) | |
parent | 11bc9381b277a65ea4b3fe994e658f4a78512139 (diff) | |
download | op-kernel-dev-07888238f55056605cd23aa4ea3ca97d5e15938f.zip op-kernel-dev-07888238f55056605cd23aa4ea3ca97d5e15938f.tar.gz |
Merge tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Pull MMC update from Chris Ball:
"MMC highlights for 3.16:
Core:
- support HS400 mode of eMMC 5.0, via DT bindings mmc-hs400-1_{2,8}v
- if card init at 3.3v doesn't work, try 1.8v and 1.2v too
Drivers:
- moxart: New driver for MOXA ART SoCs
- rtsx_usb_sdmmc: New driver for Realtek USB card readers
- sdhci: Large rework around IRQ/regulator handling, remove card_tasklet
- sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
- sunxi: New driver for Allwinner sunxi SoCs
- usdhi6rol0: New driver for Renesas SD/SDIO controller"
* tag 'mmc-updates-for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (95 commits)
mmc: sdhci-s3c: use mmc_of_parse and remove the card_tasklet
mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller
mmc: sdhci-of-esdhc: Fixup compile error
mmc: tegra: fix reporting of base clock frequency
mmc: tegra: disable UHS modes
mmc: sdhci-dove: use mmc_of_parse() and remove card_tasklet CD handler
MAINTAINERS: mmc: Add path to git tree
mmc: dove: fix missing MACH_DOVE dependency
mmc: sdhci: SD tuning is broken for some controllers
mmc: sdhci-esdhc-imx: fix mmc ddr mode regression issue
mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
mmc: omap_hsmmc: split omap-dma header file
mmc: omap_hsmmc: fix cmd23 multiblock read/write
mmc: omap_hsmmc: use devm_ioremap_resource
mmc: omap_hsmmc: use devm_request_threaded_irq
mmc: omap_hsmmc: use devm_request_irq
mmc: omap_hsmmc: use devm_clk_get
mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs
mmc: wmt-sdmmc: Use GFP_KERNEL instead of hard-coded value
mmc: omap: Use DIV_ROUND_UP instead of open coded
...
Diffstat (limited to 'drivers/mmc/core/mmc.c')
-rw-r--r-- | drivers/mmc/core/mmc.c | 678 |
1 files changed, 403 insertions, 275 deletions
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 1ab5f3a..793c6f7 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -240,31 +240,62 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd) static void mmc_select_card_type(struct mmc_card *card) { struct mmc_host *host = card->host; - u8 card_type = card->ext_csd.raw_card_type & EXT_CSD_CARD_TYPE_MASK; + u8 card_type = card->ext_csd.raw_card_type; u32 caps = host->caps, caps2 = host->caps2; - unsigned int hs_max_dtr = 0; + unsigned int hs_max_dtr = 0, hs200_max_dtr = 0; + unsigned int avail_type = 0; - if (card_type & EXT_CSD_CARD_TYPE_26) + if (caps & MMC_CAP_MMC_HIGHSPEED && + card_type & EXT_CSD_CARD_TYPE_HS_26) { hs_max_dtr = MMC_HIGH_26_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS_26; + } if (caps & MMC_CAP_MMC_HIGHSPEED && - card_type & EXT_CSD_CARD_TYPE_52) + card_type & EXT_CSD_CARD_TYPE_HS_52) { hs_max_dtr = MMC_HIGH_52_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS_52; + } + + if (caps & MMC_CAP_1_8V_DDR && + card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) { + hs_max_dtr = MMC_HIGH_DDR_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_DDR_1_8V; + } - if ((caps & MMC_CAP_1_8V_DDR && - card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) || - (caps & MMC_CAP_1_2V_DDR && - card_type & EXT_CSD_CARD_TYPE_DDR_1_2V)) + if (caps & MMC_CAP_1_2V_DDR && + card_type & EXT_CSD_CARD_TYPE_DDR_1_2V) { hs_max_dtr = MMC_HIGH_DDR_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_DDR_1_2V; + } + + if (caps2 & MMC_CAP2_HS200_1_8V_SDR && + card_type & EXT_CSD_CARD_TYPE_HS200_1_8V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS200_1_8V; + } + + if (caps2 & MMC_CAP2_HS200_1_2V_SDR && + card_type & EXT_CSD_CARD_TYPE_HS200_1_2V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS200_1_2V; + } + + if (caps2 & MMC_CAP2_HS400_1_8V && + card_type & EXT_CSD_CARD_TYPE_HS400_1_8V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS400_1_8V; + } - if ((caps2 & MMC_CAP2_HS200_1_8V_SDR && - card_type & EXT_CSD_CARD_TYPE_SDR_1_8V) || - (caps2 & MMC_CAP2_HS200_1_2V_SDR && - card_type & EXT_CSD_CARD_TYPE_SDR_1_2V)) - hs_max_dtr = MMC_HS200_MAX_DTR; + if (caps2 & MMC_CAP2_HS400_1_2V && + card_type & EXT_CSD_CARD_TYPE_HS400_1_2V) { + hs200_max_dtr = MMC_HS200_MAX_DTR; + avail_type |= EXT_CSD_CARD_TYPE_HS400_1_2V; + } card->ext_csd.hs_max_dtr = hs_max_dtr; - card->ext_csd.card_type = card_type; + card->ext_csd.hs200_max_dtr = hs200_max_dtr; + card->mmc_avail_type = avail_type; } /* @@ -480,6 +511,8 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) ext_csd[EXT_CSD_PWR_CL_DDR_52_195]; card->ext_csd.raw_pwr_cl_ddr_52_360 = ext_csd[EXT_CSD_PWR_CL_DDR_52_360]; + card->ext_csd.raw_pwr_cl_ddr_200_360 = + ext_csd[EXT_CSD_PWR_CL_DDR_200_360]; } if (card->ext_csd.rev >= 5) { @@ -646,7 +679,10 @@ static int mmc_compare_ext_csds(struct mmc_card *card, unsigned bus_width) (card->ext_csd.raw_pwr_cl_ddr_52_195 == bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_195]) && (card->ext_csd.raw_pwr_cl_ddr_52_360 == - bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_360])); + bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_360]) && + (card->ext_csd.raw_pwr_cl_ddr_200_360 == + bw_ext_csd[EXT_CSD_PWR_CL_DDR_200_360])); + if (err) err = -EINVAL; @@ -694,18 +730,10 @@ static struct attribute *mmc_std_attrs[] = { &dev_attr_rel_sectors.attr, NULL, }; - -static struct attribute_group mmc_std_attr_group = { - .attrs = mmc_std_attrs, -}; - -static const struct attribute_group *mmc_attr_groups[] = { - &mmc_std_attr_group, - NULL, -}; +ATTRIBUTE_GROUPS(mmc_std); static struct device_type mmc_type = { - .groups = mmc_attr_groups, + .groups = mmc_std_groups, }; /* @@ -714,17 +742,13 @@ static struct device_type mmc_type = { * extended CSD register, select it by executing the * mmc_switch command. */ -static int mmc_select_powerclass(struct mmc_card *card, - unsigned int bus_width) +static int __mmc_select_powerclass(struct mmc_card *card, + unsigned int bus_width) { - int err = 0; + struct mmc_host *host = card->host; + struct mmc_ext_csd *ext_csd = &card->ext_csd; unsigned int pwrclass_val = 0; - struct mmc_host *host; - - BUG_ON(!card); - - host = card->host; - BUG_ON(!host); + int err = 0; /* Power class selection is supported for versions >= 4.0 */ if (card->csd.mmca_vsn < CSD_SPEC_VER_4) @@ -736,14 +760,14 @@ static int mmc_select_powerclass(struct mmc_card *card, switch (1 << host->ios.vdd) { case MMC_VDD_165_195: - if (host->ios.clock <= 26000000) - pwrclass_val = card->ext_csd.raw_pwr_cl_26_195; - else if (host->ios.clock <= 52000000) + if (host->ios.clock <= MMC_HIGH_26_MAX_DTR) + pwrclass_val = ext_csd->raw_pwr_cl_26_195; + else if (host->ios.clock <= MMC_HIGH_52_MAX_DTR) pwrclass_val = (bus_width <= EXT_CSD_BUS_WIDTH_8) ? - card->ext_csd.raw_pwr_cl_52_195 : - card->ext_csd.raw_pwr_cl_ddr_52_195; - else if (host->ios.clock <= 200000000) - pwrclass_val = card->ext_csd.raw_pwr_cl_200_195; + ext_csd->raw_pwr_cl_52_195 : + ext_csd->raw_pwr_cl_ddr_52_195; + else if (host->ios.clock <= MMC_HS200_MAX_DTR) + pwrclass_val = ext_csd->raw_pwr_cl_200_195; break; case MMC_VDD_27_28: case MMC_VDD_28_29: @@ -754,14 +778,16 @@ static int mmc_select_powerclass(struct mmc_card *card, case MMC_VDD_33_34: case MMC_VDD_34_35: case MMC_VDD_35_36: - if (host->ios.clock <= 26000000) - pwrclass_val = card->ext_csd.raw_pwr_cl_26_360; - else if (host->ios.clock <= 52000000) + if (host->ios.clock <= MMC_HIGH_26_MAX_DTR) + pwrclass_val = ext_csd->raw_pwr_cl_26_360; + else if (host->ios.clock <= MMC_HIGH_52_MAX_DTR) pwrclass_val = (bus_width <= EXT_CSD_BUS_WIDTH_8) ? - card->ext_csd.raw_pwr_cl_52_360 : - card->ext_csd.raw_pwr_cl_ddr_52_360; - else if (host->ios.clock <= 200000000) - pwrclass_val = card->ext_csd.raw_pwr_cl_200_360; + ext_csd->raw_pwr_cl_52_360 : + ext_csd->raw_pwr_cl_ddr_52_360; + else if (host->ios.clock <= MMC_HS200_MAX_DTR) + pwrclass_val = (bus_width == EXT_CSD_DDR_BUS_WIDTH_8) ? + ext_csd->raw_pwr_cl_ddr_200_360 : + ext_csd->raw_pwr_cl_200_360; break; default: pr_warning("%s: Voltage range not supported " @@ -787,40 +813,79 @@ static int mmc_select_powerclass(struct mmc_card *card, return err; } +static int mmc_select_powerclass(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + u32 bus_width, ext_csd_bits; + int err, ddr; + + /* Power class selection is supported for versions >= 4.0 */ + if (card->csd.mmca_vsn < CSD_SPEC_VER_4) + return 0; + + bus_width = host->ios.bus_width; + /* Power class values are defined only for 4/8 bit bus */ + if (bus_width == MMC_BUS_WIDTH_1) + return 0; + + ddr = card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_52; + if (ddr) + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? + EXT_CSD_DDR_BUS_WIDTH_8 : EXT_CSD_DDR_BUS_WIDTH_4; + else + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? + EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4; + + err = __mmc_select_powerclass(card, ext_csd_bits); + if (err) + pr_warn("%s: power class selection to bus width %d ddr %d failed\n", + mmc_hostname(host), 1 << bus_width, ddr); + + return err; +} + /* - * Selects the desired buswidth and switch to the HS200 mode - * if bus width set without error + * Set the bus speed for the selected speed mode. */ -static int mmc_select_hs200(struct mmc_card *card) +static void mmc_set_bus_speed(struct mmc_card *card) +{ + unsigned int max_dtr = (unsigned int)-1; + + if ((mmc_card_hs200(card) || mmc_card_hs400(card)) && + max_dtr > card->ext_csd.hs200_max_dtr) + max_dtr = card->ext_csd.hs200_max_dtr; + else if (mmc_card_hs(card) && max_dtr > card->ext_csd.hs_max_dtr) + max_dtr = card->ext_csd.hs_max_dtr; + else if (max_dtr > card->csd.max_dtr) + max_dtr = card->csd.max_dtr; + + mmc_set_clock(card->host, max_dtr); +} + +/* + * Select the bus width amoung 4-bit and 8-bit(SDR). + * If the bus width is changed successfully, return the selected width value. + * Zero is returned instead of error value if the wide width is not supported. + */ +static int mmc_select_bus_width(struct mmc_card *card) { - int idx, err = -EINVAL; - struct mmc_host *host; static unsigned ext_csd_bits[] = { - EXT_CSD_BUS_WIDTH_4, EXT_CSD_BUS_WIDTH_8, + EXT_CSD_BUS_WIDTH_4, }; static unsigned bus_widths[] = { - MMC_BUS_WIDTH_4, MMC_BUS_WIDTH_8, + MMC_BUS_WIDTH_4, }; + struct mmc_host *host = card->host; + unsigned idx, bus_width = 0; + int err = 0; - BUG_ON(!card); - - host = card->host; - - if (card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V && - host->caps2 & MMC_CAP2_HS200_1_2V_SDR) - err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120); - - if (err && card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_8V && - host->caps2 & MMC_CAP2_HS200_1_8V_SDR) - err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); - - /* If fails try again during next card power cycle */ - if (err) - goto err; + if ((card->csd.mmca_vsn < CSD_SPEC_VER_4) && + !(host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) + return 0; - idx = (host->caps & MMC_CAP_8_BIT_DATA) ? 1 : 0; + idx = (host->caps & MMC_CAP_8_BIT_DATA) ? 0 : 1; /* * Unlike SD, MMC cards dont have a configuration register to notify @@ -828,8 +893,7 @@ static int mmc_select_hs200(struct mmc_card *card) * the supported bus width or compare the ext csd values of current * bus width and ext csd values of 1 bit mode read earlier. */ - for (; idx >= 0; idx--) { - + for (; idx < ARRAY_SIZE(bus_widths); idx++) { /* * Host is capable of 8bit transfer, then switch * the device to work in 8bit transfer mode. If the @@ -844,27 +908,266 @@ static int mmc_select_hs200(struct mmc_card *card) if (err) continue; - mmc_set_bus_width(card->host, bus_widths[idx]); + bus_width = bus_widths[idx]; + mmc_set_bus_width(host, bus_width); + /* + * If controller can't handle bus width test, + * compare ext_csd previously read in 1 bit mode + * against ext_csd at new bus width + */ if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST)) - err = mmc_compare_ext_csds(card, bus_widths[idx]); + err = mmc_compare_ext_csds(card, bus_width); else - err = mmc_bus_test(card, bus_widths[idx]); - if (!err) + err = mmc_bus_test(card, bus_width); + + if (!err) { + err = bus_width; break; + } else { + pr_warn("%s: switch to bus width %d failed\n", + mmc_hostname(host), ext_csd_bits[idx]); + } } - /* switch to HS200 mode if bus width set successfully */ + return err; +} + +/* + * Switch to the high-speed mode + */ +static int mmc_select_hs(struct mmc_card *card) +{ + int err; + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS, + card->ext_csd.generic_cmd6_time, + true, true, true); if (!err) + mmc_set_timing(card->host, MMC_TIMING_MMC_HS); + + return err; +} + +/* + * Activate wide bus and DDR if supported. + */ +static int mmc_select_hs_ddr(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + u32 bus_width, ext_csd_bits; + int err = 0; + + if (!(card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_52)) + return 0; + + bus_width = host->ios.bus_width; + if (bus_width == MMC_BUS_WIDTH_1) + return 0; + + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? + EXT_CSD_DDR_BUS_WIDTH_8 : EXT_CSD_DDR_BUS_WIDTH_4; + + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + ext_csd_bits, + card->ext_csd.generic_cmd6_time); + if (err) { + pr_warn("%s: switch to bus width %d ddr failed\n", + mmc_hostname(host), 1 << bus_width); + return err; + } + + /* + * eMMC cards can support 3.3V to 1.2V i/o (vccq) + * signaling. + * + * EXT_CSD_CARD_TYPE_DDR_1_8V means 3.3V or 1.8V vccq. + * + * 1.8V vccq at 3.3V core voltage (vcc) is not required + * in the JEDEC spec for DDR. + * + * Do not force change in vccq since we are obviously + * working and no change to vccq is needed. + * + * WARNING: eMMC rules are NOT the same as SD DDR + */ + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_2V) { + err = __mmc_set_signal_voltage(host, + MMC_SIGNAL_VOLTAGE_120); + if (err) + return err; + } + + mmc_set_timing(host, MMC_TIMING_MMC_DDR52); + + return err; +} + +static int mmc_select_hs400(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + int err = 0; + + /* + * HS400 mode requires 8-bit bus width + */ + if (!(card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400 && + host->ios.bus_width == MMC_BUS_WIDTH_8)) + return 0; + + /* + * Before switching to dual data rate operation for HS400, + * it is required to convert from HS200 mode to HS mode. + */ + mmc_set_timing(card->host, MMC_TIMING_MMC_HS); + mmc_set_bus_speed(card); + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS, + card->ext_csd.generic_cmd6_time, + true, true, true); + if (err) { + pr_warn("%s: switch to high-speed from hs200 failed, err:%d\n", + mmc_hostname(host), err); + return err; + } + + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_BUS_WIDTH, + EXT_CSD_DDR_BUS_WIDTH_8, + card->ext_csd.generic_cmd6_time); + if (err) { + pr_warn("%s: switch to bus width for hs400 failed, err:%d\n", + mmc_hostname(host), err); + return err; + } + + err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS400, + card->ext_csd.generic_cmd6_time, + true, true, true); + if (err) { + pr_warn("%s: switch to hs400 failed, err:%d\n", + mmc_hostname(host), err); + return err; + } + + mmc_set_timing(host, MMC_TIMING_MMC_HS400); + mmc_set_bus_speed(card); + + return 0; +} + +/* + * For device supporting HS200 mode, the following sequence + * should be done before executing the tuning process. + * 1. set the desired bus width(4-bit or 8-bit, 1-bit is not supported) + * 2. switch to HS200 mode + * 3. set the clock to > 52Mhz and <=200MHz + */ +static int mmc_select_hs200(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + int err = -EINVAL; + + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_2V) + err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120); + + if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_8V) + err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180); + + /* If fails try again during next card power cycle */ + if (err) + goto err; + + /* + * Set the bus width(4 or 8) with host's support and + * switch to HS200 mode if bus width is set successfully. + */ + err = mmc_select_bus_width(card); + if (!IS_ERR_VALUE(err)) { err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_HS_TIMING, 2, - card->ext_csd.generic_cmd6_time, - true, true, true); + EXT_CSD_HS_TIMING, EXT_CSD_TIMING_HS200, + card->ext_csd.generic_cmd6_time, + true, true, true); + if (!err) + mmc_set_timing(host, MMC_TIMING_MMC_HS200); + } err: return err; } /* + * Activate High Speed or HS200 mode if supported. + */ +static int mmc_select_timing(struct mmc_card *card) +{ + int err = 0; + + if ((card->csd.mmca_vsn < CSD_SPEC_VER_4 && + card->ext_csd.hs_max_dtr == 0)) + goto bus_speed; + + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200) + err = mmc_select_hs200(card); + else if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS) + err = mmc_select_hs(card); + + if (err && err != -EBADMSG) + return err; + + if (err) { + pr_warn("%s: switch to %s failed\n", + mmc_card_hs(card) ? "high-speed" : + (mmc_card_hs200(card) ? "hs200" : ""), + mmc_hostname(card->host)); + err = 0; + } + +bus_speed: + /* + * Set the bus speed to the selected bus timing. + * If timing is not selected, backward compatible is the default. + */ + mmc_set_bus_speed(card); + return err; +} + +/* + * Execute tuning sequence to seek the proper bus operating + * conditions for HS200 and HS400, which sends CMD21 to the device. + */ +static int mmc_hs200_tuning(struct mmc_card *card) +{ + struct mmc_host *host = card->host; + int err = 0; + + /* + * Timing should be adjusted to the HS400 target + * operation frequency for tuning process + */ + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400 && + host->ios.bus_width == MMC_BUS_WIDTH_8) + if (host->ops->prepare_hs400_tuning) + host->ops->prepare_hs400_tuning(host, &host->ios); + + if (host->ops->execute_tuning) { + mmc_host_clk_hold(host); + err = host->ops->execute_tuning(host, + MMC_SEND_TUNING_BLOCK_HS200); + mmc_host_clk_release(host); + + if (err) + pr_warn("%s: tuning execution failed\n", + mmc_hostname(host)); + } + + return err; +} + +/* * Handle the detection and initialisation of a card. * * In the case of a resume, "oldcard" will contain the card @@ -874,9 +1177,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, struct mmc_card *oldcard) { struct mmc_card *card; - int err, ddr = 0; + int err; u32 cid[4]; - unsigned int max_dtr; u32 rocr; u8 *ext_csd = NULL; @@ -1068,206 +1370,34 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, } /* - * Activate high speed (if supported) - */ - if (card->ext_csd.hs_max_dtr != 0) { - err = 0; - if (card->ext_csd.hs_max_dtr > 52000000 && - host->caps2 & MMC_CAP2_HS200) - err = mmc_select_hs200(card); - else if (host->caps & MMC_CAP_MMC_HIGHSPEED) - err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_HS_TIMING, 1, - card->ext_csd.generic_cmd6_time, - true, true, true); - - if (err && err != -EBADMSG) - goto free_card; - - if (err) { - pr_warning("%s: switch to highspeed failed\n", - mmc_hostname(card->host)); - err = 0; - } else { - if (card->ext_csd.hs_max_dtr > 52000000 && - host->caps2 & MMC_CAP2_HS200) { - mmc_card_set_hs200(card); - mmc_set_timing(card->host, - MMC_TIMING_MMC_HS200); - } else { - mmc_card_set_highspeed(card); - mmc_set_timing(card->host, MMC_TIMING_MMC_HS); - } - } - } - - /* - * Compute bus speed. - */ - max_dtr = (unsigned int)-1; - - if (mmc_card_highspeed(card) || mmc_card_hs200(card)) { - if (max_dtr > card->ext_csd.hs_max_dtr) - max_dtr = card->ext_csd.hs_max_dtr; - if (mmc_card_highspeed(card) && (max_dtr > 52000000)) - max_dtr = 52000000; - } else if (max_dtr > card->csd.max_dtr) { - max_dtr = card->csd.max_dtr; - } - - mmc_set_clock(host, max_dtr); - - /* - * Indicate DDR mode (if supported). + * Select timing interface */ - if (mmc_card_highspeed(card)) { - if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) - && (host->caps & MMC_CAP_1_8V_DDR)) - ddr = MMC_1_8V_DDR_MODE; - else if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_2V) - && (host->caps & MMC_CAP_1_2V_DDR)) - ddr = MMC_1_2V_DDR_MODE; - } + err = mmc_select_timing(card); + if (err) + goto free_card; - /* - * Indicate HS200 SDR mode (if supported). - */ if (mmc_card_hs200(card)) { - u32 ext_csd_bits; - u32 bus_width = card->host->ios.bus_width; - - /* - * For devices supporting HS200 mode, the bus width has - * to be set before executing the tuning function. If - * set before tuning, then device will respond with CRC - * errors for responses on CMD line. So for HS200 the - * sequence will be - * 1. set bus width 4bit / 8 bit (1 bit not supported) - * 2. switch to HS200 mode - * 3. set the clock to > 52Mhz <=200MHz and - * 4. execute tuning for HS200 - */ - if ((host->caps2 & MMC_CAP2_HS200) && - card->host->ops->execute_tuning) { - mmc_host_clk_hold(card->host); - err = card->host->ops->execute_tuning(card->host, - MMC_SEND_TUNING_BLOCK_HS200); - mmc_host_clk_release(card->host); - } - if (err) { - pr_warning("%s: tuning execution failed\n", - mmc_hostname(card->host)); + err = mmc_hs200_tuning(card); + if (err) goto err; - } - ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ? - EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4; - err = mmc_select_powerclass(card, ext_csd_bits); + err = mmc_select_hs400(card); if (err) - pr_warning("%s: power class selection to bus width %d" - " failed\n", mmc_hostname(card->host), - 1 << bus_width); + goto err; + } else if (mmc_card_hs(card)) { + /* Select the desired bus width optionally */ + err = mmc_select_bus_width(card); + if (!IS_ERR_VALUE(err)) { + err = mmc_select_hs_ddr(card); + if (err) + goto err; + } } /* - * Activate wide bus and DDR (if supported). + * Choose the power class with selected bus interface */ - if (!mmc_card_hs200(card) && - (card->csd.mmca_vsn >= CSD_SPEC_VER_4) && - (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) { - static unsigned ext_csd_bits[][2] = { - { EXT_CSD_BUS_WIDTH_8, EXT_CSD_DDR_BUS_WIDTH_8 }, - { EXT_CSD_BUS_WIDTH_4, EXT_CSD_DDR_BUS_WIDTH_4 }, - { EXT_CSD_BUS_WIDTH_1, EXT_CSD_BUS_WIDTH_1 }, - }; - static unsigned bus_widths[] = { - MMC_BUS_WIDTH_8, - MMC_BUS_WIDTH_4, - MMC_BUS_WIDTH_1 - }; - unsigned idx, bus_width = 0; - - if (host->caps & MMC_CAP_8_BIT_DATA) - idx = 0; - else - idx = 1; - for (; idx < ARRAY_SIZE(bus_widths); idx++) { - bus_width = bus_widths[idx]; - if (bus_width == MMC_BUS_WIDTH_1) - ddr = 0; /* no DDR for 1-bit width */ - err = mmc_select_powerclass(card, ext_csd_bits[idx][0]); - if (err) - pr_warning("%s: power class selection to " - "bus width %d failed\n", - mmc_hostname(card->host), - 1 << bus_width); - - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_BUS_WIDTH, - ext_csd_bits[idx][0], - card->ext_csd.generic_cmd6_time); - if (!err) { - mmc_set_bus_width(card->host, bus_width); - - /* - * If controller can't handle bus width test, - * compare ext_csd previously read in 1 bit mode - * against ext_csd at new bus width - */ - if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST)) - err = mmc_compare_ext_csds(card, - bus_width); - else - err = mmc_bus_test(card, bus_width); - if (!err) - break; - } - } - - if (!err && ddr) { - err = mmc_select_powerclass(card, ext_csd_bits[idx][1]); - if (err) - pr_warning("%s: power class selection to " - "bus width %d ddr %d failed\n", - mmc_hostname(card->host), - 1 << bus_width, ddr); - - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_BUS_WIDTH, - ext_csd_bits[idx][1], - card->ext_csd.generic_cmd6_time); - } - if (err) { - pr_warning("%s: switch to bus width %d ddr %d " - "failed\n", mmc_hostname(card->host), - 1 << bus_width, ddr); - goto free_card; - } else if (ddr) { - /* - * eMMC cards can support 3.3V to 1.2V i/o (vccq) - * signaling. - * - * EXT_CSD_CARD_TYPE_DDR_1_8V means 3.3V or 1.8V vccq. - * - * 1.8V vccq at 3.3V core voltage (vcc) is not required - * in the JEDEC spec for DDR. - * - * Do not force change in vccq since we are obviously - * working and no change to vccq is needed. - * - * WARNING: eMMC rules are NOT the same as SD DDR - */ - if (ddr == MMC_1_2V_DDR_MODE) { - err = __mmc_set_signal_voltage(host, - MMC_SIGNAL_VOLTAGE_120); - if (err) - goto err; - } - mmc_card_set_ddr_mode(card); - mmc_set_timing(card->host, MMC_TIMING_UHS_DDR50); - mmc_set_bus_width(card->host, bus_width); - } - } + mmc_select_powerclass(card); /* * Enable HPI feature (if supported) @@ -1507,7 +1637,6 @@ static int _mmc_suspend(struct mmc_host *host, bool is_suspend) err = mmc_sleep(host); else if (!mmc_host_is_spi(host)) err = mmc_deselect_cards(host); - host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200); if (!err) { mmc_power_off(host); @@ -1637,7 +1766,6 @@ static int mmc_power_restore(struct mmc_host *host) { int ret; - host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200); mmc_claim_host(host); ret = mmc_init_card(host, host->card->ocr, host->card); mmc_release_host(host); |