Merge tag 'for-v3.9' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "Four new drivers:

   - goldfish_battery:

     This is Android Emulator battery driver.  Originally from Google,
     but Intel folks reshaped it for mainline

   - pm2301_charger:

     A new driver for ST-Ericsson 2301 Power Management chip, uses
     AB8500 battery management core

   - qnap-poweroff:

     The driver adds poweroff functionality for QNAP NAS boxes

   - restart-poweroff:

     A generic driver that implements 'power off by restarting'.  The
     actual poweroff functionality is implemented through a bootloader,
     so Linux' task is just to restart the box.  The driver is useful on
     Buffalo Linkstation LS-XHL and LS-CHLv2 boards.  Andrew Lunn worked
     on submitting the driver (as well as qnap-poweroff above).

  Additionally:

   - A lot of fixes for ab8500 drivers.  This is a part of efforts of
     syncing internal ST-Ericsson development tree with the mainline.
     Lee Jones @ Linaro worked on compilation and reshaping these
     series.

   - New health properties for the power supplies: "Watchdog timer
     expire" and "Safety timer expire"

   - As usual, a bunch of fixes/cleanups here and there"

* tag 'for-v3.9' of git://git.infradead.org/battery-2.6: (81 commits)
  bq2415x_charger: Add support for offline and 100mA mode
  generic-adc-battery: Fix forever loop in gab_remove()
  goldfish_battery: Add missing GENERIC_HARDIRQS dependency
  da9030_battery: Include notifier.h
  bq27x00_battery: Fix reporting battery temperature
  power/reset: Remove newly introduced __dev* annotations
  lp8727_charger: Small cleanup in naming
  ab8500_btemp: Demote initcall sequence
  ds2782_battery: Add power_supply_changed() calls for proper uevent support
  power: Add battery driver for goldfish emulator
  u8500-charger: Delay for USB enumeration
  ab8500-bm: Remove individual [charger|btemp|fg|chargalg] pdata structures
  ab8500-charger: Do not touch VBUSOVV bits
  ab8500-fg: Use correct battery charge full design
  pm2301: LPN mode control support
  pm2301: Enable vbat low monitoring
  ab8500-bm: Flush all work queues before suspending
  ab8500-fg: Go to INIT_RECOVERY when charger removed
  ab8500-charger: Add support for autopower on AB8505 and AB9540
  abx500-chargalg: Add new sysfs interface to get current charge status
  ...

Fix up fairly straightforward conflicts in the ab8500 driver.  But since
it seems to be ARM-specific, I can't even compile-test the result..

1 files changed, 6 insertions, 8 deletions

diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 4778bb1..8b5d685 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -750,6 +750,12 @@ static struct resource ab8500_charger_resources[] = {
 		.end = AB8500_INT_CH_WD_EXP,
 		.flags = IORESOURCE_IRQ,
 	},
+	{
+		.name = "VBUS_CH_DROP_END",
+		.start = AB8500_INT_VBUS_CH_DROP_END,
+		.end = AB8500_INT_VBUS_CH_DROP_END,
+		.flags = IORESOURCE_IRQ,
+	},
 };
 
 static struct resource ab8500_btemp_resources[] = {
@@ -1012,40 +1018,32 @@ static struct mfd_cell ab8500_bm_devs[] = {
 		.of_compatible = "stericsson,ab8500-charger",
 		.num_resources = ARRAY_SIZE(ab8500_charger_resources),
 		.resources = ab8500_charger_resources,
-#ifndef CONFIG_OF
 		.platform_data = &ab8500_bm_data,
 		.pdata_size = sizeof(ab8500_bm_data),
-#endif
 	},
 	{
 		.name = "ab8500-btemp",
 		.of_compatible = "stericsson,ab8500-btemp",
 		.num_resources = ARRAY_SIZE(ab8500_btemp_resources),
 		.resources = ab8500_btemp_resources,
-#ifndef CONFIG_OF
 		.platform_data = &ab8500_bm_data,
 		.pdata_size = sizeof(ab8500_bm_data),
-#endif
 	},
 	{
 		.name = "ab8500-fg",
 		.of_compatible = "stericsson,ab8500-fg",
 		.num_resources = ARRAY_SIZE(ab8500_fg_resources),
 		.resources = ab8500_fg_resources,
-#ifndef CONFIG_OF
 		.platform_data = &ab8500_bm_data,
 		.pdata_size = sizeof(ab8500_bm_data),
-#endif
 	},
 	{
 		.name = "ab8500-chargalg",
 		.of_compatible = "stericsson,ab8500-chargalg",
 		.num_resources = ARRAY_SIZE(ab8500_chargalg_resources),
 		.resources = ab8500_chargalg_resources,
-#ifndef CONFIG_OF
 		.platform_data = &ab8500_bm_data,
 		.pdata_size = sizeof(ab8500_bm_data),
-#endif
 	},
 };