Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (87 commits)
  [SCSI] fusion: fix domain validation loops
  [SCSI] qla2xxx: fix regression on sparc64
  [SCSI] modalias for scsi devices
  [SCSI] sg: cap reserved_size values at max_sectors
  [SCSI] BusLogic: stop using check_region
  [SCSI] tgt: fix rdma transfer bugs
  [SCSI] aacraid: fix aacraid not finding device
  [SCSI] aacraid: Correct SMC products in aacraid.txt
  [SCSI] scsi_error.c: Add EH Start Unit retry
  [SCSI] aacraid: [Fastboot] Panics for AACRAID driver during 'insmod' for kexec test.
  [SCSI] ipr: Driver version to 2.3.2
  [SCSI] ipr: Faster sg list fetch
  [SCSI] ipr: Return better qc_issue errors
  [SCSI] ipr: Disrupt device error
  [SCSI] ipr: Improve async error logging level control
  [SCSI] ipr: PCI unblock config access fix
  [SCSI] ipr: Fix for oops following SATA request sense
  [SCSI] ipr: Log error for SAS dual path switch
  [SCSI] ipr: Enable logging of debug error data for all devices
  [SCSI] ipr: Add new PCI-E IDs to device table
  ...

4 files changed, 51 insertions, 48 deletions

diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 083acfd..97471af 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1531,6 +1531,7 @@ mpt_resume(struct pci_dev *pdev)
 	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
 	u32 device_state = pdev->current_state;
 	int recovery_state;
+	int err;
 
 	printk(MYIOC_s_INFO_FMT
 	"pci-resume: pdev=0x%p, slot=%s, Previous operating state [D%d]\n",
@@ -1538,7 +1539,9 @@ mpt_resume(struct pci_dev *pdev)
 
 	pci_set_power_state(pdev, 0);
 	pci_restore_state(pdev);
-	pci_enable_device(pdev);
+	err = pci_enable_device(pdev);
+	if (err)
+		return err;
 
 	/* enable interrupts */
 	CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
@@ -4739,12 +4742,8 @@ mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
 }
 
 /**
- * mpt_inactive_raid_list_free
- *
- * This clears this link list.
- *
- * @ioc - pointer to per adapter structure
- *
+ * mpt_inactive_raid_list_free - This clears this link list.
+ * @ioc : pointer to per adapter structure
  **/
 static void
 mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
@@ -4764,15 +4763,11 @@ mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
 }
 
 /**
- * mpt_inactive_raid_volumes
- *
- * This sets up link list of phy_disk_nums for devices belonging in an inactive volume
- *
- * @ioc - pointer to per adapter structure
- * @channel - volume channel
- * @id - volume target id
- *
+ * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume
  *
+ * @ioc : pointer to per adapter structure
+ * @channel : volume channel
+ * @id : volume target id
  **/
 static void
 mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
@@ -6663,7 +6658,7 @@ union loginfo_type {
 /**
  *	mpt_iocstatus_info_config - IOCSTATUS information for config pages
  *	@ioc: Pointer to MPT_ADAPTER structure
- *	ioc_status: U32 IOCStatus word from IOC
+ *	@ioc_status: U32 IOCStatus word from IOC
  *	@mf: Pointer to MPT request frame
  *
  *	Refer to lsi/mpi.h.
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index e3a3927..d25d3be 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -994,6 +994,7 @@ typedef struct _MPT_SCSI_HOST {
 	int			  scandv_wait_done;
 	long			  last_queue_full;
 	u16			  tm_iocstatus;
+	u16			  spi_pending;
 	struct list_head	  target_reset_list;
 } MPT_SCSI_HOST;
 
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 2a3e9e66..fa0f776 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -819,10 +819,7 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 			sc->resid=0;
 		case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR:	/* 0x0040 */
 		case MPI_IOCSTATUS_SUCCESS:			/* 0x0000 */
-			if (scsi_status == MPI_SCSI_STATUS_BUSY)
-				sc->result = (DID_BUS_BUSY << 16) | scsi_status;
-			else
-				sc->result = (DID_OK << 16) | scsi_status;
+			sc->result = (DID_OK << 16) | scsi_status;
 			if (scsi_state == 0) {
 				;
 			} else if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) {
@@ -1188,20 +1185,7 @@ mptscsih_suspend(struct pci_dev *pdev, pm_message_t state)
 int
 mptscsih_resume(struct pci_dev *pdev)
 {
-	MPT_ADAPTER 		*ioc = pci_get_drvdata(pdev);
-	struct Scsi_Host 	*host = ioc->sh;
-	MPT_SCSI_HOST		*hd;
-
-	mpt_resume(pdev);
-
-	if(!host)
-		return 0;
-
-	hd = (MPT_SCSI_HOST *)host->hostdata;
-	if(!hd)
-		return 0;
-
-	return 0;
+	return mpt_resume(pdev);
 }
 
 #endif
@@ -1537,21 +1521,23 @@ mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx)
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /**
  *	mptscsih_TMHandler - Generic handler for SCSI Task Management.
- *	Fall through to mpt_HardResetHandler if: not operational, too many
- *	failed TM requests or handshake failure.
- *
- *	@ioc: Pointer to MPT_ADAPTER structure
+ *	@hd: Pointer to MPT SCSI HOST structure
  *	@type: Task Management type
+ *	@channel: channel number for task management
  *	@id: Logical Target ID for reset (if appropriate)
  *	@lun: Logical Unit for reset (if appropriate)
  *	@ctx2abort: Context for the task to be aborted (if appropriate)
+ *	@timeout: timeout for task management control
+ *
+ *	Fall through to mpt_HardResetHandler if: not operational, too many
+ *	failed TM requests or handshake failure.
  *
  *	Remark: Currently invoked from a non-interrupt thread (_bh).
  *
  *	Remark: With old EH code, at most 1 SCSI TaskMgmt function per IOC
  *	will be active.
  *
- *	Returns 0 for SUCCESS, or FAILED.
+ *	Returns 0 for SUCCESS, or %FAILED.
  **/
 int
 mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout)
@@ -1650,9 +1636,11 @@ mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int c
  *	mptscsih_IssueTaskMgmt - Generic send Task Management function.
  *	@hd: Pointer to MPT_SCSI_HOST structure
  *	@type: Task Management type
+ *	@channel: channel number for task management
  *	@id: Logical Target ID for reset (if appropriate)
  *	@lun: Logical Unit for reset (if appropriate)
  *	@ctx2abort: Context for the task to be aborted (if appropriate)
+ *	@timeout: timeout for task management control
  *
  *	Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
  *	or a non-interrupt thread.  In the former, must not call schedule().
@@ -2022,6 +2010,7 @@ mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd)
 /**
  *	mptscsih_tm_wait_for_completion - wait for completion of TM task
  *	@hd: Pointer to MPT host structure.
+ *	@timeout: timeout value
  *
  *	Returns {SUCCESS,FAILED}.
  */
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 85f21b5..d75f7ff 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -96,14 +96,13 @@ static int	mptspiTaskCtx = -1;
 static int	mptspiInternalCtx = -1; /* Used only for internal commands */
 
 /**
- * 	mptspi_setTargetNegoParms  - Update the target negotiation
- *	parameters based on the the Inquiry data, adapter capabilities,
- *	and NVRAM settings
- *
+ * 	mptspi_setTargetNegoParms  - Update the target negotiation parameters
  *	@hd: Pointer to a SCSI Host Structure
- *	@vtarget: per target private data
+ *	@target: per target private data
  *	@sdev: SCSI device
  *
+ * 	Update the target negotiation parameters based on the the Inquiry
+ *	data, adapter capabilities, and NVRAM settings.
  **/
 static void
 mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target,
@@ -234,7 +233,7 @@ mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target,
 /**
  * 	mptspi_writeIOCPage4  - write IOC Page 4
  *	@hd: Pointer to a SCSI Host Structure
- *	@channel:
+ *	@channel: channel number
  *	@id: write IOC Page4 for this ID & Bus
  *
  *	Return: -EAGAIN if unable to obtain a Message Frame
@@ -446,7 +445,7 @@ static int mptspi_target_alloc(struct scsi_target *starget)
 	return 0;
 }
 
-void
+static void
 mptspi_target_destroy(struct scsi_target *starget)
 {
 	if (starget->hostdata)
@@ -677,7 +676,9 @@ static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd,
 		return;
 	}
 
+	hd->spi_pending |= (1 << sdev->id);
 	spi_dv_device(sdev);
+	hd->spi_pending &= ~(1 << sdev->id);
 
 	if (sdev->channel == 1 &&
 	    mptscsih_quiesce_raid(hd, 0, vtarget->channel, vtarget->id) < 0)
@@ -1203,11 +1204,27 @@ mptspi_dv_renegotiate_work(struct work_struct *work)
 		container_of(work, struct work_queue_wrapper, work);
 	struct _MPT_SCSI_HOST *hd = wqw->hd;
 	struct scsi_device *sdev;
+	struct scsi_target *starget;
+	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
+	u32 nego;
 
 	kfree(wqw);
 
-	shost_for_each_device(sdev, hd->ioc->sh)
-		mptspi_dv_device(hd, sdev);
+	if (hd->spi_pending) {
+		shost_for_each_device(sdev, hd->ioc->sh) {
+			if  (hd->spi_pending & (1 << sdev->id))
+				continue;
+			starget = scsi_target(sdev);
+			nego = mptspi_getRP(starget);
+			pg1.RequestedParameters = cpu_to_le32(nego);
+			pg1.Reserved = 0;
+			pg1.Configuration = 0;
+			mptspi_write_spi_device_pg1(starget, &pg1);
+		}
+	} else {
+		shost_for_each_device(sdev, hd->ioc->sh)
+			mptspi_dv_device(hd, sdev);
+	}
 }
 
 static void
@@ -1453,6 +1470,7 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	init_waitqueue_head(&hd->scandv_waitq);
 	hd->scandv_wait_done = 0;
 	hd->last_queue_full = 0;
+	hd->spi_pending = 0;
 
 	/* Some versions of the firmware don't support page 0; without
 	 * that we can't get the parameters */