diff options
| author | Matt LaPlante <kernel1@cyberdogtech.com> | 2006-11-30 05:24:39 +0100 |
|---|---|---|
| committer | Adrian Bunk <bunk@stusta.de> | 2006-11-30 05:24:39 +0100 |
| commit | 0779bf2d2ecc4d9b1e9437ae659f50e6776a7666 (patch) | |
| tree | dbcc9735ab63a833056572c8f4f0efe911246562 /drivers/media | |
| parent | 3cb2fccc5f48a4d6269dfd00b4db570fca2a04d5 (diff) | |
| download | op-kernel-dev-0779bf2d2ecc4d9b1e9437ae659f50e6776a7666.zip op-kernel-dev-0779bf2d2ecc4d9b1e9437ae659f50e6776a7666.tar.gz | |
Fix misc .c/.h comment typos
Fix various .c/.h typos in comments (no code changes).
Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Diffstat (limited to 'drivers/media')
| -rw-r--r-- | drivers/media/dvb/ttpci/budget-patch.c | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c index fc1267b..9a15539 100644 --- a/drivers/media/dvb/ttpci/budget-patch.c +++ b/drivers/media/dvb/ttpci/budget-patch.c @@ -500,14 +500,14 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte /* New design (By Emard) ** this rps1 code will copy internal HS event to GPIO3 pin. -** GPIO3 is in budget-patch hardware connectd to port B VSYNC +** GPIO3 is in budget-patch hardware connected to port B VSYNC ** HS is an internal event of 7146, accessible with RPS ** and temporarily raised high every n lines ** (n in defined in the RPS_THRESH1 counter threshold) ** I think HS is raised high on the beginning of the n-th line ** and remains high until this n-th line that triggered -** it is completely received. When the receiption of n-th line +** it is completely received. When the reception of n-th line ** ends, HS is lowered. ** To transmit data over DMA, 7146 needs changing state at @@ -541,7 +541,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte ** hardware debug note: a working budget card (including budget patch) ** with vpeirq() interrupt setup in mode "0x90" (every 64K) will ** generate 3 interrupts per 25-Hz DMA frame of 2*188*512 bytes -** and that means 3*25=75 Hz of interrupt freqency, as seen by +** and that means 3*25=75 Hz of interrupt frequency, as seen by ** watch cat /proc/interrupts ** ** If this frequency is 3x lower (and data received in the DMA @@ -550,7 +550,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte ** this means VSYNC line is not connected in the hardware. ** (check soldering pcb and pins) ** The same behaviour of missing VSYNC can be duplicated on budget -** cards, by seting DD1_INIT trigger mode 7 in 3rd nibble. +** cards, by setting DD1_INIT trigger mode 7 in 3rd nibble. */ // Setup RPS1 "program" (p35) |
