Merge branch 'for-next' into for-linus

Conflicts:
	Documentation/filesystems/proc.txt
	arch/arm/mach-u300/include/mach/debug-macro.S
	drivers/net/qlge/qlge_ethtool.c
	drivers/net/qlge/qlge_main.c
	drivers/net/typhoon.c

6 files changed, 10 insertions, 10 deletions

diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h
index 52e4ce4..80dda30 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.h
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.h
@@ -214,14 +214,14 @@ struct dvb_tuner_ops {
 	int (*get_status)(struct dvb_frontend *fe, u32 *status);
 	int (*get_rf_strength)(struct dvb_frontend *fe, u16 *strength);
 
-	/** These are provided seperately from set_params in order to facilitate silicon
-	 * tuners which require sophisticated tuning loops, controlling each parameter seperately. */
+	/** These are provided separately from set_params in order to facilitate silicon
+	 * tuners which require sophisticated tuning loops, controlling each parameter separately. */
 	int (*set_frequency)(struct dvb_frontend *fe, u32 frequency);
 	int (*set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth);
 
 	/*
-	 * These are provided seperately from set_params in order to facilitate silicon
-	 * tuners which require sophisticated tuning loops, controlling each parameter seperately.
+	 * These are provided separately from set_params in order to facilitate silicon
+	 * tuners which require sophisticated tuning loops, controlling each parameter separately.
 	 */
 	int (*set_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state);
 	int (*get_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state);
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 12279f6..716870a 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -4404,7 +4404,7 @@ static void rv605_muxsel(struct bttv *btv, unsigned int input)
 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
  *
  * The CS16 (available on eBay cheap) is a PCI board with four Fusion
- * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
+ * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
  * chips, ten eight input analog multiplexors, a not chip and a few
  * other components.
  *
@@ -4426,7 +4426,7 @@ static void rv605_muxsel(struct bttv *btv, unsigned int input)
  *
  * There is an ATMEL microcontroller with an 8031 core on board.  I have not
  * determined what function (if any) it provides.  With the microcontroller
- * and sync seperator chips a guess is that it might have to do with video
+ * and sync separator chips a guess is that it might have to do with video
  * switching and maybe some digital I/O.
  */
 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index bc4ced6..f36e11a 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -512,7 +512,7 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 /*
  * The FX2 chip does not give us a zero length read at end of frame.
  * It does, however, give a short read at the end of a frame, if
- * neccessary, rather than run two frames together.
+ * necessary, rather than run two frames together.
  *
  * By choosing the right bulk transfer size, we are guaranteed to always
  * get a short read for the last read of each frame.  Frame sizes are
diff --git a/drivers/media/video/pwc/philips.txt b/drivers/media/video/pwc/philips.txt
index f9f3584..d38dd79 100644
--- a/drivers/media/video/pwc/philips.txt
+++ b/drivers/media/video/pwc/philips.txt
@@ -33,7 +33,7 @@ a lot of extra information, a FAQ, and the binary plugin 'PWCX'. This plugin
 contains decompression routines that allow you to use higher image sizes and
 framerates; in addition the webcam uses less bandwidth on the USB bus (handy
 if you want to run more than 1 camera simultaneously). These routines fall
-under a NDA, and may therefor not be distributed as source; however, its use
+under a NDA, and may therefore not be distributed as source; however, its use
 is completely optional.
 
 You can build this code either into your kernel, or as a module. I recommend
diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/video/sn9c102/sn9c102_sensor.h
index 4af7382..494957b 100644
--- a/drivers/media/video/sn9c102/sn9c102_sensor.h
+++ b/drivers/media/video/sn9c102/sn9c102_sensor.h
@@ -120,7 +120,7 @@ extern int sn9c102_write_regs(struct sn9c102_device*, const u8 valreg[][2],
 /*
    Write multiple registers with constant values. For example:
    sn9c102_write_const_regs(cam, {0x00, 0x14}, {0x60, 0x17}, {0x0f, 0x18});
-   Register adresses must be < 256.
+   Register addresses must be < 256.
 */
 #define sn9c102_write_const_regs(sn9c102_device, data...)                     \
 	({ static const u8 _valreg[][2] = {data};                             \
diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c
index 0446524..6bf6bc7 100644
--- a/drivers/media/video/tea6420.c
+++ b/drivers/media/video/tea6420.c
@@ -6,7 +6,7 @@
 
     The tea6420 is a bus controlled audio-matrix with 5 stereo inputs,
     4 stereo outputs and gain control for each output.
-    It is cascadable, i.e. it can be found at the adresses 0x98
+    It is cascadable, i.e. it can be found at the addresses 0x98
     and 0x9a on the i2c-bus.
 
     For detailed informations download the specifications directly