Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into i2c/for-4.15

This cycle has been real quiet for me. There's only the one trivial
patch that somewhat simplifies DT parsing in the i2c-mux-reg driver.

4 files changed, 37 insertions, 31 deletions

diff --git a/drivers/misc/cxl/cxllib.c b/drivers/misc/cxl/cxllib.c
index 5dba23c..dc9bc18 100644
--- a/drivers/misc/cxl/cxllib.c
+++ b/drivers/misc/cxl/cxllib.c
@@ -219,8 +219,17 @@ int cxllib_handle_fault(struct mm_struct *mm, u64 addr, u64 size, u64 flags)
 
 	down_read(&mm->mmap_sem);
 
-	for (dar = addr; dar < addr + size; dar += page_size) {
-		if (!vma || dar < vma->vm_start || dar > vma->vm_end) {
+	vma = find_vma(mm, addr);
+	if (!vma) {
+		pr_err("Can't find vma for addr %016llx\n", addr);
+		rc = -EFAULT;
+		goto out;
+	}
+	/* get the size of the pages allocated */
+	page_size = vma_kernel_pagesize(vma);
+
+	for (dar = (addr & ~(page_size - 1)); dar < (addr + size); dar += page_size) {
+		if (dar < vma->vm_start || dar >= vma->vm_end) {
 			vma = find_vma(mm, addr);
 			if (!vma) {
 				pr_err("Can't find vma for addr %016llx\n", addr);
diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h
index c8307e8..0ccccba 100644
--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -127,6 +127,8 @@
 #define MEI_DEV_ID_BXT_M      0x1A9A  /* Broxton M */
 #define MEI_DEV_ID_APL_I      0x5A9A  /* Apollo Lake I */
 
+#define MEI_DEV_ID_GLK        0x319A  /* Gemini Lake */
+
 #define MEI_DEV_ID_KBP        0xA2BA  /* Kaby Point */
 #define MEI_DEV_ID_KBP_2      0xA2BB  /* Kaby Point 2 */
 
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index 4ff40d3..78b3172 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -93,6 +93,8 @@ static const struct pci_device_id mei_me_pci_tbl[] = {
 	{MEI_PCI_DEVICE(MEI_DEV_ID_BXT_M, MEI_ME_PCH8_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_APL_I, MEI_ME_PCH8_CFG)},
 
+	{MEI_PCI_DEVICE(MEI_DEV_ID_GLK, MEI_ME_PCH8_CFG)},
+
 	{MEI_PCI_DEVICE(MEI_DEV_ID_KBP, MEI_ME_PCH8_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_KBP_2, MEI_ME_PCH8_CFG)},
 
@@ -226,12 +228,15 @@ static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	pdev->dev_flags |= PCI_DEV_FLAGS_NEEDS_RESUME;
 
 	/*
-	* For not wake-able HW runtime pm framework
-	* can't be used on pci device level.
-	* Use domain runtime pm callbacks instead.
-	*/
-	if (!pci_dev_run_wake(pdev))
-		mei_me_set_pm_domain(dev);
+	 * ME maps runtime suspend/resume to D0i states,
+	 * hence we need to go around native PCI runtime service which
+	 * eventually brings the device into D3cold/hot state,
+	 * but the mei device cannot wake up from D3 unlike from D0i3.
+	 * To get around the PCI device native runtime pm,
+	 * ME uses runtime pm domain handlers which take precedence
+	 * over the driver's pm handlers.
+	 */
+	mei_me_set_pm_domain(dev);
 
 	if (mei_pg_is_enabled(dev))
 		pm_runtime_put_noidle(&pdev->dev);
@@ -271,8 +276,7 @@ static void mei_me_shutdown(struct pci_dev *pdev)
 	dev_dbg(&pdev->dev, "shutdown\n");
 	mei_stop(dev);
 
-	if (!pci_dev_run_wake(pdev))
-		mei_me_unset_pm_domain(dev);
+	mei_me_unset_pm_domain(dev);
 
 	mei_disable_interrupts(dev);
 	free_irq(pdev->irq, dev);
@@ -300,8 +304,7 @@ static void mei_me_remove(struct pci_dev *pdev)
 	dev_dbg(&pdev->dev, "stop\n");
 	mei_stop(dev);
 
-	if (!pci_dev_run_wake(pdev))
-		mei_me_unset_pm_domain(dev);
+	mei_me_unset_pm_domain(dev);
 
 	mei_disable_interrupts(dev);
 
diff --git a/drivers/misc/mei/pci-txe.c b/drivers/misc/mei/pci-txe.c
index e38a5f1..0566f9b 100644
--- a/drivers/misc/mei/pci-txe.c
+++ b/drivers/misc/mei/pci-txe.c
@@ -144,12 +144,14 @@ static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	pdev->dev_flags |= PCI_DEV_FLAGS_NEEDS_RESUME;
 
 	/*
-	* For not wake-able HW runtime pm framework
-	* can't be used on pci device level.
-	* Use domain runtime pm callbacks instead.
-	*/
-	if (!pci_dev_run_wake(pdev))
-		mei_txe_set_pm_domain(dev);
+	 * TXE maps runtime suspend/resume to own power gating states,
+	 * hence we need to go around native PCI runtime service which
+	 * eventually brings the device into D3cold/hot state.
+	 * But the TXE device cannot wake up from D3 unlike from own
+	 * power gating. To get around PCI device native runtime pm,
+	 * TXE uses runtime pm domain handlers which take precedence.
+	 */
+	mei_txe_set_pm_domain(dev);
 
 	pm_runtime_put_noidle(&pdev->dev);
 
@@ -186,8 +188,7 @@ static void mei_txe_shutdown(struct pci_dev *pdev)
 	dev_dbg(&pdev->dev, "shutdown\n");
 	mei_stop(dev);
 
-	if (!pci_dev_run_wake(pdev))
-		mei_txe_unset_pm_domain(dev);
+	mei_txe_unset_pm_domain(dev);
 
 	mei_disable_interrupts(dev);
 	free_irq(pdev->irq, dev);
@@ -215,8 +216,7 @@ static void mei_txe_remove(struct pci_dev *pdev)
 
 	mei_stop(dev);
 
-	if (!pci_dev_run_wake(pdev))
-		mei_txe_unset_pm_domain(dev);
+	mei_txe_unset_pm_domain(dev);
 
 	mei_disable_interrupts(dev);
 	free_irq(pdev->irq, dev);
@@ -318,15 +318,7 @@ static int mei_txe_pm_runtime_suspend(struct device *device)
 	else
 		ret = -EAGAIN;
 
-	/*
-	 * If everything is okay we're about to enter PCI low
-	 * power state (D3) therefor we need to disable the
-	 * interrupts towards host.
-	 * However if device is not wakeable we do not enter
-	 * D-low state and we need to keep the interrupt kicking
-	 */
-	if (!ret && pci_dev_run_wake(pdev))
-		mei_disable_interrupts(dev);
+	/* keep irq on we are staying in D0 */
 
 	dev_dbg(&pdev->dev, "rpm: txe: runtime suspend ret=%d\n", ret);