Merge branch 'for-mfd' of git://git.linaro.org/people/ljones/linux-3.0-ux500 into for-next

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

5 files changed, 1375 insertions, 74 deletions

diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index cdcaa5b..1045142 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -320,6 +320,7 @@ static struct abx500_ops ab8500_ops = {
 	.mask_and_set_register = ab8500_mask_and_set_register,
 	.event_registers_startup_state_get = NULL,
 	.startup_irq_enabled = NULL,
+	.dump_all_banks = ab8500_dump_all_banks,
 };
 
 static void ab8500_irq_lock(struct irq_data *data)
@@ -521,6 +522,7 @@ static irqreturn_t ab8500_irq(int irq, void *dev)
 			int virq = ab8500_irq_get_virq(ab8500, line);
 
 			handle_nested_irq(virq);
+			ab8500_debug_register_interrupt(line);
 			value &= ~(1 << bit);
 
 		} while (value);
diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index 5a8e707..ba25f95 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -4,6 +4,72 @@
  * Author: Mattias Wallin <mattias.wallin@stericsson.com> for ST-Ericsson.
  * License Terms: GNU General Public License v2
  */
+/*
+ * AB8500 register access
+ * ======================
+ *
+ * read:
+ * # echo BANK  >  <debugfs>/ab8500/register-bank
+ * # echo ADDR  >  <debugfs>/ab8500/register-address
+ * # cat <debugfs>/ab8500/register-value
+ *
+ * write:
+ * # echo BANK  >  <debugfs>/ab8500/register-bank
+ * # echo ADDR  >  <debugfs>/ab8500/register-address
+ * # echo VALUE >  <debugfs>/ab8500/register-value
+ *
+ * read all registers from a bank:
+ * # echo BANK  >  <debugfs>/ab8500/register-bank
+ * # cat <debugfs>/ab8500/all-bank-register
+ *
+ * BANK   target AB8500 register bank
+ * ADDR   target AB8500 register address
+ * VALUE  decimal or 0x-prefixed hexadecimal
+ *
+ *
+ * User Space notification on AB8500 IRQ
+ * =====================================
+ *
+ * Allows user space entity to be notified when target AB8500 IRQ occurs.
+ * When subscribed, a sysfs entry is created in ab8500.i2c platform device.
+ * One can pool this file to get target IRQ occurence information.
+ *
+ * subscribe to an AB8500 IRQ:
+ * # echo IRQ  >  <debugfs>/ab8500/irq-subscribe
+ *
+ * unsubscribe from an AB8500 IRQ:
+ * # echo IRQ  >  <debugfs>/ab8500/irq-unsubscribe
+ *
+ *
+ * AB8500 register formated read/write access
+ * ==========================================
+ *
+ * Read:  read data, data>>SHIFT, data&=MASK, output data
+ *        [0xABCDEF98] shift=12 mask=0xFFF => 0x00000CDE
+ * Write: read data, data &= ~(MASK<<SHIFT), data |= (VALUE<<SHIFT), write data
+ *        [0xABCDEF98] shift=12 mask=0xFFF value=0x123 => [0xAB123F98]
+ *
+ * Usage:
+ * # echo "CMD [OPTIONS] BANK ADRESS [VALUE]" > $debugfs/ab8500/hwreg
+ *
+ * CMD      read      read access
+ *          write     write access
+ *
+ * BANK     target reg bank
+ * ADDRESS  target reg address
+ * VALUE    (write) value to be updated
+ *
+ * OPTIONS
+ *  -d|-dec            (read) output in decimal
+ *  -h|-hexa           (read) output in 0x-hexa (default)
+ *  -l|-w|-b           32bit (default), 16bit or 8bit reg access
+ *  -m|-mask MASK      0x-hexa mask (default 0xFFFFFFFF)
+ *  -s|-shift SHIFT    bit shift value (read:left, write:right)
+ *  -o|-offset OFFSET  address offset to add to ADDRESS value
+ *
+ * Warning: bit shift operation is applied to bit-mask.
+ * Warning: bit shift direction depends on read or right command.
+ */
 
 #include <linux/seq_file.h>
 #include <linux/uaccess.h>
@@ -11,13 +77,29 @@
 #include <linux/module.h>
 #include <linux/debugfs.h>
 #include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/kobject.h>
+#include <linux/slab.h>
 
 #include <linux/mfd/abx500.h>
-#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ab8500-gpadc.h>
+
+#ifdef CONFIG_DEBUG_FS
+#include <linux/string.h>
+#include <linux/ctype.h>
+#endif
 
 static u32 debug_bank;
 static u32 debug_address;
 
+static int irq_first;
+static int irq_last;
+static u32 *irq_count;
+static int num_irqs;
+
+static struct device_attribute **dev_attr;
+static char **event_name;
+
 /**
  * struct ab8500_reg_range
  * @first: the first address of the range
@@ -42,15 +124,35 @@ struct ab8500_prcmu_ranges {
 	const struct ab8500_reg_range *range;
 };
 
+/* hwreg- "mask" and "shift" entries ressources */
+struct hwreg_cfg {
+	u32  bank;      /* target bank */
+	u32  addr;      /* target address */
+	uint fmt;       /* format */
+	uint mask;      /* read/write mask, applied before any bit shift */
+	int  shift;     /* bit shift (read:right shift, write:left shift */
+};
+/* fmt bit #0: 0=hexa, 1=dec */
+#define REG_FMT_DEC(c) ((c)->fmt & 0x1)
+#define REG_FMT_HEX(c) (!REG_FMT_DEC(c))
+
+static struct hwreg_cfg hwreg_cfg = {
+	.addr = 0,			/* default: invalid phys addr */
+	.fmt = 0,			/* default: 32bit access, hex output */
+	.mask = 0xFFFFFFFF,	/* default: no mask */
+	.shift = 0,			/* default: no bit shift */
+};
+
 #define AB8500_NAME_STRING "ab8500"
-#define AB8500_NUM_BANKS 22
+#define AB8500_ADC_NAME_STRING "gpadc"
+#define AB8500_NUM_BANKS 24
 
 #define AB8500_REV_REG 0x80
 
 static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = {
 	[0x0] = {
 		.num_ranges = 0,
-		.range = 0,
+		.range = NULL,
 	},
 	[AB8500_SYS_CTRL1_BLOCK] = {
 		.num_ranges = 3,
@@ -215,7 +317,7 @@ static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = {
 		},
 	},
 	[AB8500_CHARGER] = {
-		.num_ranges = 8,
+		.num_ranges = 9,
 		.range = (struct ab8500_reg_range[]) {
 			{
 				.first = 0x00,
@@ -249,6 +351,10 @@ static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = {
 				.first = 0xC0,
 				.last = 0xC2,
 			},
+			{
+				.first = 0xf5,
+				.last =	0xf6,
+			},
 		},
 	},
 	[AB8500_GAS_GAUGE] = {
@@ -268,6 +374,24 @@ static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = {
 			},
 		},
 	},
+	[AB8500_DEVELOPMENT] = {
+		.num_ranges = 1,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x00,
+			},
+		},
+	},
+	[AB8500_DEBUG] = {
+		.num_ranges = 1,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x05,
+				.last = 0x07,
+			},
+		},
+	},
 	[AB8500_AUDIO] = {
 		.num_ranges = 1,
 		.range = (struct ab8500_reg_range[]) {
@@ -354,15 +478,30 @@ static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = {
 	},
 };
 
-static int ab8500_registers_print(struct seq_file *s, void *p)
+static irqreturn_t ab8500_debug_handler(int irq, void *data)
 {
-	struct device *dev = s->private;
-	unsigned int i;
-	u32 bank = debug_bank;
+	char buf[16];
+	struct kobject *kobj = (struct kobject *)data;
+	unsigned int irq_abb = irq - irq_first;
 
-	seq_printf(s, AB8500_NAME_STRING " register values:\n");
+	if (irq_abb < num_irqs)
+		irq_count[irq_abb]++;
+	/*
+	 * This makes it possible to use poll for events (POLLPRI | POLLERR)
+	 * from userspace on sysfs file named <irq-nr>
+	 */
+	sprintf(buf, "%d", irq);
+	sysfs_notify(kobj, NULL, buf);
+
+	return IRQ_HANDLED;
+}
+
+/* Prints to seq_file or log_buf */
+static int ab8500_registers_print(struct device *dev, u32 bank,
+				struct seq_file *s)
+{
+	unsigned int i;
 
-	seq_printf(s, " bank %u:\n", bank);
 	for (i = 0; i < debug_ranges[bank].num_ranges; i++) {
 		u32 reg;
 
@@ -379,22 +518,42 @@ static int ab8500_registers_print(struct seq_file *s, void *p)
 				return err;
 			}
 
-			err = seq_printf(s, "  [%u/0x%02X]: 0x%02X\n", bank,
-				reg, value);
-			if (err < 0) {
-				dev_err(dev, "seq_printf overflow\n");
-				/* Error is not returned here since
-				 * the output is wanted in any case */
-				return 0;
+			if (s) {
+				err = seq_printf(s, "  [%u/0x%02X]: 0x%02X\n",
+					bank, reg, value);
+				if (err < 0) {
+					dev_err(dev,
+					"seq_printf overflow bank=%d reg=%d\n",
+						bank, reg);
+					/* Error is not returned here since
+					 * the output is wanted in any case */
+					return 0;
+				}
+			} else {
+				printk(KERN_INFO" [%u/0x%02X]: 0x%02X\n", bank,
+					reg, value);
 			}
 		}
 	}
 	return 0;
 }
 
+static int ab8500_print_bank_registers(struct seq_file *s, void *p)
+{
+	struct device *dev = s->private;
+	u32 bank = debug_bank;
+
+	seq_printf(s, AB8500_NAME_STRING " register values:\n");
+
+	seq_printf(s, " bank %u:\n", bank);
+
+	ab8500_registers_print(dev, bank, s);
+	return 0;
+}
+
 static int ab8500_registers_open(struct inode *inode, struct file *file)
 {
-	return single_open(file, ab8500_registers_print, inode->i_private);
+	return single_open(file, ab8500_print_bank_registers, inode->i_private);
 }
 
 static const struct file_operations ab8500_registers_fops = {
@@ -405,6 +564,64 @@ static const struct file_operations ab8500_registers_fops = {
 	.owner = THIS_MODULE,
 };
 
+static int ab8500_print_all_banks(struct seq_file *s, void *p)
+{
+	struct device *dev = s->private;
+	unsigned int i;
+	int err;
+
+	seq_printf(s, AB8500_NAME_STRING " register values:\n");
+
+	for (i = 1; i < AB8500_NUM_BANKS; i++) {
+		err = seq_printf(s, " bank %u:\n", i);
+		if (err < 0)
+			dev_err(dev, "seq_printf overflow, bank=%d\n", i);
+
+		ab8500_registers_print(dev, i, s);
+	}
+	return 0;
+}
+
+/* Dump registers to kernel log */
+void ab8500_dump_all_banks(struct device *dev)
+{
+	unsigned int i;
+
+	printk(KERN_INFO"ab8500 register values:\n");
+
+	for (i = 1; i < AB8500_NUM_BANKS; i++) {
+		printk(KERN_INFO" bank %u:\n", i);
+		ab8500_registers_print(dev, i, NULL);
+	}
+}
+
+static int ab8500_all_banks_open(struct inode *inode, struct file *file)
+{
+	struct seq_file *s;
+	int err;
+
+	err = single_open(file, ab8500_print_all_banks, inode->i_private);
+	if (!err) {
+		/* Default buf size in seq_read is not enough */
+		s = (struct seq_file *)file->private_data;
+		s->size = (PAGE_SIZE * 2);
+		s->buf = kmalloc(s->size, GFP_KERNEL);
+		if (!s->buf) {
+			single_release(inode, file);
+			err = -ENOMEM;
+		}
+	}
+	return err;
+}
+
+static const struct file_operations ab8500_all_banks_fops = {
+	.open = ab8500_all_banks_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
 static int ab8500_bank_print(struct seq_file *s, void *p)
 {
 	return seq_printf(s, "%d\n", debug_bank);
@@ -519,6 +736,761 @@ static ssize_t ab8500_val_write(struct file *file,
 	return count;
 }
 
+/*
+ * Interrupt status
+ */
+static u32 num_interrupts[AB8500_MAX_NR_IRQS];
+static int num_interrupt_lines;
+
+void ab8500_debug_register_interrupt(int line)
+{
+	if (line < num_interrupt_lines)
+		num_interrupts[line]++;
+}
+
+static int ab8500_interrupts_print(struct seq_file *s, void *p)
+{
+	int line;
+
+	seq_printf(s, "irq:  number of\n");
+
+	for (line = 0; line < num_interrupt_lines; line++)
+		seq_printf(s, "%3i:  %6i\n", line, num_interrupts[line]);
+
+	return 0;
+}
+
+static int ab8500_interrupts_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab8500_interrupts_print, inode->i_private);
+}
+
+/*
+ * - HWREG DB8500 formated routines
+ */
+static int ab8500_hwreg_print(struct seq_file *s, void *d)
+{
+	struct device *dev = s->private;
+	int ret;
+	u8 regvalue;
+
+	ret = abx500_get_register_interruptible(dev,
+		(u8)hwreg_cfg.bank, (u8)hwreg_cfg.addr, &regvalue);
+	if (ret < 0) {
+		dev_err(dev, "abx500_get_reg fail %d, %d\n",
+			ret, __LINE__);
+		return -EINVAL;
+	}
+
+	if (hwreg_cfg.shift >= 0)
+		regvalue >>= hwreg_cfg.shift;
+	else
+		regvalue <<= -hwreg_cfg.shift;
+	regvalue &= hwreg_cfg.mask;
+
+	if (REG_FMT_DEC(&hwreg_cfg))
+		seq_printf(s, "%d\n", regvalue);
+	else
+		seq_printf(s, "0x%02X\n", regvalue);
+	return 0;
+}
+
+static int ab8500_hwreg_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab8500_hwreg_print, inode->i_private);
+}
+
+static int ab8500_gpadc_bat_ctrl_print(struct seq_file *s, void *p)
+{
+	int bat_ctrl_raw;
+	int bat_ctrl_convert;
+	struct ab8500_gpadc *gpadc;
+
+	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	bat_ctrl_raw = ab8500_gpadc_read_raw(gpadc, BAT_CTRL);
+	bat_ctrl_convert = ab8500_gpadc_ad_to_voltage(gpadc,
+			BAT_CTRL, bat_ctrl_raw);
+
+	return seq_printf(s, "%d,0x%X\n",
+			bat_ctrl_convert, bat_ctrl_raw);
+}
+
+static int ab8500_gpadc_bat_ctrl_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab8500_gpadc_bat_ctrl_print, inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_bat_ctrl_fops = {
+	.open = ab8500_gpadc_bat_ctrl_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_btemp_ball_print(struct seq_file *s, void *p)
+{
+	int btemp_ball_raw;
+	int btemp_ball_convert;
+	struct ab8500_gpadc *gpadc;
+
+	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	btemp_ball_raw = ab8500_gpadc_read_raw(gpadc, BTEMP_BALL);
+	btemp_ball_convert = ab8500_gpadc_ad_to_voltage(gpadc, BTEMP_BALL,
+			btemp_ball_raw);
+
+	return seq_printf(s,
+			"%d,0x%X\n", btemp_ball_convert, btemp_ball_raw);
+}
+
+static int ab8500_gpadc_btemp_ball_open(struct inode *inode,
+		struct file *file)
+{
+	return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_btemp_ball_fops = {
+	.open = ab8500_gpadc_btemp_ball_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_main_charger_v_print(struct seq_file *s, void *p)
+{
+	int main_charger_v_raw;
+	int main_charger_v_convert;
+	struct ab8500_gpadc *gpadc;
+
+	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	main_charger_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_V);
+	main_charger_v_convert = ab8500_gpadc_ad_to_voltage(gpadc,
+			MAIN_CHARGER_V, main_charger_v_raw);
+
+	return seq_printf(s, "%d,0x%X\n",
+			main_charger_v_convert, main_charger_v_raw);
+}
+
+static int ab8500_gpadc_main_charger_v_open(struct inode *inode,
+		struct file *file)
+{
+	return single_open(file, ab8500_gpadc_main_charger_v_print,
+			inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_main_charger_v_fops = {
+	.open = ab8500_gpadc_main_charger_v_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_acc_detect1_print(struct seq_file *s, void *p)
+{
+	int acc_detect1_raw;
+	int acc_detect1_convert;
+	struct ab8500_gpadc *gpadc;
+
+	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	acc_detect1_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT1);
+	acc_detect1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ACC_DETECT1,
+			acc_detect1_raw);
+
+	return seq_printf(s, "%d,0x%X\n",
+			acc_detect1_convert, acc_detect1_raw);
+}
+
+static int ab8500_gpadc_acc_detect1_open(struct inode *inode,
+		struct file *file)
+{
+	return single_open(file, ab8500_gpadc_acc_detect1_print,
+			inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_acc_detect1_fops = {
+	.open = ab8500_gpadc_acc_detect1_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_acc_detect2_print(struct seq_file *s, void *p)
+{
+	int acc_detect2_raw;
+	int acc_detect2_convert;
+	struct ab8500_gpadc *gpadc;
+
+	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	acc_detect2_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT2);
+	acc_detect2_convert = ab8500_gpadc_ad_to_voltage(gpadc,
+	    ACC_DETECT2, acc_detect2_raw);
+
+	return seq_printf(s, "%d,0x%X\n",
+			acc_detect2_convert, acc_detect2_raw);
+}
+
+static int ab8500_gpadc_acc_detect2_open(struct inode *inode,
+		struct file *file)
+{
+	return single_open(file, ab8500_gpadc_acc_detect2_print,
+	    inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_acc_detect2_fops = {
+	.open = ab8500_gpadc_acc_detect2_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_aux1_print(struct seq_file *s, void *p)
+{
+	int aux1_raw;
+	int aux1_convert;
+	struct ab8500_gpadc *gpadc;
+
+	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	aux1_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX1);
+	aux1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX1,
+			aux1_raw);
+
+	return seq_printf(s, "%d,0x%X\n",
+			aux1_convert, aux1_raw);
+}
+
+static int ab8500_gpadc_aux1_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab8500_gpadc_aux1_print, inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_aux1_fops = {
+	.open = ab8500_gpadc_aux1_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_aux2_print(struct seq_file *s, void *p)
+{
+	int aux2_raw;
+	int aux2_convert;
+	struct ab8500_gpadc *gpadc;
+
+	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	aux2_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX2);
+	aux2_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX2,
+			aux2_raw);
+
+	return seq_printf(s, "%d,0x%X\n",
+			aux2_convert, aux2_raw);
+}
+
+static int ab8500_gpadc_aux2_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab8500_gpadc_aux2_print, inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_aux2_fops = {
+	.open = ab8500_gpadc_aux2_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_main_bat_v_print(struct seq_file *s, void *p)
+{
+	int main_bat_v_raw;
+	int main_bat_v_convert;
+	struct ab8500_gpadc *gpadc;
+
+	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	main_bat_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_BAT_V);
+	main_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, MAIN_BAT_V,
+			main_bat_v_raw);
+
+	return seq_printf(s, "%d,0x%X\n",
+			main_bat_v_convert, main_bat_v_raw);
+}
+
+static int ab8500_gpadc_main_bat_v_open(struct inode *inode,
+		struct file *file)
+{
+	return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_main_bat_v_fops = {
+	.open = ab8500_gpadc_main_bat_v_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_vbus_v_print(struct seq_file *s, void *p)
+{
+	int vbus_v_raw;
+	int vbus_v_convert;
+	struct ab8500_gpadc *gpadc;
+
+	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	vbus_v_raw = ab8500_gpadc_read_raw(gpadc, VBUS_V);
+	vbus_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBUS_V,
+			vbus_v_raw);
+
+	return seq_printf(s, "%d,0x%X\n",
+			vbus_v_convert, vbus_v_raw);
+}
+
+static int ab8500_gpadc_vbus_v_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab8500_gpadc_vbus_v_print, inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_vbus_v_fops = {
+	.open = ab8500_gpadc_vbus_v_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_main_charger_c_print(struct seq_file *s, void *p)
+{
+	int main_charger_c_raw;
+	int main_charger_c_convert;
+	struct ab8500_gpadc *gpadc;
+
+	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	main_charger_c_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_C);
+	main_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc,
+			MAIN_CHARGER_C, main_charger_c_raw);
+
+	return seq_printf(s, "%d,0x%X\n",
+			main_charger_c_convert, main_charger_c_raw);
+}
+
+static int ab8500_gpadc_main_charger_c_open(struct inode *inode,
+		struct file *file)
+{
+	return single_open(file, ab8500_gpadc_main_charger_c_print,
+			inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_main_charger_c_fops = {
+	.open = ab8500_gpadc_main_charger_c_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_usb_charger_c_print(struct seq_file *s, void *p)
+{
+	int usb_charger_c_raw;
+	int usb_charger_c_convert;
+	struct ab8500_gpadc *gpadc;
+
+	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	usb_charger_c_raw = ab8500_gpadc_read_raw(gpadc, USB_CHARGER_C);
+	usb_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc,
+	    USB_CHARGER_C, usb_charger_c_raw);
+
+	return seq_printf(s, "%d,0x%X\n",
+			usb_charger_c_convert, usb_charger_c_raw);
+}
+
+static int ab8500_gpadc_usb_charger_c_open(struct inode *inode,
+		struct file *file)
+{
+	return single_open(file, ab8500_gpadc_usb_charger_c_print,
+	    inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_usb_charger_c_fops = {
+	.open = ab8500_gpadc_usb_charger_c_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_bk_bat_v_print(struct seq_file *s, void *p)
+{
+	int bk_bat_v_raw;
+	int bk_bat_v_convert;
+	struct ab8500_gpadc *gpadc;
+
+	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	bk_bat_v_raw = ab8500_gpadc_read_raw(gpadc, BK_BAT_V);
+	bk_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc,
+			BK_BAT_V, bk_bat_v_raw);
+
+	return seq_printf(s, "%d,0x%X\n",
+			bk_bat_v_convert, bk_bat_v_raw);
+}
+
+static int ab8500_gpadc_bk_bat_v_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab8500_gpadc_bk_bat_v_print, inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_bk_bat_v_fops = {
+	.open = ab8500_gpadc_bk_bat_v_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_die_temp_print(struct seq_file *s, void *p)
+{
+	int die_temp_raw;
+	int die_temp_convert;
+	struct ab8500_gpadc *gpadc;
+
+	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	die_temp_raw = ab8500_gpadc_read_raw(gpadc, DIE_TEMP);
+	die_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, DIE_TEMP,
+			die_temp_raw);
+
+	return seq_printf(s, "%d,0x%X\n",
+			die_temp_convert, die_temp_raw);
+}
+
+static int ab8500_gpadc_die_temp_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab8500_gpadc_die_temp_print, inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_die_temp_fops = {
+	.open = ab8500_gpadc_die_temp_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+/*
+ * return length of an ASCII numerical value, 0 is string is not a
+ * numerical value.
+ * string shall start at value 1st char.
+ * string can be tailed with \0 or space or newline chars only.
+ * value can be decimal or hexadecimal (prefixed 0x or 0X).
+ */
+static int strval_len(char *b)
+{
+	char *s = b;
+	if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) {
+		s += 2;
+		for (; *s && (*s != ' ') && (*s != '\n'); s++) {
+			if (!isxdigit(*s))
+				return 0;
+		}
+	} else {
+		if (*s == '-')
+			s++;
+		for (; *s && (*s != ' ') && (*s != '\n'); s++) {
+			if (!isdigit(*s))
+				return 0;
+		}
+	}
+	return (int) (s-b);
+}
+
+/*
+ * parse hwreg input data.
+ * update global hwreg_cfg only if input data syntax is ok.
+ */
+static ssize_t hwreg_common_write(char *b, struct hwreg_cfg *cfg,
+		struct device *dev)
+{
+	uint write, val = 0;
+	u8  regvalue;
+	int ret;
+	struct hwreg_cfg loc = {
+		.bank = 0,          /* default: invalid phys addr */
+		.addr = 0,          /* default: invalid phys addr */
+		.fmt = 0,           /* default: 32bit access, hex output */
+		.mask = 0xFFFFFFFF, /* default: no mask */
+		.shift = 0,         /* default: no bit shift */
+	};
+
+	/* read or write ? */
+	if (!strncmp(b, "read ", 5)) {
+		write = 0;
+		b += 5;
+	} else if (!strncmp(b, "write ", 6)) {
+		write = 1;
+		b += 6;
+	} else
+		return -EINVAL;
+
+	/* OPTIONS -l|-w|-b -s -m -o */
+	while ((*b == ' ') || (*b == '-')) {
+		if (*(b-1) != ' ') {
+			b++;
+			continue;
+		}
+		if ((!strncmp(b, "-d ", 3)) ||
+				(!strncmp(b, "-dec ", 5))) {
+			b += (*(b+2) == ' ') ? 3 : 5;
+			loc.fmt |= (1<<0);
+		} else if ((!strncmp(b, "-h ", 3)) ||
+				(!strncmp(b, "-hex ", 5))) {
+			b += (*(b+2) == ' ') ? 3 : 5;
+			loc.fmt &= ~(1<<0);
+		} else if ((!strncmp(b, "-m ", 3)) ||
+				(!strncmp(b, "-mask ", 6))) {
+			b += (*(b+2) == ' ') ? 3 : 6;
+			if (strval_len(b) == 0)
+				return -EINVAL;
+			loc.mask = simple_strtoul(b, &b, 0);
+		} else if ((!strncmp(b, "-s ", 3)) ||
+				(!strncmp(b, "-shift ", 7))) {
+			b += (*(b+2) == ' ') ? 3 : 7;
+			if (strval_len(b) == 0)
+				return -EINVAL;
+			loc.shift = simple_strtol(b, &b, 0);
+		} else {
+			return -EINVAL;
+		}
+	}
+	/* get arg BANK and ADDRESS */
+	if (strval_len(b) == 0)
+		return -EINVAL;
+	loc.bank = simple_strtoul(b, &b, 0);
+	while (*b == ' ')
+		b++;
+	if (strval_len(b) == 0)
+		return -EINVAL;
+	loc.addr = simple_strtoul(b, &b, 0);
+
+	if (write) {
+		while (*b == ' ')
+			b++;
+		if (strval_len(b) == 0)
+			return -EINVAL;
+		val = simple_strtoul(b, &b, 0);
+	}
+
+	/* args are ok, update target cfg (mainly for read) */
+	*cfg = loc;
+
+#ifdef ABB_HWREG_DEBUG
+	pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d"
+			"value=0x%X\n", (write) ? "write" : "read",
+			REG_FMT_DEC(cfg) ? "decimal" : "hexa",
+			cfg->addr, cfg->mask, cfg->shift, val);
+#endif
+
+	if (!write)
+		return 0;
+
+	ret = abx500_get_register_interruptible(dev,
+			(u8)cfg->bank, (u8)cfg->addr, &regvalue);
+	if (ret < 0) {
+		dev_err(dev, "abx500_get_reg fail %d, %d\n",
+			ret, __LINE__);
+		return -EINVAL;
+	}
+
+	if (cfg->shift >= 0) {
+		regvalue &= ~(cfg->mask << (cfg->shift));
+		val = (val & cfg->mask) << (cfg->shift);
+	} else {
+		regvalue &= ~(cfg->mask >> (-cfg->shift));
+		val = (val & cfg->mask) >> (-cfg->shift);
+	}
+	val = val | regvalue;
+
+	ret = abx500_set_register_interruptible(dev,
+			(u8)cfg->bank, (u8)cfg->addr, (u8)val);
+	if (ret < 0) {
+		pr_err("abx500_set_reg failed %d, %d", ret, __LINE__);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static ssize_t ab8500_hwreg_write(struct file *file,
+	const char __user *user_buf, size_t count, loff_t *ppos)
+{
+	struct device *dev = ((struct seq_file *)(file->private_data))->private;
+	char buf[128];
+	int buf_size, ret;
+
+	/* Get userspace string and assure termination */
+	buf_size = min(count, (sizeof(buf)-1));
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	buf[buf_size] = 0;
+
+	/* get args and process */
+	ret = hwreg_common_write(buf, &hwreg_cfg, dev);
+	return (ret) ? ret : buf_size;
+}
+
+/*
+ * - irq subscribe/unsubscribe stuff
+ */
+static int ab8500_subscribe_unsubscribe_print(struct seq_file *s, void *p)
+{
+	seq_printf(s, "%d\n", irq_first);
+
+	return 0;
+}
+
+static int ab8500_subscribe_unsubscribe_open(struct inode *inode,
+					     struct file *file)
+{
+	return single_open(file, ab8500_subscribe_unsubscribe_print,
+			   inode->i_private);
+}
+
+/*
+ * Userspace should use poll() on this file. When an event occur
+ * the blocking poll will be released.
+ */
+static ssize_t show_irq(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	unsigned long name;
+	unsigned int irq_index;
+	int err;
+
+	err = strict_strtoul(attr->attr.name, 0, &name);
+	if (err)
+		return err;
+
+	irq_index = name - irq_first;
+	if (irq_index >= num_irqs)
+		return -EINVAL;
+	else
+		return sprintf(buf, "%u\n", irq_count[irq_index]);
+}
+
+static ssize_t ab8500_subscribe_write(struct file *file,
+				      const char __user *user_buf,
+				      size_t count, loff_t *ppos)
+{
+	struct device *dev = ((struct seq_file *)(file->private_data))->private;
+	char buf[32];
+	int buf_size;
+	unsigned long user_val;
+	int err;
+	unsigned int irq_index;
+
+	/* Get userspace string and assure termination */
+	buf_size = min(count, (sizeof(buf)-1));
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	buf[buf_size] = 0;
+
+	err = strict_strtoul(buf, 0, &user_val);
+	if (err)
+		return -EINVAL;
+	if (user_val < irq_first) {
+		dev_err(dev, "debugfs error input < %d\n", irq_first);
+		return -EINVAL;
+	}
+	if (user_val > irq_last) {
+		dev_err(dev, "debugfs error input > %d\n", irq_last);
+		return -EINVAL;
+	}
+
+	irq_index = user_val - irq_first;
+	if (irq_index >= num_irqs)
+		return -EINVAL;
+
+	/*
+	 * This will create a sysfs file named <irq-nr> which userspace can
+	 * use to select or poll and get the AB8500 events
+	 */
+	dev_attr[irq_index] = kmalloc(sizeof(struct device_attribute),
+		GFP_KERNEL);
+	event_name[irq_index] = kmalloc(buf_size, GFP_KERNEL);
+	sprintf(event_name[irq_index], "%lu", user_val);
+	dev_attr[irq_index]->show = show_irq;
+	dev_attr[irq_index]->store = NULL;
+	dev_attr[irq_index]->attr.name = event_name[irq_index];
+	dev_attr[irq_index]->attr.mode = S_IRUGO;
+	err = sysfs_create_file(&dev->kobj, &dev_attr[irq_index]->attr);
+	if (err < 0) {
+		printk(KERN_ERR "sysfs_create_file failed %d\n", err);
+		return err;
+	}
+
+	err = request_threaded_irq(user_val, NULL, ab8500_debug_handler,
+				   IRQF_SHARED | IRQF_NO_SUSPEND,
+				   "ab8500-debug", &dev->kobj);
+	if (err < 0) {
+		printk(KERN_ERR "request_threaded_irq failed %d, %lu\n",
+                       err, user_val);
+		sysfs_remove_file(&dev->kobj, &dev_attr[irq_index]->attr);
+		return err;
+	}
+
+	return buf_size;
+}
+
+static ssize_t ab8500_unsubscribe_write(struct file *file,
+					const char __user *user_buf,
+					size_t count, loff_t *ppos)
+{
+	struct device *dev = ((struct seq_file *)(file->private_data))->private;
+	char buf[32];
+	int buf_size;
+	unsigned long user_val;
+	int err;
+	unsigned int irq_index;
+
+	/* Get userspace string and assure termination */
+	buf_size = min(count, (sizeof(buf)-1));
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	buf[buf_size] = 0;
+
+	err = strict_strtoul(buf, 0, &user_val);
+	if (err)
+		return -EINVAL;
+	if (user_val < irq_first) {
+		dev_err(dev, "debugfs error input < %d\n", irq_first);
+		return -EINVAL;
+	}
+	if (user_val > irq_last) {
+		dev_err(dev, "debugfs error input > %d\n", irq_last);
+		return -EINVAL;
+	}
+
+	irq_index = user_val - irq_first;
+	if (irq_index >= num_irqs)
+		return -EINVAL;
+
+	/* Set irq count to 0 when unsubscribe */
+	irq_count[irq_index] = 0;
+
+	if (dev_attr[irq_index])
+		sysfs_remove_file(&dev->kobj, &dev_attr[irq_index]->attr);
+
+
+	free_irq(user_val, &dev->kobj);
+	kfree(event_name[irq_index]);
+	kfree(dev_attr[irq_index]);
+
+	return buf_size;
+}
+
+/*
+ * - several deubgfs nodes fops
+ */
+
 static const struct file_operations ab8500_bank_fops = {
 	.open = ab8500_bank_open,
 	.write = ab8500_bank_write,
@@ -546,64 +1518,231 @@ static const struct file_operations ab8500_val_fops = {
 	.owner = THIS_MODULE,
 };
 
+static const struct file_operations ab8500_interrupts_fops = {
+	.open = ab8500_interrupts_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static const struct file_operations ab8500_subscribe_fops = {
+	.open = ab8500_subscribe_unsubscribe_open,
+	.write = ab8500_subscribe_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static const struct file_operations ab8500_unsubscribe_fops = {
+	.open = ab8500_subscribe_unsubscribe_open,
+	.write = ab8500_unsubscribe_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static const struct file_operations ab8500_hwreg_fops = {
+	.open = ab8500_hwreg_open,
+	.write = ab8500_hwreg_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
 static struct dentry *ab8500_dir;
-static struct dentry *ab8500_reg_file;
-static struct dentry *ab8500_bank_file;
-static struct dentry *ab8500_address_file;
-static struct dentry *ab8500_val_file;
+static struct dentry *ab8500_gpadc_dir;
 
 static int ab8500_debug_probe(struct platform_device *plf)
 {
+	struct dentry *file;
+	int ret = -ENOMEM;
+	struct ab8500 *ab8500;
 	debug_bank = AB8500_MISC;
 	debug_address = AB8500_REV_REG & 0x00FF;
 
+	ab8500 = dev_get_drvdata(plf->dev.parent);
+	num_irqs = ab8500->mask_size;
+
+	irq_count = kzalloc(sizeof(*irq_count)*num_irqs, GFP_KERNEL);
+	if (!irq_count)
+		return -ENOMEM;
+
+	dev_attr = kzalloc(sizeof(*dev_attr)*num_irqs,GFP_KERNEL);
+	if (!dev_attr)
+		goto out_freeirq_count;
+
+	event_name = kzalloc(sizeof(*event_name)*num_irqs, GFP_KERNEL);
+	if (!event_name)
+		goto out_freedev_attr;
+
+	irq_first = platform_get_irq_byname(plf, "IRQ_FIRST");
+	if (irq_first < 0) {
+		dev_err(&plf->dev, "First irq not found, err %d\n",
+				irq_first);
+		ret = irq_first;
+		goto out_freeevent_name;
+	}
+
+	irq_last = platform_get_irq_byname(plf, "IRQ_LAST");
+	if (irq_last < 0) {
+		dev_err(&plf->dev, "Last irq not found, err %d\n",
+				irq_last);
+		ret = irq_last;
+                goto out_freeevent_name;
+	}
+
 	ab8500_dir = debugfs_create_dir(AB8500_NAME_STRING, NULL);
 	if (!ab8500_dir)
-		goto exit_no_debugfs;
+		goto err;
+
+	ab8500_gpadc_dir = debugfs_create_dir(AB8500_ADC_NAME_STRING,
+	    ab8500_dir);
+	if (!ab8500_gpadc_dir)
+		goto err;
+
+	file = debugfs_create_file("all-bank-registers", S_IRUGO,
+	    ab8500_dir, &plf->dev, &ab8500_registers_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("all-banks", S_IRUGO,
+	    ab8500_dir, &plf->dev, &ab8500_all_banks_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR),
+	    ab8500_dir, &plf->dev, &ab8500_bank_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR),
+	    ab8500_dir, &plf->dev, &ab8500_address_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR),
+	    ab8500_dir, &plf->dev, &ab8500_val_fops);
+	if (!file)
+		goto err;
 
-	ab8500_reg_file = debugfs_create_file("all-bank-registers",
-		S_IRUGO, ab8500_dir, &plf->dev, &ab8500_registers_fops);
-	if (!ab8500_reg_file)
-		goto exit_destroy_dir;
+	file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR),
+	    ab8500_dir, &plf->dev, &ab8500_subscribe_fops);
+	if (!file)
+		goto err;
 
-	ab8500_bank_file = debugfs_create_file("register-bank",
-		(S_IRUGO | S_IWUSR), ab8500_dir, &plf->dev, &ab8500_bank_fops);
-	if (!ab8500_bank_file)
-		goto exit_destroy_reg;
+	if (is_ab8500(ab8500))
+		num_interrupt_lines = AB8500_NR_IRQS;
+	else if (is_ab8505(ab8500))
+		num_interrupt_lines = AB8505_NR_IRQS;
+	else if (is_ab9540(ab8500))
+		num_interrupt_lines = AB9540_NR_IRQS;
 
-	ab8500_address_file = debugfs_create_file("register-address",
-		(S_IRUGO | S_IWUSR), ab8500_dir, &plf->dev,
-		&ab8500_address_fops);
-	if (!ab8500_address_file)
-		goto exit_destroy_bank;
+	file = debugfs_create_file("interrupts", (S_IRUGO),
+	    ab8500_dir, &plf->dev, &ab8500_interrupts_fops);
+	if (!file)
+		goto err;
 
-	ab8500_val_file = debugfs_create_file("register-value",
-		(S_IRUGO | S_IWUSR), ab8500_dir, &plf->dev, &ab8500_val_fops);
-	if (!ab8500_val_file)
-		goto exit_destroy_address;
+	file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR),
+	    ab8500_dir, &plf->dev, &ab8500_unsubscribe_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("hwreg", (S_IRUGO | S_IWUSR),
+	    ab8500_dir, &plf->dev, &ab8500_hwreg_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("bat_ctrl", (S_IRUGO | S_IWUSR),
+	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bat_ctrl_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("btemp_ball", (S_IRUGO | S_IWUSR),
+	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_btemp_ball_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR),
+	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_v_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("acc_detect1", (S_IRUGO | S_IWUSR),
+	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect1_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("acc_detect2", (S_IRUGO | S_IWUSR),
+	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect2_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("adc_aux1", (S_IRUGO | S_IWUSR),
+	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux1_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("adc_aux2", (S_IRUGO | S_IWUSR),
+	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux2_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("main_bat_v", (S_IRUGO | S_IWUSR),
+	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_bat_v_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("vbus_v", (S_IRUGO | S_IWUSR),
+	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_vbus_v_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR),
+	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_c_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR),
+	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_usb_charger_c_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("bk_bat_v", (S_IRUGO | S_IWUSR),
+	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bk_bat_v_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("die_temp", (S_IRUGO | S_IWUSR),
+	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_die_temp_fops);
+	if (!file)
+		goto err;
 
 	return 0;
 
-exit_destroy_address:
-	debugfs_remove(ab8500_address_file);
-exit_destroy_bank:
-	debugfs_remove(ab8500_bank_file);
-exit_destroy_reg:
-	debugfs_remove(ab8500_reg_file);
-exit_destroy_dir:
-	debugfs_remove(ab8500_dir);
-exit_no_debugfs:
+err:
+	if (ab8500_dir)
+		debugfs_remove_recursive(ab8500_dir);
 	dev_err(&plf->dev, "failed to create debugfs entries.\n");
-	return -ENOMEM;
+out_freeevent_name:
+	kfree(event_name);
+out_freedev_attr:
+	kfree(dev_attr);
+out_freeirq_count:
+	kfree(irq_count);
+
+	return ret;
 }
 
 static int ab8500_debug_remove(struct platform_device *plf)
 {
-	debugfs_remove(ab8500_val_file);
-	debugfs_remove(ab8500_address_file);
-	debugfs_remove(ab8500_bank_file);
-	debugfs_remove(ab8500_reg_file);
-	debugfs_remove(ab8500_dir);
+	debugfs_remove_recursive(ab8500_dir);
+	kfree(event_name);
+	kfree(dev_attr);
+	kfree(irq_count);
 
 	return 0;
 }
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index 3fb1f40d..b1f3561 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -12,6 +12,7 @@
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
 #include <linux/delay.h>
+#include <linux/pm_runtime.h>
 #include <linux/platform_device.h>
 #include <linux/completion.h>
 #include <linux/regulator/consumer.h>
@@ -82,6 +83,11 @@
 /* This is used to not lose precision when dividing to get gain and offset */
 #define CALIB_SCALE			1000
 
+/* Time in ms before disabling regulator */
+#define GPADC_AUDOSUSPEND_DELAY		1
+
+#define CONVERSION_TIME			500 /* ms */
+
 enum cal_channels {
 	ADC_INPUT_VMAIN = 0,
 	ADC_INPUT_BTEMP,
@@ -102,10 +108,10 @@ struct adc_cal_data {
 
 /**
  * struct ab8500_gpadc - AB8500 GPADC device information
- * @chip_id			ABB chip id
  * @dev:			pointer to the struct device
  * @node:			a list of AB8500 GPADCs, hence prepared for
 				reentrance
+ * @parent:			pointer to the struct ab8500
  * @ab8500_gpadc_complete:	pointer to the struct completion, to indicate
  *				the completion of gpadc conversion
  * @ab8500_gpadc_lock:		structure of type mutex
@@ -114,9 +120,9 @@ struct adc_cal_data {
  * @cal_data			array of ADC calibration data structs
  */
 struct ab8500_gpadc {
-	u8 chip_id;
 	struct device *dev;
 	struct list_head node;
+	struct ab8500 *parent;
 	struct completion ab8500_gpadc_complete;
 	struct mutex ab8500_gpadc_lock;
 	struct regulator *regu;
@@ -282,8 +288,9 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
 		return -ENODEV;
 
 	mutex_lock(&gpadc->ab8500_gpadc_lock);
+
 	/* Enable VTVout LDO this is required for GPADC */
-	regulator_enable(gpadc->regu);
+	pm_runtime_get_sync(gpadc->dev);
 
 	/* Check if ADC is not busy, lock and proceed */
 	do {
@@ -332,7 +339,7 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
 			EN_BUF | EN_ICHAR);
 		break;
 	case BTEMP_BALL:
-		if (gpadc->chip_id >= AB8500_CUT3P0) {
+		if (!is_ab8500_2p0_or_earlier(gpadc->parent)) {
 			/* Turn on btemp pull-up on ABB 3.0 */
 			ret = abx500_mask_and_set_register_interruptible(
 				gpadc->dev,
@@ -344,7 +351,7 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
 		  * Delay might be needed for ABB8500 cut 3.0, if not, remove
 		  * when hardware will be available
 		  */
-			msleep(1);
+			usleep_range(1000, 1000);
 			break;
 		}
 		/* Intentional fallthrough */
@@ -367,7 +374,8 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
 		goto out;
 	}
 	/* wait for completion of conversion */
-	if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, 2*HZ)) {
+	if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete,
+					 msecs_to_jiffies(CONVERSION_TIME))) {
 		dev_err(gpadc->dev,
 			"timeout: didn't receive GPADC conversion interrupt\n");
 		ret = -EINVAL;
@@ -397,8 +405,10 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
 		dev_err(gpadc->dev, "gpadc_conversion: disable gpadc failed\n");
 		goto out;
 	}
-	/* Disable VTVout LDO this is required for GPADC */
-	regulator_disable(gpadc->regu);
+
+	pm_runtime_mark_last_busy(gpadc->dev);
+	pm_runtime_put_autosuspend(gpadc->dev);
+
 	mutex_unlock(&gpadc->ab8500_gpadc_lock);
 
 	return (high_data << 8) | low_data;
@@ -412,7 +422,9 @@ out:
 	 */
 	(void) abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
 		AB8500_GPADC_CTRL1_REG, DIS_GPADC);
-	regulator_disable(gpadc->regu);
+
+	pm_runtime_put(gpadc->dev);
+
 	mutex_unlock(&gpadc->ab8500_gpadc_lock);
 	dev_err(gpadc->dev,
 		"gpadc_conversion: Failed to AD convert channel %d\n", channel);
@@ -571,6 +583,28 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
 		gpadc->cal_data[ADC_INPUT_VBAT].offset);
 }
 
+static int ab8500_gpadc_runtime_suspend(struct device *dev)
+{
+	struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
+
+	regulator_disable(gpadc->regu);
+	return 0;
+}
+
+static int ab8500_gpadc_runtime_resume(struct device *dev)
+{
+	struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
+
+	regulator_enable(gpadc->regu);
+	return 0;
+}
+
+static int ab8500_gpadc_runtime_idle(struct device *dev)
+{
+	pm_runtime_suspend(dev);
+	return 0;
+}
+
 static int ab8500_gpadc_probe(struct platform_device *pdev)
 {
 	int ret = 0;
@@ -591,6 +625,7 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
 	}
 
 	gpadc->dev = &pdev->dev;
+	gpadc->parent = dev_get_drvdata(pdev->dev.parent);
 	mutex_init(&gpadc->ab8500_gpadc_lock);
 
 	/* Initialize completion used to notify completion of conversion */
@@ -607,14 +642,6 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
 		goto fail;
 	}
 
-	/* Get Chip ID of the ABB ASIC  */
-	ret = abx500_get_chip_id(gpadc->dev);
-	if (ret < 0) {
-		dev_err(gpadc->dev, "failed to get chip ID\n");
-		goto fail_irq;
-	}
-	gpadc->chip_id = (u8) ret;
-
 	/* VTVout LDO used to power up ab8500-GPADC */
 	gpadc->regu = regulator_get(&pdev->dev, "vddadc");
 	if (IS_ERR(gpadc->regu)) {
@@ -622,6 +649,16 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
 		dev_err(gpadc->dev, "failed to get vtvout LDO\n");
 		goto fail_irq;
 	}
+
+	platform_set_drvdata(pdev, gpadc);
+
+	regulator_enable(gpadc->regu);
+
+	pm_runtime_set_autosuspend_delay(gpadc->dev, GPADC_AUDOSUSPEND_DELAY);
+	pm_runtime_use_autosuspend(gpadc->dev);
+	pm_runtime_set_active(gpadc->dev);
+	pm_runtime_enable(gpadc->dev);
+
 	ab8500_gpadc_read_calibration_data(gpadc);
 	list_add_tail(&gpadc->node, &ab8500_gpadc_list);
 	dev_dbg(gpadc->dev, "probe success\n");
@@ -642,19 +679,34 @@ static int ab8500_gpadc_remove(struct platform_device *pdev)
 	list_del(&gpadc->node);
 	/* remove interrupt  - completion of Sw ADC conversion */
 	free_irq(gpadc->irq, gpadc);
-	/* disable VTVout LDO that is being used by GPADC */
-	regulator_put(gpadc->regu);
+
+	pm_runtime_get_sync(gpadc->dev);
+	pm_runtime_disable(gpadc->dev);
+
+	regulator_disable(gpadc->regu);
+
+	pm_runtime_set_suspended(gpadc->dev);
+
+	pm_runtime_put_noidle(gpadc->dev);
+
 	kfree(gpadc);
 	gpadc = NULL;
 	return 0;
 }
 
+static const struct dev_pm_ops ab8500_gpadc_pm_ops = {
+	SET_RUNTIME_PM_OPS(ab8500_gpadc_runtime_suspend,
+			   ab8500_gpadc_runtime_resume,
+			   ab8500_gpadc_runtime_idle)
+};
+
 static struct platform_driver ab8500_gpadc_driver = {
 	.probe = ab8500_gpadc_probe,
 	.remove = ab8500_gpadc_remove,
 	.driver = {
 		.name = "ab8500-gpadc",
 		.owner = THIS_MODULE,
+		.pm = &ab8500_gpadc_pm_ops,
 	},
 };
 
diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
index 8a33b2c..108fd86 100644
--- a/drivers/mfd/ab8500-sysctrl.c
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -7,12 +7,73 @@
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/reboot.h>
+#include <linux/signal.h>
+#include <linux/power_supply.h>
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/mfd/abx500/ab8500-sysctrl.h>
 
 static struct device *sysctrl_dev;
 
+void ab8500_power_off(void)
+{
+	sigset_t old;
+	sigset_t all;
+	static char *pss[] = {"ab8500_ac", "ab8500_usb"};
+	int i;
+	bool charger_present = false;
+	union power_supply_propval val;
+	struct power_supply *psy;
+	int ret;
+
+	/*
+	 * If we have a charger connected and we're powering off,
+	 * reboot into charge-only mode.
+	 */
+
+	for (i = 0; i < ARRAY_SIZE(pss); i++) {
+		psy = power_supply_get_by_name(pss[i]);
+		if (!psy)
+			continue;
+
+		ret = psy->get_property(psy, POWER_SUPPLY_PROP_ONLINE, &val);
+
+		if (!ret && val.intval) {
+			charger_present = true;
+			break;
+		}
+	}
+
+	if (!charger_present)
+		goto shutdown;
+
+	/* Check if battery is known */
+	psy = power_supply_get_by_name("ab8500_btemp");
+	if (psy) {
+		ret = psy->get_property(psy, POWER_SUPPLY_PROP_TECHNOLOGY,
+					&val);
+		if (!ret && val.intval != POWER_SUPPLY_TECHNOLOGY_UNKNOWN) {
+			printk(KERN_INFO
+			       "Charger \"%s\" is connected with known battery."
+			       " Rebooting.\n",
+			       pss[i]);
+			machine_restart("charging");
+		}
+	}
+
+shutdown:
+	sigfillset(&all);
+
+	if (!sigprocmask(SIG_BLOCK, &all, &old)) {
+		(void)ab8500_sysctrl_set(AB8500_STW4500CTRL1,
+					 AB8500_STW4500CTRL1_SWOFF |
+					 AB8500_STW4500CTRL1_SWRESET4500N);
+		(void)sigprocmask(SIG_SETMASK, &old, NULL);
+	}
+}
+
 static inline bool valid_bank(u8 bank)
 {
 	return ((bank == AB8500_SYS_CTRL1_BLOCK) ||
@@ -33,6 +94,7 @@ int ab8500_sysctrl_read(u16 reg, u8 *value)
 	return abx500_get_register_interruptible(sysctrl_dev, bank,
 		(u8)(reg & 0xFF), value);
 }
+EXPORT_SYMBOL(ab8500_sysctrl_read);
 
 int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value)
 {
@@ -48,10 +110,40 @@ int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value)
 	return abx500_mask_and_set_register_interruptible(sysctrl_dev, bank,
 		(u8)(reg & 0xFF), mask, value);
 }
+EXPORT_SYMBOL(ab8500_sysctrl_write);
 
 static int ab8500_sysctrl_probe(struct platform_device *pdev)
 {
+	struct ab8500_platform_data *plat;
+	struct ab8500_sysctrl_platform_data *pdata;
+
 	sysctrl_dev = &pdev->dev;
+	plat = dev_get_platdata(pdev->dev.parent);
+	if (plat->pm_power_off)
+		pm_power_off = ab8500_power_off;
+
+	pdata = plat->sysctrl;
+
+	if (pdata) {
+		int ret, i, j;
+
+		for (i = AB8500_SYSCLKREQ1RFCLKBUF;
+		     i <= AB8500_SYSCLKREQ8RFCLKBUF; i++) {
+			j = i - AB8500_SYSCLKREQ1RFCLKBUF;
+			ret = ab8500_sysctrl_write(i, 0xff,
+						   pdata->initial_req_buf_config[j]);
+			dev_dbg(&pdev->dev,
+				"Setting SysClkReq%dRfClkBuf 0x%X\n",
+				j + 1,
+				pdata->initial_req_buf_config[j]);
+			if (ret < 0) {
+				dev_err(&pdev->dev,
+					"unable to set sysClkReq%dRfClkBuf: "
+					"%d\n", j + 1, ret);
+			}
+		}
+	}
+
 	return 0;
 }
 
diff --git a/drivers/mfd/abx500-core.c b/drivers/mfd/abx500-core.c
index 7ce65f4..9818afb 100644
--- a/drivers/mfd/abx500-core.c
+++ b/drivers/mfd/abx500-core.c
@@ -153,6 +153,22 @@ int abx500_startup_irq_enabled(struct device *dev, unsigned int irq)
 }
 EXPORT_SYMBOL(abx500_startup_irq_enabled);
 
+void abx500_dump_all_banks(void)
+{
+	struct abx500_ops *ops;
+	struct device dummy_child = {0};
+	struct abx500_device_entry *dev_entry;
+
+	list_for_each_entry(dev_entry, &abx500_list, list) {
+		dummy_child.parent = dev_entry->dev;
+		ops = &dev_entry->ops;
+
+		if ((ops != NULL) && (ops->dump_all_banks != NULL))
+			ops->dump_all_banks(&dummy_child);
+	}
+}
+EXPORT_SYMBOL(abx500_dump_all_banks);
+
 MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
 MODULE_DESCRIPTION("ABX500 core driver");
 MODULE_LICENSE("GPL");