summaryrefslogtreecommitdiffstats
path: root/drivers/memory
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-09-06 13:30:06 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-09-06 13:30:06 -0700
commitb4b50fd78b1e31989940dfc647e64453d0f7176a (patch)
tree1a55f110e021c02963b63759f3f18ea7ba3aa228 /drivers/memory
parentdccfd1e439c11422d7aca0d834b0430d24650e85 (diff)
parentf97c43bbdf8a1ea42477b1a804a48e7e368cb13c (diff)
downloadop-kernel-dev-b4b50fd78b1e31989940dfc647e64453d0f7176a.zip
op-kernel-dev-b4b50fd78b1e31989940dfc647e64453d0f7176a.tar.gz
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform changes from Olof Johansson: "This branch contains mostly additions and changes to platform enablement and SoC-level drivers. Since there's sometimes a dependency on device-tree changes, there's also a fair amount of those in this branch. Pieces worth mentioning are: - Mbus driver for Marvell platforms, allowing kernel configuration and resource allocation of on-chip peripherals. - Enablement of the mbus infrastructure from Marvell PCI-e drivers. - Preparation of MSI support for Marvell platforms. - Addition of new PCI-e host controller driver for Tegra platforms - Some churn caused by sharing of macro names between i.MX 6Q and 6DL platforms in the device tree sources and header files. - Various suspend/PM updates for Tegra, including LP1 support. - Versatile Express support for MCPM, part of big little support. - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7) - OMAP2+ support for DRA7, a new Cortex-A15-based SoC. The code that touches other architectures are patches moving MSI arch-specific functions over to weak symbols and removal of ARCH_SUPPORTS_MSI, acked by PCI maintainers" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits) tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list ARM: dts: vf610-twr: enable i2c0 device ARM: dts: i.MX51: Add one more I2C2 pinmux entry ARM: dts: i.MX51: Move pins configuration under "iomuxc" label ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX ARM: dts: i.MX27: Disable AUDMUX in the template ARM: dts: wandboard: Add support for SDIO bcm4329 ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template ARM: dts: imx53-qsb: Make USBH1 functional ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module ARM: dts: imx6qdl-sabresd: Add touchscreen support ARM: imx: add ocram clock for imx53 ARM: dts: imx: ocram size is different between imx6q and imx6dl ARM: dts: imx27-phytec-phycore-som: Fix regulator settings ARM: dts: i.MX27: Remove clock name from CPU node ...
Diffstat (limited to 'drivers/memory')
-rw-r--r--drivers/memory/mvebu-devbus.c72
1 files changed, 2 insertions, 70 deletions
diff --git a/drivers/memory/mvebu-devbus.c b/drivers/memory/mvebu-devbus.c
index 978e8e3..110c036 100644
--- a/drivers/memory/mvebu-devbus.c
+++ b/drivers/memory/mvebu-devbus.c
@@ -44,14 +44,6 @@
#define READ_PARAM_OFFSET 0x0
#define WRITE_PARAM_OFFSET 0x4
-static const char * const devbus_wins[] = {
- "devbus-boot",
- "devbus-cs0",
- "devbus-cs1",
- "devbus-cs2",
- "devbus-cs3",
-};
-
struct devbus_read_params {
u32 bus_width;
u32 badr_skew;
@@ -208,16 +200,11 @@ static int mvebu_devbus_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *node = pdev->dev.of_node;
- struct device_node *parent;
struct devbus *devbus;
struct resource *res;
struct clk *clk;
unsigned long rate;
- const __be32 *ranges;
- int err, cs;
- int addr_cells, p_addr_cells, size_cells;
- int ranges_len, tuple_len;
- u32 base, size;
+ int err;
devbus = devm_kzalloc(&pdev->dev, sizeof(struct devbus), GFP_KERNEL);
if (!devbus)
@@ -248,68 +235,13 @@ static int mvebu_devbus_probe(struct platform_device *pdev)
return err;
/*
- * Allocate an address window for this device.
- * If the device probing fails, then we won't be able to
- * remove the allocated address decoding window.
- *
- * FIXME: This is only a temporary hack! We need to do this here
- * because we still don't have device tree bindings for mbus.
- * Once that support is added, we will declare these address windows
- * statically in the device tree, and remove the window configuration
- * from here.
- */
-
- /*
- * Get the CS to choose the window string.
- * This is a bit hacky, but it will be removed once the
- * address windows are declared in the device tree.
- */
- cs = (((unsigned long)devbus->base) % 0x400) / 8;
-
- /*
- * Parse 'ranges' property to obtain a (base,size) window tuple.
- * This will be removed once the address windows
- * are declared in the device tree.
- */
- parent = of_get_parent(node);
- if (!parent)
- return -EINVAL;
-
- p_addr_cells = of_n_addr_cells(parent);
- of_node_put(parent);
-
- addr_cells = of_n_addr_cells(node);
- size_cells = of_n_size_cells(node);
- tuple_len = (p_addr_cells + addr_cells + size_cells) * sizeof(__be32);
-
- ranges = of_get_property(node, "ranges", &ranges_len);
- if (ranges == NULL || ranges_len != tuple_len)
- return -EINVAL;
-
- base = of_translate_address(node, ranges + addr_cells);
- if (base == OF_BAD_ADDR)
- return -EINVAL;
- size = of_read_number(ranges + addr_cells + p_addr_cells, size_cells);
-
- /*
- * Create an mbus address windows.
- * FIXME: Remove this, together with the above code, once the
- * address windows are declared in the device tree.
- */
- err = mvebu_mbus_add_window(devbus_wins[cs], base, size);
- if (err < 0)
- return err;
-
- /*
* We need to create a child device explicitly from here to
* guarantee that the child will be probed after the timing
* parameters for the bus are written.
*/
err = of_platform_populate(node, NULL, NULL, dev);
- if (err < 0) {
- mvebu_mbus_del_window(base, size);
+ if (err < 0)
return err;
- }
return 0;
}
OpenPOWER on IntegriCloud