[media] move i2c files into drivers/media/i2c

Move ancillary I2C drivers into drivers/media/i2c, in order to
better organize them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

104 files changed, 3 insertions, 58022 deletions

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index a7bd9576c..f2171e7 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -1,578 +1,4 @@
-#
-# Generic video config states
-#
-
-config VIDEO_BTCX
-	depends on PCI
-	tristate
-
-config VIDEO_TVEEPROM
-	tristate
-	depends on I2C
-
-#
-# Multimedia Video device configuration
-#
-
-menuconfig VIDEO_CAPTURE_DRIVERS
-	bool "Video capture adapters"
-	depends on VIDEO_V4L2
-	depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT
-	default y
-	---help---
-	  Say Y here to enable selecting the video adapters for
-	  webcams, analog TV, and hybrid analog/digital TV.
-	  Some of those devices also supports FM radio.
-
-if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2
-
-config VIDEO_HELPER_CHIPS_AUTO
-	bool "Autoselect pertinent encoders/decoders and other helper chips"
-	default y if !EXPERT
-	---help---
-	  Most video cards may require additional modules to encode or
-	  decode audio/video standards. This option will autoselect
-	  all pertinent modules to each selected video module.
-
-	  Unselect this only if you know exactly what you are doing, since
-	  it may break support on some boards.
-
-	  In doubt, say Y.
-
-config VIDEO_IR_I2C
-	tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
-	depends on I2C && RC_CORE
-	default y
-	---help---
-	  Most boards have an IR chip directly connected via GPIO. However,
-	  some video boards have the IR connected via I2C bus.
-
-	  If your board doesn't have an I2C IR chip, you may disable this
-	  option.
-
-	  In doubt, say Y.
-
-#
-# Encoder / Decoder module configuration
-#
-
-menu "Encoders, decoders, sensors and other helper chips"
-	visible if !VIDEO_HELPER_CHIPS_AUTO
-
-comment "Audio decoders, processors and mixers"
-
-config VIDEO_TVAUDIO
-	tristate "Simple audio decoder chips"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for several audio decoder chips found on some bt8xx boards:
-	  Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
-		   tea6320, tea6420, tda8425, ta8874z.
-	  Microchip: pic16c54 based design on ProVideo PV951 board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tvaudio.
-
-config VIDEO_TDA7432
-	tristate "Philips TDA7432 audio processor"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for tda7432 audio decoder chip found on some bt8xx boards.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tda7432.
-
-config VIDEO_TDA9840
-	tristate "Philips TDA9840 audio processor"
-	depends on I2C
-	---help---
-	  Support for tda9840 audio decoder chip found on some Zoran boards.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tda9840.
-
-config VIDEO_TEA6415C
-	tristate "Philips TEA6415C audio processor"
-	depends on I2C
-	---help---
-	  Support for tea6415c audio decoder chip found on some bt8xx boards.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tea6415c.
-
-config VIDEO_TEA6420
-	tristate "Philips TEA6420 audio processor"
-	depends on I2C
-	---help---
-	  Support for tea6420 audio decoder chip found on some bt8xx boards.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tea6420.
-
-config VIDEO_MSP3400
-	tristate "Micronas MSP34xx audio decoders"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Micronas MSP34xx series of audio decoders.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called msp3400.
-
-config VIDEO_CS5345
-	tristate "Cirrus Logic CS5345 audio ADC"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Cirrus Logic CS5345 24-bit, 192 kHz
-	  stereo A/D converter.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cs5345.
-
-config VIDEO_CS53L32A
-	tristate "Cirrus Logic CS53L32A audio ADC"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Cirrus Logic CS53L32A low voltage
-	  stereo A/D converter.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cs53l32a.
-
-config VIDEO_TLV320AIC23B
-	tristate "Texas Instruments TLV320AIC23B audio codec"
-	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
-	---help---
-	  Support for the Texas Instruments TLV320AIC23B audio codec.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tlv320aic23b.
-
-config VIDEO_WM8775
-	tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Wolfson Microelectronics WM8775 high
-	  performance stereo A/D Converter with a 4 channel input mixer.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called wm8775.
-
-config VIDEO_WM8739
-	tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Wolfson Microelectronics WM8739
-	  stereo A/D Converter.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called wm8739.
-
-config VIDEO_VP27SMPX
-	tristate "Panasonic VP27s internal MPX"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the internal MPX of the Panasonic VP27s tuner.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vp27smpx.
-
-comment "RDS decoders"
-
-config VIDEO_SAA6588
-	tristate "SAA6588 Radio Chip RDS decoder support"
-	depends on VIDEO_V4L2 && I2C
-
-	help
-	  Support for this Radio Data System (RDS) decoder. This allows
-	  seeing radio station identification transmitted using this
-	  standard.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called saa6588.
-
-comment "Video decoders"
-
-config VIDEO_ADV7180
-	tristate "Analog Devices ADV7180 decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Analog Devices ADV7180 video decoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called adv7180.
-
-config VIDEO_ADV7183
-	tristate "Analog Devices ADV7183 decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  V4l2 subdevice driver for the Analog Devices
-	  ADV7183 video decoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called adv7183.
-
-config VIDEO_BT819
-	tristate "BT819A VideoStream decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for BT819A video decoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bt819.
-
-config VIDEO_BT856
-	tristate "BT856 VideoStream decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for BT856 video decoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bt856.
-
-config VIDEO_BT866
-	tristate "BT866 VideoStream decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for BT866 video decoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bt866.
-
-config VIDEO_KS0127
-	tristate "KS0127 video decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for KS0127 video decoder.
-
-	  This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
-	  cards.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ks0127.
-
-config VIDEO_SAA7110
-	tristate "Philips SAA7110 video decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Philips SAA7110 video decoders.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called saa7110.
-
-config VIDEO_SAA711X
-	tristate "Philips SAA7111/3/4/5 video decoders"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Philips SAA7111/3/4/5 video decoders.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called saa7115.
-
-config VIDEO_SAA7191
-	tristate "Philips SAA7191 video decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Philips SAA7191 video decoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called saa7191.
-
-config VIDEO_TVP514X
-	tristate "Texas Instruments TVP514x video decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
-	  decoder. It is currently working with the TI OMAP3 camera
-	  controller.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tvp514x.
-
-config VIDEO_TVP5150
-	tristate "Texas Instruments TVP5150 video decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Texas Instruments TVP5150 video decoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tvp5150.
-
-config VIDEO_TVP7002
-	tristate "Texas Instruments TVP7002 video decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Texas Instruments TVP7002 video decoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tvp7002.
-
-config VIDEO_VPX3220
-	tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for VPX322x video decoders.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vpx3220.
-
-comment "Video and audio decoders"
-
-config VIDEO_SAA717X
-	tristate "Philips SAA7171/3/4 audio/video decoders"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Philips SAA7171/3/4 audio/video decoders.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called saa717x.
-
-source "drivers/media/video/cx25840/Kconfig"
-
-comment "MPEG video encoders"
-
-config VIDEO_CX2341X
-	tristate "Conexant CX2341x MPEG encoders"
-	depends on VIDEO_V4L2 && VIDEO_V4L2_COMMON
-	---help---
-	  Support for the Conexant CX23416 MPEG encoders
-	  and CX23415 MPEG encoder/decoders.
-
-	  This module currently supports the encoding functions only.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cx2341x.
-
-comment "Video encoders"
-
-config VIDEO_SAA7127
-	tristate "Philips SAA7127/9 digital video encoders"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Philips SAA7127/9 digital video encoders.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called saa7127.
-
-config VIDEO_SAA7185
-	tristate "Philips SAA7185 video encoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Philips SAA7185 video encoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called saa7185.
-
-config VIDEO_ADV7170
-	tristate "Analog Devices ADV7170 video encoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Analog Devices ADV7170 video encoder driver
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called adv7170.
-
-config VIDEO_ADV7175
-	tristate "Analog Devices ADV7175 video encoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Analog Devices ADV7175 video encoder driver
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called adv7175.
-
-config VIDEO_ADV7343
-	tristate "ADV7343 video encoder"
-	depends on I2C
-	help
-	  Support for Analog Devices I2C bus based ADV7343 encoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called adv7343.
-
-config VIDEO_ADV7393
-	tristate "ADV7393 video encoder"
-	depends on I2C
-	help
-	  Support for Analog Devices I2C bus based ADV7393 encoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called adv7393.
-
-config VIDEO_AK881X
-	tristate "AK8813/AK8814 video encoders"
-	depends on I2C
-	help
-	  Video output driver for AKM AK8813 and AK8814 TV encoders
-
-comment "Camera sensor devices"
-
-config VIDEO_APTINA_PLL
-	tristate
-
-config VIDEO_SMIAPP_PLL
-	tristate
-
-config VIDEO_OV7670
-	tristate "OmniVision OV7670 sensor support"
-	depends on I2C && VIDEO_V4L2
-	depends on MEDIA_CAMERA_SUPPORT
-	---help---
-	  This is a Video4Linux2 sensor-level driver for the OmniVision
-	  OV7670 VGA camera.  It currently only works with the M88ALP01
-	  controller.
-
-config VIDEO_VS6624
-	tristate "ST VS6624 sensor support"
-	depends on VIDEO_V4L2 && I2C
-	depends on MEDIA_CAMERA_SUPPORT
-	---help---
-	  This is a Video4Linux2 sensor-level driver for the ST VS6624
-	  camera.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vs6624.
-
-config VIDEO_MT9M032
-	tristate "MT9M032 camera sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
-	depends on MEDIA_CAMERA_SUPPORT
-	select VIDEO_APTINA_PLL
-	---help---
-	  This driver supports MT9M032 camera sensors from Aptina, monochrome
-	  models only.
-
-config VIDEO_MT9P031
-	tristate "Aptina MT9P031 support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
-	depends on MEDIA_CAMERA_SUPPORT
-	select VIDEO_APTINA_PLL
-	---help---
-	  This is a Video4Linux2 sensor-level driver for the Aptina
-	  (Micron) mt9p031 5 Mpixel camera.
-
-config VIDEO_MT9T001
-	tristate "Aptina MT9T001 support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
-	depends on MEDIA_CAMERA_SUPPORT
-	---help---
-	  This is a Video4Linux2 sensor-level driver for the Aptina
-	  (Micron) mt0t001 3 Mpixel camera.
-
-config VIDEO_MT9V011
-	tristate "Micron mt9v011 sensor support"
-	depends on I2C && VIDEO_V4L2
-	depends on MEDIA_CAMERA_SUPPORT
-	---help---
-	  This is a Video4Linux2 sensor-level driver for the Micron
-	  mt0v011 1.3 Mpixel camera.  It currently only works with the
-	  em28xx driver.
-
-config VIDEO_MT9V032
-	tristate "Micron MT9V032 sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
-	depends on MEDIA_CAMERA_SUPPORT
-	---help---
-	  This is a Video4Linux2 sensor-level driver for the Micron
-	  MT9V032 752x480 CMOS sensor.
-
-config VIDEO_TCM825X
-	tristate "TCM825x camera sensor support"
-	depends on I2C && VIDEO_V4L2
-	depends on MEDIA_CAMERA_SUPPORT
-	---help---
-	  This is a driver for the Toshiba TCM825x VGA camera sensor.
-	  It is used for example in Nokia N800.
-
-config VIDEO_SR030PC30
-	tristate "Siliconfile SR030PC30 sensor support"
-	depends on I2C && VIDEO_V4L2
-	depends on MEDIA_CAMERA_SUPPORT
-	---help---
-	  This driver supports SR030PC30 VGA camera from Siliconfile
-
-config VIDEO_NOON010PC30
-	tristate "Siliconfile NOON010PC30 sensor support"
-	depends on I2C && VIDEO_V4L2 && EXPERIMENTAL && VIDEO_V4L2_SUBDEV_API
-	depends on MEDIA_CAMERA_SUPPORT
-	---help---
-	  This driver supports NOON010PC30 CIF camera from Siliconfile
-
-source "drivers/media/video/m5mols/Kconfig"
-
-config VIDEO_S5K6AA
-	tristate "Samsung S5K6AAFX sensor support"
-	depends on MEDIA_CAMERA_SUPPORT
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
-	---help---
-	  This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M
-	  camera sensor with an embedded SoC image signal processor.
-
-source "drivers/media/video/smiapp/Kconfig"
-
-comment "Flash devices"
-
-config VIDEO_ADP1653
-	tristate "ADP1653 flash support"
-	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
-	depends on MEDIA_CAMERA_SUPPORT
-	---help---
-	  This is a driver for the ADP1653 flash controller. It is used for
-	  example in Nokia N900.
-
-config VIDEO_AS3645A
-	tristate "AS3645A flash driver support"
-	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
-	depends on MEDIA_CAMERA_SUPPORT
-	---help---
-	  This is a driver for the AS3645A and LM3555 flash controllers. It has
-	  build in control for flash, torch and indicator LEDs.
-
-comment "Video improvement chips"
-
-config VIDEO_UPD64031A
-	tristate "NEC Electronics uPD64031A Ghost Reduction"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the NEC Electronics uPD64031A Ghost Reduction
-	  video chip. It is most often found in NTSC TV cards made for
-	  Japan and is used to reduce the 'ghosting' effect that can
-	  be present in analog TV broadcasts.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called upd64031a.
-
-config VIDEO_UPD64083
-	tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the NEC Electronics uPD64083 3-Dimensional Y/C
-	  separation video chip. It is used to improve the quality of
-	  the colors of a composite signal.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called upd64083.
-
-comment "Miscelaneous helper chips"
-
-config VIDEO_THS7303
-	tristate "THS7303 Video Amplifier"
-	depends on I2C
-	help
-	  Support for TI THS7303 video amplifier
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ths7303.
-
-config VIDEO_M52790
-	tristate "Mitsubishi M52790 A/V switch"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	 Support for the Mitsubishi M52790 A/V switch.
-
-	 To compile this driver as a module, choose M here: the
-	 module will be called m52790.
-
-endmenu # encoder / decoder chips
+if MEDIA_CAMERA_SUPPORT
 
 config VIDEO_VIVI
 	tristate "Virtual Video Driver"
@@ -877,7 +303,6 @@ source "drivers/media/video/s5p-fimc/Kconfig"
 source "drivers/media/video/s5p-tv/Kconfig"
 
 endif # V4L_PLATFORM_DRIVERS
-endif # VIDEO_CAPTURE_DRIVERS
 
 menuconfig V4L_MEM2MEM_DRIVERS
 	bool "Memory-to-memory multimedia devices"
@@ -955,3 +380,5 @@ config VIDEO_MX2_EMMAPRP
 	    conversion.
 
 endif # V4L_MEM2MEM_DRIVERS
+
+endif # MEDIA_CAMERA_SUPPORT
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index a0c6692..52a04fa 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -2,73 +2,9 @@
 # Makefile for the video capture/playback device drivers.
 #
 
-msp3400-objs	:=	msp3400-driver.o msp3400-kthreads.o
-
 omap2cam-objs	:=	omap24xxcam.o omap24xxcam-dma.o
 
-# Helper modules
-
-obj-$(CONFIG_VIDEO_APTINA_PLL) += aptina-pll.o
-
-# All i2c modules must come first:
-
-obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o
-obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o
-obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o
-obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o
-obj-$(CONFIG_VIDEO_TEA6415C) += tea6415c.o
-obj-$(CONFIG_VIDEO_TEA6420) += tea6420.o
-obj-$(CONFIG_VIDEO_SAA7110) += saa7110.o
-obj-$(CONFIG_VIDEO_SAA711X) += saa7115.o
-obj-$(CONFIG_VIDEO_SAA717X) += saa717x.o
-obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o
-obj-$(CONFIG_VIDEO_SAA7185) += saa7185.o
-obj-$(CONFIG_VIDEO_SAA7191) += saa7191.o
-obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o
-obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o
-obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o
-obj-$(CONFIG_VIDEO_ADV7183) += adv7183.o
-obj-$(CONFIG_VIDEO_ADV7343) += adv7343.o
-obj-$(CONFIG_VIDEO_ADV7393) += adv7393.o
-obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o
-obj-$(CONFIG_VIDEO_VS6624)  += vs6624.o
-obj-$(CONFIG_VIDEO_BT819) += bt819.o
-obj-$(CONFIG_VIDEO_BT856) += bt856.o
-obj-$(CONFIG_VIDEO_BT866) += bt866.o
-obj-$(CONFIG_VIDEO_KS0127) += ks0127.o
-obj-$(CONFIG_VIDEO_THS7303) += ths7303.o
 obj-$(CONFIG_VIDEO_VINO) += indycam.o
-obj-$(CONFIG_VIDEO_TVP5150) += tvp5150.o
-obj-$(CONFIG_VIDEO_TVP514X) += tvp514x.o
-obj-$(CONFIG_VIDEO_TVP7002) += tvp7002.o
-obj-$(CONFIG_VIDEO_MSP3400) += msp3400.o
-obj-$(CONFIG_VIDEO_CS5345) += cs5345.o
-obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o
-obj-$(CONFIG_VIDEO_M52790) += m52790.o
-obj-$(CONFIG_VIDEO_TLV320AIC23B) += tlv320aic23b.o
-obj-$(CONFIG_VIDEO_WM8775) += wm8775.o
-obj-$(CONFIG_VIDEO_WM8739) += wm8739.o
-obj-$(CONFIG_VIDEO_VP27SMPX) += vp27smpx.o
-obj-$(CONFIG_VIDEO_CX25840) += cx25840/
-obj-$(CONFIG_VIDEO_UPD64031A) += upd64031a.o
-obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o
-obj-$(CONFIG_VIDEO_OV7670) 	+= ov7670.o
-obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o
-obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o
-obj-$(CONFIG_VIDEO_MT9M032) += mt9m032.o
-obj-$(CONFIG_VIDEO_MT9P031) += mt9p031.o
-obj-$(CONFIG_VIDEO_MT9T001) += mt9t001.o
-obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o
-obj-$(CONFIG_VIDEO_MT9V032) += mt9v032.o
-obj-$(CONFIG_VIDEO_SR030PC30)	+= sr030pc30.o
-obj-$(CONFIG_VIDEO_NOON010PC30)	+= noon010pc30.o
-obj-$(CONFIG_VIDEO_M5MOLS)	+= m5mols/
-obj-$(CONFIG_VIDEO_S5K6AA)	+= s5k6aa.o
-obj-$(CONFIG_VIDEO_SMIAPP)	+= smiapp/
-obj-$(CONFIG_VIDEO_ADP1653)	+= adp1653.o
-obj-$(CONFIG_VIDEO_AS3645A)	+= as3645a.o
-
-obj-$(CONFIG_VIDEO_SMIAPP_PLL)	+= smiapp-pll.o
 
 obj-$(CONFIG_SOC_CAMERA_IMX074)		+= imx074.o
 obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= mt9m001.o
@@ -85,16 +21,12 @@ obj-$(CONFIG_SOC_CAMERA_OV9740)		+= ov9740.o
 obj-$(CONFIG_SOC_CAMERA_RJ54N1)		+= rj54n1cb0c.o
 obj-$(CONFIG_SOC_CAMERA_TW9910)		+= tw9910.o
 
-# And now the v4l2 drivers:
-
 obj-$(CONFIG_VIDEO_VINO) += vino.o
 obj-$(CONFIG_VIDEO_TIMBERDALE)	+= timblogiw.o
 
-obj-$(CONFIG_VIDEO_BTCX)  += btcx-risc.o
 
 obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o
 
-obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o
 
 obj-$(CONFIG_VIDEO_CAFE_CCIC) += marvell-ccic/
 obj-$(CONFIG_VIDEO_MMP_CAMERA) += marvell-ccic/
@@ -107,7 +39,6 @@ obj-$(CONFIG_VIDEO_VIU) += fsl-viu.o
 obj-$(CONFIG_VIDEO_VIVI) += vivi.o
 obj-$(CONFIG_VIDEO_MEM2MEM_TESTDEV) += mem2mem_testdev.o
 
-obj-$(CONFIG_VIDEO_AK881X)		+= ak881x.o
 
 obj-$(CONFIG_VIDEO_OMAP2)		+= omap2cam.o
 obj-$(CONFIG_SOC_CAMERA)		+= soc_camera.o soc_mediabus.o
@@ -140,8 +71,6 @@ obj-$(CONFIG_ARCH_DAVINCI)		+= davinci/
 
 obj-$(CONFIG_VIDEO_SH_VOU)		+= sh_vou.o
 
-obj-$(CONFIG_VIDEO_IR_I2C)  += ir-kbd-i2c.o
-
 obj-y	+= davinci/
 
 obj-$(CONFIG_ARCH_OMAP)	+= omap/
diff --git a/drivers/media/video/adp1653.c b/drivers/media/video/adp1653.c
deleted file mode 100644
index 57e8709..0000000
--- a/drivers/media/video/adp1653.c
+++ /dev/null
@@ -1,487 +0,0 @@
-/*
- * drivers/media/video/adp1653.c
- *
- * Copyright (C) 2008--2011 Nokia Corporation
- *
- * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
- *
- * Contributors:
- *	Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
- *	Tuukka Toivonen <tuukkat76@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- * TODO:
- * - fault interrupt handling
- * - hardware strobe
- * - power doesn't need to be ON if all lights are off
- *
- */
-
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <media/adp1653.h>
-#include <media/v4l2-device.h>
-
-#define TIMEOUT_MAX		820000
-#define TIMEOUT_STEP		54600
-#define TIMEOUT_MIN		(TIMEOUT_MAX - ADP1653_REG_CONFIG_TMR_SET_MAX \
-				 * TIMEOUT_STEP)
-#define TIMEOUT_US_TO_CODE(t)	((TIMEOUT_MAX + (TIMEOUT_STEP / 2) - (t)) \
-				 / TIMEOUT_STEP)
-#define TIMEOUT_CODE_TO_US(c)	(TIMEOUT_MAX - (c) * TIMEOUT_STEP)
-
-/* Write values into ADP1653 registers. */
-static int adp1653_update_hw(struct adp1653_flash *flash)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
-	u8 out_sel;
-	u8 config = 0;
-	int rval;
-
-	out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG(
-		flash->indicator_intensity->val)
-		<< ADP1653_REG_OUT_SEL_ILED_SHIFT;
-
-	switch (flash->led_mode->val) {
-	case V4L2_FLASH_LED_MODE_NONE:
-		break;
-	case V4L2_FLASH_LED_MODE_FLASH:
-		/* Flash mode, light on with strobe, duration from timer */
-		config = ADP1653_REG_CONFIG_TMR_CFG;
-		config |= TIMEOUT_US_TO_CODE(flash->flash_timeout->val)
-			  << ADP1653_REG_CONFIG_TMR_SET_SHIFT;
-		break;
-	case V4L2_FLASH_LED_MODE_TORCH:
-		/* Torch mode, light immediately on, duration indefinite */
-		out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG(
-			flash->torch_intensity->val)
-			<< ADP1653_REG_OUT_SEL_HPLED_SHIFT;
-		break;
-	}
-
-	rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel);
-	if (rval < 0)
-		return rval;
-
-	rval = i2c_smbus_write_byte_data(client, ADP1653_REG_CONFIG, config);
-	if (rval < 0)
-		return rval;
-
-	return 0;
-}
-
-static int adp1653_get_fault(struct adp1653_flash *flash)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
-	int fault;
-	int rval;
-
-	fault = i2c_smbus_read_byte_data(client, ADP1653_REG_FAULT);
-	if (IS_ERR_VALUE(fault))
-		return fault;
-
-	flash->fault |= fault;
-
-	if (!flash->fault)
-		return 0;
-
-	/* Clear faults. */
-	rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0);
-	if (IS_ERR_VALUE(rval))
-		return rval;
-
-	flash->led_mode->val = V4L2_FLASH_LED_MODE_NONE;
-
-	rval = adp1653_update_hw(flash);
-	if (IS_ERR_VALUE(rval))
-		return rval;
-
-	return flash->fault;
-}
-
-static int adp1653_strobe(struct adp1653_flash *flash, int enable)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
-	u8 out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG(
-		flash->indicator_intensity->val)
-		<< ADP1653_REG_OUT_SEL_ILED_SHIFT;
-	int rval;
-
-	if (flash->led_mode->val != V4L2_FLASH_LED_MODE_FLASH)
-		return -EBUSY;
-
-	if (!enable)
-		return i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL,
-						 out_sel);
-
-	out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG(
-		flash->flash_intensity->val)
-		<< ADP1653_REG_OUT_SEL_HPLED_SHIFT;
-	rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel);
-	if (rval)
-		return rval;
-
-	/* Software strobe using i2c */
-	rval = i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE,
-		ADP1653_REG_SW_STROBE_SW_STROBE);
-	if (rval)
-		return rval;
-	return i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE, 0);
-}
-
-/* --------------------------------------------------------------------------
- * V4L2 controls
- */
-
-static int adp1653_get_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct adp1653_flash *flash =
-		container_of(ctrl->handler, struct adp1653_flash, ctrls);
-	int rval;
-
-	rval = adp1653_get_fault(flash);
-	if (IS_ERR_VALUE(rval))
-		return rval;
-
-	ctrl->cur.val = 0;
-
-	if (flash->fault & ADP1653_REG_FAULT_FLT_SCP)
-		ctrl->cur.val |= V4L2_FLASH_FAULT_SHORT_CIRCUIT;
-	if (flash->fault & ADP1653_REG_FAULT_FLT_OT)
-		ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_TEMPERATURE;
-	if (flash->fault & ADP1653_REG_FAULT_FLT_TMR)
-		ctrl->cur.val |= V4L2_FLASH_FAULT_TIMEOUT;
-	if (flash->fault & ADP1653_REG_FAULT_FLT_OV)
-		ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_VOLTAGE;
-
-	flash->fault = 0;
-
-	return 0;
-}
-
-static int adp1653_set_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct adp1653_flash *flash =
-		container_of(ctrl->handler, struct adp1653_flash, ctrls);
-	int rval;
-
-	rval = adp1653_get_fault(flash);
-	if (IS_ERR_VALUE(rval))
-		return rval;
-	if ((rval & (ADP1653_REG_FAULT_FLT_SCP |
-		     ADP1653_REG_FAULT_FLT_OT |
-		     ADP1653_REG_FAULT_FLT_OV)) &&
-	    (ctrl->id == V4L2_CID_FLASH_STROBE ||
-	     ctrl->id == V4L2_CID_FLASH_TORCH_INTENSITY ||
-	     ctrl->id == V4L2_CID_FLASH_LED_MODE))
-		return -EBUSY;
-
-	switch (ctrl->id) {
-	case V4L2_CID_FLASH_STROBE:
-		return adp1653_strobe(flash, 1);
-	case V4L2_CID_FLASH_STROBE_STOP:
-		return adp1653_strobe(flash, 0);
-	}
-
-	return adp1653_update_hw(flash);
-}
-
-static const struct v4l2_ctrl_ops adp1653_ctrl_ops = {
-	.g_volatile_ctrl = adp1653_get_ctrl,
-	.s_ctrl = adp1653_set_ctrl,
-};
-
-static int adp1653_init_controls(struct adp1653_flash *flash)
-{
-	struct v4l2_ctrl *fault;
-
-	v4l2_ctrl_handler_init(&flash->ctrls, 9);
-
-	flash->led_mode =
-		v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops,
-				       V4L2_CID_FLASH_LED_MODE,
-				       V4L2_FLASH_LED_MODE_TORCH, ~0x7, 0);
-	v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops,
-			       V4L2_CID_FLASH_STROBE_SOURCE,
-			       V4L2_FLASH_STROBE_SOURCE_SOFTWARE, ~0x1, 0);
-	v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
-			  V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
-	v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
-			  V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
-	flash->flash_timeout =
-		v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
-				  V4L2_CID_FLASH_TIMEOUT, TIMEOUT_MIN,
-				  flash->platform_data->max_flash_timeout,
-				  TIMEOUT_STEP,
-				  flash->platform_data->max_flash_timeout);
-	flash->flash_intensity =
-		v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
-				  V4L2_CID_FLASH_INTENSITY,
-				  ADP1653_FLASH_INTENSITY_MIN,
-				  flash->platform_data->max_flash_intensity,
-				  1, flash->platform_data->max_flash_intensity);
-	flash->torch_intensity =
-		v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
-				  V4L2_CID_FLASH_TORCH_INTENSITY,
-				  ADP1653_TORCH_INTENSITY_MIN,
-				  flash->platform_data->max_torch_intensity,
-				  ADP1653_FLASH_INTENSITY_STEP,
-				  flash->platform_data->max_torch_intensity);
-	flash->indicator_intensity =
-		v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
-				  V4L2_CID_FLASH_INDICATOR_INTENSITY,
-				  ADP1653_INDICATOR_INTENSITY_MIN,
-				  flash->platform_data->max_indicator_intensity,
-				  ADP1653_INDICATOR_INTENSITY_STEP,
-				  ADP1653_INDICATOR_INTENSITY_MIN);
-	fault = v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
-				  V4L2_CID_FLASH_FAULT, 0,
-				  V4L2_FLASH_FAULT_OVER_VOLTAGE
-				  | V4L2_FLASH_FAULT_OVER_TEMPERATURE
-				  | V4L2_FLASH_FAULT_SHORT_CIRCUIT, 0, 0);
-
-	if (flash->ctrls.error)
-		return flash->ctrls.error;
-
-	fault->flags |= V4L2_CTRL_FLAG_VOLATILE;
-
-	flash->subdev.ctrl_handler = &flash->ctrls;
-	return 0;
-}
-
-/* --------------------------------------------------------------------------
- * V4L2 subdev operations
- */
-
-static int
-adp1653_init_device(struct adp1653_flash *flash)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
-	int rval;
-
-	/* Clear FAULT register by writing zero to OUT_SEL */
-	rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0);
-	if (rval < 0) {
-		dev_err(&client->dev, "failed writing fault register\n");
-		return -EIO;
-	}
-
-	mutex_lock(flash->ctrls.lock);
-	/* Reset faults before reading new ones. */
-	flash->fault = 0;
-	rval = adp1653_get_fault(flash);
-	mutex_unlock(flash->ctrls.lock);
-	if (rval > 0) {
-		dev_err(&client->dev, "faults detected: 0x%1.1x\n", rval);
-		return -EIO;
-	}
-
-	mutex_lock(flash->ctrls.lock);
-	rval = adp1653_update_hw(flash);
-	mutex_unlock(flash->ctrls.lock);
-	if (rval) {
-		dev_err(&client->dev,
-			"adp1653_update_hw failed at %s\n", __func__);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static int
-__adp1653_set_power(struct adp1653_flash *flash, int on)
-{
-	int ret;
-
-	ret = flash->platform_data->power(&flash->subdev, on);
-	if (ret < 0)
-		return ret;
-
-	if (!on)
-		return 0;
-
-	ret = adp1653_init_device(flash);
-	if (ret < 0)
-		flash->platform_data->power(&flash->subdev, 0);
-
-	return ret;
-}
-
-static int
-adp1653_set_power(struct v4l2_subdev *subdev, int on)
-{
-	struct adp1653_flash *flash = to_adp1653_flash(subdev);
-	int ret = 0;
-
-	mutex_lock(&flash->power_lock);
-
-	/* If the power count is modified from 0 to != 0 or from != 0 to 0,
-	 * update the power state.
-	 */
-	if (flash->power_count == !on) {
-		ret = __adp1653_set_power(flash, !!on);
-		if (ret < 0)
-			goto done;
-	}
-
-	/* Update the power count. */
-	flash->power_count += on ? 1 : -1;
-	WARN_ON(flash->power_count < 0);
-
-done:
-	mutex_unlock(&flash->power_lock);
-	return ret;
-}
-
-static int adp1653_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-{
-	return adp1653_set_power(sd, 1);
-}
-
-static int adp1653_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-{
-	return adp1653_set_power(sd, 0);
-}
-
-static const struct v4l2_subdev_core_ops adp1653_core_ops = {
-	.s_power = adp1653_set_power,
-};
-
-static const struct v4l2_subdev_ops adp1653_ops = {
-	.core = &adp1653_core_ops,
-};
-
-static const struct v4l2_subdev_internal_ops adp1653_internal_ops = {
-	.open = adp1653_open,
-	.close = adp1653_close,
-};
-
-/* --------------------------------------------------------------------------
- * I2C driver
- */
-#ifdef CONFIG_PM
-
-static int adp1653_suspend(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
-	struct adp1653_flash *flash = to_adp1653_flash(subdev);
-
-	if (!flash->power_count)
-		return 0;
-
-	return __adp1653_set_power(flash, 0);
-}
-
-static int adp1653_resume(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
-	struct adp1653_flash *flash = to_adp1653_flash(subdev);
-
-	if (!flash->power_count)
-		return 0;
-
-	return __adp1653_set_power(flash, 1);
-}
-
-#else
-
-#define adp1653_suspend	NULL
-#define adp1653_resume	NULL
-
-#endif /* CONFIG_PM */
-
-static int adp1653_probe(struct i2c_client *client,
-			 const struct i2c_device_id *devid)
-{
-	struct adp1653_flash *flash;
-	int ret;
-
-	/* we couldn't work without platform data */
-	if (client->dev.platform_data == NULL)
-		return -ENODEV;
-
-	flash = kzalloc(sizeof(*flash), GFP_KERNEL);
-	if (flash == NULL)
-		return -ENOMEM;
-
-	flash->platform_data = client->dev.platform_data;
-
-	mutex_init(&flash->power_lock);
-
-	v4l2_i2c_subdev_init(&flash->subdev, client, &adp1653_ops);
-	flash->subdev.internal_ops = &adp1653_internal_ops;
-	flash->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
-
-	ret = adp1653_init_controls(flash);
-	if (ret)
-		goto free_and_quit;
-
-	ret = media_entity_init(&flash->subdev.entity, 0, NULL, 0);
-	if (ret < 0)
-		goto free_and_quit;
-
-	flash->subdev.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH;
-
-	return 0;
-
-free_and_quit:
-	v4l2_ctrl_handler_free(&flash->ctrls);
-	kfree(flash);
-	return ret;
-}
-
-static int __exit adp1653_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
-	struct adp1653_flash *flash = to_adp1653_flash(subdev);
-
-	v4l2_device_unregister_subdev(&flash->subdev);
-	v4l2_ctrl_handler_free(&flash->ctrls);
-	media_entity_cleanup(&flash->subdev.entity);
-	kfree(flash);
-	return 0;
-}
-
-static const struct i2c_device_id adp1653_id_table[] = {
-	{ ADP1653_NAME, 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, adp1653_id_table);
-
-static struct dev_pm_ops adp1653_pm_ops = {
-	.suspend	= adp1653_suspend,
-	.resume		= adp1653_resume,
-};
-
-static struct i2c_driver adp1653_i2c_driver = {
-	.driver		= {
-		.name	= ADP1653_NAME,
-		.pm	= &adp1653_pm_ops,
-	},
-	.probe		= adp1653_probe,
-	.remove		= __exit_p(adp1653_remove),
-	.id_table	= adp1653_id_table,
-};
-
-module_i2c_driver(adp1653_i2c_driver);
-
-MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>");
-MODULE_DESCRIPTION("Analog Devices ADP1653 LED flash driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/adv7170.c b/drivers/media/video/adv7170.c
deleted file mode 100644
index 6bc01fb..0000000
--- a/drivers/media/video/adv7170.c
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * adv7170 - adv7170, adv7171 video encoder driver version 0.0.1
- *
- * Copyright (C) 2002 Maxim Yevtyushkin <max@linuxmedialabs.com>
- *
- * Based on adv7176 driver by:
- *
- * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
- * Copyright (C) 1999 Wolfgang Scherr <scherr@net4you.net>
- * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
- *    - some corrections for Pinnacle Systems Inc. DC10plus card.
- *
- * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net>
- *    - moved over to linux>=2.4.x i2c protocol (1/1/2003)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/ioctl.h>
-#include <asm/uaccess.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-
-MODULE_DESCRIPTION("Analog Devices ADV7170 video encoder driver");
-MODULE_AUTHOR("Maxim Yevtyushkin");
-MODULE_LICENSE("GPL");
-
-
-static int debug;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
-
-/* ----------------------------------------------------------------------- */
-
-struct adv7170 {
-	struct v4l2_subdev sd;
-	unsigned char reg[128];
-
-	v4l2_std_id norm;
-	int input;
-};
-
-static inline struct adv7170 *to_adv7170(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct adv7170, sd);
-}
-
-static char *inputs[] = { "pass_through", "play_back" };
-
-static enum v4l2_mbus_pixelcode adv7170_codes[] = {
-	V4L2_MBUS_FMT_UYVY8_2X8,
-	V4L2_MBUS_FMT_UYVY8_1X16,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static inline int adv7170_write(struct v4l2_subdev *sd, u8 reg, u8 value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct adv7170 *encoder = to_adv7170(sd);
-
-	encoder->reg[reg] = value;
-	return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-static inline int adv7170_read(struct v4l2_subdev *sd, u8 reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int adv7170_write_block(struct v4l2_subdev *sd,
-		     const u8 *data, unsigned int len)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct adv7170 *encoder = to_adv7170(sd);
-	int ret = -1;
-	u8 reg;
-
-	/* the adv7170 has an autoincrement function, use it if
-	 * the adapter understands raw I2C */
-	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
-		/* do raw I2C, not smbus compatible */
-		u8 block_data[32];
-		int block_len;
-
-		while (len >= 2) {
-			block_len = 0;
-			block_data[block_len++] = reg = data[0];
-			do {
-				block_data[block_len++] =
-				    encoder->reg[reg++] = data[1];
-				len -= 2;
-				data += 2;
-			} while (len >= 2 && data[0] == reg && block_len < 32);
-			ret = i2c_master_send(client, block_data, block_len);
-			if (ret < 0)
-				break;
-		}
-	} else {
-		/* do some slow I2C emulation kind of thing */
-		while (len >= 2) {
-			reg = *data++;
-			ret = adv7170_write(sd, reg, *data++);
-			if (ret < 0)
-				break;
-			len -= 2;
-		}
-	}
-	return ret;
-}
-
-/* ----------------------------------------------------------------------- */
-
-#define TR0MODE     0x4c
-#define TR0RST	    0x80
-
-#define TR1CAPT	    0x00
-#define TR1PLAY	    0x00
-
-static const unsigned char init_NTSC[] = {
-	0x00, 0x10,		/* MR0 */
-	0x01, 0x20,		/* MR1 */
-	0x02, 0x0e,		/* MR2 RTC control: bits 2 and 1 */
-	0x03, 0x80,		/* MR3 */
-	0x04, 0x30,		/* MR4 */
-	0x05, 0x00,		/* Reserved */
-	0x06, 0x00,		/* Reserved */
-	0x07, TR0MODE,		/* TM0 */
-	0x08, TR1CAPT,		/* TM1 */
-	0x09, 0x16,		/* Fsc0 */
-	0x0a, 0x7c,		/* Fsc1 */
-	0x0b, 0xf0,		/* Fsc2 */
-	0x0c, 0x21,		/* Fsc3 */
-	0x0d, 0x00,		/* Subcarrier Phase */
-	0x0e, 0x00,		/* Closed Capt. Ext 0 */
-	0x0f, 0x00,		/* Closed Capt. Ext 1 */
-	0x10, 0x00,		/* Closed Capt. 0 */
-	0x11, 0x00,		/* Closed Capt. 1 */
-	0x12, 0x00,		/* Pedestal Ctl 0 */
-	0x13, 0x00,		/* Pedestal Ctl 1 */
-	0x14, 0x00,		/* Pedestal Ctl 2 */
-	0x15, 0x00,		/* Pedestal Ctl 3 */
-	0x16, 0x00,		/* CGMS_WSS_0 */
-	0x17, 0x00,		/* CGMS_WSS_1 */
-	0x18, 0x00,		/* CGMS_WSS_2 */
-	0x19, 0x00,		/* Teletext Ctl */
-};
-
-static const unsigned char init_PAL[] = {
-	0x00, 0x71,		/* MR0 */
-	0x01, 0x20,		/* MR1 */
-	0x02, 0x0e,		/* MR2 RTC control: bits 2 and 1 */
-	0x03, 0x80,		/* MR3 */
-	0x04, 0x30,		/* MR4 */
-	0x05, 0x00,		/* Reserved */
-	0x06, 0x00,		/* Reserved */
-	0x07, TR0MODE,		/* TM0 */
-	0x08, TR1CAPT,		/* TM1 */
-	0x09, 0xcb,		/* Fsc0 */
-	0x0a, 0x8a,		/* Fsc1 */
-	0x0b, 0x09,		/* Fsc2 */
-	0x0c, 0x2a,		/* Fsc3 */
-	0x0d, 0x00,		/* Subcarrier Phase */
-	0x0e, 0x00,		/* Closed Capt. Ext 0 */
-	0x0f, 0x00,		/* Closed Capt. Ext 1 */
-	0x10, 0x00,		/* Closed Capt. 0 */
-	0x11, 0x00,		/* Closed Capt. 1 */
-	0x12, 0x00,		/* Pedestal Ctl 0 */
-	0x13, 0x00,		/* Pedestal Ctl 1 */
-	0x14, 0x00,		/* Pedestal Ctl 2 */
-	0x15, 0x00,		/* Pedestal Ctl 3 */
-	0x16, 0x00,		/* CGMS_WSS_0 */
-	0x17, 0x00,		/* CGMS_WSS_1 */
-	0x18, 0x00,		/* CGMS_WSS_2 */
-	0x19, 0x00,		/* Teletext Ctl */
-};
-
-
-static int adv7170_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct adv7170 *encoder = to_adv7170(sd);
-
-	v4l2_dbg(1, debug, sd, "set norm %llx\n", (unsigned long long)std);
-
-	if (std & V4L2_STD_NTSC) {
-		adv7170_write_block(sd, init_NTSC, sizeof(init_NTSC));
-		if (encoder->input == 0)
-			adv7170_write(sd, 0x02, 0x0e);	/* Enable genlock */
-		adv7170_write(sd, 0x07, TR0MODE | TR0RST);
-		adv7170_write(sd, 0x07, TR0MODE);
-	} else if (std & V4L2_STD_PAL) {
-		adv7170_write_block(sd, init_PAL, sizeof(init_PAL));
-		if (encoder->input == 0)
-			adv7170_write(sd, 0x02, 0x0e);	/* Enable genlock */
-		adv7170_write(sd, 0x07, TR0MODE | TR0RST);
-		adv7170_write(sd, 0x07, TR0MODE);
-	} else {
-		v4l2_dbg(1, debug, sd, "illegal norm: %llx\n",
-				(unsigned long long)std);
-		return -EINVAL;
-	}
-	v4l2_dbg(1, debug, sd, "switched to %llx\n", (unsigned long long)std);
-	encoder->norm = std;
-	return 0;
-}
-
-static int adv7170_s_routing(struct v4l2_subdev *sd,
-			     u32 input, u32 output, u32 config)
-{
-	struct adv7170 *encoder = to_adv7170(sd);
-
-	/* RJ: input = 0: input is from decoder
-	   input = 1: input is from ZR36060
-	   input = 2: color bar */
-
-	v4l2_dbg(1, debug, sd, "set input from %s\n",
-			input == 0 ? "decoder" : "ZR36060");
-
-	switch (input) {
-	case 0:
-		adv7170_write(sd, 0x01, 0x20);
-		adv7170_write(sd, 0x08, TR1CAPT);	/* TR1 */
-		adv7170_write(sd, 0x02, 0x0e);	/* Enable genlock */
-		adv7170_write(sd, 0x07, TR0MODE | TR0RST);
-		adv7170_write(sd, 0x07, TR0MODE);
-		/* udelay(10); */
-		break;
-
-	case 1:
-		adv7170_write(sd, 0x01, 0x00);
-		adv7170_write(sd, 0x08, TR1PLAY);	/* TR1 */
-		adv7170_write(sd, 0x02, 0x08);
-		adv7170_write(sd, 0x07, TR0MODE | TR0RST);
-		adv7170_write(sd, 0x07, TR0MODE);
-		/* udelay(10); */
-		break;
-
-	default:
-		v4l2_dbg(1, debug, sd, "illegal input: %d\n", input);
-		return -EINVAL;
-	}
-	v4l2_dbg(1, debug, sd, "switched to %s\n", inputs[input]);
-	encoder->input = input;
-	return 0;
-}
-
-static int adv7170_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
-				enum v4l2_mbus_pixelcode *code)
-{
-	if (index >= ARRAY_SIZE(adv7170_codes))
-		return -EINVAL;
-
-	*code = adv7170_codes[index];
-	return 0;
-}
-
-static int adv7170_g_fmt(struct v4l2_subdev *sd,
-				struct v4l2_mbus_framefmt *mf)
-{
-	u8 val = adv7170_read(sd, 0x7);
-
-	if ((val & 0x40) == (1 << 6))
-		mf->code = V4L2_MBUS_FMT_UYVY8_1X16;
-	else
-		mf->code = V4L2_MBUS_FMT_UYVY8_2X8;
-
-	mf->colorspace  = V4L2_COLORSPACE_SMPTE170M;
-	mf->width       = 0;
-	mf->height      = 0;
-	mf->field       = V4L2_FIELD_ANY;
-
-	return 0;
-}
-
-static int adv7170_s_fmt(struct v4l2_subdev *sd,
-				struct v4l2_mbus_framefmt *mf)
-{
-	u8 val = adv7170_read(sd, 0x7);
-	int ret;
-
-	switch (mf->code) {
-	case V4L2_MBUS_FMT_UYVY8_2X8:
-		val &= ~0x40;
-		break;
-
-	case V4L2_MBUS_FMT_UYVY8_1X16:
-		val |= 0x40;
-		break;
-
-	default:
-		v4l2_dbg(1, debug, sd,
-			"illegal v4l2_mbus_framefmt code: %d\n", mf->code);
-		return -EINVAL;
-	}
-
-	ret = adv7170_write(sd, 0x7, val);
-
-	return ret;
-}
-
-static int adv7170_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7170, 0);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops adv7170_core_ops = {
-	.g_chip_ident = adv7170_g_chip_ident,
-};
-
-static const struct v4l2_subdev_video_ops adv7170_video_ops = {
-	.s_std_output = adv7170_s_std_output,
-	.s_routing = adv7170_s_routing,
-	.s_mbus_fmt = adv7170_s_fmt,
-	.g_mbus_fmt = adv7170_g_fmt,
-	.enum_mbus_fmt  = adv7170_enum_fmt,
-};
-
-static const struct v4l2_subdev_ops adv7170_ops = {
-	.core = &adv7170_core_ops,
-	.video = &adv7170_video_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static int adv7170_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	struct adv7170 *encoder;
-	struct v4l2_subdev *sd;
-	int i;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -ENODEV;
-
-	v4l_info(client, "chip found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	encoder = kzalloc(sizeof(struct adv7170), GFP_KERNEL);
-	if (encoder == NULL)
-		return -ENOMEM;
-	sd = &encoder->sd;
-	v4l2_i2c_subdev_init(sd, client, &adv7170_ops);
-	encoder->norm = V4L2_STD_NTSC;
-	encoder->input = 0;
-
-	i = adv7170_write_block(sd, init_NTSC, sizeof(init_NTSC));
-	if (i >= 0) {
-		i = adv7170_write(sd, 0x07, TR0MODE | TR0RST);
-		i = adv7170_write(sd, 0x07, TR0MODE);
-		i = adv7170_read(sd, 0x12);
-		v4l2_dbg(1, debug, sd, "revision %d\n", i & 1);
-	}
-	if (i < 0)
-		v4l2_dbg(1, debug, sd, "init error 0x%x\n", i);
-	return 0;
-}
-
-static int adv7170_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-
-	v4l2_device_unregister_subdev(sd);
-	kfree(to_adv7170(sd));
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct i2c_device_id adv7170_id[] = {
-	{ "adv7170", 0 },
-	{ "adv7171", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, adv7170_id);
-
-static struct i2c_driver adv7170_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "adv7170",
-	},
-	.probe		= adv7170_probe,
-	.remove		= adv7170_remove,
-	.id_table	= adv7170_id,
-};
-
-module_i2c_driver(adv7170_driver);
diff --git a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c
deleted file mode 100644
index c7640fa..0000000
--- a/drivers/media/video/adv7175.c
+++ /dev/null
@@ -1,460 +0,0 @@
-/*
- *  adv7175 - adv7175a video encoder driver version 0.0.3
- *
- * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
- * Copyright (C) 1999 Wolfgang Scherr <scherr@net4you.net>
- * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
- *    - some corrections for Pinnacle Systems Inc. DC10plus card.
- *
- * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net>
- *    - moved over to linux>=2.4.x i2c protocol (9/9/2002)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/ioctl.h>
-#include <asm/uaccess.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-
-MODULE_DESCRIPTION("Analog Devices ADV7175 video encoder driver");
-MODULE_AUTHOR("Dave Perks");
-MODULE_LICENSE("GPL");
-
-#define   I2C_ADV7175        0xd4
-#define   I2C_ADV7176        0x54
-
-
-static int debug;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
-
-/* ----------------------------------------------------------------------- */
-
-struct adv7175 {
-	struct v4l2_subdev sd;
-	v4l2_std_id norm;
-	int input;
-};
-
-static inline struct adv7175 *to_adv7175(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct adv7175, sd);
-}
-
-static char *inputs[] = { "pass_through", "play_back", "color_bar" };
-
-static enum v4l2_mbus_pixelcode adv7175_codes[] = {
-	V4L2_MBUS_FMT_UYVY8_2X8,
-	V4L2_MBUS_FMT_UYVY8_1X16,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static inline int adv7175_write(struct v4l2_subdev *sd, u8 reg, u8 value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-static inline int adv7175_read(struct v4l2_subdev *sd, u8 reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int adv7175_write_block(struct v4l2_subdev *sd,
-		     const u8 *data, unsigned int len)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	int ret = -1;
-	u8 reg;
-
-	/* the adv7175 has an autoincrement function, use it if
-	 * the adapter understands raw I2C */
-	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
-		/* do raw I2C, not smbus compatible */
-		u8 block_data[32];
-		int block_len;
-
-		while (len >= 2) {
-			block_len = 0;
-			block_data[block_len++] = reg = data[0];
-			do {
-				block_data[block_len++] = data[1];
-				reg++;
-				len -= 2;
-				data += 2;
-			} while (len >= 2 && data[0] == reg && block_len < 32);
-			ret = i2c_master_send(client, block_data, block_len);
-			if (ret < 0)
-				break;
-		}
-	} else {
-		/* do some slow I2C emulation kind of thing */
-		while (len >= 2) {
-			reg = *data++;
-			ret = adv7175_write(sd, reg, *data++);
-			if (ret < 0)
-				break;
-			len -= 2;
-		}
-	}
-
-	return ret;
-}
-
-static void set_subcarrier_freq(struct v4l2_subdev *sd, int pass_through)
-{
-	/* for some reason pass_through NTSC needs
-	 * a different sub-carrier freq to remain stable. */
-	if (pass_through)
-		adv7175_write(sd, 0x02, 0x00);
-	else
-		adv7175_write(sd, 0x02, 0x55);
-
-	adv7175_write(sd, 0x03, 0x55);
-	adv7175_write(sd, 0x04, 0x55);
-	adv7175_write(sd, 0x05, 0x25);
-}
-
-/* ----------------------------------------------------------------------- */
-/* Output filter:  S-Video  Composite */
-
-#define MR050       0x11	/* 0x09 */
-#define MR060       0x14	/* 0x0c */
-
-/* ----------------------------------------------------------------------- */
-
-#define TR0MODE     0x46
-#define TR0RST	    0x80
-
-#define TR1CAPT	    0x80
-#define TR1PLAY	    0x00
-
-static const unsigned char init_common[] = {
-
-	0x00, MR050,		/* MR0, PAL enabled */
-	0x01, 0x00,		/* MR1 */
-	0x02, 0x0c,		/* subc. freq. */
-	0x03, 0x8c,		/* subc. freq. */
-	0x04, 0x79,		/* subc. freq. */
-	0x05, 0x26,		/* subc. freq. */
-	0x06, 0x40,		/* subc. phase */
-
-	0x07, TR0MODE,		/* TR0, 16bit */
-	0x08, 0x21,		/*  */
-	0x09, 0x00,		/*  */
-	0x0a, 0x00,		/*  */
-	0x0b, 0x00,		/*  */
-	0x0c, TR1CAPT,		/* TR1 */
-	0x0d, 0x4f,		/* MR2 */
-	0x0e, 0x00,		/*  */
-	0x0f, 0x00,		/*  */
-	0x10, 0x00,		/*  */
-	0x11, 0x00,		/*  */
-};
-
-static const unsigned char init_pal[] = {
-	0x00, MR050,		/* MR0, PAL enabled */
-	0x01, 0x00,		/* MR1 */
-	0x02, 0x0c,		/* subc. freq. */
-	0x03, 0x8c,		/* subc. freq. */
-	0x04, 0x79,		/* subc. freq. */
-	0x05, 0x26,		/* subc. freq. */
-	0x06, 0x40,		/* subc. phase */
-};
-
-static const unsigned char init_ntsc[] = {
-	0x00, MR060,		/* MR0, NTSC enabled */
-	0x01, 0x00,		/* MR1 */
-	0x02, 0x55,		/* subc. freq. */
-	0x03, 0x55,		/* subc. freq. */
-	0x04, 0x55,		/* subc. freq. */
-	0x05, 0x25,		/* subc. freq. */
-	0x06, 0x1a,		/* subc. phase */
-};
-
-static int adv7175_init(struct v4l2_subdev *sd, u32 val)
-{
-	/* This is just for testing!!! */
-	adv7175_write_block(sd, init_common, sizeof(init_common));
-	adv7175_write(sd, 0x07, TR0MODE | TR0RST);
-	adv7175_write(sd, 0x07, TR0MODE);
-	return 0;
-}
-
-static int adv7175_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct adv7175 *encoder = to_adv7175(sd);
-
-	if (std & V4L2_STD_NTSC) {
-		adv7175_write_block(sd, init_ntsc, sizeof(init_ntsc));
-		if (encoder->input == 0)
-			adv7175_write(sd, 0x0d, 0x4f);	/* Enable genlock */
-		adv7175_write(sd, 0x07, TR0MODE | TR0RST);
-		adv7175_write(sd, 0x07, TR0MODE);
-	} else if (std & V4L2_STD_PAL) {
-		adv7175_write_block(sd, init_pal, sizeof(init_pal));
-		if (encoder->input == 0)
-			adv7175_write(sd, 0x0d, 0x4f);	/* Enable genlock */
-		adv7175_write(sd, 0x07, TR0MODE | TR0RST);
-		adv7175_write(sd, 0x07, TR0MODE);
-	} else if (std & V4L2_STD_SECAM) {
-		/* This is an attempt to convert
-		 * SECAM->PAL (typically it does not work
-		 * due to genlock: when decoder is in SECAM
-		 * and encoder in in PAL the subcarrier can
-		 * not be syncronized with horizontal
-		 * quency) */
-		adv7175_write_block(sd, init_pal, sizeof(init_pal));
-		if (encoder->input == 0)
-			adv7175_write(sd, 0x0d, 0x49);	/* Disable genlock */
-		adv7175_write(sd, 0x07, TR0MODE | TR0RST);
-		adv7175_write(sd, 0x07, TR0MODE);
-	} else {
-		v4l2_dbg(1, debug, sd, "illegal norm: %llx\n",
-				(unsigned long long)std);
-		return -EINVAL;
-	}
-	v4l2_dbg(1, debug, sd, "switched to %llx\n", (unsigned long long)std);
-	encoder->norm = std;
-	return 0;
-}
-
-static int adv7175_s_routing(struct v4l2_subdev *sd,
-			     u32 input, u32 output, u32 config)
-{
-	struct adv7175 *encoder = to_adv7175(sd);
-
-	/* RJ: input = 0: input is from decoder
-	   input = 1: input is from ZR36060
-	   input = 2: color bar */
-
-	switch (input) {
-	case 0:
-		adv7175_write(sd, 0x01, 0x00);
-
-		if (encoder->norm & V4L2_STD_NTSC)
-			set_subcarrier_freq(sd, 1);
-
-		adv7175_write(sd, 0x0c, TR1CAPT);	/* TR1 */
-		if (encoder->norm & V4L2_STD_SECAM)
-			adv7175_write(sd, 0x0d, 0x49);	/* Disable genlock */
-		else
-			adv7175_write(sd, 0x0d, 0x4f);	/* Enable genlock */
-		adv7175_write(sd, 0x07, TR0MODE | TR0RST);
-		adv7175_write(sd, 0x07, TR0MODE);
-		/*udelay(10);*/
-		break;
-
-	case 1:
-		adv7175_write(sd, 0x01, 0x00);
-
-		if (encoder->norm & V4L2_STD_NTSC)
-			set_subcarrier_freq(sd, 0);
-
-		adv7175_write(sd, 0x0c, TR1PLAY);	/* TR1 */
-		adv7175_write(sd, 0x0d, 0x49);
-		adv7175_write(sd, 0x07, TR0MODE | TR0RST);
-		adv7175_write(sd, 0x07, TR0MODE);
-		/* udelay(10); */
-		break;
-
-	case 2:
-		adv7175_write(sd, 0x01, 0x80);
-
-		if (encoder->norm & V4L2_STD_NTSC)
-			set_subcarrier_freq(sd, 0);
-
-		adv7175_write(sd, 0x0d, 0x49);
-		adv7175_write(sd, 0x07, TR0MODE | TR0RST);
-		adv7175_write(sd, 0x07, TR0MODE);
-		/* udelay(10); */
-		break;
-
-	default:
-		v4l2_dbg(1, debug, sd, "illegal input: %d\n", input);
-		return -EINVAL;
-	}
-	v4l2_dbg(1, debug, sd, "switched to %s\n", inputs[input]);
-	encoder->input = input;
-	return 0;
-}
-
-static int adv7175_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
-				enum v4l2_mbus_pixelcode *code)
-{
-	if (index >= ARRAY_SIZE(adv7175_codes))
-		return -EINVAL;
-
-	*code = adv7175_codes[index];
-	return 0;
-}
-
-static int adv7175_g_fmt(struct v4l2_subdev *sd,
-				struct v4l2_mbus_framefmt *mf)
-{
-	u8 val = adv7175_read(sd, 0x7);
-
-	if ((val & 0x40) == (1 << 6))
-		mf->code = V4L2_MBUS_FMT_UYVY8_1X16;
-	else
-		mf->code = V4L2_MBUS_FMT_UYVY8_2X8;
-
-	mf->colorspace  = V4L2_COLORSPACE_SMPTE170M;
-	mf->width       = 0;
-	mf->height      = 0;
-	mf->field       = V4L2_FIELD_ANY;
-
-	return 0;
-}
-
-static int adv7175_s_fmt(struct v4l2_subdev *sd,
-				struct v4l2_mbus_framefmt *mf)
-{
-	u8 val = adv7175_read(sd, 0x7);
-	int ret;
-
-	switch (mf->code) {
-	case V4L2_MBUS_FMT_UYVY8_2X8:
-		val &= ~0x40;
-		break;
-
-	case V4L2_MBUS_FMT_UYVY8_1X16:
-		val |= 0x40;
-		break;
-
-	default:
-		v4l2_dbg(1, debug, sd,
-			"illegal v4l2_mbus_framefmt code: %d\n", mf->code);
-		return -EINVAL;
-	}
-
-	ret = adv7175_write(sd, 0x7, val);
-
-	return ret;
-}
-
-static int adv7175_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7175, 0);
-}
-
-static int adv7175_s_power(struct v4l2_subdev *sd, int on)
-{
-	if (on)
-		adv7175_write(sd, 0x01, 0x00);
-	else
-		adv7175_write(sd, 0x01, 0x78);
-
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops adv7175_core_ops = {
-	.g_chip_ident = adv7175_g_chip_ident,
-	.init = adv7175_init,
-	.s_power = adv7175_s_power,
-};
-
-static const struct v4l2_subdev_video_ops adv7175_video_ops = {
-	.s_std_output = adv7175_s_std_output,
-	.s_routing = adv7175_s_routing,
-	.s_mbus_fmt = adv7175_s_fmt,
-	.g_mbus_fmt = adv7175_g_fmt,
-	.enum_mbus_fmt  = adv7175_enum_fmt,
-};
-
-static const struct v4l2_subdev_ops adv7175_ops = {
-	.core = &adv7175_core_ops,
-	.video = &adv7175_video_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static int adv7175_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	int i;
-	struct adv7175 *encoder;
-	struct v4l2_subdev *sd;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -ENODEV;
-
-	v4l_info(client, "chip found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	encoder = kzalloc(sizeof(struct adv7175), GFP_KERNEL);
-	if (encoder == NULL)
-		return -ENOMEM;
-	sd = &encoder->sd;
-	v4l2_i2c_subdev_init(sd, client, &adv7175_ops);
-	encoder->norm = V4L2_STD_NTSC;
-	encoder->input = 0;
-
-	i = adv7175_write_block(sd, init_common, sizeof(init_common));
-	if (i >= 0) {
-		i = adv7175_write(sd, 0x07, TR0MODE | TR0RST);
-		i = adv7175_write(sd, 0x07, TR0MODE);
-		i = adv7175_read(sd, 0x12);
-		v4l2_dbg(1, debug, sd, "revision %d\n", i & 1);
-	}
-	if (i < 0)
-		v4l2_dbg(1, debug, sd, "init error 0x%x\n", i);
-	return 0;
-}
-
-static int adv7175_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-
-	v4l2_device_unregister_subdev(sd);
-	kfree(to_adv7175(sd));
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct i2c_device_id adv7175_id[] = {
-	{ "adv7175", 0 },
-	{ "adv7176", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, adv7175_id);
-
-static struct i2c_driver adv7175_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "adv7175",
-	},
-	.probe		= adv7175_probe,
-	.remove		= adv7175_remove,
-	.id_table	= adv7175_id,
-};
-
-module_i2c_driver(adv7175_driver);
diff --git a/drivers/media/video/adv7180.c b/drivers/media/video/adv7180.c
deleted file mode 100644
index 45ecf8d..0000000
--- a/drivers/media/video/adv7180.c
+++ /dev/null
@@ -1,667 +0,0 @@
-/*
- * adv7180.c Analog Devices ADV7180 video decoder driver
- * Copyright (c) 2009 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <media/v4l2-ioctl.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-chip-ident.h>
-#include <linux/mutex.h>
-
-#define ADV7180_INPUT_CONTROL_REG			0x00
-#define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM	0x00
-#define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM_PED 0x10
-#define ADV7180_INPUT_CONTROL_AD_PAL_N_NTSC_J_SECAM	0x20
-#define ADV7180_INPUT_CONTROL_AD_PAL_N_NTSC_M_SECAM	0x30
-#define ADV7180_INPUT_CONTROL_NTSC_J			0x40
-#define ADV7180_INPUT_CONTROL_NTSC_M			0x50
-#define ADV7180_INPUT_CONTROL_PAL60			0x60
-#define ADV7180_INPUT_CONTROL_NTSC_443			0x70
-#define ADV7180_INPUT_CONTROL_PAL_BG			0x80
-#define ADV7180_INPUT_CONTROL_PAL_N			0x90
-#define ADV7180_INPUT_CONTROL_PAL_M			0xa0
-#define ADV7180_INPUT_CONTROL_PAL_M_PED			0xb0
-#define ADV7180_INPUT_CONTROL_PAL_COMB_N		0xc0
-#define ADV7180_INPUT_CONTROL_PAL_COMB_N_PED		0xd0
-#define ADV7180_INPUT_CONTROL_PAL_SECAM			0xe0
-#define ADV7180_INPUT_CONTROL_PAL_SECAM_PED		0xf0
-#define ADV7180_INPUT_CONTROL_INSEL_MASK		0x0f
-
-#define ADV7180_EXTENDED_OUTPUT_CONTROL_REG		0x04
-#define ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS		0xC5
-
-#define ADV7180_AUTODETECT_ENABLE_REG			0x07
-#define ADV7180_AUTODETECT_DEFAULT			0x7f
-/* Contrast */
-#define ADV7180_CON_REG		0x08	/*Unsigned */
-#define ADV7180_CON_MIN		0
-#define ADV7180_CON_DEF		128
-#define ADV7180_CON_MAX		255
-/* Brightness*/
-#define ADV7180_BRI_REG		0x0a	/*Signed */
-#define ADV7180_BRI_MIN		-128
-#define ADV7180_BRI_DEF		0
-#define ADV7180_BRI_MAX		127
-/* Hue */
-#define ADV7180_HUE_REG		0x0b	/*Signed, inverted */
-#define ADV7180_HUE_MIN		-127
-#define ADV7180_HUE_DEF		0
-#define ADV7180_HUE_MAX		128
-
-#define ADV7180_ADI_CTRL_REG				0x0e
-#define ADV7180_ADI_CTRL_IRQ_SPACE			0x20
-
-#define ADV7180_PWR_MAN_REG		0x0f
-#define ADV7180_PWR_MAN_ON		0x04
-#define ADV7180_PWR_MAN_OFF		0x24
-#define ADV7180_PWR_MAN_RES		0x80
-
-#define ADV7180_STATUS1_REG				0x10
-#define ADV7180_STATUS1_IN_LOCK		0x01
-#define ADV7180_STATUS1_AUTOD_MASK	0x70
-#define ADV7180_STATUS1_AUTOD_NTSM_M_J	0x00
-#define ADV7180_STATUS1_AUTOD_NTSC_4_43 0x10
-#define ADV7180_STATUS1_AUTOD_PAL_M	0x20
-#define ADV7180_STATUS1_AUTOD_PAL_60	0x30
-#define ADV7180_STATUS1_AUTOD_PAL_B_G	0x40
-#define ADV7180_STATUS1_AUTOD_SECAM	0x50
-#define ADV7180_STATUS1_AUTOD_PAL_COMB	0x60
-#define ADV7180_STATUS1_AUTOD_SECAM_525	0x70
-
-#define ADV7180_IDENT_REG 0x11
-#define ADV7180_ID_7180 0x18
-
-#define ADV7180_ICONF1_ADI		0x40
-#define ADV7180_ICONF1_ACTIVE_LOW	0x01
-#define ADV7180_ICONF1_PSYNC_ONLY	0x10
-#define ADV7180_ICONF1_ACTIVE_TO_CLR	0xC0
-/* Saturation */
-#define ADV7180_SD_SAT_CB_REG	0xe3	/*Unsigned */
-#define ADV7180_SD_SAT_CR_REG	0xe4	/*Unsigned */
-#define ADV7180_SAT_MIN		0
-#define ADV7180_SAT_DEF		128
-#define ADV7180_SAT_MAX		255
-
-#define ADV7180_IRQ1_LOCK	0x01
-#define ADV7180_IRQ1_UNLOCK	0x02
-#define ADV7180_ISR1_ADI	0x42
-#define ADV7180_ICR1_ADI	0x43
-#define ADV7180_IMR1_ADI	0x44
-#define ADV7180_IMR2_ADI	0x48
-#define ADV7180_IRQ3_AD_CHANGE	0x08
-#define ADV7180_ISR3_ADI	0x4A
-#define ADV7180_ICR3_ADI	0x4B
-#define ADV7180_IMR3_ADI	0x4C
-#define ADV7180_IMR4_ADI	0x50
-
-#define ADV7180_NTSC_V_BIT_END_REG	0xE6
-#define ADV7180_NTSC_V_BIT_END_MANUAL_NVEND	0x4F
-
-struct adv7180_state {
-	struct v4l2_ctrl_handler ctrl_hdl;
-	struct v4l2_subdev	sd;
-	struct work_struct	work;
-	struct mutex		mutex; /* mutual excl. when accessing chip */
-	int			irq;
-	v4l2_std_id		curr_norm;
-	bool			autodetect;
-	u8			input;
-};
-#define to_adv7180_sd(_ctrl) (&container_of(_ctrl->handler,		\
-					    struct adv7180_state,	\
-					    ctrl_hdl)->sd)
-
-static v4l2_std_id adv7180_std_to_v4l2(u8 status1)
-{
-	switch (status1 & ADV7180_STATUS1_AUTOD_MASK) {
-	case ADV7180_STATUS1_AUTOD_NTSM_M_J:
-		return V4L2_STD_NTSC;
-	case ADV7180_STATUS1_AUTOD_NTSC_4_43:
-		return V4L2_STD_NTSC_443;
-	case ADV7180_STATUS1_AUTOD_PAL_M:
-		return V4L2_STD_PAL_M;
-	case ADV7180_STATUS1_AUTOD_PAL_60:
-		return V4L2_STD_PAL_60;
-	case ADV7180_STATUS1_AUTOD_PAL_B_G:
-		return V4L2_STD_PAL;
-	case ADV7180_STATUS1_AUTOD_SECAM:
-		return V4L2_STD_SECAM;
-	case ADV7180_STATUS1_AUTOD_PAL_COMB:
-		return V4L2_STD_PAL_Nc | V4L2_STD_PAL_N;
-	case ADV7180_STATUS1_AUTOD_SECAM_525:
-		return V4L2_STD_SECAM;
-	default:
-		return V4L2_STD_UNKNOWN;
-	}
-}
-
-static int v4l2_std_to_adv7180(v4l2_std_id std)
-{
-	if (std == V4L2_STD_PAL_60)
-		return ADV7180_INPUT_CONTROL_PAL60;
-	if (std == V4L2_STD_NTSC_443)
-		return ADV7180_INPUT_CONTROL_NTSC_443;
-	if (std == V4L2_STD_PAL_N)
-		return ADV7180_INPUT_CONTROL_PAL_N;
-	if (std == V4L2_STD_PAL_M)
-		return ADV7180_INPUT_CONTROL_PAL_M;
-	if (std == V4L2_STD_PAL_Nc)
-		return ADV7180_INPUT_CONTROL_PAL_COMB_N;
-
-	if (std & V4L2_STD_PAL)
-		return ADV7180_INPUT_CONTROL_PAL_BG;
-	if (std & V4L2_STD_NTSC)
-		return ADV7180_INPUT_CONTROL_NTSC_M;
-	if (std & V4L2_STD_SECAM)
-		return ADV7180_INPUT_CONTROL_PAL_SECAM;
-
-	return -EINVAL;
-}
-
-static u32 adv7180_status_to_v4l2(u8 status1)
-{
-	if (!(status1 & ADV7180_STATUS1_IN_LOCK))
-		return V4L2_IN_ST_NO_SIGNAL;
-
-	return 0;
-}
-
-static int __adv7180_status(struct i2c_client *client, u32 *status,
-			    v4l2_std_id *std)
-{
-	int status1 = i2c_smbus_read_byte_data(client, ADV7180_STATUS1_REG);
-
-	if (status1 < 0)
-		return status1;
-
-	if (status)
-		*status = adv7180_status_to_v4l2(status1);
-	if (std)
-		*std = adv7180_std_to_v4l2(status1);
-
-	return 0;
-}
-
-static inline struct adv7180_state *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct adv7180_state, sd);
-}
-
-static int adv7180_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
-{
-	struct adv7180_state *state = to_state(sd);
-	int err = mutex_lock_interruptible(&state->mutex);
-	if (err)
-		return err;
-
-	/* when we are interrupt driven we know the state */
-	if (!state->autodetect || state->irq > 0)
-		*std = state->curr_norm;
-	else
-		err = __adv7180_status(v4l2_get_subdevdata(sd), NULL, std);
-
-	mutex_unlock(&state->mutex);
-	return err;
-}
-
-static int adv7180_s_routing(struct v4l2_subdev *sd, u32 input,
-			     u32 output, u32 config)
-{
-	struct adv7180_state *state = to_state(sd);
-	int ret = mutex_lock_interruptible(&state->mutex);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (ret)
-		return ret;
-
-	/* We cannot discriminate between LQFP and 40-pin LFCSP, so accept
-	 * all inputs and let the card driver take care of validation
-	 */
-	if ((input & ADV7180_INPUT_CONTROL_INSEL_MASK) != input)
-		goto out;
-
-	ret = i2c_smbus_read_byte_data(client, ADV7180_INPUT_CONTROL_REG);
-
-	if (ret < 0)
-		goto out;
-
-	ret &= ~ADV7180_INPUT_CONTROL_INSEL_MASK;
-	ret = i2c_smbus_write_byte_data(client,
-					ADV7180_INPUT_CONTROL_REG, ret | input);
-	state->input = input;
-out:
-	mutex_unlock(&state->mutex);
-	return ret;
-}
-
-static int adv7180_g_input_status(struct v4l2_subdev *sd, u32 *status)
-{
-	struct adv7180_state *state = to_state(sd);
-	int ret = mutex_lock_interruptible(&state->mutex);
-	if (ret)
-		return ret;
-
-	ret = __adv7180_status(v4l2_get_subdevdata(sd), status, NULL);
-	mutex_unlock(&state->mutex);
-	return ret;
-}
-
-static int adv7180_g_chip_ident(struct v4l2_subdev *sd,
-				struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7180, 0);
-}
-
-static int adv7180_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct adv7180_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	int ret = mutex_lock_interruptible(&state->mutex);
-	if (ret)
-		return ret;
-
-	/* all standards -> autodetect */
-	if (std == V4L2_STD_ALL) {
-		ret =
-		    i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
-				ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM
-					      | state->input);
-		if (ret < 0)
-			goto out;
-
-		__adv7180_status(client, NULL, &state->curr_norm);
-		state->autodetect = true;
-	} else {
-		ret = v4l2_std_to_adv7180(std);
-		if (ret < 0)
-			goto out;
-
-		ret = i2c_smbus_write_byte_data(client,
-						ADV7180_INPUT_CONTROL_REG,
-						ret | state->input);
-		if (ret < 0)
-			goto out;
-
-		state->curr_norm = std;
-		state->autodetect = false;
-	}
-	ret = 0;
-out:
-	mutex_unlock(&state->mutex);
-	return ret;
-}
-
-static int adv7180_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_adv7180_sd(ctrl);
-	struct adv7180_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	int ret = mutex_lock_interruptible(&state->mutex);
-	int val;
-
-	if (ret)
-		return ret;
-	val = ctrl->val;
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		ret = i2c_smbus_write_byte_data(client, ADV7180_BRI_REG, val);
-		break;
-	case V4L2_CID_HUE:
-		/*Hue is inverted according to HSL chart */
-		ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG, -val);
-		break;
-	case V4L2_CID_CONTRAST:
-		ret = i2c_smbus_write_byte_data(client, ADV7180_CON_REG, val);
-		break;
-	case V4L2_CID_SATURATION:
-		/*
-		 *This could be V4L2_CID_BLUE_BALANCE/V4L2_CID_RED_BALANCE
-		 *Let's not confuse the user, everybody understands saturation
-		 */
-		ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CB_REG,
-						val);
-		if (ret < 0)
-			break;
-		ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CR_REG,
-						val);
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	mutex_unlock(&state->mutex);
-	return ret;
-}
-
-static const struct v4l2_ctrl_ops adv7180_ctrl_ops = {
-	.s_ctrl = adv7180_s_ctrl,
-};
-
-static int adv7180_init_controls(struct adv7180_state *state)
-{
-	v4l2_ctrl_handler_init(&state->ctrl_hdl, 4);
-
-	v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
-			  V4L2_CID_BRIGHTNESS, ADV7180_BRI_MIN,
-			  ADV7180_BRI_MAX, 1, ADV7180_BRI_DEF);
-	v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
-			  V4L2_CID_CONTRAST, ADV7180_CON_MIN,
-			  ADV7180_CON_MAX, 1, ADV7180_CON_DEF);
-	v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
-			  V4L2_CID_SATURATION, ADV7180_SAT_MIN,
-			  ADV7180_SAT_MAX, 1, ADV7180_SAT_DEF);
-	v4l2_ctrl_new_std(&state->ctrl_hdl, &adv7180_ctrl_ops,
-			  V4L2_CID_HUE, ADV7180_HUE_MIN,
-			  ADV7180_HUE_MAX, 1, ADV7180_HUE_DEF);
-	state->sd.ctrl_handler = &state->ctrl_hdl;
-	if (state->ctrl_hdl.error) {
-		int err = state->ctrl_hdl.error;
-
-		v4l2_ctrl_handler_free(&state->ctrl_hdl);
-		return err;
-	}
-	v4l2_ctrl_handler_setup(&state->ctrl_hdl);
-
-	return 0;
-}
-static void adv7180_exit_controls(struct adv7180_state *state)
-{
-	v4l2_ctrl_handler_free(&state->ctrl_hdl);
-}
-
-static const struct v4l2_subdev_video_ops adv7180_video_ops = {
-	.querystd = adv7180_querystd,
-	.g_input_status = adv7180_g_input_status,
-	.s_routing = adv7180_s_routing,
-};
-
-static const struct v4l2_subdev_core_ops adv7180_core_ops = {
-	.g_chip_ident = adv7180_g_chip_ident,
-	.s_std = adv7180_s_std,
-	.queryctrl = v4l2_subdev_queryctrl,
-	.g_ctrl = v4l2_subdev_g_ctrl,
-	.s_ctrl = v4l2_subdev_s_ctrl,
-};
-
-static const struct v4l2_subdev_ops adv7180_ops = {
-	.core = &adv7180_core_ops,
-	.video = &adv7180_video_ops,
-};
-
-static void adv7180_work(struct work_struct *work)
-{
-	struct adv7180_state *state = container_of(work, struct adv7180_state,
-						   work);
-	struct i2c_client *client = v4l2_get_subdevdata(&state->sd);
-	u8 isr3;
-
-	mutex_lock(&state->mutex);
-	i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG,
-				  ADV7180_ADI_CTRL_IRQ_SPACE);
-	isr3 = i2c_smbus_read_byte_data(client, ADV7180_ISR3_ADI);
-	/* clear */
-	i2c_smbus_write_byte_data(client, ADV7180_ICR3_ADI, isr3);
-	i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG, 0);
-
-	if (isr3 & ADV7180_IRQ3_AD_CHANGE && state->autodetect)
-		__adv7180_status(client, NULL, &state->curr_norm);
-	mutex_unlock(&state->mutex);
-
-	enable_irq(state->irq);
-}
-
-static irqreturn_t adv7180_irq(int irq, void *devid)
-{
-	struct adv7180_state *state = devid;
-
-	schedule_work(&state->work);
-
-	disable_irq_nosync(state->irq);
-
-	return IRQ_HANDLED;
-}
-
-static int init_device(struct i2c_client *client, struct adv7180_state *state)
-{
-	int ret;
-
-	/* Initialize adv7180 */
-	/* Enable autodetection */
-	if (state->autodetect) {
-		ret =
-		    i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
-				ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM
-					      | state->input);
-		if (ret < 0)
-			return ret;
-
-		ret =
-		    i2c_smbus_write_byte_data(client,
-					      ADV7180_AUTODETECT_ENABLE_REG,
-					      ADV7180_AUTODETECT_DEFAULT);
-		if (ret < 0)
-			return ret;
-	} else {
-		ret = v4l2_std_to_adv7180(state->curr_norm);
-		if (ret < 0)
-			return ret;
-
-		ret =
-		    i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
-					      ret | state->input);
-		if (ret < 0)
-			return ret;
-
-	}
-	/* ITU-R BT.656-4 compatible */
-	ret = i2c_smbus_write_byte_data(client,
-			ADV7180_EXTENDED_OUTPUT_CONTROL_REG,
-			ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS);
-	if (ret < 0)
-		return ret;
-
-	/* Manually set V bit end position in NTSC mode */
-	ret = i2c_smbus_write_byte_data(client,
-					ADV7180_NTSC_V_BIT_END_REG,
-					ADV7180_NTSC_V_BIT_END_MANUAL_NVEND);
-	if (ret < 0)
-		return ret;
-
-	/* read current norm */
-	__adv7180_status(client, NULL, &state->curr_norm);
-
-	/* register for interrupts */
-	if (state->irq > 0) {
-		ret = request_irq(state->irq, adv7180_irq, 0, KBUILD_MODNAME,
-				  state);
-		if (ret)
-			return ret;
-
-		ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG,
-						ADV7180_ADI_CTRL_IRQ_SPACE);
-		if (ret < 0)
-			return ret;
-
-		/* config the Interrupt pin to be active low */
-		ret = i2c_smbus_write_byte_data(client, ADV7180_ICONF1_ADI,
-						ADV7180_ICONF1_ACTIVE_LOW |
-						ADV7180_ICONF1_PSYNC_ONLY);
-		if (ret < 0)
-			return ret;
-
-		ret = i2c_smbus_write_byte_data(client, ADV7180_IMR1_ADI, 0);
-		if (ret < 0)
-			return ret;
-
-		ret = i2c_smbus_write_byte_data(client, ADV7180_IMR2_ADI, 0);
-		if (ret < 0)
-			return ret;
-
-		/* enable AD change interrupts interrupts */
-		ret = i2c_smbus_write_byte_data(client, ADV7180_IMR3_ADI,
-						ADV7180_IRQ3_AD_CHANGE);
-		if (ret < 0)
-			return ret;
-
-		ret = i2c_smbus_write_byte_data(client, ADV7180_IMR4_ADI, 0);
-		if (ret < 0)
-			return ret;
-
-		ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG,
-						0);
-		if (ret < 0)
-			return ret;
-	}
-
-	return 0;
-}
-
-static __devinit int adv7180_probe(struct i2c_client *client,
-				   const struct i2c_device_id *id)
-{
-	struct adv7180_state *state;
-	struct v4l2_subdev *sd;
-	int ret;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -EIO;
-
-	v4l_info(client, "chip found @ 0x%02x (%s)\n",
-		 client->addr, client->adapter->name);
-
-	state = kzalloc(sizeof(struct adv7180_state), GFP_KERNEL);
-	if (state == NULL) {
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	state->irq = client->irq;
-	INIT_WORK(&state->work, adv7180_work);
-	mutex_init(&state->mutex);
-	state->autodetect = true;
-	state->input = 0;
-	sd = &state->sd;
-	v4l2_i2c_subdev_init(sd, client, &adv7180_ops);
-
-	ret = adv7180_init_controls(state);
-	if (ret)
-		goto err_unreg_subdev;
-	ret = init_device(client, state);
-	if (ret)
-		goto err_free_ctrl;
-	return 0;
-
-err_free_ctrl:
-	adv7180_exit_controls(state);
-err_unreg_subdev:
-	mutex_destroy(&state->mutex);
-	v4l2_device_unregister_subdev(sd);
-	kfree(state);
-err:
-	printk(KERN_ERR KBUILD_MODNAME ": Failed to probe: %d\n", ret);
-	return ret;
-}
-
-static __devexit int adv7180_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct adv7180_state *state = to_state(sd);
-
-	if (state->irq > 0) {
-		free_irq(client->irq, state);
-		if (cancel_work_sync(&state->work)) {
-			/*
-			 * Work was pending, therefore we need to enable
-			 * IRQ here to balance the disable_irq() done in the
-			 * interrupt handler.
-			 */
-			enable_irq(state->irq);
-		}
-	}
-
-	mutex_destroy(&state->mutex);
-	v4l2_device_unregister_subdev(sd);
-	kfree(to_state(sd));
-	return 0;
-}
-
-static const struct i2c_device_id adv7180_id[] = {
-	{KBUILD_MODNAME, 0},
-	{},
-};
-
-#ifdef CONFIG_PM
-static int adv7180_suspend(struct i2c_client *client, pm_message_t state)
-{
-	int ret;
-
-	ret = i2c_smbus_write_byte_data(client, ADV7180_PWR_MAN_REG,
-					ADV7180_PWR_MAN_OFF);
-	if (ret < 0)
-		return ret;
-	return 0;
-}
-
-static int adv7180_resume(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct adv7180_state *state = to_state(sd);
-	int ret;
-
-	ret = i2c_smbus_write_byte_data(client, ADV7180_PWR_MAN_REG,
-					ADV7180_PWR_MAN_ON);
-	if (ret < 0)
-		return ret;
-	ret = init_device(client, state);
-	if (ret < 0)
-		return ret;
-	return 0;
-}
-#endif
-
-MODULE_DEVICE_TABLE(i2c, adv7180_id);
-
-static struct i2c_driver adv7180_driver = {
-	.driver = {
-		   .owner = THIS_MODULE,
-		   .name = KBUILD_MODNAME,
-		   },
-	.probe = adv7180_probe,
-	.remove = __devexit_p(adv7180_remove),
-#ifdef CONFIG_PM
-	.suspend = adv7180_suspend,
-	.resume = adv7180_resume,
-#endif
-	.id_table = adv7180_id,
-};
-
-module_i2c_driver(adv7180_driver);
-
-MODULE_DESCRIPTION("Analog Devices ADV7180 video decoder driver");
-MODULE_AUTHOR("Mocean Laboratories");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/video/adv7183.c b/drivers/media/video/adv7183.c
deleted file mode 100644
index e1d4c89..0000000
--- a/drivers/media/video/adv7183.c
+++ /dev/null
@@ -1,699 +0,0 @@
-/*
- * adv7183.c Analog Devices ADV7183 video decoder driver
- *
- * Copyright (c) 2011 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/videodev2.h>
-
-#include <media/adv7183.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-device.h>
-
-#include "adv7183_regs.h"
-
-struct adv7183 {
-	struct v4l2_subdev sd;
-	struct v4l2_ctrl_handler hdl;
-
-	v4l2_std_id std; /* Current set standard */
-	u32 input;
-	u32 output;
-	unsigned reset_pin;
-	unsigned oe_pin;
-	struct v4l2_mbus_framefmt fmt;
-};
-
-/* EXAMPLES USING 27 MHz CLOCK
- * Mode 1 CVBS Input (Composite Video on AIN5)
- * All standards are supported through autodetect, 8-bit, 4:2:2, ITU-R BT.656 output on P15 to P8.
- */
-static const unsigned char adv7183_init_regs[] = {
-	ADV7183_IN_CTRL, 0x04,           /* CVBS input on AIN5 */
-	ADV7183_DIGI_CLAMP_CTRL_1, 0x00, /* Slow down digital clamps */
-	ADV7183_SHAP_FILT_CTRL, 0x41,    /* Set CSFM to SH1 */
-	ADV7183_ADC_CTRL, 0x16,          /* Power down ADC 1 and ADC 2 */
-	ADV7183_CTI_DNR_CTRL_4, 0x04,    /* Set DNR threshold to 4 for flat response */
-	/* ADI recommended programming sequence */
-	ADV7183_ADI_CTRL, 0x80,
-	ADV7183_CTI_DNR_CTRL_4, 0x20,
-	0x52, 0x18,
-	0x58, 0xED,
-	0x77, 0xC5,
-	0x7C, 0x93,
-	0x7D, 0x00,
-	0xD0, 0x48,
-	0xD5, 0xA0,
-	0xD7, 0xEA,
-	ADV7183_SD_SATURATION_CR, 0x3E,
-	ADV7183_PAL_V_END, 0x3E,
-	ADV7183_PAL_F_TOGGLE, 0x0F,
-	ADV7183_ADI_CTRL, 0x00,
-};
-
-static inline struct adv7183 *to_adv7183(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct adv7183, sd);
-}
-static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
-{
-	return &container_of(ctrl->handler, struct adv7183, hdl)->sd;
-}
-
-static inline int adv7183_read(struct v4l2_subdev *sd, unsigned char reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return i2c_smbus_read_byte_data(client, reg);
-}
-
-static inline int adv7183_write(struct v4l2_subdev *sd, unsigned char reg,
-				unsigned char value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-static int adv7183_writeregs(struct v4l2_subdev *sd,
-		const unsigned char *regs, unsigned int num)
-{
-	unsigned char reg, data;
-	unsigned int cnt = 0;
-
-	if (num & 0x1) {
-		v4l2_err(sd, "invalid regs array\n");
-		return -1;
-	}
-
-	while (cnt < num) {
-		reg = *regs++;
-		data = *regs++;
-		cnt += 2;
-
-		adv7183_write(sd, reg, data);
-	}
-	return 0;
-}
-
-static int adv7183_log_status(struct v4l2_subdev *sd)
-{
-	struct adv7183 *decoder = to_adv7183(sd);
-
-	v4l2_info(sd, "adv7183: Input control = 0x%02x\n",
-			adv7183_read(sd, ADV7183_IN_CTRL));
-	v4l2_info(sd, "adv7183: Video selection = 0x%02x\n",
-			adv7183_read(sd, ADV7183_VD_SEL));
-	v4l2_info(sd, "adv7183: Output control = 0x%02x\n",
-			adv7183_read(sd, ADV7183_OUT_CTRL));
-	v4l2_info(sd, "adv7183: Extended output control = 0x%02x\n",
-			adv7183_read(sd, ADV7183_EXT_OUT_CTRL));
-	v4l2_info(sd, "adv7183: Autodetect enable = 0x%02x\n",
-			adv7183_read(sd, ADV7183_AUTO_DET_EN));
-	v4l2_info(sd, "adv7183: Contrast = 0x%02x\n",
-			adv7183_read(sd, ADV7183_CONTRAST));
-	v4l2_info(sd, "adv7183: Brightness = 0x%02x\n",
-			adv7183_read(sd, ADV7183_BRIGHTNESS));
-	v4l2_info(sd, "adv7183: Hue = 0x%02x\n",
-			adv7183_read(sd, ADV7183_HUE));
-	v4l2_info(sd, "adv7183: Default value Y = 0x%02x\n",
-			adv7183_read(sd, ADV7183_DEF_Y));
-	v4l2_info(sd, "adv7183: Default value C = 0x%02x\n",
-			adv7183_read(sd, ADV7183_DEF_C));
-	v4l2_info(sd, "adv7183: ADI control = 0x%02x\n",
-			adv7183_read(sd, ADV7183_ADI_CTRL));
-	v4l2_info(sd, "adv7183: Power Management = 0x%02x\n",
-			adv7183_read(sd, ADV7183_POW_MANAGE));
-	v4l2_info(sd, "adv7183: Status 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n",
-			adv7183_read(sd, ADV7183_STATUS_1),
-			adv7183_read(sd, ADV7183_STATUS_2),
-			adv7183_read(sd, ADV7183_STATUS_3));
-	v4l2_info(sd, "adv7183: Ident = 0x%02x\n",
-			adv7183_read(sd, ADV7183_IDENT));
-	v4l2_info(sd, "adv7183: Analog clamp control = 0x%02x\n",
-			adv7183_read(sd, ADV7183_ANAL_CLAMP_CTRL));
-	v4l2_info(sd, "adv7183: Digital clamp control 1 = 0x%02x\n",
-			adv7183_read(sd, ADV7183_DIGI_CLAMP_CTRL_1));
-	v4l2_info(sd, "adv7183: Shaping filter control 1 and 2 = 0x%02x 0x%02x\n",
-			adv7183_read(sd, ADV7183_SHAP_FILT_CTRL),
-			adv7183_read(sd, ADV7183_SHAP_FILT_CTRL_2));
-	v4l2_info(sd, "adv7183: Comb filter control = 0x%02x\n",
-			adv7183_read(sd, ADV7183_COMB_FILT_CTRL));
-	v4l2_info(sd, "adv7183: ADI control 2 = 0x%02x\n",
-			adv7183_read(sd, ADV7183_ADI_CTRL_2));
-	v4l2_info(sd, "adv7183: Pixel delay control = 0x%02x\n",
-			adv7183_read(sd, ADV7183_PIX_DELAY_CTRL));
-	v4l2_info(sd, "adv7183: Misc gain control = 0x%02x\n",
-			adv7183_read(sd, ADV7183_MISC_GAIN_CTRL));
-	v4l2_info(sd, "adv7183: AGC mode control = 0x%02x\n",
-			adv7183_read(sd, ADV7183_AGC_MODE_CTRL));
-	v4l2_info(sd, "adv7183: Chroma gain control 1 and 2 = 0x%02x 0x%02x\n",
-			adv7183_read(sd, ADV7183_CHRO_GAIN_CTRL_1),
-			adv7183_read(sd, ADV7183_CHRO_GAIN_CTRL_2));
-	v4l2_info(sd, "adv7183: Luma gain control 1 and 2 = 0x%02x 0x%02x\n",
-			adv7183_read(sd, ADV7183_LUMA_GAIN_CTRL_1),
-			adv7183_read(sd, ADV7183_LUMA_GAIN_CTRL_2));
-	v4l2_info(sd, "adv7183: Vsync field control 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n",
-			adv7183_read(sd, ADV7183_VS_FIELD_CTRL_1),
-			adv7183_read(sd, ADV7183_VS_FIELD_CTRL_2),
-			adv7183_read(sd, ADV7183_VS_FIELD_CTRL_3));
-	v4l2_info(sd, "adv7183: Hsync positon control 1 2 and 3 = 0x%02x 0x%02x 0x%02x\n",
-			adv7183_read(sd, ADV7183_HS_POS_CTRL_1),
-			adv7183_read(sd, ADV7183_HS_POS_CTRL_2),
-			adv7183_read(sd, ADV7183_HS_POS_CTRL_3));
-	v4l2_info(sd, "adv7183: Polarity = 0x%02x\n",
-			adv7183_read(sd, ADV7183_POLARITY));
-	v4l2_info(sd, "adv7183: ADC control = 0x%02x\n",
-			adv7183_read(sd, ADV7183_ADC_CTRL));
-	v4l2_info(sd, "adv7183: SD offset Cb and Cr = 0x%02x 0x%02x\n",
-			adv7183_read(sd, ADV7183_SD_OFFSET_CB),
-			adv7183_read(sd, ADV7183_SD_OFFSET_CR));
-	v4l2_info(sd, "adv7183: SD saturation Cb and Cr = 0x%02x 0x%02x\n",
-			adv7183_read(sd, ADV7183_SD_SATURATION_CB),
-			adv7183_read(sd, ADV7183_SD_SATURATION_CR));
-	v4l2_info(sd, "adv7183: Drive strength = 0x%02x\n",
-			adv7183_read(sd, ADV7183_DRIVE_STR));
-	v4l2_ctrl_handler_log_status(&decoder->hdl, sd->name);
-	return 0;
-}
-
-static int adv7183_g_std(struct v4l2_subdev *sd, v4l2_std_id *std)
-{
-	struct adv7183 *decoder = to_adv7183(sd);
-
-	*std = decoder->std;
-	return 0;
-}
-
-static int adv7183_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct adv7183 *decoder = to_adv7183(sd);
-	int reg;
-
-	reg = adv7183_read(sd, ADV7183_IN_CTRL) & 0xF;
-	if (std == V4L2_STD_PAL_60)
-		reg |= 0x60;
-	else if (std == V4L2_STD_NTSC_443)
-		reg |= 0x70;
-	else if (std == V4L2_STD_PAL_N)
-		reg |= 0x90;
-	else if (std == V4L2_STD_PAL_M)
-		reg |= 0xA0;
-	else if (std == V4L2_STD_PAL_Nc)
-		reg |= 0xC0;
-	else if (std & V4L2_STD_PAL)
-		reg |= 0x80;
-	else if (std & V4L2_STD_NTSC)
-		reg |= 0x50;
-	else if (std & V4L2_STD_SECAM)
-		reg |= 0xE0;
-	else
-		return -EINVAL;
-	adv7183_write(sd, ADV7183_IN_CTRL, reg);
-
-	decoder->std = std;
-
-	return 0;
-}
-
-static int adv7183_reset(struct v4l2_subdev *sd, u32 val)
-{
-	int reg;
-
-	reg = adv7183_read(sd, ADV7183_POW_MANAGE) | 0x80;
-	adv7183_write(sd, ADV7183_POW_MANAGE, reg);
-	/* wait 5ms before any further i2c writes are performed */
-	usleep_range(5000, 10000);
-	return 0;
-}
-
-static int adv7183_s_routing(struct v4l2_subdev *sd,
-				u32 input, u32 output, u32 config)
-{
-	struct adv7183 *decoder = to_adv7183(sd);
-	int reg;
-
-	if ((input > ADV7183_COMPONENT1) || (output > ADV7183_16BIT_OUT))
-		return -EINVAL;
-
-	if (input != decoder->input) {
-		decoder->input = input;
-		reg = adv7183_read(sd, ADV7183_IN_CTRL) & 0xF0;
-		switch (input) {
-		case ADV7183_COMPOSITE1:
-			reg |= 0x1;
-			break;
-		case ADV7183_COMPOSITE2:
-			reg |= 0x2;
-			break;
-		case ADV7183_COMPOSITE3:
-			reg |= 0x3;
-			break;
-		case ADV7183_COMPOSITE4:
-			reg |= 0x4;
-			break;
-		case ADV7183_COMPOSITE5:
-			reg |= 0x5;
-			break;
-		case ADV7183_COMPOSITE6:
-			reg |= 0xB;
-			break;
-		case ADV7183_COMPOSITE7:
-			reg |= 0xC;
-			break;
-		case ADV7183_COMPOSITE8:
-			reg |= 0xD;
-			break;
-		case ADV7183_COMPOSITE9:
-			reg |= 0xE;
-			break;
-		case ADV7183_COMPOSITE10:
-			reg |= 0xF;
-			break;
-		case ADV7183_SVIDEO0:
-			reg |= 0x6;
-			break;
-		case ADV7183_SVIDEO1:
-			reg |= 0x7;
-			break;
-		case ADV7183_SVIDEO2:
-			reg |= 0x8;
-			break;
-		case ADV7183_COMPONENT0:
-			reg |= 0x9;
-			break;
-		case ADV7183_COMPONENT1:
-			reg |= 0xA;
-			break;
-		default:
-			break;
-		}
-		adv7183_write(sd, ADV7183_IN_CTRL, reg);
-	}
-
-	if (output != decoder->output) {
-		decoder->output = output;
-		reg = adv7183_read(sd, ADV7183_OUT_CTRL) & 0xC0;
-		switch (output) {
-		case ADV7183_16BIT_OUT:
-			reg |= 0x9;
-			break;
-		default:
-			reg |= 0xC;
-			break;
-		}
-		adv7183_write(sd, ADV7183_OUT_CTRL, reg);
-	}
-
-	return 0;
-}
-
-static int adv7183_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-	int val = ctrl->val;
-
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		if (val < 0)
-			val = 127 - val;
-		adv7183_write(sd, ADV7183_BRIGHTNESS, val);
-		break;
-	case V4L2_CID_CONTRAST:
-		adv7183_write(sd, ADV7183_CONTRAST, val);
-		break;
-	case V4L2_CID_SATURATION:
-		adv7183_write(sd, ADV7183_SD_SATURATION_CB, val >> 8);
-		adv7183_write(sd, ADV7183_SD_SATURATION_CR, (val & 0xFF));
-		break;
-	case V4L2_CID_HUE:
-		adv7183_write(sd, ADV7183_SD_OFFSET_CB, val >> 8);
-		adv7183_write(sd, ADV7183_SD_OFFSET_CR, (val & 0xFF));
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int adv7183_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
-{
-	struct adv7183 *decoder = to_adv7183(sd);
-	int reg;
-
-	/* enable autodetection block */
-	reg = adv7183_read(sd, ADV7183_IN_CTRL) & 0xF;
-	adv7183_write(sd, ADV7183_IN_CTRL, reg);
-
-	/* wait autodetection switch */
-	mdelay(10);
-
-	/* get autodetection result */
-	reg = adv7183_read(sd, ADV7183_STATUS_1);
-	switch ((reg >> 0x4) & 0x7) {
-	case 0:
-		*std = V4L2_STD_NTSC;
-		break;
-	case 1:
-		*std = V4L2_STD_NTSC_443;
-		break;
-	case 2:
-		*std = V4L2_STD_PAL_M;
-		break;
-	case 3:
-		*std = V4L2_STD_PAL_60;
-		break;
-	case 4:
-		*std = V4L2_STD_PAL;
-		break;
-	case 5:
-		*std = V4L2_STD_SECAM;
-		break;
-	case 6:
-		*std = V4L2_STD_PAL_Nc;
-		break;
-	case 7:
-		*std = V4L2_STD_SECAM;
-		break;
-	default:
-		*std = V4L2_STD_UNKNOWN;
-		break;
-	}
-
-	/* after std detection, write back user set std */
-	adv7183_s_std(sd, decoder->std);
-	return 0;
-}
-
-static int adv7183_g_input_status(struct v4l2_subdev *sd, u32 *status)
-{
-	int reg;
-
-	*status = V4L2_IN_ST_NO_SIGNAL;
-	reg = adv7183_read(sd, ADV7183_STATUS_1);
-	if (reg < 0)
-		return reg;
-	if (reg & 0x1)
-		*status = 0;
-	return 0;
-}
-
-static int adv7183_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
-				enum v4l2_mbus_pixelcode *code)
-{
-	if (index > 0)
-		return -EINVAL;
-
-	*code = V4L2_MBUS_FMT_UYVY8_2X8;
-	return 0;
-}
-
-static int adv7183_try_mbus_fmt(struct v4l2_subdev *sd,
-				struct v4l2_mbus_framefmt *fmt)
-{
-	struct adv7183 *decoder = to_adv7183(sd);
-
-	fmt->code = V4L2_MBUS_FMT_UYVY8_2X8;
-	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
-	if (decoder->std & V4L2_STD_525_60) {
-		fmt->field = V4L2_FIELD_SEQ_TB;
-		fmt->width = 720;
-		fmt->height = 480;
-	} else {
-		fmt->field = V4L2_FIELD_SEQ_BT;
-		fmt->width = 720;
-		fmt->height = 576;
-	}
-	return 0;
-}
-
-static int adv7183_s_mbus_fmt(struct v4l2_subdev *sd,
-				struct v4l2_mbus_framefmt *fmt)
-{
-	struct adv7183 *decoder = to_adv7183(sd);
-
-	adv7183_try_mbus_fmt(sd, fmt);
-	decoder->fmt = *fmt;
-	return 0;
-}
-
-static int adv7183_g_mbus_fmt(struct v4l2_subdev *sd,
-				struct v4l2_mbus_framefmt *fmt)
-{
-	struct adv7183 *decoder = to_adv7183(sd);
-
-	*fmt = decoder->fmt;
-	return 0;
-}
-
-static int adv7183_s_stream(struct v4l2_subdev *sd, int enable)
-{
-	struct adv7183 *decoder = to_adv7183(sd);
-
-	if (enable)
-		gpio_direction_output(decoder->oe_pin, 0);
-	else
-		gpio_direction_output(decoder->oe_pin, 1);
-	udelay(1);
-	return 0;
-}
-
-static int adv7183_g_chip_ident(struct v4l2_subdev *sd,
-		struct v4l2_dbg_chip_ident *chip)
-{
-	int rev;
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	/* 0x11 for adv7183, 0x13 for adv7183b */
-	rev = adv7183_read(sd, ADV7183_IDENT);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7183, rev);
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int adv7183_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	reg->val = adv7183_read(sd, reg->reg & 0xff);
-	reg->size = 1;
-	return 0;
-}
-
-static int adv7183_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	adv7183_write(sd, reg->reg & 0xff, reg->val & 0xff);
-	return 0;
-}
-#endif
-
-static const struct v4l2_ctrl_ops adv7183_ctrl_ops = {
-	.s_ctrl = adv7183_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops adv7183_core_ops = {
-	.log_status = adv7183_log_status,
-	.g_std = adv7183_g_std,
-	.s_std = adv7183_s_std,
-	.reset = adv7183_reset,
-	.g_chip_ident = adv7183_g_chip_ident,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.g_register = adv7183_g_register,
-	.s_register = adv7183_s_register,
-#endif
-};
-
-static const struct v4l2_subdev_video_ops adv7183_video_ops = {
-	.s_routing = adv7183_s_routing,
-	.querystd = adv7183_querystd,
-	.g_input_status = adv7183_g_input_status,
-	.enum_mbus_fmt = adv7183_enum_mbus_fmt,
-	.try_mbus_fmt = adv7183_try_mbus_fmt,
-	.s_mbus_fmt = adv7183_s_mbus_fmt,
-	.g_mbus_fmt = adv7183_g_mbus_fmt,
-	.s_stream = adv7183_s_stream,
-};
-
-static const struct v4l2_subdev_ops adv7183_ops = {
-	.core = &adv7183_core_ops,
-	.video = &adv7183_video_ops,
-};
-
-static int adv7183_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	struct adv7183 *decoder;
-	struct v4l2_subdev *sd;
-	struct v4l2_ctrl_handler *hdl;
-	int ret;
-	struct v4l2_mbus_framefmt fmt;
-	const unsigned *pin_array;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -EIO;
-
-	v4l_info(client, "chip found @ 0x%02x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	pin_array = client->dev.platform_data;
-	if (pin_array == NULL)
-		return -EINVAL;
-
-	decoder = kzalloc(sizeof(struct adv7183), GFP_KERNEL);
-	if (decoder == NULL)
-		return -ENOMEM;
-
-	decoder->reset_pin = pin_array[0];
-	decoder->oe_pin = pin_array[1];
-
-	if (gpio_request(decoder->reset_pin, "ADV7183 Reset")) {
-		v4l_err(client, "failed to request GPIO %d\n", decoder->reset_pin);
-		ret = -EBUSY;
-		goto err_free_decoder;
-	}
-
-	if (gpio_request(decoder->oe_pin, "ADV7183 Output Enable")) {
-		v4l_err(client, "failed to request GPIO %d\n", decoder->oe_pin);
-		ret = -EBUSY;
-		goto err_free_reset;
-	}
-
-	sd = &decoder->sd;
-	v4l2_i2c_subdev_init(sd, client, &adv7183_ops);
-
-	hdl = &decoder->hdl;
-	v4l2_ctrl_handler_init(hdl, 4);
-	v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops,
-			V4L2_CID_BRIGHTNESS, -128, 127, 1, 0);
-	v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops,
-			V4L2_CID_CONTRAST, 0, 0xFF, 1, 0x80);
-	v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops,
-			V4L2_CID_SATURATION, 0, 0xFFFF, 1, 0x8080);
-	v4l2_ctrl_new_std(hdl, &adv7183_ctrl_ops,
-			V4L2_CID_HUE, 0, 0xFFFF, 1, 0x8080);
-	/* hook the control handler into the driver */
-	sd->ctrl_handler = hdl;
-	if (hdl->error) {
-		ret = hdl->error;
-
-		v4l2_ctrl_handler_free(hdl);
-		goto err_free_oe;
-	}
-
-	/* v4l2 doesn't support an autodetect standard, pick PAL as default */
-	decoder->std = V4L2_STD_PAL;
-	decoder->input = ADV7183_COMPOSITE4;
-	decoder->output = ADV7183_8BIT_OUT;
-
-	gpio_direction_output(decoder->oe_pin, 1);
-	/* reset chip */
-	gpio_direction_output(decoder->reset_pin, 0);
-	/* reset pulse width at least 5ms */
-	mdelay(10);
-	gpio_direction_output(decoder->reset_pin, 1);
-	/* wait 5ms before any further i2c writes are performed */
-	mdelay(5);
-
-	adv7183_writeregs(sd, adv7183_init_regs, ARRAY_SIZE(adv7183_init_regs));
-	adv7183_s_std(sd, decoder->std);
-	fmt.width = 720;
-	fmt.height = 576;
-	adv7183_s_mbus_fmt(sd, &fmt);
-
-	/* initialize the hardware to the default control values */
-	ret = v4l2_ctrl_handler_setup(hdl);
-	if (ret) {
-		v4l2_ctrl_handler_free(hdl);
-		goto err_free_oe;
-	}
-
-	return 0;
-err_free_oe:
-	gpio_free(decoder->oe_pin);
-err_free_reset:
-	gpio_free(decoder->reset_pin);
-err_free_decoder:
-	kfree(decoder);
-	return ret;
-}
-
-static int adv7183_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct adv7183 *decoder = to_adv7183(sd);
-
-	v4l2_device_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(sd->ctrl_handler);
-	gpio_free(decoder->oe_pin);
-	gpio_free(decoder->reset_pin);
-	kfree(decoder);
-	return 0;
-}
-
-static const struct i2c_device_id adv7183_id[] = {
-	{"adv7183", 0},
-	{},
-};
-
-MODULE_DEVICE_TABLE(i2c, adv7183_id);
-
-static struct i2c_driver adv7183_driver = {
-	.driver = {
-		.owner  = THIS_MODULE,
-		.name   = "adv7183",
-	},
-	.probe          = adv7183_probe,
-	.remove         = __devexit_p(adv7183_remove),
-	.id_table       = adv7183_id,
-};
-
-static __init int adv7183_init(void)
-{
-	return i2c_add_driver(&adv7183_driver);
-}
-
-static __exit void adv7183_exit(void)
-{
-	i2c_del_driver(&adv7183_driver);
-}
-
-module_init(adv7183_init);
-module_exit(adv7183_exit);
-
-MODULE_DESCRIPTION("Analog Devices ADV7183 video decoder driver");
-MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/video/adv7183_regs.h b/drivers/media/video/adv7183_regs.h
deleted file mode 100644
index 4a5b7d2..0000000
--- a/drivers/media/video/adv7183_regs.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * adv7183 - Analog Devices ADV7183 video decoder registers
- *
- * Copyright (c) 2011 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _ADV7183_REGS_H_
-#define _ADV7183_REGS_H_
-
-#define ADV7183_IN_CTRL            0x00 /* Input control */
-#define ADV7183_VD_SEL             0x01 /* Video selection */
-#define ADV7183_OUT_CTRL           0x03 /* Output control */
-#define ADV7183_EXT_OUT_CTRL       0x04 /* Extended output control */
-#define ADV7183_AUTO_DET_EN        0x07 /* Autodetect enable */
-#define ADV7183_CONTRAST           0x08 /* Contrast */
-#define ADV7183_BRIGHTNESS         0x0A /* Brightness */
-#define ADV7183_HUE                0x0B /* Hue */
-#define ADV7183_DEF_Y              0x0C /* Default value Y */
-#define ADV7183_DEF_C              0x0D /* Default value C */
-#define ADV7183_ADI_CTRL           0x0E /* ADI control */
-#define ADV7183_POW_MANAGE         0x0F /* Power Management */
-#define ADV7183_STATUS_1           0x10 /* Status 1 */
-#define ADV7183_IDENT              0x11 /* Ident */
-#define ADV7183_STATUS_2           0x12 /* Status 2 */
-#define ADV7183_STATUS_3           0x13 /* Status 3 */
-#define ADV7183_ANAL_CLAMP_CTRL    0x14 /* Analog clamp control */
-#define ADV7183_DIGI_CLAMP_CTRL_1  0x15 /* Digital clamp control 1 */
-#define ADV7183_SHAP_FILT_CTRL     0x17 /* Shaping filter control */
-#define ADV7183_SHAP_FILT_CTRL_2   0x18 /* Shaping filter control 2 */
-#define ADV7183_COMB_FILT_CTRL     0x19 /* Comb filter control */
-#define ADV7183_ADI_CTRL_2         0x1D /* ADI control 2 */
-#define ADV7183_PIX_DELAY_CTRL     0x27 /* Pixel delay control */
-#define ADV7183_MISC_GAIN_CTRL     0x2B /* Misc gain control */
-#define ADV7183_AGC_MODE_CTRL      0x2C /* AGC mode control */
-#define ADV7183_CHRO_GAIN_CTRL_1   0x2D /* Chroma gain control 1 */
-#define ADV7183_CHRO_GAIN_CTRL_2   0x2E /* Chroma gain control 2 */
-#define ADV7183_LUMA_GAIN_CTRL_1   0x2F /* Luma gain control 1 */
-#define ADV7183_LUMA_GAIN_CTRL_2   0x30 /* Luma gain control 2 */
-#define ADV7183_VS_FIELD_CTRL_1    0x31 /* Vsync field control 1 */
-#define ADV7183_VS_FIELD_CTRL_2    0x32 /* Vsync field control 2 */
-#define ADV7183_VS_FIELD_CTRL_3    0x33 /* Vsync field control 3 */
-#define ADV7183_HS_POS_CTRL_1      0x34 /* Hsync positon control 1 */
-#define ADV7183_HS_POS_CTRL_2      0x35 /* Hsync positon control 2 */
-#define ADV7183_HS_POS_CTRL_3      0x36 /* Hsync positon control 3 */
-#define ADV7183_POLARITY           0x37 /* Polarity */
-#define ADV7183_NTSC_COMB_CTRL     0x38 /* NTSC comb control */
-#define ADV7183_PAL_COMB_CTRL      0x39 /* PAL comb control */
-#define ADV7183_ADC_CTRL           0x3A /* ADC control */
-#define ADV7183_MAN_WIN_CTRL       0x3D /* Manual window control */
-#define ADV7183_RESAMPLE_CTRL      0x41 /* Resample control */
-#define ADV7183_GEMSTAR_CTRL_1     0x48 /* Gemstar ctrl 1 */
-#define ADV7183_GEMSTAR_CTRL_2     0x49 /* Gemstar ctrl 2 */
-#define ADV7183_GEMSTAR_CTRL_3     0x4A /* Gemstar ctrl 3 */
-#define ADV7183_GEMSTAR_CTRL_4     0x4B /* Gemstar ctrl 4 */
-#define ADV7183_GEMSTAR_CTRL_5     0x4C /* Gemstar ctrl 5 */
-#define ADV7183_CTI_DNR_CTRL_1     0x4D /* CTI DNR ctrl 1 */
-#define ADV7183_CTI_DNR_CTRL_2     0x4E /* CTI DNR ctrl 2 */
-#define ADV7183_CTI_DNR_CTRL_4     0x50 /* CTI DNR ctrl 4 */
-#define ADV7183_LOCK_CNT           0x51 /* Lock count */
-#define ADV7183_FREE_LINE_LEN      0x8F /* Free-Run line length 1 */
-#define ADV7183_VBI_INFO           0x90 /* VBI info */
-#define ADV7183_WSS_1              0x91 /* WSS 1 */
-#define ADV7183_WSS_2              0x92 /* WSS 2 */
-#define ADV7183_EDTV_1             0x93 /* EDTV 1 */
-#define ADV7183_EDTV_2             0x94 /* EDTV 2 */
-#define ADV7183_EDTV_3             0x95 /* EDTV 3 */
-#define ADV7183_CGMS_1             0x96 /* CGMS 1 */
-#define ADV7183_CGMS_2             0x97 /* CGMS 2 */
-#define ADV7183_CGMS_3             0x98 /* CGMS 3 */
-#define ADV7183_CCAP_1             0x99 /* CCAP 1 */
-#define ADV7183_CCAP_2             0x9A /* CCAP 2 */
-#define ADV7183_LETTERBOX_1        0x9B /* Letterbox 1 */
-#define ADV7183_LETTERBOX_2        0x9C /* Letterbox 2 */
-#define ADV7183_LETTERBOX_3        0x9D /* Letterbox 3 */
-#define ADV7183_CRC_EN             0xB2 /* CRC enable */
-#define ADV7183_ADC_SWITCH_1       0xC3 /* ADC switch 1 */
-#define ADV7183_ADC_SWITCH_2       0xC4 /* ADC swithc 2 */
-#define ADV7183_LETTERBOX_CTRL_1   0xDC /* Letterbox control 1 */
-#define ADV7183_LETTERBOX_CTRL_2   0xDD /* Letterbox control 2 */
-#define ADV7183_SD_OFFSET_CB       0xE1 /* SD offset Cb */
-#define ADV7183_SD_OFFSET_CR       0xE2 /* SD offset Cr */
-#define ADV7183_SD_SATURATION_CB   0xE3 /* SD saturation Cb */
-#define ADV7183_SD_SATURATION_CR   0xE4 /* SD saturation Cr */
-#define ADV7183_NTSC_V_BEGIN       0xE5 /* NTSC V bit begin */
-#define ADV7183_NTSC_V_END         0xE6 /* NTSC V bit end */
-#define ADV7183_NTSC_F_TOGGLE      0xE7 /* NTSC F bit toggle */
-#define ADV7183_PAL_V_BEGIN        0xE8 /* PAL V bit begin */
-#define ADV7183_PAL_V_END          0xE9 /* PAL V bit end */
-#define ADV7183_PAL_F_TOGGLE       0xEA /* PAL F bit toggle */
-#define ADV7183_DRIVE_STR          0xF4 /* Drive strength */
-#define ADV7183_IF_COMP_CTRL       0xF8 /* IF comp control */
-#define ADV7183_VS_MODE_CTRL       0xF9 /* VS mode control */
-
-#endif
diff --git a/drivers/media/video/adv7343.c b/drivers/media/video/adv7343.c
deleted file mode 100644
index 2b5aa67..0000000
--- a/drivers/media/video/adv7343.c
+++ /dev/null
@@ -1,476 +0,0 @@
-/*
- * adv7343 - ADV7343 Video Encoder Driver
- *
- * The encoder hardware does not support SECAM.
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed .as is. WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ctype.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/videodev2.h>
-#include <linux/uaccess.h>
-
-#include <media/adv7343.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-ctrls.h>
-
-#include "adv7343_regs.h"
-
-MODULE_DESCRIPTION("ADV7343 video encoder driver");
-MODULE_LICENSE("GPL");
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Debug level 0-1");
-
-struct adv7343_state {
-	struct v4l2_subdev sd;
-	struct v4l2_ctrl_handler hdl;
-	u8 reg00;
-	u8 reg01;
-	u8 reg02;
-	u8 reg35;
-	u8 reg80;
-	u8 reg82;
-	u32 output;
-	v4l2_std_id std;
-};
-
-static inline struct adv7343_state *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct adv7343_state, sd);
-}
-
-static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
-{
-	return &container_of(ctrl->handler, struct adv7343_state, hdl)->sd;
-}
-
-static inline int adv7343_write(struct v4l2_subdev *sd, u8 reg, u8 value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-static const u8 adv7343_init_reg_val[] = {
-	ADV7343_SOFT_RESET, ADV7343_SOFT_RESET_DEFAULT,
-	ADV7343_POWER_MODE_REG, ADV7343_POWER_MODE_REG_DEFAULT,
-
-	ADV7343_HD_MODE_REG1, ADV7343_HD_MODE_REG1_DEFAULT,
-	ADV7343_HD_MODE_REG2, ADV7343_HD_MODE_REG2_DEFAULT,
-	ADV7343_HD_MODE_REG3, ADV7343_HD_MODE_REG3_DEFAULT,
-	ADV7343_HD_MODE_REG4, ADV7343_HD_MODE_REG4_DEFAULT,
-	ADV7343_HD_MODE_REG5, ADV7343_HD_MODE_REG5_DEFAULT,
-	ADV7343_HD_MODE_REG6, ADV7343_HD_MODE_REG6_DEFAULT,
-	ADV7343_HD_MODE_REG7, ADV7343_HD_MODE_REG7_DEFAULT,
-
-	ADV7343_SD_MODE_REG1, ADV7343_SD_MODE_REG1_DEFAULT,
-	ADV7343_SD_MODE_REG2, ADV7343_SD_MODE_REG2_DEFAULT,
-	ADV7343_SD_MODE_REG3, ADV7343_SD_MODE_REG3_DEFAULT,
-	ADV7343_SD_MODE_REG4, ADV7343_SD_MODE_REG4_DEFAULT,
-	ADV7343_SD_MODE_REG5, ADV7343_SD_MODE_REG5_DEFAULT,
-	ADV7343_SD_MODE_REG6, ADV7343_SD_MODE_REG6_DEFAULT,
-	ADV7343_SD_MODE_REG7, ADV7343_SD_MODE_REG7_DEFAULT,
-	ADV7343_SD_MODE_REG8, ADV7343_SD_MODE_REG8_DEFAULT,
-
-	ADV7343_SD_HUE_REG, ADV7343_SD_HUE_REG_DEFAULT,
-	ADV7343_SD_CGMS_WSS0, ADV7343_SD_CGMS_WSS0_DEFAULT,
-	ADV7343_SD_BRIGHTNESS_WSS, ADV7343_SD_BRIGHTNESS_WSS_DEFAULT,
-};
-
-/*
- * 			    2^32
- * FSC(reg) =  FSC (HZ) * --------
- *			  27000000
- */
-static const struct adv7343_std_info stdinfo[] = {
-	{
-		/* FSC(Hz) = 3,579,545.45 Hz */
-		SD_STD_NTSC, 569408542, V4L2_STD_NTSC,
-	}, {
-		/* FSC(Hz) = 3,575,611.00 Hz */
-		SD_STD_PAL_M, 568782678, V4L2_STD_PAL_M,
-	}, {
-		/* FSC(Hz) = 3,582,056.00 */
-		SD_STD_PAL_N, 569807903, V4L2_STD_PAL_Nc,
-	}, {
-		/* FSC(Hz) = 4,433,618.75 Hz */
-		SD_STD_PAL_N, 705268427, V4L2_STD_PAL_N,
-	}, {
-		/* FSC(Hz) = 4,433,618.75 Hz */
-		SD_STD_PAL_BDGHI, 705268427, V4L2_STD_PAL,
-	}, {
-		/* FSC(Hz) = 4,433,618.75 Hz */
-		SD_STD_NTSC, 705268427, V4L2_STD_NTSC_443,
-	}, {
-		/* FSC(Hz) = 4,433,618.75 Hz */
-		SD_STD_PAL_M, 705268427, V4L2_STD_PAL_60,
-	},
-};
-
-static int adv7343_setstd(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct adv7343_state *state = to_state(sd);
-	struct adv7343_std_info *std_info;
-	int num_std;
-	char *fsc_ptr;
-	u8 reg, val;
-	int err = 0;
-	int i = 0;
-
-	std_info = (struct adv7343_std_info *)stdinfo;
-	num_std = ARRAY_SIZE(stdinfo);
-
-	for (i = 0; i < num_std; i++) {
-		if (std_info[i].stdid & std)
-			break;
-	}
-
-	if (i == num_std) {
-		v4l2_dbg(1, debug, sd,
-				"Invalid std or std is not supported: %llx\n",
-						(unsigned long long)std);
-		return -EINVAL;
-	}
-
-	/* Set the standard */
-	val = state->reg80 & (~(SD_STD_MASK));
-	val |= std_info[i].standard_val3;
-	err = adv7343_write(sd, ADV7343_SD_MODE_REG1, val);
-	if (err < 0)
-		goto setstd_exit;
-
-	state->reg80 = val;
-
-	/* Configure the input mode register */
-	val = state->reg01 & (~((u8) INPUT_MODE_MASK));
-	val |= SD_INPUT_MODE;
-	err = adv7343_write(sd, ADV7343_MODE_SELECT_REG, val);
-	if (err < 0)
-		goto setstd_exit;
-
-	state->reg01 = val;
-
-	/* Program the sub carrier frequency registers */
-	fsc_ptr = (unsigned char *)&std_info[i].fsc_val;
-	reg = ADV7343_FSC_REG0;
-	for (i = 0; i < 4; i++, reg++, fsc_ptr++) {
-		err = adv7343_write(sd, reg, *fsc_ptr);
-		if (err < 0)
-			goto setstd_exit;
-	}
-
-	val = state->reg80;
-
-	/* Filter settings */
-	if (std & (V4L2_STD_NTSC | V4L2_STD_NTSC_443))
-		val &= 0x03;
-	else if (std & ~V4L2_STD_SECAM)
-		val |= 0x04;
-
-	err = adv7343_write(sd, ADV7343_SD_MODE_REG1, val);
-	if (err < 0)
-		goto setstd_exit;
-
-	state->reg80 = val;
-
-setstd_exit:
-	if (err != 0)
-		v4l2_err(sd, "Error setting std, write failed\n");
-
-	return err;
-}
-
-static int adv7343_setoutput(struct v4l2_subdev *sd, u32 output_type)
-{
-	struct adv7343_state *state = to_state(sd);
-	unsigned char val;
-	int err = 0;
-
-	if (output_type > ADV7343_SVIDEO_ID) {
-		v4l2_dbg(1, debug, sd,
-			"Invalid output type or output type not supported:%d\n",
-								output_type);
-		return -EINVAL;
-	}
-
-	/* Enable Appropriate DAC */
-	val = state->reg00 & 0x03;
-
-	if (output_type == ADV7343_COMPOSITE_ID)
-		val |= ADV7343_COMPOSITE_POWER_VALUE;
-	else if (output_type == ADV7343_COMPONENT_ID)
-		val |= ADV7343_COMPONENT_POWER_VALUE;
-	else
-		val |= ADV7343_SVIDEO_POWER_VALUE;
-
-	err = adv7343_write(sd, ADV7343_POWER_MODE_REG, val);
-	if (err < 0)
-		goto setoutput_exit;
-
-	state->reg00 = val;
-
-	/* Enable YUV output */
-	val = state->reg02 | YUV_OUTPUT_SELECT;
-	err = adv7343_write(sd, ADV7343_MODE_REG0, val);
-	if (err < 0)
-		goto setoutput_exit;
-
-	state->reg02 = val;
-
-	/* configure SD DAC Output 2 and SD DAC Output 1 bit to zero */
-	val = state->reg82 & (SD_DAC_1_DI & SD_DAC_2_DI);
-	err = adv7343_write(sd, ADV7343_SD_MODE_REG2, val);
-	if (err < 0)
-		goto setoutput_exit;
-
-	state->reg82 = val;
-
-	/* configure ED/HD Color DAC Swap and ED/HD RGB Input Enable bit to
-	 * zero */
-	val = state->reg35 & (HD_RGB_INPUT_DI & HD_DAC_SWAP_DI);
-	err = adv7343_write(sd, ADV7343_HD_MODE_REG6, val);
-	if (err < 0)
-		goto setoutput_exit;
-
-	state->reg35 = val;
-
-setoutput_exit:
-	if (err != 0)
-		v4l2_err(sd, "Error setting output, write failed\n");
-
-	return err;
-}
-
-static int adv7343_log_status(struct v4l2_subdev *sd)
-{
-	struct adv7343_state *state = to_state(sd);
-
-	v4l2_info(sd, "Standard: %llx\n", (unsigned long long)state->std);
-	v4l2_info(sd, "Output: %s\n", (state->output == 0) ? "Composite" :
-			((state->output == 1) ? "Component" : "S-Video"));
-	return 0;
-}
-
-static int adv7343_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		return adv7343_write(sd, ADV7343_SD_BRIGHTNESS_WSS,
-					ctrl->val);
-
-	case V4L2_CID_HUE:
-		return adv7343_write(sd, ADV7343_SD_HUE_REG, ctrl->val);
-
-	case V4L2_CID_GAIN:
-		return adv7343_write(sd, ADV7343_DAC2_OUTPUT_LEVEL, ctrl->val);
-	}
-	return -EINVAL;
-}
-
-static int adv7343_g_chip_ident(struct v4l2_subdev *sd,
-				struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7343, 0);
-}
-
-static const struct v4l2_ctrl_ops adv7343_ctrl_ops = {
-	.s_ctrl = adv7343_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops adv7343_core_ops = {
-	.log_status = adv7343_log_status,
-	.g_chip_ident = adv7343_g_chip_ident,
-	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
-	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
-	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
-	.g_ctrl = v4l2_subdev_g_ctrl,
-	.s_ctrl = v4l2_subdev_s_ctrl,
-	.queryctrl = v4l2_subdev_queryctrl,
-	.querymenu = v4l2_subdev_querymenu,
-};
-
-static int adv7343_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct adv7343_state *state = to_state(sd);
-	int err = 0;
-
-	if (state->std == std)
-		return 0;
-
-	err = adv7343_setstd(sd, std);
-	if (!err)
-		state->std = std;
-
-	return err;
-}
-
-static int adv7343_s_routing(struct v4l2_subdev *sd,
-		u32 input, u32 output, u32 config)
-{
-	struct adv7343_state *state = to_state(sd);
-	int err = 0;
-
-	if (state->output == output)
-		return 0;
-
-	err = adv7343_setoutput(sd, output);
-	if (!err)
-		state->output = output;
-
-	return err;
-}
-
-static const struct v4l2_subdev_video_ops adv7343_video_ops = {
-	.s_std_output	= adv7343_s_std_output,
-	.s_routing	= adv7343_s_routing,
-};
-
-static const struct v4l2_subdev_ops adv7343_ops = {
-	.core	= &adv7343_core_ops,
-	.video	= &adv7343_video_ops,
-};
-
-static int adv7343_initialize(struct v4l2_subdev *sd)
-{
-	struct adv7343_state *state = to_state(sd);
-	int err = 0;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(adv7343_init_reg_val); i += 2) {
-
-		err = adv7343_write(sd, adv7343_init_reg_val[i],
-					adv7343_init_reg_val[i+1]);
-		if (err) {
-			v4l2_err(sd, "Error initializing\n");
-			return err;
-		}
-	}
-
-	/* Configure for default video standard */
-	err = adv7343_setoutput(sd, state->output);
-	if (err < 0) {
-		v4l2_err(sd, "Error setting output during init\n");
-		return -EINVAL;
-	}
-
-	err = adv7343_setstd(sd, state->std);
-	if (err < 0) {
-		v4l2_err(sd, "Error setting std during init\n");
-		return -EINVAL;
-	}
-
-	return err;
-}
-
-static int adv7343_probe(struct i2c_client *client,
-				const struct i2c_device_id *id)
-{
-	struct adv7343_state *state;
-	int err;
-
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -ENODEV;
-
-	v4l_info(client, "chip found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	state = kzalloc(sizeof(struct adv7343_state), GFP_KERNEL);
-	if (state == NULL)
-		return -ENOMEM;
-
-	state->reg00	= 0x80;
-	state->reg01	= 0x00;
-	state->reg02	= 0x20;
-	state->reg35	= 0x00;
-	state->reg80	= ADV7343_SD_MODE_REG1_DEFAULT;
-	state->reg82	= ADV7343_SD_MODE_REG2_DEFAULT;
-
-	state->output = ADV7343_COMPOSITE_ID;
-	state->std = V4L2_STD_NTSC;
-
-	v4l2_i2c_subdev_init(&state->sd, client, &adv7343_ops);
-
-	v4l2_ctrl_handler_init(&state->hdl, 2);
-	v4l2_ctrl_new_std(&state->hdl, &adv7343_ctrl_ops,
-			V4L2_CID_BRIGHTNESS, ADV7343_BRIGHTNESS_MIN,
-					     ADV7343_BRIGHTNESS_MAX, 1,
-					     ADV7343_BRIGHTNESS_DEF);
-	v4l2_ctrl_new_std(&state->hdl, &adv7343_ctrl_ops,
-			V4L2_CID_HUE, ADV7343_HUE_MIN,
-				      ADV7343_HUE_MAX, 1,
-				      ADV7343_HUE_DEF);
-	v4l2_ctrl_new_std(&state->hdl, &adv7343_ctrl_ops,
-			V4L2_CID_GAIN, ADV7343_GAIN_MIN,
-				       ADV7343_GAIN_MAX, 1,
-				       ADV7343_GAIN_DEF);
-	state->sd.ctrl_handler = &state->hdl;
-	if (state->hdl.error) {
-		int err = state->hdl.error;
-
-		v4l2_ctrl_handler_free(&state->hdl);
-		kfree(state);
-		return err;
-	}
-	v4l2_ctrl_handler_setup(&state->hdl);
-
-	err = adv7343_initialize(&state->sd);
-	if (err) {
-		v4l2_ctrl_handler_free(&state->hdl);
-		kfree(state);
-	}
-	return err;
-}
-
-static int adv7343_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct adv7343_state *state = to_state(sd);
-
-	v4l2_device_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(&state->hdl);
-	kfree(state);
-
-	return 0;
-}
-
-static const struct i2c_device_id adv7343_id[] = {
-	{"adv7343", 0},
-	{},
-};
-
-MODULE_DEVICE_TABLE(i2c, adv7343_id);
-
-static struct i2c_driver adv7343_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "adv7343",
-	},
-	.probe		= adv7343_probe,
-	.remove		= adv7343_remove,
-	.id_table	= adv7343_id,
-};
-
-module_i2c_driver(adv7343_driver);
diff --git a/drivers/media/video/adv7343_regs.h b/drivers/media/video/adv7343_regs.h
deleted file mode 100644
index 4466067..0000000
--- a/drivers/media/video/adv7343_regs.h
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * ADV7343 encoder related structure and register definitions
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed .as is. WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef ADV7343_REG_H
-#define ADV7343_REGS_H
-
-struct adv7343_std_info {
-	u32 standard_val3;
-	u32 fsc_val;
-	v4l2_std_id stdid;
-};
-
-/* Register offset macros */
-#define ADV7343_POWER_MODE_REG		(0x00)
-#define ADV7343_MODE_SELECT_REG		(0x01)
-#define ADV7343_MODE_REG0		(0x02)
-
-#define ADV7343_DAC2_OUTPUT_LEVEL	(0x0b)
-
-#define ADV7343_SOFT_RESET		(0x17)
-
-#define ADV7343_HD_MODE_REG1		(0x30)
-#define ADV7343_HD_MODE_REG2		(0x31)
-#define ADV7343_HD_MODE_REG3		(0x32)
-#define ADV7343_HD_MODE_REG4		(0x33)
-#define ADV7343_HD_MODE_REG5		(0x34)
-#define ADV7343_HD_MODE_REG6		(0x35)
-
-#define ADV7343_HD_MODE_REG7		(0x39)
-
-#define ADV7343_SD_MODE_REG1		(0x80)
-#define ADV7343_SD_MODE_REG2		(0x82)
-#define ADV7343_SD_MODE_REG3		(0x83)
-#define ADV7343_SD_MODE_REG4		(0x84)
-#define ADV7343_SD_MODE_REG5		(0x86)
-#define ADV7343_SD_MODE_REG6		(0x87)
-#define ADV7343_SD_MODE_REG7		(0x88)
-#define ADV7343_SD_MODE_REG8		(0x89)
-
-#define ADV7343_FSC_REG0		(0x8C)
-#define ADV7343_FSC_REG1		(0x8D)
-#define ADV7343_FSC_REG2		(0x8E)
-#define ADV7343_FSC_REG3		(0x8F)
-
-#define ADV7343_SD_CGMS_WSS0		(0x99)
-
-#define ADV7343_SD_HUE_REG		(0xA0)
-#define ADV7343_SD_BRIGHTNESS_WSS	(0xA1)
-
-/* Default values for the registers */
-#define ADV7343_POWER_MODE_REG_DEFAULT		(0x10)
-#define ADV7343_HD_MODE_REG1_DEFAULT		(0x3C)	/* Changed Default
-							   720p EAVSAV code*/
-#define ADV7343_HD_MODE_REG2_DEFAULT		(0x01)	/* Changed Pixel data
-							   valid */
-#define ADV7343_HD_MODE_REG3_DEFAULT		(0x00)	/* Color delay 0 clks */
-#define ADV7343_HD_MODE_REG4_DEFAULT		(0xE8)	/* Changed */
-#define ADV7343_HD_MODE_REG5_DEFAULT		(0x08)
-#define ADV7343_HD_MODE_REG6_DEFAULT		(0x00)
-#define ADV7343_HD_MODE_REG7_DEFAULT		(0x00)
-#define ADV7343_SD_MODE_REG8_DEFAULT		(0x00)
-#define ADV7343_SOFT_RESET_DEFAULT		(0x02)
-#define ADV7343_COMPOSITE_POWER_VALUE		(0x80)
-#define ADV7343_COMPONENT_POWER_VALUE		(0x1C)
-#define ADV7343_SVIDEO_POWER_VALUE		(0x60)
-#define ADV7343_SD_HUE_REG_DEFAULT		(127)
-#define ADV7343_SD_BRIGHTNESS_WSS_DEFAULT	(0x03)
-
-#define ADV7343_SD_CGMS_WSS0_DEFAULT		(0x10)
-
-#define ADV7343_SD_MODE_REG1_DEFAULT		(0x00)
-#define ADV7343_SD_MODE_REG2_DEFAULT		(0xC9)
-#define ADV7343_SD_MODE_REG3_DEFAULT		(0x10)
-#define ADV7343_SD_MODE_REG4_DEFAULT		(0x01)
-#define ADV7343_SD_MODE_REG5_DEFAULT		(0x02)
-#define ADV7343_SD_MODE_REG6_DEFAULT		(0x0C)
-#define ADV7343_SD_MODE_REG7_DEFAULT		(0x04)
-#define ADV7343_SD_MODE_REG8_DEFAULT		(0x00)
-
-/* Bit masks for Mode Select Register */
-#define INPUT_MODE_MASK			(0x70)
-#define SD_INPUT_MODE			(0x00)
-#define HD_720P_INPUT_MODE		(0x10)
-#define HD_1080I_INPUT_MODE		(0x10)
-
-/* Bit masks for Mode Register 0 */
-#define TEST_PATTERN_BLACK_BAR_EN	(0x04)
-#define YUV_OUTPUT_SELECT		(0x20)
-#define RGB_OUTPUT_SELECT		(0xDF)
-
-/* Bit masks for DAC output levels */
-#define DAC_OUTPUT_LEVEL_MASK		(0xFF)
-
-/* Bit masks for soft reset register */
-#define SOFT_RESET			(0x02)
-
-/* Bit masks for HD Mode Register 1 */
-#define OUTPUT_STD_MASK		(0x03)
-#define OUTPUT_STD_SHIFT	(0)
-#define OUTPUT_STD_EIA0_2	(0x00)
-#define OUTPUT_STD_EIA0_1	(0x01)
-#define OUTPUT_STD_FULL		(0x02)
-#define EMBEDDED_SYNC		(0x04)
-#define EXTERNAL_SYNC		(0xFB)
-#define STD_MODE_SHIFT		(3)
-#define STD_MODE_MASK		(0x1F)
-#define STD_MODE_720P		(0x05)
-#define STD_MODE_720P_25	(0x08)
-#define STD_MODE_720P_30	(0x07)
-#define STD_MODE_720P_50	(0x06)
-#define STD_MODE_1080I		(0x0D)
-#define STD_MODE_1080I_25fps	(0x0E)
-#define STD_MODE_1080P_24	(0x12)
-#define STD_MODE_1080P_25	(0x10)
-#define STD_MODE_1080P_30	(0x0F)
-#define STD_MODE_525P		(0x00)
-#define STD_MODE_625P		(0x03)
-
-/* Bit masks for SD Mode Register 1 */
-#define SD_STD_MASK		(0x03)
-#define SD_STD_NTSC		(0x00)
-#define SD_STD_PAL_BDGHI	(0x01)
-#define SD_STD_PAL_M		(0x02)
-#define SD_STD_PAL_N		(0x03)
-#define SD_LUMA_FLTR_MASK	(0x7)
-#define SD_LUMA_FLTR_SHIFT	(0x2)
-#define SD_CHROMA_FLTR_MASK	(0x7)
-#define SD_CHROMA_FLTR_SHIFT	(0x5)
-
-/* Bit masks for SD Mode Register 2 */
-#define SD_PBPR_SSAF_EN		(0x01)
-#define SD_PBPR_SSAF_DI		(0xFE)
-#define SD_DAC_1_DI		(0xFD)
-#define SD_DAC_2_DI		(0xFB)
-#define SD_PEDESTAL_EN		(0x08)
-#define SD_PEDESTAL_DI		(0xF7)
-#define SD_SQUARE_PIXEL_EN	(0x10)
-#define SD_SQUARE_PIXEL_DI	(0xEF)
-#define SD_PIXEL_DATA_VALID	(0x40)
-#define SD_ACTIVE_EDGE_EN	(0x80)
-#define SD_ACTIVE_EDGE_DI	(0x7F)
-
-/* Bit masks for HD Mode Register 6 */
-#define HD_RGB_INPUT_EN		(0x02)
-#define HD_RGB_INPUT_DI		(0xFD)
-#define HD_PBPR_SYNC_EN		(0x04)
-#define HD_PBPR_SYNC_DI		(0xFB)
-#define HD_DAC_SWAP_EN		(0x08)
-#define HD_DAC_SWAP_DI		(0xF7)
-#define HD_GAMMA_CURVE_A	(0xEF)
-#define HD_GAMMA_CURVE_B	(0x10)
-#define HD_GAMMA_EN		(0x20)
-#define HD_GAMMA_DI		(0xDF)
-#define HD_ADPT_FLTR_MODEB	(0x40)
-#define HD_ADPT_FLTR_MODEA	(0xBF)
-#define HD_ADPT_FLTR_EN		(0x80)
-#define HD_ADPT_FLTR_DI		(0x7F)
-
-#define ADV7343_BRIGHTNESS_MAX	(127)
-#define ADV7343_BRIGHTNESS_MIN	(0)
-#define ADV7343_BRIGHTNESS_DEF	(3)
-#define ADV7343_HUE_MAX		(255)
-#define ADV7343_HUE_MIN		(0)
-#define ADV7343_HUE_DEF		(127)
-#define ADV7343_GAIN_MAX	(64)
-#define ADV7343_GAIN_MIN	(-64)
-#define ADV7343_GAIN_DEF	(0)
-
-#endif
diff --git a/drivers/media/video/adv7393.c b/drivers/media/video/adv7393.c
deleted file mode 100644
index 3dc6098..0000000
--- a/drivers/media/video/adv7393.c
+++ /dev/null
@@ -1,487 +0,0 @@
-/*
- * adv7393 - ADV7393 Video Encoder Driver
- *
- * The encoder hardware does not support SECAM.
- *
- * Copyright (C) 2010-2012 ADVANSEE - http://www.advansee.com/
- * Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
- *
- * Based on ADV7343 driver,
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed .as is. WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ctype.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/videodev2.h>
-#include <linux/uaccess.h>
-
-#include <media/adv7393.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-ctrls.h>
-
-#include "adv7393_regs.h"
-
-MODULE_DESCRIPTION("ADV7393 video encoder driver");
-MODULE_LICENSE("GPL");
-
-static bool debug;
-module_param(debug, bool, 0644);
-MODULE_PARM_DESC(debug, "Debug level 0-1");
-
-struct adv7393_state {
-	struct v4l2_subdev sd;
-	struct v4l2_ctrl_handler hdl;
-	u8 reg00;
-	u8 reg01;
-	u8 reg02;
-	u8 reg35;
-	u8 reg80;
-	u8 reg82;
-	u32 output;
-	v4l2_std_id std;
-};
-
-static inline struct adv7393_state *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct adv7393_state, sd);
-}
-
-static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
-{
-	return &container_of(ctrl->handler, struct adv7393_state, hdl)->sd;
-}
-
-static inline int adv7393_write(struct v4l2_subdev *sd, u8 reg, u8 value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-static const u8 adv7393_init_reg_val[] = {
-	ADV7393_SOFT_RESET, ADV7393_SOFT_RESET_DEFAULT,
-	ADV7393_POWER_MODE_REG, ADV7393_POWER_MODE_REG_DEFAULT,
-
-	ADV7393_HD_MODE_REG1, ADV7393_HD_MODE_REG1_DEFAULT,
-	ADV7393_HD_MODE_REG2, ADV7393_HD_MODE_REG2_DEFAULT,
-	ADV7393_HD_MODE_REG3, ADV7393_HD_MODE_REG3_DEFAULT,
-	ADV7393_HD_MODE_REG4, ADV7393_HD_MODE_REG4_DEFAULT,
-	ADV7393_HD_MODE_REG5, ADV7393_HD_MODE_REG5_DEFAULT,
-	ADV7393_HD_MODE_REG6, ADV7393_HD_MODE_REG6_DEFAULT,
-	ADV7393_HD_MODE_REG7, ADV7393_HD_MODE_REG7_DEFAULT,
-
-	ADV7393_SD_MODE_REG1, ADV7393_SD_MODE_REG1_DEFAULT,
-	ADV7393_SD_MODE_REG2, ADV7393_SD_MODE_REG2_DEFAULT,
-	ADV7393_SD_MODE_REG3, ADV7393_SD_MODE_REG3_DEFAULT,
-	ADV7393_SD_MODE_REG4, ADV7393_SD_MODE_REG4_DEFAULT,
-	ADV7393_SD_MODE_REG5, ADV7393_SD_MODE_REG5_DEFAULT,
-	ADV7393_SD_MODE_REG6, ADV7393_SD_MODE_REG6_DEFAULT,
-	ADV7393_SD_MODE_REG7, ADV7393_SD_MODE_REG7_DEFAULT,
-	ADV7393_SD_MODE_REG8, ADV7393_SD_MODE_REG8_DEFAULT,
-
-	ADV7393_SD_TIMING_REG0, ADV7393_SD_TIMING_REG0_DEFAULT,
-
-	ADV7393_SD_HUE_ADJUST, ADV7393_SD_HUE_ADJUST_DEFAULT,
-	ADV7393_SD_CGMS_WSS0, ADV7393_SD_CGMS_WSS0_DEFAULT,
-	ADV7393_SD_BRIGHTNESS_WSS, ADV7393_SD_BRIGHTNESS_WSS_DEFAULT,
-};
-
-/*
- * 			    2^32
- * FSC(reg) =  FSC (HZ) * --------
- *			  27000000
- */
-static const struct adv7393_std_info stdinfo[] = {
-	{
-		/* FSC(Hz) = 4,433,618.75 Hz */
-		SD_STD_NTSC, 705268427, V4L2_STD_NTSC_443,
-	}, {
-		/* FSC(Hz) = 3,579,545.45 Hz */
-		SD_STD_NTSC, 569408542, V4L2_STD_NTSC,
-	}, {
-		/* FSC(Hz) = 3,575,611.00 Hz */
-		SD_STD_PAL_M, 568782678, V4L2_STD_PAL_M,
-	}, {
-		/* FSC(Hz) = 3,582,056.00 Hz */
-		SD_STD_PAL_N, 569807903, V4L2_STD_PAL_Nc,
-	}, {
-		/* FSC(Hz) = 4,433,618.75 Hz */
-		SD_STD_PAL_N, 705268427, V4L2_STD_PAL_N,
-	}, {
-		/* FSC(Hz) = 4,433,618.75 Hz */
-		SD_STD_PAL_M, 705268427, V4L2_STD_PAL_60,
-	}, {
-		/* FSC(Hz) = 4,433,618.75 Hz */
-		SD_STD_PAL_BDGHI, 705268427, V4L2_STD_PAL,
-	},
-};
-
-static int adv7393_setstd(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct adv7393_state *state = to_state(sd);
-	const struct adv7393_std_info *std_info;
-	int num_std;
-	u8 reg;
-	u32 val;
-	int err = 0;
-	int i;
-
-	num_std = ARRAY_SIZE(stdinfo);
-
-	for (i = 0; i < num_std; i++) {
-		if (stdinfo[i].stdid & std)
-			break;
-	}
-
-	if (i == num_std) {
-		v4l2_dbg(1, debug, sd,
-				"Invalid std or std is not supported: %llx\n",
-						(unsigned long long)std);
-		return -EINVAL;
-	}
-
-	std_info = &stdinfo[i];
-
-	/* Set the standard */
-	val = state->reg80 & ~SD_STD_MASK;
-	val |= std_info->standard_val3;
-	err = adv7393_write(sd, ADV7393_SD_MODE_REG1, val);
-	if (err < 0)
-		goto setstd_exit;
-
-	state->reg80 = val;
-
-	/* Configure the input mode register */
-	val = state->reg01 & ~INPUT_MODE_MASK;
-	val |= SD_INPUT_MODE;
-	err = adv7393_write(sd, ADV7393_MODE_SELECT_REG, val);
-	if (err < 0)
-		goto setstd_exit;
-
-	state->reg01 = val;
-
-	/* Program the sub carrier frequency registers */
-	val = std_info->fsc_val;
-	for (reg = ADV7393_FSC_REG0; reg <= ADV7393_FSC_REG3; reg++) {
-		err = adv7393_write(sd, reg, val);
-		if (err < 0)
-			goto setstd_exit;
-		val >>= 8;
-	}
-
-	val = state->reg82;
-
-	/* Pedestal settings */
-	if (std & (V4L2_STD_NTSC | V4L2_STD_NTSC_443))
-		val |= SD_PEDESTAL_EN;
-	else
-		val &= SD_PEDESTAL_DI;
-
-	err = adv7393_write(sd, ADV7393_SD_MODE_REG2, val);
-	if (err < 0)
-		goto setstd_exit;
-
-	state->reg82 = val;
-
-setstd_exit:
-	if (err != 0)
-		v4l2_err(sd, "Error setting std, write failed\n");
-
-	return err;
-}
-
-static int adv7393_setoutput(struct v4l2_subdev *sd, u32 output_type)
-{
-	struct adv7393_state *state = to_state(sd);
-	u8 val;
-	int err = 0;
-
-	if (output_type > ADV7393_SVIDEO_ID) {
-		v4l2_dbg(1, debug, sd,
-			"Invalid output type or output type not supported:%d\n",
-								output_type);
-		return -EINVAL;
-	}
-
-	/* Enable Appropriate DAC */
-	val = state->reg00 & 0x03;
-
-	if (output_type == ADV7393_COMPOSITE_ID)
-		val |= ADV7393_COMPOSITE_POWER_VALUE;
-	else if (output_type == ADV7393_COMPONENT_ID)
-		val |= ADV7393_COMPONENT_POWER_VALUE;
-	else
-		val |= ADV7393_SVIDEO_POWER_VALUE;
-
-	err = adv7393_write(sd, ADV7393_POWER_MODE_REG, val);
-	if (err < 0)
-		goto setoutput_exit;
-
-	state->reg00 = val;
-
-	/* Enable YUV output */
-	val = state->reg02 | YUV_OUTPUT_SELECT;
-	err = adv7393_write(sd, ADV7393_MODE_REG0, val);
-	if (err < 0)
-		goto setoutput_exit;
-
-	state->reg02 = val;
-
-	/* configure SD DAC Output 1 bit */
-	val = state->reg82;
-	if (output_type == ADV7393_COMPONENT_ID)
-		val &= SD_DAC_OUT1_DI;
-	else
-		val |= SD_DAC_OUT1_EN;
-	err = adv7393_write(sd, ADV7393_SD_MODE_REG2, val);
-	if (err < 0)
-		goto setoutput_exit;
-
-	state->reg82 = val;
-
-	/* configure ED/HD Color DAC Swap bit to zero */
-	val = state->reg35 & HD_DAC_SWAP_DI;
-	err = adv7393_write(sd, ADV7393_HD_MODE_REG6, val);
-	if (err < 0)
-		goto setoutput_exit;
-
-	state->reg35 = val;
-
-setoutput_exit:
-	if (err != 0)
-		v4l2_err(sd, "Error setting output, write failed\n");
-
-	return err;
-}
-
-static int adv7393_log_status(struct v4l2_subdev *sd)
-{
-	struct adv7393_state *state = to_state(sd);
-
-	v4l2_info(sd, "Standard: %llx\n", (unsigned long long)state->std);
-	v4l2_info(sd, "Output: %s\n", (state->output == 0) ? "Composite" :
-			((state->output == 1) ? "Component" : "S-Video"));
-	return 0;
-}
-
-static int adv7393_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		return adv7393_write(sd, ADV7393_SD_BRIGHTNESS_WSS,
-					ctrl->val & SD_BRIGHTNESS_VALUE_MASK);
-
-	case V4L2_CID_HUE:
-		return adv7393_write(sd, ADV7393_SD_HUE_ADJUST,
-					ctrl->val - ADV7393_HUE_MIN);
-
-	case V4L2_CID_GAIN:
-		return adv7393_write(sd, ADV7393_DAC123_OUTPUT_LEVEL,
-					ctrl->val);
-	}
-	return -EINVAL;
-}
-
-static int adv7393_g_chip_ident(struct v4l2_subdev *sd,
-				struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7393, 0);
-}
-
-static const struct v4l2_ctrl_ops adv7393_ctrl_ops = {
-	.s_ctrl = adv7393_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops adv7393_core_ops = {
-	.log_status = adv7393_log_status,
-	.g_chip_ident = adv7393_g_chip_ident,
-	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
-	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
-	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
-	.g_ctrl = v4l2_subdev_g_ctrl,
-	.s_ctrl = v4l2_subdev_s_ctrl,
-	.queryctrl = v4l2_subdev_queryctrl,
-	.querymenu = v4l2_subdev_querymenu,
-};
-
-static int adv7393_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct adv7393_state *state = to_state(sd);
-	int err = 0;
-
-	if (state->std == std)
-		return 0;
-
-	err = adv7393_setstd(sd, std);
-	if (!err)
-		state->std = std;
-
-	return err;
-}
-
-static int adv7393_s_routing(struct v4l2_subdev *sd,
-		u32 input, u32 output, u32 config)
-{
-	struct adv7393_state *state = to_state(sd);
-	int err = 0;
-
-	if (state->output == output)
-		return 0;
-
-	err = adv7393_setoutput(sd, output);
-	if (!err)
-		state->output = output;
-
-	return err;
-}
-
-static const struct v4l2_subdev_video_ops adv7393_video_ops = {
-	.s_std_output	= adv7393_s_std_output,
-	.s_routing	= adv7393_s_routing,
-};
-
-static const struct v4l2_subdev_ops adv7393_ops = {
-	.core	= &adv7393_core_ops,
-	.video	= &adv7393_video_ops,
-};
-
-static int adv7393_initialize(struct v4l2_subdev *sd)
-{
-	struct adv7393_state *state = to_state(sd);
-	int err = 0;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(adv7393_init_reg_val); i += 2) {
-
-		err = adv7393_write(sd, adv7393_init_reg_val[i],
-					adv7393_init_reg_val[i+1]);
-		if (err) {
-			v4l2_err(sd, "Error initializing\n");
-			return err;
-		}
-	}
-
-	/* Configure for default video standard */
-	err = adv7393_setoutput(sd, state->output);
-	if (err < 0) {
-		v4l2_err(sd, "Error setting output during init\n");
-		return -EINVAL;
-	}
-
-	err = adv7393_setstd(sd, state->std);
-	if (err < 0) {
-		v4l2_err(sd, "Error setting std during init\n");
-		return -EINVAL;
-	}
-
-	return err;
-}
-
-static int adv7393_probe(struct i2c_client *client,
-				const struct i2c_device_id *id)
-{
-	struct adv7393_state *state;
-	int err;
-
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -ENODEV;
-
-	v4l_info(client, "chip found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	state = kzalloc(sizeof(struct adv7393_state), GFP_KERNEL);
-	if (state == NULL)
-		return -ENOMEM;
-
-	state->reg00	= ADV7393_POWER_MODE_REG_DEFAULT;
-	state->reg01	= 0x00;
-	state->reg02	= 0x20;
-	state->reg35	= ADV7393_HD_MODE_REG6_DEFAULT;
-	state->reg80	= ADV7393_SD_MODE_REG1_DEFAULT;
-	state->reg82	= ADV7393_SD_MODE_REG2_DEFAULT;
-
-	state->output = ADV7393_COMPOSITE_ID;
-	state->std = V4L2_STD_NTSC;
-
-	v4l2_i2c_subdev_init(&state->sd, client, &adv7393_ops);
-
-	v4l2_ctrl_handler_init(&state->hdl, 3);
-	v4l2_ctrl_new_std(&state->hdl, &adv7393_ctrl_ops,
-			V4L2_CID_BRIGHTNESS, ADV7393_BRIGHTNESS_MIN,
-					     ADV7393_BRIGHTNESS_MAX, 1,
-					     ADV7393_BRIGHTNESS_DEF);
-	v4l2_ctrl_new_std(&state->hdl, &adv7393_ctrl_ops,
-			V4L2_CID_HUE, ADV7393_HUE_MIN,
-				      ADV7393_HUE_MAX, 1,
-				      ADV7393_HUE_DEF);
-	v4l2_ctrl_new_std(&state->hdl, &adv7393_ctrl_ops,
-			V4L2_CID_GAIN, ADV7393_GAIN_MIN,
-				       ADV7393_GAIN_MAX, 1,
-				       ADV7393_GAIN_DEF);
-	state->sd.ctrl_handler = &state->hdl;
-	if (state->hdl.error) {
-		int err = state->hdl.error;
-
-		v4l2_ctrl_handler_free(&state->hdl);
-		kfree(state);
-		return err;
-	}
-	v4l2_ctrl_handler_setup(&state->hdl);
-
-	err = adv7393_initialize(&state->sd);
-	if (err) {
-		v4l2_ctrl_handler_free(&state->hdl);
-		kfree(state);
-	}
-	return err;
-}
-
-static int adv7393_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct adv7393_state *state = to_state(sd);
-
-	v4l2_device_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(&state->hdl);
-	kfree(state);
-
-	return 0;
-}
-
-static const struct i2c_device_id adv7393_id[] = {
-	{"adv7393", 0},
-	{},
-};
-MODULE_DEVICE_TABLE(i2c, adv7393_id);
-
-static struct i2c_driver adv7393_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "adv7393",
-	},
-	.probe		= adv7393_probe,
-	.remove		= adv7393_remove,
-	.id_table	= adv7393_id,
-};
-module_i2c_driver(adv7393_driver);
diff --git a/drivers/media/video/adv7393_regs.h b/drivers/media/video/adv7393_regs.h
deleted file mode 100644
index 7896833..0000000
--- a/drivers/media/video/adv7393_regs.h
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * ADV7393 encoder related structure and register definitions
- *
- * Copyright (C) 2010-2012 ADVANSEE - http://www.advansee.com/
- * Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
- *
- * Based on ADV7343 driver,
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed .as is. WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef ADV7393_REGS_H
-#define ADV7393_REGS_H
-
-struct adv7393_std_info {
-	u32 standard_val3;
-	u32 fsc_val;
-	v4l2_std_id stdid;
-};
-
-/* Register offset macros */
-#define ADV7393_POWER_MODE_REG		(0x00)
-#define ADV7393_MODE_SELECT_REG		(0x01)
-#define ADV7393_MODE_REG0		(0x02)
-
-#define ADV7393_DAC123_OUTPUT_LEVEL	(0x0B)
-
-#define ADV7393_SOFT_RESET		(0x17)
-
-#define ADV7393_HD_MODE_REG1		(0x30)
-#define ADV7393_HD_MODE_REG2		(0x31)
-#define ADV7393_HD_MODE_REG3		(0x32)
-#define ADV7393_HD_MODE_REG4		(0x33)
-#define ADV7393_HD_MODE_REG5		(0x34)
-#define ADV7393_HD_MODE_REG6		(0x35)
-
-#define ADV7393_HD_MODE_REG7		(0x39)
-
-#define ADV7393_SD_MODE_REG1		(0x80)
-#define ADV7393_SD_MODE_REG2		(0x82)
-#define ADV7393_SD_MODE_REG3		(0x83)
-#define ADV7393_SD_MODE_REG4		(0x84)
-#define ADV7393_SD_MODE_REG5		(0x86)
-#define ADV7393_SD_MODE_REG6		(0x87)
-#define ADV7393_SD_MODE_REG7		(0x88)
-#define ADV7393_SD_MODE_REG8		(0x89)
-
-#define ADV7393_SD_TIMING_REG0		(0x8A)
-
-#define ADV7393_FSC_REG0		(0x8C)
-#define ADV7393_FSC_REG1		(0x8D)
-#define ADV7393_FSC_REG2		(0x8E)
-#define ADV7393_FSC_REG3		(0x8F)
-
-#define ADV7393_SD_CGMS_WSS0		(0x99)
-
-#define ADV7393_SD_HUE_ADJUST		(0xA0)
-#define ADV7393_SD_BRIGHTNESS_WSS	(0xA1)
-
-/* Default values for the registers */
-#define ADV7393_POWER_MODE_REG_DEFAULT		(0x10)
-#define ADV7393_HD_MODE_REG1_DEFAULT		(0x3C)	/* Changed Default
-							   720p EAV/SAV code*/
-#define ADV7393_HD_MODE_REG2_DEFAULT		(0x01)	/* Changed Pixel data
-							   valid */
-#define ADV7393_HD_MODE_REG3_DEFAULT		(0x00)	/* Color delay 0 clks */
-#define ADV7393_HD_MODE_REG4_DEFAULT		(0xEC)	/* Changed */
-#define ADV7393_HD_MODE_REG5_DEFAULT		(0x08)
-#define ADV7393_HD_MODE_REG6_DEFAULT		(0x00)
-#define ADV7393_HD_MODE_REG7_DEFAULT		(0x00)
-#define ADV7393_SOFT_RESET_DEFAULT		(0x02)
-#define ADV7393_COMPOSITE_POWER_VALUE		(0x10)
-#define ADV7393_COMPONENT_POWER_VALUE		(0x1C)
-#define ADV7393_SVIDEO_POWER_VALUE		(0x0C)
-#define ADV7393_SD_HUE_ADJUST_DEFAULT		(0x80)
-#define ADV7393_SD_BRIGHTNESS_WSS_DEFAULT	(0x00)
-
-#define ADV7393_SD_CGMS_WSS0_DEFAULT		(0x10)
-
-#define ADV7393_SD_MODE_REG1_DEFAULT		(0x10)
-#define ADV7393_SD_MODE_REG2_DEFAULT		(0xC9)
-#define ADV7393_SD_MODE_REG3_DEFAULT		(0x00)
-#define ADV7393_SD_MODE_REG4_DEFAULT		(0x00)
-#define ADV7393_SD_MODE_REG5_DEFAULT		(0x02)
-#define ADV7393_SD_MODE_REG6_DEFAULT		(0x8C)
-#define ADV7393_SD_MODE_REG7_DEFAULT		(0x14)
-#define ADV7393_SD_MODE_REG8_DEFAULT		(0x00)
-
-#define ADV7393_SD_TIMING_REG0_DEFAULT		(0x0C)
-
-/* Bit masks for Mode Select Register */
-#define INPUT_MODE_MASK			(0x70)
-#define SD_INPUT_MODE			(0x00)
-#define HD_720P_INPUT_MODE		(0x10)
-#define HD_1080I_INPUT_MODE		(0x10)
-
-/* Bit masks for Mode Register 0 */
-#define TEST_PATTERN_BLACK_BAR_EN	(0x04)
-#define YUV_OUTPUT_SELECT		(0x20)
-#define RGB_OUTPUT_SELECT		(0xDF)
-
-/* Bit masks for SD brightness/WSS */
-#define SD_BRIGHTNESS_VALUE_MASK	(0x7F)
-#define SD_BLANK_WSS_DATA_MASK		(0x80)
-
-/* Bit masks for soft reset register */
-#define SOFT_RESET			(0x02)
-
-/* Bit masks for HD Mode Register 1 */
-#define OUTPUT_STD_MASK		(0x03)
-#define OUTPUT_STD_SHIFT	(0)
-#define OUTPUT_STD_EIA0_2	(0x00)
-#define OUTPUT_STD_EIA0_1	(0x01)
-#define OUTPUT_STD_FULL		(0x02)
-#define EMBEDDED_SYNC		(0x04)
-#define EXTERNAL_SYNC		(0xFB)
-#define STD_MODE_MASK		(0x1F)
-#define STD_MODE_SHIFT		(3)
-#define STD_MODE_720P		(0x05)
-#define STD_MODE_720P_25	(0x08)
-#define STD_MODE_720P_30	(0x07)
-#define STD_MODE_720P_50	(0x06)
-#define STD_MODE_1080I		(0x0D)
-#define STD_MODE_1080I_25	(0x0E)
-#define STD_MODE_1080P_24	(0x11)
-#define STD_MODE_1080P_25	(0x10)
-#define STD_MODE_1080P_30	(0x0F)
-#define STD_MODE_525P		(0x00)
-#define STD_MODE_625P		(0x03)
-
-/* Bit masks for SD Mode Register 1 */
-#define SD_STD_MASK		(0x03)
-#define SD_STD_NTSC		(0x00)
-#define SD_STD_PAL_BDGHI	(0x01)
-#define SD_STD_PAL_M		(0x02)
-#define SD_STD_PAL_N		(0x03)
-#define SD_LUMA_FLTR_MASK	(0x07)
-#define SD_LUMA_FLTR_SHIFT	(2)
-#define SD_CHROMA_FLTR_MASK	(0x07)
-#define SD_CHROMA_FLTR_SHIFT	(5)
-
-/* Bit masks for SD Mode Register 2 */
-#define SD_PRPB_SSAF_EN		(0x01)
-#define SD_PRPB_SSAF_DI		(0xFE)
-#define SD_DAC_OUT1_EN		(0x02)
-#define SD_DAC_OUT1_DI		(0xFD)
-#define SD_PEDESTAL_EN		(0x08)
-#define SD_PEDESTAL_DI		(0xF7)
-#define SD_SQUARE_PIXEL_EN	(0x10)
-#define SD_SQUARE_PIXEL_DI	(0xEF)
-#define SD_PIXEL_DATA_VALID	(0x40)
-#define SD_ACTIVE_EDGE_EN	(0x80)
-#define SD_ACTIVE_EDGE_DI	(0x7F)
-
-/* Bit masks for HD Mode Register 6 */
-#define HD_PRPB_SYNC_EN		(0x04)
-#define HD_PRPB_SYNC_DI		(0xFB)
-#define HD_DAC_SWAP_EN		(0x08)
-#define HD_DAC_SWAP_DI		(0xF7)
-#define HD_GAMMA_CURVE_A	(0xEF)
-#define HD_GAMMA_CURVE_B	(0x10)
-#define HD_GAMMA_EN		(0x20)
-#define HD_GAMMA_DI		(0xDF)
-#define HD_ADPT_FLTR_MODEA	(0xBF)
-#define HD_ADPT_FLTR_MODEB	(0x40)
-#define HD_ADPT_FLTR_EN		(0x80)
-#define HD_ADPT_FLTR_DI		(0x7F)
-
-#define ADV7393_BRIGHTNESS_MAX	(63)
-#define ADV7393_BRIGHTNESS_MIN	(-64)
-#define ADV7393_BRIGHTNESS_DEF	(0)
-#define ADV7393_HUE_MAX		(127)
-#define ADV7393_HUE_MIN		(-128)
-#define ADV7393_HUE_DEF		(0)
-#define ADV7393_GAIN_MAX	(64)
-#define ADV7393_GAIN_MIN	(-64)
-#define ADV7393_GAIN_DEF	(0)
-
-#endif
diff --git a/drivers/media/video/ak881x.c b/drivers/media/video/ak881x.c
deleted file mode 100644
index ba67465..0000000
--- a/drivers/media/video/ak881x.c
+++ /dev/null
@@ -1,359 +0,0 @@
-/*
- * Driver for AK8813 / AK8814 TV-ecoders from Asahi Kasei Microsystems Co., Ltd. (AKM)
- *
- * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/videodev2.h>
-#include <linux/module.h>
-
-#include <media/ak881x.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-device.h>
-
-#define AK881X_INTERFACE_MODE	0
-#define AK881X_VIDEO_PROCESS1	1
-#define AK881X_VIDEO_PROCESS2	2
-#define AK881X_VIDEO_PROCESS3	3
-#define AK881X_DAC_MODE		5
-#define AK881X_STATUS		0x24
-#define AK881X_DEVICE_ID	0x25
-#define AK881X_DEVICE_REVISION	0x26
-
-struct ak881x {
-	struct v4l2_subdev subdev;
-	struct ak881x_pdata *pdata;
-	unsigned int lines;
-	int id;	/* DEVICE_ID code V4L2_IDENT_AK881X code from v4l2-chip-ident.h */
-	char revision;	/* DEVICE_REVISION content */
-};
-
-static int reg_read(struct i2c_client *client, const u8 reg)
-{
-	return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int reg_write(struct i2c_client *client, const u8 reg,
-		     const u8 data)
-{
-	return i2c_smbus_write_byte_data(client, reg, data);
-}
-
-static int reg_set(struct i2c_client *client, const u8 reg,
-		   const u8 data, u8 mask)
-{
-	int ret = reg_read(client, reg);
-	if (ret < 0)
-		return ret;
-	return reg_write(client, reg, (ret & ~mask) | (data & mask));
-}
-
-static struct ak881x *to_ak881x(const struct i2c_client *client)
-{
-	return container_of(i2c_get_clientdata(client), struct ak881x, subdev);
-}
-
-static int ak881x_g_chip_ident(struct v4l2_subdev *sd,
-			       struct v4l2_dbg_chip_ident *id)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ak881x *ak881x = to_ak881x(client);
-
-	if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
-		return -EINVAL;
-
-	if (id->match.addr != client->addr)
-		return -ENODEV;
-
-	id->ident	= ak881x->id;
-	id->revision	= ak881x->revision;
-
-	return 0;
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int ak881x_g_register(struct v4l2_subdev *sd,
-			     struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x26)
-		return -EINVAL;
-
-	if (reg->match.addr != client->addr)
-		return -ENODEV;
-
-	reg->val = reg_read(client, reg->reg);
-
-	if (reg->val > 0xffff)
-		return -EIO;
-
-	return 0;
-}
-
-static int ak881x_s_register(struct v4l2_subdev *sd,
-			     struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0x26)
-		return -EINVAL;
-
-	if (reg->match.addr != client->addr)
-		return -ENODEV;
-
-	if (reg_write(client, reg->reg, reg->val) < 0)
-		return -EIO;
-
-	return 0;
-}
-#endif
-
-static int ak881x_try_g_mbus_fmt(struct v4l2_subdev *sd,
-				 struct v4l2_mbus_framefmt *mf)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ak881x *ak881x = to_ak881x(client);
-
-	v4l_bound_align_image(&mf->width, 0, 720, 2,
-			      &mf->height, 0, ak881x->lines, 1, 0);
-	mf->field	= V4L2_FIELD_INTERLACED;
-	mf->code	= V4L2_MBUS_FMT_YUYV8_2X8;
-	mf->colorspace	= V4L2_COLORSPACE_SMPTE170M;
-
-	return 0;
-}
-
-static int ak881x_s_mbus_fmt(struct v4l2_subdev *sd,
-			     struct v4l2_mbus_framefmt *mf)
-{
-	if (mf->field != V4L2_FIELD_INTERLACED ||
-	    mf->code != V4L2_MBUS_FMT_YUYV8_2X8)
-		return -EINVAL;
-
-	return ak881x_try_g_mbus_fmt(sd, mf);
-}
-
-static int ak881x_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned int index,
-				enum v4l2_mbus_pixelcode *code)
-{
-	if (index)
-		return -EINVAL;
-
-	*code = V4L2_MBUS_FMT_YUYV8_2X8;
-	return 0;
-}
-
-static int ak881x_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ak881x *ak881x = to_ak881x(client);
-
-	a->bounds.left			= 0;
-	a->bounds.top			= 0;
-	a->bounds.width			= 720;
-	a->bounds.height		= ak881x->lines;
-	a->defrect			= a->bounds;
-	a->type				= V4L2_BUF_TYPE_VIDEO_OUTPUT;
-	a->pixelaspect.numerator	= 1;
-	a->pixelaspect.denominator	= 1;
-
-	return 0;
-}
-
-static int ak881x_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ak881x *ak881x = to_ak881x(client);
-	u8 vp1;
-
-	if (std == V4L2_STD_NTSC_443) {
-		vp1 = 3;
-		ak881x->lines = 480;
-	} else if (std == V4L2_STD_PAL_M) {
-		vp1 = 5;
-		ak881x->lines = 480;
-	} else if (std == V4L2_STD_PAL_60) {
-		vp1 = 7;
-		ak881x->lines = 480;
-	} else if (std && !(std & ~V4L2_STD_PAL)) {
-		vp1 = 0xf;
-		ak881x->lines = 576;
-	} else if (std && !(std & ~V4L2_STD_NTSC)) {
-		vp1 = 0;
-		ak881x->lines = 480;
-	} else {
-		/* No SECAM or PAL_N/Nc supported */
-		return -EINVAL;
-	}
-
-	reg_set(client, AK881X_VIDEO_PROCESS1, vp1, 0xf);
-
-	return 0;
-}
-
-static int ak881x_s_stream(struct v4l2_subdev *sd, int enable)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ak881x *ak881x = to_ak881x(client);
-
-	if (enable) {
-		u8 dac;
-		/* For colour-bar testing set bit 6 of AK881X_VIDEO_PROCESS1 */
-		/* Default: composite output */
-		if (ak881x->pdata->flags & AK881X_COMPONENT)
-			dac = 3;
-		else
-			dac = 4;
-		/* Turn on the DAC(s) */
-		reg_write(client, AK881X_DAC_MODE, dac);
-		dev_dbg(&client->dev, "chip status 0x%x\n",
-			reg_read(client, AK881X_STATUS));
-	} else {
-		/* ...and clear bit 6 of AK881X_VIDEO_PROCESS1 here */
-		reg_write(client, AK881X_DAC_MODE, 0);
-		dev_dbg(&client->dev, "chip status 0x%x\n",
-			reg_read(client, AK881X_STATUS));
-	}
-
-	return 0;
-}
-
-static struct v4l2_subdev_core_ops ak881x_subdev_core_ops = {
-	.g_chip_ident	= ak881x_g_chip_ident,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.g_register	= ak881x_g_register,
-	.s_register	= ak881x_s_register,
-#endif
-};
-
-static struct v4l2_subdev_video_ops ak881x_subdev_video_ops = {
-	.s_mbus_fmt	= ak881x_s_mbus_fmt,
-	.g_mbus_fmt	= ak881x_try_g_mbus_fmt,
-	.try_mbus_fmt	= ak881x_try_g_mbus_fmt,
-	.cropcap	= ak881x_cropcap,
-	.enum_mbus_fmt	= ak881x_enum_mbus_fmt,
-	.s_std_output	= ak881x_s_std_output,
-	.s_stream	= ak881x_s_stream,
-};
-
-static struct v4l2_subdev_ops ak881x_subdev_ops = {
-	.core	= &ak881x_subdev_core_ops,
-	.video	= &ak881x_subdev_video_ops,
-};
-
-static int ak881x_probe(struct i2c_client *client,
-			const struct i2c_device_id *did)
-{
-	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
-	struct ak881x *ak881x;
-	u8 ifmode, data;
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
-		dev_warn(&adapter->dev,
-			 "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
-		return -EIO;
-	}
-
-	ak881x = kzalloc(sizeof(struct ak881x), GFP_KERNEL);
-	if (!ak881x)
-		return -ENOMEM;
-
-	v4l2_i2c_subdev_init(&ak881x->subdev, client, &ak881x_subdev_ops);
-
-	data = reg_read(client, AK881X_DEVICE_ID);
-
-	switch (data) {
-	case 0x13:
-		ak881x->id = V4L2_IDENT_AK8813;
-		break;
-	case 0x14:
-		ak881x->id = V4L2_IDENT_AK8814;
-		break;
-	default:
-		dev_err(&client->dev,
-			"No ak881x chip detected, register read %x\n", data);
-		kfree(ak881x);
-		return -ENODEV;
-	}
-
-	ak881x->revision = reg_read(client, AK881X_DEVICE_REVISION);
-	ak881x->pdata = client->dev.platform_data;
-
-	if (ak881x->pdata) {
-		if (ak881x->pdata->flags & AK881X_FIELD)
-			ifmode = 4;
-		else
-			ifmode = 0;
-
-		switch (ak881x->pdata->flags & AK881X_IF_MODE_MASK) {
-		case AK881X_IF_MODE_BT656:
-			ifmode |= 1;
-			break;
-		case AK881X_IF_MODE_MASTER:
-			ifmode |= 2;
-			break;
-		case AK881X_IF_MODE_SLAVE:
-		default:
-			break;
-		}
-
-		dev_dbg(&client->dev, "IF mode %x\n", ifmode);
-
-		/*
-		 * "Line Blanking No." seems to be the same as the number of
-		 * "black" lines on, e.g., SuperH VOU, whose default value of 20
-		 * "incidentally" matches ak881x' default
-		 */
-		reg_write(client, AK881X_INTERFACE_MODE, ifmode | (20 << 3));
-	}
-
-	/* Hardware default: NTSC-M */
-	ak881x->lines = 480;
-
-	dev_info(&client->dev, "Detected an ak881x chip ID %x, revision %x\n",
-		 data, ak881x->revision);
-
-	return 0;
-}
-
-static int ak881x_remove(struct i2c_client *client)
-{
-	struct ak881x *ak881x = to_ak881x(client);
-
-	v4l2_device_unregister_subdev(&ak881x->subdev);
-	kfree(ak881x);
-
-	return 0;
-}
-
-static const struct i2c_device_id ak881x_id[] = {
-	{ "ak8813", 0 },
-	{ "ak8814", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, ak881x_id);
-
-static struct i2c_driver ak881x_i2c_driver = {
-	.driver = {
-		.name = "ak881x",
-	},
-	.probe		= ak881x_probe,
-	.remove		= ak881x_remove,
-	.id_table	= ak881x_id,
-};
-
-module_i2c_driver(ak881x_i2c_driver);
-
-MODULE_DESCRIPTION("TV-output driver for ak8813/ak8814");
-MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/video/aptina-pll.c b/drivers/media/video/aptina-pll.c
deleted file mode 100644
index 8153a44..0000000
--- a/drivers/media/video/aptina-pll.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * Aptina Sensor PLL Configuration
- *
- * Copyright (C) 2012 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#include <linux/device.h>
-#include <linux/gcd.h>
-#include <linux/kernel.h>
-#include <linux/lcm.h>
-#include <linux/module.h>
-
-#include "aptina-pll.h"
-
-int aptina_pll_calculate(struct device *dev,
-			 const struct aptina_pll_limits *limits,
-			 struct aptina_pll *pll)
-{
-	unsigned int mf_min;
-	unsigned int mf_max;
-	unsigned int p1_min;
-	unsigned int p1_max;
-	unsigned int p1;
-	unsigned int div;
-
-	dev_dbg(dev, "PLL: ext clock %u pix clock %u\n",
-		pll->ext_clock, pll->pix_clock);
-
-	if (pll->ext_clock < limits->ext_clock_min ||
-	    pll->ext_clock > limits->ext_clock_max) {
-		dev_err(dev, "pll: invalid external clock frequency.\n");
-		return -EINVAL;
-	}
-
-	if (pll->pix_clock == 0 || pll->pix_clock > limits->pix_clock_max) {
-		dev_err(dev, "pll: invalid pixel clock frequency.\n");
-		return -EINVAL;
-	}
-
-	/* Compute the multiplier M and combined N*P1 divisor. */
-	div = gcd(pll->pix_clock, pll->ext_clock);
-	pll->m = pll->pix_clock / div;
-	div = pll->ext_clock / div;
-
-	/* We now have the smallest M and N*P1 values that will result in the
-	 * desired pixel clock frequency, but they might be out of the valid
-	 * range. Compute the factor by which we should multiply them given the
-	 * following constraints:
-	 *
-	 * - minimum/maximum multiplier
-	 * - minimum/maximum multiplier output clock frequency assuming the
-	 *   minimum/maximum N value
-	 * - minimum/maximum combined N*P1 divisor
-	 */
-	mf_min = DIV_ROUND_UP(limits->m_min, pll->m);
-	mf_min = max(mf_min, limits->out_clock_min /
-		     (pll->ext_clock / limits->n_min * pll->m));
-	mf_min = max(mf_min, limits->n_min * limits->p1_min / div);
-	mf_max = limits->m_max / pll->m;
-	mf_max = min(mf_max, limits->out_clock_max /
-		    (pll->ext_clock / limits->n_max * pll->m));
-	mf_max = min(mf_max, DIV_ROUND_UP(limits->n_max * limits->p1_max, div));
-
-	dev_dbg(dev, "pll: mf min %u max %u\n", mf_min, mf_max);
-	if (mf_min > mf_max) {
-		dev_err(dev, "pll: no valid combined N*P1 divisor.\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * We're looking for the highest acceptable P1 value for which a
-	 * multiplier factor MF exists that fulfills the following conditions:
-	 *
-	 * 1. p1 is in the [p1_min, p1_max] range given by the limits and is
-	 *    even
-	 * 2. mf is in the [mf_min, mf_max] range computed above
-	 * 3. div * mf is a multiple of p1, in order to compute
-	 *	n = div * mf / p1
-	 *	m = pll->m * mf
-	 * 4. the internal clock frequency, given by ext_clock / n, is in the
-	 *    [int_clock_min, int_clock_max] range given by the limits
-	 * 5. the output clock frequency, given by ext_clock / n * m, is in the
-	 *    [out_clock_min, out_clock_max] range given by the limits
-	 *
-	 * The first naive approach is to iterate over all p1 values acceptable
-	 * according to (1) and all mf values acceptable according to (2), and
-	 * stop at the first combination that fulfills (3), (4) and (5). This
-	 * has a O(n^2) complexity.
-	 *
-	 * Instead of iterating over all mf values in the [mf_min, mf_max] range
-	 * we can compute the mf increment between two acceptable values
-	 * according to (3) with
-	 *
-	 *	mf_inc = p1 / gcd(div, p1)			(6)
-	 *
-	 * and round the minimum up to the nearest multiple of mf_inc. This will
-	 * restrict the number of mf values to be checked.
-	 *
-	 * Furthermore, conditions (4) and (5) only restrict the range of
-	 * acceptable p1 and mf values by modifying the minimum and maximum
-	 * limits. (5) can be expressed as
-	 *
-	 *	ext_clock / (div * mf / p1) * m * mf >= out_clock_min
-	 *	ext_clock / (div * mf / p1) * m * mf <= out_clock_max
-	 *
-	 * or
-	 *
-	 *	p1 >= out_clock_min * div / (ext_clock * m)	(7)
-	 *	p1 <= out_clock_max * div / (ext_clock * m)
-	 *
-	 * Similarly, (4) can be expressed as
-	 *
-	 *	mf >= ext_clock * p1 / (int_clock_max * div)	(8)
-	 *	mf <= ext_clock * p1 / (int_clock_min * div)
-	 *
-	 * We can thus iterate over the restricted p1 range defined by the
-	 * combination of (1) and (7), and then compute the restricted mf range
-	 * defined by the combination of (2), (6) and (8). If the resulting mf
-	 * range is not empty, any value in the mf range is acceptable. We thus
-	 * select the mf lwoer bound and the corresponding p1 value.
-	 */
-	if (limits->p1_min == 0) {
-		dev_err(dev, "pll: P1 minimum value must be >0.\n");
-		return -EINVAL;
-	}
-
-	p1_min = max(limits->p1_min, DIV_ROUND_UP(limits->out_clock_min * div,
-		     pll->ext_clock * pll->m));
-	p1_max = min(limits->p1_max, limits->out_clock_max * div /
-		     (pll->ext_clock * pll->m));
-
-	for (p1 = p1_max & ~1; p1 >= p1_min; p1 -= 2) {
-		unsigned int mf_inc = p1 / gcd(div, p1);
-		unsigned int mf_high;
-		unsigned int mf_low;
-
-		mf_low = roundup(max(mf_min, DIV_ROUND_UP(pll->ext_clock * p1,
-					limits->int_clock_max * div)), mf_inc);
-		mf_high = min(mf_max, pll->ext_clock * p1 /
-			      (limits->int_clock_min * div));
-
-		if (mf_low > mf_high)
-			continue;
-
-		pll->n = div * mf_low / p1;
-		pll->m *= mf_low;
-		pll->p1 = p1;
-		dev_dbg(dev, "PLL: N %u M %u P1 %u\n", pll->n, pll->m, pll->p1);
-		return 0;
-	}
-
-	dev_err(dev, "pll: no valid N and P1 divisors found.\n");
-	return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(aptina_pll_calculate);
-
-MODULE_DESCRIPTION("Aptina PLL Helpers");
-MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/video/aptina-pll.h b/drivers/media/video/aptina-pll.h
deleted file mode 100644
index b370e34..0000000
--- a/drivers/media/video/aptina-pll.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Aptina Sensor PLL Configuration
- *
- * Copyright (C) 2012 Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef __APTINA_PLL_H
-#define __APTINA_PLL_H
-
-struct aptina_pll {
-	unsigned int ext_clock;
-	unsigned int pix_clock;
-
-	unsigned int n;
-	unsigned int m;
-	unsigned int p1;
-};
-
-struct aptina_pll_limits {
-	unsigned int ext_clock_min;
-	unsigned int ext_clock_max;
-	unsigned int int_clock_min;
-	unsigned int int_clock_max;
-	unsigned int out_clock_min;
-	unsigned int out_clock_max;
-	unsigned int pix_clock_max;
-
-	unsigned int n_min;
-	unsigned int n_max;
-	unsigned int m_min;
-	unsigned int m_max;
-	unsigned int p1_min;
-	unsigned int p1_max;
-};
-
-struct device;
-
-int aptina_pll_calculate(struct device *dev,
-			 const struct aptina_pll_limits *limits,
-			 struct aptina_pll *pll);
-
-#endif /* __APTINA_PLL_H */
diff --git a/drivers/media/video/as3645a.c b/drivers/media/video/as3645a.c
deleted file mode 100644
index c4b0357..0000000
--- a/drivers/media/video/as3645a.c
+++ /dev/null
@@ -1,888 +0,0 @@
-/*
- * drivers/media/video/as3645a.c - AS3645A and LM3555 flash controllers driver
- *
- * Copyright (C) 2008-2011 Nokia Corporation
- * Copyright (c) 2011, Intel Corporation.
- *
- * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- * TODO:
- * - Check hardware FSTROBE control when sensor driver add support for this
- *
- */
-
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-
-#include <media/as3645a.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-device.h>
-
-#define AS_TIMER_MS_TO_CODE(t)			(((t) - 100) / 50)
-#define AS_TIMER_CODE_TO_MS(c)			(50 * (c) + 100)
-
-/* Register definitions */
-
-/* Read-only Design info register: Reset state: xxxx 0001 */
-#define AS_DESIGN_INFO_REG			0x00
-#define AS_DESIGN_INFO_FACTORY(x)		(((x) >> 4))
-#define AS_DESIGN_INFO_MODEL(x)			((x) & 0x0f)
-
-/* Read-only Version control register: Reset state: 0000 0000
- * for first engineering samples
- */
-#define AS_VERSION_CONTROL_REG			0x01
-#define AS_VERSION_CONTROL_RFU(x)		(((x) >> 4))
-#define AS_VERSION_CONTROL_VERSION(x)		((x) & 0x0f)
-
-/* Read / Write	(Indicator and timer register): Reset state: 0000 1111 */
-#define AS_INDICATOR_AND_TIMER_REG		0x02
-#define AS_INDICATOR_AND_TIMER_TIMEOUT_SHIFT	0
-#define AS_INDICATOR_AND_TIMER_VREF_SHIFT	4
-#define AS_INDICATOR_AND_TIMER_INDICATOR_SHIFT	6
-
-/* Read / Write	(Current set register): Reset state: 0110 1001 */
-#define AS_CURRENT_SET_REG			0x03
-#define AS_CURRENT_ASSIST_LIGHT_SHIFT		0
-#define AS_CURRENT_LED_DET_ON			(1 << 3)
-#define AS_CURRENT_FLASH_CURRENT_SHIFT		4
-
-/* Read / Write	(Control register): Reset state: 1011 0100 */
-#define AS_CONTROL_REG				0x04
-#define AS_CONTROL_MODE_SETTING_SHIFT		0
-#define AS_CONTROL_STROBE_ON			(1 << 2)
-#define AS_CONTROL_OUT_ON			(1 << 3)
-#define AS_CONTROL_EXT_TORCH_ON			(1 << 4)
-#define AS_CONTROL_STROBE_TYPE_EDGE		(0 << 5)
-#define AS_CONTROL_STROBE_TYPE_LEVEL		(1 << 5)
-#define AS_CONTROL_COIL_PEAK_SHIFT		6
-
-/* Read only (D3 is read / write) (Fault and info): Reset state: 0000 x000 */
-#define AS_FAULT_INFO_REG			0x05
-#define AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT	(1 << 1)
-#define AS_FAULT_INFO_INDICATOR_LED		(1 << 2)
-#define AS_FAULT_INFO_LED_AMOUNT		(1 << 3)
-#define AS_FAULT_INFO_TIMEOUT			(1 << 4)
-#define AS_FAULT_INFO_OVER_TEMPERATURE		(1 << 5)
-#define AS_FAULT_INFO_SHORT_CIRCUIT		(1 << 6)
-#define AS_FAULT_INFO_OVER_VOLTAGE		(1 << 7)
-
-/* Boost register */
-#define AS_BOOST_REG				0x0d
-#define AS_BOOST_CURRENT_DISABLE		(0 << 0)
-#define AS_BOOST_CURRENT_ENABLE			(1 << 0)
-
-/* Password register is used to unlock boost register writing */
-#define AS_PASSWORD_REG				0x0f
-#define AS_PASSWORD_UNLOCK_VALUE		0x55
-
-enum as_mode {
-	AS_MODE_EXT_TORCH = 0 << AS_CONTROL_MODE_SETTING_SHIFT,
-	AS_MODE_INDICATOR = 1 << AS_CONTROL_MODE_SETTING_SHIFT,
-	AS_MODE_ASSIST = 2 << AS_CONTROL_MODE_SETTING_SHIFT,
-	AS_MODE_FLASH = 3 << AS_CONTROL_MODE_SETTING_SHIFT,
-};
-
-/*
- * struct as3645a
- *
- * @subdev:		V4L2 subdev
- * @pdata:		Flash platform data
- * @power_lock:		Protects power_count
- * @power_count:	Power reference count
- * @led_mode:		V4L2 flash LED mode
- * @timeout:		Flash timeout in microseconds
- * @flash_current:	Flash current (0=200mA ... 15=500mA). Maximum
- *			values are 400mA for two LEDs and 500mA for one LED.
- * @assist_current:	Torch/Assist light current (0=20mA, 1=40mA ... 7=160mA)
- * @indicator_current:	Indicator LED current (0=0mA, 1=2.5mA ... 4=10mA)
- * @strobe_source:	Flash strobe source (software or external)
- */
-struct as3645a {
-	struct v4l2_subdev subdev;
-	const struct as3645a_platform_data *pdata;
-
-	struct mutex power_lock;
-	int power_count;
-
-	/* Controls */
-	struct v4l2_ctrl_handler ctrls;
-
-	enum v4l2_flash_led_mode led_mode;
-	unsigned int timeout;
-	u8 flash_current;
-	u8 assist_current;
-	u8 indicator_current;
-	enum v4l2_flash_strobe_source strobe_source;
-};
-
-#define to_as3645a(sd) container_of(sd, struct as3645a, subdev)
-
-/* Return negative errno else zero on success */
-static int as3645a_write(struct as3645a *flash, u8 addr, u8 val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
-	int rval;
-
-	rval = i2c_smbus_write_byte_data(client, addr, val);
-
-	dev_dbg(&client->dev, "Write Addr:%02X Val:%02X %s\n", addr, val,
-		rval < 0 ? "fail" : "ok");
-
-	return rval;
-}
-
-/* Return negative errno else a data byte received from the device. */
-static int as3645a_read(struct as3645a *flash, u8 addr)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
-	int rval;
-
-	rval = i2c_smbus_read_byte_data(client, addr);
-
-	dev_dbg(&client->dev, "Read Addr:%02X Val:%02X %s\n", addr, rval,
-		rval < 0 ? "fail" : "ok");
-
-	return rval;
-}
-
-/* -----------------------------------------------------------------------------
- * Hardware configuration and trigger
- */
-
-/*
- * as3645a_set_config - Set flash configuration registers
- * @flash: The flash
- *
- * Configure the hardware with flash, assist and indicator currents, as well as
- * flash timeout.
- *
- * Return 0 on success, or a negative error code if an I2C communication error
- * occurred.
- */
-static int as3645a_set_config(struct as3645a *flash)
-{
-	int ret;
-	u8 val;
-
-	val = (flash->flash_current << AS_CURRENT_FLASH_CURRENT_SHIFT)
-	    | (flash->assist_current << AS_CURRENT_ASSIST_LIGHT_SHIFT)
-	    | AS_CURRENT_LED_DET_ON;
-
-	ret = as3645a_write(flash, AS_CURRENT_SET_REG, val);
-	if (ret < 0)
-		return ret;
-
-	val = AS_TIMER_MS_TO_CODE(flash->timeout / 1000)
-		    << AS_INDICATOR_AND_TIMER_TIMEOUT_SHIFT;
-
-	val |= (flash->pdata->vref << AS_INDICATOR_AND_TIMER_VREF_SHIFT)
-	    |  ((flash->indicator_current ? flash->indicator_current - 1 : 0)
-		 << AS_INDICATOR_AND_TIMER_INDICATOR_SHIFT);
-
-	return as3645a_write(flash, AS_INDICATOR_AND_TIMER_REG, val);
-}
-
-/*
- * as3645a_set_control - Set flash control register
- * @flash: The flash
- * @mode: Desired output mode
- * @on: Desired output state
- *
- * Configure the hardware with output mode and state.
- *
- * Return 0 on success, or a negative error code if an I2C communication error
- * occurred.
- */
-static int
-as3645a_set_control(struct as3645a *flash, enum as_mode mode, bool on)
-{
-	u8 reg;
-
-	/* Configure output parameters and operation mode. */
-	reg = (flash->pdata->peak << AS_CONTROL_COIL_PEAK_SHIFT)
-	    | (on ? AS_CONTROL_OUT_ON : 0)
-	    | mode;
-
-	if (flash->led_mode == V4L2_FLASH_LED_MODE_FLASH &&
-	    flash->strobe_source == V4L2_FLASH_STROBE_SOURCE_EXTERNAL) {
-		reg |= AS_CONTROL_STROBE_TYPE_LEVEL
-		    |  AS_CONTROL_STROBE_ON;
-	}
-
-	return as3645a_write(flash, AS_CONTROL_REG, reg);
-}
-
-/*
- * as3645a_set_output - Configure output and operation mode
- * @flash: Flash controller
- * @strobe: Strobe the flash (only valid in flash mode)
- *
- * Turn the LEDs output on/off and set the operation mode based on the current
- * parameters.
- *
- * The AS3645A can't control the indicator LED independently of the flash/torch
- * LED. If the flash controller is in V4L2_FLASH_LED_MODE_NONE mode, set the
- * chip to indicator mode. Otherwise set it to assist light (torch) or flash
- * mode.
- *
- * In indicator and assist modes, turn the output on/off based on the indicator
- * and torch currents. In software strobe flash mode, turn the output on/off
- * based on the strobe parameter.
- */
-static int as3645a_set_output(struct as3645a *flash, bool strobe)
-{
-	enum as_mode mode;
-	bool on;
-
-	switch (flash->led_mode) {
-	case V4L2_FLASH_LED_MODE_NONE:
-		on = flash->indicator_current != 0;
-		mode = AS_MODE_INDICATOR;
-		break;
-	case V4L2_FLASH_LED_MODE_TORCH:
-		on = true;
-		mode = AS_MODE_ASSIST;
-		break;
-	case V4L2_FLASH_LED_MODE_FLASH:
-		on = strobe;
-		mode = AS_MODE_FLASH;
-		break;
-	default:
-		BUG();
-	}
-
-	/* Configure output parameters and operation mode. */
-	return as3645a_set_control(flash, mode, on);
-}
-
-/* -----------------------------------------------------------------------------
- * V4L2 controls
- */
-
-static int as3645a_is_active(struct as3645a *flash)
-{
-	int ret;
-
-	ret = as3645a_read(flash, AS_CONTROL_REG);
-	return ret < 0 ? ret : !!(ret & AS_CONTROL_OUT_ON);
-}
-
-static int as3645a_read_fault(struct as3645a *flash)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
-	int rval;
-
-	/* NOTE: reading register clear fault status */
-	rval = as3645a_read(flash, AS_FAULT_INFO_REG);
-	if (rval < 0)
-		return rval;
-
-	if (rval & AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT)
-		dev_dbg(&client->dev, "Inductor Peak limit fault\n");
-
-	if (rval & AS_FAULT_INFO_INDICATOR_LED)
-		dev_dbg(&client->dev, "Indicator LED fault: "
-			"Short circuit or open loop\n");
-
-	dev_dbg(&client->dev, "%u connected LEDs\n",
-		rval & AS_FAULT_INFO_LED_AMOUNT ? 2 : 1);
-
-	if (rval & AS_FAULT_INFO_TIMEOUT)
-		dev_dbg(&client->dev, "Timeout fault\n");
-
-	if (rval & AS_FAULT_INFO_OVER_TEMPERATURE)
-		dev_dbg(&client->dev, "Over temperature fault\n");
-
-	if (rval & AS_FAULT_INFO_SHORT_CIRCUIT)
-		dev_dbg(&client->dev, "Short circuit fault\n");
-
-	if (rval & AS_FAULT_INFO_OVER_VOLTAGE)
-		dev_dbg(&client->dev, "Over voltage fault: "
-			"Indicates missing capacitor or open connection\n");
-
-	return rval;
-}
-
-static int as3645a_get_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct as3645a *flash =
-		container_of(ctrl->handler, struct as3645a, ctrls);
-	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
-	int value;
-
-	switch (ctrl->id) {
-	case V4L2_CID_FLASH_FAULT:
-		value = as3645a_read_fault(flash);
-		if (value < 0)
-			return value;
-
-		ctrl->cur.val = 0;
-		if (value & AS_FAULT_INFO_SHORT_CIRCUIT)
-			ctrl->cur.val |= V4L2_FLASH_FAULT_SHORT_CIRCUIT;
-		if (value & AS_FAULT_INFO_OVER_TEMPERATURE)
-			ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_TEMPERATURE;
-		if (value & AS_FAULT_INFO_TIMEOUT)
-			ctrl->cur.val |= V4L2_FLASH_FAULT_TIMEOUT;
-		if (value & AS_FAULT_INFO_OVER_VOLTAGE)
-			ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_VOLTAGE;
-		if (value & AS_FAULT_INFO_INDUCTOR_PEAK_LIMIT)
-			ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_CURRENT;
-		if (value & AS_FAULT_INFO_INDICATOR_LED)
-			ctrl->cur.val |= V4L2_FLASH_FAULT_INDICATOR;
-		break;
-
-	case V4L2_CID_FLASH_STROBE_STATUS:
-		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH) {
-			ctrl->cur.val = 0;
-			break;
-		}
-
-		value = as3645a_is_active(flash);
-		if (value < 0)
-			return value;
-
-		ctrl->cur.val = value;
-		break;
-	}
-
-	dev_dbg(&client->dev, "G_CTRL %08x:%d\n", ctrl->id, ctrl->cur.val);
-
-	return 0;
-}
-
-static int as3645a_set_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct as3645a *flash =
-		container_of(ctrl->handler, struct as3645a, ctrls);
-	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
-	int ret;
-
-	dev_dbg(&client->dev, "S_CTRL %08x:%d\n", ctrl->id, ctrl->val);
-
-	/* If a control that doesn't apply to the current mode is modified,
-	 * we store the value and return immediately. The setting will be
-	 * applied when the LED mode is changed. Otherwise we apply the setting
-	 * immediately.
-	 */
-
-	switch (ctrl->id) {
-	case V4L2_CID_FLASH_LED_MODE:
-		if (flash->indicator_current)
-			return -EBUSY;
-
-		ret = as3645a_set_config(flash);
-		if (ret < 0)
-			return ret;
-
-		flash->led_mode = ctrl->val;
-		return as3645a_set_output(flash, false);
-
-	case V4L2_CID_FLASH_STROBE_SOURCE:
-		flash->strobe_source = ctrl->val;
-
-		/* Applies to flash mode only. */
-		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
-			break;
-
-		return as3645a_set_output(flash, false);
-
-	case V4L2_CID_FLASH_STROBE:
-		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
-			return -EBUSY;
-
-		return as3645a_set_output(flash, true);
-
-	case V4L2_CID_FLASH_STROBE_STOP:
-		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
-			return -EBUSY;
-
-		return as3645a_set_output(flash, false);
-
-	case V4L2_CID_FLASH_TIMEOUT:
-		flash->timeout = ctrl->val;
-
-		/* Applies to flash mode only. */
-		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
-			break;
-
-		return as3645a_set_config(flash);
-
-	case V4L2_CID_FLASH_INTENSITY:
-		flash->flash_current = (ctrl->val - AS3645A_FLASH_INTENSITY_MIN)
-				     / AS3645A_FLASH_INTENSITY_STEP;
-
-		/* Applies to flash mode only. */
-		if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
-			break;
-
-		return as3645a_set_config(flash);
-
-	case V4L2_CID_FLASH_TORCH_INTENSITY:
-		flash->assist_current =
-			(ctrl->val - AS3645A_TORCH_INTENSITY_MIN)
-			/ AS3645A_TORCH_INTENSITY_STEP;
-
-		/* Applies to torch mode only. */
-		if (flash->led_mode != V4L2_FLASH_LED_MODE_TORCH)
-			break;
-
-		return as3645a_set_config(flash);
-
-	case V4L2_CID_FLASH_INDICATOR_INTENSITY:
-		if (flash->led_mode != V4L2_FLASH_LED_MODE_NONE)
-			return -EBUSY;
-
-		flash->indicator_current =
-			(ctrl->val - AS3645A_INDICATOR_INTENSITY_MIN)
-			/ AS3645A_INDICATOR_INTENSITY_STEP;
-
-		ret = as3645a_set_config(flash);
-		if (ret < 0)
-			return ret;
-
-		if ((ctrl->val == 0) == (ctrl->cur.val == 0))
-			break;
-
-		return as3645a_set_output(flash, false);
-	}
-
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops as3645a_ctrl_ops = {
-	.g_volatile_ctrl = as3645a_get_ctrl,
-	.s_ctrl = as3645a_set_ctrl,
-};
-
-/* -----------------------------------------------------------------------------
- * V4L2 subdev core operations
- */
-
-/* Put device into know state. */
-static int as3645a_setup(struct as3645a *flash)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
-	int ret;
-
-	/* clear errors */
-	ret = as3645a_read(flash, AS_FAULT_INFO_REG);
-	if (ret < 0)
-		return ret;
-
-	dev_dbg(&client->dev, "Fault info: %02x\n", ret);
-
-	ret = as3645a_set_config(flash);
-	if (ret < 0)
-		return ret;
-
-	ret = as3645a_set_output(flash, false);
-	if (ret < 0)
-		return ret;
-
-	/* read status */
-	ret = as3645a_read_fault(flash);
-	if (ret < 0)
-		return ret;
-
-	dev_dbg(&client->dev, "AS_INDICATOR_AND_TIMER_REG: %02x\n",
-		as3645a_read(flash, AS_INDICATOR_AND_TIMER_REG));
-	dev_dbg(&client->dev, "AS_CURRENT_SET_REG: %02x\n",
-		as3645a_read(flash, AS_CURRENT_SET_REG));
-	dev_dbg(&client->dev, "AS_CONTROL_REG: %02x\n",
-		as3645a_read(flash, AS_CONTROL_REG));
-
-	return ret & ~AS_FAULT_INFO_LED_AMOUNT ? -EIO : 0;
-}
-
-static int __as3645a_set_power(struct as3645a *flash, int on)
-{
-	int ret;
-
-	if (!on)
-		as3645a_set_control(flash, AS_MODE_EXT_TORCH, false);
-
-	if (flash->pdata->set_power) {
-		ret = flash->pdata->set_power(&flash->subdev, on);
-		if (ret < 0)
-			return ret;
-	}
-
-	if (!on)
-		return 0;
-
-	ret = as3645a_setup(flash);
-	if (ret < 0) {
-		if (flash->pdata->set_power)
-			flash->pdata->set_power(&flash->subdev, 0);
-	}
-
-	return ret;
-}
-
-static int as3645a_set_power(struct v4l2_subdev *sd, int on)
-{
-	struct as3645a *flash = to_as3645a(sd);
-	int ret = 0;
-
-	mutex_lock(&flash->power_lock);
-
-	if (flash->power_count == !on) {
-		ret = __as3645a_set_power(flash, !!on);
-		if (ret < 0)
-			goto done;
-	}
-
-	flash->power_count += on ? 1 : -1;
-	WARN_ON(flash->power_count < 0);
-
-done:
-	mutex_unlock(&flash->power_lock);
-	return ret;
-}
-
-static int as3645a_registered(struct v4l2_subdev *sd)
-{
-	struct as3645a *flash = to_as3645a(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	int rval, man, model, rfu, version;
-	const char *vendor;
-
-	/* Power up the flash driver and read manufacturer ID, model ID, RFU
-	 * and version.
-	 */
-	rval = as3645a_set_power(&flash->subdev, 1);
-	if (rval < 0)
-		return rval;
-
-	rval = as3645a_read(flash, AS_DESIGN_INFO_REG);
-	if (rval < 0)
-		goto power_off;
-
-	man = AS_DESIGN_INFO_FACTORY(rval);
-	model = AS_DESIGN_INFO_MODEL(rval);
-
-	rval = as3645a_read(flash, AS_VERSION_CONTROL_REG);
-	if (rval < 0)
-		goto power_off;
-
-	rfu = AS_VERSION_CONTROL_RFU(rval);
-	version = AS_VERSION_CONTROL_VERSION(rval);
-
-	/* Verify the chip model and version. */
-	if (model != 0x01 || rfu != 0x00) {
-		dev_err(&client->dev, "AS3645A not detected "
-			"(model %d rfu %d)\n", model, rfu);
-		rval = -ENODEV;
-		goto power_off;
-	}
-
-	switch (man) {
-	case 1:
-		vendor = "AMS, Austria Micro Systems";
-		break;
-	case 2:
-		vendor = "ADI, Analog Devices Inc.";
-		break;
-	case 3:
-		vendor = "NSC, National Semiconductor";
-		break;
-	case 4:
-		vendor = "NXP";
-		break;
-	case 5:
-		vendor = "TI, Texas Instrument";
-		break;
-	default:
-		vendor = "Unknown";
-	}
-
-	dev_info(&client->dev, "Chip vendor: %s (%d) Version: %d\n", vendor,
-		 man, version);
-
-	rval = as3645a_write(flash, AS_PASSWORD_REG, AS_PASSWORD_UNLOCK_VALUE);
-	if (rval < 0)
-		goto power_off;
-
-	rval = as3645a_write(flash, AS_BOOST_REG, AS_BOOST_CURRENT_DISABLE);
-	if (rval < 0)
-		goto power_off;
-
-	/* Setup default values. This makes sure that the chip is in a known
-	 * state, in case the power rail can't be controlled.
-	 */
-	rval = as3645a_setup(flash);
-
-power_off:
-	as3645a_set_power(&flash->subdev, 0);
-
-	return rval;
-}
-
-static int as3645a_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-{
-	return as3645a_set_power(sd, 1);
-}
-
-static int as3645a_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-{
-	return as3645a_set_power(sd, 0);
-}
-
-static const struct v4l2_subdev_core_ops as3645a_core_ops = {
-	.s_power		= as3645a_set_power,
-};
-
-static const struct v4l2_subdev_ops as3645a_ops = {
-	.core = &as3645a_core_ops,
-};
-
-static const struct v4l2_subdev_internal_ops as3645a_internal_ops = {
-	.registered = as3645a_registered,
-	.open = as3645a_open,
-	.close = as3645a_close,
-};
-
-/* -----------------------------------------------------------------------------
- *  I2C driver
- */
-#ifdef CONFIG_PM
-
-static int as3645a_suspend(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
-	struct as3645a *flash = to_as3645a(subdev);
-	int rval;
-
-	if (flash->power_count == 0)
-		return 0;
-
-	rval = __as3645a_set_power(flash, 0);
-
-	dev_dbg(&client->dev, "Suspend %s\n", rval < 0 ? "failed" : "ok");
-
-	return rval;
-}
-
-static int as3645a_resume(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
-	struct as3645a *flash = to_as3645a(subdev);
-	int rval;
-
-	if (flash->power_count == 0)
-		return 0;
-
-	rval = __as3645a_set_power(flash, 1);
-
-	dev_dbg(&client->dev, "Resume %s\n", rval < 0 ? "fail" : "ok");
-
-	return rval;
-}
-
-#else
-
-#define as3645a_suspend	NULL
-#define as3645a_resume	NULL
-
-#endif /* CONFIG_PM */
-
-/*
- * as3645a_init_controls - Create controls
- * @flash: The flash
- *
- * The number of LEDs reported in platform data is used to compute default
- * limits. Parameters passed through platform data can override those limits.
- */
-static int __devinit as3645a_init_controls(struct as3645a *flash)
-{
-	const struct as3645a_platform_data *pdata = flash->pdata;
-	struct v4l2_ctrl *ctrl;
-	int maximum;
-
-	v4l2_ctrl_handler_init(&flash->ctrls, 10);
-
-	/* V4L2_CID_FLASH_LED_MODE */
-	v4l2_ctrl_new_std_menu(&flash->ctrls, &as3645a_ctrl_ops,
-			       V4L2_CID_FLASH_LED_MODE, 2, ~7,
-			       V4L2_FLASH_LED_MODE_NONE);
-
-	/* V4L2_CID_FLASH_STROBE_SOURCE */
-	v4l2_ctrl_new_std_menu(&flash->ctrls, &as3645a_ctrl_ops,
-			       V4L2_CID_FLASH_STROBE_SOURCE,
-			       pdata->ext_strobe ? 1 : 0,
-			       pdata->ext_strobe ? ~3 : ~1,
-			       V4L2_FLASH_STROBE_SOURCE_SOFTWARE);
-
-	flash->strobe_source = V4L2_FLASH_STROBE_SOURCE_SOFTWARE;
-
-	/* V4L2_CID_FLASH_STROBE */
-	v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
-			  V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
-
-	/* V4L2_CID_FLASH_STROBE_STOP */
-	v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
-			  V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
-
-	/* V4L2_CID_FLASH_STROBE_STATUS */
-	ctrl = v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
-				 V4L2_CID_FLASH_STROBE_STATUS, 0, 1, 1, 1);
-	if (ctrl != NULL)
-		ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
-
-	/* V4L2_CID_FLASH_TIMEOUT */
-	maximum = pdata->timeout_max;
-
-	v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
-			  V4L2_CID_FLASH_TIMEOUT, AS3645A_FLASH_TIMEOUT_MIN,
-			  maximum, AS3645A_FLASH_TIMEOUT_STEP, maximum);
-
-	flash->timeout = maximum;
-
-	/* V4L2_CID_FLASH_INTENSITY */
-	maximum = pdata->flash_max_current;
-
-	v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
-			  V4L2_CID_FLASH_INTENSITY, AS3645A_FLASH_INTENSITY_MIN,
-			  maximum, AS3645A_FLASH_INTENSITY_STEP, maximum);
-
-	flash->flash_current = (maximum - AS3645A_FLASH_INTENSITY_MIN)
-			     / AS3645A_FLASH_INTENSITY_STEP;
-
-	/* V4L2_CID_FLASH_TORCH_INTENSITY */
-	maximum = pdata->torch_max_current;
-
-	v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
-			  V4L2_CID_FLASH_TORCH_INTENSITY,
-			  AS3645A_TORCH_INTENSITY_MIN, maximum,
-			  AS3645A_TORCH_INTENSITY_STEP,
-			  AS3645A_TORCH_INTENSITY_MIN);
-
-	flash->assist_current = 0;
-
-	/* V4L2_CID_FLASH_INDICATOR_INTENSITY */
-	v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
-			  V4L2_CID_FLASH_INDICATOR_INTENSITY,
-			  AS3645A_INDICATOR_INTENSITY_MIN,
-			  AS3645A_INDICATOR_INTENSITY_MAX,
-			  AS3645A_INDICATOR_INTENSITY_STEP,
-			  AS3645A_INDICATOR_INTENSITY_MIN);
-
-	flash->indicator_current = 0;
-
-	/* V4L2_CID_FLASH_FAULT */
-	ctrl = v4l2_ctrl_new_std(&flash->ctrls, &as3645a_ctrl_ops,
-				 V4L2_CID_FLASH_FAULT, 0,
-				 V4L2_FLASH_FAULT_OVER_VOLTAGE |
-				 V4L2_FLASH_FAULT_TIMEOUT |
-				 V4L2_FLASH_FAULT_OVER_TEMPERATURE |
-				 V4L2_FLASH_FAULT_SHORT_CIRCUIT, 0, 0);
-	if (ctrl != NULL)
-		ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
-
-	flash->subdev.ctrl_handler = &flash->ctrls;
-
-	return flash->ctrls.error;
-}
-
-static int __devinit as3645a_probe(struct i2c_client *client,
-				   const struct i2c_device_id *devid)
-{
-	struct as3645a *flash;
-	int ret;
-
-	if (client->dev.platform_data == NULL)
-		return -ENODEV;
-
-	flash = kzalloc(sizeof(*flash), GFP_KERNEL);
-	if (flash == NULL)
-		return -ENOMEM;
-
-	flash->pdata = client->dev.platform_data;
-
-	v4l2_i2c_subdev_init(&flash->subdev, client, &as3645a_ops);
-	flash->subdev.internal_ops = &as3645a_internal_ops;
-	flash->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
-
-	ret = as3645a_init_controls(flash);
-	if (ret < 0)
-		goto done;
-
-	ret = media_entity_init(&flash->subdev.entity, 0, NULL, 0);
-	if (ret < 0)
-		goto done;
-
-	flash->subdev.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH;
-
-	mutex_init(&flash->power_lock);
-
-	flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
-
-done:
-	if (ret < 0) {
-		v4l2_ctrl_handler_free(&flash->ctrls);
-		kfree(flash);
-	}
-
-	return ret;
-}
-
-static int __devexit as3645a_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
-	struct as3645a *flash = to_as3645a(subdev);
-
-	v4l2_device_unregister_subdev(subdev);
-	v4l2_ctrl_handler_free(&flash->ctrls);
-	media_entity_cleanup(&flash->subdev.entity);
-	mutex_destroy(&flash->power_lock);
-	kfree(flash);
-
-	return 0;
-}
-
-static const struct i2c_device_id as3645a_id_table[] = {
-	{ AS3645A_NAME, 0 },
-	{ },
-};
-MODULE_DEVICE_TABLE(i2c, as3645a_id_table);
-
-static const struct dev_pm_ops as3645a_pm_ops = {
-	.suspend = as3645a_suspend,
-	.resume = as3645a_resume,
-};
-
-static struct i2c_driver as3645a_i2c_driver = {
-	.driver	= {
-		.name = AS3645A_NAME,
-		.pm   = &as3645a_pm_ops,
-	},
-	.probe	= as3645a_probe,
-	.remove	= __devexit_p(as3645a_remove),
-	.id_table = as3645a_id_table,
-};
-
-module_i2c_driver(as3645a_i2c_driver);
-
-MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
-MODULE_DESCRIPTION("LED flash driver for AS3645A, LM3555 and their clones");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c
deleted file mode 100644
index 377bf05..0000000
--- a/drivers/media/video/bt819.c
+++ /dev/null
@@ -1,517 +0,0 @@
-/*
- *  bt819 - BT819A VideoStream Decoder (Rockwell Part)
- *
- * Copyright (C) 1999 Mike Bernson <mike@mlb.org>
- * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
- *
- * Modifications for LML33/DC10plus unified driver
- * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
- *
- * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net>
- *    - moved over to linux>=2.4.x i2c protocol (9/9/2002)
- *
- * This code was modify/ported from the saa7111 driver written
- * by Dave Perks.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/ioctl.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <linux/slab.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-ctrls.h>
-#include <media/bt819.h>
-
-MODULE_DESCRIPTION("Brooktree-819 video decoder driver");
-MODULE_AUTHOR("Mike Bernson & Dave Perks");
-MODULE_LICENSE("GPL");
-
-static int debug;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
-
-
-/* ----------------------------------------------------------------------- */
-
-struct bt819 {
-	struct v4l2_subdev sd;
-	struct v4l2_ctrl_handler hdl;
-	unsigned char reg[32];
-
-	v4l2_std_id norm;
-	int ident;
-	int input;
-	int enable;
-};
-
-static inline struct bt819 *to_bt819(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct bt819, sd);
-}
-
-static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
-{
-	return &container_of(ctrl->handler, struct bt819, hdl)->sd;
-}
-
-struct timing {
-	int hactive;
-	int hdelay;
-	int vactive;
-	int vdelay;
-	int hscale;
-	int vscale;
-};
-
-/* for values, see the bt819 datasheet */
-static struct timing timing_data[] = {
-	{864 - 24, 20, 625 - 2, 1, 0x0504, 0x0000},
-	{858 - 24, 20, 525 - 2, 1, 0x00f8, 0x0000},
-};
-
-/* ----------------------------------------------------------------------- */
-
-static inline int bt819_write(struct bt819 *decoder, u8 reg, u8 value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&decoder->sd);
-
-	decoder->reg[reg] = value;
-	return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-static inline int bt819_setbit(struct bt819 *decoder, u8 reg, u8 bit, u8 value)
-{
-	return bt819_write(decoder, reg,
-		(decoder->reg[reg] & ~(1 << bit)) | (value ? (1 << bit) : 0));
-}
-
-static int bt819_write_block(struct bt819 *decoder, const u8 *data, unsigned int len)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&decoder->sd);
-	int ret = -1;
-	u8 reg;
-
-	/* the bt819 has an autoincrement function, use it if
-	 * the adapter understands raw I2C */
-	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
-		/* do raw I2C, not smbus compatible */
-		u8 block_data[32];
-		int block_len;
-
-		while (len >= 2) {
-			block_len = 0;
-			block_data[block_len++] = reg = data[0];
-			do {
-				block_data[block_len++] =
-				    decoder->reg[reg++] = data[1];
-				len -= 2;
-				data += 2;
-			} while (len >= 2 && data[0] == reg && block_len < 32);
-			ret = i2c_master_send(client, block_data, block_len);
-			if (ret < 0)
-				break;
-		}
-	} else {
-		/* do some slow I2C emulation kind of thing */
-		while (len >= 2) {
-			reg = *data++;
-			ret = bt819_write(decoder, reg, *data++);
-			if (ret < 0)
-				break;
-			len -= 2;
-		}
-	}
-
-	return ret;
-}
-
-static inline int bt819_read(struct bt819 *decoder, u8 reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&decoder->sd);
-
-	return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int bt819_init(struct v4l2_subdev *sd)
-{
-	static unsigned char init[] = {
-		/*0x1f, 0x00,*/     /* Reset */
-		0x01, 0x59,	/* 0x01 input format */
-		0x02, 0x00,	/* 0x02 temporal decimation */
-		0x03, 0x12,	/* 0x03 Cropping msb */
-		0x04, 0x16,	/* 0x04 Vertical Delay, lsb */
-		0x05, 0xe0,	/* 0x05 Vertical Active lsb */
-		0x06, 0x80,	/* 0x06 Horizontal Delay lsb */
-		0x07, 0xd0,	/* 0x07 Horizontal Active lsb */
-		0x08, 0x00,	/* 0x08 Horizontal Scaling msb */
-		0x09, 0xf8,	/* 0x09 Horizontal Scaling lsb */
-		0x0a, 0x00,	/* 0x0a Brightness control */
-		0x0b, 0x30,	/* 0x0b Miscellaneous control */
-		0x0c, 0xd8,	/* 0x0c Luma Gain lsb */
-		0x0d, 0xfe,	/* 0x0d Chroma Gain (U) lsb */
-		0x0e, 0xb4,	/* 0x0e Chroma Gain (V) msb */
-		0x0f, 0x00,	/* 0x0f Hue control */
-		0x12, 0x04,	/* 0x12 Output Format */
-		0x13, 0x20,	/* 0x13 Vertial Scaling msb 0x00
-					   chroma comb OFF, line drop scaling, interlace scaling
-					   BUG? Why does turning the chroma comb on fuck up color?
-					   Bug in the bt819 stepping on my board?
-					*/
-		0x14, 0x00,	/* 0x14 Vertial Scaling lsb */
-		0x16, 0x07,	/* 0x16 Video Timing Polarity
-					   ACTIVE=active low
-					   FIELD: high=odd,
-					   vreset=active high,
-					   hreset=active high */
-		0x18, 0x68,	/* 0x18 AGC Delay */
-		0x19, 0x5d,	/* 0x19 Burst Gate Delay */
-		0x1a, 0x80,	/* 0x1a ADC Interface */
-	};
-
-	struct bt819 *decoder = to_bt819(sd);
-	struct timing *timing = &timing_data[(decoder->norm & V4L2_STD_525_60) ? 1 : 0];
-
-	init[0x03 * 2 - 1] =
-	    (((timing->vdelay >> 8) & 0x03) << 6) |
-	    (((timing->vactive >> 8) & 0x03) << 4) |
-	    (((timing->hdelay >> 8) & 0x03) << 2) |
-	    ((timing->hactive >> 8) & 0x03);
-	init[0x04 * 2 - 1] = timing->vdelay & 0xff;
-	init[0x05 * 2 - 1] = timing->vactive & 0xff;
-	init[0x06 * 2 - 1] = timing->hdelay & 0xff;
-	init[0x07 * 2 - 1] = timing->hactive & 0xff;
-	init[0x08 * 2 - 1] = timing->hscale >> 8;
-	init[0x09 * 2 - 1] = timing->hscale & 0xff;
-	/* 0x15 in array is address 0x19 */
-	init[0x15 * 2 - 1] = (decoder->norm & V4L2_STD_625_50) ? 115 : 93;	/* Chroma burst delay */
-	/* reset */
-	bt819_write(decoder, 0x1f, 0x00);
-	mdelay(1);
-
-	/* init */
-	return bt819_write_block(decoder, init, sizeof(init));
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int bt819_status(struct v4l2_subdev *sd, u32 *pstatus, v4l2_std_id *pstd)
-{
-	struct bt819 *decoder = to_bt819(sd);
-	int status = bt819_read(decoder, 0x00);
-	int res = V4L2_IN_ST_NO_SIGNAL;
-	v4l2_std_id std;
-
-	if ((status & 0x80))
-		res = 0;
-
-	if ((status & 0x10))
-		std = V4L2_STD_PAL;
-	else
-		std = V4L2_STD_NTSC;
-	if (pstd)
-		*pstd = std;
-	if (pstatus)
-		*pstatus = res;
-
-	v4l2_dbg(1, debug, sd, "get status %x\n", status);
-	return 0;
-}
-
-static int bt819_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
-{
-	return bt819_status(sd, NULL, std);
-}
-
-static int bt819_g_input_status(struct v4l2_subdev *sd, u32 *status)
-{
-	return bt819_status(sd, status, NULL);
-}
-
-static int bt819_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct bt819 *decoder = to_bt819(sd);
-	struct timing *timing = NULL;
-
-	v4l2_dbg(1, debug, sd, "set norm %llx\n", (unsigned long long)std);
-
-	if (sd->v4l2_dev == NULL || sd->v4l2_dev->notify == NULL)
-		v4l2_err(sd, "no notify found!\n");
-
-	if (std & V4L2_STD_NTSC) {
-		v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, NULL);
-		bt819_setbit(decoder, 0x01, 0, 1);
-		bt819_setbit(decoder, 0x01, 1, 0);
-		bt819_setbit(decoder, 0x01, 5, 0);
-		bt819_write(decoder, 0x18, 0x68);
-		bt819_write(decoder, 0x19, 0x5d);
-		/* bt819_setbit(decoder, 0x1a,  5, 1); */
-		timing = &timing_data[1];
-	} else if (std & V4L2_STD_PAL) {
-		v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, NULL);
-		bt819_setbit(decoder, 0x01, 0, 1);
-		bt819_setbit(decoder, 0x01, 1, 1);
-		bt819_setbit(decoder, 0x01, 5, 1);
-		bt819_write(decoder, 0x18, 0x7f);
-		bt819_write(decoder, 0x19, 0x72);
-		/* bt819_setbit(decoder, 0x1a,  5, 0); */
-		timing = &timing_data[0];
-	} else {
-		v4l2_dbg(1, debug, sd, "unsupported norm %llx\n",
-				(unsigned long long)std);
-		return -EINVAL;
-	}
-	bt819_write(decoder, 0x03,
-			(((timing->vdelay >> 8) & 0x03) << 6) |
-			(((timing->vactive >> 8) & 0x03) << 4) |
-			(((timing->hdelay >> 8) & 0x03) << 2) |
-			((timing->hactive >> 8) & 0x03));
-	bt819_write(decoder, 0x04, timing->vdelay & 0xff);
-	bt819_write(decoder, 0x05, timing->vactive & 0xff);
-	bt819_write(decoder, 0x06, timing->hdelay & 0xff);
-	bt819_write(decoder, 0x07, timing->hactive & 0xff);
-	bt819_write(decoder, 0x08, (timing->hscale >> 8) & 0xff);
-	bt819_write(decoder, 0x09, timing->hscale & 0xff);
-	decoder->norm = std;
-	v4l2_subdev_notify(sd, BT819_FIFO_RESET_HIGH, NULL);
-	return 0;
-}
-
-static int bt819_s_routing(struct v4l2_subdev *sd,
-			   u32 input, u32 output, u32 config)
-{
-	struct bt819 *decoder = to_bt819(sd);
-
-	v4l2_dbg(1, debug, sd, "set input %x\n", input);
-
-	if (input > 7)
-		return -EINVAL;
-
-	if (sd->v4l2_dev == NULL || sd->v4l2_dev->notify == NULL)
-		v4l2_err(sd, "no notify found!\n");
-
-	if (decoder->input != input) {
-		v4l2_subdev_notify(sd, BT819_FIFO_RESET_LOW, NULL);
-		decoder->input = input;
-		/* select mode */
-		if (decoder->input == 0) {
-			bt819_setbit(decoder, 0x0b, 6, 0);
-			bt819_setbit(decoder, 0x1a, 1, 1);
-		} else {
-			bt819_setbit(decoder, 0x0b, 6, 1);
-			bt819_setbit(decoder, 0x1a, 1, 0);
-		}
-		v4l2_subdev_notify(sd, BT819_FIFO_RESET_HIGH, NULL);
-	}
-	return 0;
-}
-
-static int bt819_s_stream(struct v4l2_subdev *sd, int enable)
-{
-	struct bt819 *decoder = to_bt819(sd);
-
-	v4l2_dbg(1, debug, sd, "enable output %x\n", enable);
-
-	if (decoder->enable != enable) {
-		decoder->enable = enable;
-		bt819_setbit(decoder, 0x16, 7, !enable);
-	}
-	return 0;
-}
-
-static int bt819_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-	struct bt819 *decoder = to_bt819(sd);
-	int temp;
-
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		bt819_write(decoder, 0x0a, ctrl->val);
-		break;
-
-	case V4L2_CID_CONTRAST:
-		bt819_write(decoder, 0x0c, ctrl->val & 0xff);
-		bt819_setbit(decoder, 0x0b, 2, ((ctrl->val >> 8) & 0x01));
-		break;
-
-	case V4L2_CID_SATURATION:
-		bt819_write(decoder, 0x0d, (ctrl->val >> 7) & 0xff);
-		bt819_setbit(decoder, 0x0b, 1, ((ctrl->val >> 15) & 0x01));
-
-		/* Ratio between U gain and V gain must stay the same as
-		   the ratio between the default U and V gain values. */
-		temp = (ctrl->val * 180) / 254;
-		bt819_write(decoder, 0x0e, (temp >> 7) & 0xff);
-		bt819_setbit(decoder, 0x0b, 0, (temp >> 15) & 0x01);
-		break;
-
-	case V4L2_CID_HUE:
-		bt819_write(decoder, 0x0f, ctrl->val);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int bt819_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct bt819 *decoder = to_bt819(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, decoder->ident, 0);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_ctrl_ops bt819_ctrl_ops = {
-	.s_ctrl = bt819_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops bt819_core_ops = {
-	.g_chip_ident = bt819_g_chip_ident,
-	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
-	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
-	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
-	.g_ctrl = v4l2_subdev_g_ctrl,
-	.s_ctrl = v4l2_subdev_s_ctrl,
-	.queryctrl = v4l2_subdev_queryctrl,
-	.querymenu = v4l2_subdev_querymenu,
-	.s_std = bt819_s_std,
-};
-
-static const struct v4l2_subdev_video_ops bt819_video_ops = {
-	.s_routing = bt819_s_routing,
-	.s_stream = bt819_s_stream,
-	.querystd = bt819_querystd,
-	.g_input_status = bt819_g_input_status,
-};
-
-static const struct v4l2_subdev_ops bt819_ops = {
-	.core = &bt819_core_ops,
-	.video = &bt819_video_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static int bt819_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	int i, ver;
-	struct bt819 *decoder;
-	struct v4l2_subdev *sd;
-	const char *name;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -ENODEV;
-
-	decoder = kzalloc(sizeof(struct bt819), GFP_KERNEL);
-	if (decoder == NULL)
-		return -ENOMEM;
-	sd = &decoder->sd;
-	v4l2_i2c_subdev_init(sd, client, &bt819_ops);
-
-	ver = bt819_read(decoder, 0x17);
-	switch (ver & 0xf0) {
-	case 0x70:
-		name = "bt819a";
-		decoder->ident = V4L2_IDENT_BT819A;
-		break;
-	case 0x60:
-		name = "bt817a";
-		decoder->ident = V4L2_IDENT_BT817A;
-		break;
-	case 0x20:
-		name = "bt815a";
-		decoder->ident = V4L2_IDENT_BT815A;
-		break;
-	default:
-		v4l2_dbg(1, debug, sd,
-			"unknown chip version 0x%02x\n", ver);
-		return -ENODEV;
-	}
-
-	v4l_info(client, "%s found @ 0x%x (%s)\n", name,
-			client->addr << 1, client->adapter->name);
-
-	decoder->norm = V4L2_STD_NTSC;
-	decoder->input = 0;
-	decoder->enable = 1;
-
-	i = bt819_init(sd);
-	if (i < 0)
-		v4l2_dbg(1, debug, sd, "init status %d\n", i);
-
-	v4l2_ctrl_handler_init(&decoder->hdl, 4);
-	v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops,
-			V4L2_CID_BRIGHTNESS, -128, 127, 1, 0);
-	v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops,
-			V4L2_CID_CONTRAST, 0, 511, 1, 0xd8);
-	v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops,
-			V4L2_CID_SATURATION, 0, 511, 1, 0xfe);
-	v4l2_ctrl_new_std(&decoder->hdl, &bt819_ctrl_ops,
-			V4L2_CID_HUE, -128, 127, 1, 0);
-	sd->ctrl_handler = &decoder->hdl;
-	if (decoder->hdl.error) {
-		int err = decoder->hdl.error;
-
-		v4l2_ctrl_handler_free(&decoder->hdl);
-		kfree(decoder);
-		return err;
-	}
-	v4l2_ctrl_handler_setup(&decoder->hdl);
-	return 0;
-}
-
-static int bt819_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct bt819 *decoder = to_bt819(sd);
-
-	v4l2_device_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(&decoder->hdl);
-	kfree(decoder);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct i2c_device_id bt819_id[] = {
-	{ "bt819a", 0 },
-	{ "bt817a", 0 },
-	{ "bt815a", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, bt819_id);
-
-static struct i2c_driver bt819_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "bt819",
-	},
-	.probe		= bt819_probe,
-	.remove		= bt819_remove,
-	.id_table	= bt819_id,
-};
-
-module_i2c_driver(bt819_driver);
diff --git a/drivers/media/video/bt856.c b/drivers/media/video/bt856.c
deleted file mode 100644
index 7e5bd36..0000000
--- a/drivers/media/video/bt856.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * bt856 - BT856A Digital Video Encoder (Rockwell Part)
- *
- * Copyright (C) 1999 Mike Bernson <mike@mlb.org>
- * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
- *
- * Modifications for LML33/DC10plus unified driver
- * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
- *
- * This code was modify/ported from the saa7111 driver written
- * by Dave Perks.
- *
- * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net>
- *   - moved over to linux>=2.4.x i2c protocol (9/9/2002)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/ioctl.h>
-#include <asm/uaccess.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-
-MODULE_DESCRIPTION("Brooktree-856A video encoder driver");
-MODULE_AUTHOR("Mike Bernson & Dave Perks");
-MODULE_LICENSE("GPL");
-
-static int debug;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
-
-
-/* ----------------------------------------------------------------------- */
-
-#define BT856_REG_OFFSET	0xDA
-#define BT856_NR_REG		6
-
-struct bt856 {
-	struct v4l2_subdev sd;
-	unsigned char reg[BT856_NR_REG];
-
-	v4l2_std_id norm;
-};
-
-static inline struct bt856 *to_bt856(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct bt856, sd);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static inline int bt856_write(struct bt856 *encoder, u8 reg, u8 value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&encoder->sd);
-
-	encoder->reg[reg - BT856_REG_OFFSET] = value;
-	return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-static inline int bt856_setbit(struct bt856 *encoder, u8 reg, u8 bit, u8 value)
-{
-	return bt856_write(encoder, reg,
-		(encoder->reg[reg - BT856_REG_OFFSET] & ~(1 << bit)) |
-				(value ? (1 << bit) : 0));
-}
-
-static void bt856_dump(struct bt856 *encoder)
-{
-	int i;
-
-	v4l2_info(&encoder->sd, "register dump:\n");
-	for (i = 0; i < BT856_NR_REG; i += 2)
-		printk(KERN_CONT " %02x", encoder->reg[i]);
-	printk(KERN_CONT "\n");
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int bt856_init(struct v4l2_subdev *sd, u32 arg)
-{
-	struct bt856 *encoder = to_bt856(sd);
-
-	/* This is just for testing!!! */
-	v4l2_dbg(1, debug, sd, "init\n");
-	bt856_write(encoder, 0xdc, 0x18);
-	bt856_write(encoder, 0xda, 0);
-	bt856_write(encoder, 0xde, 0);
-
-	bt856_setbit(encoder, 0xdc, 3, 1);
-	/*bt856_setbit(encoder, 0xdc, 6, 0);*/
-	bt856_setbit(encoder, 0xdc, 4, 1);
-
-	if (encoder->norm & V4L2_STD_NTSC)
-		bt856_setbit(encoder, 0xdc, 2, 0);
-	else
-		bt856_setbit(encoder, 0xdc, 2, 1);
-
-	bt856_setbit(encoder, 0xdc, 1, 1);
-	bt856_setbit(encoder, 0xde, 4, 0);
-	bt856_setbit(encoder, 0xde, 3, 1);
-	if (debug != 0)
-		bt856_dump(encoder);
-	return 0;
-}
-
-static int bt856_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct bt856 *encoder = to_bt856(sd);
-
-	v4l2_dbg(1, debug, sd, "set norm %llx\n", (unsigned long long)std);
-
-	if (std & V4L2_STD_NTSC) {
-		bt856_setbit(encoder, 0xdc, 2, 0);
-	} else if (std & V4L2_STD_PAL) {
-		bt856_setbit(encoder, 0xdc, 2, 1);
-		bt856_setbit(encoder, 0xda, 0, 0);
-		/*bt856_setbit(encoder, 0xda, 0, 1);*/
-	} else {
-		return -EINVAL;
-	}
-	encoder->norm = std;
-	if (debug != 0)
-		bt856_dump(encoder);
-	return 0;
-}
-
-static int bt856_s_routing(struct v4l2_subdev *sd,
-			   u32 input, u32 output, u32 config)
-{
-	struct bt856 *encoder = to_bt856(sd);
-
-	v4l2_dbg(1, debug, sd, "set input %d\n", input);
-
-	/* We only have video bus.
-	 * input= 0: input is from bt819
-	 * input= 1: input is from ZR36060 */
-	switch (input) {
-	case 0:
-		bt856_setbit(encoder, 0xde, 4, 0);
-		bt856_setbit(encoder, 0xde, 3, 1);
-		bt856_setbit(encoder, 0xdc, 3, 1);
-		bt856_setbit(encoder, 0xdc, 6, 0);
-		break;
-	case 1:
-		bt856_setbit(encoder, 0xde, 4, 0);
-		bt856_setbit(encoder, 0xde, 3, 1);
-		bt856_setbit(encoder, 0xdc, 3, 1);
-		bt856_setbit(encoder, 0xdc, 6, 1);
-		break;
-	case 2:	/* Color bar */
-		bt856_setbit(encoder, 0xdc, 3, 0);
-		bt856_setbit(encoder, 0xde, 4, 1);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (debug != 0)
-		bt856_dump(encoder);
-	return 0;
-}
-
-static int bt856_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_BT856, 0);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops bt856_core_ops = {
-	.g_chip_ident = bt856_g_chip_ident,
-	.init = bt856_init,
-};
-
-static const struct v4l2_subdev_video_ops bt856_video_ops = {
-	.s_std_output = bt856_s_std_output,
-	.s_routing = bt856_s_routing,
-};
-
-static const struct v4l2_subdev_ops bt856_ops = {
-	.core = &bt856_core_ops,
-	.video = &bt856_video_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static int bt856_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	struct bt856 *encoder;
-	struct v4l2_subdev *sd;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -ENODEV;
-
-	v4l_info(client, "chip found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	encoder = kzalloc(sizeof(struct bt856), GFP_KERNEL);
-	if (encoder == NULL)
-		return -ENOMEM;
-	sd = &encoder->sd;
-	v4l2_i2c_subdev_init(sd, client, &bt856_ops);
-	encoder->norm = V4L2_STD_NTSC;
-
-	bt856_write(encoder, 0xdc, 0x18);
-	bt856_write(encoder, 0xda, 0);
-	bt856_write(encoder, 0xde, 0);
-
-	bt856_setbit(encoder, 0xdc, 3, 1);
-	/*bt856_setbit(encoder, 0xdc, 6, 0);*/
-	bt856_setbit(encoder, 0xdc, 4, 1);
-
-	if (encoder->norm & V4L2_STD_NTSC)
-		bt856_setbit(encoder, 0xdc, 2, 0);
-	else
-		bt856_setbit(encoder, 0xdc, 2, 1);
-
-	bt856_setbit(encoder, 0xdc, 1, 1);
-	bt856_setbit(encoder, 0xde, 4, 0);
-	bt856_setbit(encoder, 0xde, 3, 1);
-
-	if (debug != 0)
-		bt856_dump(encoder);
-	return 0;
-}
-
-static int bt856_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-
-	v4l2_device_unregister_subdev(sd);
-	kfree(to_bt856(sd));
-	return 0;
-}
-
-static const struct i2c_device_id bt856_id[] = {
-	{ "bt856", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, bt856_id);
-
-static struct i2c_driver bt856_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "bt856",
-	},
-	.probe		= bt856_probe,
-	.remove		= bt856_remove,
-	.id_table	= bt856_id,
-};
-
-module_i2c_driver(bt856_driver);
diff --git a/drivers/media/video/bt866.c b/drivers/media/video/bt866.c
deleted file mode 100644
index 905320b..0000000
--- a/drivers/media/video/bt866.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
-    bt866 - BT866 Digital Video Encoder (Rockwell Part)
-
-    Copyright (C) 1999 Mike Bernson <mike@mlb.org>
-    Copyright (C) 1998 Dave Perks <dperks@ibm.net>
-
-    Modifications for LML33/DC10plus unified driver
-    Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
-
-    This code was modify/ported from the saa7111 driver written
-    by Dave Perks.
-
-    This code was adapted for the bt866 by Christer Weinigel and ported
-    to 2.6 by Martin Samuelsson.
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/ioctl.h>
-#include <asm/uaccess.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-
-MODULE_DESCRIPTION("Brooktree-866 video encoder driver");
-MODULE_AUTHOR("Mike Bernson & Dave Perks");
-MODULE_LICENSE("GPL");
-
-static int debug;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
-
-
-/* ----------------------------------------------------------------------- */
-
-struct bt866 {
-	struct v4l2_subdev sd;
-	u8 reg[256];
-};
-
-static inline struct bt866 *to_bt866(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct bt866, sd);
-}
-
-static int bt866_write(struct bt866 *encoder, u8 subaddr, u8 data)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&encoder->sd);
-	u8 buffer[2];
-	int err;
-
-	buffer[0] = subaddr;
-	buffer[1] = data;
-
-	encoder->reg[subaddr] = data;
-
-	v4l_dbg(1, debug, client, "write 0x%02x = 0x%02x\n", subaddr, data);
-
-	for (err = 0; err < 3;) {
-		if (i2c_master_send(client, buffer, 2) == 2)
-			break;
-		err++;
-		v4l_warn(client, "error #%d writing to 0x%02x\n",
-				err, subaddr);
-		schedule_timeout_interruptible(msecs_to_jiffies(100));
-	}
-	if (err == 3) {
-		v4l_warn(client, "giving up\n");
-		return -1;
-	}
-
-	return 0;
-}
-
-static int bt866_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	v4l2_dbg(1, debug, sd, "set norm %llx\n", (unsigned long long)std);
-
-	/* Only PAL supported by this driver at the moment! */
-	if (!(std & V4L2_STD_NTSC))
-		return -EINVAL;
-	return 0;
-}
-
-static int bt866_s_routing(struct v4l2_subdev *sd,
-			   u32 input, u32 output, u32 config)
-{
-	static const __u8 init[] = {
-		0xc8, 0xcc, /* CRSCALE */
-		0xca, 0x91, /* CBSCALE */
-		0xcc, 0x24, /* YC16 | OSDNUM */
-		0xda, 0x00, /*  */
-		0xdc, 0x24, /* SETMODE | PAL */
-		0xde, 0x02, /* EACTIVE */
-
-		/* overlay colors */
-		0x70, 0xEB, 0x90, 0x80, 0xB0, 0x80, /* white */
-		0x72, 0xA2, 0x92, 0x8E, 0xB2, 0x2C, /* yellow */
-		0x74, 0x83, 0x94, 0x2C, 0xB4, 0x9C, /* cyan */
-		0x76, 0x70, 0x96, 0x3A, 0xB6, 0x48, /* green */
-		0x78, 0x54, 0x98, 0xC6, 0xB8, 0xB8, /* magenta */
-		0x7A, 0x41, 0x9A, 0xD4, 0xBA, 0x64, /* red */
-		0x7C, 0x23, 0x9C, 0x72, 0xBC, 0xD4, /* blue */
-		0x7E, 0x10, 0x9E, 0x80, 0xBE, 0x80, /* black */
-
-		0x60, 0xEB, 0x80, 0x80, 0xc0, 0x80, /* white */
-		0x62, 0xA2, 0x82, 0x8E, 0xc2, 0x2C, /* yellow */
-		0x64, 0x83, 0x84, 0x2C, 0xc4, 0x9C, /* cyan */
-		0x66, 0x70, 0x86, 0x3A, 0xc6, 0x48, /* green */
-		0x68, 0x54, 0x88, 0xC6, 0xc8, 0xB8, /* magenta */
-		0x6A, 0x41, 0x8A, 0xD4, 0xcA, 0x64, /* red */
-		0x6C, 0x23, 0x8C, 0x72, 0xcC, 0xD4, /* blue */
-		0x6E, 0x10, 0x8E, 0x80, 0xcE, 0x80, /* black */
-	};
-	struct bt866 *encoder = to_bt866(sd);
-	u8 val;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(init) / 2; i += 2)
-		bt866_write(encoder, init[i], init[i+1]);
-
-	val = encoder->reg[0xdc];
-
-	if (input == 0)
-		val |= 0x40; /* CBSWAP */
-	else
-		val &= ~0x40; /* !CBSWAP */
-
-	bt866_write(encoder, 0xdc, val);
-
-	val = encoder->reg[0xcc];
-	if (input == 2)
-		val |= 0x01; /* OSDBAR */
-	else
-		val &= ~0x01; /* !OSDBAR */
-	bt866_write(encoder, 0xcc, val);
-
-	v4l2_dbg(1, debug, sd, "set input %d\n", input);
-
-	switch (input) {
-	case 0:
-	case 1:
-	case 2:
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-#if 0
-/* Code to setup square pixels, might be of some use in the future,
-   but is currently unused. */
-	val = encoder->reg[0xdc];
-	if (*iarg)
-		val |= 1; /* SQUARE */
-	else
-		val &= ~1; /* !SQUARE */
-	bt866_write(client, 0xdc, val);
-#endif
-
-static int bt866_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_BT866, 0);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops bt866_core_ops = {
-	.g_chip_ident = bt866_g_chip_ident,
-};
-
-static const struct v4l2_subdev_video_ops bt866_video_ops = {
-	.s_std_output = bt866_s_std_output,
-	.s_routing = bt866_s_routing,
-};
-
-static const struct v4l2_subdev_ops bt866_ops = {
-	.core = &bt866_core_ops,
-	.video = &bt866_video_ops,
-};
-
-static int bt866_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	struct bt866 *encoder;
-	struct v4l2_subdev *sd;
-
-	v4l_info(client, "chip found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	encoder = kzalloc(sizeof(*encoder), GFP_KERNEL);
-	if (encoder == NULL)
-		return -ENOMEM;
-	sd = &encoder->sd;
-	v4l2_i2c_subdev_init(sd, client, &bt866_ops);
-	return 0;
-}
-
-static int bt866_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-
-	v4l2_device_unregister_subdev(sd);
-	kfree(to_bt866(sd));
-	return 0;
-}
-
-static const struct i2c_device_id bt866_id[] = {
-	{ "bt866", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, bt866_id);
-
-static struct i2c_driver bt866_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "bt866",
-	},
-	.probe		= bt866_probe,
-	.remove		= bt866_remove,
-	.id_table	= bt866_id,
-};
-
-module_i2c_driver(bt866_driver);
diff --git a/drivers/media/video/btcx-risc.c b/drivers/media/video/btcx-risc.c
deleted file mode 100644
index ac1b268..0000000
--- a/drivers/media/video/btcx-risc.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
-
-    btcx-risc.c
-
-    bt848/bt878/cx2388x risc code generator.
-
-    (c) 2000-03 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/videodev2.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-
-#include "btcx-risc.h"
-
-MODULE_DESCRIPTION("some code shared by bttv and cx88xx drivers");
-MODULE_AUTHOR("Gerd Knorr");
-MODULE_LICENSE("GPL");
-
-static unsigned int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug,"debug messages, default is 0 (no)");
-
-/* ---------------------------------------------------------- */
-/* allocate/free risc memory                                  */
-
-static int memcnt;
-
-void btcx_riscmem_free(struct pci_dev *pci,
-		       struct btcx_riscmem *risc)
-{
-	if (NULL == risc->cpu)
-		return;
-	if (debug) {
-		memcnt--;
-		printk("btcx: riscmem free [%d] dma=%lx\n",
-		       memcnt, (unsigned long)risc->dma);
-	}
-	pci_free_consistent(pci, risc->size, risc->cpu, risc->dma);
-	memset(risc,0,sizeof(*risc));
-}
-
-int btcx_riscmem_alloc(struct pci_dev *pci,
-		       struct btcx_riscmem *risc,
-		       unsigned int size)
-{
-	__le32 *cpu;
-	dma_addr_t dma = 0;
-
-	if (NULL != risc->cpu && risc->size < size)
-		btcx_riscmem_free(pci,risc);
-	if (NULL == risc->cpu) {
-		cpu = pci_alloc_consistent(pci, size, &dma);
-		if (NULL == cpu)
-			return -ENOMEM;
-		risc->cpu  = cpu;
-		risc->dma  = dma;
-		risc->size = size;
-		if (debug) {
-			memcnt++;
-			printk("btcx: riscmem alloc [%d] dma=%lx cpu=%p size=%d\n",
-			       memcnt, (unsigned long)dma, cpu, size);
-		}
-	}
-	memset(risc->cpu,0,risc->size);
-	return 0;
-}
-
-/* ---------------------------------------------------------- */
-/* screen overlay helpers                                     */
-
-int
-btcx_screen_clips(int swidth, int sheight, struct v4l2_rect *win,
-		  struct v4l2_clip *clips, unsigned int n)
-{
-	if (win->left < 0) {
-		/* left */
-		clips[n].c.left = 0;
-		clips[n].c.top = 0;
-		clips[n].c.width  = -win->left;
-		clips[n].c.height = win->height;
-		n++;
-	}
-	if (win->left + win->width > swidth) {
-		/* right */
-		clips[n].c.left   = swidth - win->left;
-		clips[n].c.top    = 0;
-		clips[n].c.width  = win->width - clips[n].c.left;
-		clips[n].c.height = win->height;
-		n++;
-	}
-	if (win->top < 0) {
-		/* top */
-		clips[n].c.left = 0;
-		clips[n].c.top = 0;
-		clips[n].c.width  = win->width;
-		clips[n].c.height = -win->top;
-		n++;
-	}
-	if (win->top + win->height > sheight) {
-		/* bottom */
-		clips[n].c.left = 0;
-		clips[n].c.top = sheight - win->top;
-		clips[n].c.width  = win->width;
-		clips[n].c.height = win->height - clips[n].c.top;
-		n++;
-	}
-	return n;
-}
-
-int
-btcx_align(struct v4l2_rect *win, struct v4l2_clip *clips, unsigned int n, int mask)
-{
-	s32 nx,nw,dx;
-	unsigned int i;
-
-	/* fixup window */
-	nx = (win->left + mask) & ~mask;
-	nw = (win->width) & ~mask;
-	if (nx + nw > win->left + win->width)
-		nw -= mask+1;
-	dx = nx - win->left;
-	win->left  = nx;
-	win->width = nw;
-	if (debug)
-		printk(KERN_DEBUG "btcx: window align %dx%d+%d+%d [dx=%d]\n",
-		       win->width, win->height, win->left, win->top, dx);
-
-	/* fixup clips */
-	for (i = 0; i < n; i++) {
-		nx = (clips[i].c.left-dx) & ~mask;
-		nw = (clips[i].c.width) & ~mask;
-		if (nx + nw < clips[i].c.left-dx + clips[i].c.width)
-			nw += mask+1;
-		clips[i].c.left  = nx;
-		clips[i].c.width = nw;
-		if (debug)
-			printk(KERN_DEBUG "btcx:   clip align %dx%d+%d+%d\n",
-			       clips[i].c.width, clips[i].c.height,
-			       clips[i].c.left, clips[i].c.top);
-	}
-	return 0;
-}
-
-void
-btcx_sort_clips(struct v4l2_clip *clips, unsigned int nclips)
-{
-	struct v4l2_clip swap;
-	int i,j,n;
-
-	if (nclips < 2)
-		return;
-	for (i = nclips-2; i >= 0; i--) {
-		for (n = 0, j = 0; j <= i; j++) {
-			if (clips[j].c.left > clips[j+1].c.left) {
-				swap = clips[j];
-				clips[j] = clips[j+1];
-				clips[j+1] = swap;
-				n++;
-			}
-		}
-		if (0 == n)
-			break;
-	}
-}
-
-void
-btcx_calc_skips(int line, int width, int *maxy,
-		struct btcx_skiplist *skips, unsigned int *nskips,
-		const struct v4l2_clip *clips, unsigned int nclips)
-{
-	unsigned int clip,skip;
-	int end, maxline;
-
-	skip=0;
-	maxline = 9999;
-	for (clip = 0; clip < nclips; clip++) {
-
-		/* sanity checks */
-		if (clips[clip].c.left + clips[clip].c.width <= 0)
-			continue;
-		if (clips[clip].c.left > (signed)width)
-			break;
-
-		/* vertical range */
-		if (line > clips[clip].c.top+clips[clip].c.height-1)
-			continue;
-		if (line < clips[clip].c.top) {
-			if (maxline > clips[clip].c.top-1)
-				maxline = clips[clip].c.top-1;
-			continue;
-		}
-		if (maxline > clips[clip].c.top+clips[clip].c.height-1)
-			maxline = clips[clip].c.top+clips[clip].c.height-1;
-
-		/* horizontal range */
-		if (0 == skip || clips[clip].c.left > skips[skip-1].end) {
-			/* new one */
-			skips[skip].start = clips[clip].c.left;
-			if (skips[skip].start < 0)
-				skips[skip].start = 0;
-			skips[skip].end = clips[clip].c.left + clips[clip].c.width;
-			if (skips[skip].end > width)
-				skips[skip].end = width;
-			skip++;
-		} else {
-			/* overlaps -- expand last one */
-			end = clips[clip].c.left + clips[clip].c.width;
-			if (skips[skip-1].end < end)
-				skips[skip-1].end = end;
-			if (skips[skip-1].end > width)
-				skips[skip-1].end = width;
-		}
-	}
-	*nskips = skip;
-	*maxy = maxline;
-
-	if (debug) {
-		printk(KERN_DEBUG "btcx: skips line %d-%d:",line,maxline);
-		for (skip = 0; skip < *nskips; skip++) {
-			printk(" %d-%d",skips[skip].start,skips[skip].end);
-		}
-		printk("\n");
-	}
-}
-
-/* ---------------------------------------------------------- */
-
-EXPORT_SYMBOL(btcx_riscmem_alloc);
-EXPORT_SYMBOL(btcx_riscmem_free);
-
-EXPORT_SYMBOL(btcx_screen_clips);
-EXPORT_SYMBOL(btcx_align);
-EXPORT_SYMBOL(btcx_sort_clips);
-EXPORT_SYMBOL(btcx_calc_skips);
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/video/btcx-risc.h b/drivers/media/video/btcx-risc.h
deleted file mode 100644
index f8bc6e8..0000000
--- a/drivers/media/video/btcx-risc.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- */
-struct btcx_riscmem {
-	unsigned int   size;
-	__le32         *cpu;
-	__le32         *jmp;
-	dma_addr_t     dma;
-};
-
-struct btcx_skiplist {
-	int start;
-	int end;
-};
-
-int  btcx_riscmem_alloc(struct pci_dev *pci,
-			struct btcx_riscmem *risc,
-			unsigned int size);
-void btcx_riscmem_free(struct pci_dev *pci,
-		       struct btcx_riscmem *risc);
-
-int btcx_screen_clips(int swidth, int sheight, struct v4l2_rect *win,
-		      struct v4l2_clip *clips, unsigned int n);
-int btcx_align(struct v4l2_rect *win, struct v4l2_clip *clips,
-	       unsigned int n, int mask);
-void btcx_sort_clips(struct v4l2_clip *clips, unsigned int nclips);
-void btcx_calc_skips(int line, int width, int *maxy,
-		     struct btcx_skiplist *skips, unsigned int *nskips,
-		     const struct v4l2_clip *clips, unsigned int nclips);
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/video/cs5345.c b/drivers/media/video/cs5345.c
deleted file mode 100644
index c8581e2..0000000
--- a/drivers/media/video/cs5345.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * cs5345 Cirrus Logic 24-bit, 192 kHz Stereo Audio ADC
- * Copyright (C) 2007 Hans Verkuil
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <linux/slab.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-ctrls.h>
-
-MODULE_DESCRIPTION("i2c device driver for cs5345 Audio ADC");
-MODULE_AUTHOR("Hans Verkuil");
-MODULE_LICENSE("GPL");
-
-static bool debug;
-
-module_param(debug, bool, 0644);
-
-MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On");
-
-struct cs5345_state {
-	struct v4l2_subdev sd;
-	struct v4l2_ctrl_handler hdl;
-};
-
-static inline struct cs5345_state *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct cs5345_state, sd);
-}
-
-static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
-{
-	return &container_of(ctrl->handler, struct cs5345_state, hdl)->sd;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static inline int cs5345_write(struct v4l2_subdev *sd, u8 reg, u8 value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-static inline int cs5345_read(struct v4l2_subdev *sd, u8 reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int cs5345_s_routing(struct v4l2_subdev *sd,
-			    u32 input, u32 output, u32 config)
-{
-	if ((input & 0xf) > 6) {
-		v4l2_err(sd, "Invalid input %d.\n", input);
-		return -EINVAL;
-	}
-	cs5345_write(sd, 0x09, input & 0xf);
-	cs5345_write(sd, 0x05, input & 0xf0);
-	return 0;
-}
-
-static int cs5345_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		cs5345_write(sd, 0x04, ctrl->val ? 0x80 : 0);
-		return 0;
-	case V4L2_CID_AUDIO_VOLUME:
-		cs5345_write(sd, 0x07, ((u8)ctrl->val) & 0x3f);
-		cs5345_write(sd, 0x08, ((u8)ctrl->val) & 0x3f);
-		return 0;
-	}
-	return -EINVAL;
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int cs5345_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	reg->size = 1;
-	reg->val = cs5345_read(sd, reg->reg & 0x1f);
-	return 0;
-}
-
-static int cs5345_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	cs5345_write(sd, reg->reg & 0x1f, reg->val & 0xff);
-	return 0;
-}
-#endif
-
-static int cs5345_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_CS5345, 0);
-}
-
-static int cs5345_log_status(struct v4l2_subdev *sd)
-{
-	u8 v = cs5345_read(sd, 0x09) & 7;
-	u8 m = cs5345_read(sd, 0x04);
-	int vol = cs5345_read(sd, 0x08) & 0x3f;
-
-	v4l2_info(sd, "Input:  %d%s\n", v,
-			(m & 0x80) ? " (muted)" : "");
-	if (vol >= 32)
-		vol = vol - 64;
-	v4l2_info(sd, "Volume: %d dB\n", vol);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_ctrl_ops cs5345_ctrl_ops = {
-	.s_ctrl = cs5345_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops cs5345_core_ops = {
-	.log_status = cs5345_log_status,
-	.g_chip_ident = cs5345_g_chip_ident,
-	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
-	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
-	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
-	.g_ctrl = v4l2_subdev_g_ctrl,
-	.s_ctrl = v4l2_subdev_s_ctrl,
-	.queryctrl = v4l2_subdev_queryctrl,
-	.querymenu = v4l2_subdev_querymenu,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.g_register = cs5345_g_register,
-	.s_register = cs5345_s_register,
-#endif
-};
-
-static const struct v4l2_subdev_audio_ops cs5345_audio_ops = {
-	.s_routing = cs5345_s_routing,
-};
-
-static const struct v4l2_subdev_ops cs5345_ops = {
-	.core = &cs5345_core_ops,
-	.audio = &cs5345_audio_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static int cs5345_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	struct cs5345_state *state;
-	struct v4l2_subdev *sd;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -EIO;
-
-	v4l_info(client, "chip found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	state = kzalloc(sizeof(struct cs5345_state), GFP_KERNEL);
-	if (state == NULL)
-		return -ENOMEM;
-	sd = &state->sd;
-	v4l2_i2c_subdev_init(sd, client, &cs5345_ops);
-
-	v4l2_ctrl_handler_init(&state->hdl, 2);
-	v4l2_ctrl_new_std(&state->hdl, &cs5345_ctrl_ops,
-			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
-	v4l2_ctrl_new_std(&state->hdl, &cs5345_ctrl_ops,
-			V4L2_CID_AUDIO_VOLUME, -24, 24, 1, 0);
-	sd->ctrl_handler = &state->hdl;
-	if (state->hdl.error) {
-		int err = state->hdl.error;
-
-		v4l2_ctrl_handler_free(&state->hdl);
-		kfree(state);
-		return err;
-	}
-	/* set volume/mute */
-	v4l2_ctrl_handler_setup(&state->hdl);
-
-	cs5345_write(sd, 0x02, 0x00);
-	cs5345_write(sd, 0x04, 0x01);
-	cs5345_write(sd, 0x09, 0x01);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int cs5345_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct cs5345_state *state = to_state(sd);
-
-	v4l2_device_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(&state->hdl);
-	kfree(state);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct i2c_device_id cs5345_id[] = {
-	{ "cs5345", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, cs5345_id);
-
-static struct i2c_driver cs5345_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "cs5345",
-	},
-	.probe		= cs5345_probe,
-	.remove		= cs5345_remove,
-	.id_table	= cs5345_id,
-};
-
-module_i2c_driver(cs5345_driver);
diff --git a/drivers/media/video/cs53l32a.c b/drivers/media/video/cs53l32a.c
deleted file mode 100644
index b293912..0000000
--- a/drivers/media/video/cs53l32a.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * cs53l32a (Adaptec AVC-2010 and AVC-2410) i2c ivtv driver.
- * Copyright (C) 2005  Martin Vaughan
- *
- * Audio source switching for Adaptec AVC-2410 added by Trev Jackson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/ioctl.h>
-#include <asm/uaccess.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-ctrls.h>
-
-MODULE_DESCRIPTION("i2c device driver for cs53l32a Audio ADC");
-MODULE_AUTHOR("Martin Vaughan");
-MODULE_LICENSE("GPL");
-
-static bool debug;
-
-module_param(debug, bool, 0644);
-
-MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On");
-
-
-struct cs53l32a_state {
-	struct v4l2_subdev sd;
-	struct v4l2_ctrl_handler hdl;
-};
-
-static inline struct cs53l32a_state *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct cs53l32a_state, sd);
-}
-
-static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
-{
-	return &container_of(ctrl->handler, struct cs53l32a_state, hdl)->sd;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int cs53l32a_write(struct v4l2_subdev *sd, u8 reg, u8 value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-static int cs53l32a_read(struct v4l2_subdev *sd, u8 reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int cs53l32a_s_routing(struct v4l2_subdev *sd,
-			      u32 input, u32 output, u32 config)
-{
-	/* There are 2 physical inputs, but the second input can be
-	   placed in two modes, the first mode bypasses the PGA (gain),
-	   the second goes through the PGA. Hence there are three
-	   possible inputs to choose from. */
-	if (input > 2) {
-		v4l2_err(sd, "Invalid input %d.\n", input);
-		return -EINVAL;
-	}
-	cs53l32a_write(sd, 0x01, 0x01 + (input << 4));
-	return 0;
-}
-
-static int cs53l32a_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		cs53l32a_write(sd, 0x03, ctrl->val ? 0xf0 : 0x30);
-		return 0;
-	case V4L2_CID_AUDIO_VOLUME:
-		cs53l32a_write(sd, 0x04, (u8)ctrl->val);
-		cs53l32a_write(sd, 0x05, (u8)ctrl->val);
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static int cs53l32a_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client,
-			chip, V4L2_IDENT_CS53l32A, 0);
-}
-
-static int cs53l32a_log_status(struct v4l2_subdev *sd)
-{
-	struct cs53l32a_state *state = to_state(sd);
-	u8 v = cs53l32a_read(sd, 0x01);
-
-	v4l2_info(sd, "Input:  %d\n", (v >> 4) & 3);
-	v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_ctrl_ops cs53l32a_ctrl_ops = {
-	.s_ctrl = cs53l32a_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops cs53l32a_core_ops = {
-	.log_status = cs53l32a_log_status,
-	.g_chip_ident = cs53l32a_g_chip_ident,
-	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
-	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
-	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
-	.g_ctrl = v4l2_subdev_g_ctrl,
-	.s_ctrl = v4l2_subdev_s_ctrl,
-	.queryctrl = v4l2_subdev_queryctrl,
-	.querymenu = v4l2_subdev_querymenu,
-};
-
-static const struct v4l2_subdev_audio_ops cs53l32a_audio_ops = {
-	.s_routing = cs53l32a_s_routing,
-};
-
-static const struct v4l2_subdev_ops cs53l32a_ops = {
-	.core = &cs53l32a_core_ops,
-	.audio = &cs53l32a_audio_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-/* i2c implementation */
-
-/*
- * Generic i2c probe
- * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
- */
-
-static int cs53l32a_probe(struct i2c_client *client,
-			  const struct i2c_device_id *id)
-{
-	struct cs53l32a_state *state;
-	struct v4l2_subdev *sd;
-	int i;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -EIO;
-
-	if (!id)
-		strlcpy(client->name, "cs53l32a", sizeof(client->name));
-
-	v4l_info(client, "chip found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	state = kzalloc(sizeof(struct cs53l32a_state), GFP_KERNEL);
-	if (state == NULL)
-		return -ENOMEM;
-	sd = &state->sd;
-	v4l2_i2c_subdev_init(sd, client, &cs53l32a_ops);
-
-	for (i = 1; i <= 7; i++) {
-		u8 v = cs53l32a_read(sd, i);
-
-		v4l2_dbg(1, debug, sd, "Read Reg %d %02x\n", i, v);
-	}
-
-	v4l2_ctrl_handler_init(&state->hdl, 2);
-	v4l2_ctrl_new_std(&state->hdl, &cs53l32a_ctrl_ops,
-			V4L2_CID_AUDIO_VOLUME, -96, 12, 1, 0);
-	v4l2_ctrl_new_std(&state->hdl, &cs53l32a_ctrl_ops,
-			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
-	sd->ctrl_handler = &state->hdl;
-	if (state->hdl.error) {
-		int err = state->hdl.error;
-
-		v4l2_ctrl_handler_free(&state->hdl);
-		kfree(state);
-		return err;
-	}
-
-	/* Set cs53l32a internal register for Adaptec 2010/2410 setup */
-
-	cs53l32a_write(sd, 0x01, 0x21);
-	cs53l32a_write(sd, 0x02, 0x29);
-	cs53l32a_write(sd, 0x03, 0x30);
-	cs53l32a_write(sd, 0x04, 0x00);
-	cs53l32a_write(sd, 0x05, 0x00);
-	cs53l32a_write(sd, 0x06, 0x00);
-	cs53l32a_write(sd, 0x07, 0x00);
-
-	/* Display results, should be 0x21,0x29,0x30,0x00,0x00,0x00,0x00 */
-
-	for (i = 1; i <= 7; i++) {
-		u8 v = cs53l32a_read(sd, i);
-
-		v4l2_dbg(1, debug, sd, "Read Reg %d %02x\n", i, v);
-	}
-	return 0;
-}
-
-static int cs53l32a_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct cs53l32a_state *state = to_state(sd);
-
-	v4l2_device_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(&state->hdl);
-	kfree(state);
-	return 0;
-}
-
-static const struct i2c_device_id cs53l32a_id[] = {
-	{ "cs53l32a", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, cs53l32a_id);
-
-static struct i2c_driver cs53l32a_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "cs53l32a",
-	},
-	.probe		= cs53l32a_probe,
-	.remove		= cs53l32a_remove,
-	.id_table	= cs53l32a_id,
-};
-
-module_i2c_driver(cs53l32a_driver);
diff --git a/drivers/media/video/cx2341x.c b/drivers/media/video/cx2341x.c
deleted file mode 100644
index 103ef6b..0000000
--- a/drivers/media/video/cx2341x.c
+++ /dev/null
@@ -1,1726 +0,0 @@
-/*
- * cx2341x - generic code for cx23415/6/8 based devices
- *
- * Copyright (C) 2006 Hans Verkuil <hverkuil@xs4all.nl>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/videodev2.h>
-
-#include <media/tuner.h>
-#include <media/cx2341x.h>
-#include <media/v4l2-common.h>
-
-MODULE_DESCRIPTION("cx23415/6/8 driver");
-MODULE_AUTHOR("Hans Verkuil");
-MODULE_LICENSE("GPL");
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
-
-/********************** COMMON CODE *********************/
-
-/* definitions for audio properties bits 29-28 */
-#define CX2341X_AUDIO_ENCODING_METHOD_MPEG	0
-#define CX2341X_AUDIO_ENCODING_METHOD_AC3	1
-#define CX2341X_AUDIO_ENCODING_METHOD_LPCM	2
-
-static const char *cx2341x_get_name(u32 id)
-{
-	switch (id) {
-	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
-		return "Spatial Filter Mode";
-	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER:
-		return "Spatial Filter";
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
-		return "Spatial Luma Filter Type";
-	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
-		return "Spatial Chroma Filter Type";
-	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
-		return "Temporal Filter Mode";
-	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER:
-		return "Temporal Filter";
-	case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
-		return "Median Filter Type";
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP:
-		return "Median Luma Filter Maximum";
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM:
-		return "Median Luma Filter Minimum";
-	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP:
-		return "Median Chroma Filter Maximum";
-	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM:
-		return "Median Chroma Filter Minimum";
-	case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
-		return "Insert Navigation Packets";
-	}
-	return NULL;
-}
-
-static const char **cx2341x_get_menu(u32 id)
-{
-	static const char *cx2341x_video_spatial_filter_mode_menu[] = {
-		"Manual",
-		"Auto",
-		NULL
-	};
-
-	static const char *cx2341x_video_luma_spatial_filter_type_menu[] = {
-		"Off",
-		"1D Horizontal",
-		"1D Vertical",
-		"2D H/V Separable",
-		"2D Symmetric non-separable",
-		NULL
-	};
-
-	static const char *cx2341x_video_chroma_spatial_filter_type_menu[] = {
-		"Off",
-		"1D Horizontal",
-		NULL
-	};
-
-	static const char *cx2341x_video_temporal_filter_mode_menu[] = {
-		"Manual",
-		"Auto",
-		NULL
-	};
-
-	static const char *cx2341x_video_median_filter_type_menu[] = {
-		"Off",
-		"Horizontal",
-		"Vertical",
-		"Horizontal/Vertical",
-		"Diagonal",
-		NULL
-	};
-
-	switch (id) {
-	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
-		return cx2341x_video_spatial_filter_mode_menu;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
-		return cx2341x_video_luma_spatial_filter_type_menu;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
-		return cx2341x_video_chroma_spatial_filter_type_menu;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
-		return cx2341x_video_temporal_filter_mode_menu;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
-		return cx2341x_video_median_filter_type_menu;
-	}
-	return NULL;
-}
-
-static void cx2341x_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
-		    s32 *min, s32 *max, s32 *step, s32 *def, u32 *flags)
-{
-	*name = cx2341x_get_name(id);
-	*flags = 0;
-
-	switch (id) {
-	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
-		*type = V4L2_CTRL_TYPE_MENU;
-		*min = 0;
-		*step = 0;
-		break;
-	case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
-		*type = V4L2_CTRL_TYPE_BOOLEAN;
-		*min = 0;
-		*max = *step = 1;
-		break;
-	default:
-		*type = V4L2_CTRL_TYPE_INTEGER;
-		break;
-	}
-	switch (id) {
-	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
-		*flags |= V4L2_CTRL_FLAG_UPDATE;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM:
-		*flags |= V4L2_CTRL_FLAG_SLIDER;
-		break;
-	case V4L2_CID_MPEG_VIDEO_ENCODING:
-		*flags |= V4L2_CTRL_FLAG_READ_ONLY;
-		break;
-	}
-}
-
-
-/********************** OLD CODE *********************/
-
-/* Must be sorted from low to high control ID! */
-const u32 cx2341x_mpeg_ctrls[] = {
-	V4L2_CID_MPEG_CLASS,
-	V4L2_CID_MPEG_STREAM_TYPE,
-	V4L2_CID_MPEG_STREAM_VBI_FMT,
-	V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ,
-	V4L2_CID_MPEG_AUDIO_ENCODING,
-	V4L2_CID_MPEG_AUDIO_L2_BITRATE,
-	V4L2_CID_MPEG_AUDIO_MODE,
-	V4L2_CID_MPEG_AUDIO_MODE_EXTENSION,
-	V4L2_CID_MPEG_AUDIO_EMPHASIS,
-	V4L2_CID_MPEG_AUDIO_CRC,
-	V4L2_CID_MPEG_AUDIO_MUTE,
-	V4L2_CID_MPEG_AUDIO_AC3_BITRATE,
-	V4L2_CID_MPEG_VIDEO_ENCODING,
-	V4L2_CID_MPEG_VIDEO_ASPECT,
-	V4L2_CID_MPEG_VIDEO_B_FRAMES,
-	V4L2_CID_MPEG_VIDEO_GOP_SIZE,
-	V4L2_CID_MPEG_VIDEO_GOP_CLOSURE,
-	V4L2_CID_MPEG_VIDEO_BITRATE_MODE,
-	V4L2_CID_MPEG_VIDEO_BITRATE,
-	V4L2_CID_MPEG_VIDEO_BITRATE_PEAK,
-	V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION,
-	V4L2_CID_MPEG_VIDEO_MUTE,
-	V4L2_CID_MPEG_VIDEO_MUTE_YUV,
-	V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE,
-	V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER,
-	V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE,
-	V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE,
-	V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE,
-	V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER,
-	V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE,
-	V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM,
-	V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP,
-	V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM,
-	V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP,
-	V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS,
-	0
-};
-EXPORT_SYMBOL(cx2341x_mpeg_ctrls);
-
-static const struct cx2341x_mpeg_params default_params = {
-	/* misc */
-	.capabilities = 0,
-	.port = CX2341X_PORT_MEMORY,
-	.width = 720,
-	.height = 480,
-	.is_50hz = 0,
-
-	/* stream */
-	.stream_type = V4L2_MPEG_STREAM_TYPE_MPEG2_PS,
-	.stream_vbi_fmt = V4L2_MPEG_STREAM_VBI_FMT_NONE,
-	.stream_insert_nav_packets = 0,
-
-	/* audio */
-	.audio_sampling_freq = V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000,
-	.audio_encoding = V4L2_MPEG_AUDIO_ENCODING_LAYER_2,
-	.audio_l2_bitrate = V4L2_MPEG_AUDIO_L2_BITRATE_224K,
-	.audio_ac3_bitrate = V4L2_MPEG_AUDIO_AC3_BITRATE_224K,
-	.audio_mode = V4L2_MPEG_AUDIO_MODE_STEREO,
-	.audio_mode_extension = V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4,
-	.audio_emphasis = V4L2_MPEG_AUDIO_EMPHASIS_NONE,
-	.audio_crc = V4L2_MPEG_AUDIO_CRC_NONE,
-	.audio_mute = 0,
-
-	/* video */
-	.video_encoding = V4L2_MPEG_VIDEO_ENCODING_MPEG_2,
-	.video_aspect = V4L2_MPEG_VIDEO_ASPECT_4x3,
-	.video_b_frames = 2,
-	.video_gop_size = 12,
-	.video_gop_closure = 1,
-	.video_bitrate_mode = V4L2_MPEG_VIDEO_BITRATE_MODE_VBR,
-	.video_bitrate = 6000000,
-	.video_bitrate_peak = 8000000,
-	.video_temporal_decimation = 0,
-	.video_mute = 0,
-	.video_mute_yuv = 0x008080,  /* YCbCr value for black */
-
-	/* encoding filters */
-	.video_spatial_filter_mode =
-		V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL,
-	.video_spatial_filter = 0,
-	.video_luma_spatial_filter_type =
-		V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR,
-	.video_chroma_spatial_filter_type =
-		V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR,
-	.video_temporal_filter_mode =
-		V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL,
-	.video_temporal_filter = 8,
-	.video_median_filter_type =
-		V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF,
-	.video_luma_median_filter_top = 255,
-	.video_luma_median_filter_bottom = 0,
-	.video_chroma_median_filter_top = 255,
-	.video_chroma_median_filter_bottom = 0,
-};
-/* Map the control ID to the correct field in the cx2341x_mpeg_params
-   struct. Return -EINVAL if the ID is unknown, else return 0. */
-static int cx2341x_get_ctrl(const struct cx2341x_mpeg_params *params,
-		struct v4l2_ext_control *ctrl)
-{
-	switch (ctrl->id) {
-	case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
-		ctrl->value = params->audio_sampling_freq;
-		break;
-	case V4L2_CID_MPEG_AUDIO_ENCODING:
-		ctrl->value = params->audio_encoding;
-		break;
-	case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
-		ctrl->value = params->audio_l2_bitrate;
-		break;
-	case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
-		ctrl->value = params->audio_ac3_bitrate;
-		break;
-	case V4L2_CID_MPEG_AUDIO_MODE:
-		ctrl->value = params->audio_mode;
-		break;
-	case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION:
-		ctrl->value = params->audio_mode_extension;
-		break;
-	case V4L2_CID_MPEG_AUDIO_EMPHASIS:
-		ctrl->value = params->audio_emphasis;
-		break;
-	case V4L2_CID_MPEG_AUDIO_CRC:
-		ctrl->value = params->audio_crc;
-		break;
-	case V4L2_CID_MPEG_AUDIO_MUTE:
-		ctrl->value = params->audio_mute;
-		break;
-	case V4L2_CID_MPEG_VIDEO_ENCODING:
-		ctrl->value = params->video_encoding;
-		break;
-	case V4L2_CID_MPEG_VIDEO_ASPECT:
-		ctrl->value = params->video_aspect;
-		break;
-	case V4L2_CID_MPEG_VIDEO_B_FRAMES:
-		ctrl->value = params->video_b_frames;
-		break;
-	case V4L2_CID_MPEG_VIDEO_GOP_SIZE:
-		ctrl->value = params->video_gop_size;
-		break;
-	case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE:
-		ctrl->value = params->video_gop_closure;
-		break;
-	case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
-		ctrl->value = params->video_bitrate_mode;
-		break;
-	case V4L2_CID_MPEG_VIDEO_BITRATE:
-		ctrl->value = params->video_bitrate;
-		break;
-	case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK:
-		ctrl->value = params->video_bitrate_peak;
-		break;
-	case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION:
-		ctrl->value = params->video_temporal_decimation;
-		break;
-	case V4L2_CID_MPEG_VIDEO_MUTE:
-		ctrl->value = params->video_mute;
-		break;
-	case V4L2_CID_MPEG_VIDEO_MUTE_YUV:
-		ctrl->value = params->video_mute_yuv;
-		break;
-	case V4L2_CID_MPEG_STREAM_TYPE:
-		ctrl->value = params->stream_type;
-		break;
-	case V4L2_CID_MPEG_STREAM_VBI_FMT:
-		ctrl->value = params->stream_vbi_fmt;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
-		ctrl->value = params->video_spatial_filter_mode;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER:
-		ctrl->value = params->video_spatial_filter;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
-		ctrl->value = params->video_luma_spatial_filter_type;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
-		ctrl->value = params->video_chroma_spatial_filter_type;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
-		ctrl->value = params->video_temporal_filter_mode;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER:
-		ctrl->value = params->video_temporal_filter;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
-		ctrl->value = params->video_median_filter_type;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP:
-		ctrl->value = params->video_luma_median_filter_top;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM:
-		ctrl->value = params->video_luma_median_filter_bottom;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP:
-		ctrl->value = params->video_chroma_median_filter_top;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM:
-		ctrl->value = params->video_chroma_median_filter_bottom;
-		break;
-	case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
-		ctrl->value = params->stream_insert_nav_packets;
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-/* Map the control ID to the correct field in the cx2341x_mpeg_params
-   struct. Return -EINVAL if the ID is unknown, else return 0. */
-static int cx2341x_set_ctrl(struct cx2341x_mpeg_params *params, int busy,
-		struct v4l2_ext_control *ctrl)
-{
-	switch (ctrl->id) {
-	case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
-		if (busy)
-			return -EBUSY;
-		params->audio_sampling_freq = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_AUDIO_ENCODING:
-		if (busy)
-			return -EBUSY;
-		if (params->capabilities & CX2341X_CAP_HAS_AC3)
-			if (ctrl->value != V4L2_MPEG_AUDIO_ENCODING_LAYER_2 &&
-			    ctrl->value != V4L2_MPEG_AUDIO_ENCODING_AC3)
-				return -ERANGE;
-		params->audio_encoding = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
-		if (busy)
-			return -EBUSY;
-		params->audio_l2_bitrate = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
-		if (busy)
-			return -EBUSY;
-		if (!(params->capabilities & CX2341X_CAP_HAS_AC3))
-			return -EINVAL;
-		params->audio_ac3_bitrate = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_AUDIO_MODE:
-		params->audio_mode = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION:
-		params->audio_mode_extension = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_AUDIO_EMPHASIS:
-		params->audio_emphasis = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_AUDIO_CRC:
-		params->audio_crc = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_AUDIO_MUTE:
-		params->audio_mute = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_VIDEO_ASPECT:
-		params->video_aspect = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_VIDEO_B_FRAMES: {
-		int b = ctrl->value + 1;
-		int gop = params->video_gop_size;
-		params->video_b_frames = ctrl->value;
-		params->video_gop_size = b * ((gop + b - 1) / b);
-		/* Max GOP size = 34 */
-		while (params->video_gop_size > 34)
-			params->video_gop_size -= b;
-		break;
-	}
-	case V4L2_CID_MPEG_VIDEO_GOP_SIZE: {
-		int b = params->video_b_frames + 1;
-		int gop = ctrl->value;
-		params->video_gop_size = b * ((gop + b - 1) / b);
-		/* Max GOP size = 34 */
-		while (params->video_gop_size > 34)
-			params->video_gop_size -= b;
-		ctrl->value = params->video_gop_size;
-		break;
-	}
-	case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE:
-		params->video_gop_closure = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
-		if (busy)
-			return -EBUSY;
-		/* MPEG-1 only allows CBR */
-		if (params->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1 &&
-		    ctrl->value != V4L2_MPEG_VIDEO_BITRATE_MODE_CBR)
-			return -EINVAL;
-		params->video_bitrate_mode = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_VIDEO_BITRATE:
-		if (busy)
-			return -EBUSY;
-		params->video_bitrate = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK:
-		if (busy)
-			return -EBUSY;
-		params->video_bitrate_peak = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION:
-		params->video_temporal_decimation = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_VIDEO_MUTE:
-		params->video_mute = (ctrl->value != 0);
-		break;
-	case V4L2_CID_MPEG_VIDEO_MUTE_YUV:
-		params->video_mute_yuv = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_STREAM_TYPE:
-		if (busy)
-			return -EBUSY;
-		params->stream_type = ctrl->value;
-		params->video_encoding =
-		    (params->stream_type == V4L2_MPEG_STREAM_TYPE_MPEG1_SS ||
-		     params->stream_type == V4L2_MPEG_STREAM_TYPE_MPEG1_VCD) ?
-			V4L2_MPEG_VIDEO_ENCODING_MPEG_1 :
-			V4L2_MPEG_VIDEO_ENCODING_MPEG_2;
-		if (params->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1)
-			/* MPEG-1 implies CBR */
-			params->video_bitrate_mode =
-				V4L2_MPEG_VIDEO_BITRATE_MODE_CBR;
-		break;
-	case V4L2_CID_MPEG_STREAM_VBI_FMT:
-		params->stream_vbi_fmt = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
-		params->video_spatial_filter_mode = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER:
-		params->video_spatial_filter = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
-		params->video_luma_spatial_filter_type = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
-		params->video_chroma_spatial_filter_type = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
-		params->video_temporal_filter_mode = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER:
-		params->video_temporal_filter = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
-		params->video_median_filter_type = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP:
-		params->video_luma_median_filter_top = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM:
-		params->video_luma_median_filter_bottom = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP:
-		params->video_chroma_median_filter_top = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM:
-		params->video_chroma_median_filter_bottom = ctrl->value;
-		break;
-	case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
-		params->stream_insert_nav_packets = ctrl->value;
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int cx2341x_ctrl_query_fill(struct v4l2_queryctrl *qctrl,
-				   s32 min, s32 max, s32 step, s32 def)
-{
-	const char *name;
-
-	switch (qctrl->id) {
-	/* MPEG controls */
-	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM:
-	case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
-		cx2341x_ctrl_fill(qctrl->id, &name, &qctrl->type,
-				&min, &max, &step, &def, &qctrl->flags);
-		qctrl->minimum = min;
-		qctrl->maximum = max;
-		qctrl->step = step;
-		qctrl->default_value = def;
-		qctrl->reserved[0] = qctrl->reserved[1] = 0;
-		strlcpy(qctrl->name, name, sizeof(qctrl->name));
-		return 0;
-
-	default:
-		return v4l2_ctrl_query_fill(qctrl, min, max, step, def);
-	}
-}
-
-int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params,
-		       struct v4l2_queryctrl *qctrl)
-{
-	int err;
-
-	switch (qctrl->id) {
-	case V4L2_CID_MPEG_CLASS:
-		return v4l2_ctrl_query_fill(qctrl, 0, 0, 0, 0);
-	case V4L2_CID_MPEG_STREAM_TYPE:
-		return v4l2_ctrl_query_fill(qctrl,
-				V4L2_MPEG_STREAM_TYPE_MPEG2_PS,
-				V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD, 1,
-				V4L2_MPEG_STREAM_TYPE_MPEG2_PS);
-
-	case V4L2_CID_MPEG_STREAM_VBI_FMT:
-		if (params->capabilities & CX2341X_CAP_HAS_SLICED_VBI)
-			return v4l2_ctrl_query_fill(qctrl,
-					V4L2_MPEG_STREAM_VBI_FMT_NONE,
-					V4L2_MPEG_STREAM_VBI_FMT_IVTV, 1,
-					V4L2_MPEG_STREAM_VBI_FMT_NONE);
-		return cx2341x_ctrl_query_fill(qctrl,
-				V4L2_MPEG_STREAM_VBI_FMT_NONE,
-				V4L2_MPEG_STREAM_VBI_FMT_NONE, 1,
-				default_params.stream_vbi_fmt);
-
-	case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
-		return v4l2_ctrl_query_fill(qctrl,
-				V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100,
-				V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000, 1,
-				V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000);
-
-	case V4L2_CID_MPEG_AUDIO_ENCODING:
-		if (params->capabilities & CX2341X_CAP_HAS_AC3) {
-			/*
-			 * The state of L2 & AC3 bitrate controls can change
-			 * when this control changes, but v4l2_ctrl_query_fill()
-			 * already sets V4L2_CTRL_FLAG_UPDATE for
-			 * V4L2_CID_MPEG_AUDIO_ENCODING, so we don't here.
-			 */
-			return v4l2_ctrl_query_fill(qctrl,
-					V4L2_MPEG_AUDIO_ENCODING_LAYER_2,
-					V4L2_MPEG_AUDIO_ENCODING_AC3, 1,
-					default_params.audio_encoding);
-		}
-
-		return v4l2_ctrl_query_fill(qctrl,
-				V4L2_MPEG_AUDIO_ENCODING_LAYER_2,
-				V4L2_MPEG_AUDIO_ENCODING_LAYER_2, 1,
-				default_params.audio_encoding);
-
-	case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
-		err = v4l2_ctrl_query_fill(qctrl,
-				V4L2_MPEG_AUDIO_L2_BITRATE_192K,
-				V4L2_MPEG_AUDIO_L2_BITRATE_384K, 1,
-				default_params.audio_l2_bitrate);
-		if (err)
-			return err;
-		if (params->capabilities & CX2341X_CAP_HAS_AC3 &&
-		    params->audio_encoding != V4L2_MPEG_AUDIO_ENCODING_LAYER_2)
-			qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE;
-		return 0;
-
-	case V4L2_CID_MPEG_AUDIO_MODE:
-		return v4l2_ctrl_query_fill(qctrl,
-				V4L2_MPEG_AUDIO_MODE_STEREO,
-				V4L2_MPEG_AUDIO_MODE_MONO, 1,
-				V4L2_MPEG_AUDIO_MODE_STEREO);
-
-	case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION:
-		err = v4l2_ctrl_query_fill(qctrl,
-				V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4,
-				V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16, 1,
-				V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4);
-		if (err == 0 &&
-		    params->audio_mode != V4L2_MPEG_AUDIO_MODE_JOINT_STEREO)
-			qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE;
-		return err;
-
-	case V4L2_CID_MPEG_AUDIO_EMPHASIS:
-		return v4l2_ctrl_query_fill(qctrl,
-				V4L2_MPEG_AUDIO_EMPHASIS_NONE,
-				V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17, 1,
-				V4L2_MPEG_AUDIO_EMPHASIS_NONE);
-
-	case V4L2_CID_MPEG_AUDIO_CRC:
-		return v4l2_ctrl_query_fill(qctrl,
-				V4L2_MPEG_AUDIO_CRC_NONE,
-				V4L2_MPEG_AUDIO_CRC_CRC16, 1,
-				V4L2_MPEG_AUDIO_CRC_NONE);
-
-	case V4L2_CID_MPEG_AUDIO_MUTE:
-		return v4l2_ctrl_query_fill(qctrl, 0, 1, 1, 0);
-
-	case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
-		err = v4l2_ctrl_query_fill(qctrl,
-				V4L2_MPEG_AUDIO_AC3_BITRATE_48K,
-				V4L2_MPEG_AUDIO_AC3_BITRATE_448K, 1,
-				default_params.audio_ac3_bitrate);
-		if (err)
-			return err;
-		if (params->capabilities & CX2341X_CAP_HAS_AC3) {
-			if (params->audio_encoding !=
-						   V4L2_MPEG_AUDIO_ENCODING_AC3)
-				qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE;
-		} else
-			qctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
-		return 0;
-
-	case V4L2_CID_MPEG_VIDEO_ENCODING:
-		/* this setting is read-only for the cx2341x since the
-		   V4L2_CID_MPEG_STREAM_TYPE really determines the
-		   MPEG-1/2 setting */
-		err = v4l2_ctrl_query_fill(qctrl,
-					   V4L2_MPEG_VIDEO_ENCODING_MPEG_1,
-					   V4L2_MPEG_VIDEO_ENCODING_MPEG_2, 1,
-					   V4L2_MPEG_VIDEO_ENCODING_MPEG_2);
-		if (err == 0)
-			qctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
-		return err;
-
-	case V4L2_CID_MPEG_VIDEO_ASPECT:
-		return v4l2_ctrl_query_fill(qctrl,
-				V4L2_MPEG_VIDEO_ASPECT_1x1,
-				V4L2_MPEG_VIDEO_ASPECT_221x100, 1,
-				V4L2_MPEG_VIDEO_ASPECT_4x3);
-
-	case V4L2_CID_MPEG_VIDEO_B_FRAMES:
-		return v4l2_ctrl_query_fill(qctrl, 0, 33, 1, 2);
-
-	case V4L2_CID_MPEG_VIDEO_GOP_SIZE:
-		return v4l2_ctrl_query_fill(qctrl, 1, 34, 1,
-				params->is_50hz ? 12 : 15);
-
-	case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE:
-		return v4l2_ctrl_query_fill(qctrl, 0, 1, 1, 1);
-
-	case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
-		err = v4l2_ctrl_query_fill(qctrl,
-				V4L2_MPEG_VIDEO_BITRATE_MODE_VBR,
-				V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, 1,
-				V4L2_MPEG_VIDEO_BITRATE_MODE_VBR);
-		if (err == 0 &&
-		    params->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1)
-			qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE;
-		return err;
-
-	case V4L2_CID_MPEG_VIDEO_BITRATE:
-		return v4l2_ctrl_query_fill(qctrl, 0, 27000000, 1, 6000000);
-
-	case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK:
-		err = v4l2_ctrl_query_fill(qctrl, 0, 27000000, 1, 8000000);
-		if (err == 0 &&
-		    params->video_bitrate_mode ==
-				V4L2_MPEG_VIDEO_BITRATE_MODE_CBR)
-			qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE;
-		return err;
-
-	case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION:
-		return v4l2_ctrl_query_fill(qctrl, 0, 255, 1, 0);
-
-	case V4L2_CID_MPEG_VIDEO_MUTE:
-		return v4l2_ctrl_query_fill(qctrl, 0, 1, 1, 0);
-
-	case V4L2_CID_MPEG_VIDEO_MUTE_YUV:  /* Init YUV (really YCbCr) to black */
-		return v4l2_ctrl_query_fill(qctrl, 0, 0xffffff, 1, 0x008080);
-
-	/* CX23415/6 specific */
-	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
-		return cx2341x_ctrl_query_fill(qctrl,
-			V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL,
-			V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO, 1,
-			default_params.video_spatial_filter_mode);
-
-	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER:
-		cx2341x_ctrl_query_fill(qctrl, 0, 15, 1,
-				default_params.video_spatial_filter);
-		qctrl->flags |= V4L2_CTRL_FLAG_SLIDER;
-		if (params->video_spatial_filter_mode ==
-			    V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO)
-			qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE;
-		return 0;
-
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
-		cx2341x_ctrl_query_fill(qctrl,
-			V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF,
-			V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE,
-			1,
-			default_params.video_luma_spatial_filter_type);
-		if (params->video_spatial_filter_mode ==
-			    V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO)
-			qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE;
-		return 0;
-
-	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
-		cx2341x_ctrl_query_fill(qctrl,
-		    V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF,
-		    V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR,
-		    1,
-		    default_params.video_chroma_spatial_filter_type);
-		if (params->video_spatial_filter_mode ==
-			V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO)
-			qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE;
-		return 0;
-
-	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
-		return cx2341x_ctrl_query_fill(qctrl,
-			V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL,
-			V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO, 1,
-			default_params.video_temporal_filter_mode);
-
-	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER:
-		cx2341x_ctrl_query_fill(qctrl, 0, 31, 1,
-				default_params.video_temporal_filter);
-		qctrl->flags |= V4L2_CTRL_FLAG_SLIDER;
-		if (params->video_temporal_filter_mode ==
-			V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO)
-			qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE;
-		return 0;
-
-	case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
-		return cx2341x_ctrl_query_fill(qctrl,
-			V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF,
-			V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG, 1,
-			default_params.video_median_filter_type);
-
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP:
-		cx2341x_ctrl_query_fill(qctrl, 0, 255, 1,
-				default_params.video_luma_median_filter_top);
-		qctrl->flags |= V4L2_CTRL_FLAG_SLIDER;
-		if (params->video_median_filter_type ==
-				V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF)
-			qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE;
-		return 0;
-
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM:
-		cx2341x_ctrl_query_fill(qctrl, 0, 255, 1,
-				default_params.video_luma_median_filter_bottom);
-		qctrl->flags |= V4L2_CTRL_FLAG_SLIDER;
-		if (params->video_median_filter_type ==
-				V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF)
-			qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE;
-		return 0;
-
-	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP:
-		cx2341x_ctrl_query_fill(qctrl, 0, 255, 1,
-				default_params.video_chroma_median_filter_top);
-		qctrl->flags |= V4L2_CTRL_FLAG_SLIDER;
-		if (params->video_median_filter_type ==
-				V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF)
-			qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE;
-		return 0;
-
-	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM:
-		cx2341x_ctrl_query_fill(qctrl, 0, 255, 1,
-			default_params.video_chroma_median_filter_bottom);
-		qctrl->flags |= V4L2_CTRL_FLAG_SLIDER;
-		if (params->video_median_filter_type ==
-				V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF)
-			qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE;
-		return 0;
-
-	case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
-		return cx2341x_ctrl_query_fill(qctrl, 0, 1, 1,
-				default_params.stream_insert_nav_packets);
-
-	default:
-		return -EINVAL;
-
-	}
-}
-EXPORT_SYMBOL(cx2341x_ctrl_query);
-
-const char * const *cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id)
-{
-	static const char * const mpeg_stream_type_without_ts[] = {
-		"MPEG-2 Program Stream",
-		"",
-		"MPEG-1 System Stream",
-		"MPEG-2 DVD-compatible Stream",
-		"MPEG-1 VCD-compatible Stream",
-		"MPEG-2 SVCD-compatible Stream",
-		NULL
-	};
-
-	static const char *mpeg_stream_type_with_ts[] = {
-		"MPEG-2 Program Stream",
-		"MPEG-2 Transport Stream",
-		"MPEG-1 System Stream",
-		"MPEG-2 DVD-compatible Stream",
-		"MPEG-1 VCD-compatible Stream",
-		"MPEG-2 SVCD-compatible Stream",
-		NULL
-	};
-
-	static const char *mpeg_audio_encoding_l2_ac3[] = {
-		"",
-		"MPEG-1/2 Layer II",
-		"",
-		"",
-		"AC-3",
-		NULL
-	};
-
-	switch (id) {
-	case V4L2_CID_MPEG_STREAM_TYPE:
-		return (p->capabilities & CX2341X_CAP_HAS_TS) ?
-			mpeg_stream_type_with_ts : mpeg_stream_type_without_ts;
-	case V4L2_CID_MPEG_AUDIO_ENCODING:
-		return (p->capabilities & CX2341X_CAP_HAS_AC3) ?
-			mpeg_audio_encoding_l2_ac3 : v4l2_ctrl_get_menu(id);
-	case V4L2_CID_MPEG_AUDIO_L1_BITRATE:
-	case V4L2_CID_MPEG_AUDIO_L3_BITRATE:
-		return NULL;
-	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE:
-	case V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE:
-		return cx2341x_get_menu(id);
-	default:
-		return v4l2_ctrl_get_menu(id);
-	}
-}
-EXPORT_SYMBOL(cx2341x_ctrl_get_menu);
-
-static void cx2341x_calc_audio_properties(struct cx2341x_mpeg_params *params)
-{
-	params->audio_properties =
-		(params->audio_sampling_freq << 0) |
-		(params->audio_mode << 8) |
-		(params->audio_mode_extension << 10) |
-		(((params->audio_emphasis == V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17)
-		  ? 3 : params->audio_emphasis) << 12) |
-		(params->audio_crc << 14);
-
-	if ((params->capabilities & CX2341X_CAP_HAS_AC3) &&
-	    params->audio_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3) {
-		params->audio_properties |=
-			/* Not sure if this MPEG Layer II setting is required */
-			((3 - V4L2_MPEG_AUDIO_ENCODING_LAYER_2) << 2) |
-			(params->audio_ac3_bitrate << 4) |
-			(CX2341X_AUDIO_ENCODING_METHOD_AC3 << 28);
-	} else {
-		/* Assuming MPEG Layer II */
-		params->audio_properties |=
-			((3 - params->audio_encoding) << 2) |
-			((1 + params->audio_l2_bitrate) << 4);
-	}
-}
-
-int cx2341x_ext_ctrls(struct cx2341x_mpeg_params *params, int busy,
-		  struct v4l2_ext_controls *ctrls, unsigned int cmd)
-{
-	int err = 0;
-	int i;
-
-	if (cmd == VIDIOC_G_EXT_CTRLS) {
-		for (i = 0; i < ctrls->count; i++) {
-			struct v4l2_ext_control *ctrl = ctrls->controls + i;
-
-			err = cx2341x_get_ctrl(params, ctrl);
-			if (err) {
-				ctrls->error_idx = i;
-				break;
-			}
-		}
-		return err;
-	}
-	for (i = 0; i < ctrls->count; i++) {
-		struct v4l2_ext_control *ctrl = ctrls->controls + i;
-		struct v4l2_queryctrl qctrl;
-		const char * const *menu_items = NULL;
-
-		qctrl.id = ctrl->id;
-		err = cx2341x_ctrl_query(params, &qctrl);
-		if (err)
-			break;
-		if (qctrl.type == V4L2_CTRL_TYPE_MENU)
-			menu_items = cx2341x_ctrl_get_menu(params, qctrl.id);
-		err = v4l2_ctrl_check(ctrl, &qctrl, menu_items);
-		if (err)
-			break;
-		err = cx2341x_set_ctrl(params, busy, ctrl);
-		if (err)
-			break;
-	}
-	if (err == 0 &&
-	    params->video_bitrate_mode == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR &&
-	    params->video_bitrate_peak < params->video_bitrate) {
-		err = -ERANGE;
-		ctrls->error_idx = ctrls->count;
-	}
-	if (err)
-		ctrls->error_idx = i;
-	else
-		cx2341x_calc_audio_properties(params);
-	return err;
-}
-EXPORT_SYMBOL(cx2341x_ext_ctrls);
-
-void cx2341x_fill_defaults(struct cx2341x_mpeg_params *p)
-{
-	*p = default_params;
-	cx2341x_calc_audio_properties(p);
-}
-EXPORT_SYMBOL(cx2341x_fill_defaults);
-
-static int cx2341x_api(void *priv, cx2341x_mbox_func func,
-		       u32 cmd, int args, ...)
-{
-	u32 data[CX2341X_MBOX_MAX_DATA];
-	va_list vargs;
-	int i;
-
-	va_start(vargs, args);
-
-	for (i = 0; i < args; i++)
-		data[i] = va_arg(vargs, int);
-	va_end(vargs);
-	return func(priv, cmd, args, 0, data);
-}
-
-#define NEQ(field) (old->field != new->field)
-
-int cx2341x_update(void *priv, cx2341x_mbox_func func,
-		   const struct cx2341x_mpeg_params *old,
-		   const struct cx2341x_mpeg_params *new)
-{
-	static int mpeg_stream_type[] = {
-		0,	/* MPEG-2 PS */
-		1,	/* MPEG-2 TS */
-		2,	/* MPEG-1 SS */
-		14,	/* DVD */
-		11,	/* VCD */
-		12,	/* SVCD */
-	};
-
-	int err = 0;
-	int force = (old == NULL);
-	u16 temporal = new->video_temporal_filter;
-
-	cx2341x_api(priv, func, CX2341X_ENC_SET_OUTPUT_PORT, 2, new->port, 0);
-
-	if (force || NEQ(is_50hz)) {
-		err = cx2341x_api(priv, func, CX2341X_ENC_SET_FRAME_RATE, 1,
-				  new->is_50hz);
-		if (err) return err;
-	}
-
-	if (force || NEQ(width) || NEQ(height) || NEQ(video_encoding)) {
-		u16 w = new->width;
-		u16 h = new->height;
-
-		if (new->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1) {
-			w /= 2;
-			h /= 2;
-		}
-		err = cx2341x_api(priv, func, CX2341X_ENC_SET_FRAME_SIZE, 2,
-				  h, w);
-		if (err) return err;
-	}
-	if (force || NEQ(stream_type)) {
-		err = cx2341x_api(priv, func, CX2341X_ENC_SET_STREAM_TYPE, 1,
-				  mpeg_stream_type[new->stream_type]);
-		if (err) return err;
-	}
-	if (force || NEQ(video_aspect)) {
-		err = cx2341x_api(priv, func, CX2341X_ENC_SET_ASPECT_RATIO, 1,
-				  1 + new->video_aspect);
-		if (err) return err;
-	}
-	if (force || NEQ(video_b_frames) || NEQ(video_gop_size)) {
-		err = cx2341x_api(priv, func, CX2341X_ENC_SET_GOP_PROPERTIES, 2,
-				new->video_gop_size, new->video_b_frames + 1);
-		if (err) return err;
-	}
-	if (force || NEQ(video_gop_closure)) {
-		err = cx2341x_api(priv, func, CX2341X_ENC_SET_GOP_CLOSURE, 1,
-				  new->video_gop_closure);
-		if (err) return err;
-	}
-	if (force || NEQ(audio_properties)) {
-		err = cx2341x_api(priv, func, CX2341X_ENC_SET_AUDIO_PROPERTIES,
-				  1, new->audio_properties);
-		if (err) return err;
-	}
-	if (force || NEQ(audio_mute)) {
-		err = cx2341x_api(priv, func, CX2341X_ENC_MUTE_AUDIO, 1,
-				  new->audio_mute);
-		if (err) return err;
-	}
-	if (force || NEQ(video_bitrate_mode) || NEQ(video_bitrate) ||
-						NEQ(video_bitrate_peak)) {
-		err = cx2341x_api(priv, func, CX2341X_ENC_SET_BIT_RATE, 5,
-				new->video_bitrate_mode, new->video_bitrate,
-				new->video_bitrate_peak / 400, 0, 0);
-		if (err) return err;
-	}
-	if (force || NEQ(video_spatial_filter_mode) ||
-		     NEQ(video_temporal_filter_mode) ||
-		     NEQ(video_median_filter_type)) {
-		err = cx2341x_api(priv, func, CX2341X_ENC_SET_DNR_FILTER_MODE,
-				  2, new->video_spatial_filter_mode |
-					(new->video_temporal_filter_mode << 1),
-				new->video_median_filter_type);
-		if (err) return err;
-	}
-	if (force || NEQ(video_luma_median_filter_bottom) ||
-		     NEQ(video_luma_median_filter_top) ||
-		     NEQ(video_chroma_median_filter_bottom) ||
-		     NEQ(video_chroma_median_filter_top)) {
-		err = cx2341x_api(priv, func, CX2341X_ENC_SET_CORING_LEVELS, 4,
-				new->video_luma_median_filter_bottom,
-				new->video_luma_median_filter_top,
-				new->video_chroma_median_filter_bottom,
-				new->video_chroma_median_filter_top);
-		if (err) return err;
-	}
-	if (force || NEQ(video_luma_spatial_filter_type) ||
-		     NEQ(video_chroma_spatial_filter_type)) {
-		err = cx2341x_api(priv, func,
-				  CX2341X_ENC_SET_SPATIAL_FILTER_TYPE,
-				  2, new->video_luma_spatial_filter_type,
-				  new->video_chroma_spatial_filter_type);
-		if (err) return err;
-	}
-	if (force || NEQ(video_spatial_filter) ||
-		     old->video_temporal_filter != temporal) {
-		err = cx2341x_api(priv, func, CX2341X_ENC_SET_DNR_FILTER_PROPS,
-				  2, new->video_spatial_filter, temporal);
-		if (err) return err;
-	}
-	if (force || NEQ(video_temporal_decimation)) {
-		err = cx2341x_api(priv, func, CX2341X_ENC_SET_FRAME_DROP_RATE,
-				  1, new->video_temporal_decimation);
-		if (err) return err;
-	}
-	if (force || NEQ(video_mute) ||
-		(new->video_mute && NEQ(video_mute_yuv))) {
-		err = cx2341x_api(priv, func, CX2341X_ENC_MUTE_VIDEO, 1,
-				new->video_mute | (new->video_mute_yuv << 8));
-		if (err) return err;
-	}
-	if (force || NEQ(stream_insert_nav_packets)) {
-		err = cx2341x_api(priv, func, CX2341X_ENC_MISC, 2,
-				7, new->stream_insert_nav_packets);
-		if (err) return err;
-	}
-	return 0;
-}
-EXPORT_SYMBOL(cx2341x_update);
-
-static const char *cx2341x_menu_item(const struct cx2341x_mpeg_params *p, u32 id)
-{
-	const char * const *menu = cx2341x_ctrl_get_menu(p, id);
-	struct v4l2_ext_control ctrl;
-
-	if (menu == NULL)
-		goto invalid;
-	ctrl.id = id;
-	if (cx2341x_get_ctrl(p, &ctrl))
-		goto invalid;
-	while (ctrl.value-- && *menu) menu++;
-	if (*menu == NULL)
-		goto invalid;
-	return *menu;
-
-invalid:
-	return "<invalid>";
-}
-
-void cx2341x_log_status(const struct cx2341x_mpeg_params *p, const char *prefix)
-{
-	int is_mpeg1 = p->video_encoding == V4L2_MPEG_VIDEO_ENCODING_MPEG_1;
-
-	/* Stream */
-	printk(KERN_INFO "%s: Stream: %s",
-		prefix,
-		cx2341x_menu_item(p, V4L2_CID_MPEG_STREAM_TYPE));
-	if (p->stream_insert_nav_packets)
-		printk(" (with navigation packets)");
-	printk("\n");
-	printk(KERN_INFO "%s: VBI Format: %s\n",
-		prefix,
-		cx2341x_menu_item(p, V4L2_CID_MPEG_STREAM_VBI_FMT));
-
-	/* Video */
-	printk(KERN_INFO "%s: Video:  %dx%d, %d fps%s\n",
-		prefix,
-		p->width / (is_mpeg1 ? 2 : 1), p->height / (is_mpeg1 ? 2 : 1),
-		p->is_50hz ? 25 : 30,
-		(p->video_mute) ? " (muted)" : "");
-	printk(KERN_INFO "%s: Video:  %s, %s, %s, %d",
-		prefix,
-		cx2341x_menu_item(p, V4L2_CID_MPEG_VIDEO_ENCODING),
-		cx2341x_menu_item(p, V4L2_CID_MPEG_VIDEO_ASPECT),
-		cx2341x_menu_item(p, V4L2_CID_MPEG_VIDEO_BITRATE_MODE),
-		p->video_bitrate);
-	if (p->video_bitrate_mode == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR)
-		printk(", Peak %d", p->video_bitrate_peak);
-	printk("\n");
-	printk(KERN_INFO
-		"%s: Video:  GOP Size %d, %d B-Frames, %sGOP Closure\n",
-		prefix,
-		p->video_gop_size, p->video_b_frames,
-		p->video_gop_closure ? "" : "No ");
-	if (p->video_temporal_decimation)
-		printk(KERN_INFO "%s: Video: Temporal Decimation %d\n",
-			prefix, p->video_temporal_decimation);
-
-	/* Audio */
-	printk(KERN_INFO "%s: Audio:  %s, %s, %s, %s%s",
-		prefix,
-		cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ),
-		cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_ENCODING),
-		cx2341x_menu_item(p,
-			   p->audio_encoding == V4L2_MPEG_AUDIO_ENCODING_AC3
-					      ? V4L2_CID_MPEG_AUDIO_AC3_BITRATE
-					      : V4L2_CID_MPEG_AUDIO_L2_BITRATE),
-		cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_MODE),
-		p->audio_mute ? " (muted)" : "");
-	if (p->audio_mode == V4L2_MPEG_AUDIO_MODE_JOINT_STEREO)
-		printk(", %s", cx2341x_menu_item(p,
-				V4L2_CID_MPEG_AUDIO_MODE_EXTENSION));
-	printk(", %s, %s\n",
-		cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_EMPHASIS),
-		cx2341x_menu_item(p, V4L2_CID_MPEG_AUDIO_CRC));
-
-	/* Encoding filters */
-	printk(KERN_INFO "%s: Spatial Filter:  %s, Luma %s, Chroma %s, %d\n",
-		prefix,
-		cx2341x_menu_item(p,
-		    V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE),
-		cx2341x_menu_item(p,
-		    V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE),
-		cx2341x_menu_item(p,
-		    V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE),
-		p->video_spatial_filter);
-
-	printk(KERN_INFO "%s: Temporal Filter: %s, %d\n",
-		prefix,
-		cx2341x_menu_item(p,
-			V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE),
-		p->video_temporal_filter);
-	printk(KERN_INFO
-		"%s: Median Filter:   %s, Luma [%d, %d], Chroma [%d, %d]\n",
-		prefix,
-		cx2341x_menu_item(p,
-			V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE),
-		p->video_luma_median_filter_bottom,
-		p->video_luma_median_filter_top,
-		p->video_chroma_median_filter_bottom,
-		p->video_chroma_median_filter_top);
-}
-EXPORT_SYMBOL(cx2341x_log_status);
-
-
-
-/********************** NEW CODE *********************/
-
-static inline struct cx2341x_handler *to_cxhdl(struct v4l2_ctrl *ctrl)
-{
-	return container_of(ctrl->handler, struct cx2341x_handler, hdl);
-}
-
-static int cx2341x_hdl_api(struct cx2341x_handler *hdl,
-		       u32 cmd, int args, ...)
-{
-	u32 data[CX2341X_MBOX_MAX_DATA];
-	va_list vargs;
-	int i;
-
-	va_start(vargs, args);
-
-	for (i = 0; i < args; i++)
-		data[i] = va_arg(vargs, int);
-	va_end(vargs);
-	return hdl->func(hdl->priv, cmd, args, 0, data);
-}
-
-/* ctrl->handler->lock is held, so it is safe to access cur.val */
-static inline int cx2341x_neq(struct v4l2_ctrl *ctrl)
-{
-	return ctrl && ctrl->val != ctrl->cur.val;
-}
-
-static int cx2341x_try_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct cx2341x_handler *hdl = to_cxhdl(ctrl);
-	s32 val = ctrl->val;
-
-	switch (ctrl->id) {
-	case V4L2_CID_MPEG_VIDEO_B_FRAMES: {
-		/* video gop cluster */
-		int b = val + 1;
-		int gop = hdl->video_gop_size->val;
-
-		gop = b * ((gop + b - 1) / b);
-
-		/* Max GOP size = 34 */
-		while (gop > 34)
-			gop -= b;
-		hdl->video_gop_size->val = gop;
-		break;
-	}
-
-	case V4L2_CID_MPEG_STREAM_TYPE:
-		/* stream type cluster */
-		hdl->video_encoding->val =
-		    (hdl->stream_type->val == V4L2_MPEG_STREAM_TYPE_MPEG1_SS ||
-		     hdl->stream_type->val == V4L2_MPEG_STREAM_TYPE_MPEG1_VCD) ?
-			V4L2_MPEG_VIDEO_ENCODING_MPEG_1 :
-			V4L2_MPEG_VIDEO_ENCODING_MPEG_2;
-		if (hdl->video_encoding->val == V4L2_MPEG_VIDEO_ENCODING_MPEG_1)
-			/* MPEG-1 implies CBR */
-			hdl->video_bitrate_mode->val =
-				V4L2_MPEG_VIDEO_BITRATE_MODE_CBR;
-		/* peak bitrate shall be >= normal bitrate */
-		if (hdl->video_bitrate_mode->val == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR &&
-		    hdl->video_bitrate_peak->val < hdl->video_bitrate->val)
-			hdl->video_bitrate_peak->val = hdl->video_bitrate->val;
-		break;
-	}
-	return 0;
-}
-
-static int cx2341x_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	static const int mpeg_stream_type[] = {
-		0,	/* MPEG-2 PS */
-		1,	/* MPEG-2 TS */
-		2,	/* MPEG-1 SS */
-		14,	/* DVD */
-		11,	/* VCD */
-		12,	/* SVCD */
-	};
-	struct cx2341x_handler *hdl = to_cxhdl(ctrl);
-	s32 val = ctrl->val;
-	u32 props;
-	int err;
-
-	switch (ctrl->id) {
-	case V4L2_CID_MPEG_STREAM_VBI_FMT:
-		if (hdl->ops && hdl->ops->s_stream_vbi_fmt)
-			return hdl->ops->s_stream_vbi_fmt(hdl, val);
-		return 0;
-
-	case V4L2_CID_MPEG_VIDEO_ASPECT:
-		return cx2341x_hdl_api(hdl,
-			CX2341X_ENC_SET_ASPECT_RATIO, 1, val + 1);
-
-	case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE:
-		return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_GOP_CLOSURE, 1, val);
-
-	case V4L2_CID_MPEG_AUDIO_MUTE:
-		return cx2341x_hdl_api(hdl, CX2341X_ENC_MUTE_AUDIO, 1, val);
-
-	case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION:
-		return cx2341x_hdl_api(hdl,
-			CX2341X_ENC_SET_FRAME_DROP_RATE, 1, val);
-
-	case V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS:
-		return cx2341x_hdl_api(hdl, CX2341X_ENC_MISC, 2, 7, val);
-
-	case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
-		/* audio properties cluster */
-		props = (hdl->audio_sampling_freq->val << 0) |
-			(hdl->audio_mode->val << 8) |
-			(hdl->audio_mode_extension->val << 10) |
-			(hdl->audio_crc->val << 14);
-		if (hdl->audio_emphasis->val == V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17)
-			props |= 3 << 12;
-		else
-			props |= hdl->audio_emphasis->val << 12;
-
-		if (hdl->audio_encoding->val == V4L2_MPEG_AUDIO_ENCODING_AC3) {
-			props |=
-#if 1
-				/* Not sure if this MPEG Layer II setting is required */
-				((3 - V4L2_MPEG_AUDIO_ENCODING_LAYER_2) << 2) |
-#endif
-				(hdl->audio_ac3_bitrate->val << 4) |
-				(CX2341X_AUDIO_ENCODING_METHOD_AC3 << 28);
-		} else {
-			/* Assuming MPEG Layer II */
-			props |=
-				((3 - hdl->audio_encoding->val) << 2) |
-				((1 + hdl->audio_l2_bitrate->val) << 4);
-		}
-		err = cx2341x_hdl_api(hdl,
-				CX2341X_ENC_SET_AUDIO_PROPERTIES, 1, props);
-		if (err)
-			return err;
-
-		hdl->audio_properties = props;
-		if (hdl->audio_ac3_bitrate) {
-			int is_ac3 = hdl->audio_encoding->val ==
-						V4L2_MPEG_AUDIO_ENCODING_AC3;
-
-			v4l2_ctrl_activate(hdl->audio_ac3_bitrate, is_ac3);
-			v4l2_ctrl_activate(hdl->audio_l2_bitrate, !is_ac3);
-		}
-		v4l2_ctrl_activate(hdl->audio_mode_extension,
-			hdl->audio_mode->val == V4L2_MPEG_AUDIO_MODE_JOINT_STEREO);
-		if (cx2341x_neq(hdl->audio_sampling_freq) &&
-		    hdl->ops && hdl->ops->s_audio_sampling_freq)
-			return hdl->ops->s_audio_sampling_freq(hdl, hdl->audio_sampling_freq->val);
-		if (cx2341x_neq(hdl->audio_mode) &&
-		    hdl->ops && hdl->ops->s_audio_mode)
-			return hdl->ops->s_audio_mode(hdl, hdl->audio_mode->val);
-		return 0;
-
-	case V4L2_CID_MPEG_VIDEO_B_FRAMES:
-		/* video gop cluster */
-		return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_GOP_PROPERTIES, 2,
-				hdl->video_gop_size->val,
-				hdl->video_b_frames->val + 1);
-
-	case V4L2_CID_MPEG_STREAM_TYPE:
-		/* stream type cluster */
-		err = cx2341x_hdl_api(hdl,
-			CX2341X_ENC_SET_STREAM_TYPE, 1, mpeg_stream_type[val]);
-		if (err)
-			return err;
-
-		err = cx2341x_hdl_api(hdl, CX2341X_ENC_SET_BIT_RATE, 5,
-				hdl->video_bitrate_mode->val,
-				hdl->video_bitrate->val,
-				hdl->video_bitrate_peak->val / 400, 0, 0);
-		if (err)
-			return err;
-
-		v4l2_ctrl_activate(hdl->video_bitrate_mode,
-			hdl->video_encoding->val != V4L2_MPEG_VIDEO_ENCODING_MPEG_1);
-		v4l2_ctrl_activate(hdl->video_bitrate_peak,
-			hdl->video_bitrate_mode->val != V4L2_MPEG_VIDEO_BITRATE_MODE_CBR);
-		if (cx2341x_neq(hdl->video_encoding) &&
-		    hdl->ops && hdl->ops->s_video_encoding)
-			return hdl->ops->s_video_encoding(hdl, hdl->video_encoding->val);
-		return 0;
-
-	case V4L2_CID_MPEG_VIDEO_MUTE:
-		/* video mute cluster */
-		return cx2341x_hdl_api(hdl, CX2341X_ENC_MUTE_VIDEO, 1,
-				hdl->video_mute->val |
-					(hdl->video_mute_yuv->val << 8));
-
-	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE: {
-		int active_filter;
-
-		/* video filter mode */
-		err = cx2341x_hdl_api(hdl, CX2341X_ENC_SET_DNR_FILTER_MODE, 2,
-				hdl->video_spatial_filter_mode->val |
-					(hdl->video_temporal_filter_mode->val << 1),
-				hdl->video_median_filter_type->val);
-		if (err)
-			return err;
-
-		active_filter = hdl->video_spatial_filter_mode->val !=
-				V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO;
-		v4l2_ctrl_activate(hdl->video_spatial_filter, active_filter);
-		v4l2_ctrl_activate(hdl->video_luma_spatial_filter_type, active_filter);
-		v4l2_ctrl_activate(hdl->video_chroma_spatial_filter_type, active_filter);
-		active_filter = hdl->video_temporal_filter_mode->val !=
-				V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO;
-		v4l2_ctrl_activate(hdl->video_temporal_filter, active_filter);
-		active_filter = hdl->video_median_filter_type->val !=
-				V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF;
-		v4l2_ctrl_activate(hdl->video_luma_median_filter_bottom, active_filter);
-		v4l2_ctrl_activate(hdl->video_luma_median_filter_top, active_filter);
-		v4l2_ctrl_activate(hdl->video_chroma_median_filter_bottom, active_filter);
-		v4l2_ctrl_activate(hdl->video_chroma_median_filter_top, active_filter);
-		return 0;
-	}
-
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE:
-		/* video filter type cluster */
-		return cx2341x_hdl_api(hdl,
-				CX2341X_ENC_SET_SPATIAL_FILTER_TYPE, 2,
-				hdl->video_luma_spatial_filter_type->val,
-				hdl->video_chroma_spatial_filter_type->val);
-
-	case V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER:
-		/* video filter cluster */
-		return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_DNR_FILTER_PROPS, 2,
-				hdl->video_spatial_filter->val,
-				hdl->video_temporal_filter->val);
-
-	case V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP:
-		/* video median cluster */
-		return cx2341x_hdl_api(hdl, CX2341X_ENC_SET_CORING_LEVELS, 4,
-				hdl->video_luma_median_filter_bottom->val,
-				hdl->video_luma_median_filter_top->val,
-				hdl->video_chroma_median_filter_bottom->val,
-				hdl->video_chroma_median_filter_top->val);
-	}
-	return -EINVAL;
-}
-
-static const struct v4l2_ctrl_ops cx2341x_ops = {
-	.try_ctrl = cx2341x_try_ctrl,
-	.s_ctrl = cx2341x_s_ctrl,
-};
-
-static struct v4l2_ctrl *cx2341x_ctrl_new_custom(struct v4l2_ctrl_handler *hdl,
-			u32 id, s32 min, s32 max, s32 step, s32 def)
-{
-	struct v4l2_ctrl_config cfg;
-
-	cx2341x_ctrl_fill(id, &cfg.name, &cfg.type, &min, &max, &step, &def, &cfg.flags);
-	cfg.ops = &cx2341x_ops;
-	cfg.id = id;
-	cfg.min = min;
-	cfg.max = max;
-	cfg.def = def;
-	if (cfg.type == V4L2_CTRL_TYPE_MENU) {
-		cfg.step = 0;
-		cfg.menu_skip_mask = step;
-		cfg.qmenu = cx2341x_get_menu(id);
-	} else {
-		cfg.step = step;
-		cfg.menu_skip_mask = 0;
-	}
-	return v4l2_ctrl_new_custom(hdl, &cfg, NULL);
-}
-
-static struct v4l2_ctrl *cx2341x_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
-			u32 id, s32 min, s32 max, s32 step, s32 def)
-{
-	return v4l2_ctrl_new_std(hdl, &cx2341x_ops, id, min, max, step, def);
-}
-
-static struct v4l2_ctrl *cx2341x_ctrl_new_menu(struct v4l2_ctrl_handler *hdl,
-			u32 id, s32 max, s32 mask, s32 def)
-{
-	return v4l2_ctrl_new_std_menu(hdl, &cx2341x_ops, id, max, mask, def);
-}
-
-int cx2341x_handler_init(struct cx2341x_handler *cxhdl,
-			 unsigned nr_of_controls_hint)
-{
-	struct v4l2_ctrl_handler *hdl = &cxhdl->hdl;
-	u32 caps = cxhdl->capabilities;
-	int has_sliced_vbi = caps & CX2341X_CAP_HAS_SLICED_VBI;
-	int has_ac3 = caps & CX2341X_CAP_HAS_AC3;
-	int has_ts = caps & CX2341X_CAP_HAS_TS;
-
-	cxhdl->width = 720;
-	cxhdl->height = 480;
-
-	v4l2_ctrl_handler_init(hdl, nr_of_controls_hint);
-
-	/* Add controls in ascending control ID order for fastest
-	   insertion time. */
-	cxhdl->stream_type = cx2341x_ctrl_new_menu(hdl,
-			V4L2_CID_MPEG_STREAM_TYPE,
-			V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD, has_ts ? 0 : 2,
-			V4L2_MPEG_STREAM_TYPE_MPEG2_PS);
-	cxhdl->stream_vbi_fmt = cx2341x_ctrl_new_menu(hdl,
-			V4L2_CID_MPEG_STREAM_VBI_FMT,
-			V4L2_MPEG_STREAM_VBI_FMT_IVTV, has_sliced_vbi ? 0 : 2,
-			V4L2_MPEG_STREAM_VBI_FMT_NONE);
-	cxhdl->audio_sampling_freq = cx2341x_ctrl_new_menu(hdl,
-			V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ,
-			V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000, 0,
-			V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000);
-	cxhdl->audio_encoding = cx2341x_ctrl_new_menu(hdl,
-			V4L2_CID_MPEG_AUDIO_ENCODING,
-			V4L2_MPEG_AUDIO_ENCODING_AC3, has_ac3 ? ~0x12 : ~0x2,
-			V4L2_MPEG_AUDIO_ENCODING_LAYER_2);
-	cxhdl->audio_l2_bitrate = cx2341x_ctrl_new_menu(hdl,
-			V4L2_CID_MPEG_AUDIO_L2_BITRATE,
-			V4L2_MPEG_AUDIO_L2_BITRATE_384K, 0x1ff,
-			V4L2_MPEG_AUDIO_L2_BITRATE_224K);
-	cxhdl->audio_mode = cx2341x_ctrl_new_menu(hdl,
-			V4L2_CID_MPEG_AUDIO_MODE,
-			V4L2_MPEG_AUDIO_MODE_MONO, 0,
-			V4L2_MPEG_AUDIO_MODE_STEREO);
-	cxhdl->audio_mode_extension = cx2341x_ctrl_new_menu(hdl,
-			V4L2_CID_MPEG_AUDIO_MODE_EXTENSION,
-			V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_16, 0,
-			V4L2_MPEG_AUDIO_MODE_EXTENSION_BOUND_4);
-	cxhdl->audio_emphasis = cx2341x_ctrl_new_menu(hdl,
-			V4L2_CID_MPEG_AUDIO_EMPHASIS,
-			V4L2_MPEG_AUDIO_EMPHASIS_CCITT_J17, 0,
-			V4L2_MPEG_AUDIO_EMPHASIS_NONE);
-	cxhdl->audio_crc = cx2341x_ctrl_new_menu(hdl,
-			V4L2_CID_MPEG_AUDIO_CRC,
-			V4L2_MPEG_AUDIO_CRC_CRC16, 0,
-			V4L2_MPEG_AUDIO_CRC_NONE);
-
-	cx2341x_ctrl_new_std(hdl, V4L2_CID_MPEG_AUDIO_MUTE, 0, 1, 1, 0);
-	if (has_ac3)
-		cxhdl->audio_ac3_bitrate = cx2341x_ctrl_new_menu(hdl,
-				V4L2_CID_MPEG_AUDIO_AC3_BITRATE,
-				V4L2_MPEG_AUDIO_AC3_BITRATE_448K, 0x03,
-				V4L2_MPEG_AUDIO_AC3_BITRATE_224K);
-	cxhdl->video_encoding = cx2341x_ctrl_new_menu(hdl,
-			V4L2_CID_MPEG_VIDEO_ENCODING,
-			V4L2_MPEG_VIDEO_ENCODING_MPEG_2, 0,
-			V4L2_MPEG_VIDEO_ENCODING_MPEG_2);
-	cx2341x_ctrl_new_menu(hdl,
-			V4L2_CID_MPEG_VIDEO_ASPECT,
-			V4L2_MPEG_VIDEO_ASPECT_221x100, 0,
-			V4L2_MPEG_VIDEO_ASPECT_4x3);
-	cxhdl->video_b_frames = cx2341x_ctrl_new_std(hdl,
-			V4L2_CID_MPEG_VIDEO_B_FRAMES, 0, 33, 1, 2);
-	cxhdl->video_gop_size = cx2341x_ctrl_new_std(hdl,
-			V4L2_CID_MPEG_VIDEO_GOP_SIZE,
-			1, 34, 1, cxhdl->is_50hz ? 12 : 15);
-	cx2341x_ctrl_new_std(hdl, V4L2_CID_MPEG_VIDEO_GOP_CLOSURE, 0, 1, 1, 1);
-	cxhdl->video_bitrate_mode = cx2341x_ctrl_new_menu(hdl,
-			V4L2_CID_MPEG_VIDEO_BITRATE_MODE,
-			V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, 0,
-			V4L2_MPEG_VIDEO_BITRATE_MODE_VBR);
-	cxhdl->video_bitrate = cx2341x_ctrl_new_std(hdl,
-			V4L2_CID_MPEG_VIDEO_BITRATE,
-			0, 27000000, 1, 6000000);
-	cxhdl->video_bitrate_peak = cx2341x_ctrl_new_std(hdl,
-			V4L2_CID_MPEG_VIDEO_BITRATE_PEAK,
-			0, 27000000, 1, 8000000);
-	cx2341x_ctrl_new_std(hdl,
-			V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION, 0, 255, 1, 0);
-	cxhdl->video_mute = cx2341x_ctrl_new_std(hdl,
-			V4L2_CID_MPEG_VIDEO_MUTE, 0, 1, 1, 0);
-	cxhdl->video_mute_yuv = cx2341x_ctrl_new_std(hdl,
-			V4L2_CID_MPEG_VIDEO_MUTE_YUV, 0, 0xffffff, 1, 0x008080);
-
-	/* CX23415/6 specific */
-	cxhdl->video_spatial_filter_mode = cx2341x_ctrl_new_custom(hdl,
-			V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE,
-			V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL,
-			V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO, 0,
-			V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL);
-	cxhdl->video_spatial_filter = cx2341x_ctrl_new_custom(hdl,
-			V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER,
-			0, 15, 1, 0);
-	cxhdl->video_luma_spatial_filter_type = cx2341x_ctrl_new_custom(hdl,
-			V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE,
-			V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_OFF,
-			V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_2D_SYM_NON_SEPARABLE,
-			0,
-			V4L2_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE_1D_HOR);
-	cxhdl->video_chroma_spatial_filter_type = cx2341x_ctrl_new_custom(hdl,
-			V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE,
-			V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_OFF,
-			V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR,
-			0,
-			V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR);
-	cxhdl->video_temporal_filter_mode = cx2341x_ctrl_new_custom(hdl,
-			V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE,
-			V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL,
-			V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO,
-			0,
-			V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_MANUAL);
-	cxhdl->video_temporal_filter = cx2341x_ctrl_new_custom(hdl,
-			V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER,
-			0, 31, 1, 8);
-	cxhdl->video_median_filter_type = cx2341x_ctrl_new_custom(hdl,
-			V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE,
-			V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF,
-			V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG,
-			0,
-			V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_OFF);
-	cxhdl->video_luma_median_filter_bottom = cx2341x_ctrl_new_custom(hdl,
-			V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM,
-			0, 255, 1, 0);
-	cxhdl->video_luma_median_filter_top = cx2341x_ctrl_new_custom(hdl,
-			V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP,
-			0, 255, 1, 255);
-	cxhdl->video_chroma_median_filter_bottom = cx2341x_ctrl_new_custom(hdl,
-			V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM,
-			0, 255, 1, 0);
-	cxhdl->video_chroma_median_filter_top = cx2341x_ctrl_new_custom(hdl,
-			V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP,
-			0, 255, 1, 255);
-	cx2341x_ctrl_new_custom(hdl, V4L2_CID_MPEG_CX2341X_STREAM_INSERT_NAV_PACKETS,
-			0, 1, 1, 0);
-
-	if (hdl->error) {
-		int err = hdl->error;
-
-		v4l2_ctrl_handler_free(hdl);
-		return err;
-	}
-
-	v4l2_ctrl_cluster(8, &cxhdl->audio_sampling_freq);
-	v4l2_ctrl_cluster(2, &cxhdl->video_b_frames);
-	v4l2_ctrl_cluster(5, &cxhdl->stream_type);
-	v4l2_ctrl_cluster(2, &cxhdl->video_mute);
-	v4l2_ctrl_cluster(3, &cxhdl->video_spatial_filter_mode);
-	v4l2_ctrl_cluster(2, &cxhdl->video_luma_spatial_filter_type);
-	v4l2_ctrl_cluster(2, &cxhdl->video_spatial_filter);
-	v4l2_ctrl_cluster(4, &cxhdl->video_luma_median_filter_top);
-
-	return 0;
-}
-EXPORT_SYMBOL(cx2341x_handler_init);
-
-void cx2341x_handler_set_50hz(struct cx2341x_handler *cxhdl, int is_50hz)
-{
-	cxhdl->is_50hz = is_50hz;
-	cxhdl->video_gop_size->default_value = cxhdl->is_50hz ? 12 : 15;
-}
-EXPORT_SYMBOL(cx2341x_handler_set_50hz);
-
-int cx2341x_handler_setup(struct cx2341x_handler *cxhdl)
-{
-	int h = cxhdl->height;
-	int w = cxhdl->width;
-	int err;
-
-	err = cx2341x_hdl_api(cxhdl, CX2341X_ENC_SET_OUTPUT_PORT, 2, cxhdl->port, 0);
-	if (err)
-		return err;
-	err = cx2341x_hdl_api(cxhdl, CX2341X_ENC_SET_FRAME_RATE, 1, cxhdl->is_50hz);
-	if (err)
-		return err;
-
-	if (v4l2_ctrl_g_ctrl(cxhdl->video_encoding) == V4L2_MPEG_VIDEO_ENCODING_MPEG_1) {
-		w /= 2;
-		h /= 2;
-	}
-	err = cx2341x_hdl_api(cxhdl, CX2341X_ENC_SET_FRAME_SIZE, 2, h, w);
-	if (err)
-		return err;
-	return v4l2_ctrl_handler_setup(&cxhdl->hdl);
-}
-EXPORT_SYMBOL(cx2341x_handler_setup);
-
-void cx2341x_handler_set_busy(struct cx2341x_handler *cxhdl, int busy)
-{
-	v4l2_ctrl_grab(cxhdl->audio_sampling_freq, busy);
-	v4l2_ctrl_grab(cxhdl->audio_encoding, busy);
-	v4l2_ctrl_grab(cxhdl->audio_l2_bitrate, busy);
-	v4l2_ctrl_grab(cxhdl->audio_ac3_bitrate, busy);
-	v4l2_ctrl_grab(cxhdl->stream_vbi_fmt, busy);
-	v4l2_ctrl_grab(cxhdl->stream_type, busy);
-	v4l2_ctrl_grab(cxhdl->video_bitrate_mode, busy);
-	v4l2_ctrl_grab(cxhdl->video_bitrate, busy);
-	v4l2_ctrl_grab(cxhdl->video_bitrate_peak, busy);
-}
-EXPORT_SYMBOL(cx2341x_handler_set_busy);
diff --git a/drivers/media/video/cx25840/Kconfig b/drivers/media/video/cx25840/Kconfig
deleted file mode 100644
index 451133a..0000000
--- a/drivers/media/video/cx25840/Kconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-config VIDEO_CX25840
-	tristate "Conexant CX2584x audio/video decoders"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Conexant CX2584x audio/video decoders.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cx25840
diff --git a/drivers/media/video/cx25840/Makefile b/drivers/media/video/cx25840/Makefile
deleted file mode 100644
index dc40dde..0000000
--- a/drivers/media/video/cx25840/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-cx25840-objs    := cx25840-core.o cx25840-audio.o cx25840-firmware.o \
-		   cx25840-vbi.o cx25840-ir.o
-
-obj-$(CONFIG_VIDEO_CX25840) += cx25840.o
-
-ccflags-y += -Idrivers/media/video
diff --git a/drivers/media/video/cx25840/cx25840-audio.c b/drivers/media/video/cx25840/cx25840-audio.c
deleted file mode 100644
index 34b96c7..0000000
--- a/drivers/media/video/cx25840/cx25840-audio.c
+++ /dev/null
@@ -1,571 +0,0 @@
-/* cx25840 audio functions
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-
-#include <linux/videodev2.h>
-#include <linux/i2c.h>
-#include <media/v4l2-common.h>
-#include <media/cx25840.h>
-
-#include "cx25840-core.h"
-
-/*
- * Note: The PLL and SRC parameters are based on a reference frequency that
- * would ideally be:
- *
- * NTSC Color subcarrier freq * 8 = 4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz
- *
- * However, it's not the exact reference frequency that matters, only that the
- * firmware and modules that comprise the driver for a particular board all
- * use the same value (close to the ideal value).
- *
- * Comments below will note which reference frequency is assumed for various
- * parameters.  They will usually be one of
- *
- *	ref_freq = 28.636360 MHz
- *		or
- *	ref_freq = 28.636363 MHz
- */
-
-static int cx25840_set_audclk_freq(struct i2c_client *client, u32 freq)
-{
-	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-
-	if (state->aud_input != CX25840_AUDIO_SERIAL) {
-		switch (freq) {
-		case 32000:
-			/*
-			 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
-			 * AUX_PLL Integer = 0x06, AUX PLL Post Divider = 0x10
-			 */
-			cx25840_write4(client, 0x108, 0x1006040f);
-
-			/*
-			 * VID_PLL Fraction (register 0x10c) = 0x2be2fe
-			 * 28636360 * 0xf.15f17f0/4 = 108 MHz
-			 * 432 MHz pre-postdivide
-			 */
-
-			/*
-			 * AUX_PLL Fraction = 0x1bb39ee
-			 * 28636363 * 0x6.dd9cf70/0x10 = 32000 * 384
-			 * 196.6 MHz pre-postdivide
-			 * FIXME < 200 MHz is out of specified valid range
-			 * FIXME 28636363 ref_freq doesn't match VID PLL ref
-			 */
-			cx25840_write4(client, 0x110, 0x01bb39ee);
-
-			/*
-			 * SA_MCLK_SEL = 1
-			 * SA_MCLK_DIV = 0x10 = 384/384 * AUX_PLL post dvivider
-			 */
-			cx25840_write(client, 0x127, 0x50);
-
-			if (is_cx2583x(state))
-				break;
-
-			/* src3/4/6_ctl */
-			/* 0x1.f77f = (4 * 28636360/8 * 2/455) / 32000 */
-			cx25840_write4(client, 0x900, 0x0801f77f);
-			cx25840_write4(client, 0x904, 0x0801f77f);
-			cx25840_write4(client, 0x90c, 0x0801f77f);
-			break;
-
-		case 44100:
-			/*
-			 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
-			 * AUX_PLL Integer = 0x09, AUX PLL Post Divider = 0x10
-			 */
-			cx25840_write4(client, 0x108, 0x1009040f);
-
-			/*
-			 * VID_PLL Fraction (register 0x10c) = 0x2be2fe
-			 * 28636360 * 0xf.15f17f0/4 = 108 MHz
-			 * 432 MHz pre-postdivide
-			 */
-
-			/*
-			 * AUX_PLL Fraction = 0x0ec6bd6
-			 * 28636363 * 0x9.7635eb0/0x10 = 44100 * 384
-			 * 271 MHz pre-postdivide
-			 * FIXME 28636363 ref_freq doesn't match VID PLL ref
-			 */
-			cx25840_write4(client, 0x110, 0x00ec6bd6);
-
-			/*
-			 * SA_MCLK_SEL = 1
-			 * SA_MCLK_DIV = 0x10 = 384/384 * AUX_PLL post dvivider
-			 */
-			cx25840_write(client, 0x127, 0x50);
-
-			if (is_cx2583x(state))
-				break;
-
-			/* src3/4/6_ctl */
-			/* 0x1.6d59 = (4 * 28636360/8 * 2/455) / 44100 */
-			cx25840_write4(client, 0x900, 0x08016d59);
-			cx25840_write4(client, 0x904, 0x08016d59);
-			cx25840_write4(client, 0x90c, 0x08016d59);
-			break;
-
-		case 48000:
-			/*
-			 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
-			 * AUX_PLL Integer = 0x0a, AUX PLL Post Divider = 0x10
-			 */
-			cx25840_write4(client, 0x108, 0x100a040f);
-
-			/*
-			 * VID_PLL Fraction (register 0x10c) = 0x2be2fe
-			 * 28636360 * 0xf.15f17f0/4 = 108 MHz
-			 * 432 MHz pre-postdivide
-			 */
-
-			/*
-			 * AUX_PLL Fraction = 0x098d6e5
-			 * 28636363 * 0xa.4c6b728/0x10 = 48000 * 384
-			 * 295 MHz pre-postdivide
-			 * FIXME 28636363 ref_freq doesn't match VID PLL ref
-			 */
-			cx25840_write4(client, 0x110, 0x0098d6e5);
-
-			/*
-			 * SA_MCLK_SEL = 1
-			 * SA_MCLK_DIV = 0x10 = 384/384 * AUX_PLL post dvivider
-			 */
-			cx25840_write(client, 0x127, 0x50);
-
-			if (is_cx2583x(state))
-				break;
-
-			/* src3/4/6_ctl */
-			/* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */
-			cx25840_write4(client, 0x900, 0x08014faa);
-			cx25840_write4(client, 0x904, 0x08014faa);
-			cx25840_write4(client, 0x90c, 0x08014faa);
-			break;
-		}
-	} else {
-		switch (freq) {
-		case 32000:
-			/*
-			 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
-			 * AUX_PLL Integer = 0x08, AUX PLL Post Divider = 0x1e
-			 */
-			cx25840_write4(client, 0x108, 0x1e08040f);
-
-			/*
-			 * VID_PLL Fraction (register 0x10c) = 0x2be2fe
-			 * 28636360 * 0xf.15f17f0/4 = 108 MHz
-			 * 432 MHz pre-postdivide
-			 */
-
-			/*
-			 * AUX_PLL Fraction = 0x12a0869
-			 * 28636363 * 0x8.9504348/0x1e = 32000 * 256
-			 * 246 MHz pre-postdivide
-			 * FIXME 28636363 ref_freq doesn't match VID PLL ref
-			 */
-			cx25840_write4(client, 0x110, 0x012a0869);
-
-			/*
-			 * SA_MCLK_SEL = 1
-			 * SA_MCLK_DIV = 0x14 = 256/384 * AUX_PLL post dvivider
-			 */
-			cx25840_write(client, 0x127, 0x54);
-
-			if (is_cx2583x(state))
-				break;
-
-			/* src1_ctl */
-			/* 0x1.0000 = 32000/32000 */
-			cx25840_write4(client, 0x8f8, 0x08010000);
-
-			/* src3/4/6_ctl */
-			/* 0x2.0000 = 2 * (32000/32000) */
-			cx25840_write4(client, 0x900, 0x08020000);
-			cx25840_write4(client, 0x904, 0x08020000);
-			cx25840_write4(client, 0x90c, 0x08020000);
-			break;
-
-		case 44100:
-			/*
-			 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
-			 * AUX_PLL Integer = 0x09, AUX PLL Post Divider = 0x18
-			 */
-			cx25840_write4(client, 0x108, 0x1809040f);
-
-			/*
-			 * VID_PLL Fraction (register 0x10c) = 0x2be2fe
-			 * 28636360 * 0xf.15f17f0/4 = 108 MHz
-			 * 432 MHz pre-postdivide
-			 */
-
-			/*
-			 * AUX_PLL Fraction = 0x0ec6bd6
-			 * 28636363 * 0x9.7635eb0/0x18 = 44100 * 256
-			 * 271 MHz pre-postdivide
-			 * FIXME 28636363 ref_freq doesn't match VID PLL ref
-			 */
-			cx25840_write4(client, 0x110, 0x00ec6bd6);
-
-			/*
-			 * SA_MCLK_SEL = 1
-			 * SA_MCLK_DIV = 0x10 = 256/384 * AUX_PLL post dvivider
-			 */
-			cx25840_write(client, 0x127, 0x50);
-
-			if (is_cx2583x(state))
-				break;
-
-			/* src1_ctl */
-			/* 0x1.60cd = 44100/32000 */
-			cx25840_write4(client, 0x8f8, 0x080160cd);
-
-			/* src3/4/6_ctl */
-			/* 0x1.7385 = 2 * (32000/44100) */
-			cx25840_write4(client, 0x900, 0x08017385);
-			cx25840_write4(client, 0x904, 0x08017385);
-			cx25840_write4(client, 0x90c, 0x08017385);
-			break;
-
-		case 48000:
-			/*
-			 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
-			 * AUX_PLL Integer = 0x0a, AUX PLL Post Divider = 0x18
-			 */
-			cx25840_write4(client, 0x108, 0x180a040f);
-
-			/*
-			 * VID_PLL Fraction (register 0x10c) = 0x2be2fe
-			 * 28636360 * 0xf.15f17f0/4 = 108 MHz
-			 * 432 MHz pre-postdivide
-			 */
-
-			/*
-			 * AUX_PLL Fraction = 0x098d6e5
-			 * 28636363 * 0xa.4c6b728/0x18 = 48000 * 256
-			 * 295 MHz pre-postdivide
-			 * FIXME 28636363 ref_freq doesn't match VID PLL ref
-			 */
-			cx25840_write4(client, 0x110, 0x0098d6e5);
-
-			/*
-			 * SA_MCLK_SEL = 1
-			 * SA_MCLK_DIV = 0x10 = 256/384 * AUX_PLL post dvivider
-			 */
-			cx25840_write(client, 0x127, 0x50);
-
-			if (is_cx2583x(state))
-				break;
-
-			/* src1_ctl */
-			/* 0x1.8000 = 48000/32000 */
-			cx25840_write4(client, 0x8f8, 0x08018000);
-
-			/* src3/4/6_ctl */
-			/* 0x1.5555 = 2 * (32000/48000) */
-			cx25840_write4(client, 0x900, 0x08015555);
-			cx25840_write4(client, 0x904, 0x08015555);
-			cx25840_write4(client, 0x90c, 0x08015555);
-			break;
-		}
-	}
-
-	state->audclk_freq = freq;
-
-	return 0;
-}
-
-static inline int cx25836_set_audclk_freq(struct i2c_client *client, u32 freq)
-{
-	return cx25840_set_audclk_freq(client, freq);
-}
-
-static int cx23885_set_audclk_freq(struct i2c_client *client, u32 freq)
-{
-	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-
-	if (state->aud_input != CX25840_AUDIO_SERIAL) {
-		switch (freq) {
-		case 32000:
-		case 44100:
-		case 48000:
-			/* We don't have register values
-			 * so avoid destroying registers. */
-			/* FIXME return -EINVAL; */
-			break;
-		}
-	} else {
-		switch (freq) {
-		case 32000:
-		case 44100:
-			/* We don't have register values
-			 * so avoid destroying registers. */
-			/* FIXME return -EINVAL; */
-			break;
-
-		case 48000:
-			/* src1_ctl */
-			/* 0x1.867c = 48000 / (2 * 28636360/8 * 2/455) */
-			cx25840_write4(client, 0x8f8, 0x0801867c);
-
-			/* src3/4/6_ctl */
-			/* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */
-			cx25840_write4(client, 0x900, 0x08014faa);
-			cx25840_write4(client, 0x904, 0x08014faa);
-			cx25840_write4(client, 0x90c, 0x08014faa);
-			break;
-		}
-	}
-
-	state->audclk_freq = freq;
-
-	return 0;
-}
-
-static int cx231xx_set_audclk_freq(struct i2c_client *client, u32 freq)
-{
-	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-
-	if (state->aud_input != CX25840_AUDIO_SERIAL) {
-		switch (freq) {
-		case 32000:
-			/* src3/4/6_ctl */
-			/* 0x1.f77f = (4 * 28636360/8 * 2/455) / 32000 */
-			cx25840_write4(client, 0x900, 0x0801f77f);
-			cx25840_write4(client, 0x904, 0x0801f77f);
-			cx25840_write4(client, 0x90c, 0x0801f77f);
-			break;
-
-		case 44100:
-			/* src3/4/6_ctl */
-			/* 0x1.6d59 = (4 * 28636360/8 * 2/455) / 44100 */
-			cx25840_write4(client, 0x900, 0x08016d59);
-			cx25840_write4(client, 0x904, 0x08016d59);
-			cx25840_write4(client, 0x90c, 0x08016d59);
-			break;
-
-		case 48000:
-			/* src3/4/6_ctl */
-			/* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */
-			cx25840_write4(client, 0x900, 0x08014faa);
-			cx25840_write4(client, 0x904, 0x08014faa);
-			cx25840_write4(client, 0x90c, 0x08014faa);
-			break;
-		}
-	} else {
-		switch (freq) {
-		/* FIXME These cases make different assumptions about audclk */
-		case 32000:
-			/* src1_ctl */
-			/* 0x1.0000 = 32000/32000 */
-			cx25840_write4(client, 0x8f8, 0x08010000);
-
-			/* src3/4/6_ctl */
-			/* 0x2.0000 = 2 * (32000/32000) */
-			cx25840_write4(client, 0x900, 0x08020000);
-			cx25840_write4(client, 0x904, 0x08020000);
-			cx25840_write4(client, 0x90c, 0x08020000);
-			break;
-
-		case 44100:
-			/* src1_ctl */
-			/* 0x1.60cd = 44100/32000 */
-			cx25840_write4(client, 0x8f8, 0x080160cd);
-
-			/* src3/4/6_ctl */
-			/* 0x1.7385 = 2 * (32000/44100) */
-			cx25840_write4(client, 0x900, 0x08017385);
-			cx25840_write4(client, 0x904, 0x08017385);
-			cx25840_write4(client, 0x90c, 0x08017385);
-			break;
-
-		case 48000:
-			/* src1_ctl */
-			/* 0x1.867c = 48000 / (2 * 28636360/8 * 2/455) */
-			cx25840_write4(client, 0x8f8, 0x0801867c);
-
-			/* src3/4/6_ctl */
-			/* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */
-			cx25840_write4(client, 0x900, 0x08014faa);
-			cx25840_write4(client, 0x904, 0x08014faa);
-			cx25840_write4(client, 0x90c, 0x08014faa);
-			break;
-		}
-	}
-
-	state->audclk_freq = freq;
-
-	return 0;
-}
-
-static int set_audclk_freq(struct i2c_client *client, u32 freq)
-{
-	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-
-	if (freq != 32000 && freq != 44100 && freq != 48000)
-		return -EINVAL;
-
-	if (is_cx231xx(state))
-		return cx231xx_set_audclk_freq(client, freq);
-
-	if (is_cx2388x(state))
-		return cx23885_set_audclk_freq(client, freq);
-
-	if (is_cx2583x(state))
-		return cx25836_set_audclk_freq(client, freq);
-
-	return cx25840_set_audclk_freq(client, freq);
-}
-
-void cx25840_audio_set_path(struct i2c_client *client)
-{
-	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-
-	if (!is_cx2583x(state)) {
-		/* assert soft reset */
-		cx25840_and_or(client, 0x810, ~0x1, 0x01);
-
-		/* stop microcontroller */
-		cx25840_and_or(client, 0x803, ~0x10, 0);
-
-		/* Mute everything to prevent the PFFT! */
-		cx25840_write(client, 0x8d3, 0x1f);
-
-		if (state->aud_input == CX25840_AUDIO_SERIAL) {
-			/* Set Path1 to Serial Audio Input */
-			cx25840_write4(client, 0x8d0, 0x01011012);
-
-			/* The microcontroller should not be started for the
-			 * non-tuner inputs: autodetection is specific for
-			 * TV audio. */
-		} else {
-			/* Set Path1 to Analog Demod Main Channel */
-			cx25840_write4(client, 0x8d0, 0x1f063870);
-		}
-	}
-
-	set_audclk_freq(client, state->audclk_freq);
-
-	if (!is_cx2583x(state)) {
-		if (state->aud_input != CX25840_AUDIO_SERIAL) {
-			/* When the microcontroller detects the
-			 * audio format, it will unmute the lines */
-			cx25840_and_or(client, 0x803, ~0x10, 0x10);
-		}
-
-		/* deassert soft reset */
-		cx25840_and_or(client, 0x810, ~0x1, 0x00);
-
-		/* Ensure the controller is running when we exit */
-		if (is_cx2388x(state) || is_cx231xx(state))
-			cx25840_and_or(client, 0x803, ~0x10, 0x10);
-	}
-}
-
-static void set_volume(struct i2c_client *client, int volume)
-{
-	int vol;
-
-	/* Convert the volume to msp3400 values (0-127) */
-	vol = volume >> 9;
-
-	/* now scale it up to cx25840 values
-	 * -114dB to -96dB maps to 0
-	 * this should be 19, but in my testing that was 4dB too loud */
-	if (vol <= 23) {
-		vol = 0;
-	} else {
-		vol -= 23;
-	}
-
-	/* PATH1_VOLUME */
-	cx25840_write(client, 0x8d4, 228 - (vol * 2));
-}
-
-static void set_balance(struct i2c_client *client, int balance)
-{
-	int bal = balance >> 8;
-	if (bal > 0x80) {
-		/* PATH1_BAL_LEFT */
-		cx25840_and_or(client, 0x8d5, 0x7f, 0x80);
-		/* PATH1_BAL_LEVEL */
-		cx25840_and_or(client, 0x8d5, ~0x7f, bal & 0x7f);
-	} else {
-		/* PATH1_BAL_LEFT */
-		cx25840_and_or(client, 0x8d5, 0x7f, 0x00);
-		/* PATH1_BAL_LEVEL */
-		cx25840_and_or(client, 0x8d5, ~0x7f, 0x80 - bal);
-	}
-}
-
-int cx25840_s_clock_freq(struct v4l2_subdev *sd, u32 freq)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct cx25840_state *state = to_state(sd);
-	int retval;
-
-	if (!is_cx2583x(state))
-		cx25840_and_or(client, 0x810, ~0x1, 1);
-	if (state->aud_input != CX25840_AUDIO_SERIAL) {
-		cx25840_and_or(client, 0x803, ~0x10, 0);
-		cx25840_write(client, 0x8d3, 0x1f);
-	}
-	retval = set_audclk_freq(client, freq);
-	if (state->aud_input != CX25840_AUDIO_SERIAL)
-		cx25840_and_or(client, 0x803, ~0x10, 0x10);
-	if (!is_cx2583x(state))
-		cx25840_and_or(client, 0x810, ~0x1, 0);
-	return retval;
-}
-
-static int cx25840_audio_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-	struct cx25840_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_VOLUME:
-		if (state->mute->val)
-			set_volume(client, 0);
-		else
-			set_volume(client, state->volume->val);
-		break;
-	case V4L2_CID_AUDIO_BASS:
-		/* PATH1_EQ_BASS_VOL */
-		cx25840_and_or(client, 0x8d9, ~0x3f,
-					48 - (ctrl->val * 48 / 0xffff));
-		break;
-	case V4L2_CID_AUDIO_TREBLE:
-		/* PATH1_EQ_TREBLE_VOL */
-		cx25840_and_or(client, 0x8db, ~0x3f,
-					48 - (ctrl->val * 48 / 0xffff));
-		break;
-	case V4L2_CID_AUDIO_BALANCE:
-		set_balance(client, ctrl->val);
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-const struct v4l2_ctrl_ops cx25840_audio_ctrl_ops = {
-	.s_ctrl = cx25840_audio_s_ctrl,
-};
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
deleted file mode 100644
index d8eac3e..0000000
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ /dev/null
@@ -1,5340 +0,0 @@
-/* cx25840 - Conexant CX25840 audio/video decoder driver
- *
- * Copyright (C) 2004 Ulf Eklund
- *
- * Based on the saa7115 driver and on the first version of Chris Kennedy's
- * cx25840 driver.
- *
- * Changes by Tyler Trafford <tatrafford@comcast.net>
- *    - cleanup/rewrite for V4L2 API (2005)
- *
- * VBI support by Hans Verkuil <hverkuil@xs4all.nl>.
- *
- * NTSC sliced VBI support by Christopher Neufeld <television@cneufeld.ca>
- * with additional fixes by Hans Verkuil <hverkuil@xs4all.nl>.
- *
- * CX23885 support by Steven Toth <stoth@linuxtv.org>.
- *
- * CX2388[578] IRQ handling, IO Pin mux configuration and other small fixes are
- * Copyright (C) 2010 Andy Walls <awalls@md.metrocast.net>
- *
- * CX23888 DIF support for the HVR1850
- * Copyright (C) 2011 Steven Toth <stoth@kernellabs.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/videodev2.h>
-#include <linux/i2c.h>
-#include <linux/delay.h>
-#include <linux/math64.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/cx25840.h>
-
-#include "cx25840-core.h"
-
-MODULE_DESCRIPTION("Conexant CX25840 audio/video decoder driver");
-MODULE_AUTHOR("Ulf Eklund, Chris Kennedy, Hans Verkuil, Tyler Trafford");
-MODULE_LICENSE("GPL");
-
-#define CX25840_VID_INT_STAT_REG 0x410
-#define CX25840_VID_INT_STAT_BITS 0x0000ffff
-#define CX25840_VID_INT_MASK_BITS 0xffff0000
-#define CX25840_VID_INT_MASK_SHFT 16
-#define CX25840_VID_INT_MASK_REG 0x412
-
-#define CX23885_AUD_MC_INT_MASK_REG 0x80c
-#define CX23885_AUD_MC_INT_STAT_BITS 0xffff0000
-#define CX23885_AUD_MC_INT_CTRL_BITS 0x0000ffff
-#define CX23885_AUD_MC_INT_STAT_SHFT 16
-
-#define CX25840_AUD_INT_CTRL_REG 0x812
-#define CX25840_AUD_INT_STAT_REG 0x813
-
-#define CX23885_PIN_CTRL_IRQ_REG 0x123
-#define CX23885_PIN_CTRL_IRQ_IR_STAT  0x40
-#define CX23885_PIN_CTRL_IRQ_AUD_STAT 0x20
-#define CX23885_PIN_CTRL_IRQ_VID_STAT 0x10
-
-#define CX25840_IR_STATS_REG	0x210
-#define CX25840_IR_IRQEN_REG	0x214
-
-static int cx25840_debug;
-
-module_param_named(debug,cx25840_debug, int, 0644);
-
-MODULE_PARM_DESC(debug, "Debugging messages [0=Off (default) 1=On]");
-
-
-/* ----------------------------------------------------------------------- */
-static void cx23888_std_setup(struct i2c_client *client);
-
-int cx25840_write(struct i2c_client *client, u16 addr, u8 value)
-{
-	u8 buffer[3];
-	buffer[0] = addr >> 8;
-	buffer[1] = addr & 0xff;
-	buffer[2] = value;
-	return i2c_master_send(client, buffer, 3);
-}
-
-int cx25840_write4(struct i2c_client *client, u16 addr, u32 value)
-{
-	u8 buffer[6];
-	buffer[0] = addr >> 8;
-	buffer[1] = addr & 0xff;
-	buffer[2] = value & 0xff;
-	buffer[3] = (value >> 8) & 0xff;
-	buffer[4] = (value >> 16) & 0xff;
-	buffer[5] = value >> 24;
-	return i2c_master_send(client, buffer, 6);
-}
-
-u8 cx25840_read(struct i2c_client * client, u16 addr)
-{
-	struct i2c_msg msgs[2];
-	u8 tx_buf[2], rx_buf[1];
-
-	/* Write register address */
-	tx_buf[0] = addr >> 8;
-	tx_buf[1] = addr & 0xff;
-	msgs[0].addr = client->addr;
-	msgs[0].flags = 0;
-	msgs[0].len = 2;
-	msgs[0].buf = (char *) tx_buf;
-
-	/* Read data from register */
-	msgs[1].addr = client->addr;
-	msgs[1].flags = I2C_M_RD;
-	msgs[1].len = 1;
-	msgs[1].buf = (char *) rx_buf;
-
-	if (i2c_transfer(client->adapter, msgs, 2) < 2)
-		return 0;
-
-	return rx_buf[0];
-}
-
-u32 cx25840_read4(struct i2c_client * client, u16 addr)
-{
-	struct i2c_msg msgs[2];
-	u8 tx_buf[2], rx_buf[4];
-
-	/* Write register address */
-	tx_buf[0] = addr >> 8;
-	tx_buf[1] = addr & 0xff;
-	msgs[0].addr = client->addr;
-	msgs[0].flags = 0;
-	msgs[0].len = 2;
-	msgs[0].buf = (char *) tx_buf;
-
-	/* Read data from registers */
-	msgs[1].addr = client->addr;
-	msgs[1].flags = I2C_M_RD;
-	msgs[1].len = 4;
-	msgs[1].buf = (char *) rx_buf;
-
-	if (i2c_transfer(client->adapter, msgs, 2) < 2)
-		return 0;
-
-	return (rx_buf[3] << 24) | (rx_buf[2] << 16) | (rx_buf[1] << 8) |
-		rx_buf[0];
-}
-
-int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned and_mask,
-		   u8 or_value)
-{
-	return cx25840_write(client, addr,
-			     (cx25840_read(client, addr) & and_mask) |
-			     or_value);
-}
-
-int cx25840_and_or4(struct i2c_client *client, u16 addr, u32 and_mask,
-		    u32 or_value)
-{
-	return cx25840_write4(client, addr,
-			      (cx25840_read4(client, addr) & and_mask) |
-			      or_value);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int set_input(struct i2c_client *client, enum cx25840_video_input vid_input,
-						enum cx25840_audio_input aud_input);
-
-/* ----------------------------------------------------------------------- */
-
-static int cx23885_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
-				      struct v4l2_subdev_io_pin_config *p)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	int i;
-	u32 pin_ctrl;
-	u8 gpio_oe, gpio_data, strength;
-
-	pin_ctrl = cx25840_read4(client, 0x120);
-	gpio_oe = cx25840_read(client, 0x160);
-	gpio_data = cx25840_read(client, 0x164);
-
-	for (i = 0; i < n; i++) {
-		strength = p[i].strength;
-		if (strength > CX25840_PIN_DRIVE_FAST)
-			strength = CX25840_PIN_DRIVE_FAST;
-
-		switch (p[i].pin) {
-		case CX23885_PIN_IRQ_N_GPIO16:
-			if (p[i].function != CX23885_PAD_IRQ_N) {
-				/* GPIO16 */
-				pin_ctrl &= ~(0x1 << 25);
-			} else {
-				/* IRQ_N */
-				if (p[i].flags &
-					(V4L2_SUBDEV_IO_PIN_DISABLE |
-					 V4L2_SUBDEV_IO_PIN_INPUT)) {
-					pin_ctrl &= ~(0x1 << 25);
-				} else {
-					pin_ctrl |= (0x1 << 25);
-				}
-				if (p[i].flags &
-					V4L2_SUBDEV_IO_PIN_ACTIVE_LOW) {
-					pin_ctrl &= ~(0x1 << 24);
-				} else {
-					pin_ctrl |= (0x1 << 24);
-				}
-			}
-			break;
-		case CX23885_PIN_IR_RX_GPIO19:
-			if (p[i].function != CX23885_PAD_GPIO19) {
-				/* IR_RX */
-				gpio_oe |= (0x1 << 0);
-				pin_ctrl &= ~(0x3 << 18);
-				pin_ctrl |= (strength << 18);
-			} else {
-				/* GPIO19 */
-				gpio_oe &= ~(0x1 << 0);
-				if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
-					gpio_data &= ~(0x1 << 0);
-					gpio_data |= ((p[i].value & 0x1) << 0);
-				}
-				pin_ctrl &= ~(0x3 << 12);
-				pin_ctrl |= (strength << 12);
-			}
-			break;
-		case CX23885_PIN_IR_TX_GPIO20:
-			if (p[i].function != CX23885_PAD_GPIO20) {
-				/* IR_TX */
-				gpio_oe |= (0x1 << 1);
-				if (p[i].flags & V4L2_SUBDEV_IO_PIN_DISABLE)
-					pin_ctrl &= ~(0x1 << 10);
-				else
-					pin_ctrl |= (0x1 << 10);
-				pin_ctrl &= ~(0x3 << 18);
-				pin_ctrl |= (strength << 18);
-			} else {
-				/* GPIO20 */
-				gpio_oe &= ~(0x1 << 1);
-				if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
-					gpio_data &= ~(0x1 << 1);
-					gpio_data |= ((p[i].value & 0x1) << 1);
-				}
-				pin_ctrl &= ~(0x3 << 12);
-				pin_ctrl |= (strength << 12);
-			}
-			break;
-		case CX23885_PIN_I2S_SDAT_GPIO21:
-			if (p[i].function != CX23885_PAD_GPIO21) {
-				/* I2S_SDAT */
-				/* TODO: Input or Output config */
-				gpio_oe |= (0x1 << 2);
-				pin_ctrl &= ~(0x3 << 22);
-				pin_ctrl |= (strength << 22);
-			} else {
-				/* GPIO21 */
-				gpio_oe &= ~(0x1 << 2);
-				if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
-					gpio_data &= ~(0x1 << 2);
-					gpio_data |= ((p[i].value & 0x1) << 2);
-				}
-				pin_ctrl &= ~(0x3 << 12);
-				pin_ctrl |= (strength << 12);
-			}
-			break;
-		case CX23885_PIN_I2S_WCLK_GPIO22:
-			if (p[i].function != CX23885_PAD_GPIO22) {
-				/* I2S_WCLK */
-				/* TODO: Input or Output config */
-				gpio_oe |= (0x1 << 3);
-				pin_ctrl &= ~(0x3 << 22);
-				pin_ctrl |= (strength << 22);
-			} else {
-				/* GPIO22 */
-				gpio_oe &= ~(0x1 << 3);
-				if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
-					gpio_data &= ~(0x1 << 3);
-					gpio_data |= ((p[i].value & 0x1) << 3);
-				}
-				pin_ctrl &= ~(0x3 << 12);
-				pin_ctrl |= (strength << 12);
-			}
-			break;
-		case CX23885_PIN_I2S_BCLK_GPIO23:
-			if (p[i].function != CX23885_PAD_GPIO23) {
-				/* I2S_BCLK */
-				/* TODO: Input or Output config */
-				gpio_oe |= (0x1 << 4);
-				pin_ctrl &= ~(0x3 << 22);
-				pin_ctrl |= (strength << 22);
-			} else {
-				/* GPIO23 */
-				gpio_oe &= ~(0x1 << 4);
-				if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
-					gpio_data &= ~(0x1 << 4);
-					gpio_data |= ((p[i].value & 0x1) << 4);
-				}
-				pin_ctrl &= ~(0x3 << 12);
-				pin_ctrl |= (strength << 12);
-			}
-			break;
-		}
-	}
-
-	cx25840_write(client, 0x164, gpio_data);
-	cx25840_write(client, 0x160, gpio_oe);
-	cx25840_write4(client, 0x120, pin_ctrl);
-	return 0;
-}
-
-static int common_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
-				      struct v4l2_subdev_io_pin_config *pincfg)
-{
-	struct cx25840_state *state = to_state(sd);
-
-	if (is_cx2388x(state))
-		return cx23885_s_io_pin_config(sd, n, pincfg);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static void init_dll1(struct i2c_client *client)
-{
-	/* This is the Hauppauge sequence used to
-	 * initialize the Delay Lock Loop 1 (ADC DLL). */
-	cx25840_write(client, 0x159, 0x23);
-	cx25840_write(client, 0x15a, 0x87);
-	cx25840_write(client, 0x15b, 0x06);
-	udelay(10);
-	cx25840_write(client, 0x159, 0xe1);
-	udelay(10);
-	cx25840_write(client, 0x15a, 0x86);
-	cx25840_write(client, 0x159, 0xe0);
-	cx25840_write(client, 0x159, 0xe1);
-	cx25840_write(client, 0x15b, 0x10);
-}
-
-static void init_dll2(struct i2c_client *client)
-{
-	/* This is the Hauppauge sequence used to
-	 * initialize the Delay Lock Loop 2 (ADC DLL). */
-	cx25840_write(client, 0x15d, 0xe3);
-	cx25840_write(client, 0x15e, 0x86);
-	cx25840_write(client, 0x15f, 0x06);
-	udelay(10);
-	cx25840_write(client, 0x15d, 0xe1);
-	cx25840_write(client, 0x15d, 0xe0);
-	cx25840_write(client, 0x15d, 0xe1);
-}
-
-static void cx25836_initialize(struct i2c_client *client)
-{
-	/* reset configuration is described on page 3-77 of the CX25836 datasheet */
-	/* 2. */
-	cx25840_and_or(client, 0x000, ~0x01, 0x01);
-	cx25840_and_or(client, 0x000, ~0x01, 0x00);
-	/* 3a. */
-	cx25840_and_or(client, 0x15a, ~0x70, 0x00);
-	/* 3b. */
-	cx25840_and_or(client, 0x15b, ~0x1e, 0x06);
-	/* 3c. */
-	cx25840_and_or(client, 0x159, ~0x02, 0x02);
-	/* 3d. */
-	udelay(10);
-	/* 3e. */
-	cx25840_and_or(client, 0x159, ~0x02, 0x00);
-	/* 3f. */
-	cx25840_and_or(client, 0x159, ~0xc0, 0xc0);
-	/* 3g. */
-	cx25840_and_or(client, 0x159, ~0x01, 0x00);
-	cx25840_and_or(client, 0x159, ~0x01, 0x01);
-	/* 3h. */
-	cx25840_and_or(client, 0x15b, ~0x1e, 0x10);
-}
-
-static void cx25840_work_handler(struct work_struct *work)
-{
-	struct cx25840_state *state = container_of(work, struct cx25840_state, fw_work);
-	cx25840_loadfw(state->c);
-	wake_up(&state->fw_wait);
-}
-
-static void cx25840_initialize(struct i2c_client *client)
-{
-	DEFINE_WAIT(wait);
-	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-	struct workqueue_struct *q;
-
-	/* datasheet startup in numbered steps, refer to page 3-77 */
-	/* 2. */
-	cx25840_and_or(client, 0x803, ~0x10, 0x00);
-	/* The default of this register should be 4, but I get 0 instead.
-	 * Set this register to 4 manually. */
-	cx25840_write(client, 0x000, 0x04);
-	/* 3. */
-	init_dll1(client);
-	init_dll2(client);
-	cx25840_write(client, 0x136, 0x0a);
-	/* 4. */
-	cx25840_write(client, 0x13c, 0x01);
-	cx25840_write(client, 0x13c, 0x00);
-	/* 5. */
-	/* Do the firmware load in a work handler to prevent.
-	   Otherwise the kernel is blocked waiting for the
-	   bit-banging i2c interface to finish uploading the
-	   firmware. */
-	INIT_WORK(&state->fw_work, cx25840_work_handler);
-	init_waitqueue_head(&state->fw_wait);
-	q = create_singlethread_workqueue("cx25840_fw");
-	prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE);
-	queue_work(q, &state->fw_work);
-	schedule();
-	finish_wait(&state->fw_wait, &wait);
-	destroy_workqueue(q);
-
-	/* 6. */
-	cx25840_write(client, 0x115, 0x8c);
-	cx25840_write(client, 0x116, 0x07);
-	cx25840_write(client, 0x118, 0x02);
-	/* 7. */
-	cx25840_write(client, 0x4a5, 0x80);
-	cx25840_write(client, 0x4a5, 0x00);
-	cx25840_write(client, 0x402, 0x00);
-	/* 8. */
-	cx25840_and_or(client, 0x401, ~0x18, 0);
-	cx25840_and_or(client, 0x4a2, ~0x10, 0x10);
-	/* steps 8c and 8d are done in change_input() */
-	/* 10. */
-	cx25840_write(client, 0x8d3, 0x1f);
-	cx25840_write(client, 0x8e3, 0x03);
-
-	cx25840_std_setup(client);
-
-	/* trial and error says these are needed to get audio */
-	cx25840_write(client, 0x914, 0xa0);
-	cx25840_write(client, 0x918, 0xa0);
-	cx25840_write(client, 0x919, 0x01);
-
-	/* stereo preferred */
-	cx25840_write(client, 0x809, 0x04);
-	/* AC97 shift */
-	cx25840_write(client, 0x8cf, 0x0f);
-
-	/* (re)set input */
-	set_input(client, state->vid_input, state->aud_input);
-
-	/* start microcontroller */
-	cx25840_and_or(client, 0x803, ~0x10, 0x10);
-}
-
-static void cx23885_initialize(struct i2c_client *client)
-{
-	DEFINE_WAIT(wait);
-	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-	struct workqueue_struct *q;
-
-	/*
-	 * Come out of digital power down
-	 * The CX23888, at least, needs this, otherwise registers aside from
-	 * 0x0-0x2 can't be read or written.
-	 */
-	cx25840_write(client, 0x000, 0);
-
-	/* Internal Reset */
-	cx25840_and_or(client, 0x102, ~0x01, 0x01);
-	cx25840_and_or(client, 0x102, ~0x01, 0x00);
-
-	/* Stop microcontroller */
-	cx25840_and_or(client, 0x803, ~0x10, 0x00);
-
-	/* DIF in reset? */
-	cx25840_write(client, 0x398, 0);
-
-	/*
-	 * Trust the default xtal, no division
-	 * '885: 28.636363... MHz
-	 * '887: 25.000000 MHz
-	 * '888: 50.000000 MHz
-	 */
-	cx25840_write(client, 0x2, 0x76);
-
-	/* Power up all the PLL's and DLL */
-	cx25840_write(client, 0x1, 0x40);
-
-	/* Sys PLL */
-	switch (state->id) {
-	case V4L2_IDENT_CX23888_AV:
-		/*
-		 * 50.0 MHz * (0xb + 0xe8ba26/0x2000000)/4 = 5 * 28.636363 MHz
-		 * 572.73 MHz before post divide
-		 */
-		/* HVR1850 or 50MHz xtal */
-		cx25840_write(client, 0x2, 0x71);
-		cx25840_write4(client, 0x11c, 0x01d1744c);
-		cx25840_write4(client, 0x118, 0x00000416);
-		cx25840_write4(client, 0x404, 0x0010253e);
-		cx25840_write4(client, 0x42c, 0x42600000);
-		cx25840_write4(client, 0x44c, 0x161f1000);
-		break;
-	case V4L2_IDENT_CX23887_AV:
-		/*
-		 * 25.0 MHz * (0x16 + 0x1d1744c/0x2000000)/4 = 5 * 28.636363 MHz
-		 * 572.73 MHz before post divide
-		 */
-		cx25840_write4(client, 0x11c, 0x01d1744c);
-		cx25840_write4(client, 0x118, 0x00000416);
-		break;
-	case V4L2_IDENT_CX23885_AV:
-	default:
-		/*
-		 * 28.636363 MHz * (0x14 + 0x0/0x2000000)/4 = 5 * 28.636363 MHz
-		 * 572.73 MHz before post divide
-		 */
-		cx25840_write4(client, 0x11c, 0x00000000);
-		cx25840_write4(client, 0x118, 0x00000414);
-		break;
-	}
-
-	/* Disable DIF bypass */
-	cx25840_write4(client, 0x33c, 0x00000001);
-
-	/* DIF Src phase inc */
-	cx25840_write4(client, 0x340, 0x0df7df83);
-
-	/*
-	 * Vid PLL
-	 * Setup for a BT.656 pixel clock of 13.5 Mpixels/second
-	 *
-	 * 28.636363 MHz * (0xf + 0x02be2c9/0x2000000)/4 = 8 * 13.5 MHz
-	 * 432.0 MHz before post divide
-	 */
-
-	/* HVR1850 */
-	switch (state->id) {
-	case V4L2_IDENT_CX23888_AV:
-		/* 888/HVR1250 specific */
-		cx25840_write4(client, 0x10c, 0x13333333);
-		cx25840_write4(client, 0x108, 0x00000515);
-		break;
-	default:
-		cx25840_write4(client, 0x10c, 0x002be2c9);
-		cx25840_write4(client, 0x108, 0x0000040f);
-	}
-
-	/* Luma */
-	cx25840_write4(client, 0x414, 0x00107d12);
-
-	/* Chroma */
-	cx25840_write4(client, 0x420, 0x3d008282);
-
-	/*
-	 * Aux PLL
-	 * Initial setup for audio sample clock:
-	 * 48 ksps, 16 bits/sample, x160 multiplier = 122.88 MHz
-	 * Initial I2S output/master clock(?):
-	 * 48 ksps, 16 bits/sample, x16 multiplier = 12.288 MHz
-	 */
-	switch (state->id) {
-	case V4L2_IDENT_CX23888_AV:
-		/*
-		 * 50.0 MHz * (0x7 + 0x0bedfa4/0x2000000)/3 = 122.88 MHz
-		 * 368.64 MHz before post divide
-		 * 122.88 MHz / 0xa = 12.288 MHz
-		 */
-		/* HVR1850  or 50MHz xtal */
-		cx25840_write4(client, 0x114, 0x017dbf48);
-		cx25840_write4(client, 0x110, 0x000a030e);
-		break;
-	case V4L2_IDENT_CX23887_AV:
-		/*
-		 * 25.0 MHz * (0xe + 0x17dbf48/0x2000000)/3 = 122.88 MHz
-		 * 368.64 MHz before post divide
-		 * 122.88 MHz / 0xa = 12.288 MHz
-		 */
-		cx25840_write4(client, 0x114, 0x017dbf48);
-		cx25840_write4(client, 0x110, 0x000a030e);
-		break;
-	case V4L2_IDENT_CX23885_AV:
-	default:
-		/*
-		 * 28.636363 MHz * (0xc + 0x1bf0c9e/0x2000000)/3 = 122.88 MHz
-		 * 368.64 MHz before post divide
-		 * 122.88 MHz / 0xa = 12.288 MHz
-		 */
-		cx25840_write4(client, 0x114, 0x01bf0c9e);
-		cx25840_write4(client, 0x110, 0x000a030c);
-		break;
-	};
-
-	/* ADC2 input select */
-	cx25840_write(client, 0x102, 0x10);
-
-	/* VIN1 & VIN5 */
-	cx25840_write(client, 0x103, 0x11);
-
-	/* Enable format auto detect */
-	cx25840_write(client, 0x400, 0);
-	/* Fast subchroma lock */
-	/* White crush, Chroma AGC & Chroma Killer enabled */
-	cx25840_write(client, 0x401, 0xe8);
-
-	/* Select AFE clock pad output source */
-	cx25840_write(client, 0x144, 0x05);
-
-	/* Drive GPIO2 direction and values for HVR1700
-	 * where an onboard mux selects the output of demodulator
-	 * vs the 417. Failure to set this results in no DTV.
-	 * It's safe to set this across all Hauppauge boards
-	 * currently, regardless of the board type.
-	 */
-	cx25840_write(client, 0x160, 0x1d);
-	cx25840_write(client, 0x164, 0x00);
-
-	/* Do the firmware load in a work handler to prevent.
-	   Otherwise the kernel is blocked waiting for the
-	   bit-banging i2c interface to finish uploading the
-	   firmware. */
-	INIT_WORK(&state->fw_work, cx25840_work_handler);
-	init_waitqueue_head(&state->fw_wait);
-	q = create_singlethread_workqueue("cx25840_fw");
-	prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE);
-	queue_work(q, &state->fw_work);
-	schedule();
-	finish_wait(&state->fw_wait, &wait);
-	destroy_workqueue(q);
-
-	/* Call the cx23888 specific std setup func, we no longer rely on
-	 * the generic cx24840 func.
-	 */
-	if (is_cx23888(state))
-		cx23888_std_setup(client);
-	else
-		cx25840_std_setup(client);
-
-	/* (re)set input */
-	set_input(client, state->vid_input, state->aud_input);
-
-	/* start microcontroller */
-	cx25840_and_or(client, 0x803, ~0x10, 0x10);
-
-	/* Disable and clear video interrupts - we don't use them */
-	cx25840_write4(client, CX25840_VID_INT_STAT_REG, 0xffffffff);
-
-	/* Disable and clear audio interrupts - we don't use them */
-	cx25840_write(client, CX25840_AUD_INT_CTRL_REG, 0xff);
-	cx25840_write(client, CX25840_AUD_INT_STAT_REG, 0xff);
-
-	/* CC raw enable */
-	/*  - VIP 1.1 control codes - 10bit, blue field enable.
-	 *  - enable raw data during vertical blanking.
-	 *  - enable ancillary Data insertion for 656 or VIP.
-	 */
-	cx25840_write4(client, 0x404, 0x0010253e);
-
-	/* CC on  - Undocumented Register */
-	cx25840_write(client, 0x42f, 0x66);
-
-	/* HVR-1250 / HVR1850 DIF related */
-	/* Power everything up */
-	cx25840_write4(client, 0x130, 0x0);
-
-	/* Undocumented */
-	cx25840_write4(client, 0x478, 0x6628021F);
-
-	/* AFE_CLK_OUT_CTRL - Select the clock output source as output */
-	cx25840_write4(client, 0x144, 0x5);
-
-	/* I2C_OUT_CTL - I2S output configuration as
-	 * Master, Sony, Left justified, left sample on WS=1
-	 */
-	cx25840_write4(client, 0x918, 0x1a0);
-
-	/* AFE_DIAG_CTRL1 */
-	cx25840_write4(client, 0x134, 0x000a1800);
-
-	/* AFE_DIAG_CTRL3 - Inverted Polarity for Audio and Video */
-	cx25840_write4(client, 0x13c, 0x00310000);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static void cx231xx_initialize(struct i2c_client *client)
-{
-	DEFINE_WAIT(wait);
-	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-	struct workqueue_struct *q;
-
-	/* Internal Reset */
-	cx25840_and_or(client, 0x102, ~0x01, 0x01);
-	cx25840_and_or(client, 0x102, ~0x01, 0x00);
-
-	/* Stop microcontroller */
-	cx25840_and_or(client, 0x803, ~0x10, 0x00);
-
-	/* DIF in reset? */
-	cx25840_write(client, 0x398, 0);
-
-	/* Trust the default xtal, no division */
-	/* This changes for the cx23888 products */
-	cx25840_write(client, 0x2, 0x76);
-
-	/* Bring down the regulator for AUX clk */
-	cx25840_write(client, 0x1, 0x40);
-
-	/* Disable DIF bypass */
-	cx25840_write4(client, 0x33c, 0x00000001);
-
-	/* DIF Src phase inc */
-	cx25840_write4(client, 0x340, 0x0df7df83);
-
-	/* Luma */
-	cx25840_write4(client, 0x414, 0x00107d12);
-
-	/* Chroma */
-	cx25840_write4(client, 0x420, 0x3d008282);
-
-	/* ADC2 input select */
-	cx25840_write(client, 0x102, 0x10);
-
-	/* VIN1 & VIN5 */
-	cx25840_write(client, 0x103, 0x11);
-
-	/* Enable format auto detect */
-	cx25840_write(client, 0x400, 0);
-	/* Fast subchroma lock */
-	/* White crush, Chroma AGC & Chroma Killer enabled */
-	cx25840_write(client, 0x401, 0xe8);
-
-	/* Do the firmware load in a work handler to prevent.
-	   Otherwise the kernel is blocked waiting for the
-	   bit-banging i2c interface to finish uploading the
-	   firmware. */
-	INIT_WORK(&state->fw_work, cx25840_work_handler);
-	init_waitqueue_head(&state->fw_wait);
-	q = create_singlethread_workqueue("cx25840_fw");
-	prepare_to_wait(&state->fw_wait, &wait, TASK_UNINTERRUPTIBLE);
-	queue_work(q, &state->fw_work);
-	schedule();
-	finish_wait(&state->fw_wait, &wait);
-	destroy_workqueue(q);
-
-	cx25840_std_setup(client);
-
-	/* (re)set input */
-	set_input(client, state->vid_input, state->aud_input);
-
-	/* start microcontroller */
-	cx25840_and_or(client, 0x803, ~0x10, 0x10);
-
-	/* CC raw enable */
-	cx25840_write(client, 0x404, 0x0b);
-
-	/* CC on */
-	cx25840_write(client, 0x42f, 0x66);
-	cx25840_write4(client, 0x474, 0x1e1e601a);
-}
-
-/* ----------------------------------------------------------------------- */
-
-void cx25840_std_setup(struct i2c_client *client)
-{
-	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-	v4l2_std_id std = state->std;
-	int hblank, hactive, burst, vblank, vactive, sc;
-	int vblank656, src_decimation;
-	int luma_lpf, uv_lpf, comb;
-	u32 pll_int, pll_frac, pll_post;
-
-	/* datasheet startup, step 8d */
-	if (std & ~V4L2_STD_NTSC)
-		cx25840_write(client, 0x49f, 0x11);
-	else
-		cx25840_write(client, 0x49f, 0x14);
-
-	if (std & V4L2_STD_625_50) {
-		hblank = 132;
-		hactive = 720;
-		burst = 93;
-		vblank = 36;
-		vactive = 580;
-		vblank656 = 40;
-		src_decimation = 0x21f;
-		luma_lpf = 2;
-
-		if (std & V4L2_STD_SECAM) {
-			uv_lpf = 0;
-			comb = 0;
-			sc = 0x0a425f;
-		} else if (std == V4L2_STD_PAL_Nc) {
-			uv_lpf = 1;
-			comb = 0x20;
-			sc = 556453;
-		} else {
-			uv_lpf = 1;
-			comb = 0x20;
-			sc = 688739;
-		}
-	} else {
-		hactive = 720;
-		hblank = 122;
-		vactive = 487;
-		luma_lpf = 1;
-		uv_lpf = 1;
-
-		src_decimation = 0x21f;
-		if (std == V4L2_STD_PAL_60) {
-			vblank = 26;
-			vblank656 = 26;
-			burst = 0x5b;
-			luma_lpf = 2;
-			comb = 0x20;
-			sc = 688739;
-		} else if (std == V4L2_STD_PAL_M) {
-			vblank = 20;
-			vblank656 = 24;
-			burst = 0x61;
-			comb = 0x20;
-			sc = 555452;
-		} else {
-			vblank = 26;
-			vblank656 = 26;
-			burst = 0x5b;
-			comb = 0x66;
-			sc = 556063;
-		}
-	}
-
-	/* DEBUG: Displays configured PLL frequency */
-	if (!is_cx231xx(state)) {
-		pll_int = cx25840_read(client, 0x108);
-		pll_frac = cx25840_read4(client, 0x10c) & 0x1ffffff;
-		pll_post = cx25840_read(client, 0x109);
-		v4l_dbg(1, cx25840_debug, client,
-			"PLL regs = int: %u, frac: %u, post: %u\n",
-			pll_int, pll_frac, pll_post);
-
-		if (pll_post) {
-			int fin, fsc;
-			int pll = (28636363L * ((((u64)pll_int) << 25L) + pll_frac)) >> 25L;
-
-			pll /= pll_post;
-			v4l_dbg(1, cx25840_debug, client, "PLL = %d.%06d MHz\n",
-					pll / 1000000, pll % 1000000);
-			v4l_dbg(1, cx25840_debug, client, "PLL/8 = %d.%06d MHz\n",
-					pll / 8000000, (pll / 8) % 1000000);
-
-			fin = ((u64)src_decimation * pll) >> 12;
-			v4l_dbg(1, cx25840_debug, client,
-					"ADC Sampling freq = %d.%06d MHz\n",
-					fin / 1000000, fin % 1000000);
-
-			fsc = (((u64)sc) * pll) >> 24L;
-			v4l_dbg(1, cx25840_debug, client,
-					"Chroma sub-carrier freq = %d.%06d MHz\n",
-					fsc / 1000000, fsc % 1000000);
-
-			v4l_dbg(1, cx25840_debug, client, "hblank %i, hactive %i, "
-				"vblank %i, vactive %i, vblank656 %i, src_dec %i, "
-				"burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x, "
-				"sc 0x%06x\n",
-				hblank, hactive, vblank, vactive, vblank656,
-				src_decimation, burst, luma_lpf, uv_lpf, comb, sc);
-		}
-	}
-
-	/* Sets horizontal blanking delay and active lines */
-	cx25840_write(client, 0x470, hblank);
-	cx25840_write(client, 0x471,
-			0xff & (((hblank >> 8) & 0x3) | (hactive << 4)));
-	cx25840_write(client, 0x472, hactive >> 4);
-
-	/* Sets burst gate delay */
-	cx25840_write(client, 0x473, burst);
-
-	/* Sets vertical blanking delay and active duration */
-	cx25840_write(client, 0x474, vblank);
-	cx25840_write(client, 0x475,
-			0xff & (((vblank >> 8) & 0x3) | (vactive << 4)));
-	cx25840_write(client, 0x476, vactive >> 4);
-	cx25840_write(client, 0x477, vblank656);
-
-	/* Sets src decimation rate */
-	cx25840_write(client, 0x478, 0xff & src_decimation);
-	cx25840_write(client, 0x479, 0xff & (src_decimation >> 8));
-
-	/* Sets Luma and UV Low pass filters */
-	cx25840_write(client, 0x47a, luma_lpf << 6 | ((uv_lpf << 4) & 0x30));
-
-	/* Enables comb filters */
-	cx25840_write(client, 0x47b, comb);
-
-	/* Sets SC Step*/
-	cx25840_write(client, 0x47c, sc);
-	cx25840_write(client, 0x47d, 0xff & sc >> 8);
-	cx25840_write(client, 0x47e, 0xff & sc >> 16);
-
-	/* Sets VBI parameters */
-	if (std & V4L2_STD_625_50) {
-		cx25840_write(client, 0x47f, 0x01);
-		state->vbi_line_offset = 5;
-	} else {
-		cx25840_write(client, 0x47f, 0x00);
-		state->vbi_line_offset = 8;
-	}
-}
-
-/* ----------------------------------------------------------------------- */
-
-static void input_change(struct i2c_client *client)
-{
-	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-	v4l2_std_id std = state->std;
-
-	/* Follow step 8c and 8d of section 3.16 in the cx25840 datasheet */
-	if (std & V4L2_STD_SECAM) {
-		cx25840_write(client, 0x402, 0);
-	}
-	else {
-		cx25840_write(client, 0x402, 0x04);
-		cx25840_write(client, 0x49f, (std & V4L2_STD_NTSC) ? 0x14 : 0x11);
-	}
-	cx25840_and_or(client, 0x401, ~0x60, 0);
-	cx25840_and_or(client, 0x401, ~0x60, 0x60);
-
-	/* Don't write into audio registers on cx2583x chips */
-	if (is_cx2583x(state))
-		return;
-
-	cx25840_and_or(client, 0x810, ~0x01, 1);
-
-	if (state->radio) {
-		cx25840_write(client, 0x808, 0xf9);
-		cx25840_write(client, 0x80b, 0x00);
-	}
-	else if (std & V4L2_STD_525_60) {
-		/* Certain Hauppauge PVR150 models have a hardware bug
-		   that causes audio to drop out. For these models the
-		   audio standard must be set explicitly.
-		   To be precise: it affects cards with tuner models
-		   85, 99 and 112 (model numbers from tveeprom). */
-		int hw_fix = state->pvr150_workaround;
-
-		if (std == V4L2_STD_NTSC_M_JP) {
-			/* Japan uses EIAJ audio standard */
-			cx25840_write(client, 0x808, hw_fix ? 0x2f : 0xf7);
-		} else if (std == V4L2_STD_NTSC_M_KR) {
-			/* South Korea uses A2 audio standard */
-			cx25840_write(client, 0x808, hw_fix ? 0x3f : 0xf8);
-		} else {
-			/* Others use the BTSC audio standard */
-			cx25840_write(client, 0x808, hw_fix ? 0x1f : 0xf6);
-		}
-		cx25840_write(client, 0x80b, 0x00);
-	} else if (std & V4L2_STD_PAL) {
-		/* Autodetect audio standard and audio system */
-		cx25840_write(client, 0x808, 0xff);
-		/* Since system PAL-L is pretty much non-existent and
-		   not used by any public broadcast network, force
-		   6.5 MHz carrier to be interpreted as System DK,
-		   this avoids DK audio detection instability */
-	       cx25840_write(client, 0x80b, 0x00);
-	} else if (std & V4L2_STD_SECAM) {
-		/* Autodetect audio standard and audio system */
-		cx25840_write(client, 0x808, 0xff);
-		/* If only one of SECAM-DK / SECAM-L is required, then force
-		  6.5MHz carrier, else autodetect it */
-		if ((std & V4L2_STD_SECAM_DK) &&
-		    !(std & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC))) {
-			/* 6.5 MHz carrier to be interpreted as System DK */
-			cx25840_write(client, 0x80b, 0x00);
-	       } else if (!(std & V4L2_STD_SECAM_DK) &&
-			  (std & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC))) {
-			/* 6.5 MHz carrier to be interpreted as System L */
-			cx25840_write(client, 0x80b, 0x08);
-	       } else {
-			/* 6.5 MHz carrier to be autodetected */
-			cx25840_write(client, 0x80b, 0x10);
-	       }
-	}
-
-	cx25840_and_or(client, 0x810, ~0x01, 0);
-}
-
-static int set_input(struct i2c_client *client, enum cx25840_video_input vid_input,
-						enum cx25840_audio_input aud_input)
-{
-	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-	u8 is_composite = (vid_input >= CX25840_COMPOSITE1 &&
-			   vid_input <= CX25840_COMPOSITE8);
-	u8 is_component = (vid_input & CX25840_COMPONENT_ON) ==
-			CX25840_COMPONENT_ON;
-	u8 is_dif = (vid_input & CX25840_DIF_ON) ==
-			CX25840_DIF_ON;
-	u8 is_svideo = (vid_input & CX25840_SVIDEO_ON) ==
-			CX25840_SVIDEO_ON;
-	int luma = vid_input & 0xf0;
-	int chroma = vid_input & 0xf00;
-	u8 reg;
-	u32 val;
-
-	v4l_dbg(1, cx25840_debug, client,
-		"decoder set video input %d, audio input %d\n",
-		vid_input, aud_input);
-
-	if (vid_input >= CX25840_VIN1_CH1) {
-		v4l_dbg(1, cx25840_debug, client, "vid_input 0x%x\n",
-			vid_input);
-		reg = vid_input & 0xff;
-		is_composite = !is_component &&
-			((vid_input & CX25840_SVIDEO_ON) != CX25840_SVIDEO_ON);
-
-		v4l_dbg(1, cx25840_debug, client, "mux cfg 0x%x comp=%d\n",
-			reg, is_composite);
-	} else if (is_composite) {
-		reg = 0xf0 + (vid_input - CX25840_COMPOSITE1);
-	} else {
-		if ((vid_input & ~0xff0) ||
-		    luma < CX25840_SVIDEO_LUMA1 || luma > CX25840_SVIDEO_LUMA8 ||
-		    chroma < CX25840_SVIDEO_CHROMA4 || chroma > CX25840_SVIDEO_CHROMA8) {
-			v4l_err(client, "0x%04x is not a valid video input!\n",
-				vid_input);
-			return -EINVAL;
-		}
-		reg = 0xf0 + ((luma - CX25840_SVIDEO_LUMA1) >> 4);
-		if (chroma >= CX25840_SVIDEO_CHROMA7) {
-			reg &= 0x3f;
-			reg |= (chroma - CX25840_SVIDEO_CHROMA7) >> 2;
-		} else {
-			reg &= 0xcf;
-			reg |= (chroma - CX25840_SVIDEO_CHROMA4) >> 4;
-		}
-	}
-
-	/* The caller has previously prepared the correct routing
-	 * configuration in reg (for the cx23885) so we have no
-	 * need to attempt to flip bits for earlier av decoders.
-	 */
-	if (!is_cx2388x(state) && !is_cx231xx(state)) {
-		switch (aud_input) {
-		case CX25840_AUDIO_SERIAL:
-			/* do nothing, use serial audio input */
-			break;
-		case CX25840_AUDIO4: reg &= ~0x30; break;
-		case CX25840_AUDIO5: reg &= ~0x30; reg |= 0x10; break;
-		case CX25840_AUDIO6: reg &= ~0x30; reg |= 0x20; break;
-		case CX25840_AUDIO7: reg &= ~0xc0; break;
-		case CX25840_AUDIO8: reg &= ~0xc0; reg |= 0x40; break;
-
-		default:
-			v4l_err(client, "0x%04x is not a valid audio input!\n",
-				aud_input);
-			return -EINVAL;
-		}
-	}
-
-	cx25840_write(client, 0x103, reg);
-
-	/* Set INPUT_MODE to Composite, S-Video or Component */
-	if (is_component)
-		cx25840_and_or(client, 0x401, ~0x6, 0x6);
-	else
-		cx25840_and_or(client, 0x401, ~0x6, is_composite ? 0 : 0x02);
-
-	if (is_cx2388x(state)) {
-
-		/* Enable or disable the DIF for tuner use */
-		if (is_dif) {
-			cx25840_and_or(client, 0x102, ~0x80, 0x80);
-
-			/* Set of defaults for NTSC and PAL */
-			cx25840_write4(client, 0x31c, 0xc2262600);
-			cx25840_write4(client, 0x320, 0xc2262600);
-
-			/* 18271 IF - Nobody else yet uses a different
-			 * tuner with the DIF, so these are reasonable
-			 * assumptions (HVR1250 and HVR1850 specific).
-			 */
-			cx25840_write4(client, 0x318, 0xda262600);
-			cx25840_write4(client, 0x33c, 0x2a24c800);
-			cx25840_write4(client, 0x104, 0x0704dd00);
-		} else {
-			cx25840_write4(client, 0x300, 0x015c28f5);
-
-			cx25840_and_or(client, 0x102, ~0x80, 0);
-			cx25840_write4(client, 0x340, 0xdf7df83);
-			cx25840_write4(client, 0x104, 0x0704dd80);
-			cx25840_write4(client, 0x314, 0x22400600);
-			cx25840_write4(client, 0x318, 0x40002600);
-			cx25840_write4(client, 0x324, 0x40002600);
-			cx25840_write4(client, 0x32c, 0x0250e620);
-			cx25840_write4(client, 0x39c, 0x01FF0B00);
-
-			cx25840_write4(client, 0x410, 0xffff0dbf);
-			cx25840_write4(client, 0x414, 0x00137d03);
-
-			/* on the 887, 0x418 is HSCALE_CTRL, on the 888 it is 
-			   CHROMA_CTRL */
-			if (is_cx23888(state))
-				cx25840_write4(client, 0x418, 0x01008080);
-			else
-				cx25840_write4(client, 0x418, 0x01000000);
-
-			cx25840_write4(client, 0x41c, 0x00000000);
-
-			/* on the 887, 0x420 is CHROMA_CTRL, on the 888 it is 
-			   CRUSH_CTRL */
-			if (is_cx23888(state))
-				cx25840_write4(client, 0x420, 0x001c3e0f);
-			else
-				cx25840_write4(client, 0x420, 0x001c8282);
-
-			cx25840_write4(client, 0x42c, 0x42600000);
-			cx25840_write4(client, 0x430, 0x0000039b);
-			cx25840_write4(client, 0x438, 0x00000000);
-
-			cx25840_write4(client, 0x440, 0xF8E3E824);
-			cx25840_write4(client, 0x444, 0x401040dc);
-			cx25840_write4(client, 0x448, 0xcd3f02a0);
-			cx25840_write4(client, 0x44c, 0x161f1000);
-			cx25840_write4(client, 0x450, 0x00000802);
-
-			cx25840_write4(client, 0x91c, 0x01000000);
-			cx25840_write4(client, 0x8e0, 0x03063870);
-			cx25840_write4(client, 0x8d4, 0x7FFF0024);
-			cx25840_write4(client, 0x8d0, 0x00063073);
-
-			cx25840_write4(client, 0x8c8, 0x00010000);
-			cx25840_write4(client, 0x8cc, 0x00080023);
-
-			/* DIF BYPASS */
-			cx25840_write4(client, 0x33c, 0x2a04c800);
-		}
-
-		/* Reset the DIF */
-		cx25840_write4(client, 0x398, 0);
-	}
-
-	if (!is_cx2388x(state) && !is_cx231xx(state)) {
-		/* Set CH_SEL_ADC2 to 1 if input comes from CH3 */
-		cx25840_and_or(client, 0x102, ~0x2, (reg & 0x80) == 0 ? 2 : 0);
-		/* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2&CH3 */
-		if ((reg & 0xc0) != 0xc0 && (reg & 0x30) != 0x30)
-			cx25840_and_or(client, 0x102, ~0x4, 4);
-		else
-			cx25840_and_or(client, 0x102, ~0x4, 0);
-	} else {
-		/* Set DUAL_MODE_ADC2 to 1 if component*/
-		cx25840_and_or(client, 0x102, ~0x4, is_component ? 0x4 : 0x0);
-		if (is_composite) {
-			/* ADC2 input select channel 2 */
-			cx25840_and_or(client, 0x102, ~0x2, 0);
-		} else if (!is_component) {
-			/* S-Video */
-			if (chroma >= CX25840_SVIDEO_CHROMA7) {
-				/* ADC2 input select channel 3 */
-				cx25840_and_or(client, 0x102, ~0x2, 2);
-			} else {
-				/* ADC2 input select channel 2 */
-				cx25840_and_or(client, 0x102, ~0x2, 0);
-			}
-		}
-
-		/* cx23885 / SVIDEO */
-		if (is_cx2388x(state) && is_svideo) {
-#define AFE_CTRL  (0x104)
-#define MODE_CTRL (0x400)
-			cx25840_and_or(client, 0x102, ~0x2, 0x2);
-
-			val = cx25840_read4(client, MODE_CTRL);
-			val &= 0xFFFFF9FF;
-
-			/* YC */
-			val |= 0x00000200;
-			val &= ~0x2000;
-			cx25840_write4(client, MODE_CTRL, val);
-
-			val = cx25840_read4(client, AFE_CTRL);
-
-			/* Chroma in select */
-			val |= 0x00001000;
-			val &= 0xfffffe7f;
-			/* Clear VGA_SEL_CH2 and VGA_SEL_CH3 (bits 7 and 8).
-			 * This sets them to use video rather than audio.
-			 * Only one of the two will be in use.
-			 */
-			cx25840_write4(client, AFE_CTRL, val);
-		} else
-			cx25840_and_or(client, 0x102, ~0x2, 0);
-	}
-
-	state->vid_input = vid_input;
-	state->aud_input = aud_input;
-	cx25840_audio_set_path(client);
-	input_change(client);
-
-	if (is_cx2388x(state)) {
-		/* Audio channel 1 src : Parallel 1 */
-		cx25840_write(client, 0x124, 0x03);
-
-		/* Select AFE clock pad output source */
-		cx25840_write(client, 0x144, 0x05);
-
-		/* I2S_IN_CTL: I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1 */
-		cx25840_write(client, 0x914, 0xa0);
-
-		/* I2S_OUT_CTL:
-		 * I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1
-		 * I2S_OUT_MASTER_MODE = Master
-		 */
-		cx25840_write(client, 0x918, 0xa0);
-		cx25840_write(client, 0x919, 0x01);
-	} else if (is_cx231xx(state)) {
-		/* Audio channel 1 src : Parallel 1 */
-		cx25840_write(client, 0x124, 0x03);
-
-		/* I2S_IN_CTL: I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1 */
-		cx25840_write(client, 0x914, 0xa0);
-
-		/* I2S_OUT_CTL:
-		 * I2S_IN_SONY_MODE, LEFT SAMPLE on WS=1
-		 * I2S_OUT_MASTER_MODE = Master
-		 */
-		cx25840_write(client, 0x918, 0xa0);
-		cx25840_write(client, 0x919, 0x01);
-	}
-
-	if (is_cx2388x(state) && ((aud_input == CX25840_AUDIO7) ||
-		(aud_input == CX25840_AUDIO6))) {
-		/* Configure audio from LR1 or LR2 input */
-		cx25840_write4(client, 0x910, 0);
-		cx25840_write4(client, 0x8d0, 0x63073);
-	} else
-	if (is_cx2388x(state) && (aud_input == CX25840_AUDIO8)) {
-		/* Configure audio from tuner/sif input */
-		cx25840_write4(client, 0x910, 0x12b000c9);
-		cx25840_write4(client, 0x8d0, 0x1f063870);
-	}
-
-	if (is_cx23888(state)) {
-		/* HVR1850 */
-		/* AUD_IO_CTRL - I2S Input, Parallel1*/
-		/*  - Channel 1 src - Parallel1 (Merlin out) */
-		/*  - Channel 2 src - Parallel2 (Merlin out) */
-		/*  - Channel 3 src - Parallel3 (Merlin AC97 out) */
-		/*  - I2S source and dir - Merlin, output */
-		cx25840_write4(client, 0x124, 0x100);
-
-		if (!is_dif) {
-			/* Stop microcontroller if we don't need it
-			 * to avoid audio popping on svideo/composite use.
-			 */
-			cx25840_and_or(client, 0x803, ~0x10, 0x00);
-		}
-	}
-
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int set_v4lstd(struct i2c_client *client)
-{
-	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-	u8 fmt = 0; 	/* zero is autodetect */
-	u8 pal_m = 0;
-
-	/* First tests should be against specific std */
-	if (state->std == V4L2_STD_NTSC_M_JP) {
-		fmt = 0x2;
-	} else if (state->std == V4L2_STD_NTSC_443) {
-		fmt = 0x3;
-	} else if (state->std == V4L2_STD_PAL_M) {
-		pal_m = 1;
-		fmt = 0x5;
-	} else if (state->std == V4L2_STD_PAL_N) {
-		fmt = 0x6;
-	} else if (state->std == V4L2_STD_PAL_Nc) {
-		fmt = 0x7;
-	} else if (state->std == V4L2_STD_PAL_60) {
-		fmt = 0x8;
-	} else {
-		/* Then, test against generic ones */
-		if (state->std & V4L2_STD_NTSC)
-			fmt = 0x1;
-		else if (state->std & V4L2_STD_PAL)
-			fmt = 0x4;
-		else if (state->std & V4L2_STD_SECAM)
-			fmt = 0xc;
-	}
-
-	v4l_dbg(1, cx25840_debug, client, "changing video std to fmt %i\n",fmt);
-
-	/* Follow step 9 of section 3.16 in the cx25840 datasheet.
-	   Without this PAL may display a vertical ghosting effect.
-	   This happens for example with the Yuan MPC622. */
-	if (fmt >= 4 && fmt < 8) {
-		/* Set format to NTSC-M */
-		cx25840_and_or(client, 0x400, ~0xf, 1);
-		/* Turn off LCOMB */
-		cx25840_and_or(client, 0x47b, ~6, 0);
-	}
-	cx25840_and_or(client, 0x400, ~0xf, fmt);
-	cx25840_and_or(client, 0x403, ~0x3, pal_m);
-	if (is_cx23888(state))
-		cx23888_std_setup(client);
-	else
-		cx25840_std_setup(client);
-	if (!is_cx2583x(state))
-		input_change(client);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int cx25840_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-	struct cx25840_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		cx25840_write(client, 0x414, ctrl->val - 128);
-		break;
-
-	case V4L2_CID_CONTRAST:
-		cx25840_write(client, 0x415, ctrl->val << 1);
-		break;
-
-	case V4L2_CID_SATURATION:
-		if (is_cx23888(state)) {
-			cx25840_write(client, 0x418, ctrl->val << 1);
-			cx25840_write(client, 0x419, ctrl->val << 1);
-		} else {
-			cx25840_write(client, 0x420, ctrl->val << 1);
-			cx25840_write(client, 0x421, ctrl->val << 1);
-		}
-		break;
-
-	case V4L2_CID_HUE:
-		if (is_cx23888(state))
-			cx25840_write(client, 0x41a, ctrl->val);
-		else
-			cx25840_write(client, 0x422, ctrl->val);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int cx25840_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
-{
-	struct cx25840_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	int HSC, VSC, Vsrc, Hsrc, filter, Vlines;
-	int is_50Hz = !(state->std & V4L2_STD_525_60);
-
-	if (fmt->code != V4L2_MBUS_FMT_FIXED)
-		return -EINVAL;
-
-	fmt->field = V4L2_FIELD_INTERLACED;
-	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
-
-	if (is_cx23888(state)) {
-		Vsrc = (cx25840_read(client, 0x42a) & 0x3f) << 4;
-		Vsrc |= (cx25840_read(client, 0x429) & 0xf0) >> 4;
-	} else {
-		Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4;
-		Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4;
-	}
-
-	if (is_cx23888(state)) {
-		Hsrc = (cx25840_read(client, 0x426) & 0x3f) << 4;
-		Hsrc |= (cx25840_read(client, 0x425) & 0xf0) >> 4;
-	} else {
-		Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4;
-		Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4;
-	}
-
-	Vlines = fmt->height + (is_50Hz ? 4 : 7);
-
-	if ((fmt->width * 16 < Hsrc) || (Hsrc < fmt->width) ||
-			(Vlines * 8 < Vsrc) || (Vsrc < Vlines)) {
-		v4l_err(client, "%dx%d is not a valid size!\n",
-				fmt->width, fmt->height);
-		return -ERANGE;
-	}
-
-	HSC = (Hsrc * (1 << 20)) / fmt->width - (1 << 20);
-	VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9));
-	VSC &= 0x1fff;
-
-	if (fmt->width >= 385)
-		filter = 0;
-	else if (fmt->width > 192)
-		filter = 1;
-	else if (fmt->width > 96)
-		filter = 2;
-	else
-		filter = 3;
-
-	v4l_dbg(1, cx25840_debug, client, "decoder set size %dx%d -> scale  %ux%u\n",
-			fmt->width, fmt->height, HSC, VSC);
-
-	/* HSCALE=HSC */
-	cx25840_write(client, 0x418, HSC & 0xff);
-	cx25840_write(client, 0x419, (HSC >> 8) & 0xff);
-	cx25840_write(client, 0x41a, HSC >> 16);
-	/* VSCALE=VSC */
-	cx25840_write(client, 0x41c, VSC & 0xff);
-	cx25840_write(client, 0x41d, VSC >> 8);
-	/* VS_INTRLACE=1 VFILT=filter */
-	cx25840_write(client, 0x41e, 0x8 | filter);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static void log_video_status(struct i2c_client *client)
-{
-	static const char *const fmt_strs[] = {
-		"0x0",
-		"NTSC-M", "NTSC-J", "NTSC-4.43",
-		"PAL-BDGHI", "PAL-M", "PAL-N", "PAL-Nc", "PAL-60",
-		"0x9", "0xA", "0xB",
-		"SECAM",
-		"0xD", "0xE", "0xF"
-	};
-
-	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-	u8 vidfmt_sel = cx25840_read(client, 0x400) & 0xf;
-	u8 gen_stat1 = cx25840_read(client, 0x40d);
-	u8 gen_stat2 = cx25840_read(client, 0x40e);
-	int vid_input = state->vid_input;
-
-	v4l_info(client, "Video signal:              %spresent\n",
-		    (gen_stat2 & 0x20) ? "" : "not ");
-	v4l_info(client, "Detected format:           %s\n",
-		    fmt_strs[gen_stat1 & 0xf]);
-
-	v4l_info(client, "Specified standard:        %s\n",
-		    vidfmt_sel ? fmt_strs[vidfmt_sel] : "automatic detection");
-
-	if (vid_input >= CX25840_COMPOSITE1 &&
-	    vid_input <= CX25840_COMPOSITE8) {
-		v4l_info(client, "Specified video input:     Composite %d\n",
-			vid_input - CX25840_COMPOSITE1 + 1);
-	} else {
-		v4l_info(client, "Specified video input:     S-Video (Luma In%d, Chroma In%d)\n",
-			(vid_input & 0xf0) >> 4, (vid_input & 0xf00) >> 8);
-	}
-
-	v4l_info(client, "Specified audioclock freq: %d Hz\n", state->audclk_freq);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static void log_audio_status(struct i2c_client *client)
-{
-	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-	u8 download_ctl = cx25840_read(client, 0x803);
-	u8 mod_det_stat0 = cx25840_read(client, 0x804);
-	u8 mod_det_stat1 = cx25840_read(client, 0x805);
-	u8 audio_config = cx25840_read(client, 0x808);
-	u8 pref_mode = cx25840_read(client, 0x809);
-	u8 afc0 = cx25840_read(client, 0x80b);
-	u8 mute_ctl = cx25840_read(client, 0x8d3);
-	int aud_input = state->aud_input;
-	char *p;
-
-	switch (mod_det_stat0) {
-	case 0x00: p = "mono"; break;
-	case 0x01: p = "stereo"; break;
-	case 0x02: p = "dual"; break;
-	case 0x04: p = "tri"; break;
-	case 0x10: p = "mono with SAP"; break;
-	case 0x11: p = "stereo with SAP"; break;
-	case 0x12: p = "dual with SAP"; break;
-	case 0x14: p = "tri with SAP"; break;
-	case 0xfe: p = "forced mode"; break;
-	default: p = "not defined";
-	}
-	v4l_info(client, "Detected audio mode:       %s\n", p);
-
-	switch (mod_det_stat1) {
-	case 0x00: p = "not defined"; break;
-	case 0x01: p = "EIAJ"; break;
-	case 0x02: p = "A2-M"; break;
-	case 0x03: p = "A2-BG"; break;
-	case 0x04: p = "A2-DK1"; break;
-	case 0x05: p = "A2-DK2"; break;
-	case 0x06: p = "A2-DK3"; break;
-	case 0x07: p = "A1 (6.0 MHz FM Mono)"; break;
-	case 0x08: p = "AM-L"; break;
-	case 0x09: p = "NICAM-BG"; break;
-	case 0x0a: p = "NICAM-DK"; break;
-	case 0x0b: p = "NICAM-I"; break;
-	case 0x0c: p = "NICAM-L"; break;
-	case 0x0d: p = "BTSC/EIAJ/A2-M Mono (4.5 MHz FMMono)"; break;
-	case 0x0e: p = "IF FM Radio"; break;
-	case 0x0f: p = "BTSC"; break;
-	case 0x10: p = "high-deviation FM"; break;
-	case 0x11: p = "very high-deviation FM"; break;
-	case 0xfd: p = "unknown audio standard"; break;
-	case 0xfe: p = "forced audio standard"; break;
-	case 0xff: p = "no detected audio standard"; break;
-	default: p = "not defined";
-	}
-	v4l_info(client, "Detected audio standard:   %s\n", p);
-	v4l_info(client, "Audio microcontroller:     %s\n",
-		    (download_ctl & 0x10) ?
-				((mute_ctl & 0x2) ? "detecting" : "running") : "stopped");
-
-	switch (audio_config >> 4) {
-	case 0x00: p = "undefined"; break;
-	case 0x01: p = "BTSC"; break;
-	case 0x02: p = "EIAJ"; break;
-	case 0x03: p = "A2-M"; break;
-	case 0x04: p = "A2-BG"; break;
-	case 0x05: p = "A2-DK1"; break;
-	case 0x06: p = "A2-DK2"; break;
-	case 0x07: p = "A2-DK3"; break;
-	case 0x08: p = "A1 (6.0 MHz FM Mono)"; break;
-	case 0x09: p = "AM-L"; break;
-	case 0x0a: p = "NICAM-BG"; break;
-	case 0x0b: p = "NICAM-DK"; break;
-	case 0x0c: p = "NICAM-I"; break;
-	case 0x0d: p = "NICAM-L"; break;
-	case 0x0e: p = "FM radio"; break;
-	case 0x0f: p = "automatic detection"; break;
-	default: p = "undefined";
-	}
-	v4l_info(client, "Configured audio standard: %s\n", p);
-
-	if ((audio_config >> 4) < 0xF) {
-		switch (audio_config & 0xF) {
-		case 0x00: p = "MONO1 (LANGUAGE A/Mono L+R channel for BTSC, EIAJ, A2)"; break;
-		case 0x01: p = "MONO2 (LANGUAGE B)"; break;
-		case 0x02: p = "MONO3 (STEREO forced MONO)"; break;
-		case 0x03: p = "MONO4 (NICAM ANALOG-Language C/Analog Fallback)"; break;
-		case 0x04: p = "STEREO"; break;
-		case 0x05: p = "DUAL1 (AB)"; break;
-		case 0x06: p = "DUAL2 (AC) (FM)"; break;
-		case 0x07: p = "DUAL3 (BC) (FM)"; break;
-		case 0x08: p = "DUAL4 (AC) (AM)"; break;
-		case 0x09: p = "DUAL5 (BC) (AM)"; break;
-		case 0x0a: p = "SAP"; break;
-		default: p = "undefined";
-		}
-		v4l_info(client, "Configured audio mode:     %s\n", p);
-	} else {
-		switch (audio_config & 0xF) {
-		case 0x00: p = "BG"; break;
-		case 0x01: p = "DK1"; break;
-		case 0x02: p = "DK2"; break;
-		case 0x03: p = "DK3"; break;
-		case 0x04: p = "I"; break;
-		case 0x05: p = "L"; break;
-		case 0x06: p = "BTSC"; break;
-		case 0x07: p = "EIAJ"; break;
-		case 0x08: p = "A2-M"; break;
-		case 0x09: p = "FM Radio"; break;
-		case 0x0f: p = "automatic standard and mode detection"; break;
-		default: p = "undefined";
-		}
-		v4l_info(client, "Configured audio system:   %s\n", p);
-	}
-
-	if (aud_input) {
-		v4l_info(client, "Specified audio input:     Tuner (In%d)\n", aud_input);
-	} else {
-		v4l_info(client, "Specified audio input:     External\n");
-	}
-
-	switch (pref_mode & 0xf) {
-	case 0: p = "mono/language A"; break;
-	case 1: p = "language B"; break;
-	case 2: p = "language C"; break;
-	case 3: p = "analog fallback"; break;
-	case 4: p = "stereo"; break;
-	case 5: p = "language AC"; break;
-	case 6: p = "language BC"; break;
-	case 7: p = "language AB"; break;
-	default: p = "undefined";
-	}
-	v4l_info(client, "Preferred audio mode:      %s\n", p);
-
-	if ((audio_config & 0xf) == 0xf) {
-		switch ((afc0 >> 3) & 0x3) {
-		case 0: p = "system DK"; break;
-		case 1: p = "system L"; break;
-		case 2: p = "autodetect"; break;
-		default: p = "undefined";
-		}
-		v4l_info(client, "Selected 65 MHz format:    %s\n", p);
-
-		switch (afc0 & 0x7) {
-		case 0: p = "chroma"; break;
-		case 1: p = "BTSC"; break;
-		case 2: p = "EIAJ"; break;
-		case 3: p = "A2-M"; break;
-		case 4: p = "autodetect"; break;
-		default: p = "undefined";
-		}
-		v4l_info(client, "Selected 45 MHz format:    %s\n", p);
-	}
-}
-
-/* ----------------------------------------------------------------------- */
-
-/* This load_fw operation must be called to load the driver's firmware.
-   Without this the audio standard detection will fail and you will
-   only get mono.
-
-   Since loading the firmware is often problematic when the driver is
-   compiled into the kernel I recommend postponing calling this function
-   until the first open of the video device. Another reason for
-   postponing it is that loading this firmware takes a long time (seconds)
-   due to the slow i2c bus speed. So it will speed up the boot process if
-   you can avoid loading the fw as long as the video device isn't used.  */
-static int cx25840_load_fw(struct v4l2_subdev *sd)
-{
-	struct cx25840_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!state->is_initialized) {
-		/* initialize and load firmware */
-		state->is_initialized = 1;
-		if (is_cx2583x(state))
-			cx25836_initialize(client);
-		else if (is_cx2388x(state))
-			cx23885_initialize(client);
-		else if (is_cx231xx(state))
-			cx231xx_initialize(client);
-		else
-			cx25840_initialize(client);
-	}
-	return 0;
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int cx25840_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	reg->size = 1;
-	reg->val = cx25840_read(client, reg->reg & 0x0fff);
-	return 0;
-}
-
-static int cx25840_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	cx25840_write(client, reg->reg & 0x0fff, reg->val & 0xff);
-	return 0;
-}
-#endif
-
-static int cx25840_s_audio_stream(struct v4l2_subdev *sd, int enable)
-{
-	struct cx25840_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u8 v;
-
-	if (is_cx2583x(state) || is_cx2388x(state) || is_cx231xx(state))
-		return 0;
-
-	v4l_dbg(1, cx25840_debug, client, "%s audio output\n",
-			enable ? "enable" : "disable");
-
-	if (enable) {
-		v = cx25840_read(client, 0x115) | 0x80;
-		cx25840_write(client, 0x115, v);
-		v = cx25840_read(client, 0x116) | 0x03;
-		cx25840_write(client, 0x116, v);
-	} else {
-		v = cx25840_read(client, 0x115) & ~(0x80);
-		cx25840_write(client, 0x115, v);
-		v = cx25840_read(client, 0x116) & ~(0x03);
-		cx25840_write(client, 0x116, v);
-	}
-	return 0;
-}
-
-static int cx25840_s_stream(struct v4l2_subdev *sd, int enable)
-{
-	struct cx25840_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u8 v;
-
-	v4l_dbg(1, cx25840_debug, client, "%s video output\n",
-			enable ? "enable" : "disable");
-	if (enable) {
-		if (is_cx2388x(state) || is_cx231xx(state)) {
-			v = cx25840_read(client, 0x421) | 0x0b;
-			cx25840_write(client, 0x421, v);
-		} else {
-			v = cx25840_read(client, 0x115) | 0x0c;
-			cx25840_write(client, 0x115, v);
-			v = cx25840_read(client, 0x116) | 0x04;
-			cx25840_write(client, 0x116, v);
-		}
-	} else {
-		if (is_cx2388x(state) || is_cx231xx(state)) {
-			v = cx25840_read(client, 0x421) & ~(0x0b);
-			cx25840_write(client, 0x421, v);
-		} else {
-			v = cx25840_read(client, 0x115) & ~(0x0c);
-			cx25840_write(client, 0x115, v);
-			v = cx25840_read(client, 0x116) & ~(0x04);
-			cx25840_write(client, 0x116, v);
-		}
-	}
-	return 0;
-}
-
-/* Query the current detected video format */
-static int cx25840_g_std(struct v4l2_subdev *sd, v4l2_std_id *std)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	v4l2_std_id stds[] = {
-		/* 0000 */ V4L2_STD_UNKNOWN,
-
-		/* 0001 */ V4L2_STD_NTSC_M,
-		/* 0010 */ V4L2_STD_NTSC_M_JP,
-		/* 0011 */ V4L2_STD_NTSC_443,
-		/* 0100 */ V4L2_STD_PAL,
-		/* 0101 */ V4L2_STD_PAL_M,
-		/* 0110 */ V4L2_STD_PAL_N,
-		/* 0111 */ V4L2_STD_PAL_Nc,
-		/* 1000 */ V4L2_STD_PAL_60,
-
-		/* 1001 */ V4L2_STD_UNKNOWN,
-		/* 1010 */ V4L2_STD_UNKNOWN,
-		/* 1001 */ V4L2_STD_UNKNOWN,
-		/* 1010 */ V4L2_STD_UNKNOWN,
-		/* 1011 */ V4L2_STD_UNKNOWN,
-		/* 1110 */ V4L2_STD_UNKNOWN,
-		/* 1111 */ V4L2_STD_UNKNOWN
-	};
-
-	u32 fmt = (cx25840_read4(client, 0x40c) >> 8) & 0xf;
-	*std = stds[ fmt ];
-
-	v4l_dbg(1, cx25840_debug, client, "g_std fmt = %x, v4l2_std_id = 0x%x\n",
-		fmt, (unsigned int)stds[ fmt ]);
-
-	return 0;
-}
-
-static int cx25840_g_input_status(struct v4l2_subdev *sd, u32 *status)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	/* A limited function that checks for signal status and returns
-	 * the state.
-	 */
-
-	/* Check for status of Horizontal lock (SRC lock isn't reliable) */
-	if ((cx25840_read4(client, 0x40c) & 0x00010000) == 0)
-		*status |= V4L2_IN_ST_NO_SIGNAL;
-
-	return 0;
-}
-
-static int cx25840_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct cx25840_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (state->radio == 0 && state->std == std)
-		return 0;
-	state->radio = 0;
-	state->std = std;
-	return set_v4lstd(client);
-}
-
-static int cx25840_s_radio(struct v4l2_subdev *sd)
-{
-	struct cx25840_state *state = to_state(sd);
-
-	state->radio = 1;
-	return 0;
-}
-
-static int cx25840_s_video_routing(struct v4l2_subdev *sd,
-				   u32 input, u32 output, u32 config)
-{
-	struct cx25840_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (is_cx23888(state))
-		cx23888_std_setup(client);
-
-	return set_input(client, input, state->aud_input);
-}
-
-static int cx25840_s_audio_routing(struct v4l2_subdev *sd,
-				   u32 input, u32 output, u32 config)
-{
-	struct cx25840_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (is_cx23888(state))
-		cx23888_std_setup(client);
-	return set_input(client, state->vid_input, input);
-}
-
-static int cx25840_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *freq)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	input_change(client);
-	return 0;
-}
-
-static int cx25840_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
-{
-	struct cx25840_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u8 vpres = cx25840_read(client, 0x40e) & 0x20;
-	u8 mode;
-	int val = 0;
-
-	if (state->radio)
-		return 0;
-
-	vt->signal = vpres ? 0xffff : 0x0;
-	if (is_cx2583x(state))
-		return 0;
-
-	vt->capability |=
-		V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 |
-		V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP;
-
-	mode = cx25840_read(client, 0x804);
-
-	/* get rxsubchans and audmode */
-	if ((mode & 0xf) == 1)
-		val |= V4L2_TUNER_SUB_STEREO;
-	else
-		val |= V4L2_TUNER_SUB_MONO;
-
-	if (mode == 2 || mode == 4)
-		val = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
-
-	if (mode & 0x10)
-		val |= V4L2_TUNER_SUB_SAP;
-
-	vt->rxsubchans = val;
-	vt->audmode = state->audmode;
-	return 0;
-}
-
-static int cx25840_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
-{
-	struct cx25840_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (state->radio || is_cx2583x(state))
-		return 0;
-
-	switch (vt->audmode) {
-		case V4L2_TUNER_MODE_MONO:
-			/* mono      -> mono
-			   stereo    -> mono
-			   bilingual -> lang1 */
-			cx25840_and_or(client, 0x809, ~0xf, 0x00);
-			break;
-		case V4L2_TUNER_MODE_STEREO:
-		case V4L2_TUNER_MODE_LANG1:
-			/* mono      -> mono
-			   stereo    -> stereo
-			   bilingual -> lang1 */
-			cx25840_and_or(client, 0x809, ~0xf, 0x04);
-			break;
-		case V4L2_TUNER_MODE_LANG1_LANG2:
-			/* mono      -> mono
-			   stereo    -> stereo
-			   bilingual -> lang1/lang2 */
-			cx25840_and_or(client, 0x809, ~0xf, 0x07);
-			break;
-		case V4L2_TUNER_MODE_LANG2:
-			/* mono      -> mono
-			   stereo    -> stereo
-			   bilingual -> lang2 */
-			cx25840_and_or(client, 0x809, ~0xf, 0x01);
-			break;
-		default:
-			return -EINVAL;
-	}
-	state->audmode = vt->audmode;
-	return 0;
-}
-
-static int cx25840_reset(struct v4l2_subdev *sd, u32 val)
-{
-	struct cx25840_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (is_cx2583x(state))
-		cx25836_initialize(client);
-	else if (is_cx2388x(state))
-		cx23885_initialize(client);
-	else if (is_cx231xx(state))
-		cx231xx_initialize(client);
-	else
-		cx25840_initialize(client);
-	return 0;
-}
-
-static int cx25840_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct cx25840_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, state->id, state->rev);
-}
-
-static int cx25840_log_status(struct v4l2_subdev *sd)
-{
-	struct cx25840_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	log_video_status(client);
-	if (!is_cx2583x(state))
-		log_audio_status(client);
-	cx25840_ir_log_status(sd);
-	v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
-	return 0;
-}
-
-static int cx23885_irq_handler(struct v4l2_subdev *sd, u32 status,
-			       bool *handled)
-{
-	struct cx25840_state *state = to_state(sd);
-	struct i2c_client *c = v4l2_get_subdevdata(sd);
-	u8 irq_stat, aud_stat, aud_en, ir_stat, ir_en;
-	u32 vid_stat, aud_mc_stat;
-	bool block_handled;
-	int ret = 0;
-
-	irq_stat = cx25840_read(c, CX23885_PIN_CTRL_IRQ_REG);
-	v4l_dbg(2, cx25840_debug, c, "AV Core IRQ status (entry): %s %s %s\n",
-		irq_stat & CX23885_PIN_CTRL_IRQ_IR_STAT ? "ir" : "  ",
-		irq_stat & CX23885_PIN_CTRL_IRQ_AUD_STAT ? "aud" : "   ",
-		irq_stat & CX23885_PIN_CTRL_IRQ_VID_STAT ? "vid" : "   ");
-
-	if ((is_cx23885(state) || is_cx23887(state))) {
-		ir_stat = cx25840_read(c, CX25840_IR_STATS_REG);
-		ir_en = cx25840_read(c, CX25840_IR_IRQEN_REG);
-		v4l_dbg(2, cx25840_debug, c,
-			"AV Core ir IRQ status: %#04x disables: %#04x\n",
-			ir_stat, ir_en);
-		if (irq_stat & CX23885_PIN_CTRL_IRQ_IR_STAT) {
-			block_handled = false;
-			ret = cx25840_ir_irq_handler(sd,
-						     status, &block_handled);
-			if (block_handled)
-				*handled = true;
-		}
-	}
-
-	aud_stat = cx25840_read(c, CX25840_AUD_INT_STAT_REG);
-	aud_en = cx25840_read(c, CX25840_AUD_INT_CTRL_REG);
-	v4l_dbg(2, cx25840_debug, c,
-		"AV Core audio IRQ status: %#04x disables: %#04x\n",
-		aud_stat, aud_en);
-	aud_mc_stat = cx25840_read4(c, CX23885_AUD_MC_INT_MASK_REG);
-	v4l_dbg(2, cx25840_debug, c,
-		"AV Core audio MC IRQ status: %#06x enables: %#06x\n",
-		aud_mc_stat >> CX23885_AUD_MC_INT_STAT_SHFT,
-		aud_mc_stat & CX23885_AUD_MC_INT_CTRL_BITS);
-	if (irq_stat & CX23885_PIN_CTRL_IRQ_AUD_STAT) {
-		if (aud_stat) {
-			cx25840_write(c, CX25840_AUD_INT_STAT_REG, aud_stat);
-			*handled = true;
-		}
-	}
-
-	vid_stat = cx25840_read4(c, CX25840_VID_INT_STAT_REG);
-	v4l_dbg(2, cx25840_debug, c,
-		"AV Core video IRQ status: %#06x disables: %#06x\n",
-		vid_stat & CX25840_VID_INT_STAT_BITS,
-		vid_stat >> CX25840_VID_INT_MASK_SHFT);
-	if (irq_stat & CX23885_PIN_CTRL_IRQ_VID_STAT) {
-		if (vid_stat & CX25840_VID_INT_STAT_BITS) {
-			cx25840_write4(c, CX25840_VID_INT_STAT_REG, vid_stat);
-			*handled = true;
-		}
-	}
-
-	irq_stat = cx25840_read(c, CX23885_PIN_CTRL_IRQ_REG);
-	v4l_dbg(2, cx25840_debug, c, "AV Core IRQ status (exit): %s %s %s\n",
-		irq_stat & CX23885_PIN_CTRL_IRQ_IR_STAT ? "ir" : "  ",
-		irq_stat & CX23885_PIN_CTRL_IRQ_AUD_STAT ? "aud" : "   ",
-		irq_stat & CX23885_PIN_CTRL_IRQ_VID_STAT ? "vid" : "   ");
-
-	return ret;
-}
-
-static int cx25840_irq_handler(struct v4l2_subdev *sd, u32 status,
-			       bool *handled)
-{
-	struct cx25840_state *state = to_state(sd);
-
-	*handled = false;
-
-	/* Only support the CX2388[578] AV Core for now */
-	if (is_cx2388x(state))
-		return cx23885_irq_handler(sd, status, handled);
-
-	return -ENODEV;
-}
-
-/* ----------------------------------------------------------------------- */
-
-#define DIF_PLL_FREQ_WORD	(0x300)
-#define DIF_BPF_COEFF01		(0x348)
-#define DIF_BPF_COEFF23		(0x34c)
-#define DIF_BPF_COEFF45		(0x350)
-#define DIF_BPF_COEFF67		(0x354)
-#define DIF_BPF_COEFF89		(0x358)
-#define DIF_BPF_COEFF1011	(0x35c)
-#define DIF_BPF_COEFF1213	(0x360)
-#define DIF_BPF_COEFF1415	(0x364)
-#define DIF_BPF_COEFF1617	(0x368)
-#define DIF_BPF_COEFF1819	(0x36c)
-#define DIF_BPF_COEFF2021	(0x370)
-#define DIF_BPF_COEFF2223	(0x374)
-#define DIF_BPF_COEFF2425	(0x378)
-#define DIF_BPF_COEFF2627	(0x37c)
-#define DIF_BPF_COEFF2829	(0x380)
-#define DIF_BPF_COEFF3031	(0x384)
-#define DIF_BPF_COEFF3233	(0x388)
-#define DIF_BPF_COEFF3435	(0x38c)
-#define DIF_BPF_COEFF36		(0x390)
-
-void cx23885_dif_setup(struct i2c_client *client, u32 ifHz)
-{
-	u64 pll_freq;
-	u32 pll_freq_word;
-
-	v4l_dbg(1, cx25840_debug, client, "%s(%d)\n", __func__, ifHz);
-
-	/* Assuming TV */
-	/* Calculate the PLL frequency word based on the adjusted ifHz */
-        pll_freq = div_u64((u64)ifHz * 268435456, 50000000);
-        pll_freq_word = (u32)pll_freq;
-
-        cx25840_write4(client, DIF_PLL_FREQ_WORD,  pll_freq_word);
-
-	/* Round down to the nearest 100KHz */
-	ifHz = (ifHz / 100000) * 100000;
-
-	if (ifHz < 3000000)
-		ifHz = 3000000;
-
-	if (ifHz > 16000000)
-		ifHz = 16000000;
-
-	v4l_dbg(1, cx25840_debug, client, "%s(%d) again\n", __func__, ifHz);
-
-	switch (ifHz) {
-	case 3000000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00080012);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x001e0024);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x001bfff8);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xffb4ff50);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfed8fe68);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe24fe34);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfebaffc7);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x014d031f);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x04f0065d);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x07010688);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x04c901d6);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xfe00f9d3);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf600f342);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf235f337);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf64efb22);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0105070f);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x0c460fce);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 3100000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000001);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00070012);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x00220032);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x00370026);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xfff0ff91);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff0efe7c);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe01fdcc);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe0afedb);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x00440224);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x0434060c);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x0738074e);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x06090361);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xff99fb39);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf6fef3b6);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf21af2a5);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf573fa33);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0034067d);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x0bfb0fb9);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 3200000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000000);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0004000e);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x00200038);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x004c004f);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x002fffdf);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff5cfeb6);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe0dfd92);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd7ffe03);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xff36010a);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x03410575);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x072607d2);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x071804d5);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0134fcb7);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf81ff451);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf223f22e);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf4a7f94b);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xff6405e8);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x0bae0fa4);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 3300000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000ffff);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00000008);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x001a0036);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0056006d);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00670030);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xffbdff10);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe46fd8d);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd25fd4f);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe35ffe0);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x0224049f);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x06c9080e);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x07ef0627);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x02c9fe45);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf961f513);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf250f1d2);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf3ecf869);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xfe930552);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x0b5f0f8f);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 3400000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffe);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffd0001);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x000f002c);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0054007d);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x0093007c);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x0024ff82);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfea6fdbb);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd03fcca);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51feb9);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x00eb0392);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x06270802);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x08880750);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x044dffdb);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xfabdf5f8);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2a0f193);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf342f78f);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xfdc404b9);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x0b0e0f78);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 3500000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffafff9);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0002001b);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0046007d);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00ad00ba);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00870000);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xff26fe1a);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd1bfc7e);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99fda4);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xffa5025c);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x054507ad);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x08dd0847);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x05b80172);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xfc2ef6ff);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf313f170);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf2abf6bd);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xfcf6041f);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x0abc0f61);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 3600000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fff3);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xfff50006);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x002f006c);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00b200e3);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00dc007e);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xffb9fea0);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd6bfc71);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17fcb1);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfe65010b);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x042d0713);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x08ec0906);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x07020302);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xfdaff823);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf3a7f16a);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf228f5f5);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xfc2a0384);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x0a670f4a);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 3700000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff7ffef);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe9fff1);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0010004d);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00a100f2);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x011a00f0);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x0053ff44);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfdedfca2);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3fbef);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfd39ffae);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x02ea0638);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x08b50987);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x08230483);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xff39f960);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf45bf180);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf1b8f537);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xfb6102e7);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x0a110f32);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 3800000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9ffee);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe1ffdd);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xfff00024);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x007c00e5);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x013a014a);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x00e6fff8);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe98fd0f);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3fb67);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfc32fe54);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x01880525);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x083909c7);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x091505ee);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x00c7fab3);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf52df1b4);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf15df484);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xfa9b0249);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x09ba0f19);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 3900000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000000);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffbfff0);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffdeffcf);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffd1fff6);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x004800be);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x01390184);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x016300ac);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xff5efdb1);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17fb23);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb5cfd0d);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x001703e4);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x077b09c4);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x09d2073c);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0251fc18);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf61cf203);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf118f3dc);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf9d801aa);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x09600eff);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 4000000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000001);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffefff4);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe1ffc8);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffbaffca);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x000b0082);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x01170198);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01c10152);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x0030fe7b);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99fb24);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfac3fbe9);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfea5027f);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x0683097f);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a560867);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x03d2fd89);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf723f26f);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0e8f341);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf919010a);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x09060ee5);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 4100000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00010002);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0002fffb);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe8ffca);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffacffa4);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xffcd0036);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00d70184);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01f601dc);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x00ffff60);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51fb6d);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa6efaf5);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfd410103);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x055708f9);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a9e0969);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0543ff02);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf842f2f5);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0cef2b2);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf85e006b);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x08aa0ecb);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 4200000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00010003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00050003);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xfff3ffd3);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffaaff8b);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff95ffe5);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x0080014a);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01fe023f);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x01ba0050);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe35fbf8);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa62fa3b);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfbf9ff7e);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x04010836);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0aa90a3d);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x069f007f);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf975f395);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0cbf231);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf7a9ffcb);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x084c0eaf);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 4300000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00010003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0008000a);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0000ffe4);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffb4ff81);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff6aff96);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x001c00f0);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01d70271);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x0254013b);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xff36fcbd);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa9ff9c5);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfadbfdfe);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x028c073b);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a750adf);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x07e101fa);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xfab8f44e);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0ddf1be);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf6f9ff2b);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x07ed0e94);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 4400000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0009000f);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x000efff8);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffc9ff87);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff52ff54);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xffb5007e);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01860270);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x02c00210);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x0044fdb2);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb22f997);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf9f2fc90);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x0102060f);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a050b4c);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0902036e);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xfc0af51e);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf106f15a);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf64efe8b);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x078d0e77);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 4500000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00080012);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0019000e);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffe5ff9e);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff4fff25);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff560000);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x0112023b);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x02f702c0);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x014dfec8);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfbe5f9b3);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf947fb41);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xff7004b9);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x095a0b81);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0a0004d8);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xfd65f603);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf144f104);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf5aafdec);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x072b0e5a);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 4600000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000001);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00060012);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x00200022);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0005ffc1);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff61ff10);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff09ff82);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x008601d7);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x02f50340);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x0241fff0);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfcddfa19);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8e2fa1e);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfde30343);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x08790b7f);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0ad50631);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xfec7f6fc);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf198f0bd);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf50dfd4e);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x06c90e3d);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 4700000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000ffff);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0003000f);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x00220030);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0025ffed);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff87ff15);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfed6ff10);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xffed014c);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x02b90386);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x03110119);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfdfefac4);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8c6f92f);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfc6701b7);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x07670b44);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0b7e0776);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x002df807);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf200f086);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf477fcb1);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x06650e1e);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 4800000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffe);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xffff0009);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x001e0038);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x003f001b);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xffbcff36);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfec2feb6);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xff5600a5);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x0248038d);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b00232);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xff39fbab);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8f4f87f);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfb060020);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x062a0ad2);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0bf908a3);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0192f922);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf27df05e);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf3e8fc14);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x06000e00);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 4900000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffc0002);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x00160037);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x00510046);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xfff9ff6d);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfed0fe7c);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfecefff0);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x01aa0356);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x0413032b);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x007ffcc5);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf96cf812);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf9cefe87);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x04c90a2c);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c4309b4);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x02f3fa4a);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf30ef046);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf361fb7a);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x059b0de0);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 5000000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9fffa);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x000a002d);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x00570067);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x0037ffb5);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfefffe68);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe62ff3d);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x00ec02e3);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x043503f6);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x01befe05);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfa27f7ee);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf8c6fcf8);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x034c0954);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c5c0aa4);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x044cfb7e);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf3b1f03f);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf2e2fae1);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x05340dc0);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 5100000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fff4);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xfffd001e);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0051007b);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x006e0006);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff48fe7c);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe1bfe9a);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x001d023e);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x04130488);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x02e6ff5b);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfb1ef812);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf7f7fb7f);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x01bc084e);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c430b72);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x059afcba);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf467f046);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf26cfa4a);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x04cd0da0);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 5200000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8ffef);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xfff00009);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x003f007f);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00980056);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xffa5feb6);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe00fe15);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xff4b0170);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b004d7);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x03e800b9);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfc48f87f);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf768fa23);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0022071f);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0bf90c1b);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x06dafdfd);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf52df05e);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf1fef9b5);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x04640d7f);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 5300000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000ffff);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9ffee);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe6fff3);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x00250072);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00af009c);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x000cff10);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe13fdb8);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe870089);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x031104e1);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x04b8020f);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfd98f92f);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf71df8f0);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xfe8805ce);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0b7e0c9c);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0808ff44);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf603f086);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf19af922);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x03fb0d5e);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 5400000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000001);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffcffef);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe0ffe0);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x00050056);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00b000d1);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x0071ff82);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe53fd8c);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfddfff99);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x024104a3);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x054a034d);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xff01fa1e);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf717f7ed);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xfcf50461);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0ad50cf4);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0921008d);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf6e7f0bd);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf13ff891);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x03920d3b);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 5500000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00010002);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffffff3);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffdeffd1);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffe5002f);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x009c00ed);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00cb0000);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfebafd94);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd61feb0);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x014d0422);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x05970464);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x0074fb41);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf759f721);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xfb7502de);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0a000d21);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0a2201d4);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf7d9f104);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf0edf804);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x03280d19);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 5600000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00010003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0003fffa);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe3ffc9);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffc90002);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x007500ef);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x010e007e);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xff3dfdcf);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd16fddd);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x00440365);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x059b0548);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x01e3fc90);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf7dff691);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xfa0f014d);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x09020d23);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0b0a0318);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf8d7f15a);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf0a5f779);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x02bd0cf6);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 5700000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00010003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00060001);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffecffc9);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffb4ffd4);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x004000d5);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x013600f0);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xffd3fe39);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd04fd31);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xff360277);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x055605ef);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x033efdfe);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf8a5f642);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf8cbffb6);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x07e10cfb);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0bd50456);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf9dff1be);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf067f6f2);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x02520cd2);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 5800000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00080009);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xfff8ffd2);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffaaffac);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x000200a3);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x013c014a);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x006dfec9);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd2bfcb7);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe350165);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x04cb0651);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x0477ff7e);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf9a5f635);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf7b1fe20);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x069f0ca8);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0c81058b);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xfaf0f231);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf033f66d);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x01e60cae);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 5900000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0009000e);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0005ffe1);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffacff90);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xffc5005f);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x01210184);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x00fcff72);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd8afc77);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51003f);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x04020669);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x05830103);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfad7f66b);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf6c8fc93);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x05430c2b);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d0d06b5);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xfc08f2b2);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf00af5ec);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x017b0c89);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 6000000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000001);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00070012);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0012fff5);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffbaff82);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff8e000f);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00e80198);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01750028);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe18fc75);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99ff15);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x03050636);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x0656027f);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfc32f6e2);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf614fb17);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x03d20b87);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d7707d2);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xfd26f341);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xefeaf56f);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x010f0c64);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 6100000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0000);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00050012);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x001c000b);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffd1ff84);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff66ffbe);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00960184);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01cd00da);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfeccfcb2);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17fdf9);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x01e005bc);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x06e703e4);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfdabf798);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf599f9b3);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x02510abd);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0dbf08df);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xfe48f3dc);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xefd5f4f6);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x00a20c3e);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 6200000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffe);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0002000f);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0021001f);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xfff0ff97);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff50ff74);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x0034014a);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01fa0179);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xff97fd2a);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3fcfa);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x00a304fe);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x07310525);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xff37f886);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf55cf86e);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x00c709d0);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0de209db);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xff6df484);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xefcbf481);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0x00360c18);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 6300000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffe000a);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0021002f);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0010ffb8);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff50ff3b);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xffcc00f0);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01fa01fa);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x0069fdd4);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3fc26);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xff5d0407);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x07310638);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x00c9f9a8);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf55cf74e);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xff3908c3);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0de20ac3);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0093f537);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xefcbf410);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xffca0bf2);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 6400000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffb0003);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x001c0037);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x002fffe2);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff66ff17);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff6a007e);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01cd0251);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x0134fea5);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17fb8b);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfe2002e0);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x06e70713);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x0255faf5);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf599f658);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xfdaf0799);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0dbf0b96);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x01b8f5f5);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xefd5f3a3);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xff5e0bca);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 6500000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9fffb);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x00120037);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x00460010);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff8eff0f);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff180000);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01750276);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x01e8ff8d);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99fb31);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfcfb0198);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x065607ad);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x03cefc64);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf614f592);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xfc2e0656);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d770c52);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x02daf6bd);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xefeaf33b);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xfef10ba3);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 6600000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff7fff5);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0005002f);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0054003c);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xffc5ff22);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfedfff82);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x00fc0267);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x0276007e);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51fb1c);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfbfe003e);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x05830802);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x0529fdec);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf6c8f4fe);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xfabd04ff);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d0d0cf6);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x03f8f78f);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf00af2d7);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xfe850b7b);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 6700000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000ffff);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fff0);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xfff80020);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x00560060);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x0002ff4e);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfec4ff10);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x006d0225);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x02d50166);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe35fb4e);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb35fee1);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x0477080e);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x065bff82);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf7b1f4a0);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf9610397);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0c810d80);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0510f869);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf033f278);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xfe1a0b52);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 6800000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00010000);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffaffee);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffec000c);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x004c0078);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x0040ff8e);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfecafeb6);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xffd301b6);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x02fc0235);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xff36fbc5);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfaaafd90);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x033e07d2);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x075b011b);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf8cbf47a);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf81f0224);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0bd50def);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0621f94b);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf067f21e);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xfdae0b29);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 6900000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00010001);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffdffef);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe3fff6);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0037007f);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x0075ffdc);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfef2fe7c);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xff3d0122);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x02ea02dd);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x0044fc79);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa65fc5d);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x01e3074e);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x082102ad);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xfa0ff48c);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf6fe00a9);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0b0a0e43);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0729fa33);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf0a5f1c9);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xfd430b00);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 7000000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00010002);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0001fff3);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffdeffe2);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x001b0076);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x009c002d);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff35fe68);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfeba0076);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x029f0352);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x014dfd60);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa69fb53);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x00740688);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x08a7042d);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xfb75f4d6);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf600ff2d);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0a220e7a);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0827fb22);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf0edf17a);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xfcd80ad6);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 7100000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0004fff9);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe0ffd2);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xfffb005e);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00b0007a);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff8ffe7c);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe53ffc1);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x0221038c);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x0241fe6e);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfab6fa80);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xff010587);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x08e90590);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xfcf5f556);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf52bfdb3);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x09210e95);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0919fc15);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf13ff12f);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xfc6e0aab);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 7200000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00070000);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe6ffc9);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffdb0039);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00af00b8);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfff4feb6);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe13ff10);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x01790388);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x0311ff92);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb48f9ed);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfd980453);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x08e306cd);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xfe88f60a);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf482fc40);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x08080e93);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x09fdfd0c);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf19af0ea);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xfc050a81);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 7300000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00080008);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xfff0ffc9);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffc1000d);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x009800e2);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x005bff10);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe00fe74);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x00b50345);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b000bc);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfc18f9a1);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfc4802f9);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x089807dc);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0022f6f0);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf407fada);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x06da0e74);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0ad3fe06);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf1fef0ab);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xfb9c0a55);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 7400000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000001);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0008000e);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xfffdffd0);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffafffdf);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x006e00f2);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00b8ff82);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe1bfdf8);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xffe302c8);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x041301dc);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfd1af99e);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfb1e0183);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x080908b5);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x01bcf801);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf3bdf985);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x059a0e38);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0b99ff03);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf26cf071);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xfb330a2a);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 7500000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0000);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00070011);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x000affdf);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffa9ffb5);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x003700e6);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x01010000);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe62fda8);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xff140219);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x043502e1);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfe42f9e6);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfa270000);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x073a0953);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x034cf939);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf3a4f845);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x044c0de1);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0c4f0000);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf2e2f03c);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xfacc09fe);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 7600000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xffffffff);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00040012);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0016fff3);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffafff95);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xfff900c0);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x0130007e);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfecefd89);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe560146);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x041303bc);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xff81fa76);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf96cfe7d);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x063209b1);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x04c9fa93);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf3bdf71e);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x02f30d6e);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0cf200fd);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf361f00e);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xfa6509d1);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 7700000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffe);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00010010);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x001e0008);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffc1ff84);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xffbc0084);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x013e00f0);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xff56fd9f);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfdb8005c);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b00460);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x00c7fb45);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8f4fd07);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x04fa09ce);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x062afc07);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf407f614);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x01920ce0);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0d8301fa);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf3e8efe5);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xfa0009a4);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 7800000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffd000b);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0022001d);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffdbff82);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff870039);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x012a014a);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xffedfde7);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd47ff6b);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x031104c6);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x0202fc4c);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8c6fbad);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x039909a7);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0767fd8e);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf482f52b);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x002d0c39);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0e0002f4);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf477efc2);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf99b0977);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 7900000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffa0004);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0020002d);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xfffbff91);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff61ffe8);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00f70184);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x0086fe5c);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd0bfe85);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x024104e5);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x0323fd7d);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8e2fa79);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x021d093f);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0879ff22);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf52bf465);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xfec70b79);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0e6803eb);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf50defa5);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf937094a);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 8000000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fffd);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x00190036);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x001bffaf);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff4fff99);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00aa0198);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x0112fef3);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd09fdb9);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x014d04be);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x041bfecc);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf947f978);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x00900897);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x095a00b9);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf600f3c5);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xfd650aa3);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0ebc04de);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf5aaef8e);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf8d5091c);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 8100000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000ffff);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff7fff6);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x000e0038);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0037ffd7);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff52ff56);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x004b0184);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x0186ffa1);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd40fd16);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x00440452);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x04de0029);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf9f2f8b2);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfefe07b5);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a05024d);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf6fef34d);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xfc0a09b8);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0efa05cd);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf64eef7d);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf87308ed);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 8200000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00010000);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fff0);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x00000031);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x004c0005);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff6aff27);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xffe4014a);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01d70057);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfdacfca6);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xff3603a7);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x05610184);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfadbf82e);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfd74069f);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a7503d6);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf81ff2ff);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xfab808b9);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0f2306b5);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf6f9ef72);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf81308bf);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 8300000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00010001);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffbffee);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xfff30022);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x00560032);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff95ff10);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff8000f0);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01fe0106);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe46fc71);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe3502c7);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x059e02ce);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfbf9f7f2);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfbff055b);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0aa9054c);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf961f2db);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf97507aa);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0f350797);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf7a9ef6d);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf7b40890);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 8400000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00010002);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffeffee);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe8000f);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x00540058);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xffcdff14);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff29007e);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01f6019e);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xff01fc7c);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd5101bf);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x059203f6);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfd41f7fe);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfaa903f3);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a9e06a9);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xfabdf2e2);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf842068b);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0f320871);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf85eef6e);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf7560860);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 8500000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0002fff2);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe1fff9);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x00460073);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x000bff34);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfee90000);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01c10215);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xffd0fcc5);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99009d);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x053d04f1);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfea5f853);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf97d0270);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a5607e4);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xfc2ef314);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf723055f);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0f180943);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf919ef75);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf6fa0830);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 8600000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0005fff8);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffdeffe4);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x002f007f);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x0048ff6b);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfec7ff82);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x0163025f);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x00a2fd47);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17ff73);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x04a405b2);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x0017f8ed);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf88500dc);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x09d208f9);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xfdaff370);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf61c0429);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0ee80a0b);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xf9d8ef82);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf6a00800);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 8700000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0007ffff);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe1ffd4);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0010007a);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x007cffb2);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfec6ff10);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x00e60277);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x0168fdf9);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3fe50);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x03ce0631);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x0188f9c8);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf7c7ff43);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x091509e3);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xff39f3f6);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf52d02ea);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0ea30ac9);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xfa9bef95);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf64607d0);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 8800000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00090007);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe9ffca);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xfff00065);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00a10003);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfee6feb6);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x0053025b);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x0213fed0);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3fd46);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x02c70668);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x02eafadb);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf74bfdae);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x08230a9c);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x00c7f4a3);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf45b01a6);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0e480b7c);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xfb61efae);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf5ef079f);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 8900000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0000);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0008000d);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xfff5ffc8);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffd10043);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00b20053);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff24fe7c);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xffb9020c);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x0295ffbb);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17fc64);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x019b0654);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x042dfc1c);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf714fc2a);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x07020b21);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0251f575);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf3a7005e);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0dd80c24);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xfc2aefcd);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf599076e);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 9000000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xffffffff);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00060011);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0002ffcf);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffba0018);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00ad009a);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff79fe68);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xff260192);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x02e500ab);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99fbb6);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x005b05f7);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x0545fd81);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf723fabf);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x05b80b70);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x03d2f669);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf313ff15);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0d550cbf);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xfcf6eff2);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf544073d);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 9100000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffe);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00030012);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x000fffdd);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffacffea);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x009300cf);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xffdcfe7c);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfea600f7);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x02fd0190);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51fb46);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xff150554);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x0627fefd);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf778f978);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x044d0b87);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0543f77d);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2a0fdcf);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0cbe0d4e);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xfdc4f01d);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf4f2070b);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 9200000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00000010);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x001afff0);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffaaffbf);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x006700ed);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x0043feb6);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe460047);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x02db0258);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe35fb1b);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfddc0473);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x06c90082);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf811f85e);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x02c90b66);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x069ff8ad);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf250fc8d);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0c140dcf);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xfe93f04d);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf4a106d9);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 9300000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffc000c);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x00200006);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffb4ff9c);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x002f00ef);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00a4ff10);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe0dff92);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x028102f7);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xff36fb37);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfcbf035e);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x07260202);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf8e8f778);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x01340b0d);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x07e1f9f4);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf223fb51);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0b590e42);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xff64f083);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf45206a7);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 9400000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff90005);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0022001a);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffc9ff86);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xfff000d7);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00f2ff82);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe01fee5);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x01f60362);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x0044fb99);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfbcc0222);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x07380370);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf9f7f6cc);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xff990a7e);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0902fb50);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf21afa1f);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0a8d0ea6);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0034f0bf);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf4050675);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 9500000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fffe);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x001e002b);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffe5ff81);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xffb400a5);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x01280000);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe24fe50);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x01460390);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x014dfc3a);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb1000ce);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x070104bf);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfb37f65f);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xfe0009bc);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0a00fcbb);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf235f8f8);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x09b20efc);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0105f101);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf3ba0642);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 9600000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0001ffff);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fff7);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x00150036);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0005ff8c);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff810061);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x013d007e);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe71fddf);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x007c0380);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x0241fd13);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa94ff70);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x068005e2);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfc9bf633);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xfc7308ca);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0ad5fe30);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf274f7e0);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x08c90f43);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x01d4f147);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf371060f);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 9700000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00010001);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9fff1);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x00090038);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0025ffa7);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff5e0012);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x013200f0);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfee3fd9b);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xffaa0331);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x0311fe15);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa60fe18);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x05bd06d1);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfe1bf64a);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xfafa07ae);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0b7effab);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2d5f6d7);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x07d30f7a);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x02a3f194);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf32905dc);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 9800000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00010002);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffcffee);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xfffb0032);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x003fffcd);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff4effc1);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x0106014a);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xff6efd8a);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfedd02aa);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b0ff34);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa74fcd7);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x04bf0781);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xffaaf6a3);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf99e066b);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0bf90128);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf359f5e1);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x06d20fa2);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0370f1e5);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf2e405a8);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 9900000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xffffffee);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffef0024);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0051fffa);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff54ff77);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00be0184);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x0006fdad);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe2701f3);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x0413005e);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfad1fbba);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x039007ee);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x013bf73d);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf868050a);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c4302a1);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf3fdf4fe);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x05c70fba);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x043bf23c);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf2a10575);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 10000000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0003fff1);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe50011);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x00570027);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff70ff3c);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00620198);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x009efe01);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd95011a);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x04350183);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb71fad0);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x023c0812);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x02c3f811);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf75e0390);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c5c0411);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf4c1f432);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x04b30fc1);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0503f297);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf2610541);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 10100000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0006fff7);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffdffffc);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x00510050);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff9dff18);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfffc0184);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x0128fe80);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd32002e);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x04130292);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfc4dfa21);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x00d107ee);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x0435f91c);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf6850205);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c430573);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf5a1f37d);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x03990fba);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x05c7f2f8);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf222050d);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 10200000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0008fffe);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffdfffe7);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x003f006e);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xffd6ff0f);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff96014a);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x0197ff1f);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd05ff3e);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b0037c);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfd59f9b7);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xff5d0781);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x0585fa56);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf5e4006f);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0bf906c4);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf69df2e0);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x02790fa2);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0688f35d);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf1e604d8);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 10300000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0001);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00090005);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe4ffd6);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0025007e);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x0014ff20);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff3c00f0);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01e1ffd0);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd12fe5c);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x03110433);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfe88f996);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfdf106d1);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x06aafbb7);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf57efed8);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0b7e07ff);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf7b0f25e);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x01560f7a);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0745f3c7);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf1ac04a4);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 10400000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xffffffff);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0008000c);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffedffcb);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0005007d);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x0050ff4c);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfef6007e);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01ff0086);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd58fd97);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x024104ad);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xffcaf9c0);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfc9905e2);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x079afd35);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf555fd46);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0ad50920);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf8d9f1f6);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x00310f43);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x07fdf435);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf174046f);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 10500000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xfffffffe);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00050011);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xfffaffc8);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffe5006b);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x0082ff8c);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfecc0000);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01f00130);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfdd2fcfc);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x014d04e3);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x010efa32);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfb6404bf);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x084efec5);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf569fbc2);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0a000a23);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xfa15f1ab);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xff0b0efc);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x08b0f4a7);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf13f043a);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 10600000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00020012);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0007ffcd);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffc9004c);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00a4ffd9);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfec3ff82);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01b401c1);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe76fc97);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x004404d2);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x0245fae8);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfa5f0370);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x08c1005f);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf5bcfa52);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x09020b04);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xfb60f17b);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xfde70ea6);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x095df51e);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf10c0405);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 10700000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xffff0011);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0014ffdb);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffb40023);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00b2002a);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfedbff10);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x0150022d);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xff38fc6f);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xff36047b);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x035efbda);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf9940202);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x08ee01f5);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf649f8fe);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x07e10bc2);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xfcb6f169);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xfcc60e42);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0a04f599);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf0db03d0);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 10800000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffb000d);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x001dffed);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffaafff5);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00aa0077);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff13feb6);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x00ce026b);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x000afc85);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe3503e3);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x044cfcfb);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf90c0082);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x08d5037f);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf710f7cc);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x069f0c59);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xfe16f173);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xfbaa0dcf);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0aa5f617);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf0ad039b);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 10900000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff90006);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x00210003);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffacffc8);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x008e00b6);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff63fe7c);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x003a0275);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x00dafcda);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd510313);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x0501fe40);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8cbfefd);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x087604f0);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf80af6c2);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x05430cc8);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xff7af19a);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xfa940d4e);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0b3ff699);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf0810365);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 11000000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0001ffff);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8ffff);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x00210018);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffbaffa3);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x006000e1);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xffc4fe68);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xffa0024b);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x019afd66);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc990216);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x0575ff99);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8d4fd81);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x07d40640);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf932f5e6);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x03d20d0d);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x00dff1de);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf9860cbf);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0bd1f71e);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf058032f);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 11100000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00010000);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fff8);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x001b0029);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffd1ff8a);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x002600f2);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x002cfe7c);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xff0f01f0);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x023bfe20);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc1700fa);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x05a200f7);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf927fc1c);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x06f40765);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xfa82f53b);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x02510d27);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0243f23d);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf8810c24);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0c5cf7a7);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf03102fa);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 11200000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00010002);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffafff2);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x00110035);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xfff0ff81);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xffe700e7);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x008ffeb6);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe94016d);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x02b0fefb);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3ffd1);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x05850249);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf9c1fadb);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x05de0858);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xfbf2f4c4);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x00c70d17);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x03a0f2b8);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf7870b7c);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0cdff833);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf00d02c4);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 11300000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffdffee);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x00040038);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0010ff88);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xffac00c2);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00e2ff10);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe3900cb);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x02f1ffe9);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3feaa);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x05210381);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfa9cf9c8);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x04990912);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xfd7af484);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xff390cdb);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x04f4f34d);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf69a0ac9);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0d5af8c1);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xefec028e);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 11400000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0000ffee);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xfff60033);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x002fff9f);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff7b0087);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x011eff82);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe080018);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x02f900d8);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17fd96);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x04790490);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfbadf8ed);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x032f098e);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xff10f47d);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xfdaf0c75);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x063cf3fc);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf5ba0a0b);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0dccf952);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xefcd0258);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 11500000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0004fff1);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffea0026);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0046ffc3);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff5a003c);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x013b0000);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe04ff63);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x02c801b8);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99fca6);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x0397056a);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfcecf853);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x01ad09c9);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x00acf4ad);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xfc2e0be7);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0773f4c2);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf4e90943);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0e35f9e6);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xefb10221);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 11600000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0007fff6);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe20014);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0054ffee);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff4effeb);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x0137007e);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe2efebb);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x0260027a);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51fbe6);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x02870605);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfe4af7fe);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x001d09c1);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0243f515);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xfabd0b32);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0897f59e);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf4280871);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0e95fa7c);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xef9701eb);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 11700000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0001);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0008fffd);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffdeffff);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0056001d);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff57ff9c);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x011300f0);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe82fe2e);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x01ca0310);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe35fb62);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x0155065a);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xffbaf7f2);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfe8c0977);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x03cef5b2);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf9610a58);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x09a5f68f);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf3790797);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0eebfb14);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xef8001b5);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 11800000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0000);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00080004);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe0ffe9);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x004c0047);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff75ff58);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00d1014a);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfef9fdc8);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x0111036f);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xff36fb21);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x00120665);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x012df82e);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfd0708ec);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0542f682);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf81f095c);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0a9af792);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf2db06b5);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0f38fbad);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xef6c017e);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 11900000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xffffffff);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0007000b);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe7ffd8);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x00370068);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xffa4ff28);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00790184);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xff87fd91);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x00430392);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x0044fb26);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfece0626);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x0294f8b2);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfb990825);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0698f77f);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf6fe0842);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0b73f8a7);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf25105cd);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0f7bfc48);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xef5a0148);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 12000000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00050010);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xfff2ffcc);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x001b007b);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xffdfff10);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00140198);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x0020fd8e);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xff710375);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x014dfb73);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfd9a059f);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x03e0f978);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfa4e0726);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x07c8f8a7);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf600070c);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0c2ff9c9);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf1db04de);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0fb4fce5);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xef4b0111);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 12100000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00010012);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffffffc8);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xfffb007e);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x001dff14);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xffad0184);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x00b7fdbe);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfea9031b);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x0241fc01);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfc8504d6);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x0504fa79);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf93005f6);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x08caf9f2);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf52b05c0);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0ccbfaf9);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf17903eb);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0fe3fd83);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xef3f00db);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 12200000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffe0011);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x000cffcc);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffdb0071);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x0058ff32);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff4f014a);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x013cfe1f);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfdfb028a);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x0311fcc9);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb9d03d6);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x05f4fbad);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf848049d);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0999fb5b);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf4820461);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d46fc32);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf12d02f4);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x1007fe21);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xef3600a4);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 12300000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffa000e);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0017ffd9);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffc10055);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x0088ff68);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff0400f0);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01a6fea7);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd7501cc);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b0fdc0);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfaef02a8);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x06a7fd07);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf79d0326);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a31fcda);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf40702f3);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d9ffd72);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0f601fa);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x1021fec0);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xef2f006d);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 12400000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0001ffff);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff80007);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x001fffeb);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffaf002d);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00a8ffb0);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfed3007e);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01e9ff4c);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd2000ee);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x0413fed8);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa82015c);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x0715fe7d);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf7340198);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a8dfe69);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf3bd017c);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0dd5feb8);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0d500fd);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x1031ff60);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xef2b0037);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 12500000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00010000);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff70000);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x00220000);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffa90000);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00b30000);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfec20000);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x02000000);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd030000);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x04350000);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa5e0000);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x073b0000);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf7110000);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0aac0000);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf3a40000);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0de70000);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0c90000);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x10360000);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xef290000);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 12600000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00010001);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff8fff9);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x001f0015);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffafffd3);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00a80050);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfed3ff82);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01e900b4);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd20ff12);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x04130128);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa82fea4);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x07150183);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf734fe68);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a8d0197);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf3bdfe84);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0dd50148);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0d5ff03);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x103100a0);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xef2bffc9);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 12700000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffafff2);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x00170027);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffc1ffab);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00880098);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff04ff10);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01a60159);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd75fe34);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b00240);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfaeffd58);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x06a702f9);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf79dfcda);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0a310326);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf407fd0d);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d9f028e);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf0f6fe06);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x10210140);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xef2fff93);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 12800000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffeffef);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x000c0034);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffdbff8f);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x005800ce);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff4ffeb6);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x013c01e1);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfdfbfd76);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x03110337);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb9dfc2a);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x05f40453);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf848fb63);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x099904a5);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf482fb9f);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0d4603ce);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf12dfd0c);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x100701df);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xef36ff5c);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 12900000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0001ffee);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffff0038);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xfffbff82);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x001d00ec);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xffadfe7c);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x00b70242);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfea9fce5);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x024103ff);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfc85fb2a);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x05040587);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf930fa0a);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x08ca060e);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf52bfa40);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0ccb0507);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf179fc15);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0fe3027d);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xef3fff25);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 13000000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0005fff0);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xfff20034);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x001bff85);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xffdf00f0);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x0014fe68);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x00200272);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xff71fc8b);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x014d048d);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfd9afa61);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x03e00688);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfa4ef8da);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x07c80759);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf600f8f4);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0c2f0637);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf1dbfb22);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0fb4031b);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xef4bfeef);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 13100000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0001);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0007fff5);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe70028);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0037ff98);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xffa400d8);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x0079fe7c);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xff87026f);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x0043fc6e);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x004404da);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfecef9da);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x0294074e);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfb99f7db);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x06980881);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf6fef7be);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0b730759);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf251fa33);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0f7b03b8);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xef5afeb8);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 13200000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0000);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0008fffc);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe00017);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x004cffb9);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff7500a8);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00d1feb6);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfef90238);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x0111fc91);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xff3604df);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x0012f99b);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x012d07d2);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfd07f714);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0542097e);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf81ff6a4);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x0a9a086e);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf2dbf94b);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0f380453);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xef6cfe82);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 13300000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xffffffff);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00080003);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffde0001);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0056ffe3);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff570064);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x0113ff10);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe8201d2);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x01cafcf0);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe35049e);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x0155f9a6);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xffba080e);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfe8cf689);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x03ce0a4e);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xf961f5a8);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x09a50971);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf379f869);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0eeb04ec);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xef80fe4b);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 13400000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0007000a);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe2ffec);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x00540012);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff4e0015);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x0137ff82);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe2e0145);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x0260fd86);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51041a);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x0287f9fb);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfe4a0802);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x001df63f);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x02430aeb);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xfabdf4ce);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x08970a62);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf428f78f);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0e950584);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xef97fe15);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 13500000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0004000f);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffeaffda);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0046003d);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff5affc4);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x013b0000);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe04009d);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x02c8fe48);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99035a);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x0397fa96);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfcec07ad);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x01adf637);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x00ac0b53);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xfc2ef419);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x07730b3e);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf4e9f6bd);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0e35061a);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xefb1fddf);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 13600000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00000012);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xfff6ffcd);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x002f0061);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff7bff79);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x011e007e);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe08ffe8);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x02f9ff28);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17026a);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x0479fb70);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfbad0713);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x032ff672);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xff100b83);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xfdaff38b);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x063c0c04);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf5baf5f5);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0dcc06ae);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xefcdfda8);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 13700000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffd0012);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0004ffc8);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x00100078);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xffacff3e);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00e200f0);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe39ff35);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x02f10017);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd30156);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x0521fc7f);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfa9c0638);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x0499f6ee);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xfd7a0b7c);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0xff39f325);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x04f40cb3);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf69af537);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0d5a073f);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xefecfd72);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 13800000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0001fffe);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffa000e);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0011ffcb);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xfff0007f);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xffe7ff19);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x008f014a);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe94fe93);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x02b00105);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfbd3002f);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x0585fdb7);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf9c10525);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x05def7a8);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xfbf20b3c);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x00c7f2e9);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x03a00d48);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf787f484);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0cdf07cd);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf00dfd3c);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 13900000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00010000);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff80008);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x001bffd7);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffd10076);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x0026ff0e);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x002c0184);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xff0ffe10);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x023b01e0);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc17ff06);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x05a2ff09);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf92703e4);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x06f4f89b);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xfa820ac5);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0251f2d9);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x02430dc3);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf881f3dc);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0c5c0859);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf031fd06);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 14000000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00010001);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff80001);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0021ffe8);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffba005d);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x0060ff1f);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xffc40198);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xffa0fdb5);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x019a029a);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99fdea);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x05750067);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8d4027f);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x07d4f9c0);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf9320a1a);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x03d2f2f3);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0x00df0e22);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xf986f341);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0bd108e2);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf058fcd1);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 14100000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9fffa);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0021fffd);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffac0038);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x008eff4a);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff630184);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x003afd8b);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x00da0326);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd51fced);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x050101c0);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf8cb0103);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x0876fb10);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf80a093e);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0543f338);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xff7a0e66);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xfa94f2b2);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0b3f0967);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf081fc9b);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 14200000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffbfff3);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x001d0013);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffaa000b);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00aaff89);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff13014a);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x00cefd95);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x000a037b);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe35fc1d);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x044c0305);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf90cff7e);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x08d5fc81);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf7100834);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x069ff3a7);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xfe160e8d);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xfbaaf231);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0aa509e9);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf0adfc65);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 14300000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xffffffef);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x00140025);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffb4ffdd);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00b2ffd6);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfedb00f0);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x0150fdd3);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xff380391);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xff36fb85);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x035e0426);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xf994fdfe);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x08eefe0b);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf6490702);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x07e1f43e);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xfcb60e97);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xfcc6f1be);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x0a040a67);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf0dbfc30);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 14400000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0002ffee);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x00070033);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffc9ffb4);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00a40027);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfec3007e);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01b4fe3f);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe760369);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x0044fb2e);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x02450518);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfa5ffc90);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x08c1ffa1);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf5bc05ae);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0902f4fc);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xfb600e85);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xfde7f15a);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x095d0ae2);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf10cfbfb);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 14500000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0002);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0005ffef);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xfffa0038);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffe5ff95);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00820074);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfecc0000);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01f0fed0);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfdd20304);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x014dfb1d);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x010e05ce);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfb64fb41);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x084e013b);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf569043e);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0a00f5dd);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xfa150e55);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0xff0bf104);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x08b00b59);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf13ffbc6);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 14600000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0001);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0008fff4);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffed0035);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0005ff83);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x005000b4);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfef6ff82);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01ffff7a);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd580269);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x0241fb53);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xffca0640);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfc99fa1e);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x079a02cb);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf55502ba);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0ad5f6e0);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf8d90e0a);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0031f0bd);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x07fd0bcb);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf174fb91);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 14700000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xffffffff);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0009fffb);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe4002a);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0025ff82);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x001400e0);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff3cff10);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01e10030);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd1201a4);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x0311fbcd);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfe88066a);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xfdf1f92f);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x06aa0449);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf57e0128);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0b7ef801);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf7b00da2);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0156f086);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x07450c39);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf1acfb5c);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 14800000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffe);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00080002);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffdf0019);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x003fff92);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xffd600f1);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff96feb6);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x019700e1);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd0500c2);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b0fc84);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfd590649);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0xff5df87f);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x058505aa);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf5e4ff91);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0bf9f93c);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf69d0d20);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0279f05e);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x06880ca3);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf1e6fb28);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 14900000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x00060009);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffdf0004);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0051ffb0);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff9d00e8);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xfffcfe7c);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x01280180);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd32ffd2);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x0413fd6e);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfc4d05df);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x00d1f812);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x043506e4);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf685fdfb);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c43fa8d);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf5a10c83);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0399f046);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x05c70d08);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf222faf3);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 15000000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0003000f);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffe5ffef);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x0057ffd9);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff7000c4);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x0062fe68);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x009e01ff);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfd95fee6);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x0435fe7d);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb710530);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x023cf7ee);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x02c307ef);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf75efc70);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c5cfbef);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf4c10bce);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x04b3f03f);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x05030d69);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf261fabf);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 15100000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0000fffd);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xffff0012);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xffefffdc);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x00510006);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff540089);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00befe7c);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0x00060253);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfe27fe0d);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x0413ffa2);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfad10446);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x0390f812);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0x013b08c3);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf868faf6);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0c43fd5f);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf3fd0b02);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x05c7f046);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x043b0dc4);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf2a1fa8b);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 15200000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0001fffe);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffc0012);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0xfffbffce);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x003f0033);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff4e003f);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x0106feb6);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xff6e0276);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xfeddfd56);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x03b000cc);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa740329);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x04bff87f);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xffaa095d);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xf99ef995);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0bf9fed8);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf3590a1f);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x06d2f05e);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x03700e1b);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf2e4fa58);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 15300000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x0001ffff);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9000f);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0009ffc8);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x00250059);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff5effee);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x0132ff10);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfee30265);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0xffaafccf);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x031101eb);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa6001e8);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x05bdf92f);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfe1b09b6);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xfafaf852);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0b7e0055);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2d50929);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x07d3f086);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x02a30e6c);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf329fa24);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 15400000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00010001);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff80009);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0015ffca);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0x00050074);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xff81ff9f);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x013dff82);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe710221);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x007cfc80);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x024102ed);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfa940090);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x0680fa1e);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfc9b09cd);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xfc73f736);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0ad501d0);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2740820);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x08c9f0bd);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x01d40eb9);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf371f9f1);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 15500000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000002);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff80002);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x001effd5);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffe5007f);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xffb4ff5b);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x01280000);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe2401b0);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x0146fc70);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x014d03c6);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfb10ff32);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x0701fb41);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xfb3709a1);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xfe00f644);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x0a000345);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2350708);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x09b2f104);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x01050eff);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf3baf9be);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 15600000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfff9fffb);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0022ffe6);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffc9007a);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0xfff0ff29);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00f2007e);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe01011b);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x01f6fc9e);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0x00440467);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfbccfdde);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x0738fc90);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf9f70934);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0xff99f582);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x090204b0);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf21a05e1);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0a8df15a);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0x00340f41);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf405f98b);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 15700000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0xfffcfff4);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x0020fffa);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffb40064);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x002fff11);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x00a400f0);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe0d006e);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x0281fd09);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xff3604c9);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfcbffca2);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x0726fdfe);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf8e80888);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x0134f4f3);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x07e1060c);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf22304af);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0b59f1be);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xff640f7d);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf452f959);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 15800000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0x00000003);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0000fff0);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x001a0010);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffaa0041);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x0067ff13);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0x0043014a);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfe46ffb9);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x02dbfda8);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfe3504e5);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xfddcfb8d);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x06c9ff7e);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf81107a2);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x02c9f49a);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x069f0753);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2500373);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0c14f231);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xfe930fb3);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf4a1f927);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 15900000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0002);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0003ffee);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x000f0023);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffac0016);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x0093ff31);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xffdc0184);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xfea6ff09);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x02fdfe70);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfd5104ba);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0xff15faac);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x06270103);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf7780688);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x044df479);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x05430883);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf2a00231);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0cbef2b2);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xfdc40fe3);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf4f2f8f5);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-
-	case 16000000:
-		cx25840_write4(client, DIF_BPF_COEFF01, 0xffff0001);
-		cx25840_write4(client, DIF_BPF_COEFF23, 0x0006ffef);
-		cx25840_write4(client, DIF_BPF_COEFF45, 0x00020031);
-		cx25840_write4(client, DIF_BPF_COEFF67, 0xffbaffe8);
-		cx25840_write4(client, DIF_BPF_COEFF89, 0x00adff66);
-		cx25840_write4(client, DIF_BPF_COEFF1011, 0xff790198);
-		cx25840_write4(client, DIF_BPF_COEFF1213, 0xff26fe6e);
-		cx25840_write4(client, DIF_BPF_COEFF1415, 0x02e5ff55);
-		cx25840_write4(client, DIF_BPF_COEFF1617, 0xfc99044a);
-		cx25840_write4(client, DIF_BPF_COEFF1819, 0x005bfa09);
-		cx25840_write4(client, DIF_BPF_COEFF2021, 0x0545027f);
-		cx25840_write4(client, DIF_BPF_COEFF2223, 0xf7230541);
-		cx25840_write4(client, DIF_BPF_COEFF2425, 0x05b8f490);
-		cx25840_write4(client, DIF_BPF_COEFF2627, 0x03d20997);
-		cx25840_write4(client, DIF_BPF_COEFF2829, 0xf31300eb);
-		cx25840_write4(client, DIF_BPF_COEFF3031, 0x0d55f341);
-		cx25840_write4(client, DIF_BPF_COEFF3233, 0xfcf6100e);
-		cx25840_write4(client, DIF_BPF_COEFF3435, 0xf544f8c3);
-		cx25840_write4(client, DIF_BPF_COEFF36, 0x110d0000);
-		break;
-	}
-}
-
-static void cx23888_std_setup(struct i2c_client *client)
-{
-	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-	v4l2_std_id std = state->std;
-	u32 ifHz;
-
-	cx25840_write4(client, 0x478, 0x6628021F);
-	cx25840_write4(client, 0x400, 0x0);
-	cx25840_write4(client, 0x4b4, 0x20524030);
-	cx25840_write4(client, 0x47c, 0x010a8263);
-
-	if (std & V4L2_STD_NTSC) {
-		v4l_dbg(1, cx25840_debug, client, "%s() Selecting NTSC",
-			__func__);
-
-		/* Horiz / vert timing */
-		cx25840_write4(client, 0x428, 0x1e1e601a);
-		cx25840_write4(client, 0x424, 0x5b2d007a);
-
-		/* DIF NTSC */
-		cx25840_write4(client, 0x304, 0x6503bc0c);
-		cx25840_write4(client, 0x308, 0xbd038c85);
-		cx25840_write4(client, 0x30c, 0x1db4640a);
-		cx25840_write4(client, 0x310, 0x00008800);
-		cx25840_write4(client, 0x314, 0x44400400);
-		cx25840_write4(client, 0x32c, 0x0c800800);
-		cx25840_write4(client, 0x330, 0x27000100);
-		cx25840_write4(client, 0x334, 0x1f296e1f);
-		cx25840_write4(client, 0x338, 0x009f50c1);
-		cx25840_write4(client, 0x340, 0x1befbf06);
-		cx25840_write4(client, 0x344, 0x000035e8);
-
-		/* DIF I/F */
-		ifHz = 5400000;
-
-	} else {
-		v4l_dbg(1, cx25840_debug, client, "%s() Selecting PAL-BG",
-			__func__);
-
-		/* Horiz / vert timing */
-		cx25840_write4(client, 0x428, 0x28244024);
-		cx25840_write4(client, 0x424, 0x5d2d0084);
-
-		/* DIF */
-		cx25840_write4(client, 0x304, 0x6503bc0c);
-		cx25840_write4(client, 0x308, 0xbd038c85);
-		cx25840_write4(client, 0x30c, 0x1db4640a);
-		cx25840_write4(client, 0x310, 0x00008800);
-		cx25840_write4(client, 0x314, 0x44400600);
-		cx25840_write4(client, 0x32c, 0x0c800800);
-		cx25840_write4(client, 0x330, 0x27000100);
-		cx25840_write4(client, 0x334, 0x213530ec);
-		cx25840_write4(client, 0x338, 0x00a65ba8);
-		cx25840_write4(client, 0x340, 0x1befbf06);
-		cx25840_write4(client, 0x344, 0x000035e8);
-
-		/* DIF I/F */
-		ifHz = 6000000;
-	}
-
-	cx23885_dif_setup(client, ifHz);
-
-	/* Explicitly ensure the inputs are reconfigured after
-	 * a standard change.
-	 */
-	set_input(client, state->vid_input, state->aud_input);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_ctrl_ops cx25840_ctrl_ops = {
-	.s_ctrl = cx25840_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops cx25840_core_ops = {
-	.log_status = cx25840_log_status,
-	.g_chip_ident = cx25840_g_chip_ident,
-	.g_ctrl = v4l2_subdev_g_ctrl,
-	.s_ctrl = v4l2_subdev_s_ctrl,
-	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
-	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
-	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
-	.queryctrl = v4l2_subdev_queryctrl,
-	.querymenu = v4l2_subdev_querymenu,
-	.s_std = cx25840_s_std,
-	.g_std = cx25840_g_std,
-	.reset = cx25840_reset,
-	.load_fw = cx25840_load_fw,
-	.s_io_pin_config = common_s_io_pin_config,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.g_register = cx25840_g_register,
-	.s_register = cx25840_s_register,
-#endif
-	.interrupt_service_routine = cx25840_irq_handler,
-};
-
-static const struct v4l2_subdev_tuner_ops cx25840_tuner_ops = {
-	.s_frequency = cx25840_s_frequency,
-	.s_radio = cx25840_s_radio,
-	.g_tuner = cx25840_g_tuner,
-	.s_tuner = cx25840_s_tuner,
-};
-
-static const struct v4l2_subdev_audio_ops cx25840_audio_ops = {
-	.s_clock_freq = cx25840_s_clock_freq,
-	.s_routing = cx25840_s_audio_routing,
-	.s_stream = cx25840_s_audio_stream,
-};
-
-static const struct v4l2_subdev_video_ops cx25840_video_ops = {
-	.s_routing = cx25840_s_video_routing,
-	.s_mbus_fmt = cx25840_s_mbus_fmt,
-	.s_stream = cx25840_s_stream,
-	.g_input_status = cx25840_g_input_status,
-};
-
-static const struct v4l2_subdev_vbi_ops cx25840_vbi_ops = {
-	.decode_vbi_line = cx25840_decode_vbi_line,
-	.s_raw_fmt = cx25840_s_raw_fmt,
-	.s_sliced_fmt = cx25840_s_sliced_fmt,
-	.g_sliced_fmt = cx25840_g_sliced_fmt,
-};
-
-static const struct v4l2_subdev_ops cx25840_ops = {
-	.core = &cx25840_core_ops,
-	.tuner = &cx25840_tuner_ops,
-	.audio = &cx25840_audio_ops,
-	.video = &cx25840_video_ops,
-	.vbi = &cx25840_vbi_ops,
-	.ir = &cx25840_ir_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static u32 get_cx2388x_ident(struct i2c_client *client)
-{
-	u32 ret;
-
-	/* Come out of digital power down */
-	cx25840_write(client, 0x000, 0);
-
-	/* Detecting whether the part is cx23885/7/8 is more
-	 * difficult than it needs to be. No ID register. Instead we
-	 * probe certain registers indicated in the datasheets to look
-	 * for specific defaults that differ between the silicon designs. */
-
-	/* It's either 885/7 if the IR Tx Clk Divider register exists */
-	if (cx25840_read4(client, 0x204) & 0xffff) {
-		/* CX23885 returns bogus repetitive byte values for the DIF,
-		 * which doesn't exist for it. (Ex. 8a8a8a8a or 31313131) */
-		ret = cx25840_read4(client, 0x300);
-		if (((ret & 0xffff0000) >> 16) == (ret & 0xffff)) {
-			/* No DIF */
-			ret = V4L2_IDENT_CX23885_AV;
-		} else {
-			/* CX23887 has a broken DIF, but the registers
-			 * appear valid (but unused), good enough to detect. */
-			ret = V4L2_IDENT_CX23887_AV;
-		}
-	} else if (cx25840_read4(client, 0x300) & 0x0fffffff) {
-		/* DIF PLL Freq Word reg exists; chip must be a CX23888 */
-		ret = V4L2_IDENT_CX23888_AV;
-	} else {
-		v4l_err(client, "Unable to detect h/w, assuming cx23887\n");
-		ret = V4L2_IDENT_CX23887_AV;
-	}
-
-	/* Back into digital power down */
-	cx25840_write(client, 0x000, 2);
-	return ret;
-}
-
-static int cx25840_probe(struct i2c_client *client,
-			 const struct i2c_device_id *did)
-{
-	struct cx25840_state *state;
-	struct v4l2_subdev *sd;
-	int default_volume;
-	u32 id = V4L2_IDENT_NONE;
-	u16 device_id;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -EIO;
-
-	v4l_dbg(1, cx25840_debug, client, "detecting cx25840 client on address 0x%x\n", client->addr << 1);
-
-	device_id = cx25840_read(client, 0x101) << 8;
-	device_id |= cx25840_read(client, 0x100);
-	v4l_dbg(1, cx25840_debug, client, "device_id = 0x%04x\n", device_id);
-
-	/* The high byte of the device ID should be
-	 * 0x83 for the cx2583x and 0x84 for the cx2584x */
-	if ((device_id & 0xff00) == 0x8300) {
-		id = V4L2_IDENT_CX25836 + ((device_id >> 4) & 0xf) - 6;
-	} else if ((device_id & 0xff00) == 0x8400) {
-		id = V4L2_IDENT_CX25840 + ((device_id >> 4) & 0xf);
-	} else if (device_id == 0x0000) {
-		id = get_cx2388x_ident(client);
-	} else if ((device_id & 0xfff0) == 0x5A30) {
-		/* The CX23100 (0x5A3C = 23100) doesn't have an A/V decoder */
-		id = V4L2_IDENT_CX2310X_AV;
-	} else if ((device_id & 0xff) == (device_id >> 8)) {
-		v4l_err(client,
-			"likely a confused/unresponsive cx2388[578] A/V decoder"
-			" found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-		v4l_err(client, "A method to reset it from the cx25840 driver"
-			" software is not known at this time\n");
-		return -ENODEV;
-	} else {
-		v4l_dbg(1, cx25840_debug, client, "cx25840 not found\n");
-		return -ENODEV;
-	}
-
-	state = kzalloc(sizeof(struct cx25840_state), GFP_KERNEL);
-	if (state == NULL)
-		return -ENOMEM;
-
-	sd = &state->sd;
-	v4l2_i2c_subdev_init(sd, client, &cx25840_ops);
-
-	switch (id) {
-	case V4L2_IDENT_CX23885_AV:
-		v4l_info(client, "cx23885 A/V decoder found @ 0x%x (%s)\n",
-			 client->addr << 1, client->adapter->name);
-		break;
-	case V4L2_IDENT_CX23887_AV:
-		v4l_info(client, "cx23887 A/V decoder found @ 0x%x (%s)\n",
-			 client->addr << 1, client->adapter->name);
-		break;
-	case V4L2_IDENT_CX23888_AV:
-		v4l_info(client, "cx23888 A/V decoder found @ 0x%x (%s)\n",
-			 client->addr << 1, client->adapter->name);
-		break;
-	case V4L2_IDENT_CX2310X_AV:
-		v4l_info(client, "cx%d A/V decoder found @ 0x%x (%s)\n",
-			 device_id, client->addr << 1, client->adapter->name);
-		break;
-	case V4L2_IDENT_CX25840:
-	case V4L2_IDENT_CX25841:
-	case V4L2_IDENT_CX25842:
-	case V4L2_IDENT_CX25843:
-		/* Note: revision '(device_id & 0x0f) == 2' was never built. The
-		   marking skips from 0x1 == 22 to 0x3 == 23. */
-		v4l_info(client, "cx25%3x-2%x found @ 0x%x (%s)\n",
-			 (device_id & 0xfff0) >> 4,
-			 (device_id & 0x0f) < 3 ? (device_id & 0x0f) + 1
-						: (device_id & 0x0f),
-			 client->addr << 1, client->adapter->name);
-		break;
-	case V4L2_IDENT_CX25836:
-	case V4L2_IDENT_CX25837:
-	default:
-		v4l_info(client, "cx25%3x-%x found @ 0x%x (%s)\n",
-			 (device_id & 0xfff0) >> 4, device_id & 0x0f,
-			 client->addr << 1, client->adapter->name);
-		break;
-	}
-
-	state->c = client;
-	state->vid_input = CX25840_COMPOSITE7;
-	state->aud_input = CX25840_AUDIO8;
-	state->audclk_freq = 48000;
-	state->audmode = V4L2_TUNER_MODE_LANG1;
-	state->vbi_line_offset = 8;
-	state->id = id;
-	state->rev = device_id;
-	v4l2_ctrl_handler_init(&state->hdl, 9);
-	v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops,
-			V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
-	v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops,
-			V4L2_CID_CONTRAST, 0, 127, 1, 64);
-	v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops,
-			V4L2_CID_SATURATION, 0, 127, 1, 64);
-	v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops,
-			V4L2_CID_HUE, -128, 127, 1, 0);
-	if (!is_cx2583x(state)) {
-		default_volume = cx25840_read(client, 0x8d4);
-		/*
-		 * Enforce the legacy PVR-350/MSP3400 to PVR-150/CX25843 volume
-		 * scale mapping limits to avoid -ERANGE errors when
-		 * initializing the volume control
-		 */
-		if (default_volume > 228) {
-			/* Bottom out at -96 dB, v4l2 vol range 0x2e00-0x2fff */
-			default_volume = 228;
-			cx25840_write(client, 0x8d4, 228);
-		}
-		else if (default_volume < 20) {
-			/* Top out at + 8 dB, v4l2 vol range 0xfe00-0xffff */
-			default_volume = 20;
-			cx25840_write(client, 0x8d4, 20);
-		}
-		default_volume = (((228 - default_volume) >> 1) + 23) << 9;
-
-		state->volume = v4l2_ctrl_new_std(&state->hdl,
-			&cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME,
-			0, 65535, 65535 / 100, default_volume);
-		state->mute = v4l2_ctrl_new_std(&state->hdl,
-			&cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_MUTE,
-			0, 1, 1, 0);
-		v4l2_ctrl_new_std(&state->hdl, &cx25840_audio_ctrl_ops,
-			V4L2_CID_AUDIO_BALANCE,
-			0, 65535, 65535 / 100, 32768);
-		v4l2_ctrl_new_std(&state->hdl, &cx25840_audio_ctrl_ops,
-			V4L2_CID_AUDIO_BASS,
-			0, 65535, 65535 / 100, 32768);
-		v4l2_ctrl_new_std(&state->hdl, &cx25840_audio_ctrl_ops,
-			V4L2_CID_AUDIO_TREBLE,
-			0, 65535, 65535 / 100, 32768);
-	}
-	sd->ctrl_handler = &state->hdl;
-	if (state->hdl.error) {
-		int err = state->hdl.error;
-
-		v4l2_ctrl_handler_free(&state->hdl);
-		kfree(state);
-		return err;
-	}
-	if (!is_cx2583x(state))
-		v4l2_ctrl_cluster(2, &state->volume);
-	v4l2_ctrl_handler_setup(&state->hdl);
-
-	if (client->dev.platform_data) {
-		struct cx25840_platform_data *pdata = client->dev.platform_data;
-
-		state->pvr150_workaround = pdata->pvr150_workaround;
-	}
-
-	cx25840_ir_probe(sd);
-	return 0;
-}
-
-static int cx25840_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct cx25840_state *state = to_state(sd);
-
-	cx25840_ir_remove(sd);
-	v4l2_device_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(&state->hdl);
-	kfree(state);
-	return 0;
-}
-
-static const struct i2c_device_id cx25840_id[] = {
-	{ "cx25840", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, cx25840_id);
-
-static struct i2c_driver cx25840_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "cx25840",
-	},
-	.probe		= cx25840_probe,
-	.remove		= cx25840_remove,
-	.id_table	= cx25840_id,
-};
-
-module_i2c_driver(cx25840_driver);
diff --git a/drivers/media/video/cx25840/cx25840-core.h b/drivers/media/video/cx25840/cx25840-core.h
deleted file mode 100644
index bd4ada2..0000000
--- a/drivers/media/video/cx25840/cx25840-core.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/* cx25840 internal API header
- *
- * Copyright (C) 2003-2004 Chris Kennedy
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#ifndef _CX25840_CORE_H_
-#define _CX25840_CORE_H_
-
-
-#include <linux/videodev2.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-ctrls.h>
-#include <linux/i2c.h>
-
-struct cx25840_ir_state;
-
-struct cx25840_state {
-	struct i2c_client *c;
-	struct v4l2_subdev sd;
-	struct v4l2_ctrl_handler hdl;
-	struct {
-		/* volume cluster */
-		struct v4l2_ctrl *volume;
-		struct v4l2_ctrl *mute;
-	};
-	int pvr150_workaround;
-	int radio;
-	v4l2_std_id std;
-	enum cx25840_video_input vid_input;
-	enum cx25840_audio_input aud_input;
-	u32 audclk_freq;
-	int audmode;
-	int vbi_line_offset;
-	u32 id;
-	u32 rev;
-	int is_initialized;
-	wait_queue_head_t fw_wait;    /* wake up when the fw load is finished */
-	struct work_struct fw_work;   /* work entry for fw load */
-	struct cx25840_ir_state *ir_state;
-};
-
-static inline struct cx25840_state *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct cx25840_state, sd);
-}
-
-static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
-{
-	return &container_of(ctrl->handler, struct cx25840_state, hdl)->sd;
-}
-
-static inline bool is_cx2583x(struct cx25840_state *state)
-{
-	return state->id == V4L2_IDENT_CX25836 ||
-	       state->id == V4L2_IDENT_CX25837;
-}
-
-static inline bool is_cx231xx(struct cx25840_state *state)
-{
-	return state->id == V4L2_IDENT_CX2310X_AV;
-}
-
-static inline bool is_cx2388x(struct cx25840_state *state)
-{
-	return state->id == V4L2_IDENT_CX23885_AV ||
-	       state->id == V4L2_IDENT_CX23887_AV ||
-	       state->id == V4L2_IDENT_CX23888_AV;
-}
-
-static inline bool is_cx23885(struct cx25840_state *state)
-{
-	return state->id == V4L2_IDENT_CX23885_AV;
-}
-
-static inline bool is_cx23887(struct cx25840_state *state)
-{
-	return state->id == V4L2_IDENT_CX23887_AV;
-}
-
-static inline bool is_cx23888(struct cx25840_state *state)
-{
-	return state->id == V4L2_IDENT_CX23888_AV;
-}
-
-/* ----------------------------------------------------------------------- */
-/* cx25850-core.c 							   */
-int cx25840_write(struct i2c_client *client, u16 addr, u8 value);
-int cx25840_write4(struct i2c_client *client, u16 addr, u32 value);
-u8 cx25840_read(struct i2c_client *client, u16 addr);
-u32 cx25840_read4(struct i2c_client *client, u16 addr);
-int cx25840_and_or(struct i2c_client *client, u16 addr, unsigned mask, u8 value);
-int cx25840_and_or4(struct i2c_client *client, u16 addr, u32 and_mask,
-		    u32 or_value);
-void cx25840_std_setup(struct i2c_client *client);
-
-/* ----------------------------------------------------------------------- */
-/* cx25850-firmware.c                                                      */
-int cx25840_loadfw(struct i2c_client *client);
-
-/* ----------------------------------------------------------------------- */
-/* cx25850-audio.c                                                         */
-void cx25840_audio_set_path(struct i2c_client *client);
-int cx25840_s_clock_freq(struct v4l2_subdev *sd, u32 freq);
-
-extern const struct v4l2_ctrl_ops cx25840_audio_ctrl_ops;
-
-/* ----------------------------------------------------------------------- */
-/* cx25850-vbi.c                                                           */
-int cx25840_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt);
-int cx25840_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt);
-int cx25840_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt);
-int cx25840_decode_vbi_line(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi);
-
-/* ----------------------------------------------------------------------- */
-/* cx25850-ir.c                                                            */
-extern const struct v4l2_subdev_ir_ops cx25840_ir_ops;
-int cx25840_ir_log_status(struct v4l2_subdev *sd);
-int cx25840_ir_irq_handler(struct v4l2_subdev *sd, u32 status, bool *handled);
-int cx25840_ir_probe(struct v4l2_subdev *sd);
-int cx25840_ir_remove(struct v4l2_subdev *sd);
-
-#endif
diff --git a/drivers/media/video/cx25840/cx25840-firmware.c b/drivers/media/video/cx25840/cx25840-firmware.c
deleted file mode 100644
index b3169f9..0000000
--- a/drivers/media/video/cx25840/cx25840-firmware.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/* cx25840 firmware functions
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/i2c.h>
-#include <linux/firmware.h>
-#include <media/v4l2-common.h>
-#include <media/cx25840.h>
-
-#include "cx25840-core.h"
-
-/*
- * Mike Isely <isely@pobox.com> - The FWSEND parameter controls the
- * size of the firmware chunks sent down the I2C bus to the chip.
- * Previously this had been set to 1024 but unfortunately some I2C
- * implementations can't transfer data in such big gulps.
- * Specifically, the pvrusb2 driver has a hard limit of around 60
- * bytes, due to the encapsulation there of I2C traffic into USB
- * messages.  So we have to significantly reduce this parameter.
- */
-#define FWSEND 48
-
-#define FWDEV(x) &((x)->dev)
-
-static char *firmware = "";
-
-module_param(firmware, charp, 0444);
-
-MODULE_PARM_DESC(firmware, "Firmware image to load");
-
-static void start_fw_load(struct i2c_client *client)
-{
-	/* DL_ADDR_LB=0 DL_ADDR_HB=0 */
-	cx25840_write(client, 0x800, 0x00);
-	cx25840_write(client, 0x801, 0x00);
-	// DL_MAP=3 DL_AUTO_INC=0 DL_ENABLE=1
-	cx25840_write(client, 0x803, 0x0b);
-	/* AUTO_INC_DIS=1 */
-	cx25840_write(client, 0x000, 0x20);
-}
-
-static void end_fw_load(struct i2c_client *client)
-{
-	/* AUTO_INC_DIS=0 */
-	cx25840_write(client, 0x000, 0x00);
-	/* DL_ENABLE=0 */
-	cx25840_write(client, 0x803, 0x03);
-}
-
-#define CX2388x_FIRMWARE "v4l-cx23885-avcore-01.fw"
-#define CX231xx_FIRMWARE "v4l-cx231xx-avcore-01.fw"
-#define CX25840_FIRMWARE "v4l-cx25840.fw"
-
-static const char *get_fw_name(struct i2c_client *client)
-{
-	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-
-	if (firmware[0])
-		return firmware;
-	if (is_cx2388x(state))
-		return CX2388x_FIRMWARE;
-	if (is_cx231xx(state))
-		return CX231xx_FIRMWARE;
-	return CX25840_FIRMWARE;
-}
-
-static int check_fw_load(struct i2c_client *client, int size)
-{
-	/* DL_ADDR_HB DL_ADDR_LB */
-	int s = cx25840_read(client, 0x801) << 8;
-	s |= cx25840_read(client, 0x800);
-
-	if (size != s) {
-		v4l_err(client, "firmware %s load failed\n",
-				get_fw_name(client));
-		return -EINVAL;
-	}
-
-	v4l_info(client, "loaded %s firmware (%d bytes)\n",
-			get_fw_name(client), size);
-	return 0;
-}
-
-static int fw_write(struct i2c_client *client, const u8 *data, int size)
-{
-	if (i2c_master_send(client, data, size) < size) {
-		v4l_err(client, "firmware load i2c failure\n");
-		return -ENOSYS;
-	}
-
-	return 0;
-}
-
-int cx25840_loadfw(struct i2c_client *client)
-{
-	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
-	const struct firmware *fw = NULL;
-	u8 buffer[FWSEND];
-	const u8 *ptr;
-	const char *fwname = get_fw_name(client);
-	int size, retval;
-	int MAX_BUF_SIZE = FWSEND;
-	u32 gpio_oe = 0, gpio_da = 0;
-
-	if (is_cx2388x(state)) {
-		/* Preserve the GPIO OE and output bits */
-		gpio_oe = cx25840_read(client, 0x160);
-		gpio_da = cx25840_read(client, 0x164);
-	}
-
-	if (is_cx231xx(state) && MAX_BUF_SIZE > 16) {
-		v4l_err(client, " Firmware download size changed to 16 bytes max length\n");
-		MAX_BUF_SIZE = 16;  /* cx231xx cannot accept more than 16 bytes at a time */
-	}
-
-	if (request_firmware(&fw, fwname, FWDEV(client)) != 0) {
-		v4l_err(client, "unable to open firmware %s\n", fwname);
-		return -EINVAL;
-	}
-
-	start_fw_load(client);
-
-	buffer[0] = 0x08;
-	buffer[1] = 0x02;
-
-	size = fw->size;
-	ptr = fw->data;
-	while (size > 0) {
-		int len = min(MAX_BUF_SIZE - 2, size);
-
-		memcpy(buffer + 2, ptr, len);
-
-		retval = fw_write(client, buffer, len + 2);
-
-		if (retval < 0) {
-			release_firmware(fw);
-			return retval;
-		}
-
-		size -= len;
-		ptr += len;
-	}
-
-	end_fw_load(client);
-
-	size = fw->size;
-	release_firmware(fw);
-
-	if (is_cx2388x(state)) {
-		/* Restore GPIO configuration after f/w load */
-		cx25840_write(client, 0x160, gpio_oe);
-		cx25840_write(client, 0x164, gpio_da);
-	}
-
-	return check_fw_load(client, size);
-}
-
-MODULE_FIRMWARE(CX2388x_FIRMWARE);
-MODULE_FIRMWARE(CX231xx_FIRMWARE);
-MODULE_FIRMWARE(CX25840_FIRMWARE);
-
diff --git a/drivers/media/video/cx25840/cx25840-ir.c b/drivers/media/video/cx25840/cx25840-ir.c
deleted file mode 100644
index 38ce76e..0000000
--- a/drivers/media/video/cx25840/cx25840-ir.c
+++ /dev/null
@@ -1,1281 +0,0 @@
-/*
- *  Driver for the Conexant CX2584x Audio/Video decoder chip and related cores
- *
- *  Integrated Consumer Infrared Controller
- *
- *  Copyright (C) 2010  Andy Walls <awalls@md.metrocast.net>
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version 2
- *  of the License, or (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- *  02110-1301, USA.
- */
-
-#include <linux/slab.h>
-#include <linux/kfifo.h>
-#include <linux/module.h>
-#include <media/cx25840.h>
-#include <media/rc-core.h>
-
-#include "cx25840-core.h"
-
-static unsigned int ir_debug;
-module_param(ir_debug, int, 0644);
-MODULE_PARM_DESC(ir_debug, "enable integrated IR debug messages");
-
-#define CX25840_IR_REG_BASE 	0x200
-
-#define CX25840_IR_CNTRL_REG	0x200
-#define CNTRL_WIN_3_3	0x00000000
-#define CNTRL_WIN_4_3	0x00000001
-#define CNTRL_WIN_3_4	0x00000002
-#define CNTRL_WIN_4_4	0x00000003
-#define CNTRL_WIN	0x00000003
-#define CNTRL_EDG_NONE	0x00000000
-#define CNTRL_EDG_FALL	0x00000004
-#define CNTRL_EDG_RISE	0x00000008
-#define CNTRL_EDG_BOTH	0x0000000C
-#define CNTRL_EDG	0x0000000C
-#define CNTRL_DMD	0x00000010
-#define CNTRL_MOD	0x00000020
-#define CNTRL_RFE	0x00000040
-#define CNTRL_TFE	0x00000080
-#define CNTRL_RXE	0x00000100
-#define CNTRL_TXE	0x00000200
-#define CNTRL_RIC	0x00000400
-#define CNTRL_TIC	0x00000800
-#define CNTRL_CPL	0x00001000
-#define CNTRL_LBM	0x00002000
-#define CNTRL_R		0x00004000
-
-#define CX25840_IR_TXCLK_REG	0x204
-#define TXCLK_TCD	0x0000FFFF
-
-#define CX25840_IR_RXCLK_REG	0x208
-#define RXCLK_RCD	0x0000FFFF
-
-#define CX25840_IR_CDUTY_REG	0x20C
-#define CDUTY_CDC	0x0000000F
-
-#define CX25840_IR_STATS_REG	0x210
-#define STATS_RTO	0x00000001
-#define STATS_ROR	0x00000002
-#define STATS_RBY	0x00000004
-#define STATS_TBY	0x00000008
-#define STATS_RSR	0x00000010
-#define STATS_TSR	0x00000020
-
-#define CX25840_IR_IRQEN_REG	0x214
-#define IRQEN_RTE	0x00000001
-#define IRQEN_ROE	0x00000002
-#define IRQEN_RSE	0x00000010
-#define IRQEN_TSE	0x00000020
-#define IRQEN_MSK	0x00000033
-
-#define CX25840_IR_FILTR_REG	0x218
-#define FILTR_LPF	0x0000FFFF
-
-#define CX25840_IR_FIFO_REG	0x23C
-#define FIFO_RXTX	0x0000FFFF
-#define FIFO_RXTX_LVL	0x00010000
-#define FIFO_RXTX_RTO	0x0001FFFF
-#define FIFO_RX_NDV	0x00020000
-#define FIFO_RX_DEPTH	8
-#define FIFO_TX_DEPTH	8
-
-#define CX25840_VIDCLK_FREQ	108000000 /* 108 MHz, BT.656 */
-#define CX25840_IR_REFCLK_FREQ	(CX25840_VIDCLK_FREQ / 2)
-
-/*
- * We use this union internally for convenience, but callers to tx_write
- * and rx_read will be expecting records of type struct ir_raw_event.
- * Always ensure the size of this union is dictated by struct ir_raw_event.
- */
-union cx25840_ir_fifo_rec {
-	u32 hw_fifo_data;
-	struct ir_raw_event ir_core_data;
-};
-
-#define CX25840_IR_RX_KFIFO_SIZE    (256 * sizeof(union cx25840_ir_fifo_rec))
-#define CX25840_IR_TX_KFIFO_SIZE    (256 * sizeof(union cx25840_ir_fifo_rec))
-
-struct cx25840_ir_state {
-	struct i2c_client *c;
-
-	struct v4l2_subdev_ir_parameters rx_params;
-	struct mutex rx_params_lock; /* protects Rx parameter settings cache */
-	atomic_t rxclk_divider;
-	atomic_t rx_invert;
-
-	struct kfifo rx_kfifo;
-	spinlock_t rx_kfifo_lock; /* protect Rx data kfifo */
-
-	struct v4l2_subdev_ir_parameters tx_params;
-	struct mutex tx_params_lock; /* protects Tx parameter settings cache */
-	atomic_t txclk_divider;
-};
-
-static inline struct cx25840_ir_state *to_ir_state(struct v4l2_subdev *sd)
-{
-	struct cx25840_state *state = to_state(sd);
-	return state ? state->ir_state : NULL;
-}
-
-
-/*
- * Rx and Tx Clock Divider register computations
- *
- * Note the largest clock divider value of 0xffff corresponds to:
- * 	(0xffff + 1) * 1000 / 108/2 MHz = 1,213,629.629... ns
- * which fits in 21 bits, so we'll use unsigned int for time arguments.
- */
-static inline u16 count_to_clock_divider(unsigned int d)
-{
-	if (d > RXCLK_RCD + 1)
-		d = RXCLK_RCD;
-	else if (d < 2)
-		d = 1;
-	else
-		d--;
-	return (u16) d;
-}
-
-static inline u16 ns_to_clock_divider(unsigned int ns)
-{
-	return count_to_clock_divider(
-		DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ / 1000000 * ns, 1000));
-}
-
-static inline unsigned int clock_divider_to_ns(unsigned int divider)
-{
-	/* Period of the Rx or Tx clock in ns */
-	return DIV_ROUND_CLOSEST((divider + 1) * 1000,
-				 CX25840_IR_REFCLK_FREQ / 1000000);
-}
-
-static inline u16 carrier_freq_to_clock_divider(unsigned int freq)
-{
-	return count_to_clock_divider(
-			  DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ, freq * 16));
-}
-
-static inline unsigned int clock_divider_to_carrier_freq(unsigned int divider)
-{
-	return DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ, (divider + 1) * 16);
-}
-
-static inline u16 freq_to_clock_divider(unsigned int freq,
-					unsigned int rollovers)
-{
-	return count_to_clock_divider(
-		   DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ, freq * rollovers));
-}
-
-static inline unsigned int clock_divider_to_freq(unsigned int divider,
-						 unsigned int rollovers)
-{
-	return DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ,
-				 (divider + 1) * rollovers);
-}
-
-/*
- * Low Pass Filter register calculations
- *
- * Note the largest count value of 0xffff corresponds to:
- * 	0xffff * 1000 / 108/2 MHz = 1,213,611.11... ns
- * which fits in 21 bits, so we'll use unsigned int for time arguments.
- */
-static inline u16 count_to_lpf_count(unsigned int d)
-{
-	if (d > FILTR_LPF)
-		d = FILTR_LPF;
-	else if (d < 4)
-		d = 0;
-	return (u16) d;
-}
-
-static inline u16 ns_to_lpf_count(unsigned int ns)
-{
-	return count_to_lpf_count(
-		DIV_ROUND_CLOSEST(CX25840_IR_REFCLK_FREQ / 1000000 * ns, 1000));
-}
-
-static inline unsigned int lpf_count_to_ns(unsigned int count)
-{
-	/* Duration of the Low Pass Filter rejection window in ns */
-	return DIV_ROUND_CLOSEST(count * 1000,
-				 CX25840_IR_REFCLK_FREQ / 1000000);
-}
-
-static inline unsigned int lpf_count_to_us(unsigned int count)
-{
-	/* Duration of the Low Pass Filter rejection window in us */
-	return DIV_ROUND_CLOSEST(count, CX25840_IR_REFCLK_FREQ / 1000000);
-}
-
-/*
- * FIFO register pulse width count compuations
- */
-static u32 clock_divider_to_resolution(u16 divider)
-{
-	/*
-	 * Resolution is the duration of 1 tick of the readable portion of
-	 * of the pulse width counter as read from the FIFO.  The two lsb's are
-	 * not readable, hence the << 2.  This function returns ns.
-	 */
-	return DIV_ROUND_CLOSEST((1 << 2)  * ((u32) divider + 1) * 1000,
-				 CX25840_IR_REFCLK_FREQ / 1000000);
-}
-
-static u64 pulse_width_count_to_ns(u16 count, u16 divider)
-{
-	u64 n;
-	u32 rem;
-
-	/*
-	 * The 2 lsb's of the pulse width timer count are not readable, hence
-	 * the (count << 2) | 0x3
-	 */
-	n = (((u64) count << 2) | 0x3) * (divider + 1) * 1000; /* millicycles */
-	rem = do_div(n, CX25840_IR_REFCLK_FREQ / 1000000);     /* / MHz => ns */
-	if (rem >= CX25840_IR_REFCLK_FREQ / 1000000 / 2)
-		n++;
-	return n;
-}
-
-#if 0
-/* Keep as we will need this for Transmit functionality */
-static u16 ns_to_pulse_width_count(u32 ns, u16 divider)
-{
-	u64 n;
-	u32 d;
-	u32 rem;
-
-	/*
-	 * The 2 lsb's of the pulse width timer count are not accessible, hence
-	 * the (1 << 2)
-	 */
-	n = ((u64) ns) * CX25840_IR_REFCLK_FREQ / 1000000; /* millicycles */
-	d = (1 << 2) * ((u32) divider + 1) * 1000; /* millicycles/count */
-	rem = do_div(n, d);
-	if (rem >= d / 2)
-		n++;
-
-	if (n > FIFO_RXTX)
-		n = FIFO_RXTX;
-	else if (n == 0)
-		n = 1;
-	return (u16) n;
-}
-
-#endif
-static unsigned int pulse_width_count_to_us(u16 count, u16 divider)
-{
-	u64 n;
-	u32 rem;
-
-	/*
-	 * The 2 lsb's of the pulse width timer count are not readable, hence
-	 * the (count << 2) | 0x3
-	 */
-	n = (((u64) count << 2) | 0x3) * (divider + 1);    /* cycles      */
-	rem = do_div(n, CX25840_IR_REFCLK_FREQ / 1000000); /* / MHz => us */
-	if (rem >= CX25840_IR_REFCLK_FREQ / 1000000 / 2)
-		n++;
-	return (unsigned int) n;
-}
-
-/*
- * Pulse Clocks computations: Combined Pulse Width Count & Rx Clock Counts
- *
- * The total pulse clock count is an 18 bit pulse width timer count as the most
- * significant part and (up to) 16 bit clock divider count as a modulus.
- * When the Rx clock divider ticks down to 0, it increments the 18 bit pulse
- * width timer count's least significant bit.
- */
-static u64 ns_to_pulse_clocks(u32 ns)
-{
-	u64 clocks;
-	u32 rem;
-	clocks = CX25840_IR_REFCLK_FREQ / 1000000 * (u64) ns; /* millicycles  */
-	rem = do_div(clocks, 1000);                         /* /1000 = cycles */
-	if (rem >= 1000 / 2)
-		clocks++;
-	return clocks;
-}
-
-static u16 pulse_clocks_to_clock_divider(u64 count)
-{
-	do_div(count, (FIFO_RXTX << 2) | 0x3);
-
-	/* net result needs to be rounded down and decremented by 1 */
-	if (count > RXCLK_RCD + 1)
-		count = RXCLK_RCD;
-	else if (count < 2)
-		count = 1;
-	else
-		count--;
-	return (u16) count;
-}
-
-/*
- * IR Control Register helpers
- */
-enum tx_fifo_watermark {
-	TX_FIFO_HALF_EMPTY = 0,
-	TX_FIFO_EMPTY      = CNTRL_TIC,
-};
-
-enum rx_fifo_watermark {
-	RX_FIFO_HALF_FULL = 0,
-	RX_FIFO_NOT_EMPTY = CNTRL_RIC,
-};
-
-static inline void control_tx_irq_watermark(struct i2c_client *c,
-					    enum tx_fifo_watermark level)
-{
-	cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_TIC, level);
-}
-
-static inline void control_rx_irq_watermark(struct i2c_client *c,
-					    enum rx_fifo_watermark level)
-{
-	cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_RIC, level);
-}
-
-static inline void control_tx_enable(struct i2c_client *c, bool enable)
-{
-	cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~(CNTRL_TXE | CNTRL_TFE),
-			enable ? (CNTRL_TXE | CNTRL_TFE) : 0);
-}
-
-static inline void control_rx_enable(struct i2c_client *c, bool enable)
-{
-	cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~(CNTRL_RXE | CNTRL_RFE),
-			enable ? (CNTRL_RXE | CNTRL_RFE) : 0);
-}
-
-static inline void control_tx_modulation_enable(struct i2c_client *c,
-						bool enable)
-{
-	cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_MOD,
-			enable ? CNTRL_MOD : 0);
-}
-
-static inline void control_rx_demodulation_enable(struct i2c_client *c,
-						  bool enable)
-{
-	cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_DMD,
-			enable ? CNTRL_DMD : 0);
-}
-
-static inline void control_rx_s_edge_detection(struct i2c_client *c,
-					       u32 edge_types)
-{
-	cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_EDG_BOTH,
-			edge_types & CNTRL_EDG_BOTH);
-}
-
-static void control_rx_s_carrier_window(struct i2c_client *c,
-					unsigned int carrier,
-					unsigned int *carrier_range_low,
-					unsigned int *carrier_range_high)
-{
-	u32 v;
-	unsigned int c16 = carrier * 16;
-
-	if (*carrier_range_low < DIV_ROUND_CLOSEST(c16, 16 + 3)) {
-		v = CNTRL_WIN_3_4;
-		*carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 4);
-	} else {
-		v = CNTRL_WIN_3_3;
-		*carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 3);
-	}
-
-	if (*carrier_range_high > DIV_ROUND_CLOSEST(c16, 16 - 3)) {
-		v |= CNTRL_WIN_4_3;
-		*carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 4);
-	} else {
-		v |= CNTRL_WIN_3_3;
-		*carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 3);
-	}
-	cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_WIN, v);
-}
-
-static inline void control_tx_polarity_invert(struct i2c_client *c,
-					      bool invert)
-{
-	cx25840_and_or4(c, CX25840_IR_CNTRL_REG, ~CNTRL_CPL,
-			invert ? CNTRL_CPL : 0);
-}
-
-/*
- * IR Rx & Tx Clock Register helpers
- */
-static unsigned int txclk_tx_s_carrier(struct i2c_client *c,
-				       unsigned int freq,
-				       u16 *divider)
-{
-	*divider = carrier_freq_to_clock_divider(freq);
-	cx25840_write4(c, CX25840_IR_TXCLK_REG, *divider);
-	return clock_divider_to_carrier_freq(*divider);
-}
-
-static unsigned int rxclk_rx_s_carrier(struct i2c_client *c,
-				       unsigned int freq,
-				       u16 *divider)
-{
-	*divider = carrier_freq_to_clock_divider(freq);
-	cx25840_write4(c, CX25840_IR_RXCLK_REG, *divider);
-	return clock_divider_to_carrier_freq(*divider);
-}
-
-static u32 txclk_tx_s_max_pulse_width(struct i2c_client *c, u32 ns,
-				      u16 *divider)
-{
-	u64 pulse_clocks;
-
-	if (ns > IR_MAX_DURATION)
-		ns = IR_MAX_DURATION;
-	pulse_clocks = ns_to_pulse_clocks(ns);
-	*divider = pulse_clocks_to_clock_divider(pulse_clocks);
-	cx25840_write4(c, CX25840_IR_TXCLK_REG, *divider);
-	return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider);
-}
-
-static u32 rxclk_rx_s_max_pulse_width(struct i2c_client *c, u32 ns,
-				      u16 *divider)
-{
-	u64 pulse_clocks;
-
-	if (ns > IR_MAX_DURATION)
-		ns = IR_MAX_DURATION;
-	pulse_clocks = ns_to_pulse_clocks(ns);
-	*divider = pulse_clocks_to_clock_divider(pulse_clocks);
-	cx25840_write4(c, CX25840_IR_RXCLK_REG, *divider);
-	return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider);
-}
-
-/*
- * IR Tx Carrier Duty Cycle register helpers
- */
-static unsigned int cduty_tx_s_duty_cycle(struct i2c_client *c,
-					  unsigned int duty_cycle)
-{
-	u32 n;
-	n = DIV_ROUND_CLOSEST(duty_cycle * 100, 625); /* 16ths of 100% */
-	if (n != 0)
-		n--;
-	if (n > 15)
-		n = 15;
-	cx25840_write4(c, CX25840_IR_CDUTY_REG, n);
-	return DIV_ROUND_CLOSEST((n + 1) * 100, 16);
-}
-
-/*
- * IR Filter Register helpers
- */
-static u32 filter_rx_s_min_width(struct i2c_client *c, u32 min_width_ns)
-{
-	u32 count = ns_to_lpf_count(min_width_ns);
-	cx25840_write4(c, CX25840_IR_FILTR_REG, count);
-	return lpf_count_to_ns(count);
-}
-
-/*
- * IR IRQ Enable Register helpers
- */
-static inline void irqenable_rx(struct v4l2_subdev *sd, u32 mask)
-{
-	struct cx25840_state *state = to_state(sd);
-
-	if (is_cx23885(state) || is_cx23887(state))
-		mask ^= IRQEN_MSK;
-	mask &= (IRQEN_RTE | IRQEN_ROE | IRQEN_RSE);
-	cx25840_and_or4(state->c, CX25840_IR_IRQEN_REG,
-			~(IRQEN_RTE | IRQEN_ROE | IRQEN_RSE), mask);
-}
-
-static inline void irqenable_tx(struct v4l2_subdev *sd, u32 mask)
-{
-	struct cx25840_state *state = to_state(sd);
-
-	if (is_cx23885(state) || is_cx23887(state))
-		mask ^= IRQEN_MSK;
-	mask &= IRQEN_TSE;
-	cx25840_and_or4(state->c, CX25840_IR_IRQEN_REG, ~IRQEN_TSE, mask);
-}
-
-/*
- * V4L2 Subdevice IR Ops
- */
-int cx25840_ir_irq_handler(struct v4l2_subdev *sd, u32 status, bool *handled)
-{
-	struct cx25840_state *state = to_state(sd);
-	struct cx25840_ir_state *ir_state = to_ir_state(sd);
-	struct i2c_client *c = NULL;
-	unsigned long flags;
-
-	union cx25840_ir_fifo_rec rx_data[FIFO_RX_DEPTH];
-	unsigned int i, j, k;
-	u32 events, v;
-	int tsr, rsr, rto, ror, tse, rse, rte, roe, kror;
-	u32 cntrl, irqen, stats;
-
-	*handled = false;
-	if (ir_state == NULL)
-		return -ENODEV;
-
-	c = ir_state->c;
-
-	/* Only support the IR controller for the CX2388[57] AV Core for now */
-	if (!(is_cx23885(state) || is_cx23887(state)))
-		return -ENODEV;
-
-	cntrl = cx25840_read4(c, CX25840_IR_CNTRL_REG);
-	irqen = cx25840_read4(c, CX25840_IR_IRQEN_REG);
-	if (is_cx23885(state) || is_cx23887(state))
-		irqen ^= IRQEN_MSK;
-	stats = cx25840_read4(c, CX25840_IR_STATS_REG);
-
-	tsr = stats & STATS_TSR; /* Tx FIFO Service Request */
-	rsr = stats & STATS_RSR; /* Rx FIFO Service Request */
-	rto = stats & STATS_RTO; /* Rx Pulse Width Timer Time Out */
-	ror = stats & STATS_ROR; /* Rx FIFO Over Run */
-
-	tse = irqen & IRQEN_TSE; /* Tx FIFO Service Request IRQ Enable */
-	rse = irqen & IRQEN_RSE; /* Rx FIFO Service Reuqest IRQ Enable */
-	rte = irqen & IRQEN_RTE; /* Rx Pulse Width Timer Time Out IRQ Enable */
-	roe = irqen & IRQEN_ROE; /* Rx FIFO Over Run IRQ Enable */
-
-	v4l2_dbg(2, ir_debug, sd, "IR IRQ Status:  %s %s %s %s %s %s\n",
-		 tsr ? "tsr" : "   ", rsr ? "rsr" : "   ",
-		 rto ? "rto" : "   ", ror ? "ror" : "   ",
-		 stats & STATS_TBY ? "tby" : "   ",
-		 stats & STATS_RBY ? "rby" : "   ");
-
-	v4l2_dbg(2, ir_debug, sd, "IR IRQ Enables: %s %s %s %s\n",
-		 tse ? "tse" : "   ", rse ? "rse" : "   ",
-		 rte ? "rte" : "   ", roe ? "roe" : "   ");
-
-	/*
-	 * Transmitter interrupt service
-	 */
-	if (tse && tsr) {
-		/*
-		 * TODO:
-		 * Check the watermark threshold setting
-		 * Pull FIFO_TX_DEPTH or FIFO_TX_DEPTH/2 entries from tx_kfifo
-		 * Push the data to the hardware FIFO.
-		 * If there was nothing more to send in the tx_kfifo, disable
-		 *	the TSR IRQ and notify the v4l2_device.
-		 * If there was something in the tx_kfifo, check the tx_kfifo
-		 *      level and notify the v4l2_device, if it is low.
-		 */
-		/* For now, inhibit TSR interrupt until Tx is implemented */
-		irqenable_tx(sd, 0);
-		events = V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ;
-		v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_TX_NOTIFY, &events);
-		*handled = true;
-	}
-
-	/*
-	 * Receiver interrupt service
-	 */
-	kror = 0;
-	if ((rse && rsr) || (rte && rto)) {
-		/*
-		 * Receive data on RSR to clear the STATS_RSR.
-		 * Receive data on RTO, since we may not have yet hit the RSR
-		 * watermark when we receive the RTO.
-		 */
-		for (i = 0, v = FIFO_RX_NDV;
-		     (v & FIFO_RX_NDV) && !kror; i = 0) {
-			for (j = 0;
-			     (v & FIFO_RX_NDV) && j < FIFO_RX_DEPTH; j++) {
-				v = cx25840_read4(c, CX25840_IR_FIFO_REG);
-				rx_data[i].hw_fifo_data = v & ~FIFO_RX_NDV;
-				i++;
-			}
-			if (i == 0)
-				break;
-			j = i * sizeof(union cx25840_ir_fifo_rec);
-			k = kfifo_in_locked(&ir_state->rx_kfifo,
-					    (unsigned char *) rx_data, j,
-					    &ir_state->rx_kfifo_lock);
-			if (k != j)
-				kror++; /* rx_kfifo over run */
-		}
-		*handled = true;
-	}
-
-	events = 0;
-	v = 0;
-	if (kror) {
-		events |= V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN;
-		v4l2_err(sd, "IR receiver software FIFO overrun\n");
-	}
-	if (roe && ror) {
-		/*
-		 * The RX FIFO Enable (CNTRL_RFE) must be toggled to clear
-		 * the Rx FIFO Over Run status (STATS_ROR)
-		 */
-		v |= CNTRL_RFE;
-		events |= V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN;
-		v4l2_err(sd, "IR receiver hardware FIFO overrun\n");
-	}
-	if (rte && rto) {
-		/*
-		 * The IR Receiver Enable (CNTRL_RXE) must be toggled to clear
-		 * the Rx Pulse Width Timer Time Out (STATS_RTO)
-		 */
-		v |= CNTRL_RXE;
-		events |= V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED;
-	}
-	if (v) {
-		/* Clear STATS_ROR & STATS_RTO as needed by reseting hardware */
-		cx25840_write4(c, CX25840_IR_CNTRL_REG, cntrl & ~v);
-		cx25840_write4(c, CX25840_IR_CNTRL_REG, cntrl);
-		*handled = true;
-	}
-	spin_lock_irqsave(&ir_state->rx_kfifo_lock, flags);
-	if (kfifo_len(&ir_state->rx_kfifo) >= CX25840_IR_RX_KFIFO_SIZE / 2)
-		events |= V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ;
-	spin_unlock_irqrestore(&ir_state->rx_kfifo_lock, flags);
-
-	if (events)
-		v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_RX_NOTIFY, &events);
-	return 0;
-}
-
-/* Receiver */
-static int cx25840_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count,
-			      ssize_t *num)
-{
-	struct cx25840_ir_state *ir_state = to_ir_state(sd);
-	bool invert;
-	u16 divider;
-	unsigned int i, n;
-	union cx25840_ir_fifo_rec *p;
-	unsigned u, v, w;
-
-	if (ir_state == NULL)
-		return -ENODEV;
-
-	invert = (bool) atomic_read(&ir_state->rx_invert);
-	divider = (u16) atomic_read(&ir_state->rxclk_divider);
-
-	n = count / sizeof(union cx25840_ir_fifo_rec)
-		* sizeof(union cx25840_ir_fifo_rec);
-	if (n == 0) {
-		*num = 0;
-		return 0;
-	}
-
-	n = kfifo_out_locked(&ir_state->rx_kfifo, buf, n,
-			     &ir_state->rx_kfifo_lock);
-
-	n /= sizeof(union cx25840_ir_fifo_rec);
-	*num = n * sizeof(union cx25840_ir_fifo_rec);
-
-	for (p = (union cx25840_ir_fifo_rec *) buf, i = 0; i < n; p++, i++) {
-
-		if ((p->hw_fifo_data & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
-			/* Assume RTO was because of no IR light input */
-			u = 0;
-			w = 1;
-		} else {
-			u = (p->hw_fifo_data & FIFO_RXTX_LVL) ? 1 : 0;
-			if (invert)
-				u = u ? 0 : 1;
-			w = 0;
-		}
-
-		v = (unsigned) pulse_width_count_to_ns(
-				  (u16) (p->hw_fifo_data & FIFO_RXTX), divider);
-		if (v > IR_MAX_DURATION)
-			v = IR_MAX_DURATION;
-
-		init_ir_raw_event(&p->ir_core_data);
-		p->ir_core_data.pulse = u;
-		p->ir_core_data.duration = v;
-		p->ir_core_data.timeout = w;
-
-		v4l2_dbg(2, ir_debug, sd, "rx read: %10u ns  %s  %s\n",
-			 v, u ? "mark" : "space", w ? "(timed out)" : "");
-		if (w)
-			v4l2_dbg(2, ir_debug, sd, "rx read: end of rx\n");
-	}
-	return 0;
-}
-
-static int cx25840_ir_rx_g_parameters(struct v4l2_subdev *sd,
-				      struct v4l2_subdev_ir_parameters *p)
-{
-	struct cx25840_ir_state *ir_state = to_ir_state(sd);
-
-	if (ir_state == NULL)
-		return -ENODEV;
-
-	mutex_lock(&ir_state->rx_params_lock);
-	memcpy(p, &ir_state->rx_params,
-				      sizeof(struct v4l2_subdev_ir_parameters));
-	mutex_unlock(&ir_state->rx_params_lock);
-	return 0;
-}
-
-static int cx25840_ir_rx_shutdown(struct v4l2_subdev *sd)
-{
-	struct cx25840_ir_state *ir_state = to_ir_state(sd);
-	struct i2c_client *c;
-
-	if (ir_state == NULL)
-		return -ENODEV;
-
-	c = ir_state->c;
-	mutex_lock(&ir_state->rx_params_lock);
-
-	/* Disable or slow down all IR Rx circuits and counters */
-	irqenable_rx(sd, 0);
-	control_rx_enable(c, false);
-	control_rx_demodulation_enable(c, false);
-	control_rx_s_edge_detection(c, CNTRL_EDG_NONE);
-	filter_rx_s_min_width(c, 0);
-	cx25840_write4(c, CX25840_IR_RXCLK_REG, RXCLK_RCD);
-
-	ir_state->rx_params.shutdown = true;
-
-	mutex_unlock(&ir_state->rx_params_lock);
-	return 0;
-}
-
-static int cx25840_ir_rx_s_parameters(struct v4l2_subdev *sd,
-				      struct v4l2_subdev_ir_parameters *p)
-{
-	struct cx25840_ir_state *ir_state = to_ir_state(sd);
-	struct i2c_client *c;
-	struct v4l2_subdev_ir_parameters *o;
-	u16 rxclk_divider;
-
-	if (ir_state == NULL)
-		return -ENODEV;
-
-	if (p->shutdown)
-		return cx25840_ir_rx_shutdown(sd);
-
-	if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH)
-		return -ENOSYS;
-
-	c = ir_state->c;
-	o = &ir_state->rx_params;
-
-	mutex_lock(&ir_state->rx_params_lock);
-
-	o->shutdown = p->shutdown;
-
-	p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
-	o->mode = p->mode;
-
-	p->bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec);
-	o->bytes_per_data_element = p->bytes_per_data_element;
-
-	/* Before we tweak the hardware, we have to disable the receiver */
-	irqenable_rx(sd, 0);
-	control_rx_enable(c, false);
-
-	control_rx_demodulation_enable(c, p->modulation);
-	o->modulation = p->modulation;
-
-	if (p->modulation) {
-		p->carrier_freq = rxclk_rx_s_carrier(c, p->carrier_freq,
-						     &rxclk_divider);
-
-		o->carrier_freq = p->carrier_freq;
-
-		p->duty_cycle = 50;
-		o->duty_cycle = p->duty_cycle;
-
-		control_rx_s_carrier_window(c, p->carrier_freq,
-					    &p->carrier_range_lower,
-					    &p->carrier_range_upper);
-		o->carrier_range_lower = p->carrier_range_lower;
-		o->carrier_range_upper = p->carrier_range_upper;
-
-		p->max_pulse_width =
-			(u32) pulse_width_count_to_ns(FIFO_RXTX, rxclk_divider);
-	} else {
-		p->max_pulse_width =
-			    rxclk_rx_s_max_pulse_width(c, p->max_pulse_width,
-						       &rxclk_divider);
-	}
-	o->max_pulse_width = p->max_pulse_width;
-	atomic_set(&ir_state->rxclk_divider, rxclk_divider);
-
-	p->noise_filter_min_width =
-			    filter_rx_s_min_width(c, p->noise_filter_min_width);
-	o->noise_filter_min_width = p->noise_filter_min_width;
-
-	p->resolution = clock_divider_to_resolution(rxclk_divider);
-	o->resolution = p->resolution;
-
-	/* FIXME - make this dependent on resolution for better performance */
-	control_rx_irq_watermark(c, RX_FIFO_HALF_FULL);
-
-	control_rx_s_edge_detection(c, CNTRL_EDG_BOTH);
-
-	o->invert_level = p->invert_level;
-	atomic_set(&ir_state->rx_invert, p->invert_level);
-
-	o->interrupt_enable = p->interrupt_enable;
-	o->enable = p->enable;
-	if (p->enable) {
-		unsigned long flags;
-
-		spin_lock_irqsave(&ir_state->rx_kfifo_lock, flags);
-		kfifo_reset(&ir_state->rx_kfifo);
-		spin_unlock_irqrestore(&ir_state->rx_kfifo_lock, flags);
-		if (p->interrupt_enable)
-			irqenable_rx(sd, IRQEN_RSE | IRQEN_RTE | IRQEN_ROE);
-		control_rx_enable(c, p->enable);
-	}
-
-	mutex_unlock(&ir_state->rx_params_lock);
-	return 0;
-}
-
-/* Transmitter */
-static int cx25840_ir_tx_write(struct v4l2_subdev *sd, u8 *buf, size_t count,
-			       ssize_t *num)
-{
-	struct cx25840_ir_state *ir_state = to_ir_state(sd);
-
-	if (ir_state == NULL)
-		return -ENODEV;
-
-#if 0
-	/*
-	 * FIXME - the code below is an incomplete and untested sketch of what
-	 * may need to be done.  The critical part is to get 4 (or 8) pulses
-	 * from the tx_kfifo, or converted from ns to the proper units from the
-	 * input, and push them off to the hardware Tx FIFO right away, if the
-	 * HW TX fifo needs service.  The rest can be pushed to the tx_kfifo in
-	 * a less critical timeframe.  Also watch out for overruning the
-	 * tx_kfifo - don't let it happen and let the caller know not all his
-	 * pulses were written.
-	 */
-	u32 *ns_pulse = (u32 *) buf;
-	unsigned int n;
-	u32 fifo_pulse[FIFO_TX_DEPTH];
-	u32 mark;
-
-	/* Compute how much we can fit in the tx kfifo */
-	n = CX25840_IR_TX_KFIFO_SIZE - kfifo_len(ir_state->tx_kfifo);
-	n = min(n, (unsigned int) count);
-	n /= sizeof(u32);
-
-	/* FIXME - turn on Tx Fifo service interrupt
-	 * check hardware fifo level, and other stuff
-	 */
-	for (i = 0; i < n; ) {
-		for (j = 0; j < FIFO_TX_DEPTH / 2 && i < n; j++) {
-			mark = ns_pulse[i] & LEVEL_MASK;
-			fifo_pulse[j] = ns_to_pulse_width_count(
-					 ns_pulse[i] &
-					       ~LEVEL_MASK,
-					 ir_state->txclk_divider);
-			if (mark)
-				fifo_pulse[j] &= FIFO_RXTX_LVL;
-			i++;
-		}
-		kfifo_put(ir_state->tx_kfifo, (u8 *) fifo_pulse,
-							       j * sizeof(u32));
-	}
-	*num = n * sizeof(u32);
-#else
-	/* For now enable the Tx FIFO Service interrupt & pretend we did work */
-	irqenable_tx(sd, IRQEN_TSE);
-	*num = count;
-#endif
-	return 0;
-}
-
-static int cx25840_ir_tx_g_parameters(struct v4l2_subdev *sd,
-				      struct v4l2_subdev_ir_parameters *p)
-{
-	struct cx25840_ir_state *ir_state = to_ir_state(sd);
-
-	if (ir_state == NULL)
-		return -ENODEV;
-
-	mutex_lock(&ir_state->tx_params_lock);
-	memcpy(p, &ir_state->tx_params,
-				      sizeof(struct v4l2_subdev_ir_parameters));
-	mutex_unlock(&ir_state->tx_params_lock);
-	return 0;
-}
-
-static int cx25840_ir_tx_shutdown(struct v4l2_subdev *sd)
-{
-	struct cx25840_ir_state *ir_state = to_ir_state(sd);
-	struct i2c_client *c;
-
-	if (ir_state == NULL)
-		return -ENODEV;
-
-	c = ir_state->c;
-	mutex_lock(&ir_state->tx_params_lock);
-
-	/* Disable or slow down all IR Tx circuits and counters */
-	irqenable_tx(sd, 0);
-	control_tx_enable(c, false);
-	control_tx_modulation_enable(c, false);
-	cx25840_write4(c, CX25840_IR_TXCLK_REG, TXCLK_TCD);
-
-	ir_state->tx_params.shutdown = true;
-
-	mutex_unlock(&ir_state->tx_params_lock);
-	return 0;
-}
-
-static int cx25840_ir_tx_s_parameters(struct v4l2_subdev *sd,
-				      struct v4l2_subdev_ir_parameters *p)
-{
-	struct cx25840_ir_state *ir_state = to_ir_state(sd);
-	struct i2c_client *c;
-	struct v4l2_subdev_ir_parameters *o;
-	u16 txclk_divider;
-
-	if (ir_state == NULL)
-		return -ENODEV;
-
-	if (p->shutdown)
-		return cx25840_ir_tx_shutdown(sd);
-
-	if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH)
-		return -ENOSYS;
-
-	c = ir_state->c;
-	o = &ir_state->tx_params;
-	mutex_lock(&ir_state->tx_params_lock);
-
-	o->shutdown = p->shutdown;
-
-	p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
-	o->mode = p->mode;
-
-	p->bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec);
-	o->bytes_per_data_element = p->bytes_per_data_element;
-
-	/* Before we tweak the hardware, we have to disable the transmitter */
-	irqenable_tx(sd, 0);
-	control_tx_enable(c, false);
-
-	control_tx_modulation_enable(c, p->modulation);
-	o->modulation = p->modulation;
-
-	if (p->modulation) {
-		p->carrier_freq = txclk_tx_s_carrier(c, p->carrier_freq,
-						     &txclk_divider);
-		o->carrier_freq = p->carrier_freq;
-
-		p->duty_cycle = cduty_tx_s_duty_cycle(c, p->duty_cycle);
-		o->duty_cycle = p->duty_cycle;
-
-		p->max_pulse_width =
-			(u32) pulse_width_count_to_ns(FIFO_RXTX, txclk_divider);
-	} else {
-		p->max_pulse_width =
-			    txclk_tx_s_max_pulse_width(c, p->max_pulse_width,
-						       &txclk_divider);
-	}
-	o->max_pulse_width = p->max_pulse_width;
-	atomic_set(&ir_state->txclk_divider, txclk_divider);
-
-	p->resolution = clock_divider_to_resolution(txclk_divider);
-	o->resolution = p->resolution;
-
-	/* FIXME - make this dependent on resolution for better performance */
-	control_tx_irq_watermark(c, TX_FIFO_HALF_EMPTY);
-
-	control_tx_polarity_invert(c, p->invert_carrier_sense);
-	o->invert_carrier_sense = p->invert_carrier_sense;
-
-	/*
-	 * FIXME: we don't have hardware help for IO pin level inversion
-	 * here like we have on the CX23888.
-	 * Act on this with some mix of logical inversion of data levels,
-	 * carrier polarity, and carrier duty cycle.
-	 */
-	o->invert_level = p->invert_level;
-
-	o->interrupt_enable = p->interrupt_enable;
-	o->enable = p->enable;
-	if (p->enable) {
-		/* reset tx_fifo here */
-		if (p->interrupt_enable)
-			irqenable_tx(sd, IRQEN_TSE);
-		control_tx_enable(c, p->enable);
-	}
-
-	mutex_unlock(&ir_state->tx_params_lock);
-	return 0;
-}
-
-
-/*
- * V4L2 Subdevice Core Ops support
- */
-int cx25840_ir_log_status(struct v4l2_subdev *sd)
-{
-	struct cx25840_state *state = to_state(sd);
-	struct i2c_client *c = state->c;
-	char *s;
-	int i, j;
-	u32 cntrl, txclk, rxclk, cduty, stats, irqen, filtr;
-
-	/* The CX23888 chip doesn't have an IR controller on the A/V core */
-	if (is_cx23888(state))
-		return 0;
-
-	cntrl = cx25840_read4(c, CX25840_IR_CNTRL_REG);
-	txclk = cx25840_read4(c, CX25840_IR_TXCLK_REG) & TXCLK_TCD;
-	rxclk = cx25840_read4(c, CX25840_IR_RXCLK_REG) & RXCLK_RCD;
-	cduty = cx25840_read4(c, CX25840_IR_CDUTY_REG) & CDUTY_CDC;
-	stats = cx25840_read4(c, CX25840_IR_STATS_REG);
-	irqen = cx25840_read4(c, CX25840_IR_IRQEN_REG);
-	if (is_cx23885(state) || is_cx23887(state))
-		irqen ^= IRQEN_MSK;
-	filtr = cx25840_read4(c, CX25840_IR_FILTR_REG) & FILTR_LPF;
-
-	v4l2_info(sd, "IR Receiver:\n");
-	v4l2_info(sd, "\tEnabled:                           %s\n",
-		  cntrl & CNTRL_RXE ? "yes" : "no");
-	v4l2_info(sd, "\tDemodulation from a carrier:       %s\n",
-		  cntrl & CNTRL_DMD ? "enabled" : "disabled");
-	v4l2_info(sd, "\tFIFO:                              %s\n",
-		  cntrl & CNTRL_RFE ? "enabled" : "disabled");
-	switch (cntrl & CNTRL_EDG) {
-	case CNTRL_EDG_NONE:
-		s = "disabled";
-		break;
-	case CNTRL_EDG_FALL:
-		s = "falling edge";
-		break;
-	case CNTRL_EDG_RISE:
-		s = "rising edge";
-		break;
-	case CNTRL_EDG_BOTH:
-		s = "rising & falling edges";
-		break;
-	default:
-		s = "??? edge";
-		break;
-	}
-	v4l2_info(sd, "\tPulse timers' start/stop trigger:  %s\n", s);
-	v4l2_info(sd, "\tFIFO data on pulse timer overflow: %s\n",
-		  cntrl & CNTRL_R ? "not loaded" : "overflow marker");
-	v4l2_info(sd, "\tFIFO interrupt watermark:          %s\n",
-		  cntrl & CNTRL_RIC ? "not empty" : "half full or greater");
-	v4l2_info(sd, "\tLoopback mode:                     %s\n",
-		  cntrl & CNTRL_LBM ? "loopback active" : "normal receive");
-	if (cntrl & CNTRL_DMD) {
-		v4l2_info(sd, "\tExpected carrier (16 clocks):      %u Hz\n",
-			  clock_divider_to_carrier_freq(rxclk));
-		switch (cntrl & CNTRL_WIN) {
-		case CNTRL_WIN_3_3:
-			i = 3;
-			j = 3;
-			break;
-		case CNTRL_WIN_4_3:
-			i = 4;
-			j = 3;
-			break;
-		case CNTRL_WIN_3_4:
-			i = 3;
-			j = 4;
-			break;
-		case CNTRL_WIN_4_4:
-			i = 4;
-			j = 4;
-			break;
-		default:
-			i = 0;
-			j = 0;
-			break;
-		}
-		v4l2_info(sd, "\tNext carrier edge window:          16 clocks "
-			  "-%1d/+%1d, %u to %u Hz\n", i, j,
-			  clock_divider_to_freq(rxclk, 16 + j),
-			  clock_divider_to_freq(rxclk, 16 - i));
-	}
-	v4l2_info(sd, "\tMax measurable pulse width:        %u us, %llu ns\n",
-		  pulse_width_count_to_us(FIFO_RXTX, rxclk),
-		  pulse_width_count_to_ns(FIFO_RXTX, rxclk));
-	v4l2_info(sd, "\tLow pass filter:                   %s\n",
-		  filtr ? "enabled" : "disabled");
-	if (filtr)
-		v4l2_info(sd, "\tMin acceptable pulse width (LPF):  %u us, "
-			  "%u ns\n",
-			  lpf_count_to_us(filtr),
-			  lpf_count_to_ns(filtr));
-	v4l2_info(sd, "\tPulse width timer timed-out:       %s\n",
-		  stats & STATS_RTO ? "yes" : "no");
-	v4l2_info(sd, "\tPulse width timer time-out intr:   %s\n",
-		  irqen & IRQEN_RTE ? "enabled" : "disabled");
-	v4l2_info(sd, "\tFIFO overrun:                      %s\n",
-		  stats & STATS_ROR ? "yes" : "no");
-	v4l2_info(sd, "\tFIFO overrun interrupt:            %s\n",
-		  irqen & IRQEN_ROE ? "enabled" : "disabled");
-	v4l2_info(sd, "\tBusy:                              %s\n",
-		  stats & STATS_RBY ? "yes" : "no");
-	v4l2_info(sd, "\tFIFO service requested:            %s\n",
-		  stats & STATS_RSR ? "yes" : "no");
-	v4l2_info(sd, "\tFIFO service request interrupt:    %s\n",
-		  irqen & IRQEN_RSE ? "enabled" : "disabled");
-
-	v4l2_info(sd, "IR Transmitter:\n");
-	v4l2_info(sd, "\tEnabled:                           %s\n",
-		  cntrl & CNTRL_TXE ? "yes" : "no");
-	v4l2_info(sd, "\tModulation onto a carrier:         %s\n",
-		  cntrl & CNTRL_MOD ? "enabled" : "disabled");
-	v4l2_info(sd, "\tFIFO:                              %s\n",
-		  cntrl & CNTRL_TFE ? "enabled" : "disabled");
-	v4l2_info(sd, "\tFIFO interrupt watermark:          %s\n",
-		  cntrl & CNTRL_TIC ? "not empty" : "half full or less");
-	v4l2_info(sd, "\tCarrier polarity:                  %s\n",
-		  cntrl & CNTRL_CPL ? "space:burst mark:noburst"
-				    : "space:noburst mark:burst");
-	if (cntrl & CNTRL_MOD) {
-		v4l2_info(sd, "\tCarrier (16 clocks):               %u Hz\n",
-			  clock_divider_to_carrier_freq(txclk));
-		v4l2_info(sd, "\tCarrier duty cycle:                %2u/16\n",
-			  cduty + 1);
-	}
-	v4l2_info(sd, "\tMax pulse width:                   %u us, %llu ns\n",
-		  pulse_width_count_to_us(FIFO_RXTX, txclk),
-		  pulse_width_count_to_ns(FIFO_RXTX, txclk));
-	v4l2_info(sd, "\tBusy:                              %s\n",
-		  stats & STATS_TBY ? "yes" : "no");
-	v4l2_info(sd, "\tFIFO service requested:            %s\n",
-		  stats & STATS_TSR ? "yes" : "no");
-	v4l2_info(sd, "\tFIFO service request interrupt:    %s\n",
-		  irqen & IRQEN_TSE ? "enabled" : "disabled");
-
-	return 0;
-}
-
-
-const struct v4l2_subdev_ir_ops cx25840_ir_ops = {
-	.rx_read = cx25840_ir_rx_read,
-	.rx_g_parameters = cx25840_ir_rx_g_parameters,
-	.rx_s_parameters = cx25840_ir_rx_s_parameters,
-
-	.tx_write = cx25840_ir_tx_write,
-	.tx_g_parameters = cx25840_ir_tx_g_parameters,
-	.tx_s_parameters = cx25840_ir_tx_s_parameters,
-};
-
-
-static const struct v4l2_subdev_ir_parameters default_rx_params = {
-	.bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec),
-	.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
-
-	.enable = false,
-	.interrupt_enable = false,
-	.shutdown = true,
-
-	.modulation = true,
-	.carrier_freq = 36000, /* 36 kHz - RC-5, and RC-6 carrier */
-
-	/* RC-5: 666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */
-	/* RC-6: 333,333 ns = 1/36 kHz * 16 cycles * 1 mark * 0.75 */
-	.noise_filter_min_width = 333333, /* ns */
-	.carrier_range_lower = 35000,
-	.carrier_range_upper = 37000,
-	.invert_level = false,
-};
-
-static const struct v4l2_subdev_ir_parameters default_tx_params = {
-	.bytes_per_data_element = sizeof(union cx25840_ir_fifo_rec),
-	.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
-
-	.enable = false,
-	.interrupt_enable = false,
-	.shutdown = true,
-
-	.modulation = true,
-	.carrier_freq = 36000, /* 36 kHz - RC-5 carrier */
-	.duty_cycle = 25,      /* 25 %   - RC-5 carrier */
-	.invert_level = false,
-	.invert_carrier_sense = false,
-};
-
-int cx25840_ir_probe(struct v4l2_subdev *sd)
-{
-	struct cx25840_state *state = to_state(sd);
-	struct cx25840_ir_state *ir_state;
-	struct v4l2_subdev_ir_parameters default_params;
-
-	/* Only init the IR controller for the CX2388[57] AV Core for now */
-	if (!(is_cx23885(state) || is_cx23887(state)))
-		return 0;
-
-	ir_state = kzalloc(sizeof(struct cx25840_ir_state), GFP_KERNEL);
-	if (ir_state == NULL)
-		return -ENOMEM;
-
-	spin_lock_init(&ir_state->rx_kfifo_lock);
-	if (kfifo_alloc(&ir_state->rx_kfifo,
-			CX25840_IR_RX_KFIFO_SIZE, GFP_KERNEL)) {
-		kfree(ir_state);
-		return -ENOMEM;
-	}
-
-	ir_state->c = state->c;
-	state->ir_state = ir_state;
-
-	/* Ensure no interrupts arrive yet */
-	if (is_cx23885(state) || is_cx23887(state))
-		cx25840_write4(ir_state->c, CX25840_IR_IRQEN_REG, IRQEN_MSK);
-	else
-		cx25840_write4(ir_state->c, CX25840_IR_IRQEN_REG, 0);
-
-	mutex_init(&ir_state->rx_params_lock);
-	memcpy(&default_params, &default_rx_params,
-		       sizeof(struct v4l2_subdev_ir_parameters));
-	v4l2_subdev_call(sd, ir, rx_s_parameters, &default_params);
-
-	mutex_init(&ir_state->tx_params_lock);
-	memcpy(&default_params, &default_tx_params,
-		       sizeof(struct v4l2_subdev_ir_parameters));
-	v4l2_subdev_call(sd, ir, tx_s_parameters, &default_params);
-
-	return 0;
-}
-
-int cx25840_ir_remove(struct v4l2_subdev *sd)
-{
-	struct cx25840_state *state = to_state(sd);
-	struct cx25840_ir_state *ir_state = to_ir_state(sd);
-
-	if (ir_state == NULL)
-		return -ENODEV;
-
-	cx25840_ir_rx_shutdown(sd);
-	cx25840_ir_tx_shutdown(sd);
-
-	kfifo_free(&ir_state->rx_kfifo);
-	kfree(ir_state);
-	state->ir_state = NULL;
-	return 0;
-}
diff --git a/drivers/media/video/cx25840/cx25840-vbi.c b/drivers/media/video/cx25840/cx25840-vbi.c
deleted file mode 100644
index 64a4004..0000000
--- a/drivers/media/video/cx25840/cx25840-vbi.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/* cx25840 VBI functions
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-
-#include <linux/videodev2.h>
-#include <linux/i2c.h>
-#include <media/v4l2-common.h>
-#include <media/cx25840.h>
-
-#include "cx25840-core.h"
-
-static int odd_parity(u8 c)
-{
-	c ^= (c >> 4);
-	c ^= (c >> 2);
-	c ^= (c >> 1);
-
-	return c & 1;
-}
-
-static int decode_vps(u8 * dst, u8 * p)
-{
-	static const u8 biphase_tbl[] = {
-		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
-		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
-		0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96,
-		0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2,
-		0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94,
-		0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0,
-		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
-		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
-		0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5,
-		0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1,
-		0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87,
-		0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3,
-		0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85,
-		0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1,
-		0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5,
-		0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1,
-		0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4,
-		0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0,
-		0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86,
-		0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2,
-		0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84,
-		0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0,
-		0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4,
-		0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0,
-		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
-		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
-		0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96,
-		0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2,
-		0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94,
-		0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0,
-		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
-		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
-	};
-
-	u8 c, err = 0;
-	int i;
-
-	for (i = 0; i < 2 * 13; i += 2) {
-		err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]];
-		c = (biphase_tbl[p[i + 1]] & 0xf) |
-		    ((biphase_tbl[p[i]] & 0xf) << 4);
-		dst[i / 2] = c;
-	}
-
-	return err & 0xf0;
-}
-
-int cx25840_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct cx25840_state *state = to_state(sd);
-	static const u16 lcr2vbi[] = {
-		0, V4L2_SLICED_TELETEXT_B, 0,	/* 1 */
-		0, V4L2_SLICED_WSS_625, 0,	/* 4 */
-		V4L2_SLICED_CAPTION_525,	/* 6 */
-		0, 0, V4L2_SLICED_VPS, 0, 0,	/* 9 */
-		0, 0, 0, 0
-	};
-	int is_pal = !(state->std & V4L2_STD_525_60);
-	int i;
-
-	memset(svbi, 0, sizeof(*svbi));
-	/* we're done if raw VBI is active */
-	if ((cx25840_read(client, 0x404) & 0x10) == 0)
-		return 0;
-
-	if (is_pal) {
-		for (i = 7; i <= 23; i++) {
-			u8 v = cx25840_read(client, 0x424 + i - 7);
-
-			svbi->service_lines[0][i] = lcr2vbi[v >> 4];
-			svbi->service_lines[1][i] = lcr2vbi[v & 0xf];
-			svbi->service_set |= svbi->service_lines[0][i] |
-					     svbi->service_lines[1][i];
-		}
-	} else {
-		for (i = 10; i <= 21; i++) {
-			u8 v = cx25840_read(client, 0x424 + i - 10);
-
-			svbi->service_lines[0][i] = lcr2vbi[v >> 4];
-			svbi->service_lines[1][i] = lcr2vbi[v & 0xf];
-			svbi->service_set |= svbi->service_lines[0][i] |
-					     svbi->service_lines[1][i];
-		}
-	}
-	return 0;
-}
-
-int cx25840_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct cx25840_state *state = to_state(sd);
-	int is_pal = !(state->std & V4L2_STD_525_60);
-	int vbi_offset = is_pal ? 1 : 0;
-
-	/* Setup standard */
-	cx25840_std_setup(client);
-
-	/* VBI Offset */
-	cx25840_write(client, 0x47f, vbi_offset);
-	cx25840_write(client, 0x404, 0x2e);
-	return 0;
-}
-
-int cx25840_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct cx25840_state *state = to_state(sd);
-	int is_pal = !(state->std & V4L2_STD_525_60);
-	int vbi_offset = is_pal ? 1 : 0;
-	int i, x;
-	u8 lcr[24];
-
-	for (x = 0; x <= 23; x++)
-		lcr[x] = 0x00;
-
-	/* Setup standard */
-	cx25840_std_setup(client);
-
-	/* Sliced VBI */
-	cx25840_write(client, 0x404, 0x32);	/* Ancillary data */
-	cx25840_write(client, 0x406, 0x13);
-	cx25840_write(client, 0x47f, vbi_offset);
-
-	if (is_pal) {
-		for (i = 0; i <= 6; i++)
-			svbi->service_lines[0][i] =
-				svbi->service_lines[1][i] = 0;
-	} else {
-		for (i = 0; i <= 9; i++)
-			svbi->service_lines[0][i] =
-				svbi->service_lines[1][i] = 0;
-
-		for (i = 22; i <= 23; i++)
-			svbi->service_lines[0][i] =
-				svbi->service_lines[1][i] = 0;
-	}
-
-	for (i = 7; i <= 23; i++) {
-		for (x = 0; x <= 1; x++) {
-			switch (svbi->service_lines[1-x][i]) {
-			case V4L2_SLICED_TELETEXT_B:
-				lcr[i] |= 1 << (4 * x);
-				break;
-			case V4L2_SLICED_WSS_625:
-				lcr[i] |= 4 << (4 * x);
-				break;
-			case V4L2_SLICED_CAPTION_525:
-				lcr[i] |= 6 << (4 * x);
-				break;
-			case V4L2_SLICED_VPS:
-				lcr[i] |= 9 << (4 * x);
-				break;
-			}
-		}
-	}
-
-	if (is_pal) {
-		for (x = 1, i = 0x424; i <= 0x434; i++, x++)
-			cx25840_write(client, i, lcr[6 + x]);
-	} else {
-		for (x = 1, i = 0x424; i <= 0x430; i++, x++)
-			cx25840_write(client, i, lcr[9 + x]);
-		for (i = 0x431; i <= 0x434; i++)
-			cx25840_write(client, i, 0);
-	}
-
-	cx25840_write(client, 0x43c, 0x16);
-	cx25840_write(client, 0x474, is_pal ? 0x2a : 0x22);
-	return 0;
-}
-
-int cx25840_decode_vbi_line(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi)
-{
-	struct cx25840_state *state = to_state(sd);
-	u8 *p = vbi->p;
-	int id1, id2, l, err = 0;
-
-	if (p[0] || p[1] != 0xff || p[2] != 0xff ||
-			(p[3] != 0x55 && p[3] != 0x91)) {
-		vbi->line = vbi->type = 0;
-		return 0;
-	}
-
-	p += 4;
-	id1 = p[-1];
-	id2 = p[0] & 0xf;
-	l = p[2] & 0x3f;
-	l += state->vbi_line_offset;
-	p += 4;
-
-	switch (id2) {
-	case 1:
-		id2 = V4L2_SLICED_TELETEXT_B;
-		break;
-	case 4:
-		id2 = V4L2_SLICED_WSS_625;
-		break;
-	case 6:
-		id2 = V4L2_SLICED_CAPTION_525;
-		err = !odd_parity(p[0]) || !odd_parity(p[1]);
-		break;
-	case 9:
-		id2 = V4L2_SLICED_VPS;
-		if (decode_vps(p, p) != 0)
-			err = 1;
-		break;
-	default:
-		id2 = 0;
-		err = 1;
-		break;
-	}
-
-	vbi->type = err ? 0 : id2;
-	vbi->line = err ? 0 : l;
-	vbi->is_second_field = err ? 0 : (id1 == 0x55);
-	vbi->p = p;
-	return 0;
-}
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
deleted file mode 100644
index 04f192a..0000000
--- a/drivers/media/video/ir-kbd-i2c.c
+++ /dev/null
@@ -1,489 +0,0 @@
-/*
- *
- * keyboard input driver for i2c IR remote controls
- *
- * Copyright (c) 2000-2003 Gerd Knorr <kraxel@bytesex.org>
- * modified for PixelView (BT878P+W/FM) by
- *      Michal Kochanowicz <mkochano@pld.org.pl>
- *      Christoph Bartelmus <lirc@bartelmus.de>
- * modified for KNC ONE TV Station/Anubis Typhoon TView Tuner by
- *      Ulrich Mueller <ulrich.mueller42@web.de>
- * modified for em2820 based USB TV tuners by
- *      Markus Rechberger <mrechberger@gmail.com>
- * modified for DViCO Fusion HDTV 5 RT GOLD by
- *      Chaogui Zhang <czhang1974@gmail.com>
- * modified for MSI TV@nywhere Plus by
- *      Henry Wong <henry@stuffedcow.net>
- *      Mark Schultz <n9xmj@yahoo.com>
- *      Brian Rogers <brian_rogers@comcast.net>
- * modified for AVerMedia Cardbus by
- *      Oldrich Jedlicka <oldium.pro@seznam.cz>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/workqueue.h>
-
-#include <media/rc-core.h>
-#include <media/ir-kbd-i2c.h>
-
-/* ----------------------------------------------------------------------- */
-/* insmod parameters                                                       */
-
-static int debug;
-module_param(debug, int, 0644);    /* debug level (0,1,2) */
-
-
-#define MODULE_NAME "ir-kbd-i2c"
-#define dprintk(level, fmt, arg...)	if (debug >= level) \
-	printk(KERN_DEBUG MODULE_NAME ": " fmt , ## arg)
-
-/* ----------------------------------------------------------------------- */
-
-static int get_key_haup_common(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw,
-			       int size, int offset)
-{
-	unsigned char buf[6];
-	int start, range, toggle, dev, code, ircode;
-
-	/* poll IR chip */
-	if (size != i2c_master_recv(ir->c, buf, size))
-		return -EIO;
-
-	/* split rc5 data block ... */
-	start  = (buf[offset] >> 7) &    1;
-	range  = (buf[offset] >> 6) &    1;
-	toggle = (buf[offset] >> 5) &    1;
-	dev    =  buf[offset]       & 0x1f;
-	code   = (buf[offset+1] >> 2) & 0x3f;
-
-	/* rc5 has two start bits
-	 * the first bit must be one
-	 * the second bit defines the command range (1 = 0-63, 0 = 64 - 127)
-	 */
-	if (!start)
-		/* no key pressed */
-		return 0;
-	/*
-	 * Hauppauge remotes (black/silver) always use
-	 * specific device ids. If we do not filter the
-	 * device ids then messages destined for devices
-	 * such as TVs (id=0) will get through causing
-	 * mis-fired events.
-	 *
-	 * We also filter out invalid key presses which
-	 * produce annoying debug log entries.
-	 */
-	ircode= (start << 12) | (toggle << 11) | (dev << 6) | code;
-	if ((ircode & 0x1fff)==0x1fff)
-		/* invalid key press */
-		return 0;
-
-	if (!range)
-		code += 64;
-
-	dprintk(1,"ir hauppauge (rc5): s%d r%d t%d dev=%d code=%d\n",
-		start, range, toggle, dev, code);
-
-	/* return key */
-	*ir_key = (dev << 8) | code;
-	*ir_raw = ircode;
-	return 1;
-}
-
-static int get_key_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
-{
-	return get_key_haup_common (ir, ir_key, ir_raw, 3, 0);
-}
-
-static int get_key_haup_xvr(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
-{
-	int ret;
-	unsigned char buf[1] = { 0 };
-
-	/*
-	 * This is the same apparent "are you ready?" poll command observed
-	 * watching Windows driver traffic and implemented in lirc_zilog. With
-	 * this added, we get far saner remote behavior with z8 chips on usb
-	 * connected devices, even with the default polling interval of 100ms.
-	 */
-	ret = i2c_master_send(ir->c, buf, 1);
-	if (ret != 1)
-		return (ret < 0) ? ret : -EINVAL;
-
-	return get_key_haup_common (ir, ir_key, ir_raw, 6, 3);
-}
-
-static int get_key_pixelview(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
-{
-	unsigned char b;
-
-	/* poll IR chip */
-	if (1 != i2c_master_recv(ir->c, &b, 1)) {
-		dprintk(1,"read error\n");
-		return -EIO;
-	}
-	*ir_key = b;
-	*ir_raw = b;
-	return 1;
-}
-
-static int get_key_fusionhdtv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
-{
-	unsigned char buf[4];
-
-	/* poll IR chip */
-	if (4 != i2c_master_recv(ir->c, buf, 4)) {
-		dprintk(1,"read error\n");
-		return -EIO;
-	}
-
-	if(buf[0] !=0 || buf[1] !=0 || buf[2] !=0 || buf[3] != 0)
-		dprintk(2, "%s: 0x%2x 0x%2x 0x%2x 0x%2x\n", __func__,
-			buf[0], buf[1], buf[2], buf[3]);
-
-	/* no key pressed or signal from other ir remote */
-	if(buf[0] != 0x1 ||  buf[1] != 0xfe)
-		return 0;
-
-	*ir_key = buf[2];
-	*ir_raw = (buf[2] << 8) | buf[3];
-
-	return 1;
-}
-
-static int get_key_knc1(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
-{
-	unsigned char b;
-
-	/* poll IR chip */
-	if (1 != i2c_master_recv(ir->c, &b, 1)) {
-		dprintk(1,"read error\n");
-		return -EIO;
-	}
-
-	/* it seems that 0xFE indicates that a button is still hold
-	   down, while 0xff indicates that no button is hold
-	   down. 0xfe sequences are sometimes interrupted by 0xFF */
-
-	dprintk(2,"key %02x\n", b);
-
-	if (b == 0xff)
-		return 0;
-
-	if (b == 0xfe)
-		/* keep old data */
-		return 1;
-
-	*ir_key = b;
-	*ir_raw = b;
-	return 1;
-}
-
-static int get_key_avermedia_cardbus(struct IR_i2c *ir,
-				     u32 *ir_key, u32 *ir_raw)
-{
-	unsigned char subaddr, key, keygroup;
-	struct i2c_msg msg[] = { { .addr = ir->c->addr, .flags = 0,
-				   .buf = &subaddr, .len = 1},
-				 { .addr = ir->c->addr, .flags = I2C_M_RD,
-				  .buf = &key, .len = 1} };
-	subaddr = 0x0d;
-	if (2 != i2c_transfer(ir->c->adapter, msg, 2)) {
-		dprintk(1, "read error\n");
-		return -EIO;
-	}
-
-	if (key == 0xff)
-		return 0;
-
-	subaddr = 0x0b;
-	msg[1].buf = &keygroup;
-	if (2 != i2c_transfer(ir->c->adapter, msg, 2)) {
-		dprintk(1, "read error\n");
-		return -EIO;
-	}
-
-	if (keygroup == 0xff)
-		return 0;
-
-	dprintk(1, "read key 0x%02x/0x%02x\n", key, keygroup);
-	if (keygroup < 2 || keygroup > 3) {
-		/* Only a warning */
-		dprintk(1, "warning: invalid key group 0x%02x for key 0x%02x\n",
-								keygroup, key);
-	}
-	key |= (keygroup & 1) << 6;
-
-	*ir_key = key;
-	*ir_raw = key;
-	return 1;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int ir_key_poll(struct IR_i2c *ir)
-{
-	static u32 ir_key, ir_raw;
-	int rc;
-
-	dprintk(3, "%s\n", __func__);
-	rc = ir->get_key(ir, &ir_key, &ir_raw);
-	if (rc < 0) {
-		dprintk(2,"error\n");
-		return rc;
-	}
-
-	if (rc) {
-		dprintk(1, "%s: keycode = 0x%04x\n", __func__, ir_key);
-		rc_keydown(ir->rc, ir_key, 0);
-	}
-	return 0;
-}
-
-static void ir_work(struct work_struct *work)
-{
-	int rc;
-	struct IR_i2c *ir = container_of(work, struct IR_i2c, work.work);
-
-	rc = ir_key_poll(ir);
-	if (rc == -ENODEV) {
-		rc_unregister_device(ir->rc);
-		ir->rc = NULL;
-		return;
-	}
-
-	schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling_interval));
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
-{
-	char *ir_codes = NULL;
-	const char *name = NULL;
-	u64 rc_type = RC_TYPE_UNKNOWN;
-	struct IR_i2c *ir;
-	struct rc_dev *rc = NULL;
-	struct i2c_adapter *adap = client->adapter;
-	unsigned short addr = client->addr;
-	int err;
-
-	ir = kzalloc(sizeof(struct IR_i2c), GFP_KERNEL);
-	if (!ir)
-		return -ENOMEM;
-
-	ir->c = client;
-	ir->polling_interval = DEFAULT_POLLING_INTERVAL;
-	i2c_set_clientdata(client, ir);
-
-	switch(addr) {
-	case 0x64:
-		name        = "Pixelview";
-		ir->get_key = get_key_pixelview;
-		rc_type     = RC_TYPE_OTHER;
-		ir_codes    = RC_MAP_EMPTY;
-		break;
-	case 0x18:
-	case 0x1f:
-	case 0x1a:
-		name        = "Hauppauge";
-		ir->get_key = get_key_haup;
-		rc_type     = RC_TYPE_RC5;
-		ir_codes    = RC_MAP_HAUPPAUGE;
-		break;
-	case 0x30:
-		name        = "KNC One";
-		ir->get_key = get_key_knc1;
-		rc_type     = RC_TYPE_OTHER;
-		ir_codes    = RC_MAP_EMPTY;
-		break;
-	case 0x6b:
-		name        = "FusionHDTV";
-		ir->get_key = get_key_fusionhdtv;
-		rc_type     = RC_TYPE_RC5;
-		ir_codes    = RC_MAP_FUSIONHDTV_MCE;
-		break;
-	case 0x40:
-		name        = "AVerMedia Cardbus remote";
-		ir->get_key = get_key_avermedia_cardbus;
-		rc_type     = RC_TYPE_OTHER;
-		ir_codes    = RC_MAP_AVERMEDIA_CARDBUS;
-		break;
-	case 0x71:
-		name        = "Hauppauge/Zilog Z8";
-		ir->get_key = get_key_haup_xvr;
-		rc_type     = RC_TYPE_RC5;
-		ir_codes    = RC_MAP_HAUPPAUGE;
-		break;
-	}
-
-	/* Let the caller override settings */
-	if (client->dev.platform_data) {
-		const struct IR_i2c_init_data *init_data =
-						client->dev.platform_data;
-
-		ir_codes = init_data->ir_codes;
-		rc = init_data->rc_dev;
-
-		name = init_data->name;
-		if (init_data->type)
-			rc_type = init_data->type;
-
-		if (init_data->polling_interval)
-			ir->polling_interval = init_data->polling_interval;
-
-		switch (init_data->internal_get_key_func) {
-		case IR_KBD_GET_KEY_CUSTOM:
-			/* The bridge driver provided us its own function */
-			ir->get_key = init_data->get_key;
-			break;
-		case IR_KBD_GET_KEY_PIXELVIEW:
-			ir->get_key = get_key_pixelview;
-			break;
-		case IR_KBD_GET_KEY_HAUP:
-			ir->get_key = get_key_haup;
-			break;
-		case IR_KBD_GET_KEY_KNC1:
-			ir->get_key = get_key_knc1;
-			break;
-		case IR_KBD_GET_KEY_FUSIONHDTV:
-			ir->get_key = get_key_fusionhdtv;
-			break;
-		case IR_KBD_GET_KEY_HAUP_XVR:
-			ir->get_key = get_key_haup_xvr;
-			break;
-		case IR_KBD_GET_KEY_AVERMEDIA_CARDBUS:
-			ir->get_key = get_key_avermedia_cardbus;
-			break;
-		}
-	}
-
-	if (!rc) {
-		/*
-		 * If platform_data doesn't specify rc_dev, initilize it
-		 * internally
-		 */
-		rc = rc_allocate_device();
-		if (!rc) {
-			err = -ENOMEM;
-			goto err_out_free;
-		}
-	}
-	ir->rc = rc;
-
-	/* Make sure we are all setup before going on */
-	if (!name || !ir->get_key || !rc_type || !ir_codes) {
-		dprintk(1, ": Unsupported device at address 0x%02x\n",
-			addr);
-		err = -ENODEV;
-		goto err_out_free;
-	}
-
-	/* Sets name */
-	snprintf(ir->name, sizeof(ir->name), "i2c IR (%s)", name);
-	ir->ir_codes = ir_codes;
-
-	snprintf(ir->phys, sizeof(ir->phys), "%s/%s/ir0",
-		 dev_name(&adap->dev),
-		 dev_name(&client->dev));
-
-	/*
-	 * Initialize input_dev fields
-	 * It doesn't make sense to allow overriding them via platform_data
-	 */
-	rc->input_id.bustype = BUS_I2C;
-	rc->input_phys       = ir->phys;
-	rc->input_name	     = ir->name;
-
-	/*
-	 * Initialize the other fields of rc_dev
-	 */
-	rc->map_name       = ir->ir_codes;
-	rc->allowed_protos = rc_type;
-	if (!rc->driver_name)
-		rc->driver_name = MODULE_NAME;
-
-	err = rc_register_device(rc);
-	if (err)
-		goto err_out_free;
-
-	printk(MODULE_NAME ": %s detected at %s [%s]\n",
-	       ir->name, ir->phys, adap->name);
-
-	/* start polling via eventd */
-	INIT_DELAYED_WORK(&ir->work, ir_work);
-	schedule_delayed_work(&ir->work, 0);
-
-	return 0;
-
- err_out_free:
-	/* Only frees rc if it were allocated internally */
-	rc_free_device(rc);
-	kfree(ir);
-	return err;
-}
-
-static int ir_remove(struct i2c_client *client)
-{
-	struct IR_i2c *ir = i2c_get_clientdata(client);
-
-	/* kill outstanding polls */
-	cancel_delayed_work_sync(&ir->work);
-
-	/* unregister device */
-	if (ir->rc)
-		rc_unregister_device(ir->rc);
-
-	/* free memory */
-	kfree(ir);
-	return 0;
-}
-
-static const struct i2c_device_id ir_kbd_id[] = {
-	/* Generic entry for any IR receiver */
-	{ "ir_video", 0 },
-	/* IR device specific entries should be added here */
-	{ "ir_rx_z8f0811_haup", 0 },
-	{ "ir_rx_z8f0811_hdpvr", 0 },
-	{ }
-};
-
-static struct i2c_driver ir_kbd_driver = {
-	.driver = {
-		.name   = "ir-kbd-i2c",
-	},
-	.probe          = ir_probe,
-	.remove         = ir_remove,
-	.id_table       = ir_kbd_id,
-};
-
-module_i2c_driver(ir_kbd_driver);
-
-/* ----------------------------------------------------------------------- */
-
-MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, Ulrich Mueller");
-MODULE_DESCRIPTION("input driver for i2c IR remote controls");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/ks0127.c b/drivers/media/video/ks0127.c
deleted file mode 100644
index ee7ca2d..0000000
--- a/drivers/media/video/ks0127.c
+++ /dev/null
@@ -1,724 +0,0 @@
-/*
- * Video Capture Driver (Video for Linux 1/2)
- * for the Matrox Marvel G200,G400 and Rainbow Runner-G series
- *
- * This module is an interface to the KS0127 video decoder chip.
- *
- * Copyright (C) 1999  Ryan Drake <stiletto@mediaone.net>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- *****************************************************************************
- *
- * Modified and extended by
- *	Mike Bernson <mike@mlb.org>
- *	Gerard v.d. Horst
- *	Leon van Stuivenberg <l.vanstuivenberg@chello.nl>
- *	Gernot Ziegler <gz@lysator.liu.se>
- *
- * Version History:
- * V1.0 Ryan Drake	   Initial version by Ryan Drake
- * V1.1 Gerard v.d. Horst  Added some debugoutput, reset the video-standard
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <linux/slab.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-#include "ks0127.h"
-
-MODULE_DESCRIPTION("KS0127 video decoder driver");
-MODULE_AUTHOR("Ryan Drake");
-MODULE_LICENSE("GPL");
-
-/* Addresses */
-#define I2C_KS0127_ADDON   0xD8
-#define I2C_KS0127_ONBOARD 0xDA
-
-
-/* ks0127 control registers */
-#define KS_STAT     0x00
-#define KS_CMDA     0x01
-#define KS_CMDB     0x02
-#define KS_CMDC     0x03
-#define KS_CMDD     0x04
-#define KS_HAVB     0x05
-#define KS_HAVE     0x06
-#define KS_HS1B     0x07
-#define KS_HS1E     0x08
-#define KS_HS2B     0x09
-#define KS_HS2E     0x0a
-#define KS_AGC      0x0b
-#define KS_HXTRA    0x0c
-#define KS_CDEM     0x0d
-#define KS_PORTAB   0x0e
-#define KS_LUMA     0x0f
-#define KS_CON      0x10
-#define KS_BRT      0x11
-#define KS_CHROMA   0x12
-#define KS_CHROMB   0x13
-#define KS_DEMOD    0x14
-#define KS_SAT      0x15
-#define KS_HUE      0x16
-#define KS_VERTIA   0x17
-#define KS_VERTIB   0x18
-#define KS_VERTIC   0x19
-#define KS_HSCLL    0x1a
-#define KS_HSCLH    0x1b
-#define KS_VSCLL    0x1c
-#define KS_VSCLH    0x1d
-#define KS_OFMTA    0x1e
-#define KS_OFMTB    0x1f
-#define KS_VBICTL   0x20
-#define KS_CCDAT2   0x21
-#define KS_CCDAT1   0x22
-#define KS_VBIL30   0x23
-#define KS_VBIL74   0x24
-#define KS_VBIL118  0x25
-#define KS_VBIL1512 0x26
-#define KS_TTFRAM   0x27
-#define KS_TESTA    0x28
-#define KS_UVOFFH   0x29
-#define KS_UVOFFL   0x2a
-#define KS_UGAIN    0x2b
-#define KS_VGAIN    0x2c
-#define KS_VAVB     0x2d
-#define KS_VAVE     0x2e
-#define KS_CTRACK   0x2f
-#define KS_POLCTL   0x30
-#define KS_REFCOD   0x31
-#define KS_INVALY   0x32
-#define KS_INVALU   0x33
-#define KS_INVALV   0x34
-#define KS_UNUSEY   0x35
-#define KS_UNUSEU   0x36
-#define KS_UNUSEV   0x37
-#define KS_USRSAV   0x38
-#define KS_USREAV   0x39
-#define KS_SHS1A    0x3a
-#define KS_SHS1B    0x3b
-#define KS_SHS1C    0x3c
-#define KS_CMDE     0x3d
-#define KS_VSDEL    0x3e
-#define KS_CMDF     0x3f
-#define KS_GAMMA0   0x40
-#define KS_GAMMA1   0x41
-#define KS_GAMMA2   0x42
-#define KS_GAMMA3   0x43
-#define KS_GAMMA4   0x44
-#define KS_GAMMA5   0x45
-#define KS_GAMMA6   0x46
-#define KS_GAMMA7   0x47
-#define KS_GAMMA8   0x48
-#define KS_GAMMA9   0x49
-#define KS_GAMMA10  0x4a
-#define KS_GAMMA11  0x4b
-#define KS_GAMMA12  0x4c
-#define KS_GAMMA13  0x4d
-#define KS_GAMMA14  0x4e
-#define KS_GAMMA15  0x4f
-#define KS_GAMMA16  0x50
-#define KS_GAMMA17  0x51
-#define KS_GAMMA18  0x52
-#define KS_GAMMA19  0x53
-#define KS_GAMMA20  0x54
-#define KS_GAMMA21  0x55
-#define KS_GAMMA22  0x56
-#define KS_GAMMA23  0x57
-#define KS_GAMMA24  0x58
-#define KS_GAMMA25  0x59
-#define KS_GAMMA26  0x5a
-#define KS_GAMMA27  0x5b
-#define KS_GAMMA28  0x5c
-#define KS_GAMMA29  0x5d
-#define KS_GAMMA30  0x5e
-#define KS_GAMMA31  0x5f
-#define KS_GAMMAD0  0x60
-#define KS_GAMMAD1  0x61
-#define KS_GAMMAD2  0x62
-#define KS_GAMMAD3  0x63
-#define KS_GAMMAD4  0x64
-#define KS_GAMMAD5  0x65
-#define KS_GAMMAD6  0x66
-#define KS_GAMMAD7  0x67
-#define KS_GAMMAD8  0x68
-#define KS_GAMMAD9  0x69
-#define KS_GAMMAD10 0x6a
-#define KS_GAMMAD11 0x6b
-#define KS_GAMMAD12 0x6c
-#define KS_GAMMAD13 0x6d
-#define KS_GAMMAD14 0x6e
-#define KS_GAMMAD15 0x6f
-#define KS_GAMMAD16 0x70
-#define KS_GAMMAD17 0x71
-#define KS_GAMMAD18 0x72
-#define KS_GAMMAD19 0x73
-#define KS_GAMMAD20 0x74
-#define KS_GAMMAD21 0x75
-#define KS_GAMMAD22 0x76
-#define KS_GAMMAD23 0x77
-#define KS_GAMMAD24 0x78
-#define KS_GAMMAD25 0x79
-#define KS_GAMMAD26 0x7a
-#define KS_GAMMAD27 0x7b
-#define KS_GAMMAD28 0x7c
-#define KS_GAMMAD29 0x7d
-#define KS_GAMMAD30 0x7e
-#define KS_GAMMAD31 0x7f
-
-
-/****************************************************************************
-* mga_dev : represents one ks0127 chip.
-****************************************************************************/
-
-struct adjust {
-	int	contrast;
-	int	bright;
-	int	hue;
-	int	ugain;
-	int	vgain;
-};
-
-struct ks0127 {
-	struct v4l2_subdev sd;
-	v4l2_std_id	norm;
-	int		ident;
-	u8 		regs[256];
-};
-
-static inline struct ks0127 *to_ks0127(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct ks0127, sd);
-}
-
-
-static int debug; /* insmod parameter */
-
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug output");
-
-static u8 reg_defaults[64];
-
-static void init_reg_defaults(void)
-{
-	static int initialized;
-	u8 *table = reg_defaults;
-
-	if (initialized)
-		return;
-	initialized = 1;
-
-	table[KS_CMDA]     = 0x2c;  /* VSE=0, CCIR 601, autodetect standard */
-	table[KS_CMDB]     = 0x12;  /* VALIGN=0, AGC control and input */
-	table[KS_CMDC]     = 0x00;  /* Test options */
-	/* clock & input select, write 1 to PORTA */
-	table[KS_CMDD]     = 0x01;
-	table[KS_HAVB]     = 0x00;  /* HAV Start Control */
-	table[KS_HAVE]     = 0x00;  /* HAV End Control */
-	table[KS_HS1B]     = 0x10;  /* HS1 Start Control */
-	table[KS_HS1E]     = 0x00;  /* HS1 End Control */
-	table[KS_HS2B]     = 0x00;  /* HS2 Start Control */
-	table[KS_HS2E]     = 0x00;  /* HS2 End Control */
-	table[KS_AGC]      = 0x53;  /* Manual setting for AGC */
-	table[KS_HXTRA]    = 0x00;  /* Extra Bits for HAV and HS1/2 */
-	table[KS_CDEM]     = 0x00;  /* Chroma Demodulation Control */
-	table[KS_PORTAB]   = 0x0f;  /* port B is input, port A output GPPORT */
-	table[KS_LUMA]     = 0x01;  /* Luma control */
-	table[KS_CON]      = 0x00;  /* Contrast Control */
-	table[KS_BRT]      = 0x00;  /* Brightness Control */
-	table[KS_CHROMA]   = 0x2a;  /* Chroma control A */
-	table[KS_CHROMB]   = 0x90;  /* Chroma control B */
-	table[KS_DEMOD]    = 0x00;  /* Chroma Demodulation Control & Status */
-	table[KS_SAT]      = 0x00;  /* Color Saturation Control*/
-	table[KS_HUE]      = 0x00;  /* Hue Control */
-	table[KS_VERTIA]   = 0x00;  /* Vertical Processing Control A */
-	/* Vertical Processing Control B, luma 1 line delayed */
-	table[KS_VERTIB]   = 0x12;
-	table[KS_VERTIC]   = 0x0b;  /* Vertical Processing Control C */
-	table[KS_HSCLL]    = 0x00;  /* Horizontal Scaling Ratio Low */
-	table[KS_HSCLH]    = 0x00;  /* Horizontal Scaling Ratio High */
-	table[KS_VSCLL]    = 0x00;  /* Vertical Scaling Ratio Low */
-	table[KS_VSCLH]    = 0x00;  /* Vertical Scaling Ratio High */
-	/* 16 bit YCbCr 4:2:2 output; I can't make the bt866 like 8 bit /Sam */
-	table[KS_OFMTA]    = 0x30;
-	table[KS_OFMTB]    = 0x00;  /* Output Control B */
-	/* VBI Decoder Control; 4bit fmt: avoid Y overflow */
-	table[KS_VBICTL]   = 0x5d;
-	table[KS_CCDAT2]   = 0x00;  /* Read Only register */
-	table[KS_CCDAT1]   = 0x00;  /* Read Only register */
-	table[KS_VBIL30]   = 0xa8;  /* VBI data decoding options */
-	table[KS_VBIL74]   = 0xaa;  /* VBI data decoding options */
-	table[KS_VBIL118]  = 0x2a;  /* VBI data decoding options */
-	table[KS_VBIL1512] = 0x00;  /* VBI data decoding options */
-	table[KS_TTFRAM]   = 0x00;  /* Teletext frame alignment pattern */
-	table[KS_TESTA]    = 0x00;  /* test register, shouldn't be written */
-	table[KS_UVOFFH]   = 0x00;  /* UV Offset Adjustment High */
-	table[KS_UVOFFL]   = 0x00;  /* UV Offset Adjustment Low */
-	table[KS_UGAIN]    = 0x00;  /* U Component Gain Adjustment */
-	table[KS_VGAIN]    = 0x00;  /* V Component Gain Adjustment */
-	table[KS_VAVB]     = 0x07;  /* VAV Begin */
-	table[KS_VAVE]     = 0x00;  /* VAV End */
-	table[KS_CTRACK]   = 0x00;  /* Chroma Tracking Control */
-	table[KS_POLCTL]   = 0x41;  /* Timing Signal Polarity Control */
-	table[KS_REFCOD]   = 0x80;  /* Reference Code Insertion Control */
-	table[KS_INVALY]   = 0x10;  /* Invalid Y Code */
-	table[KS_INVALU]   = 0x80;  /* Invalid U Code */
-	table[KS_INVALV]   = 0x80;  /* Invalid V Code */
-	table[KS_UNUSEY]   = 0x10;  /* Unused Y Code */
-	table[KS_UNUSEU]   = 0x80;  /* Unused U Code */
-	table[KS_UNUSEV]   = 0x80;  /* Unused V Code */
-	table[KS_USRSAV]   = 0x00;  /* reserved */
-	table[KS_USREAV]   = 0x00;  /* reserved */
-	table[KS_SHS1A]    = 0x00;  /* User Defined SHS1 A */
-	/* User Defined SHS1 B, ALT656=1 on 0127B */
-	table[KS_SHS1B]    = 0x80;
-	table[KS_SHS1C]    = 0x00;  /* User Defined SHS1 C */
-	table[KS_CMDE]     = 0x00;  /* Command Register E */
-	table[KS_VSDEL]    = 0x00;  /* VS Delay Control */
-	/* Command Register F, update -immediately- */
-	/* (there might come no vsync)*/
-	table[KS_CMDF]     = 0x02;
-}
-
-
-/* We need to manually read because of a bug in the KS0127 chip.
- *
- * An explanation from kayork@mail.utexas.edu:
- *
- * During I2C reads, the KS0127 only samples for a stop condition
- * during the place where the acknowledge bit should be. Any standard
- * I2C implementation (correctly) throws in another clock transition
- * at the 9th bit, and the KS0127 will not recognize the stop condition
- * and will continue to clock out data.
- *
- * So we have to do the read ourself.  Big deal.
- *	   workaround in i2c-algo-bit
- */
-
-
-static u8 ks0127_read(struct v4l2_subdev *sd, u8 reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	char val = 0;
-	struct i2c_msg msgs[] = {
-		{ client->addr, 0, sizeof(reg), &reg },
-		{ client->addr, I2C_M_RD | I2C_M_NO_RD_ACK, sizeof(val), &val }
-	};
-	int ret;
-
-	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
-	if (ret != ARRAY_SIZE(msgs))
-		v4l2_dbg(1, debug, sd, "read error\n");
-
-	return val;
-}
-
-
-static void ks0127_write(struct v4l2_subdev *sd, u8 reg, u8 val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ks0127 *ks = to_ks0127(sd);
-	char msg[] = { reg, val };
-
-	if (i2c_master_send(client, msg, sizeof(msg)) != sizeof(msg))
-		v4l2_dbg(1, debug, sd, "write error\n");
-
-	ks->regs[reg] = val;
-}
-
-
-/* generic bit-twiddling */
-static void ks0127_and_or(struct v4l2_subdev *sd, u8 reg, u8 and_v, u8 or_v)
-{
-	struct ks0127 *ks = to_ks0127(sd);
-
-	u8 val = ks->regs[reg];
-	val = (val & and_v) | or_v;
-	ks0127_write(sd, reg, val);
-}
-
-
-
-/****************************************************************************
-* ks0127 private api
-****************************************************************************/
-static void ks0127_init(struct v4l2_subdev *sd)
-{
-	struct ks0127 *ks = to_ks0127(sd);
-	u8 *table = reg_defaults;
-	int i;
-
-	ks->ident = V4L2_IDENT_KS0127;
-
-	v4l2_dbg(1, debug, sd, "reset\n");
-	msleep(1);
-
-	/* initialize all registers to known values */
-	/* (except STAT, 0x21, 0x22, TEST and 0x38,0x39) */
-
-	for (i = 1; i < 33; i++)
-		ks0127_write(sd, i, table[i]);
-
-	for (i = 35; i < 40; i++)
-		ks0127_write(sd, i, table[i]);
-
-	for (i = 41; i < 56; i++)
-		ks0127_write(sd, i, table[i]);
-
-	for (i = 58; i < 64; i++)
-		ks0127_write(sd, i, table[i]);
-
-
-	if ((ks0127_read(sd, KS_STAT) & 0x80) == 0) {
-		ks->ident = V4L2_IDENT_KS0122S;
-		v4l2_dbg(1, debug, sd, "ks0122s found\n");
-		return;
-	}
-
-	switch (ks0127_read(sd, KS_CMDE) & 0x0f) {
-	case 0:
-		v4l2_dbg(1, debug, sd, "ks0127 found\n");
-		break;
-
-	case 9:
-		ks->ident = V4L2_IDENT_KS0127B;
-		v4l2_dbg(1, debug, sd, "ks0127B Revision A found\n");
-		break;
-
-	default:
-		v4l2_dbg(1, debug, sd, "unknown revision\n");
-		break;
-	}
-}
-
-static int ks0127_s_routing(struct v4l2_subdev *sd,
-			    u32 input, u32 output, u32 config)
-{
-	struct ks0127 *ks = to_ks0127(sd);
-
-	switch (input) {
-	case KS_INPUT_COMPOSITE_1:
-	case KS_INPUT_COMPOSITE_2:
-	case KS_INPUT_COMPOSITE_3:
-	case KS_INPUT_COMPOSITE_4:
-	case KS_INPUT_COMPOSITE_5:
-	case KS_INPUT_COMPOSITE_6:
-		v4l2_dbg(1, debug, sd,
-			"s_routing %d: Composite\n", input);
-		/* autodetect 50/60 Hz */
-		ks0127_and_or(sd, KS_CMDA,   0xfc, 0x00);
-		/* VSE=0 */
-		ks0127_and_or(sd, KS_CMDA,   ~0x40, 0x00);
-		/* set input line */
-		ks0127_and_or(sd, KS_CMDB,   0xb0, input);
-		/* non-freerunning mode */
-		ks0127_and_or(sd, KS_CMDC,   0x70, 0x0a);
-		/* analog input */
-		ks0127_and_or(sd, KS_CMDD,   0x03, 0x00);
-		/* enable chroma demodulation */
-		ks0127_and_or(sd, KS_CTRACK, 0xcf, 0x00);
-		/* chroma trap, HYBWR=1 */
-		ks0127_and_or(sd, KS_LUMA,   0x00,
-			       (reg_defaults[KS_LUMA])|0x0c);
-		/* scaler fullbw, luma comb off */
-		ks0127_and_or(sd, KS_VERTIA, 0x08, 0x81);
-		/* manual chroma comb .25 .5 .25 */
-		ks0127_and_or(sd, KS_VERTIC, 0x0f, 0x90);
-
-		/* chroma path delay */
-		ks0127_and_or(sd, KS_CHROMB, 0x0f, 0x90);
-
-		ks0127_write(sd, KS_UGAIN, reg_defaults[KS_UGAIN]);
-		ks0127_write(sd, KS_VGAIN, reg_defaults[KS_VGAIN]);
-		ks0127_write(sd, KS_UVOFFH, reg_defaults[KS_UVOFFH]);
-		ks0127_write(sd, KS_UVOFFL, reg_defaults[KS_UVOFFL]);
-		break;
-
-	case KS_INPUT_SVIDEO_1:
-	case KS_INPUT_SVIDEO_2:
-	case KS_INPUT_SVIDEO_3:
-		v4l2_dbg(1, debug, sd,
-			"s_routing %d: S-Video\n", input);
-		/* autodetect 50/60 Hz */
-		ks0127_and_or(sd, KS_CMDA,   0xfc, 0x00);
-		/* VSE=0 */
-		ks0127_and_or(sd, KS_CMDA,   ~0x40, 0x00);
-		/* set input line */
-		ks0127_and_or(sd, KS_CMDB,   0xb0, input);
-		/* non-freerunning mode */
-		ks0127_and_or(sd, KS_CMDC,   0x70, 0x0a);
-		/* analog input */
-		ks0127_and_or(sd, KS_CMDD,   0x03, 0x00);
-		/* enable chroma demodulation */
-		ks0127_and_or(sd, KS_CTRACK, 0xcf, 0x00);
-		ks0127_and_or(sd, KS_LUMA, 0x00,
-			       reg_defaults[KS_LUMA]);
-		/* disable luma comb */
-		ks0127_and_or(sd, KS_VERTIA, 0x08,
-			       (reg_defaults[KS_VERTIA]&0xf0)|0x01);
-		ks0127_and_or(sd, KS_VERTIC, 0x0f,
-			       reg_defaults[KS_VERTIC]&0xf0);
-
-		ks0127_and_or(sd, KS_CHROMB, 0x0f,
-			       reg_defaults[KS_CHROMB]&0xf0);
-
-		ks0127_write(sd, KS_UGAIN, reg_defaults[KS_UGAIN]);
-		ks0127_write(sd, KS_VGAIN, reg_defaults[KS_VGAIN]);
-		ks0127_write(sd, KS_UVOFFH, reg_defaults[KS_UVOFFH]);
-		ks0127_write(sd, KS_UVOFFL, reg_defaults[KS_UVOFFL]);
-		break;
-
-	case KS_INPUT_YUV656:
-		v4l2_dbg(1, debug, sd, "s_routing 15: YUV656\n");
-		if (ks->norm & V4L2_STD_525_60)
-			/* force 60 Hz */
-			ks0127_and_or(sd, KS_CMDA,   0xfc, 0x03);
-		else
-			/* force 50 Hz */
-			ks0127_and_or(sd, KS_CMDA,   0xfc, 0x02);
-
-		ks0127_and_or(sd, KS_CMDA,   0xff, 0x40); /* VSE=1 */
-		/* set input line and VALIGN */
-		ks0127_and_or(sd, KS_CMDB,   0xb0, (input | 0x40));
-		/* freerunning mode, */
-		/* TSTGEN = 1 TSTGFR=11 TSTGPH=0 TSTGPK=0  VMEM=1*/
-		ks0127_and_or(sd, KS_CMDC,   0x70, 0x87);
-		/* digital input, SYNDIR = 0 INPSL=01 CLKDIR=0 EAV=0 */
-		ks0127_and_or(sd, KS_CMDD,   0x03, 0x08);
-		/* disable chroma demodulation */
-		ks0127_and_or(sd, KS_CTRACK, 0xcf, 0x30);
-		/* HYPK =01 CTRAP = 0 HYBWR=0 PED=1 RGBH=1 UNIT=1 */
-		ks0127_and_or(sd, KS_LUMA,   0x00, 0x71);
-		ks0127_and_or(sd, KS_VERTIC, 0x0f,
-			       reg_defaults[KS_VERTIC]&0xf0);
-
-		/* scaler fullbw, luma comb off */
-		ks0127_and_or(sd, KS_VERTIA, 0x08, 0x81);
-
-		ks0127_and_or(sd, KS_CHROMB, 0x0f,
-			       reg_defaults[KS_CHROMB]&0xf0);
-
-		ks0127_and_or(sd, KS_CON, 0x00, 0x00);
-		ks0127_and_or(sd, KS_BRT, 0x00, 32);	/* spec: 34 */
-			/* spec: 229 (e5) */
-		ks0127_and_or(sd, KS_SAT, 0x00, 0xe8);
-		ks0127_and_or(sd, KS_HUE, 0x00, 0);
-
-		ks0127_and_or(sd, KS_UGAIN, 0x00, 238);
-		ks0127_and_or(sd, KS_VGAIN, 0x00, 0x00);
-
-		/*UOFF:0x30, VOFF:0x30, TSTCGN=1 */
-		ks0127_and_or(sd, KS_UVOFFH, 0x00, 0x4f);
-		ks0127_and_or(sd, KS_UVOFFL, 0x00, 0x00);
-		break;
-
-	default:
-		v4l2_dbg(1, debug, sd,
-			"s_routing: Unknown input %d\n", input);
-		break;
-	}
-
-	/* hack: CDMLPF sometimes spontaneously switches on; */
-	/* force back off */
-	ks0127_write(sd, KS_DEMOD, reg_defaults[KS_DEMOD]);
-	return 0;
-}
-
-static int ks0127_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct ks0127 *ks = to_ks0127(sd);
-
-	/* Set to automatic SECAM/Fsc mode */
-	ks0127_and_or(sd, KS_DEMOD, 0xf0, 0x00);
-
-	ks->norm = std;
-	if (std & V4L2_STD_NTSC) {
-		v4l2_dbg(1, debug, sd,
-			"s_std: NTSC_M\n");
-		ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x20);
-	} else if (std & V4L2_STD_PAL_N) {
-		v4l2_dbg(1, debug, sd,
-			"s_std: NTSC_N (fixme)\n");
-		ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x40);
-	} else if (std & V4L2_STD_PAL) {
-		v4l2_dbg(1, debug, sd,
-			"s_std: PAL_N\n");
-		ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x20);
-	} else if (std & V4L2_STD_PAL_M) {
-		v4l2_dbg(1, debug, sd,
-			"s_std: PAL_M (fixme)\n");
-		ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x40);
-	} else if (std & V4L2_STD_SECAM) {
-		v4l2_dbg(1, debug, sd,
-			"s_std: SECAM\n");
-
-		/* set to secam autodetection */
-		ks0127_and_or(sd, KS_CHROMA, 0xdf, 0x20);
-		ks0127_and_or(sd, KS_DEMOD, 0xf0, 0x00);
-		schedule_timeout_interruptible(HZ/10+1);
-
-		/* did it autodetect? */
-		if (!(ks0127_read(sd, KS_DEMOD) & 0x40))
-			/* force to secam mode */
-			ks0127_and_or(sd, KS_DEMOD, 0xf0, 0x0f);
-	} else {
-		v4l2_dbg(1, debug, sd, "s_std: Unknown norm %llx\n",
-			       (unsigned long long)std);
-	}
-	return 0;
-}
-
-static int ks0127_s_stream(struct v4l2_subdev *sd, int enable)
-{
-	v4l2_dbg(1, debug, sd, "s_stream(%d)\n", enable);
-	if (enable) {
-		/* All output pins on */
-		ks0127_and_or(sd, KS_OFMTA, 0xcf, 0x30);
-		/* Obey the OEN pin */
-		ks0127_and_or(sd, KS_CDEM, 0x7f, 0x00);
-	} else {
-		/* Video output pins off */
-		ks0127_and_or(sd, KS_OFMTA, 0xcf, 0x00);
-		/* Ignore the OEN pin */
-		ks0127_and_or(sd, KS_CDEM, 0x7f, 0x80);
-	}
-	return 0;
-}
-
-static int ks0127_status(struct v4l2_subdev *sd, u32 *pstatus, v4l2_std_id *pstd)
-{
-	int stat = V4L2_IN_ST_NO_SIGNAL;
-	u8 status;
-	v4l2_std_id std = V4L2_STD_ALL;
-
-	status = ks0127_read(sd, KS_STAT);
-	if (!(status & 0x20))		 /* NOVID not set */
-		stat = 0;
-	if (!(status & 0x01))		      /* CLOCK set */
-		stat |= V4L2_IN_ST_NO_COLOR;
-	if ((status & 0x08))		   /* PALDET set */
-		std = V4L2_STD_PAL;
-	else
-		std = V4L2_STD_NTSC;
-	if (pstd)
-		*pstd = std;
-	if (pstatus)
-		*pstatus = stat;
-	return 0;
-}
-
-static int ks0127_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
-{
-	v4l2_dbg(1, debug, sd, "querystd\n");
-	return ks0127_status(sd, NULL, std);
-}
-
-static int ks0127_g_input_status(struct v4l2_subdev *sd, u32 *status)
-{
-	v4l2_dbg(1, debug, sd, "g_input_status\n");
-	return ks0127_status(sd, status, NULL);
-}
-
-static int ks0127_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ks0127 *ks = to_ks0127(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, ks->ident, 0);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops ks0127_core_ops = {
-	.g_chip_ident = ks0127_g_chip_ident,
-	.s_std = ks0127_s_std,
-};
-
-static const struct v4l2_subdev_video_ops ks0127_video_ops = {
-	.s_routing = ks0127_s_routing,
-	.s_stream = ks0127_s_stream,
-	.querystd = ks0127_querystd,
-	.g_input_status = ks0127_g_input_status,
-};
-
-static const struct v4l2_subdev_ops ks0127_ops = {
-	.core = &ks0127_core_ops,
-	.video = &ks0127_video_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-
-static int ks0127_probe(struct i2c_client *client, const struct i2c_device_id *id)
-{
-	struct ks0127 *ks;
-	struct v4l2_subdev *sd;
-
-	v4l_info(client, "%s chip found @ 0x%x (%s)\n",
-		client->addr == (I2C_KS0127_ADDON >> 1) ? "addon" : "on-board",
-		client->addr << 1, client->adapter->name);
-
-	ks = kzalloc(sizeof(*ks), GFP_KERNEL);
-	if (ks == NULL)
-		return -ENOMEM;
-	sd = &ks->sd;
-	v4l2_i2c_subdev_init(sd, client, &ks0127_ops);
-
-	/* power up */
-	init_reg_defaults();
-	ks0127_write(sd, KS_CMDA, 0x2c);
-	mdelay(10);
-
-	/* reset the device */
-	ks0127_init(sd);
-	return 0;
-}
-
-static int ks0127_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-
-	v4l2_device_unregister_subdev(sd);
-	ks0127_write(sd, KS_OFMTA, 0x20); /* tristate */
-	ks0127_write(sd, KS_CMDA, 0x2c | 0x80); /* power down */
-	kfree(to_ks0127(sd));
-	return 0;
-}
-
-static const struct i2c_device_id ks0127_id[] = {
-	{ "ks0127", 0 },
-	{ "ks0127b", 0 },
-	{ "ks0122s", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, ks0127_id);
-
-static struct i2c_driver ks0127_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "ks0127",
-	},
-	.probe		= ks0127_probe,
-	.remove		= ks0127_remove,
-	.id_table	= ks0127_id,
-};
-
-module_i2c_driver(ks0127_driver);
diff --git a/drivers/media/video/ks0127.h b/drivers/media/video/ks0127.h
deleted file mode 100644
index cb8abd5..0000000
--- a/drivers/media/video/ks0127.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Video Capture Driver ( Video for Linux 1/2 )
- * for the Matrox Marvel G200,G400 and Rainbow Runner-G series
- *
- * This module is an interface to the KS0127 video decoder chip.
- *
- * Copyright (C) 1999  Ryan Drake <stiletto@mediaone.net>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef KS0127_H
-#define KS0127_H
-
-/* input channels */
-#define KS_INPUT_COMPOSITE_1    0
-#define KS_INPUT_COMPOSITE_2    1
-#define KS_INPUT_COMPOSITE_3    2
-#define KS_INPUT_COMPOSITE_4    4
-#define KS_INPUT_COMPOSITE_5    5
-#define KS_INPUT_COMPOSITE_6    6
-
-#define KS_INPUT_SVIDEO_1       8
-#define KS_INPUT_SVIDEO_2       9
-#define KS_INPUT_SVIDEO_3       10
-
-#define KS_INPUT_YUV656		15
-#define KS_INPUT_COUNT          10
-
-/* output channels */
-#define KS_OUTPUT_YUV656E       0
-#define KS_OUTPUT_EXV           1
-
-/* video standards */
-#define KS_STD_NTSC_N           112       /* 50 Hz NTSC */
-#define KS_STD_PAL_M            113       /* 60 Hz PAL  */
-
-#endif /* KS0127_H */
-
diff --git a/drivers/media/video/m52790.c b/drivers/media/video/m52790.c
deleted file mode 100644
index 0991576..0000000
--- a/drivers/media/video/m52790.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * m52790 i2c ivtv driver.
- * Copyright (C) 2007  Hans Verkuil
- *
- * A/V source switching Mitsubishi M52790SP/FP
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/ioctl.h>
-#include <asm/uaccess.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <media/m52790.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-
-MODULE_DESCRIPTION("i2c device driver for m52790 A/V switch");
-MODULE_AUTHOR("Hans Verkuil");
-MODULE_LICENSE("GPL");
-
-
-struct m52790_state {
-	struct v4l2_subdev sd;
-	u16 input;
-	u16 output;
-};
-
-static inline struct m52790_state *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct m52790_state, sd);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int m52790_write(struct v4l2_subdev *sd)
-{
-	struct m52790_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	u8 sw1 = (state->input | state->output) & 0xff;
-	u8 sw2 = (state->input | state->output) >> 8;
-
-	return i2c_smbus_write_byte_data(client, sw1, sw2);
-}
-
-/* Note: audio and video are linked and cannot be switched separately.
-   So audio and video routing commands are identical for this chip.
-   In theory the video amplifier and audio modes could be handled
-   separately for the output, but that seems to be overkill right now.
-   The same holds for implementing an audio mute control, this is now
-   part of the audio output routing. The normal case is that another
-   chip takes care of the actual muting so making it part of the
-   output routing seems to be the right thing to do for now. */
-static int m52790_s_routing(struct v4l2_subdev *sd,
-			    u32 input, u32 output, u32 config)
-{
-	struct m52790_state *state = to_state(sd);
-
-	state->input = input;
-	state->output = output;
-	m52790_write(sd);
-	return 0;
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int m52790_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct m52790_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	if (reg->reg != 0)
-		return -EINVAL;
-	reg->size = 1;
-	reg->val = state->input | state->output;
-	return 0;
-}
-
-static int m52790_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct m52790_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	if (reg->reg != 0)
-		return -EINVAL;
-	state->input = reg->val & 0x0303;
-	state->output = reg->val & ~0x0303;
-	m52790_write(sd);
-	return 0;
-}
-#endif
-
-static int m52790_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_M52790, 0);
-}
-
-static int m52790_log_status(struct v4l2_subdev *sd)
-{
-	struct m52790_state *state = to_state(sd);
-
-	v4l2_info(sd, "Switch 1: %02x\n",
-			(state->input | state->output) & 0xff);
-	v4l2_info(sd, "Switch 2: %02x\n",
-			(state->input | state->output) >> 8);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops m52790_core_ops = {
-	.log_status = m52790_log_status,
-	.g_chip_ident = m52790_g_chip_ident,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.g_register = m52790_g_register,
-	.s_register = m52790_s_register,
-#endif
-};
-
-static const struct v4l2_subdev_audio_ops m52790_audio_ops = {
-	.s_routing = m52790_s_routing,
-};
-
-static const struct v4l2_subdev_video_ops m52790_video_ops = {
-	.s_routing = m52790_s_routing,
-};
-
-static const struct v4l2_subdev_ops m52790_ops = {
-	.core = &m52790_core_ops,
-	.audio = &m52790_audio_ops,
-	.video = &m52790_video_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-/* i2c implementation */
-
-static int m52790_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	struct m52790_state *state;
-	struct v4l2_subdev *sd;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -EIO;
-
-	v4l_info(client, "chip found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	state = kzalloc(sizeof(struct m52790_state), GFP_KERNEL);
-	if (state == NULL)
-		return -ENOMEM;
-
-	sd = &state->sd;
-	v4l2_i2c_subdev_init(sd, client, &m52790_ops);
-	state->input = M52790_IN_TUNER;
-	state->output = M52790_OUT_STEREO;
-	m52790_write(sd);
-	return 0;
-}
-
-static int m52790_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-
-	v4l2_device_unregister_subdev(sd);
-	kfree(to_state(sd));
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct i2c_device_id m52790_id[] = {
-	{ "m52790", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, m52790_id);
-
-static struct i2c_driver m52790_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "m52790",
-	},
-	.probe		= m52790_probe,
-	.remove		= m52790_remove,
-	.id_table	= m52790_id,
-};
-
-module_i2c_driver(m52790_driver);
diff --git a/drivers/media/video/m5mols/Kconfig b/drivers/media/video/m5mols/Kconfig
deleted file mode 100644
index dc8c250..0000000
--- a/drivers/media/video/m5mols/Kconfig
+++ /dev/null
@@ -1,6 +0,0 @@
-config VIDEO_M5MOLS
-	tristate "Fujitsu M-5MOLS 8MP sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
-	depends on MEDIA_CAMERA_SUPPORT
-	---help---
-	  This driver supports Fujitsu M-5MOLS camera sensor with ISP
diff --git a/drivers/media/video/m5mols/Makefile b/drivers/media/video/m5mols/Makefile
deleted file mode 100644
index 0a44e02..0000000
--- a/drivers/media/video/m5mols/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-m5mols-objs	:= m5mols_core.o m5mols_controls.o m5mols_capture.o
-
-obj-$(CONFIG_VIDEO_M5MOLS)		+= m5mols.o
diff --git a/drivers/media/video/m5mols/m5mols.h b/drivers/media/video/m5mols/m5mols.h
deleted file mode 100644
index bb58991..0000000
--- a/drivers/media/video/m5mols/m5mols.h
+++ /dev/null
@@ -1,334 +0,0 @@
-/*
- * Header for M-5MOLS 8M Pixel camera sensor with ISP
- *
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim <riverful.kim@samsung.com>
- *
- * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef M5MOLS_H
-#define M5MOLS_H
-
-#include <media/v4l2-subdev.h>
-#include "m5mols_reg.h"
-
-extern int m5mols_debug;
-
-enum m5mols_restype {
-	M5MOLS_RESTYPE_MONITOR,
-	M5MOLS_RESTYPE_CAPTURE,
-	M5MOLS_RESTYPE_MAX,
-};
-
-/**
- * struct m5mols_resolution - structure for the resolution
- * @type: resolution type according to the pixel code
- * @width: width of the resolution
- * @height: height of the resolution
- * @reg: resolution preset register value
- */
-struct m5mols_resolution {
-	u8 reg;
-	enum m5mols_restype type;
-	u16 width;
-	u16 height;
-};
-
-/**
- * struct m5mols_exif - structure for the EXIF information of M-5MOLS
- * @exposure_time: exposure time register value
- * @shutter_speed: speed of the shutter register value
- * @aperture: aperture register value
- * @exposure_bias: it calls also EV bias
- * @iso_speed: ISO register value
- * @flash: status register value of the flash
- * @sdr: status register value of the Subject Distance Range
- * @qval: not written exact meaning in document
- */
-struct m5mols_exif {
-	u32 exposure_time;
-	u32 shutter_speed;
-	u32 aperture;
-	u32 brightness;
-	u32 exposure_bias;
-	u16 iso_speed;
-	u16 flash;
-	u16 sdr;
-	u16 qval;
-};
-
-/**
- * struct m5mols_capture - Structure for the capture capability
- * @exif: EXIF information
- * @main: size in bytes of the main image
- * @thumb: size in bytes of the thumb image, if it was accompanied
- * @total: total size in bytes of the produced image
- */
-struct m5mols_capture {
-	struct m5mols_exif exif;
-	u32 main;
-	u32 thumb;
-	u32 total;
-};
-
-/**
- * struct m5mols_scenemode - structure for the scenemode capability
- * @metering: metering light register value
- * @ev_bias: EV bias register value
- * @wb_mode: mode which means the WhiteBalance is Auto or Manual
- * @wb_preset: whitebalance preset register value in the Manual mode
- * @chroma_en: register value whether the Chroma capability is enabled or not
- * @chroma_lvl: chroma's level register value
- * @edge_en: register value Whether the Edge capability is enabled or not
- * @edge_lvl: edge's level register value
- * @af_range: Auto Focus's range
- * @fd_mode: Face Detection mode
- * @mcc: Multi-axis Color Conversion which means emotion color
- * @light: status of the Light
- * @flash: status of the Flash
- * @tone: Tone color which means Contrast
- * @iso: ISO register value
- * @capt_mode: Mode of the Image Stabilization while the camera capturing
- * @wdr: Wide Dynamic Range register value
- *
- * The each value according to each scenemode is recommended in the documents.
- */
-struct m5mols_scenemode {
-	u8 metering;
-	u8 ev_bias;
-	u8 wb_mode;
-	u8 wb_preset;
-	u8 chroma_en;
-	u8 chroma_lvl;
-	u8 edge_en;
-	u8 edge_lvl;
-	u8 af_range;
-	u8 fd_mode;
-	u8 mcc;
-	u8 light;
-	u8 flash;
-	u8 tone;
-	u8 iso;
-	u8 capt_mode;
-	u8 wdr;
-};
-
-/**
- * struct m5mols_version - firmware version information
- * @customer:	customer information
- * @project:	version of project information according to customer
- * @fw:		firmware revision
- * @hw:		hardware revision
- * @param:	version of the parameter
- * @awb:	Auto WhiteBalance algorithm version
- * @str:	information about manufacturer and packaging vendor
- * @af:		Auto Focus version
- *
- * The register offset starts the customer version at 0x0, and it ends
- * the awb version at 0x09. The customer, project information occupies 1 bytes
- * each. And also the fw, hw, param, awb each requires 2 bytes. The str is
- * unique string associated with firmware's version. It includes information
- * about manufacturer and the vendor of the sensor's packaging. The least
- * significant 2 bytes of the string indicate packaging manufacturer.
- */
-#define VERSION_STRING_SIZE	22
-struct m5mols_version {
-	u8	customer;
-	u8	project;
-	u16	fw;
-	u16	hw;
-	u16	param;
-	u16	awb;
-	u8	str[VERSION_STRING_SIZE];
-	u8	af;
-};
-
-/**
- * struct m5mols_info - M-5MOLS driver data structure
- * @pdata: platform data
- * @sd: v4l-subdev instance
- * @pad: media pad
- * @ffmt: current fmt according to resolution type
- * @res_type: current resolution type
- * @irq_waitq: waitqueue for the capture
- * @irq_done: set to 1 in the interrupt handler
- * @handle: control handler
- * @auto_exposure: auto/manual exposure control
- * @exposure_bias: exposure compensation control
- * @exposure: manual exposure control
- * @metering: exposure metering control
- * @auto_iso: auto/manual ISO sensitivity control
- * @iso: manual ISO sensitivity control
- * @auto_wb: auto white balance control
- * @lock_3a: 3A lock control
- * @colorfx: color effect control
- * @saturation: saturation control
- * @zoom: zoom control
- * @wdr: wide dynamic range control
- * @stabilization: image stabilization control
- * @jpeg_quality: JPEG compression quality control
- * @ver: information of the version
- * @cap: the capture mode attributes
- * @isp_ready: 1 when the ISP controller has completed booting
- * @power: current sensor's power status
- * @ctrl_sync: 1 when the control handler state is restored in H/W
- * @resolution:	register value for current resolution
- * @mode: register value for current operation mode
- * @set_power: optional power callback to the board code
- */
-struct m5mols_info {
-	const struct m5mols_platform_data *pdata;
-	struct v4l2_subdev sd;
-	struct media_pad pad;
-	struct v4l2_mbus_framefmt ffmt[M5MOLS_RESTYPE_MAX];
-	int res_type;
-
-	wait_queue_head_t irq_waitq;
-	atomic_t irq_done;
-
-	struct v4l2_ctrl_handler handle;
-	struct {
-		/* exposure/exposure bias/auto exposure cluster */
-		struct v4l2_ctrl *auto_exposure;
-		struct v4l2_ctrl *exposure_bias;
-		struct v4l2_ctrl *exposure;
-		struct v4l2_ctrl *metering;
-	};
-	struct {
-		/* iso/auto iso cluster */
-		struct v4l2_ctrl *auto_iso;
-		struct v4l2_ctrl *iso;
-	};
-	struct v4l2_ctrl *auto_wb;
-
-	struct v4l2_ctrl *lock_3a;
-	struct v4l2_ctrl *colorfx;
-	struct v4l2_ctrl *saturation;
-	struct v4l2_ctrl *zoom;
-	struct v4l2_ctrl *wdr;
-	struct v4l2_ctrl *stabilization;
-	struct v4l2_ctrl *jpeg_quality;
-
-	struct m5mols_version ver;
-	struct m5mols_capture cap;
-
-	unsigned int isp_ready:1;
-	unsigned int power:1;
-	unsigned int ctrl_sync:1;
-
-	u8 resolution;
-	u8 mode;
-
-	int (*set_power)(struct device *dev, int on);
-};
-
-#define is_available_af(__info)	(__info->ver.af)
-#define is_code(__code, __type) (__code == m5mols_default_ffmt[__type].code)
-#define is_manufacturer(__info, __manufacturer)	\
-				(__info->ver.str[0] == __manufacturer[0] && \
-				 __info->ver.str[1] == __manufacturer[1])
-/*
- * I2C operation of the M-5MOLS
- *
- * The I2C read operation of the M-5MOLS requires 2 messages. The first
- * message sends the information about the command, command category, and total
- * message size. The second message is used to retrieve the data specifed in
- * the first message
- *
- *   1st message                                2nd message
- *   +-------+---+----------+-----+-------+     +------+------+------+------+
- *   | size1 | R | category | cmd | size2 |     | d[0] | d[1] | d[2] | d[3] |
- *   +-------+---+----------+-----+-------+     +------+------+------+------+
- *   - size1: message data size(5 in this case)
- *   - size2: desired buffer size of the 2nd message
- *   - d[0..3]: according to size2
- *
- * The I2C write operation needs just one message. The message includes
- * category, command, total size, and desired data.
- *
- *   1st message
- *   +-------+---+----------+-----+------+------+------+------+
- *   | size1 | W | category | cmd | d[0] | d[1] | d[2] | d[3] |
- *   +-------+---+----------+-----+------+------+------+------+
- *   - d[0..3]: according to size1
- */
-int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg_comb, u8 *val);
-int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg_comb, u16 *val);
-int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg_comb, u32 *val);
-int m5mols_write(struct v4l2_subdev *sd, u32 reg_comb, u32 val);
-
-int m5mols_busy_wait(struct v4l2_subdev *sd, u32 reg, u32 value, u32 mask,
-		     int timeout);
-
-/* Mask value for busy waiting until M-5MOLS I2C interface is initialized */
-#define M5MOLS_I2C_RDY_WAIT_FL		(1 << 16)
-/* ISP state transition timeout, in ms */
-#define M5MOLS_MODE_CHANGE_TIMEOUT	200
-#define M5MOLS_BUSY_WAIT_DEF_TIMEOUT	250
-
-/*
- * Mode operation of the M-5MOLS
- *
- * Changing the mode of the M-5MOLS is needed right executing order.
- * There are three modes(PARAMETER, MONITOR, CAPTURE) which can be changed
- * by user. There are various categories associated with each mode.
- *
- * +============================================================+
- * | mode	| category					|
- * +============================================================+
- * | FLASH	| FLASH(only after Stand-by or Power-on)	|
- * | SYSTEM	| SYSTEM(only after sensor arm-booting)		|
- * | PARAMETER	| PARAMETER					|
- * | MONITOR	| MONITOR(preview), Auto Focus, Face Detection	|
- * | CAPTURE	| Single CAPTURE, Preview(recording)		|
- * +============================================================+
- *
- * The available executing order between each modes are as follows:
- *   PARAMETER <---> MONITOR <---> CAPTURE
- */
-int m5mols_set_mode(struct m5mols_info *info, u8 mode);
-
-int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg);
-int m5mols_wait_interrupt(struct v4l2_subdev *sd, u8 condition, u32 timeout);
-int m5mols_restore_controls(struct m5mols_info *info);
-int m5mols_start_capture(struct m5mols_info *info);
-int m5mols_do_scenemode(struct m5mols_info *info, u8 mode);
-int m5mols_lock_3a(struct m5mols_info *info, bool lock);
-int m5mols_set_ctrl(struct v4l2_ctrl *ctrl);
-int m5mols_init_controls(struct v4l2_subdev *sd);
-
-/* The firmware function */
-int m5mols_update_fw(struct v4l2_subdev *sd,
-		     int (*set_power)(struct m5mols_info *, bool));
-
-static inline struct m5mols_info *to_m5mols(struct v4l2_subdev *subdev)
-{
-	return container_of(subdev, struct m5mols_info, sd);
-}
-
-static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
-{
-	struct m5mols_info *info = container_of(ctrl->handler,
-						struct m5mols_info, handle);
-	return &info->sd;
-}
-
-static inline void m5mols_set_ctrl_mode(struct v4l2_ctrl *ctrl,
-					unsigned int mode)
-{
-	ctrl->priv = (void *)mode;
-}
-
-static inline unsigned int m5mols_get_ctrl_mode(struct v4l2_ctrl *ctrl)
-{
-	return (unsigned int)ctrl->priv;
-}
-
-#endif	/* M5MOLS_H */
diff --git a/drivers/media/video/m5mols/m5mols_capture.c b/drivers/media/video/m5mols/m5mols_capture.c
deleted file mode 100644
index cb243bd..0000000
--- a/drivers/media/video/m5mols/m5mols_capture.c
+++ /dev/null
@@ -1,155 +0,0 @@
-
-/*
- * The Capture code for Fujitsu M-5MOLS ISP
- *
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim <riverful.kim@samsung.com>
- *
- * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/regulator/consumer.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-subdev.h>
-#include <media/m5mols.h>
-#include <media/s5p_fimc.h>
-
-#include "m5mols.h"
-#include "m5mols_reg.h"
-
-/**
- * m5mols_read_rational - I2C read of a rational number
- *
- * Read numerator and denominator from registers @addr_num and @addr_den
- * respectively and return the division result in @val.
- */
-static int m5mols_read_rational(struct v4l2_subdev *sd, u32 addr_num,
-				u32 addr_den, u32 *val)
-{
-	u32 num, den;
-
-	int ret = m5mols_read_u32(sd, addr_num, &num);
-	if (!ret)
-		ret = m5mols_read_u32(sd, addr_den, &den);
-	if (ret)
-		return ret;
-	*val = den == 0 ? 0 : num / den;
-	return ret;
-}
-
-/**
- * m5mols_capture_info - Gather captured image information
- *
- * For now it gathers only EXIF information and file size.
- */
-static int m5mols_capture_info(struct m5mols_info *info)
-{
-	struct m5mols_exif *exif = &info->cap.exif;
-	struct v4l2_subdev *sd = &info->sd;
-	int ret;
-
-	ret = m5mols_read_rational(sd, EXIF_INFO_EXPTIME_NU,
-				   EXIF_INFO_EXPTIME_DE, &exif->exposure_time);
-	if (ret)
-		return ret;
-	ret = m5mols_read_rational(sd, EXIF_INFO_TV_NU, EXIF_INFO_TV_DE,
-				   &exif->shutter_speed);
-	if (ret)
-		return ret;
-	ret = m5mols_read_rational(sd, EXIF_INFO_AV_NU, EXIF_INFO_AV_DE,
-				   &exif->aperture);
-	if (ret)
-		return ret;
-	ret = m5mols_read_rational(sd, EXIF_INFO_BV_NU, EXIF_INFO_BV_DE,
-				   &exif->brightness);
-	if (ret)
-		return ret;
-	ret = m5mols_read_rational(sd, EXIF_INFO_EBV_NU, EXIF_INFO_EBV_DE,
-				   &exif->exposure_bias);
-	if (ret)
-		return ret;
-
-	ret = m5mols_read_u16(sd, EXIF_INFO_ISO, &exif->iso_speed);
-	if (!ret)
-		ret = m5mols_read_u16(sd, EXIF_INFO_FLASH, &exif->flash);
-	if (!ret)
-		ret = m5mols_read_u16(sd, EXIF_INFO_SDR, &exif->sdr);
-	if (!ret)
-		ret = m5mols_read_u16(sd, EXIF_INFO_QVAL, &exif->qval);
-	if (ret)
-		return ret;
-
-	if (!ret)
-		ret = m5mols_read_u32(sd, CAPC_IMAGE_SIZE, &info->cap.main);
-	if (!ret)
-		ret = m5mols_read_u32(sd, CAPC_THUMB_SIZE, &info->cap.thumb);
-	if (!ret)
-		info->cap.total = info->cap.main + info->cap.thumb;
-
-	return ret;
-}
-
-int m5mols_start_capture(struct m5mols_info *info)
-{
-	struct v4l2_subdev *sd = &info->sd;
-	int ret;
-
-	/*
-	 * Synchronize the controls, set the capture frame resolution and color
-	 * format. The frame capture is initiated during switching from Monitor
-	 * to Capture mode.
-	 */
-	ret = m5mols_set_mode(info, REG_MONITOR);
-	if (!ret)
-		ret = m5mols_restore_controls(info);
-	if (!ret)
-		ret = m5mols_write(sd, CAPP_YUVOUT_MAIN, REG_JPEG);
-	if (!ret)
-		ret = m5mols_write(sd, CAPP_MAIN_IMAGE_SIZE, info->resolution);
-	if (!ret)
-		ret = m5mols_set_mode(info, REG_CAPTURE);
-	if (!ret)
-		/* Wait until a frame is captured to ISP internal memory */
-		ret = m5mols_wait_interrupt(sd, REG_INT_CAPTURE, 2000);
-	if (ret)
-		return ret;
-
-	/*
-	 * Initiate the captured data transfer to a MIPI-CSI receiver.
-	 */
-	ret = m5mols_write(sd, CAPC_SEL_FRAME, 1);
-	if (!ret)
-		ret = m5mols_write(sd, CAPC_START, REG_CAP_START_MAIN);
-	if (!ret) {
-		bool captured = false;
-		unsigned int size;
-
-		/* Wait for the capture completion interrupt */
-		ret = m5mols_wait_interrupt(sd, REG_INT_CAPTURE, 2000);
-		if (!ret) {
-			captured = true;
-			ret = m5mols_capture_info(info);
-		}
-		size = captured ? info->cap.main : 0;
-		v4l2_dbg(1, m5mols_debug, sd, "%s: size: %d, thumb.: %d B\n",
-			 __func__, size, info->cap.thumb);
-
-		v4l2_subdev_notify(sd, S5P_FIMC_TX_END_NOTIFY, &size);
-	}
-
-	return ret;
-}
diff --git a/drivers/media/video/m5mols/m5mols_controls.c b/drivers/media/video/m5mols/m5mols_controls.c
deleted file mode 100644
index fdbc205..0000000
--- a/drivers/media/video/m5mols/m5mols_controls.c
+++ /dev/null
@@ -1,628 +0,0 @@
-/*
- * Controls for M-5MOLS 8M Pixel camera sensor with ISP
- *
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim <riverful.kim@samsung.com>
- *
- * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/i2c.h>
-#include <linux/delay.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-ctrls.h>
-
-#include "m5mols.h"
-#include "m5mols_reg.h"
-
-static struct m5mols_scenemode m5mols_default_scenemode[] = {
-	[REG_SCENE_NORMAL] = {
-		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
-		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
-		REG_AF_NORMAL, REG_FD_OFF,
-		REG_MCC_NORMAL, REG_LIGHT_OFF, REG_FLASH_OFF,
-		5, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
-	},
-	[REG_SCENE_PORTRAIT] = {
-		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
-		REG_CHROMA_ON, 3, REG_EDGE_ON, 4,
-		REG_AF_NORMAL, BIT_FD_EN | BIT_FD_DRAW_FACE_FRAME,
-		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
-		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
-	},
-	[REG_SCENE_LANDSCAPE] = {
-		REG_AE_ALL, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
-		REG_CHROMA_ON, 4, REG_EDGE_ON, 6,
-		REG_AF_NORMAL, REG_FD_OFF,
-		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
-		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
-	},
-	[REG_SCENE_SPORTS] = {
-		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
-		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
-		REG_AF_NORMAL, REG_FD_OFF,
-		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
-		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
-	},
-	[REG_SCENE_PARTY_INDOOR] = {
-		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
-		REG_CHROMA_ON, 4, REG_EDGE_ON, 5,
-		REG_AF_NORMAL, REG_FD_OFF,
-		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
-		6, REG_ISO_200, REG_CAP_NONE, REG_WDR_OFF,
-	},
-	[REG_SCENE_BEACH_SNOW] = {
-		REG_AE_CENTER, REG_AE_INDEX_10_POS, REG_AWB_AUTO, 0,
-		REG_CHROMA_ON, 4, REG_EDGE_ON, 5,
-		REG_AF_NORMAL, REG_FD_OFF,
-		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
-		6, REG_ISO_50, REG_CAP_NONE, REG_WDR_OFF,
-	},
-	[REG_SCENE_SUNSET] = {
-		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_PRESET,
-		REG_AWB_DAYLIGHT,
-		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
-		REG_AF_NORMAL, REG_FD_OFF,
-		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
-		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
-	},
-	[REG_SCENE_DAWN_DUSK] = {
-		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_PRESET,
-		REG_AWB_FLUORESCENT_1,
-		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
-		REG_AF_NORMAL, REG_FD_OFF,
-		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
-		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
-	},
-	[REG_SCENE_FALL] = {
-		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
-		REG_CHROMA_ON, 5, REG_EDGE_ON, 5,
-		REG_AF_NORMAL, REG_FD_OFF,
-		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
-		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
-	},
-	[REG_SCENE_NIGHT] = {
-		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
-		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
-		REG_AF_NORMAL, REG_FD_OFF,
-		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
-		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
-	},
-	[REG_SCENE_AGAINST_LIGHT] = {
-		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
-		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
-		REG_AF_NORMAL, REG_FD_OFF,
-		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
-		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
-	},
-	[REG_SCENE_FIRE] = {
-		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
-		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
-		REG_AF_NORMAL, REG_FD_OFF,
-		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
-		6, REG_ISO_50, REG_CAP_NONE, REG_WDR_OFF,
-	},
-	[REG_SCENE_TEXT] = {
-		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
-		REG_CHROMA_ON, 3, REG_EDGE_ON, 7,
-		REG_AF_MACRO, REG_FD_OFF,
-		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
-		6, REG_ISO_AUTO, REG_CAP_ANTI_SHAKE, REG_WDR_ON,
-	},
-	[REG_SCENE_CANDLE] = {
-		REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0,
-		REG_CHROMA_ON, 3, REG_EDGE_ON, 5,
-		REG_AF_NORMAL, REG_FD_OFF,
-		REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF,
-		6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF,
-	},
-};
-
-/**
- * m5mols_do_scenemode() - Change current scenemode
- * @mode:	Desired mode of the scenemode
- *
- * WARNING: The execution order is important. Do not change the order.
- */
-int m5mols_do_scenemode(struct m5mols_info *info, u8 mode)
-{
-	struct v4l2_subdev *sd = &info->sd;
-	struct m5mols_scenemode scenemode = m5mols_default_scenemode[mode];
-	int ret;
-
-	if (mode > REG_SCENE_CANDLE)
-		return -EINVAL;
-
-	ret = v4l2_ctrl_s_ctrl(info->lock_3a, 0);
-	if (!ret)
-		ret = m5mols_write(sd, AE_EV_PRESET_MONITOR, mode);
-	if (!ret)
-		ret = m5mols_write(sd, AE_EV_PRESET_CAPTURE, mode);
-	if (!ret)
-		ret = m5mols_write(sd, AE_MODE, scenemode.metering);
-	if (!ret)
-		ret = m5mols_write(sd, AE_INDEX, scenemode.ev_bias);
-	if (!ret)
-		ret = m5mols_write(sd, AWB_MODE, scenemode.wb_mode);
-	if (!ret)
-		ret = m5mols_write(sd, AWB_MANUAL, scenemode.wb_preset);
-	if (!ret)
-		ret = m5mols_write(sd, MON_CHROMA_EN, scenemode.chroma_en);
-	if (!ret)
-		ret = m5mols_write(sd, MON_CHROMA_LVL, scenemode.chroma_lvl);
-	if (!ret)
-		ret = m5mols_write(sd, MON_EDGE_EN, scenemode.edge_en);
-	if (!ret)
-		ret = m5mols_write(sd, MON_EDGE_LVL, scenemode.edge_lvl);
-	if (!ret && is_available_af(info))
-		ret = m5mols_write(sd, AF_MODE, scenemode.af_range);
-	if (!ret && is_available_af(info))
-		ret = m5mols_write(sd, FD_CTL, scenemode.fd_mode);
-	if (!ret)
-		ret = m5mols_write(sd, MON_TONE_CTL, scenemode.tone);
-	if (!ret)
-		ret = m5mols_write(sd, AE_ISO, scenemode.iso);
-	if (!ret)
-		ret = m5mols_set_mode(info, REG_CAPTURE);
-	if (!ret)
-		ret = m5mols_write(sd, CAPP_WDR_EN, scenemode.wdr);
-	if (!ret)
-		ret = m5mols_write(sd, CAPP_MCC_MODE, scenemode.mcc);
-	if (!ret)
-		ret = m5mols_write(sd, CAPP_LIGHT_CTRL, scenemode.light);
-	if (!ret)
-		ret = m5mols_write(sd, CAPP_FLASH_CTRL, scenemode.flash);
-	if (!ret)
-		ret = m5mols_write(sd, CAPC_MODE, scenemode.capt_mode);
-	if (!ret)
-		ret = m5mols_set_mode(info, REG_MONITOR);
-
-	return ret;
-}
-
-static int m5mols_3a_lock(struct m5mols_info *info, struct v4l2_ctrl *ctrl)
-{
-	bool af_lock = ctrl->val & V4L2_LOCK_FOCUS;
-	int ret = 0;
-
-	if ((ctrl->val ^ ctrl->cur.val) & V4L2_LOCK_EXPOSURE) {
-		bool ae_lock = ctrl->val & V4L2_LOCK_EXPOSURE;
-
-		ret = m5mols_write(&info->sd, AE_LOCK, ae_lock ?
-				   REG_AE_LOCK : REG_AE_UNLOCK);
-		if (ret)
-			return ret;
-	}
-
-	if (((ctrl->val ^ ctrl->cur.val) & V4L2_LOCK_WHITE_BALANCE)
-	    && info->auto_wb->val) {
-		bool awb_lock = ctrl->val & V4L2_LOCK_WHITE_BALANCE;
-
-		ret = m5mols_write(&info->sd, AWB_LOCK, awb_lock ?
-				   REG_AWB_LOCK : REG_AWB_UNLOCK);
-		if (ret)
-			return ret;
-	}
-
-	if (!info->ver.af || !af_lock)
-		return ret;
-
-	if ((ctrl->val ^ ctrl->cur.val) & V4L2_LOCK_FOCUS)
-		ret = m5mols_write(&info->sd, AF_EXECUTE, REG_AF_STOP);
-
-	return ret;
-}
-
-static int m5mols_set_metering_mode(struct m5mols_info *info, int mode)
-{
-	unsigned int metering;
-
-	switch (mode) {
-	case V4L2_EXPOSURE_METERING_CENTER_WEIGHTED:
-		metering = REG_AE_CENTER;
-		break;
-	case V4L2_EXPOSURE_METERING_SPOT:
-		metering = REG_AE_SPOT;
-		break;
-	default:
-		metering = REG_AE_ALL;
-		break;
-	}
-
-	return m5mols_write(&info->sd, AE_MODE, metering);
-}
-
-static int m5mols_set_exposure(struct m5mols_info *info, int exposure)
-{
-	struct v4l2_subdev *sd = &info->sd;
-	int ret = 0;
-
-	if (exposure == V4L2_EXPOSURE_AUTO) {
-		/* Unlock auto exposure */
-		info->lock_3a->val &= ~V4L2_LOCK_EXPOSURE;
-		m5mols_3a_lock(info, info->lock_3a);
-
-		ret = m5mols_set_metering_mode(info, info->metering->val);
-		if (ret < 0)
-			return ret;
-
-		v4l2_dbg(1, m5mols_debug, sd,
-			 "%s: exposure bias: %#x, metering: %#x\n",
-			 __func__, info->exposure_bias->val,
-			 info->metering->val);
-
-		return m5mols_write(sd, AE_INDEX, info->exposure_bias->val);
-	}
-
-	if (exposure == V4L2_EXPOSURE_MANUAL) {
-		ret = m5mols_write(sd, AE_MODE, REG_AE_OFF);
-		if (ret == 0)
-			ret = m5mols_write(sd, AE_MAN_GAIN_MON,
-					   info->exposure->val);
-		if (ret == 0)
-			ret = m5mols_write(sd, AE_MAN_GAIN_CAP,
-					   info->exposure->val);
-
-		v4l2_dbg(1, m5mols_debug, sd, "%s: exposure: %#x\n",
-			 __func__, info->exposure->val);
-	}
-
-	return ret;
-}
-
-static int m5mols_set_white_balance(struct m5mols_info *info, int val)
-{
-	static const unsigned short wb[][2] = {
-		{ V4L2_WHITE_BALANCE_INCANDESCENT,  REG_AWB_INCANDESCENT },
-		{ V4L2_WHITE_BALANCE_FLUORESCENT,   REG_AWB_FLUORESCENT_1 },
-		{ V4L2_WHITE_BALANCE_FLUORESCENT_H, REG_AWB_FLUORESCENT_2 },
-		{ V4L2_WHITE_BALANCE_HORIZON,       REG_AWB_HORIZON },
-		{ V4L2_WHITE_BALANCE_DAYLIGHT,      REG_AWB_DAYLIGHT },
-		{ V4L2_WHITE_BALANCE_FLASH,         REG_AWB_LEDLIGHT },
-		{ V4L2_WHITE_BALANCE_CLOUDY,        REG_AWB_CLOUDY },
-		{ V4L2_WHITE_BALANCE_SHADE,         REG_AWB_SHADE },
-		{ V4L2_WHITE_BALANCE_AUTO,          REG_AWB_AUTO },
-	};
-	int i;
-	struct v4l2_subdev *sd = &info->sd;
-	int ret = -EINVAL;
-
-	for (i = 0; i < ARRAY_SIZE(wb); i++) {
-		int awb;
-		if (wb[i][0] != val)
-			continue;
-
-		v4l2_dbg(1, m5mols_debug, sd,
-			 "Setting white balance to: %#x\n", wb[i][0]);
-
-		awb = wb[i][0] == V4L2_WHITE_BALANCE_AUTO;
-		ret = m5mols_write(sd, AWB_MODE, awb ? REG_AWB_AUTO :
-						 REG_AWB_PRESET);
-		if (ret < 0)
-			return ret;
-
-		if (!awb)
-			ret = m5mols_write(sd, AWB_MANUAL, wb[i][1]);
-	}
-
-	return ret;
-}
-
-static int m5mols_set_saturation(struct m5mols_info *info, int val)
-{
-	int ret = m5mols_write(&info->sd, MON_CHROMA_LVL, val);
-	if (ret < 0)
-		return ret;
-
-	return m5mols_write(&info->sd, MON_CHROMA_EN, REG_CHROMA_ON);
-}
-
-static int m5mols_set_color_effect(struct m5mols_info *info, int val)
-{
-	unsigned int m_effect = REG_COLOR_EFFECT_OFF;
-	unsigned int p_effect = REG_EFFECT_OFF;
-	unsigned int cfix_r = 0, cfix_b = 0;
-	struct v4l2_subdev *sd = &info->sd;
-	int ret = 0;
-
-	switch (val) {
-	case V4L2_COLORFX_BW:
-		m_effect = REG_COLOR_EFFECT_ON;
-		break;
-	case V4L2_COLORFX_NEGATIVE:
-		p_effect = REG_EFFECT_NEGA;
-		break;
-	case V4L2_COLORFX_EMBOSS:
-		p_effect = REG_EFFECT_EMBOSS;
-		break;
-	case V4L2_COLORFX_SEPIA:
-		m_effect = REG_COLOR_EFFECT_ON;
-		cfix_r = REG_CFIXR_SEPIA;
-		cfix_b = REG_CFIXB_SEPIA;
-		break;
-	}
-
-	ret = m5mols_write(sd, PARM_EFFECT, p_effect);
-	if (!ret)
-		ret = m5mols_write(sd, MON_EFFECT, m_effect);
-
-	if (ret == 0 && m_effect == REG_COLOR_EFFECT_ON) {
-		ret = m5mols_write(sd, MON_CFIXR, cfix_r);
-		if (!ret)
-			ret = m5mols_write(sd, MON_CFIXB, cfix_b);
-	}
-
-	v4l2_dbg(1, m5mols_debug, sd,
-		 "p_effect: %#x, m_effect: %#x, r: %#x, b: %#x (%d)\n",
-		 p_effect, m_effect, cfix_r, cfix_b, ret);
-
-	return ret;
-}
-
-static int m5mols_set_iso(struct m5mols_info *info, int auto_iso)
-{
-	u32 iso = auto_iso ? 0 : info->iso->val + 1;
-
-	return m5mols_write(&info->sd, AE_ISO, iso);
-}
-
-static int m5mols_set_wdr(struct m5mols_info *info, int wdr)
-{
-	int ret;
-
-	ret = m5mols_write(&info->sd, MON_TONE_CTL, wdr ? 9 : 5);
-	if (ret < 0)
-		return ret;
-
-	ret = m5mols_set_mode(info, REG_CAPTURE);
-	if (ret < 0)
-		return ret;
-
-	return m5mols_write(&info->sd, CAPP_WDR_EN, wdr);
-}
-
-static int m5mols_set_stabilization(struct m5mols_info *info, int val)
-{
-	struct v4l2_subdev *sd = &info->sd;
-	unsigned int evp = val ? 0xe : 0x0;
-	int ret;
-
-	ret = m5mols_write(sd, AE_EV_PRESET_MONITOR, evp);
-	if (ret < 0)
-		return ret;
-
-	return m5mols_write(sd, AE_EV_PRESET_CAPTURE, evp);
-}
-
-static int m5mols_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-	struct m5mols_info *info = to_m5mols(sd);
-	int ret = 0;
-	u8 status;
-
-	v4l2_dbg(1, m5mols_debug, sd, "%s: ctrl: %s (%d)\n",
-		 __func__, ctrl->name, info->isp_ready);
-
-	if (!info->isp_ready)
-		return -EBUSY;
-
-	switch (ctrl->id) {
-	case V4L2_CID_ISO_SENSITIVITY_AUTO:
-		ret = m5mols_read_u8(sd, AE_ISO, &status);
-		if (ret == 0)
-			ctrl->val = !status;
-		if (status != REG_ISO_AUTO)
-			info->iso->val = status - 1;
-		break;
-
-	case V4L2_CID_3A_LOCK:
-		ctrl->val &= ~0x7;
-
-		ret = m5mols_read_u8(sd, AE_LOCK, &status);
-		if (ret)
-			return ret;
-		if (status)
-			info->lock_3a->val |= V4L2_LOCK_EXPOSURE;
-
-		ret = m5mols_read_u8(sd, AWB_LOCK, &status);
-		if (ret)
-			return ret;
-		if (status)
-			info->lock_3a->val |= V4L2_LOCK_EXPOSURE;
-
-		ret = m5mols_read_u8(sd, AF_EXECUTE, &status);
-		if (!status)
-			info->lock_3a->val |= V4L2_LOCK_EXPOSURE;
-		break;
-	}
-
-	return ret;
-}
-
-static int m5mols_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	unsigned int ctrl_mode = m5mols_get_ctrl_mode(ctrl);
-	struct v4l2_subdev *sd = to_sd(ctrl);
-	struct m5mols_info *info = to_m5mols(sd);
-	int last_mode = info->mode;
-	int ret = 0;
-
-	/*
-	 * If needed, defer restoring the controls until
-	 * the device is fully initialized.
-	 */
-	if (!info->isp_ready) {
-		info->ctrl_sync = 0;
-		return 0;
-	}
-
-	v4l2_dbg(1, m5mols_debug, sd, "%s: %s, val: %d, priv: %#x\n",
-		 __func__, ctrl->name, ctrl->val, (int)ctrl->priv);
-
-	if (ctrl_mode && ctrl_mode != info->mode) {
-		ret = m5mols_set_mode(info, ctrl_mode);
-		if (ret < 0)
-			return ret;
-	}
-
-	switch (ctrl->id) {
-	case V4L2_CID_3A_LOCK:
-		ret = m5mols_3a_lock(info, ctrl);
-		break;
-
-	case V4L2_CID_ZOOM_ABSOLUTE:
-		ret = m5mols_write(sd, MON_ZOOM, ctrl->val);
-		break;
-
-	case V4L2_CID_EXPOSURE_AUTO:
-		ret = m5mols_set_exposure(info, ctrl->val);
-		break;
-
-	case V4L2_CID_ISO_SENSITIVITY:
-		ret = m5mols_set_iso(info, ctrl->val);
-		break;
-
-	case V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE:
-		ret = m5mols_set_white_balance(info, ctrl->val);
-		break;
-
-	case V4L2_CID_SATURATION:
-		ret = m5mols_set_saturation(info, ctrl->val);
-		break;
-
-	case V4L2_CID_COLORFX:
-		ret = m5mols_set_color_effect(info, ctrl->val);
-		break;
-
-	case V4L2_CID_WIDE_DYNAMIC_RANGE:
-		ret = m5mols_set_wdr(info, ctrl->val);
-		break;
-
-	case V4L2_CID_IMAGE_STABILIZATION:
-		ret = m5mols_set_stabilization(info, ctrl->val);
-		break;
-
-	case V4L2_CID_JPEG_COMPRESSION_QUALITY:
-		ret = m5mols_write(sd, CAPP_JPEG_RATIO, ctrl->val);
-		break;
-	}
-
-	if (ret == 0 && info->mode != last_mode)
-		ret = m5mols_set_mode(info, last_mode);
-
-	return ret;
-}
-
-static const struct v4l2_ctrl_ops m5mols_ctrl_ops = {
-	.g_volatile_ctrl	= m5mols_g_volatile_ctrl,
-	.s_ctrl			= m5mols_s_ctrl,
-};
-
-/* Supported manual ISO values */
-static const s64 iso_qmenu[] = {
-	/* AE_ISO: 0x01...0x07 (ISO: 50...3200) */
-	50000, 100000, 200000, 400000, 800000, 1600000, 3200000
-};
-
-/* Supported Exposure Bias values, -2.0EV...+2.0EV */
-static const s64 ev_bias_qmenu[] = {
-	/* AE_INDEX: 0x00...0x08 */
-	-2000, -1500, -1000, -500, 0, 500, 1000, 1500, 2000
-};
-
-int m5mols_init_controls(struct v4l2_subdev *sd)
-{
-	struct m5mols_info *info = to_m5mols(sd);
-	u16 exposure_max;
-	u16 zoom_step;
-	int ret;
-
-	/* Determine the firmware dependant control range and step values */
-	ret = m5mols_read_u16(sd, AE_MAX_GAIN_MON, &exposure_max);
-	if (ret < 0)
-		return ret;
-
-	zoom_step = is_manufacturer(info, REG_SAMSUNG_OPTICS) ? 31 : 1;
-	v4l2_ctrl_handler_init(&info->handle, 20);
-
-	info->auto_wb = v4l2_ctrl_new_std_menu(&info->handle,
-			&m5mols_ctrl_ops, V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE,
-			9, ~0x3fe, V4L2_WHITE_BALANCE_AUTO);
-
-	/* Exposure control cluster */
-	info->auto_exposure = v4l2_ctrl_new_std_menu(&info->handle,
-			&m5mols_ctrl_ops, V4L2_CID_EXPOSURE_AUTO,
-			1, ~0x03, V4L2_EXPOSURE_AUTO);
-
-	info->exposure = v4l2_ctrl_new_std(&info->handle,
-			&m5mols_ctrl_ops, V4L2_CID_EXPOSURE,
-			0, exposure_max, 1, exposure_max / 2);
-
-	info->exposure_bias = v4l2_ctrl_new_int_menu(&info->handle,
-			&m5mols_ctrl_ops, V4L2_CID_AUTO_EXPOSURE_BIAS,
-			ARRAY_SIZE(ev_bias_qmenu) - 1,
-			ARRAY_SIZE(ev_bias_qmenu)/2 - 1,
-			ev_bias_qmenu);
-
-	info->metering = v4l2_ctrl_new_std_menu(&info->handle,
-			&m5mols_ctrl_ops, V4L2_CID_EXPOSURE_METERING,
-			2, ~0x7, V4L2_EXPOSURE_METERING_AVERAGE);
-
-	/* ISO control cluster */
-	info->auto_iso = v4l2_ctrl_new_std_menu(&info->handle, &m5mols_ctrl_ops,
-			V4L2_CID_ISO_SENSITIVITY_AUTO, 1, ~0x03, 1);
-
-	info->iso = v4l2_ctrl_new_int_menu(&info->handle, &m5mols_ctrl_ops,
-			V4L2_CID_ISO_SENSITIVITY, ARRAY_SIZE(iso_qmenu) - 1,
-			ARRAY_SIZE(iso_qmenu)/2 - 1, iso_qmenu);
-
-	info->saturation = v4l2_ctrl_new_std(&info->handle, &m5mols_ctrl_ops,
-			V4L2_CID_SATURATION, 1, 5, 1, 3);
-
-	info->zoom = v4l2_ctrl_new_std(&info->handle, &m5mols_ctrl_ops,
-			V4L2_CID_ZOOM_ABSOLUTE, 1, 70, zoom_step, 1);
-
-	info->colorfx = v4l2_ctrl_new_std_menu(&info->handle, &m5mols_ctrl_ops,
-			V4L2_CID_COLORFX, 4, 0, V4L2_COLORFX_NONE);
-
-	info->wdr = v4l2_ctrl_new_std(&info->handle, &m5mols_ctrl_ops,
-			V4L2_CID_WIDE_DYNAMIC_RANGE, 0, 1, 1, 0);
-
-	info->stabilization = v4l2_ctrl_new_std(&info->handle, &m5mols_ctrl_ops,
-			V4L2_CID_IMAGE_STABILIZATION, 0, 1, 1, 0);
-
-	info->jpeg_quality = v4l2_ctrl_new_std(&info->handle, &m5mols_ctrl_ops,
-			V4L2_CID_JPEG_COMPRESSION_QUALITY, 1, 100, 1, 80);
-
-	info->lock_3a = v4l2_ctrl_new_std(&info->handle, &m5mols_ctrl_ops,
-			V4L2_CID_3A_LOCK, 0, 0x7, 0, 0);
-
-	if (info->handle.error) {
-		int ret = info->handle.error;
-		v4l2_err(sd, "Failed to initialize controls: %d\n", ret);
-		v4l2_ctrl_handler_free(&info->handle);
-		return ret;
-	}
-
-	v4l2_ctrl_auto_cluster(4, &info->auto_exposure, 1, false);
-	info->auto_iso->flags |= V4L2_CTRL_FLAG_VOLATILE |
-				V4L2_CTRL_FLAG_UPDATE;
-	v4l2_ctrl_auto_cluster(2, &info->auto_iso, 0, false);
-
-	info->lock_3a->flags |= V4L2_CTRL_FLAG_VOLATILE;
-
-	m5mols_set_ctrl_mode(info->auto_exposure, REG_PARAMETER);
-	m5mols_set_ctrl_mode(info->auto_wb, REG_PARAMETER);
-	m5mols_set_ctrl_mode(info->colorfx, REG_MONITOR);
-
-	sd->ctrl_handler = &info->handle;
-
-	return 0;
-}
diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c
deleted file mode 100644
index ac7d28b..0000000
--- a/drivers/media/video/m5mols/m5mols_core.c
+++ /dev/null
@@ -1,990 +0,0 @@
-/*
- * Driver for M-5MOLS 8M Pixel camera sensor with ISP
- *
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim <riverful.kim@samsung.com>
- *
- * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/regulator/consumer.h>
-#include <linux/videodev2.h>
-#include <linux/module.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-subdev.h>
-#include <media/m5mols.h>
-
-#include "m5mols.h"
-#include "m5mols_reg.h"
-
-int m5mols_debug;
-module_param(m5mols_debug, int, 0644);
-
-#define MODULE_NAME		"M5MOLS"
-#define M5MOLS_I2C_CHECK_RETRY	500
-
-/* The regulator consumer names for external voltage regulators */
-static struct regulator_bulk_data supplies[] = {
-	{
-		.supply = "core",	/* ARM core power, 1.2V */
-	}, {
-		.supply	= "dig_18",	/* digital power 1, 1.8V */
-	}, {
-		.supply	= "d_sensor",	/* sensor power 1, 1.8V */
-	}, {
-		.supply	= "dig_28",	/* digital power 2, 2.8V */
-	}, {
-		.supply	= "a_sensor",	/* analog power */
-	}, {
-		.supply	= "dig_12",	/* digital power 3, 1.2V */
-	},
-};
-
-static struct v4l2_mbus_framefmt m5mols_default_ffmt[M5MOLS_RESTYPE_MAX] = {
-	[M5MOLS_RESTYPE_MONITOR] = {
-		.width		= 1920,
-		.height		= 1080,
-		.code		= V4L2_MBUS_FMT_VYUY8_2X8,
-		.field		= V4L2_FIELD_NONE,
-		.colorspace	= V4L2_COLORSPACE_JPEG,
-	},
-	[M5MOLS_RESTYPE_CAPTURE] = {
-		.width		= 1920,
-		.height		= 1080,
-		.code		= V4L2_MBUS_FMT_JPEG_1X8,
-		.field		= V4L2_FIELD_NONE,
-		.colorspace	= V4L2_COLORSPACE_JPEG,
-	},
-};
-#define SIZE_DEFAULT_FFMT	ARRAY_SIZE(m5mols_default_ffmt)
-
-static const struct m5mols_resolution m5mols_reg_res[] = {
-	{ 0x01, M5MOLS_RESTYPE_MONITOR, 128, 96 },	/* SUB-QCIF */
-	{ 0x03, M5MOLS_RESTYPE_MONITOR, 160, 120 },	/* QQVGA */
-	{ 0x05, M5MOLS_RESTYPE_MONITOR, 176, 144 },	/* QCIF */
-	{ 0x06, M5MOLS_RESTYPE_MONITOR, 176, 176 },
-	{ 0x08, M5MOLS_RESTYPE_MONITOR, 240, 320 },	/* QVGA */
-	{ 0x09, M5MOLS_RESTYPE_MONITOR, 320, 240 },	/* QVGA */
-	{ 0x0c, M5MOLS_RESTYPE_MONITOR, 240, 400 },	/* WQVGA */
-	{ 0x0d, M5MOLS_RESTYPE_MONITOR, 400, 240 },	/* WQVGA */
-	{ 0x0e, M5MOLS_RESTYPE_MONITOR, 352, 288 },	/* CIF */
-	{ 0x13, M5MOLS_RESTYPE_MONITOR, 480, 360 },
-	{ 0x15, M5MOLS_RESTYPE_MONITOR, 640, 360 },	/* qHD */
-	{ 0x17, M5MOLS_RESTYPE_MONITOR, 640, 480 },	/* VGA */
-	{ 0x18, M5MOLS_RESTYPE_MONITOR, 720, 480 },
-	{ 0x1a, M5MOLS_RESTYPE_MONITOR, 800, 480 },	/* WVGA */
-	{ 0x1f, M5MOLS_RESTYPE_MONITOR, 800, 600 },	/* SVGA */
-	{ 0x21, M5MOLS_RESTYPE_MONITOR, 1280, 720 },	/* HD */
-	{ 0x25, M5MOLS_RESTYPE_MONITOR, 1920, 1080 },	/* 1080p */
-	{ 0x29, M5MOLS_RESTYPE_MONITOR, 3264, 2448 },	/* 2.63fps 8M */
-	{ 0x39, M5MOLS_RESTYPE_MONITOR, 800, 602 },	/* AHS_MON debug */
-
-	{ 0x02, M5MOLS_RESTYPE_CAPTURE, 320, 240 },	/* QVGA */
-	{ 0x04, M5MOLS_RESTYPE_CAPTURE, 400, 240 },	/* WQVGA */
-	{ 0x07, M5MOLS_RESTYPE_CAPTURE, 480, 360 },
-	{ 0x08, M5MOLS_RESTYPE_CAPTURE, 640, 360 },	/* qHD */
-	{ 0x09, M5MOLS_RESTYPE_CAPTURE, 640, 480 },	/* VGA */
-	{ 0x0a, M5MOLS_RESTYPE_CAPTURE, 800, 480 },	/* WVGA */
-	{ 0x10, M5MOLS_RESTYPE_CAPTURE, 1280, 720 },	/* HD */
-	{ 0x14, M5MOLS_RESTYPE_CAPTURE, 1280, 960 },	/* 1M */
-	{ 0x17, M5MOLS_RESTYPE_CAPTURE, 1600, 1200 },	/* 2M */
-	{ 0x19, M5MOLS_RESTYPE_CAPTURE, 1920, 1080 },	/* Full-HD */
-	{ 0x1a, M5MOLS_RESTYPE_CAPTURE, 2048, 1152 },	/* 3Mega */
-	{ 0x1b, M5MOLS_RESTYPE_CAPTURE, 2048, 1536 },
-	{ 0x1c, M5MOLS_RESTYPE_CAPTURE, 2560, 1440 },	/* 4Mega */
-	{ 0x1d, M5MOLS_RESTYPE_CAPTURE, 2560, 1536 },
-	{ 0x1f, M5MOLS_RESTYPE_CAPTURE, 2560, 1920 },	/* 5Mega */
-	{ 0x21, M5MOLS_RESTYPE_CAPTURE, 3264, 1836 },	/* 6Mega */
-	{ 0x22, M5MOLS_RESTYPE_CAPTURE, 3264, 1960 },
-	{ 0x25, M5MOLS_RESTYPE_CAPTURE, 3264, 2448 },	/* 8Mega */
-};
-
-/**
- * m5mols_swap_byte - an byte array to integer conversion function
- * @size: size in bytes of I2C packet defined in the M-5MOLS datasheet
- *
- * Convert I2C data byte array with performing any required byte
- * reordering to assure proper values for each data type, regardless
- * of the architecture endianness.
- */
-static u32 m5mols_swap_byte(u8 *data, u8 length)
-{
-	if (length == 1)
-		return *data;
-	else if (length == 2)
-		return be16_to_cpu(*((u16 *)data));
-	else
-		return be32_to_cpu(*((u32 *)data));
-}
-
-/**
- * m5mols_read -  I2C read function
- * @reg: combination of size, category and command for the I2C packet
- * @size: desired size of I2C packet
- * @val: read value
- *
- * Returns 0 on success, or else negative errno.
- */
-static int m5mols_read(struct v4l2_subdev *sd, u32 size, u32 reg, u32 *val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct m5mols_info *info = to_m5mols(sd);
-	u8 rbuf[M5MOLS_I2C_MAX_SIZE + 1];
-	u8 category = I2C_CATEGORY(reg);
-	u8 cmd = I2C_COMMAND(reg);
-	struct i2c_msg msg[2];
-	u8 wbuf[5];
-	int ret;
-
-	if (!client->adapter)
-		return -ENODEV;
-
-	msg[0].addr = client->addr;
-	msg[0].flags = 0;
-	msg[0].len = 5;
-	msg[0].buf = wbuf;
-	wbuf[0] = 5;
-	wbuf[1] = M5MOLS_BYTE_READ;
-	wbuf[2] = category;
-	wbuf[3] = cmd;
-	wbuf[4] = size;
-
-	msg[1].addr = client->addr;
-	msg[1].flags = I2C_M_RD;
-	msg[1].len = size + 1;
-	msg[1].buf = rbuf;
-
-	/* minimum stabilization time */
-	usleep_range(200, 200);
-
-	ret = i2c_transfer(client->adapter, msg, 2);
-
-	if (ret == 2) {
-		*val = m5mols_swap_byte(&rbuf[1], size);
-		return 0;
-	}
-
-	if (info->isp_ready)
-		v4l2_err(sd, "read failed: size:%d cat:%02x cmd:%02x. %d\n",
-			 size, category, cmd, ret);
-
-	return ret < 0 ? ret : -EIO;
-}
-
-int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg, u8 *val)
-{
-	u32 val_32;
-	int ret;
-
-	if (I2C_SIZE(reg) != 1) {
-		v4l2_err(sd, "Wrong data size\n");
-		return -EINVAL;
-	}
-
-	ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32);
-	if (ret)
-		return ret;
-
-	*val = (u8)val_32;
-	return ret;
-}
-
-int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg, u16 *val)
-{
-	u32 val_32;
-	int ret;
-
-	if (I2C_SIZE(reg) != 2) {
-		v4l2_err(sd, "Wrong data size\n");
-		return -EINVAL;
-	}
-
-	ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32);
-	if (ret)
-		return ret;
-
-	*val = (u16)val_32;
-	return ret;
-}
-
-int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg, u32 *val)
-{
-	if (I2C_SIZE(reg) != 4) {
-		v4l2_err(sd, "Wrong data size\n");
-		return -EINVAL;
-	}
-
-	return m5mols_read(sd, I2C_SIZE(reg), reg, val);
-}
-
-/**
- * m5mols_write - I2C command write function
- * @reg: combination of size, category and command for the I2C packet
- * @val: value to write
- *
- * Returns 0 on success, or else negative errno.
- */
-int m5mols_write(struct v4l2_subdev *sd, u32 reg, u32 val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct m5mols_info *info = to_m5mols(sd);
-	u8 wbuf[M5MOLS_I2C_MAX_SIZE + 4];
-	u8 category = I2C_CATEGORY(reg);
-	u8 cmd = I2C_COMMAND(reg);
-	u8 size	= I2C_SIZE(reg);
-	u32 *buf = (u32 *)&wbuf[4];
-	struct i2c_msg msg[1];
-	int ret;
-
-	if (!client->adapter)
-		return -ENODEV;
-
-	if (size != 1 && size != 2 && size != 4) {
-		v4l2_err(sd, "Wrong data size\n");
-		return -EINVAL;
-	}
-
-	msg->addr = client->addr;
-	msg->flags = 0;
-	msg->len = (u16)size + 4;
-	msg->buf = wbuf;
-	wbuf[0] = size + 4;
-	wbuf[1] = M5MOLS_BYTE_WRITE;
-	wbuf[2] = category;
-	wbuf[3] = cmd;
-
-	*buf = m5mols_swap_byte((u8 *)&val, size);
-
-	usleep_range(200, 200);
-
-	ret = i2c_transfer(client->adapter, msg, 1);
-	if (ret == 1)
-		return 0;
-
-	if (info->isp_ready)
-		v4l2_err(sd, "write failed: cat:%02x cmd:%02x ret:%d\n",
-			 category, cmd, ret);
-
-	return ret < 0 ? ret : -EIO;
-}
-
-/**
- * m5mols_busy_wait - Busy waiting with I2C register polling
- * @reg: the I2C_REG() address of an 8-bit status register to check
- * @value: expected status register value
- * @mask: bit mask for the read status register value
- * @timeout: timeout in miliseconds, or -1 for default timeout
- *
- * The @reg register value is ORed with @mask before comparing with @value.
- *
- * Return: 0 if the requested condition became true within less than
- *         @timeout ms, or else negative errno.
- */
-int m5mols_busy_wait(struct v4l2_subdev *sd, u32 reg, u32 value, u32 mask,
-		     int timeout)
-{
-	int ms = timeout < 0 ? M5MOLS_BUSY_WAIT_DEF_TIMEOUT : timeout;
-	unsigned long end = jiffies + msecs_to_jiffies(ms);
-	u8 status;
-
-	do {
-		int ret = m5mols_read_u8(sd, reg, &status);
-
-		if (ret < 0 && !(mask & M5MOLS_I2C_RDY_WAIT_FL))
-			return ret;
-		if (!ret && (status & mask & 0xff) == (value & 0xff))
-			return 0;
-		usleep_range(100, 250);
-	} while (ms > 0 && time_is_after_jiffies(end));
-
-	return -EBUSY;
-}
-
-/**
- * m5mols_enable_interrupt - Clear interrupt pending bits and unmask interrupts
- *
- * Before writing desired interrupt value the INT_FACTOR register should
- * be read to clear pending interrupts.
- */
-int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg)
-{
-	struct m5mols_info *info = to_m5mols(sd);
-	u8 mask = is_available_af(info) ? REG_INT_AF : 0;
-	u8 dummy;
-	int ret;
-
-	ret = m5mols_read_u8(sd, SYSTEM_INT_FACTOR, &dummy);
-	if (!ret)
-		ret = m5mols_write(sd, SYSTEM_INT_ENABLE, reg & ~mask);
-	return ret;
-}
-
-int m5mols_wait_interrupt(struct v4l2_subdev *sd, u8 irq_mask, u32 timeout)
-{
-	struct m5mols_info *info = to_m5mols(sd);
-
-	int ret = wait_event_interruptible_timeout(info->irq_waitq,
-				atomic_add_unless(&info->irq_done, -1, 0),
-				msecs_to_jiffies(timeout));
-	if (ret <= 0)
-		return ret ? ret : -ETIMEDOUT;
-
-	return m5mols_busy_wait(sd, SYSTEM_INT_FACTOR, irq_mask,
-				M5MOLS_I2C_RDY_WAIT_FL | irq_mask, -1);
-}
-
-/**
- * m5mols_reg_mode - Write the mode and check busy status
- *
- * It always accompanies a little delay changing the M-5MOLS mode, so it is
- * needed checking current busy status to guarantee right mode.
- */
-static int m5mols_reg_mode(struct v4l2_subdev *sd, u8 mode)
-{
-	int ret = m5mols_write(sd, SYSTEM_SYSMODE, mode);
-	if (ret < 0)
-		return ret;
-	return m5mols_busy_wait(sd, SYSTEM_SYSMODE, mode, 0xff,
-				M5MOLS_MODE_CHANGE_TIMEOUT);
-}
-
-/**
- * m5mols_set_mode - set the M-5MOLS controller mode
- * @mode: the required operation mode
- *
- * The commands of M-5MOLS are grouped into specific modes. Each functionality
- * can be guaranteed only when the sensor is operating in mode which a command
- * belongs to.
- */
-int m5mols_set_mode(struct m5mols_info *info, u8 mode)
-{
-	struct v4l2_subdev *sd = &info->sd;
-	int ret = -EINVAL;
-	u8 reg;
-
-	if (mode < REG_PARAMETER || mode > REG_CAPTURE)
-		return ret;
-
-	ret = m5mols_read_u8(sd, SYSTEM_SYSMODE, &reg);
-	if (ret || reg == mode)
-		return ret;
-
-	switch (reg) {
-	case REG_PARAMETER:
-		ret = m5mols_reg_mode(sd, REG_MONITOR);
-		if (mode == REG_MONITOR)
-			break;
-		if (!ret)
-			ret = m5mols_reg_mode(sd, REG_CAPTURE);
-		break;
-
-	case REG_MONITOR:
-		if (mode == REG_PARAMETER) {
-			ret = m5mols_reg_mode(sd, REG_PARAMETER);
-			break;
-		}
-
-		ret = m5mols_reg_mode(sd, REG_CAPTURE);
-		break;
-
-	case REG_CAPTURE:
-		ret = m5mols_reg_mode(sd, REG_MONITOR);
-		if (mode == REG_MONITOR)
-			break;
-		if (!ret)
-			ret = m5mols_reg_mode(sd, REG_PARAMETER);
-		break;
-
-	default:
-		v4l2_warn(sd, "Wrong mode: %d\n", mode);
-	}
-
-	if (!ret)
-		info->mode = mode;
-
-	return ret;
-}
-
-/**
- * m5mols_get_version - retrieve full revisions information of M-5MOLS
- *
- * The version information includes revisions of hardware and firmware,
- * AutoFocus alghorithm version and the version string.
- */
-static int m5mols_get_version(struct v4l2_subdev *sd)
-{
-	struct m5mols_info *info = to_m5mols(sd);
-	struct m5mols_version *ver = &info->ver;
-	u8 *str = ver->str;
-	int i;
-	int ret;
-
-	ret = m5mols_read_u8(sd, SYSTEM_VER_CUSTOMER, &ver->customer);
-	if (!ret)
-		ret = m5mols_read_u8(sd, SYSTEM_VER_PROJECT, &ver->project);
-	if (!ret)
-		ret = m5mols_read_u16(sd, SYSTEM_VER_FIRMWARE, &ver->fw);
-	if (!ret)
-		ret = m5mols_read_u16(sd, SYSTEM_VER_HARDWARE, &ver->hw);
-	if (!ret)
-		ret = m5mols_read_u16(sd, SYSTEM_VER_PARAMETER, &ver->param);
-	if (!ret)
-		ret = m5mols_read_u16(sd, SYSTEM_VER_AWB, &ver->awb);
-	if (!ret)
-		ret = m5mols_read_u8(sd, AF_VERSION, &ver->af);
-	if (ret)
-		return ret;
-
-	for (i = 0; i < VERSION_STRING_SIZE; i++) {
-		ret = m5mols_read_u8(sd, SYSTEM_VER_STRING, &str[i]);
-		if (ret)
-			return ret;
-	}
-
-	ver->fw = be16_to_cpu(ver->fw);
-	ver->hw = be16_to_cpu(ver->hw);
-	ver->param = be16_to_cpu(ver->param);
-	ver->awb = be16_to_cpu(ver->awb);
-
-	v4l2_info(sd, "Manufacturer\t[%s]\n",
-			is_manufacturer(info, REG_SAMSUNG_ELECTRO) ?
-			"Samsung Electro-Machanics" :
-			is_manufacturer(info, REG_SAMSUNG_OPTICS) ?
-			"Samsung Fiber-Optics" :
-			is_manufacturer(info, REG_SAMSUNG_TECHWIN) ?
-			"Samsung Techwin" : "None");
-	v4l2_info(sd, "Customer/Project\t[0x%02x/0x%02x]\n",
-			info->ver.customer, info->ver.project);
-
-	if (!is_available_af(info))
-		v4l2_info(sd, "No support Auto Focus on this firmware\n");
-
-	return ret;
-}
-
-/**
- * __find_restype - Lookup M-5MOLS resolution type according to pixel code
- * @code: pixel code
- */
-static enum m5mols_restype __find_restype(enum v4l2_mbus_pixelcode code)
-{
-	enum m5mols_restype type = M5MOLS_RESTYPE_MONITOR;
-
-	do {
-		if (code == m5mols_default_ffmt[type].code)
-			return type;
-	} while (type++ != SIZE_DEFAULT_FFMT);
-
-	return 0;
-}
-
-/**
- * __find_resolution - Lookup preset and type of M-5MOLS's resolution
- * @mf: pixel format to find/negotiate the resolution preset for
- * @type: M-5MOLS resolution type
- * @resolution:	M-5MOLS resolution preset register value
- *
- * Find nearest resolution matching resolution preset and adjust mf
- * to supported values.
- */
-static int __find_resolution(struct v4l2_subdev *sd,
-			     struct v4l2_mbus_framefmt *mf,
-			     enum m5mols_restype *type,
-			     u32 *resolution)
-{
-	const struct m5mols_resolution *fsize = &m5mols_reg_res[0];
-	const struct m5mols_resolution *match = NULL;
-	enum m5mols_restype stype = __find_restype(mf->code);
-	int i = ARRAY_SIZE(m5mols_reg_res);
-	unsigned int min_err = ~0;
-
-	while (i--) {
-		int err;
-		if (stype == fsize->type) {
-			err = abs(fsize->width - mf->width)
-				+ abs(fsize->height - mf->height);
-
-			if (err < min_err) {
-				min_err = err;
-				match = fsize;
-			}
-		}
-		fsize++;
-	}
-	if (match) {
-		mf->width  = match->width;
-		mf->height = match->height;
-		*resolution = match->reg;
-		*type = stype;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-static struct v4l2_mbus_framefmt *__find_format(struct m5mols_info *info,
-				struct v4l2_subdev_fh *fh,
-				enum v4l2_subdev_format_whence which,
-				enum m5mols_restype type)
-{
-	if (which == V4L2_SUBDEV_FORMAT_TRY)
-		return fh ? v4l2_subdev_get_try_format(fh, 0) : NULL;
-
-	return &info->ffmt[type];
-}
-
-static int m5mols_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
-			  struct v4l2_subdev_format *fmt)
-{
-	struct m5mols_info *info = to_m5mols(sd);
-	struct v4l2_mbus_framefmt *format;
-
-	format = __find_format(info, fh, fmt->which, info->res_type);
-	if (!format)
-		return -EINVAL;
-
-	fmt->format = *format;
-	return 0;
-}
-
-static int m5mols_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
-			  struct v4l2_subdev_format *fmt)
-{
-	struct m5mols_info *info = to_m5mols(sd);
-	struct v4l2_mbus_framefmt *format = &fmt->format;
-	struct v4l2_mbus_framefmt *sfmt;
-	enum m5mols_restype type;
-	u32 resolution = 0;
-	int ret;
-
-	ret = __find_resolution(sd, format, &type, &resolution);
-	if (ret < 0)
-		return ret;
-
-	sfmt = __find_format(info, fh, fmt->which, type);
-	if (!sfmt)
-		return 0;
-
-
-	format->code = m5mols_default_ffmt[type].code;
-	format->colorspace = V4L2_COLORSPACE_JPEG;
-	format->field = V4L2_FIELD_NONE;
-
-	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		*sfmt = *format;
-		info->resolution = resolution;
-		info->res_type = type;
-	}
-
-	return 0;
-}
-
-static int m5mols_enum_mbus_code(struct v4l2_subdev *sd,
-				 struct v4l2_subdev_fh *fh,
-				 struct v4l2_subdev_mbus_code_enum *code)
-{
-	if (!code || code->index >= SIZE_DEFAULT_FFMT)
-		return -EINVAL;
-
-	code->code = m5mols_default_ffmt[code->index].code;
-
-	return 0;
-}
-
-static struct v4l2_subdev_pad_ops m5mols_pad_ops = {
-	.enum_mbus_code	= m5mols_enum_mbus_code,
-	.get_fmt	= m5mols_get_fmt,
-	.set_fmt	= m5mols_set_fmt,
-};
-
-/**
- * m5mols_restore_controls - Apply current control values to the registers
- *
- * m5mols_do_scenemode() handles all parameters for which there is yet no
- * individual control. It should be replaced at some point by setting each
- * control individually, in required register set up order.
- */
-int m5mols_restore_controls(struct m5mols_info *info)
-{
-	int ret;
-
-	if (info->ctrl_sync)
-		return 0;
-
-	ret = m5mols_do_scenemode(info, REG_SCENE_NORMAL);
-	if (ret)
-		return ret;
-
-	ret = v4l2_ctrl_handler_setup(&info->handle);
-	info->ctrl_sync = !ret;
-
-	return ret;
-}
-
-/**
- * m5mols_start_monitor - Start the monitor mode
- *
- * Before applying the controls setup the resolution and frame rate
- * in PARAMETER mode, and then switch over to MONITOR mode.
- */
-static int m5mols_start_monitor(struct m5mols_info *info)
-{
-	struct v4l2_subdev *sd = &info->sd;
-	int ret;
-
-	ret = m5mols_set_mode(info, REG_PARAMETER);
-	if (!ret)
-		ret = m5mols_write(sd, PARM_MON_SIZE, info->resolution);
-	if (!ret)
-		ret = m5mols_write(sd, PARM_MON_FPS, REG_FPS_30);
-	if (!ret)
-		ret = m5mols_set_mode(info, REG_MONITOR);
-	if (!ret)
-		ret = m5mols_restore_controls(info);
-
-	return ret;
-}
-
-static int m5mols_s_stream(struct v4l2_subdev *sd, int enable)
-{
-	struct m5mols_info *info = to_m5mols(sd);
-	u32 code = info->ffmt[info->res_type].code;
-
-	if (enable) {
-		int ret = -EINVAL;
-
-		if (is_code(code, M5MOLS_RESTYPE_MONITOR))
-			ret = m5mols_start_monitor(info);
-		if (is_code(code, M5MOLS_RESTYPE_CAPTURE))
-			ret = m5mols_start_capture(info);
-
-		return ret;
-	}
-
-	return m5mols_set_mode(info, REG_PARAMETER);
-}
-
-static const struct v4l2_subdev_video_ops m5mols_video_ops = {
-	.s_stream	= m5mols_s_stream,
-};
-
-static int m5mols_sensor_power(struct m5mols_info *info, bool enable)
-{
-	struct v4l2_subdev *sd = &info->sd;
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	const struct m5mols_platform_data *pdata = info->pdata;
-	int ret;
-
-	if (info->power == enable)
-		return 0;
-
-	if (enable) {
-		if (info->set_power) {
-			ret = info->set_power(&client->dev, 1);
-			if (ret)
-				return ret;
-		}
-
-		ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies);
-		if (ret) {
-			info->set_power(&client->dev, 0);
-			return ret;
-		}
-
-		gpio_set_value(pdata->gpio_reset, !pdata->reset_polarity);
-		info->power = 1;
-
-		return ret;
-	}
-
-	ret = regulator_bulk_disable(ARRAY_SIZE(supplies), supplies);
-	if (ret)
-		return ret;
-
-	if (info->set_power)
-		info->set_power(&client->dev, 0);
-
-	gpio_set_value(pdata->gpio_reset, pdata->reset_polarity);
-
-	info->isp_ready = 0;
-	info->power = 0;
-
-	return ret;
-}
-
-/* m5mols_update_fw - optional firmware update routine */
-int __attribute__ ((weak)) m5mols_update_fw(struct v4l2_subdev *sd,
-		int (*set_power)(struct m5mols_info *, bool))
-{
-	return 0;
-}
-
-/**
- * m5mols_fw_start - M-5MOLS internal ARM controller initialization
- *
- * Execute the M-5MOLS internal ARM controller initialization sequence.
- * This function should be called after the supply voltage has been
- * applied and before any requests to the device are made.
- */
-static int m5mols_fw_start(struct v4l2_subdev *sd)
-{
-	struct m5mols_info *info = to_m5mols(sd);
-	int ret;
-
-	atomic_set(&info->irq_done, 0);
-	/* Wait until I2C slave is initialized in Flash Writer mode */
-	ret = m5mols_busy_wait(sd, FLASH_CAM_START, REG_IN_FLASH_MODE,
-			       M5MOLS_I2C_RDY_WAIT_FL | 0xff, -1);
-	if (!ret)
-		ret = m5mols_write(sd, FLASH_CAM_START, REG_START_ARM_BOOT);
-	if (!ret)
-		ret = m5mols_wait_interrupt(sd, REG_INT_MODE, 2000);
-	if (ret < 0)
-		return ret;
-
-	info->isp_ready = 1;
-
-	ret = m5mols_get_version(sd);
-	if (!ret)
-		ret = m5mols_update_fw(sd, m5mols_sensor_power);
-	if (ret)
-		return ret;
-
-	v4l2_dbg(1, m5mols_debug, sd, "Success ARM Booting\n");
-
-	ret = m5mols_write(sd, PARM_INTERFACE, REG_INTERFACE_MIPI);
-	if (!ret)
-		ret = m5mols_enable_interrupt(sd,
-				REG_INT_AF | REG_INT_CAPTURE);
-
-	return ret;
-}
-
-/**
- * m5mols_s_power - Main sensor power control function
- *
- * To prevent breaking the lens when the sensor is powered off the Soft-Landing
- * algorithm is called where available. The Soft-Landing algorithm availability
- * dependends on the firmware provider.
- */
-static int m5mols_s_power(struct v4l2_subdev *sd, int on)
-{
-	struct m5mols_info *info = to_m5mols(sd);
-	int ret;
-
-	if (on) {
-		ret = m5mols_sensor_power(info, true);
-		if (!ret)
-			ret = m5mols_fw_start(sd);
-		return ret;
-	}
-
-	if (is_manufacturer(info, REG_SAMSUNG_TECHWIN)) {
-		ret = m5mols_set_mode(info, REG_MONITOR);
-		if (!ret)
-			ret = m5mols_write(sd, AF_EXECUTE, REG_AF_STOP);
-		if (!ret)
-			ret = m5mols_write(sd, AF_MODE, REG_AF_POWEROFF);
-		if (!ret)
-			ret = m5mols_busy_wait(sd, SYSTEM_STATUS, REG_AF_IDLE,
-					       0xff, -1);
-		if (ret < 0)
-			v4l2_warn(sd, "Soft landing lens failed\n");
-	}
-
-	ret = m5mols_sensor_power(info, false);
-	info->ctrl_sync = 0;
-
-	return ret;
-}
-
-static int m5mols_log_status(struct v4l2_subdev *sd)
-{
-	struct m5mols_info *info = to_m5mols(sd);
-
-	v4l2_ctrl_handler_log_status(&info->handle, sd->name);
-
-	return 0;
-}
-
-static const struct v4l2_subdev_core_ops m5mols_core_ops = {
-	.s_power	= m5mols_s_power,
-	.g_ctrl		= v4l2_subdev_g_ctrl,
-	.s_ctrl		= v4l2_subdev_s_ctrl,
-	.queryctrl	= v4l2_subdev_queryctrl,
-	.querymenu	= v4l2_subdev_querymenu,
-	.g_ext_ctrls	= v4l2_subdev_g_ext_ctrls,
-	.try_ext_ctrls	= v4l2_subdev_try_ext_ctrls,
-	.s_ext_ctrls	= v4l2_subdev_s_ext_ctrls,
-	.log_status	= m5mols_log_status,
-};
-
-/*
- * V4L2 subdev internal operations
- */
-static int m5mols_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-{
-	struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh, 0);
-
-	*format = m5mols_default_ffmt[0];
-	return 0;
-}
-
-static const struct v4l2_subdev_internal_ops m5mols_subdev_internal_ops = {
-	.open		= m5mols_open,
-};
-
-static const struct v4l2_subdev_ops m5mols_ops = {
-	.core		= &m5mols_core_ops,
-	.pad		= &m5mols_pad_ops,
-	.video		= &m5mols_video_ops,
-};
-
-static irqreturn_t m5mols_irq_handler(int irq, void *data)
-{
-	struct m5mols_info *info = to_m5mols(data);
-
-	atomic_set(&info->irq_done, 1);
-	wake_up_interruptible(&info->irq_waitq);
-
-	return IRQ_HANDLED;
-}
-
-static int __devinit m5mols_probe(struct i2c_client *client,
-				  const struct i2c_device_id *id)
-{
-	const struct m5mols_platform_data *pdata = client->dev.platform_data;
-	struct m5mols_info *info;
-	struct v4l2_subdev *sd;
-	int ret;
-
-	if (pdata == NULL) {
-		dev_err(&client->dev, "No platform data\n");
-		return -EINVAL;
-	}
-
-	if (!gpio_is_valid(pdata->gpio_reset)) {
-		dev_err(&client->dev, "No valid RESET GPIO specified\n");
-		return -EINVAL;
-	}
-
-	if (!client->irq) {
-		dev_err(&client->dev, "Interrupt not assigned\n");
-		return -EINVAL;
-	}
-
-	info = kzalloc(sizeof(struct m5mols_info), GFP_KERNEL);
-	if (!info)
-		return -ENOMEM;
-
-	info->pdata = pdata;
-	info->set_power	= pdata->set_power;
-
-	ret = gpio_request(pdata->gpio_reset, "M5MOLS_NRST");
-	if (ret) {
-		dev_err(&client->dev, "Failed to request gpio: %d\n", ret);
-		goto out_free;
-	}
-	gpio_direction_output(pdata->gpio_reset, pdata->reset_polarity);
-
-	ret = regulator_bulk_get(&client->dev, ARRAY_SIZE(supplies), supplies);
-	if (ret) {
-		dev_err(&client->dev, "Failed to get regulators: %d\n", ret);
-		goto out_gpio;
-	}
-
-	sd = &info->sd;
-	v4l2_i2c_subdev_init(sd, client, &m5mols_ops);
-	strlcpy(sd->name, MODULE_NAME, sizeof(sd->name));
-	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
-
-	sd->internal_ops = &m5mols_subdev_internal_ops;
-	info->pad.flags = MEDIA_PAD_FL_SOURCE;
-	ret = media_entity_init(&sd->entity, 1, &info->pad, 0);
-	if (ret < 0)
-		goto out_reg;
-	sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR;
-
-	init_waitqueue_head(&info->irq_waitq);
-	ret = request_irq(client->irq, m5mols_irq_handler,
-			  IRQF_TRIGGER_RISING, MODULE_NAME, sd);
-	if (ret) {
-		dev_err(&client->dev, "Interrupt request failed: %d\n", ret);
-		goto out_me;
-	}
-	info->res_type = M5MOLS_RESTYPE_MONITOR;
-	info->ffmt[0] = m5mols_default_ffmt[0];
-	info->ffmt[1] =	m5mols_default_ffmt[1];
-
-	ret = m5mols_sensor_power(info, true);
-	if (ret)
-		goto out_me;
-
-	ret = m5mols_fw_start(sd);
-	if (!ret)
-		ret = m5mols_init_controls(sd);
-
-	m5mols_sensor_power(info, false);
-	if (!ret)
-		return 0;
-out_me:
-	media_entity_cleanup(&sd->entity);
-out_reg:
-	regulator_bulk_free(ARRAY_SIZE(supplies), supplies);
-out_gpio:
-	gpio_free(pdata->gpio_reset);
-out_free:
-	kfree(info);
-	return ret;
-}
-
-static int __devexit m5mols_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct m5mols_info *info = to_m5mols(sd);
-
-	v4l2_device_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(sd->ctrl_handler);
-	free_irq(client->irq, sd);
-
-	regulator_bulk_free(ARRAY_SIZE(supplies), supplies);
-	gpio_free(info->pdata->gpio_reset);
-	media_entity_cleanup(&sd->entity);
-	kfree(info);
-	return 0;
-}
-
-static const struct i2c_device_id m5mols_id[] = {
-	{ MODULE_NAME, 0 },
-	{ },
-};
-MODULE_DEVICE_TABLE(i2c, m5mols_id);
-
-static struct i2c_driver m5mols_i2c_driver = {
-	.driver = {
-		.name	= MODULE_NAME,
-	},
-	.probe		= m5mols_probe,
-	.remove		= __devexit_p(m5mols_remove),
-	.id_table	= m5mols_id,
-};
-
-module_i2c_driver(m5mols_i2c_driver);
-
-MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>");
-MODULE_AUTHOR("Dongsoo Kim <dongsoo45.kim@samsung.com>");
-MODULE_DESCRIPTION("Fujitsu M-5MOLS 8M Pixel camera driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/m5mols/m5mols_reg.h b/drivers/media/video/m5mols/m5mols_reg.h
deleted file mode 100644
index 14d4be7..0000000
--- a/drivers/media/video/m5mols/m5mols_reg.h
+++ /dev/null
@@ -1,362 +0,0 @@
-/*
- * Register map for M-5MOLS 8M Pixel camera sensor with ISP
- *
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- * Author: HeungJun Kim <riverful.kim@samsung.com>
- *
- * Copyright (C) 2009 Samsung Electronics Co., Ltd.
- * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef M5MOLS_REG_H
-#define M5MOLS_REG_H
-
-#define M5MOLS_I2C_MAX_SIZE	4
-#define M5MOLS_BYTE_READ	0x01
-#define M5MOLS_BYTE_WRITE	0x02
-
-#define I2C_CATEGORY(__cat)		((__cat >> 16) & 0xff)
-#define I2C_COMMAND(__comm)		((__comm >> 8) & 0xff)
-#define I2C_SIZE(__reg_s)		((__reg_s) & 0xff)
-#define I2C_REG(__cat, __cmd, __reg_s)	((__cat << 16) | (__cmd << 8) | __reg_s)
-
-/*
- * Category section register
- *
- * The category means set including relevant command of M-5MOLS.
- */
-#define CAT_SYSTEM		0x00
-#define CAT_PARAM		0x01
-#define CAT_MONITOR		0x02
-#define CAT_AE			0x03
-#define CAT_WB			0x06
-#define CAT_EXIF		0x07
-#define CAT_FD			0x09
-#define CAT_LENS		0x0a
-#define CAT_CAPT_PARM		0x0b
-#define CAT_CAPT_CTRL		0x0c
-#define CAT_FLASH		0x0f	/* related to FW, revisions, booting */
-
-/*
- * Category 0 - SYSTEM mode
- *
- * The SYSTEM mode in the M-5MOLS means area available to handle with the whole
- * & all-round system of sensor. It deals with version/interrupt/setting mode &
- * even sensor's status. Especially, the M-5MOLS sensor with ISP varies by
- * packaging & manufacturer, even the customer and project code. And the
- * function details may vary among them. The version information helps to
- * determine what methods shall be used in the driver.
- *
- * There is many registers between customer version address and awb one. For
- * more specific contents, see definition if file m5mols.h.
- */
-#define SYSTEM_VER_CUSTOMER	I2C_REG(CAT_SYSTEM, 0x00, 1)
-#define SYSTEM_VER_PROJECT	I2C_REG(CAT_SYSTEM, 0x01, 1)
-#define SYSTEM_VER_FIRMWARE	I2C_REG(CAT_SYSTEM, 0x02, 2)
-#define SYSTEM_VER_HARDWARE	I2C_REG(CAT_SYSTEM, 0x04, 2)
-#define SYSTEM_VER_PARAMETER	I2C_REG(CAT_SYSTEM, 0x06, 2)
-#define SYSTEM_VER_AWB		I2C_REG(CAT_SYSTEM, 0x08, 2)
-
-#define SYSTEM_SYSMODE		I2C_REG(CAT_SYSTEM, 0x0b, 1)
-#define REG_SYSINIT		0x00	/* SYSTEM mode */
-#define REG_PARAMETER		0x01	/* PARAMETER mode */
-#define REG_MONITOR		0x02	/* MONITOR mode */
-#define REG_CAPTURE		0x03	/* CAPTURE mode */
-
-#define SYSTEM_CMD(__cmd)	I2C_REG(CAT_SYSTEM, cmd, 1)
-#define SYSTEM_VER_STRING	I2C_REG(CAT_SYSTEM, 0x0a, 1)
-#define REG_SAMSUNG_ELECTRO	"SE"	/* Samsung Electro-Mechanics */
-#define REG_SAMSUNG_OPTICS	"OP"	/* Samsung Fiber-Optics */
-#define REG_SAMSUNG_TECHWIN	"TB"	/* Samsung Techwin */
-/* SYSTEM mode status */
-#define SYSTEM_STATUS	I2C_REG(CAT_SYSTEM, 0x0c, 1)
-
-/* Interrupt pending register */
-#define SYSTEM_INT_FACTOR	I2C_REG(CAT_SYSTEM, 0x10, 1)
-/* interrupt enable register */
-#define SYSTEM_INT_ENABLE	I2C_REG(CAT_SYSTEM, 0x11, 1)
-#define REG_INT_MODE		(1 << 0)
-#define REG_INT_AF		(1 << 1)
-#define REG_INT_ZOOM		(1 << 2)
-#define REG_INT_CAPTURE		(1 << 3)
-#define REG_INT_FRAMESYNC	(1 << 4)
-#define REG_INT_FD		(1 << 5)
-#define REG_INT_LENS_INIT	(1 << 6)
-#define REG_INT_SOUND		(1 << 7)
-#define REG_INT_MASK		0x0f
-
-/*
- * category 1 - PARAMETER mode
- *
- * This category supports function of camera features of M-5MOLS. It means we
- * can handle with preview(MONITOR) resolution size/frame per second/interface
- * between the sensor and the Application Processor/even the image effect.
- */
-
-/* Resolution in the MONITOR mode */
-#define PARM_MON_SIZE		I2C_REG(CAT_PARAM, 0x01, 1)
-
-/* Frame rate */
-#define PARM_MON_FPS		I2C_REG(CAT_PARAM, 0x02, 1)
-#define REG_FPS_30		0x02
-
-/* Video bus between the sensor and a host processor */
-#define PARM_INTERFACE		I2C_REG(CAT_PARAM, 0x00, 1)
-#define REG_INTERFACE_MIPI	0x02
-
-/* Image effects */
-#define PARM_EFFECT		I2C_REG(CAT_PARAM, 0x0b, 1)
-#define REG_EFFECT_OFF		0x00
-#define REG_EFFECT_NEGA		0x01
-#define REG_EFFECT_EMBOSS	0x06
-#define REG_EFFECT_OUTLINE	0x07
-#define REG_EFFECT_WATERCOLOR	0x08
-
-/*
- * Category 2 - MONITOR mode
- *
- * The MONITOR mode is same as preview mode as we said. The M-5MOLS has another
- * mode named "Preview", but this preview mode is used at the case specific
- * vider-recording mode. This mmode supports only YUYV format. On the other
- * hand, the JPEG & RAW formats is supports by CAPTURE mode. And, there are
- * another options like zoom/color effect(different with effect in PARAMETER
- * mode)/anti hand shaking algorithm.
- */
-
-/* Target digital zoom position */
-#define MON_ZOOM		I2C_REG(CAT_MONITOR, 0x01, 1)
-
-/* CR value for color effect */
-#define MON_CFIXR		I2C_REG(CAT_MONITOR, 0x0a, 1)
-/* CB value for color effect */
-#define MON_CFIXB		I2C_REG(CAT_MONITOR, 0x09, 1)
-#define REG_CFIXB_SEPIA		0xd8
-#define REG_CFIXR_SEPIA		0x18
-
-#define MON_EFFECT		I2C_REG(CAT_MONITOR, 0x0b, 1)
-#define REG_COLOR_EFFECT_OFF	0x00
-#define REG_COLOR_EFFECT_ON	0x01
-
-/* Chroma enable */
-#define MON_CHROMA_EN		I2C_REG(CAT_MONITOR, 0x10, 1)
-/* Chroma level */
-#define MON_CHROMA_LVL		I2C_REG(CAT_MONITOR, 0x0f, 1)
-#define REG_CHROMA_OFF		0x00
-#define REG_CHROMA_ON		0x01
-
-/* Sharpness on/off */
-#define MON_EDGE_EN		I2C_REG(CAT_MONITOR, 0x12, 1)
-/* Sharpness level */
-#define MON_EDGE_LVL		I2C_REG(CAT_MONITOR, 0x11, 1)
-#define REG_EDGE_OFF		0x00
-#define REG_EDGE_ON		0x01
-
-/* Set color tone (contrast) */
-#define MON_TONE_CTL		I2C_REG(CAT_MONITOR, 0x25, 1)
-
-/*
- * Category 3 - Auto Exposure
- *
- * The M-5MOLS exposure capbility is detailed as which is similar to digital
- * camera. This category supports AE locking/various AE mode(range of exposure)
- * /ISO/flickering/EV bias/shutter/meteoring, and anything else. And the
- * maximum/minimum exposure gain value depending on M-5MOLS firmware, may be
- * different. So, this category also provide getting the max/min values. And,
- * each MONITOR and CAPTURE mode has each gain/shutter/max exposure values.
- */
-
-/* Auto Exposure locking */
-#define AE_LOCK			I2C_REG(CAT_AE, 0x00, 1)
-#define REG_AE_UNLOCK		0x00
-#define REG_AE_LOCK		0x01
-
-/* Auto Exposure algorithm mode */
-#define AE_MODE			I2C_REG(CAT_AE, 0x01, 1)
-#define REG_AE_OFF		0x00	/* AE off */
-#define REG_AE_ALL		0x01	/* calc AE in all block integral */
-#define REG_AE_CENTER		0x03	/* calc AE in center weighted */
-#define REG_AE_SPOT		0x06	/* calc AE in specific spot */
-
-#define AE_ISO			I2C_REG(CAT_AE, 0x05, 1)
-#define REG_ISO_AUTO		0x00
-#define REG_ISO_50		0x01
-#define REG_ISO_100		0x02
-#define REG_ISO_200		0x03
-#define REG_ISO_400		0x04
-#define REG_ISO_800		0x05
-
-/* EV (scenemode) preset for MONITOR */
-#define AE_EV_PRESET_MONITOR	I2C_REG(CAT_AE, 0x0a, 1)
-/* EV (scenemode) preset for CAPTURE */
-#define AE_EV_PRESET_CAPTURE	I2C_REG(CAT_AE, 0x0b, 1)
-#define REG_SCENE_NORMAL	0x00
-#define REG_SCENE_PORTRAIT	0x01
-#define REG_SCENE_LANDSCAPE	0x02
-#define REG_SCENE_SPORTS	0x03
-#define REG_SCENE_PARTY_INDOOR	0x04
-#define REG_SCENE_BEACH_SNOW	0x05
-#define REG_SCENE_SUNSET	0x06
-#define REG_SCENE_DAWN_DUSK	0x07
-#define REG_SCENE_FALL		0x08
-#define REG_SCENE_NIGHT		0x09
-#define REG_SCENE_AGAINST_LIGHT	0x0a
-#define REG_SCENE_FIRE		0x0b
-#define REG_SCENE_TEXT		0x0c
-#define REG_SCENE_CANDLE	0x0d
-
-/* Manual gain in MONITOR mode */
-#define AE_MAN_GAIN_MON		I2C_REG(CAT_AE, 0x12, 2)
-/* Maximum gain in MONITOR mode */
-#define AE_MAX_GAIN_MON		I2C_REG(CAT_AE, 0x1a, 2)
-/* Manual gain in CAPTURE mode */
-#define AE_MAN_GAIN_CAP		I2C_REG(CAT_AE, 0x26, 2)
-
-#define AE_INDEX		I2C_REG(CAT_AE, 0x38, 1)
-#define REG_AE_INDEX_20_NEG	0x00
-#define REG_AE_INDEX_15_NEG	0x01
-#define REG_AE_INDEX_10_NEG	0x02
-#define REG_AE_INDEX_05_NEG	0x03
-#define REG_AE_INDEX_00		0x04
-#define REG_AE_INDEX_05_POS	0x05
-#define REG_AE_INDEX_10_POS	0x06
-#define REG_AE_INDEX_15_POS	0x07
-#define REG_AE_INDEX_20_POS	0x08
-
-/*
- * Category 6 - White Balance
- */
-
-/* Auto Whitebalance locking */
-#define AWB_LOCK		I2C_REG(CAT_WB, 0x00, 1)
-#define REG_AWB_UNLOCK		0x00
-#define REG_AWB_LOCK		0x01
-
-#define AWB_MODE		I2C_REG(CAT_WB, 0x02, 1)
-#define REG_AWB_AUTO		0x01	/* AWB off */
-#define REG_AWB_PRESET		0x02	/* AWB preset */
-
-/* Manual WB (preset) */
-#define AWB_MANUAL		I2C_REG(CAT_WB, 0x03, 1)
-#define REG_AWB_INCANDESCENT	0x01
-#define REG_AWB_FLUORESCENT_1	0x02
-#define REG_AWB_FLUORESCENT_2	0x03
-#define REG_AWB_DAYLIGHT	0x04
-#define REG_AWB_CLOUDY		0x05
-#define REG_AWB_SHADE		0x06
-#define REG_AWB_HORIZON		0x07
-#define REG_AWB_LEDLIGHT	0x09
-
-/*
- * Category 7 - EXIF information
- */
-#define EXIF_INFO_EXPTIME_NU	I2C_REG(CAT_EXIF, 0x00, 4)
-#define EXIF_INFO_EXPTIME_DE	I2C_REG(CAT_EXIF, 0x04, 4)
-#define EXIF_INFO_TV_NU		I2C_REG(CAT_EXIF, 0x08, 4)
-#define EXIF_INFO_TV_DE		I2C_REG(CAT_EXIF, 0x0c, 4)
-#define EXIF_INFO_AV_NU		I2C_REG(CAT_EXIF, 0x10, 4)
-#define EXIF_INFO_AV_DE		I2C_REG(CAT_EXIF, 0x14, 4)
-#define EXIF_INFO_BV_NU		I2C_REG(CAT_EXIF, 0x18, 4)
-#define EXIF_INFO_BV_DE		I2C_REG(CAT_EXIF, 0x1c, 4)
-#define EXIF_INFO_EBV_NU	I2C_REG(CAT_EXIF, 0x20, 4)
-#define EXIF_INFO_EBV_DE	I2C_REG(CAT_EXIF, 0x24, 4)
-#define EXIF_INFO_ISO		I2C_REG(CAT_EXIF, 0x28, 2)
-#define EXIF_INFO_FLASH		I2C_REG(CAT_EXIF, 0x2a, 2)
-#define EXIF_INFO_SDR		I2C_REG(CAT_EXIF, 0x2c, 2)
-#define EXIF_INFO_QVAL		I2C_REG(CAT_EXIF, 0x2e, 2)
-
-/*
- * Category 9 - Face Detection
- */
-#define FD_CTL			I2C_REG(CAT_FD, 0x00, 1)
-#define BIT_FD_EN		0
-#define BIT_FD_DRAW_FACE_FRAME	4
-#define BIT_FD_DRAW_SMILE_LVL	6
-#define REG_FD(shift)		(1 << shift)
-#define REG_FD_OFF		0x0
-
-/*
- * Category A - Lens Parameter
- */
-#define AF_MODE			I2C_REG(CAT_LENS, 0x01, 1)
-#define REG_AF_NORMAL		0x00	/* Normal AF, one time */
-#define REG_AF_MACRO		0x01	/* Macro AF, one time */
-#define REG_AF_POWEROFF		0x07
-
-#define AF_EXECUTE		I2C_REG(CAT_LENS, 0x02, 1)
-#define REG_AF_STOP		0x00
-#define REG_AF_EXE_AUTO		0x01
-#define REG_AF_EXE_CAF		0x02
-
-#define AF_STATUS		I2C_REG(CAT_LENS, 0x03, 1)
-#define REG_AF_FAIL		0x00
-#define REG_AF_SUCCESS		0x02
-#define REG_AF_IDLE		0x04
-#define REG_AF_BUSY		0x05
-
-#define AF_VERSION		I2C_REG(CAT_LENS, 0x0a, 1)
-
-/*
- * Category B - CAPTURE Parameter
- */
-#define CAPP_YUVOUT_MAIN	I2C_REG(CAT_CAPT_PARM, 0x00, 1)
-#define REG_YUV422		0x00
-#define REG_BAYER10		0x05
-#define REG_BAYER8		0x06
-#define REG_JPEG		0x10
-
-#define CAPP_MAIN_IMAGE_SIZE	I2C_REG(CAT_CAPT_PARM, 0x01, 1)
-#define CAPP_JPEG_RATIO		I2C_REG(CAT_CAPT_PARM, 0x17, 1)
-
-#define CAPP_MCC_MODE		I2C_REG(CAT_CAPT_PARM, 0x1d, 1)
-#define REG_MCC_OFF		0x00
-#define REG_MCC_NORMAL		0x01
-
-#define CAPP_WDR_EN		I2C_REG(CAT_CAPT_PARM, 0x2c, 1)
-#define REG_WDR_OFF		0x00
-#define REG_WDR_ON		0x01
-#define REG_WDR_AUTO		0x02
-
-#define CAPP_LIGHT_CTRL		I2C_REG(CAT_CAPT_PARM, 0x40, 1)
-#define REG_LIGHT_OFF		0x00
-#define REG_LIGHT_ON		0x01
-#define REG_LIGHT_AUTO		0x02
-
-#define CAPP_FLASH_CTRL		I2C_REG(CAT_CAPT_PARM, 0x41, 1)
-#define REG_FLASH_OFF		0x00
-#define REG_FLASH_ON		0x01
-#define REG_FLASH_AUTO		0x02
-
-/*
- * Category C - CAPTURE Control
- */
-#define CAPC_MODE		I2C_REG(CAT_CAPT_CTRL, 0x00, 1)
-#define REG_CAP_NONE		0x00
-#define REG_CAP_ANTI_SHAKE	0x02
-
-/* Select single- or multi-shot capture */
-#define CAPC_SEL_FRAME		I2C_REG(CAT_CAPT_CTRL, 0x06, 1)
-
-#define CAPC_START		I2C_REG(CAT_CAPT_CTRL, 0x09, 1)
-#define REG_CAP_START_MAIN	0x01
-#define REG_CAP_START_THUMB	0x03
-
-#define CAPC_IMAGE_SIZE		I2C_REG(CAT_CAPT_CTRL, 0x0d, 4)
-#define CAPC_THUMB_SIZE		I2C_REG(CAT_CAPT_CTRL, 0x11, 4)
-
-/*
- * Category F - Flash
- *
- * This mode provides functions about internal flash stuff and system startup.
- */
-
-/* Starts internal ARM core booting after power-up */
-#define FLASH_CAM_START		I2C_REG(CAT_FLASH, 0x12, 1)
-#define REG_START_ARM_BOOT	0x01	/* write value */
-#define REG_IN_FLASH_MODE	0x00	/* read value */
-
-#endif	/* M5MOLS_REG_H */
diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c
deleted file mode 100644
index aeb22be..0000000
--- a/drivers/media/video/msp3400-driver.c
+++ /dev/null
@@ -1,899 +0,0 @@
-/*
- * Programming the mspx4xx sound processor family
- *
- * (c) 1997-2001 Gerd Knorr <kraxel@bytesex.org>
- *
- * what works and what doesn't:
- *
- *  AM-Mono
- *      Support for Hauppauge cards added (decoding handled by tuner) added by
- *      Frederic Crozat <fcrozat@mail.dotcom.fr>
- *
- *  FM-Mono
- *      should work. The stereo modes are backward compatible to FM-mono,
- *      therefore FM-Mono should be allways available.
- *
- *  FM-Stereo (B/G, used in germany)
- *      should work, with autodetect
- *
- *  FM-Stereo (satellite)
- *      should work, no autodetect (i.e. default is mono, but you can
- *      switch to stereo -- untested)
- *
- *  NICAM (B/G, L , used in UK, Scandinavia, Spain and France)
- *      should work, with autodetect. Support for NICAM was added by
- *      Pekka Pietikainen <pp@netppl.fi>
- *
- * TODO:
- *   - better SAT support
- *
- * 980623  Thomas Sailer (sailer@ife.ee.ethz.ch)
- *         using soundcore instead of OSS
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/kthread.h>
-#include <linux/freezer.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ioctl.h>
-#include <media/msp3400.h>
-#include <media/tvaudio.h>
-#include "msp3400-driver.h"
-
-/* ---------------------------------------------------------------------- */
-
-MODULE_DESCRIPTION("device driver for msp34xx TV sound processor");
-MODULE_AUTHOR("Gerd Knorr");
-MODULE_LICENSE("GPL");
-
-/* module parameters */
-static int opmode   = OPMODE_AUTO;
-int msp_debug;		 /* msp_debug output */
-bool msp_once;		 /* no continuous stereo monitoring */
-bool msp_amsound;	 /* hard-wire AM sound at 6.5 Hz (france),
-			    the autoscan seems work well only with FM... */
-int msp_standard = 1;    /* Override auto detect of audio msp_standard,
-			    if needed. */
-bool msp_dolby;
-
-int msp_stereo_thresh = 0x190; /* a2 threshold for stereo/bilingual
-					(msp34xxg only) 0x00a0-0x03c0 */
-
-/* read-only */
-module_param(opmode,           int, 0444);
-
-/* read-write */
-module_param_named(once, msp_once,                      bool, 0644);
-module_param_named(debug, msp_debug,                    int,  0644);
-module_param_named(stereo_threshold, msp_stereo_thresh, int,  0644);
-module_param_named(standard, msp_standard,              int,  0644);
-module_param_named(amsound, msp_amsound,                bool, 0644);
-module_param_named(dolby, msp_dolby,                    bool, 0644);
-
-MODULE_PARM_DESC(opmode, "Forces a MSP3400 opmode. 0=Manual, 1=Autodetect, 2=Autodetect and autoselect");
-MODULE_PARM_DESC(once, "No continuous stereo monitoring");
-MODULE_PARM_DESC(debug, "Enable debug messages [0-3]");
-MODULE_PARM_DESC(stereo_threshold, "Sets signal threshold to activate stereo");
-MODULE_PARM_DESC(standard, "Specify audio standard: 32 = NTSC, 64 = radio, Default: Autodetect");
-MODULE_PARM_DESC(amsound, "Hardwire AM sound at 6.5Hz (France), FM can autoscan");
-MODULE_PARM_DESC(dolby, "Activates Dolby processing");
-
-/* ---------------------------------------------------------------------- */
-
-/* control subaddress */
-#define I2C_MSP_CONTROL 0x00
-/* demodulator unit subaddress */
-#define I2C_MSP_DEM     0x10
-/* DSP unit subaddress */
-#define I2C_MSP_DSP     0x12
-
-
-/* ----------------------------------------------------------------------- */
-/* functions for talking to the MSP3400C Sound processor                   */
-
-int msp_reset(struct i2c_client *client)
-{
-	/* reset and read revision code */
-	static u8 reset_off[3] = { I2C_MSP_CONTROL, 0x80, 0x00 };
-	static u8 reset_on[3]  = { I2C_MSP_CONTROL, 0x00, 0x00 };
-	static u8 write[3]     = { I2C_MSP_DSP + 1, 0x00, 0x1e };
-	u8 read[2];
-	struct i2c_msg reset[2] = {
-		{ client->addr, I2C_M_IGNORE_NAK, 3, reset_off },
-		{ client->addr, I2C_M_IGNORE_NAK, 3, reset_on  },
-	};
-	struct i2c_msg test[2] = {
-		{ client->addr, 0,        3, write },
-		{ client->addr, I2C_M_RD, 2, read  },
-	};
-
-	v4l_dbg(3, msp_debug, client, "msp_reset\n");
-	if (i2c_transfer(client->adapter, &reset[0], 1) != 1 ||
-	    i2c_transfer(client->adapter, &reset[1], 1) != 1 ||
-	    i2c_transfer(client->adapter, test, 2) != 2) {
-		v4l_err(client, "chip reset failed\n");
-		return -1;
-	}
-	return 0;
-}
-
-static int msp_read(struct i2c_client *client, int dev, int addr)
-{
-	int err, retval;
-	u8 write[3];
-	u8 read[2];
-	struct i2c_msg msgs[2] = {
-		{ client->addr, 0,        3, write },
-		{ client->addr, I2C_M_RD, 2, read  }
-	};
-
-	write[0] = dev + 1;
-	write[1] = addr >> 8;
-	write[2] = addr & 0xff;
-
-	for (err = 0; err < 3; err++) {
-		if (i2c_transfer(client->adapter, msgs, 2) == 2)
-			break;
-		v4l_warn(client, "I/O error #%d (read 0x%02x/0x%02x)\n", err,
-		       dev, addr);
-		schedule_timeout_interruptible(msecs_to_jiffies(10));
-	}
-	if (err == 3) {
-		v4l_warn(client, "resetting chip, sound will go off.\n");
-		msp_reset(client);
-		return -1;
-	}
-	retval = read[0] << 8 | read[1];
-	v4l_dbg(3, msp_debug, client, "msp_read(0x%x, 0x%x): 0x%x\n",
-			dev, addr, retval);
-	return retval;
-}
-
-int msp_read_dem(struct i2c_client *client, int addr)
-{
-	return msp_read(client, I2C_MSP_DEM, addr);
-}
-
-int msp_read_dsp(struct i2c_client *client, int addr)
-{
-	return msp_read(client, I2C_MSP_DSP, addr);
-}
-
-static int msp_write(struct i2c_client *client, int dev, int addr, int val)
-{
-	int err;
-	u8 buffer[5];
-
-	buffer[0] = dev;
-	buffer[1] = addr >> 8;
-	buffer[2] = addr &  0xff;
-	buffer[3] = val  >> 8;
-	buffer[4] = val  &  0xff;
-
-	v4l_dbg(3, msp_debug, client, "msp_write(0x%x, 0x%x, 0x%x)\n",
-			dev, addr, val);
-	for (err = 0; err < 3; err++) {
-		if (i2c_master_send(client, buffer, 5) == 5)
-			break;
-		v4l_warn(client, "I/O error #%d (write 0x%02x/0x%02x)\n", err,
-		       dev, addr);
-		schedule_timeout_interruptible(msecs_to_jiffies(10));
-	}
-	if (err == 3) {
-		v4l_warn(client, "resetting chip, sound will go off.\n");
-		msp_reset(client);
-		return -1;
-	}
-	return 0;
-}
-
-int msp_write_dem(struct i2c_client *client, int addr, int val)
-{
-	return msp_write(client, I2C_MSP_DEM, addr, val);
-}
-
-int msp_write_dsp(struct i2c_client *client, int addr, int val)
-{
-	return msp_write(client, I2C_MSP_DSP, addr, val);
-}
-
-/* ----------------------------------------------------------------------- *
- * bits  9  8  5 - SCART DSP input Select:
- *       0  0  0 - SCART 1 to DSP input (reset position)
- *       0  1  0 - MONO to DSP input
- *       1  0  0 - SCART 2 to DSP input
- *       1  1  1 - Mute DSP input
- *
- * bits 11 10  6 - SCART 1 Output Select:
- *       0  0  0 - undefined (reset position)
- *       0  1  0 - SCART 2 Input to SCART 1 Output (for devices with 2 SCARTS)
- *       1  0  0 - MONO input to SCART 1 Output
- *       1  1  0 - SCART 1 DA to SCART 1 Output
- *       0  0  1 - SCART 2 DA to SCART 1 Output
- *       0  1  1 - SCART 1 Input to SCART 1 Output
- *       1  1  1 - Mute SCART 1 Output
- *
- * bits 13 12  7 - SCART 2 Output Select (for devices with 2 Output SCART):
- *       0  0  0 - SCART 1 DA to SCART 2 Output (reset position)
- *       0  1  0 - SCART 1 Input to SCART 2 Output
- *       1  0  0 - MONO input to SCART 2 Output
- *       0  0  1 - SCART 2 DA to SCART 2 Output
- *       0  1  1 - SCART 2 Input to SCART 2 Output
- *       1  1  0 - Mute SCART 2 Output
- *
- * Bits 4 to 0 should be zero.
- * ----------------------------------------------------------------------- */
-
-static int scarts[3][9] = {
-	/* MASK   IN1     IN2     IN3     IN4     IN1_DA  IN2_DA  MONO    MUTE   */
-	/* SCART DSP Input select */
-	{ 0x0320, 0x0000, 0x0200, 0x0300, 0x0020, -1,     -1,     0x0100, 0x0320 },
-	/* SCART1 Output select */
-	{ 0x0c40, 0x0440, 0x0400, 0x0000, 0x0840, 0x0c00, 0x0040, 0x0800, 0x0c40 },
-	/* SCART2 Output select */
-	{ 0x3080, 0x1000, 0x1080, 0x2080, 0x3080, 0x0000, 0x0080, 0x2000, 0x3000 },
-};
-
-static char *scart_names[] = {
-	"in1", "in2", "in3", "in4", "in1 da", "in2 da", "mono", "mute"
-};
-
-void msp_set_scart(struct i2c_client *client, int in, int out)
-{
-	struct msp_state *state = to_state(i2c_get_clientdata(client));
-
-	state->in_scart = in;
-
-	if (in >= 0 && in <= 7 && out >= 0 && out <= 2) {
-		if (-1 == scarts[out][in + 1])
-			return;
-
-		state->acb &= ~scarts[out][0];
-		state->acb |=  scarts[out][in + 1];
-	} else
-		state->acb = 0xf60; /* Mute Input and SCART 1 Output */
-
-	v4l_dbg(1, msp_debug, client, "scart switch: %s => %d (ACB=0x%04x)\n",
-					scart_names[in], out, state->acb);
-	msp_write_dsp(client, 0x13, state->acb);
-
-	/* Sets I2S speed 0 = 1.024 Mbps, 1 = 2.048 Mbps */
-	if (state->has_i2s_conf)
-		msp_write_dem(client, 0x40, state->i2s_mode);
-}
-
-/* ------------------------------------------------------------------------ */
-
-static void msp_wake_thread(struct i2c_client *client)
-{
-	struct msp_state *state = to_state(i2c_get_clientdata(client));
-
-	if (NULL == state->kthread)
-		return;
-	state->watch_stereo = 0;
-	state->restart = 1;
-	wake_up_interruptible(&state->wq);
-}
-
-int msp_sleep(struct msp_state *state, int timeout)
-{
-	DECLARE_WAITQUEUE(wait, current);
-
-	add_wait_queue(&state->wq, &wait);
-	if (!kthread_should_stop()) {
-		if (timeout < 0) {
-			set_current_state(TASK_INTERRUPTIBLE);
-			schedule();
-		} else {
-			schedule_timeout_interruptible
-						(msecs_to_jiffies(timeout));
-		}
-	}
-
-	remove_wait_queue(&state->wq, &wait);
-	try_to_freeze();
-	return state->restart;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int msp_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct msp_state *state = ctrl_to_state(ctrl);
-	struct i2c_client *client = v4l2_get_subdevdata(&state->sd);
-	int val = ctrl->val;
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_VOLUME: {
-		/* audio volume cluster */
-		int reallymuted = state->muted->val | state->scan_in_progress;
-
-		if (!reallymuted)
-			val = (val * 0x7f / 65535) << 8;
-
-		v4l_dbg(1, msp_debug, client, "mute=%s scanning=%s volume=%d\n",
-				state->muted->val ? "on" : "off",
-				state->scan_in_progress ? "yes" : "no",
-				state->volume->val);
-
-		msp_write_dsp(client, 0x0000, val);
-		msp_write_dsp(client, 0x0007, reallymuted ? 0x1 : (val | 0x1));
-		if (state->has_scart2_out_volume)
-			msp_write_dsp(client, 0x0040, reallymuted ? 0x1 : (val | 0x1));
-		if (state->has_headphones)
-			msp_write_dsp(client, 0x0006, val);
-		break;
-	}
-
-	case V4L2_CID_AUDIO_BASS:
-		val = ((val - 32768) * 0x60 / 65535) << 8;
-		msp_write_dsp(client, 0x0002, val);
-		if (state->has_headphones)
-			msp_write_dsp(client, 0x0031, val);
-		break;
-
-	case V4L2_CID_AUDIO_TREBLE:
-		val = ((val - 32768) * 0x60 / 65535) << 8;
-		msp_write_dsp(client, 0x0003, val);
-		if (state->has_headphones)
-			msp_write_dsp(client, 0x0032, val);
-		break;
-
-	case V4L2_CID_AUDIO_LOUDNESS:
-		val = val ? ((5 * 4) << 8) : 0;
-		msp_write_dsp(client, 0x0004, val);
-		if (state->has_headphones)
-			msp_write_dsp(client, 0x0033, val);
-		break;
-
-	case V4L2_CID_AUDIO_BALANCE:
-		val = (u8)((val / 256) - 128);
-		msp_write_dsp(client, 0x0001, val << 8);
-		if (state->has_headphones)
-			msp_write_dsp(client, 0x0030, val << 8);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-void msp_update_volume(struct msp_state *state)
-{
-	/* Force an update of the volume/mute cluster */
-	v4l2_ctrl_lock(state->volume);
-	state->volume->val = state->volume->cur.val;
-	state->muted->val = state->muted->cur.val;
-	msp_s_ctrl(state->volume);
-	v4l2_ctrl_unlock(state->volume);
-}
-
-/* --- v4l2 ioctls --- */
-static int msp_s_radio(struct v4l2_subdev *sd)
-{
-	struct msp_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (state->radio)
-		return 0;
-	state->radio = 1;
-	v4l_dbg(1, msp_debug, client, "switching to radio mode\n");
-	state->watch_stereo = 0;
-	switch (state->opmode) {
-	case OPMODE_MANUAL:
-		/* set msp3400 to FM radio mode */
-		msp3400c_set_mode(client, MSP_MODE_FM_RADIO);
-		msp3400c_set_carrier(client, MSP_CARRIER(10.7),
-				MSP_CARRIER(10.7));
-		msp_update_volume(state);
-		break;
-	case OPMODE_AUTODETECT:
-	case OPMODE_AUTOSELECT:
-		/* the thread will do for us */
-		msp_wake_thread(client);
-		break;
-	}
-	return 0;
-}
-
-static int msp_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *freq)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	/* new channel -- kick audio carrier scan */
-	msp_wake_thread(client);
-	return 0;
-}
-
-static int msp_querystd(struct v4l2_subdev *sd, v4l2_std_id *id)
-{
-	struct msp_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	*id &= state->detected_std;
-
-	v4l_dbg(2, msp_debug, client,
-		"detected standard: %s(0x%08Lx)\n",
-		msp_standard_std_name(state->std), state->detected_std);
-
-	return 0;
-}
-
-static int msp_s_std(struct v4l2_subdev *sd, v4l2_std_id id)
-{
-	struct msp_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	int update = state->radio || state->v4l2_std != id;
-
-	state->v4l2_std = id;
-	state->radio = 0;
-	if (update)
-		msp_wake_thread(client);
-	return 0;
-}
-
-static int msp_s_routing(struct v4l2_subdev *sd,
-			 u32 input, u32 output, u32 config)
-{
-	struct msp_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	int tuner = (input >> 3) & 1;
-	int sc_in = input & 0x7;
-	int sc1_out = output & 0xf;
-	int sc2_out = (output >> 4) & 0xf;
-	u16 val, reg;
-	int i;
-	int extern_input = 1;
-
-	if (state->route_in == input && state->route_out == output)
-		return 0;
-	state->route_in = input;
-	state->route_out = output;
-	/* check if the tuner input is used */
-	for (i = 0; i < 5; i++) {
-		if (((input >> (4 + i * 4)) & 0xf) == 0)
-			extern_input = 0;
-	}
-	state->mode = extern_input ? MSP_MODE_EXTERN : MSP_MODE_AM_DETECT;
-	state->rxsubchans = V4L2_TUNER_SUB_STEREO;
-	msp_set_scart(client, sc_in, 0);
-	msp_set_scart(client, sc1_out, 1);
-	msp_set_scart(client, sc2_out, 2);
-	msp_set_audmode(client);
-	reg = (state->opmode == OPMODE_AUTOSELECT) ? 0x30 : 0xbb;
-	val = msp_read_dem(client, reg);
-	msp_write_dem(client, reg, (val & ~0x100) | (tuner << 8));
-	/* wake thread when a new input is chosen */
-	msp_wake_thread(client);
-	return 0;
-}
-
-static int msp_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
-{
-	struct msp_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (vt->type != V4L2_TUNER_ANALOG_TV)
-		return 0;
-	if (!state->radio) {
-		if (state->opmode == OPMODE_AUTOSELECT)
-			msp_detect_stereo(client);
-		vt->rxsubchans = state->rxsubchans;
-	}
-	vt->audmode = state->audmode;
-	vt->capability |= V4L2_TUNER_CAP_STEREO |
-		V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2;
-	return 0;
-}
-
-static int msp_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
-{
-	struct msp_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (state->radio)  /* TODO: add mono/stereo support for radio */
-		return 0;
-	if (state->audmode == vt->audmode)
-		return 0;
-	state->audmode = vt->audmode;
-	/* only set audmode */
-	msp_set_audmode(client);
-	return 0;
-}
-
-static int msp_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq)
-{
-	struct msp_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	v4l_dbg(1, msp_debug, client, "Setting I2S speed to %d\n", freq);
-
-	switch (freq) {
-		case 1024000:
-			state->i2s_mode = 0;
-			break;
-		case 2048000:
-			state->i2s_mode = 1;
-			break;
-		default:
-			return -EINVAL;
-	}
-	return 0;
-}
-
-static int msp_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct msp_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, state->ident,
-			(state->rev1 << 16) | state->rev2);
-}
-
-static int msp_log_status(struct v4l2_subdev *sd)
-{
-	struct msp_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	const char *p;
-	char prefix[V4L2_SUBDEV_NAME_SIZE + 20];
-
-	if (state->opmode == OPMODE_AUTOSELECT)
-		msp_detect_stereo(client);
-	v4l_info(client, "%s rev1 = 0x%04x rev2 = 0x%04x\n",
-			client->name, state->rev1, state->rev2);
-	snprintf(prefix, sizeof(prefix), "%s: Audio:    ", sd->name);
-	v4l2_ctrl_handler_log_status(&state->hdl, prefix);
-	switch (state->mode) {
-		case MSP_MODE_AM_DETECT: p = "AM (for carrier detect)"; break;
-		case MSP_MODE_FM_RADIO: p = "FM Radio"; break;
-		case MSP_MODE_FM_TERRA: p = "Terrestrial FM-mono/stereo"; break;
-		case MSP_MODE_FM_SAT: p = "Satellite FM-mono"; break;
-		case MSP_MODE_FM_NICAM1: p = "NICAM/FM (B/G, D/K)"; break;
-		case MSP_MODE_FM_NICAM2: p = "NICAM/FM (I)"; break;
-		case MSP_MODE_AM_NICAM: p = "NICAM/AM (L)"; break;
-		case MSP_MODE_BTSC: p = "BTSC"; break;
-		case MSP_MODE_EXTERN: p = "External input"; break;
-		default: p = "unknown"; break;
-	}
-	if (state->mode == MSP_MODE_EXTERN) {
-		v4l_info(client, "Mode:     %s\n", p);
-	} else if (state->opmode == OPMODE_MANUAL) {
-		v4l_info(client, "Mode:     %s (%s%s)\n", p,
-				(state->rxsubchans & V4L2_TUNER_SUB_STEREO) ? "stereo" : "mono",
-				(state->rxsubchans & V4L2_TUNER_SUB_LANG2) ? ", dual" : "");
-	} else {
-		if (state->opmode == OPMODE_AUTODETECT)
-			v4l_info(client, "Mode:     %s\n", p);
-		v4l_info(client, "Standard: %s (%s%s)\n",
-				msp_standard_std_name(state->std),
-				(state->rxsubchans & V4L2_TUNER_SUB_STEREO) ? "stereo" : "mono",
-				(state->rxsubchans & V4L2_TUNER_SUB_LANG2) ? ", dual" : "");
-	}
-	v4l_info(client, "Audmode:  0x%04x\n", state->audmode);
-	v4l_info(client, "Routing:  0x%08x (input) 0x%08x (output)\n",
-			state->route_in, state->route_out);
-	v4l_info(client, "ACB:      0x%04x\n", state->acb);
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int msp_suspend(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	v4l_dbg(1, msp_debug, client, "suspend\n");
-	msp_reset(client);
-	return 0;
-}
-
-static int msp_resume(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	v4l_dbg(1, msp_debug, client, "resume\n");
-	msp_wake_thread(client);
-	return 0;
-}
-#endif
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_ctrl_ops msp_ctrl_ops = {
-	.s_ctrl = msp_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops msp_core_ops = {
-	.log_status = msp_log_status,
-	.g_chip_ident = msp_g_chip_ident,
-	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
-	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
-	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
-	.g_ctrl = v4l2_subdev_g_ctrl,
-	.s_ctrl = v4l2_subdev_s_ctrl,
-	.queryctrl = v4l2_subdev_queryctrl,
-	.querymenu = v4l2_subdev_querymenu,
-	.s_std = msp_s_std,
-};
-
-static const struct v4l2_subdev_video_ops msp_video_ops = {
-	.querystd = msp_querystd,
-};
-
-static const struct v4l2_subdev_tuner_ops msp_tuner_ops = {
-	.s_frequency = msp_s_frequency,
-	.g_tuner = msp_g_tuner,
-	.s_tuner = msp_s_tuner,
-	.s_radio = msp_s_radio,
-};
-
-static const struct v4l2_subdev_audio_ops msp_audio_ops = {
-	.s_routing = msp_s_routing,
-	.s_i2s_clock_freq = msp_s_i2s_clock_freq,
-};
-
-static const struct v4l2_subdev_ops msp_ops = {
-	.core = &msp_core_ops,
-	.video = &msp_video_ops,
-	.tuner = &msp_tuner_ops,
-	.audio = &msp_audio_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static int msp_probe(struct i2c_client *client, const struct i2c_device_id *id)
-{
-	struct msp_state *state;
-	struct v4l2_subdev *sd;
-	struct v4l2_ctrl_handler *hdl;
-	int (*thread_func)(void *data) = NULL;
-	int msp_hard;
-	int msp_family;
-	int msp_revision;
-	int msp_product, msp_prod_hi, msp_prod_lo;
-	int msp_rom;
-
-	if (!id)
-		strlcpy(client->name, "msp3400", sizeof(client->name));
-
-	if (msp_reset(client) == -1) {
-		v4l_dbg(1, msp_debug, client, "msp3400 not found\n");
-		return -ENODEV;
-	}
-
-	state = kzalloc(sizeof(*state), GFP_KERNEL);
-	if (!state)
-		return -ENOMEM;
-
-	sd = &state->sd;
-	v4l2_i2c_subdev_init(sd, client, &msp_ops);
-
-	state->v4l2_std = V4L2_STD_NTSC;
-	state->detected_std = V4L2_STD_ALL;
-	state->audmode = V4L2_TUNER_MODE_STEREO;
-	state->input = -1;
-	state->i2s_mode = 0;
-	init_waitqueue_head(&state->wq);
-	/* These are the reset input/output positions */
-	state->route_in = MSP_INPUT_DEFAULT;
-	state->route_out = MSP_OUTPUT_DEFAULT;
-
-	state->rev1 = msp_read_dsp(client, 0x1e);
-	if (state->rev1 != -1)
-		state->rev2 = msp_read_dsp(client, 0x1f);
-	v4l_dbg(1, msp_debug, client, "rev1=0x%04x, rev2=0x%04x\n",
-			state->rev1, state->rev2);
-	if (state->rev1 == -1 || (state->rev1 == 0 && state->rev2 == 0)) {
-		v4l_dbg(1, msp_debug, client,
-				"not an msp3400 (cannot read chip version)\n");
-		kfree(state);
-		return -ENODEV;
-	}
-
-	msp_family = ((state->rev1 >> 4) & 0x0f) + 3;
-	msp_product = (state->rev2 >> 8) & 0xff;
-	msp_prod_hi = msp_product / 10;
-	msp_prod_lo = msp_product % 10;
-	msp_revision = (state->rev1 & 0x0f) + '@';
-	msp_hard = ((state->rev1 >> 8) & 0xff) + '@';
-	msp_rom = state->rev2 & 0x1f;
-	/* Rev B=2, C=3, D=4, G=7 */
-	state->ident = msp_family * 10000 + 4000 + msp_product * 10 +
-			msp_revision - '@';
-
-	/* Has NICAM support: all mspx41x and mspx45x products have NICAM */
-	state->has_nicam =
-		msp_prod_hi == 1 || msp_prod_hi == 5;
-	/* Has radio support: was added with revision G */
-	state->has_radio =
-		msp_revision >= 'G';
-	/* Has headphones output: not for stripped down products */
-	state->has_headphones =
-		msp_prod_lo < 5;
-	/* Has scart2 input: not in stripped down products of the '3' family */
-	state->has_scart2 =
-		msp_family >= 4 || msp_prod_lo < 7;
-	/* Has scart3 input: not in stripped down products of the '3' family */
-	state->has_scart3 =
-		msp_family >= 4 || msp_prod_lo < 5;
-	/* Has scart4 input: not in pre D revisions, not in stripped D revs */
-	state->has_scart4 =
-		msp_family >= 4 || (msp_revision >= 'D' && msp_prod_lo < 5);
-	/* Has scart2 output: not in stripped down products of
-	 * the '3' family */
-	state->has_scart2_out =
-		msp_family >= 4 || msp_prod_lo < 5;
-	/* Has scart2 a volume control? Not in pre-D revisions. */
-	state->has_scart2_out_volume =
-		msp_revision > 'C' && state->has_scart2_out;
-	/* Has a configurable i2s out? */
-	state->has_i2s_conf =
-		msp_revision >= 'G' && msp_prod_lo < 7;
-	/* Has subwoofer output: not in pre-D revs and not in stripped down
-	 * products */
-	state->has_subwoofer =
-		msp_revision >= 'D' && msp_prod_lo < 5;
-	/* Has soundprocessing (bass/treble/balance/loudness/equalizer):
-	 *  not in stripped down products */
-	state->has_sound_processing =
-		msp_prod_lo < 7;
-	/* Has Virtual Dolby Surround: only in msp34x1 */
-	state->has_virtual_dolby_surround =
-		msp_revision == 'G' && msp_prod_lo == 1;
-	/* Has Virtual Dolby Surround & Dolby Pro Logic: only in msp34x2 */
-	state->has_dolby_pro_logic =
-		msp_revision == 'G' && msp_prod_lo == 2;
-	/* The msp343xG supports BTSC only and cannot do Automatic Standard
-	 * Detection. */
-	state->force_btsc =
-		msp_family == 3 && msp_revision == 'G' && msp_prod_hi == 3;
-
-	state->opmode = opmode;
-	if (state->opmode == OPMODE_AUTO) {
-		/* MSP revision G and up have both autodetect and autoselect */
-		if (msp_revision >= 'G')
-			state->opmode = OPMODE_AUTOSELECT;
-		/* MSP revision D and up have autodetect */
-		else if (msp_revision >= 'D')
-			state->opmode = OPMODE_AUTODETECT;
-		else
-			state->opmode = OPMODE_MANUAL;
-	}
-
-	hdl = &state->hdl;
-	v4l2_ctrl_handler_init(hdl, 6);
-	if (state->has_sound_processing) {
-		v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
-			V4L2_CID_AUDIO_BASS, 0, 65535, 65535 / 100, 32768);
-		v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
-			V4L2_CID_AUDIO_TREBLE, 0, 65535, 65535 / 100, 32768);
-		v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
-			V4L2_CID_AUDIO_LOUDNESS, 0, 1, 1, 0);
-	}
-	state->volume = v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
-			V4L2_CID_AUDIO_VOLUME, 0, 65535, 65535 / 100, 58880);
-	v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
-			V4L2_CID_AUDIO_BALANCE, 0, 65535, 65535 / 100, 32768);
-	state->muted = v4l2_ctrl_new_std(hdl, &msp_ctrl_ops,
-			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
-	sd->ctrl_handler = hdl;
-	if (hdl->error) {
-		int err = hdl->error;
-
-		v4l2_ctrl_handler_free(hdl);
-		kfree(state);
-		return err;
-	}
-
-	v4l2_ctrl_cluster(2, &state->volume);
-	v4l2_ctrl_handler_setup(hdl);
-
-	/* hello world :-) */
-	v4l_info(client, "MSP%d4%02d%c-%c%d found @ 0x%x (%s)\n",
-			msp_family, msp_product,
-			msp_revision, msp_hard, msp_rom,
-			client->addr << 1, client->adapter->name);
-	v4l_info(client, "%s ", client->name);
-	if (state->has_nicam && state->has_radio)
-		printk(KERN_CONT "supports nicam and radio, ");
-	else if (state->has_nicam)
-		printk(KERN_CONT "supports nicam, ");
-	else if (state->has_radio)
-		printk(KERN_CONT "supports radio, ");
-	printk(KERN_CONT "mode is ");
-
-	/* version-specific initialization */
-	switch (state->opmode) {
-	case OPMODE_MANUAL:
-		printk(KERN_CONT "manual");
-		thread_func = msp3400c_thread;
-		break;
-	case OPMODE_AUTODETECT:
-		printk(KERN_CONT "autodetect");
-		thread_func = msp3410d_thread;
-		break;
-	case OPMODE_AUTOSELECT:
-		printk(KERN_CONT "autodetect and autoselect");
-		thread_func = msp34xxg_thread;
-		break;
-	}
-	printk(KERN_CONT "\n");
-
-	/* startup control thread if needed */
-	if (thread_func) {
-		state->kthread = kthread_run(thread_func, client, "msp34xx");
-
-		if (IS_ERR(state->kthread))
-			v4l_warn(client, "kernel_thread() failed\n");
-		msp_wake_thread(client);
-	}
-	return 0;
-}
-
-static int msp_remove(struct i2c_client *client)
-{
-	struct msp_state *state = to_state(i2c_get_clientdata(client));
-
-	v4l2_device_unregister_subdev(&state->sd);
-	/* shutdown control thread */
-	if (state->kthread) {
-		state->restart = 1;
-		kthread_stop(state->kthread);
-	}
-	msp_reset(client);
-
-	v4l2_ctrl_handler_free(&state->hdl);
-	kfree(state);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct dev_pm_ops msp3400_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(msp_suspend, msp_resume)
-};
-
-static const struct i2c_device_id msp_id[] = {
-	{ "msp3400", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, msp_id);
-
-static struct i2c_driver msp_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "msp3400",
-		.pm	= &msp3400_pm_ops,
-	},
-	.probe		= msp_probe,
-	.remove		= msp_remove,
-	.id_table	= msp_id,
-};
-
-module_i2c_driver(msp_driver);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/video/msp3400-driver.h b/drivers/media/video/msp3400-driver.h
deleted file mode 100644
index fbe5e07..0000000
--- a/drivers/media/video/msp3400-driver.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- */
-
-#ifndef MSP3400_DRIVER_H
-#define MSP3400_DRIVER_H
-
-#include <media/msp3400.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ctrls.h>
-
-/* ---------------------------------------------------------------------- */
-
-/* This macro is allowed for *constants* only, gcc must calculate it
-   at compile time.  Remember -- no floats in kernel mode */
-#define MSP_CARRIER(freq) ((int)((float)(freq / 18.432) * (1 << 24)))
-
-#define MSP_MODE_AM_DETECT   0
-#define MSP_MODE_FM_RADIO    2
-#define MSP_MODE_FM_TERRA    3
-#define MSP_MODE_FM_SAT      4
-#define MSP_MODE_FM_NICAM1   5
-#define MSP_MODE_FM_NICAM2   6
-#define MSP_MODE_AM_NICAM    7
-#define MSP_MODE_BTSC        8
-#define MSP_MODE_EXTERN      9
-
-#define SCART_IN1     0
-#define SCART_IN2     1
-#define SCART_IN3     2
-#define SCART_IN4     3
-#define SCART_IN1_DA  4
-#define SCART_IN2_DA  5
-#define SCART_MONO    6
-#define SCART_MUTE    7
-
-#define SCART_DSP_IN  0
-#define SCART1_OUT    1
-#define SCART2_OUT    2
-
-#define OPMODE_AUTO       -1
-#define OPMODE_MANUAL      0
-#define OPMODE_AUTODETECT  1   /* use autodetect (>= msp3410 only) */
-#define OPMODE_AUTOSELECT  2   /* use autodetect & autoselect (>= msp34xxG)   */
-
-/* module parameters */
-extern int msp_debug;
-extern bool msp_once;
-extern bool msp_amsound;
-extern int msp_standard;
-extern bool msp_dolby;
-extern int msp_stereo_thresh;
-
-struct msp_state {
-	struct v4l2_subdev sd;
-	struct v4l2_ctrl_handler hdl;
-	int rev1, rev2;
-	int ident;
-	u8 has_nicam;
-	u8 has_radio;
-	u8 has_headphones;
-	u8 has_ntsc_jp_d_k3;
-	u8 has_scart2;
-	u8 has_scart3;
-	u8 has_scart4;
-	u8 has_scart2_out;
-	u8 has_scart2_out_volume;
-	u8 has_i2s_conf;
-	u8 has_subwoofer;
-	u8 has_sound_processing;
-	u8 has_virtual_dolby_surround;
-	u8 has_dolby_pro_logic;
-	u8 force_btsc;
-
-	int radio;
-	int opmode;
-	int std;
-	int mode;
-	v4l2_std_id v4l2_std, detected_std;
-	int nicam_on;
-	int acb;
-	int in_scart;
-	int i2s_mode;
-	int main, second;	/* sound carrier */
-	int input;
-	u32 route_in;
-	u32 route_out;
-
-	/* v4l2 */
-	int audmode;
-	int rxsubchans;
-
-	struct {
-		/* volume cluster */
-		struct v4l2_ctrl *volume;
-		struct v4l2_ctrl *muted;
-	};
-
-	int scan_in_progress;
-
-	/* thread */
-	struct task_struct   *kthread;
-	wait_queue_head_t    wq;
-	unsigned int         restart:1;
-	unsigned int         watch_stereo:1;
-};
-
-static inline struct msp_state *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct msp_state, sd);
-}
-
-static inline struct msp_state *ctrl_to_state(struct v4l2_ctrl *ctrl)
-{
-	return container_of(ctrl->handler, struct msp_state, hdl);
-}
-
-/* msp3400-driver.c */
-int msp_write_dem(struct i2c_client *client, int addr, int val);
-int msp_write_dsp(struct i2c_client *client, int addr, int val);
-int msp_read_dem(struct i2c_client *client, int addr);
-int msp_read_dsp(struct i2c_client *client, int addr);
-int msp_reset(struct i2c_client *client);
-void msp_set_scart(struct i2c_client *client, int in, int out);
-void msp_update_volume(struct msp_state *state);
-int msp_sleep(struct msp_state *state, int timeout);
-
-/* msp3400-kthreads.c */
-const char *msp_standard_std_name(int std);
-void msp_set_audmode(struct i2c_client *client);
-int msp_detect_stereo(struct i2c_client *client);
-int msp3400c_thread(void *data);
-int msp3410d_thread(void *data);
-int msp34xxg_thread(void *data);
-void msp3400c_set_mode(struct i2c_client *client, int mode);
-void msp3400c_set_carrier(struct i2c_client *client, int cdo1, int cdo2);
-
-#endif /* MSP3400_DRIVER_H */
diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c
deleted file mode 100644
index f8b5171..0000000
--- a/drivers/media/video/msp3400-kthreads.c
+++ /dev/null
@@ -1,1165 +0,0 @@
-/*
- * Programming the mspx4xx sound processor family
- *
- * (c) 1997-2001 Gerd Knorr <kraxel@bytesex.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/i2c.h>
-#include <linux/freezer.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-common.h>
-#include <media/msp3400.h>
-#include <linux/kthread.h>
-#include <linux/suspend.h>
-#include "msp3400-driver.h"
-
-/* this one uses the automatic sound standard detection of newer msp34xx
-   chip versions */
-static struct {
-	int retval;
-	int main, second;
-	char *name;
-	v4l2_std_id std;
-} msp_stdlist[] = {
-	{ 0x0000, 0, 0, "could not detect sound standard", V4L2_STD_ALL },
-	{ 0x0001, 0, 0, "autodetect start", V4L2_STD_ALL },
-	{ 0x0002, MSP_CARRIER(4.5), MSP_CARRIER(4.72),
-	  "4.5/4.72  M Dual FM-Stereo", V4L2_STD_MN },
-	{ 0x0003, MSP_CARRIER(5.5), MSP_CARRIER(5.7421875),
-	  "5.5/5.74  B/G Dual FM-Stereo", V4L2_STD_BG },
-	{ 0x0004, MSP_CARRIER(6.5), MSP_CARRIER(6.2578125),
-	  "6.5/6.25  D/K1 Dual FM-Stereo", V4L2_STD_DK },
-	{ 0x0005, MSP_CARRIER(6.5), MSP_CARRIER(6.7421875),
-	  "6.5/6.74  D/K2 Dual FM-Stereo", V4L2_STD_DK },
-	{ 0x0006, MSP_CARRIER(6.5), MSP_CARRIER(6.5),
-	  "6.5  D/K FM-Mono (HDEV3)", V4L2_STD_DK },
-	{ 0x0007, MSP_CARRIER(6.5), MSP_CARRIER(5.7421875),
-	  "6.5/5.74  D/K3 Dual FM-Stereo", V4L2_STD_DK },
-	{ 0x0008, MSP_CARRIER(5.5), MSP_CARRIER(5.85),
-	  "5.5/5.85  B/G NICAM FM", V4L2_STD_BG },
-	{ 0x0009, MSP_CARRIER(6.5), MSP_CARRIER(5.85),
-	  "6.5/5.85  L NICAM AM", V4L2_STD_L },
-	{ 0x000a, MSP_CARRIER(6.0), MSP_CARRIER(6.55),
-	  "6.0/6.55  I NICAM FM", V4L2_STD_PAL_I },
-	{ 0x000b, MSP_CARRIER(6.5), MSP_CARRIER(5.85),
-	  "6.5/5.85  D/K NICAM FM", V4L2_STD_DK },
-	{ 0x000c, MSP_CARRIER(6.5), MSP_CARRIER(5.85),
-	  "6.5/5.85  D/K NICAM FM (HDEV2)", V4L2_STD_DK },
-	{ 0x000d, MSP_CARRIER(6.5), MSP_CARRIER(5.85),
-	  "6.5/5.85  D/K NICAM FM (HDEV3)", V4L2_STD_DK },
-	{ 0x0020, MSP_CARRIER(4.5), MSP_CARRIER(4.5),
-	  "4.5  M BTSC-Stereo", V4L2_STD_MTS },
-	{ 0x0021, MSP_CARRIER(4.5), MSP_CARRIER(4.5),
-	  "4.5  M BTSC-Mono + SAP", V4L2_STD_MTS },
-	{ 0x0030, MSP_CARRIER(4.5), MSP_CARRIER(4.5),
-	  "4.5  M EIA-J Japan Stereo", V4L2_STD_NTSC_M_JP },
-	{ 0x0040, MSP_CARRIER(10.7), MSP_CARRIER(10.7),
-	  "10.7  FM-Stereo Radio", V4L2_STD_ALL },
-	{ 0x0050, MSP_CARRIER(6.5), MSP_CARRIER(6.5),
-	  "6.5  SAT-Mono", V4L2_STD_ALL },
-	{ 0x0051, MSP_CARRIER(7.02), MSP_CARRIER(7.20),
-	  "7.02/7.20  SAT-Stereo", V4L2_STD_ALL },
-	{ 0x0060, MSP_CARRIER(7.2), MSP_CARRIER(7.2),
-	  "7.2  SAT ADR", V4L2_STD_ALL },
-	{     -1, 0, 0, NULL, 0 }, /* EOF */
-};
-
-static struct msp3400c_init_data_dem {
-	int fir1[6];
-	int fir2[6];
-	int cdo1;
-	int cdo2;
-	int ad_cv;
-	int mode_reg;
-	int dsp_src;
-	int dsp_matrix;
-} msp3400c_init_data[] = {
-	{	/* AM (for carrier detect / msp3400) */
-		{75, 19, 36, 35, 39, 40},
-		{75, 19, 36, 35, 39, 40},
-		MSP_CARRIER(5.5), MSP_CARRIER(5.5),
-		0x00d0, 0x0500, 0x0020, 0x3000
-	}, {	/* AM (for carrier detect / msp3410) */
-		{-1, -1, -8, 2, 59, 126},
-		{-1, -1, -8, 2, 59, 126},
-		MSP_CARRIER(5.5), MSP_CARRIER(5.5),
-		0x00d0, 0x0100, 0x0020, 0x3000
-	}, {	/* FM Radio */
-		{-8, -8, 4, 6, 78, 107},
-		{-8, -8, 4, 6, 78, 107},
-		MSP_CARRIER(10.7), MSP_CARRIER(10.7),
-		0x00d0, 0x0480, 0x0020, 0x3000
-	}, {	/* Terrestrial FM-mono + FM-stereo */
-		{3, 18, 27, 48, 66, 72},
-		{3, 18, 27, 48, 66, 72},
-		MSP_CARRIER(5.5), MSP_CARRIER(5.5),
-		0x00d0, 0x0480, 0x0030, 0x3000
-	}, {	/* Sat FM-mono */
-		{ 1, 9, 14, 24, 33, 37},
-		{ 3, 18, 27, 48, 66, 72},
-		MSP_CARRIER(6.5), MSP_CARRIER(6.5),
-		0x00c6, 0x0480, 0x0000, 0x3000
-	}, {	/* NICAM/FM --  B/G (5.5/5.85), D/K (6.5/5.85) */
-		{-2, -8, -10, 10, 50, 86},
-		{3, 18, 27, 48, 66, 72},
-		MSP_CARRIER(5.5), MSP_CARRIER(5.5),
-		0x00d0, 0x0040, 0x0120, 0x3000
-	}, {	/* NICAM/FM -- I (6.0/6.552) */
-		{2, 4, -6, -4, 40, 94},
-		{3, 18, 27, 48, 66, 72},
-		MSP_CARRIER(6.0), MSP_CARRIER(6.0),
-		0x00d0, 0x0040, 0x0120, 0x3000
-	}, {	/* NICAM/AM -- L (6.5/5.85) */
-		{-2, -8, -10, 10, 50, 86},
-		{-4, -12, -9, 23, 79, 126},
-		MSP_CARRIER(6.5), MSP_CARRIER(6.5),
-		0x00c6, 0x0140, 0x0120, 0x7c00
-	},
-};
-
-struct msp3400c_carrier_detect {
-	int   cdo;
-	char *name;
-};
-
-static struct msp3400c_carrier_detect msp3400c_carrier_detect_main[] = {
-	/* main carrier */
-	{ MSP_CARRIER(4.5),        "4.5   NTSC"                   },
-	{ MSP_CARRIER(5.5),        "5.5   PAL B/G"                },
-	{ MSP_CARRIER(6.0),        "6.0   PAL I"                  },
-	{ MSP_CARRIER(6.5),        "6.5   PAL D/K + SAT + SECAM"  }
-};
-
-static struct msp3400c_carrier_detect msp3400c_carrier_detect_55[] = {
-	/* PAL B/G */
-	{ MSP_CARRIER(5.7421875),  "5.742 PAL B/G FM-stereo"     },
-	{ MSP_CARRIER(5.85),       "5.85  PAL B/G NICAM"         }
-};
-
-static struct msp3400c_carrier_detect msp3400c_carrier_detect_65[] = {
-	/* PAL SAT / SECAM */
-	{ MSP_CARRIER(5.85),       "5.85  PAL D/K + SECAM NICAM" },
-	{ MSP_CARRIER(6.2578125),  "6.25  PAL D/K1 FM-stereo" },
-	{ MSP_CARRIER(6.7421875),  "6.74  PAL D/K2 FM-stereo" },
-	{ MSP_CARRIER(7.02),       "7.02  PAL SAT FM-stereo s/b" },
-	{ MSP_CARRIER(7.20),       "7.20  PAL SAT FM-stereo s"   },
-	{ MSP_CARRIER(7.38),       "7.38  PAL SAT FM-stereo b"   },
-};
-
-/* ------------------------------------------------------------------------ */
-
-const char *msp_standard_std_name(int std)
-{
-	int i;
-
-	for (i = 0; msp_stdlist[i].name != NULL; i++)
-		if (msp_stdlist[i].retval == std)
-			return msp_stdlist[i].name;
-	return "unknown";
-}
-
-static v4l2_std_id msp_standard_std(int std)
-{
-	int i;
-
-	for (i = 0; msp_stdlist[i].name != NULL; i++)
-		if (msp_stdlist[i].retval == std)
-			return msp_stdlist[i].std;
-	return V4L2_STD_ALL;
-}
-
-static void msp_set_source(struct i2c_client *client, u16 src)
-{
-	struct msp_state *state = to_state(i2c_get_clientdata(client));
-
-	if (msp_dolby) {
-		msp_write_dsp(client, 0x0008, 0x0520); /* I2S1 */
-		msp_write_dsp(client, 0x0009, 0x0620); /* I2S2 */
-	} else {
-		msp_write_dsp(client, 0x0008, src);
-		msp_write_dsp(client, 0x0009, src);
-	}
-	msp_write_dsp(client, 0x000a, src);
-	msp_write_dsp(client, 0x000b, src);
-	msp_write_dsp(client, 0x000c, src);
-	if (state->has_scart2_out)
-		msp_write_dsp(client, 0x0041, src);
-}
-
-void msp3400c_set_carrier(struct i2c_client *client, int cdo1, int cdo2)
-{
-	msp_write_dem(client, 0x0093, cdo1 & 0xfff);
-	msp_write_dem(client, 0x009b, cdo1 >> 12);
-	msp_write_dem(client, 0x00a3, cdo2 & 0xfff);
-	msp_write_dem(client, 0x00ab, cdo2 >> 12);
-	msp_write_dem(client, 0x0056, 0); /* LOAD_REG_1/2 */
-}
-
-void msp3400c_set_mode(struct i2c_client *client, int mode)
-{
-	struct msp_state *state = to_state(i2c_get_clientdata(client));
-	struct msp3400c_init_data_dem *data = &msp3400c_init_data[mode];
-	int tuner = (state->route_in >> 3) & 1;
-	int i;
-
-	v4l_dbg(1, msp_debug, client, "set_mode: %d\n", mode);
-	state->mode = mode;
-	state->rxsubchans = V4L2_TUNER_SUB_MONO;
-
-	msp_write_dem(client, 0x00bb, data->ad_cv | (tuner ? 0x100 : 0));
-
-	for (i = 5; i >= 0; i--)               /* fir 1 */
-		msp_write_dem(client, 0x0001, data->fir1[i]);
-
-	msp_write_dem(client, 0x0005, 0x0004); /* fir 2 */
-	msp_write_dem(client, 0x0005, 0x0040);
-	msp_write_dem(client, 0x0005, 0x0000);
-	for (i = 5; i >= 0; i--)
-		msp_write_dem(client, 0x0005, data->fir2[i]);
-
-	msp_write_dem(client, 0x0083, data->mode_reg);
-
-	msp3400c_set_carrier(client, data->cdo1, data->cdo2);
-
-	msp_set_source(client, data->dsp_src);
-	/* set prescales */
-
-	/* volume prescale for SCART (AM mono input) */
-	msp_write_dsp(client, 0x000d, 0x1900);
-	msp_write_dsp(client, 0x000e, data->dsp_matrix);
-	if (state->has_nicam) /* nicam prescale */
-		msp_write_dsp(client, 0x0010, 0x5a00);
-}
-
-/* Set audio mode. Note that the pre-'G' models do not support BTSC+SAP,
-   nor do they support stereo BTSC. */
-static void msp3400c_set_audmode(struct i2c_client *client)
-{
-	static char *strmode[] = {
-		"mono", "stereo", "lang2", "lang1", "lang1+lang2"
-	};
-	struct msp_state *state = to_state(i2c_get_clientdata(client));
-	char *modestr = (state->audmode >= 0 && state->audmode < 5) ?
-		strmode[state->audmode] : "unknown";
-	int src = 0;	/* channel source: FM/AM, nicam or SCART */
-	int audmode = state->audmode;
-
-	if (state->opmode == OPMODE_AUTOSELECT) {
-		/* this method would break everything, let's make sure
-		 * it's never called
-		 */
-		v4l_dbg(1, msp_debug, client,
-			"set_audmode called with mode=%d instead of set_source (ignored)\n",
-			state->audmode);
-		return;
-	}
-
-	/* Note: for the C and D revs no NTSC stereo + SAP is possible as
-	   the hardware does not support SAP. So the rxsubchans combination
-	   of STEREO | LANG2 does not occur. */
-
-	if (state->mode != MSP_MODE_EXTERN) {
-		/* switch to mono if only mono is available */
-		if (state->rxsubchans == V4L2_TUNER_SUB_MONO)
-			audmode = V4L2_TUNER_MODE_MONO;
-		/* if bilingual */
-		else if (state->rxsubchans & V4L2_TUNER_SUB_LANG2) {
-			/* and mono or stereo, then fallback to lang1 */
-			if (audmode == V4L2_TUNER_MODE_MONO ||
-			    audmode == V4L2_TUNER_MODE_STEREO)
-				audmode = V4L2_TUNER_MODE_LANG1;
-		}
-		/* if stereo, and audmode is not mono, then switch to stereo */
-		else if (audmode != V4L2_TUNER_MODE_MONO)
-			audmode = V4L2_TUNER_MODE_STEREO;
-	}
-
-	/* switch demodulator */
-	switch (state->mode) {
-	case MSP_MODE_FM_TERRA:
-		v4l_dbg(1, msp_debug, client, "FM set_audmode: %s\n", modestr);
-		switch (audmode) {
-		case V4L2_TUNER_MODE_STEREO:
-			msp_write_dsp(client, 0x000e, 0x3001);
-			break;
-		case V4L2_TUNER_MODE_MONO:
-		case V4L2_TUNER_MODE_LANG1:
-		case V4L2_TUNER_MODE_LANG2:
-		case V4L2_TUNER_MODE_LANG1_LANG2:
-			msp_write_dsp(client, 0x000e, 0x3000);
-			break;
-		}
-		break;
-	case MSP_MODE_FM_SAT:
-		v4l_dbg(1, msp_debug, client, "SAT set_audmode: %s\n", modestr);
-		switch (audmode) {
-		case V4L2_TUNER_MODE_MONO:
-			msp3400c_set_carrier(client, MSP_CARRIER(6.5), MSP_CARRIER(6.5));
-			break;
-		case V4L2_TUNER_MODE_STEREO:
-		case V4L2_TUNER_MODE_LANG1_LANG2:
-			msp3400c_set_carrier(client, MSP_CARRIER(7.2), MSP_CARRIER(7.02));
-			break;
-		case V4L2_TUNER_MODE_LANG1:
-			msp3400c_set_carrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02));
-			break;
-		case V4L2_TUNER_MODE_LANG2:
-			msp3400c_set_carrier(client, MSP_CARRIER(7.38), MSP_CARRIER(7.02));
-			break;
-		}
-		break;
-	case MSP_MODE_FM_NICAM1:
-	case MSP_MODE_FM_NICAM2:
-	case MSP_MODE_AM_NICAM:
-		v4l_dbg(1, msp_debug, client,
-			"NICAM set_audmode: %s\n", modestr);
-		if (state->nicam_on)
-			src = 0x0100;  /* NICAM */
-		break;
-	case MSP_MODE_BTSC:
-		v4l_dbg(1, msp_debug, client,
-			"BTSC set_audmode: %s\n", modestr);
-		break;
-	case MSP_MODE_EXTERN:
-		v4l_dbg(1, msp_debug, client,
-			"extern set_audmode: %s\n", modestr);
-		src = 0x0200;  /* SCART */
-		break;
-	case MSP_MODE_FM_RADIO:
-		v4l_dbg(1, msp_debug, client,
-			"FM-Radio set_audmode: %s\n", modestr);
-		break;
-	default:
-		v4l_dbg(1, msp_debug, client, "mono set_audmode\n");
-		return;
-	}
-
-	/* switch audio */
-	v4l_dbg(1, msp_debug, client, "set audmode %d\n", audmode);
-	switch (audmode) {
-	case V4L2_TUNER_MODE_STEREO:
-	case V4L2_TUNER_MODE_LANG1_LANG2:
-		src |= 0x0020;
-		break;
-	case V4L2_TUNER_MODE_MONO:
-		if (state->mode == MSP_MODE_AM_NICAM) {
-			v4l_dbg(1, msp_debug, client, "switching to AM mono\n");
-			/* AM mono decoding is handled by tuner, not MSP chip */
-			/* SCART switching control register */
-			msp_set_scart(client, SCART_MONO, 0);
-			src = 0x0200;
-			break;
-		}
-		if (state->rxsubchans & V4L2_TUNER_SUB_STEREO)
-			src = 0x0030;
-		break;
-	case V4L2_TUNER_MODE_LANG1:
-		break;
-	case V4L2_TUNER_MODE_LANG2:
-		src |= 0x0010;
-		break;
-	}
-	v4l_dbg(1, msp_debug, client,
-		"set_audmode final source/matrix = 0x%x\n", src);
-
-	msp_set_source(client, src);
-}
-
-static void msp3400c_print_mode(struct i2c_client *client)
-{
-	struct msp_state *state = to_state(i2c_get_clientdata(client));
-
-	if (state->main == state->second)
-		v4l_dbg(1, msp_debug, client,
-			"mono sound carrier: %d.%03d MHz\n",
-			state->main / 910000, (state->main / 910) % 1000);
-	else
-		v4l_dbg(1, msp_debug, client,
-			"main sound carrier: %d.%03d MHz\n",
-			state->main / 910000, (state->main / 910) % 1000);
-	if (state->mode == MSP_MODE_FM_NICAM1 || state->mode == MSP_MODE_FM_NICAM2)
-		v4l_dbg(1, msp_debug, client,
-			"NICAM/FM carrier  : %d.%03d MHz\n",
-			state->second / 910000, (state->second/910) % 1000);
-	if (state->mode == MSP_MODE_AM_NICAM)
-		v4l_dbg(1, msp_debug, client,
-			"NICAM/AM carrier  : %d.%03d MHz\n",
-			state->second / 910000, (state->second / 910) % 1000);
-	if (state->mode == MSP_MODE_FM_TERRA && state->main != state->second) {
-		v4l_dbg(1, msp_debug, client,
-			"FM-stereo carrier : %d.%03d MHz\n",
-			state->second / 910000, (state->second / 910) % 1000);
-	}
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int msp3400c_detect_stereo(struct i2c_client *client)
-{
-	struct msp_state *state = to_state(i2c_get_clientdata(client));
-	int val;
-	int rxsubchans = state->rxsubchans;
-	int newnicam = state->nicam_on;
-	int update = 0;
-
-	switch (state->mode) {
-	case MSP_MODE_FM_TERRA:
-		val = msp_read_dsp(client, 0x18);
-		if (val > 32767)
-			val -= 65536;
-		v4l_dbg(2, msp_debug, client,
-			"stereo detect register: %d\n", val);
-		if (val > 8192) {
-			rxsubchans = V4L2_TUNER_SUB_STEREO;
-		} else if (val < -4096) {
-			rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
-		} else {
-			rxsubchans = V4L2_TUNER_SUB_MONO;
-		}
-		newnicam = 0;
-		break;
-	case MSP_MODE_FM_NICAM1:
-	case MSP_MODE_FM_NICAM2:
-	case MSP_MODE_AM_NICAM:
-		val = msp_read_dem(client, 0x23);
-		v4l_dbg(2, msp_debug, client, "nicam sync=%d, mode=%d\n",
-			val & 1, (val & 0x1e) >> 1);
-
-		if (val & 1) {
-			/* nicam synced */
-			switch ((val & 0x1e) >> 1)  {
-			case 0:
-			case 8:
-				rxsubchans = V4L2_TUNER_SUB_STEREO;
-				break;
-			case 1:
-			case 9:
-				rxsubchans = V4L2_TUNER_SUB_MONO;
-				break;
-			case 2:
-			case 10:
-				rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
-				break;
-			default:
-				rxsubchans = V4L2_TUNER_SUB_MONO;
-				break;
-			}
-			newnicam = 1;
-		} else {
-			newnicam = 0;
-			rxsubchans = V4L2_TUNER_SUB_MONO;
-		}
-		break;
-	}
-	if (rxsubchans != state->rxsubchans) {
-		update = 1;
-		v4l_dbg(1, msp_debug, client,
-			"watch: rxsubchans %02x => %02x\n",
-			state->rxsubchans, rxsubchans);
-		state->rxsubchans = rxsubchans;
-	}
-	if (newnicam != state->nicam_on) {
-		update = 1;
-		v4l_dbg(1, msp_debug, client, "watch: nicam %d => %d\n",
-			state->nicam_on, newnicam);
-		state->nicam_on = newnicam;
-	}
-	return update;
-}
-
-/*
- * A kernel thread for msp3400 control -- we don't want to block the
- * in the ioctl while doing the sound carrier & stereo detect
- */
-/* stereo/multilang monitoring */
-static void watch_stereo(struct i2c_client *client)
-{
-	struct msp_state *state = to_state(i2c_get_clientdata(client));
-
-	if (msp_detect_stereo(client))
-		msp_set_audmode(client);
-
-	if (msp_once)
-		state->watch_stereo = 0;
-}
-
-int msp3400c_thread(void *data)
-{
-	struct i2c_client *client = data;
-	struct msp_state *state = to_state(i2c_get_clientdata(client));
-	struct msp3400c_carrier_detect *cd;
-	int count, max1, max2, val1, val2, val, i;
-
-	v4l_dbg(1, msp_debug, client, "msp3400 daemon started\n");
-	state->detected_std = V4L2_STD_ALL;
-	set_freezable();
-	for (;;) {
-		v4l_dbg(2, msp_debug, client, "msp3400 thread: sleep\n");
-		msp_sleep(state, -1);
-		v4l_dbg(2, msp_debug, client, "msp3400 thread: wakeup\n");
-
-restart:
-		v4l_dbg(2, msp_debug, client, "thread: restart scan\n");
-		state->restart = 0;
-		if (kthread_should_stop())
-			break;
-
-		if (state->radio || MSP_MODE_EXTERN == state->mode) {
-			/* no carrier scan, just unmute */
-			v4l_dbg(1, msp_debug, client,
-				"thread: no carrier scan\n");
-			state->scan_in_progress = 0;
-			msp_update_volume(state);
-			continue;
-		}
-
-		/* mute audio */
-		state->scan_in_progress = 1;
-		msp_update_volume(state);
-
-		msp3400c_set_mode(client, MSP_MODE_AM_DETECT);
-		val1 = val2 = 0;
-		max1 = max2 = -1;
-		state->watch_stereo = 0;
-		state->nicam_on = 0;
-
-		/* wait for tuner to settle down after a channel change */
-		if (msp_sleep(state, 200))
-			goto restart;
-
-		/* carrier detect pass #1 -- main carrier */
-		cd = msp3400c_carrier_detect_main;
-		count = ARRAY_SIZE(msp3400c_carrier_detect_main);
-
-		if (msp_amsound && (state->v4l2_std & V4L2_STD_SECAM)) {
-			/* autodetect doesn't work well with AM ... */
-			max1 = 3;
-			count = 0;
-			v4l_dbg(1, msp_debug, client, "AM sound override\n");
-		}
-
-		for (i = 0; i < count; i++) {
-			msp3400c_set_carrier(client, cd[i].cdo, cd[i].cdo);
-			if (msp_sleep(state, 100))
-				goto restart;
-			val = msp_read_dsp(client, 0x1b);
-			if (val > 32767)
-				val -= 65536;
-			if (val1 < val)
-				val1 = val, max1 = i;
-			v4l_dbg(1, msp_debug, client,
-				"carrier1 val: %5d / %s\n", val, cd[i].name);
-		}
-
-		/* carrier detect pass #2 -- second (stereo) carrier */
-		switch (max1) {
-		case 1: /* 5.5 */
-			cd = msp3400c_carrier_detect_55;
-			count = ARRAY_SIZE(msp3400c_carrier_detect_55);
-			break;
-		case 3: /* 6.5 */
-			cd = msp3400c_carrier_detect_65;
-			count = ARRAY_SIZE(msp3400c_carrier_detect_65);
-			break;
-		case 0: /* 4.5 */
-		case 2: /* 6.0 */
-		default:
-			cd = NULL;
-			count = 0;
-			break;
-		}
-
-		if (msp_amsound && (state->v4l2_std & V4L2_STD_SECAM)) {
-			/* autodetect doesn't work well with AM ... */
-			cd = NULL;
-			count = 0;
-			max2 = 0;
-		}
-		for (i = 0; i < count; i++) {
-			msp3400c_set_carrier(client, cd[i].cdo, cd[i].cdo);
-			if (msp_sleep(state, 100))
-				goto restart;
-			val = msp_read_dsp(client, 0x1b);
-			if (val > 32767)
-				val -= 65536;
-			if (val2 < val)
-				val2 = val, max2 = i;
-			v4l_dbg(1, msp_debug, client,
-				"carrier2 val: %5d / %s\n", val, cd[i].name);
-		}
-
-		/* program the msp3400 according to the results */
-		state->main = msp3400c_carrier_detect_main[max1].cdo;
-		switch (max1) {
-		case 1: /* 5.5 */
-			state->detected_std = V4L2_STD_BG | V4L2_STD_PAL_H;
-			if (max2 == 0) {
-				/* B/G FM-stereo */
-				state->second = msp3400c_carrier_detect_55[max2].cdo;
-				msp3400c_set_mode(client, MSP_MODE_FM_TERRA);
-				state->watch_stereo = 1;
-			} else if (max2 == 1 && state->has_nicam) {
-				/* B/G NICAM */
-				state->second = msp3400c_carrier_detect_55[max2].cdo;
-				msp3400c_set_mode(client, MSP_MODE_FM_NICAM1);
-				state->nicam_on = 1;
-				state->watch_stereo = 1;
-			} else {
-				goto no_second;
-			}
-			break;
-		case 2: /* 6.0 */
-			/* PAL I NICAM */
-			state->detected_std = V4L2_STD_PAL_I;
-			state->second = MSP_CARRIER(6.552);
-			msp3400c_set_mode(client, MSP_MODE_FM_NICAM2);
-			state->nicam_on = 1;
-			state->watch_stereo = 1;
-			break;
-		case 3: /* 6.5 */
-			if (max2 == 1 || max2 == 2) {
-				/* D/K FM-stereo */
-				state->second = msp3400c_carrier_detect_65[max2].cdo;
-				msp3400c_set_mode(client, MSP_MODE_FM_TERRA);
-				state->watch_stereo = 1;
-				state->detected_std = V4L2_STD_DK;
-			} else if (max2 == 0 && (state->v4l2_std & V4L2_STD_SECAM)) {
-				/* L NICAM or AM-mono */
-				state->second = msp3400c_carrier_detect_65[max2].cdo;
-				msp3400c_set_mode(client, MSP_MODE_AM_NICAM);
-				state->watch_stereo = 1;
-				state->detected_std = V4L2_STD_L;
-			} else if (max2 == 0 && state->has_nicam) {
-				/* D/K NICAM */
-				state->second = msp3400c_carrier_detect_65[max2].cdo;
-				msp3400c_set_mode(client, MSP_MODE_FM_NICAM1);
-				state->nicam_on = 1;
-				state->watch_stereo = 1;
-				state->detected_std = V4L2_STD_DK;
-			} else {
-				goto no_second;
-			}
-			break;
-		case 0: /* 4.5 */
-			state->detected_std = V4L2_STD_MN;
-		default:
-no_second:
-			state->second = msp3400c_carrier_detect_main[max1].cdo;
-			msp3400c_set_mode(client, MSP_MODE_FM_TERRA);
-			break;
-		}
-		msp3400c_set_carrier(client, state->second, state->main);
-
-		/* unmute */
-		state->scan_in_progress = 0;
-		msp3400c_set_audmode(client);
-		msp_update_volume(state);
-
-		if (msp_debug)
-			msp3400c_print_mode(client);
-
-		/* monitor tv audio mode, the first time don't wait
-		   so long to get a quick stereo/bilingual result */
-		count = 3;
-		while (state->watch_stereo) {
-			if (msp_sleep(state, count ? 1000 : 5000))
-				goto restart;
-			if (count)
-				count--;
-			watch_stereo(client);
-		}
-	}
-	v4l_dbg(1, msp_debug, client, "thread: exit\n");
-	return 0;
-}
-
-
-int msp3410d_thread(void *data)
-{
-	struct i2c_client *client = data;
-	struct msp_state *state = to_state(i2c_get_clientdata(client));
-	int val, i, std, count;
-
-	v4l_dbg(1, msp_debug, client, "msp3410 daemon started\n");
-	state->detected_std = V4L2_STD_ALL;
-	set_freezable();
-	for (;;) {
-		v4l_dbg(2, msp_debug, client, "msp3410 thread: sleep\n");
-		msp_sleep(state, -1);
-		v4l_dbg(2, msp_debug, client, "msp3410 thread: wakeup\n");
-
-restart:
-		v4l_dbg(2, msp_debug, client, "thread: restart scan\n");
-		state->restart = 0;
-		if (kthread_should_stop())
-			break;
-
-		if (state->mode == MSP_MODE_EXTERN) {
-			/* no carrier scan needed, just unmute */
-			v4l_dbg(1, msp_debug, client,
-				"thread: no carrier scan\n");
-			state->scan_in_progress = 0;
-			msp_update_volume(state);
-			continue;
-		}
-
-		/* mute audio */
-		state->scan_in_progress = 1;
-		msp_update_volume(state);
-
-		/* start autodetect. Note: autodetect is not supported for
-		   NTSC-M and radio, hence we force the standard in those
-		   cases. */
-		if (state->radio)
-			std = 0x40;
-		else
-			std = (state->v4l2_std & V4L2_STD_NTSC) ? 0x20 : 1;
-		state->watch_stereo = 0;
-		state->nicam_on = 0;
-
-		/* wait for tuner to settle down after a channel change */
-		if (msp_sleep(state, 200))
-			goto restart;
-
-		if (msp_debug)
-			v4l_dbg(2, msp_debug, client,
-				"setting standard: %s (0x%04x)\n",
-				msp_standard_std_name(std), std);
-
-		if (std != 1) {
-			/* programmed some specific mode */
-			val = std;
-		} else {
-			/* triggered autodetect */
-			msp_write_dem(client, 0x20, std);
-			for (;;) {
-				if (msp_sleep(state, 100))
-					goto restart;
-
-				/* check results */
-				val = msp_read_dem(client, 0x7e);
-				if (val < 0x07ff)
-					break;
-				v4l_dbg(2, msp_debug, client,
-					"detection still in progress\n");
-			}
-		}
-		for (i = 0; msp_stdlist[i].name != NULL; i++)
-			if (msp_stdlist[i].retval == val)
-				break;
-		v4l_dbg(1, msp_debug, client, "current standard: %s (0x%04x)\n",
-			msp_standard_std_name(val), val);
-		state->main   = msp_stdlist[i].main;
-		state->second = msp_stdlist[i].second;
-		state->std = val;
-		state->rxsubchans = V4L2_TUNER_SUB_MONO;
-
-		if (msp_amsound && !state->radio &&
-		    (state->v4l2_std & V4L2_STD_SECAM) && (val != 0x0009)) {
-			/* autodetection has failed, let backup */
-			v4l_dbg(1, msp_debug, client, "autodetection failed,"
-				" switching to backup standard: %s (0x%04x)\n",
-				msp_stdlist[8].name ?
-					msp_stdlist[8].name : "unknown", val);
-			state->std = val = 0x0009;
-			msp_write_dem(client, 0x20, val);
-		} else {
-			state->detected_std = msp_standard_std(state->std);
-		}
-
-		/* set stereo */
-		switch (val) {
-		case 0x0008: /* B/G NICAM */
-		case 0x000a: /* I NICAM */
-		case 0x000b: /* D/K NICAM */
-			if (val == 0x000a)
-				state->mode = MSP_MODE_FM_NICAM2;
-			else
-				state->mode = MSP_MODE_FM_NICAM1;
-			/* just turn on stereo */
-			state->nicam_on = 1;
-			state->watch_stereo = 1;
-			break;
-		case 0x0009:
-			state->mode = MSP_MODE_AM_NICAM;
-			state->nicam_on = 1;
-			state->watch_stereo = 1;
-			break;
-		case 0x0020: /* BTSC */
-			/* The pre-'G' models only have BTSC-mono */
-			state->mode = MSP_MODE_BTSC;
-			break;
-		case 0x0040: /* FM radio */
-			state->mode = MSP_MODE_FM_RADIO;
-			state->rxsubchans = V4L2_TUNER_SUB_STEREO;
-			/* not needed in theory if we have radio, but
-			   short programming enables carrier mute */
-			msp3400c_set_mode(client, MSP_MODE_FM_RADIO);
-			msp3400c_set_carrier(client, MSP_CARRIER(10.7),
-					    MSP_CARRIER(10.7));
-			break;
-		case 0x0002:
-		case 0x0003:
-		case 0x0004:
-		case 0x0005:
-			state->mode = MSP_MODE_FM_TERRA;
-			state->watch_stereo = 1;
-			break;
-		}
-
-		/* set various prescales */
-		msp_write_dsp(client, 0x0d, 0x1900); /* scart */
-		msp_write_dsp(client, 0x0e, 0x3000); /* FM */
-		if (state->has_nicam)
-			msp_write_dsp(client, 0x10, 0x5a00); /* nicam */
-
-		if (state->has_i2s_conf)
-			msp_write_dem(client, 0x40, state->i2s_mode);
-
-		/* unmute */
-		msp3400c_set_audmode(client);
-		state->scan_in_progress = 0;
-		msp_update_volume(state);
-
-		/* monitor tv audio mode, the first time don't wait
-		   so long to get a quick stereo/bilingual result */
-		count = 3;
-		while (state->watch_stereo) {
-			if (msp_sleep(state, count ? 1000 : 5000))
-				goto restart;
-			if (count)
-				count--;
-			watch_stereo(client);
-		}
-	}
-	v4l_dbg(1, msp_debug, client, "thread: exit\n");
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-/* msp34xxG + (autoselect no-thread)
- * this one uses both automatic standard detection and automatic sound
- * select which are available in the newer G versions
- * struct msp: only norm, acb and source are really used in this mode
- */
-
-static int msp34xxg_modus(struct i2c_client *client)
-{
-	struct msp_state *state = to_state(i2c_get_clientdata(client));
-
-	if (state->radio) {
-		v4l_dbg(1, msp_debug, client, "selected radio modus\n");
-		return 0x0001;
-	}
-	if (state->v4l2_std == V4L2_STD_NTSC_M_JP) {
-		v4l_dbg(1, msp_debug, client, "selected M (EIA-J) modus\n");
-		return 0x4001;
-	}
-	if (state->v4l2_std == V4L2_STD_NTSC_M_KR) {
-		v4l_dbg(1, msp_debug, client, "selected M (A2) modus\n");
-		return 0x0001;
-	}
-	if (state->v4l2_std == V4L2_STD_SECAM_L) {
-		v4l_dbg(1, msp_debug, client, "selected SECAM-L modus\n");
-		return 0x6001;
-	}
-	if (state->v4l2_std & V4L2_STD_MN) {
-		v4l_dbg(1, msp_debug, client, "selected M (BTSC) modus\n");
-		return 0x2001;
-	}
-	return 0x7001;
-}
-
-static void msp34xxg_set_source(struct i2c_client *client, u16 reg, int in)
- {
-	struct msp_state *state = to_state(i2c_get_clientdata(client));
-	int source, matrix;
-
-	switch (state->audmode) {
-	case V4L2_TUNER_MODE_MONO:
-		source = 0; /* mono only */
-		matrix = 0x30;
-		break;
-	case V4L2_TUNER_MODE_LANG2:
-		source = 4; /* stereo or B */
-		matrix = 0x10;
-		break;
-	case V4L2_TUNER_MODE_LANG1_LANG2:
-		source = 1; /* stereo or A|B */
-		matrix = 0x20;
-		break;
-	case V4L2_TUNER_MODE_LANG1:
-		source = 3; /* stereo or A */
-		matrix = 0x00;
-		break;
-	case V4L2_TUNER_MODE_STEREO:
-	default:
-		source = 3; /* stereo or A */
-		matrix = 0x20;
-		break;
-	}
-
-	if (in == MSP_DSP_IN_TUNER)
-		source = (source << 8) | 0x20;
-	/* the msp34x2g puts the MAIN_AVC, MAIN and AUX sources in 12, 13, 14
-	   instead of 11, 12, 13. So we add one for that msp version. */
-	else if (in >= MSP_DSP_IN_MAIN_AVC && state->has_dolby_pro_logic)
-		source = ((in + 1) << 8) | matrix;
-	else
-		source = (in << 8) | matrix;
-
-	v4l_dbg(1, msp_debug, client,
-		"set source to %d (0x%x) for output %02x\n", in, source, reg);
-	msp_write_dsp(client, reg, source);
-}
-
-static void msp34xxg_set_sources(struct i2c_client *client)
-{
-	struct msp_state *state = to_state(i2c_get_clientdata(client));
-	u32 in = state->route_in;
-
-	msp34xxg_set_source(client, 0x0008, (in >> 4) & 0xf);
-	/* quasi-peak detector is set to same input as the loudspeaker (MAIN) */
-	msp34xxg_set_source(client, 0x000c, (in >> 4) & 0xf);
-	msp34xxg_set_source(client, 0x0009, (in >> 8) & 0xf);
-	msp34xxg_set_source(client, 0x000a, (in >> 12) & 0xf);
-	if (state->has_scart2_out)
-		msp34xxg_set_source(client, 0x0041, (in >> 16) & 0xf);
-	msp34xxg_set_source(client, 0x000b, (in >> 20) & 0xf);
-}
-
-/* (re-)initialize the msp34xxg */
-static void msp34xxg_reset(struct i2c_client *client)
-{
-	struct msp_state *state = to_state(i2c_get_clientdata(client));
-	int tuner = (state->route_in >> 3) & 1;
-	int modus;
-
-	/* initialize std to 1 (autodetect) to signal that no standard is
-	   selected yet. */
-	state->std = 1;
-
-	msp_reset(client);
-
-	if (state->has_i2s_conf)
-		msp_write_dem(client, 0x40, state->i2s_mode);
-
-	/* step-by-step initialisation, as described in the manual */
-	modus = msp34xxg_modus(client);
-	modus |= tuner ? 0x100 : 0;
-	msp_write_dem(client, 0x30, modus);
-
-	/* write the dsps that may have an influence on
-	   standard/audio autodetection right now */
-	msp34xxg_set_sources(client);
-
-	msp_write_dsp(client, 0x0d, 0x1900); /* scart */
-	msp_write_dsp(client, 0x0e, 0x3000); /* FM */
-	if (state->has_nicam)
-		msp_write_dsp(client, 0x10, 0x5a00); /* nicam */
-
-	/* set identification threshold. Personally, I
-	 * I set it to a higher value than the default
-	 * of 0x190 to ignore noisy stereo signals.
-	 * this needs tuning. (recommended range 0x00a0-0x03c0)
-	 * 0x7f0 = forced mono mode
-	 *
-	 * a2 threshold for stereo/bilingual.
-	 * Note: this register is part of the Manual/Compatibility mode.
-	 * It is supported by all 'G'-family chips.
-	 */
-	msp_write_dem(client, 0x22, msp_stereo_thresh);
-}
-
-int msp34xxg_thread(void *data)
-{
-	struct i2c_client *client = data;
-	struct msp_state *state = to_state(i2c_get_clientdata(client));
-	int val, i;
-
-	v4l_dbg(1, msp_debug, client, "msp34xxg daemon started\n");
-	state->detected_std = V4L2_STD_ALL;
-	set_freezable();
-	for (;;) {
-		v4l_dbg(2, msp_debug, client, "msp34xxg thread: sleep\n");
-		msp_sleep(state, -1);
-		v4l_dbg(2, msp_debug, client, "msp34xxg thread: wakeup\n");
-
-restart:
-		v4l_dbg(1, msp_debug, client, "thread: restart scan\n");
-		state->restart = 0;
-		if (kthread_should_stop())
-			break;
-
-		if (state->mode == MSP_MODE_EXTERN) {
-			/* no carrier scan needed, just unmute */
-			v4l_dbg(1, msp_debug, client,
-				"thread: no carrier scan\n");
-			state->scan_in_progress = 0;
-			msp_update_volume(state);
-			continue;
-		}
-
-		/* setup the chip*/
-		msp34xxg_reset(client);
-		state->std = state->radio ? 0x40 :
-			(state->force_btsc && msp_standard == 1) ? 32 : msp_standard;
-		msp_write_dem(client, 0x20, state->std);
-		/* start autodetect */
-		if (state->std != 1)
-			goto unmute;
-
-		/* watch autodetect */
-		v4l_dbg(1, msp_debug, client,
-			"started autodetect, waiting for result\n");
-		for (i = 0; i < 10; i++) {
-			if (msp_sleep(state, 100))
-				goto restart;
-
-			/* check results */
-			val = msp_read_dem(client, 0x7e);
-			if (val < 0x07ff) {
-				state->std = val;
-				break;
-			}
-			v4l_dbg(2, msp_debug, client,
-				"detection still in progress\n");
-		}
-		if (state->std == 1) {
-			v4l_dbg(1, msp_debug, client,
-				"detection still in progress after 10 tries. giving up.\n");
-			continue;
-		}
-
-unmute:
-		v4l_dbg(1, msp_debug, client,
-			"detected standard: %s (0x%04x)\n",
-			msp_standard_std_name(state->std), state->std);
-		state->detected_std = msp_standard_std(state->std);
-
-		if (state->std == 9) {
-			/* AM NICAM mode */
-			msp_write_dsp(client, 0x0e, 0x7c00);
-		}
-
-		/* unmute: dispatch sound to scart output, set scart volume */
-		msp_update_volume(state);
-
-		/* restore ACB */
-		if (msp_write_dsp(client, 0x13, state->acb))
-			return -1;
-
-		/* the periodic stereo/SAP check is only relevant for
-		   the 0x20 standard (BTSC) */
-		if (state->std != 0x20)
-			continue;
-
-		state->watch_stereo = 1;
-
-		/* monitor tv audio mode, the first time don't wait
-		   in order to get a quick stereo/SAP update */
-		watch_stereo(client);
-		while (state->watch_stereo) {
-			watch_stereo(client);
-			if (msp_sleep(state, 5000))
-				goto restart;
-		}
-	}
-	v4l_dbg(1, msp_debug, client, "thread: exit\n");
-	return 0;
-}
-
-static int msp34xxg_detect_stereo(struct i2c_client *client)
-{
-	struct msp_state *state = to_state(i2c_get_clientdata(client));
-	int status = msp_read_dem(client, 0x0200);
-	int is_bilingual = status & 0x100;
-	int is_stereo = status & 0x40;
-	int oldrx = state->rxsubchans;
-
-	if (state->mode == MSP_MODE_EXTERN)
-		return 0;
-
-	state->rxsubchans = 0;
-	if (is_stereo)
-		state->rxsubchans = V4L2_TUNER_SUB_STEREO;
-	else
-		state->rxsubchans = V4L2_TUNER_SUB_MONO;
-	if (is_bilingual) {
-		if (state->std == 0x20)
-			state->rxsubchans |= V4L2_TUNER_SUB_SAP;
-		else
-			state->rxsubchans =
-				V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
-	}
-	v4l_dbg(1, msp_debug, client,
-		"status=0x%x, stereo=%d, bilingual=%d -> rxsubchans=%d\n",
-		status, is_stereo, is_bilingual, state->rxsubchans);
-	return (oldrx != state->rxsubchans);
-}
-
-static void msp34xxg_set_audmode(struct i2c_client *client)
-{
-	struct msp_state *state = to_state(i2c_get_clientdata(client));
-
-	if (state->std == 0x20) {
-	       if ((state->rxsubchans & V4L2_TUNER_SUB_SAP) &&
-		   (state->audmode == V4L2_TUNER_MODE_LANG1_LANG2 ||
-		    state->audmode == V4L2_TUNER_MODE_LANG2)) {
-			msp_write_dem(client, 0x20, 0x21);
-	       } else {
-			msp_write_dem(client, 0x20, 0x20);
-	       }
-	}
-
-	msp34xxg_set_sources(client);
-}
-
-void msp_set_audmode(struct i2c_client *client)
-{
-	struct msp_state *state = to_state(i2c_get_clientdata(client));
-
-	switch (state->opmode) {
-	case OPMODE_MANUAL:
-	case OPMODE_AUTODETECT:
-		msp3400c_set_audmode(client);
-		break;
-	case OPMODE_AUTOSELECT:
-		msp34xxg_set_audmode(client);
-		break;
-	}
-}
-
-int msp_detect_stereo(struct i2c_client *client)
-{
-	struct msp_state *state  = to_state(i2c_get_clientdata(client));
-
-	switch (state->opmode) {
-	case OPMODE_MANUAL:
-	case OPMODE_AUTODETECT:
-		return msp3400c_detect_stereo(client);
-	case OPMODE_AUTOSELECT:
-		return msp34xxg_detect_stereo(client);
-	}
-	return 0;
-}
-
diff --git a/drivers/media/video/mt9m032.c b/drivers/media/video/mt9m032.c
deleted file mode 100644
index 445359c..0000000
--- a/drivers/media/video/mt9m032.c
+++ /dev/null
@@ -1,878 +0,0 @@
-/*
- * Driver for MT9M032 CMOS Image Sensor from Micron
- *
- * Copyright (C) 2010-2011 Lund Engineering
- * Contact: Gil Lund <gwlund@lundeng.com>
- * Author: Martin Hostettler <martin@neutronstar.dyndns.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/math64.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-#include <linux/v4l2-mediabus.h>
-
-#include <media/media-entity.h>
-#include <media/mt9m032.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-subdev.h>
-
-#include "aptina-pll.h"
-
-/*
- * width and height include active boundary and black parts
- *
- * column    0-  15 active boundary
- * column   16-1455 image
- * column 1456-1471 active boundary
- * column 1472-1599 black
- *
- * row       0-  51 black
- * row      53-  59 active boundary
- * row      60-1139 image
- * row    1140-1147 active boundary
- * row    1148-1151 black
- */
-
-#define MT9M032_PIXEL_ARRAY_WIDTH			1600
-#define MT9M032_PIXEL_ARRAY_HEIGHT			1152
-
-#define MT9M032_CHIP_VERSION				0x00
-#define		MT9M032_CHIP_VERSION_VALUE		0x1402
-#define MT9M032_ROW_START				0x01
-#define		MT9M032_ROW_START_MIN			0
-#define		MT9M032_ROW_START_MAX			1152
-#define		MT9M032_ROW_START_DEF			60
-#define MT9M032_COLUMN_START				0x02
-#define		MT9M032_COLUMN_START_MIN		0
-#define		MT9M032_COLUMN_START_MAX		1600
-#define		MT9M032_COLUMN_START_DEF		16
-#define MT9M032_ROW_SIZE				0x03
-#define		MT9M032_ROW_SIZE_MIN			32
-#define		MT9M032_ROW_SIZE_MAX			1152
-#define		MT9M032_ROW_SIZE_DEF			1080
-#define MT9M032_COLUMN_SIZE				0x04
-#define		MT9M032_COLUMN_SIZE_MIN			32
-#define		MT9M032_COLUMN_SIZE_MAX			1600
-#define		MT9M032_COLUMN_SIZE_DEF			1440
-#define MT9M032_HBLANK					0x05
-#define MT9M032_VBLANK					0x06
-#define		MT9M032_VBLANK_MAX			0x7ff
-#define MT9M032_SHUTTER_WIDTH_HIGH			0x08
-#define MT9M032_SHUTTER_WIDTH_LOW			0x09
-#define		MT9M032_SHUTTER_WIDTH_MIN		1
-#define		MT9M032_SHUTTER_WIDTH_MAX		1048575
-#define		MT9M032_SHUTTER_WIDTH_DEF		1943
-#define MT9M032_PIX_CLK_CTRL				0x0a
-#define		MT9M032_PIX_CLK_CTRL_INV_PIXCLK		0x8000
-#define MT9M032_RESTART					0x0b
-#define MT9M032_RESET					0x0d
-#define MT9M032_PLL_CONFIG1				0x11
-#define		MT9M032_PLL_CONFIG1_OUTDIV_MASK		0x3f
-#define		MT9M032_PLL_CONFIG1_MUL_SHIFT		8
-#define MT9M032_READ_MODE1				0x1e
-#define MT9M032_READ_MODE2				0x20
-#define		MT9M032_READ_MODE2_VFLIP_SHIFT		15
-#define		MT9M032_READ_MODE2_HFLIP_SHIFT		14
-#define		MT9M032_READ_MODE2_ROW_BLC		0x40
-#define MT9M032_GAIN_GREEN1				0x2b
-#define MT9M032_GAIN_BLUE				0x2c
-#define MT9M032_GAIN_RED				0x2d
-#define MT9M032_GAIN_GREEN2				0x2e
-
-/* write only */
-#define MT9M032_GAIN_ALL				0x35
-#define		MT9M032_GAIN_DIGITAL_MASK		0x7f
-#define		MT9M032_GAIN_DIGITAL_SHIFT		8
-#define		MT9M032_GAIN_AMUL_SHIFT			6
-#define		MT9M032_GAIN_ANALOG_MASK		0x3f
-#define MT9M032_FORMATTER1				0x9e
-#define MT9M032_FORMATTER2				0x9f
-#define		MT9M032_FORMATTER2_DOUT_EN		0x1000
-#define		MT9M032_FORMATTER2_PIXCLK_EN		0x2000
-
-/*
- * The available MT9M032 datasheet is missing documentation for register 0x10
- * MT9P031 seems to be close enough, so use constants from that datasheet for
- * now.
- * But keep the name MT9P031 to remind us, that this isn't really confirmed
- * for this sensor.
- */
-#define MT9P031_PLL_CONTROL				0x10
-#define		MT9P031_PLL_CONTROL_PWROFF		0x0050
-#define		MT9P031_PLL_CONTROL_PWRON		0x0051
-#define		MT9P031_PLL_CONTROL_USEPLL		0x0052
-#define MT9P031_PLL_CONFIG2				0x11
-#define		MT9P031_PLL_CONFIG2_P1_DIV_MASK		0x1f
-
-struct mt9m032 {
-	struct v4l2_subdev subdev;
-	struct media_pad pad;
-	struct mt9m032_platform_data *pdata;
-
-	unsigned int pix_clock;
-
-	struct v4l2_ctrl_handler ctrls;
-	struct {
-		struct v4l2_ctrl *hflip;
-		struct v4l2_ctrl *vflip;
-	};
-
-	struct mutex lock; /* Protects streaming, format, interval and crop */
-
-	bool streaming;
-
-	struct v4l2_mbus_framefmt format;
-	struct v4l2_rect crop;
-	struct v4l2_fract frame_interval;
-};
-
-#define to_mt9m032(sd)	container_of(sd, struct mt9m032, subdev)
-#define to_dev(sensor) \
-	(&((struct i2c_client *)v4l2_get_subdevdata(&(sensor)->subdev))->dev)
-
-static int mt9m032_read(struct i2c_client *client, u8 reg)
-{
-	return i2c_smbus_read_word_swapped(client, reg);
-}
-
-static int mt9m032_write(struct i2c_client *client, u8 reg, const u16 data)
-{
-	return i2c_smbus_write_word_swapped(client, reg, data);
-}
-
-static u32 mt9m032_row_time(struct mt9m032 *sensor, unsigned int width)
-{
-	unsigned int effective_width;
-	u32 ns;
-
-	effective_width = width + 716; /* empirical value */
-	ns = div_u64(1000000000ULL * effective_width, sensor->pix_clock);
-	dev_dbg(to_dev(sensor),	"MT9M032 line time: %u ns\n", ns);
-	return ns;
-}
-
-static int mt9m032_update_timing(struct mt9m032 *sensor,
-				 struct v4l2_fract *interval)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
-	struct v4l2_rect *crop = &sensor->crop;
-	unsigned int min_vblank;
-	unsigned int vblank;
-	u32 row_time;
-
-	if (!interval)
-		interval = &sensor->frame_interval;
-
-	row_time = mt9m032_row_time(sensor, crop->width);
-
-	vblank = div_u64(1000000000ULL * interval->numerator,
-			 (u64)row_time * interval->denominator)
-	       - crop->height;
-
-	if (vblank > MT9M032_VBLANK_MAX) {
-		/* hardware limits to 11 bit values */
-		interval->denominator = 1000;
-		interval->numerator =
-			div_u64((crop->height + MT9M032_VBLANK_MAX) *
-				(u64)row_time * interval->denominator,
-				1000000000ULL);
-		vblank = div_u64(1000000000ULL * interval->numerator,
-				 (u64)row_time * interval->denominator)
-		       - crop->height;
-	}
-	/* enforce minimal 1.6ms blanking time. */
-	min_vblank = 1600000 / row_time;
-	vblank = clamp_t(unsigned int, vblank, min_vblank, MT9M032_VBLANK_MAX);
-
-	return mt9m032_write(client, MT9M032_VBLANK, vblank);
-}
-
-static int mt9m032_update_geom_timing(struct mt9m032 *sensor)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
-	int ret;
-
-	ret = mt9m032_write(client, MT9M032_COLUMN_SIZE,
-			    sensor->crop.width - 1);
-	if (!ret)
-		ret = mt9m032_write(client, MT9M032_ROW_SIZE,
-				    sensor->crop.height - 1);
-	if (!ret)
-		ret = mt9m032_write(client, MT9M032_COLUMN_START,
-				    sensor->crop.left);
-	if (!ret)
-		ret = mt9m032_write(client, MT9M032_ROW_START,
-				    sensor->crop.top);
-	if (!ret)
-		ret = mt9m032_update_timing(sensor, NULL);
-	return ret;
-}
-
-static int update_formatter2(struct mt9m032 *sensor, bool streaming)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
-	u16 reg_val =   MT9M032_FORMATTER2_DOUT_EN
-		      | 0x0070;  /* parts reserved! */
-				 /* possibly for changing to 14-bit mode */
-
-	if (streaming)
-		reg_val |= MT9M032_FORMATTER2_PIXCLK_EN;   /* pixclock enable */
-
-	return mt9m032_write(client, MT9M032_FORMATTER2, reg_val);
-}
-
-static int mt9m032_setup_pll(struct mt9m032 *sensor)
-{
-	static const struct aptina_pll_limits limits = {
-		.ext_clock_min = 8000000,
-		.ext_clock_max = 16500000,
-		.int_clock_min = 2000000,
-		.int_clock_max = 24000000,
-		.out_clock_min = 322000000,
-		.out_clock_max = 693000000,
-		.pix_clock_max = 99000000,
-		.n_min = 1,
-		.n_max = 64,
-		.m_min = 16,
-		.m_max = 255,
-		.p1_min = 1,
-		.p1_max = 128,
-	};
-
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
-	struct mt9m032_platform_data *pdata = sensor->pdata;
-	struct aptina_pll pll;
-	int ret;
-
-	pll.ext_clock = pdata->ext_clock;
-	pll.pix_clock = pdata->pix_clock;
-
-	ret = aptina_pll_calculate(&client->dev, &limits, &pll);
-	if (ret < 0)
-		return ret;
-
-	sensor->pix_clock = pdata->pix_clock;
-
-	ret = mt9m032_write(client, MT9M032_PLL_CONFIG1,
-			    (pll.m << MT9M032_PLL_CONFIG1_MUL_SHIFT)
-			    | (pll.p1 - 1));
-	if (!ret)
-		ret = mt9m032_write(client, MT9P031_PLL_CONFIG2, pll.n - 1);
-	if (!ret)
-		ret = mt9m032_write(client, MT9P031_PLL_CONTROL,
-				    MT9P031_PLL_CONTROL_PWRON |
-				    MT9P031_PLL_CONTROL_USEPLL);
-	if (!ret)		/* more reserved, Continuous, Master Mode */
-		ret = mt9m032_write(client, MT9M032_READ_MODE1, 0x8006);
-	if (!ret)		/* Set 14-bit mode, select 7 divider */
-		ret = mt9m032_write(client, MT9M032_FORMATTER1, 0x111e);
-
-	return ret;
-}
-
-/* -----------------------------------------------------------------------------
- * Subdev pad operations
- */
-
-static int mt9m032_enum_mbus_code(struct v4l2_subdev *subdev,
-				  struct v4l2_subdev_fh *fh,
-				  struct v4l2_subdev_mbus_code_enum *code)
-{
-	if (code->index != 0)
-		return -EINVAL;
-
-	code->code = V4L2_MBUS_FMT_Y8_1X8;
-	return 0;
-}
-
-static int mt9m032_enum_frame_size(struct v4l2_subdev *subdev,
-				   struct v4l2_subdev_fh *fh,
-				   struct v4l2_subdev_frame_size_enum *fse)
-{
-	if (fse->index != 0 || fse->code != V4L2_MBUS_FMT_Y8_1X8)
-		return -EINVAL;
-
-	fse->min_width = MT9M032_COLUMN_SIZE_DEF;
-	fse->max_width = MT9M032_COLUMN_SIZE_DEF;
-	fse->min_height = MT9M032_ROW_SIZE_DEF;
-	fse->max_height = MT9M032_ROW_SIZE_DEF;
-
-	return 0;
-}
-
-/**
- * __mt9m032_get_pad_crop() - get crop rect
- * @sensor: pointer to the sensor struct
- * @fh: file handle for getting the try crop rect from
- * @which: select try or active crop rect
- *
- * Returns a pointer the current active or fh relative try crop rect
- */
-static struct v4l2_rect *
-__mt9m032_get_pad_crop(struct mt9m032 *sensor, struct v4l2_subdev_fh *fh,
-		       enum v4l2_subdev_format_whence which)
-{
-	switch (which) {
-	case V4L2_SUBDEV_FORMAT_TRY:
-		return v4l2_subdev_get_try_crop(fh, 0);
-	case V4L2_SUBDEV_FORMAT_ACTIVE:
-		return &sensor->crop;
-	default:
-		return NULL;
-	}
-}
-
-/**
- * __mt9m032_get_pad_format() - get format
- * @sensor: pointer to the sensor struct
- * @fh: file handle for getting the try format from
- * @which: select try or active format
- *
- * Returns a pointer the current active or fh relative try format
- */
-static struct v4l2_mbus_framefmt *
-__mt9m032_get_pad_format(struct mt9m032 *sensor, struct v4l2_subdev_fh *fh,
-			 enum v4l2_subdev_format_whence which)
-{
-	switch (which) {
-	case V4L2_SUBDEV_FORMAT_TRY:
-		return v4l2_subdev_get_try_format(fh, 0);
-	case V4L2_SUBDEV_FORMAT_ACTIVE:
-		return &sensor->format;
-	default:
-		return NULL;
-	}
-}
-
-static int mt9m032_get_pad_format(struct v4l2_subdev *subdev,
-				  struct v4l2_subdev_fh *fh,
-				  struct v4l2_subdev_format *fmt)
-{
-	struct mt9m032 *sensor = to_mt9m032(subdev);
-
-	mutex_lock(&sensor->lock);
-	fmt->format = *__mt9m032_get_pad_format(sensor, fh, fmt->which);
-	mutex_unlock(&sensor->lock);
-
-	return 0;
-}
-
-static int mt9m032_set_pad_format(struct v4l2_subdev *subdev,
-				  struct v4l2_subdev_fh *fh,
-				  struct v4l2_subdev_format *fmt)
-{
-	struct mt9m032 *sensor = to_mt9m032(subdev);
-	int ret;
-
-	mutex_lock(&sensor->lock);
-
-	if (sensor->streaming && fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		ret = -EBUSY;
-		goto done;
-	}
-
-	/* Scaling is not supported, the format is thus fixed. */
-	fmt->format = *__mt9m032_get_pad_format(sensor, fh, fmt->which);
-	ret = 0;
-
-done:
-	mutex_unlock(&sensor->lock);
-	return ret;
-}
-
-static int mt9m032_get_pad_crop(struct v4l2_subdev *subdev,
-				struct v4l2_subdev_fh *fh,
-				struct v4l2_subdev_crop *crop)
-{
-	struct mt9m032 *sensor = to_mt9m032(subdev);
-
-	mutex_lock(&sensor->lock);
-	crop->rect = *__mt9m032_get_pad_crop(sensor, fh, crop->which);
-	mutex_unlock(&sensor->lock);
-
-	return 0;
-}
-
-static int mt9m032_set_pad_crop(struct v4l2_subdev *subdev,
-				struct v4l2_subdev_fh *fh,
-				struct v4l2_subdev_crop *crop)
-{
-	struct mt9m032 *sensor = to_mt9m032(subdev);
-	struct v4l2_mbus_framefmt *format;
-	struct v4l2_rect *__crop;
-	struct v4l2_rect rect;
-	int ret = 0;
-
-	mutex_lock(&sensor->lock);
-
-	if (sensor->streaming && crop->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		ret = -EBUSY;
-		goto done;
-	}
-
-	/* Clamp the crop rectangle boundaries and align them to a multiple of 2
-	 * pixels to ensure a GRBG Bayer pattern.
-	 */
-	rect.left = clamp(ALIGN(crop->rect.left, 2), MT9M032_COLUMN_START_MIN,
-			  MT9M032_COLUMN_START_MAX);
-	rect.top = clamp(ALIGN(crop->rect.top, 2), MT9M032_ROW_START_MIN,
-			 MT9M032_ROW_START_MAX);
-	rect.width = clamp(ALIGN(crop->rect.width, 2), MT9M032_COLUMN_SIZE_MIN,
-			   MT9M032_COLUMN_SIZE_MAX);
-	rect.height = clamp(ALIGN(crop->rect.height, 2), MT9M032_ROW_SIZE_MIN,
-			    MT9M032_ROW_SIZE_MAX);
-
-	rect.width = min(rect.width, MT9M032_PIXEL_ARRAY_WIDTH - rect.left);
-	rect.height = min(rect.height, MT9M032_PIXEL_ARRAY_HEIGHT - rect.top);
-
-	__crop = __mt9m032_get_pad_crop(sensor, fh, crop->which);
-
-	if (rect.width != __crop->width || rect.height != __crop->height) {
-		/* Reset the output image size if the crop rectangle size has
-		 * been modified.
-		 */
-		format = __mt9m032_get_pad_format(sensor, fh, crop->which);
-		format->width = rect.width;
-		format->height = rect.height;
-	}
-
-	*__crop = rect;
-	crop->rect = rect;
-
-	if (crop->which == V4L2_SUBDEV_FORMAT_ACTIVE)
-		ret = mt9m032_update_geom_timing(sensor);
-
-done:
-	mutex_unlock(&sensor->lock);
-	return ret;
-}
-
-static int mt9m032_get_frame_interval(struct v4l2_subdev *subdev,
-				      struct v4l2_subdev_frame_interval *fi)
-{
-	struct mt9m032 *sensor = to_mt9m032(subdev);
-
-	mutex_lock(&sensor->lock);
-	memset(fi, 0, sizeof(*fi));
-	fi->interval = sensor->frame_interval;
-	mutex_unlock(&sensor->lock);
-
-	return 0;
-}
-
-static int mt9m032_set_frame_interval(struct v4l2_subdev *subdev,
-				      struct v4l2_subdev_frame_interval *fi)
-{
-	struct mt9m032 *sensor = to_mt9m032(subdev);
-	int ret;
-
-	mutex_lock(&sensor->lock);
-
-	if (sensor->streaming) {
-		ret = -EBUSY;
-		goto done;
-	}
-
-	/* Avoid divisions by 0. */
-	if (fi->interval.denominator == 0)
-		fi->interval.denominator = 1;
-
-	ret = mt9m032_update_timing(sensor, &fi->interval);
-	if (!ret)
-		sensor->frame_interval = fi->interval;
-
-done:
-	mutex_unlock(&sensor->lock);
-	return ret;
-}
-
-static int mt9m032_s_stream(struct v4l2_subdev *subdev, int streaming)
-{
-	struct mt9m032 *sensor = to_mt9m032(subdev);
-	int ret;
-
-	mutex_lock(&sensor->lock);
-	ret = update_formatter2(sensor, streaming);
-	if (!ret)
-		sensor->streaming = streaming;
-	mutex_unlock(&sensor->lock);
-
-	return ret;
-}
-
-/* -----------------------------------------------------------------------------
- * V4L2 subdev core operations
- */
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int mt9m032_g_register(struct v4l2_subdev *sd,
-			      struct v4l2_dbg_register *reg)
-{
-	struct mt9m032 *sensor = to_mt9m032(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
-	int val;
-
-	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
-		return -EINVAL;
-	if (reg->match.addr != client->addr)
-		return -ENODEV;
-
-	val = mt9m032_read(client, reg->reg);
-	if (val < 0)
-		return -EIO;
-
-	reg->size = 2;
-	reg->val = val;
-
-	return 0;
-}
-
-static int mt9m032_s_register(struct v4l2_subdev *sd,
-			      struct v4l2_dbg_register *reg)
-{
-	struct mt9m032 *sensor = to_mt9m032(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
-
-	if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff)
-		return -EINVAL;
-
-	if (reg->match.addr != client->addr)
-		return -ENODEV;
-
-	return mt9m032_write(client, reg->reg, reg->val);
-}
-#endif
-
-/* -----------------------------------------------------------------------------
- * V4L2 subdev control operations
- */
-
-static int update_read_mode2(struct mt9m032 *sensor, bool vflip, bool hflip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
-	int reg_val = (vflip << MT9M032_READ_MODE2_VFLIP_SHIFT)
-		    | (hflip << MT9M032_READ_MODE2_HFLIP_SHIFT)
-		    | MT9M032_READ_MODE2_ROW_BLC
-		    | 0x0007;
-
-	return mt9m032_write(client, MT9M032_READ_MODE2, reg_val);
-}
-
-static int mt9m032_set_gain(struct mt9m032 *sensor, s32 val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
-	int digital_gain_val;	/* in 1/8th (0..127) */
-	int analog_mul;		/* 0 or 1 */
-	int analog_gain_val;	/* in 1/16th. (0..63) */
-	u16 reg_val;
-
-	digital_gain_val = 51; /* from setup example */
-
-	if (val < 63) {
-		analog_mul = 0;
-		analog_gain_val = val;
-	} else {
-		analog_mul = 1;
-		analog_gain_val = val / 2;
-	}
-
-	/* a_gain = (1 + analog_mul) + (analog_gain_val + 1) / 16 */
-	/* overall_gain = a_gain * (1 + digital_gain_val / 8) */
-
-	reg_val = ((digital_gain_val & MT9M032_GAIN_DIGITAL_MASK)
-		   << MT9M032_GAIN_DIGITAL_SHIFT)
-		| ((analog_mul & 1) << MT9M032_GAIN_AMUL_SHIFT)
-		| (analog_gain_val & MT9M032_GAIN_ANALOG_MASK);
-
-	return mt9m032_write(client, MT9M032_GAIN_ALL, reg_val);
-}
-
-static int mt9m032_try_ctrl(struct v4l2_ctrl *ctrl)
-{
-	if (ctrl->id == V4L2_CID_GAIN && ctrl->val >= 63) {
-		/* round because of multiplier used for values >= 63 */
-		ctrl->val &= ~1;
-	}
-
-	return 0;
-}
-
-static int mt9m032_set_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct mt9m032 *sensor =
-		container_of(ctrl->handler, struct mt9m032, ctrls);
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->subdev);
-	int ret;
-
-	switch (ctrl->id) {
-	case V4L2_CID_GAIN:
-		return mt9m032_set_gain(sensor, ctrl->val);
-
-	case V4L2_CID_HFLIP:
-	/* case V4L2_CID_VFLIP: -- In the same cluster */
-		return update_read_mode2(sensor, sensor->vflip->val,
-					 sensor->hflip->val);
-
-	case V4L2_CID_EXPOSURE:
-		ret = mt9m032_write(client, MT9M032_SHUTTER_WIDTH_HIGH,
-				    (ctrl->val >> 16) & 0xffff);
-		if (ret < 0)
-			return ret;
-
-		return mt9m032_write(client, MT9M032_SHUTTER_WIDTH_LOW,
-				     ctrl->val & 0xffff);
-	}
-
-	return 0;
-}
-
-static struct v4l2_ctrl_ops mt9m032_ctrl_ops = {
-	.s_ctrl = mt9m032_set_ctrl,
-	.try_ctrl = mt9m032_try_ctrl,
-};
-
-/* -------------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops mt9m032_core_ops = {
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.g_register = mt9m032_g_register,
-	.s_register = mt9m032_s_register,
-#endif
-};
-
-static const struct v4l2_subdev_video_ops mt9m032_video_ops = {
-	.s_stream = mt9m032_s_stream,
-	.g_frame_interval = mt9m032_get_frame_interval,
-	.s_frame_interval = mt9m032_set_frame_interval,
-};
-
-static const struct v4l2_subdev_pad_ops mt9m032_pad_ops = {
-	.enum_mbus_code = mt9m032_enum_mbus_code,
-	.enum_frame_size = mt9m032_enum_frame_size,
-	.get_fmt = mt9m032_get_pad_format,
-	.set_fmt = mt9m032_set_pad_format,
-	.set_crop = mt9m032_set_pad_crop,
-	.get_crop = mt9m032_get_pad_crop,
-};
-
-static const struct v4l2_subdev_ops mt9m032_ops = {
-	.core = &mt9m032_core_ops,
-	.video = &mt9m032_video_ops,
-	.pad = &mt9m032_pad_ops,
-};
-
-/* -----------------------------------------------------------------------------
- * Driver initialization and probing
- */
-
-static int mt9m032_probe(struct i2c_client *client,
-			 const struct i2c_device_id *devid)
-{
-	struct mt9m032_platform_data *pdata = client->dev.platform_data;
-	struct i2c_adapter *adapter = client->adapter;
-	struct mt9m032 *sensor;
-	int chip_version;
-	int ret;
-
-	if (pdata == NULL) {
-		dev_err(&client->dev, "No platform data\n");
-		return -EINVAL;
-	}
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
-		dev_warn(&client->dev,
-			 "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
-		return -EIO;
-	}
-
-	if (!client->dev.platform_data)
-		return -ENODEV;
-
-	sensor = kzalloc(sizeof(*sensor), GFP_KERNEL);
-	if (sensor == NULL)
-		return -ENOMEM;
-
-	mutex_init(&sensor->lock);
-
-	sensor->pdata = pdata;
-
-	v4l2_i2c_subdev_init(&sensor->subdev, client, &mt9m032_ops);
-	sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
-
-	chip_version = mt9m032_read(client, MT9M032_CHIP_VERSION);
-	if (chip_version != MT9M032_CHIP_VERSION_VALUE) {
-		dev_err(&client->dev, "MT9M032 not detected, wrong version "
-			"0x%04x\n", chip_version);
-		ret = -ENODEV;
-		goto error_sensor;
-	}
-
-	dev_info(&client->dev, "MT9M032 detected at address 0x%02x\n",
-		 client->addr);
-
-	sensor->frame_interval.numerator = 1;
-	sensor->frame_interval.denominator = 30;
-
-	sensor->crop.left = MT9M032_COLUMN_START_DEF;
-	sensor->crop.top = MT9M032_ROW_START_DEF;
-	sensor->crop.width = MT9M032_COLUMN_SIZE_DEF;
-	sensor->crop.height = MT9M032_ROW_SIZE_DEF;
-
-	sensor->format.width = sensor->crop.width;
-	sensor->format.height = sensor->crop.height;
-	sensor->format.code = V4L2_MBUS_FMT_Y8_1X8;
-	sensor->format.field = V4L2_FIELD_NONE;
-	sensor->format.colorspace = V4L2_COLORSPACE_SRGB;
-
-	v4l2_ctrl_handler_init(&sensor->ctrls, 5);
-
-	v4l2_ctrl_new_std(&sensor->ctrls, &mt9m032_ctrl_ops,
-			  V4L2_CID_GAIN, 0, 127, 1, 64);
-
-	sensor->hflip = v4l2_ctrl_new_std(&sensor->ctrls,
-					  &mt9m032_ctrl_ops,
-					  V4L2_CID_HFLIP, 0, 1, 1, 0);
-	sensor->vflip = v4l2_ctrl_new_std(&sensor->ctrls,
-					  &mt9m032_ctrl_ops,
-					  V4L2_CID_VFLIP, 0, 1, 1, 0);
-
-	v4l2_ctrl_new_std(&sensor->ctrls, &mt9m032_ctrl_ops,
-			  V4L2_CID_EXPOSURE, MT9M032_SHUTTER_WIDTH_MIN,
-			  MT9M032_SHUTTER_WIDTH_MAX, 1,
-			  MT9M032_SHUTTER_WIDTH_DEF);
-	v4l2_ctrl_new_std(&sensor->ctrls, &mt9m032_ctrl_ops,
-			  V4L2_CID_PIXEL_RATE, pdata->pix_clock,
-			  pdata->pix_clock, 1, pdata->pix_clock);
-
-	if (sensor->ctrls.error) {
-		ret = sensor->ctrls.error;
-		dev_err(&client->dev, "control initialization error %d\n", ret);
-		goto error_ctrl;
-	}
-
-	v4l2_ctrl_cluster(2, &sensor->hflip);
-
-	sensor->subdev.ctrl_handler = &sensor->ctrls;
-	sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
-	ret = media_entity_init(&sensor->subdev.entity, 1, &sensor->pad, 0);
-	if (ret < 0)
-		goto error_ctrl;
-
-	ret = mt9m032_write(client, MT9M032_RESET, 1);	/* reset on */
-	if (ret < 0)
-		goto error_entity;
-	mt9m032_write(client, MT9M032_RESET, 0);	/* reset off */
-	if (ret < 0)
-		goto error_entity;
-
-	ret = mt9m032_setup_pll(sensor);
-	if (ret < 0)
-		goto error_entity;
-	usleep_range(10000, 11000);
-
-	ret = v4l2_ctrl_handler_setup(&sensor->ctrls);
-	if (ret < 0)
-		goto error_entity;
-
-	/* SIZE */
-	ret = mt9m032_update_geom_timing(sensor);
-	if (ret < 0)
-		goto error_entity;
-
-	ret = mt9m032_write(client, 0x41, 0x0000);	/* reserved !!! */
-	if (ret < 0)
-		goto error_entity;
-	ret = mt9m032_write(client, 0x42, 0x0003);	/* reserved !!! */
-	if (ret < 0)
-		goto error_entity;
-	ret = mt9m032_write(client, 0x43, 0x0003);	/* reserved !!! */
-	if (ret < 0)
-		goto error_entity;
-	ret = mt9m032_write(client, 0x7f, 0x0000);	/* reserved !!! */
-	if (ret < 0)
-		goto error_entity;
-	if (sensor->pdata->invert_pixclock) {
-		ret = mt9m032_write(client, MT9M032_PIX_CLK_CTRL,
-				    MT9M032_PIX_CLK_CTRL_INV_PIXCLK);
-		if (ret < 0)
-			goto error_entity;
-	}
-
-	ret = mt9m032_write(client, MT9M032_RESTART, 1); /* Restart on */
-	if (ret < 0)
-		goto error_entity;
-	msleep(100);
-	ret = mt9m032_write(client, MT9M032_RESTART, 0); /* Restart off */
-	if (ret < 0)
-		goto error_entity;
-	msleep(100);
-	ret = update_formatter2(sensor, false);
-	if (ret < 0)
-		goto error_entity;
-
-	return ret;
-
-error_entity:
-	media_entity_cleanup(&sensor->subdev.entity);
-error_ctrl:
-	v4l2_ctrl_handler_free(&sensor->ctrls);
-error_sensor:
-	mutex_destroy(&sensor->lock);
-	kfree(sensor);
-	return ret;
-}
-
-static int mt9m032_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
-	struct mt9m032 *sensor = to_mt9m032(subdev);
-
-	v4l2_device_unregister_subdev(subdev);
-	v4l2_ctrl_handler_free(&sensor->ctrls);
-	media_entity_cleanup(&subdev->entity);
-	mutex_destroy(&sensor->lock);
-	kfree(sensor);
-	return 0;
-}
-
-static const struct i2c_device_id mt9m032_id_table[] = {
-	{ MT9M032_NAME, 0 },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(i2c, mt9m032_id_table);
-
-static struct i2c_driver mt9m032_i2c_driver = {
-	.driver = {
-		.name = MT9M032_NAME,
-	},
-	.probe = mt9m032_probe,
-	.remove = mt9m032_remove,
-	.id_table = mt9m032_id_table,
-};
-
-module_i2c_driver(mt9m032_i2c_driver);
-
-MODULE_AUTHOR("Martin Hostettler <martin@neutronstar.dyndns.org>");
-MODULE_DESCRIPTION("MT9M032 camera sensor driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/video/mt9p031.c b/drivers/media/video/mt9p031.c
deleted file mode 100644
index 3be537e..0000000
--- a/drivers/media/video/mt9p031.c
+++ /dev/null
@@ -1,1071 +0,0 @@
-/*
- * Driver for MT9P031 CMOS Image Sensor from Aptina
- *
- * Copyright (C) 2011, Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- * Copyright (C) 2011, Javier Martin <javier.martin@vista-silicon.com>
- * Copyright (C) 2011, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
- *
- * Based on the MT9V032 driver and Bastian Hecht's code.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/i2c.h>
-#include <linux/log2.h>
-#include <linux/pm.h>
-#include <linux/slab.h>
-#include <linux/videodev2.h>
-
-#include <media/mt9p031.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-subdev.h>
-
-#include "aptina-pll.h"
-
-#define MT9P031_PIXEL_ARRAY_WIDTH			2752
-#define MT9P031_PIXEL_ARRAY_HEIGHT			2004
-
-#define MT9P031_CHIP_VERSION				0x00
-#define		MT9P031_CHIP_VERSION_VALUE		0x1801
-#define MT9P031_ROW_START				0x01
-#define		MT9P031_ROW_START_MIN			0
-#define		MT9P031_ROW_START_MAX			2004
-#define		MT9P031_ROW_START_DEF			54
-#define MT9P031_COLUMN_START				0x02
-#define		MT9P031_COLUMN_START_MIN		0
-#define		MT9P031_COLUMN_START_MAX		2750
-#define		MT9P031_COLUMN_START_DEF		16
-#define MT9P031_WINDOW_HEIGHT				0x03
-#define		MT9P031_WINDOW_HEIGHT_MIN		2
-#define		MT9P031_WINDOW_HEIGHT_MAX		2006
-#define		MT9P031_WINDOW_HEIGHT_DEF		1944
-#define MT9P031_WINDOW_WIDTH				0x04
-#define		MT9P031_WINDOW_WIDTH_MIN		2
-#define		MT9P031_WINDOW_WIDTH_MAX		2752
-#define		MT9P031_WINDOW_WIDTH_DEF		2592
-#define MT9P031_HORIZONTAL_BLANK			0x05
-#define		MT9P031_HORIZONTAL_BLANK_MIN		0
-#define		MT9P031_HORIZONTAL_BLANK_MAX		4095
-#define MT9P031_VERTICAL_BLANK				0x06
-#define		MT9P031_VERTICAL_BLANK_MIN		0
-#define		MT9P031_VERTICAL_BLANK_MAX		4095
-#define		MT9P031_VERTICAL_BLANK_DEF		25
-#define MT9P031_OUTPUT_CONTROL				0x07
-#define		MT9P031_OUTPUT_CONTROL_CEN		2
-#define		MT9P031_OUTPUT_CONTROL_SYN		1
-#define		MT9P031_OUTPUT_CONTROL_DEF		0x1f82
-#define MT9P031_SHUTTER_WIDTH_UPPER			0x08
-#define MT9P031_SHUTTER_WIDTH_LOWER			0x09
-#define		MT9P031_SHUTTER_WIDTH_MIN		1
-#define		MT9P031_SHUTTER_WIDTH_MAX		1048575
-#define		MT9P031_SHUTTER_WIDTH_DEF		1943
-#define	MT9P031_PLL_CONTROL				0x10
-#define		MT9P031_PLL_CONTROL_PWROFF		0x0050
-#define		MT9P031_PLL_CONTROL_PWRON		0x0051
-#define		MT9P031_PLL_CONTROL_USEPLL		0x0052
-#define	MT9P031_PLL_CONFIG_1				0x11
-#define	MT9P031_PLL_CONFIG_2				0x12
-#define MT9P031_PIXEL_CLOCK_CONTROL			0x0a
-#define MT9P031_FRAME_RESTART				0x0b
-#define MT9P031_SHUTTER_DELAY				0x0c
-#define MT9P031_RST					0x0d
-#define		MT9P031_RST_ENABLE			1
-#define		MT9P031_RST_DISABLE			0
-#define MT9P031_READ_MODE_1				0x1e
-#define MT9P031_READ_MODE_2				0x20
-#define		MT9P031_READ_MODE_2_ROW_MIR		(1 << 15)
-#define		MT9P031_READ_MODE_2_COL_MIR		(1 << 14)
-#define		MT9P031_READ_MODE_2_ROW_BLC		(1 << 6)
-#define MT9P031_ROW_ADDRESS_MODE			0x22
-#define MT9P031_COLUMN_ADDRESS_MODE			0x23
-#define MT9P031_GLOBAL_GAIN				0x35
-#define		MT9P031_GLOBAL_GAIN_MIN			8
-#define		MT9P031_GLOBAL_GAIN_MAX			1024
-#define		MT9P031_GLOBAL_GAIN_DEF			8
-#define		MT9P031_GLOBAL_GAIN_MULT		(1 << 6)
-#define MT9P031_ROW_BLACK_TARGET			0x49
-#define MT9P031_ROW_BLACK_DEF_OFFSET			0x4b
-#define MT9P031_GREEN1_OFFSET				0x60
-#define MT9P031_GREEN2_OFFSET				0x61
-#define MT9P031_BLACK_LEVEL_CALIBRATION			0x62
-#define		MT9P031_BLC_MANUAL_BLC			(1 << 0)
-#define MT9P031_RED_OFFSET				0x63
-#define MT9P031_BLUE_OFFSET				0x64
-#define MT9P031_TEST_PATTERN				0xa0
-#define		MT9P031_TEST_PATTERN_SHIFT		3
-#define		MT9P031_TEST_PATTERN_ENABLE		(1 << 0)
-#define		MT9P031_TEST_PATTERN_DISABLE		(0 << 0)
-#define MT9P031_TEST_PATTERN_GREEN			0xa1
-#define MT9P031_TEST_PATTERN_RED			0xa2
-#define MT9P031_TEST_PATTERN_BLUE			0xa3
-
-enum mt9p031_model {
-	MT9P031_MODEL_COLOR,
-	MT9P031_MODEL_MONOCHROME,
-};
-
-struct mt9p031 {
-	struct v4l2_subdev subdev;
-	struct media_pad pad;
-	struct v4l2_rect crop;  /* Sensor window */
-	struct v4l2_mbus_framefmt format;
-	struct mt9p031_platform_data *pdata;
-	struct mutex power_lock; /* lock to protect power_count */
-	int power_count;
-
-	enum mt9p031_model model;
-	struct aptina_pll pll;
-	int reset;
-
-	struct v4l2_ctrl_handler ctrls;
-	struct v4l2_ctrl *blc_auto;
-	struct v4l2_ctrl *blc_offset;
-
-	/* Registers cache */
-	u16 output_control;
-	u16 mode2;
-};
-
-static struct mt9p031 *to_mt9p031(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct mt9p031, subdev);
-}
-
-static int mt9p031_read(struct i2c_client *client, u8 reg)
-{
-	return i2c_smbus_read_word_swapped(client, reg);
-}
-
-static int mt9p031_write(struct i2c_client *client, u8 reg, u16 data)
-{
-	return i2c_smbus_write_word_swapped(client, reg, data);
-}
-
-static int mt9p031_set_output_control(struct mt9p031 *mt9p031, u16 clear,
-				      u16 set)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
-	u16 value = (mt9p031->output_control & ~clear) | set;
-	int ret;
-
-	ret = mt9p031_write(client, MT9P031_OUTPUT_CONTROL, value);
-	if (ret < 0)
-		return ret;
-
-	mt9p031->output_control = value;
-	return 0;
-}
-
-static int mt9p031_set_mode2(struct mt9p031 *mt9p031, u16 clear, u16 set)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
-	u16 value = (mt9p031->mode2 & ~clear) | set;
-	int ret;
-
-	ret = mt9p031_write(client, MT9P031_READ_MODE_2, value);
-	if (ret < 0)
-		return ret;
-
-	mt9p031->mode2 = value;
-	return 0;
-}
-
-static int mt9p031_reset(struct mt9p031 *mt9p031)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
-	int ret;
-
-	/* Disable chip output, synchronous option update */
-	ret = mt9p031_write(client, MT9P031_RST, MT9P031_RST_ENABLE);
-	if (ret < 0)
-		return ret;
-	ret = mt9p031_write(client, MT9P031_RST, MT9P031_RST_DISABLE);
-	if (ret < 0)
-		return ret;
-
-	return mt9p031_set_output_control(mt9p031, MT9P031_OUTPUT_CONTROL_CEN,
-					  0);
-}
-
-static int mt9p031_pll_setup(struct mt9p031 *mt9p031)
-{
-	static const struct aptina_pll_limits limits = {
-		.ext_clock_min = 6000000,
-		.ext_clock_max = 27000000,
-		.int_clock_min = 2000000,
-		.int_clock_max = 13500000,
-		.out_clock_min = 180000000,
-		.out_clock_max = 360000000,
-		.pix_clock_max = 96000000,
-		.n_min = 1,
-		.n_max = 64,
-		.m_min = 16,
-		.m_max = 255,
-		.p1_min = 1,
-		.p1_max = 128,
-	};
-
-	struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
-	struct mt9p031_platform_data *pdata = mt9p031->pdata;
-
-	mt9p031->pll.ext_clock = pdata->ext_freq;
-	mt9p031->pll.pix_clock = pdata->target_freq;
-
-	return aptina_pll_calculate(&client->dev, &limits, &mt9p031->pll);
-}
-
-static int mt9p031_pll_enable(struct mt9p031 *mt9p031)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
-	int ret;
-
-	ret = mt9p031_write(client, MT9P031_PLL_CONTROL,
-			    MT9P031_PLL_CONTROL_PWRON);
-	if (ret < 0)
-		return ret;
-
-	ret = mt9p031_write(client, MT9P031_PLL_CONFIG_1,
-			    (mt9p031->pll.m << 8) | (mt9p031->pll.n - 1));
-	if (ret < 0)
-		return ret;
-
-	ret = mt9p031_write(client, MT9P031_PLL_CONFIG_2, mt9p031->pll.p1 - 1);
-	if (ret < 0)
-		return ret;
-
-	usleep_range(1000, 2000);
-	ret = mt9p031_write(client, MT9P031_PLL_CONTROL,
-			    MT9P031_PLL_CONTROL_PWRON |
-			    MT9P031_PLL_CONTROL_USEPLL);
-	return ret;
-}
-
-static inline int mt9p031_pll_disable(struct mt9p031 *mt9p031)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
-
-	return mt9p031_write(client, MT9P031_PLL_CONTROL,
-			     MT9P031_PLL_CONTROL_PWROFF);
-}
-
-static int mt9p031_power_on(struct mt9p031 *mt9p031)
-{
-	/* Ensure RESET_BAR is low */
-	if (mt9p031->reset != -1) {
-		gpio_set_value(mt9p031->reset, 0);
-		usleep_range(1000, 2000);
-	}
-
-	/* Emable clock */
-	if (mt9p031->pdata->set_xclk)
-		mt9p031->pdata->set_xclk(&mt9p031->subdev,
-					 mt9p031->pdata->ext_freq);
-
-	/* Now RESET_BAR must be high */
-	if (mt9p031->reset != -1) {
-		gpio_set_value(mt9p031->reset, 1);
-		usleep_range(1000, 2000);
-	}
-
-	return 0;
-}
-
-static void mt9p031_power_off(struct mt9p031 *mt9p031)
-{
-	if (mt9p031->reset != -1) {
-		gpio_set_value(mt9p031->reset, 0);
-		usleep_range(1000, 2000);
-	}
-
-	if (mt9p031->pdata->set_xclk)
-		mt9p031->pdata->set_xclk(&mt9p031->subdev, 0);
-}
-
-static int __mt9p031_set_power(struct mt9p031 *mt9p031, bool on)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
-	int ret;
-
-	if (!on) {
-		mt9p031_power_off(mt9p031);
-		return 0;
-	}
-
-	ret = mt9p031_power_on(mt9p031);
-	if (ret < 0)
-		return ret;
-
-	ret = mt9p031_reset(mt9p031);
-	if (ret < 0) {
-		dev_err(&client->dev, "Failed to reset the camera\n");
-		return ret;
-	}
-
-	return v4l2_ctrl_handler_setup(&mt9p031->ctrls);
-}
-
-/* -----------------------------------------------------------------------------
- * V4L2 subdev video operations
- */
-
-static int mt9p031_set_params(struct mt9p031 *mt9p031)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
-	struct v4l2_mbus_framefmt *format = &mt9p031->format;
-	const struct v4l2_rect *crop = &mt9p031->crop;
-	unsigned int hblank;
-	unsigned int vblank;
-	unsigned int xskip;
-	unsigned int yskip;
-	unsigned int xbin;
-	unsigned int ybin;
-	int ret;
-
-	/* Windows position and size.
-	 *
-	 * TODO: Make sure the start coordinates and window size match the
-	 * skipping, binning and mirroring (see description of registers 2 and 4
-	 * in table 13, and Binning section on page 41).
-	 */
-	ret = mt9p031_write(client, MT9P031_COLUMN_START, crop->left);
-	if (ret < 0)
-		return ret;
-	ret = mt9p031_write(client, MT9P031_ROW_START, crop->top);
-	if (ret < 0)
-		return ret;
-	ret = mt9p031_write(client, MT9P031_WINDOW_WIDTH, crop->width - 1);
-	if (ret < 0)
-		return ret;
-	ret = mt9p031_write(client, MT9P031_WINDOW_HEIGHT, crop->height - 1);
-	if (ret < 0)
-		return ret;
-
-	/* Row and column binning and skipping. Use the maximum binning value
-	 * compatible with the skipping settings.
-	 */
-	xskip = DIV_ROUND_CLOSEST(crop->width, format->width);
-	yskip = DIV_ROUND_CLOSEST(crop->height, format->height);
-	xbin = 1 << (ffs(xskip) - 1);
-	ybin = 1 << (ffs(yskip) - 1);
-
-	ret = mt9p031_write(client, MT9P031_COLUMN_ADDRESS_MODE,
-			    ((xbin - 1) << 4) | (xskip - 1));
-	if (ret < 0)
-		return ret;
-	ret = mt9p031_write(client, MT9P031_ROW_ADDRESS_MODE,
-			    ((ybin - 1) << 4) | (yskip - 1));
-	if (ret < 0)
-		return ret;
-
-	/* Blanking - use minimum value for horizontal blanking and default
-	 * value for vertical blanking.
-	 */
-	hblank = 346 * ybin + 64 + (80 >> max_t(unsigned int, xbin, 3));
-	vblank = MT9P031_VERTICAL_BLANK_DEF;
-
-	ret = mt9p031_write(client, MT9P031_HORIZONTAL_BLANK, hblank);
-	if (ret < 0)
-		return ret;
-	ret = mt9p031_write(client, MT9P031_VERTICAL_BLANK, vblank);
-	if (ret < 0)
-		return ret;
-
-	return ret;
-}
-
-static int mt9p031_s_stream(struct v4l2_subdev *subdev, int enable)
-{
-	struct mt9p031 *mt9p031 = to_mt9p031(subdev);
-	int ret;
-
-	if (!enable) {
-		/* Stop sensor readout */
-		ret = mt9p031_set_output_control(mt9p031,
-						 MT9P031_OUTPUT_CONTROL_CEN, 0);
-		if (ret < 0)
-			return ret;
-
-		return mt9p031_pll_disable(mt9p031);
-	}
-
-	ret = mt9p031_set_params(mt9p031);
-	if (ret < 0)
-		return ret;
-
-	/* Switch to master "normal" mode */
-	ret = mt9p031_set_output_control(mt9p031, 0,
-					 MT9P031_OUTPUT_CONTROL_CEN);
-	if (ret < 0)
-		return ret;
-
-	return mt9p031_pll_enable(mt9p031);
-}
-
-static int mt9p031_enum_mbus_code(struct v4l2_subdev *subdev,
-				  struct v4l2_subdev_fh *fh,
-				  struct v4l2_subdev_mbus_code_enum *code)
-{
-	struct mt9p031 *mt9p031 = to_mt9p031(subdev);
-
-	if (code->pad || code->index)
-		return -EINVAL;
-
-	code->code = mt9p031->format.code;
-	return 0;
-}
-
-static int mt9p031_enum_frame_size(struct v4l2_subdev *subdev,
-				   struct v4l2_subdev_fh *fh,
-				   struct v4l2_subdev_frame_size_enum *fse)
-{
-	struct mt9p031 *mt9p031 = to_mt9p031(subdev);
-
-	if (fse->index >= 8 || fse->code != mt9p031->format.code)
-		return -EINVAL;
-
-	fse->min_width = MT9P031_WINDOW_WIDTH_DEF
-		       / min_t(unsigned int, 7, fse->index + 1);
-	fse->max_width = fse->min_width;
-	fse->min_height = MT9P031_WINDOW_HEIGHT_DEF / (fse->index + 1);
-	fse->max_height = fse->min_height;
-
-	return 0;
-}
-
-static struct v4l2_mbus_framefmt *
-__mt9p031_get_pad_format(struct mt9p031 *mt9p031, struct v4l2_subdev_fh *fh,
-			 unsigned int pad, u32 which)
-{
-	switch (which) {
-	case V4L2_SUBDEV_FORMAT_TRY:
-		return v4l2_subdev_get_try_format(fh, pad);
-	case V4L2_SUBDEV_FORMAT_ACTIVE:
-		return &mt9p031->format;
-	default:
-		return NULL;
-	}
-}
-
-static struct v4l2_rect *
-__mt9p031_get_pad_crop(struct mt9p031 *mt9p031, struct v4l2_subdev_fh *fh,
-		     unsigned int pad, u32 which)
-{
-	switch (which) {
-	case V4L2_SUBDEV_FORMAT_TRY:
-		return v4l2_subdev_get_try_crop(fh, pad);
-	case V4L2_SUBDEV_FORMAT_ACTIVE:
-		return &mt9p031->crop;
-	default:
-		return NULL;
-	}
-}
-
-static int mt9p031_get_format(struct v4l2_subdev *subdev,
-			      struct v4l2_subdev_fh *fh,
-			      struct v4l2_subdev_format *fmt)
-{
-	struct mt9p031 *mt9p031 = to_mt9p031(subdev);
-
-	fmt->format = *__mt9p031_get_pad_format(mt9p031, fh, fmt->pad,
-						fmt->which);
-	return 0;
-}
-
-static int mt9p031_set_format(struct v4l2_subdev *subdev,
-			      struct v4l2_subdev_fh *fh,
-			      struct v4l2_subdev_format *format)
-{
-	struct mt9p031 *mt9p031 = to_mt9p031(subdev);
-	struct v4l2_mbus_framefmt *__format;
-	struct v4l2_rect *__crop;
-	unsigned int width;
-	unsigned int height;
-	unsigned int hratio;
-	unsigned int vratio;
-
-	__crop = __mt9p031_get_pad_crop(mt9p031, fh, format->pad,
-					format->which);
-
-	/* Clamp the width and height to avoid dividing by zero. */
-	width = clamp_t(unsigned int, ALIGN(format->format.width, 2),
-			max(__crop->width / 7, MT9P031_WINDOW_WIDTH_MIN),
-			__crop->width);
-	height = clamp_t(unsigned int, ALIGN(format->format.height, 2),
-			max(__crop->height / 8, MT9P031_WINDOW_HEIGHT_MIN),
-			__crop->height);
-
-	hratio = DIV_ROUND_CLOSEST(__crop->width, width);
-	vratio = DIV_ROUND_CLOSEST(__crop->height, height);
-
-	__format = __mt9p031_get_pad_format(mt9p031, fh, format->pad,
-					    format->which);
-	__format->width = __crop->width / hratio;
-	__format->height = __crop->height / vratio;
-
-	format->format = *__format;
-
-	return 0;
-}
-
-static int mt9p031_get_crop(struct v4l2_subdev *subdev,
-			    struct v4l2_subdev_fh *fh,
-			    struct v4l2_subdev_crop *crop)
-{
-	struct mt9p031 *mt9p031 = to_mt9p031(subdev);
-
-	crop->rect = *__mt9p031_get_pad_crop(mt9p031, fh, crop->pad,
-					     crop->which);
-	return 0;
-}
-
-static int mt9p031_set_crop(struct v4l2_subdev *subdev,
-			    struct v4l2_subdev_fh *fh,
-			    struct v4l2_subdev_crop *crop)
-{
-	struct mt9p031 *mt9p031 = to_mt9p031(subdev);
-	struct v4l2_mbus_framefmt *__format;
-	struct v4l2_rect *__crop;
-	struct v4l2_rect rect;
-
-	/* Clamp the crop rectangle boundaries and align them to a multiple of 2
-	 * pixels to ensure a GRBG Bayer pattern.
-	 */
-	rect.left = clamp(ALIGN(crop->rect.left, 2), MT9P031_COLUMN_START_MIN,
-			  MT9P031_COLUMN_START_MAX);
-	rect.top = clamp(ALIGN(crop->rect.top, 2), MT9P031_ROW_START_MIN,
-			 MT9P031_ROW_START_MAX);
-	rect.width = clamp(ALIGN(crop->rect.width, 2),
-			   MT9P031_WINDOW_WIDTH_MIN,
-			   MT9P031_WINDOW_WIDTH_MAX);
-	rect.height = clamp(ALIGN(crop->rect.height, 2),
-			    MT9P031_WINDOW_HEIGHT_MIN,
-			    MT9P031_WINDOW_HEIGHT_MAX);
-
-	rect.width = min(rect.width, MT9P031_PIXEL_ARRAY_WIDTH - rect.left);
-	rect.height = min(rect.height, MT9P031_PIXEL_ARRAY_HEIGHT - rect.top);
-
-	__crop = __mt9p031_get_pad_crop(mt9p031, fh, crop->pad, crop->which);
-
-	if (rect.width != __crop->width || rect.height != __crop->height) {
-		/* Reset the output image size if the crop rectangle size has
-		 * been modified.
-		 */
-		__format = __mt9p031_get_pad_format(mt9p031, fh, crop->pad,
-						    crop->which);
-		__format->width = rect.width;
-		__format->height = rect.height;
-	}
-
-	*__crop = rect;
-	crop->rect = rect;
-
-	return 0;
-}
-
-/* -----------------------------------------------------------------------------
- * V4L2 subdev control operations
- */
-
-#define V4L2_CID_TEST_PATTERN		(V4L2_CID_USER_BASE | 0x1001)
-#define V4L2_CID_BLC_AUTO		(V4L2_CID_USER_BASE | 0x1002)
-#define V4L2_CID_BLC_TARGET_LEVEL	(V4L2_CID_USER_BASE | 0x1003)
-#define V4L2_CID_BLC_ANALOG_OFFSET	(V4L2_CID_USER_BASE | 0x1004)
-#define V4L2_CID_BLC_DIGITAL_OFFSET	(V4L2_CID_USER_BASE | 0x1005)
-
-static int mt9p031_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct mt9p031 *mt9p031 =
-			container_of(ctrl->handler, struct mt9p031, ctrls);
-	struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev);
-	u16 data;
-	int ret;
-
-	switch (ctrl->id) {
-	case V4L2_CID_EXPOSURE:
-		ret = mt9p031_write(client, MT9P031_SHUTTER_WIDTH_UPPER,
-				    (ctrl->val >> 16) & 0xffff);
-		if (ret < 0)
-			return ret;
-
-		return mt9p031_write(client, MT9P031_SHUTTER_WIDTH_LOWER,
-				     ctrl->val & 0xffff);
-
-	case V4L2_CID_GAIN:
-		/* Gain is controlled by 2 analog stages and a digital stage.
-		 * Valid values for the 3 stages are
-		 *
-		 * Stage                Min     Max     Step
-		 * ------------------------------------------
-		 * First analog stage   x1      x2      1
-		 * Second analog stage  x1      x4      0.125
-		 * Digital stage        x1      x16     0.125
-		 *
-		 * To minimize noise, the gain stages should be used in the
-		 * second analog stage, first analog stage, digital stage order.
-		 * Gain from a previous stage should be pushed to its maximum
-		 * value before the next stage is used.
-		 */
-		if (ctrl->val <= 32) {
-			data = ctrl->val;
-		} else if (ctrl->val <= 64) {
-			ctrl->val &= ~1;
-			data = (1 << 6) | (ctrl->val >> 1);
-		} else {
-			ctrl->val &= ~7;
-			data = ((ctrl->val - 64) << 5) | (1 << 6) | 32;
-		}
-
-		return mt9p031_write(client, MT9P031_GLOBAL_GAIN, data);
-
-	case V4L2_CID_HFLIP:
-		if (ctrl->val)
-			return mt9p031_set_mode2(mt9p031,
-					0, MT9P031_READ_MODE_2_COL_MIR);
-		else
-			return mt9p031_set_mode2(mt9p031,
-					MT9P031_READ_MODE_2_COL_MIR, 0);
-
-	case V4L2_CID_VFLIP:
-		if (ctrl->val)
-			return mt9p031_set_mode2(mt9p031,
-					0, MT9P031_READ_MODE_2_ROW_MIR);
-		else
-			return mt9p031_set_mode2(mt9p031,
-					MT9P031_READ_MODE_2_ROW_MIR, 0);
-
-	case V4L2_CID_TEST_PATTERN:
-		if (!ctrl->val) {
-			/* Restore the black level compensation settings. */
-			if (mt9p031->blc_auto->cur.val != 0) {
-				ret = mt9p031_s_ctrl(mt9p031->blc_auto);
-				if (ret < 0)
-					return ret;
-			}
-			if (mt9p031->blc_offset->cur.val != 0) {
-				ret = mt9p031_s_ctrl(mt9p031->blc_offset);
-				if (ret < 0)
-					return ret;
-			}
-			return mt9p031_write(client, MT9P031_TEST_PATTERN,
-					     MT9P031_TEST_PATTERN_DISABLE);
-		}
-
-		ret = mt9p031_write(client, MT9P031_TEST_PATTERN_GREEN, 0x05a0);
-		if (ret < 0)
-			return ret;
-		ret = mt9p031_write(client, MT9P031_TEST_PATTERN_RED, 0x0a50);
-		if (ret < 0)
-			return ret;
-		ret = mt9p031_write(client, MT9P031_TEST_PATTERN_BLUE, 0x0aa0);
-		if (ret < 0)
-			return ret;
-
-		/* Disable digital black level compensation when using a test
-		 * pattern.
-		 */
-		ret = mt9p031_set_mode2(mt9p031, MT9P031_READ_MODE_2_ROW_BLC,
-					0);
-		if (ret < 0)
-			return ret;
-
-		ret = mt9p031_write(client, MT9P031_ROW_BLACK_DEF_OFFSET, 0);
-		if (ret < 0)
-			return ret;
-
-		return mt9p031_write(client, MT9P031_TEST_PATTERN,
-				((ctrl->val - 1) << MT9P031_TEST_PATTERN_SHIFT)
-				| MT9P031_TEST_PATTERN_ENABLE);
-
-	case V4L2_CID_BLC_AUTO:
-		ret = mt9p031_set_mode2(mt9p031,
-				ctrl->val ? 0 : MT9P031_READ_MODE_2_ROW_BLC,
-				ctrl->val ? MT9P031_READ_MODE_2_ROW_BLC : 0);
-		if (ret < 0)
-			return ret;
-
-		return mt9p031_write(client, MT9P031_BLACK_LEVEL_CALIBRATION,
-				     ctrl->val ? 0 : MT9P031_BLC_MANUAL_BLC);
-
-	case V4L2_CID_BLC_TARGET_LEVEL:
-		return mt9p031_write(client, MT9P031_ROW_BLACK_TARGET,
-				     ctrl->val);
-
-	case V4L2_CID_BLC_ANALOG_OFFSET:
-		data = ctrl->val & ((1 << 9) - 1);
-
-		ret = mt9p031_write(client, MT9P031_GREEN1_OFFSET, data);
-		if (ret < 0)
-			return ret;
-		ret = mt9p031_write(client, MT9P031_GREEN2_OFFSET, data);
-		if (ret < 0)
-			return ret;
-		ret = mt9p031_write(client, MT9P031_RED_OFFSET, data);
-		if (ret < 0)
-			return ret;
-		return mt9p031_write(client, MT9P031_BLUE_OFFSET, data);
-
-	case V4L2_CID_BLC_DIGITAL_OFFSET:
-		return mt9p031_write(client, MT9P031_ROW_BLACK_DEF_OFFSET,
-				     ctrl->val & ((1 << 12) - 1));
-	}
-
-	return 0;
-}
-
-static struct v4l2_ctrl_ops mt9p031_ctrl_ops = {
-	.s_ctrl = mt9p031_s_ctrl,
-};
-
-static const char * const mt9p031_test_pattern_menu[] = {
-	"Disabled",
-	"Color Field",
-	"Horizontal Gradient",
-	"Vertical Gradient",
-	"Diagonal Gradient",
-	"Classic Test Pattern",
-	"Walking 1s",
-	"Monochrome Horizontal Bars",
-	"Monochrome Vertical Bars",
-	"Vertical Color Bars",
-};
-
-static const struct v4l2_ctrl_config mt9p031_ctrls[] = {
-	{
-		.ops		= &mt9p031_ctrl_ops,
-		.id		= V4L2_CID_TEST_PATTERN,
-		.type		= V4L2_CTRL_TYPE_MENU,
-		.name		= "Test Pattern",
-		.min		= 0,
-		.max		= ARRAY_SIZE(mt9p031_test_pattern_menu) - 1,
-		.step		= 0,
-		.def		= 0,
-		.flags		= 0,
-		.menu_skip_mask	= 0,
-		.qmenu		= mt9p031_test_pattern_menu,
-	}, {
-		.ops		= &mt9p031_ctrl_ops,
-		.id		= V4L2_CID_BLC_AUTO,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "BLC, Auto",
-		.min		= 0,
-		.max		= 1,
-		.step		= 1,
-		.def		= 1,
-		.flags		= 0,
-	}, {
-		.ops		= &mt9p031_ctrl_ops,
-		.id		= V4L2_CID_BLC_TARGET_LEVEL,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "BLC Target Level",
-		.min		= 0,
-		.max		= 4095,
-		.step		= 1,
-		.def		= 168,
-		.flags		= 0,
-	}, {
-		.ops		= &mt9p031_ctrl_ops,
-		.id		= V4L2_CID_BLC_ANALOG_OFFSET,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "BLC Analog Offset",
-		.min		= -255,
-		.max		= 255,
-		.step		= 1,
-		.def		= 32,
-		.flags		= 0,
-	}, {
-		.ops		= &mt9p031_ctrl_ops,
-		.id		= V4L2_CID_BLC_DIGITAL_OFFSET,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "BLC Digital Offset",
-		.min		= -2048,
-		.max		= 2047,
-		.step		= 1,
-		.def		= 40,
-		.flags		= 0,
-	}
-};
-
-/* -----------------------------------------------------------------------------
- * V4L2 subdev core operations
- */
-
-static int mt9p031_set_power(struct v4l2_subdev *subdev, int on)
-{
-	struct mt9p031 *mt9p031 = to_mt9p031(subdev);
-	int ret = 0;
-
-	mutex_lock(&mt9p031->power_lock);
-
-	/* If the power count is modified from 0 to != 0 or from != 0 to 0,
-	 * update the power state.
-	 */
-	if (mt9p031->power_count == !on) {
-		ret = __mt9p031_set_power(mt9p031, !!on);
-		if (ret < 0)
-			goto out;
-	}
-
-	/* Update the power count. */
-	mt9p031->power_count += on ? 1 : -1;
-	WARN_ON(mt9p031->power_count < 0);
-
-out:
-	mutex_unlock(&mt9p031->power_lock);
-	return ret;
-}
-
-/* -----------------------------------------------------------------------------
- * V4L2 subdev internal operations
- */
-
-static int mt9p031_registered(struct v4l2_subdev *subdev)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(subdev);
-	struct mt9p031 *mt9p031 = to_mt9p031(subdev);
-	s32 data;
-	int ret;
-
-	ret = mt9p031_power_on(mt9p031);
-	if (ret < 0) {
-		dev_err(&client->dev, "MT9P031 power up failed\n");
-		return ret;
-	}
-
-	/* Read out the chip version register */
-	data = mt9p031_read(client, MT9P031_CHIP_VERSION);
-	if (data != MT9P031_CHIP_VERSION_VALUE) {
-		dev_err(&client->dev, "MT9P031 not detected, wrong version "
-			"0x%04x\n", data);
-		return -ENODEV;
-	}
-
-	mt9p031_power_off(mt9p031);
-
-	dev_info(&client->dev, "MT9P031 detected at address 0x%02x\n",
-		 client->addr);
-
-	return ret;
-}
-
-static int mt9p031_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
-{
-	struct mt9p031 *mt9p031 = to_mt9p031(subdev);
-	struct v4l2_mbus_framefmt *format;
-	struct v4l2_rect *crop;
-
-	crop = v4l2_subdev_get_try_crop(fh, 0);
-	crop->left = MT9P031_COLUMN_START_DEF;
-	crop->top = MT9P031_ROW_START_DEF;
-	crop->width = MT9P031_WINDOW_WIDTH_DEF;
-	crop->height = MT9P031_WINDOW_HEIGHT_DEF;
-
-	format = v4l2_subdev_get_try_format(fh, 0);
-
-	if (mt9p031->model == MT9P031_MODEL_MONOCHROME)
-		format->code = V4L2_MBUS_FMT_Y12_1X12;
-	else
-		format->code = V4L2_MBUS_FMT_SGRBG12_1X12;
-
-	format->width = MT9P031_WINDOW_WIDTH_DEF;
-	format->height = MT9P031_WINDOW_HEIGHT_DEF;
-	format->field = V4L2_FIELD_NONE;
-	format->colorspace = V4L2_COLORSPACE_SRGB;
-
-	return mt9p031_set_power(subdev, 1);
-}
-
-static int mt9p031_close(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
-{
-	return mt9p031_set_power(subdev, 0);
-}
-
-static struct v4l2_subdev_core_ops mt9p031_subdev_core_ops = {
-	.s_power        = mt9p031_set_power,
-};
-
-static struct v4l2_subdev_video_ops mt9p031_subdev_video_ops = {
-	.s_stream       = mt9p031_s_stream,
-};
-
-static struct v4l2_subdev_pad_ops mt9p031_subdev_pad_ops = {
-	.enum_mbus_code = mt9p031_enum_mbus_code,
-	.enum_frame_size = mt9p031_enum_frame_size,
-	.get_fmt = mt9p031_get_format,
-	.set_fmt = mt9p031_set_format,
-	.get_crop = mt9p031_get_crop,
-	.set_crop = mt9p031_set_crop,
-};
-
-static struct v4l2_subdev_ops mt9p031_subdev_ops = {
-	.core   = &mt9p031_subdev_core_ops,
-	.video  = &mt9p031_subdev_video_ops,
-	.pad    = &mt9p031_subdev_pad_ops,
-};
-
-static const struct v4l2_subdev_internal_ops mt9p031_subdev_internal_ops = {
-	.registered = mt9p031_registered,
-	.open = mt9p031_open,
-	.close = mt9p031_close,
-};
-
-/* -----------------------------------------------------------------------------
- * Driver initialization and probing
- */
-
-static int mt9p031_probe(struct i2c_client *client,
-			 const struct i2c_device_id *did)
-{
-	struct mt9p031_platform_data *pdata = client->dev.platform_data;
-	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
-	struct mt9p031 *mt9p031;
-	unsigned int i;
-	int ret;
-
-	if (pdata == NULL) {
-		dev_err(&client->dev, "No platform data\n");
-		return -EINVAL;
-	}
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
-		dev_warn(&client->dev,
-			"I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
-		return -EIO;
-	}
-
-	mt9p031 = kzalloc(sizeof(*mt9p031), GFP_KERNEL);
-	if (mt9p031 == NULL)
-		return -ENOMEM;
-
-	mt9p031->pdata = pdata;
-	mt9p031->output_control	= MT9P031_OUTPUT_CONTROL_DEF;
-	mt9p031->mode2 = MT9P031_READ_MODE_2_ROW_BLC;
-	mt9p031->model = did->driver_data;
-	mt9p031->reset = -1;
-
-	v4l2_ctrl_handler_init(&mt9p031->ctrls, ARRAY_SIZE(mt9p031_ctrls) + 5);
-
-	v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops,
-			  V4L2_CID_EXPOSURE, MT9P031_SHUTTER_WIDTH_MIN,
-			  MT9P031_SHUTTER_WIDTH_MAX, 1,
-			  MT9P031_SHUTTER_WIDTH_DEF);
-	v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops,
-			  V4L2_CID_GAIN, MT9P031_GLOBAL_GAIN_MIN,
-			  MT9P031_GLOBAL_GAIN_MAX, 1, MT9P031_GLOBAL_GAIN_DEF);
-	v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops,
-			  V4L2_CID_HFLIP, 0, 1, 1, 0);
-	v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops,
-			  V4L2_CID_VFLIP, 0, 1, 1, 0);
-	v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops,
-			  V4L2_CID_PIXEL_RATE, pdata->target_freq,
-			  pdata->target_freq, 1, pdata->target_freq);
-
-	for (i = 0; i < ARRAY_SIZE(mt9p031_ctrls); ++i)
-		v4l2_ctrl_new_custom(&mt9p031->ctrls, &mt9p031_ctrls[i], NULL);
-
-	mt9p031->subdev.ctrl_handler = &mt9p031->ctrls;
-
-	if (mt9p031->ctrls.error) {
-		printk(KERN_INFO "%s: control initialization error %d\n",
-		       __func__, mt9p031->ctrls.error);
-		ret = mt9p031->ctrls.error;
-		goto done;
-	}
-
-	mt9p031->blc_auto = v4l2_ctrl_find(&mt9p031->ctrls, V4L2_CID_BLC_AUTO);
-	mt9p031->blc_offset = v4l2_ctrl_find(&mt9p031->ctrls,
-					     V4L2_CID_BLC_DIGITAL_OFFSET);
-
-	mutex_init(&mt9p031->power_lock);
-	v4l2_i2c_subdev_init(&mt9p031->subdev, client, &mt9p031_subdev_ops);
-	mt9p031->subdev.internal_ops = &mt9p031_subdev_internal_ops;
-
-	mt9p031->pad.flags = MEDIA_PAD_FL_SOURCE;
-	ret = media_entity_init(&mt9p031->subdev.entity, 1, &mt9p031->pad, 0);
-	if (ret < 0)
-		goto done;
-
-	mt9p031->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
-
-	mt9p031->crop.width = MT9P031_WINDOW_WIDTH_DEF;
-	mt9p031->crop.height = MT9P031_WINDOW_HEIGHT_DEF;
-	mt9p031->crop.left = MT9P031_COLUMN_START_DEF;
-	mt9p031->crop.top = MT9P031_ROW_START_DEF;
-
-	if (mt9p031->model == MT9P031_MODEL_MONOCHROME)
-		mt9p031->format.code = V4L2_MBUS_FMT_Y12_1X12;
-	else
-		mt9p031->format.code = V4L2_MBUS_FMT_SGRBG12_1X12;
-
-	mt9p031->format.width = MT9P031_WINDOW_WIDTH_DEF;
-	mt9p031->format.height = MT9P031_WINDOW_HEIGHT_DEF;
-	mt9p031->format.field = V4L2_FIELD_NONE;
-	mt9p031->format.colorspace = V4L2_COLORSPACE_SRGB;
-
-	if (pdata->reset != -1) {
-		ret = gpio_request_one(pdata->reset, GPIOF_OUT_INIT_LOW,
-				       "mt9p031_rst");
-		if (ret < 0)
-			goto done;
-
-		mt9p031->reset = pdata->reset;
-	}
-
-	ret = mt9p031_pll_setup(mt9p031);
-
-done:
-	if (ret < 0) {
-		if (mt9p031->reset != -1)
-			gpio_free(mt9p031->reset);
-
-		v4l2_ctrl_handler_free(&mt9p031->ctrls);
-		media_entity_cleanup(&mt9p031->subdev.entity);
-		kfree(mt9p031);
-	}
-
-	return ret;
-}
-
-static int mt9p031_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
-	struct mt9p031 *mt9p031 = to_mt9p031(subdev);
-
-	v4l2_ctrl_handler_free(&mt9p031->ctrls);
-	v4l2_device_unregister_subdev(subdev);
-	media_entity_cleanup(&subdev->entity);
-	if (mt9p031->reset != -1)
-		gpio_free(mt9p031->reset);
-	kfree(mt9p031);
-
-	return 0;
-}
-
-static const struct i2c_device_id mt9p031_id[] = {
-	{ "mt9p031", MT9P031_MODEL_COLOR },
-	{ "mt9p031m", MT9P031_MODEL_MONOCHROME },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, mt9p031_id);
-
-static struct i2c_driver mt9p031_i2c_driver = {
-	.driver = {
-		.name = "mt9p031",
-	},
-	.probe          = mt9p031_probe,
-	.remove         = mt9p031_remove,
-	.id_table       = mt9p031_id,
-};
-
-module_i2c_driver(mt9p031_i2c_driver);
-
-MODULE_DESCRIPTION("Aptina MT9P031 Camera driver");
-MODULE_AUTHOR("Bastian Hecht <hechtb@gmail.com>");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/video/mt9t001.c b/drivers/media/video/mt9t001.c
deleted file mode 100644
index 6d343ad..0000000
--- a/drivers/media/video/mt9t001.c
+++ /dev/null
@@ -1,833 +0,0 @@
-/*
- * Driver for MT9T001 CMOS Image Sensor from Aptina (Micron)
- *
- * Copyright (C) 2010-2011, Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- *
- * Based on the MT9M001 driver,
- *
- * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/i2c.h>
-#include <linux/module.h>
-#include <linux/log2.h>
-#include <linux/slab.h>
-#include <linux/videodev2.h>
-#include <linux/v4l2-mediabus.h>
-
-#include <media/mt9t001.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-subdev.h>
-
-#define MT9T001_PIXEL_ARRAY_HEIGHT			1568
-#define MT9T001_PIXEL_ARRAY_WIDTH			2112
-
-#define MT9T001_CHIP_VERSION				0x00
-#define		MT9T001_CHIP_ID				0x1621
-#define MT9T001_ROW_START				0x01
-#define		MT9T001_ROW_START_MIN			0
-#define		MT9T001_ROW_START_DEF			20
-#define		MT9T001_ROW_START_MAX			1534
-#define MT9T001_COLUMN_START				0x02
-#define		MT9T001_COLUMN_START_MIN		0
-#define		MT9T001_COLUMN_START_DEF		32
-#define		MT9T001_COLUMN_START_MAX		2046
-#define MT9T001_WINDOW_HEIGHT				0x03
-#define		MT9T001_WINDOW_HEIGHT_MIN		1
-#define		MT9T001_WINDOW_HEIGHT_DEF		1535
-#define		MT9T001_WINDOW_HEIGHT_MAX		1567
-#define MT9T001_WINDOW_WIDTH				0x04
-#define		MT9T001_WINDOW_WIDTH_MIN		1
-#define		MT9T001_WINDOW_WIDTH_DEF		2047
-#define		MT9T001_WINDOW_WIDTH_MAX		2111
-#define MT9T001_HORIZONTAL_BLANKING			0x05
-#define		MT9T001_HORIZONTAL_BLANKING_MIN		21
-#define		MT9T001_HORIZONTAL_BLANKING_MAX		1023
-#define MT9T001_VERTICAL_BLANKING			0x06
-#define		MT9T001_VERTICAL_BLANKING_MIN		3
-#define		MT9T001_VERTICAL_BLANKING_MAX		1023
-#define MT9T001_OUTPUT_CONTROL				0x07
-#define		MT9T001_OUTPUT_CONTROL_SYNC		(1 << 0)
-#define		MT9T001_OUTPUT_CONTROL_CHIP_ENABLE	(1 << 1)
-#define		MT9T001_OUTPUT_CONTROL_TEST_DATA	(1 << 6)
-#define MT9T001_SHUTTER_WIDTH_HIGH			0x08
-#define MT9T001_SHUTTER_WIDTH_LOW			0x09
-#define		MT9T001_SHUTTER_WIDTH_MIN		1
-#define		MT9T001_SHUTTER_WIDTH_DEF		1561
-#define		MT9T001_SHUTTER_WIDTH_MAX		(1024 * 1024)
-#define MT9T001_PIXEL_CLOCK				0x0a
-#define		MT9T001_PIXEL_CLOCK_INVERT		(1 << 15)
-#define		MT9T001_PIXEL_CLOCK_SHIFT_MASK		(7 << 8)
-#define		MT9T001_PIXEL_CLOCK_SHIFT_SHIFT		8
-#define		MT9T001_PIXEL_CLOCK_DIVIDE_MASK		(0x7f << 0)
-#define MT9T001_FRAME_RESTART				0x0b
-#define MT9T001_SHUTTER_DELAY				0x0c
-#define		MT9T001_SHUTTER_DELAY_MAX		2047
-#define MT9T001_RESET					0x0d
-#define MT9T001_READ_MODE1				0x1e
-#define		MT9T001_READ_MODE_SNAPSHOT		(1 << 8)
-#define		MT9T001_READ_MODE_STROBE_ENABLE		(1 << 9)
-#define		MT9T001_READ_MODE_STROBE_WIDTH		(1 << 10)
-#define		MT9T001_READ_MODE_STROBE_OVERRIDE	(1 << 11)
-#define MT9T001_READ_MODE2				0x20
-#define		MT9T001_READ_MODE_BAD_FRAMES		(1 << 0)
-#define		MT9T001_READ_MODE_LINE_VALID_CONTINUOUS	(1 << 9)
-#define		MT9T001_READ_MODE_LINE_VALID_FRAME	(1 << 10)
-#define MT9T001_READ_MODE3				0x21
-#define		MT9T001_READ_MODE_GLOBAL_RESET		(1 << 0)
-#define		MT9T001_READ_MODE_GHST_CTL		(1 << 1)
-#define MT9T001_ROW_ADDRESS_MODE			0x22
-#define		MT9T001_ROW_SKIP_MASK			(7 << 0)
-#define		MT9T001_ROW_BIN_MASK			(3 << 3)
-#define		MT9T001_ROW_BIN_SHIFT			3
-#define MT9T001_COLUMN_ADDRESS_MODE			0x23
-#define		MT9T001_COLUMN_SKIP_MASK		(7 << 0)
-#define		MT9T001_COLUMN_BIN_MASK			(3 << 3)
-#define		MT9T001_COLUMN_BIN_SHIFT		3
-#define MT9T001_GREEN1_GAIN				0x2b
-#define MT9T001_BLUE_GAIN				0x2c
-#define MT9T001_RED_GAIN				0x2d
-#define MT9T001_GREEN2_GAIN				0x2e
-#define MT9T001_TEST_DATA				0x32
-#define MT9T001_GLOBAL_GAIN				0x35
-#define		MT9T001_GLOBAL_GAIN_MIN			8
-#define		MT9T001_GLOBAL_GAIN_MAX			1024
-#define MT9T001_BLACK_LEVEL				0x49
-#define MT9T001_ROW_BLACK_DEFAULT_OFFSET		0x4b
-#define MT9T001_BLC_DELTA_THRESHOLDS			0x5d
-#define MT9T001_CAL_THRESHOLDS				0x5f
-#define MT9T001_GREEN1_OFFSET				0x60
-#define MT9T001_GREEN2_OFFSET				0x61
-#define MT9T001_BLACK_LEVEL_CALIBRATION			0x62
-#define		MT9T001_BLACK_LEVEL_OVERRIDE		(1 << 0)
-#define		MT9T001_BLACK_LEVEL_DISABLE_OFFSET	(1 << 1)
-#define		MT9T001_BLACK_LEVEL_RECALCULATE		(1 << 12)
-#define		MT9T001_BLACK_LEVEL_LOCK_RED_BLUE	(1 << 13)
-#define		MT9T001_BLACK_LEVEL_LOCK_GREEN		(1 << 14)
-#define MT9T001_RED_OFFSET				0x63
-#define MT9T001_BLUE_OFFSET				0x64
-
-struct mt9t001 {
-	struct v4l2_subdev subdev;
-	struct media_pad pad;
-
-	struct v4l2_mbus_framefmt format;
-	struct v4l2_rect crop;
-
-	struct v4l2_ctrl_handler ctrls;
-	struct v4l2_ctrl *gains[4];
-
-	u16 output_control;
-	u16 black_level;
-};
-
-static inline struct mt9t001 *to_mt9t001(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct mt9t001, subdev);
-}
-
-static int mt9t001_read(struct i2c_client *client, u8 reg)
-{
-	return i2c_smbus_read_word_swapped(client, reg);
-}
-
-static int mt9t001_write(struct i2c_client *client, u8 reg, u16 data)
-{
-	return i2c_smbus_write_word_swapped(client, reg, data);
-}
-
-static int mt9t001_set_output_control(struct mt9t001 *mt9t001, u16 clear,
-				      u16 set)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&mt9t001->subdev);
-	u16 value = (mt9t001->output_control & ~clear) | set;
-	int ret;
-
-	if (value == mt9t001->output_control)
-		return 0;
-
-	ret = mt9t001_write(client, MT9T001_OUTPUT_CONTROL, value);
-	if (ret < 0)
-		return ret;
-
-	mt9t001->output_control = value;
-	return 0;
-}
-
-/* -----------------------------------------------------------------------------
- * V4L2 subdev video operations
- */
-
-static struct v4l2_mbus_framefmt *
-__mt9t001_get_pad_format(struct mt9t001 *mt9t001, struct v4l2_subdev_fh *fh,
-			 unsigned int pad, enum v4l2_subdev_format_whence which)
-{
-	switch (which) {
-	case V4L2_SUBDEV_FORMAT_TRY:
-		return v4l2_subdev_get_try_format(fh, pad);
-	case V4L2_SUBDEV_FORMAT_ACTIVE:
-		return &mt9t001->format;
-	default:
-		return NULL;
-	}
-}
-
-static struct v4l2_rect *
-__mt9t001_get_pad_crop(struct mt9t001 *mt9t001, struct v4l2_subdev_fh *fh,
-		       unsigned int pad, enum v4l2_subdev_format_whence which)
-{
-	switch (which) {
-	case V4L2_SUBDEV_FORMAT_TRY:
-		return v4l2_subdev_get_try_crop(fh, pad);
-	case V4L2_SUBDEV_FORMAT_ACTIVE:
-		return &mt9t001->crop;
-	default:
-		return NULL;
-	}
-}
-
-static int mt9t001_s_stream(struct v4l2_subdev *subdev, int enable)
-{
-	const u16 mode = MT9T001_OUTPUT_CONTROL_CHIP_ENABLE;
-	struct i2c_client *client = v4l2_get_subdevdata(subdev);
-	struct mt9t001 *mt9t001 = to_mt9t001(subdev);
-	struct v4l2_mbus_framefmt *format = &mt9t001->format;
-	struct v4l2_rect *crop = &mt9t001->crop;
-	unsigned int hratio;
-	unsigned int vratio;
-	int ret;
-
-	if (!enable)
-		return mt9t001_set_output_control(mt9t001, mode, 0);
-
-	/* Configure the window size and row/column bin */
-	hratio = DIV_ROUND_CLOSEST(crop->width, format->width);
-	vratio = DIV_ROUND_CLOSEST(crop->height, format->height);
-
-	ret = mt9t001_write(client, MT9T001_ROW_ADDRESS_MODE, hratio - 1);
-	if (ret < 0)
-		return ret;
-
-	ret = mt9t001_write(client, MT9T001_COLUMN_ADDRESS_MODE, vratio - 1);
-	if (ret < 0)
-		return ret;
-
-	ret = mt9t001_write(client, MT9T001_COLUMN_START, crop->left);
-	if (ret < 0)
-		return ret;
-
-	ret = mt9t001_write(client, MT9T001_ROW_START, crop->top);
-	if (ret < 0)
-		return ret;
-
-	ret = mt9t001_write(client, MT9T001_WINDOW_WIDTH, crop->width - 1);
-	if (ret < 0)
-		return ret;
-
-	ret = mt9t001_write(client, MT9T001_WINDOW_HEIGHT, crop->height - 1);
-	if (ret < 0)
-		return ret;
-
-	/* Switch to master "normal" mode */
-	return mt9t001_set_output_control(mt9t001, 0, mode);
-}
-
-static int mt9t001_enum_mbus_code(struct v4l2_subdev *subdev,
-				  struct v4l2_subdev_fh *fh,
-				  struct v4l2_subdev_mbus_code_enum *code)
-{
-	if (code->index > 0)
-		return -EINVAL;
-
-	code->code = V4L2_MBUS_FMT_SGRBG10_1X10;
-	return 0;
-}
-
-static int mt9t001_enum_frame_size(struct v4l2_subdev *subdev,
-				   struct v4l2_subdev_fh *fh,
-				   struct v4l2_subdev_frame_size_enum *fse)
-{
-	if (fse->index >= 8 || fse->code != V4L2_MBUS_FMT_SGRBG10_1X10)
-		return -EINVAL;
-
-	fse->min_width = (MT9T001_WINDOW_WIDTH_DEF + 1) / fse->index;
-	fse->max_width = fse->min_width;
-	fse->min_height = (MT9T001_WINDOW_HEIGHT_DEF + 1) / fse->index;
-	fse->max_height = fse->min_height;
-
-	return 0;
-}
-
-static int mt9t001_get_format(struct v4l2_subdev *subdev,
-			      struct v4l2_subdev_fh *fh,
-			      struct v4l2_subdev_format *format)
-{
-	struct mt9t001 *mt9t001 = to_mt9t001(subdev);
-
-	format->format = *__mt9t001_get_pad_format(mt9t001, fh, format->pad,
-						   format->which);
-	return 0;
-}
-
-static int mt9t001_set_format(struct v4l2_subdev *subdev,
-			      struct v4l2_subdev_fh *fh,
-			      struct v4l2_subdev_format *format)
-{
-	struct mt9t001 *mt9t001 = to_mt9t001(subdev);
-	struct v4l2_mbus_framefmt *__format;
-	struct v4l2_rect *__crop;
-	unsigned int width;
-	unsigned int height;
-	unsigned int hratio;
-	unsigned int vratio;
-
-	__crop = __mt9t001_get_pad_crop(mt9t001, fh, format->pad,
-					format->which);
-
-	/* Clamp the width and height to avoid dividing by zero. */
-	width = clamp_t(unsigned int, ALIGN(format->format.width, 2),
-			max(__crop->width / 8, MT9T001_WINDOW_HEIGHT_MIN + 1),
-			__crop->width);
-	height = clamp_t(unsigned int, ALIGN(format->format.height, 2),
-			 max(__crop->height / 8, MT9T001_WINDOW_HEIGHT_MIN + 1),
-			 __crop->height);
-
-	hratio = DIV_ROUND_CLOSEST(__crop->width, width);
-	vratio = DIV_ROUND_CLOSEST(__crop->height, height);
-
-	__format = __mt9t001_get_pad_format(mt9t001, fh, format->pad,
-					    format->which);
-	__format->width = __crop->width / hratio;
-	__format->height = __crop->height / vratio;
-
-	format->format = *__format;
-
-	return 0;
-}
-
-static int mt9t001_get_crop(struct v4l2_subdev *subdev,
-			    struct v4l2_subdev_fh *fh,
-			    struct v4l2_subdev_crop *crop)
-{
-	struct mt9t001 *mt9t001 = to_mt9t001(subdev);
-
-	crop->rect = *__mt9t001_get_pad_crop(mt9t001, fh, crop->pad,
-					     crop->which);
-	return 0;
-}
-
-static int mt9t001_set_crop(struct v4l2_subdev *subdev,
-			    struct v4l2_subdev_fh *fh,
-			    struct v4l2_subdev_crop *crop)
-{
-	struct mt9t001 *mt9t001 = to_mt9t001(subdev);
-	struct v4l2_mbus_framefmt *__format;
-	struct v4l2_rect *__crop;
-	struct v4l2_rect rect;
-
-	/* Clamp the crop rectangle boundaries and align them to a multiple of 2
-	 * pixels.
-	 */
-	rect.left = clamp(ALIGN(crop->rect.left, 2),
-			  MT9T001_COLUMN_START_MIN,
-			  MT9T001_COLUMN_START_MAX);
-	rect.top = clamp(ALIGN(crop->rect.top, 2),
-			 MT9T001_ROW_START_MIN,
-			 MT9T001_ROW_START_MAX);
-	rect.width = clamp(ALIGN(crop->rect.width, 2),
-			   MT9T001_WINDOW_WIDTH_MIN + 1,
-			   MT9T001_WINDOW_WIDTH_MAX + 1);
-	rect.height = clamp(ALIGN(crop->rect.height, 2),
-			    MT9T001_WINDOW_HEIGHT_MIN + 1,
-			    MT9T001_WINDOW_HEIGHT_MAX + 1);
-
-	rect.width = min(rect.width, MT9T001_PIXEL_ARRAY_WIDTH - rect.left);
-	rect.height = min(rect.height, MT9T001_PIXEL_ARRAY_HEIGHT - rect.top);
-
-	__crop = __mt9t001_get_pad_crop(mt9t001, fh, crop->pad, crop->which);
-
-	if (rect.width != __crop->width || rect.height != __crop->height) {
-		/* Reset the output image size if the crop rectangle size has
-		 * been modified.
-		 */
-		__format = __mt9t001_get_pad_format(mt9t001, fh, crop->pad,
-						    crop->which);
-		__format->width = rect.width;
-		__format->height = rect.height;
-	}
-
-	*__crop = rect;
-	crop->rect = rect;
-
-	return 0;
-}
-
-/* -----------------------------------------------------------------------------
- * V4L2 subdev control operations
- */
-
-#define V4L2_CID_TEST_PATTERN		(V4L2_CID_USER_BASE | 0x1001)
-#define V4L2_CID_BLACK_LEVEL_AUTO	(V4L2_CID_USER_BASE | 0x1002)
-#define V4L2_CID_BLACK_LEVEL_OFFSET	(V4L2_CID_USER_BASE | 0x1003)
-#define V4L2_CID_BLACK_LEVEL_CALIBRATE	(V4L2_CID_USER_BASE | 0x1004)
-
-#define V4L2_CID_GAIN_RED		(V4L2_CTRL_CLASS_CAMERA | 0x1001)
-#define V4L2_CID_GAIN_GREEN_RED		(V4L2_CTRL_CLASS_CAMERA | 0x1002)
-#define V4L2_CID_GAIN_GREEN_BLUE	(V4L2_CTRL_CLASS_CAMERA | 0x1003)
-#define V4L2_CID_GAIN_BLUE		(V4L2_CTRL_CLASS_CAMERA | 0x1004)
-
-static u16 mt9t001_gain_value(s32 *gain)
-{
-	/* Gain is controlled by 2 analog stages and a digital stage. Valid
-	 * values for the 3 stages are
-	 *
-	 * Stage		Min	Max	Step
-	 * ------------------------------------------
-	 * First analog stage	x1	x2	1
-	 * Second analog stage	x1	x4	0.125
-	 * Digital stage	x1	x16	0.125
-	 *
-	 * To minimize noise, the gain stages should be used in the second
-	 * analog stage, first analog stage, digital stage order. Gain from a
-	 * previous stage should be pushed to its maximum value before the next
-	 * stage is used.
-	 */
-	if (*gain <= 32)
-		return *gain;
-
-	if (*gain <= 64) {
-		*gain &= ~1;
-		return (1 << 6) | (*gain >> 1);
-	}
-
-	*gain &= ~7;
-	return ((*gain - 64) << 5) | (1 << 6) | 32;
-}
-
-static int mt9t001_ctrl_freeze(struct mt9t001 *mt9t001, bool freeze)
-{
-	return mt9t001_set_output_control(mt9t001,
-		freeze ? 0 : MT9T001_OUTPUT_CONTROL_SYNC,
-		freeze ? MT9T001_OUTPUT_CONTROL_SYNC : 0);
-}
-
-static int mt9t001_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	static const u8 gains[4] = {
-		MT9T001_RED_GAIN, MT9T001_GREEN1_GAIN,
-		MT9T001_GREEN2_GAIN, MT9T001_BLUE_GAIN
-	};
-
-	struct mt9t001 *mt9t001 =
-			container_of(ctrl->handler, struct mt9t001, ctrls);
-	struct i2c_client *client = v4l2_get_subdevdata(&mt9t001->subdev);
-	unsigned int count;
-	unsigned int i;
-	u16 value;
-	int ret;
-
-	switch (ctrl->id) {
-	case V4L2_CID_GAIN_RED:
-	case V4L2_CID_GAIN_GREEN_RED:
-	case V4L2_CID_GAIN_GREEN_BLUE:
-	case V4L2_CID_GAIN_BLUE:
-
-		/* Disable control updates if more than one control has changed
-		 * in the cluster.
-		 */
-		for (i = 0, count = 0; i < 4; ++i) {
-			struct v4l2_ctrl *gain = mt9t001->gains[i];
-
-			if (gain->val != gain->cur.val)
-				count++;
-		}
-
-		if (count > 1) {
-			ret = mt9t001_ctrl_freeze(mt9t001, true);
-			if (ret < 0)
-				return ret;
-		}
-
-		/* Update the gain controls. */
-		for (i = 0; i < 4; ++i) {
-			struct v4l2_ctrl *gain = mt9t001->gains[i];
-
-			if (gain->val == gain->cur.val)
-				continue;
-
-			value = mt9t001_gain_value(&gain->val);
-			ret = mt9t001_write(client, gains[i], value);
-			if (ret < 0) {
-				mt9t001_ctrl_freeze(mt9t001, false);
-				return ret;
-			}
-		}
-
-		/* Enable control updates. */
-		if (count > 1) {
-			ret = mt9t001_ctrl_freeze(mt9t001, false);
-			if (ret < 0)
-				return ret;
-		}
-
-		break;
-
-	case V4L2_CID_EXPOSURE:
-		ret = mt9t001_write(client, MT9T001_SHUTTER_WIDTH_LOW,
-				    ctrl->val & 0xffff);
-		if (ret < 0)
-			return ret;
-
-		return mt9t001_write(client, MT9T001_SHUTTER_WIDTH_HIGH,
-				     ctrl->val >> 16);
-
-	case V4L2_CID_TEST_PATTERN:
-		ret = mt9t001_set_output_control(mt9t001,
-			ctrl->val ? 0 : MT9T001_OUTPUT_CONTROL_TEST_DATA,
-			ctrl->val ? MT9T001_OUTPUT_CONTROL_TEST_DATA : 0);
-		if (ret < 0)
-			return ret;
-
-		return mt9t001_write(client, MT9T001_TEST_DATA, ctrl->val << 2);
-
-	case V4L2_CID_BLACK_LEVEL_AUTO:
-		value = ctrl->val ? 0 : MT9T001_BLACK_LEVEL_OVERRIDE;
-		ret = mt9t001_write(client, MT9T001_BLACK_LEVEL_CALIBRATION,
-				    value);
-		if (ret < 0)
-			return ret;
-
-		mt9t001->black_level = value;
-		break;
-
-	case V4L2_CID_BLACK_LEVEL_OFFSET:
-		ret = mt9t001_write(client, MT9T001_GREEN1_OFFSET, ctrl->val);
-		if (ret < 0)
-			return ret;
-
-		ret = mt9t001_write(client, MT9T001_GREEN2_OFFSET, ctrl->val);
-		if (ret < 0)
-			return ret;
-
-		ret = mt9t001_write(client, MT9T001_RED_OFFSET, ctrl->val);
-		if (ret < 0)
-			return ret;
-
-		return mt9t001_write(client, MT9T001_BLUE_OFFSET, ctrl->val);
-
-	case V4L2_CID_BLACK_LEVEL_CALIBRATE:
-		return mt9t001_write(client, MT9T001_BLACK_LEVEL_CALIBRATION,
-				     MT9T001_BLACK_LEVEL_RECALCULATE |
-				     mt9t001->black_level);
-	}
-
-	return 0;
-}
-
-static struct v4l2_ctrl_ops mt9t001_ctrl_ops = {
-	.s_ctrl = mt9t001_s_ctrl,
-};
-
-static const struct v4l2_ctrl_config mt9t001_ctrls[] = {
-	{
-		.ops		= &mt9t001_ctrl_ops,
-		.id		= V4L2_CID_TEST_PATTERN,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Test pattern",
-		.min		= 0,
-		.max		= 1023,
-		.step		= 1,
-		.def		= 0,
-		.flags		= 0,
-	}, {
-		.ops		= &mt9t001_ctrl_ops,
-		.id		= V4L2_CID_BLACK_LEVEL_AUTO,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Black Level, Auto",
-		.min		= 0,
-		.max		= 1,
-		.step		= 1,
-		.def		= 1,
-		.flags		= 0,
-	}, {
-		.ops		= &mt9t001_ctrl_ops,
-		.id		= V4L2_CID_BLACK_LEVEL_OFFSET,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Black Level, Offset",
-		.min		= -256,
-		.max		= 255,
-		.step		= 1,
-		.def		= 32,
-		.flags		= 0,
-	}, {
-		.ops		= &mt9t001_ctrl_ops,
-		.id		= V4L2_CID_BLACK_LEVEL_CALIBRATE,
-		.type		= V4L2_CTRL_TYPE_BUTTON,
-		.name		= "Black Level, Calibrate",
-		.min		= 0,
-		.max		= 0,
-		.step		= 0,
-		.def		= 0,
-		.flags		= V4L2_CTRL_FLAG_WRITE_ONLY,
-	},
-};
-
-static const struct v4l2_ctrl_config mt9t001_gains[] = {
-	{
-		.ops		= &mt9t001_ctrl_ops,
-		.id		= V4L2_CID_GAIN_RED,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Gain, Red",
-		.min		= MT9T001_GLOBAL_GAIN_MIN,
-		.max		= MT9T001_GLOBAL_GAIN_MAX,
-		.step		= 1,
-		.def		= MT9T001_GLOBAL_GAIN_MIN,
-		.flags		= 0,
-	}, {
-		.ops		= &mt9t001_ctrl_ops,
-		.id		= V4L2_CID_GAIN_GREEN_RED,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Gain, Green (R)",
-		.min		= MT9T001_GLOBAL_GAIN_MIN,
-		.max		= MT9T001_GLOBAL_GAIN_MAX,
-		.step		= 1,
-		.def		= MT9T001_GLOBAL_GAIN_MIN,
-		.flags		= 0,
-	}, {
-		.ops		= &mt9t001_ctrl_ops,
-		.id		= V4L2_CID_GAIN_GREEN_BLUE,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Gain, Green (B)",
-		.min		= MT9T001_GLOBAL_GAIN_MIN,
-		.max		= MT9T001_GLOBAL_GAIN_MAX,
-		.step		= 1,
-		.def		= MT9T001_GLOBAL_GAIN_MIN,
-		.flags		= 0,
-	}, {
-		.ops		= &mt9t001_ctrl_ops,
-		.id		= V4L2_CID_GAIN_BLUE,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Gain, Blue",
-		.min		= MT9T001_GLOBAL_GAIN_MIN,
-		.max		= MT9T001_GLOBAL_GAIN_MAX,
-		.step		= 1,
-		.def		= MT9T001_GLOBAL_GAIN_MIN,
-		.flags		= 0,
-	},
-};
-
-/* -----------------------------------------------------------------------------
- * V4L2 subdev internal operations
- */
-
-static int mt9t001_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
-{
-	struct v4l2_mbus_framefmt *format;
-	struct v4l2_rect *crop;
-
-	crop = v4l2_subdev_get_try_crop(fh, 0);
-	crop->left = MT9T001_COLUMN_START_DEF;
-	crop->top = MT9T001_ROW_START_DEF;
-	crop->width = MT9T001_WINDOW_WIDTH_DEF + 1;
-	crop->height = MT9T001_WINDOW_HEIGHT_DEF + 1;
-
-	format = v4l2_subdev_get_try_format(fh, 0);
-	format->code = V4L2_MBUS_FMT_SGRBG10_1X10;
-	format->width = MT9T001_WINDOW_WIDTH_DEF + 1;
-	format->height = MT9T001_WINDOW_HEIGHT_DEF + 1;
-	format->field = V4L2_FIELD_NONE;
-	format->colorspace = V4L2_COLORSPACE_SRGB;
-
-	return 0;
-}
-
-static struct v4l2_subdev_video_ops mt9t001_subdev_video_ops = {
-	.s_stream = mt9t001_s_stream,
-};
-
-static struct v4l2_subdev_pad_ops mt9t001_subdev_pad_ops = {
-	.enum_mbus_code = mt9t001_enum_mbus_code,
-	.enum_frame_size = mt9t001_enum_frame_size,
-	.get_fmt = mt9t001_get_format,
-	.set_fmt = mt9t001_set_format,
-	.get_crop = mt9t001_get_crop,
-	.set_crop = mt9t001_set_crop,
-};
-
-static struct v4l2_subdev_ops mt9t001_subdev_ops = {
-	.video = &mt9t001_subdev_video_ops,
-	.pad = &mt9t001_subdev_pad_ops,
-};
-
-static struct v4l2_subdev_internal_ops mt9t001_subdev_internal_ops = {
-	.open = mt9t001_open,
-};
-
-static int mt9t001_video_probe(struct i2c_client *client)
-{
-	struct mt9t001_platform_data *pdata = client->dev.platform_data;
-	s32 data;
-	int ret;
-
-	dev_info(&client->dev, "Probing MT9T001 at address 0x%02x\n",
-		 client->addr);
-
-	/* Reset the chip and stop data read out */
-	ret = mt9t001_write(client, MT9T001_RESET, 1);
-	if (ret < 0)
-		return ret;
-
-	ret = mt9t001_write(client, MT9T001_RESET, 0);
-	if (ret < 0)
-		return ret;
-
-	ret  = mt9t001_write(client, MT9T001_OUTPUT_CONTROL, 0);
-	if (ret < 0)
-		return ret;
-
-	/* Configure the pixel clock polarity */
-	if (pdata->clk_pol) {
-		ret  = mt9t001_write(client, MT9T001_PIXEL_CLOCK,
-				     MT9T001_PIXEL_CLOCK_INVERT);
-		if (ret < 0)
-			return ret;
-	}
-
-	/* Read and check the sensor version */
-	data = mt9t001_read(client, MT9T001_CHIP_VERSION);
-	if (data != MT9T001_CHIP_ID) {
-		dev_err(&client->dev, "MT9T001 not detected, wrong version "
-			"0x%04x\n", data);
-		return -ENODEV;
-	}
-
-	dev_info(&client->dev, "MT9T001 detected at address 0x%02x\n",
-		 client->addr);
-
-	return ret;
-}
-
-static int mt9t001_probe(struct i2c_client *client,
-			 const struct i2c_device_id *did)
-{
-	struct mt9t001_platform_data *pdata = client->dev.platform_data;
-	struct mt9t001 *mt9t001;
-	unsigned int i;
-	int ret;
-
-	if (pdata == NULL) {
-		dev_err(&client->dev, "No platform data\n");
-		return -EINVAL;
-	}
-
-	if (!i2c_check_functionality(client->adapter,
-				     I2C_FUNC_SMBUS_WORD_DATA)) {
-		dev_warn(&client->adapter->dev,
-			 "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
-		return -EIO;
-	}
-
-	ret = mt9t001_video_probe(client);
-	if (ret < 0)
-		return ret;
-
-	mt9t001 = kzalloc(sizeof(*mt9t001), GFP_KERNEL);
-	if (!mt9t001)
-		return -ENOMEM;
-
-	v4l2_ctrl_handler_init(&mt9t001->ctrls, ARRAY_SIZE(mt9t001_ctrls) +
-						ARRAY_SIZE(mt9t001_gains) + 3);
-
-	v4l2_ctrl_new_std(&mt9t001->ctrls, &mt9t001_ctrl_ops,
-			  V4L2_CID_EXPOSURE, MT9T001_SHUTTER_WIDTH_MIN,
-			  MT9T001_SHUTTER_WIDTH_MAX, 1,
-			  MT9T001_SHUTTER_WIDTH_DEF);
-	v4l2_ctrl_new_std(&mt9t001->ctrls, &mt9t001_ctrl_ops,
-			  V4L2_CID_BLACK_LEVEL, 1, 1, 1, 1);
-	v4l2_ctrl_new_std(&mt9t001->ctrls, &mt9t001_ctrl_ops,
-			  V4L2_CID_PIXEL_RATE, pdata->ext_clk, pdata->ext_clk,
-			  1, pdata->ext_clk);
-
-	for (i = 0; i < ARRAY_SIZE(mt9t001_ctrls); ++i)
-		v4l2_ctrl_new_custom(&mt9t001->ctrls, &mt9t001_ctrls[i], NULL);
-
-	for (i = 0; i < ARRAY_SIZE(mt9t001_gains); ++i)
-		mt9t001->gains[i] = v4l2_ctrl_new_custom(&mt9t001->ctrls,
-			&mt9t001_gains[i], NULL);
-
-	v4l2_ctrl_cluster(ARRAY_SIZE(mt9t001_gains), mt9t001->gains);
-
-	mt9t001->subdev.ctrl_handler = &mt9t001->ctrls;
-
-	if (mt9t001->ctrls.error) {
-		printk(KERN_INFO "%s: control initialization error %d\n",
-		       __func__, mt9t001->ctrls.error);
-		ret = -EINVAL;
-		goto done;
-	}
-
-	mt9t001->crop.left = MT9T001_COLUMN_START_DEF;
-	mt9t001->crop.top = MT9T001_ROW_START_DEF;
-	mt9t001->crop.width = MT9T001_WINDOW_WIDTH_DEF + 1;
-	mt9t001->crop.height = MT9T001_WINDOW_HEIGHT_DEF + 1;
-
-	mt9t001->format.code = V4L2_MBUS_FMT_SGRBG10_1X10;
-	mt9t001->format.width = MT9T001_WINDOW_WIDTH_DEF + 1;
-	mt9t001->format.height = MT9T001_WINDOW_HEIGHT_DEF + 1;
-	mt9t001->format.field = V4L2_FIELD_NONE;
-	mt9t001->format.colorspace = V4L2_COLORSPACE_SRGB;
-
-	v4l2_i2c_subdev_init(&mt9t001->subdev, client, &mt9t001_subdev_ops);
-	mt9t001->subdev.internal_ops = &mt9t001_subdev_internal_ops;
-	mt9t001->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
-
-	mt9t001->pad.flags = MEDIA_PAD_FL_SOURCE;
-	ret = media_entity_init(&mt9t001->subdev.entity, 1, &mt9t001->pad, 0);
-
-done:
-	if (ret < 0) {
-		v4l2_ctrl_handler_free(&mt9t001->ctrls);
-		media_entity_cleanup(&mt9t001->subdev.entity);
-		kfree(mt9t001);
-	}
-
-	return ret;
-}
-
-static int mt9t001_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
-	struct mt9t001 *mt9t001 = to_mt9t001(subdev);
-
-	v4l2_ctrl_handler_free(&mt9t001->ctrls);
-	v4l2_device_unregister_subdev(subdev);
-	media_entity_cleanup(&subdev->entity);
-	kfree(mt9t001);
-	return 0;
-}
-
-static const struct i2c_device_id mt9t001_id[] = {
-	{ "mt9t001", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, mt9t001_id);
-
-static struct i2c_driver mt9t001_driver = {
-	.driver = {
-		.name = "mt9t001",
-	},
-	.probe		= mt9t001_probe,
-	.remove		= mt9t001_remove,
-	.id_table	= mt9t001_id,
-};
-
-module_i2c_driver(mt9t001_driver);
-
-MODULE_DESCRIPTION("Aptina (Micron) MT9T001 Camera driver");
-MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c
deleted file mode 100644
index 6bf01ad..0000000
--- a/drivers/media/video/mt9v011.c
+++ /dev/null
@@ -1,712 +0,0 @@
-/*
- * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor
- *
- * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com)
- * This code is placed under the terms of the GNU General Public License v2
- */
-
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/videodev2.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <asm/div64.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/mt9v011.h>
-
-MODULE_DESCRIPTION("Micron mt9v011 sensor driver");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
-MODULE_LICENSE("GPL");
-
-static int debug;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level (0-2)");
-
-#define R00_MT9V011_CHIP_VERSION	0x00
-#define R01_MT9V011_ROWSTART		0x01
-#define R02_MT9V011_COLSTART		0x02
-#define R03_MT9V011_HEIGHT		0x03
-#define R04_MT9V011_WIDTH		0x04
-#define R05_MT9V011_HBLANK		0x05
-#define R06_MT9V011_VBLANK		0x06
-#define R07_MT9V011_OUT_CTRL		0x07
-#define R09_MT9V011_SHUTTER_WIDTH	0x09
-#define R0A_MT9V011_CLK_SPEED		0x0a
-#define R0B_MT9V011_RESTART		0x0b
-#define R0C_MT9V011_SHUTTER_DELAY	0x0c
-#define R0D_MT9V011_RESET		0x0d
-#define R1E_MT9V011_DIGITAL_ZOOM	0x1e
-#define R20_MT9V011_READ_MODE		0x20
-#define R2B_MT9V011_GREEN_1_GAIN	0x2b
-#define R2C_MT9V011_BLUE_GAIN		0x2c
-#define R2D_MT9V011_RED_GAIN		0x2d
-#define R2E_MT9V011_GREEN_2_GAIN	0x2e
-#define R35_MT9V011_GLOBAL_GAIN		0x35
-#define RF1_MT9V011_CHIP_ENABLE		0xf1
-
-#define MT9V011_VERSION			0x8232
-#define MT9V011_REV_B_VERSION		0x8243
-
-/* supported controls */
-static struct v4l2_queryctrl mt9v011_qctrl[] = {
-	{
-		.id = V4L2_CID_GAIN,
-		.type = V4L2_CTRL_TYPE_INTEGER,
-		.name = "Gain",
-		.minimum = 0,
-		.maximum = (1 << 12) - 1 - 0x0020,
-		.step = 1,
-		.default_value = 0x0020,
-		.flags = 0,
-	}, {
-		.id = V4L2_CID_EXPOSURE,
-		.type = V4L2_CTRL_TYPE_INTEGER,
-		.name = "Exposure",
-		.minimum = 0,
-		.maximum = 2047,
-		.step = 1,
-		.default_value = 0x01fc,
-		.flags = 0,
-	}, {
-		.id = V4L2_CID_RED_BALANCE,
-		.type = V4L2_CTRL_TYPE_INTEGER,
-		.name = "Red Balance",
-		.minimum = -1 << 9,
-		.maximum = (1 << 9) - 1,
-		.step = 1,
-		.default_value = 0,
-		.flags = 0,
-	}, {
-		.id = V4L2_CID_BLUE_BALANCE,
-		.type = V4L2_CTRL_TYPE_INTEGER,
-		.name = "Blue Balance",
-		.minimum = -1 << 9,
-		.maximum = (1 << 9) - 1,
-		.step = 1,
-		.default_value = 0,
-		.flags = 0,
-	}, {
-		.id      = V4L2_CID_HFLIP,
-		.type    = V4L2_CTRL_TYPE_BOOLEAN,
-		.name    = "Mirror",
-		.minimum = 0,
-		.maximum = 1,
-		.step    = 1,
-		.default_value = 0,
-		.flags = 0,
-	}, {
-		.id      = V4L2_CID_VFLIP,
-		.type    = V4L2_CTRL_TYPE_BOOLEAN,
-		.name    = "Vflip",
-		.minimum = 0,
-		.maximum = 1,
-		.step    = 1,
-		.default_value = 0,
-		.flags = 0,
-	}, {
-	}
-};
-
-struct mt9v011 {
-	struct v4l2_subdev sd;
-	unsigned width, height;
-	unsigned xtal;
-	unsigned hflip:1;
-	unsigned vflip:1;
-
-	u16 global_gain, exposure;
-	s16 red_bal, blue_bal;
-};
-
-static inline struct mt9v011 *to_mt9v011(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct mt9v011, sd);
-}
-
-static int mt9v011_read(struct v4l2_subdev *sd, unsigned char addr)
-{
-	struct i2c_client *c = v4l2_get_subdevdata(sd);
-	__be16 buffer;
-	int rc, val;
-
-	rc = i2c_master_send(c, &addr, 1);
-	if (rc != 1)
-		v4l2_dbg(0, debug, sd,
-			 "i2c i/o error: rc == %d (should be 1)\n", rc);
-
-	msleep(10);
-
-	rc = i2c_master_recv(c, (char *)&buffer, 2);
-	if (rc != 2)
-		v4l2_dbg(0, debug, sd,
-			 "i2c i/o error: rc == %d (should be 2)\n", rc);
-
-	val = be16_to_cpu(buffer);
-
-	v4l2_dbg(2, debug, sd, "mt9v011: read 0x%02x = 0x%04x\n", addr, val);
-
-	return val;
-}
-
-static void mt9v011_write(struct v4l2_subdev *sd, unsigned char addr,
-				 u16 value)
-{
-	struct i2c_client *c = v4l2_get_subdevdata(sd);
-	unsigned char buffer[3];
-	int rc;
-
-	buffer[0] = addr;
-	buffer[1] = value >> 8;
-	buffer[2] = value & 0xff;
-
-	v4l2_dbg(2, debug, sd,
-		 "mt9v011: writing 0x%02x 0x%04x\n", buffer[0], value);
-	rc = i2c_master_send(c, buffer, 3);
-	if (rc != 3)
-		v4l2_dbg(0, debug, sd,
-			 "i2c i/o error: rc == %d (should be 3)\n", rc);
-}
-
-
-struct i2c_reg_value {
-	unsigned char reg;
-	u16           value;
-};
-
-/*
- * Values used at the original driver
- * Some values are marked as Reserved at the datasheet
- */
-static const struct i2c_reg_value mt9v011_init_default[] = {
-		{ R0D_MT9V011_RESET, 0x0001 },
-		{ R0D_MT9V011_RESET, 0x0000 },
-
-		{ R0C_MT9V011_SHUTTER_DELAY, 0x0000 },
-		{ R09_MT9V011_SHUTTER_WIDTH, 0x1fc },
-
-		{ R0A_MT9V011_CLK_SPEED, 0x0000 },
-		{ R1E_MT9V011_DIGITAL_ZOOM,  0x0000 },
-
-		{ R07_MT9V011_OUT_CTRL, 0x0002 },	/* chip enable */
-};
-
-
-static u16 calc_mt9v011_gain(s16 lineargain)
-{
-
-	u16 digitalgain = 0;
-	u16 analogmult = 0;
-	u16 analoginit = 0;
-
-	if (lineargain < 0)
-		lineargain = 0;
-
-	/* recommended minimum */
-	lineargain += 0x0020;
-
-	if (lineargain > 2047)
-		lineargain = 2047;
-
-	if (lineargain > 1023) {
-		digitalgain = 3;
-		analogmult = 3;
-		analoginit = lineargain / 16;
-	} else if (lineargain > 511) {
-		digitalgain = 1;
-		analogmult = 3;
-		analoginit = lineargain / 8;
-	} else if (lineargain > 255) {
-		analogmult = 3;
-		analoginit = lineargain / 4;
-	} else if (lineargain > 127) {
-		analogmult = 1;
-		analoginit = lineargain / 2;
-	} else
-		analoginit = lineargain;
-
-	return analoginit + (analogmult << 7) + (digitalgain << 9);
-
-}
-
-static void set_balance(struct v4l2_subdev *sd)
-{
-	struct mt9v011 *core = to_mt9v011(sd);
-	u16 green_gain, blue_gain, red_gain;
-	u16 exposure;
-	s16 bal;
-
-	exposure = core->exposure;
-
-	green_gain = calc_mt9v011_gain(core->global_gain);
-
-	bal = core->global_gain;
-	bal += (core->blue_bal * core->global_gain / (1 << 7));
-	blue_gain = calc_mt9v011_gain(bal);
-
-	bal = core->global_gain;
-	bal += (core->red_bal * core->global_gain / (1 << 7));
-	red_gain = calc_mt9v011_gain(bal);
-
-	mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green_gain);
-	mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN, green_gain);
-	mt9v011_write(sd, R2C_MT9V011_BLUE_GAIN, blue_gain);
-	mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain);
-	mt9v011_write(sd, R09_MT9V011_SHUTTER_WIDTH, exposure);
-}
-
-static void calc_fps(struct v4l2_subdev *sd, u32 *numerator, u32 *denominator)
-{
-	struct mt9v011 *core = to_mt9v011(sd);
-	unsigned height, width, hblank, vblank, speed;
-	unsigned row_time, t_time;
-	u64 frames_per_ms;
-	unsigned tmp;
-
-	height = mt9v011_read(sd, R03_MT9V011_HEIGHT);
-	width = mt9v011_read(sd, R04_MT9V011_WIDTH);
-	hblank = mt9v011_read(sd, R05_MT9V011_HBLANK);
-	vblank = mt9v011_read(sd, R06_MT9V011_VBLANK);
-	speed = mt9v011_read(sd, R0A_MT9V011_CLK_SPEED);
-
-	row_time = (width + 113 + hblank) * (speed + 2);
-	t_time = row_time * (height + vblank + 1);
-
-	frames_per_ms = core->xtal * 1000l;
-	do_div(frames_per_ms, t_time);
-	tmp = frames_per_ms;
-
-	v4l2_dbg(1, debug, sd, "Programmed to %u.%03u fps (%d pixel clcks)\n",
-		tmp / 1000, tmp % 1000, t_time);
-
-	if (numerator && denominator) {
-		*numerator = 1000;
-		*denominator = (u32)frames_per_ms;
-	}
-}
-
-static u16 calc_speed(struct v4l2_subdev *sd, u32 numerator, u32 denominator)
-{
-	struct mt9v011 *core = to_mt9v011(sd);
-	unsigned height, width, hblank, vblank;
-	unsigned row_time, line_time;
-	u64 t_time, speed;
-
-	/* Avoid bogus calculus */
-	if (!numerator || !denominator)
-		return 0;
-
-	height = mt9v011_read(sd, R03_MT9V011_HEIGHT);
-	width = mt9v011_read(sd, R04_MT9V011_WIDTH);
-	hblank = mt9v011_read(sd, R05_MT9V011_HBLANK);
-	vblank = mt9v011_read(sd, R06_MT9V011_VBLANK);
-
-	row_time = width + 113 + hblank;
-	line_time = height + vblank + 1;
-
-	t_time = core->xtal * ((u64)numerator);
-	/* round to the closest value */
-	t_time += denominator / 2;
-	do_div(t_time, denominator);
-
-	speed = t_time;
-	do_div(speed, row_time * line_time);
-
-	/* Avoid having a negative value for speed */
-	if (speed < 2)
-		speed = 0;
-	else
-		speed -= 2;
-
-	/* Avoid speed overflow */
-	if (speed > 15)
-		return 15;
-
-	return (u16)speed;
-}
-
-static void set_res(struct v4l2_subdev *sd)
-{
-	struct mt9v011 *core = to_mt9v011(sd);
-	unsigned vstart, hstart;
-
-	/*
-	 * The mt9v011 doesn't have scaling. So, in order to select the desired
-	 * resolution, we're cropping at the middle of the sensor.
-	 * hblank and vblank should be adjusted, in order to warrant that
-	 * we'll preserve the line timings for 30 fps, no matter what resolution
-	 * is selected.
-	 * NOTE: datasheet says that width (and height) should be filled with
-	 * width-1. However, this doesn't work, since one pixel per line will
-	 * be missing.
-	 */
-
-	hstart = 20 + (640 - core->width) / 2;
-	mt9v011_write(sd, R02_MT9V011_COLSTART, hstart);
-	mt9v011_write(sd, R04_MT9V011_WIDTH, core->width);
-	mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width);
-
-	vstart = 8 + (480 - core->height) / 2;
-	mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart);
-	mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height);
-	mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height);
-
-	calc_fps(sd, NULL, NULL);
-};
-
-static void set_read_mode(struct v4l2_subdev *sd)
-{
-	struct mt9v011 *core = to_mt9v011(sd);
-	unsigned mode = 0x1000;
-
-	if (core->hflip)
-		mode |= 0x4000;
-
-	if (core->vflip)
-		mode |= 0x8000;
-
-	mt9v011_write(sd, R20_MT9V011_READ_MODE, mode);
-}
-
-static int mt9v011_reset(struct v4l2_subdev *sd, u32 val)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(mt9v011_init_default); i++)
-		mt9v011_write(sd, mt9v011_init_default[i].reg,
-			       mt9v011_init_default[i].value);
-
-	set_balance(sd);
-	set_res(sd);
-	set_read_mode(sd);
-
-	return 0;
-};
-
-static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct mt9v011 *core = to_mt9v011(sd);
-
-	v4l2_dbg(1, debug, sd, "g_ctrl called\n");
-
-	switch (ctrl->id) {
-	case V4L2_CID_GAIN:
-		ctrl->value = core->global_gain;
-		return 0;
-	case V4L2_CID_EXPOSURE:
-		ctrl->value = core->exposure;
-		return 0;
-	case V4L2_CID_RED_BALANCE:
-		ctrl->value = core->red_bal;
-		return 0;
-	case V4L2_CID_BLUE_BALANCE:
-		ctrl->value = core->blue_bal;
-		return 0;
-	case V4L2_CID_HFLIP:
-		ctrl->value = core->hflip ? 1 : 0;
-		return 0;
-	case V4L2_CID_VFLIP:
-		ctrl->value = core->vflip ? 1 : 0;
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static int mt9v011_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
-	int i;
-
-	v4l2_dbg(1, debug, sd, "queryctrl called\n");
-
-	for (i = 0; i < ARRAY_SIZE(mt9v011_qctrl); i++)
-		if (qc->id && qc->id == mt9v011_qctrl[i].id) {
-			memcpy(qc, &(mt9v011_qctrl[i]),
-			       sizeof(*qc));
-			return 0;
-		}
-
-	return -EINVAL;
-}
-
-
-static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct mt9v011 *core = to_mt9v011(sd);
-	u8 i, n;
-	n = ARRAY_SIZE(mt9v011_qctrl);
-
-	for (i = 0; i < n; i++) {
-		if (ctrl->id != mt9v011_qctrl[i].id)
-			continue;
-		if (ctrl->value < mt9v011_qctrl[i].minimum ||
-		    ctrl->value > mt9v011_qctrl[i].maximum)
-			return -ERANGE;
-		v4l2_dbg(1, debug, sd, "s_ctrl: id=%d, value=%d\n",
-					ctrl->id, ctrl->value);
-		break;
-	}
-
-	switch (ctrl->id) {
-	case V4L2_CID_GAIN:
-		core->global_gain = ctrl->value;
-		break;
-	case V4L2_CID_EXPOSURE:
-		core->exposure = ctrl->value;
-		break;
-	case V4L2_CID_RED_BALANCE:
-		core->red_bal = ctrl->value;
-		break;
-	case V4L2_CID_BLUE_BALANCE:
-		core->blue_bal = ctrl->value;
-		break;
-	case V4L2_CID_HFLIP:
-		core->hflip = ctrl->value;
-		set_read_mode(sd);
-		return 0;
-	case V4L2_CID_VFLIP:
-		core->vflip = ctrl->value;
-		set_read_mode(sd);
-		return 0;
-	default:
-		return -EINVAL;
-	}
-
-	set_balance(sd);
-
-	return 0;
-}
-
-static int mt9v011_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
-					enum v4l2_mbus_pixelcode *code)
-{
-	if (index > 0)
-		return -EINVAL;
-
-	*code = V4L2_MBUS_FMT_SGRBG8_1X8;
-	return 0;
-}
-
-static int mt9v011_try_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
-{
-	if (fmt->code != V4L2_MBUS_FMT_SGRBG8_1X8)
-		return -EINVAL;
-
-	v4l_bound_align_image(&fmt->width, 48, 639, 1,
-			      &fmt->height, 32, 480, 1, 0);
-	fmt->field = V4L2_FIELD_NONE;
-	fmt->colorspace = V4L2_COLORSPACE_SRGB;
-
-	return 0;
-}
-
-static int mt9v011_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
-{
-	struct v4l2_captureparm *cp = &parms->parm.capture;
-
-	if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-
-	memset(cp, 0, sizeof(struct v4l2_captureparm));
-	cp->capability = V4L2_CAP_TIMEPERFRAME;
-	calc_fps(sd,
-		 &cp->timeperframe.numerator,
-		 &cp->timeperframe.denominator);
-
-	return 0;
-}
-
-static int mt9v011_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
-{
-	struct v4l2_captureparm *cp = &parms->parm.capture;
-	struct v4l2_fract *tpf = &cp->timeperframe;
-	u16 speed;
-
-	if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	if (cp->extendedmode != 0)
-		return -EINVAL;
-
-	speed = calc_speed(sd, tpf->numerator, tpf->denominator);
-
-	mt9v011_write(sd, R0A_MT9V011_CLK_SPEED, speed);
-	v4l2_dbg(1, debug, sd, "Setting speed to %d\n", speed);
-
-	/* Recalculate and update fps info */
-	calc_fps(sd, &tpf->numerator, &tpf->denominator);
-
-	return 0;
-}
-
-static int mt9v011_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
-{
-	struct mt9v011 *core = to_mt9v011(sd);
-	int rc;
-
-	rc = mt9v011_try_mbus_fmt(sd, fmt);
-	if (rc < 0)
-		return -EINVAL;
-
-	core->width = fmt->width;
-	core->height = fmt->height;
-
-	set_res(sd);
-
-	return 0;
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int mt9v011_g_register(struct v4l2_subdev *sd,
-			      struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-
-	reg->val = mt9v011_read(sd, reg->reg & 0xff);
-	reg->size = 2;
-
-	return 0;
-}
-
-static int mt9v011_s_register(struct v4l2_subdev *sd,
-			      struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-
-	mt9v011_write(sd, reg->reg & 0xff, reg->val & 0xffff);
-
-	return 0;
-}
-#endif
-
-static int mt9v011_g_chip_ident(struct v4l2_subdev *sd,
-				struct v4l2_dbg_chip_ident *chip)
-{
-	u16 version;
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_MT9V011,
-					  version);
-}
-
-static const struct v4l2_subdev_core_ops mt9v011_core_ops = {
-	.queryctrl = mt9v011_queryctrl,
-	.g_ctrl = mt9v011_g_ctrl,
-	.s_ctrl = mt9v011_s_ctrl,
-	.reset = mt9v011_reset,
-	.g_chip_ident = mt9v011_g_chip_ident,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.g_register = mt9v011_g_register,
-	.s_register = mt9v011_s_register,
-#endif
-};
-
-static const struct v4l2_subdev_video_ops mt9v011_video_ops = {
-	.enum_mbus_fmt = mt9v011_enum_mbus_fmt,
-	.try_mbus_fmt = mt9v011_try_mbus_fmt,
-	.s_mbus_fmt = mt9v011_s_mbus_fmt,
-	.g_parm = mt9v011_g_parm,
-	.s_parm = mt9v011_s_parm,
-};
-
-static const struct v4l2_subdev_ops mt9v011_ops = {
-	.core  = &mt9v011_core_ops,
-	.video = &mt9v011_video_ops,
-};
-
-
-/****************************************************************************
-			I2C Client & Driver
- ****************************************************************************/
-
-static int mt9v011_probe(struct i2c_client *c,
-			 const struct i2c_device_id *id)
-{
-	u16 version;
-	struct mt9v011 *core;
-	struct v4l2_subdev *sd;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(c->adapter,
-	     I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
-		return -EIO;
-
-	core = kzalloc(sizeof(struct mt9v011), GFP_KERNEL);
-	if (!core)
-		return -ENOMEM;
-
-	sd = &core->sd;
-	v4l2_i2c_subdev_init(sd, c, &mt9v011_ops);
-
-	/* Check if the sensor is really a MT9V011 */
-	version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION);
-	if ((version != MT9V011_VERSION) &&
-	    (version != MT9V011_REV_B_VERSION)) {
-		v4l2_info(sd, "*** unknown micron chip detected (0x%04x).\n",
-			  version);
-		kfree(core);
-		return -EINVAL;
-	}
-
-	core->global_gain = 0x0024;
-	core->exposure = 0x01fc;
-	core->width  = 640;
-	core->height = 480;
-	core->xtal = 27000000;	/* Hz */
-
-	if (c->dev.platform_data) {
-		struct mt9v011_platform_data *pdata = c->dev.platform_data;
-
-		core->xtal = pdata->xtal;
-		v4l2_dbg(1, debug, sd, "xtal set to %d.%03d MHz\n",
-			core->xtal / 1000000, (core->xtal / 1000) % 1000);
-	}
-
-	v4l_info(c, "chip found @ 0x%02x (%s - chip version 0x%04x)\n",
-		 c->addr << 1, c->adapter->name, version);
-
-	return 0;
-}
-
-static int mt9v011_remove(struct i2c_client *c)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(c);
-
-	v4l2_dbg(1, debug, sd,
-		"mt9v011.c: removing mt9v011 adapter on address 0x%x\n",
-		c->addr << 1);
-
-	v4l2_device_unregister_subdev(sd);
-	kfree(to_mt9v011(sd));
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct i2c_device_id mt9v011_id[] = {
-	{ "mt9v011", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, mt9v011_id);
-
-static struct i2c_driver mt9v011_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "mt9v011",
-	},
-	.probe		= mt9v011_probe,
-	.remove		= mt9v011_remove,
-	.id_table	= mt9v011_id,
-};
-
-module_i2c_driver(mt9v011_driver);
diff --git a/drivers/media/video/mt9v032.c b/drivers/media/video/mt9v032.c
deleted file mode 100644
index 4ba4884..0000000
--- a/drivers/media/video/mt9v032.c
+++ /dev/null
@@ -1,763 +0,0 @@
-/*
- * Driver for MT9V032 CMOS Image Sensor from Micron
- *
- * Copyright (C) 2010, Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- *
- * Based on the MT9M001 driver,
- *
- * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/log2.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
-#include <linux/videodev2.h>
-#include <linux/v4l2-mediabus.h>
-#include <linux/module.h>
-
-#include <media/mt9v032.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-subdev.h>
-
-#define MT9V032_PIXEL_ARRAY_HEIGHT			492
-#define MT9V032_PIXEL_ARRAY_WIDTH			782
-
-#define MT9V032_CHIP_VERSION				0x00
-#define		MT9V032_CHIP_ID_REV1			0x1311
-#define		MT9V032_CHIP_ID_REV3			0x1313
-#define MT9V032_COLUMN_START				0x01
-#define		MT9V032_COLUMN_START_MIN		1
-#define		MT9V032_COLUMN_START_DEF		1
-#define		MT9V032_COLUMN_START_MAX		752
-#define MT9V032_ROW_START				0x02
-#define		MT9V032_ROW_START_MIN			4
-#define		MT9V032_ROW_START_DEF			5
-#define		MT9V032_ROW_START_MAX			482
-#define MT9V032_WINDOW_HEIGHT				0x03
-#define		MT9V032_WINDOW_HEIGHT_MIN		1
-#define		MT9V032_WINDOW_HEIGHT_DEF		480
-#define		MT9V032_WINDOW_HEIGHT_MAX		480
-#define MT9V032_WINDOW_WIDTH				0x04
-#define		MT9V032_WINDOW_WIDTH_MIN		1
-#define		MT9V032_WINDOW_WIDTH_DEF		752
-#define		MT9V032_WINDOW_WIDTH_MAX		752
-#define MT9V032_HORIZONTAL_BLANKING			0x05
-#define		MT9V032_HORIZONTAL_BLANKING_MIN		43
-#define		MT9V032_HORIZONTAL_BLANKING_MAX		1023
-#define MT9V032_VERTICAL_BLANKING			0x06
-#define		MT9V032_VERTICAL_BLANKING_MIN		4
-#define		MT9V032_VERTICAL_BLANKING_MAX		3000
-#define MT9V032_CHIP_CONTROL				0x07
-#define		MT9V032_CHIP_CONTROL_MASTER_MODE	(1 << 3)
-#define		MT9V032_CHIP_CONTROL_DOUT_ENABLE	(1 << 7)
-#define		MT9V032_CHIP_CONTROL_SEQUENTIAL		(1 << 8)
-#define MT9V032_SHUTTER_WIDTH1				0x08
-#define MT9V032_SHUTTER_WIDTH2				0x09
-#define MT9V032_SHUTTER_WIDTH_CONTROL			0x0a
-#define MT9V032_TOTAL_SHUTTER_WIDTH			0x0b
-#define		MT9V032_TOTAL_SHUTTER_WIDTH_MIN		1
-#define		MT9V032_TOTAL_SHUTTER_WIDTH_DEF		480
-#define		MT9V032_TOTAL_SHUTTER_WIDTH_MAX		32767
-#define MT9V032_RESET					0x0c
-#define MT9V032_READ_MODE				0x0d
-#define		MT9V032_READ_MODE_ROW_BIN_MASK		(3 << 0)
-#define		MT9V032_READ_MODE_ROW_BIN_SHIFT		0
-#define		MT9V032_READ_MODE_COLUMN_BIN_MASK	(3 << 2)
-#define		MT9V032_READ_MODE_COLUMN_BIN_SHIFT	2
-#define		MT9V032_READ_MODE_ROW_FLIP		(1 << 4)
-#define		MT9V032_READ_MODE_COLUMN_FLIP		(1 << 5)
-#define		MT9V032_READ_MODE_DARK_COLUMNS		(1 << 6)
-#define		MT9V032_READ_MODE_DARK_ROWS		(1 << 7)
-#define MT9V032_PIXEL_OPERATION_MODE			0x0f
-#define		MT9V032_PIXEL_OPERATION_MODE_COLOR	(1 << 2)
-#define		MT9V032_PIXEL_OPERATION_MODE_HDR	(1 << 6)
-#define MT9V032_ANALOG_GAIN				0x35
-#define		MT9V032_ANALOG_GAIN_MIN			16
-#define		MT9V032_ANALOG_GAIN_DEF			16
-#define		MT9V032_ANALOG_GAIN_MAX			64
-#define MT9V032_MAX_ANALOG_GAIN				0x36
-#define		MT9V032_MAX_ANALOG_GAIN_MAX		127
-#define MT9V032_FRAME_DARK_AVERAGE			0x42
-#define MT9V032_DARK_AVG_THRESH				0x46
-#define		MT9V032_DARK_AVG_LOW_THRESH_MASK	(255 << 0)
-#define		MT9V032_DARK_AVG_LOW_THRESH_SHIFT	0
-#define		MT9V032_DARK_AVG_HIGH_THRESH_MASK	(255 << 8)
-#define		MT9V032_DARK_AVG_HIGH_THRESH_SHIFT	8
-#define MT9V032_ROW_NOISE_CORR_CONTROL			0x70
-#define		MT9V032_ROW_NOISE_CORR_ENABLE		(1 << 5)
-#define		MT9V032_ROW_NOISE_CORR_USE_BLK_AVG	(1 << 7)
-#define MT9V032_PIXEL_CLOCK				0x74
-#define		MT9V032_PIXEL_CLOCK_INV_LINE		(1 << 0)
-#define		MT9V032_PIXEL_CLOCK_INV_FRAME		(1 << 1)
-#define		MT9V032_PIXEL_CLOCK_XOR_LINE		(1 << 2)
-#define		MT9V032_PIXEL_CLOCK_CONT_LINE		(1 << 3)
-#define		MT9V032_PIXEL_CLOCK_INV_PXL_CLK		(1 << 4)
-#define MT9V032_TEST_PATTERN				0x7f
-#define		MT9V032_TEST_PATTERN_DATA_MASK		(1023 << 0)
-#define		MT9V032_TEST_PATTERN_DATA_SHIFT		0
-#define		MT9V032_TEST_PATTERN_USE_DATA		(1 << 10)
-#define		MT9V032_TEST_PATTERN_GRAY_MASK		(3 << 11)
-#define		MT9V032_TEST_PATTERN_GRAY_NONE		(0 << 11)
-#define		MT9V032_TEST_PATTERN_GRAY_VERTICAL	(1 << 11)
-#define		MT9V032_TEST_PATTERN_GRAY_HORIZONTAL	(2 << 11)
-#define		MT9V032_TEST_PATTERN_GRAY_DIAGONAL	(3 << 11)
-#define		MT9V032_TEST_PATTERN_ENABLE		(1 << 13)
-#define		MT9V032_TEST_PATTERN_FLIP		(1 << 14)
-#define MT9V032_AEC_AGC_ENABLE				0xaf
-#define		MT9V032_AEC_ENABLE			(1 << 0)
-#define		MT9V032_AGC_ENABLE			(1 << 1)
-#define MT9V032_THERMAL_INFO				0xc1
-
-struct mt9v032 {
-	struct v4l2_subdev subdev;
-	struct media_pad pad;
-
-	struct v4l2_mbus_framefmt format;
-	struct v4l2_rect crop;
-
-	struct v4l2_ctrl_handler ctrls;
-
-	struct mutex power_lock;
-	int power_count;
-
-	struct mt9v032_platform_data *pdata;
-	u16 chip_control;
-	u16 aec_agc;
-};
-
-static struct mt9v032 *to_mt9v032(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct mt9v032, subdev);
-}
-
-static int mt9v032_read(struct i2c_client *client, const u8 reg)
-{
-	s32 data = i2c_smbus_read_word_swapped(client, reg);
-	dev_dbg(&client->dev, "%s: read 0x%04x from 0x%02x\n", __func__,
-		data, reg);
-	return data;
-}
-
-static int mt9v032_write(struct i2c_client *client, const u8 reg,
-			 const u16 data)
-{
-	dev_dbg(&client->dev, "%s: writing 0x%04x to 0x%02x\n", __func__,
-		data, reg);
-	return i2c_smbus_write_word_swapped(client, reg, data);
-}
-
-static int mt9v032_set_chip_control(struct mt9v032 *mt9v032, u16 clear, u16 set)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev);
-	u16 value = (mt9v032->chip_control & ~clear) | set;
-	int ret;
-
-	ret = mt9v032_write(client, MT9V032_CHIP_CONTROL, value);
-	if (ret < 0)
-		return ret;
-
-	mt9v032->chip_control = value;
-	return 0;
-}
-
-static int
-mt9v032_update_aec_agc(struct mt9v032 *mt9v032, u16 which, int enable)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev);
-	u16 value = mt9v032->aec_agc;
-	int ret;
-
-	if (enable)
-		value |= which;
-	else
-		value &= ~which;
-
-	ret = mt9v032_write(client, MT9V032_AEC_AGC_ENABLE, value);
-	if (ret < 0)
-		return ret;
-
-	mt9v032->aec_agc = value;
-	return 0;
-}
-
-static int mt9v032_power_on(struct mt9v032 *mt9v032)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev);
-	int ret;
-
-	if (mt9v032->pdata->set_clock) {
-		mt9v032->pdata->set_clock(&mt9v032->subdev, 25000000);
-		udelay(1);
-	}
-
-	/* Reset the chip and stop data read out */
-	ret = mt9v032_write(client, MT9V032_RESET, 1);
-	if (ret < 0)
-		return ret;
-
-	ret = mt9v032_write(client, MT9V032_RESET, 0);
-	if (ret < 0)
-		return ret;
-
-	return mt9v032_write(client, MT9V032_CHIP_CONTROL, 0);
-}
-
-static void mt9v032_power_off(struct mt9v032 *mt9v032)
-{
-	if (mt9v032->pdata->set_clock)
-		mt9v032->pdata->set_clock(&mt9v032->subdev, 0);
-}
-
-static int __mt9v032_set_power(struct mt9v032 *mt9v032, bool on)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev);
-	int ret;
-
-	if (!on) {
-		mt9v032_power_off(mt9v032);
-		return 0;
-	}
-
-	ret = mt9v032_power_on(mt9v032);
-	if (ret < 0)
-		return ret;
-
-	/* Configure the pixel clock polarity */
-	if (mt9v032->pdata && mt9v032->pdata->clk_pol) {
-		ret = mt9v032_write(client, MT9V032_PIXEL_CLOCK,
-				MT9V032_PIXEL_CLOCK_INV_PXL_CLK);
-		if (ret < 0)
-			return ret;
-	}
-
-	/* Disable the noise correction algorithm and restore the controls. */
-	ret = mt9v032_write(client, MT9V032_ROW_NOISE_CORR_CONTROL, 0);
-	if (ret < 0)
-		return ret;
-
-	return v4l2_ctrl_handler_setup(&mt9v032->ctrls);
-}
-
-/* -----------------------------------------------------------------------------
- * V4L2 subdev video operations
- */
-
-static struct v4l2_mbus_framefmt *
-__mt9v032_get_pad_format(struct mt9v032 *mt9v032, struct v4l2_subdev_fh *fh,
-			 unsigned int pad, enum v4l2_subdev_format_whence which)
-{
-	switch (which) {
-	case V4L2_SUBDEV_FORMAT_TRY:
-		return v4l2_subdev_get_try_format(fh, pad);
-	case V4L2_SUBDEV_FORMAT_ACTIVE:
-		return &mt9v032->format;
-	default:
-		return NULL;
-	}
-}
-
-static struct v4l2_rect *
-__mt9v032_get_pad_crop(struct mt9v032 *mt9v032, struct v4l2_subdev_fh *fh,
-		       unsigned int pad, enum v4l2_subdev_format_whence which)
-{
-	switch (which) {
-	case V4L2_SUBDEV_FORMAT_TRY:
-		return v4l2_subdev_get_try_crop(fh, pad);
-	case V4L2_SUBDEV_FORMAT_ACTIVE:
-		return &mt9v032->crop;
-	default:
-		return NULL;
-	}
-}
-
-static int mt9v032_s_stream(struct v4l2_subdev *subdev, int enable)
-{
-	const u16 mode = MT9V032_CHIP_CONTROL_MASTER_MODE
-		       | MT9V032_CHIP_CONTROL_DOUT_ENABLE
-		       | MT9V032_CHIP_CONTROL_SEQUENTIAL;
-	struct i2c_client *client = v4l2_get_subdevdata(subdev);
-	struct mt9v032 *mt9v032 = to_mt9v032(subdev);
-	struct v4l2_mbus_framefmt *format = &mt9v032->format;
-	struct v4l2_rect *crop = &mt9v032->crop;
-	unsigned int hratio;
-	unsigned int vratio;
-	int ret;
-
-	if (!enable)
-		return mt9v032_set_chip_control(mt9v032, mode, 0);
-
-	/* Configure the window size and row/column bin */
-	hratio = DIV_ROUND_CLOSEST(crop->width, format->width);
-	vratio = DIV_ROUND_CLOSEST(crop->height, format->height);
-
-	ret = mt9v032_write(client, MT9V032_READ_MODE,
-		    (hratio - 1) << MT9V032_READ_MODE_ROW_BIN_SHIFT |
-		    (vratio - 1) << MT9V032_READ_MODE_COLUMN_BIN_SHIFT);
-	if (ret < 0)
-		return ret;
-
-	ret = mt9v032_write(client, MT9V032_COLUMN_START, crop->left);
-	if (ret < 0)
-		return ret;
-
-	ret = mt9v032_write(client, MT9V032_ROW_START, crop->top);
-	if (ret < 0)
-		return ret;
-
-	ret = mt9v032_write(client, MT9V032_WINDOW_WIDTH, crop->width);
-	if (ret < 0)
-		return ret;
-
-	ret = mt9v032_write(client, MT9V032_WINDOW_HEIGHT, crop->height);
-	if (ret < 0)
-		return ret;
-
-	ret = mt9v032_write(client, MT9V032_HORIZONTAL_BLANKING,
-			    max(43, 660 - crop->width));
-	if (ret < 0)
-		return ret;
-
-	/* Switch to master "normal" mode */
-	return mt9v032_set_chip_control(mt9v032, 0, mode);
-}
-
-static int mt9v032_enum_mbus_code(struct v4l2_subdev *subdev,
-				  struct v4l2_subdev_fh *fh,
-				  struct v4l2_subdev_mbus_code_enum *code)
-{
-	if (code->index > 0)
-		return -EINVAL;
-
-	code->code = V4L2_MBUS_FMT_SGRBG10_1X10;
-	return 0;
-}
-
-static int mt9v032_enum_frame_size(struct v4l2_subdev *subdev,
-				   struct v4l2_subdev_fh *fh,
-				   struct v4l2_subdev_frame_size_enum *fse)
-{
-	if (fse->index >= 8 || fse->code != V4L2_MBUS_FMT_SGRBG10_1X10)
-		return -EINVAL;
-
-	fse->min_width = MT9V032_WINDOW_WIDTH_DEF / fse->index;
-	fse->max_width = fse->min_width;
-	fse->min_height = MT9V032_WINDOW_HEIGHT_DEF / fse->index;
-	fse->max_height = fse->min_height;
-
-	return 0;
-}
-
-static int mt9v032_get_format(struct v4l2_subdev *subdev,
-			      struct v4l2_subdev_fh *fh,
-			      struct v4l2_subdev_format *format)
-{
-	struct mt9v032 *mt9v032 = to_mt9v032(subdev);
-
-	format->format = *__mt9v032_get_pad_format(mt9v032, fh, format->pad,
-						   format->which);
-	return 0;
-}
-
-static int mt9v032_set_format(struct v4l2_subdev *subdev,
-			      struct v4l2_subdev_fh *fh,
-			      struct v4l2_subdev_format *format)
-{
-	struct mt9v032 *mt9v032 = to_mt9v032(subdev);
-	struct v4l2_mbus_framefmt *__format;
-	struct v4l2_rect *__crop;
-	unsigned int width;
-	unsigned int height;
-	unsigned int hratio;
-	unsigned int vratio;
-
-	__crop = __mt9v032_get_pad_crop(mt9v032, fh, format->pad,
-					format->which);
-
-	/* Clamp the width and height to avoid dividing by zero. */
-	width = clamp_t(unsigned int, ALIGN(format->format.width, 2),
-			max(__crop->width / 8, MT9V032_WINDOW_WIDTH_MIN),
-			__crop->width);
-	height = clamp_t(unsigned int, ALIGN(format->format.height, 2),
-			 max(__crop->height / 8, MT9V032_WINDOW_HEIGHT_MIN),
-			 __crop->height);
-
-	hratio = DIV_ROUND_CLOSEST(__crop->width, width);
-	vratio = DIV_ROUND_CLOSEST(__crop->height, height);
-
-	__format = __mt9v032_get_pad_format(mt9v032, fh, format->pad,
-					    format->which);
-	__format->width = __crop->width / hratio;
-	__format->height = __crop->height / vratio;
-
-	format->format = *__format;
-
-	return 0;
-}
-
-static int mt9v032_get_crop(struct v4l2_subdev *subdev,
-			    struct v4l2_subdev_fh *fh,
-			    struct v4l2_subdev_crop *crop)
-{
-	struct mt9v032 *mt9v032 = to_mt9v032(subdev);
-
-	crop->rect = *__mt9v032_get_pad_crop(mt9v032, fh, crop->pad,
-					     crop->which);
-	return 0;
-}
-
-static int mt9v032_set_crop(struct v4l2_subdev *subdev,
-			    struct v4l2_subdev_fh *fh,
-			    struct v4l2_subdev_crop *crop)
-{
-	struct mt9v032 *mt9v032 = to_mt9v032(subdev);
-	struct v4l2_mbus_framefmt *__format;
-	struct v4l2_rect *__crop;
-	struct v4l2_rect rect;
-
-	/* Clamp the crop rectangle boundaries and align them to a non multiple
-	 * of 2 pixels to ensure a GRBG Bayer pattern.
-	 */
-	rect.left = clamp(ALIGN(crop->rect.left + 1, 2) - 1,
-			  MT9V032_COLUMN_START_MIN,
-			  MT9V032_COLUMN_START_MAX);
-	rect.top = clamp(ALIGN(crop->rect.top + 1, 2) - 1,
-			 MT9V032_ROW_START_MIN,
-			 MT9V032_ROW_START_MAX);
-	rect.width = clamp(ALIGN(crop->rect.width, 2),
-			   MT9V032_WINDOW_WIDTH_MIN,
-			   MT9V032_WINDOW_WIDTH_MAX);
-	rect.height = clamp(ALIGN(crop->rect.height, 2),
-			    MT9V032_WINDOW_HEIGHT_MIN,
-			    MT9V032_WINDOW_HEIGHT_MAX);
-
-	rect.width = min(rect.width, MT9V032_PIXEL_ARRAY_WIDTH - rect.left);
-	rect.height = min(rect.height, MT9V032_PIXEL_ARRAY_HEIGHT - rect.top);
-
-	__crop = __mt9v032_get_pad_crop(mt9v032, fh, crop->pad, crop->which);
-
-	if (rect.width != __crop->width || rect.height != __crop->height) {
-		/* Reset the output image size if the crop rectangle size has
-		 * been modified.
-		 */
-		__format = __mt9v032_get_pad_format(mt9v032, fh, crop->pad,
-						    crop->which);
-		__format->width = rect.width;
-		__format->height = rect.height;
-	}
-
-	*__crop = rect;
-	crop->rect = rect;
-
-	return 0;
-}
-
-/* -----------------------------------------------------------------------------
- * V4L2 subdev control operations
- */
-
-#define V4L2_CID_TEST_PATTERN		(V4L2_CID_USER_BASE | 0x1001)
-
-static int mt9v032_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct mt9v032 *mt9v032 =
-			container_of(ctrl->handler, struct mt9v032, ctrls);
-	struct i2c_client *client = v4l2_get_subdevdata(&mt9v032->subdev);
-	u16 data;
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUTOGAIN:
-		return mt9v032_update_aec_agc(mt9v032, MT9V032_AGC_ENABLE,
-					      ctrl->val);
-
-	case V4L2_CID_GAIN:
-		return mt9v032_write(client, MT9V032_ANALOG_GAIN, ctrl->val);
-
-	case V4L2_CID_EXPOSURE_AUTO:
-		return mt9v032_update_aec_agc(mt9v032, MT9V032_AEC_ENABLE,
-					      !ctrl->val);
-
-	case V4L2_CID_EXPOSURE:
-		return mt9v032_write(client, MT9V032_TOTAL_SHUTTER_WIDTH,
-				     ctrl->val);
-
-	case V4L2_CID_TEST_PATTERN:
-		switch (ctrl->val) {
-		case 0:
-			data = 0;
-			break;
-		case 1:
-			data = MT9V032_TEST_PATTERN_GRAY_VERTICAL
-			     | MT9V032_TEST_PATTERN_ENABLE;
-			break;
-		case 2:
-			data = MT9V032_TEST_PATTERN_GRAY_HORIZONTAL
-			     | MT9V032_TEST_PATTERN_ENABLE;
-			break;
-		case 3:
-			data = MT9V032_TEST_PATTERN_GRAY_DIAGONAL
-			     | MT9V032_TEST_PATTERN_ENABLE;
-			break;
-		default:
-			data = (ctrl->val << MT9V032_TEST_PATTERN_DATA_SHIFT)
-			     | MT9V032_TEST_PATTERN_USE_DATA
-			     | MT9V032_TEST_PATTERN_ENABLE
-			     | MT9V032_TEST_PATTERN_FLIP;
-			break;
-		}
-
-		return mt9v032_write(client, MT9V032_TEST_PATTERN, data);
-	}
-
-	return 0;
-}
-
-static struct v4l2_ctrl_ops mt9v032_ctrl_ops = {
-	.s_ctrl = mt9v032_s_ctrl,
-};
-
-static const struct v4l2_ctrl_config mt9v032_ctrls[] = {
-	{
-		.ops		= &mt9v032_ctrl_ops,
-		.id		= V4L2_CID_TEST_PATTERN,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Test pattern",
-		.min		= 0,
-		.max		= 1023,
-		.step		= 1,
-		.def		= 0,
-		.flags		= 0,
-	}
-};
-
-/* -----------------------------------------------------------------------------
- * V4L2 subdev core operations
- */
-
-static int mt9v032_set_power(struct v4l2_subdev *subdev, int on)
-{
-	struct mt9v032 *mt9v032 = to_mt9v032(subdev);
-	int ret = 0;
-
-	mutex_lock(&mt9v032->power_lock);
-
-	/* If the power count is modified from 0 to != 0 or from != 0 to 0,
-	 * update the power state.
-	 */
-	if (mt9v032->power_count == !on) {
-		ret = __mt9v032_set_power(mt9v032, !!on);
-		if (ret < 0)
-			goto done;
-	}
-
-	/* Update the power count. */
-	mt9v032->power_count += on ? 1 : -1;
-	WARN_ON(mt9v032->power_count < 0);
-
-done:
-	mutex_unlock(&mt9v032->power_lock);
-	return ret;
-}
-
-/* -----------------------------------------------------------------------------
- * V4L2 subdev internal operations
- */
-
-static int mt9v032_registered(struct v4l2_subdev *subdev)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(subdev);
-	struct mt9v032 *mt9v032 = to_mt9v032(subdev);
-	s32 data;
-	int ret;
-
-	dev_info(&client->dev, "Probing MT9V032 at address 0x%02x\n",
-			client->addr);
-
-	ret = mt9v032_power_on(mt9v032);
-	if (ret < 0) {
-		dev_err(&client->dev, "MT9V032 power up failed\n");
-		return ret;
-	}
-
-	/* Read and check the sensor version */
-	data = mt9v032_read(client, MT9V032_CHIP_VERSION);
-	if (data != MT9V032_CHIP_ID_REV1 && data != MT9V032_CHIP_ID_REV3) {
-		dev_err(&client->dev, "MT9V032 not detected, wrong version "
-				"0x%04x\n", data);
-		return -ENODEV;
-	}
-
-	mt9v032_power_off(mt9v032);
-
-	dev_info(&client->dev, "MT9V032 detected at address 0x%02x\n",
-			client->addr);
-
-	return ret;
-}
-
-static int mt9v032_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
-{
-	struct v4l2_mbus_framefmt *format;
-	struct v4l2_rect *crop;
-
-	crop = v4l2_subdev_get_try_crop(fh, 0);
-	crop->left = MT9V032_COLUMN_START_DEF;
-	crop->top = MT9V032_ROW_START_DEF;
-	crop->width = MT9V032_WINDOW_WIDTH_DEF;
-	crop->height = MT9V032_WINDOW_HEIGHT_DEF;
-
-	format = v4l2_subdev_get_try_format(fh, 0);
-	format->code = V4L2_MBUS_FMT_SGRBG10_1X10;
-	format->width = MT9V032_WINDOW_WIDTH_DEF;
-	format->height = MT9V032_WINDOW_HEIGHT_DEF;
-	format->field = V4L2_FIELD_NONE;
-	format->colorspace = V4L2_COLORSPACE_SRGB;
-
-	return mt9v032_set_power(subdev, 1);
-}
-
-static int mt9v032_close(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
-{
-	return mt9v032_set_power(subdev, 0);
-}
-
-static struct v4l2_subdev_core_ops mt9v032_subdev_core_ops = {
-	.s_power	= mt9v032_set_power,
-};
-
-static struct v4l2_subdev_video_ops mt9v032_subdev_video_ops = {
-	.s_stream	= mt9v032_s_stream,
-};
-
-static struct v4l2_subdev_pad_ops mt9v032_subdev_pad_ops = {
-	.enum_mbus_code = mt9v032_enum_mbus_code,
-	.enum_frame_size = mt9v032_enum_frame_size,
-	.get_fmt = mt9v032_get_format,
-	.set_fmt = mt9v032_set_format,
-	.get_crop = mt9v032_get_crop,
-	.set_crop = mt9v032_set_crop,
-};
-
-static struct v4l2_subdev_ops mt9v032_subdev_ops = {
-	.core	= &mt9v032_subdev_core_ops,
-	.video	= &mt9v032_subdev_video_ops,
-	.pad	= &mt9v032_subdev_pad_ops,
-};
-
-static const struct v4l2_subdev_internal_ops mt9v032_subdev_internal_ops = {
-	.registered = mt9v032_registered,
-	.open = mt9v032_open,
-	.close = mt9v032_close,
-};
-
-/* -----------------------------------------------------------------------------
- * Driver initialization and probing
- */
-
-static int mt9v032_probe(struct i2c_client *client,
-		const struct i2c_device_id *did)
-{
-	struct mt9v032 *mt9v032;
-	unsigned int i;
-	int ret;
-
-	if (!i2c_check_functionality(client->adapter,
-				     I2C_FUNC_SMBUS_WORD_DATA)) {
-		dev_warn(&client->adapter->dev,
-			 "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
-		return -EIO;
-	}
-
-	mt9v032 = kzalloc(sizeof(*mt9v032), GFP_KERNEL);
-	if (!mt9v032)
-		return -ENOMEM;
-
-	mutex_init(&mt9v032->power_lock);
-	mt9v032->pdata = client->dev.platform_data;
-
-	v4l2_ctrl_handler_init(&mt9v032->ctrls, ARRAY_SIZE(mt9v032_ctrls) + 4);
-
-	v4l2_ctrl_new_std(&mt9v032->ctrls, &mt9v032_ctrl_ops,
-			  V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
-	v4l2_ctrl_new_std(&mt9v032->ctrls, &mt9v032_ctrl_ops,
-			  V4L2_CID_GAIN, MT9V032_ANALOG_GAIN_MIN,
-			  MT9V032_ANALOG_GAIN_MAX, 1, MT9V032_ANALOG_GAIN_DEF);
-	v4l2_ctrl_new_std_menu(&mt9v032->ctrls, &mt9v032_ctrl_ops,
-			       V4L2_CID_EXPOSURE_AUTO, V4L2_EXPOSURE_MANUAL, 0,
-			       V4L2_EXPOSURE_AUTO);
-	v4l2_ctrl_new_std(&mt9v032->ctrls, &mt9v032_ctrl_ops,
-			  V4L2_CID_EXPOSURE, MT9V032_TOTAL_SHUTTER_WIDTH_MIN,
-			  MT9V032_TOTAL_SHUTTER_WIDTH_MAX, 1,
-			  MT9V032_TOTAL_SHUTTER_WIDTH_DEF);
-
-	for (i = 0; i < ARRAY_SIZE(mt9v032_ctrls); ++i)
-		v4l2_ctrl_new_custom(&mt9v032->ctrls, &mt9v032_ctrls[i], NULL);
-
-	mt9v032->subdev.ctrl_handler = &mt9v032->ctrls;
-
-	if (mt9v032->ctrls.error)
-		printk(KERN_INFO "%s: control initialization error %d\n",
-		       __func__, mt9v032->ctrls.error);
-
-	mt9v032->crop.left = MT9V032_COLUMN_START_DEF;
-	mt9v032->crop.top = MT9V032_ROW_START_DEF;
-	mt9v032->crop.width = MT9V032_WINDOW_WIDTH_DEF;
-	mt9v032->crop.height = MT9V032_WINDOW_HEIGHT_DEF;
-
-	mt9v032->format.code = V4L2_MBUS_FMT_SGRBG10_1X10;
-	mt9v032->format.width = MT9V032_WINDOW_WIDTH_DEF;
-	mt9v032->format.height = MT9V032_WINDOW_HEIGHT_DEF;
-	mt9v032->format.field = V4L2_FIELD_NONE;
-	mt9v032->format.colorspace = V4L2_COLORSPACE_SRGB;
-
-	mt9v032->aec_agc = MT9V032_AEC_ENABLE | MT9V032_AGC_ENABLE;
-
-	v4l2_i2c_subdev_init(&mt9v032->subdev, client, &mt9v032_subdev_ops);
-	mt9v032->subdev.internal_ops = &mt9v032_subdev_internal_ops;
-	mt9v032->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
-
-	mt9v032->pad.flags = MEDIA_PAD_FL_SOURCE;
-	ret = media_entity_init(&mt9v032->subdev.entity, 1, &mt9v032->pad, 0);
-	if (ret < 0)
-		kfree(mt9v032);
-
-	return ret;
-}
-
-static int mt9v032_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
-	struct mt9v032 *mt9v032 = to_mt9v032(subdev);
-
-	v4l2_device_unregister_subdev(subdev);
-	media_entity_cleanup(&subdev->entity);
-	kfree(mt9v032);
-	return 0;
-}
-
-static const struct i2c_device_id mt9v032_id[] = {
-	{ "mt9v032", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, mt9v032_id);
-
-static struct i2c_driver mt9v032_driver = {
-	.driver = {
-		.name = "mt9v032",
-	},
-	.probe		= mt9v032_probe,
-	.remove		= mt9v032_remove,
-	.id_table	= mt9v032_id,
-};
-
-module_i2c_driver(mt9v032_driver);
-
-MODULE_DESCRIPTION("Aptina MT9V032 Camera driver");
-MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/noon010pc30.c b/drivers/media/video/noon010pc30.c
deleted file mode 100644
index 440c129..0000000
--- a/drivers/media/video/noon010pc30.c
+++ /dev/null
@@ -1,851 +0,0 @@
-/*
- * Driver for SiliconFile NOON010PC30 CIF (1/11") Image Sensor with ISP
- *
- * Copyright (C) 2010 - 2011 Samsung Electronics Co., Ltd.
- * Contact: Sylwester Nawrocki, <s.nawrocki@samsung.com>
- *
- * Initial register configuration based on a driver authored by
- * HeungJun Kim <riverful.kim@samsung.com>.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/regulator/consumer.h>
-#include <media/noon010pc30.h>
-#include <media/v4l2-chip-ident.h>
-#include <linux/videodev2.h>
-#include <linux/module.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-mediabus.h>
-#include <media/v4l2-subdev.h>
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Enable module debug trace. Set to 1 to enable.");
-
-#define MODULE_NAME		"NOON010PC30"
-
-/*
- * Register offsets within a page
- * b15..b8 - page id, b7..b0 - register address
- */
-#define POWER_CTRL_REG		0x0001
-#define PAGEMODE_REG		0x03
-#define DEVICE_ID_REG		0x0004
-#define NOON010PC30_ID		0x86
-#define VDO_CTL_REG(n)		(0x0010 + (n))
-#define SYNC_CTL_REG		0x0012
-/* Window size and position */
-#define WIN_ROWH_REG		0x0013
-#define WIN_ROWL_REG		0x0014
-#define WIN_COLH_REG		0x0015
-#define WIN_COLL_REG		0x0016
-#define WIN_HEIGHTH_REG		0x0017
-#define WIN_HEIGHTL_REG		0x0018
-#define WIN_WIDTHH_REG		0x0019
-#define WIN_WIDTHL_REG		0x001A
-#define HBLANKH_REG		0x001B
-#define HBLANKL_REG		0x001C
-#define VSYNCH_REG		0x001D
-#define VSYNCL_REG		0x001E
-/* VSYNC control */
-#define VS_CTL_REG(n)		(0x00A1 + (n))
-/* page 1 */
-#define ISP_CTL_REG(n)		(0x0110 + (n))
-#define YOFS_REG		0x0119
-#define DARK_YOFS_REG		0x011A
-#define SAT_CTL_REG		0x0120
-#define BSAT_REG		0x0121
-#define RSAT_REG		0x0122
-/* Color correction */
-#define CMC_CTL_REG		0x0130
-#define CMC_OFSGH_REG		0x0133
-#define CMC_OFSGL_REG		0x0135
-#define CMC_SIGN_REG		0x0136
-#define CMC_GOFS_REG		0x0137
-#define CMC_COEF_REG(n)		(0x0138 + (n))
-#define CMC_OFS_REG(n)		(0x0141 + (n))
-/* Gamma correction */
-#define GMA_CTL_REG		0x0160
-#define GMA_COEF_REG(n)		(0x0161 + (n))
-/* Lens Shading */
-#define LENS_CTRL_REG		0x01D0
-#define LENS_XCEN_REG		0x01D1
-#define LENS_YCEN_REG		0x01D2
-#define LENS_RC_REG		0x01D3
-#define LENS_GC_REG		0x01D4
-#define LENS_BC_REG		0x01D5
-#define L_AGON_REG		0x01D6
-#define L_AGOFF_REG		0x01D7
-/* Page 3 - Auto Exposure */
-#define AE_CTL_REG(n)		(0x0310 + (n))
-#define AE_CTL9_REG		0x032C
-#define AE_CTL10_REG		0x032D
-#define AE_YLVL_REG		0x031C
-#define AE_YTH_REG(n)		(0x031D + (n))
-#define AE_WGT_REG		0x0326
-#define EXP_TIMEH_REG		0x0333
-#define EXP_TIMEM_REG		0x0334
-#define EXP_TIMEL_REG		0x0335
-#define EXP_MMINH_REG		0x0336
-#define EXP_MMINL_REG		0x0337
-#define EXP_MMAXH_REG		0x0338
-#define EXP_MMAXM_REG		0x0339
-#define EXP_MMAXL_REG		0x033A
-/* Page 4 - Auto White Balance */
-#define AWB_CTL_REG(n)		(0x0410 + (n))
-#define AWB_ENABE		0x80
-#define AWB_WGHT_REG		0x0419
-#define BGAIN_PAR_REG(n)	(0x044F + (n))
-/* Manual white balance, when AWB_CTL2[0]=1 */
-#define MWB_RGAIN_REG		0x0466
-#define MWB_BGAIN_REG		0x0467
-
-/* The token to mark an array end */
-#define REG_TERM		0xFFFF
-
-struct noon010_format {
-	enum v4l2_mbus_pixelcode code;
-	enum v4l2_colorspace colorspace;
-	u16 ispctl1_reg;
-};
-
-struct noon010_frmsize {
-	u16 width;
-	u16 height;
-	int vid_ctl1;
-};
-
-static const char * const noon010_supply_name[] = {
-	"vdd_core", "vddio", "vdda"
-};
-
-#define NOON010_NUM_SUPPLIES ARRAY_SIZE(noon010_supply_name)
-
-struct noon010_info {
-	struct v4l2_subdev sd;
-	struct media_pad pad;
-	struct v4l2_ctrl_handler hdl;
-	struct regulator_bulk_data supply[NOON010_NUM_SUPPLIES];
-	u32 gpio_nreset;
-	u32 gpio_nstby;
-
-	/* Protects the struct members below */
-	struct mutex lock;
-
-	const struct noon010_format *curr_fmt;
-	const struct noon010_frmsize *curr_win;
-	unsigned int apply_new_cfg:1;
-	unsigned int streaming:1;
-	unsigned int hflip:1;
-	unsigned int vflip:1;
-	unsigned int power:1;
-	u8 i2c_reg_page;
-};
-
-struct i2c_regval {
-	u16 addr;
-	u16 val;
-};
-
-/* Supported resolutions. */
-static const struct noon010_frmsize noon010_sizes[] = {
-	{
-		.width		= 352,
-		.height		= 288,
-		.vid_ctl1	= 0,
-	}, {
-		.width		= 176,
-		.height		= 144,
-		.vid_ctl1	= 0x10,
-	}, {
-		.width		= 88,
-		.height		= 72,
-		.vid_ctl1	= 0x20,
-	},
-};
-
-/* Supported pixel formats. */
-static const struct noon010_format noon010_formats[] = {
-	{
-		.code		= V4L2_MBUS_FMT_YUYV8_2X8,
-		.colorspace	= V4L2_COLORSPACE_JPEG,
-		.ispctl1_reg	= 0x03,
-	}, {
-		.code		= V4L2_MBUS_FMT_YVYU8_2X8,
-		.colorspace	= V4L2_COLORSPACE_JPEG,
-		.ispctl1_reg	= 0x02,
-	}, {
-		.code		= V4L2_MBUS_FMT_VYUY8_2X8,
-		.colorspace	= V4L2_COLORSPACE_JPEG,
-		.ispctl1_reg	= 0,
-	}, {
-		.code		= V4L2_MBUS_FMT_UYVY8_2X8,
-		.colorspace	= V4L2_COLORSPACE_JPEG,
-		.ispctl1_reg	= 0x01,
-	}, {
-		.code		= V4L2_MBUS_FMT_RGB565_2X8_BE,
-		.colorspace	= V4L2_COLORSPACE_JPEG,
-		.ispctl1_reg	= 0x40,
-	},
-};
-
-static const struct i2c_regval noon010_base_regs[] = {
-	{ WIN_COLL_REG,		0x06 },	{ HBLANKL_REG,		0x7C },
-	/* Color corection and saturation */
-	{ ISP_CTL_REG(0),	0x30 }, { ISP_CTL_REG(2),	0x30 },
-	{ YOFS_REG,		0x80 }, { DARK_YOFS_REG,	0x04 },
-	{ SAT_CTL_REG,		0x1F }, { BSAT_REG,		0x90 },
-	{ CMC_CTL_REG,		0x0F }, { CMC_OFSGH_REG,	0x3C },
-	{ CMC_OFSGL_REG,	0x2C }, { CMC_SIGN_REG,		0x3F },
-	{ CMC_COEF_REG(0),	0x79 }, { CMC_OFS_REG(0),	0x00 },
-	{ CMC_COEF_REG(1),	0x39 }, { CMC_OFS_REG(1),	0x00 },
-	{ CMC_COEF_REG(2),	0x00 }, { CMC_OFS_REG(2),	0x00 },
-	{ CMC_COEF_REG(3),	0x11 }, { CMC_OFS_REG(3),	0x8B },
-	{ CMC_COEF_REG(4),	0x65 }, { CMC_OFS_REG(4),	0x07 },
-	{ CMC_COEF_REG(5),	0x14 }, { CMC_OFS_REG(5),	0x04 },
-	{ CMC_COEF_REG(6),	0x01 }, { CMC_OFS_REG(6),	0x9C },
-	{ CMC_COEF_REG(7),	0x33 }, { CMC_OFS_REG(7),	0x89 },
-	{ CMC_COEF_REG(8),	0x74 }, { CMC_OFS_REG(8),	0x25 },
-	/* Automatic white balance */
-	{ AWB_CTL_REG(0),	0x78 }, { AWB_CTL_REG(1),	0x2E },
-	{ AWB_CTL_REG(2),	0x20 }, { AWB_CTL_REG(3),	0x85 },
-	/* Auto exposure */
-	{ AE_CTL_REG(0),	0xDC }, { AE_CTL_REG(1),	0x81 },
-	{ AE_CTL_REG(2),	0x30 }, { AE_CTL_REG(3),	0xA5 },
-	{ AE_CTL_REG(4),	0x40 }, { AE_CTL_REG(5),	0x51 },
-	{ AE_CTL_REG(6),	0x33 }, { AE_CTL_REG(7),	0x7E },
-	{ AE_CTL9_REG,		0x00 }, { AE_CTL10_REG,		0x02 },
-	{ AE_YLVL_REG,		0x44 },	{ AE_YTH_REG(0),	0x34 },
-	{ AE_YTH_REG(1),	0x30 },	{ AE_WGT_REG,		0xD5 },
-	/* Lens shading compensation */
-	{ LENS_CTRL_REG,	0x01 }, { LENS_XCEN_REG,	0x80 },
-	{ LENS_YCEN_REG,	0x70 }, { LENS_RC_REG,		0x53 },
-	{ LENS_GC_REG,		0x40 }, { LENS_BC_REG,		0x3E },
-	{ REG_TERM,		0 },
-};
-
-static inline struct noon010_info *to_noon010(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct noon010_info, sd);
-}
-
-static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
-{
-	return &container_of(ctrl->handler, struct noon010_info, hdl)->sd;
-}
-
-static inline int set_i2c_page(struct noon010_info *info,
-			       struct i2c_client *client, unsigned int reg)
-{
-	u32 page = reg >> 8 & 0xFF;
-	int ret = 0;
-
-	if (info->i2c_reg_page != page && (reg & 0xFF) != 0x03) {
-		ret = i2c_smbus_write_byte_data(client, PAGEMODE_REG, page);
-		if (!ret)
-			info->i2c_reg_page = page;
-	}
-	return ret;
-}
-
-static int cam_i2c_read(struct v4l2_subdev *sd, u32 reg_addr)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct noon010_info *info = to_noon010(sd);
-	int ret = set_i2c_page(info, client, reg_addr);
-
-	if (ret)
-		return ret;
-	return i2c_smbus_read_byte_data(client, reg_addr & 0xFF);
-}
-
-static int cam_i2c_write(struct v4l2_subdev *sd, u32 reg_addr, u32 val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct noon010_info *info = to_noon010(sd);
-	int ret = set_i2c_page(info, client, reg_addr);
-
-	if (ret)
-		return ret;
-	return i2c_smbus_write_byte_data(client, reg_addr & 0xFF, val);
-}
-
-static inline int noon010_bulk_write_reg(struct v4l2_subdev *sd,
-					 const struct i2c_regval *msg)
-{
-	while (msg->addr != REG_TERM) {
-		int ret = cam_i2c_write(sd, msg->addr, msg->val);
-
-		if (ret)
-			return ret;
-		msg++;
-	}
-	return 0;
-}
-
-/* Device reset and sleep mode control */
-static int noon010_power_ctrl(struct v4l2_subdev *sd, bool reset, bool sleep)
-{
-	struct noon010_info *info = to_noon010(sd);
-	u8 reg = sleep ? 0xF1 : 0xF0;
-	int ret = 0;
-
-	if (reset) {
-		ret = cam_i2c_write(sd, POWER_CTRL_REG, reg | 0x02);
-		udelay(20);
-	}
-	if (!ret) {
-		ret = cam_i2c_write(sd, POWER_CTRL_REG, reg);
-		if (reset && !ret)
-			info->i2c_reg_page = -1;
-	}
-	return ret;
-}
-
-/* Automatic white balance control */
-static int noon010_enable_autowhitebalance(struct v4l2_subdev *sd, int on)
-{
-	int ret;
-
-	ret = cam_i2c_write(sd, AWB_CTL_REG(1), on ? 0x2E : 0x2F);
-	if (!ret)
-		ret = cam_i2c_write(sd, AWB_CTL_REG(0), on ? 0xFB : 0x7B);
-	return ret;
-}
-
-/* Called with struct noon010_info.lock mutex held */
-static int noon010_set_flip(struct v4l2_subdev *sd, int hflip, int vflip)
-{
-	struct noon010_info *info = to_noon010(sd);
-	int reg, ret;
-
-	reg = cam_i2c_read(sd, VDO_CTL_REG(1));
-	if (reg < 0)
-		return reg;
-
-	reg &= 0x7C;
-	if (hflip)
-		reg |= 0x01;
-	if (vflip)
-		reg |= 0x02;
-
-	ret = cam_i2c_write(sd, VDO_CTL_REG(1), reg | 0x80);
-	if (!ret) {
-		info->hflip = hflip;
-		info->vflip = vflip;
-	}
-	return ret;
-}
-
-/* Configure resolution and color format */
-static int noon010_set_params(struct v4l2_subdev *sd)
-{
-	struct noon010_info *info = to_noon010(sd);
-
-	int ret = cam_i2c_write(sd, VDO_CTL_REG(0),
-				info->curr_win->vid_ctl1);
-	if (ret)
-		return ret;
-	return cam_i2c_write(sd, ISP_CTL_REG(0),
-			     info->curr_fmt->ispctl1_reg);
-}
-
-/* Find nearest matching image pixel size. */
-static int noon010_try_frame_size(struct v4l2_mbus_framefmt *mf,
-				  const struct noon010_frmsize **size)
-{
-	unsigned int min_err = ~0;
-	int i = ARRAY_SIZE(noon010_sizes);
-	const struct noon010_frmsize *fsize = &noon010_sizes[0],
-		*match = NULL;
-
-	while (i--) {
-		int err = abs(fsize->width - mf->width)
-				+ abs(fsize->height - mf->height);
-
-		if (err < min_err) {
-			min_err = err;
-			match = fsize;
-		}
-		fsize++;
-	}
-	if (match) {
-		mf->width  = match->width;
-		mf->height = match->height;
-		if (size)
-			*size = match;
-		return 0;
-	}
-	return -EINVAL;
-}
-
-/* Called with info.lock mutex held */
-static int power_enable(struct noon010_info *info)
-{
-	int ret;
-
-	if (info->power) {
-		v4l2_info(&info->sd, "%s: sensor is already on\n", __func__);
-		return 0;
-	}
-
-	if (gpio_is_valid(info->gpio_nstby))
-		gpio_set_value(info->gpio_nstby, 0);
-
-	if (gpio_is_valid(info->gpio_nreset))
-		gpio_set_value(info->gpio_nreset, 0);
-
-	ret = regulator_bulk_enable(NOON010_NUM_SUPPLIES, info->supply);
-	if (ret)
-		return ret;
-
-	if (gpio_is_valid(info->gpio_nreset)) {
-		msleep(50);
-		gpio_set_value(info->gpio_nreset, 1);
-	}
-	if (gpio_is_valid(info->gpio_nstby)) {
-		udelay(1000);
-		gpio_set_value(info->gpio_nstby, 1);
-	}
-	if (gpio_is_valid(info->gpio_nreset)) {
-		udelay(1000);
-		gpio_set_value(info->gpio_nreset, 0);
-		msleep(100);
-		gpio_set_value(info->gpio_nreset, 1);
-		msleep(20);
-	}
-	info->power = 1;
-
-	v4l2_dbg(1, debug, &info->sd,  "%s: sensor is on\n", __func__);
-	return 0;
-}
-
-/* Called with info.lock mutex held */
-static int power_disable(struct noon010_info *info)
-{
-	int ret;
-
-	if (!info->power) {
-		v4l2_info(&info->sd, "%s: sensor is already off\n", __func__);
-		return 0;
-	}
-
-	ret = regulator_bulk_disable(NOON010_NUM_SUPPLIES, info->supply);
-	if (ret)
-		return ret;
-
-	if (gpio_is_valid(info->gpio_nstby))
-		gpio_set_value(info->gpio_nstby, 0);
-
-	if (gpio_is_valid(info->gpio_nreset))
-		gpio_set_value(info->gpio_nreset, 0);
-
-	info->power = 0;
-
-	v4l2_dbg(1, debug, &info->sd,  "%s: sensor is off\n", __func__);
-
-	return 0;
-}
-
-static int noon010_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-	struct noon010_info *info = to_noon010(sd);
-	int ret = 0;
-
-	v4l2_dbg(1, debug, sd, "%s: ctrl_id: %d, value: %d\n",
-		 __func__, ctrl->id, ctrl->val);
-
-	mutex_lock(&info->lock);
-	/*
-	 * If the device is not powered up by the host driver do
-	 * not apply any controls to H/W at this time. Instead
-	 * the controls will be restored right after power-up.
-	 */
-	if (!info->power)
-		goto unlock;
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUTO_WHITE_BALANCE:
-		ret = noon010_enable_autowhitebalance(sd, ctrl->val);
-		break;
-	case V4L2_CID_BLUE_BALANCE:
-		ret = cam_i2c_write(sd, MWB_BGAIN_REG, ctrl->val);
-		break;
-	case V4L2_CID_RED_BALANCE:
-		ret =  cam_i2c_write(sd, MWB_RGAIN_REG, ctrl->val);
-		break;
-	default:
-		ret = -EINVAL;
-	}
-unlock:
-	mutex_unlock(&info->lock);
-	return ret;
-}
-
-static int noon010_enum_mbus_code(struct v4l2_subdev *sd,
-				  struct v4l2_subdev_fh *fh,
-				  struct v4l2_subdev_mbus_code_enum *code)
-{
-	if (code->index >= ARRAY_SIZE(noon010_formats))
-		return -EINVAL;
-
-	code->code = noon010_formats[code->index].code;
-	return 0;
-}
-
-static int noon010_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
-			   struct v4l2_subdev_format *fmt)
-{
-	struct noon010_info *info = to_noon010(sd);
-	struct v4l2_mbus_framefmt *mf;
-
-	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
-		if (fh) {
-			mf = v4l2_subdev_get_try_format(fh, 0);
-			fmt->format = *mf;
-		}
-		return 0;
-	}
-	mf = &fmt->format;
-
-	mutex_lock(&info->lock);
-	mf->width = info->curr_win->width;
-	mf->height = info->curr_win->height;
-	mf->code = info->curr_fmt->code;
-	mf->colorspace = info->curr_fmt->colorspace;
-	mf->field = V4L2_FIELD_NONE;
-
-	mutex_unlock(&info->lock);
-	return 0;
-}
-
-/* Return nearest media bus frame format. */
-static const struct noon010_format *noon010_try_fmt(struct v4l2_subdev *sd,
-					    struct v4l2_mbus_framefmt *mf)
-{
-	int i = ARRAY_SIZE(noon010_formats);
-
-	while (--i)
-		if (mf->code == noon010_formats[i].code)
-			break;
-	mf->code = noon010_formats[i].code;
-
-	return &noon010_formats[i];
-}
-
-static int noon010_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
-			   struct v4l2_subdev_format *fmt)
-{
-	struct noon010_info *info = to_noon010(sd);
-	const struct noon010_frmsize *size = NULL;
-	const struct noon010_format *nf;
-	struct v4l2_mbus_framefmt *mf;
-	int ret = 0;
-
-	nf = noon010_try_fmt(sd, &fmt->format);
-	noon010_try_frame_size(&fmt->format, &size);
-	fmt->format.colorspace = V4L2_COLORSPACE_JPEG;
-
-	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
-		if (fh) {
-			mf = v4l2_subdev_get_try_format(fh, 0);
-			*mf = fmt->format;
-		}
-		return 0;
-	}
-	mutex_lock(&info->lock);
-	if (!info->streaming) {
-		info->apply_new_cfg = 1;
-		info->curr_fmt = nf;
-		info->curr_win = size;
-	} else {
-		ret = -EBUSY;
-	}
-	mutex_unlock(&info->lock);
-	return ret;
-}
-
-/* Called with struct noon010_info.lock mutex held */
-static int noon010_base_config(struct v4l2_subdev *sd)
-{
-	int ret = noon010_bulk_write_reg(sd, noon010_base_regs);
-	if (!ret)
-		ret = noon010_set_params(sd);
-	if (!ret)
-		ret = noon010_set_flip(sd, 1, 0);
-
-	return ret;
-}
-
-static int noon010_s_power(struct v4l2_subdev *sd, int on)
-{
-	struct noon010_info *info = to_noon010(sd);
-	int ret;
-
-	mutex_lock(&info->lock);
-	if (on) {
-		ret = power_enable(info);
-		if (!ret)
-			ret = noon010_base_config(sd);
-	} else {
-		noon010_power_ctrl(sd, false, true);
-		ret = power_disable(info);
-	}
-	mutex_unlock(&info->lock);
-
-	/* Restore the controls state */
-	if (!ret && on)
-		ret = v4l2_ctrl_handler_setup(&info->hdl);
-
-	return ret;
-}
-
-static int noon010_s_stream(struct v4l2_subdev *sd, int on)
-{
-	struct noon010_info *info = to_noon010(sd);
-	int ret = 0;
-
-	mutex_lock(&info->lock);
-	if (!info->streaming != !on) {
-		ret = noon010_power_ctrl(sd, false, !on);
-		if (!ret)
-			info->streaming = on;
-	}
-	if (!ret && on && info->apply_new_cfg) {
-		ret = noon010_set_params(sd);
-		if (!ret)
-			info->apply_new_cfg = 0;
-	}
-	mutex_unlock(&info->lock);
-	return ret;
-}
-
-static int noon010_log_status(struct v4l2_subdev *sd)
-{
-	struct noon010_info *info = to_noon010(sd);
-
-	v4l2_ctrl_handler_log_status(&info->hdl, sd->name);
-	return 0;
-}
-
-static int noon010_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-{
-	struct v4l2_mbus_framefmt *mf = v4l2_subdev_get_try_format(fh, 0);
-
-	mf->width = noon010_sizes[0].width;
-	mf->height = noon010_sizes[0].height;
-	mf->code = noon010_formats[0].code;
-	mf->colorspace = V4L2_COLORSPACE_JPEG;
-	mf->field = V4L2_FIELD_NONE;
-	return 0;
-}
-
-static const struct v4l2_subdev_internal_ops noon010_subdev_internal_ops = {
-	.open = noon010_open,
-};
-
-static const struct v4l2_ctrl_ops noon010_ctrl_ops = {
-	.s_ctrl = noon010_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops noon010_core_ops = {
-	.s_power	= noon010_s_power,
-	.g_ctrl		= v4l2_subdev_g_ctrl,
-	.s_ctrl		= v4l2_subdev_s_ctrl,
-	.queryctrl	= v4l2_subdev_queryctrl,
-	.querymenu	= v4l2_subdev_querymenu,
-	.g_ext_ctrls	= v4l2_subdev_g_ext_ctrls,
-	.try_ext_ctrls	= v4l2_subdev_try_ext_ctrls,
-	.s_ext_ctrls	= v4l2_subdev_s_ext_ctrls,
-	.log_status	= noon010_log_status,
-};
-
-static struct v4l2_subdev_pad_ops noon010_pad_ops = {
-	.enum_mbus_code	= noon010_enum_mbus_code,
-	.get_fmt	= noon010_get_fmt,
-	.set_fmt	= noon010_set_fmt,
-};
-
-static struct v4l2_subdev_video_ops noon010_video_ops = {
-	.s_stream	= noon010_s_stream,
-};
-
-static const struct v4l2_subdev_ops noon010_ops = {
-	.core	= &noon010_core_ops,
-	.pad	= &noon010_pad_ops,
-	.video	= &noon010_video_ops,
-};
-
-/* Return 0 if NOON010PC30L sensor type was detected or -ENODEV otherwise. */
-static int noon010_detect(struct i2c_client *client, struct noon010_info *info)
-{
-	int ret;
-
-	ret = power_enable(info);
-	if (ret)
-		return ret;
-
-	ret = i2c_smbus_read_byte_data(client, DEVICE_ID_REG);
-	if (ret < 0)
-		dev_err(&client->dev, "I2C read failed: 0x%X\n", ret);
-
-	power_disable(info);
-
-	return ret == NOON010PC30_ID ? 0 : -ENODEV;
-}
-
-static int noon010_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
-{
-	struct noon010_info *info;
-	struct v4l2_subdev *sd;
-	const struct noon010pc30_platform_data *pdata
-		= client->dev.platform_data;
-	int ret;
-	int i;
-
-	if (!pdata) {
-		dev_err(&client->dev, "No platform data!\n");
-		return -EIO;
-	}
-
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
-	if (!info)
-		return -ENOMEM;
-
-	mutex_init(&info->lock);
-	sd = &info->sd;
-	v4l2_i2c_subdev_init(sd, client, &noon010_ops);
-	strlcpy(sd->name, MODULE_NAME, sizeof(sd->name));
-
-	sd->internal_ops = &noon010_subdev_internal_ops;
-	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
-
-	v4l2_ctrl_handler_init(&info->hdl, 3);
-
-	v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops,
-			  V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1);
-	v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops,
-			  V4L2_CID_RED_BALANCE, 0, 127, 1, 64);
-	v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops,
-			  V4L2_CID_BLUE_BALANCE, 0, 127, 1, 64);
-
-	sd->ctrl_handler = &info->hdl;
-
-	ret = info->hdl.error;
-	if (ret)
-		goto np_err;
-
-	info->i2c_reg_page	= -1;
-	info->gpio_nreset	= -EINVAL;
-	info->gpio_nstby	= -EINVAL;
-	info->curr_fmt		= &noon010_formats[0];
-	info->curr_win		= &noon010_sizes[0];
-
-	if (gpio_is_valid(pdata->gpio_nreset)) {
-		ret = gpio_request(pdata->gpio_nreset, "NOON010PC30 NRST");
-		if (ret) {
-			dev_err(&client->dev, "GPIO request error: %d\n", ret);
-			goto np_err;
-		}
-		info->gpio_nreset = pdata->gpio_nreset;
-		gpio_direction_output(info->gpio_nreset, 0);
-		gpio_export(info->gpio_nreset, 0);
-	}
-
-	if (gpio_is_valid(pdata->gpio_nstby)) {
-		ret = gpio_request(pdata->gpio_nstby, "NOON010PC30 NSTBY");
-		if (ret) {
-			dev_err(&client->dev, "GPIO request error: %d\n", ret);
-			goto np_gpio_err;
-		}
-		info->gpio_nstby = pdata->gpio_nstby;
-		gpio_direction_output(info->gpio_nstby, 0);
-		gpio_export(info->gpio_nstby, 0);
-	}
-
-	for (i = 0; i < NOON010_NUM_SUPPLIES; i++)
-		info->supply[i].supply = noon010_supply_name[i];
-
-	ret = regulator_bulk_get(&client->dev, NOON010_NUM_SUPPLIES,
-				 info->supply);
-	if (ret)
-		goto np_reg_err;
-
-	info->pad.flags = MEDIA_PAD_FL_SOURCE;
-	sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR;
-	ret = media_entity_init(&sd->entity, 1, &info->pad, 0);
-	if (ret < 0)
-		goto np_me_err;
-
-	ret = noon010_detect(client, info);
-	if (!ret)
-		return 0;
-
-np_me_err:
-	regulator_bulk_free(NOON010_NUM_SUPPLIES, info->supply);
-np_reg_err:
-	if (gpio_is_valid(info->gpio_nstby))
-		gpio_free(info->gpio_nstby);
-np_gpio_err:
-	if (gpio_is_valid(info->gpio_nreset))
-		gpio_free(info->gpio_nreset);
-np_err:
-	v4l2_ctrl_handler_free(&info->hdl);
-	v4l2_device_unregister_subdev(sd);
-	kfree(info);
-	return ret;
-}
-
-static int noon010_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct noon010_info *info = to_noon010(sd);
-
-	v4l2_device_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(&info->hdl);
-
-	regulator_bulk_free(NOON010_NUM_SUPPLIES, info->supply);
-
-	if (gpio_is_valid(info->gpio_nreset))
-		gpio_free(info->gpio_nreset);
-
-	if (gpio_is_valid(info->gpio_nstby))
-		gpio_free(info->gpio_nstby);
-
-	media_entity_cleanup(&sd->entity);
-	kfree(info);
-	return 0;
-}
-
-static const struct i2c_device_id noon010_id[] = {
-	{ MODULE_NAME, 0 },
-	{ },
-};
-MODULE_DEVICE_TABLE(i2c, noon010_id);
-
-
-static struct i2c_driver noon010_i2c_driver = {
-	.driver = {
-		.name = MODULE_NAME
-	},
-	.probe		= noon010_probe,
-	.remove		= noon010_remove,
-	.id_table	= noon010_id,
-};
-
-module_i2c_driver(noon010_i2c_driver);
-
-MODULE_DESCRIPTION("Siliconfile NOON010PC30 camera driver");
-MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/ov7670.c b/drivers/media/video/ov7670.c
deleted file mode 100644
index e7c82b2..0000000
--- a/drivers/media/video/ov7670.c
+++ /dev/null
@@ -1,1586 +0,0 @@
-/*
- * A V4L2 driver for OmniVision OV7670 cameras.
- *
- * Copyright 2006 One Laptop Per Child Association, Inc.  Written
- * by Jonathan Corbet with substantial inspiration from Mark
- * McClelland's ovcamchip code.
- *
- * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
- *
- * This file may be distributed under the terms of the GNU General
- * Public License, version 2.
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/delay.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-mediabus.h>
-#include <media/ov7670.h>
-
-MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
-MODULE_DESCRIPTION("A low-level driver for OmniVision ov7670 sensors");
-MODULE_LICENSE("GPL");
-
-static bool debug;
-module_param(debug, bool, 0644);
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
-
-/*
- * Basic window sizes.  These probably belong somewhere more globally
- * useful.
- */
-#define VGA_WIDTH	640
-#define VGA_HEIGHT	480
-#define QVGA_WIDTH	320
-#define QVGA_HEIGHT	240
-#define CIF_WIDTH	352
-#define CIF_HEIGHT	288
-#define QCIF_WIDTH	176
-#define	QCIF_HEIGHT	144
-
-/*
- * The 7670 sits on i2c with ID 0x42
- */
-#define OV7670_I2C_ADDR 0x42
-
-/* Registers */
-#define REG_GAIN	0x00	/* Gain lower 8 bits (rest in vref) */
-#define REG_BLUE	0x01	/* blue gain */
-#define REG_RED		0x02	/* red gain */
-#define REG_VREF	0x03	/* Pieces of GAIN, VSTART, VSTOP */
-#define REG_COM1	0x04	/* Control 1 */
-#define  COM1_CCIR656	  0x40  /* CCIR656 enable */
-#define REG_BAVE	0x05	/* U/B Average level */
-#define REG_GbAVE	0x06	/* Y/Gb Average level */
-#define REG_AECHH	0x07	/* AEC MS 5 bits */
-#define REG_RAVE	0x08	/* V/R Average level */
-#define REG_COM2	0x09	/* Control 2 */
-#define  COM2_SSLEEP	  0x10	/* Soft sleep mode */
-#define REG_PID		0x0a	/* Product ID MSB */
-#define REG_VER		0x0b	/* Product ID LSB */
-#define REG_COM3	0x0c	/* Control 3 */
-#define  COM3_SWAP	  0x40	  /* Byte swap */
-#define  COM3_SCALEEN	  0x08	  /* Enable scaling */
-#define  COM3_DCWEN	  0x04	  /* Enable downsamp/crop/window */
-#define REG_COM4	0x0d	/* Control 4 */
-#define REG_COM5	0x0e	/* All "reserved" */
-#define REG_COM6	0x0f	/* Control 6 */
-#define REG_AECH	0x10	/* More bits of AEC value */
-#define REG_CLKRC	0x11	/* Clocl control */
-#define   CLK_EXT	  0x40	  /* Use external clock directly */
-#define   CLK_SCALE	  0x3f	  /* Mask for internal clock scale */
-#define REG_COM7	0x12	/* Control 7 */
-#define   COM7_RESET	  0x80	  /* Register reset */
-#define   COM7_FMT_MASK	  0x38
-#define   COM7_FMT_VGA	  0x00
-#define	  COM7_FMT_CIF	  0x20	  /* CIF format */
-#define   COM7_FMT_QVGA	  0x10	  /* QVGA format */
-#define   COM7_FMT_QCIF	  0x08	  /* QCIF format */
-#define	  COM7_RGB	  0x04	  /* bits 0 and 2 - RGB format */
-#define	  COM7_YUV	  0x00	  /* YUV */
-#define	  COM7_BAYER	  0x01	  /* Bayer format */
-#define	  COM7_PBAYER	  0x05	  /* "Processed bayer" */
-#define REG_COM8	0x13	/* Control 8 */
-#define   COM8_FASTAEC	  0x80	  /* Enable fast AGC/AEC */
-#define   COM8_AECSTEP	  0x40	  /* Unlimited AEC step size */
-#define   COM8_BFILT	  0x20	  /* Band filter enable */
-#define   COM8_AGC	  0x04	  /* Auto gain enable */
-#define   COM8_AWB	  0x02	  /* White balance enable */
-#define   COM8_AEC	  0x01	  /* Auto exposure enable */
-#define REG_COM9	0x14	/* Control 9  - gain ceiling */
-#define REG_COM10	0x15	/* Control 10 */
-#define   COM10_HSYNC	  0x40	  /* HSYNC instead of HREF */
-#define   COM10_PCLK_HB	  0x20	  /* Suppress PCLK on horiz blank */
-#define   COM10_HREF_REV  0x08	  /* Reverse HREF */
-#define   COM10_VS_LEAD	  0x04	  /* VSYNC on clock leading edge */
-#define   COM10_VS_NEG	  0x02	  /* VSYNC negative */
-#define   COM10_HS_NEG	  0x01	  /* HSYNC negative */
-#define REG_HSTART	0x17	/* Horiz start high bits */
-#define REG_HSTOP	0x18	/* Horiz stop high bits */
-#define REG_VSTART	0x19	/* Vert start high bits */
-#define REG_VSTOP	0x1a	/* Vert stop high bits */
-#define REG_PSHFT	0x1b	/* Pixel delay after HREF */
-#define REG_MIDH	0x1c	/* Manuf. ID high */
-#define REG_MIDL	0x1d	/* Manuf. ID low */
-#define REG_MVFP	0x1e	/* Mirror / vflip */
-#define   MVFP_MIRROR	  0x20	  /* Mirror image */
-#define   MVFP_FLIP	  0x10	  /* Vertical flip */
-
-#define REG_AEW		0x24	/* AGC upper limit */
-#define REG_AEB		0x25	/* AGC lower limit */
-#define REG_VPT		0x26	/* AGC/AEC fast mode op region */
-#define REG_HSYST	0x30	/* HSYNC rising edge delay */
-#define REG_HSYEN	0x31	/* HSYNC falling edge delay */
-#define REG_HREF	0x32	/* HREF pieces */
-#define REG_TSLB	0x3a	/* lots of stuff */
-#define   TSLB_YLAST	  0x04	  /* UYVY or VYUY - see com13 */
-#define REG_COM11	0x3b	/* Control 11 */
-#define   COM11_NIGHT	  0x80	  /* NIght mode enable */
-#define   COM11_NMFR	  0x60	  /* Two bit NM frame rate */
-#define   COM11_HZAUTO	  0x10	  /* Auto detect 50/60 Hz */
-#define	  COM11_50HZ	  0x08	  /* Manual 50Hz select */
-#define   COM11_EXP	  0x02
-#define REG_COM12	0x3c	/* Control 12 */
-#define   COM12_HREF	  0x80	  /* HREF always */
-#define REG_COM13	0x3d	/* Control 13 */
-#define   COM13_GAMMA	  0x80	  /* Gamma enable */
-#define	  COM13_UVSAT	  0x40	  /* UV saturation auto adjustment */
-#define   COM13_UVSWAP	  0x01	  /* V before U - w/TSLB */
-#define REG_COM14	0x3e	/* Control 14 */
-#define   COM14_DCWEN	  0x10	  /* DCW/PCLK-scale enable */
-#define REG_EDGE	0x3f	/* Edge enhancement factor */
-#define REG_COM15	0x40	/* Control 15 */
-#define   COM15_R10F0	  0x00	  /* Data range 10 to F0 */
-#define	  COM15_R01FE	  0x80	  /*            01 to FE */
-#define   COM15_R00FF	  0xc0	  /*            00 to FF */
-#define   COM15_RGB565	  0x10	  /* RGB565 output */
-#define   COM15_RGB555	  0x30	  /* RGB555 output */
-#define REG_COM16	0x41	/* Control 16 */
-#define   COM16_AWBGAIN   0x08	  /* AWB gain enable */
-#define REG_COM17	0x42	/* Control 17 */
-#define   COM17_AECWIN	  0xc0	  /* AEC window - must match COM4 */
-#define   COM17_CBAR	  0x08	  /* DSP Color bar */
-
-/*
- * This matrix defines how the colors are generated, must be
- * tweaked to adjust hue and saturation.
- *
- * Order: v-red, v-green, v-blue, u-red, u-green, u-blue
- *
- * They are nine-bit signed quantities, with the sign bit
- * stored in 0x58.  Sign for v-red is bit 0, and up from there.
- */
-#define	REG_CMATRIX_BASE 0x4f
-#define   CMATRIX_LEN 6
-#define REG_CMATRIX_SIGN 0x58
-
-
-#define REG_BRIGHT	0x55	/* Brightness */
-#define REG_CONTRAS	0x56	/* Contrast control */
-
-#define REG_GFIX	0x69	/* Fix gain control */
-
-#define REG_REG76	0x76	/* OV's name */
-#define   R76_BLKPCOR	  0x80	  /* Black pixel correction enable */
-#define   R76_WHTPCOR	  0x40	  /* White pixel correction enable */
-
-#define REG_RGB444	0x8c	/* RGB 444 control */
-#define   R444_ENABLE	  0x02	  /* Turn on RGB444, overrides 5x5 */
-#define   R444_RGBX	  0x01	  /* Empty nibble at end */
-
-#define REG_HAECC1	0x9f	/* Hist AEC/AGC control 1 */
-#define REG_HAECC2	0xa0	/* Hist AEC/AGC control 2 */
-
-#define REG_BD50MAX	0xa5	/* 50hz banding step limit */
-#define REG_HAECC3	0xa6	/* Hist AEC/AGC control 3 */
-#define REG_HAECC4	0xa7	/* Hist AEC/AGC control 4 */
-#define REG_HAECC5	0xa8	/* Hist AEC/AGC control 5 */
-#define REG_HAECC6	0xa9	/* Hist AEC/AGC control 6 */
-#define REG_HAECC7	0xaa	/* Hist AEC/AGC control 7 */
-#define REG_BD60MAX	0xab	/* 60hz banding step limit */
-
-
-/*
- * Information we maintain about a known sensor.
- */
-struct ov7670_format_struct;  /* coming later */
-struct ov7670_info {
-	struct v4l2_subdev sd;
-	struct ov7670_format_struct *fmt;  /* Current format */
-	unsigned char sat;		/* Saturation value */
-	int hue;			/* Hue value */
-	int min_width;			/* Filter out smaller sizes */
-	int min_height;			/* Filter out smaller sizes */
-	int clock_speed;		/* External clock speed (MHz) */
-	u8 clkrc;			/* Clock divider value */
-	bool use_smbus;			/* Use smbus I/O instead of I2C */
-};
-
-static inline struct ov7670_info *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct ov7670_info, sd);
-}
-
-
-
-/*
- * The default register settings, as obtained from OmniVision.  There
- * is really no making sense of most of these - lots of "reserved" values
- * and such.
- *
- * These settings give VGA YUYV.
- */
-
-struct regval_list {
-	unsigned char reg_num;
-	unsigned char value;
-};
-
-static struct regval_list ov7670_default_regs[] = {
-	{ REG_COM7, COM7_RESET },
-/*
- * Clock scale: 3 = 15fps
- *              2 = 20fps
- *              1 = 30fps
- */
-	{ REG_CLKRC, 0x1 },	/* OV: clock scale (30 fps) */
-	{ REG_TSLB,  0x04 },	/* OV */
-	{ REG_COM7, 0 },	/* VGA */
-	/*
-	 * Set the hardware window.  These values from OV don't entirely
-	 * make sense - hstop is less than hstart.  But they work...
-	 */
-	{ REG_HSTART, 0x13 },	{ REG_HSTOP, 0x01 },
-	{ REG_HREF, 0xb6 },	{ REG_VSTART, 0x02 },
-	{ REG_VSTOP, 0x7a },	{ REG_VREF, 0x0a },
-
-	{ REG_COM3, 0 },	{ REG_COM14, 0 },
-	/* Mystery scaling numbers */
-	{ 0x70, 0x3a },		{ 0x71, 0x35 },
-	{ 0x72, 0x11 },		{ 0x73, 0xf0 },
-	{ 0xa2, 0x02 },		{ REG_COM10, 0x0 },
-
-	/* Gamma curve values */
-	{ 0x7a, 0x20 },		{ 0x7b, 0x10 },
-	{ 0x7c, 0x1e },		{ 0x7d, 0x35 },
-	{ 0x7e, 0x5a },		{ 0x7f, 0x69 },
-	{ 0x80, 0x76 },		{ 0x81, 0x80 },
-	{ 0x82, 0x88 },		{ 0x83, 0x8f },
-	{ 0x84, 0x96 },		{ 0x85, 0xa3 },
-	{ 0x86, 0xaf },		{ 0x87, 0xc4 },
-	{ 0x88, 0xd7 },		{ 0x89, 0xe8 },
-
-	/* AGC and AEC parameters.  Note we start by disabling those features,
-	   then turn them only after tweaking the values. */
-	{ REG_COM8, COM8_FASTAEC | COM8_AECSTEP | COM8_BFILT },
-	{ REG_GAIN, 0 },	{ REG_AECH, 0 },
-	{ REG_COM4, 0x40 }, /* magic reserved bit */
-	{ REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */
-	{ REG_BD50MAX, 0x05 },	{ REG_BD60MAX, 0x07 },
-	{ REG_AEW, 0x95 },	{ REG_AEB, 0x33 },
-	{ REG_VPT, 0xe3 },	{ REG_HAECC1, 0x78 },
-	{ REG_HAECC2, 0x68 },	{ 0xa1, 0x03 }, /* magic */
-	{ REG_HAECC3, 0xd8 },	{ REG_HAECC4, 0xd8 },
-	{ REG_HAECC5, 0xf0 },	{ REG_HAECC6, 0x90 },
-	{ REG_HAECC7, 0x94 },
-	{ REG_COM8, COM8_FASTAEC|COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC },
-
-	/* Almost all of these are magic "reserved" values.  */
-	{ REG_COM5, 0x61 },	{ REG_COM6, 0x4b },
-	{ 0x16, 0x02 },		{ REG_MVFP, 0x07 },
-	{ 0x21, 0x02 },		{ 0x22, 0x91 },
-	{ 0x29, 0x07 },		{ 0x33, 0x0b },
-	{ 0x35, 0x0b },		{ 0x37, 0x1d },
-	{ 0x38, 0x71 },		{ 0x39, 0x2a },
-	{ REG_COM12, 0x78 },	{ 0x4d, 0x40 },
-	{ 0x4e, 0x20 },		{ REG_GFIX, 0 },
-	{ 0x6b, 0x4a },		{ 0x74, 0x10 },
-	{ 0x8d, 0x4f },		{ 0x8e, 0 },
-	{ 0x8f, 0 },		{ 0x90, 0 },
-	{ 0x91, 0 },		{ 0x96, 0 },
-	{ 0x9a, 0 },		{ 0xb0, 0x84 },
-	{ 0xb1, 0x0c },		{ 0xb2, 0x0e },
-	{ 0xb3, 0x82 },		{ 0xb8, 0x0a },
-
-	/* More reserved magic, some of which tweaks white balance */
-	{ 0x43, 0x0a },		{ 0x44, 0xf0 },
-	{ 0x45, 0x34 },		{ 0x46, 0x58 },
-	{ 0x47, 0x28 },		{ 0x48, 0x3a },
-	{ 0x59, 0x88 },		{ 0x5a, 0x88 },
-	{ 0x5b, 0x44 },		{ 0x5c, 0x67 },
-	{ 0x5d, 0x49 },		{ 0x5e, 0x0e },
-	{ 0x6c, 0x0a },		{ 0x6d, 0x55 },
-	{ 0x6e, 0x11 },		{ 0x6f, 0x9f }, /* "9e for advance AWB" */
-	{ 0x6a, 0x40 },		{ REG_BLUE, 0x40 },
-	{ REG_RED, 0x60 },
-	{ REG_COM8, COM8_FASTAEC|COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC|COM8_AWB },
-
-	/* Matrix coefficients */
-	{ 0x4f, 0x80 },		{ 0x50, 0x80 },
-	{ 0x51, 0 },		{ 0x52, 0x22 },
-	{ 0x53, 0x5e },		{ 0x54, 0x80 },
-	{ 0x58, 0x9e },
-
-	{ REG_COM16, COM16_AWBGAIN },	{ REG_EDGE, 0 },
-	{ 0x75, 0x05 },		{ 0x76, 0xe1 },
-	{ 0x4c, 0 },		{ 0x77, 0x01 },
-	{ REG_COM13, 0xc3 },	{ 0x4b, 0x09 },
-	{ 0xc9, 0x60 },		{ REG_COM16, 0x38 },
-	{ 0x56, 0x40 },
-
-	{ 0x34, 0x11 },		{ REG_COM11, COM11_EXP|COM11_HZAUTO },
-	{ 0xa4, 0x88 },		{ 0x96, 0 },
-	{ 0x97, 0x30 },		{ 0x98, 0x20 },
-	{ 0x99, 0x30 },		{ 0x9a, 0x84 },
-	{ 0x9b, 0x29 },		{ 0x9c, 0x03 },
-	{ 0x9d, 0x4c },		{ 0x9e, 0x3f },
-	{ 0x78, 0x04 },
-
-	/* Extra-weird stuff.  Some sort of multiplexor register */
-	{ 0x79, 0x01 },		{ 0xc8, 0xf0 },
-	{ 0x79, 0x0f },		{ 0xc8, 0x00 },
-	{ 0x79, 0x10 },		{ 0xc8, 0x7e },
-	{ 0x79, 0x0a },		{ 0xc8, 0x80 },
-	{ 0x79, 0x0b },		{ 0xc8, 0x01 },
-	{ 0x79, 0x0c },		{ 0xc8, 0x0f },
-	{ 0x79, 0x0d },		{ 0xc8, 0x20 },
-	{ 0x79, 0x09 },		{ 0xc8, 0x80 },
-	{ 0x79, 0x02 },		{ 0xc8, 0xc0 },
-	{ 0x79, 0x03 },		{ 0xc8, 0x40 },
-	{ 0x79, 0x05 },		{ 0xc8, 0x30 },
-	{ 0x79, 0x26 },
-
-	{ 0xff, 0xff },	/* END MARKER */
-};
-
-
-/*
- * Here we'll try to encapsulate the changes for just the output
- * video format.
- *
- * RGB656 and YUV422 come from OV; RGB444 is homebrewed.
- *
- * IMPORTANT RULE: the first entry must be for COM7, see ov7670_s_fmt for why.
- */
-
-
-static struct regval_list ov7670_fmt_yuv422[] = {
-	{ REG_COM7, 0x0 },  /* Selects YUV mode */
-	{ REG_RGB444, 0 },	/* No RGB444 please */
-	{ REG_COM1, 0 },	/* CCIR601 */
-	{ REG_COM15, COM15_R00FF },
-	{ REG_COM9, 0x18 }, /* 4x gain ceiling; 0x8 is reserved bit */
-	{ 0x4f, 0x80 }, 	/* "matrix coefficient 1" */
-	{ 0x50, 0x80 }, 	/* "matrix coefficient 2" */
-	{ 0x51, 0    },		/* vb */
-	{ 0x52, 0x22 }, 	/* "matrix coefficient 4" */
-	{ 0x53, 0x5e }, 	/* "matrix coefficient 5" */
-	{ 0x54, 0x80 }, 	/* "matrix coefficient 6" */
-	{ REG_COM13, COM13_GAMMA|COM13_UVSAT },
-	{ 0xff, 0xff },
-};
-
-static struct regval_list ov7670_fmt_rgb565[] = {
-	{ REG_COM7, COM7_RGB },	/* Selects RGB mode */
-	{ REG_RGB444, 0 },	/* No RGB444 please */
-	{ REG_COM1, 0x0 },	/* CCIR601 */
-	{ REG_COM15, COM15_RGB565 },
-	{ REG_COM9, 0x38 }, 	/* 16x gain ceiling; 0x8 is reserved bit */
-	{ 0x4f, 0xb3 }, 	/* "matrix coefficient 1" */
-	{ 0x50, 0xb3 }, 	/* "matrix coefficient 2" */
-	{ 0x51, 0    },		/* vb */
-	{ 0x52, 0x3d }, 	/* "matrix coefficient 4" */
-	{ 0x53, 0xa7 }, 	/* "matrix coefficient 5" */
-	{ 0x54, 0xe4 }, 	/* "matrix coefficient 6" */
-	{ REG_COM13, COM13_GAMMA|COM13_UVSAT },
-	{ 0xff, 0xff },
-};
-
-static struct regval_list ov7670_fmt_rgb444[] = {
-	{ REG_COM7, COM7_RGB },	/* Selects RGB mode */
-	{ REG_RGB444, R444_ENABLE },	/* Enable xxxxrrrr ggggbbbb */
-	{ REG_COM1, 0x0 },	/* CCIR601 */
-	{ REG_COM15, COM15_R01FE|COM15_RGB565 }, /* Data range needed? */
-	{ REG_COM9, 0x38 }, 	/* 16x gain ceiling; 0x8 is reserved bit */
-	{ 0x4f, 0xb3 }, 	/* "matrix coefficient 1" */
-	{ 0x50, 0xb3 }, 	/* "matrix coefficient 2" */
-	{ 0x51, 0    },		/* vb */
-	{ 0x52, 0x3d }, 	/* "matrix coefficient 4" */
-	{ 0x53, 0xa7 }, 	/* "matrix coefficient 5" */
-	{ 0x54, 0xe4 }, 	/* "matrix coefficient 6" */
-	{ REG_COM13, COM13_GAMMA|COM13_UVSAT|0x2 },  /* Magic rsvd bit */
-	{ 0xff, 0xff },
-};
-
-static struct regval_list ov7670_fmt_raw[] = {
-	{ REG_COM7, COM7_BAYER },
-	{ REG_COM13, 0x08 }, /* No gamma, magic rsvd bit */
-	{ REG_COM16, 0x3d }, /* Edge enhancement, denoise */
-	{ REG_REG76, 0xe1 }, /* Pix correction, magic rsvd */
-	{ 0xff, 0xff },
-};
-
-
-
-/*
- * Low-level register I/O.
- *
- * Note that there are two versions of these.  On the XO 1, the
- * i2c controller only does SMBUS, so that's what we use.  The
- * ov7670 is not really an SMBUS device, though, so the communication
- * is not always entirely reliable.
- */
-static int ov7670_read_smbus(struct v4l2_subdev *sd, unsigned char reg,
-		unsigned char *value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	int ret;
-
-	ret = i2c_smbus_read_byte_data(client, reg);
-	if (ret >= 0) {
-		*value = (unsigned char)ret;
-		ret = 0;
-	}
-	return ret;
-}
-
-
-static int ov7670_write_smbus(struct v4l2_subdev *sd, unsigned char reg,
-		unsigned char value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	int ret = i2c_smbus_write_byte_data(client, reg, value);
-
-	if (reg == REG_COM7 && (value & COM7_RESET))
-		msleep(5);  /* Wait for reset to run */
-	return ret;
-}
-
-/*
- * On most platforms, we'd rather do straight i2c I/O.
- */
-static int ov7670_read_i2c(struct v4l2_subdev *sd, unsigned char reg,
-		unsigned char *value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u8 data = reg;
-	struct i2c_msg msg;
-	int ret;
-
-	/*
-	 * Send out the register address...
-	 */
-	msg.addr = client->addr;
-	msg.flags = 0;
-	msg.len = 1;
-	msg.buf = &data;
-	ret = i2c_transfer(client->adapter, &msg, 1);
-	if (ret < 0) {
-		printk(KERN_ERR "Error %d on register write\n", ret);
-		return ret;
-	}
-	/*
-	 * ...then read back the result.
-	 */
-	msg.flags = I2C_M_RD;
-	ret = i2c_transfer(client->adapter, &msg, 1);
-	if (ret >= 0) {
-		*value = data;
-		ret = 0;
-	}
-	return ret;
-}
-
-
-static int ov7670_write_i2c(struct v4l2_subdev *sd, unsigned char reg,
-		unsigned char value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct i2c_msg msg;
-	unsigned char data[2] = { reg, value };
-	int ret;
-
-	msg.addr = client->addr;
-	msg.flags = 0;
-	msg.len = 2;
-	msg.buf = data;
-	ret = i2c_transfer(client->adapter, &msg, 1);
-	if (ret > 0)
-		ret = 0;
-	if (reg == REG_COM7 && (value & COM7_RESET))
-		msleep(5);  /* Wait for reset to run */
-	return ret;
-}
-
-static int ov7670_read(struct v4l2_subdev *sd, unsigned char reg,
-		unsigned char *value)
-{
-	struct ov7670_info *info = to_state(sd);
-	if (info->use_smbus)
-		return ov7670_read_smbus(sd, reg, value);
-	else
-		return ov7670_read_i2c(sd, reg, value);
-}
-
-static int ov7670_write(struct v4l2_subdev *sd, unsigned char reg,
-		unsigned char value)
-{
-	struct ov7670_info *info = to_state(sd);
-	if (info->use_smbus)
-		return ov7670_write_smbus(sd, reg, value);
-	else
-		return ov7670_write_i2c(sd, reg, value);
-}
-
-/*
- * Write a list of register settings; ff/ff stops the process.
- */
-static int ov7670_write_array(struct v4l2_subdev *sd, struct regval_list *vals)
-{
-	while (vals->reg_num != 0xff || vals->value != 0xff) {
-		int ret = ov7670_write(sd, vals->reg_num, vals->value);
-		if (ret < 0)
-			return ret;
-		vals++;
-	}
-	return 0;
-}
-
-
-/*
- * Stuff that knows about the sensor.
- */
-static int ov7670_reset(struct v4l2_subdev *sd, u32 val)
-{
-	ov7670_write(sd, REG_COM7, COM7_RESET);
-	msleep(1);
-	return 0;
-}
-
-
-static int ov7670_init(struct v4l2_subdev *sd, u32 val)
-{
-	return ov7670_write_array(sd, ov7670_default_regs);
-}
-
-
-
-static int ov7670_detect(struct v4l2_subdev *sd)
-{
-	unsigned char v;
-	int ret;
-
-	ret = ov7670_init(sd, 0);
-	if (ret < 0)
-		return ret;
-	ret = ov7670_read(sd, REG_MIDH, &v);
-	if (ret < 0)
-		return ret;
-	if (v != 0x7f) /* OV manuf. id. */
-		return -ENODEV;
-	ret = ov7670_read(sd, REG_MIDL, &v);
-	if (ret < 0)
-		return ret;
-	if (v != 0xa2)
-		return -ENODEV;
-	/*
-	 * OK, we know we have an OmniVision chip...but which one?
-	 */
-	ret = ov7670_read(sd, REG_PID, &v);
-	if (ret < 0)
-		return ret;
-	if (v != 0x76)  /* PID + VER = 0x76 / 0x73 */
-		return -ENODEV;
-	ret = ov7670_read(sd, REG_VER, &v);
-	if (ret < 0)
-		return ret;
-	if (v != 0x73)  /* PID + VER = 0x76 / 0x73 */
-		return -ENODEV;
-	return 0;
-}
-
-
-/*
- * Store information about the video data format.  The color matrix
- * is deeply tied into the format, so keep the relevant values here.
- * The magic matrix numbers come from OmniVision.
- */
-static struct ov7670_format_struct {
-	enum v4l2_mbus_pixelcode mbus_code;
-	enum v4l2_colorspace colorspace;
-	struct regval_list *regs;
-	int cmatrix[CMATRIX_LEN];
-} ov7670_formats[] = {
-	{
-		.mbus_code	= V4L2_MBUS_FMT_YUYV8_2X8,
-		.colorspace	= V4L2_COLORSPACE_JPEG,
-		.regs 		= ov7670_fmt_yuv422,
-		.cmatrix	= { 128, -128, 0, -34, -94, 128 },
-	},
-	{
-		.mbus_code	= V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE,
-		.colorspace	= V4L2_COLORSPACE_SRGB,
-		.regs		= ov7670_fmt_rgb444,
-		.cmatrix	= { 179, -179, 0, -61, -176, 228 },
-	},
-	{
-		.mbus_code	= V4L2_MBUS_FMT_RGB565_2X8_LE,
-		.colorspace	= V4L2_COLORSPACE_SRGB,
-		.regs		= ov7670_fmt_rgb565,
-		.cmatrix	= { 179, -179, 0, -61, -176, 228 },
-	},
-	{
-		.mbus_code	= V4L2_MBUS_FMT_SBGGR8_1X8,
-		.colorspace	= V4L2_COLORSPACE_SRGB,
-		.regs 		= ov7670_fmt_raw,
-		.cmatrix	= { 0, 0, 0, 0, 0, 0 },
-	},
-};
-#define N_OV7670_FMTS ARRAY_SIZE(ov7670_formats)
-
-
-/*
- * Then there is the issue of window sizes.  Try to capture the info here.
- */
-
-/*
- * QCIF mode is done (by OV) in a very strange way - it actually looks like
- * VGA with weird scaling options - they do *not* use the canned QCIF mode
- * which is allegedly provided by the sensor.  So here's the weird register
- * settings.
- */
-static struct regval_list ov7670_qcif_regs[] = {
-	{ REG_COM3, COM3_SCALEEN|COM3_DCWEN },
-	{ REG_COM3, COM3_DCWEN },
-	{ REG_COM14, COM14_DCWEN | 0x01},
-	{ 0x73, 0xf1 },
-	{ 0xa2, 0x52 },
-	{ 0x7b, 0x1c },
-	{ 0x7c, 0x28 },
-	{ 0x7d, 0x3c },
-	{ 0x7f, 0x69 },
-	{ REG_COM9, 0x38 },
-	{ 0xa1, 0x0b },
-	{ 0x74, 0x19 },
-	{ 0x9a, 0x80 },
-	{ 0x43, 0x14 },
-	{ REG_COM13, 0xc0 },
-	{ 0xff, 0xff },
-};
-
-static struct ov7670_win_size {
-	int	width;
-	int	height;
-	unsigned char com7_bit;
-	int	hstart;		/* Start/stop values for the camera.  Note */
-	int	hstop;		/* that they do not always make complete */
-	int	vstart;		/* sense to humans, but evidently the sensor */
-	int	vstop;		/* will do the right thing... */
-	struct regval_list *regs; /* Regs to tweak */
-/* h/vref stuff */
-} ov7670_win_sizes[] = {
-	/* VGA */
-	{
-		.width		= VGA_WIDTH,
-		.height		= VGA_HEIGHT,
-		.com7_bit	= COM7_FMT_VGA,
-		.hstart		= 158,		/* These values from */
-		.hstop		=  14,		/* Omnivision */
-		.vstart		=  10,
-		.vstop		= 490,
-		.regs 		= NULL,
-	},
-	/* CIF */
-	{
-		.width		= CIF_WIDTH,
-		.height		= CIF_HEIGHT,
-		.com7_bit	= COM7_FMT_CIF,
-		.hstart		= 170,		/* Empirically determined */
-		.hstop		=  90,
-		.vstart		=  14,
-		.vstop		= 494,
-		.regs 		= NULL,
-	},
-	/* QVGA */
-	{
-		.width		= QVGA_WIDTH,
-		.height		= QVGA_HEIGHT,
-		.com7_bit	= COM7_FMT_QVGA,
-		.hstart		= 168,		/* Empirically determined */
-		.hstop		=  24,
-		.vstart		=  12,
-		.vstop		= 492,
-		.regs 		= NULL,
-	},
-	/* QCIF */
-	{
-		.width		= QCIF_WIDTH,
-		.height		= QCIF_HEIGHT,
-		.com7_bit	= COM7_FMT_VGA, /* see comment above */
-		.hstart		= 456,		/* Empirically determined */
-		.hstop		=  24,
-		.vstart		=  14,
-		.vstop		= 494,
-		.regs 		= ov7670_qcif_regs,
-	},
-};
-
-#define N_WIN_SIZES (ARRAY_SIZE(ov7670_win_sizes))
-
-
-/*
- * Store a set of start/stop values into the camera.
- */
-static int ov7670_set_hw(struct v4l2_subdev *sd, int hstart, int hstop,
-		int vstart, int vstop)
-{
-	int ret;
-	unsigned char v;
-/*
- * Horizontal: 11 bits, top 8 live in hstart and hstop.  Bottom 3 of
- * hstart are in href[2:0], bottom 3 of hstop in href[5:3].  There is
- * a mystery "edge offset" value in the top two bits of href.
- */
-	ret =  ov7670_write(sd, REG_HSTART, (hstart >> 3) & 0xff);
-	ret += ov7670_write(sd, REG_HSTOP, (hstop >> 3) & 0xff);
-	ret += ov7670_read(sd, REG_HREF, &v);
-	v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x7);
-	msleep(10);
-	ret += ov7670_write(sd, REG_HREF, v);
-/*
- * Vertical: similar arrangement, but only 10 bits.
- */
-	ret += ov7670_write(sd, REG_VSTART, (vstart >> 2) & 0xff);
-	ret += ov7670_write(sd, REG_VSTOP, (vstop >> 2) & 0xff);
-	ret += ov7670_read(sd, REG_VREF, &v);
-	v = (v & 0xf0) | ((vstop & 0x3) << 2) | (vstart & 0x3);
-	msleep(10);
-	ret += ov7670_write(sd, REG_VREF, v);
-	return ret;
-}
-
-
-static int ov7670_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
-					enum v4l2_mbus_pixelcode *code)
-{
-	if (index >= N_OV7670_FMTS)
-		return -EINVAL;
-
-	*code = ov7670_formats[index].mbus_code;
-	return 0;
-}
-
-static int ov7670_try_fmt_internal(struct v4l2_subdev *sd,
-		struct v4l2_mbus_framefmt *fmt,
-		struct ov7670_format_struct **ret_fmt,
-		struct ov7670_win_size **ret_wsize)
-{
-	int index;
-	struct ov7670_win_size *wsize;
-
-	for (index = 0; index < N_OV7670_FMTS; index++)
-		if (ov7670_formats[index].mbus_code == fmt->code)
-			break;
-	if (index >= N_OV7670_FMTS) {
-		/* default to first format */
-		index = 0;
-		fmt->code = ov7670_formats[0].mbus_code;
-	}
-	if (ret_fmt != NULL)
-		*ret_fmt = ov7670_formats + index;
-	/*
-	 * Fields: the OV devices claim to be progressive.
-	 */
-	fmt->field = V4L2_FIELD_NONE;
-	/*
-	 * Round requested image size down to the nearest
-	 * we support, but not below the smallest.
-	 */
-	for (wsize = ov7670_win_sizes; wsize < ov7670_win_sizes + N_WIN_SIZES;
-	     wsize++)
-		if (fmt->width >= wsize->width && fmt->height >= wsize->height)
-			break;
-	if (wsize >= ov7670_win_sizes + N_WIN_SIZES)
-		wsize--;   /* Take the smallest one */
-	if (ret_wsize != NULL)
-		*ret_wsize = wsize;
-	/*
-	 * Note the size we'll actually handle.
-	 */
-	fmt->width = wsize->width;
-	fmt->height = wsize->height;
-	fmt->colorspace = ov7670_formats[index].colorspace;
-	return 0;
-}
-
-static int ov7670_try_mbus_fmt(struct v4l2_subdev *sd,
-			    struct v4l2_mbus_framefmt *fmt)
-{
-	return ov7670_try_fmt_internal(sd, fmt, NULL, NULL);
-}
-
-/*
- * Set a format.
- */
-static int ov7670_s_mbus_fmt(struct v4l2_subdev *sd,
-			  struct v4l2_mbus_framefmt *fmt)
-{
-	struct ov7670_format_struct *ovfmt;
-	struct ov7670_win_size *wsize;
-	struct ov7670_info *info = to_state(sd);
-	unsigned char com7;
-	int ret;
-
-	ret = ov7670_try_fmt_internal(sd, fmt, &ovfmt, &wsize);
-
-	if (ret)
-		return ret;
-	/*
-	 * COM7 is a pain in the ass, it doesn't like to be read then
-	 * quickly written afterward.  But we have everything we need
-	 * to set it absolutely here, as long as the format-specific
-	 * register sets list it first.
-	 */
-	com7 = ovfmt->regs[0].value;
-	com7 |= wsize->com7_bit;
-	ov7670_write(sd, REG_COM7, com7);
-	/*
-	 * Now write the rest of the array.  Also store start/stops
-	 */
-	ov7670_write_array(sd, ovfmt->regs + 1);
-	ov7670_set_hw(sd, wsize->hstart, wsize->hstop, wsize->vstart,
-			wsize->vstop);
-	ret = 0;
-	if (wsize->regs)
-		ret = ov7670_write_array(sd, wsize->regs);
-	info->fmt = ovfmt;
-
-	/*
-	 * If we're running RGB565, we must rewrite clkrc after setting
-	 * the other parameters or the image looks poor.  If we're *not*
-	 * doing RGB565, we must not rewrite clkrc or the image looks
-	 * *really* poor.
-	 *
-	 * (Update) Now that we retain clkrc state, we should be able
-	 * to write it unconditionally, and that will make the frame
-	 * rate persistent too.
-	 */
-	if (ret == 0)
-		ret = ov7670_write(sd, REG_CLKRC, info->clkrc);
-	return 0;
-}
-
-/*
- * Implement G/S_PARM.  There is a "high quality" mode we could try
- * to do someday; for now, we just do the frame rate tweak.
- */
-static int ov7670_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
-{
-	struct v4l2_captureparm *cp = &parms->parm.capture;
-	struct ov7670_info *info = to_state(sd);
-
-	if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-
-	memset(cp, 0, sizeof(struct v4l2_captureparm));
-	cp->capability = V4L2_CAP_TIMEPERFRAME;
-	cp->timeperframe.numerator = 1;
-	cp->timeperframe.denominator = info->clock_speed;
-	if ((info->clkrc & CLK_EXT) == 0 && (info->clkrc & CLK_SCALE) > 1)
-		cp->timeperframe.denominator /= (info->clkrc & CLK_SCALE);
-	return 0;
-}
-
-static int ov7670_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
-{
-	struct v4l2_captureparm *cp = &parms->parm.capture;
-	struct v4l2_fract *tpf = &cp->timeperframe;
-	struct ov7670_info *info = to_state(sd);
-	int div;
-
-	if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	if (cp->extendedmode != 0)
-		return -EINVAL;
-
-	if (tpf->numerator == 0 || tpf->denominator == 0)
-		div = 1;  /* Reset to full rate */
-	else
-		div = (tpf->numerator * info->clock_speed) / tpf->denominator;
-	if (div == 0)
-		div = 1;
-	else if (div > CLK_SCALE)
-		div = CLK_SCALE;
-	info->clkrc = (info->clkrc & 0x80) | div;
-	tpf->numerator = 1;
-	tpf->denominator = info->clock_speed / div;
-	return ov7670_write(sd, REG_CLKRC, info->clkrc);
-}
-
-
-/*
- * Frame intervals.  Since frame rates are controlled with the clock
- * divider, we can only do 30/n for integer n values.  So no continuous
- * or stepwise options.  Here we just pick a handful of logical values.
- */
-
-static int ov7670_frame_rates[] = { 30, 15, 10, 5, 1 };
-
-static int ov7670_enum_frameintervals(struct v4l2_subdev *sd,
-		struct v4l2_frmivalenum *interval)
-{
-	if (interval->index >= ARRAY_SIZE(ov7670_frame_rates))
-		return -EINVAL;
-	interval->type = V4L2_FRMIVAL_TYPE_DISCRETE;
-	interval->discrete.numerator = 1;
-	interval->discrete.denominator = ov7670_frame_rates[interval->index];
-	return 0;
-}
-
-/*
- * Frame size enumeration
- */
-static int ov7670_enum_framesizes(struct v4l2_subdev *sd,
-		struct v4l2_frmsizeenum *fsize)
-{
-	struct ov7670_info *info = to_state(sd);
-	int i;
-	int num_valid = -1;
-	__u32 index = fsize->index;
-
-	/*
-	 * If a minimum width/height was requested, filter out the capture
-	 * windows that fall outside that.
-	 */
-	for (i = 0; i < N_WIN_SIZES; i++) {
-		struct ov7670_win_size *win = &ov7670_win_sizes[index];
-		if (info->min_width && win->width < info->min_width)
-			continue;
-		if (info->min_height && win->height < info->min_height)
-			continue;
-		if (index == ++num_valid) {
-			fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
-			fsize->discrete.width = win->width;
-			fsize->discrete.height = win->height;
-			return 0;
-		}
-	}
-
-	return -EINVAL;
-}
-
-/*
- * Code for dealing with controls.
- */
-
-static int ov7670_store_cmatrix(struct v4l2_subdev *sd,
-		int matrix[CMATRIX_LEN])
-{
-	int i, ret;
-	unsigned char signbits = 0;
-
-	/*
-	 * Weird crap seems to exist in the upper part of
-	 * the sign bits register, so let's preserve it.
-	 */
-	ret = ov7670_read(sd, REG_CMATRIX_SIGN, &signbits);
-	signbits &= 0xc0;
-
-	for (i = 0; i < CMATRIX_LEN; i++) {
-		unsigned char raw;
-
-		if (matrix[i] < 0) {
-			signbits |= (1 << i);
-			if (matrix[i] < -255)
-				raw = 0xff;
-			else
-				raw = (-1 * matrix[i]) & 0xff;
-		}
-		else {
-			if (matrix[i] > 255)
-				raw = 0xff;
-			else
-				raw = matrix[i] & 0xff;
-		}
-		ret += ov7670_write(sd, REG_CMATRIX_BASE + i, raw);
-	}
-	ret += ov7670_write(sd, REG_CMATRIX_SIGN, signbits);
-	return ret;
-}
-
-
-/*
- * Hue also requires messing with the color matrix.  It also requires
- * trig functions, which tend not to be well supported in the kernel.
- * So here is a simple table of sine values, 0-90 degrees, in steps
- * of five degrees.  Values are multiplied by 1000.
- *
- * The following naive approximate trig functions require an argument
- * carefully limited to -180 <= theta <= 180.
- */
-#define SIN_STEP 5
-static const int ov7670_sin_table[] = {
-	   0,	 87,   173,   258,   342,   422,
-	 499,	573,   642,   707,   766,   819,
-	 866,	906,   939,   965,   984,   996,
-	1000
-};
-
-static int ov7670_sine(int theta)
-{
-	int chs = 1;
-	int sine;
-
-	if (theta < 0) {
-		theta = -theta;
-		chs = -1;
-	}
-	if (theta <= 90)
-		sine = ov7670_sin_table[theta/SIN_STEP];
-	else {
-		theta -= 90;
-		sine = 1000 - ov7670_sin_table[theta/SIN_STEP];
-	}
-	return sine*chs;
-}
-
-static int ov7670_cosine(int theta)
-{
-	theta = 90 - theta;
-	if (theta > 180)
-		theta -= 360;
-	else if (theta < -180)
-		theta += 360;
-	return ov7670_sine(theta);
-}
-
-
-
-
-static void ov7670_calc_cmatrix(struct ov7670_info *info,
-		int matrix[CMATRIX_LEN])
-{
-	int i;
-	/*
-	 * Apply the current saturation setting first.
-	 */
-	for (i = 0; i < CMATRIX_LEN; i++)
-		matrix[i] = (info->fmt->cmatrix[i]*info->sat) >> 7;
-	/*
-	 * Then, if need be, rotate the hue value.
-	 */
-	if (info->hue != 0) {
-		int sinth, costh, tmpmatrix[CMATRIX_LEN];
-
-		memcpy(tmpmatrix, matrix, CMATRIX_LEN*sizeof(int));
-		sinth = ov7670_sine(info->hue);
-		costh = ov7670_cosine(info->hue);
-
-		matrix[0] = (matrix[3]*sinth + matrix[0]*costh)/1000;
-		matrix[1] = (matrix[4]*sinth + matrix[1]*costh)/1000;
-		matrix[2] = (matrix[5]*sinth + matrix[2]*costh)/1000;
-		matrix[3] = (matrix[3]*costh - matrix[0]*sinth)/1000;
-		matrix[4] = (matrix[4]*costh - matrix[1]*sinth)/1000;
-		matrix[5] = (matrix[5]*costh - matrix[2]*sinth)/1000;
-	}
-}
-
-
-
-static int ov7670_s_sat(struct v4l2_subdev *sd, int value)
-{
-	struct ov7670_info *info = to_state(sd);
-	int matrix[CMATRIX_LEN];
-	int ret;
-
-	info->sat = value;
-	ov7670_calc_cmatrix(info, matrix);
-	ret = ov7670_store_cmatrix(sd, matrix);
-	return ret;
-}
-
-static int ov7670_g_sat(struct v4l2_subdev *sd, __s32 *value)
-{
-	struct ov7670_info *info = to_state(sd);
-
-	*value = info->sat;
-	return 0;
-}
-
-static int ov7670_s_hue(struct v4l2_subdev *sd, int value)
-{
-	struct ov7670_info *info = to_state(sd);
-	int matrix[CMATRIX_LEN];
-	int ret;
-
-	if (value < -180 || value > 180)
-		return -EINVAL;
-	info->hue = value;
-	ov7670_calc_cmatrix(info, matrix);
-	ret = ov7670_store_cmatrix(sd, matrix);
-	return ret;
-}
-
-
-static int ov7670_g_hue(struct v4l2_subdev *sd, __s32 *value)
-{
-	struct ov7670_info *info = to_state(sd);
-
-	*value = info->hue;
-	return 0;
-}
-
-
-/*
- * Some weird registers seem to store values in a sign/magnitude format!
- */
-static unsigned char ov7670_sm_to_abs(unsigned char v)
-{
-	if ((v & 0x80) == 0)
-		return v + 128;
-	return 128 - (v & 0x7f);
-}
-
-
-static unsigned char ov7670_abs_to_sm(unsigned char v)
-{
-	if (v > 127)
-		return v & 0x7f;
-	return (128 - v) | 0x80;
-}
-
-static int ov7670_s_brightness(struct v4l2_subdev *sd, int value)
-{
-	unsigned char com8 = 0, v;
-	int ret;
-
-	ov7670_read(sd, REG_COM8, &com8);
-	com8 &= ~COM8_AEC;
-	ov7670_write(sd, REG_COM8, com8);
-	v = ov7670_abs_to_sm(value);
-	ret = ov7670_write(sd, REG_BRIGHT, v);
-	return ret;
-}
-
-static int ov7670_g_brightness(struct v4l2_subdev *sd, __s32 *value)
-{
-	unsigned char v = 0;
-	int ret = ov7670_read(sd, REG_BRIGHT, &v);
-
-	*value = ov7670_sm_to_abs(v);
-	return ret;
-}
-
-static int ov7670_s_contrast(struct v4l2_subdev *sd, int value)
-{
-	return ov7670_write(sd, REG_CONTRAS, (unsigned char) value);
-}
-
-static int ov7670_g_contrast(struct v4l2_subdev *sd, __s32 *value)
-{
-	unsigned char v = 0;
-	int ret = ov7670_read(sd, REG_CONTRAS, &v);
-
-	*value = v;
-	return ret;
-}
-
-static int ov7670_g_hflip(struct v4l2_subdev *sd, __s32 *value)
-{
-	int ret;
-	unsigned char v = 0;
-
-	ret = ov7670_read(sd, REG_MVFP, &v);
-	*value = (v & MVFP_MIRROR) == MVFP_MIRROR;
-	return ret;
-}
-
-
-static int ov7670_s_hflip(struct v4l2_subdev *sd, int value)
-{
-	unsigned char v = 0;
-	int ret;
-
-	ret = ov7670_read(sd, REG_MVFP, &v);
-	if (value)
-		v |= MVFP_MIRROR;
-	else
-		v &= ~MVFP_MIRROR;
-	msleep(10);  /* FIXME */
-	ret += ov7670_write(sd, REG_MVFP, v);
-	return ret;
-}
-
-
-
-static int ov7670_g_vflip(struct v4l2_subdev *sd, __s32 *value)
-{
-	int ret;
-	unsigned char v = 0;
-
-	ret = ov7670_read(sd, REG_MVFP, &v);
-	*value = (v & MVFP_FLIP) == MVFP_FLIP;
-	return ret;
-}
-
-
-static int ov7670_s_vflip(struct v4l2_subdev *sd, int value)
-{
-	unsigned char v = 0;
-	int ret;
-
-	ret = ov7670_read(sd, REG_MVFP, &v);
-	if (value)
-		v |= MVFP_FLIP;
-	else
-		v &= ~MVFP_FLIP;
-	msleep(10);  /* FIXME */
-	ret += ov7670_write(sd, REG_MVFP, v);
-	return ret;
-}
-
-/*
- * GAIN is split between REG_GAIN and REG_VREF[7:6].  If one believes
- * the data sheet, the VREF parts should be the most significant, but
- * experience shows otherwise.  There seems to be little value in
- * messing with the VREF bits, so we leave them alone.
- */
-static int ov7670_g_gain(struct v4l2_subdev *sd, __s32 *value)
-{
-	int ret;
-	unsigned char gain;
-
-	ret = ov7670_read(sd, REG_GAIN, &gain);
-	*value = gain;
-	return ret;
-}
-
-static int ov7670_s_gain(struct v4l2_subdev *sd, int value)
-{
-	int ret;
-	unsigned char com8;
-
-	ret = ov7670_write(sd, REG_GAIN, value & 0xff);
-	/* Have to turn off AGC as well */
-	if (ret == 0) {
-		ret = ov7670_read(sd, REG_COM8, &com8);
-		ret = ov7670_write(sd, REG_COM8, com8 & ~COM8_AGC);
-	}
-	return ret;
-}
-
-/*
- * Tweak autogain.
- */
-static int ov7670_g_autogain(struct v4l2_subdev *sd, __s32 *value)
-{
-	int ret;
-	unsigned char com8;
-
-	ret = ov7670_read(sd, REG_COM8, &com8);
-	*value = (com8 & COM8_AGC) != 0;
-	return ret;
-}
-
-static int ov7670_s_autogain(struct v4l2_subdev *sd, int value)
-{
-	int ret;
-	unsigned char com8;
-
-	ret = ov7670_read(sd, REG_COM8, &com8);
-	if (ret == 0) {
-		if (value)
-			com8 |= COM8_AGC;
-		else
-			com8 &= ~COM8_AGC;
-		ret = ov7670_write(sd, REG_COM8, com8);
-	}
-	return ret;
-}
-
-/*
- * Exposure is spread all over the place: top 6 bits in AECHH, middle
- * 8 in AECH, and two stashed in COM1 just for the hell of it.
- */
-static int ov7670_g_exp(struct v4l2_subdev *sd, __s32 *value)
-{
-	int ret;
-	unsigned char com1, aech, aechh;
-
-	ret = ov7670_read(sd, REG_COM1, &com1) +
-		ov7670_read(sd, REG_AECH, &aech) +
-		ov7670_read(sd, REG_AECHH, &aechh);
-	*value = ((aechh & 0x3f) << 10) | (aech << 2) | (com1 & 0x03);
-	return ret;
-}
-
-static int ov7670_s_exp(struct v4l2_subdev *sd, int value)
-{
-	int ret;
-	unsigned char com1, com8, aech, aechh;
-
-	ret = ov7670_read(sd, REG_COM1, &com1) +
-		ov7670_read(sd, REG_COM8, &com8);
-		ov7670_read(sd, REG_AECHH, &aechh);
-	if (ret)
-		return ret;
-
-	com1 = (com1 & 0xfc) | (value & 0x03);
-	aech = (value >> 2) & 0xff;
-	aechh = (aechh & 0xc0) | ((value >> 10) & 0x3f);
-	ret = ov7670_write(sd, REG_COM1, com1) +
-		ov7670_write(sd, REG_AECH, aech) +
-		ov7670_write(sd, REG_AECHH, aechh);
-	/* Have to turn off AEC as well */
-	if (ret == 0)
-		ret = ov7670_write(sd, REG_COM8, com8 & ~COM8_AEC);
-	return ret;
-}
-
-/*
- * Tweak autoexposure.
- */
-static int ov7670_g_autoexp(struct v4l2_subdev *sd, __s32 *value)
-{
-	int ret;
-	unsigned char com8;
-	enum v4l2_exposure_auto_type *atype = (enum v4l2_exposure_auto_type *) value;
-
-	ret = ov7670_read(sd, REG_COM8, &com8);
-	if (com8 & COM8_AEC)
-		*atype = V4L2_EXPOSURE_AUTO;
-	else
-		*atype = V4L2_EXPOSURE_MANUAL;
-	return ret;
-}
-
-static int ov7670_s_autoexp(struct v4l2_subdev *sd,
-		enum v4l2_exposure_auto_type value)
-{
-	int ret;
-	unsigned char com8;
-
-	ret = ov7670_read(sd, REG_COM8, &com8);
-	if (ret == 0) {
-		if (value == V4L2_EXPOSURE_AUTO)
-			com8 |= COM8_AEC;
-		else
-			com8 &= ~COM8_AEC;
-		ret = ov7670_write(sd, REG_COM8, com8);
-	}
-	return ret;
-}
-
-
-
-static int ov7670_queryctrl(struct v4l2_subdev *sd,
-		struct v4l2_queryctrl *qc)
-{
-	/* Fill in min, max, step and default value for these controls. */
-	switch (qc->id) {
-	case V4L2_CID_BRIGHTNESS:
-		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
-	case V4L2_CID_CONTRAST:
-		return v4l2_ctrl_query_fill(qc, 0, 127, 1, 64);
-	case V4L2_CID_VFLIP:
-	case V4L2_CID_HFLIP:
-		return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
-	case V4L2_CID_SATURATION:
-		return v4l2_ctrl_query_fill(qc, 0, 256, 1, 128);
-	case V4L2_CID_HUE:
-		return v4l2_ctrl_query_fill(qc, -180, 180, 5, 0);
-	case V4L2_CID_GAIN:
-		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
-	case V4L2_CID_AUTOGAIN:
-		return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
-	case V4L2_CID_EXPOSURE:
-		return v4l2_ctrl_query_fill(qc, 0, 65535, 1, 500);
-	case V4L2_CID_EXPOSURE_AUTO:
-		return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
-	}
-	return -EINVAL;
-}
-
-static int ov7670_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		return ov7670_g_brightness(sd, &ctrl->value);
-	case V4L2_CID_CONTRAST:
-		return ov7670_g_contrast(sd, &ctrl->value);
-	case V4L2_CID_SATURATION:
-		return ov7670_g_sat(sd, &ctrl->value);
-	case V4L2_CID_HUE:
-		return ov7670_g_hue(sd, &ctrl->value);
-	case V4L2_CID_VFLIP:
-		return ov7670_g_vflip(sd, &ctrl->value);
-	case V4L2_CID_HFLIP:
-		return ov7670_g_hflip(sd, &ctrl->value);
-	case V4L2_CID_GAIN:
-		return ov7670_g_gain(sd, &ctrl->value);
-	case V4L2_CID_AUTOGAIN:
-		return ov7670_g_autogain(sd, &ctrl->value);
-	case V4L2_CID_EXPOSURE:
-		return ov7670_g_exp(sd, &ctrl->value);
-	case V4L2_CID_EXPOSURE_AUTO:
-		return ov7670_g_autoexp(sd, &ctrl->value);
-	}
-	return -EINVAL;
-}
-
-static int ov7670_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		return ov7670_s_brightness(sd, ctrl->value);
-	case V4L2_CID_CONTRAST:
-		return ov7670_s_contrast(sd, ctrl->value);
-	case V4L2_CID_SATURATION:
-		return ov7670_s_sat(sd, ctrl->value);
-	case V4L2_CID_HUE:
-		return ov7670_s_hue(sd, ctrl->value);
-	case V4L2_CID_VFLIP:
-		return ov7670_s_vflip(sd, ctrl->value);
-	case V4L2_CID_HFLIP:
-		return ov7670_s_hflip(sd, ctrl->value);
-	case V4L2_CID_GAIN:
-		return ov7670_s_gain(sd, ctrl->value);
-	case V4L2_CID_AUTOGAIN:
-		return ov7670_s_autogain(sd, ctrl->value);
-	case V4L2_CID_EXPOSURE:
-		return ov7670_s_exp(sd, ctrl->value);
-	case V4L2_CID_EXPOSURE_AUTO:
-		return ov7670_s_autoexp(sd,
-				(enum v4l2_exposure_auto_type) ctrl->value);
-	}
-	return -EINVAL;
-}
-
-static int ov7670_g_chip_ident(struct v4l2_subdev *sd,
-		struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_OV7670, 0);
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int ov7670_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	unsigned char val = 0;
-	int ret;
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	ret = ov7670_read(sd, reg->reg & 0xff, &val);
-	reg->val = val;
-	reg->size = 1;
-	return ret;
-}
-
-static int ov7670_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	ov7670_write(sd, reg->reg & 0xff, reg->val & 0xff);
-	return 0;
-}
-#endif
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops ov7670_core_ops = {
-	.g_chip_ident = ov7670_g_chip_ident,
-	.g_ctrl = ov7670_g_ctrl,
-	.s_ctrl = ov7670_s_ctrl,
-	.queryctrl = ov7670_queryctrl,
-	.reset = ov7670_reset,
-	.init = ov7670_init,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.g_register = ov7670_g_register,
-	.s_register = ov7670_s_register,
-#endif
-};
-
-static const struct v4l2_subdev_video_ops ov7670_video_ops = {
-	.enum_mbus_fmt = ov7670_enum_mbus_fmt,
-	.try_mbus_fmt = ov7670_try_mbus_fmt,
-	.s_mbus_fmt = ov7670_s_mbus_fmt,
-	.s_parm = ov7670_s_parm,
-	.g_parm = ov7670_g_parm,
-	.enum_frameintervals = ov7670_enum_frameintervals,
-	.enum_framesizes = ov7670_enum_framesizes,
-};
-
-static const struct v4l2_subdev_ops ov7670_ops = {
-	.core = &ov7670_core_ops,
-	.video = &ov7670_video_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static int ov7670_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	struct v4l2_subdev *sd;
-	struct ov7670_info *info;
-	int ret;
-
-	info = kzalloc(sizeof(struct ov7670_info), GFP_KERNEL);
-	if (info == NULL)
-		return -ENOMEM;
-	sd = &info->sd;
-	v4l2_i2c_subdev_init(sd, client, &ov7670_ops);
-
-	info->clock_speed = 30; /* default: a guess */
-	if (client->dev.platform_data) {
-		struct ov7670_config *config = client->dev.platform_data;
-
-		/*
-		 * Must apply configuration before initializing device, because it
-		 * selects I/O method.
-		 */
-		info->min_width = config->min_width;
-		info->min_height = config->min_height;
-		info->use_smbus = config->use_smbus;
-
-		if (config->clock_speed)
-			info->clock_speed = config->clock_speed;
-	}
-
-	/* Make sure it's an ov7670 */
-	ret = ov7670_detect(sd);
-	if (ret) {
-		v4l_dbg(1, debug, client,
-			"chip found @ 0x%x (%s) is not an ov7670 chip.\n",
-			client->addr << 1, client->adapter->name);
-		kfree(info);
-		return ret;
-	}
-	v4l_info(client, "chip found @ 0x%02x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	info->fmt = &ov7670_formats[0];
-	info->sat = 128;	/* Review this */
-	info->clkrc = info->clock_speed / 30;
-	return 0;
-}
-
-
-static int ov7670_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-
-	v4l2_device_unregister_subdev(sd);
-	kfree(to_state(sd));
-	return 0;
-}
-
-static const struct i2c_device_id ov7670_id[] = {
-	{ "ov7670", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, ov7670_id);
-
-static struct i2c_driver ov7670_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "ov7670",
-	},
-	.probe		= ov7670_probe,
-	.remove		= ov7670_remove,
-	.id_table	= ov7670_id,
-};
-
-module_i2c_driver(ov7670_driver);
diff --git a/drivers/media/video/s5k6aa.c b/drivers/media/video/s5k6aa.c
deleted file mode 100644
index 045ca7f..0000000
--- a/drivers/media/video/s5k6aa.c
+++ /dev/null
@@ -1,1667 +0,0 @@
-/*
- * Driver for Samsung S5K6AAFX SXGA 1/6" 1.3M CMOS Image Sensor
- * with embedded SoC ISP.
- *
- * Copyright (C) 2011, Samsung Electronics Co., Ltd.
- * Sylwester Nawrocki <s.nawrocki@samsung.com>
- *
- * Based on a driver authored by Dongsoo Nathaniel Kim.
- * Copyright (C) 2009, Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/media.h>
-#include <linux/module.h>
-#include <linux/regulator/consumer.h>
-#include <linux/slab.h>
-
-#include <media/media-entity.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-subdev.h>
-#include <media/v4l2-mediabus.h>
-#include <media/s5k6aa.h>
-
-static int debug;
-module_param(debug, int, 0644);
-
-#define DRIVER_NAME			"S5K6AA"
-
-/* The token to indicate array termination */
-#define S5K6AA_TERM			0xffff
-#define S5K6AA_OUT_WIDTH_DEF		640
-#define S5K6AA_OUT_HEIGHT_DEF		480
-#define S5K6AA_WIN_WIDTH_MAX		1280
-#define S5K6AA_WIN_HEIGHT_MAX		1024
-#define S5K6AA_WIN_WIDTH_MIN		8
-#define S5K6AA_WIN_HEIGHT_MIN		8
-
-/*
- * H/W register Interface (0xD0000000 - 0xD0000FFF)
- */
-#define AHB_MSB_ADDR_PTR		0xfcfc
-#define GEN_REG_OFFSH			0xd000
-#define REG_CMDWR_ADDRH			0x0028
-#define REG_CMDWR_ADDRL			0x002a
-#define REG_CMDRD_ADDRH			0x002c
-#define REG_CMDRD_ADDRL			0x002e
-#define REG_CMDBUF0_ADDR		0x0f12
-#define REG_CMDBUF1_ADDR		0x0f10
-
-/*
- * Host S/W Register interface (0x70000000 - 0x70002000)
- * The value of the two most significant address bytes is 0x7000,
- * (HOST_SWIF_OFFS_H). The register addresses below specify 2 LSBs.
- */
-#define HOST_SWIF_OFFSH			0x7000
-
-/* Initialization parameters */
-/* Master clock frequency in KHz */
-#define REG_I_INCLK_FREQ_L		0x01b8
-#define REG_I_INCLK_FREQ_H		0x01ba
-#define  MIN_MCLK_FREQ_KHZ		6000U
-#define  MAX_MCLK_FREQ_KHZ		27000U
-#define REG_I_USE_NPVI_CLOCKS		0x01c6
-#define REG_I_USE_NMIPI_CLOCKS		0x01c8
-
-/* Clock configurations, n = 0..2. REG_I_* frequency unit is 4 kHz. */
-#define REG_I_OPCLK_4KHZ(n)		((n) * 6 + 0x01cc)
-#define REG_I_MIN_OUTRATE_4KHZ(n)	((n) * 6 + 0x01ce)
-#define REG_I_MAX_OUTRATE_4KHZ(n)	((n) * 6 + 0x01d0)
-#define  SYS_PLL_OUT_FREQ		(48000000 / 4000)
-#define  PCLK_FREQ_MIN			(24000000 / 4000)
-#define  PCLK_FREQ_MAX			(48000000 / 4000)
-#define REG_I_INIT_PARAMS_UPDATED	0x01e0
-#define REG_I_ERROR_INFO		0x01e2
-
-/* General purpose parameters */
-#define REG_USER_BRIGHTNESS		0x01e4
-#define REG_USER_CONTRAST		0x01e6
-#define REG_USER_SATURATION		0x01e8
-#define REG_USER_SHARPBLUR		0x01ea
-
-#define REG_G_SPEC_EFFECTS		0x01ee
-#define REG_G_ENABLE_PREV		0x01f0
-#define REG_G_ENABLE_PREV_CHG		0x01f2
-#define REG_G_NEW_CFG_SYNC		0x01f8
-#define REG_G_PREVZOOM_IN_WIDTH		0x020a
-#define REG_G_PREVZOOM_IN_HEIGHT	0x020c
-#define REG_G_PREVZOOM_IN_XOFFS		0x020e
-#define REG_G_PREVZOOM_IN_YOFFS		0x0210
-#define REG_G_INPUTS_CHANGE_REQ		0x021a
-#define REG_G_ACTIVE_PREV_CFG		0x021c
-#define REG_G_PREV_CFG_CHG		0x021e
-#define REG_G_PREV_OPEN_AFTER_CH	0x0220
-#define REG_G_PREV_CFG_ERROR		0x0222
-
-/* Preview control section. n = 0...4. */
-#define PREG(n, x)			((n) * 0x26 + x)
-#define REG_P_OUT_WIDTH(n)		PREG(n, 0x0242)
-#define REG_P_OUT_HEIGHT(n)		PREG(n, 0x0244)
-#define REG_P_FMT(n)			PREG(n, 0x0246)
-#define REG_P_MAX_OUT_RATE(n)		PREG(n, 0x0248)
-#define REG_P_MIN_OUT_RATE(n)		PREG(n, 0x024a)
-#define REG_P_PVI_MASK(n)		PREG(n, 0x024c)
-#define REG_P_CLK_INDEX(n)		PREG(n, 0x024e)
-#define REG_P_FR_RATE_TYPE(n)		PREG(n, 0x0250)
-#define  FR_RATE_DYNAMIC		0
-#define  FR_RATE_FIXED			1
-#define  FR_RATE_FIXED_ACCURATE		2
-#define REG_P_FR_RATE_Q_TYPE(n)		PREG(n, 0x0252)
-#define  FR_RATE_Q_BEST_FRRATE		1 /* Binning enabled */
-#define  FR_RATE_Q_BEST_QUALITY		2 /* Binning disabled */
-/* Frame period in 0.1 ms units */
-#define REG_P_MAX_FR_TIME(n)		PREG(n, 0x0254)
-#define REG_P_MIN_FR_TIME(n)		PREG(n, 0x0256)
-/* Conversion to REG_P_[MAX/MIN]_FR_TIME value; __t: time in us */
-#define  US_TO_FR_TIME(__t)		((__t) / 100)
-#define  S5K6AA_MIN_FR_TIME		33300  /* us */
-#define  S5K6AA_MAX_FR_TIME		650000 /* us */
-#define  S5K6AA_MAX_HIGHRES_FR_TIME	666    /* x100 us */
-/* The below 5 registers are for "device correction" values */
-#define REG_P_COLORTEMP(n)		PREG(n, 0x025e)
-#define REG_P_PREV_MIRROR(n)		PREG(n, 0x0262)
-
-/* Extended image property controls */
-/* Exposure time in 10 us units */
-#define REG_SF_USR_EXPOSURE_L		0x03c6
-#define REG_SF_USR_EXPOSURE_H		0x03c8
-#define REG_SF_USR_EXPOSURE_CHG		0x03ca
-#define REG_SF_USR_TOT_GAIN		0x03cc
-#define REG_SF_USR_TOT_GAIN_CHG		0x03ce
-#define REG_SF_RGAIN			0x03d0
-#define REG_SF_RGAIN_CHG		0x03d2
-#define REG_SF_GGAIN			0x03d4
-#define REG_SF_GGAIN_CHG		0x03d6
-#define REG_SF_BGAIN			0x03d8
-#define REG_SF_BGAIN_CHG		0x03da
-#define REG_SF_FLICKER_QUANT		0x03dc
-#define REG_SF_FLICKER_QUANT_CHG	0x03de
-
-/* Output interface (parallel/MIPI) setup */
-#define REG_OIF_EN_MIPI_LANES		0x03fa
-#define REG_OIF_EN_PACKETS		0x03fc
-#define REG_OIF_CFG_CHG			0x03fe
-
-/* Auto-algorithms enable mask */
-#define REG_DBG_AUTOALG_EN		0x0400
-#define  AALG_ALL_EN_MASK		(1 << 0)
-#define  AALG_AE_EN_MASK		(1 << 1)
-#define  AALG_DIVLEI_EN_MASK		(1 << 2)
-#define  AALG_WB_EN_MASK		(1 << 3)
-#define  AALG_FLICKER_EN_MASK		(1 << 5)
-#define  AALG_FIT_EN_MASK		(1 << 6)
-#define  AALG_WRHW_EN_MASK		(1 << 7)
-
-/* Firmware revision information */
-#define REG_FW_APIVER			0x012e
-#define  S5K6AAFX_FW_APIVER		0x0001
-#define REG_FW_REVISION			0x0130
-
-/* For now we use only one user configuration register set */
-#define S5K6AA_MAX_PRESETS		1
-
-static const char * const s5k6aa_supply_names[] = {
-	"vdd_core",	/* Digital core supply 1.5V (1.4V to 1.6V) */
-	"vdda",		/* Analog power supply 2.8V (2.6V to 3.0V) */
-	"vdd_reg",	/* Regulator input power 1.8V (1.7V to 1.9V)
-			   or 2.8V (2.6V to 3.0) */
-	"vddio",	/* I/O supply 1.8V (1.65V to 1.95V)
-			   or 2.8V (2.5V to 3.1V) */
-};
-#define S5K6AA_NUM_SUPPLIES ARRAY_SIZE(s5k6aa_supply_names)
-
-enum s5k6aa_gpio_id {
-	STBY,
-	RST,
-	GPIO_NUM,
-};
-
-struct s5k6aa_regval {
-	u16 addr;
-	u16 val;
-};
-
-struct s5k6aa_pixfmt {
-	enum v4l2_mbus_pixelcode code;
-	u32 colorspace;
-	/* REG_P_FMT(x) register value */
-	u16 reg_p_fmt;
-};
-
-struct s5k6aa_preset {
-	/* output pixel format and resolution */
-	struct v4l2_mbus_framefmt mbus_fmt;
-	u8 clk_id;
-	u8 index;
-};
-
-struct s5k6aa_ctrls {
-	struct v4l2_ctrl_handler handler;
-	/* Auto / manual white balance cluster */
-	struct v4l2_ctrl *awb;
-	struct v4l2_ctrl *gain_red;
-	struct v4l2_ctrl *gain_blue;
-	struct v4l2_ctrl *gain_green;
-	/* Mirror cluster */
-	struct v4l2_ctrl *hflip;
-	struct v4l2_ctrl *vflip;
-	/* Auto exposure / manual exposure and gain cluster */
-	struct v4l2_ctrl *auto_exp;
-	struct v4l2_ctrl *exposure;
-	struct v4l2_ctrl *gain;
-};
-
-struct s5k6aa_interval {
-	u16 reg_fr_time;
-	struct v4l2_fract interval;
-	/* Maximum rectangle for the interval */
-	struct v4l2_frmsize_discrete size;
-};
-
-struct s5k6aa {
-	struct v4l2_subdev sd;
-	struct media_pad pad;
-
-	enum v4l2_mbus_type bus_type;
-	u8 mipi_lanes;
-
-	int (*s_power)(int enable);
-	struct regulator_bulk_data supplies[S5K6AA_NUM_SUPPLIES];
-	struct s5k6aa_gpio gpio[GPIO_NUM];
-
-	/* external master clock frequency */
-	unsigned long mclk_frequency;
-	/* ISP internal master clock frequency */
-	u16 clk_fop;
-	/* output pixel clock frequency range */
-	u16 pclk_fmin;
-	u16 pclk_fmax;
-
-	unsigned int inv_hflip:1;
-	unsigned int inv_vflip:1;
-
-	/* protects the struct members below */
-	struct mutex lock;
-
-	/* sensor matrix scan window */
-	struct v4l2_rect ccd_rect;
-
-	struct s5k6aa_ctrls ctrls;
-	struct s5k6aa_preset presets[S5K6AA_MAX_PRESETS];
-	struct s5k6aa_preset *preset;
-	const struct s5k6aa_interval *fiv;
-
-	unsigned int streaming:1;
-	unsigned int apply_cfg:1;
-	unsigned int apply_crop:1;
-	unsigned int power;
-};
-
-static struct s5k6aa_regval s5k6aa_analog_config[] = {
-	/* Analog settings */
-	{ 0x112a, 0x0000 }, { 0x1132, 0x0000 },
-	{ 0x113e, 0x0000 }, { 0x115c, 0x0000 },
-	{ 0x1164, 0x0000 }, { 0x1174, 0x0000 },
-	{ 0x1178, 0x0000 }, { 0x077a, 0x0000 },
-	{ 0x077c, 0x0000 }, { 0x077e, 0x0000 },
-	{ 0x0780, 0x0000 }, { 0x0782, 0x0000 },
-	{ 0x0784, 0x0000 }, { 0x0786, 0x0000 },
-	{ 0x0788, 0x0000 }, { 0x07a2, 0x0000 },
-	{ 0x07a4, 0x0000 }, { 0x07a6, 0x0000 },
-	{ 0x07a8, 0x0000 }, { 0x07b6, 0x0000 },
-	{ 0x07b8, 0x0002 }, { 0x07ba, 0x0004 },
-	{ 0x07bc, 0x0004 }, { 0x07be, 0x0005 },
-	{ 0x07c0, 0x0005 }, { S5K6AA_TERM, 0 },
-};
-
-/* TODO: Add RGB888 and Bayer format */
-static const struct s5k6aa_pixfmt s5k6aa_formats[] = {
-	{ V4L2_MBUS_FMT_YUYV8_2X8,	V4L2_COLORSPACE_JPEG,	5 },
-	/* range 16-240 */
-	{ V4L2_MBUS_FMT_YUYV8_2X8,	V4L2_COLORSPACE_REC709,	6 },
-	{ V4L2_MBUS_FMT_RGB565_2X8_BE,	V4L2_COLORSPACE_JPEG,	0 },
-};
-
-static const struct s5k6aa_interval s5k6aa_intervals[] = {
-	{ 1000, {10000, 1000000}, {1280, 1024} }, /* 10 fps */
-	{ 666,  {15000, 1000000}, {1280, 1024} }, /* 15 fps */
-	{ 500,  {20000, 1000000}, {1280, 720} },  /* 20 fps */
-	{ 400,  {25000, 1000000}, {640, 480} },   /* 25 fps */
-	{ 333,  {33300, 1000000}, {640, 480} },   /* 30 fps */
-};
-
-#define S5K6AA_INTERVAL_DEF_INDEX 1 /* 15 fps */
-
-static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl)
-{
-	return &container_of(ctrl->handler, struct s5k6aa, ctrls.handler)->sd;
-}
-
-static inline struct s5k6aa *to_s5k6aa(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct s5k6aa, sd);
-}
-
-/* Set initial values for all preview presets */
-static void s5k6aa_presets_data_init(struct s5k6aa *s5k6aa)
-{
-	struct s5k6aa_preset *preset = &s5k6aa->presets[0];
-	int i;
-
-	for (i = 0; i < S5K6AA_MAX_PRESETS; i++) {
-		preset->mbus_fmt.width	= S5K6AA_OUT_WIDTH_DEF;
-		preset->mbus_fmt.height	= S5K6AA_OUT_HEIGHT_DEF;
-		preset->mbus_fmt.code	= s5k6aa_formats[0].code;
-		preset->index		= i;
-		preset->clk_id		= 0;
-		preset++;
-	}
-
-	s5k6aa->fiv = &s5k6aa_intervals[S5K6AA_INTERVAL_DEF_INDEX];
-	s5k6aa->preset = &s5k6aa->presets[0];
-}
-
-static int s5k6aa_i2c_read(struct i2c_client *client, u16 addr, u16 *val)
-{
-	u8 wbuf[2] = {addr >> 8, addr & 0xFF};
-	struct i2c_msg msg[2];
-	u8 rbuf[2];
-	int ret;
-
-	msg[0].addr = client->addr;
-	msg[0].flags = 0;
-	msg[0].len = 2;
-	msg[0].buf = wbuf;
-
-	msg[1].addr = client->addr;
-	msg[1].flags = I2C_M_RD;
-	msg[1].len = 2;
-	msg[1].buf = rbuf;
-
-	ret = i2c_transfer(client->adapter, msg, 2);
-	*val = be16_to_cpu(*((u16 *)rbuf));
-
-	v4l2_dbg(3, debug, client, "i2c_read: 0x%04X : 0x%04x\n", addr, *val);
-
-	return ret == 2 ? 0 : ret;
-}
-
-static int s5k6aa_i2c_write(struct i2c_client *client, u16 addr, u16 val)
-{
-	u8 buf[4] = {addr >> 8, addr & 0xFF, val >> 8, val & 0xFF};
-
-	int ret = i2c_master_send(client, buf, 4);
-	v4l2_dbg(3, debug, client, "i2c_write: 0x%04X : 0x%04x\n", addr, val);
-
-	return ret == 4 ? 0 : ret;
-}
-
-/* The command register write, assumes Command_Wr_addH = 0x7000. */
-static int s5k6aa_write(struct i2c_client *c, u16 addr, u16 val)
-{
-	int ret = s5k6aa_i2c_write(c, REG_CMDWR_ADDRL, addr);
-	if (ret)
-		return ret;
-	return s5k6aa_i2c_write(c, REG_CMDBUF0_ADDR, val);
-}
-
-/* The command register read, assumes Command_Rd_addH = 0x7000. */
-static int s5k6aa_read(struct i2c_client *client, u16 addr, u16 *val)
-{
-	int ret = s5k6aa_i2c_write(client, REG_CMDRD_ADDRL, addr);
-	if (ret)
-		return ret;
-	return s5k6aa_i2c_read(client, REG_CMDBUF0_ADDR, val);
-}
-
-static int s5k6aa_write_array(struct v4l2_subdev *sd,
-			      const struct s5k6aa_regval *msg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u16 addr_incr = 0;
-	int ret = 0;
-
-	while (msg->addr != S5K6AA_TERM) {
-		if (addr_incr != 2)
-			ret = s5k6aa_i2c_write(client, REG_CMDWR_ADDRL,
-					       msg->addr);
-		if (ret)
-			break;
-		ret = s5k6aa_i2c_write(client, REG_CMDBUF0_ADDR, msg->val);
-		if (ret)
-			break;
-		/* Assume that msg->addr is always less than 0xfffc */
-		addr_incr = (msg + 1)->addr - msg->addr;
-		msg++;
-	}
-
-	return ret;
-}
-
-/* Configure the AHB high address bytes for GTG registers access */
-static int s5k6aa_set_ahb_address(struct i2c_client *client)
-{
-	int ret = s5k6aa_i2c_write(client, AHB_MSB_ADDR_PTR, GEN_REG_OFFSH);
-	if (ret)
-		return ret;
-	ret = s5k6aa_i2c_write(client, REG_CMDRD_ADDRH, HOST_SWIF_OFFSH);
-	if (ret)
-		return ret;
-	return s5k6aa_i2c_write(client, REG_CMDWR_ADDRH, HOST_SWIF_OFFSH);
-}
-
-/**
- * s5k6aa_configure_pixel_clock - apply ISP main clock/PLL configuration
- *
- * Configure the internal ISP PLL for the required output frequency.
- * Locking: called with s5k6aa.lock mutex held.
- */
-static int s5k6aa_configure_pixel_clocks(struct s5k6aa *s5k6aa)
-{
-	struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd);
-	unsigned long fmclk = s5k6aa->mclk_frequency / 1000;
-	u16 status;
-	int ret;
-
-	if (WARN(fmclk < MIN_MCLK_FREQ_KHZ || fmclk > MAX_MCLK_FREQ_KHZ,
-		 "Invalid clock frequency: %ld\n", fmclk))
-		return -EINVAL;
-
-	s5k6aa->pclk_fmin = PCLK_FREQ_MIN;
-	s5k6aa->pclk_fmax = PCLK_FREQ_MAX;
-	s5k6aa->clk_fop = SYS_PLL_OUT_FREQ;
-
-	/* External input clock frequency in kHz */
-	ret = s5k6aa_write(c, REG_I_INCLK_FREQ_H, fmclk >> 16);
-	if (!ret)
-		ret = s5k6aa_write(c, REG_I_INCLK_FREQ_L, fmclk & 0xFFFF);
-	if (!ret)
-		ret = s5k6aa_write(c, REG_I_USE_NPVI_CLOCKS, 1);
-	/* Internal PLL frequency */
-	if (!ret)
-		ret = s5k6aa_write(c, REG_I_OPCLK_4KHZ(0), s5k6aa->clk_fop);
-	if (!ret)
-		ret = s5k6aa_write(c, REG_I_MIN_OUTRATE_4KHZ(0),
-				   s5k6aa->pclk_fmin);
-	if (!ret)
-		ret = s5k6aa_write(c, REG_I_MAX_OUTRATE_4KHZ(0),
-				   s5k6aa->pclk_fmax);
-	if (!ret)
-		ret = s5k6aa_write(c, REG_I_INIT_PARAMS_UPDATED, 1);
-	if (!ret)
-		ret = s5k6aa_read(c, REG_I_ERROR_INFO, &status);
-
-	return ret ? ret : (status ? -EINVAL : 0);
-}
-
-/* Set horizontal and vertical image flipping */
-static int s5k6aa_set_mirror(struct s5k6aa *s5k6aa, int horiz_flip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
-	int index = s5k6aa->preset->index;
-
-	unsigned int vflip = s5k6aa->ctrls.vflip->val ^ s5k6aa->inv_vflip;
-	unsigned int flip = (horiz_flip ^ s5k6aa->inv_hflip) | (vflip << 1);
-
-	return s5k6aa_write(client, REG_P_PREV_MIRROR(index), flip);
-}
-
-/* Configure auto/manual white balance and R/G/B gains */
-static int s5k6aa_set_awb(struct s5k6aa *s5k6aa, int awb)
-{
-	struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd);
-	struct s5k6aa_ctrls *ctrls = &s5k6aa->ctrls;
-	u16 reg;
-
-	int ret = s5k6aa_read(c, REG_DBG_AUTOALG_EN, &reg);
-
-	if (!ret && !awb) {
-		ret = s5k6aa_write(c, REG_SF_RGAIN, ctrls->gain_red->val);
-		if (!ret)
-			ret = s5k6aa_write(c, REG_SF_RGAIN_CHG, 1);
-		if (ret)
-			return ret;
-
-		ret = s5k6aa_write(c, REG_SF_GGAIN, ctrls->gain_green->val);
-		if (!ret)
-			ret = s5k6aa_write(c, REG_SF_GGAIN_CHG, 1);
-		if (ret)
-			return ret;
-
-		ret = s5k6aa_write(c, REG_SF_BGAIN, ctrls->gain_blue->val);
-		if (!ret)
-			ret = s5k6aa_write(c, REG_SF_BGAIN_CHG, 1);
-	}
-	if (!ret) {
-		reg = awb ? reg | AALG_WB_EN_MASK : reg & ~AALG_WB_EN_MASK;
-		ret = s5k6aa_write(c, REG_DBG_AUTOALG_EN, reg);
-	}
-
-	return ret;
-}
-
-/* Program FW with exposure time, 'exposure' in us units */
-static int s5k6aa_set_user_exposure(struct i2c_client *client, int exposure)
-{
-	unsigned int time = exposure / 10;
-
-	int ret = s5k6aa_write(client, REG_SF_USR_EXPOSURE_L, time & 0xffff);
-	if (!ret)
-		ret = s5k6aa_write(client, REG_SF_USR_EXPOSURE_H, time >> 16);
-	if (ret)
-		return ret;
-	return s5k6aa_write(client, REG_SF_USR_EXPOSURE_CHG, 1);
-}
-
-static int s5k6aa_set_user_gain(struct i2c_client *client, int gain)
-{
-	int ret = s5k6aa_write(client, REG_SF_USR_TOT_GAIN, gain);
-	if (ret)
-		return ret;
-	return s5k6aa_write(client, REG_SF_USR_TOT_GAIN_CHG, 1);
-}
-
-/* Set auto/manual exposure and total gain */
-static int s5k6aa_set_auto_exposure(struct s5k6aa *s5k6aa, int value)
-{
-	struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd);
-	unsigned int exp_time = s5k6aa->ctrls.exposure->val;
-	u16 auto_alg;
-
-	int ret = s5k6aa_read(c, REG_DBG_AUTOALG_EN, &auto_alg);
-	if (ret)
-		return ret;
-
-	v4l2_dbg(1, debug, c, "man_exp: %d, auto_exp: %d, a_alg: 0x%x\n",
-		 exp_time, value, auto_alg);
-
-	if (value == V4L2_EXPOSURE_AUTO) {
-		auto_alg |= AALG_AE_EN_MASK | AALG_DIVLEI_EN_MASK;
-	} else {
-		ret = s5k6aa_set_user_exposure(c, exp_time);
-		if (ret)
-			return ret;
-		ret = s5k6aa_set_user_gain(c, s5k6aa->ctrls.gain->val);
-		if (ret)
-			return ret;
-		auto_alg &= ~(AALG_AE_EN_MASK | AALG_DIVLEI_EN_MASK);
-	}
-
-	return s5k6aa_write(c, REG_DBG_AUTOALG_EN, auto_alg);
-}
-
-static int s5k6aa_set_anti_flicker(struct s5k6aa *s5k6aa, int value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
-	u16 auto_alg;
-	int ret;
-
-	ret = s5k6aa_read(client, REG_DBG_AUTOALG_EN, &auto_alg);
-	if (ret)
-		return ret;
-
-	if (value == V4L2_CID_POWER_LINE_FREQUENCY_AUTO) {
-		auto_alg |= AALG_FLICKER_EN_MASK;
-	} else {
-		auto_alg &= ~AALG_FLICKER_EN_MASK;
-		/* The V4L2_CID_LINE_FREQUENCY control values match
-		 * the register values */
-		ret = s5k6aa_write(client, REG_SF_FLICKER_QUANT, value);
-		if (ret)
-			return ret;
-		ret = s5k6aa_write(client, REG_SF_FLICKER_QUANT_CHG, 1);
-		if (ret)
-			return ret;
-	}
-
-	return s5k6aa_write(client, REG_DBG_AUTOALG_EN, auto_alg);
-}
-
-static int s5k6aa_set_colorfx(struct s5k6aa *s5k6aa, int val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
-	static const struct v4l2_control colorfx[] = {
-		{ V4L2_COLORFX_NONE,	 0 },
-		{ V4L2_COLORFX_BW,	 1 },
-		{ V4L2_COLORFX_NEGATIVE, 2 },
-		{ V4L2_COLORFX_SEPIA,	 3 },
-		{ V4L2_COLORFX_SKY_BLUE, 4 },
-		{ V4L2_COLORFX_SKETCH,	 5 },
-	};
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(colorfx); i++) {
-		if (colorfx[i].id == val)
-			return s5k6aa_write(client, REG_G_SPEC_EFFECTS,
-					    colorfx[i].value);
-	}
-	return -EINVAL;
-}
-
-static int s5k6aa_preview_config_status(struct i2c_client *client)
-{
-	u16 error = 0;
-	int ret = s5k6aa_read(client, REG_G_PREV_CFG_ERROR, &error);
-
-	v4l2_dbg(1, debug, client, "error: 0x%x (%d)\n", error, ret);
-	return ret ? ret : (error ? -EINVAL : 0);
-}
-
-static int s5k6aa_get_pixfmt_index(struct s5k6aa *s5k6aa,
-				   struct v4l2_mbus_framefmt *mf)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(s5k6aa_formats); i++)
-		if (mf->colorspace == s5k6aa_formats[i].colorspace &&
-		    mf->code == s5k6aa_formats[i].code)
-			return i;
-	return 0;
-}
-
-static int s5k6aa_set_output_framefmt(struct s5k6aa *s5k6aa,
-				      struct s5k6aa_preset *preset)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
-	int fmt_index = s5k6aa_get_pixfmt_index(s5k6aa, &preset->mbus_fmt);
-	int ret;
-
-	ret = s5k6aa_write(client, REG_P_OUT_WIDTH(preset->index),
-			   preset->mbus_fmt.width);
-	if (!ret)
-		ret = s5k6aa_write(client, REG_P_OUT_HEIGHT(preset->index),
-				   preset->mbus_fmt.height);
-	if (!ret)
-		ret = s5k6aa_write(client, REG_P_FMT(preset->index),
-				   s5k6aa_formats[fmt_index].reg_p_fmt);
-	return ret;
-}
-
-static int s5k6aa_set_input_params(struct s5k6aa *s5k6aa)
-{
-	struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd);
-	struct v4l2_rect *r = &s5k6aa->ccd_rect;
-	int ret;
-
-	ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_WIDTH, r->width);
-	if (!ret)
-		ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_HEIGHT, r->height);
-	if (!ret)
-		ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_XOFFS, r->left);
-	if (!ret)
-		ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_YOFFS, r->top);
-	if (!ret)
-		ret = s5k6aa_write(c, REG_G_INPUTS_CHANGE_REQ, 1);
-	if (!ret)
-		s5k6aa->apply_crop = 0;
-
-	return ret;
-}
-
-/**
- * s5k6aa_configure_video_bus - configure the video output interface
- * @bus_type: video bus type: parallel or MIPI-CSI
- * @nlanes: number of MIPI lanes to be used (MIPI-CSI only)
- *
- * Note: Only parallel bus operation has been tested.
- */
-static int s5k6aa_configure_video_bus(struct s5k6aa *s5k6aa,
-				      enum v4l2_mbus_type bus_type, int nlanes)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
-	u16 cfg = 0;
-	int ret;
-
-	/*
-	 * TODO: The sensor is supposed to support BT.601 and BT.656
-	 * but there is nothing indicating how to switch between both
-	 * in the datasheet. For now default BT.601 interface is assumed.
-	 */
-	if (bus_type == V4L2_MBUS_CSI2)
-		cfg = nlanes;
-	else if (bus_type != V4L2_MBUS_PARALLEL)
-		return -EINVAL;
-
-	ret = s5k6aa_write(client, REG_OIF_EN_MIPI_LANES, cfg);
-	if (ret)
-		return ret;
-	return s5k6aa_write(client, REG_OIF_CFG_CHG, 1);
-}
-
-/* This function should be called when switching to new user configuration set*/
-static int s5k6aa_new_config_sync(struct i2c_client *client, int timeout,
-				  int cid)
-{
-	unsigned long end = jiffies + msecs_to_jiffies(timeout);
-	u16 reg = 1;
-	int ret;
-
-	ret = s5k6aa_write(client, REG_G_ACTIVE_PREV_CFG, cid);
-	if (!ret)
-		ret = s5k6aa_write(client, REG_G_PREV_CFG_CHG, 1);
-	if (!ret)
-		ret = s5k6aa_write(client, REG_G_NEW_CFG_SYNC, 1);
-	if (timeout == 0)
-		return ret;
-
-	while (ret >= 0 && time_is_after_jiffies(end)) {
-		ret = s5k6aa_read(client, REG_G_NEW_CFG_SYNC, &reg);
-		if (!reg)
-			return 0;
-		usleep_range(1000, 5000);
-	}
-	return ret ? ret : -ETIMEDOUT;
-}
-
-/**
- * s5k6aa_set_prev_config - write user preview register set
- *
- * Configure output resolution and color fromat, pixel clock
- * frequency range, device frame rate type and frame period range.
- */
-static int s5k6aa_set_prev_config(struct s5k6aa *s5k6aa,
-				  struct s5k6aa_preset *preset)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
-	int idx = preset->index;
-	u16 frame_rate_q;
-	int ret;
-
-	if (s5k6aa->fiv->reg_fr_time >= S5K6AA_MAX_HIGHRES_FR_TIME)
-		frame_rate_q = FR_RATE_Q_BEST_FRRATE;
-	else
-		frame_rate_q = FR_RATE_Q_BEST_QUALITY;
-
-	ret = s5k6aa_set_output_framefmt(s5k6aa, preset);
-	if (!ret)
-		ret = s5k6aa_write(client, REG_P_MAX_OUT_RATE(idx),
-				   s5k6aa->pclk_fmax);
-	if (!ret)
-		ret = s5k6aa_write(client, REG_P_MIN_OUT_RATE(idx),
-				   s5k6aa->pclk_fmin);
-	if (!ret)
-		ret = s5k6aa_write(client, REG_P_CLK_INDEX(idx),
-				   preset->clk_id);
-	if (!ret)
-		ret = s5k6aa_write(client, REG_P_FR_RATE_TYPE(idx),
-				   FR_RATE_DYNAMIC);
-	if (!ret)
-		ret = s5k6aa_write(client, REG_P_FR_RATE_Q_TYPE(idx),
-				   frame_rate_q);
-	if (!ret)
-		ret = s5k6aa_write(client, REG_P_MAX_FR_TIME(idx),
-				   s5k6aa->fiv->reg_fr_time + 33);
-	if (!ret)
-		ret = s5k6aa_write(client, REG_P_MIN_FR_TIME(idx),
-				   s5k6aa->fiv->reg_fr_time - 33);
-	if (!ret)
-		ret = s5k6aa_new_config_sync(client, 250, idx);
-	if (!ret)
-		ret = s5k6aa_preview_config_status(client);
-	if (!ret)
-		s5k6aa->apply_cfg = 0;
-
-	v4l2_dbg(1, debug, client, "Frame interval: %d +/- 3.3ms. (%d)\n",
-		 s5k6aa->fiv->reg_fr_time, ret);
-	return ret;
-}
-
-/**
- * s5k6aa_initialize_isp - basic ISP MCU initialization
- *
- * Configure AHB addresses for registers read/write; configure PLLs for
- * required output pixel clock. The ISP power supply needs to be already
- * enabled, with an optional H/W reset.
- * Locking: called with s5k6aa.lock mutex held.
- */
-static int s5k6aa_initialize_isp(struct v4l2_subdev *sd)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
-	int ret;
-
-	s5k6aa->apply_crop = 1;
-	s5k6aa->apply_cfg = 1;
-	msleep(100);
-
-	ret = s5k6aa_set_ahb_address(client);
-	if (ret)
-		return ret;
-	ret = s5k6aa_configure_video_bus(s5k6aa, s5k6aa->bus_type,
-					 s5k6aa->mipi_lanes);
-	if (ret)
-		return ret;
-	ret = s5k6aa_write_array(sd, s5k6aa_analog_config);
-	if (ret)
-		return ret;
-	msleep(20);
-
-	return s5k6aa_configure_pixel_clocks(s5k6aa);
-}
-
-static int s5k6aa_gpio_set_value(struct s5k6aa *priv, int id, u32 val)
-{
-	if (!gpio_is_valid(priv->gpio[id].gpio))
-		return 0;
-	gpio_set_value(priv->gpio[id].gpio, !!val);
-	return 1;
-}
-
-static int s5k6aa_gpio_assert(struct s5k6aa *priv, int id)
-{
-	return s5k6aa_gpio_set_value(priv, id, priv->gpio[id].level);
-}
-
-static int s5k6aa_gpio_deassert(struct s5k6aa *priv, int id)
-{
-	return s5k6aa_gpio_set_value(priv, id, !priv->gpio[id].level);
-}
-
-static int __s5k6aa_power_on(struct s5k6aa *s5k6aa)
-{
-	int ret;
-
-	ret = regulator_bulk_enable(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies);
-	if (ret)
-		return ret;
-	if (s5k6aa_gpio_deassert(s5k6aa, STBY))
-		usleep_range(150, 200);
-
-	if (s5k6aa->s_power)
-		ret = s5k6aa->s_power(1);
-	usleep_range(4000, 4000);
-
-	if (s5k6aa_gpio_deassert(s5k6aa, RST))
-		msleep(20);
-
-	return ret;
-}
-
-static int __s5k6aa_power_off(struct s5k6aa *s5k6aa)
-{
-	int ret;
-
-	if (s5k6aa_gpio_assert(s5k6aa, RST))
-		usleep_range(100, 150);
-
-	if (s5k6aa->s_power) {
-		ret = s5k6aa->s_power(0);
-		if (ret)
-			return ret;
-	}
-	if (s5k6aa_gpio_assert(s5k6aa, STBY))
-		usleep_range(50, 100);
-	s5k6aa->streaming = 0;
-
-	return regulator_bulk_disable(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies);
-}
-
-/*
- * V4L2 subdev core and video operations
- */
-static int s5k6aa_set_power(struct v4l2_subdev *sd, int on)
-{
-	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
-	int ret = 0;
-
-	mutex_lock(&s5k6aa->lock);
-
-	if (!on == s5k6aa->power) {
-		if (on) {
-			ret = __s5k6aa_power_on(s5k6aa);
-			if (!ret)
-				ret = s5k6aa_initialize_isp(sd);
-		} else {
-			ret = __s5k6aa_power_off(s5k6aa);
-		}
-
-		if (!ret)
-			s5k6aa->power += on ? 1 : -1;
-	}
-
-	mutex_unlock(&s5k6aa->lock);
-
-	if (!on || ret || s5k6aa->power != 1)
-		return ret;
-
-	return v4l2_ctrl_handler_setup(sd->ctrl_handler);
-}
-
-static int __s5k6aa_stream(struct s5k6aa *s5k6aa, int enable)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
-	int ret = 0;
-
-	ret = s5k6aa_write(client, REG_G_ENABLE_PREV, enable);
-	if (!ret)
-		ret = s5k6aa_write(client, REG_G_ENABLE_PREV_CHG, 1);
-	if (!ret)
-		s5k6aa->streaming = enable;
-
-	return ret;
-}
-
-static int s5k6aa_s_stream(struct v4l2_subdev *sd, int on)
-{
-	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
-	int ret = 0;
-
-	mutex_lock(&s5k6aa->lock);
-
-	if (s5k6aa->streaming == !on) {
-		if (!ret && s5k6aa->apply_cfg)
-			ret = s5k6aa_set_prev_config(s5k6aa, s5k6aa->preset);
-		if (s5k6aa->apply_crop)
-			ret = s5k6aa_set_input_params(s5k6aa);
-		if (!ret)
-			ret = __s5k6aa_stream(s5k6aa, !!on);
-	}
-	mutex_unlock(&s5k6aa->lock);
-
-	return ret;
-}
-
-static int s5k6aa_g_frame_interval(struct v4l2_subdev *sd,
-				   struct v4l2_subdev_frame_interval *fi)
-{
-	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
-
-	mutex_lock(&s5k6aa->lock);
-	fi->interval = s5k6aa->fiv->interval;
-	mutex_unlock(&s5k6aa->lock);
-
-	return 0;
-}
-
-static int __s5k6aa_set_frame_interval(struct s5k6aa *s5k6aa,
-				       struct v4l2_subdev_frame_interval *fi)
-{
-	struct v4l2_mbus_framefmt *mbus_fmt = &s5k6aa->preset->mbus_fmt;
-	const struct s5k6aa_interval *fiv = &s5k6aa_intervals[0];
-	unsigned int err, min_err = UINT_MAX;
-	unsigned int i, fr_time;
-
-	if (fi->interval.denominator == 0)
-		return -EINVAL;
-
-	fr_time = fi->interval.numerator * 10000 / fi->interval.denominator;
-
-	for (i = 0; i < ARRAY_SIZE(s5k6aa_intervals); i++) {
-		const struct s5k6aa_interval *iv = &s5k6aa_intervals[i];
-
-		if (mbus_fmt->width > iv->size.width ||
-		    mbus_fmt->height > iv->size.height)
-			continue;
-
-		err = abs(iv->reg_fr_time - fr_time);
-		if (err < min_err) {
-			fiv = iv;
-			min_err = err;
-		}
-	}
-	s5k6aa->fiv = fiv;
-
-	v4l2_dbg(1, debug, &s5k6aa->sd, "Changed frame interval to %d us\n",
-		 fiv->reg_fr_time * 100);
-	return 0;
-}
-
-static int s5k6aa_s_frame_interval(struct v4l2_subdev *sd,
-				   struct v4l2_subdev_frame_interval *fi)
-{
-	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
-	int ret;
-
-	v4l2_dbg(1, debug, sd, "Setting %d/%d frame interval\n",
-		 fi->interval.numerator, fi->interval.denominator);
-
-	mutex_lock(&s5k6aa->lock);
-	ret = __s5k6aa_set_frame_interval(s5k6aa, fi);
-	s5k6aa->apply_cfg = 1;
-
-	mutex_unlock(&s5k6aa->lock);
-	return ret;
-}
-
-/*
- * V4L2 subdev pad level and video operations
- */
-static int s5k6aa_enum_frame_interval(struct v4l2_subdev *sd,
-			      struct v4l2_subdev_fh *fh,
-			      struct v4l2_subdev_frame_interval_enum *fie)
-{
-	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
-	const struct s5k6aa_interval *fi;
-	int ret = 0;
-
-	if (fie->index > ARRAY_SIZE(s5k6aa_intervals))
-		return -EINVAL;
-
-	v4l_bound_align_image(&fie->width, S5K6AA_WIN_WIDTH_MIN,
-			      S5K6AA_WIN_WIDTH_MAX, 1,
-			      &fie->height, S5K6AA_WIN_HEIGHT_MIN,
-			      S5K6AA_WIN_HEIGHT_MAX, 1, 0);
-
-	mutex_lock(&s5k6aa->lock);
-	fi = &s5k6aa_intervals[fie->index];
-	if (fie->width > fi->size.width || fie->height > fi->size.height)
-		ret = -EINVAL;
-	else
-		fie->interval = fi->interval;
-	mutex_unlock(&s5k6aa->lock);
-
-	return ret;
-}
-
-static int s5k6aa_enum_mbus_code(struct v4l2_subdev *sd,
-				 struct v4l2_subdev_fh *fh,
-				 struct v4l2_subdev_mbus_code_enum *code)
-{
-	if (code->index >= ARRAY_SIZE(s5k6aa_formats))
-		return -EINVAL;
-
-	code->code = s5k6aa_formats[code->index].code;
-	return 0;
-}
-
-static int s5k6aa_enum_frame_size(struct v4l2_subdev *sd,
-				  struct v4l2_subdev_fh *fh,
-				  struct v4l2_subdev_frame_size_enum *fse)
-{
-	int i = ARRAY_SIZE(s5k6aa_formats);
-
-	if (fse->index > 0)
-		return -EINVAL;
-
-	while (--i)
-		if (fse->code == s5k6aa_formats[i].code)
-			break;
-
-	fse->code = s5k6aa_formats[i].code;
-	fse->min_width  = S5K6AA_WIN_WIDTH_MIN;
-	fse->max_width  = S5K6AA_WIN_WIDTH_MAX;
-	fse->max_height = S5K6AA_WIN_HEIGHT_MIN;
-	fse->min_height = S5K6AA_WIN_HEIGHT_MAX;
-
-	return 0;
-}
-
-static struct v4l2_rect *
-__s5k6aa_get_crop_rect(struct s5k6aa *s5k6aa, struct v4l2_subdev_fh *fh,
-		       enum v4l2_subdev_format_whence which)
-{
-	if (which == V4L2_SUBDEV_FORMAT_ACTIVE)
-		return &s5k6aa->ccd_rect;
-	if (which == V4L2_SUBDEV_FORMAT_TRY)
-		return v4l2_subdev_get_try_crop(fh, 0);
-
-	return NULL;
-}
-
-static void s5k6aa_try_format(struct s5k6aa *s5k6aa,
-			      struct v4l2_mbus_framefmt *mf)
-{
-	unsigned int index;
-
-	v4l_bound_align_image(&mf->width, S5K6AA_WIN_WIDTH_MIN,
-			      S5K6AA_WIN_WIDTH_MAX, 1,
-			      &mf->height, S5K6AA_WIN_HEIGHT_MIN,
-			      S5K6AA_WIN_HEIGHT_MAX, 1, 0);
-
-	if (mf->colorspace != V4L2_COLORSPACE_JPEG &&
-	    mf->colorspace != V4L2_COLORSPACE_REC709)
-		mf->colorspace = V4L2_COLORSPACE_JPEG;
-
-	index = s5k6aa_get_pixfmt_index(s5k6aa, mf);
-
-	mf->colorspace	= s5k6aa_formats[index].colorspace;
-	mf->code	= s5k6aa_formats[index].code;
-	mf->field	= V4L2_FIELD_NONE;
-}
-
-static int s5k6aa_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
-			  struct v4l2_subdev_format *fmt)
-{
-	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
-	struct v4l2_mbus_framefmt *mf;
-
-	memset(fmt->reserved, 0, sizeof(fmt->reserved));
-
-	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
-		mf = v4l2_subdev_get_try_format(fh, 0);
-		fmt->format = *mf;
-		return 0;
-	}
-
-	mutex_lock(&s5k6aa->lock);
-	fmt->format = s5k6aa->preset->mbus_fmt;
-	mutex_unlock(&s5k6aa->lock);
-
-	return 0;
-}
-
-static int s5k6aa_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
-			  struct v4l2_subdev_format *fmt)
-{
-	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
-	struct s5k6aa_preset *preset = s5k6aa->preset;
-	struct v4l2_mbus_framefmt *mf;
-	struct v4l2_rect *crop;
-	int ret = 0;
-
-	mutex_lock(&s5k6aa->lock);
-	s5k6aa_try_format(s5k6aa, &fmt->format);
-
-	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
-		mf = v4l2_subdev_get_try_format(fh, fmt->pad);
-		crop = v4l2_subdev_get_try_crop(fh, 0);
-	} else {
-		if (s5k6aa->streaming) {
-			ret = -EBUSY;
-		} else {
-			mf = &preset->mbus_fmt;
-			crop = &s5k6aa->ccd_rect;
-			s5k6aa->apply_cfg = 1;
-		}
-	}
-
-	if (ret == 0) {
-		struct v4l2_subdev_frame_interval fiv = {
-			.interval = {0, 1}
-		};
-
-		*mf = fmt->format;
-		/*
-		 * Make sure the crop window is valid, i.e. its size is
-		 * greater than the output window, as the ISP supports
-		 * only down-scaling.
-		 */
-		crop->width = clamp_t(unsigned int, crop->width, mf->width,
-				      S5K6AA_WIN_WIDTH_MAX);
-		crop->height = clamp_t(unsigned int, crop->height, mf->height,
-				       S5K6AA_WIN_HEIGHT_MAX);
-		crop->left = clamp_t(unsigned int, crop->left, 0,
-				     S5K6AA_WIN_WIDTH_MAX - crop->width);
-		crop->top  = clamp_t(unsigned int, crop->top, 0,
-				     S5K6AA_WIN_HEIGHT_MAX - crop->height);
-
-		/* Reset to minimum possible frame interval */
-		ret = __s5k6aa_set_frame_interval(s5k6aa, &fiv);
-	}
-	mutex_unlock(&s5k6aa->lock);
-
-	return ret;
-}
-
-static int s5k6aa_get_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
-			   struct v4l2_subdev_crop *crop)
-{
-	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
-	struct v4l2_rect *rect;
-
-	memset(crop->reserved, 0, sizeof(crop->reserved));
-	mutex_lock(&s5k6aa->lock);
-
-	rect = __s5k6aa_get_crop_rect(s5k6aa, fh, crop->which);
-	if (rect)
-		crop->rect = *rect;
-
-	mutex_unlock(&s5k6aa->lock);
-
-	v4l2_dbg(1, debug, sd, "Current crop rectangle: (%d,%d)/%dx%d\n",
-		 rect->left, rect->top, rect->width, rect->height);
-
-	return 0;
-}
-
-static int s5k6aa_set_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
-			   struct v4l2_subdev_crop *crop)
-{
-	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
-	struct v4l2_mbus_framefmt *mf;
-	unsigned int max_x, max_y;
-	struct v4l2_rect *crop_r;
-
-	mutex_lock(&s5k6aa->lock);
-	crop_r = __s5k6aa_get_crop_rect(s5k6aa, fh, crop->which);
-
-	if (crop->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		mf = &s5k6aa->preset->mbus_fmt;
-		s5k6aa->apply_crop = 1;
-	} else {
-		mf = v4l2_subdev_get_try_format(fh, 0);
-	}
-	v4l_bound_align_image(&crop->rect.width, mf->width,
-			      S5K6AA_WIN_WIDTH_MAX, 1,
-			      &crop->rect.height, mf->height,
-			      S5K6AA_WIN_HEIGHT_MAX, 1, 0);
-
-	max_x = (S5K6AA_WIN_WIDTH_MAX - crop->rect.width) & ~1;
-	max_y = (S5K6AA_WIN_HEIGHT_MAX - crop->rect.height) & ~1;
-
-	crop->rect.left = clamp_t(unsigned int, crop->rect.left, 0, max_x);
-	crop->rect.top  = clamp_t(unsigned int, crop->rect.top, 0, max_y);
-
-	*crop_r = crop->rect;
-
-	mutex_unlock(&s5k6aa->lock);
-
-	v4l2_dbg(1, debug, sd, "Set crop rectangle: (%d,%d)/%dx%d\n",
-		 crop_r->left, crop_r->top, crop_r->width, crop_r->height);
-
-	return 0;
-}
-
-static const struct v4l2_subdev_pad_ops s5k6aa_pad_ops = {
-	.enum_mbus_code		= s5k6aa_enum_mbus_code,
-	.enum_frame_size	= s5k6aa_enum_frame_size,
-	.enum_frame_interval	= s5k6aa_enum_frame_interval,
-	.get_fmt		= s5k6aa_get_fmt,
-	.set_fmt		= s5k6aa_set_fmt,
-	.get_crop		= s5k6aa_get_crop,
-	.set_crop		= s5k6aa_set_crop,
-};
-
-static const struct v4l2_subdev_video_ops s5k6aa_video_ops = {
-	.g_frame_interval	= s5k6aa_g_frame_interval,
-	.s_frame_interval	= s5k6aa_s_frame_interval,
-	.s_stream		= s5k6aa_s_stream,
-};
-
-/*
- * V4L2 subdev controls
- */
-
-static int s5k6aa_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
-	int idx, err = 0;
-
-	v4l2_dbg(1, debug, sd, "ctrl: 0x%x, value: %d\n", ctrl->id, ctrl->val);
-
-	mutex_lock(&s5k6aa->lock);
-	/*
-	 * If the device is not powered up by the host driver do
-	 * not apply any controls to H/W at this time. Instead
-	 * the controls will be restored right after power-up.
-	 */
-	if (s5k6aa->power == 0)
-		goto unlock;
-	idx = s5k6aa->preset->index;
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUTO_WHITE_BALANCE:
-		err = s5k6aa_set_awb(s5k6aa, ctrl->val);
-		break;
-
-	case V4L2_CID_BRIGHTNESS:
-		err = s5k6aa_write(client, REG_USER_BRIGHTNESS, ctrl->val);
-		break;
-
-	case V4L2_CID_COLORFX:
-		err = s5k6aa_set_colorfx(s5k6aa, ctrl->val);
-		break;
-
-	case V4L2_CID_CONTRAST:
-		err = s5k6aa_write(client, REG_USER_CONTRAST, ctrl->val);
-		break;
-
-	case V4L2_CID_EXPOSURE_AUTO:
-		err = s5k6aa_set_auto_exposure(s5k6aa, ctrl->val);
-		break;
-
-	case V4L2_CID_HFLIP:
-		err = s5k6aa_set_mirror(s5k6aa, ctrl->val);
-		if (err)
-			break;
-		err = s5k6aa_write(client, REG_G_PREV_CFG_CHG, 1);
-		break;
-
-	case V4L2_CID_POWER_LINE_FREQUENCY:
-		err = s5k6aa_set_anti_flicker(s5k6aa, ctrl->val);
-		break;
-
-	case V4L2_CID_SATURATION:
-		err = s5k6aa_write(client, REG_USER_SATURATION, ctrl->val);
-		break;
-
-	case V4L2_CID_SHARPNESS:
-		err = s5k6aa_write(client, REG_USER_SHARPBLUR, ctrl->val);
-		break;
-
-	case V4L2_CID_WHITE_BALANCE_TEMPERATURE:
-		err = s5k6aa_write(client, REG_P_COLORTEMP(idx), ctrl->val);
-		if (err)
-			break;
-		err = s5k6aa_write(client, REG_G_PREV_CFG_CHG, 1);
-		break;
-	}
-unlock:
-	mutex_unlock(&s5k6aa->lock);
-	return err;
-}
-
-static const struct v4l2_ctrl_ops s5k6aa_ctrl_ops = {
-	.s_ctrl	= s5k6aa_s_ctrl,
-};
-
-static int s5k6aa_log_status(struct v4l2_subdev *sd)
-{
-	v4l2_ctrl_handler_log_status(sd->ctrl_handler, sd->name);
-	return 0;
-}
-
-#define V4L2_CID_RED_GAIN	(V4L2_CTRL_CLASS_CAMERA | 0x1001)
-#define V4L2_CID_GREEN_GAIN	(V4L2_CTRL_CLASS_CAMERA | 0x1002)
-#define V4L2_CID_BLUE_GAIN	(V4L2_CTRL_CLASS_CAMERA | 0x1003)
-
-static const struct v4l2_ctrl_config s5k6aa_ctrls[] = {
-	{
-		.ops	= &s5k6aa_ctrl_ops,
-		.id	= V4L2_CID_RED_GAIN,
-		.type	= V4L2_CTRL_TYPE_INTEGER,
-		.name	= "Gain, Red",
-		.min	= 0,
-		.max	= 256,
-		.def	= 127,
-		.step	= 1,
-	}, {
-		.ops	= &s5k6aa_ctrl_ops,
-		.id	= V4L2_CID_GREEN_GAIN,
-		.type	= V4L2_CTRL_TYPE_INTEGER,
-		.name	= "Gain, Green",
-		.min	= 0,
-		.max	= 256,
-		.def	= 127,
-		.step	= 1,
-	}, {
-		.ops	= &s5k6aa_ctrl_ops,
-		.id	= V4L2_CID_BLUE_GAIN,
-		.type	= V4L2_CTRL_TYPE_INTEGER,
-		.name	= "Gain, Blue",
-		.min	= 0,
-		.max	= 256,
-		.def	= 127,
-		.step	= 1,
-	},
-};
-
-static int s5k6aa_initialize_ctrls(struct s5k6aa *s5k6aa)
-{
-	const struct v4l2_ctrl_ops *ops = &s5k6aa_ctrl_ops;
-	struct s5k6aa_ctrls *ctrls = &s5k6aa->ctrls;
-	struct v4l2_ctrl_handler *hdl = &ctrls->handler;
-
-	int ret = v4l2_ctrl_handler_init(hdl, 16);
-	if (ret)
-		return ret;
-	/* Auto white balance cluster */
-	ctrls->awb = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTO_WHITE_BALANCE,
-				       0, 1, 1, 1);
-	ctrls->gain_red = v4l2_ctrl_new_custom(hdl, &s5k6aa_ctrls[0], NULL);
-	ctrls->gain_green = v4l2_ctrl_new_custom(hdl, &s5k6aa_ctrls[1], NULL);
-	ctrls->gain_blue = v4l2_ctrl_new_custom(hdl, &s5k6aa_ctrls[2], NULL);
-	v4l2_ctrl_auto_cluster(4, &ctrls->awb, 0, false);
-
-	ctrls->hflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP, 0, 1, 1, 0);
-	ctrls->vflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP, 0, 1, 1, 0);
-	v4l2_ctrl_cluster(2, &ctrls->hflip);
-
-	ctrls->auto_exp = v4l2_ctrl_new_std_menu(hdl, ops,
-				V4L2_CID_EXPOSURE_AUTO,
-				V4L2_EXPOSURE_MANUAL, 0, V4L2_EXPOSURE_AUTO);
-	/* Exposure time: x 1 us */
-	ctrls->exposure = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE,
-					    0, 6000000U, 1, 100000U);
-	/* Total gain: 256 <=> 1x */
-	ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN,
-					0, 256, 1, 256);
-	v4l2_ctrl_auto_cluster(3, &ctrls->auto_exp, 0, false);
-
-	v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_POWER_LINE_FREQUENCY,
-			       V4L2_CID_POWER_LINE_FREQUENCY_AUTO, 0,
-			       V4L2_CID_POWER_LINE_FREQUENCY_AUTO);
-
-	v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_COLORFX,
-			       V4L2_COLORFX_SKY_BLUE, ~0x6f, V4L2_COLORFX_NONE);
-
-	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_WHITE_BALANCE_TEMPERATURE,
-			  0, 256, 1, 0);
-
-	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION, -127, 127, 1, 0);
-	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -127, 127, 1, 0);
-	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -127, 127, 1, 0);
-	v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS, -127, 127, 1, 0);
-
-	if (hdl->error) {
-		ret = hdl->error;
-		v4l2_ctrl_handler_free(hdl);
-		return ret;
-	}
-
-	s5k6aa->sd.ctrl_handler = hdl;
-	return 0;
-}
-
-/*
- * V4L2 subdev internal operations
- */
-static int s5k6aa_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-{
-	struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh, 0);
-	struct v4l2_rect *crop = v4l2_subdev_get_try_crop(fh, 0);
-
-	format->colorspace = s5k6aa_formats[0].colorspace;
-	format->code = s5k6aa_formats[0].code;
-	format->width = S5K6AA_OUT_WIDTH_DEF;
-	format->height = S5K6AA_OUT_HEIGHT_DEF;
-	format->field = V4L2_FIELD_NONE;
-
-	crop->width = S5K6AA_WIN_WIDTH_MAX;
-	crop->height = S5K6AA_WIN_HEIGHT_MAX;
-	crop->left = 0;
-	crop->top = 0;
-
-	return 0;
-}
-
-static int s5k6aa_check_fw_revision(struct s5k6aa *s5k6aa)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
-	u16 api_ver = 0, fw_rev = 0;
-
-	int ret = s5k6aa_set_ahb_address(client);
-
-	if (!ret)
-		ret = s5k6aa_read(client, REG_FW_APIVER, &api_ver);
-	if (!ret)
-		ret = s5k6aa_read(client, REG_FW_REVISION, &fw_rev);
-	if (ret) {
-		v4l2_err(&s5k6aa->sd, "FW revision check failed!\n");
-		return ret;
-	}
-
-	v4l2_info(&s5k6aa->sd, "FW API ver.: 0x%X, FW rev.: 0x%X\n",
-		  api_ver, fw_rev);
-
-	return api_ver == S5K6AAFX_FW_APIVER ? 0 : -ENODEV;
-}
-
-static int s5k6aa_registered(struct v4l2_subdev *sd)
-{
-	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
-	int ret;
-
-	mutex_lock(&s5k6aa->lock);
-	ret = __s5k6aa_power_on(s5k6aa);
-	if (!ret) {
-		msleep(100);
-		ret = s5k6aa_check_fw_revision(s5k6aa);
-		__s5k6aa_power_off(s5k6aa);
-	}
-	mutex_unlock(&s5k6aa->lock);
-
-	return ret;
-}
-
-static const struct v4l2_subdev_internal_ops s5k6aa_subdev_internal_ops = {
-	.registered = s5k6aa_registered,
-	.open = s5k6aa_open,
-};
-
-static const struct v4l2_subdev_core_ops s5k6aa_core_ops = {
-	.s_power = s5k6aa_set_power,
-	.log_status = s5k6aa_log_status,
-};
-
-static const struct v4l2_subdev_ops s5k6aa_subdev_ops = {
-	.core = &s5k6aa_core_ops,
-	.pad = &s5k6aa_pad_ops,
-	.video = &s5k6aa_video_ops,
-};
-
-/*
- * GPIO setup
- */
-static int s5k6aa_configure_gpio(int nr, int val, const char *name)
-{
-	unsigned long flags = val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-	int ret;
-
-	if (!gpio_is_valid(nr))
-		return 0;
-	ret = gpio_request_one(nr, flags, name);
-	if (!ret)
-		gpio_export(nr, 0);
-	return ret;
-}
-
-static void s5k6aa_free_gpios(struct s5k6aa *s5k6aa)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(s5k6aa->gpio); i++) {
-		if (!gpio_is_valid(s5k6aa->gpio[i].gpio))
-			continue;
-		gpio_free(s5k6aa->gpio[i].gpio);
-		s5k6aa->gpio[i].gpio = -EINVAL;
-	}
-}
-
-static int s5k6aa_configure_gpios(struct s5k6aa *s5k6aa,
-				  const struct s5k6aa_platform_data *pdata)
-{
-	const struct s5k6aa_gpio *gpio = &pdata->gpio_stby;
-	int ret;
-
-	s5k6aa->gpio[STBY].gpio = -EINVAL;
-	s5k6aa->gpio[RST].gpio  = -EINVAL;
-
-	ret = s5k6aa_configure_gpio(gpio->gpio, gpio->level, "S5K6AA_STBY");
-	if (ret) {
-		s5k6aa_free_gpios(s5k6aa);
-		return ret;
-	}
-	s5k6aa->gpio[STBY] = *gpio;
-	if (gpio_is_valid(gpio->gpio))
-		gpio_set_value(gpio->gpio, 0);
-
-	gpio = &pdata->gpio_reset;
-	ret = s5k6aa_configure_gpio(gpio->gpio, gpio->level, "S5K6AA_RST");
-	if (ret) {
-		s5k6aa_free_gpios(s5k6aa);
-		return ret;
-	}
-	s5k6aa->gpio[RST] = *gpio;
-	if (gpio_is_valid(gpio->gpio))
-		gpio_set_value(gpio->gpio, 0);
-
-	return 0;
-}
-
-static int s5k6aa_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	const struct s5k6aa_platform_data *pdata = client->dev.platform_data;
-	struct v4l2_subdev *sd;
-	struct s5k6aa *s5k6aa;
-	int i, ret;
-
-	if (pdata == NULL) {
-		dev_err(&client->dev, "Platform data not specified\n");
-		return -EINVAL;
-	}
-
-	if (pdata->mclk_frequency == 0) {
-		dev_err(&client->dev, "MCLK frequency not specified\n");
-		return -EINVAL;
-	}
-
-	s5k6aa = devm_kzalloc(&client->dev, sizeof(*s5k6aa), GFP_KERNEL);
-	if (!s5k6aa)
-		return -ENOMEM;
-
-	mutex_init(&s5k6aa->lock);
-
-	s5k6aa->mclk_frequency = pdata->mclk_frequency;
-	s5k6aa->bus_type = pdata->bus_type;
-	s5k6aa->mipi_lanes = pdata->nlanes;
-	s5k6aa->s_power	= pdata->set_power;
-	s5k6aa->inv_hflip = pdata->horiz_flip;
-	s5k6aa->inv_vflip = pdata->vert_flip;
-
-	sd = &s5k6aa->sd;
-	v4l2_i2c_subdev_init(sd, client, &s5k6aa_subdev_ops);
-	strlcpy(sd->name, DRIVER_NAME, sizeof(sd->name));
-
-	sd->internal_ops = &s5k6aa_subdev_internal_ops;
-	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
-
-	s5k6aa->pad.flags = MEDIA_PAD_FL_SOURCE;
-	sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR;
-	ret = media_entity_init(&sd->entity, 1, &s5k6aa->pad, 0);
-	if (ret)
-		return ret;
-
-	ret = s5k6aa_configure_gpios(s5k6aa, pdata);
-	if (ret)
-		goto out_err2;
-
-	for (i = 0; i < S5K6AA_NUM_SUPPLIES; i++)
-		s5k6aa->supplies[i].supply = s5k6aa_supply_names[i];
-
-	ret = regulator_bulk_get(&client->dev, S5K6AA_NUM_SUPPLIES,
-				 s5k6aa->supplies);
-	if (ret) {
-		dev_err(&client->dev, "Failed to get regulators\n");
-		goto out_err3;
-	}
-
-	ret = s5k6aa_initialize_ctrls(s5k6aa);
-	if (ret)
-		goto out_err4;
-
-	s5k6aa_presets_data_init(s5k6aa);
-
-	s5k6aa->ccd_rect.width = S5K6AA_WIN_WIDTH_MAX;
-	s5k6aa->ccd_rect.height	= S5K6AA_WIN_HEIGHT_MAX;
-	s5k6aa->ccd_rect.left = 0;
-	s5k6aa->ccd_rect.top = 0;
-
-	return 0;
-
-out_err4:
-	regulator_bulk_free(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies);
-out_err3:
-	s5k6aa_free_gpios(s5k6aa);
-out_err2:
-	media_entity_cleanup(&s5k6aa->sd.entity);
-	return ret;
-}
-
-static int s5k6aa_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct s5k6aa *s5k6aa = to_s5k6aa(sd);
-
-	v4l2_device_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(sd->ctrl_handler);
-	media_entity_cleanup(&sd->entity);
-	regulator_bulk_free(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies);
-	s5k6aa_free_gpios(s5k6aa);
-
-	return 0;
-}
-
-static const struct i2c_device_id s5k6aa_id[] = {
-	{ DRIVER_NAME, 0 },
-	{ },
-};
-MODULE_DEVICE_TABLE(i2c, s5k6aa_id);
-
-
-static struct i2c_driver s5k6aa_i2c_driver = {
-	.driver = {
-		.name = DRIVER_NAME
-	},
-	.probe		= s5k6aa_probe,
-	.remove		= s5k6aa_remove,
-	.id_table	= s5k6aa_id,
-};
-
-module_i2c_driver(s5k6aa_i2c_driver);
-
-MODULE_DESCRIPTION("Samsung S5K6AA(FX) SXGA camera driver");
-MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/saa6588.c b/drivers/media/video/saa6588.c
deleted file mode 100644
index 0caac50..0000000
--- a/drivers/media/video/saa6588.c
+++ /dev/null
@@ -1,542 +0,0 @@
-/*
-    Driver for SAA6588 RDS decoder
-
-    (c) 2005 Hans J. Koch
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/types.h>
-#include <linux/videodev2.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/poll.h>
-#include <linux/wait.h>
-#include <asm/uaccess.h>
-
-#include <media/saa6588.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-
-
-/* insmod options */
-static unsigned int debug;
-static unsigned int xtal;
-static unsigned int mmbs;
-static unsigned int plvl;
-static unsigned int bufblocks = 100;
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "enable debug messages");
-module_param(xtal, int, 0);
-MODULE_PARM_DESC(xtal, "select oscillator frequency (0..3), default 0");
-module_param(mmbs, int, 0);
-MODULE_PARM_DESC(mmbs, "enable MMBS mode: 0=off (default), 1=on");
-module_param(plvl, int, 0);
-MODULE_PARM_DESC(plvl, "select pause level (0..3), default 0");
-module_param(bufblocks, int, 0);
-MODULE_PARM_DESC(bufblocks, "number of buffered blocks, default 100");
-
-MODULE_DESCRIPTION("v4l2 driver module for SAA6588 RDS decoder");
-MODULE_AUTHOR("Hans J. Koch <koch@hjk-az.de>");
-
-MODULE_LICENSE("GPL");
-
-/* ---------------------------------------------------------------------- */
-
-#define UNSET       (-1U)
-#define PREFIX      "saa6588: "
-#define dprintk     if (debug) printk
-
-struct saa6588 {
-	struct v4l2_subdev sd;
-	struct delayed_work work;
-	spinlock_t lock;
-	unsigned char *buffer;
-	unsigned int buf_size;
-	unsigned int rd_index;
-	unsigned int wr_index;
-	unsigned int block_count;
-	unsigned char last_blocknum;
-	wait_queue_head_t read_queue;
-	int data_available_for_read;
-	u8 sync;
-};
-
-static inline struct saa6588 *to_saa6588(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct saa6588, sd);
-}
-
-/* ---------------------------------------------------------------------- */
-
-/*
- * SAA6588 defines
- */
-
-/* Initialization and mode control byte (0w) */
-
-/* bit 0+1 (DAC0/DAC1) */
-#define cModeStandard           0x00
-#define cModeFastPI             0x01
-#define cModeReducedRequest     0x02
-#define cModeInvalid            0x03
-
-/* bit 2 (RBDS) */
-#define cProcessingModeRDS      0x00
-#define cProcessingModeRBDS     0x04
-
-/* bit 3+4 (SYM0/SYM1) */
-#define cErrCorrectionNone      0x00
-#define cErrCorrection2Bits     0x08
-#define cErrCorrection5Bits     0x10
-#define cErrCorrectionNoneRBDS  0x18
-
-/* bit 5 (NWSY) */
-#define cSyncNormal             0x00
-#define cSyncRestart            0x20
-
-/* bit 6 (TSQD) */
-#define cSigQualityDetectOFF    0x00
-#define cSigQualityDetectON     0x40
-
-/* bit 7 (SQCM) */
-#define cSigQualityTriggered    0x00
-#define cSigQualityContinous    0x80
-
-/* Pause level and flywheel control byte (1w) */
-
-/* bits 0..5 (FEB0..FEB5) */
-#define cFlywheelMaxBlocksMask  0x3F
-#define cFlywheelDefault        0x20
-
-/* bits 6+7 (PL0/PL1) */
-#define cPauseLevel_11mV	0x00
-#define cPauseLevel_17mV        0x40
-#define cPauseLevel_27mV        0x80
-#define cPauseLevel_43mV        0xC0
-
-/* Pause time/oscillator frequency/quality detector control byte (1w) */
-
-/* bits 0..4 (SQS0..SQS4) */
-#define cQualityDetectSensMask  0x1F
-#define cQualityDetectDefault   0x0F
-
-/* bit 5 (SOSC) */
-#define cSelectOscFreqOFF	0x00
-#define cSelectOscFreqON	0x20
-
-/* bit 6+7 (PTF0/PTF1) */
-#define cOscFreq_4332kHz	0x00
-#define cOscFreq_8664kHz	0x40
-#define cOscFreq_12996kHz	0x80
-#define cOscFreq_17328kHz	0xC0
-
-/* ---------------------------------------------------------------------- */
-
-static int block_to_user_buf(struct saa6588 *s, unsigned char __user *user_buf)
-{
-	int i;
-
-	if (s->rd_index == s->wr_index) {
-		if (debug > 2)
-			dprintk(PREFIX "Read: buffer empty.\n");
-		return 0;
-	}
-
-	if (debug > 2) {
-		dprintk(PREFIX "Read: ");
-		for (i = s->rd_index; i < s->rd_index + 3; i++)
-			dprintk("0x%02x ", s->buffer[i]);
-	}
-
-	if (copy_to_user(user_buf, &s->buffer[s->rd_index], 3))
-		return -EFAULT;
-
-	s->rd_index += 3;
-	if (s->rd_index >= s->buf_size)
-		s->rd_index = 0;
-	s->block_count--;
-
-	if (debug > 2)
-		dprintk("%d blocks total.\n", s->block_count);
-
-	return 1;
-}
-
-static void read_from_buf(struct saa6588 *s, struct saa6588_command *a)
-{
-	unsigned long flags;
-
-	unsigned char __user *buf_ptr = a->buffer;
-	unsigned int i;
-	unsigned int rd_blocks;
-
-	a->result = 0;
-	if (!a->buffer)
-		return;
-
-	while (!s->data_available_for_read) {
-		int ret = wait_event_interruptible(s->read_queue,
-					     s->data_available_for_read);
-		if (ret == -ERESTARTSYS) {
-			a->result = -EINTR;
-			return;
-		}
-	}
-
-	spin_lock_irqsave(&s->lock, flags);
-	rd_blocks = a->block_count;
-	if (rd_blocks > s->block_count)
-		rd_blocks = s->block_count;
-
-	if (!rd_blocks) {
-		spin_unlock_irqrestore(&s->lock, flags);
-		return;
-	}
-
-	for (i = 0; i < rd_blocks; i++) {
-		if (block_to_user_buf(s, buf_ptr)) {
-			buf_ptr += 3;
-			a->result++;
-		} else
-			break;
-	}
-	a->result *= 3;
-	s->data_available_for_read = (s->block_count > 0);
-	spin_unlock_irqrestore(&s->lock, flags);
-}
-
-static void block_to_buf(struct saa6588 *s, unsigned char *blockbuf)
-{
-	unsigned int i;
-
-	if (debug > 3)
-		dprintk(PREFIX "New block: ");
-
-	for (i = 0; i < 3; ++i) {
-		if (debug > 3)
-			dprintk("0x%02x ", blockbuf[i]);
-		s->buffer[s->wr_index] = blockbuf[i];
-		s->wr_index++;
-	}
-
-	if (s->wr_index >= s->buf_size)
-		s->wr_index = 0;
-
-	if (s->wr_index == s->rd_index) {
-		s->rd_index += 3;
-		if (s->rd_index >= s->buf_size)
-			s->rd_index = 0;
-	} else
-		s->block_count++;
-
-	if (debug > 3)
-		dprintk("%d blocks total.\n", s->block_count);
-}
-
-static void saa6588_i2c_poll(struct saa6588 *s)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&s->sd);
-	unsigned long flags;
-	unsigned char tmpbuf[6];
-	unsigned char blocknum;
-	unsigned char tmp;
-
-	/* Although we only need 3 bytes, we have to read at least 6.
-	   SAA6588 returns garbage otherwise. */
-	if (6 != i2c_master_recv(client, &tmpbuf[0], 6)) {
-		if (debug > 1)
-			dprintk(PREFIX "read error!\n");
-		return;
-	}
-
-	s->sync = tmpbuf[0] & 0x10;
-	if (!s->sync)
-		return;
-	blocknum = tmpbuf[0] >> 5;
-	if (blocknum == s->last_blocknum) {
-		if (debug > 3)
-			dprintk("Saw block %d again.\n", blocknum);
-		return;
-	}
-
-	s->last_blocknum = blocknum;
-
-	/*
-	   Byte order according to v4l2 specification:
-
-	   Byte 0: Least Significant Byte of RDS Block
-	   Byte 1: Most Significant Byte of RDS Block
-	   Byte 2 Bit 7: Error bit. Indicates that an uncorrectable error
-	   occurred during reception of this block.
-	   Bit 6: Corrected bit. Indicates that an error was
-	   corrected for this data block.
-	   Bits 5-3: Same as bits 0-2.
-	   Bits 2-0: Block number.
-
-	   SAA6588 byte order is Status-MSB-LSB, so we have to swap the
-	   first and the last of the 3 bytes block.
-	 */
-
-	tmp = tmpbuf[2];
-	tmpbuf[2] = tmpbuf[0];
-	tmpbuf[0] = tmp;
-
-	/* Map 'Invalid block E' to 'Invalid Block' */
-	if (blocknum == 6)
-		blocknum = V4L2_RDS_BLOCK_INVALID;
-	/* And if are not in mmbs mode, then 'Block E' is also mapped
-	   to 'Invalid Block'. As far as I can tell MMBS is discontinued,
-	   and if there is ever a need to support E blocks, then please
-	   contact the linux-media mailinglist. */
-	else if (!mmbs && blocknum == 5)
-		blocknum = V4L2_RDS_BLOCK_INVALID;
-	tmp = blocknum;
-	tmp |= blocknum << 3;	/* Received offset == Offset Name (OK ?) */
-	if ((tmpbuf[2] & 0x03) == 0x03)
-		tmp |= V4L2_RDS_BLOCK_ERROR;	 /* uncorrectable error */
-	else if ((tmpbuf[2] & 0x03) != 0x00)
-		tmp |= V4L2_RDS_BLOCK_CORRECTED; /* corrected error */
-	tmpbuf[2] = tmp;	/* Is this enough ? Should we also check other bits ? */
-
-	spin_lock_irqsave(&s->lock, flags);
-	block_to_buf(s, tmpbuf);
-	spin_unlock_irqrestore(&s->lock, flags);
-	s->data_available_for_read = 1;
-	wake_up_interruptible(&s->read_queue);
-}
-
-static void saa6588_work(struct work_struct *work)
-{
-	struct saa6588 *s = container_of(work, struct saa6588, work.work);
-
-	saa6588_i2c_poll(s);
-	schedule_delayed_work(&s->work, msecs_to_jiffies(20));
-}
-
-static void saa6588_configure(struct saa6588 *s)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&s->sd);
-	unsigned char buf[3];
-	int rc;
-
-	buf[0] = cSyncRestart;
-	if (mmbs)
-		buf[0] |= cProcessingModeRBDS;
-
-	buf[1] = cFlywheelDefault;
-	switch (plvl) {
-	case 0:
-		buf[1] |= cPauseLevel_11mV;
-		break;
-	case 1:
-		buf[1] |= cPauseLevel_17mV;
-		break;
-	case 2:
-		buf[1] |= cPauseLevel_27mV;
-		break;
-	case 3:
-		buf[1] |= cPauseLevel_43mV;
-		break;
-	default:		/* nothing */
-		break;
-	}
-
-	buf[2] = cQualityDetectDefault | cSelectOscFreqON;
-
-	switch (xtal) {
-	case 0:
-		buf[2] |= cOscFreq_4332kHz;
-		break;
-	case 1:
-		buf[2] |= cOscFreq_8664kHz;
-		break;
-	case 2:
-		buf[2] |= cOscFreq_12996kHz;
-		break;
-	case 3:
-		buf[2] |= cOscFreq_17328kHz;
-		break;
-	default:		/* nothing */
-		break;
-	}
-
-	dprintk(PREFIX "writing: 0w=0x%02x 1w=0x%02x 2w=0x%02x\n",
-		buf[0], buf[1], buf[2]);
-
-	rc = i2c_master_send(client, buf, 3);
-	if (rc != 3)
-		printk(PREFIX "i2c i/o error: rc == %d (should be 3)\n", rc);
-}
-
-/* ---------------------------------------------------------------------- */
-
-static long saa6588_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
-{
-	struct saa6588 *s = to_saa6588(sd);
-	struct saa6588_command *a = arg;
-
-	switch (cmd) {
-		/* --- open() for /dev/radio --- */
-	case SAA6588_CMD_OPEN:
-		a->result = 0;	/* return error if chip doesn't work ??? */
-		break;
-		/* --- close() for /dev/radio --- */
-	case SAA6588_CMD_CLOSE:
-		s->data_available_for_read = 1;
-		wake_up_interruptible(&s->read_queue);
-		a->result = 0;
-		break;
-		/* --- read() for /dev/radio --- */
-	case SAA6588_CMD_READ:
-		read_from_buf(s, a);
-		break;
-		/* --- poll() for /dev/radio --- */
-	case SAA6588_CMD_POLL:
-		a->result = 0;
-		if (s->data_available_for_read) {
-			a->result |= POLLIN | POLLRDNORM;
-		}
-		poll_wait(a->instance, &s->read_queue, a->event_list);
-		break;
-
-	default:
-		/* nothing */
-		return -ENOIOCTLCMD;
-	}
-	return 0;
-}
-
-static int saa6588_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
-{
-	struct saa6588 *s = to_saa6588(sd);
-
-	vt->capability |= V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_BLOCK_IO;
-	if (s->sync)
-		vt->rxsubchans |= V4L2_TUNER_SUB_RDS;
-	return 0;
-}
-
-static int saa6588_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
-{
-	struct saa6588 *s = to_saa6588(sd);
-
-	saa6588_configure(s);
-	return 0;
-}
-
-static int saa6588_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SAA6588, 0);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops saa6588_core_ops = {
-	.g_chip_ident = saa6588_g_chip_ident,
-	.ioctl = saa6588_ioctl,
-};
-
-static const struct v4l2_subdev_tuner_ops saa6588_tuner_ops = {
-	.g_tuner = saa6588_g_tuner,
-	.s_tuner = saa6588_s_tuner,
-};
-
-static const struct v4l2_subdev_ops saa6588_ops = {
-	.core = &saa6588_core_ops,
-	.tuner = &saa6588_tuner_ops,
-};
-
-/* ---------------------------------------------------------------------- */
-
-static int saa6588_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
-{
-	struct saa6588 *s;
-	struct v4l2_subdev *sd;
-
-	v4l_info(client, "saa6588 found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	s = kzalloc(sizeof(*s), GFP_KERNEL);
-	if (s == NULL)
-		return -ENOMEM;
-
-	s->buf_size = bufblocks * 3;
-
-	s->buffer = kmalloc(s->buf_size, GFP_KERNEL);
-	if (s->buffer == NULL) {
-		kfree(s);
-		return -ENOMEM;
-	}
-	sd = &s->sd;
-	v4l2_i2c_subdev_init(sd, client, &saa6588_ops);
-	spin_lock_init(&s->lock);
-	s->block_count = 0;
-	s->wr_index = 0;
-	s->rd_index = 0;
-	s->last_blocknum = 0xff;
-	init_waitqueue_head(&s->read_queue);
-	s->data_available_for_read = 0;
-
-	saa6588_configure(s);
-
-	/* start polling via eventd */
-	INIT_DELAYED_WORK(&s->work, saa6588_work);
-	schedule_delayed_work(&s->work, 0);
-	return 0;
-}
-
-static int saa6588_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct saa6588 *s = to_saa6588(sd);
-
-	v4l2_device_unregister_subdev(sd);
-
-	cancel_delayed_work_sync(&s->work);
-
-	kfree(s->buffer);
-	kfree(s);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct i2c_device_id saa6588_id[] = {
-	{ "saa6588", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, saa6588_id);
-
-static struct i2c_driver saa6588_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "saa6588",
-	},
-	.probe		= saa6588_probe,
-	.remove		= saa6588_remove,
-	.id_table	= saa6588_id,
-};
-
-module_i2c_driver(saa6588_driver);
diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c
deleted file mode 100644
index 51cd4c8..0000000
--- a/drivers/media/video/saa7110.c
+++ /dev/null
@@ -1,494 +0,0 @@
-/*
- * saa7110 - Philips SAA7110(A) video decoder driver
- *
- * Copyright (C) 1998 Pauline Middelink <middelin@polyware.nl>
- *
- * Copyright (C) 1999 Wolfgang Scherr <scherr@net4you.net>
- * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
- *    - some corrections for Pinnacle Systems Inc. DC10plus card.
- *
- * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net>
- *    - moved over to linux>=2.4.x i2c protocol (1/1/2003)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/wait.h>
-#include <asm/uaccess.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-ctrls.h>
-
-MODULE_DESCRIPTION("Philips SAA7110 video decoder driver");
-MODULE_AUTHOR("Pauline Middelink");
-MODULE_LICENSE("GPL");
-
-
-static int debug;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
-
-#define SAA7110_MAX_INPUT	9	/* 6 CVBS, 3 SVHS */
-#define SAA7110_MAX_OUTPUT	1	/* 1 YUV */
-
-#define SAA7110_NR_REG		0x35
-
-struct saa7110 {
-	struct v4l2_subdev sd;
-	struct v4l2_ctrl_handler hdl;
-	u8 reg[SAA7110_NR_REG];
-
-	v4l2_std_id norm;
-	int input;
-	int enable;
-
-	wait_queue_head_t wq;
-};
-
-static inline struct saa7110 *to_saa7110(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct saa7110, sd);
-}
-
-static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
-{
-	return &container_of(ctrl->handler, struct saa7110, hdl)->sd;
-}
-
-/* ----------------------------------------------------------------------- */
-/* I2C support functions						   */
-/* ----------------------------------------------------------------------- */
-
-static int saa7110_write(struct v4l2_subdev *sd, u8 reg, u8 value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct saa7110 *decoder = to_saa7110(sd);
-
-	decoder->reg[reg] = value;
-	return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-static int saa7110_write_block(struct v4l2_subdev *sd, const u8 *data, unsigned int len)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct saa7110 *decoder = to_saa7110(sd);
-	int ret = -1;
-	u8 reg = *data;		/* first register to write to */
-
-	/* Sanity check */
-	if (reg + (len - 1) > SAA7110_NR_REG)
-		return ret;
-
-	/* the saa7110 has an autoincrement function, use it if
-	 * the adapter understands raw I2C */
-	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
-		ret = i2c_master_send(client, data, len);
-
-		/* Cache the written data */
-		memcpy(decoder->reg + reg, data + 1, len - 1);
-	} else {
-		for (++data, --len; len; len--) {
-			ret = saa7110_write(sd, reg++, *data++);
-			if (ret < 0)
-				break;
-		}
-	}
-
-	return ret;
-}
-
-static inline int saa7110_read(struct v4l2_subdev *sd)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return i2c_smbus_read_byte(client);
-}
-
-/* ----------------------------------------------------------------------- */
-/* SAA7110 functions							   */
-/* ----------------------------------------------------------------------- */
-
-#define FRESP_06H_COMPST 0x03	/*0x13*/
-#define FRESP_06H_SVIDEO 0x83	/*0xC0*/
-
-
-static int saa7110_selmux(struct v4l2_subdev *sd, int chan)
-{
-	static const unsigned char modes[9][8] = {
-		/* mode 0 */
-		{FRESP_06H_COMPST, 0xD9, 0x17, 0x40, 0x03,
-			      0x44, 0x75, 0x16},
-		/* mode 1 */
-		{FRESP_06H_COMPST, 0xD8, 0x17, 0x40, 0x03,
-			      0x44, 0x75, 0x16},
-		/* mode 2 */
-		{FRESP_06H_COMPST, 0xBA, 0x07, 0x91, 0x03,
-			      0x60, 0xB5, 0x05},
-		/* mode 3 */
-		{FRESP_06H_COMPST, 0xB8, 0x07, 0x91, 0x03,
-			      0x60, 0xB5, 0x05},
-		/* mode 4 */
-		{FRESP_06H_COMPST, 0x7C, 0x07, 0xD2, 0x83,
-			      0x60, 0xB5, 0x03},
-		/* mode 5 */
-		{FRESP_06H_COMPST, 0x78, 0x07, 0xD2, 0x83,
-			      0x60, 0xB5, 0x03},
-		/* mode 6 */
-		{FRESP_06H_SVIDEO, 0x59, 0x17, 0x42, 0xA3,
-			      0x44, 0x75, 0x12},
-		/* mode 7 */
-		{FRESP_06H_SVIDEO, 0x9A, 0x17, 0xB1, 0x13,
-			      0x60, 0xB5, 0x14},
-		/* mode 8 */
-		{FRESP_06H_SVIDEO, 0x3C, 0x27, 0xC1, 0x23,
-			      0x44, 0x75, 0x21}
-	};
-	struct saa7110 *decoder = to_saa7110(sd);
-	const unsigned char *ptr = modes[chan];
-
-	saa7110_write(sd, 0x06, ptr[0]);	/* Luminance control    */
-	saa7110_write(sd, 0x20, ptr[1]);	/* Analog Control #1    */
-	saa7110_write(sd, 0x21, ptr[2]);	/* Analog Control #2    */
-	saa7110_write(sd, 0x22, ptr[3]);	/* Mixer Control #1     */
-	saa7110_write(sd, 0x2C, ptr[4]);	/* Mixer Control #2     */
-	saa7110_write(sd, 0x30, ptr[5]);	/* ADCs gain control    */
-	saa7110_write(sd, 0x31, ptr[6]);	/* Mixer Control #3     */
-	saa7110_write(sd, 0x21, ptr[7]);	/* Analog Control #2    */
-	decoder->input = chan;
-
-	return 0;
-}
-
-static const unsigned char initseq[1 + SAA7110_NR_REG] = {
-	0, 0x4C, 0x3C, 0x0D, 0xEF, 0xBD, 0xF2, 0x03, 0x00,
-	/* 0x08 */ 0xF8, 0xF8, 0x60, 0x60, 0x00, 0x86, 0x18, 0x90,
-	/* 0x10 */ 0x00, 0x59, 0x40, 0x46, 0x42, 0x1A, 0xFF, 0xDA,
-	/* 0x18 */ 0xF2, 0x8B, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* 0x20 */ 0xD9, 0x16, 0x40, 0x41, 0x80, 0x41, 0x80, 0x4F,
-	/* 0x28 */ 0xFE, 0x01, 0xCF, 0x0F, 0x03, 0x01, 0x03, 0x0C,
-	/* 0x30 */ 0x44, 0x71, 0x02, 0x8C, 0x02
-};
-
-static v4l2_std_id determine_norm(struct v4l2_subdev *sd)
-{
-	DEFINE_WAIT(wait);
-	struct saa7110 *decoder = to_saa7110(sd);
-	int status;
-
-	/* mode changed, start automatic detection */
-	saa7110_write_block(sd, initseq, sizeof(initseq));
-	saa7110_selmux(sd, decoder->input);
-	prepare_to_wait(&decoder->wq, &wait, TASK_UNINTERRUPTIBLE);
-	schedule_timeout(msecs_to_jiffies(250));
-	finish_wait(&decoder->wq, &wait);
-	status = saa7110_read(sd);
-	if (status & 0x40) {
-		v4l2_dbg(1, debug, sd, "status=0x%02x (no signal)\n", status);
-		return decoder->norm;	/* no change*/
-	}
-	if ((status & 3) == 0) {
-		saa7110_write(sd, 0x06, 0x83);
-		if (status & 0x20) {
-			v4l2_dbg(1, debug, sd, "status=0x%02x (NTSC/no color)\n", status);
-			/*saa7110_write(sd,0x2E,0x81);*/
-			return V4L2_STD_NTSC;
-		}
-		v4l2_dbg(1, debug, sd, "status=0x%02x (PAL/no color)\n", status);
-		/*saa7110_write(sd,0x2E,0x9A);*/
-		return V4L2_STD_PAL;
-	}
-	/*saa7110_write(sd,0x06,0x03);*/
-	if (status & 0x20) {	/* 60Hz */
-		v4l2_dbg(1, debug, sd, "status=0x%02x (NTSC)\n", status);
-		saa7110_write(sd, 0x0D, 0x86);
-		saa7110_write(sd, 0x0F, 0x50);
-		saa7110_write(sd, 0x11, 0x2C);
-		/*saa7110_write(sd,0x2E,0x81);*/
-		return V4L2_STD_NTSC;
-	}
-
-	/* 50Hz -> PAL/SECAM */
-	saa7110_write(sd, 0x0D, 0x86);
-	saa7110_write(sd, 0x0F, 0x10);
-	saa7110_write(sd, 0x11, 0x59);
-	/*saa7110_write(sd,0x2E,0x9A);*/
-
-	prepare_to_wait(&decoder->wq, &wait, TASK_UNINTERRUPTIBLE);
-	schedule_timeout(msecs_to_jiffies(250));
-	finish_wait(&decoder->wq, &wait);
-
-	status = saa7110_read(sd);
-	if ((status & 0x03) == 0x01) {
-		v4l2_dbg(1, debug, sd, "status=0x%02x (SECAM)\n", status);
-		saa7110_write(sd, 0x0D, 0x87);
-		return V4L2_STD_SECAM;
-	}
-	v4l2_dbg(1, debug, sd, "status=0x%02x (PAL)\n", status);
-	return V4L2_STD_PAL;
-}
-
-static int saa7110_g_input_status(struct v4l2_subdev *sd, u32 *pstatus)
-{
-	struct saa7110 *decoder = to_saa7110(sd);
-	int res = V4L2_IN_ST_NO_SIGNAL;
-	int status = saa7110_read(sd);
-
-	v4l2_dbg(1, debug, sd, "status=0x%02x norm=%llx\n",
-		       status, (unsigned long long)decoder->norm);
-	if (!(status & 0x40))
-		res = 0;
-	if (!(status & 0x03))
-		res |= V4L2_IN_ST_NO_COLOR;
-
-	*pstatus = res;
-	return 0;
-}
-
-static int saa7110_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
-{
-	*(v4l2_std_id *)std = determine_norm(sd);
-	return 0;
-}
-
-static int saa7110_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct saa7110 *decoder = to_saa7110(sd);
-
-	if (decoder->norm != std) {
-		decoder->norm = std;
-		/*saa7110_write(sd, 0x06, 0x03);*/
-		if (std & V4L2_STD_NTSC) {
-			saa7110_write(sd, 0x0D, 0x86);
-			saa7110_write(sd, 0x0F, 0x50);
-			saa7110_write(sd, 0x11, 0x2C);
-			/*saa7110_write(sd, 0x2E, 0x81);*/
-			v4l2_dbg(1, debug, sd, "switched to NTSC\n");
-		} else if (std & V4L2_STD_PAL) {
-			saa7110_write(sd, 0x0D, 0x86);
-			saa7110_write(sd, 0x0F, 0x10);
-			saa7110_write(sd, 0x11, 0x59);
-			/*saa7110_write(sd, 0x2E, 0x9A);*/
-			v4l2_dbg(1, debug, sd, "switched to PAL\n");
-		} else if (std & V4L2_STD_SECAM) {
-			saa7110_write(sd, 0x0D, 0x87);
-			saa7110_write(sd, 0x0F, 0x10);
-			saa7110_write(sd, 0x11, 0x59);
-			/*saa7110_write(sd, 0x2E, 0x9A);*/
-			v4l2_dbg(1, debug, sd, "switched to SECAM\n");
-		} else {
-			return -EINVAL;
-		}
-	}
-	return 0;
-}
-
-static int saa7110_s_routing(struct v4l2_subdev *sd,
-			     u32 input, u32 output, u32 config)
-{
-	struct saa7110 *decoder = to_saa7110(sd);
-
-	if (input >= SAA7110_MAX_INPUT) {
-		v4l2_dbg(1, debug, sd, "input=%d not available\n", input);
-		return -EINVAL;
-	}
-	if (decoder->input != input) {
-		saa7110_selmux(sd, input);
-		v4l2_dbg(1, debug, sd, "switched to input=%d\n", input);
-	}
-	return 0;
-}
-
-static int saa7110_s_stream(struct v4l2_subdev *sd, int enable)
-{
-	struct saa7110 *decoder = to_saa7110(sd);
-
-	if (decoder->enable != enable) {
-		decoder->enable = enable;
-		saa7110_write(sd, 0x0E, enable ? 0x18 : 0x80);
-		v4l2_dbg(1, debug, sd, "YUV %s\n", enable ? "on" : "off");
-	}
-	return 0;
-}
-
-static int saa7110_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		saa7110_write(sd, 0x19, ctrl->val);
-		break;
-	case V4L2_CID_CONTRAST:
-		saa7110_write(sd, 0x13, ctrl->val);
-		break;
-	case V4L2_CID_SATURATION:
-		saa7110_write(sd, 0x12, ctrl->val);
-		break;
-	case V4L2_CID_HUE:
-		saa7110_write(sd, 0x07, ctrl->val);
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int saa7110_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SAA7110, 0);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_ctrl_ops saa7110_ctrl_ops = {
-	.s_ctrl = saa7110_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops saa7110_core_ops = {
-	.g_chip_ident = saa7110_g_chip_ident,
-	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
-	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
-	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
-	.g_ctrl = v4l2_subdev_g_ctrl,
-	.s_ctrl = v4l2_subdev_s_ctrl,
-	.queryctrl = v4l2_subdev_queryctrl,
-	.querymenu = v4l2_subdev_querymenu,
-	.s_std = saa7110_s_std,
-};
-
-static const struct v4l2_subdev_video_ops saa7110_video_ops = {
-	.s_routing = saa7110_s_routing,
-	.s_stream = saa7110_s_stream,
-	.querystd = saa7110_querystd,
-	.g_input_status = saa7110_g_input_status,
-};
-
-static const struct v4l2_subdev_ops saa7110_ops = {
-	.core = &saa7110_core_ops,
-	.video = &saa7110_video_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static int saa7110_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	struct saa7110 *decoder;
-	struct v4l2_subdev *sd;
-	int rv;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter,
-		I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
-		return -ENODEV;
-
-	v4l_info(client, "chip found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	decoder = kzalloc(sizeof(struct saa7110), GFP_KERNEL);
-	if (!decoder)
-		return -ENOMEM;
-	sd = &decoder->sd;
-	v4l2_i2c_subdev_init(sd, client, &saa7110_ops);
-	decoder->norm = V4L2_STD_PAL;
-	decoder->input = 0;
-	decoder->enable = 1;
-	v4l2_ctrl_handler_init(&decoder->hdl, 2);
-	v4l2_ctrl_new_std(&decoder->hdl, &saa7110_ctrl_ops,
-		V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
-	v4l2_ctrl_new_std(&decoder->hdl, &saa7110_ctrl_ops,
-		V4L2_CID_CONTRAST, 0, 127, 1, 64);
-	v4l2_ctrl_new_std(&decoder->hdl, &saa7110_ctrl_ops,
-		V4L2_CID_SATURATION, 0, 127, 1, 64);
-	v4l2_ctrl_new_std(&decoder->hdl, &saa7110_ctrl_ops,
-		V4L2_CID_HUE, -128, 127, 1, 0);
-	sd->ctrl_handler = &decoder->hdl;
-	if (decoder->hdl.error) {
-		int err = decoder->hdl.error;
-
-		v4l2_ctrl_handler_free(&decoder->hdl);
-		kfree(decoder);
-		return err;
-	}
-	v4l2_ctrl_handler_setup(&decoder->hdl);
-
-	init_waitqueue_head(&decoder->wq);
-
-	rv = saa7110_write_block(sd, initseq, sizeof(initseq));
-	if (rv < 0) {
-		v4l2_dbg(1, debug, sd, "init status %d\n", rv);
-	} else {
-		int ver, status;
-		saa7110_write(sd, 0x21, 0x10);
-		saa7110_write(sd, 0x0e, 0x18);
-		saa7110_write(sd, 0x0D, 0x04);
-		ver = saa7110_read(sd);
-		saa7110_write(sd, 0x0D, 0x06);
-		/*mdelay(150);*/
-		status = saa7110_read(sd);
-		v4l2_dbg(1, debug, sd, "version %x, status=0x%02x\n",
-			       ver, status);
-		saa7110_write(sd, 0x0D, 0x86);
-		saa7110_write(sd, 0x0F, 0x10);
-		saa7110_write(sd, 0x11, 0x59);
-		/*saa7110_write(sd, 0x2E, 0x9A);*/
-	}
-
-	/*saa7110_selmux(sd,0);*/
-	/*determine_norm(sd);*/
-	/* setup and implicit mode 0 select has been performed */
-
-	return 0;
-}
-
-static int saa7110_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct saa7110 *decoder = to_saa7110(sd);
-
-	v4l2_device_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(&decoder->hdl);
-	kfree(decoder);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct i2c_device_id saa7110_id[] = {
-	{ "saa7110", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, saa7110_id);
-
-static struct i2c_driver saa7110_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "saa7110",
-	},
-	.probe		= saa7110_probe,
-	.remove		= saa7110_remove,
-	.id_table	= saa7110_id,
-};
-
-module_i2c_driver(saa7110_driver);
diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
deleted file mode 100644
index 2107336..0000000
--- a/drivers/media/video/saa7115.c
+++ /dev/null
@@ -1,1727 +0,0 @@
-/* saa711x - Philips SAA711x video decoder driver
- * This driver can work with saa7111, saa7111a, saa7113, saa7114,
- *			     saa7115 and saa7118.
- *
- * Based on saa7114 driver by Maxim Yevtyushkin, which is based on
- * the saa7111 driver by Dave Perks.
- *
- * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
- * Copyright (C) 2002 Maxim Yevtyushkin <max@linuxmedialabs.com>
- *
- * Slight changes for video timing and attachment output by
- * Wolfgang Scherr <scherr@net4you.net>
- *
- * Moved over to the linux >= 2.4.x i2c protocol (1/1/2003)
- * by Ronald Bultje <rbultje@ronald.bitfreak.net>
- *
- * Added saa7115 support by Kevin Thayer <nufan_wfk at yahoo.com>
- * (2/17/2003)
- *
- * VBI support (2004) and cleanups (2005) by Hans Verkuil <hverkuil@xs4all.nl>
- *
- * Copyright (c) 2005-2006 Mauro Carvalho Chehab <mchehab@infradead.org>
- *	SAA7111, SAA7113 and SAA7118 support
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- */
-
-#include "saa711x_regs.h"
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/saa7115.h>
-#include <asm/div64.h>
-
-#define VRES_60HZ	(480+16)
-
-MODULE_DESCRIPTION("Philips SAA7111/SAA7113/SAA7114/SAA7115/SAA7118 video decoder driver");
-MODULE_AUTHOR(  "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, "
-		"Hans Verkuil, Mauro Carvalho Chehab");
-MODULE_LICENSE("GPL");
-
-static bool debug;
-module_param(debug, bool, 0644);
-
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
-
-
-struct saa711x_state {
-	struct v4l2_subdev sd;
-	struct v4l2_ctrl_handler hdl;
-
-	struct {
-		/* chroma gain control cluster */
-		struct v4l2_ctrl *agc;
-		struct v4l2_ctrl *gain;
-	};
-
-	v4l2_std_id std;
-	int input;
-	int output;
-	int enable;
-	int radio;
-	int width;
-	int height;
-	u32 ident;
-	u32 audclk_freq;
-	u32 crystal_freq;
-	u8 ucgc;
-	u8 cgcdiv;
-	u8 apll;
-};
-
-static inline struct saa711x_state *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct saa711x_state, sd);
-}
-
-static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
-{
-	return &container_of(ctrl->handler, struct saa711x_state, hdl)->sd;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static inline int saa711x_write(struct v4l2_subdev *sd, u8 reg, u8 value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-/* Sanity routine to check if a register is present */
-static int saa711x_has_reg(const int id, const u8 reg)
-{
-	if (id == V4L2_IDENT_SAA7111)
-		return reg < 0x20 && reg != 0x01 && reg != 0x0f &&
-		       (reg < 0x13 || reg > 0x19) && reg != 0x1d && reg != 0x1e;
-	if (id == V4L2_IDENT_SAA7111A)
-		return reg < 0x20 && reg != 0x01 && reg != 0x0f &&
-		       reg != 0x14 && reg != 0x18 && reg != 0x19 &&
-		       reg != 0x1d && reg != 0x1e;
-
-	/* common for saa7113/4/5/8 */
-	if (unlikely((reg >= 0x3b && reg <= 0x3f) || reg == 0x5c || reg == 0x5f ||
-	    reg == 0xa3 || reg == 0xa7 || reg == 0xab || reg == 0xaf || (reg >= 0xb5 && reg <= 0xb7) ||
-	    reg == 0xd3 || reg == 0xd7 || reg == 0xdb || reg == 0xdf || (reg >= 0xe5 && reg <= 0xe7) ||
-	    reg == 0x82 || (reg >= 0x89 && reg <= 0x8e)))
-		return 0;
-
-	switch (id) {
-	case V4L2_IDENT_SAA7113:
-		return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && (reg < 0x20 || reg > 0x3f) &&
-		       reg != 0x5d && reg < 0x63;
-	case V4L2_IDENT_SAA7114:
-		return (reg < 0x1a || reg > 0x1e) && (reg < 0x20 || reg > 0x2f) &&
-		       (reg < 0x63 || reg > 0x7f) && reg != 0x33 && reg != 0x37 &&
-		       reg != 0x81 && reg < 0xf0;
-	case V4L2_IDENT_SAA7115:
-		return (reg < 0x20 || reg > 0x2f) && reg != 0x65 && (reg < 0xfc || reg > 0xfe);
-	case V4L2_IDENT_SAA7118:
-		return (reg < 0x1a || reg > 0x1d) && (reg < 0x20 || reg > 0x22) &&
-		       (reg < 0x26 || reg > 0x28) && reg != 0x33 && reg != 0x37 &&
-		       (reg < 0x63 || reg > 0x7f) && reg != 0x81 && reg < 0xf0;
-	}
-	return 1;
-}
-
-static int saa711x_writeregs(struct v4l2_subdev *sd, const unsigned char *regs)
-{
-	struct saa711x_state *state = to_state(sd);
-	unsigned char reg, data;
-
-	while (*regs != 0x00) {
-		reg = *(regs++);
-		data = *(regs++);
-
-		/* According with datasheets, reserved regs should be
-		   filled with 0 - seems better not to touch on they */
-		if (saa711x_has_reg(state->ident, reg)) {
-			if (saa711x_write(sd, reg, data) < 0)
-				return -1;
-		} else {
-			v4l2_dbg(1, debug, sd, "tried to access reserved reg 0x%02x\n", reg);
-		}
-	}
-	return 0;
-}
-
-static inline int saa711x_read(struct v4l2_subdev *sd, u8 reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return i2c_smbus_read_byte_data(client, reg);
-}
-
-/* ----------------------------------------------------------------------- */
-
-/* SAA7111 initialization table */
-static const unsigned char saa7111_init[] = {
-	R_01_INC_DELAY, 0x00,		/* reserved */
-
-	/*front end */
-	R_02_INPUT_CNTL_1, 0xd0,	/* FUSE=3, GUDL=2, MODE=0 */
-	R_03_INPUT_CNTL_2, 0x23,	/* HLNRS=0, VBSL=1, WPOFF=0, HOLDG=0,
-					 * GAFIX=0, GAI1=256, GAI2=256 */
-	R_04_INPUT_CNTL_3, 0x00,	/* GAI1=256 */
-	R_05_INPUT_CNTL_4, 0x00,	/* GAI2=256 */
-
-	/* decoder */
-	R_06_H_SYNC_START, 0xf3,	/* HSB at  13(50Hz) /  17(60Hz)
-					 * pixels after end of last line */
-	R_07_H_SYNC_STOP, 0xe8,		/* HSS seems to be needed to
-					 * work with NTSC, too */
-	R_08_SYNC_CNTL, 0xc8,		/* AUFD=1, FSEL=1, EXFIL=0,
-					 * VTRC=1, HPLL=0, VNOI=0 */
-	R_09_LUMA_CNTL, 0x01,		/* BYPS=0, PREF=0, BPSS=0,
-					 * VBLB=0, UPTCV=0, APER=1 */
-	R_0A_LUMA_BRIGHT_CNTL, 0x80,
-	R_0B_LUMA_CONTRAST_CNTL, 0x47,	/* 0b - CONT=1.109 */
-	R_0C_CHROMA_SAT_CNTL, 0x40,
-	R_0D_CHROMA_HUE_CNTL, 0x00,
-	R_0E_CHROMA_CNTL_1, 0x01,	/* 0e - CDTO=0, CSTD=0, DCCF=0,
-					 * FCTC=0, CHBW=1 */
-	R_0F_CHROMA_GAIN_CNTL, 0x00,	/* reserved */
-	R_10_CHROMA_CNTL_2, 0x48,	/* 10 - OFTS=1, HDEL=0, VRLN=1, YDEL=0 */
-	R_11_MODE_DELAY_CNTL, 0x1c,	/* 11 - GPSW=0, CM99=0, FECO=0, COMPO=1,
-					 * OEYC=1, OEHV=1, VIPB=0, COLO=0 */
-	R_12_RT_SIGNAL_CNTL, 0x00,	/* 12 - output control 2 */
-	R_13_RT_X_PORT_OUT_CNTL, 0x00,	/* 13 - output control 3 */
-	R_14_ANAL_ADC_COMPAT_CNTL, 0x00,
-	R_15_VGATE_START_FID_CHG, 0x00,
-	R_16_VGATE_STOP, 0x00,
-	R_17_MISC_VGATE_CONF_AND_MSB, 0x00,
-
-	0x00, 0x00
-};
-
-/* SAA7113 init codes */
-static const unsigned char saa7113_init[] = {
-	R_01_INC_DELAY, 0x08,
-	R_02_INPUT_CNTL_1, 0xc2,
-	R_03_INPUT_CNTL_2, 0x30,
-	R_04_INPUT_CNTL_3, 0x00,
-	R_05_INPUT_CNTL_4, 0x00,
-	R_06_H_SYNC_START, 0x89,
-	R_07_H_SYNC_STOP, 0x0d,
-	R_08_SYNC_CNTL, 0x88,
-	R_09_LUMA_CNTL, 0x01,
-	R_0A_LUMA_BRIGHT_CNTL, 0x80,
-	R_0B_LUMA_CONTRAST_CNTL, 0x47,
-	R_0C_CHROMA_SAT_CNTL, 0x40,
-	R_0D_CHROMA_HUE_CNTL, 0x00,
-	R_0E_CHROMA_CNTL_1, 0x01,
-	R_0F_CHROMA_GAIN_CNTL, 0x2a,
-	R_10_CHROMA_CNTL_2, 0x08,
-	R_11_MODE_DELAY_CNTL, 0x0c,
-	R_12_RT_SIGNAL_CNTL, 0x07,
-	R_13_RT_X_PORT_OUT_CNTL, 0x00,
-	R_14_ANAL_ADC_COMPAT_CNTL, 0x00,
-	R_15_VGATE_START_FID_CHG, 0x00,
-	R_16_VGATE_STOP, 0x00,
-	R_17_MISC_VGATE_CONF_AND_MSB, 0x00,
-
-	0x00, 0x00
-};
-
-/* If a value differs from the Hauppauge driver values, then the comment starts with
-   'was 0xXX' to denote the Hauppauge value. Otherwise the value is identical to what the
-   Hauppauge driver sets. */
-
-/* SAA7114 and SAA7115 initialization table */
-static const unsigned char saa7115_init_auto_input[] = {
-		/* Front-End Part */
-	R_01_INC_DELAY, 0x48,			/* white peak control disabled */
-	R_03_INPUT_CNTL_2, 0x20,		/* was 0x30. 0x20: long vertical blanking */
-	R_04_INPUT_CNTL_3, 0x90,		/* analog gain set to 0 */
-	R_05_INPUT_CNTL_4, 0x90,		/* analog gain set to 0 */
-		/* Decoder Part */
-	R_06_H_SYNC_START, 0xeb,		/* horiz sync begin = -21 */
-	R_07_H_SYNC_STOP, 0xe0,			/* horiz sync stop = -17 */
-	R_09_LUMA_CNTL, 0x53,			/* 0x53, was 0x56 for 60hz. luminance control */
-	R_0A_LUMA_BRIGHT_CNTL, 0x80,		/* was 0x88. decoder brightness, 0x80 is itu standard */
-	R_0B_LUMA_CONTRAST_CNTL, 0x44,		/* was 0x48. decoder contrast, 0x44 is itu standard */
-	R_0C_CHROMA_SAT_CNTL, 0x40,		/* was 0x47. decoder saturation, 0x40 is itu standard */
-	R_0D_CHROMA_HUE_CNTL, 0x00,
-	R_0F_CHROMA_GAIN_CNTL, 0x00,		/* use automatic gain  */
-	R_10_CHROMA_CNTL_2, 0x06,		/* chroma: active adaptive combfilter */
-	R_11_MODE_DELAY_CNTL, 0x00,
-	R_12_RT_SIGNAL_CNTL, 0x9d,		/* RTS0 output control: VGATE */
-	R_13_RT_X_PORT_OUT_CNTL, 0x80,		/* ITU656 standard mode, RTCO output enable RTCE */
-	R_14_ANAL_ADC_COMPAT_CNTL, 0x00,
-	R_18_RAW_DATA_GAIN_CNTL, 0x40,		/* gain 0x00 = nominal */
-	R_19_RAW_DATA_OFF_CNTL, 0x80,
-	R_1A_COLOR_KILL_LVL_CNTL, 0x77,		/* recommended value */
-	R_1B_MISC_TVVCRDET, 0x42,		/* recommended value */
-	R_1C_ENHAN_COMB_CTRL1, 0xa9,		/* recommended value */
-	R_1D_ENHAN_COMB_CTRL2, 0x01,		/* recommended value */
-
-
-	R_80_GLOBAL_CNTL_1, 0x0,		/* No tasks enabled at init */
-
-		/* Power Device Control */
-	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,	/* reset device */
-	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0,	/* set device programmed, all in operational mode */
-	0x00, 0x00
-};
-
-/* Used to reset saa7113, saa7114 and saa7115 */
-static const unsigned char saa7115_cfg_reset_scaler[] = {
-	R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x00,	/* disable I-port output */
-	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,		/* reset scaler */
-	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0,		/* activate scaler */
-	R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01,	/* enable I-port output */
-	0x00, 0x00
-};
-
-/* ============== SAA7715 VIDEO templates =============  */
-
-static const unsigned char saa7115_cfg_60hz_video[] = {
-	R_80_GLOBAL_CNTL_1, 0x00,			/* reset tasks */
-	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,		/* reset scaler */
-
-	R_15_VGATE_START_FID_CHG, 0x03,
-	R_16_VGATE_STOP, 0x11,
-	R_17_MISC_VGATE_CONF_AND_MSB, 0x9c,
-
-	R_08_SYNC_CNTL, 0x68,			/* 0xBO: auto detection, 0x68 = NTSC */
-	R_0E_CHROMA_CNTL_1, 0x07,		/* video autodetection is on */
-
-	R_5A_V_OFF_FOR_SLICER, 0x06,		/* standard 60hz value for ITU656 line counting */
-
-	/* Task A */
-	R_90_A_TASK_HANDLING_CNTL, 0x80,
-	R_91_A_X_PORT_FORMATS_AND_CONF, 0x48,
-	R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40,
-	R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84,
-
-	/* hoffset low (input), 0x0002 is minimum */
-	R_94_A_HORIZ_INPUT_WINDOW_START, 0x01,
-	R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00,
-
-	/* hsize low (input), 0x02d0 = 720 */
-	R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0,
-	R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02,
-
-	R_98_A_VERT_INPUT_WINDOW_START, 0x05,
-	R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00,
-
-	R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x0c,
-	R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00,
-
-	R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0,
-	R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05,
-
-	R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x0c,
-	R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00,
-
-	/* Task B */
-	R_C0_B_TASK_HANDLING_CNTL, 0x00,
-	R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08,
-	R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00,
-	R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80,
-
-	/* 0x0002 is minimum */
-	R_C4_B_HORIZ_INPUT_WINDOW_START, 0x02,
-	R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00,
-
-	/* 0x02d0 = 720 */
-	R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0,
-	R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02,
-
-	/* vwindow start 0x12 = 18 */
-	R_C8_B_VERT_INPUT_WINDOW_START, 0x12,
-	R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00,
-
-	/* vwindow length 0xf8 = 248 */
-	R_CA_B_VERT_INPUT_WINDOW_LENGTH, VRES_60HZ>>1,
-	R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, VRES_60HZ>>9,
-
-	/* hwindow 0x02d0 = 720 */
-	R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0,
-	R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02,
-
-	R_F0_LFCO_PER_LINE, 0xad,		/* Set PLL Register. 60hz 525 lines per frame, 27 MHz */
-	R_F1_P_I_PARAM_SELECT, 0x05,		/* low bit with 0xF0 */
-	R_F5_PULSGEN_LINE_LENGTH, 0xad,
-	R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01,
-
-	0x00, 0x00
-};
-
-static const unsigned char saa7115_cfg_50hz_video[] = {
-	R_80_GLOBAL_CNTL_1, 0x00,
-	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,	/* reset scaler */
-
-	R_15_VGATE_START_FID_CHG, 0x37,		/* VGATE start */
-	R_16_VGATE_STOP, 0x16,
-	R_17_MISC_VGATE_CONF_AND_MSB, 0x99,
-
-	R_08_SYNC_CNTL, 0x28,			/* 0x28 = PAL */
-	R_0E_CHROMA_CNTL_1, 0x07,
-
-	R_5A_V_OFF_FOR_SLICER, 0x03,		/* standard 50hz value */
-
-	/* Task A */
-	R_90_A_TASK_HANDLING_CNTL, 0x81,
-	R_91_A_X_PORT_FORMATS_AND_CONF, 0x48,
-	R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40,
-	R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84,
-
-	/* This is weird: the datasheet says that you should use 2 as the minimum value, */
-	/* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */
-	/* hoffset low (input), 0x0002 is minimum */
-	R_94_A_HORIZ_INPUT_WINDOW_START, 0x00,
-	R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00,
-
-	/* hsize low (input), 0x02d0 = 720 */
-	R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0,
-	R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02,
-
-	R_98_A_VERT_INPUT_WINDOW_START, 0x03,
-	R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00,
-
-	/* vsize 0x12 = 18 */
-	R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x12,
-	R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00,
-
-	/* hsize 0x05a0 = 1440 */
-	R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0,
-	R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05,	/* hsize hi (output) */
-	R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x12,		/* vsize low (output), 0x12 = 18 */
-	R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00,	/* vsize hi (output) */
-
-	/* Task B */
-	R_C0_B_TASK_HANDLING_CNTL, 0x00,
-	R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08,
-	R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00,
-	R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80,
-
-	/* This is weird: the datasheet says that you should use 2 as the minimum value, */
-	/* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */
-	/* hoffset low (input), 0x0002 is minimum. See comment above. */
-	R_C4_B_HORIZ_INPUT_WINDOW_START, 0x00,
-	R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00,
-
-	/* hsize 0x02d0 = 720 */
-	R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0,
-	R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02,
-
-	/* voffset 0x16 = 22 */
-	R_C8_B_VERT_INPUT_WINDOW_START, 0x16,
-	R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00,
-
-	/* vsize 0x0120 = 288 */
-	R_CA_B_VERT_INPUT_WINDOW_LENGTH, 0x20,
-	R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, 0x01,
-
-	/* hsize 0x02d0 = 720 */
-	R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0,
-	R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02,
-
-	R_F0_LFCO_PER_LINE, 0xb0,		/* Set PLL Register. 50hz 625 lines per frame, 27 MHz */
-	R_F1_P_I_PARAM_SELECT, 0x05,		/* low bit with 0xF0, (was 0x05) */
-	R_F5_PULSGEN_LINE_LENGTH, 0xb0,
-	R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01,
-
-	0x00, 0x00
-};
-
-/* ============== SAA7715 VIDEO templates (end) =======  */
-
-static const unsigned char saa7115_cfg_vbi_on[] = {
-	R_80_GLOBAL_CNTL_1, 0x00,			/* reset tasks */
-	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,		/* reset scaler */
-	R_80_GLOBAL_CNTL_1, 0x30,			/* Activate both tasks */
-	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0,		/* activate scaler */
-	R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01,	/* Enable I-port output */
-
-	0x00, 0x00
-};
-
-static const unsigned char saa7115_cfg_vbi_off[] = {
-	R_80_GLOBAL_CNTL_1, 0x00,			/* reset tasks */
-	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,		/* reset scaler */
-	R_80_GLOBAL_CNTL_1, 0x20,			/* Activate only task "B" */
-	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0,		/* activate scaler */
-	R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01,	/* Enable I-port output */
-
-	0x00, 0x00
-};
-
-
-static const unsigned char saa7115_init_misc[] = {
-	R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F, 0x01,
-	R_83_X_PORT_I_O_ENA_AND_OUT_CLK, 0x01,
-	R_84_I_PORT_SIGNAL_DEF, 0x20,
-	R_85_I_PORT_SIGNAL_POLAR, 0x21,
-	R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT, 0xc5,
-	R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01,
-
-	/* Task A */
-	R_A0_A_HORIZ_PRESCALING, 0x01,
-	R_A1_A_ACCUMULATION_LENGTH, 0x00,
-	R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00,
-
-	/* Configure controls at nominal value*/
-	R_A4_A_LUMA_BRIGHTNESS_CNTL, 0x80,
-	R_A5_A_LUMA_CONTRAST_CNTL, 0x40,
-	R_A6_A_CHROMA_SATURATION_CNTL, 0x40,
-
-	/* note: 2 x zoom ensures that VBI lines have same length as video lines. */
-	R_A8_A_HORIZ_LUMA_SCALING_INC, 0x00,
-	R_A9_A_HORIZ_LUMA_SCALING_INC_MSB, 0x02,
-
-	R_AA_A_HORIZ_LUMA_PHASE_OFF, 0x00,
-
-	/* must be horiz lum scaling / 2 */
-	R_AC_A_HORIZ_CHROMA_SCALING_INC, 0x00,
-	R_AD_A_HORIZ_CHROMA_SCALING_INC_MSB, 0x01,
-
-	/* must be offset luma / 2 */
-	R_AE_A_HORIZ_CHROMA_PHASE_OFF, 0x00,
-
-	R_B0_A_VERT_LUMA_SCALING_INC, 0x00,
-	R_B1_A_VERT_LUMA_SCALING_INC_MSB, 0x04,
-
-	R_B2_A_VERT_CHROMA_SCALING_INC, 0x00,
-	R_B3_A_VERT_CHROMA_SCALING_INC_MSB, 0x04,
-
-	R_B4_A_VERT_SCALING_MODE_CNTL, 0x01,
-
-	R_B8_A_VERT_CHROMA_PHASE_OFF_00, 0x00,
-	R_B9_A_VERT_CHROMA_PHASE_OFF_01, 0x00,
-	R_BA_A_VERT_CHROMA_PHASE_OFF_10, 0x00,
-	R_BB_A_VERT_CHROMA_PHASE_OFF_11, 0x00,
-
-	R_BC_A_VERT_LUMA_PHASE_OFF_00, 0x00,
-	R_BD_A_VERT_LUMA_PHASE_OFF_01, 0x00,
-	R_BE_A_VERT_LUMA_PHASE_OFF_10, 0x00,
-	R_BF_A_VERT_LUMA_PHASE_OFF_11, 0x00,
-
-	/* Task B */
-	R_D0_B_HORIZ_PRESCALING, 0x01,
-	R_D1_B_ACCUMULATION_LENGTH, 0x00,
-	R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00,
-
-	/* Configure controls at nominal value*/
-	R_D4_B_LUMA_BRIGHTNESS_CNTL, 0x80,
-	R_D5_B_LUMA_CONTRAST_CNTL, 0x40,
-	R_D6_B_CHROMA_SATURATION_CNTL, 0x40,
-
-	/* hor lum scaling 0x0400 = 1 */
-	R_D8_B_HORIZ_LUMA_SCALING_INC, 0x00,
-	R_D9_B_HORIZ_LUMA_SCALING_INC_MSB, 0x04,
-
-	R_DA_B_HORIZ_LUMA_PHASE_OFF, 0x00,
-
-	/* must be hor lum scaling / 2 */
-	R_DC_B_HORIZ_CHROMA_SCALING, 0x00,
-	R_DD_B_HORIZ_CHROMA_SCALING_MSB, 0x02,
-
-	/* must be offset luma / 2 */
-	R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA, 0x00,
-
-	R_E0_B_VERT_LUMA_SCALING_INC, 0x00,
-	R_E1_B_VERT_LUMA_SCALING_INC_MSB, 0x04,
-
-	R_E2_B_VERT_CHROMA_SCALING_INC, 0x00,
-	R_E3_B_VERT_CHROMA_SCALING_INC_MSB, 0x04,
-
-	R_E4_B_VERT_SCALING_MODE_CNTL, 0x01,
-
-	R_E8_B_VERT_CHROMA_PHASE_OFF_00, 0x00,
-	R_E9_B_VERT_CHROMA_PHASE_OFF_01, 0x00,
-	R_EA_B_VERT_CHROMA_PHASE_OFF_10, 0x00,
-	R_EB_B_VERT_CHROMA_PHASE_OFF_11, 0x00,
-
-	R_EC_B_VERT_LUMA_PHASE_OFF_00, 0x00,
-	R_ED_B_VERT_LUMA_PHASE_OFF_01, 0x00,
-	R_EE_B_VERT_LUMA_PHASE_OFF_10, 0x00,
-	R_EF_B_VERT_LUMA_PHASE_OFF_11, 0x00,
-
-	R_F2_NOMINAL_PLL2_DTO, 0x50,		/* crystal clock = 24.576 MHz, target = 27MHz */
-	R_F3_PLL_INCREMENT, 0x46,
-	R_F4_PLL2_STATUS, 0x00,
-	R_F7_PULSE_A_POS_MSB, 0x4b,		/* not the recommended settings! */
-	R_F8_PULSE_B_POS, 0x00,
-	R_F9_PULSE_B_POS_MSB, 0x4b,
-	R_FA_PULSE_C_POS, 0x00,
-	R_FB_PULSE_C_POS_MSB, 0x4b,
-
-	/* PLL2 lock detection settings: 71 lines 50% phase error */
-	R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES, 0x88,
-
-	/* Turn off VBI */
-	R_40_SLICER_CNTL_1, 0x20,             /* No framing code errors allowed. */
-	R_41_LCR_BASE, 0xff,
-	R_41_LCR_BASE+1, 0xff,
-	R_41_LCR_BASE+2, 0xff,
-	R_41_LCR_BASE+3, 0xff,
-	R_41_LCR_BASE+4, 0xff,
-	R_41_LCR_BASE+5, 0xff,
-	R_41_LCR_BASE+6, 0xff,
-	R_41_LCR_BASE+7, 0xff,
-	R_41_LCR_BASE+8, 0xff,
-	R_41_LCR_BASE+9, 0xff,
-	R_41_LCR_BASE+10, 0xff,
-	R_41_LCR_BASE+11, 0xff,
-	R_41_LCR_BASE+12, 0xff,
-	R_41_LCR_BASE+13, 0xff,
-	R_41_LCR_BASE+14, 0xff,
-	R_41_LCR_BASE+15, 0xff,
-	R_41_LCR_BASE+16, 0xff,
-	R_41_LCR_BASE+17, 0xff,
-	R_41_LCR_BASE+18, 0xff,
-	R_41_LCR_BASE+19, 0xff,
-	R_41_LCR_BASE+20, 0xff,
-	R_41_LCR_BASE+21, 0xff,
-	R_41_LCR_BASE+22, 0xff,
-	R_58_PROGRAM_FRAMING_CODE, 0x40,
-	R_59_H_OFF_FOR_SLICER, 0x47,
-	R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF, 0x83,
-	R_5D_DID, 0xbd,
-	R_5E_SDID, 0x35,
-
-	R_02_INPUT_CNTL_1, 0xc4, /* input tuner -> input 4, amplifier active */
-
-	R_80_GLOBAL_CNTL_1, 0x20,		/* enable task B */
-	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,
-	R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0,
-	0x00, 0x00
-};
-
-static int saa711x_odd_parity(u8 c)
-{
-	c ^= (c >> 4);
-	c ^= (c >> 2);
-	c ^= (c >> 1);
-
-	return c & 1;
-}
-
-static int saa711x_decode_vps(u8 *dst, u8 *p)
-{
-	static const u8 biphase_tbl[] = {
-		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
-		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
-		0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96,
-		0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2,
-		0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94,
-		0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0,
-		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
-		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
-		0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5,
-		0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1,
-		0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87,
-		0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3,
-		0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85,
-		0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1,
-		0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5,
-		0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1,
-		0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4,
-		0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0,
-		0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86,
-		0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2,
-		0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84,
-		0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0,
-		0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4,
-		0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0,
-		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
-		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
-		0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96,
-		0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2,
-		0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94,
-		0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0,
-		0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4,
-		0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0,
-	};
-	int i;
-	u8 c, err = 0;
-
-	for (i = 0; i < 2 * 13; i += 2) {
-		err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]];
-		c = (biphase_tbl[p[i + 1]] & 0xf) | ((biphase_tbl[p[i]] & 0xf) << 4);
-		dst[i / 2] = c;
-	}
-	return err & 0xf0;
-}
-
-static int saa711x_decode_wss(u8 *p)
-{
-	static const int wss_bits[8] = {
-		0, 0, 0, 1, 0, 1, 1, 1
-	};
-	unsigned char parity;
-	int wss = 0;
-	int i;
-
-	for (i = 0; i < 16; i++) {
-		int b1 = wss_bits[p[i] & 7];
-		int b2 = wss_bits[(p[i] >> 3) & 7];
-
-		if (b1 == b2)
-			return -1;
-		wss |= b2 << i;
-	}
-	parity = wss & 15;
-	parity ^= parity >> 2;
-	parity ^= parity >> 1;
-
-	if (!(parity & 1))
-		return -1;
-
-	return wss;
-}
-
-static int saa711x_s_clock_freq(struct v4l2_subdev *sd, u32 freq)
-{
-	struct saa711x_state *state = to_state(sd);
-	u32 acpf;
-	u32 acni;
-	u32 hz;
-	u64 f;
-	u8 acc = 0; 	/* reg 0x3a, audio clock control */
-
-	/* Checks for chips that don't have audio clock (saa7111, saa7113) */
-	if (!saa711x_has_reg(state->ident, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD))
-		return 0;
-
-	v4l2_dbg(1, debug, sd, "set audio clock freq: %d\n", freq);
-
-	/* sanity check */
-	if (freq < 32000 || freq > 48000)
-		return -EINVAL;
-
-	/* hz is the refresh rate times 100 */
-	hz = (state->std & V4L2_STD_525_60) ? 5994 : 5000;
-	/* acpf = (256 * freq) / field_frequency == (256 * 100 * freq) / hz */
-	acpf = (25600 * freq) / hz;
-	/* acni = (256 * freq * 2^23) / crystal_frequency =
-		  (freq * 2^(8+23)) / crystal_frequency =
-		  (freq << 31) / crystal_frequency */
-	f = freq;
-	f = f << 31;
-	do_div(f, state->crystal_freq);
-	acni = f;
-	if (state->ucgc) {
-		acpf = acpf * state->cgcdiv / 16;
-		acni = acni * state->cgcdiv / 16;
-		acc = 0x80;
-		if (state->cgcdiv == 3)
-			acc |= 0x40;
-	}
-	if (state->apll)
-		acc |= 0x08;
-
-	saa711x_write(sd, R_38_CLK_RATIO_AMXCLK_TO_ASCLK, 0x03);
-	saa711x_write(sd, R_39_CLK_RATIO_ASCLK_TO_ALRCLK, 0x10);
-	saa711x_write(sd, R_3A_AUD_CLK_GEN_BASIC_SETUP, acc);
-
-	saa711x_write(sd, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD, acpf & 0xff);
-	saa711x_write(sd, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+1,
-							(acpf >> 8) & 0xff);
-	saa711x_write(sd, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+2,
-							(acpf >> 16) & 0x03);
-
-	saa711x_write(sd, R_34_AUD_MAST_CLK_NOMINAL_INC, acni & 0xff);
-	saa711x_write(sd, R_34_AUD_MAST_CLK_NOMINAL_INC+1, (acni >> 8) & 0xff);
-	saa711x_write(sd, R_34_AUD_MAST_CLK_NOMINAL_INC+2, (acni >> 16) & 0x3f);
-	state->audclk_freq = freq;
-	return 0;
-}
-
-static int saa711x_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-	struct saa711x_state *state = to_state(sd);
-
-	switch (ctrl->id) {
-	case V4L2_CID_CHROMA_AGC:
-		/* chroma gain cluster */
-		if (state->agc->val)
-			state->gain->val =
-				saa711x_read(sd, R_0F_CHROMA_GAIN_CNTL) & 0x7f;
-		break;
-	}
-	return 0;
-}
-
-static int saa711x_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-	struct saa711x_state *state = to_state(sd);
-
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		saa711x_write(sd, R_0A_LUMA_BRIGHT_CNTL, ctrl->val);
-		break;
-
-	case V4L2_CID_CONTRAST:
-		saa711x_write(sd, R_0B_LUMA_CONTRAST_CNTL, ctrl->val);
-		break;
-
-	case V4L2_CID_SATURATION:
-		saa711x_write(sd, R_0C_CHROMA_SAT_CNTL, ctrl->val);
-		break;
-
-	case V4L2_CID_HUE:
-		saa711x_write(sd, R_0D_CHROMA_HUE_CNTL, ctrl->val);
-		break;
-
-	case V4L2_CID_CHROMA_AGC:
-		/* chroma gain cluster */
-		if (state->agc->val)
-			saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val);
-		else
-			saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val | 0x80);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int saa711x_set_size(struct v4l2_subdev *sd, int width, int height)
-{
-	struct saa711x_state *state = to_state(sd);
-	int HPSC, HFSC;
-	int VSCY;
-	int res;
-	int is_50hz = state->std & V4L2_STD_625_50;
-	int Vsrc = is_50hz ? 576 : 480;
-
-	v4l2_dbg(1, debug, sd, "decoder set size to %ix%i\n", width, height);
-
-	/* FIXME need better bounds checking here */
-	if ((width < 1) || (width > 1440))
-		return -EINVAL;
-	if ((height < 1) || (height > Vsrc))
-		return -EINVAL;
-
-	if (!saa711x_has_reg(state->ident, R_D0_B_HORIZ_PRESCALING)) {
-		/* Decoder only supports 720 columns and 480 or 576 lines */
-		if (width != 720)
-			return -EINVAL;
-		if (height != Vsrc)
-			return -EINVAL;
-	}
-
-	state->width = width;
-	state->height = height;
-
-	if (!saa711x_has_reg(state->ident, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH))
-		return 0;
-
-	/* probably have a valid size, let's set it */
-	/* Set output width/height */
-	/* width */
-
-	saa711x_write(sd, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH,
-					(u8) (width & 0xff));
-	saa711x_write(sd, R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB,
-					(u8) ((width >> 8) & 0xff));
-
-	/* Vertical Scaling uses height/2 */
-	res = height / 2;
-
-	/* On 60Hz, it is using a higher Vertical Output Size */
-	if (!is_50hz)
-		res += (VRES_60HZ - 480) >> 1;
-
-		/* height */
-	saa711x_write(sd, R_CE_B_VERT_OUTPUT_WINDOW_LENGTH,
-					(u8) (res & 0xff));
-	saa711x_write(sd, R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB,
-					(u8) ((res >> 8) & 0xff));
-
-	/* Scaling settings */
-	/* Hprescaler is floor(inres/outres) */
-	HPSC = (int)(720 / width);
-	/* 0 is not allowed (div. by zero) */
-	HPSC = HPSC ? HPSC : 1;
-	HFSC = (int)((1024 * 720) / (HPSC * width));
-	/* FIXME hardcodes to "Task B"
-	 * write H prescaler integer */
-	saa711x_write(sd, R_D0_B_HORIZ_PRESCALING,
-				(u8) (HPSC & 0x3f));
-
-	v4l2_dbg(1, debug, sd, "Hpsc: 0x%05x, Hfsc: 0x%05x\n", HPSC, HFSC);
-	/* write H fine-scaling (luminance) */
-	saa711x_write(sd, R_D8_B_HORIZ_LUMA_SCALING_INC,
-				(u8) (HFSC & 0xff));
-	saa711x_write(sd, R_D9_B_HORIZ_LUMA_SCALING_INC_MSB,
-				(u8) ((HFSC >> 8) & 0xff));
-	/* write H fine-scaling (chrominance)
-	 * must be lum/2, so i'll just bitshift :) */
-	saa711x_write(sd, R_DC_B_HORIZ_CHROMA_SCALING,
-				(u8) ((HFSC >> 1) & 0xff));
-	saa711x_write(sd, R_DD_B_HORIZ_CHROMA_SCALING_MSB,
-				(u8) ((HFSC >> 9) & 0xff));
-
-	VSCY = (int)((1024 * Vsrc) / height);
-	v4l2_dbg(1, debug, sd, "Vsrc: %d, Vscy: 0x%05x\n", Vsrc, VSCY);
-
-	/* Correct Contrast and Luminance */
-	saa711x_write(sd, R_D5_B_LUMA_CONTRAST_CNTL,
-					(u8) (64 * 1024 / VSCY));
-	saa711x_write(sd, R_D6_B_CHROMA_SATURATION_CNTL,
-					(u8) (64 * 1024 / VSCY));
-
-		/* write V fine-scaling (luminance) */
-	saa711x_write(sd, R_E0_B_VERT_LUMA_SCALING_INC,
-					(u8) (VSCY & 0xff));
-	saa711x_write(sd, R_E1_B_VERT_LUMA_SCALING_INC_MSB,
-					(u8) ((VSCY >> 8) & 0xff));
-		/* write V fine-scaling (chrominance) */
-	saa711x_write(sd, R_E2_B_VERT_CHROMA_SCALING_INC,
-					(u8) (VSCY & 0xff));
-	saa711x_write(sd, R_E3_B_VERT_CHROMA_SCALING_INC_MSB,
-					(u8) ((VSCY >> 8) & 0xff));
-
-	saa711x_writeregs(sd, saa7115_cfg_reset_scaler);
-
-	/* Activates task "B" */
-	saa711x_write(sd, R_80_GLOBAL_CNTL_1,
-				saa711x_read(sd, R_80_GLOBAL_CNTL_1) | 0x20);
-
-	return 0;
-}
-
-static void saa711x_set_v4lstd(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct saa711x_state *state = to_state(sd);
-
-	/* Prevent unnecessary standard changes. During a standard
-	   change the I-Port is temporarily disabled. Any devices
-	   reading from that port can get confused.
-	   Note that s_std is also used to switch from
-	   radio to TV mode, so if a s_std is broadcast to
-	   all I2C devices then you do not want to have an unwanted
-	   side-effect here. */
-	if (std == state->std)
-		return;
-
-	state->std = std;
-
-	// This works for NTSC-M, SECAM-L and the 50Hz PAL variants.
-	if (std & V4L2_STD_525_60) {
-		v4l2_dbg(1, debug, sd, "decoder set standard 60 Hz\n");
-		saa711x_writeregs(sd, saa7115_cfg_60hz_video);
-		saa711x_set_size(sd, 720, 480);
-	} else {
-		v4l2_dbg(1, debug, sd, "decoder set standard 50 Hz\n");
-		saa711x_writeregs(sd, saa7115_cfg_50hz_video);
-		saa711x_set_size(sd, 720, 576);
-	}
-
-	/* Register 0E - Bits D6-D4 on NO-AUTO mode
-		(SAA7111 and SAA7113 doesn't have auto mode)
-	    50 Hz / 625 lines           60 Hz / 525 lines
-	000 PAL BGDHI (4.43Mhz)         NTSC M (3.58MHz)
-	001 NTSC 4.43 (50 Hz)           PAL 4.43 (60 Hz)
-	010 Combination-PAL N (3.58MHz) NTSC 4.43 (60 Hz)
-	011 NTSC N (3.58MHz)            PAL M (3.58MHz)
-	100 reserved                    NTSC-Japan (3.58MHz)
-	*/
-	if (state->ident <= V4L2_IDENT_SAA7113) {
-		u8 reg = saa711x_read(sd, R_0E_CHROMA_CNTL_1) & 0x8f;
-
-		if (std == V4L2_STD_PAL_M) {
-			reg |= 0x30;
-		} else if (std == V4L2_STD_PAL_Nc) {
-			reg |= 0x20;
-		} else if (std == V4L2_STD_PAL_60) {
-			reg |= 0x10;
-		} else if (std == V4L2_STD_NTSC_M_JP) {
-			reg |= 0x40;
-		} else if (std & V4L2_STD_SECAM) {
-			reg |= 0x50;
-		}
-		saa711x_write(sd, R_0E_CHROMA_CNTL_1, reg);
-	} else {
-		/* restart task B if needed */
-		int taskb = saa711x_read(sd, R_80_GLOBAL_CNTL_1) & 0x10;
-
-		if (taskb && state->ident == V4L2_IDENT_SAA7114) {
-			saa711x_writeregs(sd, saa7115_cfg_vbi_on);
-		}
-
-		/* switch audio mode too! */
-		saa711x_s_clock_freq(sd, state->audclk_freq);
-	}
-}
-
-/* setup the sliced VBI lcr registers according to the sliced VBI format */
-static void saa711x_set_lcr(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt)
-{
-	struct saa711x_state *state = to_state(sd);
-	int is_50hz = (state->std & V4L2_STD_625_50);
-	u8 lcr[24];
-	int i, x;
-
-#if 1
-	/* saa7113/7114/7118 VBI support are experimental */
-	if (!saa711x_has_reg(state->ident, R_41_LCR_BASE))
-		return;
-
-#else
-	/* SAA7113 and SAA7118 also should support VBI - Need testing */
-	if (state->ident != V4L2_IDENT_SAA7115)
-		return;
-#endif
-
-	for (i = 0; i <= 23; i++)
-		lcr[i] = 0xff;
-
-	if (fmt == NULL) {
-		/* raw VBI */
-		if (is_50hz)
-			for (i = 6; i <= 23; i++)
-				lcr[i] = 0xdd;
-		else
-			for (i = 10; i <= 21; i++)
-				lcr[i] = 0xdd;
-	} else {
-		/* sliced VBI */
-		/* first clear lines that cannot be captured */
-		if (is_50hz) {
-			for (i = 0; i <= 5; i++)
-				fmt->service_lines[0][i] =
-					fmt->service_lines[1][i] = 0;
-		}
-		else {
-			for (i = 0; i <= 9; i++)
-				fmt->service_lines[0][i] =
-					fmt->service_lines[1][i] = 0;
-			for (i = 22; i <= 23; i++)
-				fmt->service_lines[0][i] =
-					fmt->service_lines[1][i] = 0;
-		}
-
-		/* Now set the lcr values according to the specified service */
-		for (i = 6; i <= 23; i++) {
-			lcr[i] = 0;
-			for (x = 0; x <= 1; x++) {
-				switch (fmt->service_lines[1-x][i]) {
-					case 0:
-						lcr[i] |= 0xf << (4 * x);
-						break;
-					case V4L2_SLICED_TELETEXT_B:
-						lcr[i] |= 1 << (4 * x);
-						break;
-					case V4L2_SLICED_CAPTION_525:
-						lcr[i] |= 4 << (4 * x);
-						break;
-					case V4L2_SLICED_WSS_625:
-						lcr[i] |= 5 << (4 * x);
-						break;
-					case V4L2_SLICED_VPS:
-						lcr[i] |= 7 << (4 * x);
-						break;
-				}
-			}
-		}
-	}
-
-	/* write the lcr registers */
-	for (i = 2; i <= 23; i++) {
-		saa711x_write(sd, i - 2 + R_41_LCR_BASE, lcr[i]);
-	}
-
-	/* enable/disable raw VBI capturing */
-	saa711x_writeregs(sd, fmt == NULL ?
-				saa7115_cfg_vbi_on :
-				saa7115_cfg_vbi_off);
-}
-
-static int saa711x_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *sliced)
-{
-	static u16 lcr2vbi[] = {
-		0, V4L2_SLICED_TELETEXT_B, 0,	/* 1 */
-		0, V4L2_SLICED_CAPTION_525,	/* 4 */
-		V4L2_SLICED_WSS_625, 0,		/* 5 */
-		V4L2_SLICED_VPS, 0, 0, 0, 0,	/* 7 */
-		0, 0, 0, 0
-	};
-	int i;
-
-	memset(sliced, 0, sizeof(*sliced));
-	/* done if using raw VBI */
-	if (saa711x_read(sd, R_80_GLOBAL_CNTL_1) & 0x10)
-		return 0;
-	for (i = 2; i <= 23; i++) {
-		u8 v = saa711x_read(sd, i - 2 + R_41_LCR_BASE);
-
-		sliced->service_lines[0][i] = lcr2vbi[v >> 4];
-		sliced->service_lines[1][i] = lcr2vbi[v & 0xf];
-		sliced->service_set |=
-			sliced->service_lines[0][i] | sliced->service_lines[1][i];
-	}
-	return 0;
-}
-
-static int saa711x_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
-{
-	saa711x_set_lcr(sd, NULL);
-	return 0;
-}
-
-static int saa711x_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt)
-{
-	saa711x_set_lcr(sd, fmt);
-	return 0;
-}
-
-static int saa711x_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
-{
-	if (fmt->code != V4L2_MBUS_FMT_FIXED)
-		return -EINVAL;
-	fmt->field = V4L2_FIELD_INTERLACED;
-	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
-	return saa711x_set_size(sd, fmt->width, fmt->height);
-}
-
-/* Decode the sliced VBI data stream as created by the saa7115.
-   The format is described in the saa7115 datasheet in Tables 25 and 26
-   and in Figure 33.
-   The current implementation uses SAV/EAV codes and not the ancillary data
-   headers. The vbi->p pointer points to the R_5E_SDID byte right after the SAV
-   code. */
-static int saa711x_decode_vbi_line(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi)
-{
-	struct saa711x_state *state = to_state(sd);
-	static const char vbi_no_data_pattern[] = {
-		0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0
-	};
-	u8 *p = vbi->p;
-	u32 wss;
-	int id1, id2;   /* the ID1 and ID2 bytes from the internal header */
-
-	vbi->type = 0;  /* mark result as a failure */
-	id1 = p[2];
-	id2 = p[3];
-	/* Note: the field bit is inverted for 60 Hz video */
-	if (state->std & V4L2_STD_525_60)
-		id1 ^= 0x40;
-
-	/* Skip internal header, p now points to the start of the payload */
-	p += 4;
-	vbi->p = p;
-
-	/* calculate field and line number of the VBI packet (1-23) */
-	vbi->is_second_field = ((id1 & 0x40) != 0);
-	vbi->line = (id1 & 0x3f) << 3;
-	vbi->line |= (id2 & 0x70) >> 4;
-
-	/* Obtain data type */
-	id2 &= 0xf;
-
-	/* If the VBI slicer does not detect any signal it will fill up
-	   the payload buffer with 0xa0 bytes. */
-	if (!memcmp(p, vbi_no_data_pattern, sizeof(vbi_no_data_pattern)))
-		return 0;
-
-	/* decode payloads */
-	switch (id2) {
-	case 1:
-		vbi->type = V4L2_SLICED_TELETEXT_B;
-		break;
-	case 4:
-		if (!saa711x_odd_parity(p[0]) || !saa711x_odd_parity(p[1]))
-			return 0;
-		vbi->type = V4L2_SLICED_CAPTION_525;
-		break;
-	case 5:
-		wss = saa711x_decode_wss(p);
-		if (wss == -1)
-			return 0;
-		p[0] = wss & 0xff;
-		p[1] = wss >> 8;
-		vbi->type = V4L2_SLICED_WSS_625;
-		break;
-	case 7:
-		if (saa711x_decode_vps(p, p) != 0)
-			return 0;
-		vbi->type = V4L2_SLICED_VPS;
-		break;
-	default:
-		break;
-	}
-	return 0;
-}
-
-/* ============ SAA7115 AUDIO settings (end) ============= */
-
-static int saa711x_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
-{
-	struct saa711x_state *state = to_state(sd);
-	int status;
-
-	if (state->radio)
-		return 0;
-	status = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC);
-
-	v4l2_dbg(1, debug, sd, "status: 0x%02x\n", status);
-	vt->signal = ((status & (1 << 6)) == 0) ? 0xffff : 0x0;
-	return 0;
-}
-
-static int saa711x_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct saa711x_state *state = to_state(sd);
-
-	state->radio = 0;
-	saa711x_set_v4lstd(sd, std);
-	return 0;
-}
-
-static int saa711x_s_radio(struct v4l2_subdev *sd)
-{
-	struct saa711x_state *state = to_state(sd);
-
-	state->radio = 1;
-	return 0;
-}
-
-static int saa711x_s_routing(struct v4l2_subdev *sd,
-			     u32 input, u32 output, u32 config)
-{
-	struct saa711x_state *state = to_state(sd);
-	u8 mask = (state->ident <= V4L2_IDENT_SAA7111A) ? 0xf8 : 0xf0;
-
-	v4l2_dbg(1, debug, sd, "decoder set input %d output %d\n",
-		input, output);
-
-	/* saa7111/3 does not have these inputs */
-	if (state->ident <= V4L2_IDENT_SAA7113 &&
-	    (input == SAA7115_COMPOSITE4 ||
-	     input == SAA7115_COMPOSITE5)) {
-		return -EINVAL;
-	}
-	if (input > SAA7115_SVIDEO3)
-		return -EINVAL;
-	if (state->input == input && state->output == output)
-		return 0;
-	v4l2_dbg(1, debug, sd, "now setting %s input %s output\n",
-		(input >= SAA7115_SVIDEO0) ? "S-Video" : "Composite",
-		(output == SAA7115_IPORT_ON) ? "iport on" : "iport off");
-	state->input = input;
-
-	/* saa7111 has slightly different input numbering */
-	if (state->ident <= V4L2_IDENT_SAA7111A) {
-		if (input >= SAA7115_COMPOSITE4)
-			input -= 2;
-		/* saa7111 specific */
-		saa711x_write(sd, R_10_CHROMA_CNTL_2,
-				(saa711x_read(sd, R_10_CHROMA_CNTL_2) & 0x3f) |
-				((output & 0xc0) ^ 0x40));
-		saa711x_write(sd, R_13_RT_X_PORT_OUT_CNTL,
-				(saa711x_read(sd, R_13_RT_X_PORT_OUT_CNTL) & 0xf0) |
-				((output & 2) ? 0x0a : 0));
-	}
-
-	/* select mode */
-	saa711x_write(sd, R_02_INPUT_CNTL_1,
-		      (saa711x_read(sd, R_02_INPUT_CNTL_1) & mask) |
-		       input);
-
-	/* bypass chrominance trap for S-Video modes */
-	saa711x_write(sd, R_09_LUMA_CNTL,
-			(saa711x_read(sd, R_09_LUMA_CNTL) & 0x7f) |
-			(state->input >= SAA7115_SVIDEO0 ? 0x80 : 0x0));
-
-	state->output = output;
-	if (state->ident == V4L2_IDENT_SAA7114 ||
-			state->ident == V4L2_IDENT_SAA7115) {
-		saa711x_write(sd, R_83_X_PORT_I_O_ENA_AND_OUT_CLK,
-				(saa711x_read(sd, R_83_X_PORT_I_O_ENA_AND_OUT_CLK) & 0xfe) |
-				(state->output & 0x01));
-	}
-	return 0;
-}
-
-static int saa711x_s_gpio(struct v4l2_subdev *sd, u32 val)
-{
-	struct saa711x_state *state = to_state(sd);
-
-	if (state->ident > V4L2_IDENT_SAA7111A)
-		return -EINVAL;
-	saa711x_write(sd, 0x11, (saa711x_read(sd, 0x11) & 0x7f) |
-		(val ? 0x80 : 0));
-	return 0;
-}
-
-static int saa711x_s_stream(struct v4l2_subdev *sd, int enable)
-{
-	struct saa711x_state *state = to_state(sd);
-
-	v4l2_dbg(1, debug, sd, "%s output\n",
-			enable ? "enable" : "disable");
-
-	if (state->enable == enable)
-		return 0;
-	state->enable = enable;
-	if (!saa711x_has_reg(state->ident, R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED))
-		return 0;
-	saa711x_write(sd, R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, state->enable);
-	return 0;
-}
-
-static int saa711x_s_crystal_freq(struct v4l2_subdev *sd, u32 freq, u32 flags)
-{
-	struct saa711x_state *state = to_state(sd);
-
-	if (freq != SAA7115_FREQ_32_11_MHZ && freq != SAA7115_FREQ_24_576_MHZ)
-		return -EINVAL;
-	state->crystal_freq = freq;
-	state->cgcdiv = (flags & SAA7115_FREQ_FL_CGCDIV) ? 3 : 4;
-	state->ucgc = (flags & SAA7115_FREQ_FL_UCGC) ? 1 : 0;
-	state->apll = (flags & SAA7115_FREQ_FL_APLL) ? 1 : 0;
-	saa711x_s_clock_freq(sd, state->audclk_freq);
-	return 0;
-}
-
-static int saa711x_reset(struct v4l2_subdev *sd, u32 val)
-{
-	v4l2_dbg(1, debug, sd, "decoder RESET\n");
-	saa711x_writeregs(sd, saa7115_cfg_reset_scaler);
-	return 0;
-}
-
-static int saa711x_g_vbi_data(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *data)
-{
-	/* Note: the internal field ID is inverted for NTSC,
-	   so data->field 0 maps to the saa7115 even field,
-	   whereas for PAL it maps to the saa7115 odd field. */
-	switch (data->id) {
-	case V4L2_SLICED_WSS_625:
-		if (saa711x_read(sd, 0x6b) & 0xc0)
-			return -EIO;
-		data->data[0] = saa711x_read(sd, 0x6c);
-		data->data[1] = saa711x_read(sd, 0x6d);
-		return 0;
-	case V4L2_SLICED_CAPTION_525:
-		if (data->field == 0) {
-			/* CC */
-			if (saa711x_read(sd, 0x66) & 0x30)
-				return -EIO;
-			data->data[0] = saa711x_read(sd, 0x69);
-			data->data[1] = saa711x_read(sd, 0x6a);
-			return 0;
-		}
-		/* XDS */
-		if (saa711x_read(sd, 0x66) & 0xc0)
-			return -EIO;
-		data->data[0] = saa711x_read(sd, 0x67);
-		data->data[1] = saa711x_read(sd, 0x68);
-		return 0;
-	default:
-		return -EINVAL;
-	}
-}
-
-static int saa711x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
-{
-	struct saa711x_state *state = to_state(sd);
-	int reg1f, reg1e;
-
-	/*
-	 * The V4L2 core already initializes std with all supported
-	 * Standards. All driver needs to do is to mask it, to remove
-	 * standards that don't apply from the mask
-	 */
-
-	reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC);
-	v4l2_dbg(1, debug, sd, "Status byte 2 (0x1f)=0x%02x\n", reg1f);
-
-	/* horizontal/vertical not locked */
-	if (reg1f & 0x40)
-		goto ret;
-
-	if (reg1f & 0x20)
-		*std &= V4L2_STD_525_60;
-	else
-		*std &= V4L2_STD_625_50;
-
-	if (state->ident != V4L2_IDENT_SAA7115)
-		goto ret;
-
-	reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC);
-
-	switch (reg1e & 0x03) {
-	case 1:
-		*std &= V4L2_STD_NTSC;
-		break;
-	case 2:
-		/*
-		 * V4L2_STD_PAL just cover the european PAL standards.
-		 * This is wrong, as the device could also be using an
-		 * other PAL standard.
-		 */
-		*std &= V4L2_STD_PAL   | V4L2_STD_PAL_N  | V4L2_STD_PAL_Nc |
-			V4L2_STD_PAL_M | V4L2_STD_PAL_60;
-		break;
-	case 3:
-		*std &= V4L2_STD_SECAM;
-		break;
-	default:
-		/* Can't detect anything */
-		break;
-	}
-
-	v4l2_dbg(1, debug, sd, "Status byte 1 (0x1e)=0x%02x\n", reg1e);
-
-ret:
-	v4l2_dbg(1, debug, sd, "detected std mask = %08Lx\n", *std);
-
-	return 0;
-}
-
-static int saa711x_g_input_status(struct v4l2_subdev *sd, u32 *status)
-{
-	struct saa711x_state *state = to_state(sd);
-	int reg1e = 0x80;
-	int reg1f;
-
-	*status = V4L2_IN_ST_NO_SIGNAL;
-	if (state->ident == V4L2_IDENT_SAA7115)
-		reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC);
-	reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC);
-	if ((reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80)
-		*status = 0;
-	return 0;
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int saa711x_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	reg->val = saa711x_read(sd, reg->reg & 0xff);
-	reg->size = 1;
-	return 0;
-}
-
-static int saa711x_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	saa711x_write(sd, reg->reg & 0xff, reg->val & 0xff);
-	return 0;
-}
-#endif
-
-static int saa711x_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct saa711x_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, state->ident, 0);
-}
-
-static int saa711x_log_status(struct v4l2_subdev *sd)
-{
-	struct saa711x_state *state = to_state(sd);
-	int reg1e, reg1f;
-	int signalOk;
-	int vcr;
-
-	v4l2_info(sd, "Audio frequency: %d Hz\n", state->audclk_freq);
-	if (state->ident != V4L2_IDENT_SAA7115) {
-		/* status for the saa7114 */
-		reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC);
-		signalOk = (reg1f & 0xc1) == 0x81;
-		v4l2_info(sd, "Video signal:    %s\n", signalOk ? "ok" : "bad");
-		v4l2_info(sd, "Frequency:       %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz");
-		return 0;
-	}
-
-	/* status for the saa7115 */
-	reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC);
-	reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC);
-
-	signalOk = (reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80;
-	vcr = !(reg1f & 0x10);
-
-	if (state->input >= 6)
-		v4l2_info(sd, "Input:           S-Video %d\n", state->input - 6);
-	else
-		v4l2_info(sd, "Input:           Composite %d\n", state->input);
-	v4l2_info(sd, "Video signal:    %s\n", signalOk ? (vcr ? "VCR" : "broadcast/DVD") : "bad");
-	v4l2_info(sd, "Frequency:       %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz");
-
-	switch (reg1e & 0x03) {
-	case 1:
-		v4l2_info(sd, "Detected format: NTSC\n");
-		break;
-	case 2:
-		v4l2_info(sd, "Detected format: PAL\n");
-		break;
-	case 3:
-		v4l2_info(sd, "Detected format: SECAM\n");
-		break;
-	default:
-		v4l2_info(sd, "Detected format: BW/No color\n");
-		break;
-	}
-	v4l2_info(sd, "Width, Height:   %d, %d\n", state->width, state->height);
-	v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_ctrl_ops saa711x_ctrl_ops = {
-	.s_ctrl = saa711x_s_ctrl,
-	.g_volatile_ctrl = saa711x_g_volatile_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops saa711x_core_ops = {
-	.log_status = saa711x_log_status,
-	.g_chip_ident = saa711x_g_chip_ident,
-	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
-	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
-	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
-	.g_ctrl = v4l2_subdev_g_ctrl,
-	.s_ctrl = v4l2_subdev_s_ctrl,
-	.queryctrl = v4l2_subdev_queryctrl,
-	.querymenu = v4l2_subdev_querymenu,
-	.s_std = saa711x_s_std,
-	.reset = saa711x_reset,
-	.s_gpio = saa711x_s_gpio,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.g_register = saa711x_g_register,
-	.s_register = saa711x_s_register,
-#endif
-};
-
-static const struct v4l2_subdev_tuner_ops saa711x_tuner_ops = {
-	.s_radio = saa711x_s_radio,
-	.g_tuner = saa711x_g_tuner,
-};
-
-static const struct v4l2_subdev_audio_ops saa711x_audio_ops = {
-	.s_clock_freq = saa711x_s_clock_freq,
-};
-
-static const struct v4l2_subdev_video_ops saa711x_video_ops = {
-	.s_routing = saa711x_s_routing,
-	.s_crystal_freq = saa711x_s_crystal_freq,
-	.s_mbus_fmt = saa711x_s_mbus_fmt,
-	.s_stream = saa711x_s_stream,
-	.querystd = saa711x_querystd,
-	.g_input_status = saa711x_g_input_status,
-};
-
-static const struct v4l2_subdev_vbi_ops saa711x_vbi_ops = {
-	.g_vbi_data = saa711x_g_vbi_data,
-	.decode_vbi_line = saa711x_decode_vbi_line,
-	.g_sliced_fmt = saa711x_g_sliced_fmt,
-	.s_sliced_fmt = saa711x_s_sliced_fmt,
-	.s_raw_fmt = saa711x_s_raw_fmt,
-};
-
-static const struct v4l2_subdev_ops saa711x_ops = {
-	.core = &saa711x_core_ops,
-	.tuner = &saa711x_tuner_ops,
-	.audio = &saa711x_audio_ops,
-	.video = &saa711x_video_ops,
-	.vbi = &saa711x_vbi_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static int saa711x_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
-{
-	struct saa711x_state *state;
-	struct v4l2_subdev *sd;
-	struct v4l2_ctrl_handler *hdl;
-	int i;
-	char name[17];
-	char chip_id;
-	int autodetect = !id || id->driver_data == 1;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -EIO;
-
-	for (i = 0; i < 0x0f; i++) {
-		i2c_smbus_write_byte_data(client, 0, i);
-		name[i] = (i2c_smbus_read_byte_data(client, 0) & 0x0f) + '0';
-		if (name[i] > '9')
-			name[i] += 'a' - '9' - 1;
-	}
-	name[i] = '\0';
-
-	chip_id = name[5];
-
-	/* Check whether this chip is part of the saa711x series */
-	if (memcmp(name + 1, "f711", 4)) {
-		v4l_dbg(1, debug, client, "chip found @ 0x%x (ID %s) does not match a known saa711x chip.\n",
-			client->addr << 1, name);
-		return -ENODEV;
-	}
-
-	/* Safety check */
-	if (!autodetect && id->name[6] != chip_id) {
-		v4l_warn(client, "found saa711%c while %s was expected\n",
-			 chip_id, id->name);
-	}
-	snprintf(client->name, sizeof(client->name), "saa711%c", chip_id);
-	v4l_info(client, "saa711%c found (%s) @ 0x%x (%s)\n", chip_id, name,
-		 client->addr << 1, client->adapter->name);
-
-	state = kzalloc(sizeof(struct saa711x_state), GFP_KERNEL);
-	if (state == NULL)
-		return -ENOMEM;
-	sd = &state->sd;
-	v4l2_i2c_subdev_init(sd, client, &saa711x_ops);
-
-	hdl = &state->hdl;
-	v4l2_ctrl_handler_init(hdl, 6);
-	/* add in ascending ID order */
-	v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
-			V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
-	v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
-			V4L2_CID_CONTRAST, 0, 127, 1, 64);
-	v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
-			V4L2_CID_SATURATION, 0, 127, 1, 64);
-	v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
-			V4L2_CID_HUE, -128, 127, 1, 0);
-	state->agc = v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
-			V4L2_CID_CHROMA_AGC, 0, 1, 1, 1);
-	state->gain = v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops,
-			V4L2_CID_CHROMA_GAIN, 0, 127, 1, 40);
-	sd->ctrl_handler = hdl;
-	if (hdl->error) {
-		int err = hdl->error;
-
-		v4l2_ctrl_handler_free(hdl);
-		kfree(state);
-		return err;
-	}
-	v4l2_ctrl_auto_cluster(2, &state->agc, 0, true);
-
-	state->input = -1;
-	state->output = SAA7115_IPORT_ON;
-	state->enable = 1;
-	state->radio = 0;
-	switch (chip_id) {
-	case '1':
-		state->ident = V4L2_IDENT_SAA7111;
-		if (saa711x_read(sd, R_00_CHIP_VERSION) & 0xf0) {
-			v4l_info(client, "saa7111a variant found\n");
-			state->ident = V4L2_IDENT_SAA7111A;
-		}
-		break;
-	case '3':
-		state->ident = V4L2_IDENT_SAA7113;
-		break;
-	case '4':
-		state->ident = V4L2_IDENT_SAA7114;
-		break;
-	case '5':
-		state->ident = V4L2_IDENT_SAA7115;
-		break;
-	case '8':
-		state->ident = V4L2_IDENT_SAA7118;
-		break;
-	default:
-		state->ident = V4L2_IDENT_SAA7111;
-		v4l2_info(sd, "WARNING: Chip is not known - Falling back to saa7111\n");
-		break;
-	}
-
-	state->audclk_freq = 48000;
-
-	v4l2_dbg(1, debug, sd, "writing init values\n");
-
-	/* init to 60hz/48khz */
-	state->crystal_freq = SAA7115_FREQ_24_576_MHZ;
-	switch (state->ident) {
-	case V4L2_IDENT_SAA7111:
-	case V4L2_IDENT_SAA7111A:
-		saa711x_writeregs(sd, saa7111_init);
-		break;
-	case V4L2_IDENT_SAA7113:
-		saa711x_writeregs(sd, saa7113_init);
-		break;
-	default:
-		state->crystal_freq = SAA7115_FREQ_32_11_MHZ;
-		saa711x_writeregs(sd, saa7115_init_auto_input);
-	}
-	if (state->ident > V4L2_IDENT_SAA7111A)
-		saa711x_writeregs(sd, saa7115_init_misc);
-	saa711x_set_v4lstd(sd, V4L2_STD_NTSC);
-	v4l2_ctrl_handler_setup(hdl);
-
-	v4l2_dbg(1, debug, sd, "status: (1E) 0x%02x, (1F) 0x%02x\n",
-		saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC),
-		saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC));
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int saa711x_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-
-	v4l2_device_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(sd->ctrl_handler);
-	kfree(to_state(sd));
-	return 0;
-}
-
-static const struct i2c_device_id saa711x_id[] = {
-	{ "saa7115_auto", 1 }, /* autodetect */
-	{ "saa7111", 0 },
-	{ "saa7113", 0 },
-	{ "saa7114", 0 },
-	{ "saa7115", 0 },
-	{ "saa7118", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, saa711x_id);
-
-static struct i2c_driver saa711x_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "saa7115",
-	},
-	.probe		= saa711x_probe,
-	.remove		= saa711x_remove,
-	.id_table	= saa711x_id,
-};
-
-module_i2c_driver(saa711x_driver);
diff --git a/drivers/media/video/saa711x_regs.h b/drivers/media/video/saa711x_regs.h
deleted file mode 100644
index 4e5f2eb..0000000
--- a/drivers/media/video/saa711x_regs.h
+++ /dev/null
@@ -1,549 +0,0 @@
-/* saa711x - Philips SAA711x video decoder register specifications
- *
- * Copyright (c) 2006 Mauro Carvalho Chehab <mchehab@infradead.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#define R_00_CHIP_VERSION                             0x00
-/* Video Decoder */
-	/* Video Decoder - Frontend part */
-#define R_01_INC_DELAY                                0x01
-#define R_02_INPUT_CNTL_1                             0x02
-#define R_03_INPUT_CNTL_2                             0x03
-#define R_04_INPUT_CNTL_3                             0x04
-#define R_05_INPUT_CNTL_4                             0x05
-	/* Video Decoder - Decoder part */
-#define R_06_H_SYNC_START                             0x06
-#define R_07_H_SYNC_STOP                              0x07
-#define R_08_SYNC_CNTL                                0x08
-#define R_09_LUMA_CNTL                                0x09
-#define R_0A_LUMA_BRIGHT_CNTL                         0x0a
-#define R_0B_LUMA_CONTRAST_CNTL                       0x0b
-#define R_0C_CHROMA_SAT_CNTL                          0x0c
-#define R_0D_CHROMA_HUE_CNTL                          0x0d
-#define R_0E_CHROMA_CNTL_1                            0x0e
-#define R_0F_CHROMA_GAIN_CNTL                         0x0f
-#define R_10_CHROMA_CNTL_2                            0x10
-#define R_11_MODE_DELAY_CNTL                          0x11
-#define R_12_RT_SIGNAL_CNTL                           0x12
-#define R_13_RT_X_PORT_OUT_CNTL                       0x13
-#define R_14_ANAL_ADC_COMPAT_CNTL                     0x14
-#define R_15_VGATE_START_FID_CHG                      0x15
-#define R_16_VGATE_STOP                               0x16
-#define R_17_MISC_VGATE_CONF_AND_MSB                  0x17
-#define R_18_RAW_DATA_GAIN_CNTL                       0x18
-#define R_19_RAW_DATA_OFF_CNTL                        0x19
-#define R_1A_COLOR_KILL_LVL_CNTL                      0x1a
-#define R_1B_MISC_TVVCRDET                            0x1b
-#define R_1C_ENHAN_COMB_CTRL1                         0x1c
-#define R_1D_ENHAN_COMB_CTRL2                         0x1d
-#define R_1E_STATUS_BYTE_1_VD_DEC                     0x1e
-#define R_1F_STATUS_BYTE_2_VD_DEC                     0x1f
-
-/* Component processing and interrupt masking part */
-#define R_23_INPUT_CNTL_5                             0x23
-#define R_24_INPUT_CNTL_6                             0x24
-#define R_25_INPUT_CNTL_7                             0x25
-#define R_29_COMP_DELAY                               0x29
-#define R_2A_COMP_BRIGHT_CNTL                         0x2a
-#define R_2B_COMP_CONTRAST_CNTL                       0x2b
-#define R_2C_COMP_SAT_CNTL                            0x2c
-#define R_2D_INTERRUPT_MASK_1                         0x2d
-#define R_2E_INTERRUPT_MASK_2                         0x2e
-#define R_2F_INTERRUPT_MASK_3                         0x2f
-
-/* Audio clock generator part */
-#define R_30_AUD_MAST_CLK_CYCLES_PER_FIELD            0x30
-#define R_34_AUD_MAST_CLK_NOMINAL_INC                 0x34
-#define R_38_CLK_RATIO_AMXCLK_TO_ASCLK                0x38
-#define R_39_CLK_RATIO_ASCLK_TO_ALRCLK                0x39
-#define R_3A_AUD_CLK_GEN_BASIC_SETUP                  0x3a
-
-/* General purpose VBI data slicer part */
-#define R_40_SLICER_CNTL_1                            0x40
-#define R_41_LCR_BASE                                 0x41
-#define R_58_PROGRAM_FRAMING_CODE                     0x58
-#define R_59_H_OFF_FOR_SLICER                         0x59
-#define R_5A_V_OFF_FOR_SLICER                         0x5a
-#define R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF          0x5b
-#define R_5D_DID                                      0x5d
-#define R_5E_SDID                                     0x5e
-#define R_60_SLICER_STATUS_BYTE_0                     0x60
-#define R_61_SLICER_STATUS_BYTE_1                     0x61
-#define R_62_SLICER_STATUS_BYTE_2                     0x62
-
-/* X port, I port and the scaler part */
-	/* Task independent global settings */
-#define R_80_GLOBAL_CNTL_1                            0x80
-#define R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F    0x81
-#define R_83_X_PORT_I_O_ENA_AND_OUT_CLK               0x83
-#define R_84_I_PORT_SIGNAL_DEF                        0x84
-#define R_85_I_PORT_SIGNAL_POLAR                      0x85
-#define R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT          0x86
-#define R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED         0x87
-#define R_88_POWER_SAVE_ADC_PORT_CNTL                 0x88
-#define R_8F_STATUS_INFO_SCALER                       0x8f
-	/* Task A definition */
-		/* Basic settings and acquisition window definition */
-#define R_90_A_TASK_HANDLING_CNTL                     0x90
-#define R_91_A_X_PORT_FORMATS_AND_CONF                0x91
-#define R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL          0x92
-#define R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF         0x93
-#define R_94_A_HORIZ_INPUT_WINDOW_START               0x94
-#define R_95_A_HORIZ_INPUT_WINDOW_START_MSB           0x95
-#define R_96_A_HORIZ_INPUT_WINDOW_LENGTH              0x96
-#define R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB          0x97
-#define R_98_A_VERT_INPUT_WINDOW_START                0x98
-#define R_99_A_VERT_INPUT_WINDOW_START_MSB            0x99
-#define R_9A_A_VERT_INPUT_WINDOW_LENGTH               0x9a
-#define R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB           0x9b
-#define R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH             0x9c
-#define R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB         0x9d
-#define R_9E_A_VERT_OUTPUT_WINDOW_LENGTH              0x9e
-#define R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB          0x9f
-		/* FIR filtering and prescaling */
-#define R_A0_A_HORIZ_PRESCALING                       0xa0
-#define R_A1_A_ACCUMULATION_LENGTH                    0xa1
-#define R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER    0xa2
-#define R_A4_A_LUMA_BRIGHTNESS_CNTL                   0xa4
-#define R_A5_A_LUMA_CONTRAST_CNTL                     0xa5
-#define R_A6_A_CHROMA_SATURATION_CNTL                 0xa6
-		/* Horizontal phase scaling */
-#define R_A8_A_HORIZ_LUMA_SCALING_INC                 0xa8
-#define R_A9_A_HORIZ_LUMA_SCALING_INC_MSB             0xa9
-#define R_AA_A_HORIZ_LUMA_PHASE_OFF                   0xaa
-#define R_AC_A_HORIZ_CHROMA_SCALING_INC               0xac
-#define R_AD_A_HORIZ_CHROMA_SCALING_INC_MSB           0xad
-#define R_AE_A_HORIZ_CHROMA_PHASE_OFF                 0xae
-#define R_AF_A_HORIZ_CHROMA_PHASE_OFF_MSB             0xaf
-		/* Vertical scaling */
-#define R_B0_A_VERT_LUMA_SCALING_INC                  0xb0
-#define R_B1_A_VERT_LUMA_SCALING_INC_MSB              0xb1
-#define R_B2_A_VERT_CHROMA_SCALING_INC                0xb2
-#define R_B3_A_VERT_CHROMA_SCALING_INC_MSB            0xb3
-#define R_B4_A_VERT_SCALING_MODE_CNTL                 0xb4
-#define R_B8_A_VERT_CHROMA_PHASE_OFF_00               0xb8
-#define R_B9_A_VERT_CHROMA_PHASE_OFF_01               0xb9
-#define R_BA_A_VERT_CHROMA_PHASE_OFF_10               0xba
-#define R_BB_A_VERT_CHROMA_PHASE_OFF_11               0xbb
-#define R_BC_A_VERT_LUMA_PHASE_OFF_00                 0xbc
-#define R_BD_A_VERT_LUMA_PHASE_OFF_01                 0xbd
-#define R_BE_A_VERT_LUMA_PHASE_OFF_10                 0xbe
-#define R_BF_A_VERT_LUMA_PHASE_OFF_11                 0xbf
-	/* Task B definition */
-		/* Basic settings and acquisition window definition */
-#define R_C0_B_TASK_HANDLING_CNTL                     0xc0
-#define R_C1_B_X_PORT_FORMATS_AND_CONF                0xc1
-#define R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION      0xc2
-#define R_C3_B_I_PORT_FORMATS_AND_CONF                0xc3
-#define R_C4_B_HORIZ_INPUT_WINDOW_START               0xc4
-#define R_C5_B_HORIZ_INPUT_WINDOW_START_MSB           0xc5
-#define R_C6_B_HORIZ_INPUT_WINDOW_LENGTH              0xc6
-#define R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB          0xc7
-#define R_C8_B_VERT_INPUT_WINDOW_START                0xc8
-#define R_C9_B_VERT_INPUT_WINDOW_START_MSB            0xc9
-#define R_CA_B_VERT_INPUT_WINDOW_LENGTH               0xca
-#define R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB           0xcb
-#define R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH             0xcc
-#define R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB         0xcd
-#define R_CE_B_VERT_OUTPUT_WINDOW_LENGTH              0xce
-#define R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB          0xcf
-		/* FIR filtering and prescaling */
-#define R_D0_B_HORIZ_PRESCALING                       0xd0
-#define R_D1_B_ACCUMULATION_LENGTH                    0xd1
-#define R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER    0xd2
-#define R_D4_B_LUMA_BRIGHTNESS_CNTL                   0xd4
-#define R_D5_B_LUMA_CONTRAST_CNTL                     0xd5
-#define R_D6_B_CHROMA_SATURATION_CNTL                 0xd6
-		/* Horizontal phase scaling */
-#define R_D8_B_HORIZ_LUMA_SCALING_INC                 0xd8
-#define R_D9_B_HORIZ_LUMA_SCALING_INC_MSB             0xd9
-#define R_DA_B_HORIZ_LUMA_PHASE_OFF                   0xda
-#define R_DC_B_HORIZ_CHROMA_SCALING                   0xdc
-#define R_DD_B_HORIZ_CHROMA_SCALING_MSB               0xdd
-#define R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA              0xde
-		/* Vertical scaling */
-#define R_E0_B_VERT_LUMA_SCALING_INC                  0xe0
-#define R_E1_B_VERT_LUMA_SCALING_INC_MSB              0xe1
-#define R_E2_B_VERT_CHROMA_SCALING_INC                0xe2
-#define R_E3_B_VERT_CHROMA_SCALING_INC_MSB            0xe3
-#define R_E4_B_VERT_SCALING_MODE_CNTL                 0xe4
-#define R_E8_B_VERT_CHROMA_PHASE_OFF_00               0xe8
-#define R_E9_B_VERT_CHROMA_PHASE_OFF_01               0xe9
-#define R_EA_B_VERT_CHROMA_PHASE_OFF_10               0xea
-#define R_EB_B_VERT_CHROMA_PHASE_OFF_11               0xeb
-#define R_EC_B_VERT_LUMA_PHASE_OFF_00                 0xec
-#define R_ED_B_VERT_LUMA_PHASE_OFF_01                 0xed
-#define R_EE_B_VERT_LUMA_PHASE_OFF_10                 0xee
-#define R_EF_B_VERT_LUMA_PHASE_OFF_11                 0xef
-
-/* second PLL (PLL2) and Pulsegenerator Programming */
-#define R_F0_LFCO_PER_LINE                            0xf0
-#define R_F1_P_I_PARAM_SELECT                         0xf1
-#define R_F2_NOMINAL_PLL2_DTO                         0xf2
-#define R_F3_PLL_INCREMENT                            0xf3
-#define R_F4_PLL2_STATUS                              0xf4
-#define R_F5_PULSGEN_LINE_LENGTH                      0xf5
-#define R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG      0xf6
-#define R_F7_PULSE_A_POS_MSB                          0xf7
-#define R_F8_PULSE_B_POS                              0xf8
-#define R_F9_PULSE_B_POS_MSB                          0xf9
-#define R_FA_PULSE_C_POS                              0xfa
-#define R_FB_PULSE_C_POS_MSB                          0xfb
-#define R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES     0xff
-
-#if 0
-/* Those structs will be used in the future for debug purposes */
-struct saa711x_reg_descr {
-	u8 reg;
-	int count;
-	char *name;
-};
-
-struct saa711x_reg_descr saa711x_regs[] = {
-	/* REG COUNT NAME */
-	{R_00_CHIP_VERSION,1,
-	 "Chip version"},
-
-	/* Video Decoder: R_01_INC_DELAY to R_1F_STATUS_BYTE_2_VD_DEC */
-
-	/* Video Decoder - Frontend part: R_01_INC_DELAY to R_05_INPUT_CNTL_4 */
-	{R_01_INC_DELAY,1,
-	 "Increment delay"},
-	{R_02_INPUT_CNTL_1,1,
-	 "Analog input control 1"},
-	{R_03_INPUT_CNTL_2,1,
-	 "Analog input control 2"},
-	{R_04_INPUT_CNTL_3,1,
-	 "Analog input control 3"},
-	{R_05_INPUT_CNTL_4,1,
-	 "Analog input control 4"},
-
-	/* Video Decoder - Decoder part: R_06_H_SYNC_START to R_1F_STATUS_BYTE_2_VD_DEC */
-	{R_06_H_SYNC_START,1,
-	 "Horizontal sync start"},
-	{R_07_H_SYNC_STOP,1,
-	 "Horizontal sync stop"},
-	{R_08_SYNC_CNTL,1,
-	 "Sync control"},
-	{R_09_LUMA_CNTL,1,
-	 "Luminance control"},
-	{R_0A_LUMA_BRIGHT_CNTL,1,
-	 "Luminance brightness control"},
-	{R_0B_LUMA_CONTRAST_CNTL,1,
-	 "Luminance contrast control"},
-	{R_0C_CHROMA_SAT_CNTL,1,
-	 "Chrominance saturation control"},
-	{R_0D_CHROMA_HUE_CNTL,1,
-	 "Chrominance hue control"},
-	{R_0E_CHROMA_CNTL_1,1,
-	 "Chrominance control 1"},
-	{R_0F_CHROMA_GAIN_CNTL,1,
-	 "Chrominance gain control"},
-	{R_10_CHROMA_CNTL_2,1,
-	 "Chrominance control 2"},
-	{R_11_MODE_DELAY_CNTL,1,
-	 "Mode/delay control"},
-	{R_12_RT_SIGNAL_CNTL,1,
-	 "RT signal control"},
-	{R_13_RT_X_PORT_OUT_CNTL,1,
-	 "RT/X port output control"},
-	{R_14_ANAL_ADC_COMPAT_CNTL,1,
-	 "Analog/ADC/compatibility control"},
-	{R_15_VGATE_START_FID_CHG,  1,
-	 "VGATE start FID change"},
-	{R_16_VGATE_STOP,1,
-	 "VGATE stop"},
-	{R_17_MISC_VGATE_CONF_AND_MSB,  1,
-	 "Miscellaneous VGATE configuration and MSBs"},
-	{R_18_RAW_DATA_GAIN_CNTL,1,
-	 "Raw data gain control",},
-	{R_19_RAW_DATA_OFF_CNTL,1,
-	 "Raw data offset control",},
-	{R_1A_COLOR_KILL_LVL_CNTL,1,
-	 "Color Killer Level Control"},
-	{ R_1B_MISC_TVVCRDET, 1,
-	  "MISC /TVVCRDET"},
-	{ R_1C_ENHAN_COMB_CTRL1, 1,
-	 "Enhanced comb ctrl1"},
-	{ R_1D_ENHAN_COMB_CTRL2, 1,
-	 "Enhanced comb ctrl1"},
-	{R_1E_STATUS_BYTE_1_VD_DEC,1,
-	 "Status byte 1 video decoder"},
-	{R_1F_STATUS_BYTE_2_VD_DEC,1,
-	 "Status byte 2 video decoder"},
-
-	/* Component processing and interrupt masking part:  0x20h to R_2F_INTERRUPT_MASK_3 */
-	/* 0x20 to 0x22 - Reserved */
-	{R_23_INPUT_CNTL_5,1,
-	 "Analog input control 5"},
-	{R_24_INPUT_CNTL_6,1,
-	 "Analog input control 6"},
-	{R_25_INPUT_CNTL_7,1,
-	 "Analog input control 7"},
-	/* 0x26 to 0x28 - Reserved */
-	{R_29_COMP_DELAY,1,
-	 "Component delay"},
-	{R_2A_COMP_BRIGHT_CNTL,1,
-	 "Component brightness control"},
-	{R_2B_COMP_CONTRAST_CNTL,1,
-	 "Component contrast control"},
-	{R_2C_COMP_SAT_CNTL,1,
-	 "Component saturation control"},
-	{R_2D_INTERRUPT_MASK_1,1,
-	 "Interrupt mask 1"},
-	{R_2E_INTERRUPT_MASK_2,1,
-	 "Interrupt mask 2"},
-	{R_2F_INTERRUPT_MASK_3,1,
-	 "Interrupt mask 3"},
-
-	/* Audio clock generator part: R_30_AUD_MAST_CLK_CYCLES_PER_FIELD to 0x3f */
-	{R_30_AUD_MAST_CLK_CYCLES_PER_FIELD,3,
-	 "Audio master clock cycles per field"},
-	/* 0x33 - Reserved */
-	{R_34_AUD_MAST_CLK_NOMINAL_INC,3,
-	 "Audio master clock nominal increment"},
-	/* 0x37 - Reserved */
-	{R_38_CLK_RATIO_AMXCLK_TO_ASCLK,1,
-	 "Clock ratio AMXCLK to ASCLK"},
-	{R_39_CLK_RATIO_ASCLK_TO_ALRCLK,1,
-	 "Clock ratio ASCLK to ALRCLK"},
-	{R_3A_AUD_CLK_GEN_BASIC_SETUP,1,
-	 "Audio clock generator basic setup"},
-	/* 0x3b-0x3f - Reserved */
-
-	/* General purpose VBI data slicer part: R_40_SLICER_CNTL_1 to 0x7f */
-	{R_40_SLICER_CNTL_1,1,
-	 "Slicer control 1"},
-	{R_41_LCR,23,
-	 "R_41_LCR"},
-	{R_58_PROGRAM_FRAMING_CODE,1,
-	 "Programmable framing code"},
-	{R_59_H_OFF_FOR_SLICER,1,
-	 "Horizontal offset for slicer"},
-	{R_5A_V_OFF_FOR_SLICER,1,
-	 "Vertical offset for slicer"},
-	{R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF,1,
-	 "Field offset and MSBs for horizontal and vertical offset"},
-	{R_5D_DID,1,
-	 "Header and data identification (R_5D_DID)"},
-	{R_5E_SDID,1,
-	 "Sliced data identification (R_5E_SDID) code"},
-	{R_60_SLICER_STATUS_BYTE_0,1,
-	 "Slicer status byte 0"},
-	{R_61_SLICER_STATUS_BYTE_1,1,
-	 "Slicer status byte 1"},
-	{R_62_SLICER_STATUS_BYTE_2,1,
-	 "Slicer status byte 2"},
-	/* 0x63-0x7f - Reserved */
-
-	/* X port, I port and the scaler part: R_80_GLOBAL_CNTL_1 to R_EF_B_VERT_LUMA_PHASE_OFF_11 */
-	/* Task independent global settings: R_80_GLOBAL_CNTL_1 to R_8F_STATUS_INFO_SCALER */
-	{R_80_GLOBAL_CNTL_1,1,
-	 "Global control 1"},
-	{R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F,1,
-	 "Vertical sync and Field ID source selection, retimed V and F signals"},
-	/* 0x82 - Reserved */
-	{R_83_X_PORT_I_O_ENA_AND_OUT_CLK,1,
-	 "X port I/O enable and output clock"},
-	{R_84_I_PORT_SIGNAL_DEF,1,
-	 "I port signal definitions"},
-	{R_85_I_PORT_SIGNAL_POLAR,1,
-	 "I port signal polarities"},
-	{R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT,1,
-	 "I port FIFO flag control and arbitration"},
-	{R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED,  1,
-	 "I port I/O enable output clock and gated"},
-	{R_88_POWER_SAVE_ADC_PORT_CNTL,1,
-	 "Power save/ADC port control"},
-	/* 089-0x8e - Reserved */
-	{R_8F_STATUS_INFO_SCALER,1,
-	 "Status information scaler part"},
-
-	/* Task A definition: R_90_A_TASK_HANDLING_CNTL to R_BF_A_VERT_LUMA_PHASE_OFF_11 */
-	/* Task A: Basic settings and acquisition window definition */
-	{R_90_A_TASK_HANDLING_CNTL,1,
-	 "Task A: Task handling control"},
-	{R_91_A_X_PORT_FORMATS_AND_CONF,1,
-	 "Task A: X port formats and configuration"},
-	{R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL,1,
-	 "Task A: X port input reference signal definition"},
-	{R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF,1,
-	 "Task A: I port output formats and configuration"},
-	{R_94_A_HORIZ_INPUT_WINDOW_START,2,
-	 "Task A: Horizontal input window start"},
-	{R_96_A_HORIZ_INPUT_WINDOW_LENGTH,2,
-	 "Task A: Horizontal input window length"},
-	{R_98_A_VERT_INPUT_WINDOW_START,2,
-	 "Task A: Vertical input window start"},
-	{R_9A_A_VERT_INPUT_WINDOW_LENGTH,2,
-	 "Task A: Vertical input window length"},
-	{R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH,2,
-	 "Task A: Horizontal output window length"},
-	{R_9E_A_VERT_OUTPUT_WINDOW_LENGTH,2,
-	 "Task A: Vertical output window length"},
-
-	/* Task A: FIR filtering and prescaling */
-	{R_A0_A_HORIZ_PRESCALING,1,
-	 "Task A: Horizontal prescaling"},
-	{R_A1_A_ACCUMULATION_LENGTH,1,
-	 "Task A: Accumulation length"},
-	{R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER,1,
-	 "Task A: Prescaler DC gain and FIR prefilter"},
-	/* 0xa3 - Reserved */
-	{R_A4_A_LUMA_BRIGHTNESS_CNTL,1,
-	 "Task A: Luminance brightness control"},
-	{R_A5_A_LUMA_CONTRAST_CNTL,1,
-	 "Task A: Luminance contrast control"},
-	{R_A6_A_CHROMA_SATURATION_CNTL,1,
-	 "Task A: Chrominance saturation control"},
-	/* 0xa7 - Reserved */
-
-	/* Task A: Horizontal phase scaling */
-	{R_A8_A_HORIZ_LUMA_SCALING_INC,2,
-	 "Task A: Horizontal luminance scaling increment"},
-	{R_AA_A_HORIZ_LUMA_PHASE_OFF,1,
-	 "Task A: Horizontal luminance phase offset"},
-	/* 0xab - Reserved */
-	{R_AC_A_HORIZ_CHROMA_SCALING_INC,2,
-	 "Task A: Horizontal chrominance scaling increment"},
-	{R_AE_A_HORIZ_CHROMA_PHASE_OFF,1,
-	 "Task A: Horizontal chrominance phase offset"},
-	/* 0xaf - Reserved */
-
-	/* Task A: Vertical scaling */
-	{R_B0_A_VERT_LUMA_SCALING_INC,2,
-	 "Task A: Vertical luminance scaling increment"},
-	{R_B2_A_VERT_CHROMA_SCALING_INC,2,
-	 "Task A: Vertical chrominance scaling increment"},
-	{R_B4_A_VERT_SCALING_MODE_CNTL,1,
-	 "Task A: Vertical scaling mode control"},
-	/* 0xb5-0xb7 - Reserved */
-	{R_B8_A_VERT_CHROMA_PHASE_OFF_00,1,
-	 "Task A: Vertical chrominance phase offset '00'"},
-	{R_B9_A_VERT_CHROMA_PHASE_OFF_01,1,
-	 "Task A: Vertical chrominance phase offset '01'"},
-	{R_BA_A_VERT_CHROMA_PHASE_OFF_10,1,
-	 "Task A: Vertical chrominance phase offset '10'"},
-	{R_BB_A_VERT_CHROMA_PHASE_OFF_11,1,
-	 "Task A: Vertical chrominance phase offset '11'"},
-	{R_BC_A_VERT_LUMA_PHASE_OFF_00,1,
-	 "Task A: Vertical luminance phase offset '00'"},
-	{R_BD_A_VERT_LUMA_PHASE_OFF_01,1,
-	 "Task A: Vertical luminance phase offset '01'"},
-	{R_BE_A_VERT_LUMA_PHASE_OFF_10,1,
-	 "Task A: Vertical luminance phase offset '10'"},
-	{R_BF_A_VERT_LUMA_PHASE_OFF_11,1,
-	 "Task A: Vertical luminance phase offset '11'"},
-
-	/* Task B definition: R_C0_B_TASK_HANDLING_CNTL to R_EF_B_VERT_LUMA_PHASE_OFF_11 */
-	/* Task B: Basic settings and acquisition window definition */
-	{R_C0_B_TASK_HANDLING_CNTL,1,
-	 "Task B: Task handling control"},
-	{R_C1_B_X_PORT_FORMATS_AND_CONF,1,
-	 "Task B: X port formats and configuration"},
-	{R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION,1,
-	 "Task B: Input reference signal definition"},
-	{R_C3_B_I_PORT_FORMATS_AND_CONF,1,
-	 "Task B: I port formats and configuration"},
-	{R_C4_B_HORIZ_INPUT_WINDOW_START,2,
-	 "Task B: Horizontal input window start"},
-	{R_C6_B_HORIZ_INPUT_WINDOW_LENGTH,2,
-	 "Task B: Horizontal input window length"},
-	{R_C8_B_VERT_INPUT_WINDOW_START,2,
-	 "Task B: Vertical input window start"},
-	{R_CA_B_VERT_INPUT_WINDOW_LENGTH,2,
-	 "Task B: Vertical input window length"},
-	{R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH,2,
-	 "Task B: Horizontal output window length"},
-	{R_CE_B_VERT_OUTPUT_WINDOW_LENGTH,2,
-	 "Task B: Vertical output window length"},
-
-	/* Task B: FIR filtering and prescaling */
-	{R_D0_B_HORIZ_PRESCALING,1,
-	 "Task B: Horizontal prescaling"},
-	{R_D1_B_ACCUMULATION_LENGTH,1,
-	 "Task B: Accumulation length"},
-	{R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER,1,
-	 "Task B: Prescaler DC gain and FIR prefilter"},
-	/* 0xd3 - Reserved */
-	{R_D4_B_LUMA_BRIGHTNESS_CNTL,1,
-	 "Task B: Luminance brightness control"},
-	{R_D5_B_LUMA_CONTRAST_CNTL,1,
-	 "Task B: Luminance contrast control"},
-	{R_D6_B_CHROMA_SATURATION_CNTL,1,
-	 "Task B: Chrominance saturation control"},
-	/* 0xd7 - Reserved */
-
-	/* Task B: Horizontal phase scaling */
-	{R_D8_B_HORIZ_LUMA_SCALING_INC,2,
-	 "Task B: Horizontal luminance scaling increment"},
-	{R_DA_B_HORIZ_LUMA_PHASE_OFF,1,
-	 "Task B: Horizontal luminance phase offset"},
-	/* 0xdb - Reserved */
-	{R_DC_B_HORIZ_CHROMA_SCALING,2,
-	 "Task B: Horizontal chrominance scaling"},
-	{R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA,1,
-	 "Task B: Horizontal Phase Offset Chroma"},
-	/* 0xdf - Reserved */
-
-	/* Task B: Vertical scaling */
-	{R_E0_B_VERT_LUMA_SCALING_INC,2,
-	 "Task B: Vertical luminance scaling increment"},
-	{R_E2_B_VERT_CHROMA_SCALING_INC,2,
-	 "Task B: Vertical chrominance scaling increment"},
-	{R_E4_B_VERT_SCALING_MODE_CNTL,1,
-	 "Task B: Vertical scaling mode control"},
-	/* 0xe5-0xe7 - Reserved */
-	{R_E8_B_VERT_CHROMA_PHASE_OFF_00,1,
-	 "Task B: Vertical chrominance phase offset '00'"},
-	{R_E9_B_VERT_CHROMA_PHASE_OFF_01,1,
-	 "Task B: Vertical chrominance phase offset '01'"},
-	{R_EA_B_VERT_CHROMA_PHASE_OFF_10,1,
-	 "Task B: Vertical chrominance phase offset '10'"},
-	{R_EB_B_VERT_CHROMA_PHASE_OFF_11,1,
-	 "Task B: Vertical chrominance phase offset '11'"},
-	{R_EC_B_VERT_LUMA_PHASE_OFF_00,1,
-	 "Task B: Vertical luminance phase offset '00'"},
-	{R_ED_B_VERT_LUMA_PHASE_OFF_01,1,
-	 "Task B: Vertical luminance phase offset '01'"},
-	{R_EE_B_VERT_LUMA_PHASE_OFF_10,1,
-	 "Task B: Vertical luminance phase offset '10'"},
-	{R_EF_B_VERT_LUMA_PHASE_OFF_11,1,
-	 "Task B: Vertical luminance phase offset '11'"},
-
-	/* second PLL (PLL2) and Pulsegenerator Programming */
-	{ R_F0_LFCO_PER_LINE, 1,
-	  "LFCO's per line"},
-	{ R_F1_P_I_PARAM_SELECT,1,
-	  "P-/I- Param. Select., PLL Mode, PLL H-Src., LFCO's per line"},
-	{ R_F2_NOMINAL_PLL2_DTO,1,
-	 "Nominal PLL2 DTO"},
-	{R_F3_PLL_INCREMENT,1,
-	 "PLL2 Increment"},
-	{R_F4_PLL2_STATUS,1,
-	 "PLL2 Status"},
-	{R_F5_PULSGEN_LINE_LENGTH,1,
-	 "Pulsgen. line length"},
-	{R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG,1,
-	 "Pulse A Position, Pulsgen Resync., Pulsgen. H-Src., Pulsgen. line length"},
-	{R_F7_PULSE_A_POS_MSB,1,
-	 "Pulse A Position"},
-	{R_F8_PULSE_B_POS,2,
-	 "Pulse B Position"},
-	{R_FA_PULSE_C_POS,2,
-	 "Pulse C Position"},
-	/* 0xfc to 0xfe - Reserved */
-	{R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES,1,
-	 "S_PLL max. phase, error threshold, PLL2 no. of lines, threshold"},
-};
-#endif
diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c
deleted file mode 100644
index 8ecb656..0000000
--- a/drivers/media/video/saa7127.c
+++ /dev/null
@@ -1,852 +0,0 @@
-/*
- * saa7127 - Philips SAA7127/SAA7129 video encoder driver
- *
- * Copyright (C) 2003 Roy Bulter <rbulter@hetnet.nl>
- *
- * Based on SAA7126 video encoder driver by Gillem & Andreas Oberritter
- *
- * Copyright (C) 2000-2001 Gillem <htoa@gmx.net>
- * Copyright (C) 2002 Andreas Oberritter <obi@saftware.de>
- *
- * Based on Stadis 4:2:2 MPEG-2 Decoder Driver by Nathan Laredo
- *
- * Copyright (C) 1999 Nathan Laredo <laredo@gnu.org>
- *
- * This driver is designed for the Hauppauge 250/350 Linux driver
- * from the ivtv Project
- *
- * Copyright (C) 2003 Kevin Thayer <nufan_wfk@yahoo.com>
- *
- * Dual output support:
- * Copyright (C) 2004 Eric Varsanyi
- *
- * NTSC Tuning and 7.5 IRE Setup
- * Copyright (C) 2004  Chris Kennedy <c@groovy.org>
- *
- * VBI additions & cleanup:
- * Copyright (C) 2004, 2005 Hans Verkuil <hverkuil@xs4all.nl>
- *
- * Note: the saa7126 is identical to the saa7127, and the saa7128 is
- * identical to the saa7129, except that the saa7126 and saa7128 have
- * macrovision anti-taping support. This driver will almost certainly
- * work fine for those chips, except of course for the missing anti-taping
- * support.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/saa7127.h>
-
-static int debug;
-static int test_image;
-
-MODULE_DESCRIPTION("Philips SAA7127/9 video encoder driver");
-MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil");
-MODULE_LICENSE("GPL");
-module_param(debug, int, 0644);
-module_param(test_image, int, 0644);
-MODULE_PARM_DESC(debug, "debug level (0-2)");
-MODULE_PARM_DESC(test_image, "test_image (0-1)");
-
-
-/*
- * SAA7127 registers
- */
-
-#define SAA7127_REG_STATUS                           0x00
-#define SAA7127_REG_WIDESCREEN_CONFIG                0x26
-#define SAA7127_REG_WIDESCREEN_ENABLE                0x27
-#define SAA7127_REG_BURST_START                      0x28
-#define SAA7127_REG_BURST_END                        0x29
-#define SAA7127_REG_COPYGEN_0                        0x2a
-#define SAA7127_REG_COPYGEN_1                        0x2b
-#define SAA7127_REG_COPYGEN_2                        0x2c
-#define SAA7127_REG_OUTPUT_PORT_CONTROL              0x2d
-#define SAA7127_REG_GAIN_LUMINANCE_RGB               0x38
-#define SAA7127_REG_GAIN_COLORDIFF_RGB               0x39
-#define SAA7127_REG_INPUT_PORT_CONTROL_1             0x3a
-#define SAA7129_REG_FADE_KEY_COL2		     0x4f
-#define SAA7127_REG_CHROMA_PHASE                     0x5a
-#define SAA7127_REG_GAINU                            0x5b
-#define SAA7127_REG_GAINV                            0x5c
-#define SAA7127_REG_BLACK_LEVEL                      0x5d
-#define SAA7127_REG_BLANKING_LEVEL                   0x5e
-#define SAA7127_REG_VBI_BLANKING                     0x5f
-#define SAA7127_REG_DAC_CONTROL                      0x61
-#define SAA7127_REG_BURST_AMP                        0x62
-#define SAA7127_REG_SUBC3                            0x63
-#define SAA7127_REG_SUBC2                            0x64
-#define SAA7127_REG_SUBC1                            0x65
-#define SAA7127_REG_SUBC0                            0x66
-#define SAA7127_REG_LINE_21_ODD_0                    0x67
-#define SAA7127_REG_LINE_21_ODD_1                    0x68
-#define SAA7127_REG_LINE_21_EVEN_0                   0x69
-#define SAA7127_REG_LINE_21_EVEN_1                   0x6a
-#define SAA7127_REG_RCV_PORT_CONTROL                 0x6b
-#define SAA7127_REG_VTRIG                            0x6c
-#define SAA7127_REG_HTRIG_HI                         0x6d
-#define SAA7127_REG_MULTI                            0x6e
-#define SAA7127_REG_CLOSED_CAPTION                   0x6f
-#define SAA7127_REG_RCV2_OUTPUT_START                0x70
-#define SAA7127_REG_RCV2_OUTPUT_END                  0x71
-#define SAA7127_REG_RCV2_OUTPUT_MSBS                 0x72
-#define SAA7127_REG_TTX_REQUEST_H_START              0x73
-#define SAA7127_REG_TTX_REQUEST_H_DELAY_LENGTH       0x74
-#define SAA7127_REG_CSYNC_ADVANCE_VSYNC_SHIFT        0x75
-#define SAA7127_REG_TTX_ODD_REQ_VERT_START           0x76
-#define SAA7127_REG_TTX_ODD_REQ_VERT_END             0x77
-#define SAA7127_REG_TTX_EVEN_REQ_VERT_START          0x78
-#define SAA7127_REG_TTX_EVEN_REQ_VERT_END            0x79
-#define SAA7127_REG_FIRST_ACTIVE                     0x7a
-#define SAA7127_REG_LAST_ACTIVE                      0x7b
-#define SAA7127_REG_MSB_VERTICAL                     0x7c
-#define SAA7127_REG_DISABLE_TTX_LINE_LO_0            0x7e
-#define SAA7127_REG_DISABLE_TTX_LINE_LO_1            0x7f
-
-/*
- **********************************************************************
- *
- *  Arrays with configuration parameters for the SAA7127
- *
- **********************************************************************
- */
-
-struct i2c_reg_value {
-	unsigned char reg;
-	unsigned char value;
-};
-
-static const struct i2c_reg_value saa7129_init_config_extra[] = {
-	{ SAA7127_REG_OUTPUT_PORT_CONTROL, 		0x38 },
-	{ SAA7127_REG_VTRIG, 				0xfa },
-	{ 0, 0 }
-};
-
-static const struct i2c_reg_value saa7127_init_config_common[] = {
-	{ SAA7127_REG_WIDESCREEN_CONFIG, 		0x0d },
-	{ SAA7127_REG_WIDESCREEN_ENABLE, 		0x00 },
-	{ SAA7127_REG_COPYGEN_0, 			0x77 },
-	{ SAA7127_REG_COPYGEN_1, 			0x41 },
-	{ SAA7127_REG_COPYGEN_2, 			0x00 },	/* Macrovision enable/disable */
-	{ SAA7127_REG_OUTPUT_PORT_CONTROL, 		0xbf },
-	{ SAA7127_REG_GAIN_LUMINANCE_RGB, 		0x00 },
-	{ SAA7127_REG_GAIN_COLORDIFF_RGB, 		0x00 },
-	{ SAA7127_REG_INPUT_PORT_CONTROL_1, 		0x80 },	/* for color bars */
-	{ SAA7127_REG_LINE_21_ODD_0, 			0x77 },
-	{ SAA7127_REG_LINE_21_ODD_1, 			0x41 },
-	{ SAA7127_REG_LINE_21_EVEN_0, 			0x88 },
-	{ SAA7127_REG_LINE_21_EVEN_1, 			0x41 },
-	{ SAA7127_REG_RCV_PORT_CONTROL, 		0x12 },
-	{ SAA7127_REG_VTRIG, 				0xf9 },
-	{ SAA7127_REG_HTRIG_HI, 			0x00 },
-	{ SAA7127_REG_RCV2_OUTPUT_START, 		0x41 },
-	{ SAA7127_REG_RCV2_OUTPUT_END, 			0xc3 },
-	{ SAA7127_REG_RCV2_OUTPUT_MSBS, 		0x00 },
-	{ SAA7127_REG_TTX_REQUEST_H_START, 		0x3e },
-	{ SAA7127_REG_TTX_REQUEST_H_DELAY_LENGTH, 	0xb8 },
-	{ SAA7127_REG_CSYNC_ADVANCE_VSYNC_SHIFT,  	0x03 },
-	{ SAA7127_REG_TTX_ODD_REQ_VERT_START, 		0x15 },
-	{ SAA7127_REG_TTX_ODD_REQ_VERT_END, 		0x16 },
-	{ SAA7127_REG_TTX_EVEN_REQ_VERT_START, 		0x15 },
-	{ SAA7127_REG_TTX_EVEN_REQ_VERT_END, 		0x16 },
-	{ SAA7127_REG_FIRST_ACTIVE, 			0x1a },
-	{ SAA7127_REG_LAST_ACTIVE, 			0x01 },
-	{ SAA7127_REG_MSB_VERTICAL, 			0xc0 },
-	{ SAA7127_REG_DISABLE_TTX_LINE_LO_0, 		0x00 },
-	{ SAA7127_REG_DISABLE_TTX_LINE_LO_1, 		0x00 },
-	{ 0, 0 }
-};
-
-#define SAA7127_60HZ_DAC_CONTROL 0x15
-static const struct i2c_reg_value saa7127_init_config_60hz[] = {
-	{ SAA7127_REG_BURST_START, 			0x19 },
-	/* BURST_END is also used as a chip ID in saa7127_probe */
-	{ SAA7127_REG_BURST_END, 			0x1d },
-	{ SAA7127_REG_CHROMA_PHASE, 			0xa3 },
-	{ SAA7127_REG_GAINU, 				0x98 },
-	{ SAA7127_REG_GAINV, 				0xd3 },
-	{ SAA7127_REG_BLACK_LEVEL, 			0x39 },
-	{ SAA7127_REG_BLANKING_LEVEL, 			0x2e },
-	{ SAA7127_REG_VBI_BLANKING, 			0x2e },
-	{ SAA7127_REG_DAC_CONTROL, 			0x15 },
-	{ SAA7127_REG_BURST_AMP, 			0x4d },
-	{ SAA7127_REG_SUBC3, 				0x1f },
-	{ SAA7127_REG_SUBC2, 				0x7c },
-	{ SAA7127_REG_SUBC1, 				0xf0 },
-	{ SAA7127_REG_SUBC0, 				0x21 },
-	{ SAA7127_REG_MULTI, 				0x90 },
-	{ SAA7127_REG_CLOSED_CAPTION, 			0x11 },
-	{ 0, 0 }
-};
-
-#define SAA7127_50HZ_PAL_DAC_CONTROL 0x02
-static struct i2c_reg_value saa7127_init_config_50hz_pal[] = {
-	{ SAA7127_REG_BURST_START, 			0x21 },
-	/* BURST_END is also used as a chip ID in saa7127_probe */
-	{ SAA7127_REG_BURST_END, 			0x1d },
-	{ SAA7127_REG_CHROMA_PHASE, 			0x3f },
-	{ SAA7127_REG_GAINU, 				0x7d },
-	{ SAA7127_REG_GAINV, 				0xaf },
-	{ SAA7127_REG_BLACK_LEVEL, 			0x33 },
-	{ SAA7127_REG_BLANKING_LEVEL, 			0x35 },
-	{ SAA7127_REG_VBI_BLANKING, 			0x35 },
-	{ SAA7127_REG_DAC_CONTROL, 			0x02 },
-	{ SAA7127_REG_BURST_AMP, 			0x2f },
-	{ SAA7127_REG_SUBC3, 				0xcb },
-	{ SAA7127_REG_SUBC2, 				0x8a },
-	{ SAA7127_REG_SUBC1, 				0x09 },
-	{ SAA7127_REG_SUBC0, 				0x2a },
-	{ SAA7127_REG_MULTI, 				0xa0 },
-	{ SAA7127_REG_CLOSED_CAPTION, 			0x00 },
-	{ 0, 0 }
-};
-
-#define SAA7127_50HZ_SECAM_DAC_CONTROL 0x08
-static struct i2c_reg_value saa7127_init_config_50hz_secam[] = {
-	{ SAA7127_REG_BURST_START, 			0x21 },
-	/* BURST_END is also used as a chip ID in saa7127_probe */
-	{ SAA7127_REG_BURST_END, 			0x1d },
-	{ SAA7127_REG_CHROMA_PHASE, 			0x3f },
-	{ SAA7127_REG_GAINU, 				0x6a },
-	{ SAA7127_REG_GAINV, 				0x81 },
-	{ SAA7127_REG_BLACK_LEVEL, 			0x33 },
-	{ SAA7127_REG_BLANKING_LEVEL, 			0x35 },
-	{ SAA7127_REG_VBI_BLANKING, 			0x35 },
-	{ SAA7127_REG_DAC_CONTROL, 			0x08 },
-	{ SAA7127_REG_BURST_AMP, 			0x2f },
-	{ SAA7127_REG_SUBC3, 				0xb2 },
-	{ SAA7127_REG_SUBC2, 				0x3b },
-	{ SAA7127_REG_SUBC1, 				0xa3 },
-	{ SAA7127_REG_SUBC0, 				0x28 },
-	{ SAA7127_REG_MULTI, 				0x90 },
-	{ SAA7127_REG_CLOSED_CAPTION, 			0x00 },
-	{ 0, 0 }
-};
-
-/*
- **********************************************************************
- *
- *  Encoder Struct, holds the configuration state of the encoder
- *
- **********************************************************************
- */
-
-struct saa7127_state {
-	struct v4l2_subdev sd;
-	v4l2_std_id std;
-	u32 ident;
-	enum saa7127_input_type input_type;
-	enum saa7127_output_type output_type;
-	int video_enable;
-	int wss_enable;
-	u16 wss_mode;
-	int cc_enable;
-	u16 cc_data;
-	int xds_enable;
-	u16 xds_data;
-	int vps_enable;
-	u8 vps_data[5];
-	u8 reg_2d;
-	u8 reg_3a;
-	u8 reg_3a_cb;   /* colorbar bit */
-	u8 reg_61;
-};
-
-static inline struct saa7127_state *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct saa7127_state, sd);
-}
-
-static const char * const output_strs[] =
-{
-	"S-Video + Composite",
-	"Composite",
-	"S-Video",
-	"RGB",
-	"YUV C",
-	"YUV V"
-};
-
-static const char * const wss_strs[] = {
-	"invalid",
-	"letterbox 14:9 center",
-	"letterbox 14:9 top",
-	"invalid",
-	"letterbox 16:9 top",
-	"invalid",
-	"invalid",
-	"16:9 full format anamorphic",
-	"4:3 full format",
-	"invalid",
-	"invalid",
-	"letterbox 16:9 center",
-	"invalid",
-	"letterbox >16:9 center",
-	"14:9 full format center",
-	"invalid",
-};
-
-/* ----------------------------------------------------------------------- */
-
-static int saa7127_read(struct v4l2_subdev *sd, u8 reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return i2c_smbus_read_byte_data(client, reg);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int saa7127_write(struct v4l2_subdev *sd, u8 reg, u8 val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	int i;
-
-	for (i = 0; i < 3; i++) {
-		if (i2c_smbus_write_byte_data(client, reg, val) == 0)
-			return 0;
-	}
-	v4l2_err(sd, "I2C Write Problem\n");
-	return -1;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int saa7127_write_inittab(struct v4l2_subdev *sd,
-				 const struct i2c_reg_value *regs)
-{
-	while (regs->reg != 0) {
-		saa7127_write(sd, regs->reg, regs->value);
-		regs++;
-	}
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int saa7127_set_vps(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
-{
-	struct saa7127_state *state = to_state(sd);
-	int enable = (data->line != 0);
-
-	if (enable && (data->field != 0 || data->line != 16))
-		return -EINVAL;
-	if (state->vps_enable != enable) {
-		v4l2_dbg(1, debug, sd, "Turn VPS Signal %s\n", enable ? "on" : "off");
-		saa7127_write(sd, 0x54, enable << 7);
-		state->vps_enable = enable;
-	}
-	if (!enable)
-		return 0;
-
-	state->vps_data[0] = data->data[2];
-	state->vps_data[1] = data->data[8];
-	state->vps_data[2] = data->data[9];
-	state->vps_data[3] = data->data[10];
-	state->vps_data[4] = data->data[11];
-	v4l2_dbg(1, debug, sd, "Set VPS data %*ph\n", 5, state->vps_data);
-	saa7127_write(sd, 0x55, state->vps_data[0]);
-	saa7127_write(sd, 0x56, state->vps_data[1]);
-	saa7127_write(sd, 0x57, state->vps_data[2]);
-	saa7127_write(sd, 0x58, state->vps_data[3]);
-	saa7127_write(sd, 0x59, state->vps_data[4]);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int saa7127_set_cc(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
-{
-	struct saa7127_state *state = to_state(sd);
-	u16 cc = data->data[1] << 8 | data->data[0];
-	int enable = (data->line != 0);
-
-	if (enable && (data->field != 0 || data->line != 21))
-		return -EINVAL;
-	if (state->cc_enable != enable) {
-		v4l2_dbg(1, debug, sd,
-			"Turn CC %s\n", enable ? "on" : "off");
-		saa7127_write(sd, SAA7127_REG_CLOSED_CAPTION,
-			(state->xds_enable << 7) | (enable << 6) | 0x11);
-		state->cc_enable = enable;
-	}
-	if (!enable)
-		return 0;
-
-	v4l2_dbg(2, debug, sd, "CC data: %04x\n", cc);
-	saa7127_write(sd, SAA7127_REG_LINE_21_ODD_0, cc & 0xff);
-	saa7127_write(sd, SAA7127_REG_LINE_21_ODD_1, cc >> 8);
-	state->cc_data = cc;
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int saa7127_set_xds(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
-{
-	struct saa7127_state *state = to_state(sd);
-	u16 xds = data->data[1] << 8 | data->data[0];
-	int enable = (data->line != 0);
-
-	if (enable && (data->field != 1 || data->line != 21))
-		return -EINVAL;
-	if (state->xds_enable != enable) {
-		v4l2_dbg(1, debug, sd, "Turn XDS %s\n", enable ? "on" : "off");
-		saa7127_write(sd, SAA7127_REG_CLOSED_CAPTION,
-				(enable << 7) | (state->cc_enable << 6) | 0x11);
-		state->xds_enable = enable;
-	}
-	if (!enable)
-		return 0;
-
-	v4l2_dbg(2, debug, sd, "XDS data: %04x\n", xds);
-	saa7127_write(sd, SAA7127_REG_LINE_21_EVEN_0, xds & 0xff);
-	saa7127_write(sd, SAA7127_REG_LINE_21_EVEN_1, xds >> 8);
-	state->xds_data = xds;
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int saa7127_set_wss(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
-{
-	struct saa7127_state *state = to_state(sd);
-	int enable = (data->line != 0);
-
-	if (enable && (data->field != 0 || data->line != 23))
-		return -EINVAL;
-	if (state->wss_enable != enable) {
-		v4l2_dbg(1, debug, sd, "Turn WSS %s\n", enable ? "on" : "off");
-		saa7127_write(sd, 0x27, enable << 7);
-		state->wss_enable = enable;
-	}
-	if (!enable)
-		return 0;
-
-	saa7127_write(sd, 0x26, data->data[0]);
-	saa7127_write(sd, 0x27, 0x80 | (data->data[1] & 0x3f));
-	v4l2_dbg(1, debug, sd,
-		"WSS mode: %s\n", wss_strs[data->data[0] & 0xf]);
-	state->wss_mode = (data->data[1] & 0x3f) << 8 | data->data[0];
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int saa7127_set_video_enable(struct v4l2_subdev *sd, int enable)
-{
-	struct saa7127_state *state = to_state(sd);
-
-	if (enable) {
-		v4l2_dbg(1, debug, sd, "Enable Video Output\n");
-		saa7127_write(sd, 0x2d, state->reg_2d);
-		saa7127_write(sd, 0x61, state->reg_61);
-	} else {
-		v4l2_dbg(1, debug, sd, "Disable Video Output\n");
-		saa7127_write(sd, 0x2d, (state->reg_2d & 0xf0));
-		saa7127_write(sd, 0x61, (state->reg_61 | 0xc0));
-	}
-	state->video_enable = enable;
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int saa7127_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct saa7127_state *state = to_state(sd);
-	const struct i2c_reg_value *inittab;
-
-	if (std & V4L2_STD_525_60) {
-		v4l2_dbg(1, debug, sd, "Selecting 60 Hz video Standard\n");
-		inittab = saa7127_init_config_60hz;
-		state->reg_61 = SAA7127_60HZ_DAC_CONTROL;
-
-	} else if (state->ident == V4L2_IDENT_SAA7129 &&
-		   (std & V4L2_STD_SECAM) &&
-		   !(std & (V4L2_STD_625_50 & ~V4L2_STD_SECAM))) {
-
-		/* If and only if SECAM, with a SAA712[89] */
-		v4l2_dbg(1, debug, sd,
-			 "Selecting 50 Hz SECAM video Standard\n");
-		inittab = saa7127_init_config_50hz_secam;
-		state->reg_61 = SAA7127_50HZ_SECAM_DAC_CONTROL;
-
-	} else {
-		v4l2_dbg(1, debug, sd, "Selecting 50 Hz PAL video Standard\n");
-		inittab = saa7127_init_config_50hz_pal;
-		state->reg_61 = SAA7127_50HZ_PAL_DAC_CONTROL;
-	}
-
-	/* Write Table */
-	saa7127_write_inittab(sd, inittab);
-	state->std = std;
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int saa7127_set_output_type(struct v4l2_subdev *sd, int output)
-{
-	struct saa7127_state *state = to_state(sd);
-
-	switch (output) {
-	case SAA7127_OUTPUT_TYPE_RGB:
-		state->reg_2d = 0x0f;	/* RGB + CVBS (for sync) */
-		state->reg_3a = 0x13;	/* by default switch YUV to RGB-matrix on */
-		break;
-
-	case SAA7127_OUTPUT_TYPE_COMPOSITE:
-		if (state->ident == V4L2_IDENT_SAA7129)
-			state->reg_2d = 0x20;	/* CVBS only */
-		else
-			state->reg_2d = 0x08;	/* 00001000 CVBS only, RGB DAC's off (high impedance mode) */
-		state->reg_3a = 0x13;	/* by default switch YUV to RGB-matrix on */
-		break;
-
-	case SAA7127_OUTPUT_TYPE_SVIDEO:
-		if (state->ident == V4L2_IDENT_SAA7129)
-			state->reg_2d = 0x18;	/* Y + C */
-		else
-			state->reg_2d = 0xff;   /*11111111  croma -> R, luma -> CVBS + G + B */
-		state->reg_3a = 0x13;	/* by default switch YUV to RGB-matrix on */
-		break;
-
-	case SAA7127_OUTPUT_TYPE_YUV_V:
-		state->reg_2d = 0x4f;	/* reg 2D = 01001111, all DAC's on, RGB + VBS */
-		state->reg_3a = 0x0b;	/* reg 3A = 00001011, bypass RGB-matrix */
-		break;
-
-	case SAA7127_OUTPUT_TYPE_YUV_C:
-		state->reg_2d = 0x0f;	/* reg 2D = 00001111, all DAC's on, RGB + CVBS */
-		state->reg_3a = 0x0b;	/* reg 3A = 00001011, bypass RGB-matrix */
-		break;
-
-	case SAA7127_OUTPUT_TYPE_BOTH:
-		if (state->ident == V4L2_IDENT_SAA7129)
-			state->reg_2d = 0x38;
-		else
-			state->reg_2d = 0xbf;
-		state->reg_3a = 0x13;	/* by default switch YUV to RGB-matrix on */
-		break;
-
-	default:
-		return -EINVAL;
-	}
-	v4l2_dbg(1, debug, sd,
-		"Selecting %s output type\n", output_strs[output]);
-
-	/* Configure Encoder */
-	saa7127_write(sd, 0x2d, state->reg_2d);
-	saa7127_write(sd, 0x3a, state->reg_3a | state->reg_3a_cb);
-	state->output_type = output;
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int saa7127_set_input_type(struct v4l2_subdev *sd, int input)
-{
-	struct saa7127_state *state = to_state(sd);
-
-	switch (input) {
-	case SAA7127_INPUT_TYPE_NORMAL:	/* avia */
-		v4l2_dbg(1, debug, sd, "Selecting Normal Encoder Input\n");
-		state->reg_3a_cb = 0;
-		break;
-
-	case SAA7127_INPUT_TYPE_TEST_IMAGE:	/* color bar */
-		v4l2_dbg(1, debug, sd, "Selecting Color Bar generator\n");
-		state->reg_3a_cb = 0x80;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-	saa7127_write(sd, 0x3a, state->reg_3a | state->reg_3a_cb);
-	state->input_type = input;
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int saa7127_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct saa7127_state *state = to_state(sd);
-
-	if (state->std == std)
-		return 0;
-	return saa7127_set_std(sd, std);
-}
-
-static int saa7127_s_routing(struct v4l2_subdev *sd,
-			     u32 input, u32 output, u32 config)
-{
-	struct saa7127_state *state = to_state(sd);
-	int rc = 0;
-
-	if (state->input_type != input)
-		rc = saa7127_set_input_type(sd, input);
-	if (rc == 0 && state->output_type != output)
-		rc = saa7127_set_output_type(sd, output);
-	return rc;
-}
-
-static int saa7127_s_stream(struct v4l2_subdev *sd, int enable)
-{
-	struct saa7127_state *state = to_state(sd);
-
-	if (state->video_enable == enable)
-		return 0;
-	return saa7127_set_video_enable(sd, enable);
-}
-
-static int saa7127_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt)
-{
-	struct saa7127_state *state = to_state(sd);
-
-	memset(fmt, 0, sizeof(*fmt));
-	if (state->vps_enable)
-		fmt->service_lines[0][16] = V4L2_SLICED_VPS;
-	if (state->wss_enable)
-		fmt->service_lines[0][23] = V4L2_SLICED_WSS_625;
-	if (state->cc_enable) {
-		fmt->service_lines[0][21] = V4L2_SLICED_CAPTION_525;
-		fmt->service_lines[1][21] = V4L2_SLICED_CAPTION_525;
-	}
-	fmt->service_set =
-		(state->vps_enable ? V4L2_SLICED_VPS : 0) |
-		(state->wss_enable ? V4L2_SLICED_WSS_625 : 0) |
-		(state->cc_enable ? V4L2_SLICED_CAPTION_525 : 0);
-	return 0;
-}
-
-static int saa7127_s_vbi_data(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
-{
-	switch (data->id) {
-	case V4L2_SLICED_WSS_625:
-		return saa7127_set_wss(sd, data);
-	case V4L2_SLICED_VPS:
-		return saa7127_set_vps(sd, data);
-	case V4L2_SLICED_CAPTION_525:
-		if (data->field == 0)
-			return saa7127_set_cc(sd, data);
-		return saa7127_set_xds(sd, data);
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int saa7127_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	reg->val = saa7127_read(sd, reg->reg & 0xff);
-	reg->size = 1;
-	return 0;
-}
-
-static int saa7127_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	saa7127_write(sd, reg->reg & 0xff, reg->val & 0xff);
-	return 0;
-}
-#endif
-
-static int saa7127_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct saa7127_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, state->ident, 0);
-}
-
-static int saa7127_log_status(struct v4l2_subdev *sd)
-{
-	struct saa7127_state *state = to_state(sd);
-
-	v4l2_info(sd, "Standard: %s\n", (state->std & V4L2_STD_525_60) ? "60 Hz" : "50 Hz");
-	v4l2_info(sd, "Input:    %s\n", state->input_type ?  "color bars" : "normal");
-	v4l2_info(sd, "Output:   %s\n", state->video_enable ?
-			output_strs[state->output_type] : "disabled");
-	v4l2_info(sd, "WSS:      %s\n", state->wss_enable ?
-			wss_strs[state->wss_mode] : "disabled");
-	v4l2_info(sd, "VPS:      %s\n", state->vps_enable ? "enabled" : "disabled");
-	v4l2_info(sd, "CC:       %s\n", state->cc_enable ? "enabled" : "disabled");
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops saa7127_core_ops = {
-	.log_status = saa7127_log_status,
-	.g_chip_ident = saa7127_g_chip_ident,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.g_register = saa7127_g_register,
-	.s_register = saa7127_s_register,
-#endif
-};
-
-static const struct v4l2_subdev_video_ops saa7127_video_ops = {
-	.s_std_output = saa7127_s_std_output,
-	.s_routing = saa7127_s_routing,
-	.s_stream = saa7127_s_stream,
-};
-
-static const struct v4l2_subdev_vbi_ops saa7127_vbi_ops = {
-	.s_vbi_data = saa7127_s_vbi_data,
-	.g_sliced_fmt = saa7127_g_sliced_fmt,
-};
-
-static const struct v4l2_subdev_ops saa7127_ops = {
-	.core = &saa7127_core_ops,
-	.video = &saa7127_video_ops,
-	.vbi = &saa7127_vbi_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static int saa7127_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
-{
-	struct saa7127_state *state;
-	struct v4l2_subdev *sd;
-	struct v4l2_sliced_vbi_data vbi = { 0, 0, 0, 0 };  /* set to disabled */
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -EIO;
-
-	v4l_dbg(1, debug, client, "detecting saa7127 client on address 0x%x\n",
-			client->addr << 1);
-
-	state = kzalloc(sizeof(struct saa7127_state), GFP_KERNEL);
-	if (state == NULL)
-		return -ENOMEM;
-
-	sd = &state->sd;
-	v4l2_i2c_subdev_init(sd, client, &saa7127_ops);
-
-	/* First test register 0: Bits 5-7 are a version ID (should be 0),
-	   and bit 2 should also be 0.
-	   This is rather general, so the second test is more specific and
-	   looks at the 'ending point of burst in clock cycles' which is
-	   0x1d after a reset and not expected to ever change. */
-	if ((saa7127_read(sd, 0) & 0xe4) != 0 ||
-			(saa7127_read(sd, 0x29) & 0x3f) != 0x1d) {
-		v4l2_dbg(1, debug, sd, "saa7127 not found\n");
-		kfree(state);
-		return -ENODEV;
-	}
-
-	if (id->driver_data) {	/* Chip type is already known */
-		state->ident = id->driver_data;
-	} else {		/* Needs detection */
-		int read_result;
-
-		/* Detect if it's an saa7129 */
-		read_result = saa7127_read(sd, SAA7129_REG_FADE_KEY_COL2);
-		saa7127_write(sd, SAA7129_REG_FADE_KEY_COL2, 0xaa);
-		if (saa7127_read(sd, SAA7129_REG_FADE_KEY_COL2) == 0xaa) {
-			saa7127_write(sd, SAA7129_REG_FADE_KEY_COL2,
-					read_result);
-			state->ident = V4L2_IDENT_SAA7129;
-			strlcpy(client->name, "saa7129", I2C_NAME_SIZE);
-		} else {
-			state->ident = V4L2_IDENT_SAA7127;
-			strlcpy(client->name, "saa7127", I2C_NAME_SIZE);
-		}
-	}
-
-	v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
-			client->addr << 1, client->adapter->name);
-
-	v4l2_dbg(1, debug, sd, "Configuring encoder\n");
-	saa7127_write_inittab(sd, saa7127_init_config_common);
-	saa7127_set_std(sd, V4L2_STD_NTSC);
-	saa7127_set_output_type(sd, SAA7127_OUTPUT_TYPE_BOTH);
-	saa7127_set_vps(sd, &vbi);
-	saa7127_set_wss(sd, &vbi);
-	saa7127_set_cc(sd, &vbi);
-	saa7127_set_xds(sd, &vbi);
-	if (test_image == 1)
-		/* The Encoder has an internal Colorbar generator */
-		/* This can be used for debugging */
-		saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_TEST_IMAGE);
-	else
-		saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_NORMAL);
-	saa7127_set_video_enable(sd, 1);
-
-	if (state->ident == V4L2_IDENT_SAA7129)
-		saa7127_write_inittab(sd, saa7129_init_config_extra);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static int saa7127_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-
-	v4l2_device_unregister_subdev(sd);
-	/* Turn off TV output */
-	saa7127_set_video_enable(sd, 0);
-	kfree(to_state(sd));
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static struct i2c_device_id saa7127_id[] = {
-	{ "saa7127_auto", 0 },	/* auto-detection */
-	{ "saa7126", V4L2_IDENT_SAA7127 },
-	{ "saa7127", V4L2_IDENT_SAA7127 },
-	{ "saa7128", V4L2_IDENT_SAA7129 },
-	{ "saa7129", V4L2_IDENT_SAA7129 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, saa7127_id);
-
-static struct i2c_driver saa7127_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "saa7127",
-	},
-	.probe		= saa7127_probe,
-	.remove		= saa7127_remove,
-	.id_table	= saa7127_id,
-};
-
-module_i2c_driver(saa7127_driver);
diff --git a/drivers/media/video/saa717x.c b/drivers/media/video/saa717x.c
deleted file mode 100644
index 1e84466..0000000
--- a/drivers/media/video/saa717x.c
+++ /dev/null
@@ -1,1378 +0,0 @@
-/*
- * saa717x - Philips SAA717xHL video decoder driver
- *
- * Based on the saa7115 driver
- *
- * Changes by Ohta Kyuma <alpha292@bremen.or.jp>
- *    - Apply to SAA717x,NEC uPD64031,uPD64083. (1/31/2004)
- *
- * Changes by T.Adachi (tadachi@tadachi-net.com)
- *    - support audio, video scaler etc, and checked the initialize sequence.
- *
- * Cleaned up by Hans Verkuil <hverkuil@xs4all.nl>
- *
- * Note: this is a reversed engineered driver based on captures from
- * the I2C bus under Windows. This chip is very similar to the saa7134,
- * though. Unfortunately, this driver is currently only working for NTSC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/sched.h>
-
-#include <linux/videodev2.h>
-#include <linux/i2c.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ctrls.h>
-
-MODULE_DESCRIPTION("Philips SAA717x audio/video decoder driver");
-MODULE_AUTHOR("K. Ohta, T. Adachi, Hans Verkuil");
-MODULE_LICENSE("GPL");
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
-
-/*
- * Generic i2c probe
- * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
- */
-
-struct saa717x_state {
-	struct v4l2_subdev sd;
-	struct v4l2_ctrl_handler hdl;
-	v4l2_std_id std;
-	int input;
-	int enable;
-	int radio;
-	int playback;
-	int audio;
-	int tuner_audio_mode;
-	int audio_main_mute;
-	int audio_main_vol_r;
-	int audio_main_vol_l;
-	u16 audio_main_bass;
-	u16 audio_main_treble;
-	u16 audio_main_volume;
-	u16 audio_main_balance;
-	int audio_input;
-};
-
-static inline struct saa717x_state *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct saa717x_state, sd);
-}
-
-static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
-{
-	return &container_of(ctrl->handler, struct saa717x_state, hdl)->sd;
-}
-
-/* ----------------------------------------------------------------------- */
-
-/* for audio mode */
-#define TUNER_AUDIO_MONO   	0  /* LL */
-#define TUNER_AUDIO_STEREO 	1  /* LR */
-#define TUNER_AUDIO_LANG1  	2  /* LL */
-#define TUNER_AUDIO_LANG2  	3  /* RR */
-
-#define SAA717X_NTSC_WIDTH   	(704)
-#define SAA717X_NTSC_HEIGHT  	(480)
-
-/* ----------------------------------------------------------------------- */
-
-static int saa717x_write(struct v4l2_subdev *sd, u32 reg, u32 value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct i2c_adapter *adap = client->adapter;
-	int fw_addr = reg == 0x454 || (reg >= 0x464 && reg <= 0x478) || reg == 0x480 || reg == 0x488;
-	unsigned char mm1[6];
-	struct i2c_msg msg;
-
-	msg.flags = 0;
-	msg.addr = client->addr;
-	mm1[0] = (reg >> 8) & 0xff;
-	mm1[1] = reg & 0xff;
-
-	if (fw_addr) {
-		mm1[4] = (value >> 16) & 0xff;
-		mm1[3] = (value >> 8) & 0xff;
-		mm1[2] = value & 0xff;
-	} else {
-		mm1[2] = value & 0xff;
-	}
-	msg.len = fw_addr ? 5 : 3; /* Long Registers have *only* three bytes! */
-	msg.buf = mm1;
-	v4l2_dbg(2, debug, sd, "wrote:  reg 0x%03x=%08x\n", reg, value);
-	return i2c_transfer(adap, &msg, 1) == 1;
-}
-
-static void saa717x_write_regs(struct v4l2_subdev *sd, u32 *data)
-{
-	while (data[0] || data[1]) {
-		saa717x_write(sd, data[0], data[1]);
-		data += 2;
-	}
-}
-
-static u32 saa717x_read(struct v4l2_subdev *sd, u32 reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct i2c_adapter *adap = client->adapter;
-	int fw_addr = (reg >= 0x404 && reg <= 0x4b8) || reg == 0x528;
-	unsigned char mm1[2];
-	unsigned char mm2[4] = { 0, 0, 0, 0 };
-	struct i2c_msg msgs[2];
-	u32 value;
-
-	msgs[0].flags = 0;
-	msgs[1].flags = I2C_M_RD;
-	msgs[0].addr = msgs[1].addr = client->addr;
-	mm1[0] = (reg >> 8) & 0xff;
-	mm1[1] = reg & 0xff;
-	msgs[0].len = 2;
-	msgs[0].buf = mm1;
-	msgs[1].len = fw_addr ? 3 : 1; /* Multibyte Registers contains *only* 3 bytes */
-	msgs[1].buf = mm2;
-	i2c_transfer(adap, msgs, 2);
-
-	if (fw_addr)
-		value = (mm2[2] & 0xff)  | ((mm2[1] & 0xff) >> 8) | ((mm2[0] & 0xff) >> 16);
-	else
-		value = mm2[0] & 0xff;
-
-	v4l2_dbg(2, debug, sd, "read:  reg 0x%03x=0x%08x\n", reg, value);
-	return value;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static u32 reg_init_initialize[] =
-{
-	/* from linux driver */
-	0x101, 0x008, /* Increment delay */
-
-	0x103, 0x000, /* Analog input control 2 */
-	0x104, 0x090, /* Analog input control 3 */
-	0x105, 0x090, /* Analog input control 4 */
-	0x106, 0x0eb, /* Horizontal sync start */
-	0x107, 0x0e0, /* Horizontal sync stop */
-	0x109, 0x055, /* Luminance control */
-
-	0x10f, 0x02a, /* Chroma gain control */
-	0x110, 0x000, /* Chroma control 2 */
-
-	0x114, 0x045, /* analog/ADC */
-
-	0x118, 0x040, /* RAW data gain */
-	0x119, 0x080, /* RAW data offset */
-
-	0x044, 0x000, /* VBI horizontal input window start (L) TASK A */
-	0x045, 0x000, /* VBI horizontal input window start (H) TASK A */
-	0x046, 0x0cf, /* VBI horizontal input window stop (L) TASK A */
-	0x047, 0x002, /* VBI horizontal input window stop (H) TASK A */
-
-	0x049, 0x000, /* VBI vertical input window start (H) TASK A */
-
-	0x04c, 0x0d0, /* VBI horizontal output length (L) TASK A */
-	0x04d, 0x002, /* VBI horizontal output length (H) TASK A */
-
-	0x064, 0x080, /* Lumina brightness TASK A */
-	0x065, 0x040, /* Luminance contrast TASK A */
-	0x066, 0x040, /* Chroma saturation TASK A */
-	/* 067H: Reserved */
-	0x068, 0x000, /* VBI horizontal scaling increment (L) TASK A */
-	0x069, 0x004, /* VBI horizontal scaling increment (H) TASK A */
-	0x06a, 0x000, /* VBI phase offset TASK A */
-
-	0x06e, 0x000, /* Horizontal phase offset Luma TASK A */
-	0x06f, 0x000, /* Horizontal phase offset Chroma TASK A */
-
-	0x072, 0x000, /* Vertical filter mode TASK A */
-
-	0x084, 0x000, /* VBI horizontal input window start (L) TAKS B */
-	0x085, 0x000, /* VBI horizontal input window start (H) TAKS B */
-	0x086, 0x0cf, /* VBI horizontal input window stop (L) TAKS B */
-	0x087, 0x002, /* VBI horizontal input window stop (H) TAKS B */
-
-	0x089, 0x000, /* VBI vertical input window start (H) TAKS B */
-
-	0x08c, 0x0d0, /* VBI horizontal output length (L) TASK B */
-	0x08d, 0x002, /* VBI horizontal output length (H) TASK B */
-
-	0x0a4, 0x080, /* Lumina brightness TASK B */
-	0x0a5, 0x040, /* Luminance contrast TASK B */
-	0x0a6, 0x040, /* Chroma saturation TASK B */
-	/* 0A7H reserved */
-	0x0a8, 0x000, /* VBI horizontal scaling increment (L) TASK B */
-	0x0a9, 0x004, /* VBI horizontal scaling increment (H) TASK B */
-	0x0aa, 0x000, /* VBI phase offset TASK B */
-
-	0x0ae, 0x000, /* Horizontal phase offset Luma TASK B */
-	0x0af, 0x000, /*Horizontal phase offset Chroma TASK B */
-
-	0x0b2, 0x000, /* Vertical filter mode TASK B */
-
-	0x00c, 0x000, /* Start point GREEN path */
-	0x00d, 0x000, /* Start point BLUE path */
-	0x00e, 0x000, /* Start point RED path */
-
-	0x010, 0x010, /* GREEN path gamma curve --- */
-	0x011, 0x020,
-	0x012, 0x030,
-	0x013, 0x040,
-	0x014, 0x050,
-	0x015, 0x060,
-	0x016, 0x070,
-	0x017, 0x080,
-	0x018, 0x090,
-	0x019, 0x0a0,
-	0x01a, 0x0b0,
-	0x01b, 0x0c0,
-	0x01c, 0x0d0,
-	0x01d, 0x0e0,
-	0x01e, 0x0f0,
-	0x01f, 0x0ff, /* --- GREEN path gamma curve */
-
-	0x020, 0x010, /* BLUE path gamma curve --- */
-	0x021, 0x020,
-	0x022, 0x030,
-	0x023, 0x040,
-	0x024, 0x050,
-	0x025, 0x060,
-	0x026, 0x070,
-	0x027, 0x080,
-	0x028, 0x090,
-	0x029, 0x0a0,
-	0x02a, 0x0b0,
-	0x02b, 0x0c0,
-	0x02c, 0x0d0,
-	0x02d, 0x0e0,
-	0x02e, 0x0f0,
-	0x02f, 0x0ff, /* --- BLUE path gamma curve */
-
-	0x030, 0x010, /* RED path gamma curve --- */
-	0x031, 0x020,
-	0x032, 0x030,
-	0x033, 0x040,
-	0x034, 0x050,
-	0x035, 0x060,
-	0x036, 0x070,
-	0x037, 0x080,
-	0x038, 0x090,
-	0x039, 0x0a0,
-	0x03a, 0x0b0,
-	0x03b, 0x0c0,
-	0x03c, 0x0d0,
-	0x03d, 0x0e0,
-	0x03e, 0x0f0,
-	0x03f, 0x0ff, /* --- RED path gamma curve */
-
-	0x109, 0x085, /* Luminance control  */
-
-	/**** from app start ****/
-	0x584, 0x000, /* AGC gain control */
-	0x585, 0x000, /* Program count */
-	0x586, 0x003, /* Status reset */
-	0x588, 0x0ff, /* Number of audio samples (L) */
-	0x589, 0x00f, /* Number of audio samples (M) */
-	0x58a, 0x000, /* Number of audio samples (H) */
-	0x58b, 0x000, /* Audio select */
-	0x58c, 0x010, /* Audio channel assign1 */
-	0x58d, 0x032, /* Audio channel assign2 */
-	0x58e, 0x054, /* Audio channel assign3 */
-	0x58f, 0x023, /* Audio format */
-	0x590, 0x000, /* SIF control */
-
-	0x595, 0x000, /* ?? */
-	0x596, 0x000, /* ?? */
-	0x597, 0x000, /* ?? */
-
-	0x464, 0x00, /* Digital input crossbar1 */
-
-	0x46c, 0xbbbb10, /* Digital output selection1-3 */
-	0x470, 0x101010, /* Digital output selection4-6 */
-
-	0x478, 0x00, /* Sound feature control */
-
-	0x474, 0x18, /* Softmute control */
-
-	0x454, 0x0425b9, /* Sound Easy programming(reset) */
-	0x454, 0x042539, /* Sound Easy programming(reset) */
-
-
-	/**** common setting( of DVD play, including scaler commands) ****/
-	0x042, 0x003, /* Data path configuration for VBI (TASK A) */
-
-	0x082, 0x003, /* Data path configuration for VBI (TASK B) */
-
-	0x108, 0x0f8, /* Sync control */
-	0x2a9, 0x0fd, /* ??? */
-	0x102, 0x089, /* select video input "mode 9" */
-	0x111, 0x000, /* Mode/delay control */
-
-	0x10e, 0x00a, /* Chroma control 1 */
-
-	0x594, 0x002, /* SIF, analog I/O select */
-
-	0x454, 0x0425b9, /* Sound  */
-	0x454, 0x042539,
-
-	0x111, 0x000,
-	0x10e, 0x00a,
-	0x464, 0x000,
-	0x300, 0x000,
-	0x301, 0x006,
-	0x302, 0x000,
-	0x303, 0x006,
-	0x308, 0x040,
-	0x309, 0x000,
-	0x30a, 0x000,
-	0x30b, 0x000,
-	0x000, 0x002,
-	0x001, 0x000,
-	0x002, 0x000,
-	0x003, 0x000,
-	0x004, 0x033,
-	0x040, 0x01d,
-	0x041, 0x001,
-	0x042, 0x004,
-	0x043, 0x000,
-	0x080, 0x01e,
-	0x081, 0x001,
-	0x082, 0x004,
-	0x083, 0x000,
-	0x190, 0x018,
-	0x115, 0x000,
-	0x116, 0x012,
-	0x117, 0x018,
-	0x04a, 0x011,
-	0x08a, 0x011,
-	0x04b, 0x000,
-	0x08b, 0x000,
-	0x048, 0x000,
-	0x088, 0x000,
-	0x04e, 0x012,
-	0x08e, 0x012,
-	0x058, 0x012,
-	0x098, 0x012,
-	0x059, 0x000,
-	0x099, 0x000,
-	0x05a, 0x003,
-	0x09a, 0x003,
-	0x05b, 0x001,
-	0x09b, 0x001,
-	0x054, 0x008,
-	0x094, 0x008,
-	0x055, 0x000,
-	0x095, 0x000,
-	0x056, 0x0c7,
-	0x096, 0x0c7,
-	0x057, 0x002,
-	0x097, 0x002,
-	0x0ff, 0x0ff,
-	0x060, 0x001,
-	0x0a0, 0x001,
-	0x061, 0x000,
-	0x0a1, 0x000,
-	0x062, 0x000,
-	0x0a2, 0x000,
-	0x063, 0x000,
-	0x0a3, 0x000,
-	0x070, 0x000,
-	0x0b0, 0x000,
-	0x071, 0x004,
-	0x0b1, 0x004,
-	0x06c, 0x0e9,
-	0x0ac, 0x0e9,
-	0x06d, 0x003,
-	0x0ad, 0x003,
-	0x05c, 0x0d0,
-	0x09c, 0x0d0,
-	0x05d, 0x002,
-	0x09d, 0x002,
-	0x05e, 0x0f2,
-	0x09e, 0x0f2,
-	0x05f, 0x000,
-	0x09f, 0x000,
-	0x074, 0x000,
-	0x0b4, 0x000,
-	0x075, 0x000,
-	0x0b5, 0x000,
-	0x076, 0x000,
-	0x0b6, 0x000,
-	0x077, 0x000,
-	0x0b7, 0x000,
-	0x195, 0x008,
-	0x0ff, 0x0ff,
-	0x108, 0x0f8,
-	0x111, 0x000,
-	0x10e, 0x00a,
-	0x2a9, 0x0fd,
-	0x464, 0x001,
-	0x454, 0x042135,
-	0x598, 0x0e7,
-	0x599, 0x07d,
-	0x59a, 0x018,
-	0x59c, 0x066,
-	0x59d, 0x090,
-	0x59e, 0x001,
-	0x584, 0x000,
-	0x585, 0x000,
-	0x586, 0x003,
-	0x588, 0x0ff,
-	0x589, 0x00f,
-	0x58a, 0x000,
-	0x58b, 0x000,
-	0x58c, 0x010,
-	0x58d, 0x032,
-	0x58e, 0x054,
-	0x58f, 0x023,
-	0x590, 0x000,
-	0x595, 0x000,
-	0x596, 0x000,
-	0x597, 0x000,
-	0x464, 0x000,
-	0x46c, 0xbbbb10,
-	0x470, 0x101010,
-
-
-	0x478, 0x000,
-	0x474, 0x018,
-	0x454, 0x042135,
-	0x598, 0x0e7,
-	0x599, 0x07d,
-	0x59a, 0x018,
-	0x59c, 0x066,
-	0x59d, 0x090,
-	0x59e, 0x001,
-	0x584, 0x000,
-	0x585, 0x000,
-	0x586, 0x003,
-	0x588, 0x0ff,
-	0x589, 0x00f,
-	0x58a, 0x000,
-	0x58b, 0x000,
-	0x58c, 0x010,
-	0x58d, 0x032,
-	0x58e, 0x054,
-	0x58f, 0x023,
-	0x590, 0x000,
-	0x595, 0x000,
-	0x596, 0x000,
-	0x597, 0x000,
-	0x464, 0x000,
-	0x46c, 0xbbbb10,
-	0x470, 0x101010,
-
-	0x478, 0x000,
-	0x474, 0x018,
-	0x454, 0x042135,
-	0x598, 0x0e7,
-	0x599, 0x07d,
-	0x59a, 0x018,
-	0x59c, 0x066,
-	0x59d, 0x090,
-	0x59e, 0x001,
-	0x584, 0x000,
-	0x585, 0x000,
-	0x586, 0x003,
-	0x588, 0x0ff,
-	0x589, 0x00f,
-	0x58a, 0x000,
-	0x58b, 0x000,
-	0x58c, 0x010,
-	0x58d, 0x032,
-	0x58e, 0x054,
-	0x58f, 0x023,
-	0x590, 0x000,
-	0x595, 0x000,
-	0x596, 0x000,
-	0x597, 0x000,
-	0x464, 0x000,
-	0x46c, 0xbbbb10,
-	0x470, 0x101010,
-	0x478, 0x000,
-	0x474, 0x018,
-	0x454, 0x042135,
-	0x193, 0x000,
-	0x300, 0x000,
-	0x301, 0x006,
-	0x302, 0x000,
-	0x303, 0x006,
-	0x308, 0x040,
-	0x309, 0x000,
-	0x30a, 0x000,
-	0x30b, 0x000,
-	0x000, 0x002,
-	0x001, 0x000,
-	0x002, 0x000,
-	0x003, 0x000,
-	0x004, 0x033,
-	0x040, 0x01d,
-	0x041, 0x001,
-	0x042, 0x004,
-	0x043, 0x000,
-	0x080, 0x01e,
-	0x081, 0x001,
-	0x082, 0x004,
-	0x083, 0x000,
-	0x190, 0x018,
-	0x115, 0x000,
-	0x116, 0x012,
-	0x117, 0x018,
-	0x04a, 0x011,
-	0x08a, 0x011,
-	0x04b, 0x000,
-	0x08b, 0x000,
-	0x048, 0x000,
-	0x088, 0x000,
-	0x04e, 0x012,
-	0x08e, 0x012,
-	0x058, 0x012,
-	0x098, 0x012,
-	0x059, 0x000,
-	0x099, 0x000,
-	0x05a, 0x003,
-	0x09a, 0x003,
-	0x05b, 0x001,
-	0x09b, 0x001,
-	0x054, 0x008,
-	0x094, 0x008,
-	0x055, 0x000,
-	0x095, 0x000,
-	0x056, 0x0c7,
-	0x096, 0x0c7,
-	0x057, 0x002,
-	0x097, 0x002,
-	0x060, 0x001,
-	0x0a0, 0x001,
-	0x061, 0x000,
-	0x0a1, 0x000,
-	0x062, 0x000,
-	0x0a2, 0x000,
-	0x063, 0x000,
-	0x0a3, 0x000,
-	0x070, 0x000,
-	0x0b0, 0x000,
-	0x071, 0x004,
-	0x0b1, 0x004,
-	0x06c, 0x0e9,
-	0x0ac, 0x0e9,
-	0x06d, 0x003,
-	0x0ad, 0x003,
-	0x05c, 0x0d0,
-	0x09c, 0x0d0,
-	0x05d, 0x002,
-	0x09d, 0x002,
-	0x05e, 0x0f2,
-	0x09e, 0x0f2,
-	0x05f, 0x000,
-	0x09f, 0x000,
-	0x074, 0x000,
-	0x0b4, 0x000,
-	0x075, 0x000,
-	0x0b5, 0x000,
-	0x076, 0x000,
-	0x0b6, 0x000,
-	0x077, 0x000,
-	0x0b7, 0x000,
-	0x195, 0x008,
-	0x598, 0x0e7,
-	0x599, 0x07d,
-	0x59a, 0x018,
-	0x59c, 0x066,
-	0x59d, 0x090,
-	0x59e, 0x001,
-	0x584, 0x000,
-	0x585, 0x000,
-	0x586, 0x003,
-	0x588, 0x0ff,
-	0x589, 0x00f,
-	0x58a, 0x000,
-	0x58b, 0x000,
-	0x58c, 0x010,
-	0x58d, 0x032,
-	0x58e, 0x054,
-	0x58f, 0x023,
-	0x590, 0x000,
-	0x595, 0x000,
-	0x596, 0x000,
-	0x597, 0x000,
-	0x464, 0x000,
-	0x46c, 0xbbbb10,
-	0x470, 0x101010,
-	0x478, 0x000,
-	0x474, 0x018,
-	0x454, 0x042135,
-	0x193, 0x0a6,
-	0x108, 0x0f8,
-	0x042, 0x003,
-	0x082, 0x003,
-	0x454, 0x0425b9,
-	0x454, 0x042539,
-	0x193, 0x000,
-	0x193, 0x0a6,
-	0x464, 0x000,
-
-	0, 0
-};
-
-/* Tuner */
-static u32 reg_init_tuner_input[] = {
-	0x108, 0x0f8, /* Sync control */
-	0x111, 0x000, /* Mode/delay control */
-	0x10e, 0x00a, /* Chroma control 1 */
-	0, 0
-};
-
-/* Composite */
-static u32 reg_init_composite_input[] = {
-	0x108, 0x0e8, /* Sync control */
-	0x111, 0x000, /* Mode/delay control */
-	0x10e, 0x04a, /* Chroma control 1 */
-	0, 0
-};
-
-/* S-Video */
-static u32 reg_init_svideo_input[] = {
-	0x108, 0x0e8, /* Sync control */
-	0x111, 0x000, /* Mode/delay control */
-	0x10e, 0x04a, /* Chroma control 1 */
-	0, 0
-};
-
-static u32 reg_set_audio_template[4][2] =
-{
-	{ /* for MONO
-		tadachi 6/29 DMA audio output select?
-		Register 0x46c
-		7-4: DMA2, 3-0: DMA1 ch. DMA4, DMA3 DMA2, DMA1
-		0: MAIN left,  1: MAIN right
-		2: AUX1 left,  3: AUX1 right
-		4: AUX2 left,  5: AUX2 right
-		6: DPL left,   7: DPL  right
-		8: DPL center, 9: DPL surround
-		A: monitor output, B: digital sense */
-		0xbbbb00,
-
-		/* tadachi 6/29 DAC and I2S output select?
-		   Register 0x470
-		   7-4:DAC right ch. 3-0:DAC left ch.
-		   I2S1 right,left  I2S2 right,left */
-		0x00,
-	},
-	{ /* for STEREO */
-		0xbbbb10, 0x101010,
-	},
-	{ /* for LANG1 */
-		0xbbbb00, 0x00,
-	},
-	{ /* for LANG2/SAP */
-		0xbbbb11, 0x111111,
-	}
-};
-
-
-/* Get detected audio flags (from saa7134 driver) */
-static void get_inf_dev_status(struct v4l2_subdev *sd,
-		int *dual_flag, int *stereo_flag)
-{
-	u32 reg_data3;
-
-	static char *stdres[0x20] = {
-		[0x00] = "no standard detected",
-		[0x01] = "B/G (in progress)",
-		[0x02] = "D/K (in progress)",
-		[0x03] = "M (in progress)",
-
-		[0x04] = "B/G A2",
-		[0x05] = "B/G NICAM",
-		[0x06] = "D/K A2 (1)",
-		[0x07] = "D/K A2 (2)",
-		[0x08] = "D/K A2 (3)",
-		[0x09] = "D/K NICAM",
-		[0x0a] = "L NICAM",
-		[0x0b] = "I NICAM",
-
-		[0x0c] = "M Korea",
-		[0x0d] = "M BTSC ",
-		[0x0e] = "M EIAJ",
-
-		[0x0f] = "FM radio / IF 10.7 / 50 deemp",
-		[0x10] = "FM radio / IF 10.7 / 75 deemp",
-		[0x11] = "FM radio / IF sel / 50 deemp",
-		[0x12] = "FM radio / IF sel / 75 deemp",
-
-		[0x13 ... 0x1e] = "unknown",
-		[0x1f] = "??? [in progress]",
-	};
-
-
-	*dual_flag = *stereo_flag = 0;
-
-	/* (demdec status: 0x528) */
-
-	/* read current status */
-	reg_data3 = saa717x_read(sd, 0x0528);
-
-	v4l2_dbg(1, debug, sd, "tvaudio thread status: 0x%x [%s%s%s]\n",
-		reg_data3, stdres[reg_data3 & 0x1f],
-		(reg_data3 & 0x000020) ? ",stereo" : "",
-		(reg_data3 & 0x000040) ? ",dual"   : "");
-	v4l2_dbg(1, debug, sd, "detailed status: "
-		"%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s#%s\n",
-		(reg_data3 & 0x000080) ? " A2/EIAJ pilot tone "     : "",
-		(reg_data3 & 0x000100) ? " A2/EIAJ dual "           : "",
-		(reg_data3 & 0x000200) ? " A2/EIAJ stereo "         : "",
-		(reg_data3 & 0x000400) ? " A2/EIAJ noise mute "     : "",
-
-		(reg_data3 & 0x000800) ? " BTSC/FM radio pilot "    : "",
-		(reg_data3 & 0x001000) ? " SAP carrier "            : "",
-		(reg_data3 & 0x002000) ? " BTSC stereo noise mute " : "",
-		(reg_data3 & 0x004000) ? " SAP noise mute "         : "",
-		(reg_data3 & 0x008000) ? " VDSP "                   : "",
-
-		(reg_data3 & 0x010000) ? " NICST "                  : "",
-		(reg_data3 & 0x020000) ? " NICDU "                  : "",
-		(reg_data3 & 0x040000) ? " NICAM muted "            : "",
-		(reg_data3 & 0x080000) ? " NICAM reserve sound "    : "",
-
-		(reg_data3 & 0x100000) ? " init done "              : "");
-
-	if (reg_data3 & 0x000220) {
-		v4l2_dbg(1, debug, sd, "ST!!!\n");
-		*stereo_flag = 1;
-	}
-
-	if (reg_data3 & 0x000140) {
-		v4l2_dbg(1, debug, sd, "DUAL!!!\n");
-		*dual_flag = 1;
-	}
-}
-
-/* regs write to set audio mode */
-static void set_audio_mode(struct v4l2_subdev *sd, int audio_mode)
-{
-	v4l2_dbg(1, debug, sd, "writing registers to set audio mode by set %d\n",
-			audio_mode);
-
-	saa717x_write(sd, 0x46c, reg_set_audio_template[audio_mode][0]);
-	saa717x_write(sd, 0x470, reg_set_audio_template[audio_mode][1]);
-}
-
-/* write regs to set audio volume, bass and treble */
-static int set_audio_regs(struct v4l2_subdev *sd,
-		struct saa717x_state *decoder)
-{
-	u8 mute = 0xac; /* -84 dB */
-	u32 val;
-	unsigned int work_l, work_r;
-
-	/* set SIF analog I/O select */
-	saa717x_write(sd, 0x0594, decoder->audio_input);
-	v4l2_dbg(1, debug, sd, "set audio input %d\n",
-			decoder->audio_input);
-
-	/* normalize ( 65535 to 0 -> 24 to -40 (not -84)) */
-	work_l = (min(65536 - decoder->audio_main_balance, 32768) * decoder->audio_main_volume) / 32768;
-	work_r = (min(decoder->audio_main_balance, (u16)32768) * decoder->audio_main_volume) / 32768;
-	decoder->audio_main_vol_l = (long)work_l * (24 - (-40)) / 65535 - 40;
-	decoder->audio_main_vol_r = (long)work_r * (24 - (-40)) / 65535 - 40;
-
-	/* set main volume */
-	/* main volume L[7-0],R[7-0],0x00  24=24dB,-83dB, -84(mute) */
-	/*    def:0dB->6dB(MPG600GR) */
-	/* if mute is on, set mute */
-	if (decoder->audio_main_mute) {
-		val = mute | (mute << 8);
-	} else {
-		val = (u8)decoder->audio_main_vol_l |
-			((u8)decoder->audio_main_vol_r << 8);
-	}
-
-	saa717x_write(sd, 0x480, val);
-
-	/* set bass and treble */
-	val = decoder->audio_main_bass & 0x1f;
-	val |= (decoder->audio_main_treble & 0x1f) << 5;
-	saa717x_write(sd, 0x488, val);
-	return 0;
-}
-
-/********** scaling staff ***********/
-static void set_h_prescale(struct v4l2_subdev *sd,
-		int task, int prescale)
-{
-	static const struct {
-		int xpsc;
-		int xacl;
-		int xc2_1;
-		int xdcg;
-		int vpfy;
-	} vals[] = {
-		/* XPSC XACL XC2_1 XDCG VPFY */
-		{    1,   0,    0,    0,   0 },
-		{    2,   2,    1,    2,   2 },
-		{    3,   4,    1,    3,   2 },
-		{    4,   8,    1,    4,   2 },
-		{    5,   8,    1,    4,   2 },
-		{    6,   8,    1,    4,   3 },
-		{    7,   8,    1,    4,   3 },
-		{    8,  15,    0,    4,   3 },
-		{    9,  15,    0,    4,   3 },
-		{   10,  16,    1,    5,   3 },
-	};
-	static const int count = ARRAY_SIZE(vals);
-	int i, task_shift;
-
-	task_shift = task * 0x40;
-	for (i = 0; i < count; i++)
-		if (vals[i].xpsc == prescale)
-			break;
-	if (i == count)
-		return;
-
-	/* horizonal prescaling */
-	saa717x_write(sd, 0x60 + task_shift, vals[i].xpsc);
-	/* accumulation length */
-	saa717x_write(sd, 0x61 + task_shift, vals[i].xacl);
-	/* level control */
-	saa717x_write(sd, 0x62 + task_shift,
-			(vals[i].xc2_1 << 3) | vals[i].xdcg);
-	/*FIR prefilter control */
-	saa717x_write(sd, 0x63 + task_shift,
-			(vals[i].vpfy << 2) | vals[i].vpfy);
-}
-
-/********** scaling staff ***********/
-static void set_v_scale(struct v4l2_subdev *sd, int task, int yscale)
-{
-	int task_shift;
-
-	task_shift = task * 0x40;
-	/* Vertical scaling ratio (LOW) */
-	saa717x_write(sd, 0x70 + task_shift, yscale & 0xff);
-	/* Vertical scaling ratio (HI) */
-	saa717x_write(sd, 0x71 + task_shift, yscale >> 8);
-}
-
-static int saa717x_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-	struct saa717x_state *state = to_state(sd);
-
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		saa717x_write(sd, 0x10a, ctrl->val);
-		return 0;
-
-	case V4L2_CID_CONTRAST:
-		saa717x_write(sd, 0x10b, ctrl->val);
-		return 0;
-
-	case V4L2_CID_SATURATION:
-		saa717x_write(sd, 0x10c, ctrl->val);
-		return 0;
-
-	case V4L2_CID_HUE:
-		saa717x_write(sd, 0x10d, ctrl->val);
-		return 0;
-
-	case V4L2_CID_AUDIO_MUTE:
-		state->audio_main_mute = ctrl->val;
-		break;
-
-	case V4L2_CID_AUDIO_VOLUME:
-		state->audio_main_volume = ctrl->val;
-		break;
-
-	case V4L2_CID_AUDIO_BALANCE:
-		state->audio_main_balance = ctrl->val;
-		break;
-
-	case V4L2_CID_AUDIO_TREBLE:
-		state->audio_main_treble = ctrl->val;
-		break;
-
-	case V4L2_CID_AUDIO_BASS:
-		state->audio_main_bass = ctrl->val;
-		break;
-
-	default:
-		return 0;
-	}
-	set_audio_regs(sd, state);
-	return 0;
-}
-
-static int saa717x_s_video_routing(struct v4l2_subdev *sd,
-				   u32 input, u32 output, u32 config)
-{
-	struct saa717x_state *decoder = to_state(sd);
-	int is_tuner = input & 0x80;  /* tuner input flag */
-
-	input &= 0x7f;
-
-	v4l2_dbg(1, debug, sd, "decoder set input (%d)\n", input);
-	/* inputs from 0-9 are available*/
-	/* saa717x have mode0-mode9 but mode5 is reserved. */
-	if (input > 9 || input == 5)
-		return -EINVAL;
-
-	if (decoder->input != input) {
-		int input_line = input;
-
-		decoder->input = input_line;
-		v4l2_dbg(1, debug, sd,  "now setting %s input %d\n",
-				input_line >= 6 ? "S-Video" : "Composite",
-				input_line);
-
-		/* select mode */
-		saa717x_write(sd, 0x102,
-				(saa717x_read(sd, 0x102) & 0xf0) |
-				input_line);
-
-		/* bypass chrominance trap for modes 6..9 */
-		saa717x_write(sd, 0x109,
-				(saa717x_read(sd, 0x109) & 0x7f) |
-				(input_line < 6 ? 0x0 : 0x80));
-
-		/* change audio_mode */
-		if (is_tuner) {
-			/* tuner */
-			set_audio_mode(sd, decoder->tuner_audio_mode);
-		} else {
-			/* Force to STEREO mode if Composite or
-			 * S-Video were chosen */
-			set_audio_mode(sd, TUNER_AUDIO_STEREO);
-		}
-		/* change initialize procedure (Composite/S-Video) */
-		if (is_tuner)
-			saa717x_write_regs(sd, reg_init_tuner_input);
-		else if (input_line >= 6)
-			saa717x_write_regs(sd, reg_init_svideo_input);
-		else
-			saa717x_write_regs(sd, reg_init_composite_input);
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int saa717x_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	reg->val = saa717x_read(sd, reg->reg);
-	reg->size = 1;
-	return 0;
-}
-
-static int saa717x_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u16 addr = reg->reg & 0xffff;
-	u8 val = reg->val & 0xff;
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	saa717x_write(sd, addr, val);
-	return 0;
-}
-#endif
-
-static int saa717x_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
-{
-	int prescale, h_scale, v_scale;
-
-	v4l2_dbg(1, debug, sd, "decoder set size\n");
-
-	if (fmt->code != V4L2_MBUS_FMT_FIXED)
-		return -EINVAL;
-
-	/* FIXME need better bounds checking here */
-	if (fmt->width < 1 || fmt->width > 1440)
-		return -EINVAL;
-	if (fmt->height < 1 || fmt->height > 960)
-		return -EINVAL;
-
-	fmt->field = V4L2_FIELD_INTERLACED;
-	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
-
-	/* scaling setting */
-	/* NTSC and interlace only */
-	prescale = SAA717X_NTSC_WIDTH / fmt->width;
-	if (prescale == 0)
-		prescale = 1;
-	h_scale = 1024 * SAA717X_NTSC_WIDTH / prescale / fmt->width;
-	/* interlace */
-	v_scale = 512 * 2 * SAA717X_NTSC_HEIGHT / fmt->height;
-
-	/* Horizontal prescaling etc */
-	set_h_prescale(sd, 0, prescale);
-	set_h_prescale(sd, 1, prescale);
-
-	/* Horizontal scaling increment */
-	/* TASK A */
-	saa717x_write(sd, 0x6C, (u8)(h_scale & 0xFF));
-	saa717x_write(sd, 0x6D, (u8)((h_scale >> 8) & 0xFF));
-	/* TASK B */
-	saa717x_write(sd, 0xAC, (u8)(h_scale & 0xFF));
-	saa717x_write(sd, 0xAD, (u8)((h_scale >> 8) & 0xFF));
-
-	/* Vertical prescaling etc */
-	set_v_scale(sd, 0, v_scale);
-	set_v_scale(sd, 1, v_scale);
-
-	/* set video output size */
-	/* video number of pixels at output */
-	/* TASK A */
-	saa717x_write(sd, 0x5C, (u8)(fmt->width & 0xFF));
-	saa717x_write(sd, 0x5D, (u8)((fmt->width >> 8) & 0xFF));
-	/* TASK B */
-	saa717x_write(sd, 0x9C, (u8)(fmt->width & 0xFF));
-	saa717x_write(sd, 0x9D, (u8)((fmt->width >> 8) & 0xFF));
-
-	/* video number of lines at output */
-	/* TASK A */
-	saa717x_write(sd, 0x5E, (u8)(fmt->height & 0xFF));
-	saa717x_write(sd, 0x5F, (u8)((fmt->height >> 8) & 0xFF));
-	/* TASK B */
-	saa717x_write(sd, 0x9E, (u8)(fmt->height & 0xFF));
-	saa717x_write(sd, 0x9F, (u8)((fmt->height >> 8) & 0xFF));
-	return 0;
-}
-
-static int saa717x_s_radio(struct v4l2_subdev *sd)
-{
-	struct saa717x_state *decoder = to_state(sd);
-
-	decoder->radio = 1;
-	return 0;
-}
-
-static int saa717x_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct saa717x_state *decoder = to_state(sd);
-
-	v4l2_dbg(1, debug, sd, "decoder set norm ");
-	v4l2_dbg(1, debug, sd, "(not yet implementd)\n");
-
-	decoder->radio = 0;
-	decoder->std = std;
-	return 0;
-}
-
-static int saa717x_s_audio_routing(struct v4l2_subdev *sd,
-				   u32 input, u32 output, u32 config)
-{
-	struct saa717x_state *decoder = to_state(sd);
-
-	if (input < 3) { /* FIXME! --tadachi */
-		decoder->audio_input = input;
-		v4l2_dbg(1, debug, sd,
-				"set decoder audio input to %d\n",
-				decoder->audio_input);
-		set_audio_regs(sd, decoder);
-		return 0;
-	}
-	return -ERANGE;
-}
-
-static int saa717x_s_stream(struct v4l2_subdev *sd, int enable)
-{
-	struct saa717x_state *decoder = to_state(sd);
-
-	v4l2_dbg(1, debug, sd, "decoder %s output\n",
-			enable ? "enable" : "disable");
-	decoder->enable = enable;
-	saa717x_write(sd, 0x193, enable ? 0xa6 : 0x26);
-	return 0;
-}
-
-/* change audio mode */
-static int saa717x_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
-{
-	struct saa717x_state *decoder = to_state(sd);
-	int audio_mode;
-	char *mes[4] = {
-		"MONO", "STEREO", "LANG1", "LANG2/SAP"
-	};
-
-	audio_mode = TUNER_AUDIO_STEREO;
-
-	switch (vt->audmode) {
-		case V4L2_TUNER_MODE_MONO:
-			audio_mode = TUNER_AUDIO_MONO;
-			break;
-		case V4L2_TUNER_MODE_STEREO:
-			audio_mode = TUNER_AUDIO_STEREO;
-			break;
-		case V4L2_TUNER_MODE_LANG2:
-			audio_mode = TUNER_AUDIO_LANG2;
-			break;
-		case V4L2_TUNER_MODE_LANG1:
-			audio_mode = TUNER_AUDIO_LANG1;
-			break;
-	}
-
-	v4l2_dbg(1, debug, sd, "change audio mode to %s\n",
-			mes[audio_mode]);
-	decoder->tuner_audio_mode = audio_mode;
-	/* The registers are not changed here. */
-	/* See DECODER_ENABLE_OUTPUT section. */
-	set_audio_mode(sd, decoder->tuner_audio_mode);
-	return 0;
-}
-
-static int saa717x_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
-{
-	struct saa717x_state *decoder = to_state(sd);
-	int dual_f, stereo_f;
-
-	if (decoder->radio)
-		return 0;
-	get_inf_dev_status(sd, &dual_f, &stereo_f);
-
-	v4l2_dbg(1, debug, sd, "DETECT==st:%d dual:%d\n",
-			stereo_f, dual_f);
-
-	/* mono */
-	if ((dual_f == 0) && (stereo_f == 0)) {
-		vt->rxsubchans = V4L2_TUNER_SUB_MONO;
-		v4l2_dbg(1, debug, sd, "DETECT==MONO\n");
-	}
-
-	/* stereo */
-	if (stereo_f == 1) {
-		if (vt->audmode == V4L2_TUNER_MODE_STEREO ||
-				vt->audmode == V4L2_TUNER_MODE_LANG1) {
-			vt->rxsubchans = V4L2_TUNER_SUB_STEREO;
-			v4l2_dbg(1, debug, sd, "DETECT==ST(ST)\n");
-		} else {
-			vt->rxsubchans = V4L2_TUNER_SUB_MONO;
-			v4l2_dbg(1, debug, sd, "DETECT==ST(MONO)\n");
-		}
-	}
-
-	/* dual */
-	if (dual_f == 1) {
-		if (vt->audmode == V4L2_TUNER_MODE_LANG2) {
-			vt->rxsubchans = V4L2_TUNER_SUB_LANG2 | V4L2_TUNER_SUB_MONO;
-			v4l2_dbg(1, debug, sd, "DETECT==DUAL1\n");
-		} else {
-			vt->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_MONO;
-			v4l2_dbg(1, debug, sd, "DETECT==DUAL2\n");
-		}
-	}
-	return 0;
-}
-
-static int saa717x_log_status(struct v4l2_subdev *sd)
-{
-	struct saa717x_state *state = to_state(sd);
-
-	v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_ctrl_ops saa717x_ctrl_ops = {
-	.s_ctrl = saa717x_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops saa717x_core_ops = {
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.g_register = saa717x_g_register,
-	.s_register = saa717x_s_register,
-#endif
-	.s_std = saa717x_s_std,
-	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
-	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
-	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
-	.g_ctrl = v4l2_subdev_g_ctrl,
-	.s_ctrl = v4l2_subdev_s_ctrl,
-	.queryctrl = v4l2_subdev_queryctrl,
-	.querymenu = v4l2_subdev_querymenu,
-	.log_status = saa717x_log_status,
-};
-
-static const struct v4l2_subdev_tuner_ops saa717x_tuner_ops = {
-	.g_tuner = saa717x_g_tuner,
-	.s_tuner = saa717x_s_tuner,
-	.s_radio = saa717x_s_radio,
-};
-
-static const struct v4l2_subdev_video_ops saa717x_video_ops = {
-	.s_routing = saa717x_s_video_routing,
-	.s_mbus_fmt = saa717x_s_mbus_fmt,
-	.s_stream = saa717x_s_stream,
-};
-
-static const struct v4l2_subdev_audio_ops saa717x_audio_ops = {
-	.s_routing = saa717x_s_audio_routing,
-};
-
-static const struct v4l2_subdev_ops saa717x_ops = {
-	.core = &saa717x_core_ops,
-	.tuner = &saa717x_tuner_ops,
-	.audio = &saa717x_audio_ops,
-	.video = &saa717x_video_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-
-/* i2c implementation */
-
-/* ----------------------------------------------------------------------- */
-static int saa717x_probe(struct i2c_client *client,
-			 const struct i2c_device_id *did)
-{
-	struct saa717x_state *decoder;
-	struct v4l2_ctrl_handler *hdl;
-	struct v4l2_subdev *sd;
-	u8 id = 0;
-	char *p = "";
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -EIO;
-
-	decoder = kzalloc(sizeof(struct saa717x_state), GFP_KERNEL);
-	if (decoder == NULL)
-		return -ENOMEM;
-
-	sd = &decoder->sd;
-	v4l2_i2c_subdev_init(sd, client, &saa717x_ops);
-
-	if (saa717x_write(sd, 0x5a4, 0xfe) &&
-			saa717x_write(sd, 0x5a5, 0x0f) &&
-			saa717x_write(sd, 0x5a6, 0x00) &&
-			saa717x_write(sd, 0x5a7, 0x01))
-		id = saa717x_read(sd, 0x5a0);
-	if (id != 0xc2 && id != 0x32 && id != 0xf2 && id != 0x6c) {
-		v4l2_dbg(1, debug, sd, "saa717x not found (id=%02x)\n", id);
-		kfree(decoder);
-		return -ENODEV;
-	}
-	if (id == 0xc2)
-		p = "saa7173";
-	else if (id == 0x32)
-		p = "saa7174A";
-	else if (id == 0x6c)
-		p = "saa7174HL";
-	else
-		p = "saa7171";
-	v4l2_info(sd, "%s found @ 0x%x (%s)\n", p,
-			client->addr << 1, client->adapter->name);
-
-	hdl = &decoder->hdl;
-	v4l2_ctrl_handler_init(hdl, 9);
-	/* add in ascending ID order */
-	v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
-			V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
-	v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
-			V4L2_CID_CONTRAST, 0, 255, 1, 68);
-	v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
-			V4L2_CID_SATURATION, 0, 255, 1, 64);
-	v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
-			V4L2_CID_HUE, -128, 127, 1, 0);
-	v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
-			V4L2_CID_AUDIO_VOLUME, 0, 65535, 65535 / 100, 42000);
-	v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
-			V4L2_CID_AUDIO_BALANCE, 0, 65535, 65535 / 100, 32768);
-	v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
-			V4L2_CID_AUDIO_BASS, -16, 15, 1, 0);
-	v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
-			V4L2_CID_AUDIO_TREBLE, -16, 15, 1, 0);
-	v4l2_ctrl_new_std(hdl, &saa717x_ctrl_ops,
-			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
-	sd->ctrl_handler = hdl;
-	if (hdl->error) {
-		int err = hdl->error;
-
-		v4l2_ctrl_handler_free(hdl);
-		kfree(decoder);
-		return err;
-	}
-
-	decoder->std = V4L2_STD_NTSC;
-	decoder->input = -1;
-	decoder->enable = 1;
-
-	/* FIXME!! */
-	decoder->playback = 0;	/* initially capture mode used */
-	decoder->audio = 1; /* DECODER_AUDIO_48_KHZ */
-
-	decoder->audio_input = 2; /* FIXME!! */
-
-	decoder->tuner_audio_mode = TUNER_AUDIO_STEREO;
-	/* set volume, bass and treble */
-	decoder->audio_main_vol_l = 6;
-	decoder->audio_main_vol_r = 6;
-
-	v4l2_dbg(1, debug, sd, "writing init values\n");
-
-	/* FIXME!! */
-	saa717x_write_regs(sd, reg_init_initialize);
-
-	v4l2_ctrl_handler_setup(hdl);
-
-	set_current_state(TASK_INTERRUPTIBLE);
-	schedule_timeout(2*HZ);
-	return 0;
-}
-
-static int saa717x_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-
-	v4l2_device_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(sd->ctrl_handler);
-	kfree(to_state(sd));
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct i2c_device_id saa717x_id[] = {
-	{ "saa717x", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, saa717x_id);
-
-static struct i2c_driver saa717x_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "saa717x",
-	},
-	.probe		= saa717x_probe,
-	.remove		= saa717x_remove,
-	.id_table	= saa717x_id,
-};
-
-module_i2c_driver(saa717x_driver);
diff --git a/drivers/media/video/saa7185.c b/drivers/media/video/saa7185.c
deleted file mode 100644
index 2c6b65c..0000000
--- a/drivers/media/video/saa7185.c
+++ /dev/null
@@ -1,377 +0,0 @@
-/*
- * saa7185 - Philips SAA7185B video encoder driver version 0.0.3
- *
- * Copyright (C) 1998 Dave Perks <dperks@ibm.net>
- *
- * Slight changes for video timing and attachment output by
- * Wolfgang Scherr <scherr@net4you.net>
- *
- * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net>
- *    - moved over to linux>=2.4.x i2c protocol (1/1/2003)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/ioctl.h>
-#include <asm/uaccess.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-
-MODULE_DESCRIPTION("Philips SAA7185 video encoder driver");
-MODULE_AUTHOR("Dave Perks");
-MODULE_LICENSE("GPL");
-
-static int debug;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
-
-
-/* ----------------------------------------------------------------------- */
-
-struct saa7185 {
-	struct v4l2_subdev sd;
-	unsigned char reg[128];
-
-	v4l2_std_id norm;
-};
-
-static inline struct saa7185 *to_saa7185(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct saa7185, sd);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static inline int saa7185_read(struct v4l2_subdev *sd)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return i2c_smbus_read_byte(client);
-}
-
-static int saa7185_write(struct v4l2_subdev *sd, u8 reg, u8 value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct saa7185 *encoder = to_saa7185(sd);
-
-	v4l2_dbg(1, debug, sd, "%02x set to %02x\n", reg, value);
-	encoder->reg[reg] = value;
-	return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-static int saa7185_write_block(struct v4l2_subdev *sd,
-		const u8 *data, unsigned int len)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct saa7185 *encoder = to_saa7185(sd);
-	int ret = -1;
-	u8 reg;
-
-	/* the adv7175 has an autoincrement function, use it if
-	 * the adapter understands raw I2C */
-	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
-		/* do raw I2C, not smbus compatible */
-		u8 block_data[32];
-		int block_len;
-
-		while (len >= 2) {
-			block_len = 0;
-			block_data[block_len++] = reg = data[0];
-			do {
-				block_data[block_len++] =
-				    encoder->reg[reg++] = data[1];
-				len -= 2;
-				data += 2;
-			} while (len >= 2 && data[0] == reg && block_len < 32);
-			ret = i2c_master_send(client, block_data, block_len);
-			if (ret < 0)
-				break;
-		}
-	} else {
-		/* do some slow I2C emulation kind of thing */
-		while (len >= 2) {
-			reg = *data++;
-			ret = saa7185_write(sd, reg, *data++);
-			if (ret < 0)
-				break;
-			len -= 2;
-		}
-	}
-
-	return ret;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const unsigned char init_common[] = {
-	0x3a, 0x0f,		/* CBENB=0, V656=0, VY2C=1,
-				 * YUV2C=1, MY2C=1, MUV2C=1 */
-
-	0x42, 0x6b,		/* OVLY0=107 */
-	0x43, 0x00,		/* OVLU0=0     white */
-	0x44, 0x00,		/* OVLV0=0   */
-	0x45, 0x22,		/* OVLY1=34  */
-	0x46, 0xac,		/* OVLU1=172   yellow */
-	0x47, 0x0e,		/* OVLV1=14  */
-	0x48, 0x03,		/* OVLY2=3   */
-	0x49, 0x1d,		/* OVLU2=29    cyan */
-	0x4a, 0xac,		/* OVLV2=172 */
-	0x4b, 0xf0,		/* OVLY3=240 */
-	0x4c, 0xc8,		/* OVLU3=200   green */
-	0x4d, 0xb9,		/* OVLV3=185 */
-	0x4e, 0xd4,		/* OVLY4=212 */
-	0x4f, 0x38,		/* OVLU4=56    magenta */
-	0x50, 0x47,		/* OVLV4=71  */
-	0x51, 0xc1,		/* OVLY5=193 */
-	0x52, 0xe3,		/* OVLU5=227   red */
-	0x53, 0x54,		/* OVLV5=84  */
-	0x54, 0xa3,		/* OVLY6=163 */
-	0x55, 0x54,		/* OVLU6=84    blue */
-	0x56, 0xf2,		/* OVLV6=242 */
-	0x57, 0x90,		/* OVLY7=144 */
-	0x58, 0x00,		/* OVLU7=0     black */
-	0x59, 0x00,		/* OVLV7=0   */
-
-	0x5a, 0x00,		/* CHPS=0    */
-	0x5b, 0x76,		/* GAINU=118 */
-	0x5c, 0xa5,		/* GAINV=165 */
-	0x5d, 0x3c,		/* BLCKL=60  */
-	0x5e, 0x3a,		/* BLNNL=58  */
-	0x5f, 0x3a,		/* CCRS=0, BLNVB=58 */
-	0x60, 0x00,		/* NULL      */
-
-	/* 0x61 - 0x66 set according to norm */
-
-	0x67, 0x00,		/* 0 : caption 1st byte odd  field */
-	0x68, 0x00,		/* 0 : caption 2nd byte odd  field */
-	0x69, 0x00,		/* 0 : caption 1st byte even field */
-	0x6a, 0x00,		/* 0 : caption 2nd byte even field */
-
-	0x6b, 0x91,		/* MODIN=2, PCREF=0, SCCLN=17 */
-	0x6c, 0x20,		/* SRCV1=0, TRCV2=1, ORCV1=0, PRCV1=0,
-				 * CBLF=0, ORCV2=0, PRCV2=0 */
-	0x6d, 0x00,		/* SRCM1=0, CCEN=0 */
-
-	0x6e, 0x0e,		/* HTRIG=0x005, approx. centered, at
-				 * least for PAL */
-	0x6f, 0x00,		/* HTRIG upper bits */
-	0x70, 0x20,		/* PHRES=0, SBLN=1, VTRIG=0 */
-
-	/* The following should not be needed */
-
-	0x71, 0x15,		/* BMRQ=0x115 */
-	0x72, 0x90,		/* EMRQ=0x690 */
-	0x73, 0x61,		/* EMRQ=0x690, BMRQ=0x115 */
-	0x74, 0x00,		/* NULL       */
-	0x75, 0x00,		/* NULL       */
-	0x76, 0x00,		/* NULL       */
-	0x77, 0x15,		/* BRCV=0x115 */
-	0x78, 0x90,		/* ERCV=0x690 */
-	0x79, 0x61,		/* ERCV=0x690, BRCV=0x115 */
-
-	/* Field length controls */
-
-	0x7a, 0x70,		/* FLC=0 */
-
-	/* The following should not be needed if SBLN = 1 */
-
-	0x7b, 0x16,		/* FAL=22 */
-	0x7c, 0x35,		/* LAL=244 */
-	0x7d, 0x20,		/* LAL=244, FAL=22 */
-};
-
-static const unsigned char init_pal[] = {
-	0x61, 0x1e,		/* FISE=0, PAL=1, SCBW=1, RTCE=1,
-				 * YGS=1, INPI=0, DOWN=0 */
-	0x62, 0xc8,		/* DECTYP=1, BSTA=72 */
-	0x63, 0xcb,		/* FSC0 */
-	0x64, 0x8a,		/* FSC1 */
-	0x65, 0x09,		/* FSC2 */
-	0x66, 0x2a,		/* FSC3 */
-};
-
-static const unsigned char init_ntsc[] = {
-	0x61, 0x1d,		/* FISE=1, PAL=0, SCBW=1, RTCE=1,
-				 * YGS=1, INPI=0, DOWN=0 */
-	0x62, 0xe6,		/* DECTYP=1, BSTA=102 */
-	0x63, 0x1f,		/* FSC0 */
-	0x64, 0x7c,		/* FSC1 */
-	0x65, 0xf0,		/* FSC2 */
-	0x66, 0x21,		/* FSC3 */
-};
-
-
-static int saa7185_init(struct v4l2_subdev *sd, u32 val)
-{
-	struct saa7185 *encoder = to_saa7185(sd);
-
-	saa7185_write_block(sd, init_common, sizeof(init_common));
-	if (encoder->norm & V4L2_STD_NTSC)
-		saa7185_write_block(sd, init_ntsc, sizeof(init_ntsc));
-	else
-		saa7185_write_block(sd, init_pal, sizeof(init_pal));
-	return 0;
-}
-
-static int saa7185_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct saa7185 *encoder = to_saa7185(sd);
-
-	if (std & V4L2_STD_NTSC)
-		saa7185_write_block(sd, init_ntsc, sizeof(init_ntsc));
-	else if (std & V4L2_STD_PAL)
-		saa7185_write_block(sd, init_pal, sizeof(init_pal));
-	else
-		return -EINVAL;
-	encoder->norm = std;
-	return 0;
-}
-
-static int saa7185_s_routing(struct v4l2_subdev *sd,
-			     u32 input, u32 output, u32 config)
-{
-	struct saa7185 *encoder = to_saa7185(sd);
-
-	/* RJ: input = 0: input is from SA7111
-	 input = 1: input is from ZR36060 */
-
-	switch (input) {
-	case 0:
-		/* turn off colorbar */
-		saa7185_write(sd, 0x3a, 0x0f);
-		/* Switch RTCE to 1 */
-		saa7185_write(sd, 0x61, (encoder->reg[0x61] & 0xf7) | 0x08);
-		saa7185_write(sd, 0x6e, 0x01);
-		break;
-
-	case 1:
-		/* turn off colorbar */
-		saa7185_write(sd, 0x3a, 0x0f);
-		/* Switch RTCE to 0 */
-		saa7185_write(sd, 0x61, (encoder->reg[0x61] & 0xf7) | 0x00);
-		/* SW: a slight sync problem... */
-		saa7185_write(sd, 0x6e, 0x00);
-		break;
-
-	case 2:
-		/* turn on colorbar */
-		saa7185_write(sd, 0x3a, 0x8f);
-		/* Switch RTCE to 0 */
-		saa7185_write(sd, 0x61, (encoder->reg[0x61] & 0xf7) | 0x08);
-		/* SW: a slight sync problem... */
-		saa7185_write(sd, 0x6e, 0x01);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int saa7185_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SAA7185, 0);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops saa7185_core_ops = {
-	.g_chip_ident = saa7185_g_chip_ident,
-	.init = saa7185_init,
-};
-
-static const struct v4l2_subdev_video_ops saa7185_video_ops = {
-	.s_std_output = saa7185_s_std_output,
-	.s_routing = saa7185_s_routing,
-};
-
-static const struct v4l2_subdev_ops saa7185_ops = {
-	.core = &saa7185_core_ops,
-	.video = &saa7185_video_ops,
-};
-
-
-/* ----------------------------------------------------------------------- */
-
-static int saa7185_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	int i;
-	struct saa7185 *encoder;
-	struct v4l2_subdev *sd;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -ENODEV;
-
-	v4l_info(client, "chip found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	encoder = kzalloc(sizeof(struct saa7185), GFP_KERNEL);
-	if (encoder == NULL)
-		return -ENOMEM;
-	encoder->norm = V4L2_STD_NTSC;
-	sd = &encoder->sd;
-	v4l2_i2c_subdev_init(sd, client, &saa7185_ops);
-
-	i = saa7185_write_block(sd, init_common, sizeof(init_common));
-	if (i >= 0)
-		i = saa7185_write_block(sd, init_ntsc, sizeof(init_ntsc));
-	if (i < 0)
-		v4l2_dbg(1, debug, sd, "init error %d\n", i);
-	else
-		v4l2_dbg(1, debug, sd, "revision 0x%x\n",
-				saa7185_read(sd) >> 5);
-	return 0;
-}
-
-static int saa7185_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct saa7185 *encoder = to_saa7185(sd);
-
-	v4l2_device_unregister_subdev(sd);
-	/* SW: output off is active */
-	saa7185_write(sd, 0x61, (encoder->reg[0x61]) | 0x40);
-	kfree(encoder);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct i2c_device_id saa7185_id[] = {
-	{ "saa7185", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, saa7185_id);
-
-static struct i2c_driver saa7185_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "saa7185",
-	},
-	.probe		= saa7185_probe,
-	.remove		= saa7185_remove,
-	.id_table	= saa7185_id,
-};
-
-module_i2c_driver(saa7185_driver);
diff --git a/drivers/media/video/saa7191.c b/drivers/media/video/saa7191.c
deleted file mode 100644
index d7d1670..0000000
--- a/drivers/media/video/saa7191.c
+++ /dev/null
@@ -1,659 +0,0 @@
-/*
- *  saa7191.c - Philips SAA7191 video decoder driver
- *
- *  Copyright (C) 2003 Ladislav Michl <ladis@linux-mips.org>
- *  Copyright (C) 2004,2005 Mikael Nousiainen <tmnousia@cc.hut.fi>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/major.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-
-#include <linux/videodev2.h>
-#include <linux/i2c.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-
-#include "saa7191.h"
-
-#define SAA7191_MODULE_VERSION	"0.0.5"
-
-MODULE_DESCRIPTION("Philips SAA7191 video decoder driver");
-MODULE_VERSION(SAA7191_MODULE_VERSION);
-MODULE_AUTHOR("Mikael Nousiainen <tmnousia@cc.hut.fi>");
-MODULE_LICENSE("GPL");
-
-
-// #define SAA7191_DEBUG
-
-#ifdef SAA7191_DEBUG
-#define dprintk(x...) printk("SAA7191: " x);
-#else
-#define dprintk(x...)
-#endif
-
-#define SAA7191_SYNC_COUNT	30
-#define SAA7191_SYNC_DELAY	100	/* milliseconds */
-
-struct saa7191 {
-	struct v4l2_subdev sd;
-
-	/* the register values are stored here as the actual
-	 * I2C-registers are write-only */
-	u8 reg[25];
-
-	int input;
-	v4l2_std_id norm;
-};
-
-static inline struct saa7191 *to_saa7191(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct saa7191, sd);
-}
-
-static const u8 initseq[] = {
-	0,	/* Subaddress */
-
-	0x50,	/* (0x50) SAA7191_REG_IDEL */
-
-	/* 50 Hz signal timing */
-	0x30,	/* (0x30) SAA7191_REG_HSYB */
-	0x00,	/* (0x00) SAA7191_REG_HSYS */
-	0xe8,	/* (0xe8) SAA7191_REG_HCLB */
-	0xb6,	/* (0xb6) SAA7191_REG_HCLS */
-	0xf4,	/* (0xf4) SAA7191_REG_HPHI */
-
-	/* control */
-	SAA7191_LUMA_APER_1,	/* (0x01) SAA7191_REG_LUMA - CVBS mode */
-	0x00,	/* (0x00) SAA7191_REG_HUEC */
-	0xf8,	/* (0xf8) SAA7191_REG_CKTQ */
-	0xf8,	/* (0xf8) SAA7191_REG_CKTS */
-	0x90,	/* (0x90) SAA7191_REG_PLSE */
-	0x90,	/* (0x90) SAA7191_REG_SESE */
-	0x00,	/* (0x00) SAA7191_REG_GAIN */
-	SAA7191_STDC_NFEN | SAA7191_STDC_HRMV,	/* (0x0c) SAA7191_REG_STDC
-						 * - not SECAM,
-						 * slow time constant */
-	SAA7191_IOCK_OEDC | SAA7191_IOCK_OEHS | SAA7191_IOCK_OEVS
-	| SAA7191_IOCK_OEDY,	/* (0x78) SAA7191_REG_IOCK
-				 * - chroma from CVBS, GPSW1 & 2 off */
-	SAA7191_CTL3_AUFD | SAA7191_CTL3_SCEN | SAA7191_CTL3_OFTS
-	| SAA7191_CTL3_YDEL0,	/* (0x99) SAA7191_REG_CTL3
-				 * - automatic field detection */
-	0x00,	/* (0x00) SAA7191_REG_CTL4 */
-	0x2c,	/* (0x2c) SAA7191_REG_CHCV - PAL nominal value */
-	0x00,	/* unused */
-	0x00,	/* unused */
-
-	/* 60 Hz signal timing */
-	0x34,	/* (0x34) SAA7191_REG_HS6B */
-	0x0a,	/* (0x0a) SAA7191_REG_HS6S */
-	0xf4,	/* (0xf4) SAA7191_REG_HC6B */
-	0xce,	/* (0xce) SAA7191_REG_HC6S */
-	0xf4,	/* (0xf4) SAA7191_REG_HP6I */
-};
-
-/* SAA7191 register handling */
-
-static u8 saa7191_read_reg(struct v4l2_subdev *sd, u8 reg)
-{
-	return to_saa7191(sd)->reg[reg];
-}
-
-static int saa7191_read_status(struct v4l2_subdev *sd, u8 *value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	int ret;
-
-	ret = i2c_master_recv(client, value, 1);
-	if (ret < 0) {
-		printk(KERN_ERR "SAA7191: saa7191_read_status(): read failed\n");
-		return ret;
-	}
-
-	return 0;
-}
-
-
-static int saa7191_write_reg(struct v4l2_subdev *sd, u8 reg, u8 value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	to_saa7191(sd)->reg[reg] = value;
-	return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-/* the first byte of data must be the first subaddress number (register) */
-static int saa7191_write_block(struct v4l2_subdev *sd,
-			       u8 length, const u8 *data)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct saa7191 *decoder = to_saa7191(sd);
-	int i;
-	int ret;
-
-	for (i = 0; i < (length - 1); i++) {
-		decoder->reg[data[0] + i] = data[i + 1];
-	}
-
-	ret = i2c_master_send(client, data, length);
-	if (ret < 0) {
-		printk(KERN_ERR "SAA7191: saa7191_write_block(): "
-		       "write failed\n");
-		return ret;
-	}
-
-	return 0;
-}
-
-/* Helper functions */
-
-static int saa7191_s_routing(struct v4l2_subdev *sd,
-			     u32 input, u32 output, u32 config)
-{
-	struct saa7191 *decoder = to_saa7191(sd);
-	u8 luma = saa7191_read_reg(sd, SAA7191_REG_LUMA);
-	u8 iock = saa7191_read_reg(sd, SAA7191_REG_IOCK);
-	int err;
-
-	switch (input) {
-	case SAA7191_INPUT_COMPOSITE: /* Set Composite input */
-		iock &= ~(SAA7191_IOCK_CHRS | SAA7191_IOCK_GPSW1
-			  | SAA7191_IOCK_GPSW2);
-		/* Chrominance trap active */
-		luma &= ~SAA7191_LUMA_BYPS;
-		break;
-	case SAA7191_INPUT_SVIDEO: /* Set S-Video input */
-		iock |= SAA7191_IOCK_CHRS | SAA7191_IOCK_GPSW2;
-		/* Chrominance trap bypassed */
-		luma |= SAA7191_LUMA_BYPS;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	err = saa7191_write_reg(sd, SAA7191_REG_LUMA, luma);
-	if (err)
-		return -EIO;
-	err = saa7191_write_reg(sd, SAA7191_REG_IOCK, iock);
-	if (err)
-		return -EIO;
-
-	decoder->input = input;
-
-	return 0;
-}
-
-static int saa7191_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
-{
-	struct saa7191 *decoder = to_saa7191(sd);
-	u8 stdc = saa7191_read_reg(sd, SAA7191_REG_STDC);
-	u8 ctl3 = saa7191_read_reg(sd, SAA7191_REG_CTL3);
-	u8 chcv = saa7191_read_reg(sd, SAA7191_REG_CHCV);
-	int err;
-
-	if (norm & V4L2_STD_PAL) {
-		stdc &= ~SAA7191_STDC_SECS;
-		ctl3 &= ~(SAA7191_CTL3_AUFD | SAA7191_CTL3_FSEL);
-		chcv = SAA7191_CHCV_PAL;
-	} else if (norm & V4L2_STD_NTSC) {
-		stdc &= ~SAA7191_STDC_SECS;
-		ctl3 &= ~SAA7191_CTL3_AUFD;
-		ctl3 |= SAA7191_CTL3_FSEL;
-		chcv = SAA7191_CHCV_NTSC;
-	} else if (norm & V4L2_STD_SECAM) {
-		stdc |= SAA7191_STDC_SECS;
-		ctl3 &= ~(SAA7191_CTL3_AUFD | SAA7191_CTL3_FSEL);
-		chcv = SAA7191_CHCV_PAL;
-	} else {
-		return -EINVAL;
-	}
-
-	err = saa7191_write_reg(sd, SAA7191_REG_CTL3, ctl3);
-	if (err)
-		return -EIO;
-	err = saa7191_write_reg(sd, SAA7191_REG_STDC, stdc);
-	if (err)
-		return -EIO;
-	err = saa7191_write_reg(sd, SAA7191_REG_CHCV, chcv);
-	if (err)
-		return -EIO;
-
-	decoder->norm = norm;
-
-	dprintk("ctl3: %02x stdc: %02x chcv: %02x\n", ctl3,
-		stdc, chcv);
-	dprintk("norm: %llx\n", norm);
-
-	return 0;
-}
-
-static int saa7191_wait_for_signal(struct v4l2_subdev *sd, u8 *status)
-{
-	int i = 0;
-
-	dprintk("Checking for signal...\n");
-
-	for (i = 0; i < SAA7191_SYNC_COUNT; i++) {
-		if (saa7191_read_status(sd, status))
-			return -EIO;
-
-		if (((*status) & SAA7191_STATUS_HLCK) == 0) {
-			dprintk("Signal found\n");
-			return 0;
-		}
-
-		msleep(SAA7191_SYNC_DELAY);
-	}
-
-	dprintk("No signal\n");
-
-	return -EBUSY;
-}
-
-static int saa7191_querystd(struct v4l2_subdev *sd, v4l2_std_id *norm)
-{
-	struct saa7191 *decoder = to_saa7191(sd);
-	u8 stdc = saa7191_read_reg(sd, SAA7191_REG_STDC);
-	u8 ctl3 = saa7191_read_reg(sd, SAA7191_REG_CTL3);
-	u8 status;
-	v4l2_std_id old_norm = decoder->norm;
-	int err = 0;
-
-	dprintk("SAA7191 extended signal auto-detection...\n");
-
-	*norm = V4L2_STD_NTSC | V4L2_STD_PAL | V4L2_STD_SECAM;
-	stdc &= ~SAA7191_STDC_SECS;
-	ctl3 &= ~(SAA7191_CTL3_FSEL);
-
-	err = saa7191_write_reg(sd, SAA7191_REG_STDC, stdc);
-	if (err) {
-		err = -EIO;
-		goto out;
-	}
-	err = saa7191_write_reg(sd, SAA7191_REG_CTL3, ctl3);
-	if (err) {
-		err = -EIO;
-		goto out;
-	}
-
-	ctl3 |= SAA7191_CTL3_AUFD;
-	err = saa7191_write_reg(sd, SAA7191_REG_CTL3, ctl3);
-	if (err) {
-		err = -EIO;
-		goto out;
-	}
-
-	msleep(SAA7191_SYNC_DELAY);
-
-	err = saa7191_wait_for_signal(sd, &status);
-	if (err)
-		goto out;
-
-	if (status & SAA7191_STATUS_FIDT) {
-		/* 60Hz signal -> NTSC */
-		dprintk("60Hz signal: NTSC\n");
-		*norm = V4L2_STD_NTSC;
-		return 0;
-	}
-
-	/* 50Hz signal */
-	dprintk("50Hz signal: Trying PAL...\n");
-
-	/* try PAL first */
-	err = saa7191_s_std(sd, V4L2_STD_PAL);
-	if (err)
-		goto out;
-
-	msleep(SAA7191_SYNC_DELAY);
-
-	err = saa7191_wait_for_signal(sd, &status);
-	if (err)
-		goto out;
-
-	/* not 50Hz ? */
-	if (status & SAA7191_STATUS_FIDT) {
-		dprintk("No 50Hz signal\n");
-		saa7191_s_std(sd, old_norm);
-		return -EAGAIN;
-	}
-
-	if (status & SAA7191_STATUS_CODE) {
-		dprintk("PAL\n");
-		*norm = V4L2_STD_PAL;
-		return saa7191_s_std(sd, old_norm);
-	}
-
-	dprintk("No color detected with PAL - Trying SECAM...\n");
-
-	/* no color detected ? -> try SECAM */
-	err = saa7191_s_std(sd, V4L2_STD_SECAM);
-	if (err)
-		goto out;
-
-	msleep(SAA7191_SYNC_DELAY);
-
-	err = saa7191_wait_for_signal(sd, &status);
-	if (err)
-		goto out;
-
-	/* not 50Hz ? */
-	if (status & SAA7191_STATUS_FIDT) {
-		dprintk("No 50Hz signal\n");
-		err = -EAGAIN;
-		goto out;
-	}
-
-	if (status & SAA7191_STATUS_CODE) {
-		/* Color detected -> SECAM */
-		dprintk("SECAM\n");
-		*norm = V4L2_STD_SECAM;
-		return saa7191_s_std(sd, old_norm);
-	}
-
-	dprintk("No color detected with SECAM - Going back to PAL.\n");
-
-out:
-	return saa7191_s_std(sd, old_norm);
-}
-
-static int saa7191_autodetect_norm(struct v4l2_subdev *sd)
-{
-	u8 status;
-
-	dprintk("SAA7191 signal auto-detection...\n");
-
-	dprintk("Reading status...\n");
-
-	if (saa7191_read_status(sd, &status))
-		return -EIO;
-
-	dprintk("Checking for signal...\n");
-
-	/* no signal ? */
-	if (status & SAA7191_STATUS_HLCK) {
-		dprintk("No signal\n");
-		return -EBUSY;
-	}
-
-	dprintk("Signal found\n");
-
-	if (status & SAA7191_STATUS_FIDT) {
-		/* 60hz signal -> NTSC */
-		dprintk("NTSC\n");
-		return saa7191_s_std(sd, V4L2_STD_NTSC);
-	} else {
-		/* 50hz signal -> PAL */
-		dprintk("PAL\n");
-		return saa7191_s_std(sd, V4L2_STD_PAL);
-	}
-}
-
-static int saa7191_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	u8 reg;
-	int ret = 0;
-
-	switch (ctrl->id) {
-	case SAA7191_CONTROL_BANDPASS:
-	case SAA7191_CONTROL_BANDPASS_WEIGHT:
-	case SAA7191_CONTROL_CORING:
-		reg = saa7191_read_reg(sd, SAA7191_REG_LUMA);
-		switch (ctrl->id) {
-		case SAA7191_CONTROL_BANDPASS:
-			ctrl->value = ((s32)reg & SAA7191_LUMA_BPSS_MASK)
-				>> SAA7191_LUMA_BPSS_SHIFT;
-			break;
-		case SAA7191_CONTROL_BANDPASS_WEIGHT:
-			ctrl->value = ((s32)reg & SAA7191_LUMA_APER_MASK)
-				>> SAA7191_LUMA_APER_SHIFT;
-			break;
-		case SAA7191_CONTROL_CORING:
-			ctrl->value = ((s32)reg & SAA7191_LUMA_CORI_MASK)
-				>> SAA7191_LUMA_CORI_SHIFT;
-			break;
-		}
-		break;
-	case SAA7191_CONTROL_FORCE_COLOUR:
-	case SAA7191_CONTROL_CHROMA_GAIN:
-		reg = saa7191_read_reg(sd, SAA7191_REG_GAIN);
-		if (ctrl->id == SAA7191_CONTROL_FORCE_COLOUR)
-			ctrl->value = ((s32)reg & SAA7191_GAIN_COLO) ? 1 : 0;
-		else
-			ctrl->value = ((s32)reg & SAA7191_GAIN_LFIS_MASK)
-				>> SAA7191_GAIN_LFIS_SHIFT;
-		break;
-	case V4L2_CID_HUE:
-		reg = saa7191_read_reg(sd, SAA7191_REG_HUEC);
-		if (reg < 0x80)
-			reg += 0x80;
-		else
-			reg -= 0x80;
-		ctrl->value = (s32)reg;
-		break;
-	case SAA7191_CONTROL_VTRC:
-		reg = saa7191_read_reg(sd, SAA7191_REG_STDC);
-		ctrl->value = ((s32)reg & SAA7191_STDC_VTRC) ? 1 : 0;
-		break;
-	case SAA7191_CONTROL_LUMA_DELAY:
-		reg = saa7191_read_reg(sd, SAA7191_REG_CTL3);
-		ctrl->value = ((s32)reg & SAA7191_CTL3_YDEL_MASK)
-			>> SAA7191_CTL3_YDEL_SHIFT;
-		if (ctrl->value >= 4)
-			ctrl->value -= 8;
-		break;
-	case SAA7191_CONTROL_VNR:
-		reg = saa7191_read_reg(sd, SAA7191_REG_CTL4);
-		ctrl->value = ((s32)reg & SAA7191_CTL4_VNOI_MASK)
-			>> SAA7191_CTL4_VNOI_SHIFT;
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
-static int saa7191_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	u8 reg;
-	int ret = 0;
-
-	switch (ctrl->id) {
-	case SAA7191_CONTROL_BANDPASS:
-	case SAA7191_CONTROL_BANDPASS_WEIGHT:
-	case SAA7191_CONTROL_CORING:
-		reg = saa7191_read_reg(sd, SAA7191_REG_LUMA);
-		switch (ctrl->id) {
-		case SAA7191_CONTROL_BANDPASS:
-			reg &= ~SAA7191_LUMA_BPSS_MASK;
-			reg |= (ctrl->value << SAA7191_LUMA_BPSS_SHIFT)
-				& SAA7191_LUMA_BPSS_MASK;
-			break;
-		case SAA7191_CONTROL_BANDPASS_WEIGHT:
-			reg &= ~SAA7191_LUMA_APER_MASK;
-			reg |= (ctrl->value << SAA7191_LUMA_APER_SHIFT)
-				& SAA7191_LUMA_APER_MASK;
-			break;
-		case SAA7191_CONTROL_CORING:
-			reg &= ~SAA7191_LUMA_CORI_MASK;
-			reg |= (ctrl->value << SAA7191_LUMA_CORI_SHIFT)
-				& SAA7191_LUMA_CORI_MASK;
-			break;
-		}
-		ret = saa7191_write_reg(sd, SAA7191_REG_LUMA, reg);
-		break;
-	case SAA7191_CONTROL_FORCE_COLOUR:
-	case SAA7191_CONTROL_CHROMA_GAIN:
-		reg = saa7191_read_reg(sd, SAA7191_REG_GAIN);
-		if (ctrl->id == SAA7191_CONTROL_FORCE_COLOUR) {
-			if (ctrl->value)
-				reg |= SAA7191_GAIN_COLO;
-			else
-				reg &= ~SAA7191_GAIN_COLO;
-		} else {
-			reg &= ~SAA7191_GAIN_LFIS_MASK;
-			reg |= (ctrl->value << SAA7191_GAIN_LFIS_SHIFT)
-				& SAA7191_GAIN_LFIS_MASK;
-		}
-		ret = saa7191_write_reg(sd, SAA7191_REG_GAIN, reg);
-		break;
-	case V4L2_CID_HUE:
-		reg = ctrl->value & 0xff;
-		if (reg < 0x80)
-			reg += 0x80;
-		else
-			reg -= 0x80;
-		ret = saa7191_write_reg(sd, SAA7191_REG_HUEC, reg);
-		break;
-	case SAA7191_CONTROL_VTRC:
-		reg = saa7191_read_reg(sd, SAA7191_REG_STDC);
-		if (ctrl->value)
-			reg |= SAA7191_STDC_VTRC;
-		else
-			reg &= ~SAA7191_STDC_VTRC;
-		ret = saa7191_write_reg(sd, SAA7191_REG_STDC, reg);
-		break;
-	case SAA7191_CONTROL_LUMA_DELAY: {
-		s32 value = ctrl->value;
-		if (value < 0)
-			value += 8;
-		reg = saa7191_read_reg(sd, SAA7191_REG_CTL3);
-		reg &= ~SAA7191_CTL3_YDEL_MASK;
-		reg |= (value << SAA7191_CTL3_YDEL_SHIFT)
-			& SAA7191_CTL3_YDEL_MASK;
-		ret = saa7191_write_reg(sd, SAA7191_REG_CTL3, reg);
-		break;
-	}
-	case SAA7191_CONTROL_VNR:
-		reg = saa7191_read_reg(sd, SAA7191_REG_CTL4);
-		reg &= ~SAA7191_CTL4_VNOI_MASK;
-		reg |= (ctrl->value << SAA7191_CTL4_VNOI_SHIFT)
-			& SAA7191_CTL4_VNOI_MASK;
-		ret = saa7191_write_reg(sd, SAA7191_REG_CTL4, reg);
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
-/* I2C-interface */
-
-static int saa7191_g_input_status(struct v4l2_subdev *sd, u32 *status)
-{
-	u8 status_reg;
-	int res = V4L2_IN_ST_NO_SIGNAL;
-
-	if (saa7191_read_status(sd, &status_reg))
-		return -EIO;
-	if ((status_reg & SAA7191_STATUS_HLCK) == 0)
-		res = 0;
-	if (!(status_reg & SAA7191_STATUS_CODE))
-		res |= V4L2_IN_ST_NO_COLOR;
-	*status = res;
-	return 0;
-}
-
-
-static int saa7191_g_chip_ident(struct v4l2_subdev *sd,
-		struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SAA7191, 0);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops saa7191_core_ops = {
-	.g_chip_ident = saa7191_g_chip_ident,
-	.g_ctrl = saa7191_g_ctrl,
-	.s_ctrl = saa7191_s_ctrl,
-	.s_std = saa7191_s_std,
-};
-
-static const struct v4l2_subdev_video_ops saa7191_video_ops = {
-	.s_routing = saa7191_s_routing,
-	.querystd = saa7191_querystd,
-	.g_input_status = saa7191_g_input_status,
-};
-
-static const struct v4l2_subdev_ops saa7191_ops = {
-	.core = &saa7191_core_ops,
-	.video = &saa7191_video_ops,
-};
-
-static int saa7191_probe(struct i2c_client *client,
-			  const struct i2c_device_id *id)
-{
-	int err = 0;
-	struct saa7191 *decoder;
-	struct v4l2_subdev *sd;
-
-	v4l_info(client, "chip found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	decoder = kzalloc(sizeof(*decoder), GFP_KERNEL);
-	if (!decoder)
-		return -ENOMEM;
-
-	sd = &decoder->sd;
-	v4l2_i2c_subdev_init(sd, client, &saa7191_ops);
-
-	err = saa7191_write_block(sd, sizeof(initseq), initseq);
-	if (err) {
-		printk(KERN_ERR "SAA7191 initialization failed\n");
-		kfree(decoder);
-		return err;
-	}
-
-	printk(KERN_INFO "SAA7191 initialized\n");
-
-	decoder->input = SAA7191_INPUT_COMPOSITE;
-	decoder->norm = V4L2_STD_PAL;
-
-	err = saa7191_autodetect_norm(sd);
-	if (err && (err != -EBUSY))
-		printk(KERN_ERR "SAA7191: Signal auto-detection failed\n");
-
-	return 0;
-}
-
-static int saa7191_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-
-	v4l2_device_unregister_subdev(sd);
-	kfree(to_saa7191(sd));
-	return 0;
-}
-
-static const struct i2c_device_id saa7191_id[] = {
-	{ "saa7191", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, saa7191_id);
-
-static struct i2c_driver saa7191_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "saa7191",
-	},
-	.probe		= saa7191_probe,
-	.remove		= saa7191_remove,
-	.id_table	= saa7191_id,
-};
-
-module_i2c_driver(saa7191_driver);
diff --git a/drivers/media/video/saa7191.h b/drivers/media/video/saa7191.h
deleted file mode 100644
index 803c74d..0000000
--- a/drivers/media/video/saa7191.h
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- *  saa7191.h - Philips SAA7191 video decoder driver
- *
- *  Copyright (C) 2003 Ladislav Michl <ladis@linux-mips.org>
- *  Copyright (C) 2004,2005 Mikael Nousiainen <tmnousia@cc.hut.fi>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef _SAA7191_H_
-#define _SAA7191_H_
-
-/* Philips SAA7191 DMSD I2C bus address */
-#define SAA7191_ADDR		0x8a
-
-/* Register subaddresses. */
-#define SAA7191_REG_IDEL	0x00
-#define SAA7191_REG_HSYB	0x01
-#define SAA7191_REG_HSYS	0x02
-#define SAA7191_REG_HCLB	0x03
-#define SAA7191_REG_HCLS	0x04
-#define SAA7191_REG_HPHI	0x05
-#define SAA7191_REG_LUMA	0x06
-#define SAA7191_REG_HUEC	0x07
-#define SAA7191_REG_CKTQ	0x08 /* bits 3-7 */
-#define SAA7191_REG_CKTS	0x09 /* bits 3-7 */
-#define SAA7191_REG_PLSE	0x0a
-#define SAA7191_REG_SESE	0x0b
-#define SAA7191_REG_GAIN	0x0c
-#define SAA7191_REG_STDC	0x0d
-#define SAA7191_REG_IOCK	0x0e
-#define SAA7191_REG_CTL3	0x0f
-#define SAA7191_REG_CTL4	0x10
-#define SAA7191_REG_CHCV	0x11
-#define SAA7191_REG_HS6B	0x14
-#define SAA7191_REG_HS6S	0x15
-#define SAA7191_REG_HC6B	0x16
-#define SAA7191_REG_HC6S	0x17
-#define SAA7191_REG_HP6I	0x18
-#define SAA7191_REG_STATUS	0xff	/* not really a subaddress */
-
-/* Status Register definitions */
-#define SAA7191_STATUS_CODE	0x01	/* color detected flag */
-#define SAA7191_STATUS_FIDT	0x20	/* signal type 50/60 Hz */
-#define SAA7191_STATUS_HLCK	0x40	/* PLL unlocked(1)/locked(0) */
-#define SAA7191_STATUS_STTC	0x80	/* tv/vtr time constant */
-
-/* Luminance Control Register definitions */
-/* input mode select bit:
- * 0=CVBS (chrominance trap active), 1=S-Video (trap bypassed) */
-#define SAA7191_LUMA_BYPS	0x80
-/* pre-filter (only when chrominance trap is active) */
-#define SAA7191_LUMA_PREF	0x40
-/* aperture bandpass to select different characteristics with maximums
- * (bits 4-5) */
-#define SAA7191_LUMA_BPSS_MASK	0x30
-#define SAA7191_LUMA_BPSS_SHIFT	4
-#define SAA7191_LUMA_BPSS_3	0x30
-#define SAA7191_LUMA_BPSS_2	0x20
-#define SAA7191_LUMA_BPSS_1	0x10
-#define SAA7191_LUMA_BPSS_0	0x00
-/* coring range for high frequency components according to 8-bit luminance
- * (bits 2-3)
- * 0=coring off, n= (+-)n LSB */
-#define SAA7191_LUMA_CORI_MASK	0x0c
-#define SAA7191_LUMA_CORI_SHIFT	2
-#define SAA7191_LUMA_CORI_3	0x0c
-#define SAA7191_LUMA_CORI_2	0x08
-#define SAA7191_LUMA_CORI_1	0x04
-#define SAA7191_LUMA_CORI_0	0x00
-/* aperture bandpass filter weights high frequency components of luminance
- * signal (bits 0-1)
- * 0=factor 0, 1=0.25, 2=0.5, 3=1 */
-#define SAA7191_LUMA_APER_MASK	0x03
-#define SAA7191_LUMA_APER_SHIFT	0
-#define SAA7191_LUMA_APER_3	0x03
-#define SAA7191_LUMA_APER_2	0x02
-#define SAA7191_LUMA_APER_1	0x01
-#define SAA7191_LUMA_APER_0	0x00
-
-/* Chrominance Gain Control Settings Register definitions */
-/* colour on: 0=automatic colour-killer enabled, 1=forced colour on */
-#define SAA7191_GAIN_COLO	0x80
-/* chrominance gain control (AGC filter)
- * 0=loop filter time constant slow, 1=medium, 2=fast, 3=actual gain */
-#define SAA7191_GAIN_LFIS_MASK	0x60
-#define SAA7191_GAIN_LFIS_SHIFT	5
-#define SAA7191_GAIN_LFIS_3	0x60
-#define SAA7191_GAIN_LFIS_2	0x40
-#define SAA7191_GAIN_LFIS_1	0x20
-#define SAA7191_GAIN_LFIS_0	0x00
-
-/* Standard/Mode Control Register definitions */
-/* tv/vtr mode bit: 0=TV mode (slow time constant),
- * 1=VTR mode (fast time constant) */
-#define SAA7191_STDC_VTRC	0x80
-/* SAA7191B-specific functions enable (RTCO, ODD and GPSW0 outputs)
- * 0=outputs set to high-impedance (circuit equals SAA7191), 1=enabled */
-#define SAA7191_STDC_NFEN	0x08
-/* HREF generation: 0=like SAA7191, 1=HREF is 8xLLC2 clocks earlier */
-#define SAA7191_STDC_HRMV	0x04
-/* general purpose switch 0
- * (not used with VINO afaik) */
-#define SAA7191_STDC_GPSW0	0x02
-/* SECAM mode bit: 0=other standards, 1=SECAM */
-#define SAA7191_STDC_SECS	0x01
-
-/* I/O and Clock Control Register definitions */
-/* horizontal clock PLL: 0=PLL closed,
- * 1=PLL circuit open and horizontal freq fixed */
-#define SAA7191_IOCK_HPLL	0x80
-/* colour-difference output enable (outputs UV0-UV7) */
-#define SAA7191_IOCK_OEDC	0x40
-/* H-sync output enable */
-#define SAA7191_IOCK_OEHS	0x20
-/* V-sync output enable */
-#define SAA7191_IOCK_OEVS	0x10
-/* luminance output enable (outputs Y0-Y7) */
-#define SAA7191_IOCK_OEDY	0x08
-/* S-VHS bit (chrominance from CVBS or from chrominance input):
- * 0=controlled by BYPS-bit, 1=from chrominance input */
-#define SAA7191_IOCK_CHRS	0x04
-/* general purpose switch 2
- * VINO-specific: 0=used with CVBS, 1=used with S-Video */
-#define SAA7191_IOCK_GPSW2	0x02
-/* general purpose switch 1 */
-/* VINO-specific: 0=always, 1=not used!*/
-#define SAA7191_IOCK_GPSW1	0x01
-
-/* Miscellaneous Control #1 Register definitions */
-/* automatic field detection (50/60Hz standard) */
-#define SAA7191_CTL3_AUFD	0x80
-/* field select: (if AUFD=0)
- * 0=50Hz (625 lines), 1=60Hz (525 lines) */
-#define SAA7191_CTL3_FSEL	0x40
-/* SECAM cross-colour reduction enable */
-#define SAA7191_CTL3_SXCR	0x20
-/* sync and clamping pulse enable (HCL and HSY outputs) */
-#define SAA7191_CTL3_SCEN	0x10
-/* output format: 0=4:1:1, 1=4:2:2 (4:2:2 for VINO) */
-#define SAA7191_CTL3_OFTS	0x08
-/* luminance delay compensation
- * 0=0*2/LLC,  1=+1*2/LLC, 2=+2*2/LLC, 3=+3*2/LLC,
- * 4=-4*2/LLC, 5=-3*2/LLC, 6=-2*2/LLC, 7=-1*2/LLC
- * step size = 2/LLC = 67.8ns for 50Hz, 81.5ns for 60Hz */
-#define SAA7191_CTL3_YDEL_MASK	0x07
-#define SAA7191_CTL3_YDEL_SHIFT	0
-#define SAA7191_CTL3_YDEL2	0x04
-#define SAA7191_CTL3_YDEL1	0x02
-#define SAA7191_CTL3_YDEL0	0x01
-
-/* Miscellaneous Control #2 Register definitions */
-/* select HREF position
- * 0=normal, HREF is matched to YUV output port,
- * 1=HREF is matched to CVBS input port */
-#define SAA7191_CTL4_HRFS	0x04
-/* vertical noise reduction
- * 0=normal, 1=searching window, 2=auto-deflection, 3=reduction bypassed */
-#define SAA7191_CTL4_VNOI_MASK	0x03
-#define SAA7191_CTL4_VNOI_SHIFT	0
-#define SAA7191_CTL4_VNOI_3	0x03
-#define SAA7191_CTL4_VNOI_2	0x02
-#define SAA7191_CTL4_VNOI_1	0x01
-#define SAA7191_CTL4_VNOI_0	0x00
-
-/* Chrominance Gain Control Register definitions
- * - for QAM-modulated input signals, effects output amplitude
- * (SECAM gain fixed)
- * (nominal values for UV CCIR level) */
-#define SAA7191_CHCV_NTSC	0x2c
-#define SAA7191_CHCV_PAL	0x59
-
-/* Driver interface definitions */
-#define SAA7191_INPUT_COMPOSITE	0
-#define SAA7191_INPUT_SVIDEO	1
-
-#define SAA7191_NORM_PAL	1
-#define SAA7191_NORM_NTSC	2
-#define SAA7191_NORM_SECAM	3
-
-struct saa7191_status {
-	/* 0=no signal, 1=signal detected */
-	int signal;
-	/* 0=50hz (pal) signal, 1=60hz (ntsc) signal */
-	int signal_60hz;
-	/* 0=no color detected, 1=color detected */
-	int color;
-
-	/* current SAA7191_INPUT_ */
-	int input;
-	/* current SAA7191_NORM_ */
-	int norm;
-};
-
-#define SAA7191_BANDPASS_MIN		0x00
-#define SAA7191_BANDPASS_MAX		0x03
-#define SAA7191_BANDPASS_DEFAULT	0x00
-
-#define SAA7191_BANDPASS_WEIGHT_MIN	0x00
-#define SAA7191_BANDPASS_WEIGHT_MAX	0x03
-#define SAA7191_BANDPASS_WEIGHT_DEFAULT	0x01
-
-#define SAA7191_CORING_MIN		0x00
-#define SAA7191_CORING_MAX		0x03
-#define SAA7191_CORING_DEFAULT		0x00
-
-#define SAA7191_HUE_MIN			0x00
-#define SAA7191_HUE_MAX			0xff
-#define SAA7191_HUE_DEFAULT		0x80
-
-#define SAA7191_VTRC_MIN		0x00
-#define SAA7191_VTRC_MAX		0x01
-#define SAA7191_VTRC_DEFAULT		0x00
-
-#define SAA7191_FORCE_COLOUR_MIN	0x00
-#define SAA7191_FORCE_COLOUR_MAX	0x01
-#define SAA7191_FORCE_COLOUR_DEFAULT	0x00
-
-#define SAA7191_CHROMA_GAIN_MIN		0x00
-#define SAA7191_CHROMA_GAIN_MAX		0x03
-#define SAA7191_CHROMA_GAIN_DEFAULT	0x00
-
-#define SAA7191_LUMA_DELAY_MIN		-0x04
-#define SAA7191_LUMA_DELAY_MAX		0x03
-#define SAA7191_LUMA_DELAY_DEFAULT	0x01
-
-#define SAA7191_VNR_MIN			0x00
-#define SAA7191_VNR_MAX			0x03
-#define SAA7191_VNR_DEFAULT		0x00
-
-#define SAA7191_CONTROL_BANDPASS	(V4L2_CID_PRIVATE_BASE + 0)
-#define SAA7191_CONTROL_BANDPASS_WEIGHT	(V4L2_CID_PRIVATE_BASE + 1)
-#define SAA7191_CONTROL_CORING		(V4L2_CID_PRIVATE_BASE + 2)
-#define SAA7191_CONTROL_FORCE_COLOUR	(V4L2_CID_PRIVATE_BASE + 3)
-#define SAA7191_CONTROL_CHROMA_GAIN	(V4L2_CID_PRIVATE_BASE + 4)
-#define SAA7191_CONTROL_VTRC		(V4L2_CID_PRIVATE_BASE + 5)
-#define SAA7191_CONTROL_LUMA_DELAY	(V4L2_CID_PRIVATE_BASE + 6)
-#define SAA7191_CONTROL_VNR		(V4L2_CID_PRIVATE_BASE + 7)
-
-#define	DECODER_SAA7191_GET_STATUS	_IOR('d', 195, struct saa7191_status)
-#define	DECODER_SAA7191_SET_NORM	_IOW('d', 196, int)
-
-#endif
diff --git a/drivers/media/video/smiapp-pll.c b/drivers/media/video/smiapp-pll.c
deleted file mode 100644
index a2e41a2..0000000
--- a/drivers/media/video/smiapp-pll.c
+++ /dev/null
@@ -1,418 +0,0 @@
-/*
- * drivers/media/video/smiapp-pll.c
- *
- * Generic driver for SMIA/SMIA++ compliant camera modules
- *
- * Copyright (C) 2011--2012 Nokia Corporation
- * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/gcd.h>
-#include <linux/lcm.h>
-#include <linux/module.h>
-
-#include "smiapp-pll.h"
-
-/* Return an even number or one. */
-static inline uint32_t clk_div_even(uint32_t a)
-{
-	return max_t(uint32_t, 1, a & ~1);
-}
-
-/* Return an even number or one. */
-static inline uint32_t clk_div_even_up(uint32_t a)
-{
-	if (a == 1)
-		return 1;
-	return (a + 1) & ~1;
-}
-
-static inline uint32_t is_one_or_even(uint32_t a)
-{
-	if (a == 1)
-		return 1;
-	if (a & 1)
-		return 0;
-
-	return 1;
-}
-
-static int bounds_check(struct device *dev, uint32_t val,
-			uint32_t min, uint32_t max, char *str)
-{
-	if (val >= min && val <= max)
-		return 0;
-
-	dev_warn(dev, "%s out of bounds: %d (%d--%d)\n", str, val, min, max);
-
-	return -EINVAL;
-}
-
-static void print_pll(struct device *dev, struct smiapp_pll *pll)
-{
-	dev_dbg(dev, "pre_pll_clk_div\t%d\n",  pll->pre_pll_clk_div);
-	dev_dbg(dev, "pll_multiplier \t%d\n",  pll->pll_multiplier);
-	if (pll->flags != SMIAPP_PLL_FLAG_NO_OP_CLOCKS) {
-		dev_dbg(dev, "op_sys_clk_div \t%d\n", pll->op_sys_clk_div);
-		dev_dbg(dev, "op_pix_clk_div \t%d\n", pll->op_pix_clk_div);
-	}
-	dev_dbg(dev, "vt_sys_clk_div \t%d\n",  pll->vt_sys_clk_div);
-	dev_dbg(dev, "vt_pix_clk_div \t%d\n",  pll->vt_pix_clk_div);
-
-	dev_dbg(dev, "ext_clk_freq_hz \t%d\n", pll->ext_clk_freq_hz);
-	dev_dbg(dev, "pll_ip_clk_freq_hz \t%d\n", pll->pll_ip_clk_freq_hz);
-	dev_dbg(dev, "pll_op_clk_freq_hz \t%d\n", pll->pll_op_clk_freq_hz);
-	if (pll->flags & SMIAPP_PLL_FLAG_NO_OP_CLOCKS) {
-		dev_dbg(dev, "op_sys_clk_freq_hz \t%d\n",
-			pll->op_sys_clk_freq_hz);
-		dev_dbg(dev, "op_pix_clk_freq_hz \t%d\n",
-			pll->op_pix_clk_freq_hz);
-	}
-	dev_dbg(dev, "vt_sys_clk_freq_hz \t%d\n", pll->vt_sys_clk_freq_hz);
-	dev_dbg(dev, "vt_pix_clk_freq_hz \t%d\n", pll->vt_pix_clk_freq_hz);
-}
-
-int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
-			 struct smiapp_pll *pll)
-{
-	uint32_t sys_div;
-	uint32_t best_pix_div = INT_MAX >> 1;
-	uint32_t vt_op_binning_div;
-	uint32_t lane_op_clock_ratio;
-	uint32_t mul, div;
-	uint32_t more_mul_min, more_mul_max;
-	uint32_t more_mul_factor;
-	uint32_t min_vt_div, max_vt_div, vt_div;
-	uint32_t min_sys_div, max_sys_div;
-	unsigned int i;
-	int rval;
-
-	if (pll->flags & SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE)
-		lane_op_clock_ratio = pll->lanes;
-	else
-		lane_op_clock_ratio = 1;
-	dev_dbg(dev, "lane_op_clock_ratio: %d\n", lane_op_clock_ratio);
-
-	dev_dbg(dev, "binning: %dx%d\n", pll->binning_horizontal,
-		pll->binning_vertical);
-
-	/* CSI transfers 2 bits per clock per lane; thus times 2 */
-	pll->pll_op_clk_freq_hz = pll->link_freq * 2
-		* (pll->lanes / lane_op_clock_ratio);
-
-	/* Figure out limits for pre-pll divider based on extclk */
-	dev_dbg(dev, "min / max pre_pll_clk_div: %d / %d\n",
-		limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
-	limits->max_pre_pll_clk_div =
-		min_t(uint16_t, limits->max_pre_pll_clk_div,
-		      clk_div_even(pll->ext_clk_freq_hz /
-				   limits->min_pll_ip_freq_hz));
-	limits->min_pre_pll_clk_div =
-		max_t(uint16_t, limits->min_pre_pll_clk_div,
-		      clk_div_even_up(
-			      DIV_ROUND_UP(pll->ext_clk_freq_hz,
-					   limits->max_pll_ip_freq_hz)));
-	dev_dbg(dev, "pre-pll check: min / max pre_pll_clk_div: %d / %d\n",
-		limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
-
-	i = gcd(pll->pll_op_clk_freq_hz, pll->ext_clk_freq_hz);
-	mul = div_u64(pll->pll_op_clk_freq_hz, i);
-	div = pll->ext_clk_freq_hz / i;
-	dev_dbg(dev, "mul %d / div %d\n", mul, div);
-
-	limits->min_pre_pll_clk_div =
-		max_t(uint16_t, limits->min_pre_pll_clk_div,
-		      clk_div_even_up(
-			      DIV_ROUND_UP(mul * pll->ext_clk_freq_hz,
-					   limits->max_pll_op_freq_hz)));
-	dev_dbg(dev, "pll_op check: min / max pre_pll_clk_div: %d / %d\n",
-		limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
-
-	if (limits->min_pre_pll_clk_div > limits->max_pre_pll_clk_div) {
-		dev_err(dev, "unable to compute pre_pll divisor\n");
-		return -EINVAL;
-	}
-
-	pll->pre_pll_clk_div = limits->min_pre_pll_clk_div;
-
-	/*
-	 * Get pre_pll_clk_div so that our pll_op_clk_freq_hz won't be
-	 * too high.
-	 */
-	dev_dbg(dev, "pre_pll_clk_div %d\n", pll->pre_pll_clk_div);
-
-	/* Don't go above max pll multiplier. */
-	more_mul_max = limits->max_pll_multiplier / mul;
-	dev_dbg(dev, "more_mul_max: max_pll_multiplier check: %d\n",
-		more_mul_max);
-	/* Don't go above max pll op frequency. */
-	more_mul_max =
-		min_t(int,
-		      more_mul_max,
-		      limits->max_pll_op_freq_hz
-		      / (pll->ext_clk_freq_hz / pll->pre_pll_clk_div * mul));
-	dev_dbg(dev, "more_mul_max: max_pll_op_freq_hz check: %d\n",
-		more_mul_max);
-	/* Don't go above the division capability of op sys clock divider. */
-	more_mul_max = min(more_mul_max,
-			   limits->max_op_sys_clk_div * pll->pre_pll_clk_div
-			   / div);
-	dev_dbg(dev, "more_mul_max: max_op_sys_clk_div check: %d\n",
-		more_mul_max);
-	/* Ensure we won't go above min_pll_multiplier. */
-	more_mul_max = min(more_mul_max,
-			   DIV_ROUND_UP(limits->max_pll_multiplier, mul));
-	dev_dbg(dev, "more_mul_max: min_pll_multiplier check: %d\n",
-		more_mul_max);
-
-	/* Ensure we won't go below min_pll_op_freq_hz. */
-	more_mul_min = DIV_ROUND_UP(limits->min_pll_op_freq_hz,
-				    pll->ext_clk_freq_hz / pll->pre_pll_clk_div
-				    * mul);
-	dev_dbg(dev, "more_mul_min: min_pll_op_freq_hz check: %d\n",
-		more_mul_min);
-	/* Ensure we won't go below min_pll_multiplier. */
-	more_mul_min = max(more_mul_min,
-			   DIV_ROUND_UP(limits->min_pll_multiplier, mul));
-	dev_dbg(dev, "more_mul_min: min_pll_multiplier check: %d\n",
-		more_mul_min);
-
-	if (more_mul_min > more_mul_max) {
-		dev_warn(dev,
-			 "unable to compute more_mul_min and more_mul_max");
-		return -EINVAL;
-	}
-
-	more_mul_factor = lcm(div, pll->pre_pll_clk_div) / div;
-	dev_dbg(dev, "more_mul_factor: %d\n", more_mul_factor);
-	more_mul_factor = lcm(more_mul_factor, limits->min_op_sys_clk_div);
-	dev_dbg(dev, "more_mul_factor: min_op_sys_clk_div: %d\n",
-		more_mul_factor);
-	i = roundup(more_mul_min, more_mul_factor);
-	if (!is_one_or_even(i))
-		i <<= 1;
-
-	dev_dbg(dev, "final more_mul: %d\n", i);
-	if (i > more_mul_max) {
-		dev_warn(dev, "final more_mul is bad, max %d", more_mul_max);
-		return -EINVAL;
-	}
-
-	pll->pll_multiplier = mul * i;
-	pll->op_sys_clk_div = div * i / pll->pre_pll_clk_div;
-	dev_dbg(dev, "op_sys_clk_div: %d\n", pll->op_sys_clk_div);
-
-	pll->pll_ip_clk_freq_hz = pll->ext_clk_freq_hz
-		/ pll->pre_pll_clk_div;
-
-	pll->pll_op_clk_freq_hz = pll->pll_ip_clk_freq_hz
-		* pll->pll_multiplier;
-
-	/* Derive pll_op_clk_freq_hz. */
-	pll->op_sys_clk_freq_hz =
-		pll->pll_op_clk_freq_hz / pll->op_sys_clk_div;
-
-	pll->op_pix_clk_div = pll->bits_per_pixel;
-	dev_dbg(dev, "op_pix_clk_div: %d\n", pll->op_pix_clk_div);
-
-	pll->op_pix_clk_freq_hz =
-		pll->op_sys_clk_freq_hz / pll->op_pix_clk_div;
-
-	/*
-	 * Some sensors perform analogue binning and some do this
-	 * digitally. The ones doing this digitally can be roughly be
-	 * found out using this formula. The ones doing this digitally
-	 * should run at higher clock rate, so smaller divisor is used
-	 * on video timing side.
-	 */
-	if (limits->min_line_length_pck_bin > limits->min_line_length_pck
-	    / pll->binning_horizontal)
-		vt_op_binning_div = pll->binning_horizontal;
-	else
-		vt_op_binning_div = 1;
-	dev_dbg(dev, "vt_op_binning_div: %d\n", vt_op_binning_div);
-
-	/*
-	 * Profile 2 supports vt_pix_clk_div E [4, 10]
-	 *
-	 * Horizontal binning can be used as a base for difference in
-	 * divisors. One must make sure that horizontal blanking is
-	 * enough to accommodate the CSI-2 sync codes.
-	 *
-	 * Take scaling factor into account as well.
-	 *
-	 * Find absolute limits for the factor of vt divider.
-	 */
-	dev_dbg(dev, "scale_m: %d\n", pll->scale_m);
-	min_vt_div = DIV_ROUND_UP(pll->op_pix_clk_div * pll->op_sys_clk_div
-				  * pll->scale_n,
-				  lane_op_clock_ratio * vt_op_binning_div
-				  * pll->scale_m);
-
-	/* Find smallest and biggest allowed vt divisor. */
-	dev_dbg(dev, "min_vt_div: %d\n", min_vt_div);
-	min_vt_div = max(min_vt_div,
-			 DIV_ROUND_UP(pll->pll_op_clk_freq_hz,
-				      limits->max_vt_pix_clk_freq_hz));
-	dev_dbg(dev, "min_vt_div: max_vt_pix_clk_freq_hz: %d\n",
-		min_vt_div);
-	min_vt_div = max_t(uint32_t, min_vt_div,
-			   limits->min_vt_pix_clk_div
-			   * limits->min_vt_sys_clk_div);
-	dev_dbg(dev, "min_vt_div: min_vt_clk_div: %d\n", min_vt_div);
-
-	max_vt_div = limits->max_vt_sys_clk_div * limits->max_vt_pix_clk_div;
-	dev_dbg(dev, "max_vt_div: %d\n", max_vt_div);
-	max_vt_div = min(max_vt_div,
-			 DIV_ROUND_UP(pll->pll_op_clk_freq_hz,
-				      limits->min_vt_pix_clk_freq_hz));
-	dev_dbg(dev, "max_vt_div: min_vt_pix_clk_freq_hz: %d\n",
-		max_vt_div);
-
-	/*
-	 * Find limitsits for sys_clk_div. Not all values are possible
-	 * with all values of pix_clk_div.
-	 */
-	min_sys_div = limits->min_vt_sys_clk_div;
-	dev_dbg(dev, "min_sys_div: %d\n", min_sys_div);
-	min_sys_div = max(min_sys_div,
-			  DIV_ROUND_UP(min_vt_div,
-				       limits->max_vt_pix_clk_div));
-	dev_dbg(dev, "min_sys_div: max_vt_pix_clk_div: %d\n", min_sys_div);
-	min_sys_div = max(min_sys_div,
-			  pll->pll_op_clk_freq_hz
-			  / limits->max_vt_sys_clk_freq_hz);
-	dev_dbg(dev, "min_sys_div: max_pll_op_clk_freq_hz: %d\n", min_sys_div);
-	min_sys_div = clk_div_even_up(min_sys_div);
-	dev_dbg(dev, "min_sys_div: one or even: %d\n", min_sys_div);
-
-	max_sys_div = limits->max_vt_sys_clk_div;
-	dev_dbg(dev, "max_sys_div: %d\n", max_sys_div);
-	max_sys_div = min(max_sys_div,
-			  DIV_ROUND_UP(max_vt_div,
-				       limits->min_vt_pix_clk_div));
-	dev_dbg(dev, "max_sys_div: min_vt_pix_clk_div: %d\n", max_sys_div);
-	max_sys_div = min(max_sys_div,
-			  DIV_ROUND_UP(pll->pll_op_clk_freq_hz,
-				       limits->min_vt_pix_clk_freq_hz));
-	dev_dbg(dev, "max_sys_div: min_vt_pix_clk_freq_hz: %d\n", max_sys_div);
-
-	/*
-	 * Find pix_div such that a legal pix_div * sys_div results
-	 * into a value which is not smaller than div, the desired
-	 * divisor.
-	 */
-	for (vt_div = min_vt_div; vt_div <= max_vt_div;
-	     vt_div += 2 - (vt_div & 1)) {
-		for (sys_div = min_sys_div;
-		     sys_div <= max_sys_div;
-		     sys_div += 2 - (sys_div & 1)) {
-			int pix_div = DIV_ROUND_UP(vt_div, sys_div);
-
-			if (pix_div < limits->min_vt_pix_clk_div
-			    || pix_div > limits->max_vt_pix_clk_div) {
-				dev_dbg(dev,
-					"pix_div %d too small or too big (%d--%d)\n",
-					pix_div,
-					limits->min_vt_pix_clk_div,
-					limits->max_vt_pix_clk_div);
-				continue;
-			}
-
-			/* Check if this one is better. */
-			if (pix_div * sys_div
-			    <= roundup(min_vt_div, best_pix_div))
-				best_pix_div = pix_div;
-		}
-		if (best_pix_div < INT_MAX >> 1)
-			break;
-	}
-
-	pll->vt_sys_clk_div = DIV_ROUND_UP(min_vt_div, best_pix_div);
-	pll->vt_pix_clk_div = best_pix_div;
-
-	pll->vt_sys_clk_freq_hz =
-		pll->pll_op_clk_freq_hz / pll->vt_sys_clk_div;
-	pll->vt_pix_clk_freq_hz =
-		pll->vt_sys_clk_freq_hz / pll->vt_pix_clk_div;
-
-	pll->pixel_rate_csi =
-		pll->op_pix_clk_freq_hz * lane_op_clock_ratio;
-
-	print_pll(dev, pll);
-
-	rval = bounds_check(dev, pll->pre_pll_clk_div,
-			    limits->min_pre_pll_clk_div,
-			    limits->max_pre_pll_clk_div, "pre_pll_clk_div");
-	if (!rval)
-		rval = bounds_check(
-			dev, pll->pll_ip_clk_freq_hz,
-			limits->min_pll_ip_freq_hz, limits->max_pll_ip_freq_hz,
-			"pll_ip_clk_freq_hz");
-	if (!rval)
-		rval = bounds_check(
-			dev, pll->pll_multiplier,
-			limits->min_pll_multiplier, limits->max_pll_multiplier,
-			"pll_multiplier");
-	if (!rval)
-		rval = bounds_check(
-			dev, pll->pll_op_clk_freq_hz,
-			limits->min_pll_op_freq_hz, limits->max_pll_op_freq_hz,
-			"pll_op_clk_freq_hz");
-	if (!rval)
-		rval = bounds_check(
-			dev, pll->op_sys_clk_div,
-			limits->min_op_sys_clk_div, limits->max_op_sys_clk_div,
-			"op_sys_clk_div");
-	if (!rval)
-		rval = bounds_check(
-			dev, pll->op_pix_clk_div,
-			limits->min_op_pix_clk_div, limits->max_op_pix_clk_div,
-			"op_pix_clk_div");
-	if (!rval)
-		rval = bounds_check(
-			dev, pll->op_sys_clk_freq_hz,
-			limits->min_op_sys_clk_freq_hz,
-			limits->max_op_sys_clk_freq_hz,
-			"op_sys_clk_freq_hz");
-	if (!rval)
-		rval = bounds_check(
-			dev, pll->op_pix_clk_freq_hz,
-			limits->min_op_pix_clk_freq_hz,
-			limits->max_op_pix_clk_freq_hz,
-			"op_pix_clk_freq_hz");
-	if (!rval)
-		rval = bounds_check(
-			dev, pll->vt_sys_clk_freq_hz,
-			limits->min_vt_sys_clk_freq_hz,
-			limits->max_vt_sys_clk_freq_hz,
-			"vt_sys_clk_freq_hz");
-	if (!rval)
-		rval = bounds_check(
-			dev, pll->vt_pix_clk_freq_hz,
-			limits->min_vt_pix_clk_freq_hz,
-			limits->max_vt_pix_clk_freq_hz,
-			"vt_pix_clk_freq_hz");
-
-	return rval;
-}
-EXPORT_SYMBOL_GPL(smiapp_pll_calculate);
-
-MODULE_AUTHOR("Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>");
-MODULE_DESCRIPTION("Generic SMIA/SMIA++ PLL calculator");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/smiapp-pll.h b/drivers/media/video/smiapp-pll.h
deleted file mode 100644
index 9eab63f..0000000
--- a/drivers/media/video/smiapp-pll.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * drivers/media/video/smiapp-pll.h
- *
- * Generic driver for SMIA/SMIA++ compliant camera modules
- *
- * Copyright (C) 2012 Nokia Corporation
- * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef SMIAPP_PLL_H
-#define SMIAPP_PLL_H
-
-#include <linux/device.h>
-
-struct smiapp_pll {
-	uint8_t lanes;
-	uint8_t binning_horizontal;
-	uint8_t binning_vertical;
-	uint8_t scale_m;
-	uint8_t scale_n;
-	uint8_t bits_per_pixel;
-	uint16_t flags;
-	uint32_t link_freq;
-
-	uint16_t pre_pll_clk_div;
-	uint16_t pll_multiplier;
-	uint16_t op_sys_clk_div;
-	uint16_t op_pix_clk_div;
-	uint16_t vt_sys_clk_div;
-	uint16_t vt_pix_clk_div;
-
-	uint32_t ext_clk_freq_hz;
-	uint32_t pll_ip_clk_freq_hz;
-	uint32_t pll_op_clk_freq_hz;
-	uint32_t op_sys_clk_freq_hz;
-	uint32_t op_pix_clk_freq_hz;
-	uint32_t vt_sys_clk_freq_hz;
-	uint32_t vt_pix_clk_freq_hz;
-
-	uint32_t pixel_rate_csi;
-};
-
-struct smiapp_pll_limits {
-	/* Strict PLL limits */
-	uint32_t min_ext_clk_freq_hz;
-	uint32_t max_ext_clk_freq_hz;
-	uint16_t min_pre_pll_clk_div;
-	uint16_t max_pre_pll_clk_div;
-	uint32_t min_pll_ip_freq_hz;
-	uint32_t max_pll_ip_freq_hz;
-	uint16_t min_pll_multiplier;
-	uint16_t max_pll_multiplier;
-	uint32_t min_pll_op_freq_hz;
-	uint32_t max_pll_op_freq_hz;
-
-	uint16_t min_vt_sys_clk_div;
-	uint16_t max_vt_sys_clk_div;
-	uint32_t min_vt_sys_clk_freq_hz;
-	uint32_t max_vt_sys_clk_freq_hz;
-	uint16_t min_vt_pix_clk_div;
-	uint16_t max_vt_pix_clk_div;
-	uint32_t min_vt_pix_clk_freq_hz;
-	uint32_t max_vt_pix_clk_freq_hz;
-
-	uint16_t min_op_sys_clk_div;
-	uint16_t max_op_sys_clk_div;
-	uint32_t min_op_sys_clk_freq_hz;
-	uint32_t max_op_sys_clk_freq_hz;
-	uint16_t min_op_pix_clk_div;
-	uint16_t max_op_pix_clk_div;
-	uint32_t min_op_pix_clk_freq_hz;
-	uint32_t max_op_pix_clk_freq_hz;
-
-	/* Other relevant limits */
-	uint32_t min_line_length_pck_bin;
-	uint32_t min_line_length_pck;
-};
-
-/* op pix clock is for all lanes in total normally */
-#define SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE			(1 << 0)
-#define SMIAPP_PLL_FLAG_NO_OP_CLOCKS				(1 << 1)
-
-struct device;
-
-int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
-			 struct smiapp_pll *pll);
-
-#endif /* SMIAPP_PLL_H */
diff --git a/drivers/media/video/smiapp/Kconfig b/drivers/media/video/smiapp/Kconfig
deleted file mode 100644
index 3149cda..0000000
--- a/drivers/media/video/smiapp/Kconfig
+++ /dev/null
@@ -1,7 +0,0 @@
-config VIDEO_SMIAPP
-	tristate "SMIA++/SMIA sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAVE_CLK
-	depends on MEDIA_CAMERA_SUPPORT
-	select VIDEO_SMIAPP_PLL
-	---help---
-	  This is a generic driver for SMIA++/SMIA camera modules.
diff --git a/drivers/media/video/smiapp/Makefile b/drivers/media/video/smiapp/Makefile
deleted file mode 100644
index 36b0cfa..0000000
--- a/drivers/media/video/smiapp/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-smiapp-objs			+= smiapp-core.o smiapp-regs.o \
-				   smiapp-quirk.o smiapp-limits.o
-obj-$(CONFIG_VIDEO_SMIAPP)	+= smiapp.o
-
-ccflags-y += -Idrivers/media/video
diff --git a/drivers/media/video/smiapp/smiapp-core.c b/drivers/media/video/smiapp/smiapp-core.c
deleted file mode 100644
index bfd47c1..0000000
--- a/drivers/media/video/smiapp/smiapp-core.c
+++ /dev/null
@@ -1,2895 +0,0 @@
-/*
- * drivers/media/video/smiapp/smiapp-core.c
- *
- * Generic driver for SMIA/SMIA++ compliant camera modules
- *
- * Copyright (C) 2010--2012 Nokia Corporation
- * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
- *
- * Based on smiapp driver by Vimarsh Zutshi
- * Based on jt8ev1.c by Vimarsh Zutshi
- * Based on smia-sensor.c by Tuukka Toivonen <tuukkat76@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/regulator/consumer.h>
-#include <linux/v4l2-mediabus.h>
-#include <media/v4l2-device.h>
-
-#include "smiapp.h"
-
-#define SMIAPP_ALIGN_DIM(dim, flags)	\
-	((flags) & V4L2_SEL_FLAG_GE	\
-	 ? ALIGN((dim), 2)		\
-	 : (dim) & ~1)
-
-/*
- * smiapp_module_idents - supported camera modules
- */
-static const struct smiapp_module_ident smiapp_module_idents[] = {
-	SMIAPP_IDENT_L(0x01, 0x022b, -1, "vs6555"),
-	SMIAPP_IDENT_L(0x01, 0x022e, -1, "vw6558"),
-	SMIAPP_IDENT_L(0x07, 0x7698, -1, "ovm7698"),
-	SMIAPP_IDENT_L(0x0b, 0x4242, -1, "smiapp-003"),
-	SMIAPP_IDENT_L(0x0c, 0x208a, -1, "tcm8330md"),
-	SMIAPP_IDENT_LQ(0x0c, 0x2134, -1, "tcm8500md", &smiapp_tcm8500md_quirk),
-	SMIAPP_IDENT_L(0x0c, 0x213e, -1, "et8en2"),
-	SMIAPP_IDENT_L(0x0c, 0x2184, -1, "tcm8580md"),
-	SMIAPP_IDENT_LQ(0x0c, 0x560f, -1, "jt8ew9", &smiapp_jt8ew9_quirk),
-	SMIAPP_IDENT_LQ(0x10, 0x4141, -1, "jt8ev1", &smiapp_jt8ev1_quirk),
-	SMIAPP_IDENT_LQ(0x10, 0x4241, -1, "imx125es", &smiapp_imx125es_quirk),
-};
-
-/*
- *
- * Dynamic Capability Identification
- *
- */
-
-static int smiapp_read_frame_fmt(struct smiapp_sensor *sensor)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
-	u32 fmt_model_type, fmt_model_subtype, ncol_desc, nrow_desc;
-	unsigned int i;
-	int rval;
-	int line_count = 0;
-	int embedded_start = -1, embedded_end = -1;
-	int image_start = 0;
-
-	rval = smiapp_read(sensor, SMIAPP_REG_U8_FRAME_FORMAT_MODEL_TYPE,
-			   &fmt_model_type);
-	if (rval)
-		return rval;
-
-	rval = smiapp_read(sensor, SMIAPP_REG_U8_FRAME_FORMAT_MODEL_SUBTYPE,
-			   &fmt_model_subtype);
-	if (rval)
-		return rval;
-
-	ncol_desc = (fmt_model_subtype
-		     & SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_MASK)
-		>> SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_SHIFT;
-	nrow_desc = fmt_model_subtype
-		& SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NROWS_MASK;
-
-	dev_dbg(&client->dev, "format_model_type %s\n",
-		fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE
-		? "2 byte" :
-		fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE
-		? "4 byte" : "is simply bad");
-
-	for (i = 0; i < ncol_desc + nrow_desc; i++) {
-		u32 desc;
-		u32 pixelcode;
-		u32 pixels;
-		char *which;
-		char *what;
-
-		if (fmt_model_type == SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE) {
-			rval = smiapp_read(
-				sensor,
-				SMIAPP_REG_U16_FRAME_FORMAT_DESCRIPTOR_2(i),
-				&desc);
-			if (rval)
-				return rval;
-
-			pixelcode =
-				(desc
-				 & SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_MASK)
-				>> SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_SHIFT;
-			pixels = desc & SMIAPP_FRAME_FORMAT_DESC_2_PIXELS_MASK;
-		} else if (fmt_model_type
-			   == SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE) {
-			rval = smiapp_read(
-				sensor,
-				SMIAPP_REG_U32_FRAME_FORMAT_DESCRIPTOR_4(i),
-				&desc);
-			if (rval)
-				return rval;
-
-			pixelcode =
-				(desc
-				 & SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_MASK)
-				>> SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_SHIFT;
-			pixels = desc & SMIAPP_FRAME_FORMAT_DESC_4_PIXELS_MASK;
-		} else {
-			dev_dbg(&client->dev,
-				"invalid frame format model type %d\n",
-				fmt_model_type);
-			return -EINVAL;
-		}
-
-		if (i < ncol_desc)
-			which = "columns";
-		else
-			which = "rows";
-
-		switch (pixelcode) {
-		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED:
-			what = "embedded";
-			break;
-		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DUMMY:
-			what = "dummy";
-			break;
-		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_BLACK:
-			what = "black";
-			break;
-		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DARK:
-			what = "dark";
-			break;
-		case SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE:
-			what = "visible";
-			break;
-		default:
-			what = "invalid";
-			dev_dbg(&client->dev, "pixelcode %d\n", pixelcode);
-			break;
-		}
-
-		dev_dbg(&client->dev, "%s pixels: %d %s\n",
-			what, pixels, which);
-
-		if (i < ncol_desc)
-			continue;
-
-		/* Handle row descriptors */
-		if (pixelcode
-		    == SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED) {
-			embedded_start = line_count;
-		} else {
-			if (pixelcode == SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE
-			    || pixels >= sensor->limits[SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES] / 2)
-				image_start = line_count;
-			if (embedded_start != -1 && embedded_end == -1)
-				embedded_end = line_count;
-		}
-		line_count += pixels;
-	}
-
-	if (embedded_start == -1 || embedded_end == -1) {
-		embedded_start = 0;
-		embedded_end = 0;
-	}
-
-	dev_dbg(&client->dev, "embedded data from lines %d to %d\n",
-		embedded_start, embedded_end);
-	dev_dbg(&client->dev, "image data starts at line %d\n", image_start);
-
-	return 0;
-}
-
-static int smiapp_pll_configure(struct smiapp_sensor *sensor)
-{
-	struct smiapp_pll *pll = &sensor->pll;
-	int rval;
-
-	rval = smiapp_write(
-		sensor, SMIAPP_REG_U16_VT_PIX_CLK_DIV, pll->vt_pix_clk_div);
-	if (rval < 0)
-		return rval;
-
-	rval = smiapp_write(
-		sensor, SMIAPP_REG_U16_VT_SYS_CLK_DIV, pll->vt_sys_clk_div);
-	if (rval < 0)
-		return rval;
-
-	rval = smiapp_write(
-		sensor, SMIAPP_REG_U16_PRE_PLL_CLK_DIV, pll->pre_pll_clk_div);
-	if (rval < 0)
-		return rval;
-
-	rval = smiapp_write(
-		sensor, SMIAPP_REG_U16_PLL_MULTIPLIER, pll->pll_multiplier);
-	if (rval < 0)
-		return rval;
-
-	/* Lane op clock ratio does not apply here. */
-	rval = smiapp_write(
-		sensor, SMIAPP_REG_U32_REQUESTED_LINK_BIT_RATE_MBPS,
-		DIV_ROUND_UP(pll->op_sys_clk_freq_hz, 1000000 / 256 / 256));
-	if (rval < 0 || sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0)
-		return rval;
-
-	rval = smiapp_write(
-		sensor, SMIAPP_REG_U16_OP_PIX_CLK_DIV, pll->op_pix_clk_div);
-	if (rval < 0)
-		return rval;
-
-	return smiapp_write(
-		sensor, SMIAPP_REG_U16_OP_SYS_CLK_DIV, pll->op_sys_clk_div);
-}
-
-static int smiapp_pll_update(struct smiapp_sensor *sensor)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
-	struct smiapp_pll_limits lim = {
-		.min_pre_pll_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_PRE_PLL_CLK_DIV],
-		.max_pre_pll_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_PRE_PLL_CLK_DIV],
-		.min_pll_ip_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ],
-		.max_pll_ip_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_PLL_IP_FREQ_HZ],
-		.min_pll_multiplier = sensor->limits[SMIAPP_LIMIT_MIN_PLL_MULTIPLIER],
-		.max_pll_multiplier = sensor->limits[SMIAPP_LIMIT_MAX_PLL_MULTIPLIER],
-		.min_pll_op_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_PLL_OP_FREQ_HZ],
-		.max_pll_op_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_PLL_OP_FREQ_HZ],
-
-		.min_op_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV],
-		.max_op_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV],
-		.min_op_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV],
-		.max_op_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV],
-		.min_op_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_FREQ_HZ],
-		.max_op_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_FREQ_HZ],
-		.min_op_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_FREQ_HZ],
-		.max_op_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_FREQ_HZ],
-
-		.min_vt_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_VT_SYS_CLK_DIV],
-		.max_vt_sys_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_VT_SYS_CLK_DIV],
-		.min_vt_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MIN_VT_PIX_CLK_DIV],
-		.max_vt_pix_clk_div = sensor->limits[SMIAPP_LIMIT_MAX_VT_PIX_CLK_DIV],
-		.min_vt_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_VT_SYS_CLK_FREQ_HZ],
-		.max_vt_sys_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_VT_SYS_CLK_FREQ_HZ],
-		.min_vt_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MIN_VT_PIX_CLK_FREQ_HZ],
-		.max_vt_pix_clk_freq_hz = sensor->limits[SMIAPP_LIMIT_MAX_VT_PIX_CLK_FREQ_HZ],
-
-		.min_line_length_pck_bin = sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN],
-		.min_line_length_pck = sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK],
-	};
-	struct smiapp_pll *pll = &sensor->pll;
-	int rval;
-
-	memset(&sensor->pll, 0, sizeof(sensor->pll));
-
-	pll->lanes = sensor->platform_data->lanes;
-	pll->ext_clk_freq_hz = sensor->platform_data->ext_clk;
-
-	if (sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0) {
-		/*
-		 * Fill in operational clock divisors limits from the
-		 * video timing ones. On profile 0 sensors the
-		 * requirements regarding them are essentially the
-		 * same as on VT ones.
-		 */
-		lim.min_op_sys_clk_div = lim.min_vt_sys_clk_div;
-		lim.max_op_sys_clk_div = lim.max_vt_sys_clk_div;
-		lim.min_op_pix_clk_div = lim.min_vt_pix_clk_div;
-		lim.max_op_pix_clk_div = lim.max_vt_pix_clk_div;
-		lim.min_op_sys_clk_freq_hz = lim.min_vt_sys_clk_freq_hz;
-		lim.max_op_sys_clk_freq_hz = lim.max_vt_sys_clk_freq_hz;
-		lim.min_op_pix_clk_freq_hz = lim.min_vt_pix_clk_freq_hz;
-		lim.max_op_pix_clk_freq_hz = lim.max_vt_pix_clk_freq_hz;
-		/* Profile 0 sensors have no separate OP clock branch. */
-		pll->flags |= SMIAPP_PLL_FLAG_NO_OP_CLOCKS;
-	}
-
-	if (smiapp_needs_quirk(sensor,
-			       SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE))
-		pll->flags |= SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE;
-
-	pll->binning_horizontal = sensor->binning_horizontal;
-	pll->binning_vertical = sensor->binning_vertical;
-	pll->link_freq =
-		sensor->link_freq->qmenu_int[sensor->link_freq->val];
-	pll->scale_m = sensor->scale_m;
-	pll->scale_n = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN];
-	pll->bits_per_pixel = sensor->csi_format->compressed;
-
-	rval = smiapp_pll_calculate(&client->dev, &lim, pll);
-	if (rval < 0)
-		return rval;
-
-	sensor->pixel_rate_parray->cur.val64 = pll->vt_pix_clk_freq_hz;
-	sensor->pixel_rate_csi->cur.val64 = pll->pixel_rate_csi;
-
-	return 0;
-}
-
-
-/*
- *
- * V4L2 Controls handling
- *
- */
-
-static void __smiapp_update_exposure_limits(struct smiapp_sensor *sensor)
-{
-	struct v4l2_ctrl *ctrl = sensor->exposure;
-	int max;
-
-	max = sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height
-		+ sensor->vblank->val
-		- sensor->limits[SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MAX_MARGIN];
-
-	ctrl->maximum = max;
-	if (ctrl->default_value > max)
-		ctrl->default_value = max;
-	if (ctrl->val > max)
-		ctrl->val = max;
-	if (ctrl->cur.val > max)
-		ctrl->cur.val = max;
-}
-
-/*
- * Order matters.
- *
- * 1. Bits-per-pixel, descending.
- * 2. Bits-per-pixel compressed, descending.
- * 3. Pixel order, same as in pixel_order_str. Formats for all four pixel
- *    orders must be defined.
- */
-static const struct smiapp_csi_data_format smiapp_csi_data_formats[] = {
-	{ V4L2_MBUS_FMT_SGRBG12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_GRBG, },
-	{ V4L2_MBUS_FMT_SRGGB12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_RGGB, },
-	{ V4L2_MBUS_FMT_SBGGR12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_BGGR, },
-	{ V4L2_MBUS_FMT_SGBRG12_1X12, 12, 12, SMIAPP_PIXEL_ORDER_GBRG, },
-	{ V4L2_MBUS_FMT_SGRBG10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_GRBG, },
-	{ V4L2_MBUS_FMT_SRGGB10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_RGGB, },
-	{ V4L2_MBUS_FMT_SBGGR10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_BGGR, },
-	{ V4L2_MBUS_FMT_SGBRG10_1X10, 10, 10, SMIAPP_PIXEL_ORDER_GBRG, },
-	{ V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_GRBG, },
-	{ V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_RGGB, },
-	{ V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_BGGR, },
-	{ V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8, 10, 8, SMIAPP_PIXEL_ORDER_GBRG, },
-	{ V4L2_MBUS_FMT_SGRBG8_1X8, 8, 8, SMIAPP_PIXEL_ORDER_GRBG, },
-	{ V4L2_MBUS_FMT_SRGGB8_1X8, 8, 8, SMIAPP_PIXEL_ORDER_RGGB, },
-	{ V4L2_MBUS_FMT_SBGGR8_1X8, 8, 8, SMIAPP_PIXEL_ORDER_BGGR, },
-	{ V4L2_MBUS_FMT_SGBRG8_1X8, 8, 8, SMIAPP_PIXEL_ORDER_GBRG, },
-};
-
-const char *pixel_order_str[] = { "GRBG", "RGGB", "BGGR", "GBRG" };
-
-#define to_csi_format_idx(fmt) (((unsigned long)(fmt)			\
-				 - (unsigned long)smiapp_csi_data_formats) \
-				/ sizeof(*smiapp_csi_data_formats))
-
-static u32 smiapp_pixel_order(struct smiapp_sensor *sensor)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
-	int flip = 0;
-
-	if (sensor->hflip) {
-		if (sensor->hflip->val)
-			flip |= SMIAPP_IMAGE_ORIENTATION_HFLIP;
-
-		if (sensor->vflip->val)
-			flip |= SMIAPP_IMAGE_ORIENTATION_VFLIP;
-	}
-
-	flip ^= sensor->hvflip_inv_mask;
-
-	dev_dbg(&client->dev, "flip %d\n", flip);
-	return sensor->default_pixel_order ^ flip;
-}
-
-static void smiapp_update_mbus_formats(struct smiapp_sensor *sensor)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
-	unsigned int csi_format_idx =
-		to_csi_format_idx(sensor->csi_format) & ~3;
-	unsigned int internal_csi_format_idx =
-		to_csi_format_idx(sensor->internal_csi_format) & ~3;
-	unsigned int pixel_order = smiapp_pixel_order(sensor);
-
-	sensor->mbus_frame_fmts =
-		sensor->default_mbus_frame_fmts << pixel_order;
-	sensor->csi_format =
-		&smiapp_csi_data_formats[csi_format_idx + pixel_order];
-	sensor->internal_csi_format =
-		&smiapp_csi_data_formats[internal_csi_format_idx
-					 + pixel_order];
-
-	BUG_ON(max(internal_csi_format_idx, csi_format_idx) + pixel_order
-	       >= ARRAY_SIZE(smiapp_csi_data_formats));
-	BUG_ON(min(internal_csi_format_idx, csi_format_idx) < 0);
-
-	dev_dbg(&client->dev, "new pixel order %s\n",
-		pixel_order_str[pixel_order]);
-}
-
-static int smiapp_set_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct smiapp_sensor *sensor =
-		container_of(ctrl->handler, struct smiapp_subdev, ctrl_handler)
-			->sensor;
-	u32 orient = 0;
-	int exposure;
-	int rval;
-
-	switch (ctrl->id) {
-	case V4L2_CID_ANALOGUE_GAIN:
-		return smiapp_write(
-			sensor,
-			SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GLOBAL, ctrl->val);
-
-	case V4L2_CID_EXPOSURE:
-		return smiapp_write(
-			sensor,
-			SMIAPP_REG_U16_COARSE_INTEGRATION_TIME, ctrl->val);
-
-	case V4L2_CID_HFLIP:
-	case V4L2_CID_VFLIP:
-		if (sensor->streaming)
-			return -EBUSY;
-
-		if (sensor->hflip->val)
-			orient |= SMIAPP_IMAGE_ORIENTATION_HFLIP;
-
-		if (sensor->vflip->val)
-			orient |= SMIAPP_IMAGE_ORIENTATION_VFLIP;
-
-		orient ^= sensor->hvflip_inv_mask;
-		rval = smiapp_write(sensor,
-				    SMIAPP_REG_U8_IMAGE_ORIENTATION,
-				    orient);
-		if (rval < 0)
-			return rval;
-
-		smiapp_update_mbus_formats(sensor);
-
-		return 0;
-
-	case V4L2_CID_VBLANK:
-		exposure = sensor->exposure->val;
-
-		__smiapp_update_exposure_limits(sensor);
-
-		if (exposure > sensor->exposure->maximum) {
-			sensor->exposure->val =
-				sensor->exposure->maximum;
-			rval = smiapp_set_ctrl(
-				sensor->exposure);
-			if (rval < 0)
-				return rval;
-		}
-
-		return smiapp_write(
-			sensor, SMIAPP_REG_U16_FRAME_LENGTH_LINES,
-			sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height
-			+ ctrl->val);
-
-	case V4L2_CID_HBLANK:
-		return smiapp_write(
-			sensor, SMIAPP_REG_U16_LINE_LENGTH_PCK,
-			sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width
-			+ ctrl->val);
-
-	case V4L2_CID_LINK_FREQ:
-		if (sensor->streaming)
-			return -EBUSY;
-
-		return smiapp_pll_update(sensor);
-
-	default:
-		return -EINVAL;
-	}
-}
-
-static const struct v4l2_ctrl_ops smiapp_ctrl_ops = {
-	.s_ctrl = smiapp_set_ctrl,
-};
-
-static int smiapp_init_controls(struct smiapp_sensor *sensor)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
-	unsigned int max;
-	int rval;
-
-	rval = v4l2_ctrl_handler_init(&sensor->pixel_array->ctrl_handler, 7);
-	if (rval)
-		return rval;
-	sensor->pixel_array->ctrl_handler.lock = &sensor->mutex;
-
-	sensor->analog_gain = v4l2_ctrl_new_std(
-		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
-		V4L2_CID_ANALOGUE_GAIN,
-		sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN],
-		sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX],
-		max(sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_STEP], 1U),
-		sensor->limits[SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN]);
-
-	/* Exposure limits will be updated soon, use just something here. */
-	sensor->exposure = v4l2_ctrl_new_std(
-		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
-		V4L2_CID_EXPOSURE, 0, 0, 1, 0);
-
-	sensor->hflip = v4l2_ctrl_new_std(
-		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
-		V4L2_CID_HFLIP, 0, 1, 1, 0);
-	sensor->vflip = v4l2_ctrl_new_std(
-		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
-		V4L2_CID_VFLIP, 0, 1, 1, 0);
-
-	sensor->vblank = v4l2_ctrl_new_std(
-		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
-		V4L2_CID_VBLANK, 0, 1, 1, 0);
-
-	if (sensor->vblank)
-		sensor->vblank->flags |= V4L2_CTRL_FLAG_UPDATE;
-
-	sensor->hblank = v4l2_ctrl_new_std(
-		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
-		V4L2_CID_HBLANK, 0, 1, 1, 0);
-
-	if (sensor->hblank)
-		sensor->hblank->flags |= V4L2_CTRL_FLAG_UPDATE;
-
-	sensor->pixel_rate_parray = v4l2_ctrl_new_std(
-		&sensor->pixel_array->ctrl_handler, &smiapp_ctrl_ops,
-		V4L2_CID_PIXEL_RATE, 0, 0, 1, 0);
-
-	if (sensor->pixel_array->ctrl_handler.error) {
-		dev_err(&client->dev,
-			"pixel array controls initialization failed (%d)\n",
-			sensor->pixel_array->ctrl_handler.error);
-		rval = sensor->pixel_array->ctrl_handler.error;
-		goto error;
-	}
-
-	sensor->pixel_array->sd.ctrl_handler =
-		&sensor->pixel_array->ctrl_handler;
-
-	v4l2_ctrl_cluster(2, &sensor->hflip);
-
-	rval = v4l2_ctrl_handler_init(&sensor->src->ctrl_handler, 0);
-	if (rval)
-		goto error;
-	sensor->src->ctrl_handler.lock = &sensor->mutex;
-
-	for (max = 0; sensor->platform_data->op_sys_clock[max + 1]; max++);
-
-	sensor->link_freq = v4l2_ctrl_new_int_menu(
-		&sensor->src->ctrl_handler, &smiapp_ctrl_ops,
-		V4L2_CID_LINK_FREQ, max, 0,
-		sensor->platform_data->op_sys_clock);
-
-	sensor->pixel_rate_csi = v4l2_ctrl_new_std(
-		&sensor->src->ctrl_handler, &smiapp_ctrl_ops,
-		V4L2_CID_PIXEL_RATE, 0, 0, 1, 0);
-
-	if (sensor->src->ctrl_handler.error) {
-		dev_err(&client->dev,
-			"src controls initialization failed (%d)\n",
-			sensor->src->ctrl_handler.error);
-		rval = sensor->src->ctrl_handler.error;
-		goto error;
-	}
-
-	sensor->src->sd.ctrl_handler =
-		&sensor->src->ctrl_handler;
-
-	return 0;
-
-error:
-	v4l2_ctrl_handler_free(&sensor->pixel_array->ctrl_handler);
-	v4l2_ctrl_handler_free(&sensor->src->ctrl_handler);
-
-	return rval;
-}
-
-static void smiapp_free_controls(struct smiapp_sensor *sensor)
-{
-	unsigned int i;
-
-	for (i = 0; i < sensor->ssds_used; i++)
-		v4l2_ctrl_handler_free(&sensor->ssds[i].ctrl_handler);
-}
-
-static int smiapp_get_limits(struct smiapp_sensor *sensor, int const *limit,
-			     unsigned int n)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
-	unsigned int i;
-	u32 val;
-	int rval;
-
-	for (i = 0; i < n; i++) {
-		rval = smiapp_read(
-			sensor, smiapp_reg_limits[limit[i]].addr, &val);
-		if (rval)
-			return rval;
-		sensor->limits[limit[i]] = val;
-		dev_dbg(&client->dev, "0x%8.8x \"%s\" = %d, 0x%x\n",
-			smiapp_reg_limits[limit[i]].addr,
-			smiapp_reg_limits[limit[i]].what, val, val);
-	}
-
-	return 0;
-}
-
-static int smiapp_get_all_limits(struct smiapp_sensor *sensor)
-{
-	unsigned int i;
-	int rval;
-
-	for (i = 0; i < SMIAPP_LIMIT_LAST; i++) {
-		rval = smiapp_get_limits(sensor, &i, 1);
-		if (rval < 0)
-			return rval;
-	}
-
-	if (sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] == 0)
-		smiapp_replace_limit(sensor, SMIAPP_LIMIT_SCALER_N_MIN, 16);
-
-	return 0;
-}
-
-static int smiapp_get_limits_binning(struct smiapp_sensor *sensor)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
-	static u32 const limits[] = {
-		SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN,
-		SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN,
-		SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN,
-		SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN,
-		SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN,
-		SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN_BIN,
-		SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN,
-	};
-	static u32 const limits_replace[] = {
-		SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES,
-		SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES,
-		SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK,
-		SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK,
-		SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK,
-		SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN,
-		SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN,
-	};
-	unsigned int i;
-	int rval;
-
-	if (sensor->limits[SMIAPP_LIMIT_BINNING_CAPABILITY] ==
-	    SMIAPP_BINNING_CAPABILITY_NO) {
-		for (i = 0; i < ARRAY_SIZE(limits); i++)
-			sensor->limits[limits[i]] =
-				sensor->limits[limits_replace[i]];
-
-		return 0;
-	}
-
-	rval = smiapp_get_limits(sensor, limits, ARRAY_SIZE(limits));
-	if (rval < 0)
-		return rval;
-
-	/*
-	 * Sanity check whether the binning limits are valid. If not,
-	 * use the non-binning ones.
-	 */
-	if (sensor->limits[SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN]
-	    && sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN]
-	    && sensor->limits[SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN])
-		return 0;
-
-	for (i = 0; i < ARRAY_SIZE(limits); i++) {
-		dev_dbg(&client->dev,
-			"replace limit 0x%8.8x \"%s\" = %d, 0x%x\n",
-			smiapp_reg_limits[limits[i]].addr,
-			smiapp_reg_limits[limits[i]].what,
-			sensor->limits[limits_replace[i]],
-			sensor->limits[limits_replace[i]]);
-		sensor->limits[limits[i]] =
-			sensor->limits[limits_replace[i]];
-	}
-
-	return 0;
-}
-
-static int smiapp_get_mbus_formats(struct smiapp_sensor *sensor)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
-	unsigned int type, n;
-	unsigned int i, pixel_order;
-	int rval;
-
-	rval = smiapp_read(
-		sensor, SMIAPP_REG_U8_DATA_FORMAT_MODEL_TYPE, &type);
-	if (rval)
-		return rval;
-
-	dev_dbg(&client->dev, "data_format_model_type %d\n", type);
-
-	rval = smiapp_read(sensor, SMIAPP_REG_U8_PIXEL_ORDER,
-			   &pixel_order);
-	if (rval)
-		return rval;
-
-	if (pixel_order >= ARRAY_SIZE(pixel_order_str)) {
-		dev_dbg(&client->dev, "bad pixel order %d\n", pixel_order);
-		return -EINVAL;
-	}
-
-	dev_dbg(&client->dev, "pixel order %d (%s)\n", pixel_order,
-		pixel_order_str[pixel_order]);
-
-	switch (type) {
-	case SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL:
-		n = SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL_N;
-		break;
-	case SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED:
-		n = SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED_N;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	sensor->default_pixel_order = pixel_order;
-	sensor->mbus_frame_fmts = 0;
-
-	for (i = 0; i < n; i++) {
-		unsigned int fmt, j;
-
-		rval = smiapp_read(
-			sensor,
-			SMIAPP_REG_U16_DATA_FORMAT_DESCRIPTOR(i), &fmt);
-		if (rval)
-			return rval;
-
-		dev_dbg(&client->dev, "bpp %d, compressed %d\n",
-			fmt >> 8, (u8)fmt);
-
-		for (j = 0; j < ARRAY_SIZE(smiapp_csi_data_formats); j++) {
-			const struct smiapp_csi_data_format *f =
-				&smiapp_csi_data_formats[j];
-
-			if (f->pixel_order != SMIAPP_PIXEL_ORDER_GRBG)
-				continue;
-
-			if (f->width != fmt >> 8 || f->compressed != (u8)fmt)
-				continue;
-
-			dev_dbg(&client->dev, "jolly good! %d\n", j);
-
-			sensor->default_mbus_frame_fmts |= 1 << j;
-			if (!sensor->csi_format) {
-				sensor->csi_format = f;
-				sensor->internal_csi_format = f;
-			}
-		}
-	}
-
-	if (!sensor->csi_format) {
-		dev_err(&client->dev, "no supported mbus code found\n");
-		return -EINVAL;
-	}
-
-	smiapp_update_mbus_formats(sensor);
-
-	return 0;
-}
-
-static void smiapp_update_blanking(struct smiapp_sensor *sensor)
-{
-	struct v4l2_ctrl *vblank = sensor->vblank;
-	struct v4l2_ctrl *hblank = sensor->hblank;
-
-	vblank->minimum =
-		max_t(int,
-		      sensor->limits[SMIAPP_LIMIT_MIN_FRAME_BLANKING_LINES],
-		      sensor->limits[SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN] -
-		      sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height);
-	vblank->maximum =
-		sensor->limits[SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN] -
-		sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height;
-
-	vblank->val = clamp_t(int, vblank->val,
-			      vblank->minimum, vblank->maximum);
-	vblank->default_value = vblank->minimum;
-	vblank->val = vblank->val;
-	vblank->cur.val = vblank->val;
-
-	hblank->minimum =
-		max_t(int,
-		      sensor->limits[SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN] -
-		      sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width,
-		      sensor->limits[SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN]);
-	hblank->maximum =
-		sensor->limits[SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN] -
-		sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width;
-
-	hblank->val = clamp_t(int, hblank->val,
-			      hblank->minimum, hblank->maximum);
-	hblank->default_value = hblank->minimum;
-	hblank->val = hblank->val;
-	hblank->cur.val = hblank->val;
-
-	__smiapp_update_exposure_limits(sensor);
-}
-
-static int smiapp_update_mode(struct smiapp_sensor *sensor)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
-	unsigned int binning_mode;
-	int rval;
-
-	dev_dbg(&client->dev, "frame size: %dx%d\n",
-		sensor->src->crop[SMIAPP_PAD_SRC].width,
-		sensor->src->crop[SMIAPP_PAD_SRC].height);
-	dev_dbg(&client->dev, "csi format width: %d\n",
-		sensor->csi_format->width);
-
-	/* Binning has to be set up here; it affects limits */
-	if (sensor->binning_horizontal == 1 &&
-	    sensor->binning_vertical == 1) {
-		binning_mode = 0;
-	} else {
-		u8 binning_type =
-			(sensor->binning_horizontal << 4)
-			| sensor->binning_vertical;
-
-		rval = smiapp_write(
-			sensor, SMIAPP_REG_U8_BINNING_TYPE, binning_type);
-		if (rval < 0)
-			return rval;
-
-		binning_mode = 1;
-	}
-	rval = smiapp_write(sensor, SMIAPP_REG_U8_BINNING_MODE, binning_mode);
-	if (rval < 0)
-		return rval;
-
-	/* Get updated limits due to binning */
-	rval = smiapp_get_limits_binning(sensor);
-	if (rval < 0)
-		return rval;
-
-	rval = smiapp_pll_update(sensor);
-	if (rval < 0)
-		return rval;
-
-	/* Output from pixel array, including blanking */
-	smiapp_update_blanking(sensor);
-
-	dev_dbg(&client->dev, "vblank\t\t%d\n", sensor->vblank->val);
-	dev_dbg(&client->dev, "hblank\t\t%d\n", sensor->hblank->val);
-
-	dev_dbg(&client->dev, "real timeperframe\t100/%d\n",
-		sensor->pll.vt_pix_clk_freq_hz /
-		((sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width
-		  + sensor->hblank->val) *
-		 (sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height
-		  + sensor->vblank->val) / 100));
-
-	return 0;
-}
-
-/*
- *
- * SMIA++ NVM handling
- *
- */
-static int smiapp_read_nvm(struct smiapp_sensor *sensor,
-			   unsigned char *nvm)
-{
-	u32 i, s, p, np, v;
-	int rval = 0, rval2;
-
-	np = sensor->nvm_size / SMIAPP_NVM_PAGE_SIZE;
-	for (p = 0; p < np; p++) {
-		rval = smiapp_write(
-			sensor,
-			SMIAPP_REG_U8_DATA_TRANSFER_IF_1_PAGE_SELECT, p);
-		if (rval)
-			goto out;
-
-		rval = smiapp_write(sensor,
-				    SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL,
-				    SMIAPP_DATA_TRANSFER_IF_1_CTRL_EN |
-				    SMIAPP_DATA_TRANSFER_IF_1_CTRL_RD_EN);
-		if (rval)
-			goto out;
-
-		for (i = 0; i < 1000; i++) {
-			rval = smiapp_read(
-				sensor,
-				SMIAPP_REG_U8_DATA_TRANSFER_IF_1_STATUS, &s);
-
-			if (rval)
-				goto out;
-
-			if (s & SMIAPP_DATA_TRANSFER_IF_1_STATUS_RD_READY)
-				break;
-
-			if (--i == 0) {
-				rval = -ETIMEDOUT;
-				goto out;
-			}
-
-		}
-
-		for (i = 0; i < SMIAPP_NVM_PAGE_SIZE; i++) {
-			rval = smiapp_read(
-				sensor,
-				SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_0 + i,
-				&v);
-			if (rval)
-				goto out;
-
-			*nvm++ = v;
-		}
-	}
-
-out:
-	rval2 = smiapp_write(sensor, SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL, 0);
-	if (rval < 0)
-		return rval;
-	else
-		return rval2;
-}
-
-/*
- *
- * SMIA++ CCI address control
- *
- */
-static int smiapp_change_cci_addr(struct smiapp_sensor *sensor)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
-	int rval;
-	u32 val;
-
-	client->addr = sensor->platform_data->i2c_addr_dfl;
-
-	rval = smiapp_write(sensor,
-			    SMIAPP_REG_U8_CCI_ADDRESS_CONTROL,
-			    sensor->platform_data->i2c_addr_alt << 1);
-	if (rval)
-		return rval;
-
-	client->addr = sensor->platform_data->i2c_addr_alt;
-
-	/* verify addr change went ok */
-	rval = smiapp_read(sensor, SMIAPP_REG_U8_CCI_ADDRESS_CONTROL, &val);
-	if (rval)
-		return rval;
-
-	if (val != sensor->platform_data->i2c_addr_alt << 1)
-		return -ENODEV;
-
-	return 0;
-}
-
-/*
- *
- * SMIA++ Mode Control
- *
- */
-static int smiapp_setup_flash_strobe(struct smiapp_sensor *sensor)
-{
-	struct smiapp_flash_strobe_parms *strobe_setup;
-	unsigned int ext_freq = sensor->platform_data->ext_clk;
-	u32 tmp;
-	u32 strobe_adjustment;
-	u32 strobe_width_high_rs;
-	int rval;
-
-	strobe_setup = sensor->platform_data->strobe_setup;
-
-	/*
-	 * How to calculate registers related to strobe length. Please
-	 * do not change, or if you do at least know what you're
-	 * doing. :-)
-	 *
-	 * Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> 2010-10-25
-	 *
-	 * flash_strobe_length [us] / 10^6 = (tFlash_strobe_width_ctrl
-	 *	/ EXTCLK freq [Hz]) * flash_strobe_adjustment
-	 *
-	 * tFlash_strobe_width_ctrl E N, [1 - 0xffff]
-	 * flash_strobe_adjustment E N, [1 - 0xff]
-	 *
-	 * The formula above is written as below to keep it on one
-	 * line:
-	 *
-	 * l / 10^6 = w / e * a
-	 *
-	 * Let's mark w * a by x:
-	 *
-	 * x = w * a
-	 *
-	 * Thus, we get:
-	 *
-	 * x = l * e / 10^6
-	 *
-	 * The strobe width must be at least as long as requested,
-	 * thus rounding upwards is needed.
-	 *
-	 * x = (l * e + 10^6 - 1) / 10^6
-	 * -----------------------------
-	 *
-	 * Maximum possible accuracy is wanted at all times. Thus keep
-	 * a as small as possible.
-	 *
-	 * Calculate a, assuming maximum w, with rounding upwards:
-	 *
-	 * a = (x + (2^16 - 1) - 1) / (2^16 - 1)
-	 * -------------------------------------
-	 *
-	 * Thus, we also get w, with that a, with rounding upwards:
-	 *
-	 * w = (x + a - 1) / a
-	 * -------------------
-	 *
-	 * To get limits:
-	 *
-	 * x E [1, (2^16 - 1) * (2^8 - 1)]
-	 *
-	 * Substituting maximum x to the original formula (with rounding),
-	 * the maximum l is thus
-	 *
-	 * (2^16 - 1) * (2^8 - 1) * 10^6 = l * e + 10^6 - 1
-	 *
-	 * l = (10^6 * (2^16 - 1) * (2^8 - 1) - 10^6 + 1) / e
-	 * --------------------------------------------------
-	 *
-	 * flash_strobe_length must be clamped between 1 and
-	 * (10^6 * (2^16 - 1) * (2^8 - 1) - 10^6 + 1) / EXTCLK freq.
-	 *
-	 * Then,
-	 *
-	 * flash_strobe_adjustment = ((flash_strobe_length *
-	 *	EXTCLK freq + 10^6 - 1) / 10^6 + (2^16 - 1) - 1) / (2^16 - 1)
-	 *
-	 * tFlash_strobe_width_ctrl = ((flash_strobe_length *
-	 *	EXTCLK freq + 10^6 - 1) / 10^6 +
-	 *	flash_strobe_adjustment - 1) / flash_strobe_adjustment
-	 */
-	tmp = div_u64(1000000ULL * ((1 << 16) - 1) * ((1 << 8) - 1) -
-		      1000000 + 1, ext_freq);
-	strobe_setup->strobe_width_high_us =
-		clamp_t(u32, strobe_setup->strobe_width_high_us, 1, tmp);
-
-	tmp = div_u64(((u64)strobe_setup->strobe_width_high_us * (u64)ext_freq +
-			1000000 - 1), 1000000ULL);
-	strobe_adjustment = (tmp + (1 << 16) - 1 - 1) / ((1 << 16) - 1);
-	strobe_width_high_rs = (tmp + strobe_adjustment - 1) /
-				strobe_adjustment;
-
-	rval = smiapp_write(sensor, SMIAPP_REG_U8_FLASH_MODE_RS,
-			    strobe_setup->mode);
-	if (rval < 0)
-		goto out;
-
-	rval = smiapp_write(sensor, SMIAPP_REG_U8_FLASH_STROBE_ADJUSTMENT,
-			    strobe_adjustment);
-	if (rval < 0)
-		goto out;
-
-	rval = smiapp_write(
-		sensor, SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_RS_CTRL,
-		strobe_width_high_rs);
-	if (rval < 0)
-		goto out;
-
-	rval = smiapp_write(sensor, SMIAPP_REG_U16_TFLASH_STROBE_DELAY_RS_CTRL,
-			    strobe_setup->strobe_delay);
-	if (rval < 0)
-		goto out;
-
-	rval = smiapp_write(sensor, SMIAPP_REG_U16_FLASH_STROBE_START_POINT,
-			    strobe_setup->stobe_start_point);
-	if (rval < 0)
-		goto out;
-
-	rval = smiapp_write(sensor, SMIAPP_REG_U8_FLASH_TRIGGER_RS,
-			    strobe_setup->trigger);
-
-out:
-	sensor->platform_data->strobe_setup->trigger = 0;
-
-	return rval;
-}
-
-/* -----------------------------------------------------------------------------
- * Power management
- */
-
-static int smiapp_power_on(struct smiapp_sensor *sensor)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
-	unsigned int sleep;
-	int rval;
-
-	rval = regulator_enable(sensor->vana);
-	if (rval) {
-		dev_err(&client->dev, "failed to enable vana regulator\n");
-		return rval;
-	}
-	usleep_range(1000, 1000);
-
-	if (sensor->platform_data->set_xclk)
-		rval = sensor->platform_data->set_xclk(
-			&sensor->src->sd, sensor->platform_data->ext_clk);
-	else
-		rval = clk_enable(sensor->ext_clk);
-	if (rval < 0) {
-		dev_dbg(&client->dev, "failed to set xclk\n");
-		goto out_xclk_fail;
-	}
-	usleep_range(1000, 1000);
-
-	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
-		gpio_set_value(sensor->platform_data->xshutdown, 1);
-
-	sleep = SMIAPP_RESET_DELAY(sensor->platform_data->ext_clk);
-	usleep_range(sleep, sleep);
-
-	/*
-	 * Failures to respond to the address change command have been noticed.
-	 * Those failures seem to be caused by the sensor requiring a longer
-	 * boot time than advertised. An additional 10ms delay seems to work
-	 * around the issue, but the SMIA++ I2C write retry hack makes the delay
-	 * unnecessary. The failures need to be investigated to find a proper
-	 * fix, and a delay will likely need to be added here if the I2C write
-	 * retry hack is reverted before the root cause of the boot time issue
-	 * is found.
-	 */
-
-	if (sensor->platform_data->i2c_addr_alt) {
-		rval = smiapp_change_cci_addr(sensor);
-		if (rval) {
-			dev_err(&client->dev, "cci address change error\n");
-			goto out_cci_addr_fail;
-		}
-	}
-
-	rval = smiapp_write(sensor, SMIAPP_REG_U8_SOFTWARE_RESET,
-			    SMIAPP_SOFTWARE_RESET);
-	if (rval < 0) {
-		dev_err(&client->dev, "software reset failed\n");
-		goto out_cci_addr_fail;
-	}
-
-	if (sensor->platform_data->i2c_addr_alt) {
-		rval = smiapp_change_cci_addr(sensor);
-		if (rval) {
-			dev_err(&client->dev, "cci address change error\n");
-			goto out_cci_addr_fail;
-		}
-	}
-
-	rval = smiapp_write(sensor, SMIAPP_REG_U16_COMPRESSION_MODE,
-			    SMIAPP_COMPRESSION_MODE_SIMPLE_PREDICTOR);
-	if (rval) {
-		dev_err(&client->dev, "compression mode set failed\n");
-		goto out_cci_addr_fail;
-	}
-
-	rval = smiapp_write(
-		sensor, SMIAPP_REG_U16_EXTCLK_FREQUENCY_MHZ,
-		sensor->platform_data->ext_clk / (1000000 / (1 << 8)));
-	if (rval) {
-		dev_err(&client->dev, "extclk frequency set failed\n");
-		goto out_cci_addr_fail;
-	}
-
-	rval = smiapp_write(sensor, SMIAPP_REG_U8_CSI_LANE_MODE,
-			    sensor->platform_data->lanes - 1);
-	if (rval) {
-		dev_err(&client->dev, "csi lane mode set failed\n");
-		goto out_cci_addr_fail;
-	}
-
-	rval = smiapp_write(sensor, SMIAPP_REG_U8_FAST_STANDBY_CTRL,
-			    SMIAPP_FAST_STANDBY_CTRL_IMMEDIATE);
-	if (rval) {
-		dev_err(&client->dev, "fast standby set failed\n");
-		goto out_cci_addr_fail;
-	}
-
-	rval = smiapp_write(sensor, SMIAPP_REG_U8_CSI_SIGNALLING_MODE,
-			    sensor->platform_data->csi_signalling_mode);
-	if (rval) {
-		dev_err(&client->dev, "csi signalling mode set failed\n");
-		goto out_cci_addr_fail;
-	}
-
-	/* DPHY control done by sensor based on requested link rate */
-	rval = smiapp_write(sensor, SMIAPP_REG_U8_DPHY_CTRL,
-			    SMIAPP_DPHY_CTRL_UI);
-	if (rval < 0)
-		return rval;
-
-	rval = smiapp_call_quirk(sensor, post_poweron);
-	if (rval) {
-		dev_err(&client->dev, "post_poweron quirks failed\n");
-		goto out_cci_addr_fail;
-	}
-
-	/* Are we still initialising...? If yes, return here. */
-	if (!sensor->pixel_array)
-		return 0;
-
-	rval = v4l2_ctrl_handler_setup(
-		&sensor->pixel_array->ctrl_handler);
-	if (rval)
-		goto out_cci_addr_fail;
-
-	rval = v4l2_ctrl_handler_setup(&sensor->src->ctrl_handler);
-	if (rval)
-		goto out_cci_addr_fail;
-
-	mutex_lock(&sensor->mutex);
-	rval = smiapp_update_mode(sensor);
-	mutex_unlock(&sensor->mutex);
-	if (rval < 0)
-		goto out_cci_addr_fail;
-
-	return 0;
-
-out_cci_addr_fail:
-	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
-		gpio_set_value(sensor->platform_data->xshutdown, 0);
-	if (sensor->platform_data->set_xclk)
-		sensor->platform_data->set_xclk(&sensor->src->sd, 0);
-	else
-		clk_disable(sensor->ext_clk);
-
-out_xclk_fail:
-	regulator_disable(sensor->vana);
-	return rval;
-}
-
-static void smiapp_power_off(struct smiapp_sensor *sensor)
-{
-	/*
-	 * Currently power/clock to lens are enable/disabled separately
-	 * but they are essentially the same signals. So if the sensor is
-	 * powered off while the lens is powered on the sensor does not
-	 * really see a power off and next time the cci address change
-	 * will fail. So do a soft reset explicitly here.
-	 */
-	if (sensor->platform_data->i2c_addr_alt)
-		smiapp_write(sensor,
-			     SMIAPP_REG_U8_SOFTWARE_RESET,
-			     SMIAPP_SOFTWARE_RESET);
-
-	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
-		gpio_set_value(sensor->platform_data->xshutdown, 0);
-	if (sensor->platform_data->set_xclk)
-		sensor->platform_data->set_xclk(&sensor->src->sd, 0);
-	else
-		clk_disable(sensor->ext_clk);
-	usleep_range(5000, 5000);
-	regulator_disable(sensor->vana);
-	sensor->streaming = 0;
-}
-
-static int smiapp_set_power(struct v4l2_subdev *subdev, int on)
-{
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-	int ret = 0;
-
-	mutex_lock(&sensor->power_mutex);
-
-	/*
-	 * If the power count is modified from 0 to != 0 or from != 0
-	 * to 0, update the power state.
-	 */
-	if (!sensor->power_count == !on)
-		goto out;
-
-	if (on) {
-		/* Power on and perform initialisation. */
-		ret = smiapp_power_on(sensor);
-		if (ret < 0)
-			goto out;
-	} else {
-		smiapp_power_off(sensor);
-	}
-
-	/* Update the power count. */
-	sensor->power_count += on ? 1 : -1;
-	WARN_ON(sensor->power_count < 0);
-
-out:
-	mutex_unlock(&sensor->power_mutex);
-	return ret;
-}
-
-/* -----------------------------------------------------------------------------
- * Video stream management
- */
-
-static int smiapp_start_streaming(struct smiapp_sensor *sensor)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
-	int rval;
-
-	mutex_lock(&sensor->mutex);
-
-	rval = smiapp_write(sensor, SMIAPP_REG_U16_CSI_DATA_FORMAT,
-			    (sensor->csi_format->width << 8) |
-			    sensor->csi_format->compressed);
-	if (rval)
-		goto out;
-
-	rval = smiapp_pll_configure(sensor);
-	if (rval)
-		goto out;
-
-	/* Analog crop start coordinates */
-	rval = smiapp_write(sensor, SMIAPP_REG_U16_X_ADDR_START,
-			    sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].left);
-	if (rval < 0)
-		goto out;
-
-	rval = smiapp_write(sensor, SMIAPP_REG_U16_Y_ADDR_START,
-			    sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].top);
-	if (rval < 0)
-		goto out;
-
-	/* Analog crop end coordinates */
-	rval = smiapp_write(
-		sensor, SMIAPP_REG_U16_X_ADDR_END,
-		sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].left
-		+ sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].width - 1);
-	if (rval < 0)
-		goto out;
-
-	rval = smiapp_write(
-		sensor, SMIAPP_REG_U16_Y_ADDR_END,
-		sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].top
-		+ sensor->pixel_array->crop[SMIAPP_PA_PAD_SRC].height - 1);
-	if (rval < 0)
-		goto out;
-
-	/*
-	 * Output from pixel array, including blanking, is set using
-	 * controls below. No need to set here.
-	 */
-
-	/* Digital crop */
-	if (sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY]
-	    == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) {
-		rval = smiapp_write(
-			sensor, SMIAPP_REG_U16_DIGITAL_CROP_X_OFFSET,
-			sensor->scaler->crop[SMIAPP_PAD_SINK].left);
-		if (rval < 0)
-			goto out;
-
-		rval = smiapp_write(
-			sensor, SMIAPP_REG_U16_DIGITAL_CROP_Y_OFFSET,
-			sensor->scaler->crop[SMIAPP_PAD_SINK].top);
-		if (rval < 0)
-			goto out;
-
-		rval = smiapp_write(
-			sensor, SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_WIDTH,
-			sensor->scaler->crop[SMIAPP_PAD_SINK].width);
-		if (rval < 0)
-			goto out;
-
-		rval = smiapp_write(
-			sensor, SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_HEIGHT,
-			sensor->scaler->crop[SMIAPP_PAD_SINK].height);
-		if (rval < 0)
-			goto out;
-	}
-
-	/* Scaling */
-	if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
-	    != SMIAPP_SCALING_CAPABILITY_NONE) {
-		rval = smiapp_write(sensor, SMIAPP_REG_U16_SCALING_MODE,
-				    sensor->scaling_mode);
-		if (rval < 0)
-			goto out;
-
-		rval = smiapp_write(sensor, SMIAPP_REG_U16_SCALE_M,
-				    sensor->scale_m);
-		if (rval < 0)
-			goto out;
-	}
-
-	/* Output size from sensor */
-	rval = smiapp_write(sensor, SMIAPP_REG_U16_X_OUTPUT_SIZE,
-			    sensor->src->crop[SMIAPP_PAD_SRC].width);
-	if (rval < 0)
-		goto out;
-	rval = smiapp_write(sensor, SMIAPP_REG_U16_Y_OUTPUT_SIZE,
-			    sensor->src->crop[SMIAPP_PAD_SRC].height);
-	if (rval < 0)
-		goto out;
-
-	if ((sensor->flash_capability &
-	     (SMIAPP_FLASH_MODE_CAPABILITY_SINGLE_STROBE |
-	      SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE)) &&
-	    sensor->platform_data->strobe_setup != NULL &&
-	    sensor->platform_data->strobe_setup->trigger != 0) {
-		rval = smiapp_setup_flash_strobe(sensor);
-		if (rval)
-			goto out;
-	}
-
-	rval = smiapp_call_quirk(sensor, pre_streamon);
-	if (rval) {
-		dev_err(&client->dev, "pre_streamon quirks failed\n");
-		goto out;
-	}
-
-	rval = smiapp_write(sensor, SMIAPP_REG_U8_MODE_SELECT,
-			    SMIAPP_MODE_SELECT_STREAMING);
-
-out:
-	mutex_unlock(&sensor->mutex);
-
-	return rval;
-}
-
-static int smiapp_stop_streaming(struct smiapp_sensor *sensor)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
-	int rval;
-
-	mutex_lock(&sensor->mutex);
-	rval = smiapp_write(sensor, SMIAPP_REG_U8_MODE_SELECT,
-			    SMIAPP_MODE_SELECT_SOFTWARE_STANDBY);
-	if (rval)
-		goto out;
-
-	rval = smiapp_call_quirk(sensor, post_streamoff);
-	if (rval)
-		dev_err(&client->dev, "post_streamoff quirks failed\n");
-
-out:
-	mutex_unlock(&sensor->mutex);
-	return rval;
-}
-
-/* -----------------------------------------------------------------------------
- * V4L2 subdev video operations
- */
-
-static int smiapp_set_stream(struct v4l2_subdev *subdev, int enable)
-{
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-	int rval;
-
-	if (sensor->streaming == enable)
-		return 0;
-
-	if (enable) {
-		sensor->streaming = 1;
-		rval = smiapp_start_streaming(sensor);
-		if (rval < 0)
-			sensor->streaming = 0;
-	} else {
-		rval = smiapp_stop_streaming(sensor);
-		sensor->streaming = 0;
-	}
-
-	return rval;
-}
-
-static int smiapp_enum_mbus_code(struct v4l2_subdev *subdev,
-				 struct v4l2_subdev_fh *fh,
-				 struct v4l2_subdev_mbus_code_enum *code)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(subdev);
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-	unsigned int i;
-	int idx = -1;
-	int rval = -EINVAL;
-
-	mutex_lock(&sensor->mutex);
-
-	dev_err(&client->dev, "subdev %s, pad %d, index %d\n",
-		subdev->name, code->pad, code->index);
-
-	if (subdev != &sensor->src->sd || code->pad != SMIAPP_PAD_SRC) {
-		if (code->index)
-			goto out;
-
-		code->code = sensor->internal_csi_format->code;
-		rval = 0;
-		goto out;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) {
-		if (sensor->mbus_frame_fmts & (1 << i))
-			idx++;
-
-		if (idx == code->index) {
-			code->code = smiapp_csi_data_formats[i].code;
-			dev_err(&client->dev, "found index %d, i %d, code %x\n",
-				code->index, i, code->code);
-			rval = 0;
-			break;
-		}
-	}
-
-out:
-	mutex_unlock(&sensor->mutex);
-
-	return rval;
-}
-
-static u32 __smiapp_get_mbus_code(struct v4l2_subdev *subdev,
-				  unsigned int pad)
-{
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-
-	if (subdev == &sensor->src->sd && pad == SMIAPP_PAD_SRC)
-		return sensor->csi_format->code;
-	else
-		return sensor->internal_csi_format->code;
-}
-
-static int __smiapp_get_format(struct v4l2_subdev *subdev,
-			       struct v4l2_subdev_fh *fh,
-			       struct v4l2_subdev_format *fmt)
-{
-	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
-
-	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
-		fmt->format = *v4l2_subdev_get_try_format(fh, fmt->pad);
-	} else {
-		struct v4l2_rect *r;
-
-		if (fmt->pad == ssd->source_pad)
-			r = &ssd->crop[ssd->source_pad];
-		else
-			r = &ssd->sink_fmt;
-
-		fmt->format.code = __smiapp_get_mbus_code(subdev, fmt->pad);
-		fmt->format.width = r->width;
-		fmt->format.height = r->height;
-	}
-
-	return 0;
-}
-
-static int smiapp_get_format(struct v4l2_subdev *subdev,
-			     struct v4l2_subdev_fh *fh,
-			     struct v4l2_subdev_format *fmt)
-{
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-	int rval;
-
-	mutex_lock(&sensor->mutex);
-	rval = __smiapp_get_format(subdev, fh, fmt);
-	mutex_unlock(&sensor->mutex);
-
-	return rval;
-}
-
-static void smiapp_get_crop_compose(struct v4l2_subdev *subdev,
-				    struct v4l2_subdev_fh *fh,
-				    struct v4l2_rect **crops,
-				    struct v4l2_rect **comps, int which)
-{
-	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
-	unsigned int i;
-
-	if (which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		if (crops)
-			for (i = 0; i < subdev->entity.num_pads; i++)
-				crops[i] = &ssd->crop[i];
-		if (comps)
-			*comps = &ssd->compose;
-	} else {
-		if (crops) {
-			for (i = 0; i < subdev->entity.num_pads; i++) {
-				crops[i] = v4l2_subdev_get_try_crop(fh, i);
-				BUG_ON(!crops[i]);
-			}
-		}
-		if (comps) {
-			*comps = v4l2_subdev_get_try_compose(fh,
-							     SMIAPP_PAD_SINK);
-			BUG_ON(!*comps);
-		}
-	}
-}
-
-/* Changes require propagation only on sink pad. */
-static void smiapp_propagate(struct v4l2_subdev *subdev,
-			     struct v4l2_subdev_fh *fh, int which,
-			     int target)
-{
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
-	struct v4l2_rect *comp, *crops[SMIAPP_PADS];
-
-	smiapp_get_crop_compose(subdev, fh, crops, &comp, which);
-
-	switch (target) {
-	case V4L2_SEL_TGT_CROP:
-		comp->width = crops[SMIAPP_PAD_SINK]->width;
-		comp->height = crops[SMIAPP_PAD_SINK]->height;
-		if (which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-			if (ssd == sensor->scaler) {
-				sensor->scale_m =
-					sensor->limits[
-						SMIAPP_LIMIT_SCALER_N_MIN];
-				sensor->scaling_mode =
-					SMIAPP_SCALING_MODE_NONE;
-			} else if (ssd == sensor->binner) {
-				sensor->binning_horizontal = 1;
-				sensor->binning_vertical = 1;
-			}
-		}
-		/* Fall through */
-	case V4L2_SEL_TGT_COMPOSE:
-		*crops[SMIAPP_PAD_SRC] = *comp;
-		break;
-	default:
-		BUG();
-	}
-}
-
-static const struct smiapp_csi_data_format
-*smiapp_validate_csi_data_format(struct smiapp_sensor *sensor, u32 code)
-{
-	const struct smiapp_csi_data_format *csi_format = sensor->csi_format;
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(smiapp_csi_data_formats); i++) {
-		if (sensor->mbus_frame_fmts & (1 << i)
-		    && smiapp_csi_data_formats[i].code == code)
-			return &smiapp_csi_data_formats[i];
-	}
-
-	return csi_format;
-}
-
-static int smiapp_set_format(struct v4l2_subdev *subdev,
-			     struct v4l2_subdev_fh *fh,
-			     struct v4l2_subdev_format *fmt)
-{
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
-	struct v4l2_rect *crops[SMIAPP_PADS];
-
-	mutex_lock(&sensor->mutex);
-
-	/*
-	 * Media bus code is changeable on src subdev's source pad. On
-	 * other source pads we just get format here.
-	 */
-	if (fmt->pad == ssd->source_pad) {
-		u32 code = fmt->format.code;
-		int rval = __smiapp_get_format(subdev, fh, fmt);
-
-		if (!rval && subdev == &sensor->src->sd) {
-			const struct smiapp_csi_data_format *csi_format =
-				smiapp_validate_csi_data_format(sensor, code);
-			if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
-				sensor->csi_format = csi_format;
-			fmt->format.code = csi_format->code;
-		}
-
-		mutex_unlock(&sensor->mutex);
-		return rval;
-	}
-
-	/* Sink pad. Width and height are changeable here. */
-	fmt->format.code = __smiapp_get_mbus_code(subdev, fmt->pad);
-	fmt->format.width &= ~1;
-	fmt->format.height &= ~1;
-
-	fmt->format.width =
-		clamp(fmt->format.width,
-		      sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE],
-		      sensor->limits[SMIAPP_LIMIT_MAX_X_OUTPUT_SIZE]);
-	fmt->format.height =
-		clamp(fmt->format.height,
-		      sensor->limits[SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE],
-		      sensor->limits[SMIAPP_LIMIT_MAX_Y_OUTPUT_SIZE]);
-
-	smiapp_get_crop_compose(subdev, fh, crops, NULL, fmt->which);
-
-	crops[ssd->sink_pad]->left = 0;
-	crops[ssd->sink_pad]->top = 0;
-	crops[ssd->sink_pad]->width = fmt->format.width;
-	crops[ssd->sink_pad]->height = fmt->format.height;
-	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE)
-		ssd->sink_fmt = *crops[ssd->sink_pad];
-	smiapp_propagate(subdev, fh, fmt->which,
-			 V4L2_SEL_TGT_CROP);
-
-	mutex_unlock(&sensor->mutex);
-
-	return 0;
-}
-
-/*
- * Calculate goodness of scaled image size compared to expected image
- * size and flags provided.
- */
-#define SCALING_GOODNESS		100000
-#define SCALING_GOODNESS_EXTREME	100000000
-static int scaling_goodness(struct v4l2_subdev *subdev, int w, int ask_w,
-			    int h, int ask_h, u32 flags)
-{
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-	struct i2c_client *client = v4l2_get_subdevdata(subdev);
-	int val = 0;
-
-	w &= ~1;
-	ask_w &= ~1;
-	h &= ~1;
-	ask_h &= ~1;
-
-	if (flags & V4L2_SEL_FLAG_GE) {
-		if (w < ask_w)
-			val -= SCALING_GOODNESS;
-		if (h < ask_h)
-			val -= SCALING_GOODNESS;
-	}
-
-	if (flags & V4L2_SEL_FLAG_LE) {
-		if (w > ask_w)
-			val -= SCALING_GOODNESS;
-		if (h > ask_h)
-			val -= SCALING_GOODNESS;
-	}
-
-	val -= abs(w - ask_w);
-	val -= abs(h - ask_h);
-
-	if (w < sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE])
-		val -= SCALING_GOODNESS_EXTREME;
-
-	dev_dbg(&client->dev, "w %d ask_w %d h %d ask_h %d goodness %d\n",
-		w, ask_h, h, ask_h, val);
-
-	return val;
-}
-
-static void smiapp_set_compose_binner(struct v4l2_subdev *subdev,
-				      struct v4l2_subdev_fh *fh,
-				      struct v4l2_subdev_selection *sel,
-				      struct v4l2_rect **crops,
-				      struct v4l2_rect *comp)
-{
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-	unsigned int i;
-	unsigned int binh = 1, binv = 1;
-	unsigned int best = scaling_goodness(
-		subdev,
-		crops[SMIAPP_PAD_SINK]->width, sel->r.width,
-		crops[SMIAPP_PAD_SINK]->height, sel->r.height, sel->flags);
-
-	for (i = 0; i < sensor->nbinning_subtypes; i++) {
-		int this = scaling_goodness(
-			subdev,
-			crops[SMIAPP_PAD_SINK]->width
-			/ sensor->binning_subtypes[i].horizontal,
-			sel->r.width,
-			crops[SMIAPP_PAD_SINK]->height
-			/ sensor->binning_subtypes[i].vertical,
-			sel->r.height, sel->flags);
-
-		if (this > best) {
-			binh = sensor->binning_subtypes[i].horizontal;
-			binv = sensor->binning_subtypes[i].vertical;
-			best = this;
-		}
-	}
-	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		sensor->binning_vertical = binv;
-		sensor->binning_horizontal = binh;
-	}
-
-	sel->r.width = (crops[SMIAPP_PAD_SINK]->width / binh) & ~1;
-	sel->r.height = (crops[SMIAPP_PAD_SINK]->height / binv) & ~1;
-}
-
-/*
- * Calculate best scaling ratio and mode for given output resolution.
- *
- * Try all of these: horizontal ratio, vertical ratio and smallest
- * size possible (horizontally).
- *
- * Also try whether horizontal scaler or full scaler gives a better
- * result.
- */
-static void smiapp_set_compose_scaler(struct v4l2_subdev *subdev,
-				      struct v4l2_subdev_fh *fh,
-				      struct v4l2_subdev_selection *sel,
-				      struct v4l2_rect **crops,
-				      struct v4l2_rect *comp)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(subdev);
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-	u32 min, max, a, b, max_m;
-	u32 scale_m = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN];
-	int mode = SMIAPP_SCALING_MODE_HORIZONTAL;
-	u32 try[4];
-	u32 ntry = 0;
-	unsigned int i;
-	int best = INT_MIN;
-
-	sel->r.width = min_t(unsigned int, sel->r.width,
-			     crops[SMIAPP_PAD_SINK]->width);
-	sel->r.height = min_t(unsigned int, sel->r.height,
-			      crops[SMIAPP_PAD_SINK]->height);
-
-	a = crops[SMIAPP_PAD_SINK]->width
-		* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] / sel->r.width;
-	b = crops[SMIAPP_PAD_SINK]->height
-		* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN] / sel->r.height;
-	max_m = crops[SMIAPP_PAD_SINK]->width
-		* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]
-		/ sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE];
-
-	a = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX],
-		max(a, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN]));
-	b = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX],
-		max(b, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN]));
-	max_m = min(sensor->limits[SMIAPP_LIMIT_SCALER_M_MAX],
-		    max(max_m, sensor->limits[SMIAPP_LIMIT_SCALER_M_MIN]));
-
-	dev_dbg(&client->dev, "scaling: a %d b %d max_m %d\n", a, b, max_m);
-
-	min = min(max_m, min(a, b));
-	max = min(max_m, max(a, b));
-
-	try[ntry] = min;
-	ntry++;
-	if (min != max) {
-		try[ntry] = max;
-		ntry++;
-	}
-	if (max != max_m) {
-		try[ntry] = min + 1;
-		ntry++;
-		if (min != max) {
-			try[ntry] = max + 1;
-			ntry++;
-		}
-	}
-
-	for (i = 0; i < ntry; i++) {
-		int this = scaling_goodness(
-			subdev,
-			crops[SMIAPP_PAD_SINK]->width
-			/ try[i]
-			* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN],
-			sel->r.width,
-			crops[SMIAPP_PAD_SINK]->height,
-			sel->r.height,
-			sel->flags);
-
-		dev_dbg(&client->dev, "trying factor %d (%d)\n", try[i], i);
-
-		if (this > best) {
-			scale_m = try[i];
-			mode = SMIAPP_SCALING_MODE_HORIZONTAL;
-			best = this;
-		}
-
-		if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
-		    == SMIAPP_SCALING_CAPABILITY_HORIZONTAL)
-			continue;
-
-		this = scaling_goodness(
-			subdev, crops[SMIAPP_PAD_SINK]->width
-			/ try[i]
-			* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN],
-			sel->r.width,
-			crops[SMIAPP_PAD_SINK]->height
-			/ try[i]
-			* sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN],
-			sel->r.height,
-			sel->flags);
-
-		if (this > best) {
-			scale_m = try[i];
-			mode = SMIAPP_SCALING_MODE_BOTH;
-			best = this;
-		}
-	}
-
-	sel->r.width =
-		(crops[SMIAPP_PAD_SINK]->width
-		 / scale_m
-		 * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN]) & ~1;
-	if (mode == SMIAPP_SCALING_MODE_BOTH)
-		sel->r.height =
-			(crops[SMIAPP_PAD_SINK]->height
-			 / scale_m
-			 * sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN])
-			& ~1;
-	else
-		sel->r.height = crops[SMIAPP_PAD_SINK]->height;
-
-	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		sensor->scale_m = scale_m;
-		sensor->scaling_mode = mode;
-	}
-}
-/* We're only called on source pads. This function sets scaling. */
-static int smiapp_set_compose(struct v4l2_subdev *subdev,
-			      struct v4l2_subdev_fh *fh,
-			      struct v4l2_subdev_selection *sel)
-{
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
-	struct v4l2_rect *comp, *crops[SMIAPP_PADS];
-
-	smiapp_get_crop_compose(subdev, fh, crops, &comp, sel->which);
-
-	sel->r.top = 0;
-	sel->r.left = 0;
-
-	if (ssd == sensor->binner)
-		smiapp_set_compose_binner(subdev, fh, sel, crops, comp);
-	else
-		smiapp_set_compose_scaler(subdev, fh, sel, crops, comp);
-
-	*comp = sel->r;
-	smiapp_propagate(subdev, fh, sel->which,
-			 V4L2_SEL_TGT_COMPOSE);
-
-	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE)
-		return smiapp_update_mode(sensor);
-
-	return 0;
-}
-
-static int __smiapp_sel_supported(struct v4l2_subdev *subdev,
-				  struct v4l2_subdev_selection *sel)
-{
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
-
-	/* We only implement crop in three places. */
-	switch (sel->target) {
-	case V4L2_SEL_TGT_CROP:
-	case V4L2_SEL_TGT_CROP_BOUNDS:
-		if (ssd == sensor->pixel_array
-		    && sel->pad == SMIAPP_PA_PAD_SRC)
-			return 0;
-		if (ssd == sensor->src
-		    && sel->pad == SMIAPP_PAD_SRC)
-			return 0;
-		if (ssd == sensor->scaler
-		    && sel->pad == SMIAPP_PAD_SINK
-		    && sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY]
-		    == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP)
-			return 0;
-		return -EINVAL;
-	case V4L2_SEL_TGT_COMPOSE:
-	case V4L2_SEL_TGT_COMPOSE_BOUNDS:
-		if (sel->pad == ssd->source_pad)
-			return -EINVAL;
-		if (ssd == sensor->binner)
-			return 0;
-		if (ssd == sensor->scaler
-		    && sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
-		    != SMIAPP_SCALING_CAPABILITY_NONE)
-			return 0;
-		/* Fall through */
-	default:
-		return -EINVAL;
-	}
-}
-
-static int smiapp_set_crop(struct v4l2_subdev *subdev,
-			   struct v4l2_subdev_fh *fh,
-			   struct v4l2_subdev_selection *sel)
-{
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
-	struct v4l2_rect *src_size, *crops[SMIAPP_PADS];
-	struct v4l2_rect _r;
-
-	smiapp_get_crop_compose(subdev, fh, crops, NULL, sel->which);
-
-	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		if (sel->pad == ssd->sink_pad)
-			src_size = &ssd->sink_fmt;
-		else
-			src_size = &ssd->compose;
-	} else {
-		if (sel->pad == ssd->sink_pad) {
-			_r.left = 0;
-			_r.top = 0;
-			_r.width = v4l2_subdev_get_try_format(fh, sel->pad)
-				->width;
-			_r.height = v4l2_subdev_get_try_format(fh, sel->pad)
-				->height;
-			src_size = &_r;
-		} else {
-			src_size =
-				v4l2_subdev_get_try_compose(
-					fh, ssd->sink_pad);
-		}
-	}
-
-	if (ssd == sensor->src && sel->pad == SMIAPP_PAD_SRC) {
-		sel->r.left = 0;
-		sel->r.top = 0;
-	}
-
-	sel->r.width = min(sel->r.width, src_size->width);
-	sel->r.height = min(sel->r.height, src_size->height);
-
-	sel->r.left = min(sel->r.left, src_size->width - sel->r.width);
-	sel->r.top = min(sel->r.top, src_size->height - sel->r.height);
-
-	*crops[sel->pad] = sel->r;
-
-	if (ssd != sensor->pixel_array && sel->pad == SMIAPP_PAD_SINK)
-		smiapp_propagate(subdev, fh, sel->which,
-				 V4L2_SEL_TGT_CROP);
-
-	return 0;
-}
-
-static int __smiapp_get_selection(struct v4l2_subdev *subdev,
-				  struct v4l2_subdev_fh *fh,
-				  struct v4l2_subdev_selection *sel)
-{
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-	struct smiapp_subdev *ssd = to_smiapp_subdev(subdev);
-	struct v4l2_rect *comp, *crops[SMIAPP_PADS];
-	struct v4l2_rect sink_fmt;
-	int ret;
-
-	ret = __smiapp_sel_supported(subdev, sel);
-	if (ret)
-		return ret;
-
-	smiapp_get_crop_compose(subdev, fh, crops, &comp, sel->which);
-
-	if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
-		sink_fmt = ssd->sink_fmt;
-	} else {
-		struct v4l2_mbus_framefmt *fmt =
-			v4l2_subdev_get_try_format(fh, ssd->sink_pad);
-
-		sink_fmt.left = 0;
-		sink_fmt.top = 0;
-		sink_fmt.width = fmt->width;
-		sink_fmt.height = fmt->height;
-	}
-
-	switch (sel->target) {
-	case V4L2_SEL_TGT_CROP_BOUNDS:
-		if (ssd == sensor->pixel_array) {
-			sel->r.width =
-				sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1;
-			sel->r.height =
-				sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1;
-		} else if (sel->pad == ssd->sink_pad) {
-			sel->r = sink_fmt;
-		} else {
-			sel->r = *comp;
-		}
-		break;
-	case V4L2_SEL_TGT_CROP:
-	case V4L2_SEL_TGT_COMPOSE_BOUNDS:
-		sel->r = *crops[sel->pad];
-		break;
-	case V4L2_SEL_TGT_COMPOSE:
-		sel->r = *comp;
-		break;
-	}
-
-	return 0;
-}
-
-static int smiapp_get_selection(struct v4l2_subdev *subdev,
-				struct v4l2_subdev_fh *fh,
-				struct v4l2_subdev_selection *sel)
-{
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-	int rval;
-
-	mutex_lock(&sensor->mutex);
-	rval = __smiapp_get_selection(subdev, fh, sel);
-	mutex_unlock(&sensor->mutex);
-
-	return rval;
-}
-static int smiapp_set_selection(struct v4l2_subdev *subdev,
-				struct v4l2_subdev_fh *fh,
-				struct v4l2_subdev_selection *sel)
-{
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-	int ret;
-
-	ret = __smiapp_sel_supported(subdev, sel);
-	if (ret)
-		return ret;
-
-	mutex_lock(&sensor->mutex);
-
-	sel->r.left = max(0, sel->r.left & ~1);
-	sel->r.top = max(0, sel->r.top & ~1);
-	sel->r.width = max(0, SMIAPP_ALIGN_DIM(sel->r.width, sel->flags));
-	sel->r.height = max(0, SMIAPP_ALIGN_DIM(sel->r.height, sel->flags));
-
-	sel->r.width = max_t(unsigned int,
-			     sensor->limits[SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE],
-			     sel->r.width);
-	sel->r.height = max_t(unsigned int,
-			      sensor->limits[SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE],
-			      sel->r.height);
-
-	switch (sel->target) {
-	case V4L2_SEL_TGT_CROP:
-		ret = smiapp_set_crop(subdev, fh, sel);
-		break;
-	case V4L2_SEL_TGT_COMPOSE:
-		ret = smiapp_set_compose(subdev, fh, sel);
-		break;
-	default:
-		BUG();
-	}
-
-	mutex_unlock(&sensor->mutex);
-	return ret;
-}
-
-static int smiapp_get_skip_frames(struct v4l2_subdev *subdev, u32 *frames)
-{
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-
-	*frames = sensor->frame_skip;
-	return 0;
-}
-
-/* -----------------------------------------------------------------------------
- * sysfs attributes
- */
-
-static ssize_t
-smiapp_sysfs_nvm_read(struct device *dev, struct device_attribute *attr,
-		      char *buf)
-{
-	struct v4l2_subdev *subdev = i2c_get_clientdata(to_i2c_client(dev));
-	struct i2c_client *client = v4l2_get_subdevdata(subdev);
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-	unsigned int nbytes;
-
-	if (!sensor->dev_init_done)
-		return -EBUSY;
-
-	if (!sensor->nvm_size) {
-		/* NVM not read yet - read it now */
-		sensor->nvm_size = sensor->platform_data->nvm_size;
-		if (smiapp_set_power(subdev, 1) < 0)
-			return -ENODEV;
-		if (smiapp_read_nvm(sensor, sensor->nvm)) {
-			dev_err(&client->dev, "nvm read failed\n");
-			return -ENODEV;
-		}
-		smiapp_set_power(subdev, 0);
-	}
-	/*
-	 * NVM is still way below a PAGE_SIZE, so we can safely
-	 * assume this for now.
-	 */
-	nbytes = min_t(unsigned int, sensor->nvm_size, PAGE_SIZE);
-	memcpy(buf, sensor->nvm, nbytes);
-
-	return nbytes;
-}
-static DEVICE_ATTR(nvm, S_IRUGO, smiapp_sysfs_nvm_read, NULL);
-
-/* -----------------------------------------------------------------------------
- * V4L2 subdev core operations
- */
-
-static int smiapp_identify_module(struct v4l2_subdev *subdev)
-{
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-	struct i2c_client *client = v4l2_get_subdevdata(subdev);
-	struct smiapp_module_info *minfo = &sensor->minfo;
-	unsigned int i;
-	int rval = 0;
-
-	minfo->name = SMIAPP_NAME;
-
-	/* Module info */
-	rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_MANUFACTURER_ID,
-				 &minfo->manufacturer_id);
-	if (!rval)
-		rval = smiapp_read_8only(sensor, SMIAPP_REG_U16_MODEL_ID,
-					 &minfo->model_id);
-	if (!rval)
-		rval = smiapp_read_8only(sensor,
-					 SMIAPP_REG_U8_REVISION_NUMBER_MAJOR,
-					 &minfo->revision_number_major);
-	if (!rval)
-		rval = smiapp_read_8only(sensor,
-					 SMIAPP_REG_U8_REVISION_NUMBER_MINOR,
-					 &minfo->revision_number_minor);
-	if (!rval)
-		rval = smiapp_read_8only(sensor,
-					 SMIAPP_REG_U8_MODULE_DATE_YEAR,
-					 &minfo->module_year);
-	if (!rval)
-		rval = smiapp_read_8only(sensor,
-					 SMIAPP_REG_U8_MODULE_DATE_MONTH,
-					 &minfo->module_month);
-	if (!rval)
-		rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_MODULE_DATE_DAY,
-					 &minfo->module_day);
-
-	/* Sensor info */
-	if (!rval)
-		rval = smiapp_read_8only(sensor,
-					 SMIAPP_REG_U8_SENSOR_MANUFACTURER_ID,
-					 &minfo->sensor_manufacturer_id);
-	if (!rval)
-		rval = smiapp_read_8only(sensor,
-					 SMIAPP_REG_U16_SENSOR_MODEL_ID,
-					 &minfo->sensor_model_id);
-	if (!rval)
-		rval = smiapp_read_8only(sensor,
-					 SMIAPP_REG_U8_SENSOR_REVISION_NUMBER,
-					 &minfo->sensor_revision_number);
-	if (!rval)
-		rval = smiapp_read_8only(sensor,
-					 SMIAPP_REG_U8_SENSOR_FIRMWARE_VERSION,
-					 &minfo->sensor_firmware_version);
-
-	/* SMIA */
-	if (!rval)
-		rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_SMIA_VERSION,
-					 &minfo->smia_version);
-	if (!rval)
-		rval = smiapp_read_8only(sensor, SMIAPP_REG_U8_SMIAPP_VERSION,
-					 &minfo->smiapp_version);
-
-	if (rval) {
-		dev_err(&client->dev, "sensor detection failed\n");
-		return -ENODEV;
-	}
-
-	dev_dbg(&client->dev, "module 0x%2.2x-0x%4.4x\n",
-		minfo->manufacturer_id, minfo->model_id);
-
-	dev_dbg(&client->dev,
-		"module revision 0x%2.2x-0x%2.2x date %2.2d-%2.2d-%2.2d\n",
-		minfo->revision_number_major, minfo->revision_number_minor,
-		minfo->module_year, minfo->module_month, minfo->module_day);
-
-	dev_dbg(&client->dev, "sensor 0x%2.2x-0x%4.4x\n",
-		minfo->sensor_manufacturer_id, minfo->sensor_model_id);
-
-	dev_dbg(&client->dev,
-		"sensor revision 0x%2.2x firmware version 0x%2.2x\n",
-		minfo->sensor_revision_number, minfo->sensor_firmware_version);
-
-	dev_dbg(&client->dev, "smia version %2.2d smiapp version %2.2d\n",
-		minfo->smia_version, minfo->smiapp_version);
-
-	/*
-	 * Some modules have bad data in the lvalues below. Hope the
-	 * rvalues have better stuff. The lvalues are module
-	 * parameters whereas the rvalues are sensor parameters.
-	 */
-	if (!minfo->manufacturer_id && !minfo->model_id) {
-		minfo->manufacturer_id = minfo->sensor_manufacturer_id;
-		minfo->model_id = minfo->sensor_model_id;
-		minfo->revision_number_major = minfo->sensor_revision_number;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(smiapp_module_idents); i++) {
-		if (smiapp_module_idents[i].manufacturer_id
-		    != minfo->manufacturer_id)
-			continue;
-		if (smiapp_module_idents[i].model_id != minfo->model_id)
-			continue;
-		if (smiapp_module_idents[i].flags
-		    & SMIAPP_MODULE_IDENT_FLAG_REV_LE) {
-			if (smiapp_module_idents[i].revision_number_major
-			    < minfo->revision_number_major)
-				continue;
-		} else {
-			if (smiapp_module_idents[i].revision_number_major
-			    != minfo->revision_number_major)
-				continue;
-		}
-
-		minfo->name = smiapp_module_idents[i].name;
-		minfo->quirk = smiapp_module_idents[i].quirk;
-		break;
-	}
-
-	if (i >= ARRAY_SIZE(smiapp_module_idents))
-		dev_warn(&client->dev,
-			 "no quirks for this module; let's hope it's fully compliant\n");
-
-	dev_dbg(&client->dev, "the sensor is called %s, ident %2.2x%4.4x%2.2x\n",
-		minfo->name, minfo->manufacturer_id, minfo->model_id,
-		minfo->revision_number_major);
-
-	strlcpy(subdev->name, sensor->minfo.name, sizeof(subdev->name));
-
-	return 0;
-}
-
-static const struct v4l2_subdev_ops smiapp_ops;
-static const struct v4l2_subdev_internal_ops smiapp_internal_ops;
-static const struct media_entity_operations smiapp_entity_ops;
-
-static int smiapp_registered(struct v4l2_subdev *subdev)
-{
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-	struct i2c_client *client = v4l2_get_subdevdata(subdev);
-	struct smiapp_subdev *last = NULL;
-	u32 tmp;
-	unsigned int i;
-	int rval;
-
-	sensor->vana = regulator_get(&client->dev, "VANA");
-	if (IS_ERR(sensor->vana)) {
-		dev_err(&client->dev, "could not get regulator for vana\n");
-		return -ENODEV;
-	}
-
-	if (!sensor->platform_data->set_xclk) {
-		sensor->ext_clk = clk_get(&client->dev,
-					  sensor->platform_data->ext_clk_name);
-		if (IS_ERR(sensor->ext_clk)) {
-			dev_err(&client->dev, "could not get clock %s\n",
-				sensor->platform_data->ext_clk_name);
-			rval = -ENODEV;
-			goto out_clk_get;
-		}
-
-		rval = clk_set_rate(sensor->ext_clk,
-				    sensor->platform_data->ext_clk);
-		if (rval < 0) {
-			dev_err(&client->dev,
-				"unable to set clock %s freq to %u\n",
-				sensor->platform_data->ext_clk_name,
-				sensor->platform_data->ext_clk);
-			rval = -ENODEV;
-			goto out_clk_set_rate;
-		}
-	}
-
-	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN) {
-		if (gpio_request_one(sensor->platform_data->xshutdown, 0,
-				     "SMIA++ xshutdown") != 0) {
-			dev_err(&client->dev,
-				"unable to acquire reset gpio %d\n",
-				sensor->platform_data->xshutdown);
-			rval = -ENODEV;
-			goto out_clk_set_rate;
-		}
-	}
-
-	rval = smiapp_power_on(sensor);
-	if (rval) {
-		rval = -ENODEV;
-		goto out_smiapp_power_on;
-	}
-
-	rval = smiapp_identify_module(subdev);
-	if (rval) {
-		rval = -ENODEV;
-		goto out_power_off;
-	}
-
-	rval = smiapp_get_all_limits(sensor);
-	if (rval) {
-		rval = -ENODEV;
-		goto out_power_off;
-	}
-
-	/*
-	 * Handle Sensor Module orientation on the board.
-	 *
-	 * The application of H-FLIP and V-FLIP on the sensor is modified by
-	 * the sensor orientation on the board.
-	 *
-	 * For SMIAPP_BOARD_SENSOR_ORIENT_180 the default behaviour is to set
-	 * both H-FLIP and V-FLIP for normal operation which also implies
-	 * that a set/unset operation for user space HFLIP and VFLIP v4l2
-	 * controls will need to be internally inverted.
-	 *
-	 * Rotation also changes the bayer pattern.
-	 */
-	if (sensor->platform_data->module_board_orient ==
-	    SMIAPP_MODULE_BOARD_ORIENT_180)
-		sensor->hvflip_inv_mask = SMIAPP_IMAGE_ORIENTATION_HFLIP |
-					  SMIAPP_IMAGE_ORIENTATION_VFLIP;
-
-	rval = smiapp_get_mbus_formats(sensor);
-	if (rval) {
-		rval = -ENODEV;
-		goto out_power_off;
-	}
-
-	if (sensor->limits[SMIAPP_LIMIT_BINNING_CAPABILITY]) {
-		u32 val;
-
-		rval = smiapp_read(sensor,
-				   SMIAPP_REG_U8_BINNING_SUBTYPES, &val);
-		if (rval < 0) {
-			rval = -ENODEV;
-			goto out_power_off;
-		}
-		sensor->nbinning_subtypes = min_t(u8, val,
-						  SMIAPP_BINNING_SUBTYPES);
-
-		for (i = 0; i < sensor->nbinning_subtypes; i++) {
-			rval = smiapp_read(
-				sensor, SMIAPP_REG_U8_BINNING_TYPE_n(i), &val);
-			if (rval < 0) {
-				rval = -ENODEV;
-				goto out_power_off;
-			}
-			sensor->binning_subtypes[i] =
-				*(struct smiapp_binning_subtype *)&val;
-
-			dev_dbg(&client->dev, "binning %xx%x\n",
-				sensor->binning_subtypes[i].horizontal,
-				sensor->binning_subtypes[i].vertical);
-		}
-	}
-	sensor->binning_horizontal = 1;
-	sensor->binning_vertical = 1;
-
-	/* SMIA++ NVM initialization - it will be read from the sensor
-	 * when it is first requested by userspace.
-	 */
-	if (sensor->minfo.smiapp_version && sensor->platform_data->nvm_size) {
-		sensor->nvm = kzalloc(sensor->platform_data->nvm_size,
-				      GFP_KERNEL);
-		if (sensor->nvm == NULL) {
-			dev_err(&client->dev, "nvm buf allocation failed\n");
-			rval = -ENOMEM;
-			goto out_power_off;
-		}
-
-		if (device_create_file(&client->dev, &dev_attr_nvm) != 0) {
-			dev_err(&client->dev, "sysfs nvm entry failed\n");
-			rval = -EBUSY;
-			goto out_power_off;
-		}
-	}
-
-	rval = smiapp_call_quirk(sensor, limits);
-	if (rval) {
-		dev_err(&client->dev, "limits quirks failed\n");
-		goto out_nvm_release;
-	}
-
-	/* We consider this as profile 0 sensor if any of these are zero. */
-	if (!sensor->limits[SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV] ||
-	    !sensor->limits[SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV] ||
-	    !sensor->limits[SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV] ||
-	    !sensor->limits[SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV]) {
-		sensor->minfo.smiapp_profile = SMIAPP_PROFILE_0;
-	} else if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
-		   != SMIAPP_SCALING_CAPABILITY_NONE) {
-		if (sensor->limits[SMIAPP_LIMIT_SCALING_CAPABILITY]
-		    == SMIAPP_SCALING_CAPABILITY_HORIZONTAL)
-			sensor->minfo.smiapp_profile = SMIAPP_PROFILE_1;
-		else
-			sensor->minfo.smiapp_profile = SMIAPP_PROFILE_2;
-		sensor->scaler = &sensor->ssds[sensor->ssds_used];
-		sensor->ssds_used++;
-	} else if (sensor->limits[SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY]
-		   == SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP) {
-		sensor->scaler = &sensor->ssds[sensor->ssds_used];
-		sensor->ssds_used++;
-	}
-	sensor->binner = &sensor->ssds[sensor->ssds_used];
-	sensor->ssds_used++;
-	sensor->pixel_array = &sensor->ssds[sensor->ssds_used];
-	sensor->ssds_used++;
-
-	sensor->scale_m = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN];
-
-	for (i = 0; i < SMIAPP_SUBDEVS; i++) {
-		struct {
-			struct smiapp_subdev *ssd;
-			char *name;
-		} const __this[] = {
-			{ sensor->scaler, "scaler", },
-			{ sensor->binner, "binner", },
-			{ sensor->pixel_array, "pixel array", },
-		}, *_this = &__this[i];
-		struct smiapp_subdev *this = _this->ssd;
-
-		if (!this)
-			continue;
-
-		if (this != sensor->src)
-			v4l2_subdev_init(&this->sd, &smiapp_ops);
-
-		this->sensor = sensor;
-
-		if (this == sensor->pixel_array) {
-			this->npads = 1;
-		} else {
-			this->npads = 2;
-			this->source_pad = 1;
-		}
-
-		snprintf(this->sd.name,
-			 sizeof(this->sd.name), "%s %s",
-			 sensor->minfo.name, _this->name);
-
-		this->sink_fmt.width =
-			sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1;
-		this->sink_fmt.height =
-			sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1;
-		this->compose.width = this->sink_fmt.width;
-		this->compose.height = this->sink_fmt.height;
-		this->crop[this->source_pad] = this->compose;
-		this->pads[this->source_pad].flags = MEDIA_PAD_FL_SOURCE;
-		if (this != sensor->pixel_array) {
-			this->crop[this->sink_pad] = this->compose;
-			this->pads[this->sink_pad].flags = MEDIA_PAD_FL_SINK;
-		}
-
-		this->sd.entity.ops = &smiapp_entity_ops;
-
-		if (last == NULL) {
-			last = this;
-			continue;
-		}
-
-		this->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
-		this->sd.internal_ops = &smiapp_internal_ops;
-		this->sd.owner = NULL;
-		v4l2_set_subdevdata(&this->sd, client);
-
-		rval = media_entity_init(&this->sd.entity,
-					 this->npads, this->pads, 0);
-		if (rval) {
-			dev_err(&client->dev,
-				"media_entity_init failed\n");
-			goto out_nvm_release;
-		}
-
-		rval = media_entity_create_link(&this->sd.entity,
-						this->source_pad,
-						&last->sd.entity,
-						last->sink_pad,
-						MEDIA_LNK_FL_ENABLED |
-						MEDIA_LNK_FL_IMMUTABLE);
-		if (rval) {
-			dev_err(&client->dev,
-				"media_entity_create_link failed\n");
-			goto out_nvm_release;
-		}
-
-		rval = v4l2_device_register_subdev(sensor->src->sd.v4l2_dev,
-						   &this->sd);
-		if (rval) {
-			dev_err(&client->dev,
-				"v4l2_device_register_subdev failed\n");
-			goto out_nvm_release;
-		}
-
-		last = this;
-	}
-
-	dev_dbg(&client->dev, "profile %d\n", sensor->minfo.smiapp_profile);
-
-	sensor->pixel_array->sd.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR;
-
-	/* final steps */
-	smiapp_read_frame_fmt(sensor);
-	rval = smiapp_init_controls(sensor);
-	if (rval < 0)
-		goto out_nvm_release;
-
-	rval = smiapp_update_mode(sensor);
-	if (rval) {
-		dev_err(&client->dev, "update mode failed\n");
-		goto out_nvm_release;
-	}
-
-	sensor->streaming = false;
-	sensor->dev_init_done = true;
-
-	/* check flash capability */
-	rval = smiapp_read(sensor, SMIAPP_REG_U8_FLASH_MODE_CAPABILITY, &tmp);
-	sensor->flash_capability = tmp;
-	if (rval)
-		goto out_nvm_release;
-
-	smiapp_power_off(sensor);
-
-	return 0;
-
-out_nvm_release:
-	device_remove_file(&client->dev, &dev_attr_nvm);
-
-out_power_off:
-	kfree(sensor->nvm);
-	sensor->nvm = NULL;
-	smiapp_power_off(sensor);
-
-out_smiapp_power_on:
-	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
-		gpio_free(sensor->platform_data->xshutdown);
-
-out_clk_set_rate:
-	clk_put(sensor->ext_clk);
-	sensor->ext_clk = NULL;
-
-out_clk_get:
-	regulator_put(sensor->vana);
-	sensor->vana = NULL;
-	return rval;
-}
-
-static int smiapp_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-{
-	struct smiapp_subdev *ssd = to_smiapp_subdev(sd);
-	struct smiapp_sensor *sensor = ssd->sensor;
-	u32 mbus_code =
-		smiapp_csi_data_formats[smiapp_pixel_order(sensor)].code;
-	unsigned int i;
-
-	mutex_lock(&sensor->mutex);
-
-	for (i = 0; i < ssd->npads; i++) {
-		struct v4l2_mbus_framefmt *try_fmt =
-			v4l2_subdev_get_try_format(fh, i);
-		struct v4l2_rect *try_crop = v4l2_subdev_get_try_crop(fh, i);
-		struct v4l2_rect *try_comp;
-
-		try_fmt->width = sensor->limits[SMIAPP_LIMIT_X_ADDR_MAX] + 1;
-		try_fmt->height = sensor->limits[SMIAPP_LIMIT_Y_ADDR_MAX] + 1;
-		try_fmt->code = mbus_code;
-
-		try_crop->top = 0;
-		try_crop->left = 0;
-		try_crop->width = try_fmt->width;
-		try_crop->height = try_fmt->height;
-
-		if (ssd != sensor->pixel_array)
-			continue;
-
-		try_comp = v4l2_subdev_get_try_compose(fh, i);
-		*try_comp = *try_crop;
-	}
-
-	mutex_unlock(&sensor->mutex);
-
-	return smiapp_set_power(sd, 1);
-}
-
-static int smiapp_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
-{
-	return smiapp_set_power(sd, 0);
-}
-
-static const struct v4l2_subdev_video_ops smiapp_video_ops = {
-	.s_stream = smiapp_set_stream,
-};
-
-static const struct v4l2_subdev_core_ops smiapp_core_ops = {
-	.s_power = smiapp_set_power,
-};
-
-static const struct v4l2_subdev_pad_ops smiapp_pad_ops = {
-	.enum_mbus_code = smiapp_enum_mbus_code,
-	.get_fmt = smiapp_get_format,
-	.set_fmt = smiapp_set_format,
-	.get_selection = smiapp_get_selection,
-	.set_selection = smiapp_set_selection,
-};
-
-static const struct v4l2_subdev_sensor_ops smiapp_sensor_ops = {
-	.g_skip_frames = smiapp_get_skip_frames,
-};
-
-static const struct v4l2_subdev_ops smiapp_ops = {
-	.core = &smiapp_core_ops,
-	.video = &smiapp_video_ops,
-	.pad = &smiapp_pad_ops,
-	.sensor = &smiapp_sensor_ops,
-};
-
-static const struct media_entity_operations smiapp_entity_ops = {
-	.link_validate = v4l2_subdev_link_validate,
-};
-
-static const struct v4l2_subdev_internal_ops smiapp_internal_src_ops = {
-	.registered = smiapp_registered,
-	.open = smiapp_open,
-	.close = smiapp_close,
-};
-
-static const struct v4l2_subdev_internal_ops smiapp_internal_ops = {
-	.open = smiapp_open,
-	.close = smiapp_close,
-};
-
-/* -----------------------------------------------------------------------------
- * I2C Driver
- */
-
-#ifdef CONFIG_PM
-
-static int smiapp_suspend(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-	bool streaming;
-
-	BUG_ON(mutex_is_locked(&sensor->mutex));
-
-	if (sensor->power_count == 0)
-		return 0;
-
-	if (sensor->streaming)
-		smiapp_stop_streaming(sensor);
-
-	streaming = sensor->streaming;
-
-	smiapp_power_off(sensor);
-
-	/* save state for resume */
-	sensor->streaming = streaming;
-
-	return 0;
-}
-
-static int smiapp_resume(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-	int rval;
-
-	if (sensor->power_count == 0)
-		return 0;
-
-	rval = smiapp_power_on(sensor);
-	if (rval)
-		return rval;
-
-	if (sensor->streaming)
-		rval = smiapp_start_streaming(sensor);
-
-	return rval;
-}
-
-#else
-
-#define smiapp_suspend	NULL
-#define smiapp_resume	NULL
-
-#endif /* CONFIG_PM */
-
-static int smiapp_probe(struct i2c_client *client,
-			const struct i2c_device_id *devid)
-{
-	struct smiapp_sensor *sensor;
-	int rval;
-
-	if (client->dev.platform_data == NULL)
-		return -ENODEV;
-
-	sensor = kzalloc(sizeof(*sensor), GFP_KERNEL);
-	if (sensor == NULL)
-		return -ENOMEM;
-
-	sensor->platform_data = client->dev.platform_data;
-	mutex_init(&sensor->mutex);
-	mutex_init(&sensor->power_mutex);
-	sensor->src = &sensor->ssds[sensor->ssds_used];
-
-	v4l2_i2c_subdev_init(&sensor->src->sd, client, &smiapp_ops);
-	sensor->src->sd.internal_ops = &smiapp_internal_src_ops;
-	sensor->src->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
-	sensor->src->sensor = sensor;
-
-	sensor->src->pads[0].flags = MEDIA_PAD_FL_SOURCE;
-	rval = media_entity_init(&sensor->src->sd.entity, 2,
-				 sensor->src->pads, 0);
-	if (rval < 0)
-		kfree(sensor);
-
-	return rval;
-}
-
-static int __exit smiapp_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *subdev = i2c_get_clientdata(client);
-	struct smiapp_sensor *sensor = to_smiapp_sensor(subdev);
-	unsigned int i;
-
-	if (sensor->power_count) {
-		if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
-			gpio_set_value(sensor->platform_data->xshutdown, 0);
-		if (sensor->platform_data->set_xclk)
-			sensor->platform_data->set_xclk(&sensor->src->sd, 0);
-		else
-			clk_disable(sensor->ext_clk);
-		sensor->power_count = 0;
-	}
-
-	if (sensor->nvm) {
-		device_remove_file(&client->dev, &dev_attr_nvm);
-		kfree(sensor->nvm);
-	}
-
-	for (i = 0; i < sensor->ssds_used; i++) {
-		media_entity_cleanup(&sensor->ssds[i].sd.entity);
-		v4l2_device_unregister_subdev(&sensor->ssds[i].sd);
-	}
-	smiapp_free_controls(sensor);
-	if (sensor->platform_data->xshutdown != SMIAPP_NO_XSHUTDOWN)
-		gpio_free(sensor->platform_data->xshutdown);
-	if (sensor->ext_clk)
-		clk_put(sensor->ext_clk);
-	if (sensor->vana)
-		regulator_put(sensor->vana);
-
-	kfree(sensor);
-
-	return 0;
-}
-
-static const struct i2c_device_id smiapp_id_table[] = {
-	{ SMIAPP_NAME, 0 },
-	{ },
-};
-MODULE_DEVICE_TABLE(i2c, smiapp_id_table);
-
-static const struct dev_pm_ops smiapp_pm_ops = {
-	.suspend	= smiapp_suspend,
-	.resume		= smiapp_resume,
-};
-
-static struct i2c_driver smiapp_i2c_driver = {
-	.driver	= {
-		.name = SMIAPP_NAME,
-		.pm = &smiapp_pm_ops,
-	},
-	.probe	= smiapp_probe,
-	.remove	= __exit_p(smiapp_remove),
-	.id_table = smiapp_id_table,
-};
-
-module_i2c_driver(smiapp_i2c_driver);
-
-MODULE_AUTHOR("Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>");
-MODULE_DESCRIPTION("Generic SMIA/SMIA++ camera module driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/smiapp/smiapp-limits.c b/drivers/media/video/smiapp/smiapp-limits.c
deleted file mode 100644
index 0800e09..0000000
--- a/drivers/media/video/smiapp/smiapp-limits.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * drivers/media/video/smiapp/smiapp-limits.c
- *
- * Generic driver for SMIA/SMIA++ compliant camera modules
- *
- * Copyright (C) 2011--2012 Nokia Corporation
- * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include "smiapp.h"
-
-struct smiapp_reg_limits smiapp_reg_limits[] = {
-	{ SMIAPP_REG_U16_ANALOGUE_GAIN_CAPABILITY, "analogue_gain_capability" }, /* 0 */
-	{ SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MIN, "analogue_gain_code_min" },
-	{ SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MAX, "analogue_gain_code_max" },
-	{ SMIAPP_REG_U8_THS_ZERO_MIN, "ths_zero_min" },
-	{ SMIAPP_REG_U8_TCLK_TRAIL_MIN, "tclk_trail_min" },
-	{ SMIAPP_REG_U16_INTEGRATION_TIME_CAPABILITY, "integration_time_capability" }, /* 5 */
-	{ SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MIN, "coarse_integration_time_min" },
-	{ SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MAX_MARGIN, "coarse_integration_time_max_margin" },
-	{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN, "fine_integration_time_min" },
-	{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN, "fine_integration_time_max_margin" },
-	{ SMIAPP_REG_U16_DIGITAL_GAIN_CAPABILITY, "digital_gain_capability" }, /* 10 */
-	{ SMIAPP_REG_U16_DIGITAL_GAIN_MIN, "digital_gain_min" },
-	{ SMIAPP_REG_U16_DIGITAL_GAIN_MAX, "digital_gain_max" },
-	{ SMIAPP_REG_F32_MIN_EXT_CLK_FREQ_HZ, "min_ext_clk_freq_hz" },
-	{ SMIAPP_REG_F32_MAX_EXT_CLK_FREQ_HZ, "max_ext_clk_freq_hz" },
-	{ SMIAPP_REG_U16_MIN_PRE_PLL_CLK_DIV, "min_pre_pll_clk_div" }, /* 15 */
-	{ SMIAPP_REG_U16_MAX_PRE_PLL_CLK_DIV, "max_pre_pll_clk_div" },
-	{ SMIAPP_REG_F32_MIN_PLL_IP_FREQ_HZ, "min_pll_ip_freq_hz" },
-	{ SMIAPP_REG_F32_MAX_PLL_IP_FREQ_HZ, "max_pll_ip_freq_hz" },
-	{ SMIAPP_REG_U16_MIN_PLL_MULTIPLIER, "min_pll_multiplier" },
-	{ SMIAPP_REG_U16_MAX_PLL_MULTIPLIER, "max_pll_multiplier" }, /* 20 */
-	{ SMIAPP_REG_F32_MIN_PLL_OP_FREQ_HZ, "min_pll_op_freq_hz" },
-	{ SMIAPP_REG_F32_MAX_PLL_OP_FREQ_HZ, "max_pll_op_freq_hz" },
-	{ SMIAPP_REG_U16_MIN_VT_SYS_CLK_DIV, "min_vt_sys_clk_div" },
-	{ SMIAPP_REG_U16_MAX_VT_SYS_CLK_DIV, "max_vt_sys_clk_div" },
-	{ SMIAPP_REG_F32_MIN_VT_SYS_CLK_FREQ_HZ, "min_vt_sys_clk_freq_hz" }, /* 25 */
-	{ SMIAPP_REG_F32_MAX_VT_SYS_CLK_FREQ_HZ, "max_vt_sys_clk_freq_hz" },
-	{ SMIAPP_REG_F32_MIN_VT_PIX_CLK_FREQ_HZ, "min_vt_pix_clk_freq_hz" },
-	{ SMIAPP_REG_F32_MAX_VT_PIX_CLK_FREQ_HZ, "max_vt_pix_clk_freq_hz" },
-	{ SMIAPP_REG_U16_MIN_VT_PIX_CLK_DIV, "min_vt_pix_clk_div" },
-	{ SMIAPP_REG_U16_MAX_VT_PIX_CLK_DIV, "max_vt_pix_clk_div" }, /* 30 */
-	{ SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES, "min_frame_length_lines" },
-	{ SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES, "max_frame_length_lines" },
-	{ SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK, "min_line_length_pck" },
-	{ SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK, "max_line_length_pck" },
-	{ SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK, "min_line_blanking_pck" }, /* 35 */
-	{ SMIAPP_REG_U16_MIN_FRAME_BLANKING_LINES, "min_frame_blanking_lines" },
-	{ SMIAPP_REG_U8_MIN_LINE_LENGTH_PCK_STEP_SIZE, "min_line_length_pck_step_size" },
-	{ SMIAPP_REG_U16_MIN_OP_SYS_CLK_DIV, "min_op_sys_clk_div" },
-	{ SMIAPP_REG_U16_MAX_OP_SYS_CLK_DIV, "max_op_sys_clk_div" },
-	{ SMIAPP_REG_F32_MIN_OP_SYS_CLK_FREQ_HZ, "min_op_sys_clk_freq_hz" }, /* 40 */
-	{ SMIAPP_REG_F32_MAX_OP_SYS_CLK_FREQ_HZ, "max_op_sys_clk_freq_hz" },
-	{ SMIAPP_REG_U16_MIN_OP_PIX_CLK_DIV, "min_op_pix_clk_div" },
-	{ SMIAPP_REG_U16_MAX_OP_PIX_CLK_DIV, "max_op_pix_clk_div" },
-	{ SMIAPP_REG_F32_MIN_OP_PIX_CLK_FREQ_HZ, "min_op_pix_clk_freq_hz" },
-	{ SMIAPP_REG_F32_MAX_OP_PIX_CLK_FREQ_HZ, "max_op_pix_clk_freq_hz" }, /* 45 */
-	{ SMIAPP_REG_U16_X_ADDR_MIN, "x_addr_min" },
-	{ SMIAPP_REG_U16_Y_ADDR_MIN, "y_addr_min" },
-	{ SMIAPP_REG_U16_X_ADDR_MAX, "x_addr_max" },
-	{ SMIAPP_REG_U16_Y_ADDR_MAX, "y_addr_max" },
-	{ SMIAPP_REG_U16_MIN_X_OUTPUT_SIZE, "min_x_output_size" }, /* 50 */
-	{ SMIAPP_REG_U16_MIN_Y_OUTPUT_SIZE, "min_y_output_size" },
-	{ SMIAPP_REG_U16_MAX_X_OUTPUT_SIZE, "max_x_output_size" },
-	{ SMIAPP_REG_U16_MAX_Y_OUTPUT_SIZE, "max_y_output_size" },
-	{ SMIAPP_REG_U16_MIN_EVEN_INC, "min_even_inc" },
-	{ SMIAPP_REG_U16_MAX_EVEN_INC, "max_even_inc" }, /* 55 */
-	{ SMIAPP_REG_U16_MIN_ODD_INC, "min_odd_inc" },
-	{ SMIAPP_REG_U16_MAX_ODD_INC, "max_odd_inc" },
-	{ SMIAPP_REG_U16_SCALING_CAPABILITY, "scaling_capability" },
-	{ SMIAPP_REG_U16_SCALER_M_MIN, "scaler_m_min" },
-	{ SMIAPP_REG_U16_SCALER_M_MAX, "scaler_m_max" }, /* 60 */
-	{ SMIAPP_REG_U16_SCALER_N_MIN, "scaler_n_min" },
-	{ SMIAPP_REG_U16_SCALER_N_MAX, "scaler_n_max" },
-	{ SMIAPP_REG_U16_SPATIAL_SAMPLING_CAPABILITY, "spatial_sampling_capability" },
-	{ SMIAPP_REG_U8_DIGITAL_CROP_CAPABILITY, "digital_crop_capability" },
-	{ SMIAPP_REG_U16_COMPRESSION_CAPABILITY, "compression_capability" }, /* 65 */
-	{ SMIAPP_REG_U8_FIFO_SUPPORT_CAPABILITY, "fifo_support_capability" },
-	{ SMIAPP_REG_U8_DPHY_CTRL_CAPABILITY, "dphy_ctrl_capability" },
-	{ SMIAPP_REG_U8_CSI_LANE_MODE_CAPABILITY, "csi_lane_mode_capability" },
-	{ SMIAPP_REG_U8_CSI_SIGNALLING_MODE_CAPABILITY, "csi_signalling_mode_capability" },
-	{ SMIAPP_REG_U8_FAST_STANDBY_CAPABILITY, "fast_standby_capability" }, /* 70 */
-	{ SMIAPP_REG_U8_CCI_ADDRESS_CONTROL_CAPABILITY, "cci_address_control_capability" },
-	{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS, "max_per_lane_bitrate_1_lane_mode_mbps" },
-	{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS, "max_per_lane_bitrate_2_lane_mode_mbps" },
-	{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS, "max_per_lane_bitrate_3_lane_mode_mbps" },
-	{ SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS, "max_per_lane_bitrate_4_lane_mode_mbps" }, /* 75 */
-	{ SMIAPP_REG_U8_TEMP_SENSOR_CAPABILITY, "temp_sensor_capability" },
-	{ SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES_BIN, "min_frame_length_lines_bin" },
-	{ SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES_BIN, "max_frame_length_lines_bin" },
-	{ SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK_BIN, "min_line_length_pck_bin" },
-	{ SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK_BIN, "max_line_length_pck_bin" }, /* 80 */
-	{ SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK_BIN, "min_line_blanking_pck_bin" },
-	{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN_BIN, "fine_integration_time_min_bin" },
-	{ SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN, "fine_integration_time_max_margin_bin" },
-	{ SMIAPP_REG_U8_BINNING_CAPABILITY, "binning_capability" },
-	{ SMIAPP_REG_U8_BINNING_WEIGHTING_CAPABILITY, "binning_weighting_capability" }, /* 85 */
-	{ SMIAPP_REG_U8_DATA_TRANSFER_IF_CAPABILITY, "data_transfer_if_capability" },
-	{ SMIAPP_REG_U8_SHADING_CORRECTION_CAPABILITY, "shading_correction_capability" },
-	{ SMIAPP_REG_U8_GREEN_IMBALANCE_CAPABILITY, "green_imbalance_capability" },
-	{ SMIAPP_REG_U8_BLACK_LEVEL_CAPABILITY, "black_level_capability" },
-	{ SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_CAPABILITY, "module_specific_correction_capability" }, /* 90 */
-	{ SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY, "defect_correction_capability" },
-	{ SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY_2, "defect_correction_capability_2" },
-	{ SMIAPP_REG_U8_EDOF_CAPABILITY, "edof_capability" },
-	{ SMIAPP_REG_U8_COLOUR_FEEDBACK_CAPABILITY, "colour_feedback_capability" },
-	{ SMIAPP_REG_U8_ESTIMATION_MODE_CAPABILITY, "estimation_mode_capability" }, /* 95 */
-	{ SMIAPP_REG_U8_ESTIMATION_ZONE_CAPABILITY, "estimation_zone_capability" },
-	{ SMIAPP_REG_U16_CAPABILITY_TRDY_MIN, "capability_trdy_min" },
-	{ SMIAPP_REG_U8_FLASH_MODE_CAPABILITY, "flash_mode_capability" },
-	{ SMIAPP_REG_U8_ACTUATOR_CAPABILITY, "actuator_capability" },
-	{ SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_1, "bracketing_lut_capability_1" }, /* 100 */
-	{ SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_2, "bracketing_lut_capability_2" },
-	{ SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_STEP, "analogue_gain_code_step" },
-	{ 0, NULL },
-};
diff --git a/drivers/media/video/smiapp/smiapp-limits.h b/drivers/media/video/smiapp/smiapp-limits.h
deleted file mode 100644
index 7f4836bb..0000000
--- a/drivers/media/video/smiapp/smiapp-limits.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * drivers/media/video/smiapp/smiapp-limits.h
- *
- * Generic driver for SMIA/SMIA++ compliant camera modules
- *
- * Copyright (C) 2011--2012 Nokia Corporation
- * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#define SMIAPP_LIMIT_ANALOGUE_GAIN_CAPABILITY			0
-#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN			1
-#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX			2
-#define SMIAPP_LIMIT_THS_ZERO_MIN				3
-#define SMIAPP_LIMIT_TCLK_TRAIL_MIN				4
-#define SMIAPP_LIMIT_INTEGRATION_TIME_CAPABILITY		5
-#define SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MIN		6
-#define SMIAPP_LIMIT_COARSE_INTEGRATION_TIME_MAX_MARGIN		7
-#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN			8
-#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN		9
-#define SMIAPP_LIMIT_DIGITAL_GAIN_CAPABILITY			10
-#define SMIAPP_LIMIT_DIGITAL_GAIN_MIN				11
-#define SMIAPP_LIMIT_DIGITAL_GAIN_MAX				12
-#define SMIAPP_LIMIT_MIN_EXT_CLK_FREQ_HZ			13
-#define SMIAPP_LIMIT_MAX_EXT_CLK_FREQ_HZ			14
-#define SMIAPP_LIMIT_MIN_PRE_PLL_CLK_DIV			15
-#define SMIAPP_LIMIT_MAX_PRE_PLL_CLK_DIV			16
-#define SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ				17
-#define SMIAPP_LIMIT_MAX_PLL_IP_FREQ_HZ				18
-#define SMIAPP_LIMIT_MIN_PLL_MULTIPLIER				19
-#define SMIAPP_LIMIT_MAX_PLL_MULTIPLIER				20
-#define SMIAPP_LIMIT_MIN_PLL_OP_FREQ_HZ				21
-#define SMIAPP_LIMIT_MAX_PLL_OP_FREQ_HZ				22
-#define SMIAPP_LIMIT_MIN_VT_SYS_CLK_DIV				23
-#define SMIAPP_LIMIT_MAX_VT_SYS_CLK_DIV				24
-#define SMIAPP_LIMIT_MIN_VT_SYS_CLK_FREQ_HZ			25
-#define SMIAPP_LIMIT_MAX_VT_SYS_CLK_FREQ_HZ			26
-#define SMIAPP_LIMIT_MIN_VT_PIX_CLK_FREQ_HZ			27
-#define SMIAPP_LIMIT_MAX_VT_PIX_CLK_FREQ_HZ			28
-#define SMIAPP_LIMIT_MIN_VT_PIX_CLK_DIV				29
-#define SMIAPP_LIMIT_MAX_VT_PIX_CLK_DIV				30
-#define SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES			31
-#define SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES			32
-#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK			33
-#define SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK			34
-#define SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK			35
-#define SMIAPP_LIMIT_MIN_FRAME_BLANKING_LINES			36
-#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_STEP_SIZE		37
-#define SMIAPP_LIMIT_MIN_OP_SYS_CLK_DIV				38
-#define SMIAPP_LIMIT_MAX_OP_SYS_CLK_DIV				39
-#define SMIAPP_LIMIT_MIN_OP_SYS_CLK_FREQ_HZ			40
-#define SMIAPP_LIMIT_MAX_OP_SYS_CLK_FREQ_HZ			41
-#define SMIAPP_LIMIT_MIN_OP_PIX_CLK_DIV				42
-#define SMIAPP_LIMIT_MAX_OP_PIX_CLK_DIV				43
-#define SMIAPP_LIMIT_MIN_OP_PIX_CLK_FREQ_HZ			44
-#define SMIAPP_LIMIT_MAX_OP_PIX_CLK_FREQ_HZ			45
-#define SMIAPP_LIMIT_X_ADDR_MIN					46
-#define SMIAPP_LIMIT_Y_ADDR_MIN					47
-#define SMIAPP_LIMIT_X_ADDR_MAX					48
-#define SMIAPP_LIMIT_Y_ADDR_MAX					49
-#define SMIAPP_LIMIT_MIN_X_OUTPUT_SIZE				50
-#define SMIAPP_LIMIT_MIN_Y_OUTPUT_SIZE				51
-#define SMIAPP_LIMIT_MAX_X_OUTPUT_SIZE				52
-#define SMIAPP_LIMIT_MAX_Y_OUTPUT_SIZE				53
-#define SMIAPP_LIMIT_MIN_EVEN_INC				54
-#define SMIAPP_LIMIT_MAX_EVEN_INC				55
-#define SMIAPP_LIMIT_MIN_ODD_INC				56
-#define SMIAPP_LIMIT_MAX_ODD_INC				57
-#define SMIAPP_LIMIT_SCALING_CAPABILITY				58
-#define SMIAPP_LIMIT_SCALER_M_MIN				59
-#define SMIAPP_LIMIT_SCALER_M_MAX				60
-#define SMIAPP_LIMIT_SCALER_N_MIN				61
-#define SMIAPP_LIMIT_SCALER_N_MAX				62
-#define SMIAPP_LIMIT_SPATIAL_SAMPLING_CAPABILITY		63
-#define SMIAPP_LIMIT_DIGITAL_CROP_CAPABILITY			64
-#define SMIAPP_LIMIT_COMPRESSION_CAPABILITY			65
-#define SMIAPP_LIMIT_FIFO_SUPPORT_CAPABILITY			66
-#define SMIAPP_LIMIT_DPHY_CTRL_CAPABILITY			67
-#define SMIAPP_LIMIT_CSI_LANE_MODE_CAPABILITY			68
-#define SMIAPP_LIMIT_CSI_SIGNALLING_MODE_CAPABILITY		69
-#define SMIAPP_LIMIT_FAST_STANDBY_CAPABILITY			70
-#define SMIAPP_LIMIT_CCI_ADDRESS_CONTROL_CAPABILITY		71
-#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS	72
-#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS	73
-#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS	74
-#define SMIAPP_LIMIT_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS	75
-#define SMIAPP_LIMIT_TEMP_SENSOR_CAPABILITY			76
-#define SMIAPP_LIMIT_MIN_FRAME_LENGTH_LINES_BIN			77
-#define SMIAPP_LIMIT_MAX_FRAME_LENGTH_LINES_BIN			78
-#define SMIAPP_LIMIT_MIN_LINE_LENGTH_PCK_BIN			79
-#define SMIAPP_LIMIT_MAX_LINE_LENGTH_PCK_BIN			80
-#define SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN			81
-#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MIN_BIN		82
-#define SMIAPP_LIMIT_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN	83
-#define SMIAPP_LIMIT_BINNING_CAPABILITY				84
-#define SMIAPP_LIMIT_BINNING_WEIGHTING_CAPABILITY		85
-#define SMIAPP_LIMIT_DATA_TRANSFER_IF_CAPABILITY		86
-#define SMIAPP_LIMIT_SHADING_CORRECTION_CAPABILITY		87
-#define SMIAPP_LIMIT_GREEN_IMBALANCE_CAPABILITY			88
-#define SMIAPP_LIMIT_BLACK_LEVEL_CAPABILITY			89
-#define SMIAPP_LIMIT_MODULE_SPECIFIC_CORRECTION_CAPABILITY	90
-#define SMIAPP_LIMIT_DEFECT_CORRECTION_CAPABILITY		91
-#define SMIAPP_LIMIT_DEFECT_CORRECTION_CAPABILITY_2		92
-#define SMIAPP_LIMIT_EDOF_CAPABILITY				93
-#define SMIAPP_LIMIT_COLOUR_FEEDBACK_CAPABILITY			94
-#define SMIAPP_LIMIT_ESTIMATION_MODE_CAPABILITY			95
-#define SMIAPP_LIMIT_ESTIMATION_ZONE_CAPABILITY			96
-#define SMIAPP_LIMIT_CAPABILITY_TRDY_MIN			97
-#define SMIAPP_LIMIT_FLASH_MODE_CAPABILITY			98
-#define SMIAPP_LIMIT_ACTUATOR_CAPABILITY			99
-#define SMIAPP_LIMIT_BRACKETING_LUT_CAPABILITY_1		100
-#define SMIAPP_LIMIT_BRACKETING_LUT_CAPABILITY_2		101
-#define SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_STEP			102
-#define SMIAPP_LIMIT_LAST					103
diff --git a/drivers/media/video/smiapp/smiapp-quirk.c b/drivers/media/video/smiapp/smiapp-quirk.c
deleted file mode 100644
index 55e8795..0000000
--- a/drivers/media/video/smiapp/smiapp-quirk.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * drivers/media/video/smiapp/smiapp-quirk.c
- *
- * Generic driver for SMIA/SMIA++ compliant camera modules
- *
- * Copyright (C) 2011--2012 Nokia Corporation
- * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/delay.h>
-
-#include "smiapp.h"
-
-static int smiapp_write_8(struct smiapp_sensor *sensor, u16 reg, u8 val)
-{
-	return smiapp_write(sensor, (SMIA_REG_8BIT << 16) | reg, val);
-}
-
-static int smiapp_write_8s(struct smiapp_sensor *sensor,
-			   struct smiapp_reg_8 *regs, int len)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
-	int rval;
-
-	for (; len > 0; len--, regs++) {
-		rval = smiapp_write_8(sensor, regs->reg, regs->val);
-		if (rval < 0) {
-			dev_err(&client->dev,
-				"error %d writing reg 0x%4.4x, val 0x%2.2x",
-				rval, regs->reg, regs->val);
-			return rval;
-		}
-	}
-
-	return 0;
-}
-
-void smiapp_replace_limit(struct smiapp_sensor *sensor,
-			  u32 limit, u32 val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
-
-	dev_dbg(&client->dev, "quirk: 0x%8.8x \"%s\" = %d, 0x%x\n",
-		smiapp_reg_limits[limit].addr,
-		smiapp_reg_limits[limit].what, val, val);
-	sensor->limits[limit] = val;
-}
-
-int smiapp_replace_limit_at(struct smiapp_sensor *sensor,
-			    u32 reg, u32 val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
-	int i;
-
-	for (i = 0; smiapp_reg_limits[i].addr; i++) {
-		if ((smiapp_reg_limits[i].addr & 0xffff) != reg)
-			continue;
-
-		smiapp_replace_limit(sensor, i, val);
-
-		return 0;
-	}
-
-	dev_dbg(&client->dev, "quirk: bad register 0x%4.4x\n", reg);
-
-	return -EINVAL;
-}
-
-bool smiapp_quirk_reg(struct smiapp_sensor *sensor,
-		      u32 reg, u32 *val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
-	const struct smia_reg *sreg;
-
-	if (!sensor->minfo.quirk)
-		return false;
-
-	sreg = sensor->minfo.quirk->regs;
-
-	if (!sreg)
-		return false;
-
-	while (sreg->type) {
-		u16 type = reg >> 16;
-		u16 reg16 = reg;
-
-		if (sreg->type != type || sreg->reg != reg16) {
-			sreg++;
-			continue;
-		}
-
-		switch ((u8)type) {
-		case SMIA_REG_8BIT:
-			dev_dbg(&client->dev, "quirk: 0x%8.8x: 0x%2.2x\n",
-				reg, sreg->val);
-			break;
-		case SMIA_REG_16BIT:
-			dev_dbg(&client->dev, "quirk: 0x%8.8x: 0x%4.4x\n",
-				reg, sreg->val);
-			break;
-		case SMIA_REG_32BIT:
-			dev_dbg(&client->dev, "quirk: 0x%8.8x: 0x%8.8x\n",
-				reg, sreg->val);
-			break;
-		}
-
-		*val = sreg->val;
-
-		return true;
-	}
-
-	return false;
-}
-
-static int jt8ew9_limits(struct smiapp_sensor *sensor)
-{
-	if (sensor->minfo.revision_number_major < 0x03)
-		sensor->frame_skip = 1;
-
-	/* Below 24 gain doesn't have effect at all, */
-	/* but ~59 is needed for full dynamic range */
-	smiapp_replace_limit(sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MIN, 59);
-	smiapp_replace_limit(
-		sensor, SMIAPP_LIMIT_ANALOGUE_GAIN_CODE_MAX, 6000);
-
-	return 0;
-}
-
-static int jt8ew9_post_poweron(struct smiapp_sensor *sensor)
-{
-	struct smiapp_reg_8 regs[] = {
-		{ 0x30a3, 0xd8 }, /* Output port control : LVDS ports only */
-		{ 0x30ae, 0x00 }, /* 0x0307 pll_multiplier maximum value on PLL input 9.6MHz ( 19.2MHz is divided on pre_pll_div) */
-		{ 0x30af, 0xd0 }, /* 0x0307 pll_multiplier maximum value on PLL input 9.6MHz ( 19.2MHz is divided on pre_pll_div) */
-		{ 0x322d, 0x04 }, /* Adjusting Processing Image Size to Scaler Toshiba Recommendation Setting */
-		{ 0x3255, 0x0f }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
-		{ 0x3256, 0x15 }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
-		{ 0x3258, 0x70 }, /* Analog Gain Control Toshiba Recommendation Setting */
-		{ 0x3259, 0x70 }, /* Analog Gain Control Toshiba Recommendation Setting */
-		{ 0x325f, 0x7c }, /* Analog Gain Control Toshiba Recommendation Setting */
-		{ 0x3302, 0x06 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
-		{ 0x3304, 0x00 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
-		{ 0x3307, 0x22 }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
-		{ 0x3308, 0x8d }, /* Pixel Reference Voltage Control Toshiba Recommendation Setting */
-		{ 0x331e, 0x0f }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
-		{ 0x3320, 0x30 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
-		{ 0x3321, 0x11 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
-		{ 0x3322, 0x98 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
-		{ 0x3323, 0x64 }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
-		{ 0x3325, 0x83 }, /* Read Out Timing Control Toshiba Recommendation Setting */
-		{ 0x3330, 0x18 }, /* Read Out Timing Control Toshiba Recommendation Setting */
-		{ 0x333c, 0x01 }, /* Read Out Timing Control Toshiba Recommendation Setting */
-		{ 0x3345, 0x2f }, /* Black Hole Sun Correction Control Toshiba Recommendation Setting */
-		{ 0x33de, 0x38 }, /* Horizontal Noise Reduction Control Toshiba Recommendation Setting */
-		/* Taken from v03. No idea what the rest are. */
-		{ 0x32e0, 0x05 },
-		{ 0x32e1, 0x05 },
-		{ 0x32e2, 0x04 },
-		{ 0x32e5, 0x04 },
-		{ 0x32e6, 0x04 },
-
-	};
-
-	return smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
-}
-
-const struct smiapp_quirk smiapp_jt8ew9_quirk = {
-	.limits = jt8ew9_limits,
-	.post_poweron = jt8ew9_post_poweron,
-};
-
-static int imx125es_post_poweron(struct smiapp_sensor *sensor)
-{
-	/* Taken from v02. No idea what the other two are. */
-	struct smiapp_reg_8 regs[] = {
-		/*
-		 * 0x3302: clk during frame blanking:
-		 * 0x00 - HS mode, 0x01 - LP11
-		 */
-		{ 0x3302, 0x01 },
-		{ 0x302d, 0x00 },
-		{ 0x3b08, 0x8c },
-	};
-
-	return smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
-}
-
-const struct smiapp_quirk smiapp_imx125es_quirk = {
-	.post_poweron = imx125es_post_poweron,
-};
-
-static int jt8ev1_limits(struct smiapp_sensor *sensor)
-{
-	smiapp_replace_limit(sensor, SMIAPP_LIMIT_X_ADDR_MAX, 4271);
-	smiapp_replace_limit(sensor,
-			     SMIAPP_LIMIT_MIN_LINE_BLANKING_PCK_BIN, 184);
-
-	return 0;
-}
-
-static int jt8ev1_post_poweron(struct smiapp_sensor *sensor)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
-	int rval;
-
-	struct smiapp_reg_8 regs[] = {
-		{ 0x3031, 0xcd }, /* For digital binning (EQ_MONI) */
-		{ 0x30a3, 0xd0 }, /* FLASH STROBE enable */
-		{ 0x3237, 0x00 }, /* For control of pulse timing for ADC */
-		{ 0x3238, 0x43 },
-		{ 0x3301, 0x06 }, /* For analog bias for sensor */
-		{ 0x3302, 0x06 },
-		{ 0x3304, 0x00 },
-		{ 0x3305, 0x88 },
-		{ 0x332a, 0x14 },
-		{ 0x332c, 0x6b },
-		{ 0x3336, 0x01 },
-		{ 0x333f, 0x1f },
-		{ 0x3355, 0x00 },
-		{ 0x3356, 0x20 },
-		{ 0x33bf, 0x20 }, /* Adjust the FBC speed */
-		{ 0x33c9, 0x20 },
-		{ 0x33ce, 0x30 }, /* Adjust the parameter for logic function */
-		{ 0x33cf, 0xec }, /* For Black sun */
-		{ 0x3328, 0x80 }, /* Ugh. No idea what's this. */
-	};
-
-	struct smiapp_reg_8 regs_96[] = {
-		{ 0x30ae, 0x00 }, /* For control of ADC clock */
-		{ 0x30af, 0xd0 },
-		{ 0x30b0, 0x01 },
-	};
-
-	rval = smiapp_write_8s(sensor, regs, ARRAY_SIZE(regs));
-	if (rval < 0)
-		return rval;
-
-	switch (sensor->platform_data->ext_clk) {
-	case 9600000:
-		return smiapp_write_8s(sensor, regs_96,
-				       ARRAY_SIZE(regs_96));
-	default:
-		dev_warn(&client->dev, "no MSRs for %d Hz ext_clk\n",
-			 sensor->platform_data->ext_clk);
-		return 0;
-	}
-}
-
-static int jt8ev1_pre_streamon(struct smiapp_sensor *sensor)
-{
-	return smiapp_write_8(sensor, 0x3328, 0x00);
-}
-
-static int jt8ev1_post_streamoff(struct smiapp_sensor *sensor)
-{
-	int rval;
-
-	/* Workaround: allows fast standby to work properly */
-	rval = smiapp_write_8(sensor, 0x3205, 0x04);
-	if (rval < 0)
-		return rval;
-
-	/* Wait for 1 ms + one line => 2 ms is likely enough */
-	usleep_range(2000, 2000);
-
-	/* Restore it */
-	rval = smiapp_write_8(sensor, 0x3205, 0x00);
-	if (rval < 0)
-		return rval;
-
-	return smiapp_write_8(sensor, 0x3328, 0x80);
-}
-
-const struct smiapp_quirk smiapp_jt8ev1_quirk = {
-	.limits = jt8ev1_limits,
-	.post_poweron = jt8ev1_post_poweron,
-	.pre_streamon = jt8ev1_pre_streamon,
-	.post_streamoff = jt8ev1_post_streamoff,
-	.flags = SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE,
-};
-
-static int tcm8500md_limits(struct smiapp_sensor *sensor)
-{
-	smiapp_replace_limit(sensor, SMIAPP_LIMIT_MIN_PLL_IP_FREQ_HZ, 2700000);
-
-	return 0;
-}
-
-const struct smiapp_quirk smiapp_tcm8500md_quirk = {
-	.limits = tcm8500md_limits,
-};
diff --git a/drivers/media/video/smiapp/smiapp-quirk.h b/drivers/media/video/smiapp/smiapp-quirk.h
deleted file mode 100644
index f4dcaab..0000000
--- a/drivers/media/video/smiapp/smiapp-quirk.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * drivers/media/video/smiapp/smiapp-quirk.h
- *
- * Generic driver for SMIA/SMIA++ compliant camera modules
- *
- * Copyright (C) 2011--2012 Nokia Corporation
- * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __SMIAPP_QUIRK__
-#define __SMIAPP_QUIRK__
-
-struct smiapp_sensor;
-
-/**
- * struct smiapp_quirk - quirks for sensors that deviate from SMIA++ standard
- *
- * @limits: Replace sensor->limits with values which can't be read from
- *	    sensor registers. Called the first time the sensor is powered up.
- * @post_poweron: Called always after the sensor has been fully powered on.
- * @pre_streamon: Called just before streaming is enabled.
- * @post_streamon: Called right after stopping streaming.
- */
-struct smiapp_quirk {
-	int (*limits)(struct smiapp_sensor *sensor);
-	int (*post_poweron)(struct smiapp_sensor *sensor);
-	int (*pre_streamon)(struct smiapp_sensor *sensor);
-	int (*post_streamoff)(struct smiapp_sensor *sensor);
-	const struct smia_reg *regs;
-	unsigned long flags;
-};
-
-/* op pix clock is for all lanes in total normally */
-#define SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE			(1 << 0)
-#define SMIAPP_QUIRK_FLAG_8BIT_READ_ONLY			(1 << 1)
-
-struct smiapp_reg_8 {
-	u16 reg;
-	u8 val;
-};
-
-void smiapp_replace_limit(struct smiapp_sensor *sensor,
-			  u32 limit, u32 val);
-bool smiapp_quirk_reg(struct smiapp_sensor *sensor,
-		      u32 reg, u32 *val);
-
-#define SMIAPP_MK_QUIRK_REG(_reg, _val) \
-	{				\
-		.type = (_reg >> 16),	\
-		.reg = (u16)_reg,	\
-		.val = _val,		\
-	}
-
-#define smiapp_call_quirk(_sensor, _quirk, ...)				\
-	(_sensor->minfo.quirk &&					\
-	 _sensor->minfo.quirk->_quirk ?					\
-	 _sensor->minfo.quirk->_quirk(_sensor, ##__VA_ARGS__) : 0)
-
-#define smiapp_needs_quirk(_sensor, _quirk)		\
-	(_sensor->minfo.quirk ?				\
-	 _sensor->minfo.quirk->flags & _quirk : 0)
-
-extern const struct smiapp_quirk smiapp_jt8ev1_quirk;
-extern const struct smiapp_quirk smiapp_imx125es_quirk;
-extern const struct smiapp_quirk smiapp_jt8ew9_quirk;
-extern const struct smiapp_quirk smiapp_tcm8500md_quirk;
-
-#endif /* __SMIAPP_QUIRK__ */
diff --git a/drivers/media/video/smiapp/smiapp-reg-defs.h b/drivers/media/video/smiapp/smiapp-reg-defs.h
deleted file mode 100644
index a089eb8..0000000
--- a/drivers/media/video/smiapp/smiapp-reg-defs.h
+++ /dev/null
@@ -1,503 +0,0 @@
-/*
- * drivers/media/video/smiapp/smiapp-reg-defs.h
- *
- * Generic driver for SMIA/SMIA++ compliant camera modules
- *
- * Copyright (C) 2011--2012 Nokia Corporation
- * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-#define SMIAPP_REG_MK_U8(r) ((SMIA_REG_8BIT << 16) | (r))
-#define SMIAPP_REG_MK_U16(r) ((SMIA_REG_16BIT << 16) | (r))
-#define SMIAPP_REG_MK_U32(r) ((SMIA_REG_32BIT << 16) | (r))
-
-#define SMIAPP_REG_MK_F32(r) (SMIA_REG_FLAG_FLOAT | (SMIA_REG_32BIT << 16) | (r))
-
-#define SMIAPP_REG_U16_MODEL_ID					SMIAPP_REG_MK_U16(0x0000)
-#define SMIAPP_REG_U8_REVISION_NUMBER_MAJOR			SMIAPP_REG_MK_U8(0x0002)
-#define SMIAPP_REG_U8_MANUFACTURER_ID				SMIAPP_REG_MK_U8(0x0003)
-#define SMIAPP_REG_U8_SMIA_VERSION				SMIAPP_REG_MK_U8(0x0004)
-#define SMIAPP_REG_U8_FRAME_COUNT				SMIAPP_REG_MK_U8(0x0005)
-#define SMIAPP_REG_U8_PIXEL_ORDER				SMIAPP_REG_MK_U8(0x0006)
-#define SMIAPP_REG_U16_DATA_PEDESTAL				SMIAPP_REG_MK_U16(0x0008)
-#define SMIAPP_REG_U8_PIXEL_DEPTH				SMIAPP_REG_MK_U8(0x000c)
-#define SMIAPP_REG_U8_REVISION_NUMBER_MINOR			SMIAPP_REG_MK_U8(0x0010)
-#define SMIAPP_REG_U8_SMIAPP_VERSION				SMIAPP_REG_MK_U8(0x0011)
-#define SMIAPP_REG_U8_MODULE_DATE_YEAR				SMIAPP_REG_MK_U8(0x0012)
-#define SMIAPP_REG_U8_MODULE_DATE_MONTH				SMIAPP_REG_MK_U8(0x0013)
-#define SMIAPP_REG_U8_MODULE_DATE_DAY				SMIAPP_REG_MK_U8(0x0014)
-#define SMIAPP_REG_U8_MODULE_DATE_PHASE				SMIAPP_REG_MK_U8(0x0015)
-#define SMIAPP_REG_U16_SENSOR_MODEL_ID				SMIAPP_REG_MK_U16(0x0016)
-#define SMIAPP_REG_U8_SENSOR_REVISION_NUMBER			SMIAPP_REG_MK_U8(0x0018)
-#define SMIAPP_REG_U8_SENSOR_MANUFACTURER_ID			SMIAPP_REG_MK_U8(0x0019)
-#define SMIAPP_REG_U8_SENSOR_FIRMWARE_VERSION			SMIAPP_REG_MK_U8(0x001a)
-#define SMIAPP_REG_U32_SERIAL_NUMBER				SMIAPP_REG_MK_U32(0x001c)
-#define SMIAPP_REG_U8_FRAME_FORMAT_MODEL_TYPE			SMIAPP_REG_MK_U8(0x0040)
-#define SMIAPP_REG_U8_FRAME_FORMAT_MODEL_SUBTYPE		SMIAPP_REG_MK_U8(0x0041)
-#define SMIAPP_REG_U16_FRAME_FORMAT_DESCRIPTOR_2(n)		SMIAPP_REG_MK_U16(0x0042 + ((n) << 1)) /* 0 <= n <= 14 */
-#define SMIAPP_REG_U32_FRAME_FORMAT_DESCRIPTOR_4(n)		SMIAPP_REG_MK_U32(0x0060 + ((n) << 2)) /* 0 <= n <= 7 */
-#define SMIAPP_REG_U16_ANALOGUE_GAIN_CAPABILITY			SMIAPP_REG_MK_U16(0x0080)
-#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MIN			SMIAPP_REG_MK_U16(0x0084)
-#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_MAX			SMIAPP_REG_MK_U16(0x0086)
-#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_STEP			SMIAPP_REG_MK_U16(0x0088)
-#define SMIAPP_REG_U16_ANALOGUE_GAIN_TYPE			SMIAPP_REG_MK_U16(0x008a)
-#define SMIAPP_REG_U16_ANALOGUE_GAIN_M0				SMIAPP_REG_MK_U16(0x008c)
-#define SMIAPP_REG_U16_ANALOGUE_GAIN_C0				SMIAPP_REG_MK_U16(0x008e)
-#define SMIAPP_REG_U16_ANALOGUE_GAIN_M1				SMIAPP_REG_MK_U16(0x0090)
-#define SMIAPP_REG_U16_ANALOGUE_GAIN_C1				SMIAPP_REG_MK_U16(0x0092)
-#define SMIAPP_REG_U8_DATA_FORMAT_MODEL_TYPE			SMIAPP_REG_MK_U8(0x00c0)
-#define SMIAPP_REG_U8_DATA_FORMAT_MODEL_SUBTYPE			SMIAPP_REG_MK_U8(0x00c1)
-#define SMIAPP_REG_U16_DATA_FORMAT_DESCRIPTOR(n)		SMIAPP_REG_MK_U16(0x00c2 + ((n) << 1))
-#define SMIAPP_REG_U8_MODE_SELECT				SMIAPP_REG_MK_U8(0x0100)
-#define SMIAPP_REG_U8_IMAGE_ORIENTATION				SMIAPP_REG_MK_U8(0x0101)
-#define SMIAPP_REG_U8_SOFTWARE_RESET				SMIAPP_REG_MK_U8(0x0103)
-#define SMIAPP_REG_U8_GROUPED_PARAMETER_HOLD			SMIAPP_REG_MK_U8(0x0104)
-#define SMIAPP_REG_U8_MASK_CORRUPTED_FRAMES			SMIAPP_REG_MK_U8(0x0105)
-#define SMIAPP_REG_U8_FAST_STANDBY_CTRL				SMIAPP_REG_MK_U8(0x0106)
-#define SMIAPP_REG_U8_CCI_ADDRESS_CONTROL			SMIAPP_REG_MK_U8(0x0107)
-#define SMIAPP_REG_U8_2ND_CCI_IF_CONTROL			SMIAPP_REG_MK_U8(0x0108)
-#define SMIAPP_REG_U8_2ND_CCI_ADDRESS_CONTROL			SMIAPP_REG_MK_U8(0x0109)
-#define SMIAPP_REG_U8_CSI_CHANNEL_IDENTIFIER			SMIAPP_REG_MK_U8(0x0110)
-#define SMIAPP_REG_U8_CSI_SIGNALLING_MODE			SMIAPP_REG_MK_U8(0x0111)
-#define SMIAPP_REG_U16_CSI_DATA_FORMAT				SMIAPP_REG_MK_U16(0x0112)
-#define SMIAPP_REG_U8_CSI_LANE_MODE				SMIAPP_REG_MK_U8(0x0114)
-#define SMIAPP_REG_U8_CSI2_10_TO_8_DT				SMIAPP_REG_MK_U8(0x0115)
-#define SMIAPP_REG_U8_CSI2_10_TO_7_DT				SMIAPP_REG_MK_U8(0x0116)
-#define SMIAPP_REG_U8_CSI2_10_TO_6_DT				SMIAPP_REG_MK_U8(0x0117)
-#define SMIAPP_REG_U8_CSI2_12_TO_8_DT				SMIAPP_REG_MK_U8(0x0118)
-#define SMIAPP_REG_U8_CSI2_12_TO_7_DT				SMIAPP_REG_MK_U8(0x0119)
-#define SMIAPP_REG_U8_CSI2_12_TO_6_DT				SMIAPP_REG_MK_U8(0x011a)
-#define SMIAPP_REG_U8_CSI2_14_TO_10_DT				SMIAPP_REG_MK_U8(0x011b)
-#define SMIAPP_REG_U8_CSI2_14_TO_8_DT				SMIAPP_REG_MK_U8(0x011c)
-#define SMIAPP_REG_U8_CSI2_16_TO_10_DT				SMIAPP_REG_MK_U8(0x011d)
-#define SMIAPP_REG_U8_CSI2_16_TO_8_DT				SMIAPP_REG_MK_U8(0x011e)
-#define SMIAPP_REG_U8_GAIN_MODE					SMIAPP_REG_MK_U8(0x0120)
-#define SMIAPP_REG_U16_VANA_VOLTAGE				SMIAPP_REG_MK_U16(0x0130)
-#define SMIAPP_REG_U16_VDIG_VOLTAGE				SMIAPP_REG_MK_U16(0x0132)
-#define SMIAPP_REG_U16_VIO_VOLTAGE				SMIAPP_REG_MK_U16(0x0134)
-#define SMIAPP_REG_U16_EXTCLK_FREQUENCY_MHZ			SMIAPP_REG_MK_U16(0x0136)
-#define SMIAPP_REG_U8_TEMP_SENSOR_CONTROL			SMIAPP_REG_MK_U8(0x0138)
-#define SMIAPP_REG_U8_TEMP_SENSOR_MODE				SMIAPP_REG_MK_U8(0x0139)
-#define SMIAPP_REG_U8_TEMP_SENSOR_OUTPUT			SMIAPP_REG_MK_U8(0x013a)
-#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME			SMIAPP_REG_MK_U16(0x0200)
-#define SMIAPP_REG_U16_COARSE_INTEGRATION_TIME			SMIAPP_REG_MK_U16(0x0202)
-#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GLOBAL		SMIAPP_REG_MK_U16(0x0204)
-#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GREENR		SMIAPP_REG_MK_U16(0x0206)
-#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_RED			SMIAPP_REG_MK_U16(0x0208)
-#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_BLUE			SMIAPP_REG_MK_U16(0x020a)
-#define SMIAPP_REG_U16_ANALOGUE_GAIN_CODE_GREENB		SMIAPP_REG_MK_U16(0x020c)
-#define SMIAPP_REG_U16_DIGITAL_GAIN_GREENR			SMIAPP_REG_MK_U16(0x020e)
-#define SMIAPP_REG_U16_DIGITAL_GAIN_RED				SMIAPP_REG_MK_U16(0x0210)
-#define SMIAPP_REG_U16_DIGITAL_GAIN_BLUE			SMIAPP_REG_MK_U16(0x0212)
-#define SMIAPP_REG_U16_DIGITAL_GAIN_GREENB			SMIAPP_REG_MK_U16(0x0214)
-#define SMIAPP_REG_U16_VT_PIX_CLK_DIV				SMIAPP_REG_MK_U16(0x0300)
-#define SMIAPP_REG_U16_VT_SYS_CLK_DIV				SMIAPP_REG_MK_U16(0x0302)
-#define SMIAPP_REG_U16_PRE_PLL_CLK_DIV				SMIAPP_REG_MK_U16(0x0304)
-#define SMIAPP_REG_U16_PLL_MULTIPLIER				SMIAPP_REG_MK_U16(0x0306)
-#define SMIAPP_REG_U16_OP_PIX_CLK_DIV				SMIAPP_REG_MK_U16(0x0308)
-#define SMIAPP_REG_U16_OP_SYS_CLK_DIV				SMIAPP_REG_MK_U16(0x030a)
-#define SMIAPP_REG_U16_FRAME_LENGTH_LINES			SMIAPP_REG_MK_U16(0x0340)
-#define SMIAPP_REG_U16_LINE_LENGTH_PCK				SMIAPP_REG_MK_U16(0x0342)
-#define SMIAPP_REG_U16_X_ADDR_START				SMIAPP_REG_MK_U16(0x0344)
-#define SMIAPP_REG_U16_Y_ADDR_START				SMIAPP_REG_MK_U16(0x0346)
-#define SMIAPP_REG_U16_X_ADDR_END				SMIAPP_REG_MK_U16(0x0348)
-#define SMIAPP_REG_U16_Y_ADDR_END				SMIAPP_REG_MK_U16(0x034a)
-#define SMIAPP_REG_U16_X_OUTPUT_SIZE				SMIAPP_REG_MK_U16(0x034c)
-#define SMIAPP_REG_U16_Y_OUTPUT_SIZE				SMIAPP_REG_MK_U16(0x034e)
-#define SMIAPP_REG_U16_X_EVEN_INC				SMIAPP_REG_MK_U16(0x0380)
-#define SMIAPP_REG_U16_X_ODD_INC				SMIAPP_REG_MK_U16(0x0382)
-#define SMIAPP_REG_U16_Y_EVEN_INC				SMIAPP_REG_MK_U16(0x0384)
-#define SMIAPP_REG_U16_Y_ODD_INC				SMIAPP_REG_MK_U16(0x0386)
-#define SMIAPP_REG_U16_SCALING_MODE				SMIAPP_REG_MK_U16(0x0400)
-#define SMIAPP_REG_U16_SPATIAL_SAMPLING				SMIAPP_REG_MK_U16(0x0402)
-#define SMIAPP_REG_U16_SCALE_M					SMIAPP_REG_MK_U16(0x0404)
-#define SMIAPP_REG_U16_SCALE_N					SMIAPP_REG_MK_U16(0x0406)
-#define SMIAPP_REG_U16_DIGITAL_CROP_X_OFFSET			SMIAPP_REG_MK_U16(0x0408)
-#define SMIAPP_REG_U16_DIGITAL_CROP_Y_OFFSET			SMIAPP_REG_MK_U16(0x040a)
-#define SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_WIDTH			SMIAPP_REG_MK_U16(0x040c)
-#define SMIAPP_REG_U16_DIGITAL_CROP_IMAGE_HEIGHT		SMIAPP_REG_MK_U16(0x040e)
-#define SMIAPP_REG_U16_COMPRESSION_MODE				SMIAPP_REG_MK_U16(0x0500)
-#define SMIAPP_REG_U16_TEST_PATTERN_MODE			SMIAPP_REG_MK_U16(0x0600)
-#define SMIAPP_REG_U16_TEST_DATA_RED				SMIAPP_REG_MK_U16(0x0602)
-#define SMIAPP_REG_U16_TEST_DATA_GREENR				SMIAPP_REG_MK_U16(0x0604)
-#define SMIAPP_REG_U16_TEST_DATA_BLUE				SMIAPP_REG_MK_U16(0x0606)
-#define SMIAPP_REG_U16_TEST_DATA_GREENB				SMIAPP_REG_MK_U16(0x0608)
-#define SMIAPP_REG_U16_HORIZONTAL_CURSOR_WIDTH			SMIAPP_REG_MK_U16(0x060a)
-#define SMIAPP_REG_U16_HORIZONTAL_CURSOR_POSITION		SMIAPP_REG_MK_U16(0x060c)
-#define SMIAPP_REG_U16_VERTICAL_CURSOR_WIDTH			SMIAPP_REG_MK_U16(0x060e)
-#define SMIAPP_REG_U16_VERTICAL_CURSOR_POSITION			SMIAPP_REG_MK_U16(0x0610)
-#define SMIAPP_REG_U16_FIFO_WATER_MARK_PIXELS			SMIAPP_REG_MK_U16(0x0700)
-#define SMIAPP_REG_U8_TCLK_POST					SMIAPP_REG_MK_U8(0x0800)
-#define SMIAPP_REG_U8_THS_PREPARE				SMIAPP_REG_MK_U8(0x0801)
-#define SMIAPP_REG_U8_THS_ZERO_MIN				SMIAPP_REG_MK_U8(0x0802)
-#define SMIAPP_REG_U8_THS_TRAIL					SMIAPP_REG_MK_U8(0x0803)
-#define SMIAPP_REG_U8_TCLK_TRAIL_MIN				SMIAPP_REG_MK_U8(0x0804)
-#define SMIAPP_REG_U8_TCLK_PREPARE				SMIAPP_REG_MK_U8(0x0805)
-#define SMIAPP_REG_U8_TCLK_ZERO					SMIAPP_REG_MK_U8(0x0806)
-#define SMIAPP_REG_U8_TLPX					SMIAPP_REG_MK_U8(0x0807)
-#define SMIAPP_REG_U8_DPHY_CTRL					SMIAPP_REG_MK_U8(0x0808)
-#define SMIAPP_REG_U32_REQUESTED_LINK_BIT_RATE_MBPS		SMIAPP_REG_MK_U32(0x0820)
-#define SMIAPP_REG_U8_BINNING_MODE				SMIAPP_REG_MK_U8(0x0900)
-#define SMIAPP_REG_U8_BINNING_TYPE				SMIAPP_REG_MK_U8(0x0901)
-#define SMIAPP_REG_U8_BINNING_WEIGHTING				SMIAPP_REG_MK_U8(0x0902)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_CTRL			SMIAPP_REG_MK_U8(0x0a00)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_STATUS			SMIAPP_REG_MK_U8(0x0a01)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_PAGE_SELECT		SMIAPP_REG_MK_U8(0x0a02)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_0			SMIAPP_REG_MK_U8(0x0a04)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_1			SMIAPP_REG_MK_U8(0x0a05)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_2			SMIAPP_REG_MK_U8(0x0a06)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_3			SMIAPP_REG_MK_U8(0x0a07)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_4			SMIAPP_REG_MK_U8(0x0a08)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_5			SMIAPP_REG_MK_U8(0x0a09)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_12		SMIAPP_REG_MK_U8(0x0a10)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_13		SMIAPP_REG_MK_U8(0x0a11)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_14		SMIAPP_REG_MK_U8(0x0a12)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_15		SMIAPP_REG_MK_U8(0x0a13)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_16		SMIAPP_REG_MK_U8(0x0a14)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_17		SMIAPP_REG_MK_U8(0x0a15)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_18		SMIAPP_REG_MK_U8(0x0a16)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_19		SMIAPP_REG_MK_U8(0x0a17)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_20		SMIAPP_REG_MK_U8(0x0a18)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_21		SMIAPP_REG_MK_U8(0x0a19)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_22		SMIAPP_REG_MK_U8(0x0a1a)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_23		SMIAPP_REG_MK_U8(0x0a1b)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_24		SMIAPP_REG_MK_U8(0x0a1c)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_25		SMIAPP_REG_MK_U8(0x0a1d)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_26		SMIAPP_REG_MK_U8(0x0a1e)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_27		SMIAPP_REG_MK_U8(0x0a1f)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_28		SMIAPP_REG_MK_U8(0x0a20)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_29		SMIAPP_REG_MK_U8(0x0a21)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_30		SMIAPP_REG_MK_U8(0x0a22)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_31		SMIAPP_REG_MK_U8(0x0a23)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_32		SMIAPP_REG_MK_U8(0x0a24)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_33		SMIAPP_REG_MK_U8(0x0a25)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_34		SMIAPP_REG_MK_U8(0x0a26)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_35		SMIAPP_REG_MK_U8(0x0a27)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_36		SMIAPP_REG_MK_U8(0x0a28)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_37		SMIAPP_REG_MK_U8(0x0a29)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_38		SMIAPP_REG_MK_U8(0x0a2a)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_39		SMIAPP_REG_MK_U8(0x0a2b)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_40		SMIAPP_REG_MK_U8(0x0a2c)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_41		SMIAPP_REG_MK_U8(0x0a2d)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_42		SMIAPP_REG_MK_U8(0x0a2e)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_43		SMIAPP_REG_MK_U8(0x0a2f)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_44		SMIAPP_REG_MK_U8(0x0a30)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_45		SMIAPP_REG_MK_U8(0x0a31)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_46		SMIAPP_REG_MK_U8(0x0a32)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_47		SMIAPP_REG_MK_U8(0x0a33)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_48		SMIAPP_REG_MK_U8(0x0a34)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_49		SMIAPP_REG_MK_U8(0x0a35)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_50		SMIAPP_REG_MK_U8(0x0a36)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_51		SMIAPP_REG_MK_U8(0x0a37)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_52		SMIAPP_REG_MK_U8(0x0a38)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_53		SMIAPP_REG_MK_U8(0x0a39)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_54		SMIAPP_REG_MK_U8(0x0a3a)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_55		SMIAPP_REG_MK_U8(0x0a3b)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_56		SMIAPP_REG_MK_U8(0x0a3c)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_57		SMIAPP_REG_MK_U8(0x0a3d)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_58		SMIAPP_REG_MK_U8(0x0a3e)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_59		SMIAPP_REG_MK_U8(0x0a3f)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_60		SMIAPP_REG_MK_U8(0x0a40)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_61		SMIAPP_REG_MK_U8(0x0a41)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_62		SMIAPP_REG_MK_U8(0x0a42)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_1_DATA_63		SMIAPP_REG_MK_U8(0x0a43)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_CTRL			SMIAPP_REG_MK_U8(0x0a44)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_STATUS			SMIAPP_REG_MK_U8(0x0a45)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_PAGE_SELECT		SMIAPP_REG_MK_U8(0x0a46)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_0			SMIAPP_REG_MK_U8(0x0a48)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_1			SMIAPP_REG_MK_U8(0x0a49)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_2			SMIAPP_REG_MK_U8(0x0a4a)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_3			SMIAPP_REG_MK_U8(0x0a4b)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_4			SMIAPP_REG_MK_U8(0x0a4c)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_5			SMIAPP_REG_MK_U8(0x0a4d)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_6			SMIAPP_REG_MK_U8(0x0a4e)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_7			SMIAPP_REG_MK_U8(0x0a4f)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_8			SMIAPP_REG_MK_U8(0x0a50)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_9			SMIAPP_REG_MK_U8(0x0a51)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_10		SMIAPP_REG_MK_U8(0x0a52)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_11		SMIAPP_REG_MK_U8(0x0a53)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_12		SMIAPP_REG_MK_U8(0x0a54)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_13		SMIAPP_REG_MK_U8(0x0a55)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_14		SMIAPP_REG_MK_U8(0x0a56)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_15		SMIAPP_REG_MK_U8(0x0a57)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_16		SMIAPP_REG_MK_U8(0x0a58)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_17		SMIAPP_REG_MK_U8(0x0a59)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_18		SMIAPP_REG_MK_U8(0x0a5a)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_19		SMIAPP_REG_MK_U8(0x0a5b)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_20		SMIAPP_REG_MK_U8(0x0a5c)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_21		SMIAPP_REG_MK_U8(0x0a5d)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_22		SMIAPP_REG_MK_U8(0x0a5e)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_23		SMIAPP_REG_MK_U8(0x0a5f)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_24		SMIAPP_REG_MK_U8(0x0a60)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_25		SMIAPP_REG_MK_U8(0x0a61)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_26		SMIAPP_REG_MK_U8(0x0a62)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_27		SMIAPP_REG_MK_U8(0x0a63)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_28		SMIAPP_REG_MK_U8(0x0a64)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_29		SMIAPP_REG_MK_U8(0x0a65)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_30		SMIAPP_REG_MK_U8(0x0a66)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_31		SMIAPP_REG_MK_U8(0x0a67)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_32		SMIAPP_REG_MK_U8(0x0a68)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_33		SMIAPP_REG_MK_U8(0x0a69)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_34		SMIAPP_REG_MK_U8(0x0a6a)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_35		SMIAPP_REG_MK_U8(0x0a6b)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_36		SMIAPP_REG_MK_U8(0x0a6c)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_37		SMIAPP_REG_MK_U8(0x0a6d)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_38		SMIAPP_REG_MK_U8(0x0a6e)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_39		SMIAPP_REG_MK_U8(0x0a6f)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_40		SMIAPP_REG_MK_U8(0x0a70)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_41		SMIAPP_REG_MK_U8(0x0a71)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_42		SMIAPP_REG_MK_U8(0x0a72)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_43		SMIAPP_REG_MK_U8(0x0a73)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_44		SMIAPP_REG_MK_U8(0x0a74)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_45		SMIAPP_REG_MK_U8(0x0a75)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_46		SMIAPP_REG_MK_U8(0x0a76)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_47		SMIAPP_REG_MK_U8(0x0a77)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_48		SMIAPP_REG_MK_U8(0x0a78)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_49		SMIAPP_REG_MK_U8(0x0a79)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_50		SMIAPP_REG_MK_U8(0x0a7a)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_51		SMIAPP_REG_MK_U8(0x0a7b)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_52		SMIAPP_REG_MK_U8(0x0a7c)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_53		SMIAPP_REG_MK_U8(0x0a7d)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_54		SMIAPP_REG_MK_U8(0x0a7e)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_55		SMIAPP_REG_MK_U8(0x0a7f)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_56		SMIAPP_REG_MK_U8(0x0a80)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_57		SMIAPP_REG_MK_U8(0x0a81)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_58		SMIAPP_REG_MK_U8(0x0a82)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_59		SMIAPP_REG_MK_U8(0x0a83)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_60		SMIAPP_REG_MK_U8(0x0a84)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_61		SMIAPP_REG_MK_U8(0x0a85)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_62		SMIAPP_REG_MK_U8(0x0a86)
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_2_DATA_63		SMIAPP_REG_MK_U8(0x0a87)
-#define SMIAPP_REG_U8_SHADING_CORRECTION_ENABLE			SMIAPP_REG_MK_U8(0x0b00)
-#define SMIAPP_REG_U8_LUMINANCE_CORRECTION_LEVEL		SMIAPP_REG_MK_U8(0x0b01)
-#define SMIAPP_REG_U8_GREEN_IMBALANCE_FILTER_ENABLE		SMIAPP_REG_MK_U8(0x0b02)
-#define SMIAPP_REG_U8_GREEN_IMBALANCE_FILTER_WEIGHT		SMIAPP_REG_MK_U8(0x0b03)
-#define SMIAPP_REG_U8_BLACK_LEVEL_CORRECTION_ENABLE		SMIAPP_REG_MK_U8(0x0b04)
-#define SMIAPP_REG_U8_MAPPED_COUPLET_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b05)
-#define SMIAPP_REG_U8_SINGLE_DEFECT_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b06)
-#define SMIAPP_REG_U8_SINGLE_DEFECT_CORRECT_WEIGHT		SMIAPP_REG_MK_U8(0x0b07)
-#define SMIAPP_REG_U8_DYNAMIC_COUPLET_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b08)
-#define SMIAPP_REG_U8_DYNAMIC_COUPLET_CORRECT_WEIGHT		SMIAPP_REG_MK_U8(0x0b09)
-#define SMIAPP_REG_U8_COMBINED_DEFECT_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b0a)
-#define SMIAPP_REG_U8_COMBINED_DEFECT_CORRECT_WEIGHT		SMIAPP_REG_MK_U8(0x0b0b)
-#define SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_ENABLE		SMIAPP_REG_MK_U8(0x0b0c)
-#define SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_WEIGHT		SMIAPP_REG_MK_U8(0x0b0d)
-#define SMIAPP_REG_U8_MAPPED_LINE_DEFECT_CORRECT_ENABLE		SMIAPP_REG_MK_U8(0x0b0e)
-#define SMIAPP_REG_U8_MAPPED_LINE_DEFECT_CORRECT_ADJUST		SMIAPP_REG_MK_U8(0x0b0f)
-#define SMIAPP_REG_U8_MAPPED_COUPLET_CORRECT_ADJUST		SMIAPP_REG_MK_U8(0x0b10)
-#define SMIAPP_REG_U8_MAPPED_TRIPLET_DEFECT_CORRECT_ENABLE	SMIAPP_REG_MK_U8(0x0b11)
-#define SMIAPP_REG_U8_MAPPED_TRIPLET_DEFECT_CORRECT_ADJUST	SMIAPP_REG_MK_U8(0x0b12)
-#define SMIAPP_REG_U8_DYNAMIC_TRIPLET_DEFECT_CORRECT_ENABLE	SMIAPP_REG_MK_U8(0x0b13)
-#define SMIAPP_REG_U8_DYNAMIC_TRIPLET_DEFECT_CORRECT_ADJUST	SMIAPP_REG_MK_U8(0x0b14)
-#define SMIAPP_REG_U8_DYNAMIC_LINE_DEFECT_CORRECT_ENABLE	SMIAPP_REG_MK_U8(0x0b15)
-#define SMIAPP_REG_U8_DYNAMIC_LINE_DEFECT_CORRECT_ADJUST	SMIAPP_REG_MK_U8(0x0b16)
-#define SMIAPP_REG_U8_EDOF_MODE					SMIAPP_REG_MK_U8(0x0b80)
-#define SMIAPP_REG_U8_SHARPNESS					SMIAPP_REG_MK_U8(0x0b83)
-#define SMIAPP_REG_U8_DENOISING					SMIAPP_REG_MK_U8(0x0b84)
-#define SMIAPP_REG_U8_MODULE_SPECIFIC				SMIAPP_REG_MK_U8(0x0b85)
-#define SMIAPP_REG_U16_DEPTH_OF_FIELD				SMIAPP_REG_MK_U16(0x0b86)
-#define SMIAPP_REG_U16_FOCUS_DISTANCE				SMIAPP_REG_MK_U16(0x0b88)
-#define SMIAPP_REG_U8_ESTIMATION_MODE_CTRL			SMIAPP_REG_MK_U8(0x0b8a)
-#define SMIAPP_REG_U16_COLOUR_TEMPERATURE			SMIAPP_REG_MK_U16(0x0b8c)
-#define SMIAPP_REG_U16_ABSOLUTE_GAIN_GREENR			SMIAPP_REG_MK_U16(0x0b8e)
-#define SMIAPP_REG_U16_ABSOLUTE_GAIN_RED			SMIAPP_REG_MK_U16(0x0b90)
-#define SMIAPP_REG_U16_ABSOLUTE_GAIN_BLUE			SMIAPP_REG_MK_U16(0x0b92)
-#define SMIAPP_REG_U16_ABSOLUTE_GAIN_GREENB			SMIAPP_REG_MK_U16(0x0b94)
-#define SMIAPP_REG_U8_ESTIMATION_ZONE_MODE			SMIAPP_REG_MK_U8(0x0bc0)
-#define SMIAPP_REG_U16_FIXED_ZONE_WEIGHTING			SMIAPP_REG_MK_U16(0x0bc2)
-#define SMIAPP_REG_U16_CUSTOM_ZONE_X_START			SMIAPP_REG_MK_U16(0x0bc4)
-#define SMIAPP_REG_U16_CUSTOM_ZONE_Y_START			SMIAPP_REG_MK_U16(0x0bc6)
-#define SMIAPP_REG_U16_CUSTOM_ZONE_WIDTH			SMIAPP_REG_MK_U16(0x0bc8)
-#define SMIAPP_REG_U16_CUSTOM_ZONE_HEIGHT			SMIAPP_REG_MK_U16(0x0bca)
-#define SMIAPP_REG_U8_GLOBAL_RESET_CTRL1			SMIAPP_REG_MK_U8(0x0c00)
-#define SMIAPP_REG_U8_GLOBAL_RESET_CTRL2			SMIAPP_REG_MK_U8(0x0c01)
-#define SMIAPP_REG_U8_GLOBAL_RESET_MODE_CONFIG_1		SMIAPP_REG_MK_U8(0x0c02)
-#define SMIAPP_REG_U8_GLOBAL_RESET_MODE_CONFIG_2		SMIAPP_REG_MK_U8(0x0c03)
-#define SMIAPP_REG_U16_TRDY_CTRL				SMIAPP_REG_MK_U16(0x0c04)
-#define SMIAPP_REG_U16_TRDOUT_CTRL				SMIAPP_REG_MK_U16(0x0c06)
-#define SMIAPP_REG_U16_TSHUTTER_STROBE_DELAY_CTRL		SMIAPP_REG_MK_U16(0x0c08)
-#define SMIAPP_REG_U16_TSHUTTER_STROBE_WIDTH_CTRL		SMIAPP_REG_MK_U16(0x0c0a)
-#define SMIAPP_REG_U16_TFLASH_STROBE_DELAY_CTRL			SMIAPP_REG_MK_U16(0x0c0c)
-#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_CTRL		SMIAPP_REG_MK_U16(0x0c0e)
-#define SMIAPP_REG_U16_TGRST_INTERVAL_CTRL			SMIAPP_REG_MK_U16(0x0c10)
-#define SMIAPP_REG_U8_FLASH_STROBE_ADJUSTMENT			SMIAPP_REG_MK_U8(0x0c12)
-#define SMIAPP_REG_U16_FLASH_STROBE_START_POINT			SMIAPP_REG_MK_U16(0x0c14)
-#define SMIAPP_REG_U16_TFLASH_STROBE_DELAY_RS_CTRL		SMIAPP_REG_MK_U16(0x0c16)
-#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_HIGH_RS_CTRL		SMIAPP_REG_MK_U16(0x0c18)
-#define SMIAPP_REG_U8_FLASH_MODE_RS				SMIAPP_REG_MK_U8(0x0c1a)
-#define SMIAPP_REG_U8_FLASH_TRIGGER_RS				SMIAPP_REG_MK_U8(0x0c1b)
-#define SMIAPP_REG_U8_FLASH_STATUS				SMIAPP_REG_MK_U8(0x0c1c)
-#define SMIAPP_REG_U8_SA_STROBE_MODE				SMIAPP_REG_MK_U8(0x0c1d)
-#define SMIAPP_REG_U16_SA_STROBE_START_POINT			SMIAPP_REG_MK_U16(0x0c1e)
-#define SMIAPP_REG_U16_TSA_STROBE_DELAY_CTRL			SMIAPP_REG_MK_U16(0x0c20)
-#define SMIAPP_REG_U16_TSA_STROBE_WIDTH_CTRL			SMIAPP_REG_MK_U16(0x0c22)
-#define SMIAPP_REG_U8_SA_STROBE_TRIGGER				SMIAPP_REG_MK_U8(0x0c24)
-#define SMIAPP_REG_U8_SPECIAL_ACTUATOR_STATUS			SMIAPP_REG_MK_U8(0x0c25)
-#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH2_HIGH_RS_CTRL	SMIAPP_REG_MK_U16(0x0c26)
-#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_LOW_RS_CTRL		SMIAPP_REG_MK_U16(0x0c28)
-#define SMIAPP_REG_U8_TFLASH_STROBE_COUNT_RS_CTRL		SMIAPP_REG_MK_U8(0x0c2a)
-#define SMIAPP_REG_U8_TFLASH_STROBE_COUNT_CTRL			SMIAPP_REG_MK_U8(0x0c2b)
-#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH2_HIGH_CTRL		SMIAPP_REG_MK_U16(0x0c2c)
-#define SMIAPP_REG_U16_TFLASH_STROBE_WIDTH_LOW_CTRL		SMIAPP_REG_MK_U16(0x0c2e)
-#define SMIAPP_REG_U8_LOW_LEVEL_CTRL				SMIAPP_REG_MK_U8(0x0c80)
-#define SMIAPP_REG_U16_MAIN_TRIGGER_REF_POINT			SMIAPP_REG_MK_U16(0x0c82)
-#define SMIAPP_REG_U16_MAIN_TRIGGER_T3				SMIAPP_REG_MK_U16(0x0c84)
-#define SMIAPP_REG_U8_MAIN_TRIGGER_COUNT			SMIAPP_REG_MK_U8(0x0c86)
-#define SMIAPP_REG_U16_PHASE1_TRIGGER_T3			SMIAPP_REG_MK_U16(0x0c88)
-#define SMIAPP_REG_U8_PHASE1_TRIGGER_COUNT			SMIAPP_REG_MK_U8(0x0c8a)
-#define SMIAPP_REG_U16_PHASE2_TRIGGER_T3			SMIAPP_REG_MK_U16(0x0c8c)
-#define SMIAPP_REG_U8_PHASE2_TRIGGER_COUNT			SMIAPP_REG_MK_U8(0x0c8e)
-#define SMIAPP_REG_U8_MECH_SHUTTER_CTRL				SMIAPP_REG_MK_U8(0x0d00)
-#define SMIAPP_REG_U8_OPERATION_MODE				SMIAPP_REG_MK_U8(0x0d01)
-#define SMIAPP_REG_U8_ACT_STATE1				SMIAPP_REG_MK_U8(0x0d02)
-#define SMIAPP_REG_U8_ACT_STATE2				SMIAPP_REG_MK_U8(0x0d03)
-#define SMIAPP_REG_U16_FOCUS_CHANGE				SMIAPP_REG_MK_U16(0x0d80)
-#define SMIAPP_REG_U16_FOCUS_CHANGE_CONTROL			SMIAPP_REG_MK_U16(0x0d82)
-#define SMIAPP_REG_U16_FOCUS_CHANGE_NUMBER_PHASE1		SMIAPP_REG_MK_U16(0x0d84)
-#define SMIAPP_REG_U16_FOCUS_CHANGE_NUMBER_PHASE2		SMIAPP_REG_MK_U16(0x0d86)
-#define SMIAPP_REG_U8_STROBE_COUNT_PHASE1			SMIAPP_REG_MK_U8(0x0d88)
-#define SMIAPP_REG_U8_STROBE_COUNT_PHASE2			SMIAPP_REG_MK_U8(0x0d89)
-#define SMIAPP_REG_U8_POSITION					SMIAPP_REG_MK_U8(0x0d8a)
-#define SMIAPP_REG_U8_BRACKETING_LUT_CONTROL			SMIAPP_REG_MK_U8(0x0e00)
-#define SMIAPP_REG_U8_BRACKETING_LUT_MODE			SMIAPP_REG_MK_U8(0x0e01)
-#define SMIAPP_REG_U8_BRACKETING_LUT_ENTRY_CONTROL		SMIAPP_REG_MK_U8(0x0e02)
-#define SMIAPP_REG_U8_LUT_PARAMETERS_START			SMIAPP_REG_MK_U8(0x0e10)
-#define SMIAPP_REG_U8_LUT_PARAMETERS_END			SMIAPP_REG_MK_U8(0x0eff)
-#define SMIAPP_REG_U16_INTEGRATION_TIME_CAPABILITY		SMIAPP_REG_MK_U16(0x1000)
-#define SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MIN		SMIAPP_REG_MK_U16(0x1004)
-#define SMIAPP_REG_U16_COARSE_INTEGRATION_TIME_MAX_MARGIN	SMIAPP_REG_MK_U16(0x1006)
-#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN		SMIAPP_REG_MK_U16(0x1008)
-#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN		SMIAPP_REG_MK_U16(0x100a)
-#define SMIAPP_REG_U16_DIGITAL_GAIN_CAPABILITY			SMIAPP_REG_MK_U16(0x1080)
-#define SMIAPP_REG_U16_DIGITAL_GAIN_MIN				SMIAPP_REG_MK_U16(0x1084)
-#define SMIAPP_REG_U16_DIGITAL_GAIN_MAX				SMIAPP_REG_MK_U16(0x1086)
-#define SMIAPP_REG_U16_DIGITAL_GAIN_STEP_SIZE			SMIAPP_REG_MK_U16(0x1088)
-#define SMIAPP_REG_F32_MIN_EXT_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1100)
-#define SMIAPP_REG_F32_MAX_EXT_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1104)
-#define SMIAPP_REG_U16_MIN_PRE_PLL_CLK_DIV			SMIAPP_REG_MK_U16(0x1108)
-#define SMIAPP_REG_U16_MAX_PRE_PLL_CLK_DIV			SMIAPP_REG_MK_U16(0x110a)
-#define SMIAPP_REG_F32_MIN_PLL_IP_FREQ_HZ			SMIAPP_REG_MK_F32(0x110c)
-#define SMIAPP_REG_F32_MAX_PLL_IP_FREQ_HZ			SMIAPP_REG_MK_F32(0x1110)
-#define SMIAPP_REG_U16_MIN_PLL_MULTIPLIER			SMIAPP_REG_MK_U16(0x1114)
-#define SMIAPP_REG_U16_MAX_PLL_MULTIPLIER			SMIAPP_REG_MK_U16(0x1116)
-#define SMIAPP_REG_F32_MIN_PLL_OP_FREQ_HZ			SMIAPP_REG_MK_F32(0x1118)
-#define SMIAPP_REG_F32_MAX_PLL_OP_FREQ_HZ			SMIAPP_REG_MK_F32(0x111c)
-#define SMIAPP_REG_U16_MIN_VT_SYS_CLK_DIV			SMIAPP_REG_MK_U16(0x1120)
-#define SMIAPP_REG_U16_MAX_VT_SYS_CLK_DIV			SMIAPP_REG_MK_U16(0x1122)
-#define SMIAPP_REG_F32_MIN_VT_SYS_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1124)
-#define SMIAPP_REG_F32_MAX_VT_SYS_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1128)
-#define SMIAPP_REG_F32_MIN_VT_PIX_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x112c)
-#define SMIAPP_REG_F32_MAX_VT_PIX_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1130)
-#define SMIAPP_REG_U16_MIN_VT_PIX_CLK_DIV			SMIAPP_REG_MK_U16(0x1134)
-#define SMIAPP_REG_U16_MAX_VT_PIX_CLK_DIV			SMIAPP_REG_MK_U16(0x1136)
-#define SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES			SMIAPP_REG_MK_U16(0x1140)
-#define SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES			SMIAPP_REG_MK_U16(0x1142)
-#define SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK			SMIAPP_REG_MK_U16(0x1144)
-#define SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK			SMIAPP_REG_MK_U16(0x1146)
-#define SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK			SMIAPP_REG_MK_U16(0x1148)
-#define SMIAPP_REG_U16_MIN_FRAME_BLANKING_LINES			SMIAPP_REG_MK_U16(0x114a)
-#define SMIAPP_REG_U8_MIN_LINE_LENGTH_PCK_STEP_SIZE		SMIAPP_REG_MK_U8(0x114c)
-#define SMIAPP_REG_U16_MIN_OP_SYS_CLK_DIV			SMIAPP_REG_MK_U16(0x1160)
-#define SMIAPP_REG_U16_MAX_OP_SYS_CLK_DIV			SMIAPP_REG_MK_U16(0x1162)
-#define SMIAPP_REG_F32_MIN_OP_SYS_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1164)
-#define SMIAPP_REG_F32_MAX_OP_SYS_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1168)
-#define SMIAPP_REG_U16_MIN_OP_PIX_CLK_DIV			SMIAPP_REG_MK_U16(0x116c)
-#define SMIAPP_REG_U16_MAX_OP_PIX_CLK_DIV			SMIAPP_REG_MK_U16(0x116e)
-#define SMIAPP_REG_F32_MIN_OP_PIX_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1170)
-#define SMIAPP_REG_F32_MAX_OP_PIX_CLK_FREQ_HZ			SMIAPP_REG_MK_F32(0x1174)
-#define SMIAPP_REG_U16_X_ADDR_MIN				SMIAPP_REG_MK_U16(0x1180)
-#define SMIAPP_REG_U16_Y_ADDR_MIN				SMIAPP_REG_MK_U16(0x1182)
-#define SMIAPP_REG_U16_X_ADDR_MAX				SMIAPP_REG_MK_U16(0x1184)
-#define SMIAPP_REG_U16_Y_ADDR_MAX				SMIAPP_REG_MK_U16(0x1186)
-#define SMIAPP_REG_U16_MIN_X_OUTPUT_SIZE			SMIAPP_REG_MK_U16(0x1188)
-#define SMIAPP_REG_U16_MIN_Y_OUTPUT_SIZE			SMIAPP_REG_MK_U16(0x118a)
-#define SMIAPP_REG_U16_MAX_X_OUTPUT_SIZE			SMIAPP_REG_MK_U16(0x118c)
-#define SMIAPP_REG_U16_MAX_Y_OUTPUT_SIZE			SMIAPP_REG_MK_U16(0x118e)
-#define SMIAPP_REG_U16_MIN_EVEN_INC				SMIAPP_REG_MK_U16(0x11c0)
-#define SMIAPP_REG_U16_MAX_EVEN_INC				SMIAPP_REG_MK_U16(0x11c2)
-#define SMIAPP_REG_U16_MIN_ODD_INC				SMIAPP_REG_MK_U16(0x11c4)
-#define SMIAPP_REG_U16_MAX_ODD_INC				SMIAPP_REG_MK_U16(0x11c6)
-#define SMIAPP_REG_U16_SCALING_CAPABILITY			SMIAPP_REG_MK_U16(0x1200)
-#define SMIAPP_REG_U16_SCALER_M_MIN				SMIAPP_REG_MK_U16(0x1204)
-#define SMIAPP_REG_U16_SCALER_M_MAX				SMIAPP_REG_MK_U16(0x1206)
-#define SMIAPP_REG_U16_SCALER_N_MIN				SMIAPP_REG_MK_U16(0x1208)
-#define SMIAPP_REG_U16_SCALER_N_MAX				SMIAPP_REG_MK_U16(0x120a)
-#define SMIAPP_REG_U16_SPATIAL_SAMPLING_CAPABILITY		SMIAPP_REG_MK_U16(0x120c)
-#define SMIAPP_REG_U8_DIGITAL_CROP_CAPABILITY			SMIAPP_REG_MK_U8(0x120e)
-#define SMIAPP_REG_U16_COMPRESSION_CAPABILITY			SMIAPP_REG_MK_U16(0x1300)
-#define SMIAPP_REG_U16_MATRIX_ELEMENT_REDINRED			SMIAPP_REG_MK_U16(0x1400)
-#define SMIAPP_REG_U16_MATRIX_ELEMENT_GREENINRED		SMIAPP_REG_MK_U16(0x1402)
-#define SMIAPP_REG_U16_MATRIX_ELEMENT_BLUEINRED			SMIAPP_REG_MK_U16(0x1404)
-#define SMIAPP_REG_U16_MATRIX_ELEMENT_REDINGREEN		SMIAPP_REG_MK_U16(0x1406)
-#define SMIAPP_REG_U16_MATRIX_ELEMENT_GREENINGREEN		SMIAPP_REG_MK_U16(0x1408)
-#define SMIAPP_REG_U16_MATRIX_ELEMENT_BLUEINGREEN		SMIAPP_REG_MK_U16(0x140a)
-#define SMIAPP_REG_U16_MATRIX_ELEMENT_REDINBLUE			SMIAPP_REG_MK_U16(0x140c)
-#define SMIAPP_REG_U16_MATRIX_ELEMENT_GREENINBLUE		SMIAPP_REG_MK_U16(0x140e)
-#define SMIAPP_REG_U16_MATRIX_ELEMENT_BLUEINBLUE		SMIAPP_REG_MK_U16(0x1410)
-#define SMIAPP_REG_U16_FIFO_SIZE_PIXELS				SMIAPP_REG_MK_U16(0x1500)
-#define SMIAPP_REG_U8_FIFO_SUPPORT_CAPABILITY			SMIAPP_REG_MK_U8(0x1502)
-#define SMIAPP_REG_U8_DPHY_CTRL_CAPABILITY			SMIAPP_REG_MK_U8(0x1600)
-#define SMIAPP_REG_U8_CSI_LANE_MODE_CAPABILITY			SMIAPP_REG_MK_U8(0x1601)
-#define SMIAPP_REG_U8_CSI_SIGNALLING_MODE_CAPABILITY		SMIAPP_REG_MK_U8(0x1602)
-#define SMIAPP_REG_U8_FAST_STANDBY_CAPABILITY			SMIAPP_REG_MK_U8(0x1603)
-#define SMIAPP_REG_U8_CCI_ADDRESS_CONTROL_CAPABILITY		SMIAPP_REG_MK_U8(0x1604)
-#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_1_LANE_MODE_MBPS	SMIAPP_REG_MK_U32(0x1608)
-#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_2_LANE_MODE_MBPS	SMIAPP_REG_MK_U32(0x160c)
-#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_3_LANE_MODE_MBPS	SMIAPP_REG_MK_U32(0x1610)
-#define SMIAPP_REG_U32_MAX_PER_LANE_BITRATE_4_LANE_MODE_MBPS	SMIAPP_REG_MK_U32(0x1614)
-#define SMIAPP_REG_U8_TEMP_SENSOR_CAPABILITY			SMIAPP_REG_MK_U8(0x1618)
-#define SMIAPP_REG_U16_MIN_FRAME_LENGTH_LINES_BIN		SMIAPP_REG_MK_U16(0x1700)
-#define SMIAPP_REG_U16_MAX_FRAME_LENGTH_LINES_BIN		SMIAPP_REG_MK_U16(0x1702)
-#define SMIAPP_REG_U16_MIN_LINE_LENGTH_PCK_BIN			SMIAPP_REG_MK_U16(0x1704)
-#define SMIAPP_REG_U16_MAX_LINE_LENGTH_PCK_BIN			SMIAPP_REG_MK_U16(0x1706)
-#define SMIAPP_REG_U16_MIN_LINE_BLANKING_PCK_BIN		SMIAPP_REG_MK_U16(0x1708)
-#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MIN_BIN		SMIAPP_REG_MK_U16(0x170a)
-#define SMIAPP_REG_U16_FINE_INTEGRATION_TIME_MAX_MARGIN_BIN	SMIAPP_REG_MK_U16(0x170c)
-#define SMIAPP_REG_U8_BINNING_CAPABILITY			SMIAPP_REG_MK_U8(0x1710)
-#define SMIAPP_REG_U8_BINNING_WEIGHTING_CAPABILITY		SMIAPP_REG_MK_U8(0x1711)
-#define SMIAPP_REG_U8_BINNING_SUBTYPES				SMIAPP_REG_MK_U8(0x1712)
-#define SMIAPP_REG_U8_BINNING_TYPE_n(n)				SMIAPP_REG_MK_U8(0x1713 + (n)) /* 1 <= n <= 237 */
-#define SMIAPP_REG_U8_DATA_TRANSFER_IF_CAPABILITY		SMIAPP_REG_MK_U8(0x1800)
-#define SMIAPP_REG_U8_SHADING_CORRECTION_CAPABILITY		SMIAPP_REG_MK_U8(0x1900)
-#define SMIAPP_REG_U8_GREEN_IMBALANCE_CAPABILITY		SMIAPP_REG_MK_U8(0x1901)
-#define SMIAPP_REG_U8_BLACK_LEVEL_CAPABILITY			SMIAPP_REG_MK_U8(0x1902)
-#define SMIAPP_REG_U8_MODULE_SPECIFIC_CORRECTION_CAPABILITY	SMIAPP_REG_MK_U8(0x1903)
-#define SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY		SMIAPP_REG_MK_U16(0x1904)
-#define SMIAPP_REG_U16_DEFECT_CORRECTION_CAPABILITY_2		SMIAPP_REG_MK_U16(0x1906)
-#define SMIAPP_REG_U8_EDOF_CAPABILITY				SMIAPP_REG_MK_U8(0x1980)
-#define SMIAPP_REG_U8_ESTIMATION_FRAMES				SMIAPP_REG_MK_U8(0x1981)
-#define SMIAPP_REG_U8_SUPPORTS_SHARPNESS_ADJ			SMIAPP_REG_MK_U8(0x1982)
-#define SMIAPP_REG_U8_SUPPORTS_DENOISING_ADJ			SMIAPP_REG_MK_U8(0x1983)
-#define SMIAPP_REG_U8_SUPPORTS_MODULE_SPECIFIC_ADJ		SMIAPP_REG_MK_U8(0x1984)
-#define SMIAPP_REG_U8_SUPPORTS_DEPTH_OF_FIELD_ADJ		SMIAPP_REG_MK_U8(0x1985)
-#define SMIAPP_REG_U8_SUPPORTS_FOCUS_DISTANCE_ADJ		SMIAPP_REG_MK_U8(0x1986)
-#define SMIAPP_REG_U8_COLOUR_FEEDBACK_CAPABILITY		SMIAPP_REG_MK_U8(0x1987)
-#define SMIAPP_REG_U8_EDOF_SUPPORT_AB_NXM			SMIAPP_REG_MK_U8(0x1988)
-#define SMIAPP_REG_U8_ESTIMATION_MODE_CAPABILITY		SMIAPP_REG_MK_U8(0x19c0)
-#define SMIAPP_REG_U8_ESTIMATION_ZONE_CAPABILITY		SMIAPP_REG_MK_U8(0x19c1)
-#define SMIAPP_REG_U16_EST_DEPTH_OF_FIELD			SMIAPP_REG_MK_U16(0x19c2)
-#define SMIAPP_REG_U16_EST_FOCUS_DISTANCE			SMIAPP_REG_MK_U16(0x19c4)
-#define SMIAPP_REG_U16_CAPABILITY_TRDY_MIN			SMIAPP_REG_MK_U16(0x1a00)
-#define SMIAPP_REG_U8_FLASH_MODE_CAPABILITY			SMIAPP_REG_MK_U8(0x1a02)
-#define SMIAPP_REG_U16_MECH_SHUT_AND_ACT_START_ADDR		SMIAPP_REG_MK_U16(0x1b02)
-#define SMIAPP_REG_U8_ACTUATOR_CAPABILITY			SMIAPP_REG_MK_U8(0x1b04)
-#define SMIAPP_REG_U16_ACTUATOR_TYPE				SMIAPP_REG_MK_U16(0x1b40)
-#define SMIAPP_REG_U8_AF_DEVICE_ADDRESS				SMIAPP_REG_MK_U8(0x1b42)
-#define SMIAPP_REG_U16_FOCUS_CHANGE_ADDRESS			SMIAPP_REG_MK_U16(0x1b44)
-#define SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_1		SMIAPP_REG_MK_U8(0x1c00)
-#define SMIAPP_REG_U8_BRACKETING_LUT_CAPABILITY_2		SMIAPP_REG_MK_U8(0x1c01)
-#define SMIAPP_REG_U8_BRACKETING_LUT_SIZE			SMIAPP_REG_MK_U8(0x1c02)
diff --git a/drivers/media/video/smiapp/smiapp-reg.h b/drivers/media/video/smiapp/smiapp-reg.h
deleted file mode 100644
index d0167aa..0000000
--- a/drivers/media/video/smiapp/smiapp-reg.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * drivers/media/video/smiapp/smiapp-reg.h
- *
- * Generic driver for SMIA/SMIA++ compliant camera modules
- *
- * Copyright (C) 2011--2012 Nokia Corporation
- * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __SMIAPP_REG_H_
-#define __SMIAPP_REG_H_
-
-#include "smiapp-reg-defs.h"
-
-/* Bits for above register */
-#define SMIAPP_IMAGE_ORIENTATION_HFLIP		(1 << 0)
-#define SMIAPP_IMAGE_ORIENTATION_VFLIP		(1 << 1)
-
-#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_EN		(1 << 0)
-#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_RD_EN		(0 << 1)
-#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_WR_EN		(1 << 1)
-#define SMIAPP_DATA_TRANSFER_IF_1_CTRL_ERR_CLEAR	(1 << 2)
-#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_RD_READY	(1 << 0)
-#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_WR_READY	(1 << 1)
-#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_EDATA		(1 << 2)
-#define SMIAPP_DATA_TRANSFER_IF_1_STATUS_EUSAGE		(1 << 3)
-
-#define SMIAPP_SOFTWARE_RESET				(1 << 0)
-
-#define SMIAPP_FLASH_MODE_CAPABILITY_SINGLE_STROBE	(1 << 0)
-#define SMIAPP_FLASH_MODE_CAPABILITY_MULTIPLE_STROBE	(1 << 1)
-
-#define SMIAPP_DPHY_CTRL_AUTOMATIC			0
-/* DPHY control based on REQUESTED_LINK_BIT_RATE_MBPS */
-#define SMIAPP_DPHY_CTRL_UI				1
-#define SMIAPP_DPHY_CTRL_REGISTER			2
-
-#define SMIAPP_COMPRESSION_MODE_SIMPLE_PREDICTOR	1
-#define SMIAPP_COMPRESSION_MODE_ADVANCED_PREDICTOR	2
-
-#define SMIAPP_MODE_SELECT_SOFTWARE_STANDBY		0
-#define SMIAPP_MODE_SELECT_STREAMING			1
-
-#define SMIAPP_SCALING_MODE_NONE			0
-#define SMIAPP_SCALING_MODE_HORIZONTAL			1
-#define SMIAPP_SCALING_MODE_BOTH			2
-
-#define SMIAPP_SCALING_CAPABILITY_NONE			0
-#define SMIAPP_SCALING_CAPABILITY_HORIZONTAL		1
-#define SMIAPP_SCALING_CAPABILITY_BOTH			2 /* horizontal/both */
-
-/* digital crop right before scaler */
-#define SMIAPP_DIGITAL_CROP_CAPABILITY_NONE		0
-#define SMIAPP_DIGITAL_CROP_CAPABILITY_INPUT_CROP	1
-
-#define SMIAPP_BINNING_CAPABILITY_NO			0
-#define SMIAPP_BINNING_CAPABILITY_YES			1
-
-/* Maximum number of binning subtypes */
-#define SMIAPP_BINNING_SUBTYPES				253
-
-#define SMIAPP_PIXEL_ORDER_GRBG				0
-#define SMIAPP_PIXEL_ORDER_RGGB				1
-#define SMIAPP_PIXEL_ORDER_BGGR				2
-#define SMIAPP_PIXEL_ORDER_GBRG				3
-
-#define SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL		1
-#define SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED		2
-#define SMIAPP_DATA_FORMAT_MODEL_TYPE_NORMAL_N		8
-#define SMIAPP_DATA_FORMAT_MODEL_TYPE_EXTENDED_N	16
-
-#define SMIAPP_FRAME_FORMAT_MODEL_TYPE_2BYTE		0x01
-#define SMIAPP_FRAME_FORMAT_MODEL_TYPE_4BYTE		0x02
-#define SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NROWS_MASK	0x0f
-#define SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_MASK	0xf0
-#define SMIAPP_FRAME_FORMAT_MODEL_SUBTYPE_NCOLS_SHIFT	4
-
-#define SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_MASK	0xf000
-#define SMIAPP_FRAME_FORMAT_DESC_2_PIXELCODE_SHIFT	12
-#define SMIAPP_FRAME_FORMAT_DESC_2_PIXELS_MASK		0x0fff
-
-#define SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_MASK	0xf0000000
-#define SMIAPP_FRAME_FORMAT_DESC_4_PIXELCODE_SHIFT	28
-#define SMIAPP_FRAME_FORMAT_DESC_4_PIXELS_MASK		0x0000ffff
-
-#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_EMBEDDED	1
-#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DUMMY	2
-#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_BLACK	3
-#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_DARK		4
-#define SMIAPP_FRAME_FORMAT_DESC_PIXELCODE_VISIBLE	5
-
-#define SMIAPP_FAST_STANDBY_CTRL_COMPLETE_FRAMES	0
-#define SMIAPP_FAST_STANDBY_CTRL_IMMEDIATE		1
-
-/* Scaling N factor */
-#define SMIAPP_SCALE_N					16
-
-/* Image statistics registers */
-/* Registers 0x2000 to 0x2fff are reserved for future
- * use for statistics features.
- */
-
-/* Manufacturer Specific Registers: 0x3000 to 0x3fff
- * The manufacturer specifies these as a black box.
- */
-
-#endif /* __SMIAPP_REG_H_ */
diff --git a/drivers/media/video/smiapp/smiapp-regs.c b/drivers/media/video/smiapp/smiapp-regs.c
deleted file mode 100644
index b1812b1..0000000
--- a/drivers/media/video/smiapp/smiapp-regs.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * drivers/media/video/smiapp/smiapp-regs.c
- *
- * Generic driver for SMIA/SMIA++ compliant camera modules
- *
- * Copyright (C) 2011--2012 Nokia Corporation
- * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/delay.h>
-#include <linux/i2c.h>
-
-#include "smiapp.h"
-#include "smiapp-regs.h"
-
-static uint32_t float_to_u32_mul_1000000(struct i2c_client *client,
-					 uint32_t phloat)
-{
-	int32_t exp;
-	uint64_t man;
-
-	if (phloat >= 0x80000000) {
-		dev_err(&client->dev, "this is a negative number\n");
-		return 0;
-	}
-
-	if (phloat == 0x7f800000)
-		return ~0; /* Inf. */
-
-	if ((phloat & 0x7f800000) == 0x7f800000) {
-		dev_err(&client->dev, "NaN or other special number\n");
-		return 0;
-	}
-
-	/* Valid cases begin here */
-	if (phloat == 0)
-		return 0; /* Valid zero */
-
-	if (phloat > 0x4f800000)
-		return ~0; /* larger than 4294967295 */
-
-	/*
-	 * Unbias exponent (note how phloat is now guaranteed to
-	 * have 0 in the high bit)
-	 */
-	exp = ((int32_t)phloat >> 23) - 127;
-
-	/* Extract mantissa, add missing '1' bit and it's in MHz */
-	man = ((phloat & 0x7fffff) | 0x800000) * 1000000ULL;
-
-	if (exp < 0)
-		man >>= -exp;
-	else
-		man <<= exp;
-
-	man >>= 23; /* Remove mantissa bias */
-
-	return man & 0xffffffff;
-}
-
-
-/*
- * Read a 8/16/32-bit i2c register.  The value is returned in 'val'.
- * Returns zero if successful, or non-zero otherwise.
- */
-static int ____smiapp_read(struct smiapp_sensor *sensor, u16 reg,
-			   u16 len, u32 *val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
-	struct i2c_msg msg;
-	unsigned char data[4];
-	u16 offset = reg;
-	int r;
-
-	msg.addr = client->addr;
-	msg.flags = 0;
-	msg.len = 2;
-	msg.buf = data;
-
-	/* high byte goes out first */
-	data[0] = (u8) (offset >> 8);
-	data[1] = (u8) offset;
-	r = i2c_transfer(client->adapter, &msg, 1);
-	if (r != 1) {
-		if (r >= 0)
-			r = -EBUSY;
-		goto err;
-	}
-
-	msg.len = len;
-	msg.flags = I2C_M_RD;
-	r = i2c_transfer(client->adapter, &msg, 1);
-	if (r != 1) {
-		if (r >= 0)
-			r = -EBUSY;
-		goto err;
-	}
-
-	*val = 0;
-	/* high byte comes first */
-	switch (len) {
-	case SMIA_REG_32BIT:
-		*val = (data[0] << 24) + (data[1] << 16) + (data[2] << 8) +
-			data[3];
-		break;
-	case SMIA_REG_16BIT:
-		*val = (data[0] << 8) + data[1];
-		break;
-	case SMIA_REG_8BIT:
-		*val = data[0];
-		break;
-	default:
-		BUG();
-	}
-
-	return 0;
-
-err:
-	dev_err(&client->dev, "read from offset 0x%x error %d\n", offset, r);
-
-	return r;
-}
-
-/* Read a register using 8-bit access only. */
-static int ____smiapp_read_8only(struct smiapp_sensor *sensor, u16 reg,
-				 u16 len, u32 *val)
-{
-	unsigned int i;
-	int rval;
-
-	*val = 0;
-
-	for (i = 0; i < len; i++) {
-		u32 val8;
-
-		rval = ____smiapp_read(sensor, reg + i, 1, &val8);
-		if (rval < 0)
-			return rval;
-		*val |= val8 << ((len - i - 1) << 3);
-	}
-
-	return 0;
-}
-
-/*
- * Read a 8/16/32-bit i2c register.  The value is returned in 'val'.
- * Returns zero if successful, or non-zero otherwise.
- */
-static int __smiapp_read(struct smiapp_sensor *sensor, u32 reg, u32 *val,
-			 bool only8)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
-	unsigned int len = (u8)(reg >> 16);
-	int rval;
-
-	if (len != SMIA_REG_8BIT && len != SMIA_REG_16BIT
-	    && len != SMIA_REG_32BIT)
-		return -EINVAL;
-
-	if (smiapp_quirk_reg(sensor, reg, val))
-		goto found_quirk;
-
-	if (len == SMIA_REG_8BIT && !only8)
-		rval = ____smiapp_read(sensor, (u16)reg, len, val);
-	else
-		rval = ____smiapp_read_8only(sensor, (u16)reg, len, val);
-	if (rval < 0)
-		return rval;
-
-found_quirk:
-	if (reg & SMIA_REG_FLAG_FLOAT)
-		*val = float_to_u32_mul_1000000(client, *val);
-
-	return 0;
-}
-
-int smiapp_read(struct smiapp_sensor *sensor, u32 reg, u32 *val)
-{
-	return __smiapp_read(
-		sensor, reg, val,
-		smiapp_needs_quirk(sensor,
-				   SMIAPP_QUIRK_FLAG_8BIT_READ_ONLY));
-}
-
-int smiapp_read_8only(struct smiapp_sensor *sensor, u32 reg, u32 *val)
-{
-	return __smiapp_read(sensor, reg, val, true);
-}
-
-/*
- * Write to a 8/16-bit register.
- * Returns zero if successful, or non-zero otherwise.
- */
-int smiapp_write(struct smiapp_sensor *sensor, u32 reg, u32 val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
-	struct i2c_msg msg;
-	unsigned char data[6];
-	unsigned int retries;
-	unsigned int flags = reg >> 24;
-	unsigned int len = (u8)(reg >> 16);
-	u16 offset = reg;
-	int r;
-
-	if ((len != SMIA_REG_8BIT && len != SMIA_REG_16BIT &&
-	     len != SMIA_REG_32BIT) || flags)
-		return -EINVAL;
-
-	msg.addr = client->addr;
-	msg.flags = 0; /* Write */
-	msg.len = 2 + len;
-	msg.buf = data;
-
-	/* high byte goes out first */
-	data[0] = (u8) (reg >> 8);
-	data[1] = (u8) (reg & 0xff);
-
-	switch (len) {
-	case SMIA_REG_8BIT:
-		data[2] = val;
-		break;
-	case SMIA_REG_16BIT:
-		data[2] = val >> 8;
-		data[3] = val;
-		break;
-	case SMIA_REG_32BIT:
-		data[2] = val >> 24;
-		data[3] = val >> 16;
-		data[4] = val >> 8;
-		data[5] = val;
-		break;
-	default:
-		BUG();
-	}
-
-	for (retries = 0; retries < 5; retries++) {
-		/*
-		 * Due to unknown reason sensor stops responding. This
-		 * loop is a temporaty solution until the root cause
-		 * is found.
-		 */
-		r = i2c_transfer(client->adapter, &msg, 1);
-		if (r == 1) {
-			if (retries)
-				dev_err(&client->dev,
-					"sensor i2c stall encountered. "
-					"retries: %d\n", retries);
-			return 0;
-		}
-
-		usleep_range(2000, 2000);
-	}
-
-	dev_err(&client->dev,
-		"wrote 0x%x to offset 0x%x error %d\n", val, offset, r);
-
-	return r;
-}
diff --git a/drivers/media/video/smiapp/smiapp-regs.h b/drivers/media/video/smiapp/smiapp-regs.h
deleted file mode 100644
index 7f9013b..0000000
--- a/drivers/media/video/smiapp/smiapp-regs.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/media/smiapp/smiapp-regs.h
- *
- * Generic driver for SMIA/SMIA++ compliant camera modules
- *
- * Copyright (C) 2011--2012 Nokia Corporation
- * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef SMIAPP_REGS_H
-#define SMIAPP_REGS_H
-
-#include <linux/i2c.h>
-#include <linux/types.h>
-
-/* Use upper 8 bits of the type field for flags */
-#define SMIA_REG_FLAG_FLOAT		(1 << 24)
-
-#define SMIA_REG_8BIT			1
-#define SMIA_REG_16BIT			2
-#define SMIA_REG_32BIT			4
-struct smia_reg {
-	u16 type;
-	u16 reg;			/* 16-bit offset */
-	u32 val;			/* 8/16/32-bit value */
-};
-
-struct smiapp_sensor;
-
-int smiapp_read(struct smiapp_sensor *sensor, u32 reg, u32 *val);
-int smiapp_read_8only(struct smiapp_sensor *sensor, u32 reg, u32 *val);
-int smiapp_write(struct smiapp_sensor *sensor, u32 reg, u32 val);
-
-#endif
diff --git a/drivers/media/video/smiapp/smiapp.h b/drivers/media/video/smiapp/smiapp.h
deleted file mode 100644
index 587f7f1..0000000
--- a/drivers/media/video/smiapp/smiapp.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * drivers/media/video/smiapp/smiapp.h
- *
- * Generic driver for SMIA/SMIA++ compliant camera modules
- *
- * Copyright (C) 2010--2012 Nokia Corporation
- * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __SMIAPP_PRIV_H_
-#define __SMIAPP_PRIV_H_
-
-#include <linux/mutex.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-subdev.h>
-#include <media/smiapp.h>
-
-#include "smiapp-pll.h"
-#include "smiapp-reg.h"
-#include "smiapp-regs.h"
-#include "smiapp-quirk.h"
-
-/*
- * Standard SMIA++ constants
- */
-#define SMIA_VERSION_1			10
-#define SMIAPP_VERSION_0_8		8 /* Draft 0.8 */
-#define SMIAPP_VERSION_0_9		9 /* Draft 0.9 */
-#define SMIAPP_VERSION_1		10
-
-#define SMIAPP_PROFILE_0		0
-#define SMIAPP_PROFILE_1		1
-#define SMIAPP_PROFILE_2		2
-
-#define SMIAPP_NVM_PAGE_SIZE		64	/* bytes */
-
-#define SMIAPP_RESET_DELAY_CLOCKS	2400
-#define SMIAPP_RESET_DELAY(clk)				\
-	(1000 +	(SMIAPP_RESET_DELAY_CLOCKS * 1000	\
-		 + (clk) / 1000 - 1) / ((clk) / 1000))
-
-#include "smiapp-limits.h"
-
-struct smiapp_quirk;
-
-#define SMIAPP_MODULE_IDENT_FLAG_REV_LE		(1 << 0)
-
-struct smiapp_module_ident {
-	u8 manufacturer_id;
-	u16 model_id;
-	u8 revision_number_major;
-
-	u8 flags;
-
-	char *name;
-	const struct smiapp_quirk *quirk;
-};
-
-struct smiapp_module_info {
-	u32 manufacturer_id;
-	u32 model_id;
-	u32 revision_number_major;
-	u32 revision_number_minor;
-
-	u32 module_year;
-	u32 module_month;
-	u32 module_day;
-
-	u32 sensor_manufacturer_id;
-	u32 sensor_model_id;
-	u32 sensor_revision_number;
-	u32 sensor_firmware_version;
-
-	u32 smia_version;
-	u32 smiapp_version;
-
-	u32 smiapp_profile;
-
-	char *name;
-	const struct smiapp_quirk *quirk;
-};
-
-#define SMIAPP_IDENT_FQ(manufacturer, model, rev, fl, _name, _quirk)	\
-	{ .manufacturer_id = manufacturer,				\
-	  .model_id = model,						\
-	  .revision_number_major = rev,					\
-	  .flags = fl,							\
-	  .name = _name,						\
-	  .quirk = _quirk, }
-
-#define SMIAPP_IDENT_LQ(manufacturer, model, rev, _name, _quirk)	\
-	{ .manufacturer_id = manufacturer,				\
-	  .model_id = model,						\
-	  .revision_number_major = rev,					\
-	  .flags = SMIAPP_MODULE_IDENT_FLAG_REV_LE,			\
-	  .name = _name,						\
-	  .quirk = _quirk, }
-
-#define SMIAPP_IDENT_L(manufacturer, model, rev, _name)			\
-	{ .manufacturer_id = manufacturer,				\
-	  .model_id = model,						\
-	  .revision_number_major = rev,					\
-	  .flags = SMIAPP_MODULE_IDENT_FLAG_REV_LE,			\
-	  .name = _name, }
-
-#define SMIAPP_IDENT_Q(manufacturer, model, rev, _name, _quirk)		\
-	{ .manufacturer_id = manufacturer,				\
-	  .model_id = model,						\
-	  .revision_number_major = rev,					\
-	  .flags = 0,							\
-	  .name = _name,						\
-	  .quirk = _quirk, }
-
-#define SMIAPP_IDENT(manufacturer, model, rev, _name)			\
-	{ .manufacturer_id = manufacturer,				\
-	  .model_id = model,						\
-	  .revision_number_major = rev,					\
-	  .flags = 0,							\
-	  .name = _name, }
-
-struct smiapp_reg_limits {
-	u32 addr;
-	char *what;
-};
-
-extern struct smiapp_reg_limits smiapp_reg_limits[];
-
-struct smiapp_csi_data_format {
-	u32 code;
-	u8 width;
-	u8 compressed;
-	u8 pixel_order;
-};
-
-#define SMIAPP_SUBDEVS			3
-
-#define SMIAPP_PA_PAD_SRC		0
-#define SMIAPP_PAD_SINK			0
-#define SMIAPP_PAD_SRC			1
-#define SMIAPP_PADS			2
-
-struct smiapp_binning_subtype {
-	u8 horizontal:4;
-	u8 vertical:4;
-} __packed;
-
-struct smiapp_subdev {
-	struct v4l2_subdev sd;
-	struct media_pad pads[2];
-	struct v4l2_rect sink_fmt;
-	struct v4l2_rect crop[2];
-	struct v4l2_rect compose; /* compose on sink */
-	unsigned short sink_pad;
-	unsigned short source_pad;
-	int npads;
-	struct smiapp_sensor *sensor;
-	struct v4l2_ctrl_handler ctrl_handler;
-};
-
-/*
- * struct smiapp_sensor - Main device structure
- */
-struct smiapp_sensor {
-	/*
-	 * "mutex" is used to serialise access to all fields here
-	 * except v4l2_ctrls at the end of the struct. "mutex" is also
-	 * used to serialise access to file handle specific
-	 * information. The exception to this rule is the power_mutex
-	 * below.
-	 */
-	struct mutex mutex;
-	/*
-	 * power_mutex is used to serialise power management related
-	 * activities. Acquiring "mutex" at that time isn't necessary
-	 * since there are no other users anyway.
-	 */
-	struct mutex power_mutex;
-	struct smiapp_subdev ssds[SMIAPP_SUBDEVS];
-	u32 ssds_used;
-	struct smiapp_subdev *src;
-	struct smiapp_subdev *binner;
-	struct smiapp_subdev *scaler;
-	struct smiapp_subdev *pixel_array;
-	struct smiapp_platform_data *platform_data;
-	struct regulator *vana;
-	struct clk *ext_clk;
-	u32 limits[SMIAPP_LIMIT_LAST];
-	u8 nbinning_subtypes;
-	struct smiapp_binning_subtype binning_subtypes[SMIAPP_BINNING_SUBTYPES];
-	u32 mbus_frame_fmts;
-	const struct smiapp_csi_data_format *csi_format;
-	const struct smiapp_csi_data_format *internal_csi_format;
-	u32 default_mbus_frame_fmts;
-	int default_pixel_order;
-
-	u8 binning_horizontal;
-	u8 binning_vertical;
-
-	u8 scale_m;
-	u8 scaling_mode;
-
-	u8 hvflip_inv_mask; /* H/VFLIP inversion due to sensor orientation */
-	u8 flash_capability;
-	u8 frame_skip;
-
-	int power_count;
-
-	bool streaming;
-	bool dev_init_done;
-
-	u8 *nvm;		/* nvm memory buffer */
-	unsigned int nvm_size;	/* bytes */
-
-	struct smiapp_module_info minfo;
-
-	struct smiapp_pll pll;
-
-	/* Pixel array controls */
-	struct v4l2_ctrl *analog_gain;
-	struct v4l2_ctrl *exposure;
-	struct v4l2_ctrl *hflip;
-	struct v4l2_ctrl *vflip;
-	struct v4l2_ctrl *vblank;
-	struct v4l2_ctrl *hblank;
-	struct v4l2_ctrl *pixel_rate_parray;
-	/* src controls */
-	struct v4l2_ctrl *link_freq;
-	struct v4l2_ctrl *pixel_rate_csi;
-};
-
-#define to_smiapp_subdev(_sd)				\
-	container_of(_sd, struct smiapp_subdev, sd)
-
-#define to_smiapp_sensor(_sd)	\
-	(to_smiapp_subdev(_sd)->sensor)
-
-#endif /* __SMIAPP_PRIV_H_ */
diff --git a/drivers/media/video/sr030pc30.c b/drivers/media/video/sr030pc30.c
deleted file mode 100644
index e9d95bd..0000000
--- a/drivers/media/video/sr030pc30.c
+++ /dev/null
@@ -1,871 +0,0 @@
-/*
- * Driver for SiliconFile SR030PC30 VGA (1/10-Inch) Image Sensor with ISP
- *
- * Copyright (C) 2010 Samsung Electronics Co., Ltd
- * Author: Sylwester Nawrocki, s.nawrocki@samsung.com
- *
- * Based on original driver authored by Dongsoo Nathaniel Kim
- * and HeungJun Kim <riverful.kim@samsung.com>.
- *
- * Based on mt9v011 Micron Digital Image Sensor driver
- * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/i2c.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-subdev.h>
-#include <media/v4l2-mediabus.h>
-#include <media/sr030pc30.h>
-
-static int debug;
-module_param(debug, int, 0644);
-
-#define MODULE_NAME	"SR030PC30"
-
-/*
- * Register offsets within a page
- * b15..b8 - page id, b7..b0 - register address
- */
-#define POWER_CTRL_REG		0x0001
-#define PAGEMODE_REG		0x03
-#define DEVICE_ID_REG		0x0004
-#define NOON010PC30_ID		0x86
-#define SR030PC30_ID		0x8C
-#define VDO_CTL1_REG		0x0010
-#define SUBSAMPL_NONE_VGA	0
-#define SUBSAMPL_QVGA		0x10
-#define SUBSAMPL_QQVGA		0x20
-#define VDO_CTL2_REG		0x0011
-#define SYNC_CTL_REG		0x0012
-#define WIN_ROWH_REG		0x0020
-#define WIN_ROWL_REG		0x0021
-#define WIN_COLH_REG		0x0022
-#define WIN_COLL_REG		0x0023
-#define WIN_HEIGHTH_REG		0x0024
-#define WIN_HEIGHTL_REG		0x0025
-#define WIN_WIDTHH_REG		0x0026
-#define WIN_WIDTHL_REG		0x0027
-#define HBLANKH_REG		0x0040
-#define HBLANKL_REG		0x0041
-#define VSYNCH_REG		0x0042
-#define VSYNCL_REG		0x0043
-/* page 10 */
-#define ISP_CTL_REG(n)		(0x1010 + (n))
-#define YOFS_REG		0x1040
-#define DARK_YOFS_REG		0x1041
-#define AG_ABRTH_REG		0x1050
-#define SAT_CTL_REG		0x1060
-#define BSAT_REG		0x1061
-#define RSAT_REG		0x1062
-#define AG_SAT_TH_REG		0x1063
-/* page 11 */
-#define ZLPF_CTRL_REG		0x1110
-#define ZLPF_CTRL2_REG		0x1112
-#define ZLPF_AGH_THR_REG	0x1121
-#define ZLPF_THR_REG		0x1160
-#define ZLPF_DYN_THR_REG	0x1160
-/* page 12 */
-#define YCLPF_CTL1_REG		0x1240
-#define YCLPF_CTL2_REG		0x1241
-#define YCLPF_THR_REG		0x1250
-#define BLPF_CTL_REG		0x1270
-#define BLPF_THR1_REG		0x1274
-#define BLPF_THR2_REG		0x1275
-/* page 14 - Lens Shading Compensation */
-#define LENS_CTRL_REG		0x1410
-#define LENS_XCEN_REG		0x1420
-#define LENS_YCEN_REG		0x1421
-#define LENS_R_COMP_REG		0x1422
-#define LENS_G_COMP_REG		0x1423
-#define LENS_B_COMP_REG		0x1424
-/* page 15 - Color correction */
-#define CMC_CTL_REG		0x1510
-#define CMC_OFSGH_REG		0x1514
-#define CMC_OFSGL_REG		0x1516
-#define CMC_SIGN_REG		0x1517
-/* Color correction coefficients */
-#define CMC_COEF_REG(n)		(0x1530 + (n))
-/* Color correction offset coefficients */
-#define CMC_OFS_REG(n)		(0x1540 + (n))
-/* page 16 - Gamma correction */
-#define GMA_CTL_REG		0x1610
-/* Gamma correction coefficients 0.14 */
-#define GMA_COEF_REG(n)		(0x1630 + (n))
-/* page 20 - Auto Exposure */
-#define AE_CTL1_REG		0x2010
-#define AE_CTL2_REG		0x2011
-#define AE_FRM_CTL_REG		0x2020
-#define AE_FINE_CTL_REG(n)	(0x2028 + (n))
-#define EXP_TIMEH_REG		0x2083
-#define EXP_TIMEM_REG		0x2084
-#define EXP_TIMEL_REG		0x2085
-#define EXP_MMINH_REG		0x2086
-#define EXP_MMINL_REG		0x2087
-#define EXP_MMAXH_REG		0x2088
-#define EXP_MMAXM_REG		0x2089
-#define EXP_MMAXL_REG		0x208A
-/* page 22 - Auto White Balance */
-#define AWB_CTL1_REG		0x2210
-#define AWB_ENABLE		0x80
-#define AWB_CTL2_REG		0x2211
-#define MWB_ENABLE		0x01
-/* RGB gain control (manual WB) when AWB_CTL1[7]=0 */
-#define AWB_RGAIN_REG		0x2280
-#define AWB_GGAIN_REG		0x2281
-#define AWB_BGAIN_REG		0x2282
-#define AWB_RMAX_REG		0x2283
-#define AWB_RMIN_REG		0x2284
-#define AWB_BMAX_REG		0x2285
-#define AWB_BMIN_REG		0x2286
-/* R, B gain range in bright light conditions */
-#define AWB_RMAXB_REG		0x2287
-#define AWB_RMINB_REG		0x2288
-#define AWB_BMAXB_REG		0x2289
-#define AWB_BMINB_REG		0x228A
-/* manual white balance, when AWB_CTL2[0]=1 */
-#define MWB_RGAIN_REG		0x22B2
-#define MWB_BGAIN_REG		0x22B3
-/* the token to mark an array end */
-#define REG_TERM		0xFFFF
-
-/* Minimum and maximum exposure time in ms */
-#define EXPOS_MIN_MS		1
-#define EXPOS_MAX_MS		125
-
-struct sr030pc30_info {
-	struct v4l2_subdev sd;
-	const struct sr030pc30_platform_data *pdata;
-	const struct sr030pc30_format *curr_fmt;
-	const struct sr030pc30_frmsize *curr_win;
-	unsigned int auto_wb:1;
-	unsigned int auto_exp:1;
-	unsigned int hflip:1;
-	unsigned int vflip:1;
-	unsigned int sleep:1;
-	unsigned int exposure;
-	u8 blue_balance;
-	u8 red_balance;
-	u8 i2c_reg_page;
-};
-
-struct sr030pc30_format {
-	enum v4l2_mbus_pixelcode code;
-	enum v4l2_colorspace colorspace;
-	u16 ispctl1_reg;
-};
-
-struct sr030pc30_frmsize {
-	u16 width;
-	u16 height;
-	int vid_ctl1;
-};
-
-struct i2c_regval {
-	u16 addr;
-	u16 val;
-};
-
-static const struct v4l2_queryctrl sr030pc30_ctrl[] = {
-	{
-		.id		= V4L2_CID_AUTO_WHITE_BALANCE,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Auto White Balance",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 1,
-	}, {
-		.id		= V4L2_CID_RED_BALANCE,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Red Balance",
-		.minimum	= 0,
-		.maximum	= 127,
-		.step		= 1,
-		.default_value	= 64,
-		.flags		= 0,
-	}, {
-		.id		= V4L2_CID_BLUE_BALANCE,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Blue Balance",
-		.minimum	= 0,
-		.maximum	= 127,
-		.step		= 1,
-		.default_value	= 64,
-	}, {
-		.id		= V4L2_CID_EXPOSURE_AUTO,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Auto Exposure",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 1,
-	}, {
-		.id		= V4L2_CID_EXPOSURE,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Exposure",
-		.minimum	= EXPOS_MIN_MS,
-		.maximum	= EXPOS_MAX_MS,
-		.step		= 1,
-		.default_value	= 1,
-	}, {
-	}
-};
-
-/* supported resolutions */
-static const struct sr030pc30_frmsize sr030pc30_sizes[] = {
-	{
-		.width		= 640,
-		.height		= 480,
-		.vid_ctl1	= SUBSAMPL_NONE_VGA,
-	}, {
-		.width		= 320,
-		.height		= 240,
-		.vid_ctl1	= SUBSAMPL_QVGA,
-	}, {
-		.width		= 160,
-		.height		= 120,
-		.vid_ctl1	= SUBSAMPL_QQVGA,
-	},
-};
-
-/* supported pixel formats */
-static const struct sr030pc30_format sr030pc30_formats[] = {
-	{
-		.code		= V4L2_MBUS_FMT_YUYV8_2X8,
-		.colorspace	= V4L2_COLORSPACE_JPEG,
-		.ispctl1_reg	= 0x03,
-	}, {
-		.code		= V4L2_MBUS_FMT_YVYU8_2X8,
-		.colorspace	= V4L2_COLORSPACE_JPEG,
-		.ispctl1_reg	= 0x02,
-	}, {
-		.code		= V4L2_MBUS_FMT_VYUY8_2X8,
-		.colorspace	= V4L2_COLORSPACE_JPEG,
-		.ispctl1_reg	= 0,
-	}, {
-		.code		= V4L2_MBUS_FMT_UYVY8_2X8,
-		.colorspace	= V4L2_COLORSPACE_JPEG,
-		.ispctl1_reg	= 0x01,
-	}, {
-		.code		= V4L2_MBUS_FMT_RGB565_2X8_BE,
-		.colorspace	= V4L2_COLORSPACE_JPEG,
-		.ispctl1_reg	= 0x40,
-	},
-};
-
-static const struct i2c_regval sr030pc30_base_regs[] = {
-	/* Window size and position within pixel matrix */
-	{ WIN_ROWH_REG,		0x00 }, { WIN_ROWL_REG,		0x06 },
-	{ WIN_COLH_REG,		0x00 },	{ WIN_COLL_REG,		0x06 },
-	{ WIN_HEIGHTH_REG,	0x01 }, { WIN_HEIGHTL_REG,	0xE0 },
-	{ WIN_WIDTHH_REG,	0x02 }, { WIN_WIDTHL_REG,	0x80 },
-	{ HBLANKH_REG,		0x01 }, { HBLANKL_REG,		0x50 },
-	{ VSYNCH_REG,		0x00 }, { VSYNCL_REG,		0x14 },
-	{ SYNC_CTL_REG,		0 },
-	/* Color corection and saturation */
-	{ ISP_CTL_REG(0),	0x30 }, { YOFS_REG,		0x80 },
-	{ DARK_YOFS_REG,	0x04 }, { AG_ABRTH_REG,		0x78 },
-	{ SAT_CTL_REG,		0x1F }, { BSAT_REG,		0x90 },
-	{ AG_SAT_TH_REG,	0xF0 }, { 0x1064,		0x80 },
-	{ CMC_CTL_REG,		0x03 }, { CMC_OFSGH_REG,	0x3C },
-	{ CMC_OFSGL_REG,	0x2C }, { CMC_SIGN_REG,		0x2F },
-	{ CMC_COEF_REG(0),	0xCB }, { CMC_OFS_REG(0),	0x87 },
-	{ CMC_COEF_REG(1),	0x61 }, { CMC_OFS_REG(1),	0x18 },
-	{ CMC_COEF_REG(2),	0x16 }, { CMC_OFS_REG(2),	0x91 },
-	{ CMC_COEF_REG(3),	0x23 }, { CMC_OFS_REG(3),	0x94 },
-	{ CMC_COEF_REG(4),	0xCE }, { CMC_OFS_REG(4),	0x9f },
-	{ CMC_COEF_REG(5),	0x2B }, { CMC_OFS_REG(5),	0x33 },
-	{ CMC_COEF_REG(6),	0x01 }, { CMC_OFS_REG(6),	0x00 },
-	{ CMC_COEF_REG(7),	0x34 }, { CMC_OFS_REG(7),	0x94 },
-	{ CMC_COEF_REG(8),	0x75 }, { CMC_OFS_REG(8),	0x14 },
-	/* Color corection coefficients */
-	{ GMA_CTL_REG,		0x03 },	{ GMA_COEF_REG(0),	0x00 },
-	{ GMA_COEF_REG(1),	0x19 },	{ GMA_COEF_REG(2),	0x26 },
-	{ GMA_COEF_REG(3),	0x3B },	{ GMA_COEF_REG(4),	0x5D },
-	{ GMA_COEF_REG(5),	0x79 }, { GMA_COEF_REG(6),	0x8E },
-	{ GMA_COEF_REG(7),	0x9F },	{ GMA_COEF_REG(8),	0xAF },
-	{ GMA_COEF_REG(9),	0xBD },	{ GMA_COEF_REG(10),	0xCA },
-	{ GMA_COEF_REG(11),	0xDD }, { GMA_COEF_REG(12),	0xEC },
-	{ GMA_COEF_REG(13),	0xF7 },	{ GMA_COEF_REG(14),	0xFF },
-	/* Noise reduction, Z-LPF, YC-LPF and BLPF filters setup */
-	{ ZLPF_CTRL_REG,	0x99 }, { ZLPF_CTRL2_REG,	0x0E },
-	{ ZLPF_AGH_THR_REG,	0x29 }, { ZLPF_THR_REG,		0x0F },
-	{ ZLPF_DYN_THR_REG,	0x63 }, { YCLPF_CTL1_REG,	0x23 },
-	{ YCLPF_CTL2_REG,	0x3B }, { YCLPF_THR_REG,	0x05 },
-	{ BLPF_CTL_REG,		0x1D }, { BLPF_THR1_REG,	0x05 },
-	{ BLPF_THR2_REG,	0x04 },
-	/* Automatic white balance */
-	{ AWB_CTL1_REG,		0xFB }, { AWB_CTL2_REG,		0x26 },
-	{ AWB_RMAX_REG,		0x54 }, { AWB_RMIN_REG,		0x2B },
-	{ AWB_BMAX_REG,		0x57 }, { AWB_BMIN_REG,		0x29 },
-	{ AWB_RMAXB_REG,	0x50 }, { AWB_RMINB_REG,	0x43 },
-	{ AWB_BMAXB_REG,	0x30 }, { AWB_BMINB_REG,	0x22 },
-	/* Auto exposure */
-	{ AE_CTL1_REG,		0x8C }, { AE_CTL2_REG,		0x04 },
-	{ AE_FRM_CTL_REG,	0x01 }, { AE_FINE_CTL_REG(0),	0x3F },
-	{ AE_FINE_CTL_REG(1),	0xA3 }, { AE_FINE_CTL_REG(3),	0x34 },
-	/* Lens shading compensation */
-	{ LENS_CTRL_REG,	0x01 }, { LENS_XCEN_REG,	0x80 },
-	{ LENS_YCEN_REG,	0x70 }, { LENS_R_COMP_REG,	0x53 },
-	{ LENS_G_COMP_REG,	0x40 }, { LENS_B_COMP_REG,	0x3e },
-	{ REG_TERM,		0 },
-};
-
-static inline struct sr030pc30_info *to_sr030pc30(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct sr030pc30_info, sd);
-}
-
-static inline int set_i2c_page(struct sr030pc30_info *info,
-			       struct i2c_client *client, unsigned int reg)
-{
-	int ret = 0;
-	u32 page = reg >> 8 & 0xFF;
-
-	if (info->i2c_reg_page != page && (reg & 0xFF) != 0x03) {
-		ret = i2c_smbus_write_byte_data(client, PAGEMODE_REG, page);
-		if (!ret)
-			info->i2c_reg_page = page;
-	}
-	return ret;
-}
-
-static int cam_i2c_read(struct v4l2_subdev *sd, u32 reg_addr)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-
-	int ret = set_i2c_page(info, client, reg_addr);
-	if (!ret)
-		ret = i2c_smbus_read_byte_data(client, reg_addr & 0xFF);
-	return ret;
-}
-
-static int cam_i2c_write(struct v4l2_subdev *sd, u32 reg_addr, u32 val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-
-	int ret = set_i2c_page(info, client, reg_addr);
-	if (!ret)
-		ret = i2c_smbus_write_byte_data(
-			client, reg_addr & 0xFF, val);
-	return ret;
-}
-
-static inline int sr030pc30_bulk_write_reg(struct v4l2_subdev *sd,
-				const struct i2c_regval *msg)
-{
-	while (msg->addr != REG_TERM) {
-		int ret = cam_i2c_write(sd, msg->addr, msg->val);
-		if (ret)
-			return ret;
-		msg++;
-	}
-	return 0;
-}
-
-/* Device reset and sleep mode control */
-static int sr030pc30_pwr_ctrl(struct v4l2_subdev *sd,
-				     bool reset, bool sleep)
-{
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-	u8 reg = sleep ? 0xF1 : 0xF0;
-	int ret = 0;
-
-	if (reset)
-		ret = cam_i2c_write(sd, POWER_CTRL_REG, reg | 0x02);
-	if (!ret) {
-		ret = cam_i2c_write(sd, POWER_CTRL_REG, reg);
-		if (!ret) {
-			info->sleep = sleep;
-			if (reset)
-				info->i2c_reg_page = -1;
-		}
-	}
-	return ret;
-}
-
-static inline int sr030pc30_enable_autoexposure(struct v4l2_subdev *sd, int on)
-{
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-	/* auto anti-flicker is also enabled here */
-	int ret = cam_i2c_write(sd, AE_CTL1_REG, on ? 0xDC : 0x0C);
-	if (!ret)
-		info->auto_exp = on;
-	return ret;
-}
-
-static int sr030pc30_set_exposure(struct v4l2_subdev *sd, int value)
-{
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-
-	unsigned long expos = value * info->pdata->clk_rate / (8 * 1000);
-
-	int ret = cam_i2c_write(sd, EXP_TIMEH_REG, expos >> 16 & 0xFF);
-	if (!ret)
-		ret = cam_i2c_write(sd, EXP_TIMEM_REG, expos >> 8 & 0xFF);
-	if (!ret)
-		ret = cam_i2c_write(sd, EXP_TIMEL_REG, expos & 0xFF);
-	if (!ret) { /* Turn off AE */
-		info->exposure = value;
-		ret = sr030pc30_enable_autoexposure(sd, 0);
-	}
-	return ret;
-}
-
-/* Automatic white balance control */
-static int sr030pc30_enable_autowhitebalance(struct v4l2_subdev *sd, int on)
-{
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-
-	int ret = cam_i2c_write(sd, AWB_CTL2_REG, on ? 0x2E : 0x2F);
-	if (!ret)
-		ret = cam_i2c_write(sd, AWB_CTL1_REG, on ? 0xFB : 0x7B);
-	if (!ret)
-		info->auto_wb = on;
-
-	return ret;
-}
-
-static int sr030pc30_set_flip(struct v4l2_subdev *sd)
-{
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-
-	s32 reg = cam_i2c_read(sd, VDO_CTL2_REG);
-	if (reg < 0)
-		return reg;
-
-	reg &= 0x7C;
-	if (info->hflip)
-		reg |= 0x01;
-	if (info->vflip)
-		reg |= 0x02;
-	return cam_i2c_write(sd, VDO_CTL2_REG, reg | 0x80);
-}
-
-/* Configure resolution, color format and image flip */
-static int sr030pc30_set_params(struct v4l2_subdev *sd)
-{
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-	int ret;
-
-	if (!info->curr_win)
-		return -EINVAL;
-
-	/* Configure the resolution through subsampling */
-	ret = cam_i2c_write(sd, VDO_CTL1_REG,
-			    info->curr_win->vid_ctl1);
-
-	if (!ret && info->curr_fmt)
-		ret = cam_i2c_write(sd, ISP_CTL_REG(0),
-				info->curr_fmt->ispctl1_reg);
-	if (!ret)
-		ret = sr030pc30_set_flip(sd);
-
-	return ret;
-}
-
-/* Find nearest matching image pixel size. */
-static int sr030pc30_try_frame_size(struct v4l2_mbus_framefmt *mf)
-{
-	unsigned int min_err = ~0;
-	int i = ARRAY_SIZE(sr030pc30_sizes);
-	const struct sr030pc30_frmsize *fsize = &sr030pc30_sizes[0],
-					*match = NULL;
-	while (i--) {
-		int err = abs(fsize->width - mf->width)
-				+ abs(fsize->height - mf->height);
-		if (err < min_err) {
-			min_err = err;
-			match = fsize;
-		}
-		fsize++;
-	}
-	if (match) {
-		mf->width  = match->width;
-		mf->height = match->height;
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static int sr030pc30_queryctrl(struct v4l2_subdev *sd,
-			       struct v4l2_queryctrl *qc)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(sr030pc30_ctrl); i++)
-		if (qc->id == sr030pc30_ctrl[i].id) {
-			*qc = sr030pc30_ctrl[i];
-			v4l2_dbg(1, debug, sd, "%s id: %d\n",
-				 __func__, qc->id);
-			return 0;
-		}
-
-	return -EINVAL;
-}
-
-static inline int sr030pc30_set_bluebalance(struct v4l2_subdev *sd, int value)
-{
-	int ret = cam_i2c_write(sd, MWB_BGAIN_REG, value);
-	if (!ret)
-		to_sr030pc30(sd)->blue_balance = value;
-	return ret;
-}
-
-static inline int sr030pc30_set_redbalance(struct v4l2_subdev *sd, int value)
-{
-	int ret = cam_i2c_write(sd, MWB_RGAIN_REG, value);
-	if (!ret)
-		to_sr030pc30(sd)->red_balance = value;
-	return ret;
-}
-
-static int sr030pc30_s_ctrl(struct v4l2_subdev *sd,
-			    struct v4l2_control *ctrl)
-{
-	int i, ret = 0;
-
-	for (i = 0; i < ARRAY_SIZE(sr030pc30_ctrl); i++)
-		if (ctrl->id == sr030pc30_ctrl[i].id)
-			break;
-
-	if (i == ARRAY_SIZE(sr030pc30_ctrl))
-		return -EINVAL;
-
-	if (ctrl->value < sr030pc30_ctrl[i].minimum ||
-		ctrl->value > sr030pc30_ctrl[i].maximum)
-			return -ERANGE;
-
-	v4l2_dbg(1, debug, sd, "%s: ctrl_id: %d, value: %d\n",
-			 __func__, ctrl->id, ctrl->value);
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUTO_WHITE_BALANCE:
-		sr030pc30_enable_autowhitebalance(sd, ctrl->value);
-		break;
-	case V4L2_CID_BLUE_BALANCE:
-		ret = sr030pc30_set_bluebalance(sd, ctrl->value);
-		break;
-	case V4L2_CID_RED_BALANCE:
-		ret = sr030pc30_set_redbalance(sd, ctrl->value);
-		break;
-	case V4L2_CID_EXPOSURE_AUTO:
-		sr030pc30_enable_autoexposure(sd,
-			ctrl->value == V4L2_EXPOSURE_AUTO);
-		break;
-	case V4L2_CID_EXPOSURE:
-		ret = sr030pc30_set_exposure(sd, ctrl->value);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return ret;
-}
-
-static int sr030pc30_g_ctrl(struct v4l2_subdev *sd,
-			    struct v4l2_control *ctrl)
-{
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-
-	v4l2_dbg(1, debug, sd, "%s: id: %d\n", __func__, ctrl->id);
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUTO_WHITE_BALANCE:
-		ctrl->value = info->auto_wb;
-		break;
-	case V4L2_CID_BLUE_BALANCE:
-		ctrl->value = info->blue_balance;
-		break;
-	case V4L2_CID_RED_BALANCE:
-		ctrl->value = info->red_balance;
-		break;
-	case V4L2_CID_EXPOSURE_AUTO:
-		ctrl->value = info->auto_exp;
-		break;
-	case V4L2_CID_EXPOSURE:
-		ctrl->value = info->exposure;
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int sr030pc30_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
-			      enum v4l2_mbus_pixelcode *code)
-{
-	if (!code || index >= ARRAY_SIZE(sr030pc30_formats))
-		return -EINVAL;
-
-	*code = sr030pc30_formats[index].code;
-	return 0;
-}
-
-static int sr030pc30_g_fmt(struct v4l2_subdev *sd,
-			   struct v4l2_mbus_framefmt *mf)
-{
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-	int ret;
-
-	if (!mf)
-		return -EINVAL;
-
-	if (!info->curr_win || !info->curr_fmt) {
-		ret = sr030pc30_set_params(sd);
-		if (ret)
-			return ret;
-	}
-
-	mf->width	= info->curr_win->width;
-	mf->height	= info->curr_win->height;
-	mf->code	= info->curr_fmt->code;
-	mf->colorspace	= info->curr_fmt->colorspace;
-	mf->field	= V4L2_FIELD_NONE;
-
-	return 0;
-}
-
-/* Return nearest media bus frame format. */
-static const struct sr030pc30_format *try_fmt(struct v4l2_subdev *sd,
-					      struct v4l2_mbus_framefmt *mf)
-{
-	int i = ARRAY_SIZE(sr030pc30_formats);
-
-	sr030pc30_try_frame_size(mf);
-
-	while (i--)
-		if (mf->code == sr030pc30_formats[i].code)
-			break;
-
-	mf->code = sr030pc30_formats[i].code;
-
-	return &sr030pc30_formats[i];
-}
-
-/* Return nearest media bus frame format. */
-static int sr030pc30_try_fmt(struct v4l2_subdev *sd,
-			     struct v4l2_mbus_framefmt *mf)
-{
-	if (!sd || !mf)
-		return -EINVAL;
-
-	try_fmt(sd, mf);
-	return 0;
-}
-
-static int sr030pc30_s_fmt(struct v4l2_subdev *sd,
-			   struct v4l2_mbus_framefmt *mf)
-{
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-
-	if (!sd || !mf)
-		return -EINVAL;
-
-	info->curr_fmt = try_fmt(sd, mf);
-
-	return sr030pc30_set_params(sd);
-}
-
-static int sr030pc30_base_config(struct v4l2_subdev *sd)
-{
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-	int ret;
-	unsigned long expmin, expmax;
-
-	ret = sr030pc30_bulk_write_reg(sd, sr030pc30_base_regs);
-	if (!ret) {
-		info->curr_fmt = &sr030pc30_formats[0];
-		info->curr_win = &sr030pc30_sizes[0];
-		ret = sr030pc30_set_params(sd);
-	}
-	if (!ret)
-		ret = sr030pc30_pwr_ctrl(sd, false, false);
-
-	if (!ret && !info->pdata)
-		return ret;
-
-	expmin = EXPOS_MIN_MS * info->pdata->clk_rate / (8 * 1000);
-	expmax = EXPOS_MAX_MS * info->pdata->clk_rate / (8 * 1000);
-
-	v4l2_dbg(1, debug, sd, "%s: expmin= %lx, expmax= %lx", __func__,
-		 expmin, expmax);
-
-	/* Setting up manual exposure time range */
-	ret = cam_i2c_write(sd, EXP_MMINH_REG, expmin >> 8 & 0xFF);
-	if (!ret)
-		ret = cam_i2c_write(sd, EXP_MMINL_REG, expmin & 0xFF);
-	if (!ret)
-		ret = cam_i2c_write(sd, EXP_MMAXH_REG, expmax >> 16 & 0xFF);
-	if (!ret)
-		ret = cam_i2c_write(sd, EXP_MMAXM_REG, expmax >> 8 & 0xFF);
-	if (!ret)
-		ret = cam_i2c_write(sd, EXP_MMAXL_REG, expmax & 0xFF);
-
-	return ret;
-}
-
-static int sr030pc30_s_power(struct v4l2_subdev *sd, int on)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-	const struct sr030pc30_platform_data *pdata = info->pdata;
-	int ret;
-
-	if (pdata == NULL) {
-		WARN(1, "No platform data!\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * Put sensor into power sleep mode before switching off
-	 * power and disabling MCLK.
-	 */
-	if (!on)
-		sr030pc30_pwr_ctrl(sd, false, true);
-
-	/* set_power controls sensor's power and clock */
-	if (pdata->set_power) {
-		ret = pdata->set_power(&client->dev, on);
-		if (ret)
-			return ret;
-	}
-
-	if (on) {
-		ret = sr030pc30_base_config(sd);
-	} else {
-		ret = 0;
-		info->curr_win = NULL;
-		info->curr_fmt = NULL;
-	}
-
-	return ret;
-}
-
-static const struct v4l2_subdev_core_ops sr030pc30_core_ops = {
-	.s_power	= sr030pc30_s_power,
-	.queryctrl	= sr030pc30_queryctrl,
-	.s_ctrl		= sr030pc30_s_ctrl,
-	.g_ctrl		= sr030pc30_g_ctrl,
-};
-
-static const struct v4l2_subdev_video_ops sr030pc30_video_ops = {
-	.g_mbus_fmt	= sr030pc30_g_fmt,
-	.s_mbus_fmt	= sr030pc30_s_fmt,
-	.try_mbus_fmt	= sr030pc30_try_fmt,
-	.enum_mbus_fmt	= sr030pc30_enum_fmt,
-};
-
-static const struct v4l2_subdev_ops sr030pc30_ops = {
-	.core	= &sr030pc30_core_ops,
-	.video	= &sr030pc30_video_ops,
-};
-
-/*
- * Detect sensor type. Return 0 if SR030PC30 was detected
- * or -ENODEV otherwise.
- */
-static int sr030pc30_detect(struct i2c_client *client)
-{
-	const struct sr030pc30_platform_data *pdata
-		= client->dev.platform_data;
-	int ret;
-
-	/* Enable sensor's power and clock */
-	if (pdata->set_power) {
-		ret = pdata->set_power(&client->dev, 1);
-		if (ret)
-			return ret;
-	}
-
-	ret = i2c_smbus_read_byte_data(client, DEVICE_ID_REG);
-
-	if (pdata->set_power)
-		pdata->set_power(&client->dev, 0);
-
-	if (ret < 0) {
-		dev_err(&client->dev, "%s: I2C read failed\n", __func__);
-		return ret;
-	}
-
-	return ret == SR030PC30_ID ? 0 : -ENODEV;
-}
-
-
-static int sr030pc30_probe(struct i2c_client *client,
-			   const struct i2c_device_id *id)
-{
-	struct sr030pc30_info *info;
-	struct v4l2_subdev *sd;
-	const struct sr030pc30_platform_data *pdata
-		= client->dev.platform_data;
-	int ret;
-
-	if (!pdata) {
-		dev_err(&client->dev, "No platform data!");
-		return -EIO;
-	}
-
-	ret = sr030pc30_detect(client);
-	if (ret)
-		return ret;
-
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
-	if (!info)
-		return -ENOMEM;
-
-	sd = &info->sd;
-	strcpy(sd->name, MODULE_NAME);
-	info->pdata = client->dev.platform_data;
-
-	v4l2_i2c_subdev_init(sd, client, &sr030pc30_ops);
-
-	info->i2c_reg_page	= -1;
-	info->hflip		= 1;
-	info->auto_exp		= 1;
-	info->exposure		= 30;
-
-	return 0;
-}
-
-static int sr030pc30_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-
-	v4l2_device_unregister_subdev(sd);
-	kfree(info);
-	return 0;
-}
-
-static const struct i2c_device_id sr030pc30_id[] = {
-	{ MODULE_NAME, 0 },
-	{ },
-};
-MODULE_DEVICE_TABLE(i2c, sr030pc30_id);
-
-
-static struct i2c_driver sr030pc30_i2c_driver = {
-	.driver = {
-		.name = MODULE_NAME
-	},
-	.probe		= sr030pc30_probe,
-	.remove		= sr030pc30_remove,
-	.id_table	= sr030pc30_id,
-};
-
-module_i2c_driver(sr030pc30_i2c_driver);
-
-MODULE_DESCRIPTION("Siliconfile SR030PC30 camera driver");
-MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/tcm825x.c b/drivers/media/video/tcm825x.c
deleted file mode 100644
index 462caa4..0000000
--- a/drivers/media/video/tcm825x.c
+++ /dev/null
@@ -1,937 +0,0 @@
-/*
- * drivers/media/video/tcm825x.c
- *
- * TCM825X camera sensor driver.
- *
- * Copyright (C) 2007 Nokia Corporation.
- *
- * Contact: Sakari Ailus <sakari.ailus@nokia.com>
- *
- * Based on code from David Cohen <david.cohen@indt.org.br>
- *
- * This driver was based on ov9640 sensor driver from MontaVista
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#include <linux/i2c.h>
-#include <linux/module.h>
-#include <media/v4l2-int-device.h>
-
-#include "tcm825x.h"
-
-/*
- * The sensor has two fps modes: the lower one just gives half the fps
- * at the same xclk than the high one.
- */
-#define MAX_FPS 30
-#define MIN_FPS 8
-#define MAX_HALF_FPS (MAX_FPS / 2)
-#define HIGH_FPS_MODE_LOWER_LIMIT 14
-#define DEFAULT_FPS MAX_HALF_FPS
-
-struct tcm825x_sensor {
-	const struct tcm825x_platform_data *platform_data;
-	struct v4l2_int_device *v4l2_int_device;
-	struct i2c_client *i2c_client;
-	struct v4l2_pix_format pix;
-	struct v4l2_fract timeperframe;
-};
-
-/* list of image formats supported by TCM825X sensor */
-static const struct v4l2_fmtdesc tcm825x_formats[] = {
-	{
-		.description = "YUYV (YUV 4:2:2), packed",
-		.pixelformat = V4L2_PIX_FMT_UYVY,
-	}, {
-		/* Note:  V4L2 defines RGB565 as:
-		 *
-		 *      Byte 0                    Byte 1
-		 *      g2 g1 g0 r4 r3 r2 r1 r0   b4 b3 b2 b1 b0 g5 g4 g3
-		 *
-		 * We interpret RGB565 as:
-		 *
-		 *      Byte 0                    Byte 1
-		 *      g2 g1 g0 b4 b3 b2 b1 b0   r4 r3 r2 r1 r0 g5 g4 g3
-		 */
-		.description = "RGB565, le",
-		.pixelformat = V4L2_PIX_FMT_RGB565,
-	},
-};
-
-#define TCM825X_NUM_CAPTURE_FORMATS	ARRAY_SIZE(tcm825x_formats)
-
-/*
- * TCM825X register configuration for all combinations of pixel format and
- * image size
- */
-static const struct tcm825x_reg subqcif	=	{ 0x20, TCM825X_PICSIZ };
-static const struct tcm825x_reg qcif	=	{ 0x18, TCM825X_PICSIZ };
-static const struct tcm825x_reg cif	=	{ 0x14, TCM825X_PICSIZ };
-static const struct tcm825x_reg qqvga	=	{ 0x0c, TCM825X_PICSIZ };
-static const struct tcm825x_reg qvga	=	{ 0x04, TCM825X_PICSIZ };
-static const struct tcm825x_reg vga	=	{ 0x00, TCM825X_PICSIZ };
-
-static const struct tcm825x_reg yuv422	=	{ 0x00, TCM825X_PICFMT };
-static const struct tcm825x_reg rgb565	=	{ 0x02, TCM825X_PICFMT };
-
-/* Our own specific controls */
-#define V4L2_CID_ALC				V4L2_CID_PRIVATE_BASE
-#define V4L2_CID_H_EDGE_EN			V4L2_CID_PRIVATE_BASE + 1
-#define V4L2_CID_V_EDGE_EN			V4L2_CID_PRIVATE_BASE + 2
-#define V4L2_CID_LENS				V4L2_CID_PRIVATE_BASE + 3
-#define V4L2_CID_MAX_EXPOSURE_TIME		V4L2_CID_PRIVATE_BASE + 4
-#define V4L2_CID_LAST_PRIV			V4L2_CID_MAX_EXPOSURE_TIME
-
-/*  Video controls  */
-static struct vcontrol {
-	struct v4l2_queryctrl qc;
-	u16 reg;
-	u16 start_bit;
-} video_control[] = {
-	{
-		{
-			.id = V4L2_CID_GAIN,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "Gain",
-			.minimum = 0,
-			.maximum = 63,
-			.step = 1,
-		},
-		.reg = TCM825X_AG,
-		.start_bit = 0,
-	},
-	{
-		{
-			.id = V4L2_CID_RED_BALANCE,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "Red Balance",
-			.minimum = 0,
-			.maximum = 255,
-			.step = 1,
-		},
-		.reg = TCM825X_MRG,
-		.start_bit = 0,
-	},
-	{
-		{
-			.id = V4L2_CID_BLUE_BALANCE,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "Blue Balance",
-			.minimum = 0,
-			.maximum = 255,
-			.step = 1,
-		},
-		.reg = TCM825X_MBG,
-		.start_bit = 0,
-	},
-	{
-		{
-			.id = V4L2_CID_AUTO_WHITE_BALANCE,
-			.type = V4L2_CTRL_TYPE_BOOLEAN,
-			.name = "Auto White Balance",
-			.minimum = 0,
-			.maximum = 1,
-			.step = 0,
-		},
-		.reg = TCM825X_AWBSW,
-		.start_bit = 7,
-	},
-	{
-		{
-			.id = V4L2_CID_EXPOSURE,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "Exposure Time",
-			.minimum = 0,
-			.maximum = 0x1fff,
-			.step = 1,
-		},
-		.reg = TCM825X_ESRSPD_U,
-		.start_bit = 0,
-	},
-	{
-		{
-			.id = V4L2_CID_HFLIP,
-			.type = V4L2_CTRL_TYPE_BOOLEAN,
-			.name = "Mirror Image",
-			.minimum = 0,
-			.maximum = 1,
-			.step = 0,
-		},
-		.reg = TCM825X_H_INV,
-		.start_bit = 6,
-	},
-	{
-		{
-			.id = V4L2_CID_VFLIP,
-			.type = V4L2_CTRL_TYPE_BOOLEAN,
-			.name = "Vertical Flip",
-			.minimum = 0,
-			.maximum = 1,
-			.step = 0,
-		},
-		.reg = TCM825X_V_INV,
-		.start_bit = 7,
-	},
-	/* Private controls */
-	{
-		{
-			.id = V4L2_CID_ALC,
-			.type = V4L2_CTRL_TYPE_BOOLEAN,
-			.name = "Auto Luminance Control",
-			.minimum = 0,
-			.maximum = 1,
-			.step = 0,
-		},
-		.reg = TCM825X_ALCSW,
-		.start_bit = 7,
-	},
-	{
-		{
-			.id = V4L2_CID_H_EDGE_EN,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "Horizontal Edge Enhancement",
-			.minimum = 0,
-			.maximum = 0xff,
-			.step = 1,
-		},
-		.reg = TCM825X_HDTG,
-		.start_bit = 0,
-	},
-	{
-		{
-			.id = V4L2_CID_V_EDGE_EN,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "Vertical Edge Enhancement",
-			.minimum = 0,
-			.maximum = 0xff,
-			.step = 1,
-		},
-		.reg = TCM825X_VDTG,
-		.start_bit = 0,
-	},
-	{
-		{
-			.id = V4L2_CID_LENS,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "Lens Shading Compensation",
-			.minimum = 0,
-			.maximum = 0x3f,
-			.step = 1,
-		},
-		.reg = TCM825X_LENS,
-		.start_bit = 0,
-	},
-	{
-		{
-			.id = V4L2_CID_MAX_EXPOSURE_TIME,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "Maximum Exposure Time",
-			.minimum = 0,
-			.maximum = 0x3,
-			.step = 1,
-		},
-		.reg = TCM825X_ESRLIM,
-		.start_bit = 5,
-	},
-};
-
-
-static const struct tcm825x_reg *tcm825x_siz_reg[NUM_IMAGE_SIZES] =
-{ &subqcif, &qqvga, &qcif, &qvga, &cif, &vga };
-
-static const struct tcm825x_reg *tcm825x_fmt_reg[NUM_PIXEL_FORMATS] =
-{ &yuv422, &rgb565 };
-
-/*
- * Read a value from a register in an TCM825X sensor device.  The value is
- * returned in 'val'.
- * Returns zero if successful, or non-zero otherwise.
- */
-static int tcm825x_read_reg(struct i2c_client *client, int reg)
-{
-	int err;
-	struct i2c_msg msg[2];
-	u8 reg_buf, data_buf = 0;
-
-	if (!client->adapter)
-		return -ENODEV;
-
-	msg[0].addr = client->addr;
-	msg[0].flags = 0;
-	msg[0].len = 1;
-	msg[0].buf = &reg_buf;
-	msg[1].addr = client->addr;
-	msg[1].flags = I2C_M_RD;
-	msg[1].len = 1;
-	msg[1].buf = &data_buf;
-
-	reg_buf = reg;
-
-	err = i2c_transfer(client->adapter, msg, 2);
-	if (err < 0)
-		return err;
-	return data_buf;
-}
-
-/*
- * Write a value to a register in an TCM825X sensor device.
- * Returns zero if successful, or non-zero otherwise.
- */
-static int tcm825x_write_reg(struct i2c_client *client, u8 reg, u8 val)
-{
-	int err;
-	struct i2c_msg msg[1];
-	unsigned char data[2];
-
-	if (!client->adapter)
-		return -ENODEV;
-
-	msg->addr = client->addr;
-	msg->flags = 0;
-	msg->len = 2;
-	msg->buf = data;
-	data[0] = reg;
-	data[1] = val;
-	err = i2c_transfer(client->adapter, msg, 1);
-	if (err >= 0)
-		return 0;
-	return err;
-}
-
-static int __tcm825x_write_reg_mask(struct i2c_client *client,
-				    u8 reg, u8 val, u8 mask)
-{
-	int rc;
-
-	/* need to do read - modify - write */
-	rc = tcm825x_read_reg(client, reg);
-	if (rc < 0)
-		return rc;
-
-	rc &= (~mask);	/* Clear the masked bits */
-	val &= mask;	/* Enforce mask on value */
-	val |= rc;
-
-	/* write the new value to the register */
-	rc = tcm825x_write_reg(client, reg, val);
-	if (rc)
-		return rc;
-
-	return 0;
-}
-
-#define tcm825x_write_reg_mask(client, regmask, val)			\
-	__tcm825x_write_reg_mask(client, TCM825X_ADDR((regmask)), val,	\
-				 TCM825X_MASK((regmask)))
-
-
-/*
- * Initialize a list of TCM825X registers.
- * The list of registers is terminated by the pair of values
- * { TCM825X_REG_TERM, TCM825X_VAL_TERM }.
- * Returns zero if successful, or non-zero otherwise.
- */
-static int tcm825x_write_default_regs(struct i2c_client *client,
-				      const struct tcm825x_reg *reglist)
-{
-	int err;
-	const struct tcm825x_reg *next = reglist;
-
-	while (!((next->reg == TCM825X_REG_TERM)
-		 && (next->val == TCM825X_VAL_TERM))) {
-		err = tcm825x_write_reg(client, next->reg, next->val);
-		if (err) {
-			dev_err(&client->dev, "register writing failed\n");
-			return err;
-		}
-		next++;
-	}
-
-	return 0;
-}
-
-static struct vcontrol *find_vctrl(int id)
-{
-	int i;
-
-	if (id < V4L2_CID_BASE)
-		return NULL;
-
-	for (i = 0; i < ARRAY_SIZE(video_control); i++)
-		if (video_control[i].qc.id == id)
-			return &video_control[i];
-
-	return NULL;
-}
-
-/*
- * Find the best match for a requested image capture size.  The best match
- * is chosen as the nearest match that has the same number or fewer pixels
- * as the requested size, or the smallest image size if the requested size
- * has fewer pixels than the smallest image.
- */
-static enum image_size tcm825x_find_size(struct v4l2_int_device *s,
-					 unsigned int width,
-					 unsigned int height)
-{
-	enum image_size isize;
-	unsigned long pixels = width * height;
-	struct tcm825x_sensor *sensor = s->priv;
-
-	for (isize = subQCIF; isize < VGA; isize++) {
-		if (tcm825x_sizes[isize + 1].height
-		    * tcm825x_sizes[isize + 1].width > pixels) {
-			dev_dbg(&sensor->i2c_client->dev, "size %d\n", isize);
-
-			return isize;
-		}
-	}
-
-	dev_dbg(&sensor->i2c_client->dev, "format default VGA\n");
-
-	return VGA;
-}
-
-/*
- * Configure the TCM825X for current image size, pixel format, and
- * frame period. fper is the frame period (in seconds) expressed as a
- * fraction. Returns zero if successful, or non-zero otherwise. The
- * actual frame period is returned in fper.
- */
-static int tcm825x_configure(struct v4l2_int_device *s)
-{
-	struct tcm825x_sensor *sensor = s->priv;
-	struct v4l2_pix_format *pix = &sensor->pix;
-	enum image_size isize = tcm825x_find_size(s, pix->width, pix->height);
-	struct v4l2_fract *fper = &sensor->timeperframe;
-	enum pixel_format pfmt;
-	int err;
-	u32 tgt_fps;
-	u8 val;
-
-	/* common register initialization */
-	err = tcm825x_write_default_regs(
-		sensor->i2c_client, sensor->platform_data->default_regs());
-	if (err)
-		return err;
-
-	/* configure image size */
-	val = tcm825x_siz_reg[isize]->val;
-	dev_dbg(&sensor->i2c_client->dev,
-		"configuring image size %d\n", isize);
-	err = tcm825x_write_reg_mask(sensor->i2c_client,
-				     tcm825x_siz_reg[isize]->reg, val);
-	if (err)
-		return err;
-
-	/* configure pixel format */
-	switch (pix->pixelformat) {
-	default:
-	case V4L2_PIX_FMT_RGB565:
-		pfmt = RGB565;
-		break;
-	case V4L2_PIX_FMT_UYVY:
-		pfmt = YUV422;
-		break;
-	}
-
-	dev_dbg(&sensor->i2c_client->dev,
-		"configuring pixel format %d\n", pfmt);
-	val = tcm825x_fmt_reg[pfmt]->val;
-
-	err = tcm825x_write_reg_mask(sensor->i2c_client,
-				     tcm825x_fmt_reg[pfmt]->reg, val);
-	if (err)
-		return err;
-
-	/*
-	 * For frame rate < 15, the FPS reg (addr 0x02, bit 7) must be
-	 * set. Frame rate will be halved from the normal.
-	 */
-	tgt_fps = fper->denominator / fper->numerator;
-	if (tgt_fps <= HIGH_FPS_MODE_LOWER_LIMIT) {
-		val = tcm825x_read_reg(sensor->i2c_client, 0x02);
-		val |= 0x80;
-		tcm825x_write_reg(sensor->i2c_client, 0x02, val);
-	}
-
-	return 0;
-}
-
-static int ioctl_queryctrl(struct v4l2_int_device *s,
-				struct v4l2_queryctrl *qc)
-{
-	struct vcontrol *control;
-
-	control = find_vctrl(qc->id);
-
-	if (control == NULL)
-		return -EINVAL;
-
-	*qc = control->qc;
-
-	return 0;
-}
-
-static int ioctl_g_ctrl(struct v4l2_int_device *s,
-			     struct v4l2_control *vc)
-{
-	struct tcm825x_sensor *sensor = s->priv;
-	struct i2c_client *client = sensor->i2c_client;
-	int val, r;
-	struct vcontrol *lvc;
-
-	/* exposure time is special, spread across 2 registers */
-	if (vc->id == V4L2_CID_EXPOSURE) {
-		int val_lower, val_upper;
-
-		val_upper = tcm825x_read_reg(client,
-					     TCM825X_ADDR(TCM825X_ESRSPD_U));
-		if (val_upper < 0)
-			return val_upper;
-		val_lower = tcm825x_read_reg(client,
-					     TCM825X_ADDR(TCM825X_ESRSPD_L));
-		if (val_lower < 0)
-			return val_lower;
-
-		vc->value = ((val_upper & 0x1f) << 8) | (val_lower);
-		return 0;
-	}
-
-	lvc = find_vctrl(vc->id);
-	if (lvc == NULL)
-		return -EINVAL;
-
-	r = tcm825x_read_reg(client, TCM825X_ADDR(lvc->reg));
-	if (r < 0)
-		return r;
-	val = r & TCM825X_MASK(lvc->reg);
-	val >>= lvc->start_bit;
-
-	if (val < 0)
-		return val;
-
-	if (vc->id == V4L2_CID_HFLIP || vc->id == V4L2_CID_VFLIP)
-		val ^= sensor->platform_data->is_upside_down();
-
-	vc->value = val;
-	return 0;
-}
-
-static int ioctl_s_ctrl(struct v4l2_int_device *s,
-			     struct v4l2_control *vc)
-{
-	struct tcm825x_sensor *sensor = s->priv;
-	struct i2c_client *client = sensor->i2c_client;
-	struct vcontrol *lvc;
-	int val = vc->value;
-
-	/* exposure time is special, spread across 2 registers */
-	if (vc->id == V4L2_CID_EXPOSURE) {
-		int val_lower, val_upper;
-		val_lower = val & TCM825X_MASK(TCM825X_ESRSPD_L);
-		val_upper = (val >> 8) & TCM825X_MASK(TCM825X_ESRSPD_U);
-
-		if (tcm825x_write_reg_mask(client,
-					   TCM825X_ESRSPD_U, val_upper))
-			return -EIO;
-
-		if (tcm825x_write_reg_mask(client,
-					   TCM825X_ESRSPD_L, val_lower))
-			return -EIO;
-
-		return 0;
-	}
-
-	lvc = find_vctrl(vc->id);
-	if (lvc == NULL)
-		return -EINVAL;
-
-	if (vc->id == V4L2_CID_HFLIP || vc->id == V4L2_CID_VFLIP)
-		val ^= sensor->platform_data->is_upside_down();
-
-	val = val << lvc->start_bit;
-	if (tcm825x_write_reg_mask(client, lvc->reg, val))
-		return -EIO;
-
-	return 0;
-}
-
-static int ioctl_enum_fmt_cap(struct v4l2_int_device *s,
-				   struct v4l2_fmtdesc *fmt)
-{
-	int index = fmt->index;
-
-	switch (fmt->type) {
-	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
-		if (index >= TCM825X_NUM_CAPTURE_FORMATS)
-			return -EINVAL;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	fmt->flags = tcm825x_formats[index].flags;
-	strlcpy(fmt->description, tcm825x_formats[index].description,
-		sizeof(fmt->description));
-	fmt->pixelformat = tcm825x_formats[index].pixelformat;
-
-	return 0;
-}
-
-static int ioctl_try_fmt_cap(struct v4l2_int_device *s,
-			     struct v4l2_format *f)
-{
-	struct tcm825x_sensor *sensor = s->priv;
-	enum image_size isize;
-	int ifmt;
-	struct v4l2_pix_format *pix = &f->fmt.pix;
-
-	isize = tcm825x_find_size(s, pix->width, pix->height);
-	dev_dbg(&sensor->i2c_client->dev, "isize = %d num_capture = %lu\n",
-		isize, (unsigned long)TCM825X_NUM_CAPTURE_FORMATS);
-
-	pix->width = tcm825x_sizes[isize].width;
-	pix->height = tcm825x_sizes[isize].height;
-
-	for (ifmt = 0; ifmt < TCM825X_NUM_CAPTURE_FORMATS; ifmt++)
-		if (pix->pixelformat == tcm825x_formats[ifmt].pixelformat)
-			break;
-
-	if (ifmt == TCM825X_NUM_CAPTURE_FORMATS)
-		ifmt = 0;	/* Default = YUV 4:2:2 */
-
-	pix->pixelformat = tcm825x_formats[ifmt].pixelformat;
-	pix->field = V4L2_FIELD_NONE;
-	pix->bytesperline = pix->width * TCM825X_BYTES_PER_PIXEL;
-	pix->sizeimage = pix->bytesperline * pix->height;
-	pix->priv = 0;
-	dev_dbg(&sensor->i2c_client->dev, "format = 0x%08x\n",
-		pix->pixelformat);
-
-	switch (pix->pixelformat) {
-	case V4L2_PIX_FMT_UYVY:
-	default:
-		pix->colorspace = V4L2_COLORSPACE_JPEG;
-		break;
-	case V4L2_PIX_FMT_RGB565:
-		pix->colorspace = V4L2_COLORSPACE_SRGB;
-		break;
-	}
-
-	return 0;
-}
-
-static int ioctl_s_fmt_cap(struct v4l2_int_device *s,
-				struct v4l2_format *f)
-{
-	struct tcm825x_sensor *sensor = s->priv;
-	struct v4l2_pix_format *pix = &f->fmt.pix;
-	int rval;
-
-	rval = ioctl_try_fmt_cap(s, f);
-	if (rval)
-		return rval;
-
-	rval = tcm825x_configure(s);
-
-	sensor->pix = *pix;
-
-	return rval;
-}
-
-static int ioctl_g_fmt_cap(struct v4l2_int_device *s,
-				struct v4l2_format *f)
-{
-	struct tcm825x_sensor *sensor = s->priv;
-
-	f->fmt.pix = sensor->pix;
-
-	return 0;
-}
-
-static int ioctl_g_parm(struct v4l2_int_device *s,
-			     struct v4l2_streamparm *a)
-{
-	struct tcm825x_sensor *sensor = s->priv;
-	struct v4l2_captureparm *cparm = &a->parm.capture;
-
-	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-
-	memset(a, 0, sizeof(*a));
-	a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-
-	cparm->capability = V4L2_CAP_TIMEPERFRAME;
-	cparm->timeperframe = sensor->timeperframe;
-
-	return 0;
-}
-
-static int ioctl_s_parm(struct v4l2_int_device *s,
-			     struct v4l2_streamparm *a)
-{
-	struct tcm825x_sensor *sensor = s->priv;
-	struct v4l2_fract *timeperframe = &a->parm.capture.timeperframe;
-	u32 tgt_fps;	/* target frames per secound */
-	int rval;
-
-	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-
-	if ((timeperframe->numerator == 0)
-	    || (timeperframe->denominator == 0)) {
-		timeperframe->denominator = DEFAULT_FPS;
-		timeperframe->numerator = 1;
-	}
-
-	tgt_fps = timeperframe->denominator / timeperframe->numerator;
-
-	if (tgt_fps > MAX_FPS) {
-		timeperframe->denominator = MAX_FPS;
-		timeperframe->numerator = 1;
-	} else if (tgt_fps < MIN_FPS) {
-		timeperframe->denominator = MIN_FPS;
-		timeperframe->numerator = 1;
-	}
-
-	sensor->timeperframe = *timeperframe;
-
-	rval = tcm825x_configure(s);
-
-	return rval;
-}
-
-static int ioctl_s_power(struct v4l2_int_device *s, int on)
-{
-	struct tcm825x_sensor *sensor = s->priv;
-
-	return sensor->platform_data->power_set(on);
-}
-
-/*
- * Given the image capture format in pix, the nominal frame period in
- * timeperframe, calculate the required xclk frequency.
- *
- * TCM825X input frequency characteristics are:
- *     Minimum 11.9 MHz, Typical 24.57 MHz and maximum 25/27 MHz
- */
-
-static int ioctl_g_ifparm(struct v4l2_int_device *s, struct v4l2_ifparm *p)
-{
-	struct tcm825x_sensor *sensor = s->priv;
-	struct v4l2_fract *timeperframe = &sensor->timeperframe;
-	u32 tgt_xclk;	/* target xclk */
-	u32 tgt_fps;	/* target frames per secound */
-	int rval;
-
-	rval = sensor->platform_data->ifparm(p);
-	if (rval)
-		return rval;
-
-	tgt_fps = timeperframe->denominator / timeperframe->numerator;
-
-	tgt_xclk = (tgt_fps <= HIGH_FPS_MODE_LOWER_LIMIT) ?
-		(2457 * tgt_fps) / MAX_HALF_FPS :
-		(2457 * tgt_fps) / MAX_FPS;
-	tgt_xclk *= 10000;
-
-	tgt_xclk = min(tgt_xclk, (u32)TCM825X_XCLK_MAX);
-	tgt_xclk = max(tgt_xclk, (u32)TCM825X_XCLK_MIN);
-
-	p->u.bt656.clock_curr = tgt_xclk;
-
-	return 0;
-}
-
-static int ioctl_g_needs_reset(struct v4l2_int_device *s, void *buf)
-{
-	struct tcm825x_sensor *sensor = s->priv;
-
-	return sensor->platform_data->needs_reset(s, buf, &sensor->pix);
-}
-
-static int ioctl_reset(struct v4l2_int_device *s)
-{
-	return -EBUSY;
-}
-
-static int ioctl_init(struct v4l2_int_device *s)
-{
-	return tcm825x_configure(s);
-}
-
-static int ioctl_dev_exit(struct v4l2_int_device *s)
-{
-	return 0;
-}
-
-static int ioctl_dev_init(struct v4l2_int_device *s)
-{
-	struct tcm825x_sensor *sensor = s->priv;
-	int r;
-
-	r = tcm825x_read_reg(sensor->i2c_client, 0x01);
-	if (r < 0)
-		return r;
-	if (r == 0) {
-		dev_err(&sensor->i2c_client->dev, "device not detected\n");
-		return -EIO;
-	}
-	return 0;
-}
-
-static struct v4l2_int_ioctl_desc tcm825x_ioctl_desc[] = {
-	{ vidioc_int_dev_init_num,
-	  (v4l2_int_ioctl_func *)ioctl_dev_init },
-	{ vidioc_int_dev_exit_num,
-	  (v4l2_int_ioctl_func *)ioctl_dev_exit },
-	{ vidioc_int_s_power_num,
-	  (v4l2_int_ioctl_func *)ioctl_s_power },
-	{ vidioc_int_g_ifparm_num,
-	  (v4l2_int_ioctl_func *)ioctl_g_ifparm },
-	{ vidioc_int_g_needs_reset_num,
-	  (v4l2_int_ioctl_func *)ioctl_g_needs_reset },
-	{ vidioc_int_reset_num,
-	  (v4l2_int_ioctl_func *)ioctl_reset },
-	{ vidioc_int_init_num,
-	  (v4l2_int_ioctl_func *)ioctl_init },
-	{ vidioc_int_enum_fmt_cap_num,
-	  (v4l2_int_ioctl_func *)ioctl_enum_fmt_cap },
-	{ vidioc_int_try_fmt_cap_num,
-	  (v4l2_int_ioctl_func *)ioctl_try_fmt_cap },
-	{ vidioc_int_g_fmt_cap_num,
-	  (v4l2_int_ioctl_func *)ioctl_g_fmt_cap },
-	{ vidioc_int_s_fmt_cap_num,
-	  (v4l2_int_ioctl_func *)ioctl_s_fmt_cap },
-	{ vidioc_int_g_parm_num,
-	  (v4l2_int_ioctl_func *)ioctl_g_parm },
-	{ vidioc_int_s_parm_num,
-	  (v4l2_int_ioctl_func *)ioctl_s_parm },
-	{ vidioc_int_queryctrl_num,
-	  (v4l2_int_ioctl_func *)ioctl_queryctrl },
-	{ vidioc_int_g_ctrl_num,
-	  (v4l2_int_ioctl_func *)ioctl_g_ctrl },
-	{ vidioc_int_s_ctrl_num,
-	  (v4l2_int_ioctl_func *)ioctl_s_ctrl },
-};
-
-static struct v4l2_int_slave tcm825x_slave = {
-	.ioctls = tcm825x_ioctl_desc,
-	.num_ioctls = ARRAY_SIZE(tcm825x_ioctl_desc),
-};
-
-static struct tcm825x_sensor tcm825x;
-
-static struct v4l2_int_device tcm825x_int_device = {
-	.module = THIS_MODULE,
-	.name = TCM825X_NAME,
-	.priv = &tcm825x,
-	.type = v4l2_int_type_slave,
-	.u = {
-		.slave = &tcm825x_slave,
-	},
-};
-
-static int tcm825x_probe(struct i2c_client *client,
-			 const struct i2c_device_id *did)
-{
-	struct tcm825x_sensor *sensor = &tcm825x;
-
-	if (i2c_get_clientdata(client))
-		return -EBUSY;
-
-	sensor->platform_data = client->dev.platform_data;
-
-	if (sensor->platform_data == NULL
-	    || !sensor->platform_data->is_okay())
-		return -ENODEV;
-
-	sensor->v4l2_int_device = &tcm825x_int_device;
-
-	sensor->i2c_client = client;
-	i2c_set_clientdata(client, sensor);
-
-	/* Make the default capture format QVGA RGB565 */
-	sensor->pix.width = tcm825x_sizes[QVGA].width;
-	sensor->pix.height = tcm825x_sizes[QVGA].height;
-	sensor->pix.pixelformat = V4L2_PIX_FMT_RGB565;
-
-	return v4l2_int_device_register(sensor->v4l2_int_device);
-}
-
-static int tcm825x_remove(struct i2c_client *client)
-{
-	struct tcm825x_sensor *sensor = i2c_get_clientdata(client);
-
-	if (!client->adapter)
-		return -ENODEV;	/* our client isn't attached */
-
-	v4l2_int_device_unregister(sensor->v4l2_int_device);
-
-	return 0;
-}
-
-static const struct i2c_device_id tcm825x_id[] = {
-	{ "tcm825x", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, tcm825x_id);
-
-static struct i2c_driver tcm825x_i2c_driver = {
-	.driver	= {
-		.name = TCM825X_NAME,
-	},
-	.probe	= tcm825x_probe,
-	.remove	= tcm825x_remove,
-	.id_table = tcm825x_id,
-};
-
-static struct tcm825x_sensor tcm825x = {
-	.timeperframe = {
-		.numerator   = 1,
-		.denominator = DEFAULT_FPS,
-	},
-};
-
-static int __init tcm825x_init(void)
-{
-	int rval;
-
-	rval = i2c_add_driver(&tcm825x_i2c_driver);
-	if (rval)
-		printk(KERN_INFO "%s: failed registering " TCM825X_NAME "\n",
-		       __func__);
-
-	return rval;
-}
-
-static void __exit tcm825x_exit(void)
-{
-	i2c_del_driver(&tcm825x_i2c_driver);
-}
-
-/*
- * FIXME: Menelaus isn't ready (?) at module_init stage, so use
- * late_initcall for now.
- */
-late_initcall(tcm825x_init);
-module_exit(tcm825x_exit);
-
-MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>");
-MODULE_DESCRIPTION("TCM825x camera sensor driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/tcm825x.h b/drivers/media/video/tcm825x.h
deleted file mode 100644
index 5b7e696..0000000
--- a/drivers/media/video/tcm825x.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * drivers/media/video/tcm825x.h
- *
- * Register definitions for the TCM825X CameraChip.
- *
- * Author: David Cohen (david.cohen@indt.org.br)
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
- * This file was based on ov9640.h from MontaVista
- */
-
-#ifndef TCM825X_H
-#define TCM825X_H
-
-#include <linux/videodev2.h>
-
-#include <media/v4l2-int-device.h>
-
-#define TCM825X_NAME "tcm825x"
-
-#define TCM825X_MASK(x)  x & 0x00ff
-#define TCM825X_ADDR(x) (x & 0xff00) >> 8
-
-/* The TCM825X I2C sensor chip has a fixed slave address of 0x3d. */
-#define TCM825X_I2C_ADDR	0x3d
-
-/*
- * define register offsets for the TCM825X sensor chip
- * OFFSET(8 bits) + MASK(8 bits)
- * MASK bit 4 and 3 are used when the register uses more than one address
- */
-#define TCM825X_FPS		0x0280
-#define TCM825X_ACF		0x0240
-#define TCM825X_DOUTBUF		0x020C
-#define TCM825X_DCLKP		0x0202
-#define TCM825X_ACFDET		0x0201
-#define TCM825X_DOUTSW		0x0380
-#define TCM825X_DATAHZ		0x0340
-#define TCM825X_PICSIZ		0x033c
-#define TCM825X_PICFMT		0x0302
-#define TCM825X_V_INV		0x0480
-#define TCM825X_H_INV		0x0440
-#define TCM825X_ESRLSW		0x0430
-#define TCM825X_V_LENGTH	0x040F
-#define TCM825X_ALCSW		0x0580
-#define TCM825X_ESRLIM		0x0560
-#define TCM825X_ESRSPD_U        0x051F
-#define TCM825X_ESRSPD_L        0x06FF
-#define TCM825X_AG		0x07FF
-#define TCM825X_ESRSPD2         0x06FF
-#define TCM825X_ALCMODE         0x0830
-#define TCM825X_ALCH            0x080F
-#define TCM825X_ALCL            0x09FF
-#define TCM825X_AWBSW           0x0A80
-#define TCM825X_MRG             0x0BFF
-#define TCM825X_MBG             0x0CFF
-#define TCM825X_GAMSW           0x0D80
-#define TCM825X_HDTG            0x0EFF
-#define TCM825X_VDTG            0x0FFF
-#define TCM825X_HDTCORE         0x10F0
-#define TCM825X_VDTCORE         0x100F
-#define TCM825X_CONT            0x11FF
-#define TCM825X_BRIGHT          0x12FF
-#define TCM825X_VHUE            0x137F
-#define TCM825X_UHUE            0x147F
-#define TCM825X_VGAIN           0x153F
-#define TCM825X_UGAIN           0x163F
-#define TCM825X_UVCORE          0x170F
-#define TCM825X_SATU            0x187F
-#define TCM825X_MHMODE          0x1980
-#define TCM825X_MHLPFSEL        0x1940
-#define TCM825X_YMODE           0x1930
-#define TCM825X_MIXHG           0x1907
-#define TCM825X_LENS            0x1A3F
-#define TCM825X_AGLIM           0x1BE0
-#define TCM825X_LENSRPOL        0x1B10
-#define TCM825X_LENSRGAIN       0x1B0F
-#define TCM825X_ES100S          0x1CFF
-#define TCM825X_ES120S          0x1DFF
-#define TCM825X_DMASK           0x1EC0
-#define TCM825X_CODESW          0x1E20
-#define TCM825X_CODESEL         0x1E10
-#define TCM825X_TESPIC          0x1E04
-#define TCM825X_PICSEL          0x1E03
-#define TCM825X_HNUM            0x20FF
-#define TCM825X_VOUTPH          0x287F
-#define TCM825X_ESROUT          0x327F
-#define TCM825X_ESROUT2         0x33FF
-#define TCM825X_AGOUT           0x34FF
-#define TCM825X_DGOUT           0x353F
-#define TCM825X_AGSLOW1         0x39C0
-#define TCM825X_FLLSMODE        0x3930
-#define TCM825X_FLLSLIM         0x390F
-#define TCM825X_DETSEL          0x3AF0
-#define TCM825X_ACDETNC         0x3A0F
-#define TCM825X_AGSLOW2         0x3BC0
-#define TCM825X_DG              0x3B3F
-#define TCM825X_REJHLEV         0x3CFF
-#define TCM825X_ALCLOCK         0x3D80
-#define TCM825X_FPSLNKSW        0x3D40
-#define TCM825X_ALCSPD          0x3D30
-#define TCM825X_REJH            0x3D03
-#define TCM825X_SHESRSW         0x3E80
-#define TCM825X_ESLIMSEL        0x3E40
-#define TCM825X_SHESRSPD        0x3E30
-#define TCM825X_ELSTEP          0x3E0C
-#define TCM825X_ELSTART         0x3E03
-#define TCM825X_AGMIN           0x3FFF
-#define TCM825X_PREGRG          0x423F
-#define TCM825X_PREGBG          0x433F
-#define TCM825X_PRERG           0x443F
-#define TCM825X_PREBG           0x453F
-#define TCM825X_MSKBR           0x477F
-#define TCM825X_MSKGR           0x487F
-#define TCM825X_MSKRB           0x497F
-#define TCM825X_MSKGB           0x4A7F
-#define TCM825X_MSKRG           0x4B7F
-#define TCM825X_MSKBG           0x4C7F
-#define TCM825X_HDTCSW          0x4D80
-#define TCM825X_VDTCSW          0x4D40
-#define TCM825X_DTCYL           0x4D3F
-#define TCM825X_HDTPSW          0x4E80
-#define TCM825X_VDTPSW          0x4E40
-#define TCM825X_DTCGAIN         0x4E3F
-#define TCM825X_DTLLIMSW        0x4F10
-#define TCM825X_DTLYLIM         0x4F0F
-#define TCM825X_YLCUTLMSK       0x5080
-#define TCM825X_YLCUTL          0x503F
-#define TCM825X_YLCUTHMSK       0x5180
-#define TCM825X_YLCUTH          0x513F
-#define TCM825X_UVSKNC          0x527F
-#define TCM825X_UVLJ            0x537F
-#define TCM825X_WBGMIN          0x54FF
-#define TCM825X_WBGMAX          0x55FF
-#define TCM825X_WBSPDUP         0x5603
-#define TCM825X_ALLAREA         0x5820
-#define TCM825X_WBLOCK          0x5810
-#define TCM825X_WB2SP           0x580F
-#define TCM825X_KIZUSW          0x5920
-#define TCM825X_PBRSW           0x5910
-#define TCM825X_ABCSW           0x5903
-#define TCM825X_PBDLV           0x5AFF
-#define TCM825X_PBC1LV          0x5BFF
-
-#define TCM825X_NUM_REGS	(TCM825X_ADDR(TCM825X_PBC1LV) + 1)
-
-#define TCM825X_BYTES_PER_PIXEL 2
-
-#define TCM825X_REG_TERM 0xff		/* terminating list entry for reg */
-#define TCM825X_VAL_TERM 0xff		/* terminating list entry for val */
-
-/* define a structure for tcm825x register initialization values */
-struct tcm825x_reg {
-	u8 val;
-	u16 reg;
-};
-
-enum image_size { subQCIF = 0, QQVGA, QCIF, QVGA, CIF, VGA };
-enum pixel_format { YUV422 = 0, RGB565 };
-#define NUM_IMAGE_SIZES 6
-#define NUM_PIXEL_FORMATS 2
-
-#define TCM825X_XCLK_MIN	11900000
-#define TCM825X_XCLK_MAX	25000000
-
-struct capture_size {
-	unsigned long width;
-	unsigned long height;
-};
-
-struct tcm825x_platform_data {
-	/* Is the sensor usable? Doesn't yet mean it's there, but you
-	 * can try! */
-	int (*is_okay)(void);
-	/* Set power state, zero is off, non-zero is on. */
-	int (*power_set)(int power);
-	/* Default registers written after power-on or reset. */
-	const struct tcm825x_reg *(*default_regs)(void);
-	int (*needs_reset)(struct v4l2_int_device *s, void *buf,
-			   struct v4l2_pix_format *fmt);
-	int (*ifparm)(struct v4l2_ifparm *p);
-	int (*is_upside_down)(void);
-};
-
-/* Array of image sizes supported by TCM825X.  These must be ordered from
- * smallest image size to largest.
- */
-static const struct capture_size tcm825x_sizes[] = {
-	{ 128,  96 }, /* subQCIF */
-	{ 160, 120 }, /* QQVGA */
-	{ 176, 144 }, /* QCIF */
-	{ 320, 240 }, /* QVGA */
-	{ 352, 288 }, /* CIF */
-	{ 640, 480 }, /* VGA */
-};
-
-#endif /* ifndef TCM825X_H */
diff --git a/drivers/media/video/tda7432.c b/drivers/media/video/tda7432.c
deleted file mode 100644
index f7707e6..0000000
--- a/drivers/media/video/tda7432.c
+++ /dev/null
@@ -1,485 +0,0 @@
-/*
- * For the STS-Thompson TDA7432 audio processor chip
- *
- * Handles audio functions: volume, balance, tone, loudness
- * This driver will not complain if used with any
- * other i2c device with the same address.
- *
- * Muting and tone control by Jonathan Isom <jisom@ematic.com>
- *
- * Copyright (c) 2000 Eric Sandeen <eric_sandeen@bigfoot.com>
- * Copyright (c) 2006 Mauro Carvalho Chehab <mchehab@infradead.org>
- * This code is placed under the terms of the GNU General Public License
- * Based on tda9855.c by Steve VanDeBogart (vandebo@uclink.berkeley.edu)
- * Which was based on tda8425.c by Greg Alexander (c) 1998
- *
- * OPTIONS:
- * debug    - set to 1 if you'd like to see debug messages
- *            set to 2 if you'd like to be inundated with debug messages
- *
- * loudness - set between 0 and 15 for varying degrees of loudness effect
- *
- * maxvol   - set maximium volume to +20db (1), default is 0db(0)
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/videodev2.h>
-#include <linux/i2c.h>
-
-#include <media/v4l2-device.h>
-#include <media/v4l2-ioctl.h>
-#include <media/i2c-addr.h>
-
-#ifndef VIDEO_AUDIO_BALANCE
-# define VIDEO_AUDIO_BALANCE 32
-#endif
-
-MODULE_AUTHOR("Eric Sandeen <eric_sandeen@bigfoot.com>");
-MODULE_DESCRIPTION("bttv driver for the tda7432 audio processor chip");
-MODULE_LICENSE("GPL");
-
-static int maxvol;
-static int loudness; /* disable loudness by default */
-static int debug;	 /* insmod parameter */
-module_param(debug, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Set debugging level from 0 to 3. Default is off(0).");
-module_param(loudness, int, S_IRUGO);
-MODULE_PARM_DESC(loudness, "Turn loudness on(1) else off(0). Default is off(0).");
-module_param(maxvol, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(maxvol, "Set maximium volume to +20dB(0) else +0dB(1). Default is +20dB(0).");
-
-
-/* Structure of address and subaddresses for the tda7432 */
-
-struct tda7432 {
-	struct v4l2_subdev sd;
-	int addr;
-	int input;
-	int volume;
-	int muted;
-	int bass, treble;
-	int lf, lr, rf, rr;
-	int loud;
-};
-
-static inline struct tda7432 *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct tda7432, sd);
-}
-
-/* The TDA7432 is made by STS-Thompson
- * http://www.st.com
- * http://us.st.com/stonline/books/pdf/docs/4056.pdf
- *
- * TDA7432: I2C-bus controlled basic audio processor
- *
- * The TDA7432 controls basic audio functions like volume, balance,
- * and tone control (including loudness).  It also has four channel
- * output (for front and rear).  Since most vidcap cards probably
- * don't have 4 channel output, this driver will set front & rear
- * together (no independent control).
- */
-
-		/* Subaddresses for TDA7432 */
-
-#define TDA7432_IN	0x00 /* Input select                 */
-#define TDA7432_VL	0x01 /* Volume                       */
-#define TDA7432_TN	0x02 /* Bass, Treble (Tone)          */
-#define TDA7432_LF	0x03 /* Attenuation LF (Left Front)  */
-#define TDA7432_LR	0x04 /* Attenuation LR (Left Rear)   */
-#define TDA7432_RF	0x05 /* Attenuation RF (Right Front) */
-#define TDA7432_RR	0x06 /* Attenuation RR (Right Rear)  */
-#define TDA7432_LD	0x07 /* Loudness                     */
-
-
-		/* Masks for bits in TDA7432 subaddresses */
-
-/* Many of these not used - just for documentation */
-
-/* Subaddress 0x00 - Input selection and bass control */
-
-/* Bits 0,1,2 control input:
- * 0x00 - Stereo input
- * 0x02 - Mono input
- * 0x03 - Mute  (Using Attenuators Plays better with modules)
- * Mono probably isn't used - I'm guessing only the stereo
- * input is connected on most cards, so we'll set it to stereo.
- *
- * Bit 3 controls bass cut: 0/1 is non-symmetric/symmetric bass cut
- * Bit 4 controls bass range: 0/1 is extended/standard bass range
- *
- * Highest 3 bits not used
- */
-
-#define TDA7432_STEREO_IN	0
-#define TDA7432_MONO_IN		2	/* Probably won't be used */
-#define TDA7432_BASS_SYM	1 << 3
-#define TDA7432_BASS_NORM	1 << 4
-
-/* Subaddress 0x01 - Volume */
-
-/* Lower 7 bits control volume from -79dB to +32dB in 1dB steps
- * Recommended maximum is +20 dB
- *
- * +32dB: 0x00
- * +20dB: 0x0c
- *   0dB: 0x20
- * -79dB: 0x6f
- *
- * MSB (bit 7) controls loudness: 1/0 is loudness on/off
- */
-
-#define	TDA7432_VOL_0DB		0x20
-#define TDA7432_LD_ON		1 << 7
-
-
-/* Subaddress 0x02 - Tone control */
-
-/* Bits 0,1,2 control absolute treble gain from 0dB to 14dB
- * 0x0 is 14dB, 0x7 is 0dB
- *
- * Bit 3 controls treble attenuation/gain (sign)
- * 1 = gain (+)
- * 0 = attenuation (-)
- *
- * Bits 4,5,6 control absolute bass gain from 0dB to 14dB
- * (This is only true for normal base range, set in 0x00)
- * 0x0 << 4 is 14dB, 0x7 is 0dB
- *
- * Bit 7 controls bass attenuation/gain (sign)
- * 1 << 7 = gain (+)
- * 0 << 7 = attenuation (-)
- *
- * Example:
- * 1 1 0 1 0 1 0 1 is +4dB bass, -4dB treble
- */
-
-#define TDA7432_TREBLE_0DB		0xf
-#define TDA7432_TREBLE			7
-#define TDA7432_TREBLE_GAIN		1 << 3
-#define TDA7432_BASS_0DB		0xf
-#define TDA7432_BASS			7 << 4
-#define TDA7432_BASS_GAIN		1 << 7
-
-
-/* Subaddress 0x03 - Left  Front attenuation */
-/* Subaddress 0x04 - Left  Rear  attenuation */
-/* Subaddress 0x05 - Right Front attenuation */
-/* Subaddress 0x06 - Right Rear  attenuation */
-
-/* Bits 0,1,2,3,4 control attenuation from 0dB to -37.5dB
- * in 1.5dB steps.
- *
- * 0x00 is     0dB
- * 0x1f is -37.5dB
- *
- * Bit 5 mutes that channel when set (1 = mute, 0 = unmute)
- * We'll use the mute on the input, though (above)
- * Bits 6,7 unused
- */
-
-#define TDA7432_ATTEN_0DB	0x00
-#define TDA7432_MUTE        0x1 << 5
-
-
-/* Subaddress 0x07 - Loudness Control */
-
-/* Bits 0,1,2,3 control loudness from 0dB to -15dB in 1dB steps
- * when bit 4 is NOT set
- *
- * 0x0 is   0dB
- * 0xf is -15dB
- *
- * If bit 4 is set, then there is a flat attenuation according to
- * the lower 4 bits, as above.
- *
- * Bits 5,6,7 unused
- */
-
-
-
-/* Begin code */
-
-static int tda7432_write(struct v4l2_subdev *sd, int subaddr, int val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	unsigned char buffer[2];
-
-	v4l2_dbg(2, debug, sd, "In tda7432_write\n");
-	v4l2_dbg(1, debug, sd, "Writing %d 0x%x\n", subaddr, val);
-	buffer[0] = subaddr;
-	buffer[1] = val;
-	if (2 != i2c_master_send(client, buffer, 2)) {
-		v4l2_err(sd, "I/O error, trying (write %d 0x%x)\n",
-		       subaddr, val);
-		return -1;
-	}
-	return 0;
-}
-
-static int tda7432_set(struct v4l2_subdev *sd)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct tda7432 *t = to_state(sd);
-	unsigned char buf[16];
-
-	v4l2_dbg(1, debug, sd,
-		"tda7432: 7432_set(0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x)\n",
-		t->input, t->volume, t->bass, t->treble, t->lf, t->lr,
-		t->rf, t->rr, t->loud);
-	buf[0]  = TDA7432_IN;
-	buf[1]  = t->input;
-	buf[2]  = t->volume;
-	buf[3]  = t->bass;
-	buf[4]	= t->treble;
-	buf[5]  = t->lf;
-	buf[6]  = t->lr;
-	buf[7]  = t->rf;
-	buf[8]  = t->rr;
-	buf[9]  = t->loud;
-	if (10 != i2c_master_send(client, buf, 10)) {
-		v4l2_err(sd, "I/O error, trying tda7432_set\n");
-		return -1;
-	}
-
-	return 0;
-}
-
-static void do_tda7432_init(struct v4l2_subdev *sd)
-{
-	struct tda7432 *t = to_state(sd);
-
-	v4l2_dbg(2, debug, sd, "In tda7432_init\n");
-
-	t->input  = TDA7432_STEREO_IN |  /* Main (stereo) input   */
-		    TDA7432_BASS_SYM  |  /* Symmetric bass cut    */
-		    TDA7432_BASS_NORM;   /* Normal bass range     */
-	t->volume =  0x3b ;				 /* -27dB Volume            */
-	if (loudness)			 /* Turn loudness on?     */
-		t->volume |= TDA7432_LD_ON;
-	t->muted    = 1;
-	t->treble   = TDA7432_TREBLE_0DB; /* 0dB Treble            */
-	t->bass		= TDA7432_BASS_0DB; 	 /* 0dB Bass              */
-	t->lf     = TDA7432_ATTEN_0DB;	 /* 0dB attenuation       */
-	t->lr     = TDA7432_ATTEN_0DB;	 /* 0dB attenuation       */
-	t->rf     = TDA7432_ATTEN_0DB;	 /* 0dB attenuation       */
-	t->rr     = TDA7432_ATTEN_0DB;	 /* 0dB attenuation       */
-	t->loud   = loudness;		 /* insmod parameter      */
-
-	tda7432_set(sd);
-}
-
-static int tda7432_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct tda7432 *t = to_state(sd);
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		ctrl->value=t->muted;
-		return 0;
-	case V4L2_CID_AUDIO_VOLUME:
-		if (!maxvol){  /* max +20db */
-			ctrl->value = ( 0x6f - (t->volume & 0x7F) ) * 630;
-		} else {       /* max 0db   */
-			ctrl->value = ( 0x6f - (t->volume & 0x7F) ) * 829;
-		}
-		return 0;
-	case V4L2_CID_AUDIO_BALANCE:
-	{
-		if ( (t->lf) < (t->rf) )
-			/* right is attenuated, balance shifted left */
-			ctrl->value = (32768 - 1057*(t->rf));
-		else
-			/* left is attenuated, balance shifted right */
-			ctrl->value = (32768 + 1057*(t->lf));
-		return 0;
-	}
-	case V4L2_CID_AUDIO_BASS:
-	{
-		/* Bass/treble 4 bits each */
-		int bass=t->bass;
-		if(bass >= 0x8)
-			bass = ~(bass - 0x8) & 0xf;
-		ctrl->value = (bass << 12)+(bass << 8)+(bass << 4)+(bass);
-		return 0;
-	}
-	case V4L2_CID_AUDIO_TREBLE:
-	{
-		int treble=t->treble;
-		if(treble >= 0x8)
-			treble = ~(treble - 0x8) & 0xf;
-		ctrl->value = (treble << 12)+(treble << 8)+(treble << 4)+(treble);
-		return 0;
-	}
-	}
-	return -EINVAL;
-}
-
-static int tda7432_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct tda7432 *t = to_state(sd);
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		t->muted=ctrl->value;
-		break;
-	case V4L2_CID_AUDIO_VOLUME:
-		if(!maxvol){ /* max +20db */
-			t->volume = 0x6f - ((ctrl->value)/630);
-		} else {    /* max 0db   */
-			t->volume = 0x6f - ((ctrl->value)/829);
-		}
-		if (loudness)		/* Turn on the loudness bit */
-			t->volume |= TDA7432_LD_ON;
-
-		tda7432_write(sd, TDA7432_VL, t->volume);
-		return 0;
-	case V4L2_CID_AUDIO_BALANCE:
-		if (ctrl->value < 32768) {
-			/* shifted to left, attenuate right */
-			t->rr = (32768 - ctrl->value)/1057;
-			t->rf = t->rr;
-			t->lr = TDA7432_ATTEN_0DB;
-			t->lf = TDA7432_ATTEN_0DB;
-		} else if(ctrl->value > 32769) {
-			/* shifted to right, attenuate left */
-			t->lf = (ctrl->value - 32768)/1057;
-			t->lr = t->lf;
-			t->rr = TDA7432_ATTEN_0DB;
-			t->rf = TDA7432_ATTEN_0DB;
-		} else {
-			/* centered */
-			t->rr = TDA7432_ATTEN_0DB;
-			t->rf = TDA7432_ATTEN_0DB;
-			t->lf = TDA7432_ATTEN_0DB;
-			t->lr = TDA7432_ATTEN_0DB;
-		}
-		break;
-	case V4L2_CID_AUDIO_BASS:
-		t->bass = ctrl->value >> 12;
-		if(t->bass>= 0x8)
-				t->bass = (~t->bass & 0xf) + 0x8 ;
-
-		tda7432_write(sd, TDA7432_TN, 0x10 | (t->bass << 4) | t->treble);
-		return 0;
-	case V4L2_CID_AUDIO_TREBLE:
-		t->treble= ctrl->value >> 12;
-		if(t->treble>= 0x8)
-				t->treble = (~t->treble & 0xf) + 0x8 ;
-
-		tda7432_write(sd, TDA7432_TN, 0x10 | (t->bass << 4) | t->treble);
-		return 0;
-	default:
-		return -EINVAL;
-	}
-
-	/* Used for both mute and balance changes */
-	if (t->muted)
-	{
-		/* Mute & update balance*/
-		tda7432_write(sd, TDA7432_LF, t->lf | TDA7432_MUTE);
-		tda7432_write(sd, TDA7432_LR, t->lr | TDA7432_MUTE);
-		tda7432_write(sd, TDA7432_RF, t->rf | TDA7432_MUTE);
-		tda7432_write(sd, TDA7432_RR, t->rr | TDA7432_MUTE);
-	} else {
-		tda7432_write(sd, TDA7432_LF, t->lf);
-		tda7432_write(sd, TDA7432_LR, t->lr);
-		tda7432_write(sd, TDA7432_RF, t->rf);
-		tda7432_write(sd, TDA7432_RR, t->rr);
-	}
-	return 0;
-}
-
-static int tda7432_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
-	switch (qc->id) {
-	case V4L2_CID_AUDIO_VOLUME:
-		return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 58880);
-	case V4L2_CID_AUDIO_MUTE:
-		return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
-	case V4L2_CID_AUDIO_BALANCE:
-	case V4L2_CID_AUDIO_BASS:
-	case V4L2_CID_AUDIO_TREBLE:
-		return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 32768);
-	}
-	return -EINVAL;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops tda7432_core_ops = {
-	.queryctrl = tda7432_queryctrl,
-	.g_ctrl = tda7432_g_ctrl,
-	.s_ctrl = tda7432_s_ctrl,
-};
-
-static const struct v4l2_subdev_ops tda7432_ops = {
-	.core = &tda7432_core_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-/* *********************** *
- * i2c interface functions *
- * *********************** */
-
-static int tda7432_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	struct tda7432 *t;
-	struct v4l2_subdev *sd;
-
-	v4l_info(client, "chip found @ 0x%02x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	t = kzalloc(sizeof(*t), GFP_KERNEL);
-	if (!t)
-		return -ENOMEM;
-	sd = &t->sd;
-	v4l2_i2c_subdev_init(sd, client, &tda7432_ops);
-	if (loudness < 0 || loudness > 15) {
-		v4l2_warn(sd, "loudness parameter must be between 0 and 15\n");
-		if (loudness < 0)
-			loudness = 0;
-		if (loudness > 15)
-			loudness = 15;
-	}
-
-	do_tda7432_init(sd);
-	return 0;
-}
-
-static int tda7432_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-
-	do_tda7432_init(sd);
-	v4l2_device_unregister_subdev(sd);
-	kfree(to_state(sd));
-	return 0;
-}
-
-static const struct i2c_device_id tda7432_id[] = {
-	{ "tda7432", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, tda7432_id);
-
-static struct i2c_driver tda7432_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "tda7432",
-	},
-	.probe		= tda7432_probe,
-	.remove		= tda7432_remove,
-	.id_table	= tda7432_id,
-};
-
-module_i2c_driver(tda7432_driver);
diff --git a/drivers/media/video/tda9840.c b/drivers/media/video/tda9840.c
deleted file mode 100644
index 3d7ddd9..0000000
--- a/drivers/media/video/tda9840.c
+++ /dev/null
@@ -1,224 +0,0 @@
- /*
-    tda9840 - i2c-driver for the tda9840 by SGS Thomson
-
-    Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de>
-    Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl>
-
-    The tda9840 is a stereo/dual sound processor with digital
-    identification. It can be found at address 0x84 on the i2c-bus.
-
-    For detailed informations download the specifications directly
-    from SGS Thomson at http://www.st.com
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-  */
-
-
-#include <linux/module.h>
-#include <linux/ioctl.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-
-MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
-MODULE_DESCRIPTION("tda9840 driver");
-MODULE_LICENSE("GPL");
-
-static int debug;
-module_param(debug, int, 0644);
-
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
-
-#define	SWITCH		0x00
-#define	LEVEL_ADJUST	0x02
-#define	STEREO_ADJUST	0x03
-#define	TEST		0x04
-
-#define TDA9840_SET_MUTE                0x00
-#define TDA9840_SET_MONO                0x10
-#define TDA9840_SET_STEREO              0x2a
-#define TDA9840_SET_LANG1               0x12
-#define TDA9840_SET_LANG2               0x1e
-#define TDA9840_SET_BOTH                0x1a
-#define TDA9840_SET_BOTH_R              0x16
-#define TDA9840_SET_EXTERNAL            0x7a
-
-
-static void tda9840_write(struct v4l2_subdev *sd, u8 reg, u8 val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (i2c_smbus_write_byte_data(client, reg, val))
-		v4l2_dbg(1, debug, sd, "error writing %02x to %02x\n",
-				val, reg);
-}
-
-static int tda9840_status(struct v4l2_subdev *sd)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u8 byte;
-
-	if (1 != i2c_master_recv(client, &byte, 1)) {
-		v4l2_dbg(1, debug, sd,
-			"i2c_master_recv() failed\n");
-		return -EIO;
-	}
-
-	if (byte & 0x80) {
-		v4l2_dbg(1, debug, sd,
-			"TDA9840_DETECT: register contents invalid\n");
-		return -EINVAL;
-	}
-
-	v4l2_dbg(1, debug, sd, "TDA9840_DETECT: byte: 0x%02x\n", byte);
-	return byte & 0x60;
-}
-
-static int tda9840_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *t)
-{
-	int stat = tda9840_status(sd);
-	int byte;
-
-	if (t->index)
-		return -EINVAL;
-
-	stat = stat < 0 ? 0 : stat;
-	if (stat == 0 || stat == 0x60) /* mono input */
-		byte = TDA9840_SET_MONO;
-	else if (stat == 0x40) /* stereo input */
-		byte = (t->audmode == V4L2_TUNER_MODE_MONO) ?
-			TDA9840_SET_MONO : TDA9840_SET_STEREO;
-	else { /* bilingual */
-		switch (t->audmode) {
-		case V4L2_TUNER_MODE_LANG1_LANG2:
-			byte = TDA9840_SET_BOTH;
-			break;
-		case V4L2_TUNER_MODE_LANG2:
-			byte = TDA9840_SET_LANG2;
-			break;
-		default:
-			byte = TDA9840_SET_LANG1;
-			break;
-		}
-	}
-	v4l2_dbg(1, debug, sd, "TDA9840_SWITCH: 0x%02x\n", byte);
-	tda9840_write(sd, SWITCH, byte);
-	return 0;
-}
-
-static int tda9840_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *t)
-{
-	int stat = tda9840_status(sd);
-
-	if (stat < 0)
-		return stat;
-
-	t->rxsubchans = V4L2_TUNER_SUB_MONO;
-
-	switch (stat & 0x60) {
-	case 0x00:
-		t->rxsubchans = V4L2_TUNER_SUB_MONO;
-		break;
-	case 0x20:
-		t->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
-		break;
-	case 0x40:
-		t->rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO;
-		break;
-	default: /* Incorrect detect */
-		t->rxsubchans = V4L2_TUNER_MODE_MONO;
-		break;
-	}
-	return 0;
-}
-
-static int tda9840_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TDA9840, 0);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops tda9840_core_ops = {
-	.g_chip_ident = tda9840_g_chip_ident,
-};
-
-static const struct v4l2_subdev_tuner_ops tda9840_tuner_ops = {
-	.s_tuner = tda9840_s_tuner,
-	.g_tuner = tda9840_g_tuner,
-};
-
-static const struct v4l2_subdev_ops tda9840_ops = {
-	.core = &tda9840_core_ops,
-	.tuner = &tda9840_tuner_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static int tda9840_probe(struct i2c_client *client,
-			  const struct i2c_device_id *id)
-{
-	struct v4l2_subdev *sd;
-
-	/* let's see whether this adapter can support what we need */
-	if (!i2c_check_functionality(client->adapter,
-			I2C_FUNC_SMBUS_READ_BYTE_DATA |
-			I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
-		return -EIO;
-
-	v4l_info(client, "chip found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
-	if (sd == NULL)
-		return -ENOMEM;
-	v4l2_i2c_subdev_init(sd, client, &tda9840_ops);
-
-	/* set initial values for level & stereo - adjustment, mode */
-	tda9840_write(sd, LEVEL_ADJUST, 0);
-	tda9840_write(sd, STEREO_ADJUST, 0);
-	tda9840_write(sd, SWITCH, TDA9840_SET_STEREO);
-	return 0;
-}
-
-static int tda9840_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-
-	v4l2_device_unregister_subdev(sd);
-	kfree(sd);
-	return 0;
-}
-
-static const struct i2c_device_id tda9840_id[] = {
-	{ "tda9840", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, tda9840_id);
-
-static struct i2c_driver tda9840_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "tda9840",
-	},
-	.probe		= tda9840_probe,
-	.remove		= tda9840_remove,
-	.id_table	= tda9840_id,
-};
-
-module_i2c_driver(tda9840_driver);
diff --git a/drivers/media/video/tea6415c.c b/drivers/media/video/tea6415c.c
deleted file mode 100644
index d1d6ea1..0000000
--- a/drivers/media/video/tea6415c.c
+++ /dev/null
@@ -1,187 +0,0 @@
- /*
-    tea6415c - i2c-driver for the tea6415c by SGS Thomson
-
-    Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de>
-    Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl>
-
-    The tea6415c is a bus controlled video-matrix-switch
-    with 8 inputs and 6 outputs.
-    It is cascadable, i.e. it can be found at the addresses
-    0x86 and 0x06 on the i2c-bus.
-
-    For detailed informations download the specifications directly
-    from SGS Thomson at http://www.st.com
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License vs published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mvss Ave, Cambridge, MA 02139, USA.
-  */
-
-
-#include <linux/module.h>
-#include <linux/ioctl.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-#include "tea6415c.h"
-
-MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
-MODULE_DESCRIPTION("tea6415c driver");
-MODULE_LICENSE("GPL");
-
-static int debug;
-module_param(debug, int, 0644);
-
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
-
-
-/* makes a connection between the input-pin 'i' and the output-pin 'o' */
-static int tea6415c_s_routing(struct v4l2_subdev *sd,
-			      u32 i, u32 o, u32 config)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u8 byte = 0;
-	int ret;
-
-	v4l2_dbg(1, debug, sd, "i=%d, o=%d\n", i, o);
-
-	/* check if the pins are valid */
-	if (0 == ((1 == i ||  3 == i ||  5 == i ||  6 == i ||  8 == i || 10 == i || 20 == i || 11 == i)
-	      && (18 == o || 17 == o || 16 == o || 15 == o || 14 == o || 13 == o)))
-		return -EINVAL;
-
-	/* to understand this, have a look at the tea6415c-specs (p.5) */
-	switch (o) {
-	case 18:
-		byte = 0x00;
-		break;
-	case 14:
-		byte = 0x20;
-		break;
-	case 16:
-		byte = 0x10;
-		break;
-	case 17:
-		byte = 0x08;
-		break;
-	case 15:
-		byte = 0x18;
-		break;
-	case 13:
-		byte = 0x28;
-		break;
-	};
-
-	switch (i) {
-	case 5:
-		byte |= 0x00;
-		break;
-	case 8:
-		byte |= 0x04;
-		break;
-	case 3:
-		byte |= 0x02;
-		break;
-	case 20:
-		byte |= 0x06;
-		break;
-	case 6:
-		byte |= 0x01;
-		break;
-	case 10:
-		byte |= 0x05;
-		break;
-	case 1:
-		byte |= 0x03;
-		break;
-	case 11:
-		byte |= 0x07;
-		break;
-	};
-
-	ret = i2c_smbus_write_byte(client, byte);
-	if (ret) {
-		v4l2_dbg(1, debug, sd,
-			"i2c_smbus_write_byte() failed, ret:%d\n", ret);
-		return -EIO;
-	}
-	return ret;
-}
-
-static int tea6415c_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TEA6415C, 0);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops tea6415c_core_ops = {
-	.g_chip_ident = tea6415c_g_chip_ident,
-};
-
-static const struct v4l2_subdev_video_ops tea6415c_video_ops = {
-	.s_routing = tea6415c_s_routing,
-};
-
-static const struct v4l2_subdev_ops tea6415c_ops = {
-	.core = &tea6415c_core_ops,
-	.video = &tea6415c_video_ops,
-};
-
-static int tea6415c_probe(struct i2c_client *client,
-			  const struct i2c_device_id *id)
-{
-	struct v4l2_subdev *sd;
-
-	/* let's see whether this adapter can support what we need */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE))
-		return -EIO;
-
-	v4l_info(client, "chip found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-	sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
-	if (sd == NULL)
-		return -ENOMEM;
-	v4l2_i2c_subdev_init(sd, client, &tea6415c_ops);
-	return 0;
-}
-
-static int tea6415c_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-
-	v4l2_device_unregister_subdev(sd);
-	kfree(sd);
-	return 0;
-}
-
-static const struct i2c_device_id tea6415c_id[] = {
-	{ "tea6415c", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, tea6415c_id);
-
-static struct i2c_driver tea6415c_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "tea6415c",
-	},
-	.probe		= tea6415c_probe,
-	.remove		= tea6415c_remove,
-	.id_table	= tea6415c_id,
-};
-
-module_i2c_driver(tea6415c_driver);
diff --git a/drivers/media/video/tea6415c.h b/drivers/media/video/tea6415c.h
deleted file mode 100644
index 3a47d697..0000000
--- a/drivers/media/video/tea6415c.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef __INCLUDED_TEA6415C__
-#define __INCLUDED_TEA6415C__
-
-/* the tea6415c's design is quite brain-dead. although there are
-   8 inputs and 6 outputs, these aren't enumerated in any way. because
-   I don't want to say "connect input pin 20 to output pin 17", I define
-   a "virtual" pin-order. */
-
-/* input pins */
-#define TEA6415C_OUTPUT1 18
-#define TEA6415C_OUTPUT2 14
-#define TEA6415C_OUTPUT3 16
-#define TEA6415C_OUTPUT4 17
-#define TEA6415C_OUTPUT5 13
-#define TEA6415C_OUTPUT6 15
-
-/* output pins */
-#define TEA6415C_INPUT1 5
-#define TEA6415C_INPUT2 8
-#define TEA6415C_INPUT3 3
-#define TEA6415C_INPUT4 20
-#define TEA6415C_INPUT5 6
-#define TEA6415C_INPUT6 10
-#define TEA6415C_INPUT7 1
-#define TEA6415C_INPUT8 11
-
-#endif
diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c
deleted file mode 100644
index 3875721..0000000
--- a/drivers/media/video/tea6420.c
+++ /dev/null
@@ -1,169 +0,0 @@
- /*
-    tea6420 - i2c-driver for the tea6420 by SGS Thomson
-
-    Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de>
-    Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl>
-
-    The tea6420 is a bus controlled audio-matrix with 5 stereo inputs,
-    4 stereo outputs and gain control for each output.
-    It is cascadable, i.e. it can be found at the addresses 0x98
-    and 0x9a on the i2c-bus.
-
-    For detailed informations download the specifications directly
-    from SGS Thomson at http://www.st.com
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-  */
-
-
-#include <linux/module.h>
-#include <linux/ioctl.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-#include "tea6420.h"
-
-MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
-MODULE_DESCRIPTION("tea6420 driver");
-MODULE_LICENSE("GPL");
-
-static int debug;
-module_param(debug, int, 0644);
-
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
-
-
-/* make a connection between the input 'i' and the output 'o'
-   with gain 'g' (note: i = 6 means 'mute') */
-static int tea6420_s_routing(struct v4l2_subdev *sd,
-			     u32 i, u32 o, u32 config)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	int g = (o >> 4) & 0xf;
-	u8 byte;
-	int ret;
-
-	o &= 0xf;
-	v4l2_dbg(1, debug, sd, "i=%d, o=%d, g=%d\n", i, o, g);
-
-	/* check if the parameters are valid */
-	if (i < 1 || i > 6 || o < 1 || o > 4 || g < 0 || g > 6 || g % 2 != 0)
-		return -EINVAL;
-
-	byte = ((o - 1) << 5);
-	byte |= (i - 1);
-
-	/* to understand this, have a look at the tea6420-specs (p.5) */
-	switch (g) {
-	case 0:
-		byte |= (3 << 3);
-		break;
-	case 2:
-		byte |= (2 << 3);
-		break;
-	case 4:
-		byte |= (1 << 3);
-		break;
-	case 6:
-		break;
-	}
-
-	ret = i2c_smbus_write_byte(client, byte);
-	if (ret) {
-		v4l2_dbg(1, debug, sd,
-			"i2c_smbus_write_byte() failed, ret:%d\n", ret);
-		return -EIO;
-	}
-	return 0;
-}
-
-static int tea6420_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TEA6420, 0);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops tea6420_core_ops = {
-	.g_chip_ident = tea6420_g_chip_ident,
-};
-
-static const struct v4l2_subdev_audio_ops tea6420_audio_ops = {
-	.s_routing = tea6420_s_routing,
-};
-
-static const struct v4l2_subdev_ops tea6420_ops = {
-	.core = &tea6420_core_ops,
-	.audio = &tea6420_audio_ops,
-};
-
-static int tea6420_probe(struct i2c_client *client,
-			  const struct i2c_device_id *id)
-{
-	struct v4l2_subdev *sd;
-	int err, i;
-
-	/* let's see whether this adapter can support what we need */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE))
-		return -EIO;
-
-	v4l_info(client, "chip found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
-	if (sd == NULL)
-		return -ENOMEM;
-	v4l2_i2c_subdev_init(sd, client, &tea6420_ops);
-
-	/* set initial values: set "mute"-input to all outputs at gain 0 */
-	err = 0;
-	for (i = 1; i < 5; i++)
-		err += tea6420_s_routing(sd, 6, i, 0);
-	if (err) {
-		v4l_dbg(1, debug, client, "could not initialize tea6420\n");
-		return -ENODEV;
-	}
-	return 0;
-}
-
-static int tea6420_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-
-	v4l2_device_unregister_subdev(sd);
-	kfree(sd);
-	return 0;
-}
-
-static const struct i2c_device_id tea6420_id[] = {
-	{ "tea6420", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, tea6420_id);
-
-static struct i2c_driver tea6420_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "tea6420",
-	},
-	.probe		= tea6420_probe,
-	.remove		= tea6420_remove,
-	.id_table	= tea6420_id,
-};
-
-module_i2c_driver(tea6420_driver);
diff --git a/drivers/media/video/tea6420.h b/drivers/media/video/tea6420.h
deleted file mode 100644
index 4aa3edb..0000000
--- a/drivers/media/video/tea6420.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef __INCLUDED_TEA6420__
-#define __INCLUDED_TEA6420__
-
-/* input pins */
-#define TEA6420_OUTPUT1 1
-#define TEA6420_OUTPUT2 2
-#define TEA6420_OUTPUT3 3
-#define TEA6420_OUTPUT4 4
-
-/* output pins */
-#define TEA6420_INPUT1 1
-#define TEA6420_INPUT2 2
-#define TEA6420_INPUT3 3
-#define TEA6420_INPUT4 4
-#define TEA6420_INPUT5 5
-#define TEA6420_INPUT6 6
-
-/* gain on the output pins, ORed with the output pin */
-#define TEA6420_GAIN0 0x00
-#define TEA6420_GAIN2 0x20
-#define TEA6420_GAIN4 0x40
-#define TEA6420_GAIN6 0x60
-
-#endif
diff --git a/drivers/media/video/ths7303.c b/drivers/media/video/ths7303.c
deleted file mode 100644
index e5c0eed..0000000
--- a/drivers/media/video/ths7303.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * ths7303- THS7303 Video Amplifier driver
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed .as is. WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ctype.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/uaccess.h>
-#include <linux/videodev2.h>
-
-#include <media/v4l2-device.h>
-#include <media/v4l2-subdev.h>
-#include <media/v4l2-chip-ident.h>
-
-MODULE_DESCRIPTION("TI THS7303 video amplifier driver");
-MODULE_AUTHOR("Chaithrika U S");
-MODULE_LICENSE("GPL");
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Debug level 0-1");
-
-/* following function is used to set ths7303 */
-static int ths7303_setvalue(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	int err = 0;
-	u8 val;
-	struct i2c_client *client;
-
-	client = v4l2_get_subdevdata(sd);
-
-	if (std & (V4L2_STD_ALL & ~V4L2_STD_SECAM)) {
-		val = 0x02;
-		v4l2_dbg(1, debug, sd, "setting value for SDTV format\n");
-	} else {
-		val = 0x00;
-		v4l2_dbg(1, debug, sd, "disabling all channels\n");
-	}
-
-	err |= i2c_smbus_write_byte_data(client, 0x01, val);
-	err |= i2c_smbus_write_byte_data(client, 0x02, val);
-	err |= i2c_smbus_write_byte_data(client, 0x03, val);
-
-	if (err)
-		v4l2_err(sd, "write failed\n");
-
-	return err;
-}
-
-static int ths7303_s_std_output(struct v4l2_subdev *sd, v4l2_std_id norm)
-{
-	return ths7303_setvalue(sd, norm);
-}
-
-static int ths7303_g_chip_ident(struct v4l2_subdev *sd,
-				struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_THS7303, 0);
-}
-
-static const struct v4l2_subdev_video_ops ths7303_video_ops = {
-	.s_std_output	= ths7303_s_std_output,
-};
-
-static const struct v4l2_subdev_core_ops ths7303_core_ops = {
-	.g_chip_ident = ths7303_g_chip_ident,
-};
-
-static const struct v4l2_subdev_ops ths7303_ops = {
-	.core	= &ths7303_core_ops,
-	.video 	= &ths7303_video_ops,
-};
-
-static int ths7303_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	struct v4l2_subdev *sd;
-	v4l2_std_id std_id = V4L2_STD_NTSC;
-
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -ENODEV;
-
-	v4l_info(client, "chip found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	sd = kzalloc(sizeof(struct v4l2_subdev), GFP_KERNEL);
-	if (sd == NULL)
-		return -ENOMEM;
-
-	v4l2_i2c_subdev_init(sd, client, &ths7303_ops);
-
-	return ths7303_setvalue(sd, std_id);
-}
-
-static int ths7303_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-
-	v4l2_device_unregister_subdev(sd);
-	kfree(sd);
-
-	return 0;
-}
-
-static const struct i2c_device_id ths7303_id[] = {
-	{"ths7303", 0},
-	{},
-};
-
-MODULE_DEVICE_TABLE(i2c, ths7303_id);
-
-static struct i2c_driver ths7303_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "ths7303",
-	},
-	.probe		= ths7303_probe,
-	.remove		= ths7303_remove,
-	.id_table	= ths7303_id,
-};
-
-module_i2c_driver(ths7303_driver);
diff --git a/drivers/media/video/tlv320aic23b.c b/drivers/media/video/tlv320aic23b.c
deleted file mode 100644
index 809a75a..0000000
--- a/drivers/media/video/tlv320aic23b.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * tlv320aic23b - driver version 0.0.1
- *
- * Copyright (C) 2006 Scott Alfter <salfter@ssai.us>
- *
- * Based on wm8775 driver
- *
- * Copyright (C) 2004 Ulf Eklund <ivtv at eklund.to>
- * Copyright (C) 2005 Hans Verkuil <hverkuil@xs4all.nl>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/ioctl.h>
-#include <asm/uaccess.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ctrls.h>
-
-MODULE_DESCRIPTION("tlv320aic23b driver");
-MODULE_AUTHOR("Scott Alfter, Ulf Eklund, Hans Verkuil");
-MODULE_LICENSE("GPL");
-
-
-/* ----------------------------------------------------------------------- */
-
-struct tlv320aic23b_state {
-	struct v4l2_subdev sd;
-	struct v4l2_ctrl_handler hdl;
-};
-
-static inline struct tlv320aic23b_state *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct tlv320aic23b_state, sd);
-}
-
-static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
-{
-	return &container_of(ctrl->handler, struct tlv320aic23b_state, hdl)->sd;
-}
-
-static int tlv320aic23b_write(struct v4l2_subdev *sd, int reg, u16 val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	int i;
-
-	if ((reg < 0 || reg > 9) && (reg != 15)) {
-		v4l2_err(sd, "Invalid register R%d\n", reg);
-		return -1;
-	}
-
-	for (i = 0; i < 3; i++)
-		if (i2c_smbus_write_byte_data(client,
-				(reg << 1) | (val >> 8), val & 0xff) == 0)
-			return 0;
-	v4l2_err(sd, "I2C: cannot write %03x to register R%d\n", val, reg);
-	return -1;
-}
-
-static int tlv320aic23b_s_clock_freq(struct v4l2_subdev *sd, u32 freq)
-{
-	switch (freq) {
-	case 32000: /* set sample rate to 32 kHz */
-		tlv320aic23b_write(sd, 8, 0x018);
-		break;
-	case 44100: /* set sample rate to 44.1 kHz */
-		tlv320aic23b_write(sd, 8, 0x022);
-		break;
-	case 48000: /* set sample rate to 48 kHz */
-		tlv320aic23b_write(sd, 8, 0x000);
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int tlv320aic23b_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		tlv320aic23b_write(sd, 0, 0x180); /* mute both channels */
-		/* set gain on both channels to +3.0 dB */
-		if (!ctrl->val)
-			tlv320aic23b_write(sd, 0, 0x119);
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static int tlv320aic23b_log_status(struct v4l2_subdev *sd)
-{
-	struct tlv320aic23b_state *state = to_state(sd);
-
-	v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_ctrl_ops tlv320aic23b_ctrl_ops = {
-	.s_ctrl = tlv320aic23b_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops tlv320aic23b_core_ops = {
-	.log_status = tlv320aic23b_log_status,
-	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
-	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
-	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
-	.g_ctrl = v4l2_subdev_g_ctrl,
-	.s_ctrl = v4l2_subdev_s_ctrl,
-	.queryctrl = v4l2_subdev_queryctrl,
-	.querymenu = v4l2_subdev_querymenu,
-};
-
-static const struct v4l2_subdev_audio_ops tlv320aic23b_audio_ops = {
-	.s_clock_freq = tlv320aic23b_s_clock_freq,
-};
-
-static const struct v4l2_subdev_ops tlv320aic23b_ops = {
-	.core = &tlv320aic23b_core_ops,
-	.audio = &tlv320aic23b_audio_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-/* i2c implementation */
-
-/*
- * Generic i2c probe
- * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
- */
-
-static int tlv320aic23b_probe(struct i2c_client *client,
-			      const struct i2c_device_id *id)
-{
-	struct tlv320aic23b_state *state;
-	struct v4l2_subdev *sd;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -EIO;
-
-	v4l_info(client, "chip found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	state = kzalloc(sizeof(struct tlv320aic23b_state), GFP_KERNEL);
-	if (state == NULL)
-		return -ENOMEM;
-	sd = &state->sd;
-	v4l2_i2c_subdev_init(sd, client, &tlv320aic23b_ops);
-
-	/* Initialize tlv320aic23b */
-
-	/* RESET */
-	tlv320aic23b_write(sd, 15, 0x000);
-	/* turn off DAC & mic input */
-	tlv320aic23b_write(sd, 6, 0x00A);
-	/* left-justified, 24-bit, master mode */
-	tlv320aic23b_write(sd, 7, 0x049);
-	/* set gain on both channels to +3.0 dB */
-	tlv320aic23b_write(sd, 0, 0x119);
-	/* set sample rate to 48 kHz */
-	tlv320aic23b_write(sd, 8, 0x000);
-	/* activate digital interface */
-	tlv320aic23b_write(sd, 9, 0x001);
-
-	v4l2_ctrl_handler_init(&state->hdl, 1);
-	v4l2_ctrl_new_std(&state->hdl, &tlv320aic23b_ctrl_ops,
-			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
-	sd->ctrl_handler = &state->hdl;
-	if (state->hdl.error) {
-		int err = state->hdl.error;
-
-		v4l2_ctrl_handler_free(&state->hdl);
-		kfree(state);
-		return err;
-	}
-	v4l2_ctrl_handler_setup(&state->hdl);
-	return 0;
-}
-
-static int tlv320aic23b_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct tlv320aic23b_state *state = to_state(sd);
-
-	v4l2_device_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(&state->hdl);
-	kfree(state);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct i2c_device_id tlv320aic23b_id[] = {
-	{ "tlv320aic23b", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, tlv320aic23b_id);
-
-static struct i2c_driver tlv320aic23b_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "tlv320aic23b",
-	},
-	.probe		= tlv320aic23b_probe,
-	.remove		= tlv320aic23b_remove,
-	.id_table	= tlv320aic23b_id,
-};
-
-module_i2c_driver(tlv320aic23b_driver);
diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c
deleted file mode 100644
index 321b315..0000000
--- a/drivers/media/video/tvaudio.c
+++ /dev/null
@@ -1,2118 +0,0 @@
-/*
- * Driver for simple i2c audio chips.
- *
- * Copyright (c) 2000 Gerd Knorr
- * based on code by:
- *   Eric Sandeen (eric_sandeen@bigfoot.com)
- *   Steve VanDeBogart (vandebo@uclink.berkeley.edu)
- *   Greg Alexander (galexand@acm.org)
- *
- * Copyright(c) 2005-2008 Mauro Carvalho Chehab
- *	- Some cleanups, code fixes, etc
- *	- Convert it to V4L2 API
- *
- * This code is placed under the terms of the GNU General Public License
- *
- * OPTIONS:
- *   debug - set to 1 if you'd like to see debug messages
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/videodev2.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/kthread.h>
-#include <linux/freezer.h>
-
-#include <media/tvaudio.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-
-#include <media/i2c-addr.h>
-
-/* ---------------------------------------------------------------------- */
-/* insmod args                                                            */
-
-static int debug;	/* insmod parameter */
-module_param(debug, int, 0644);
-
-MODULE_DESCRIPTION("device driver for various i2c TV sound decoder / audiomux chips");
-MODULE_AUTHOR("Eric Sandeen, Steve VanDeBogart, Greg Alexander, Gerd Knorr");
-MODULE_LICENSE("GPL");
-
-#define UNSET    (-1U)
-
-/* ---------------------------------------------------------------------- */
-/* our structs                                                            */
-
-#define MAXREGS 256
-
-struct CHIPSTATE;
-typedef int  (*getvalue)(int);
-typedef int  (*checkit)(struct CHIPSTATE*);
-typedef int  (*initialize)(struct CHIPSTATE*);
-typedef int  (*getrxsubchans)(struct CHIPSTATE *);
-typedef void (*setaudmode)(struct CHIPSTATE*, int mode);
-
-/* i2c command */
-typedef struct AUDIOCMD {
-	int             count;             /* # of bytes to send */
-	unsigned char   bytes[MAXREGS+1];  /* addr, data, data, ... */
-} audiocmd;
-
-/* chip description */
-struct CHIPDESC {
-	char       *name;             /* chip name         */
-	int        addr_lo, addr_hi;  /* i2c address range */
-	int        registers;         /* # of registers    */
-
-	int        *insmodopt;
-	checkit    checkit;
-	initialize initialize;
-	int        flags;
-#define CHIP_HAS_VOLUME      1
-#define CHIP_HAS_BASSTREBLE  2
-#define CHIP_HAS_INPUTSEL    4
-#define CHIP_NEED_CHECKMODE  8
-
-	/* various i2c command sequences */
-	audiocmd   init;
-
-	/* which register has which value */
-	int    leftreg,rightreg,treblereg,bassreg;
-
-	/* initialize with (defaults to 65535/65535/32768/32768 */
-	int    leftinit,rightinit,trebleinit,bassinit;
-
-	/* functions to convert the values (v4l -> chip) */
-	getvalue volfunc,treblefunc,bassfunc;
-
-	/* get/set mode */
-	getrxsubchans	getrxsubchans;
-	setaudmode	setaudmode;
-
-	/* input switch register + values for v4l inputs */
-	int  inputreg;
-	int  inputmap[4];
-	int  inputmute;
-	int  inputmask;
-};
-
-/* current state of the chip */
-struct CHIPSTATE {
-	struct v4l2_subdev sd;
-
-	/* chip-specific description - should point to
-	   an entry at CHIPDESC table */
-	struct CHIPDESC *desc;
-
-	/* shadow register set */
-	audiocmd   shadow;
-
-	/* current settings */
-	__u16 left, right, treble, bass, muted;
-	int prevmode;
-	int radio;
-	int input;
-
-	/* thread */
-	struct task_struct   *thread;
-	struct timer_list    wt;
-	int 		     audmode;
-};
-
-static inline struct CHIPSTATE *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct CHIPSTATE, sd);
-}
-
-
-/* ---------------------------------------------------------------------- */
-/* i2c I/O functions                                                      */
-
-static int chip_write(struct CHIPSTATE *chip, int subaddr, int val)
-{
-	struct v4l2_subdev *sd = &chip->sd;
-	struct i2c_client *c = v4l2_get_subdevdata(sd);
-	unsigned char buffer[2];
-
-	if (subaddr < 0) {
-		v4l2_dbg(1, debug, sd, "chip_write: 0x%x\n", val);
-		chip->shadow.bytes[1] = val;
-		buffer[0] = val;
-		if (1 != i2c_master_send(c, buffer, 1)) {
-			v4l2_warn(sd, "I/O error (write 0x%x)\n", val);
-			return -1;
-		}
-	} else {
-		if (subaddr + 1 >= ARRAY_SIZE(chip->shadow.bytes)) {
-			v4l2_info(sd,
-				"Tried to access a non-existent register: %d\n",
-				subaddr);
-			return -EINVAL;
-		}
-
-		v4l2_dbg(1, debug, sd, "chip_write: reg%d=0x%x\n",
-			subaddr, val);
-		chip->shadow.bytes[subaddr+1] = val;
-		buffer[0] = subaddr;
-		buffer[1] = val;
-		if (2 != i2c_master_send(c, buffer, 2)) {
-			v4l2_warn(sd, "I/O error (write reg%d=0x%x)\n",
-				subaddr, val);
-			return -1;
-		}
-	}
-	return 0;
-}
-
-static int chip_write_masked(struct CHIPSTATE *chip,
-			     int subaddr, int val, int mask)
-{
-	struct v4l2_subdev *sd = &chip->sd;
-
-	if (mask != 0) {
-		if (subaddr < 0) {
-			val = (chip->shadow.bytes[1] & ~mask) | (val & mask);
-		} else {
-			if (subaddr + 1 >= ARRAY_SIZE(chip->shadow.bytes)) {
-				v4l2_info(sd,
-					"Tried to access a non-existent register: %d\n",
-					subaddr);
-				return -EINVAL;
-			}
-
-			val = (chip->shadow.bytes[subaddr+1] & ~mask) | (val & mask);
-		}
-	}
-	return chip_write(chip, subaddr, val);
-}
-
-static int chip_read(struct CHIPSTATE *chip)
-{
-	struct v4l2_subdev *sd = &chip->sd;
-	struct i2c_client *c = v4l2_get_subdevdata(sd);
-	unsigned char buffer;
-
-	if (1 != i2c_master_recv(c, &buffer, 1)) {
-		v4l2_warn(sd, "I/O error (read)\n");
-		return -1;
-	}
-	v4l2_dbg(1, debug, sd, "chip_read: 0x%x\n", buffer);
-	return buffer;
-}
-
-static int chip_read2(struct CHIPSTATE *chip, int subaddr)
-{
-	struct v4l2_subdev *sd = &chip->sd;
-	struct i2c_client *c = v4l2_get_subdevdata(sd);
-	unsigned char write[1];
-	unsigned char read[1];
-	struct i2c_msg msgs[2] = {
-		{ c->addr, 0,        1, write },
-		{ c->addr, I2C_M_RD, 1, read  }
-	};
-
-	write[0] = subaddr;
-
-	if (2 != i2c_transfer(c->adapter, msgs, 2)) {
-		v4l2_warn(sd, "I/O error (read2)\n");
-		return -1;
-	}
-	v4l2_dbg(1, debug, sd, "chip_read2: reg%d=0x%x\n",
-		subaddr, read[0]);
-	return read[0];
-}
-
-static int chip_cmd(struct CHIPSTATE *chip, char *name, audiocmd *cmd)
-{
-	struct v4l2_subdev *sd = &chip->sd;
-	struct i2c_client *c = v4l2_get_subdevdata(sd);
-	int i;
-
-	if (0 == cmd->count)
-		return 0;
-
-	if (cmd->count + cmd->bytes[0] - 1 >= ARRAY_SIZE(chip->shadow.bytes)) {
-		v4l2_info(sd,
-			 "Tried to access a non-existent register range: %d to %d\n",
-			 cmd->bytes[0] + 1, cmd->bytes[0] + cmd->count - 1);
-		return -EINVAL;
-	}
-
-	/* FIXME: it seems that the shadow bytes are wrong bellow !*/
-
-	/* update our shadow register set; print bytes if (debug > 0) */
-	v4l2_dbg(1, debug, sd, "chip_cmd(%s): reg=%d, data:",
-		name, cmd->bytes[0]);
-	for (i = 1; i < cmd->count; i++) {
-		if (debug)
-			printk(KERN_CONT " 0x%x", cmd->bytes[i]);
-		chip->shadow.bytes[i+cmd->bytes[0]] = cmd->bytes[i];
-	}
-	if (debug)
-		printk(KERN_CONT "\n");
-
-	/* send data to the chip */
-	if (cmd->count != i2c_master_send(c, cmd->bytes, cmd->count)) {
-		v4l2_warn(sd, "I/O error (%s)\n", name);
-		return -1;
-	}
-	return 0;
-}
-
-/* ---------------------------------------------------------------------- */
-/* kernel thread for doing i2c stuff asyncronly
- *   right now it is used only to check the audio mode (mono/stereo/whatever)
- *   some time after switching to another TV channel, then turn on stereo
- *   if available, ...
- */
-
-static void chip_thread_wake(unsigned long data)
-{
-	struct CHIPSTATE *chip = (struct CHIPSTATE*)data;
-	wake_up_process(chip->thread);
-}
-
-static int chip_thread(void *data)
-{
-	struct CHIPSTATE *chip = data;
-	struct CHIPDESC  *desc = chip->desc;
-	struct v4l2_subdev *sd = &chip->sd;
-	int mode, selected;
-
-	v4l2_dbg(1, debug, sd, "thread started\n");
-	set_freezable();
-	for (;;) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (!kthread_should_stop())
-			schedule();
-		set_current_state(TASK_RUNNING);
-		try_to_freeze();
-		if (kthread_should_stop())
-			break;
-		v4l2_dbg(1, debug, sd, "thread wakeup\n");
-
-		/* don't do anything for radio */
-		if (chip->radio)
-			continue;
-
-		/* have a look what's going on */
-		mode = desc->getrxsubchans(chip);
-		if (mode == chip->prevmode)
-			continue;
-
-		/* chip detected a new audio mode - set it */
-		v4l2_dbg(1, debug, sd, "thread checkmode\n");
-
-		chip->prevmode = mode;
-
-		selected = V4L2_TUNER_MODE_MONO;
-		switch (chip->audmode) {
-		case V4L2_TUNER_MODE_MONO:
-			if (mode & V4L2_TUNER_SUB_LANG1)
-				selected = V4L2_TUNER_MODE_LANG1;
-			break;
-		case V4L2_TUNER_MODE_STEREO:
-		case V4L2_TUNER_MODE_LANG1:
-			if (mode & V4L2_TUNER_SUB_LANG1)
-				selected = V4L2_TUNER_MODE_LANG1;
-			else if (mode & V4L2_TUNER_SUB_STEREO)
-				selected = V4L2_TUNER_MODE_STEREO;
-			break;
-		case V4L2_TUNER_MODE_LANG2:
-			if (mode & V4L2_TUNER_SUB_LANG2)
-				selected = V4L2_TUNER_MODE_LANG2;
-			else if (mode & V4L2_TUNER_SUB_STEREO)
-				selected = V4L2_TUNER_MODE_STEREO;
-			break;
-		case V4L2_TUNER_MODE_LANG1_LANG2:
-			if (mode & V4L2_TUNER_SUB_LANG2)
-				selected = V4L2_TUNER_MODE_LANG1_LANG2;
-			else if (mode & V4L2_TUNER_SUB_STEREO)
-				selected = V4L2_TUNER_MODE_STEREO;
-		}
-		desc->setaudmode(chip, selected);
-
-		/* schedule next check */
-		mod_timer(&chip->wt, jiffies+msecs_to_jiffies(2000));
-	}
-
-	v4l2_dbg(1, debug, sd, "thread exiting\n");
-	return 0;
-}
-
-/* ---------------------------------------------------------------------- */
-/* audio chip descriptions - defines+functions for tda9840                */
-
-#define TDA9840_SW         0x00
-#define TDA9840_LVADJ      0x02
-#define TDA9840_STADJ      0x03
-#define TDA9840_TEST       0x04
-
-#define TDA9840_MONO       0x10
-#define TDA9840_STEREO     0x2a
-#define TDA9840_DUALA      0x12
-#define TDA9840_DUALB      0x1e
-#define TDA9840_DUALAB     0x1a
-#define TDA9840_DUALBA     0x16
-#define TDA9840_EXTERNAL   0x7a
-
-#define TDA9840_DS_DUAL    0x20 /* Dual sound identified          */
-#define TDA9840_ST_STEREO  0x40 /* Stereo sound identified        */
-#define TDA9840_PONRES     0x80 /* Power-on reset detected if = 1 */
-
-#define TDA9840_TEST_INT1SN 0x1 /* Integration time 0.5s when set */
-#define TDA9840_TEST_INTFU 0x02 /* Disables integrator function */
-
-static int tda9840_getrxsubchans(struct CHIPSTATE *chip)
-{
-	struct v4l2_subdev *sd = &chip->sd;
-	int val, mode;
-
-	val = chip_read(chip);
-	mode = V4L2_TUNER_SUB_MONO;
-	if (val & TDA9840_DS_DUAL)
-		mode |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
-	if (val & TDA9840_ST_STEREO)
-		mode = V4L2_TUNER_SUB_STEREO;
-
-	v4l2_dbg(1, debug, sd,
-		"tda9840_getrxsubchans(): raw chip read: %d, return: %d\n",
-		val, mode);
-	return mode;
-}
-
-static void tda9840_setaudmode(struct CHIPSTATE *chip, int mode)
-{
-	int update = 1;
-	int t = chip->shadow.bytes[TDA9840_SW + 1] & ~0x7e;
-
-	switch (mode) {
-	case V4L2_TUNER_MODE_MONO:
-		t |= TDA9840_MONO;
-		break;
-	case V4L2_TUNER_MODE_STEREO:
-		t |= TDA9840_STEREO;
-		break;
-	case V4L2_TUNER_MODE_LANG1:
-		t |= TDA9840_DUALA;
-		break;
-	case V4L2_TUNER_MODE_LANG2:
-		t |= TDA9840_DUALB;
-		break;
-	case V4L2_TUNER_MODE_LANG1_LANG2:
-		t |= TDA9840_DUALAB;
-		break;
-	default:
-		update = 0;
-	}
-
-	if (update)
-		chip_write(chip, TDA9840_SW, t);
-}
-
-static int tda9840_checkit(struct CHIPSTATE *chip)
-{
-	int rc;
-	rc = chip_read(chip);
-	/* lower 5 bits should be 0 */
-	return ((rc & 0x1f) == 0) ? 1 : 0;
-}
-
-/* ---------------------------------------------------------------------- */
-/* audio chip descriptions - defines+functions for tda985x                */
-
-/* subaddresses for TDA9855 */
-#define TDA9855_VR	0x00 /* Volume, right */
-#define TDA9855_VL	0x01 /* Volume, left */
-#define TDA9855_BA	0x02 /* Bass */
-#define TDA9855_TR	0x03 /* Treble */
-#define TDA9855_SW	0x04 /* Subwoofer - not connected on DTV2000 */
-
-/* subaddresses for TDA9850 */
-#define TDA9850_C4	0x04 /* Control 1 for TDA9850 */
-
-/* subaddesses for both chips */
-#define TDA985x_C5	0x05 /* Control 2 for TDA9850, Control 1 for TDA9855 */
-#define TDA985x_C6	0x06 /* Control 3 for TDA9850, Control 2 for TDA9855 */
-#define TDA985x_C7	0x07 /* Control 4 for TDA9850, Control 3 for TDA9855 */
-#define TDA985x_A1	0x08 /* Alignment 1 for both chips */
-#define TDA985x_A2	0x09 /* Alignment 2 for both chips */
-#define TDA985x_A3	0x0a /* Alignment 3 for both chips */
-
-/* Masks for bits in TDA9855 subaddresses */
-/* 0x00 - VR in TDA9855 */
-/* 0x01 - VL in TDA9855 */
-/* lower 7 bits control gain from -71dB (0x28) to 16dB (0x7f)
- * in 1dB steps - mute is 0x27 */
-
-
-/* 0x02 - BA in TDA9855 */
-/* lower 5 bits control bass gain from -12dB (0x06) to 16.5dB (0x19)
- * in .5dB steps - 0 is 0x0E */
-
-
-/* 0x03 - TR in TDA9855 */
-/* 4 bits << 1 control treble gain from -12dB (0x3) to 12dB (0xb)
- * in 3dB steps - 0 is 0x7 */
-
-/* Masks for bits in both chips' subaddresses */
-/* 0x04 - SW in TDA9855, C4/Control 1 in TDA9850 */
-/* Unique to TDA9855: */
-/* 4 bits << 2 control subwoofer/surround gain from -14db (0x1) to 14db (0xf)
- * in 3dB steps - mute is 0x0 */
-
-/* Unique to TDA9850: */
-/* lower 4 bits control stereo noise threshold, over which stereo turns off
- * set to values of 0x00 through 0x0f for Ster1 through Ster16 */
-
-
-/* 0x05 - C5 - Control 1 in TDA9855 , Control 2 in TDA9850*/
-/* Unique to TDA9855: */
-#define TDA9855_MUTE	1<<7 /* GMU, Mute at outputs */
-#define TDA9855_AVL	1<<6 /* AVL, Automatic Volume Level */
-#define TDA9855_LOUD	1<<5 /* Loudness, 1==off */
-#define TDA9855_SUR	1<<3 /* Surround / Subwoofer 1==.5(L-R) 0==.5(L+R) */
-			     /* Bits 0 to 3 select various combinations
-			      * of line in and line out, only the
-			      * interesting ones are defined */
-#define TDA9855_EXT	1<<2 /* Selects inputs LIR and LIL.  Pins 41 & 12 */
-#define TDA9855_INT	0    /* Selects inputs LOR and LOL.  (internal) */
-
-/* Unique to TDA9850:  */
-/* lower 4 bits contol SAP noise threshold, over which SAP turns off
- * set to values of 0x00 through 0x0f for SAP1 through SAP16 */
-
-
-/* 0x06 - C6 - Control 2 in TDA9855, Control 3 in TDA9850 */
-/* Common to TDA9855 and TDA9850: */
-#define TDA985x_SAP	3<<6 /* Selects SAP output, mute if not received */
-#define TDA985x_MONOSAP	2<<6 /* Selects Mono on left, SAP on right */
-#define TDA985x_STEREO	1<<6 /* Selects Stereo ouput, mono if not received */
-#define TDA985x_MONO	0    /* Forces Mono output */
-#define TDA985x_LMU	1<<3 /* Mute (LOR/LOL for 9855, OUTL/OUTR for 9850) */
-
-/* Unique to TDA9855: */
-#define TDA9855_TZCM	1<<5 /* If set, don't mute till zero crossing */
-#define TDA9855_VZCM	1<<4 /* If set, don't change volume till zero crossing*/
-#define TDA9855_LINEAR	0    /* Linear Stereo */
-#define TDA9855_PSEUDO	1    /* Pseudo Stereo */
-#define TDA9855_SPAT_30	2    /* Spatial Stereo, 30% anti-phase crosstalk */
-#define TDA9855_SPAT_50	3    /* Spatial Stereo, 52% anti-phase crosstalk */
-#define TDA9855_E_MONO	7    /* Forced mono - mono select elseware, so useless*/
-
-/* 0x07 - C7 - Control 3 in TDA9855, Control 4 in TDA9850 */
-/* Common to both TDA9855 and TDA9850: */
-/* lower 4 bits control input gain from -3.5dB (0x0) to 4dB (0xF)
- * in .5dB steps -  0dB is 0x7 */
-
-/* 0x08, 0x09 - A1 and A2 (read/write) */
-/* Common to both TDA9855 and TDA9850: */
-/* lower 5 bites are wideband and spectral expander alignment
- * from 0x00 to 0x1f - nominal at 0x0f and 0x10 (read/write) */
-#define TDA985x_STP	1<<5 /* Stereo Pilot/detect (read-only) */
-#define TDA985x_SAPP	1<<6 /* SAP Pilot/detect (read-only) */
-#define TDA985x_STS	1<<7 /* Stereo trigger 1= <35mV 0= <30mV (write-only)*/
-
-/* 0x0a - A3 */
-/* Common to both TDA9855 and TDA9850: */
-/* lower 3 bits control timing current for alignment: -30% (0x0), -20% (0x1),
- * -10% (0x2), nominal (0x3), +10% (0x6), +20% (0x5), +30% (0x4) */
-#define TDA985x_ADJ	1<<7 /* Stereo adjust on/off (wideband and spectral */
-
-static int tda9855_volume(int val) { return val/0x2e8+0x27; }
-static int tda9855_bass(int val)   { return val/0xccc+0x06; }
-static int tda9855_treble(int val) { return (val/0x1c71+0x3)<<1; }
-
-static int  tda985x_getrxsubchans(struct CHIPSTATE *chip)
-{
-	int mode, val;
-
-	/* Add mono mode regardless of SAP and stereo */
-	/* Allows forced mono */
-	mode = V4L2_TUNER_SUB_MONO;
-	val = chip_read(chip);
-	if (val & TDA985x_STP)
-		mode = V4L2_TUNER_SUB_STEREO;
-	if (val & TDA985x_SAPP)
-		mode |= V4L2_TUNER_SUB_SAP;
-	return mode;
-}
-
-static void tda985x_setaudmode(struct CHIPSTATE *chip, int mode)
-{
-	int update = 1;
-	int c6 = chip->shadow.bytes[TDA985x_C6+1] & 0x3f;
-
-	switch (mode) {
-	case V4L2_TUNER_MODE_MONO:
-		c6 |= TDA985x_MONO;
-		break;
-	case V4L2_TUNER_MODE_STEREO:
-	case V4L2_TUNER_MODE_LANG1:
-		c6 |= TDA985x_STEREO;
-		break;
-	case V4L2_TUNER_MODE_SAP:
-		c6 |= TDA985x_SAP;
-		break;
-	case V4L2_TUNER_MODE_LANG1_LANG2:
-		c6 |= TDA985x_MONOSAP;
-		break;
-	default:
-		update = 0;
-	}
-	if (update)
-		chip_write(chip,TDA985x_C6,c6);
-}
-
-
-/* ---------------------------------------------------------------------- */
-/* audio chip descriptions - defines+functions for tda9873h               */
-
-/* Subaddresses for TDA9873H */
-
-#define TDA9873_SW	0x00 /* Switching                    */
-#define TDA9873_AD	0x01 /* Adjust                       */
-#define TDA9873_PT	0x02 /* Port                         */
-
-/* Subaddress 0x00: Switching Data
- * B7..B0:
- *
- * B1, B0: Input source selection
- *  0,  0  internal
- *  1,  0  external stereo
- *  0,  1  external mono
- */
-#define TDA9873_INP_MASK    3
-#define TDA9873_INTERNAL    0
-#define TDA9873_EXT_STEREO  2
-#define TDA9873_EXT_MONO    1
-
-/*    B3, B2: output signal select
- * B4    : transmission mode
- *  0, 0, 1   Mono
- *  1, 0, 0   Stereo
- *  1, 1, 1   Stereo (reversed channel)
- *  0, 0, 0   Dual AB
- *  0, 0, 1   Dual AA
- *  0, 1, 0   Dual BB
- *  0, 1, 1   Dual BA
- */
-
-#define TDA9873_TR_MASK     (7 << 2)
-#define TDA9873_TR_MONO     4
-#define TDA9873_TR_STEREO   1 << 4
-#define TDA9873_TR_REVERSE  ((1 << 3) | (1 << 2))
-#define TDA9873_TR_DUALA    1 << 2
-#define TDA9873_TR_DUALB    1 << 3
-#define TDA9873_TR_DUALAB   0
-
-/* output level controls
- * B5:  output level switch (0 = reduced gain, 1 = normal gain)
- * B6:  mute                (1 = muted)
- * B7:  auto-mute           (1 = auto-mute enabled)
- */
-
-#define TDA9873_GAIN_NORMAL 1 << 5
-#define TDA9873_MUTE        1 << 6
-#define TDA9873_AUTOMUTE    1 << 7
-
-/* Subaddress 0x01:  Adjust/standard */
-
-/* Lower 4 bits (C3..C0) control stereo adjustment on R channel (-0.6 - +0.7 dB)
- * Recommended value is +0 dB
- */
-
-#define	TDA9873_STEREO_ADJ	0x06 /* 0dB gain */
-
-/* Bits C6..C4 control FM stantard
- * C6, C5, C4
- *  0,  0,  0   B/G (PAL FM)
- *  0,  0,  1   M
- *  0,  1,  0   D/K(1)
- *  0,  1,  1   D/K(2)
- *  1,  0,  0   D/K(3)
- *  1,  0,  1   I
- */
-#define TDA9873_BG		0
-#define TDA9873_M       1
-#define TDA9873_DK1     2
-#define TDA9873_DK2     3
-#define TDA9873_DK3     4
-#define TDA9873_I       5
-
-/* C7 controls identification response time (1=fast/0=normal)
- */
-#define TDA9873_IDR_NORM 0
-#define TDA9873_IDR_FAST 1 << 7
-
-
-/* Subaddress 0x02: Port data */
-
-/* E1, E0   free programmable ports P1/P2
-    0,  0   both ports low
-    0,  1   P1 high
-    1,  0   P2 high
-    1,  1   both ports high
-*/
-
-#define TDA9873_PORTS    3
-
-/* E2: test port */
-#define TDA9873_TST_PORT 1 << 2
-
-/* E5..E3 control mono output channel (together with transmission mode bit B4)
- *
- * E5 E4 E3 B4     OUTM
- *  0  0  0  0     mono
- *  0  0  1  0     DUAL B
- *  0  1  0  1     mono (from stereo decoder)
- */
-#define TDA9873_MOUT_MONO   0
-#define TDA9873_MOUT_FMONO  0
-#define TDA9873_MOUT_DUALA  0
-#define TDA9873_MOUT_DUALB  1 << 3
-#define TDA9873_MOUT_ST     1 << 4
-#define TDA9873_MOUT_EXTM   ((1 << 4) | (1 << 3))
-#define TDA9873_MOUT_EXTL   1 << 5
-#define TDA9873_MOUT_EXTR   ((1 << 5) | (1 << 3))
-#define TDA9873_MOUT_EXTLR  ((1 << 5) | (1 << 4))
-#define TDA9873_MOUT_MUTE   ((1 << 5) | (1 << 4) | (1 << 3))
-
-/* Status bits: (chip read) */
-#define TDA9873_PONR        0 /* Power-on reset detected if = 1 */
-#define TDA9873_STEREO      2 /* Stereo sound is identified     */
-#define TDA9873_DUAL        4 /* Dual sound is identified       */
-
-static int tda9873_getrxsubchans(struct CHIPSTATE *chip)
-{
-	struct v4l2_subdev *sd = &chip->sd;
-	int val,mode;
-
-	val = chip_read(chip);
-	mode = V4L2_TUNER_SUB_MONO;
-	if (val & TDA9873_STEREO)
-		mode = V4L2_TUNER_SUB_STEREO;
-	if (val & TDA9873_DUAL)
-		mode |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
-	v4l2_dbg(1, debug, sd,
-		"tda9873_getrxsubchans(): raw chip read: %d, return: %d\n",
-		val, mode);
-	return mode;
-}
-
-static void tda9873_setaudmode(struct CHIPSTATE *chip, int mode)
-{
-	struct v4l2_subdev *sd = &chip->sd;
-	int sw_data  = chip->shadow.bytes[TDA9873_SW+1] & ~ TDA9873_TR_MASK;
-	/*	int adj_data = chip->shadow.bytes[TDA9873_AD+1] ; */
-
-	if ((sw_data & TDA9873_INP_MASK) != TDA9873_INTERNAL) {
-		v4l2_dbg(1, debug, sd,
-			 "tda9873_setaudmode(): external input\n");
-		return;
-	}
-
-	v4l2_dbg(1, debug, sd,
-		 "tda9873_setaudmode(): chip->shadow.bytes[%d] = %d\n",
-		 TDA9873_SW+1, chip->shadow.bytes[TDA9873_SW+1]);
-	v4l2_dbg(1, debug, sd, "tda9873_setaudmode(): sw_data  = %d\n",
-		 sw_data);
-
-	switch (mode) {
-	case V4L2_TUNER_MODE_MONO:
-		sw_data |= TDA9873_TR_MONO;
-		break;
-	case V4L2_TUNER_MODE_STEREO:
-		sw_data |= TDA9873_TR_STEREO;
-		break;
-	case V4L2_TUNER_MODE_LANG1:
-		sw_data |= TDA9873_TR_DUALA;
-		break;
-	case V4L2_TUNER_MODE_LANG2:
-		sw_data |= TDA9873_TR_DUALB;
-		break;
-	case V4L2_TUNER_MODE_LANG1_LANG2:
-		sw_data |= TDA9873_TR_DUALAB;
-		break;
-	default:
-		return;
-	}
-
-	chip_write(chip, TDA9873_SW, sw_data);
-	v4l2_dbg(1, debug, sd,
-		"tda9873_setaudmode(): req. mode %d; chip_write: %d\n",
-		mode, sw_data);
-}
-
-static int tda9873_checkit(struct CHIPSTATE *chip)
-{
-	int rc;
-
-	if (-1 == (rc = chip_read2(chip,254)))
-		return 0;
-	return (rc & ~0x1f) == 0x80;
-}
-
-
-/* ---------------------------------------------------------------------- */
-/* audio chip description - defines+functions for tda9874h and tda9874a   */
-/* Dariusz Kowalewski <darekk@automex.pl>                                 */
-
-/* Subaddresses for TDA9874H and TDA9874A (slave rx) */
-#define TDA9874A_AGCGR		0x00	/* AGC gain */
-#define TDA9874A_GCONR		0x01	/* general config */
-#define TDA9874A_MSR		0x02	/* monitor select */
-#define TDA9874A_C1FRA		0x03	/* carrier 1 freq. */
-#define TDA9874A_C1FRB		0x04	/* carrier 1 freq. */
-#define TDA9874A_C1FRC		0x05	/* carrier 1 freq. */
-#define TDA9874A_C2FRA		0x06	/* carrier 2 freq. */
-#define TDA9874A_C2FRB		0x07	/* carrier 2 freq. */
-#define TDA9874A_C2FRC		0x08	/* carrier 2 freq. */
-#define TDA9874A_DCR		0x09	/* demodulator config */
-#define TDA9874A_FMER		0x0a	/* FM de-emphasis */
-#define TDA9874A_FMMR		0x0b	/* FM dematrix */
-#define TDA9874A_C1OLAR		0x0c	/* ch.1 output level adj. */
-#define TDA9874A_C2OLAR		0x0d	/* ch.2 output level adj. */
-#define TDA9874A_NCONR		0x0e	/* NICAM config */
-#define TDA9874A_NOLAR		0x0f	/* NICAM output level adj. */
-#define TDA9874A_NLELR		0x10	/* NICAM lower error limit */
-#define TDA9874A_NUELR		0x11	/* NICAM upper error limit */
-#define TDA9874A_AMCONR		0x12	/* audio mute control */
-#define TDA9874A_SDACOSR	0x13	/* stereo DAC output select */
-#define TDA9874A_AOSR		0x14	/* analog output select */
-#define TDA9874A_DAICONR	0x15	/* digital audio interface config */
-#define TDA9874A_I2SOSR		0x16	/* I2S-bus output select */
-#define TDA9874A_I2SOLAR	0x17	/* I2S-bus output level adj. */
-#define TDA9874A_MDACOSR	0x18	/* mono DAC output select (tda9874a) */
-#define TDA9874A_ESP		0xFF	/* easy standard progr. (tda9874a) */
-
-/* Subaddresses for TDA9874H and TDA9874A (slave tx) */
-#define TDA9874A_DSR		0x00	/* device status */
-#define TDA9874A_NSR		0x01	/* NICAM status */
-#define TDA9874A_NECR		0x02	/* NICAM error count */
-#define TDA9874A_DR1		0x03	/* add. data LSB */
-#define TDA9874A_DR2		0x04	/* add. data MSB */
-#define TDA9874A_LLRA		0x05	/* monitor level read-out LSB */
-#define TDA9874A_LLRB		0x06	/* monitor level read-out MSB */
-#define TDA9874A_SIFLR		0x07	/* SIF level */
-#define TDA9874A_TR2		252	/* test reg. 2 */
-#define TDA9874A_TR1		253	/* test reg. 1 */
-#define TDA9874A_DIC		254	/* device id. code */
-#define TDA9874A_SIC		255	/* software id. code */
-
-
-static int tda9874a_mode = 1;		/* 0: A2, 1: NICAM */
-static int tda9874a_GCONR = 0xc0;	/* default config. input pin: SIFSEL=0 */
-static int tda9874a_NCONR = 0x01;	/* default NICAM config.: AMSEL=0,AMUTE=1 */
-static int tda9874a_ESP = 0x07;		/* default standard: NICAM D/K */
-static int tda9874a_dic = -1;		/* device id. code */
-
-/* insmod options for tda9874a */
-static unsigned int tda9874a_SIF   = UNSET;
-static unsigned int tda9874a_AMSEL = UNSET;
-static unsigned int tda9874a_STD   = UNSET;
-module_param(tda9874a_SIF, int, 0444);
-module_param(tda9874a_AMSEL, int, 0444);
-module_param(tda9874a_STD, int, 0444);
-
-/*
- * initialization table for tda9874 decoder:
- *  - carrier 1 freq. registers (3 bytes)
- *  - carrier 2 freq. registers (3 bytes)
- *  - demudulator config register
- *  - FM de-emphasis register (slow identification mode)
- * Note: frequency registers must be written in single i2c transfer.
- */
-static struct tda9874a_MODES {
-	char *name;
-	audiocmd cmd;
-} tda9874a_modelist[9] = {
-  {	"A2, B/G", /* default */
-	{ 9, { TDA9874A_C1FRA, 0x72,0x95,0x55, 0x77,0xA0,0x00, 0x00,0x00 }} },
-  {	"A2, M (Korea)",
-	{ 9, { TDA9874A_C1FRA, 0x5D,0xC0,0x00, 0x62,0x6A,0xAA, 0x20,0x22 }} },
-  {	"A2, D/K (1)",
-	{ 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x82,0x60,0x00, 0x00,0x00 }} },
-  {	"A2, D/K (2)",
-	{ 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x8C,0x75,0x55, 0x00,0x00 }} },
-  {	"A2, D/K (3)",
-	{ 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x77,0xA0,0x00, 0x00,0x00 }} },
-  {	"NICAM, I",
-	{ 9, { TDA9874A_C1FRA, 0x7D,0x00,0x00, 0x88,0x8A,0xAA, 0x08,0x33 }} },
-  {	"NICAM, B/G",
-	{ 9, { TDA9874A_C1FRA, 0x72,0x95,0x55, 0x79,0xEA,0xAA, 0x08,0x33 }} },
-  {	"NICAM, D/K",
-	{ 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x08,0x33 }} },
-  {	"NICAM, L",
-	{ 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x09,0x33 }} }
-};
-
-static int tda9874a_setup(struct CHIPSTATE *chip)
-{
-	struct v4l2_subdev *sd = &chip->sd;
-
-	chip_write(chip, TDA9874A_AGCGR, 0x00); /* 0 dB */
-	chip_write(chip, TDA9874A_GCONR, tda9874a_GCONR);
-	chip_write(chip, TDA9874A_MSR, (tda9874a_mode) ? 0x03:0x02);
-	if(tda9874a_dic == 0x11) {
-		chip_write(chip, TDA9874A_FMMR, 0x80);
-	} else { /* dic == 0x07 */
-		chip_cmd(chip,"tda9874_modelist",&tda9874a_modelist[tda9874a_STD].cmd);
-		chip_write(chip, TDA9874A_FMMR, 0x00);
-	}
-	chip_write(chip, TDA9874A_C1OLAR, 0x00); /* 0 dB */
-	chip_write(chip, TDA9874A_C2OLAR, 0x00); /* 0 dB */
-	chip_write(chip, TDA9874A_NCONR, tda9874a_NCONR);
-	chip_write(chip, TDA9874A_NOLAR, 0x00); /* 0 dB */
-	/* Note: If signal quality is poor you may want to change NICAM */
-	/* error limit registers (NLELR and NUELR) to some greater values. */
-	/* Then the sound would remain stereo, but won't be so clear. */
-	chip_write(chip, TDA9874A_NLELR, 0x14); /* default */
-	chip_write(chip, TDA9874A_NUELR, 0x50); /* default */
-
-	if(tda9874a_dic == 0x11) {
-		chip_write(chip, TDA9874A_AMCONR, 0xf9);
-		chip_write(chip, TDA9874A_SDACOSR, (tda9874a_mode) ? 0x81:0x80);
-		chip_write(chip, TDA9874A_AOSR, 0x80);
-		chip_write(chip, TDA9874A_MDACOSR, (tda9874a_mode) ? 0x82:0x80);
-		chip_write(chip, TDA9874A_ESP, tda9874a_ESP);
-	} else { /* dic == 0x07 */
-		chip_write(chip, TDA9874A_AMCONR, 0xfb);
-		chip_write(chip, TDA9874A_SDACOSR, (tda9874a_mode) ? 0x81:0x80);
-		chip_write(chip, TDA9874A_AOSR, 0x00); /* or 0x10 */
-	}
-	v4l2_dbg(1, debug, sd, "tda9874a_setup(): %s [0x%02X].\n",
-		tda9874a_modelist[tda9874a_STD].name,tda9874a_STD);
-	return 1;
-}
-
-static int tda9874a_getrxsubchans(struct CHIPSTATE *chip)
-{
-	struct v4l2_subdev *sd = &chip->sd;
-	int dsr,nsr,mode;
-	int necr; /* just for debugging */
-
-	mode = V4L2_TUNER_SUB_MONO;
-
-	if(-1 == (dsr = chip_read2(chip,TDA9874A_DSR)))
-		return mode;
-	if(-1 == (nsr = chip_read2(chip,TDA9874A_NSR)))
-		return mode;
-	if(-1 == (necr = chip_read2(chip,TDA9874A_NECR)))
-		return mode;
-
-	/* need to store dsr/nsr somewhere */
-	chip->shadow.bytes[MAXREGS-2] = dsr;
-	chip->shadow.bytes[MAXREGS-1] = nsr;
-
-	if(tda9874a_mode) {
-		/* Note: DSR.RSSF and DSR.AMSTAT bits are also checked.
-		 * If NICAM auto-muting is enabled, DSR.AMSTAT=1 indicates
-		 * that sound has (temporarily) switched from NICAM to
-		 * mono FM (or AM) on 1st sound carrier due to high NICAM bit
-		 * error count. So in fact there is no stereo in this case :-(
-		 * But changing the mode to V4L2_TUNER_MODE_MONO would switch
-		 * external 4052 multiplexer in audio_hook().
-		 */
-		if(nsr & 0x02) /* NSR.S/MB=1 */
-			mode = V4L2_TUNER_SUB_STEREO;
-		if(nsr & 0x01) /* NSR.D/SB=1 */
-			mode |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
-	} else {
-		if(dsr & 0x02) /* DSR.IDSTE=1 */
-			mode = V4L2_TUNER_SUB_STEREO;
-		if(dsr & 0x04) /* DSR.IDDUA=1 */
-			mode |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
-	}
-
-	v4l2_dbg(1, debug, sd,
-		 "tda9874a_getrxsubchans(): DSR=0x%X, NSR=0x%X, NECR=0x%X, return: %d.\n",
-		 dsr, nsr, necr, mode);
-	return mode;
-}
-
-static void tda9874a_setaudmode(struct CHIPSTATE *chip, int mode)
-{
-	struct v4l2_subdev *sd = &chip->sd;
-
-	/* Disable/enable NICAM auto-muting (based on DSR.RSSF status bit). */
-	/* If auto-muting is disabled, we can hear a signal of degrading quality. */
-	if (tda9874a_mode) {
-		if(chip->shadow.bytes[MAXREGS-2] & 0x20) /* DSR.RSSF=1 */
-			tda9874a_NCONR &= 0xfe; /* enable */
-		else
-			tda9874a_NCONR |= 0x01; /* disable */
-		chip_write(chip, TDA9874A_NCONR, tda9874a_NCONR);
-	}
-
-	/* Note: TDA9874A supports automatic FM dematrixing (FMMR register)
-	 * and has auto-select function for audio output (AOSR register).
-	 * Old TDA9874H doesn't support these features.
-	 * TDA9874A also has additional mono output pin (OUTM), which
-	 * on same (all?) tv-cards is not used, anyway (as well as MONOIN).
-	 */
-	if(tda9874a_dic == 0x11) {
-		int aosr = 0x80;
-		int mdacosr = (tda9874a_mode) ? 0x82:0x80;
-
-		switch(mode) {
-		case V4L2_TUNER_MODE_MONO:
-		case V4L2_TUNER_MODE_STEREO:
-			break;
-		case V4L2_TUNER_MODE_LANG1:
-			aosr = 0x80; /* auto-select, dual A/A */
-			mdacosr = (tda9874a_mode) ? 0x82:0x80;
-			break;
-		case V4L2_TUNER_MODE_LANG2:
-			aosr = 0xa0; /* auto-select, dual B/B */
-			mdacosr = (tda9874a_mode) ? 0x83:0x81;
-			break;
-		case V4L2_TUNER_MODE_LANG1_LANG2:
-			aosr = 0x00; /* always route L to L and R to R */
-			mdacosr = (tda9874a_mode) ? 0x82:0x80;
-			break;
-		default:
-			return;
-		}
-		chip_write(chip, TDA9874A_AOSR, aosr);
-		chip_write(chip, TDA9874A_MDACOSR, mdacosr);
-
-		v4l2_dbg(1, debug, sd,
-			"tda9874a_setaudmode(): req. mode %d; AOSR=0x%X, MDACOSR=0x%X.\n",
-			mode, aosr, mdacosr);
-
-	} else { /* dic == 0x07 */
-		int fmmr,aosr;
-
-		switch(mode) {
-		case V4L2_TUNER_MODE_MONO:
-			fmmr = 0x00; /* mono */
-			aosr = 0x10; /* A/A */
-			break;
-		case V4L2_TUNER_MODE_STEREO:
-			if(tda9874a_mode) {
-				fmmr = 0x00;
-				aosr = 0x00; /* handled by NICAM auto-mute */
-			} else {
-				fmmr = (tda9874a_ESP == 1) ? 0x05 : 0x04; /* stereo */
-				aosr = 0x00;
-			}
-			break;
-		case V4L2_TUNER_MODE_LANG1:
-			fmmr = 0x02; /* dual */
-			aosr = 0x10; /* dual A/A */
-			break;
-		case V4L2_TUNER_MODE_LANG2:
-			fmmr = 0x02; /* dual */
-			aosr = 0x20; /* dual B/B */
-			break;
-		case V4L2_TUNER_MODE_LANG1_LANG2:
-			fmmr = 0x02; /* dual */
-			aosr = 0x00; /* dual A/B */
-			break;
-		default:
-			return;
-		}
-		chip_write(chip, TDA9874A_FMMR, fmmr);
-		chip_write(chip, TDA9874A_AOSR, aosr);
-
-		v4l2_dbg(1, debug, sd,
-			"tda9874a_setaudmode(): req. mode %d; FMMR=0x%X, AOSR=0x%X.\n",
-			mode, fmmr, aosr);
-	}
-}
-
-static int tda9874a_checkit(struct CHIPSTATE *chip)
-{
-	struct v4l2_subdev *sd = &chip->sd;
-	int dic,sic;	/* device id. and software id. codes */
-
-	if(-1 == (dic = chip_read2(chip,TDA9874A_DIC)))
-		return 0;
-	if(-1 == (sic = chip_read2(chip,TDA9874A_SIC)))
-		return 0;
-
-	v4l2_dbg(1, debug, sd, "tda9874a_checkit(): DIC=0x%X, SIC=0x%X.\n", dic, sic);
-
-	if((dic == 0x11)||(dic == 0x07)) {
-		v4l2_info(sd, "found tda9874%s.\n", (dic == 0x11) ? "a" : "h");
-		tda9874a_dic = dic;	/* remember device id. */
-		return 1;
-	}
-	return 0;	/* not found */
-}
-
-static int tda9874a_initialize(struct CHIPSTATE *chip)
-{
-	if (tda9874a_SIF > 2)
-		tda9874a_SIF = 1;
-	if (tda9874a_STD >= ARRAY_SIZE(tda9874a_modelist))
-		tda9874a_STD = 0;
-	if(tda9874a_AMSEL > 1)
-		tda9874a_AMSEL = 0;
-
-	if(tda9874a_SIF == 1)
-		tda9874a_GCONR = 0xc0;	/* sound IF input 1 */
-	else
-		tda9874a_GCONR = 0xc1;	/* sound IF input 2 */
-
-	tda9874a_ESP = tda9874a_STD;
-	tda9874a_mode = (tda9874a_STD < 5) ? 0 : 1;
-
-	if(tda9874a_AMSEL == 0)
-		tda9874a_NCONR = 0x01; /* auto-mute: analog mono input */
-	else
-		tda9874a_NCONR = 0x05; /* auto-mute: 1st carrier FM or AM */
-
-	tda9874a_setup(chip);
-	return 0;
-}
-
-/* ---------------------------------------------------------------------- */
-/* audio chip description - defines+functions for tda9875                 */
-/* The TDA9875 is made by Philips Semiconductor
- * http://www.semiconductors.philips.com
- * TDA9875: I2C-bus controlled DSP audio processor, FM demodulator
- *
- */
-
-/* subaddresses for TDA9875 */
-#define TDA9875_MUT         0x12  /*General mute  (value --> 0b11001100*/
-#define TDA9875_CFG         0x01  /* Config register (value --> 0b00000000 */
-#define TDA9875_DACOS       0x13  /*DAC i/o select (ADC) 0b0000100*/
-#define TDA9875_LOSR        0x16  /*Line output select regirter 0b0100 0001*/
-
-#define TDA9875_CH1V        0x0c  /*Channel 1 volume (mute)*/
-#define TDA9875_CH2V        0x0d  /*Channel 2 volume (mute)*/
-#define TDA9875_SC1         0x14  /*SCART 1 in (mono)*/
-#define TDA9875_SC2         0x15  /*SCART 2 in (mono)*/
-
-#define TDA9875_ADCIS       0x17  /*ADC input select (mono) 0b0110 000*/
-#define TDA9875_AER         0x19  /*Audio effect (AVL+Pseudo) 0b0000 0110*/
-#define TDA9875_MCS         0x18  /*Main channel select (DAC) 0b0000100*/
-#define TDA9875_MVL         0x1a  /* Main volume gauche */
-#define TDA9875_MVR         0x1b  /* Main volume droite */
-#define TDA9875_MBA         0x1d  /* Main Basse */
-#define TDA9875_MTR         0x1e  /* Main treble */
-#define TDA9875_ACS         0x1f  /* Auxiliary channel select (FM) 0b0000000*/
-#define TDA9875_AVL         0x20  /* Auxiliary volume gauche */
-#define TDA9875_AVR         0x21  /* Auxiliary volume droite */
-#define TDA9875_ABA         0x22  /* Auxiliary Basse */
-#define TDA9875_ATR         0x23  /* Auxiliary treble */
-
-#define TDA9875_MSR         0x02  /* Monitor select register */
-#define TDA9875_C1MSB       0x03  /* Carrier 1 (FM) frequency register MSB */
-#define TDA9875_C1MIB       0x04  /* Carrier 1 (FM) frequency register (16-8]b */
-#define TDA9875_C1LSB       0x05  /* Carrier 1 (FM) frequency register LSB */
-#define TDA9875_C2MSB       0x06  /* Carrier 2 (nicam) frequency register MSB */
-#define TDA9875_C2MIB       0x07  /* Carrier 2 (nicam) frequency register (16-8]b */
-#define TDA9875_C2LSB       0x08  /* Carrier 2 (nicam) frequency register LSB */
-#define TDA9875_DCR         0x09  /* Demodulateur configuration regirter*/
-#define TDA9875_DEEM        0x0a  /* FM de-emphasis regirter*/
-#define TDA9875_FMAT        0x0b  /* FM Matrix regirter*/
-
-/* values */
-#define TDA9875_MUTE_ON	    0xff /* general mute */
-#define TDA9875_MUTE_OFF    0xcc /* general no mute */
-
-static int tda9875_initialize(struct CHIPSTATE *chip)
-{
-	chip_write(chip, TDA9875_CFG, 0xd0); /*reg de config 0 (reset)*/
-	chip_write(chip, TDA9875_MSR, 0x03);    /* Monitor 0b00000XXX*/
-	chip_write(chip, TDA9875_C1MSB, 0x00);  /*Car1(FM) MSB XMHz*/
-	chip_write(chip, TDA9875_C1MIB, 0x00);  /*Car1(FM) MIB XMHz*/
-	chip_write(chip, TDA9875_C1LSB, 0x00);  /*Car1(FM) LSB XMHz*/
-	chip_write(chip, TDA9875_C2MSB, 0x00);  /*Car2(NICAM) MSB XMHz*/
-	chip_write(chip, TDA9875_C2MIB, 0x00);  /*Car2(NICAM) MIB XMHz*/
-	chip_write(chip, TDA9875_C2LSB, 0x00);  /*Car2(NICAM) LSB XMHz*/
-	chip_write(chip, TDA9875_DCR, 0x00);    /*Demod config 0x00*/
-	chip_write(chip, TDA9875_DEEM, 0x44);   /*DE-Emph 0b0100 0100*/
-	chip_write(chip, TDA9875_FMAT, 0x00);   /*FM Matrix reg 0x00*/
-	chip_write(chip, TDA9875_SC1, 0x00);    /* SCART 1 (SC1)*/
-	chip_write(chip, TDA9875_SC2, 0x01);    /* SCART 2 (sc2)*/
-
-	chip_write(chip, TDA9875_CH1V, 0x10);  /* Channel volume 1 mute*/
-	chip_write(chip, TDA9875_CH2V, 0x10);  /* Channel volume 2 mute */
-	chip_write(chip, TDA9875_DACOS, 0x02); /* sig DAC i/o(in:nicam)*/
-	chip_write(chip, TDA9875_ADCIS, 0x6f); /* sig ADC input(in:mono)*/
-	chip_write(chip, TDA9875_LOSR, 0x00);  /* line out (in:mono)*/
-	chip_write(chip, TDA9875_AER, 0x00);   /*06 Effect (AVL+PSEUDO) */
-	chip_write(chip, TDA9875_MCS, 0x44);   /* Main ch select (DAC) */
-	chip_write(chip, TDA9875_MVL, 0x03);   /* Vol Main left 10dB */
-	chip_write(chip, TDA9875_MVR, 0x03);   /* Vol Main right 10dB*/
-	chip_write(chip, TDA9875_MBA, 0x00);   /* Main Bass Main 0dB*/
-	chip_write(chip, TDA9875_MTR, 0x00);   /* Main Treble Main 0dB*/
-	chip_write(chip, TDA9875_ACS, 0x44);   /* Aux chan select (dac)*/
-	chip_write(chip, TDA9875_AVL, 0x00);   /* Vol Aux left 0dB*/
-	chip_write(chip, TDA9875_AVR, 0x00);   /* Vol Aux right 0dB*/
-	chip_write(chip, TDA9875_ABA, 0x00);   /* Aux Bass Main 0dB*/
-	chip_write(chip, TDA9875_ATR, 0x00);   /* Aux Aigus Main 0dB*/
-
-	chip_write(chip, TDA9875_MUT, 0xcc);   /* General mute  */
-	return 0;
-}
-
-static int tda9875_volume(int val) { return (unsigned char)(val / 602 - 84); }
-static int tda9875_bass(int val) { return (unsigned char)(max(-12, val / 2115 - 15)); }
-static int tda9875_treble(int val) { return (unsigned char)(val / 2622 - 12); }
-
-/* ----------------------------------------------------------------------- */
-
-
-/* *********************** *
- * i2c interface functions *
- * *********************** */
-
-static int tda9875_checkit(struct CHIPSTATE *chip)
-{
-	struct v4l2_subdev *sd = &chip->sd;
-	int dic, rev;
-
-	dic = chip_read2(chip, 254);
-	rev = chip_read2(chip, 255);
-
-	if (dic == 0 || dic == 2) { /* tda9875 and tda9875A */
-		v4l2_info(sd, "found tda9875%s rev. %d.\n",
-			dic == 0 ? "" : "A", rev);
-		return 1;
-	}
-	return 0;
-}
-
-/* ---------------------------------------------------------------------- */
-/* audio chip descriptions - defines+functions for tea6420                */
-
-#define TEA6300_VL         0x00  /* volume left */
-#define TEA6300_VR         0x01  /* volume right */
-#define TEA6300_BA         0x02  /* bass */
-#define TEA6300_TR         0x03  /* treble */
-#define TEA6300_FA         0x04  /* fader control */
-#define TEA6300_S          0x05  /* switch register */
-				 /* values for those registers: */
-#define TEA6300_S_SA       0x01  /* stereo A input */
-#define TEA6300_S_SB       0x02  /* stereo B */
-#define TEA6300_S_SC       0x04  /* stereo C */
-#define TEA6300_S_GMU      0x80  /* general mute */
-
-#define TEA6320_V          0x00  /* volume (0-5)/loudness off (6)/zero crossing mute(7) */
-#define TEA6320_FFR        0x01  /* fader front right (0-5) */
-#define TEA6320_FFL        0x02  /* fader front left (0-5) */
-#define TEA6320_FRR        0x03  /* fader rear right (0-5) */
-#define TEA6320_FRL        0x04  /* fader rear left (0-5) */
-#define TEA6320_BA         0x05  /* bass (0-4) */
-#define TEA6320_TR         0x06  /* treble (0-4) */
-#define TEA6320_S          0x07  /* switch register */
-				 /* values for those registers: */
-#define TEA6320_S_SA       0x07  /* stereo A input */
-#define TEA6320_S_SB       0x06  /* stereo B */
-#define TEA6320_S_SC       0x05  /* stereo C */
-#define TEA6320_S_SD       0x04  /* stereo D */
-#define TEA6320_S_GMU      0x80  /* general mute */
-
-#define TEA6420_S_SA       0x00  /* stereo A input */
-#define TEA6420_S_SB       0x01  /* stereo B */
-#define TEA6420_S_SC       0x02  /* stereo C */
-#define TEA6420_S_SD       0x03  /* stereo D */
-#define TEA6420_S_SE       0x04  /* stereo E */
-#define TEA6420_S_GMU      0x05  /* general mute */
-
-static int tea6300_shift10(int val) { return val >> 10; }
-static int tea6300_shift12(int val) { return val >> 12; }
-
-/* Assumes 16bit input (values 0x3f to 0x0c are unique, values less than */
-/* 0x0c mirror those immediately higher) */
-static int tea6320_volume(int val) { return (val / (65535/(63-12)) + 12) & 0x3f; }
-static int tea6320_shift11(int val) { return val >> 11; }
-static int tea6320_initialize(struct CHIPSTATE * chip)
-{
-	chip_write(chip, TEA6320_FFR, 0x3f);
-	chip_write(chip, TEA6320_FFL, 0x3f);
-	chip_write(chip, TEA6320_FRR, 0x3f);
-	chip_write(chip, TEA6320_FRL, 0x3f);
-
-	return 0;
-}
-
-
-/* ---------------------------------------------------------------------- */
-/* audio chip descriptions - defines+functions for tda8425                */
-
-#define TDA8425_VL         0x00  /* volume left */
-#define TDA8425_VR         0x01  /* volume right */
-#define TDA8425_BA         0x02  /* bass */
-#define TDA8425_TR         0x03  /* treble */
-#define TDA8425_S1         0x08  /* switch functions */
-				 /* values for those registers: */
-#define TDA8425_S1_OFF     0xEE  /* audio off (mute on) */
-#define TDA8425_S1_CH1     0xCE  /* audio channel 1 (mute off) - "linear stereo" mode */
-#define TDA8425_S1_CH2     0xCF  /* audio channel 2 (mute off) - "linear stereo" mode */
-#define TDA8425_S1_MU      0x20  /* mute bit */
-#define TDA8425_S1_STEREO  0x18  /* stereo bits */
-#define TDA8425_S1_STEREO_SPATIAL 0x18 /* spatial stereo */
-#define TDA8425_S1_STEREO_LINEAR  0x08 /* linear stereo */
-#define TDA8425_S1_STEREO_PSEUDO  0x10 /* pseudo stereo */
-#define TDA8425_S1_STEREO_MONO    0x00 /* forced mono */
-#define TDA8425_S1_ML      0x06        /* language selector */
-#define TDA8425_S1_ML_SOUND_A 0x02     /* sound a */
-#define TDA8425_S1_ML_SOUND_B 0x04     /* sound b */
-#define TDA8425_S1_ML_STEREO  0x06     /* stereo */
-#define TDA8425_S1_IS      0x01        /* channel selector */
-
-
-static int tda8425_shift10(int val) { return (val >> 10) | 0xc0; }
-static int tda8425_shift12(int val) { return (val >> 12) | 0xf0; }
-
-static void tda8425_setaudmode(struct CHIPSTATE *chip, int mode)
-{
-	int s1 = chip->shadow.bytes[TDA8425_S1+1] & 0xe1;
-
-	switch (mode) {
-	case V4L2_TUNER_MODE_LANG1:
-		s1 |= TDA8425_S1_ML_SOUND_A;
-		s1 |= TDA8425_S1_STEREO_PSEUDO;
-		break;
-	case V4L2_TUNER_MODE_LANG2:
-		s1 |= TDA8425_S1_ML_SOUND_B;
-		s1 |= TDA8425_S1_STEREO_PSEUDO;
-		break;
-	case V4L2_TUNER_MODE_LANG1_LANG2:
-		s1 |= TDA8425_S1_ML_STEREO;
-		s1 |= TDA8425_S1_STEREO_LINEAR;
-		break;
-	case V4L2_TUNER_MODE_MONO:
-		s1 |= TDA8425_S1_ML_STEREO;
-		s1 |= TDA8425_S1_STEREO_MONO;
-		break;
-	case V4L2_TUNER_MODE_STEREO:
-		s1 |= TDA8425_S1_ML_STEREO;
-		s1 |= TDA8425_S1_STEREO_SPATIAL;
-		break;
-	default:
-		return;
-	}
-	chip_write(chip,TDA8425_S1,s1);
-}
-
-
-/* ---------------------------------------------------------------------- */
-/* audio chip descriptions - defines+functions for pic16c54 (PV951)       */
-
-/* the registers of 16C54, I2C sub address. */
-#define PIC16C54_REG_KEY_CODE     0x01	       /* Not use. */
-#define PIC16C54_REG_MISC         0x02
-
-/* bit definition of the RESET register, I2C data. */
-#define PIC16C54_MISC_RESET_REMOTE_CTL 0x01 /* bit 0, Reset to receive the key */
-					    /*        code of remote controller */
-#define PIC16C54_MISC_MTS_MAIN         0x02 /* bit 1 */
-#define PIC16C54_MISC_MTS_SAP          0x04 /* bit 2 */
-#define PIC16C54_MISC_MTS_BOTH         0x08 /* bit 3 */
-#define PIC16C54_MISC_SND_MUTE         0x10 /* bit 4, Mute Audio(Line-in and Tuner) */
-#define PIC16C54_MISC_SND_NOTMUTE      0x20 /* bit 5 */
-#define PIC16C54_MISC_SWITCH_TUNER     0x40 /* bit 6	, Switch to Line-in */
-#define PIC16C54_MISC_SWITCH_LINE      0x80 /* bit 7	, Switch to Tuner */
-
-/* ---------------------------------------------------------------------- */
-/* audio chip descriptions - defines+functions for TA8874Z                */
-
-/* write 1st byte */
-#define TA8874Z_LED_STE	0x80
-#define TA8874Z_LED_BIL	0x40
-#define TA8874Z_LED_EXT	0x20
-#define TA8874Z_MONO_SET	0x10
-#define TA8874Z_MUTE	0x08
-#define TA8874Z_F_MONO	0x04
-#define TA8874Z_MODE_SUB	0x02
-#define TA8874Z_MODE_MAIN	0x01
-
-/* write 2nd byte */
-/*#define TA8874Z_TI	0x80  */ /* test mode */
-#define TA8874Z_SEPARATION	0x3f
-#define TA8874Z_SEPARATION_DEFAULT	0x10
-
-/* read */
-#define TA8874Z_B1	0x80
-#define TA8874Z_B0	0x40
-#define TA8874Z_CHAG_FLAG	0x20
-
-/*
- *        B1 B0
- * mono    L  H
- * stereo  L  L
- * BIL     H  L
- */
-static int ta8874z_getrxsubchans(struct CHIPSTATE *chip)
-{
-	int val, mode;
-
-	val = chip_read(chip);
-	mode = V4L2_TUNER_SUB_MONO;
-	if (val & TA8874Z_B1){
-		mode |= V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
-	}else if (!(val & TA8874Z_B0)){
-		mode = V4L2_TUNER_SUB_STEREO;
-	}
-	/* v4l2_dbg(1, debug, &chip->sd,
-		 "ta8874z_getrxsubchans(): raw chip read: 0x%02x, return: 0x%02x\n",
-		 val, mode); */
-	return mode;
-}
-
-static audiocmd ta8874z_stereo = { 2, {0, TA8874Z_SEPARATION_DEFAULT}};
-static audiocmd ta8874z_mono = {2, { TA8874Z_MONO_SET, TA8874Z_SEPARATION_DEFAULT}};
-static audiocmd ta8874z_main = {2, { 0, TA8874Z_SEPARATION_DEFAULT}};
-static audiocmd ta8874z_sub = {2, { TA8874Z_MODE_SUB, TA8874Z_SEPARATION_DEFAULT}};
-static audiocmd ta8874z_both = {2, { TA8874Z_MODE_MAIN | TA8874Z_MODE_SUB, TA8874Z_SEPARATION_DEFAULT}};
-
-static void ta8874z_setaudmode(struct CHIPSTATE *chip, int mode)
-{
-	struct v4l2_subdev *sd = &chip->sd;
-	int update = 1;
-	audiocmd *t = NULL;
-
-	v4l2_dbg(1, debug, sd, "ta8874z_setaudmode(): mode: 0x%02x\n", mode);
-
-	switch(mode){
-	case V4L2_TUNER_MODE_MONO:
-		t = &ta8874z_mono;
-		break;
-	case V4L2_TUNER_MODE_STEREO:
-		t = &ta8874z_stereo;
-		break;
-	case V4L2_TUNER_MODE_LANG1:
-		t = &ta8874z_main;
-		break;
-	case V4L2_TUNER_MODE_LANG2:
-		t = &ta8874z_sub;
-		break;
-	case V4L2_TUNER_MODE_LANG1_LANG2:
-		t = &ta8874z_both;
-		break;
-	default:
-		update = 0;
-	}
-
-	if(update)
-		chip_cmd(chip, "TA8874Z", t);
-}
-
-static int ta8874z_checkit(struct CHIPSTATE *chip)
-{
-	int rc;
-	rc = chip_read(chip);
-	return ((rc & 0x1f) == 0x1f) ? 1 : 0;
-}
-
-/* ---------------------------------------------------------------------- */
-/* audio chip descriptions - struct CHIPDESC                              */
-
-/* insmod options to enable/disable individual audio chips */
-static int tda8425  = 1;
-static int tda9840  = 1;
-static int tda9850  = 1;
-static int tda9855  = 1;
-static int tda9873  = 1;
-static int tda9874a = 1;
-static int tda9875  = 1;
-static int tea6300;	/* default 0 - address clash with msp34xx */
-static int tea6320;	/* default 0 - address clash with msp34xx */
-static int tea6420  = 1;
-static int pic16c54 = 1;
-static int ta8874z;	/* default 0 - address clash with tda9840 */
-
-module_param(tda8425, int, 0444);
-module_param(tda9840, int, 0444);
-module_param(tda9850, int, 0444);
-module_param(tda9855, int, 0444);
-module_param(tda9873, int, 0444);
-module_param(tda9874a, int, 0444);
-module_param(tda9875, int, 0444);
-module_param(tea6300, int, 0444);
-module_param(tea6320, int, 0444);
-module_param(tea6420, int, 0444);
-module_param(pic16c54, int, 0444);
-module_param(ta8874z, int, 0444);
-
-static struct CHIPDESC chiplist[] = {
-	{
-		.name       = "tda9840",
-		.insmodopt  = &tda9840,
-		.addr_lo    = I2C_ADDR_TDA9840 >> 1,
-		.addr_hi    = I2C_ADDR_TDA9840 >> 1,
-		.registers  = 5,
-		.flags      = CHIP_NEED_CHECKMODE,
-
-		/* callbacks */
-		.checkit    = tda9840_checkit,
-		.getrxsubchans = tda9840_getrxsubchans,
-		.setaudmode = tda9840_setaudmode,
-
-		.init       = { 2, { TDA9840_TEST, TDA9840_TEST_INT1SN
-				/* ,TDA9840_SW, TDA9840_MONO */} }
-	},
-	{
-		.name       = "tda9873h",
-		.insmodopt  = &tda9873,
-		.addr_lo    = I2C_ADDR_TDA985x_L >> 1,
-		.addr_hi    = I2C_ADDR_TDA985x_H >> 1,
-		.registers  = 3,
-		.flags      = CHIP_HAS_INPUTSEL | CHIP_NEED_CHECKMODE,
-
-		/* callbacks */
-		.checkit    = tda9873_checkit,
-		.getrxsubchans = tda9873_getrxsubchans,
-		.setaudmode = tda9873_setaudmode,
-
-		.init       = { 4, { TDA9873_SW, 0xa4, 0x06, 0x03 } },
-		.inputreg   = TDA9873_SW,
-		.inputmute  = TDA9873_MUTE | TDA9873_AUTOMUTE,
-		.inputmap   = {0xa0, 0xa2, 0xa0, 0xa0},
-		.inputmask  = TDA9873_INP_MASK|TDA9873_MUTE|TDA9873_AUTOMUTE,
-
-	},
-	{
-		.name       = "tda9874h/a",
-		.insmodopt  = &tda9874a,
-		.addr_lo    = I2C_ADDR_TDA9874 >> 1,
-		.addr_hi    = I2C_ADDR_TDA9874 >> 1,
-		.flags      = CHIP_NEED_CHECKMODE,
-
-		/* callbacks */
-		.initialize = tda9874a_initialize,
-		.checkit    = tda9874a_checkit,
-		.getrxsubchans = tda9874a_getrxsubchans,
-		.setaudmode = tda9874a_setaudmode,
-	},
-	{
-		.name       = "tda9875",
-		.insmodopt  = &tda9875,
-		.addr_lo    = I2C_ADDR_TDA9875 >> 1,
-		.addr_hi    = I2C_ADDR_TDA9875 >> 1,
-		.flags      = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE,
-
-		/* callbacks */
-		.initialize = tda9875_initialize,
-		.checkit    = tda9875_checkit,
-		.volfunc    = tda9875_volume,
-		.bassfunc   = tda9875_bass,
-		.treblefunc = tda9875_treble,
-		.leftreg    = TDA9875_MVL,
-		.rightreg   = TDA9875_MVR,
-		.bassreg    = TDA9875_MBA,
-		.treblereg  = TDA9875_MTR,
-		.leftinit   = 58880,
-		.rightinit  = 58880,
-	},
-	{
-		.name       = "tda9850",
-		.insmodopt  = &tda9850,
-		.addr_lo    = I2C_ADDR_TDA985x_L >> 1,
-		.addr_hi    = I2C_ADDR_TDA985x_H >> 1,
-		.registers  = 11,
-
-		.getrxsubchans = tda985x_getrxsubchans,
-		.setaudmode = tda985x_setaudmode,
-
-		.init       = { 8, { TDA9850_C4, 0x08, 0x08, TDA985x_STEREO, 0x07, 0x10, 0x10, 0x03 } }
-	},
-	{
-		.name       = "tda9855",
-		.insmodopt  = &tda9855,
-		.addr_lo    = I2C_ADDR_TDA985x_L >> 1,
-		.addr_hi    = I2C_ADDR_TDA985x_H >> 1,
-		.registers  = 11,
-		.flags      = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE,
-
-		.leftreg    = TDA9855_VL,
-		.rightreg   = TDA9855_VR,
-		.bassreg    = TDA9855_BA,
-		.treblereg  = TDA9855_TR,
-
-		/* callbacks */
-		.volfunc    = tda9855_volume,
-		.bassfunc   = tda9855_bass,
-		.treblefunc = tda9855_treble,
-		.getrxsubchans = tda985x_getrxsubchans,
-		.setaudmode = tda985x_setaudmode,
-
-		.init       = { 12, { 0, 0x6f, 0x6f, 0x0e, 0x07<<1, 0x8<<2,
-				    TDA9855_MUTE | TDA9855_AVL | TDA9855_LOUD | TDA9855_INT,
-				    TDA985x_STEREO | TDA9855_LINEAR | TDA9855_TZCM | TDA9855_VZCM,
-				    0x07, 0x10, 0x10, 0x03 }}
-	},
-	{
-		.name       = "tea6300",
-		.insmodopt  = &tea6300,
-		.addr_lo    = I2C_ADDR_TEA6300 >> 1,
-		.addr_hi    = I2C_ADDR_TEA6300 >> 1,
-		.registers  = 6,
-		.flags      = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL,
-
-		.leftreg    = TEA6300_VR,
-		.rightreg   = TEA6300_VL,
-		.bassreg    = TEA6300_BA,
-		.treblereg  = TEA6300_TR,
-
-		/* callbacks */
-		.volfunc    = tea6300_shift10,
-		.bassfunc   = tea6300_shift12,
-		.treblefunc = tea6300_shift12,
-
-		.inputreg   = TEA6300_S,
-		.inputmap   = { TEA6300_S_SA, TEA6300_S_SB, TEA6300_S_SC },
-		.inputmute  = TEA6300_S_GMU,
-	},
-	{
-		.name       = "tea6320",
-		.insmodopt  = &tea6320,
-		.addr_lo    = I2C_ADDR_TEA6300 >> 1,
-		.addr_hi    = I2C_ADDR_TEA6300 >> 1,
-		.registers  = 8,
-		.flags      = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL,
-
-		.leftreg    = TEA6320_V,
-		.rightreg   = TEA6320_V,
-		.bassreg    = TEA6320_BA,
-		.treblereg  = TEA6320_TR,
-
-		/* callbacks */
-		.initialize = tea6320_initialize,
-		.volfunc    = tea6320_volume,
-		.bassfunc   = tea6320_shift11,
-		.treblefunc = tea6320_shift11,
-
-		.inputreg   = TEA6320_S,
-		.inputmap   = { TEA6320_S_SA, TEA6420_S_SB, TEA6300_S_SC, TEA6320_S_SD },
-		.inputmute  = TEA6300_S_GMU,
-	},
-	{
-		.name       = "tea6420",
-		.insmodopt  = &tea6420,
-		.addr_lo    = I2C_ADDR_TEA6420 >> 1,
-		.addr_hi    = I2C_ADDR_TEA6420 >> 1,
-		.registers  = 1,
-		.flags      = CHIP_HAS_INPUTSEL,
-
-		.inputreg   = -1,
-		.inputmap   = { TEA6420_S_SA, TEA6420_S_SB, TEA6420_S_SC },
-		.inputmute  = TEA6300_S_GMU,
-	},
-	{
-		.name       = "tda8425",
-		.insmodopt  = &tda8425,
-		.addr_lo    = I2C_ADDR_TDA8425 >> 1,
-		.addr_hi    = I2C_ADDR_TDA8425 >> 1,
-		.registers  = 9,
-		.flags      = CHIP_HAS_VOLUME | CHIP_HAS_BASSTREBLE | CHIP_HAS_INPUTSEL,
-
-		.leftreg    = TDA8425_VL,
-		.rightreg   = TDA8425_VR,
-		.bassreg    = TDA8425_BA,
-		.treblereg  = TDA8425_TR,
-
-		/* callbacks */
-		.volfunc    = tda8425_shift10,
-		.bassfunc   = tda8425_shift12,
-		.treblefunc = tda8425_shift12,
-		.setaudmode = tda8425_setaudmode,
-
-		.inputreg   = TDA8425_S1,
-		.inputmap   = { TDA8425_S1_CH1, TDA8425_S1_CH1, TDA8425_S1_CH1 },
-		.inputmute  = TDA8425_S1_OFF,
-
-	},
-	{
-		.name       = "pic16c54 (PV951)",
-		.insmodopt  = &pic16c54,
-		.addr_lo    = I2C_ADDR_PIC16C54 >> 1,
-		.addr_hi    = I2C_ADDR_PIC16C54>> 1,
-		.registers  = 2,
-		.flags      = CHIP_HAS_INPUTSEL,
-
-		.inputreg   = PIC16C54_REG_MISC,
-		.inputmap   = {PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_TUNER,
-			     PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_LINE,
-			     PIC16C54_MISC_SND_NOTMUTE|PIC16C54_MISC_SWITCH_LINE,
-			     PIC16C54_MISC_SND_MUTE},
-		.inputmute  = PIC16C54_MISC_SND_MUTE,
-	},
-	{
-		.name       = "ta8874z",
-		.checkit    = ta8874z_checkit,
-		.insmodopt  = &ta8874z,
-		.addr_lo    = I2C_ADDR_TDA9840 >> 1,
-		.addr_hi    = I2C_ADDR_TDA9840 >> 1,
-		.registers  = 2,
-
-		/* callbacks */
-		.getrxsubchans = ta8874z_getrxsubchans,
-		.setaudmode = ta8874z_setaudmode,
-
-		.init       = {2, { TA8874Z_MONO_SET, TA8874Z_SEPARATION_DEFAULT}},
-	},
-	{ .name = NULL } /* EOF */
-};
-
-
-/* ---------------------------------------------------------------------- */
-
-static int tvaudio_g_ctrl(struct v4l2_subdev *sd,
-			    struct v4l2_control *ctrl)
-{
-	struct CHIPSTATE *chip = to_state(sd);
-	struct CHIPDESC *desc = chip->desc;
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		if (!(desc->flags & CHIP_HAS_INPUTSEL))
-			break;
-		ctrl->value=chip->muted;
-		return 0;
-	case V4L2_CID_AUDIO_VOLUME:
-		if (!(desc->flags & CHIP_HAS_VOLUME))
-			break;
-		ctrl->value = max(chip->left,chip->right);
-		return 0;
-	case V4L2_CID_AUDIO_BALANCE:
-	{
-		int volume;
-		if (!(desc->flags & CHIP_HAS_VOLUME))
-			break;
-		volume = max(chip->left,chip->right);
-		if (volume)
-			ctrl->value=(32768*min(chip->left,chip->right))/volume;
-		else
-			ctrl->value=32768;
-		return 0;
-	}
-	case V4L2_CID_AUDIO_BASS:
-		if (!(desc->flags & CHIP_HAS_BASSTREBLE))
-			break;
-		ctrl->value = chip->bass;
-		return 0;
-	case V4L2_CID_AUDIO_TREBLE:
-		if (!(desc->flags & CHIP_HAS_BASSTREBLE))
-			break;
-		ctrl->value = chip->treble;
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static int tvaudio_s_ctrl(struct v4l2_subdev *sd,
-			    struct v4l2_control *ctrl)
-{
-	struct CHIPSTATE *chip = to_state(sd);
-	struct CHIPDESC *desc = chip->desc;
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		if (!(desc->flags & CHIP_HAS_INPUTSEL))
-			break;
-
-		if (ctrl->value < 0 || ctrl->value >= 2)
-			return -ERANGE;
-		chip->muted = ctrl->value;
-		if (chip->muted)
-			chip_write_masked(chip,desc->inputreg,desc->inputmute,desc->inputmask);
-		else
-			chip_write_masked(chip,desc->inputreg,
-					desc->inputmap[chip->input],desc->inputmask);
-		return 0;
-	case V4L2_CID_AUDIO_VOLUME:
-	{
-		int volume,balance;
-
-		if (!(desc->flags & CHIP_HAS_VOLUME))
-			break;
-
-		volume = max(chip->left,chip->right);
-		if (volume)
-			balance=(32768*min(chip->left,chip->right))/volume;
-		else
-			balance=32768;
-
-		volume=ctrl->value;
-		chip->left = (min(65536 - balance,32768) * volume) / 32768;
-		chip->right = (min(balance,volume *(__u16)32768)) / 32768;
-
-		chip_write(chip,desc->leftreg,desc->volfunc(chip->left));
-		chip_write(chip,desc->rightreg,desc->volfunc(chip->right));
-
-		return 0;
-	}
-	case V4L2_CID_AUDIO_BALANCE:
-	{
-		int volume, balance;
-
-		if (!(desc->flags & CHIP_HAS_VOLUME))
-			break;
-
-		volume = max(chip->left, chip->right);
-		balance = ctrl->value;
-		chip->left = (min(65536 - balance, 32768) * volume) / 32768;
-		chip->right = (min(balance, volume * (__u16)32768)) / 32768;
-
-		chip_write(chip, desc->leftreg, desc->volfunc(chip->left));
-		chip_write(chip, desc->rightreg, desc->volfunc(chip->right));
-
-		return 0;
-	}
-	case V4L2_CID_AUDIO_BASS:
-		if (!(desc->flags & CHIP_HAS_BASSTREBLE))
-			break;
-		chip->bass = ctrl->value;
-		chip_write(chip,desc->bassreg,desc->bassfunc(chip->bass));
-
-		return 0;
-	case V4L2_CID_AUDIO_TREBLE:
-		if (!(desc->flags & CHIP_HAS_BASSTREBLE))
-			break;
-		chip->treble = ctrl->value;
-		chip_write(chip,desc->treblereg,desc->treblefunc(chip->treble));
-
-		return 0;
-	}
-	return -EINVAL;
-}
-
-
-/* ---------------------------------------------------------------------- */
-/* video4linux interface                                                  */
-
-static int tvaudio_s_radio(struct v4l2_subdev *sd)
-{
-	struct CHIPSTATE *chip = to_state(sd);
-
-	chip->radio = 1;
-	/* del_timer(&chip->wt); */
-	return 0;
-}
-
-static int tvaudio_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
-	struct CHIPSTATE *chip = to_state(sd);
-	struct CHIPDESC *desc = chip->desc;
-
-	switch (qc->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		if (desc->flags & CHIP_HAS_INPUTSEL)
-			return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
-		break;
-	case V4L2_CID_AUDIO_VOLUME:
-		if (desc->flags & CHIP_HAS_VOLUME)
-			return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 58880);
-		break;
-	case V4L2_CID_AUDIO_BALANCE:
-		if (desc->flags & CHIP_HAS_VOLUME)
-			return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 32768);
-		break;
-	case V4L2_CID_AUDIO_BASS:
-	case V4L2_CID_AUDIO_TREBLE:
-		if (desc->flags & CHIP_HAS_BASSTREBLE)
-			return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 32768);
-		break;
-	default:
-		break;
-	}
-	return -EINVAL;
-}
-
-static int tvaudio_s_routing(struct v4l2_subdev *sd,
-			     u32 input, u32 output, u32 config)
-{
-	struct CHIPSTATE *chip = to_state(sd);
-	struct CHIPDESC *desc = chip->desc;
-
-	if (!(desc->flags & CHIP_HAS_INPUTSEL))
-		return 0;
-	if (input >= 4)
-		return -EINVAL;
-	/* There are four inputs: tuner, radio, extern and intern. */
-	chip->input = input;
-	if (chip->muted)
-		return 0;
-	chip_write_masked(chip, desc->inputreg,
-			desc->inputmap[chip->input], desc->inputmask);
-	return 0;
-}
-
-static int tvaudio_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
-{
-	struct CHIPSTATE *chip = to_state(sd);
-	struct CHIPDESC *desc = chip->desc;
-
-	if (!desc->setaudmode)
-		return 0;
-	if (chip->radio)
-		return 0;
-
-	switch (vt->audmode) {
-	case V4L2_TUNER_MODE_MONO:
-	case V4L2_TUNER_MODE_STEREO:
-	case V4L2_TUNER_MODE_LANG1:
-	case V4L2_TUNER_MODE_LANG2:
-	case V4L2_TUNER_MODE_LANG1_LANG2:
-		break;
-	default:
-		return -EINVAL;
-	}
-	chip->audmode = vt->audmode;
-
-	if (chip->thread)
-		wake_up_process(chip->thread);
-	else
-		desc->setaudmode(chip, vt->audmode);
-
-	return 0;
-}
-
-static int tvaudio_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
-{
-	struct CHIPSTATE *chip = to_state(sd);
-	struct CHIPDESC *desc = chip->desc;
-
-	if (!desc->getrxsubchans)
-		return 0;
-	if (chip->radio)
-		return 0;
-
-	vt->audmode = chip->audmode;
-	vt->rxsubchans = desc->getrxsubchans(chip);
-	vt->capability = V4L2_TUNER_CAP_STEREO |
-		V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2;
-
-	return 0;
-}
-
-static int tvaudio_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct CHIPSTATE *chip = to_state(sd);
-
-	chip->radio = 0;
-	return 0;
-}
-
-static int tvaudio_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *freq)
-{
-	struct CHIPSTATE *chip = to_state(sd);
-	struct CHIPDESC *desc = chip->desc;
-
-	/* For chips that provide getrxsubchans and setaudmode, and doesn't
-	   automatically follows the stereo carrier, a kthread is
-	   created to set the audio standard. In this case, when then
-	   the video channel is changed, tvaudio starts on MONO mode.
-	   After waiting for 2 seconds, the kernel thread is called,
-	   to follow whatever audio standard is pointed by the
-	   audio carrier.
-	 */
-	if (chip->thread) {
-		desc->setaudmode(chip, V4L2_TUNER_MODE_MONO);
-		chip->prevmode = -1; /* reset previous mode */
-		mod_timer(&chip->wt, jiffies+msecs_to_jiffies(2000));
-	}
-	return 0;
-}
-
-static int tvaudio_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TVAUDIO, 0);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops tvaudio_core_ops = {
-	.g_chip_ident = tvaudio_g_chip_ident,
-	.queryctrl = tvaudio_queryctrl,
-	.g_ctrl = tvaudio_g_ctrl,
-	.s_ctrl = tvaudio_s_ctrl,
-	.s_std = tvaudio_s_std,
-};
-
-static const struct v4l2_subdev_tuner_ops tvaudio_tuner_ops = {
-	.s_radio = tvaudio_s_radio,
-	.s_frequency = tvaudio_s_frequency,
-	.s_tuner = tvaudio_s_tuner,
-	.g_tuner = tvaudio_g_tuner,
-};
-
-static const struct v4l2_subdev_audio_ops tvaudio_audio_ops = {
-	.s_routing = tvaudio_s_routing,
-};
-
-static const struct v4l2_subdev_ops tvaudio_ops = {
-	.core = &tvaudio_core_ops,
-	.tuner = &tvaudio_tuner_ops,
-	.audio = &tvaudio_audio_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-
-/* i2c registration                                                       */
-
-static int tvaudio_probe(struct i2c_client *client, const struct i2c_device_id *id)
-{
-	struct CHIPSTATE *chip;
-	struct CHIPDESC  *desc;
-	struct v4l2_subdev *sd;
-
-	if (debug) {
-		printk(KERN_INFO "tvaudio: TV audio decoder + audio/video mux driver\n");
-		printk(KERN_INFO "tvaudio: known chips: ");
-		for (desc = chiplist; desc->name != NULL; desc++)
-			printk("%s%s", (desc == chiplist) ? "" : ", ", desc->name);
-		printk("\n");
-	}
-
-	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
-	if (!chip)
-		return -ENOMEM;
-	sd = &chip->sd;
-	v4l2_i2c_subdev_init(sd, client, &tvaudio_ops);
-
-	/* find description for the chip */
-	v4l2_dbg(1, debug, sd, "chip found @ 0x%x\n", client->addr<<1);
-	for (desc = chiplist; desc->name != NULL; desc++) {
-		if (0 == *(desc->insmodopt))
-			continue;
-		if (client->addr < desc->addr_lo ||
-		    client->addr > desc->addr_hi)
-			continue;
-		if (desc->checkit && !desc->checkit(chip))
-			continue;
-		break;
-	}
-	if (desc->name == NULL) {
-		v4l2_dbg(1, debug, sd, "no matching chip description found\n");
-		kfree(chip);
-		return -EIO;
-	}
-	v4l2_info(sd, "%s found @ 0x%x (%s)\n", desc->name, client->addr<<1, client->adapter->name);
-	if (desc->flags) {
-		v4l2_dbg(1, debug, sd, "matches:%s%s%s.\n",
-			(desc->flags & CHIP_HAS_VOLUME)     ? " volume"      : "",
-			(desc->flags & CHIP_HAS_BASSTREBLE) ? " bass/treble" : "",
-			(desc->flags & CHIP_HAS_INPUTSEL)   ? " audiomux"    : "");
-	}
-
-	/* fill required data structures */
-	if (!id)
-		strlcpy(client->name, desc->name, I2C_NAME_SIZE);
-	chip->desc = desc;
-	chip->shadow.count = desc->registers+1;
-	chip->prevmode = -1;
-	chip->audmode = V4L2_TUNER_MODE_LANG1;
-
-	/* initialization  */
-	if (desc->initialize != NULL)
-		desc->initialize(chip);
-	else
-		chip_cmd(chip, "init", &desc->init);
-
-	if (desc->flags & CHIP_HAS_VOLUME) {
-		if (!desc->volfunc) {
-			/* This shouldn't be happen. Warn user, but keep working
-			   without volume controls
-			 */
-			v4l2_info(sd, "volume callback undefined!\n");
-			desc->flags &= ~CHIP_HAS_VOLUME;
-		} else {
-			chip->left  = desc->leftinit  ? desc->leftinit  : 65535;
-			chip->right = desc->rightinit ? desc->rightinit : 65535;
-			chip_write(chip, desc->leftreg,
-				   desc->volfunc(chip->left));
-			chip_write(chip, desc->rightreg,
-				   desc->volfunc(chip->right));
-		}
-	}
-	if (desc->flags & CHIP_HAS_BASSTREBLE) {
-		if (!desc->bassfunc || !desc->treblefunc) {
-			/* This shouldn't be happen. Warn user, but keep working
-			   without bass/treble controls
-			 */
-			v4l2_info(sd, "bass/treble callbacks undefined!\n");
-			desc->flags &= ~CHIP_HAS_BASSTREBLE;
-		} else {
-			chip->treble = desc->trebleinit ?
-						desc->trebleinit : 32768;
-			chip->bass   = desc->bassinit   ?
-						desc->bassinit   : 32768;
-			chip_write(chip, desc->bassreg,
-				   desc->bassfunc(chip->bass));
-			chip_write(chip, desc->treblereg,
-				   desc->treblefunc(chip->treble));
-		}
-	}
-
-	chip->thread = NULL;
-	init_timer(&chip->wt);
-	if (desc->flags & CHIP_NEED_CHECKMODE) {
-		if (!desc->getrxsubchans || !desc->setaudmode) {
-			/* This shouldn't be happen. Warn user, but keep working
-			   without kthread
-			 */
-			v4l2_info(sd, "set/get mode callbacks undefined!\n");
-			return 0;
-		}
-		/* start async thread */
-		chip->wt.function = chip_thread_wake;
-		chip->wt.data     = (unsigned long)chip;
-		chip->thread = kthread_run(chip_thread, chip, client->name);
-		if (IS_ERR(chip->thread)) {
-			v4l2_warn(sd, "failed to create kthread\n");
-			chip->thread = NULL;
-		}
-	}
-	return 0;
-}
-
-static int tvaudio_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct CHIPSTATE *chip = to_state(sd);
-
-	del_timer_sync(&chip->wt);
-	if (chip->thread) {
-		/* shutdown async thread */
-		kthread_stop(chip->thread);
-		chip->thread = NULL;
-	}
-
-	v4l2_device_unregister_subdev(sd);
-	kfree(chip);
-	return 0;
-}
-
-/* This driver supports many devices and the idea is to let the driver
-   detect which device is present. So rather than listing all supported
-   devices here, we pretend to support a single, fake device type. */
-static const struct i2c_device_id tvaudio_id[] = {
-	{ "tvaudio", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, tvaudio_id);
-
-static struct i2c_driver tvaudio_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "tvaudio",
-	},
-	.probe		= tvaudio_probe,
-	.remove		= tvaudio_remove,
-	.id_table	= tvaudio_id,
-};
-
-module_i2c_driver(tvaudio_driver);
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
deleted file mode 100644
index 3b6cf03..0000000
--- a/drivers/media/video/tveeprom.c
+++ /dev/null
@@ -1,792 +0,0 @@
-/*
- * tveeprom - eeprom decoder for tvcard configuration eeproms
- *
- * Data and decoding routines shamelessly borrowed from bttv-cards.c
- * eeprom access routine shamelessly borrowed from bttv-if.c
- * which are:
-
-    Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
-			   & Marcus Metzler (mocm@thp.uni-koeln.de)
-    (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
-
- * Adjustments to fit a more general model and all bugs:
-
-	Copyright (C) 2003 John Klar <linpvr at projectplasma.com>
-
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/videodev2.h>
-#include <linux/i2c.h>
-
-#include <media/tuner.h>
-#include <media/tveeprom.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-chip-ident.h>
-
-MODULE_DESCRIPTION("i2c Hauppauge eeprom decoder driver");
-MODULE_AUTHOR("John Klar");
-MODULE_LICENSE("GPL");
-
-static int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
-
-#define STRM(array, i) \
-	(i < sizeof(array) / sizeof(char *) ? array[i] : "unknown")
-
-#define tveeprom_info(fmt, arg...) \
-	v4l_printk(KERN_INFO, "tveeprom", c->adapter, c->addr, fmt , ## arg)
-#define tveeprom_warn(fmt, arg...) \
-	v4l_printk(KERN_WARNING, "tveeprom", c->adapter, c->addr, fmt , ## arg)
-#define tveeprom_dbg(fmt, arg...) do { \
-	if (debug) \
-		v4l_printk(KERN_DEBUG, "tveeprom", \
-				c->adapter, c->addr, fmt , ## arg); \
-	} while (0)
-
-/*
- * The Hauppauge eeprom uses an 8bit field to determine which
- * tuner formats the tuner supports.
- */
-static struct HAUPPAUGE_TUNER_FMT
-{
-	int	id;
-	char *name;
-}
-hauppauge_tuner_fmt[] =
-{
-	{ V4L2_STD_UNKNOWN,                   " UNKNOWN" },
-	{ V4L2_STD_UNKNOWN,                   " FM" },
-	{ V4L2_STD_B|V4L2_STD_GH,             " PAL(B/G)" },
-	{ V4L2_STD_MN,                        " NTSC(M)" },
-	{ V4L2_STD_PAL_I,                     " PAL(I)" },
-	{ V4L2_STD_SECAM_L|V4L2_STD_SECAM_LC, " SECAM(L/L')" },
-	{ V4L2_STD_DK,                        " PAL(D/D1/K)" },
-	{ V4L2_STD_ATSC,                      " ATSC/DVB Digital" },
-};
-
-/* This is the full list of possible tuners. Many thanks to Hauppauge for
-   supplying this information. Note that many tuners where only used for
-   testing and never made it to the outside world. So you will only see
-   a subset in actual produced cards. */
-static struct HAUPPAUGE_TUNER
-{
-	int  id;
-	char *name;
-}
-hauppauge_tuner[] =
-{
-	/* 0-9 */
-	{ TUNER_ABSENT,        		"None" },
-	{ TUNER_ABSENT,        		"External" },
-	{ TUNER_ABSENT,        		"Unspecified" },
-	{ TUNER_PHILIPS_PAL,   		"Philips FI1216" },
-	{ TUNER_PHILIPS_SECAM, 		"Philips FI1216MF" },
-	{ TUNER_PHILIPS_NTSC,  		"Philips FI1236" },
-	{ TUNER_PHILIPS_PAL_I, 		"Philips FI1246" },
-	{ TUNER_PHILIPS_PAL_DK,		"Philips FI1256" },
-	{ TUNER_PHILIPS_PAL,   		"Philips FI1216 MK2" },
-	{ TUNER_PHILIPS_SECAM, 		"Philips FI1216MF MK2" },
-	/* 10-19 */
-	{ TUNER_PHILIPS_NTSC,  		"Philips FI1236 MK2" },
-	{ TUNER_PHILIPS_PAL_I, 		"Philips FI1246 MK2" },
-	{ TUNER_PHILIPS_PAL_DK,		"Philips FI1256 MK2" },
-	{ TUNER_TEMIC_NTSC,    		"Temic 4032FY5" },
-	{ TUNER_TEMIC_PAL,     		"Temic 4002FH5" },
-	{ TUNER_TEMIC_PAL_I,   		"Temic 4062FY5" },
-	{ TUNER_PHILIPS_PAL,   		"Philips FR1216 MK2" },
-	{ TUNER_PHILIPS_SECAM, 		"Philips FR1216MF MK2" },
-	{ TUNER_PHILIPS_NTSC,  		"Philips FR1236 MK2" },
-	{ TUNER_PHILIPS_PAL_I, 		"Philips FR1246 MK2" },
-	/* 20-29 */
-	{ TUNER_PHILIPS_PAL_DK,		"Philips FR1256 MK2" },
-	{ TUNER_PHILIPS_PAL,   		"Philips FM1216" },
-	{ TUNER_PHILIPS_SECAM, 		"Philips FM1216MF" },
-	{ TUNER_PHILIPS_NTSC,  		"Philips FM1236" },
-	{ TUNER_PHILIPS_PAL_I, 		"Philips FM1246" },
-	{ TUNER_PHILIPS_PAL_DK,		"Philips FM1256" },
-	{ TUNER_TEMIC_4036FY5_NTSC, 	"Temic 4036FY5" },
-	{ TUNER_ABSENT,        		"Samsung TCPN9082D" },
-	{ TUNER_ABSENT,        		"Samsung TCPM9092P" },
-	{ TUNER_TEMIC_4006FH5_PAL, 	"Temic 4006FH5" },
-	/* 30-39 */
-	{ TUNER_ABSENT,        		"Samsung TCPN9085D" },
-	{ TUNER_ABSENT,        		"Samsung TCPB9085P" },
-	{ TUNER_ABSENT,        		"Samsung TCPL9091P" },
-	{ TUNER_TEMIC_4039FR5_NTSC, 	"Temic 4039FR5" },
-	{ TUNER_PHILIPS_FQ1216ME,   	"Philips FQ1216 ME" },
-	{ TUNER_TEMIC_4066FY5_PAL_I, 	"Temic 4066FY5" },
-	{ TUNER_PHILIPS_NTSC,        	"Philips TD1536" },
-	{ TUNER_PHILIPS_NTSC,        	"Philips TD1536D" },
-	{ TUNER_PHILIPS_NTSC,  		"Philips FMR1236" }, /* mono radio */
-	{ TUNER_ABSENT,        		"Philips FI1256MP" },
-	/* 40-49 */
-	{ TUNER_ABSENT,        		"Samsung TCPQ9091P" },
-	{ TUNER_TEMIC_4006FN5_MULTI_PAL, "Temic 4006FN5" },
-	{ TUNER_TEMIC_4009FR5_PAL, 	"Temic 4009FR5" },
-	{ TUNER_TEMIC_4046FM5,     	"Temic 4046FM5" },
-	{ TUNER_TEMIC_4009FN5_MULTI_PAL_FM, "Temic 4009FN5" },
-	{ TUNER_ABSENT,        		"Philips TD1536D FH 44"},
-	{ TUNER_LG_NTSC_FM,    		"LG TP18NSR01F"},
-	{ TUNER_LG_PAL_FM,     		"LG TP18PSB01D"},
-	{ TUNER_LG_PAL,        		"LG TP18PSB11D"},
-	{ TUNER_LG_PAL_I_FM,   		"LG TAPC-I001D"},
-	/* 50-59 */
-	{ TUNER_LG_PAL_I,      		"LG TAPC-I701D"},
-	{ TUNER_ABSENT,       		"Temic 4042FI5"},
-	{ TUNER_MICROTUNE_4049FM5, 	"Microtune 4049 FM5"},
-	{ TUNER_ABSENT,        		"LG TPI8NSR11F"},
-	{ TUNER_ABSENT,        		"Microtune 4049 FM5 Alt I2C"},
-	{ TUNER_PHILIPS_FM1216ME_MK3, 	"Philips FQ1216ME MK3"},
-	{ TUNER_ABSENT,        		"Philips FI1236 MK3"},
-	{ TUNER_PHILIPS_FM1216ME_MK3, 	"Philips FM1216 ME MK3"},
-	{ TUNER_PHILIPS_FM1236_MK3, 	"Philips FM1236 MK3"},
-	{ TUNER_ABSENT,        		"Philips FM1216MP MK3"},
-	/* 60-69 */
-	{ TUNER_PHILIPS_FM1216ME_MK3, 	"LG S001D MK3"},
-	{ TUNER_ABSENT,        		"LG M001D MK3"},
-	{ TUNER_PHILIPS_FM1216ME_MK3, 	"LG S701D MK3"},
-	{ TUNER_ABSENT,        		"LG M701D MK3"},
-	{ TUNER_ABSENT,        		"Temic 4146FM5"},
-	{ TUNER_ABSENT,        		"Temic 4136FY5"},
-	{ TUNER_ABSENT,        		"Temic 4106FH5"},
-	{ TUNER_ABSENT,        		"Philips FQ1216LMP MK3"},
-	{ TUNER_LG_NTSC_TAPE,  		"LG TAPE H001F MK3"},
-	{ TUNER_LG_NTSC_TAPE,  		"LG TAPE H701F MK3"},
-	/* 70-79 */
-	{ TUNER_ABSENT,        		"LG TALN H200T"},
-	{ TUNER_ABSENT,        		"LG TALN H250T"},
-	{ TUNER_ABSENT,        		"LG TALN M200T"},
-	{ TUNER_ABSENT,        		"LG TALN Z200T"},
-	{ TUNER_ABSENT,        		"LG TALN S200T"},
-	{ TUNER_ABSENT,        		"Thompson DTT7595"},
-	{ TUNER_ABSENT,        		"Thompson DTT7592"},
-	{ TUNER_ABSENT,        		"Silicon TDA8275C1 8290"},
-	{ TUNER_ABSENT,        		"Silicon TDA8275C1 8290 FM"},
-	{ TUNER_ABSENT,        		"Thompson DTT757"},
-	/* 80-89 */
-	{ TUNER_PHILIPS_FQ1216LME_MK3, 	"Philips FQ1216LME MK3"},
-	{ TUNER_LG_PAL_NEW_TAPC, 	"LG TAPC G701D"},
-	{ TUNER_LG_NTSC_NEW_TAPC, 	"LG TAPC H791F"},
-	{ TUNER_LG_PAL_NEW_TAPC, 	"TCL 2002MB 3"},
-	{ TUNER_LG_PAL_NEW_TAPC, 	"TCL 2002MI 3"},
-	{ TUNER_TCL_2002N,     		"TCL 2002N 6A"},
-	{ TUNER_PHILIPS_FM1236_MK3, 	"Philips FQ1236 MK3"},
-	{ TUNER_SAMSUNG_TCPN_2121P30A, 	"Samsung TCPN 2121P30A"},
-	{ TUNER_ABSENT,        		"Samsung TCPE 4121P30A"},
-	{ TUNER_PHILIPS_FM1216ME_MK3, 	"TCL MFPE05 2"},
-	/* 90-99 */
-	{ TUNER_ABSENT,        		"LG TALN H202T"},
-	{ TUNER_PHILIPS_FQ1216AME_MK4, 	"Philips FQ1216AME MK4"},
-	{ TUNER_PHILIPS_FQ1236A_MK4, 	"Philips FQ1236A MK4"},
-	{ TUNER_ABSENT,       		"Philips FQ1286A MK4"},
-	{ TUNER_ABSENT,        		"Philips FQ1216ME MK5"},
-	{ TUNER_ABSENT,        		"Philips FQ1236 MK5"},
-	{ TUNER_SAMSUNG_TCPG_6121P30A, 	"Samsung TCPG 6121P30A"},
-	{ TUNER_TCL_2002MB,    		"TCL 2002MB_3H"},
-	{ TUNER_ABSENT,        		"TCL 2002MI_3H"},
-	{ TUNER_TCL_2002N,     		"TCL 2002N 5H"},
-	/* 100-109 */
-	{ TUNER_PHILIPS_FMD1216ME_MK3, 	"Philips FMD1216ME"},
-	{ TUNER_TEA5767,       		"Philips TEA5768HL FM Radio"},
-	{ TUNER_ABSENT,        		"Panasonic ENV57H12D5"},
-	{ TUNER_PHILIPS_FM1236_MK3, 	"TCL MFNM05-4"},
-	{ TUNER_PHILIPS_FM1236_MK3,	"TCL MNM05-4"},
-	{ TUNER_PHILIPS_FM1216ME_MK3, 	"TCL MPE05-2"},
-	{ TUNER_ABSENT,        		"TCL MQNM05-4"},
-	{ TUNER_ABSENT,        		"LG TAPC-W701D"},
-	{ TUNER_ABSENT,        		"TCL 9886P-WM"},
-	{ TUNER_ABSENT,        		"TCL 1676NM-WM"},
-	/* 110-119 */
-	{ TUNER_ABSENT,        		"Thompson DTT75105"},
-	{ TUNER_ABSENT,        		"Conexant_CX24109"},
-	{ TUNER_TCL_2002N,     		"TCL M2523_5N_E"},
-	{ TUNER_TCL_2002MB,    		"TCL M2523_3DB_E"},
-	{ TUNER_ABSENT,        		"Philips 8275A"},
-	{ TUNER_ABSENT,        		"Microtune MT2060"},
-	{ TUNER_PHILIPS_FM1236_MK3, 	"Philips FM1236 MK5"},
-	{ TUNER_PHILIPS_FM1216ME_MK3, 	"Philips FM1216ME MK5"},
-	{ TUNER_ABSENT,        		"TCL M2523_3DI_E"},
-	{ TUNER_ABSENT,        		"Samsung THPD5222FG30A"},
-	/* 120-129 */
-	{ TUNER_XC2028,        		"Xceive XC3028"},
-	{ TUNER_PHILIPS_FQ1216LME_MK3,	"Philips FQ1216LME MK5"},
-	{ TUNER_ABSENT,        		"Philips FQD1216LME"},
-	{ TUNER_ABSENT,        		"Conexant CX24118A"},
-	{ TUNER_ABSENT,        		"TCL DMF11WIP"},
-	{ TUNER_ABSENT,        		"TCL MFNM05_4H_E"},
-	{ TUNER_ABSENT,        		"TCL MNM05_4H_E"},
-	{ TUNER_ABSENT,        		"TCL MPE05_2H_E"},
-	{ TUNER_ABSENT,        		"TCL MQNM05_4_U"},
-	{ TUNER_ABSENT,        		"TCL M2523_5NH_E"},
-	/* 130-139 */
-	{ TUNER_ABSENT,        		"TCL M2523_3DBH_E"},
-	{ TUNER_ABSENT,        		"TCL M2523_3DIH_E"},
-	{ TUNER_ABSENT,        		"TCL MFPE05_2_U"},
-	{ TUNER_PHILIPS_FMD1216MEX_MK3,	"Philips FMD1216MEX"},
-	{ TUNER_ABSENT,        		"Philips FRH2036B"},
-	{ TUNER_ABSENT,        		"Panasonic ENGF75_01GF"},
-	{ TUNER_ABSENT,        		"MaxLinear MXL5005"},
-	{ TUNER_ABSENT,        		"MaxLinear MXL5003"},
-	{ TUNER_ABSENT,        		"Xceive XC2028"},
-	{ TUNER_ABSENT,        		"Microtune MT2131"},
-	/* 140-149 */
-	{ TUNER_ABSENT,        		"Philips 8275A_8295"},
-	{ TUNER_ABSENT,        		"TCL MF02GIP_5N_E"},
-	{ TUNER_ABSENT,        		"TCL MF02GIP_3DB_E"},
-	{ TUNER_ABSENT,        		"TCL MF02GIP_3DI_E"},
-	{ TUNER_ABSENT,        		"Microtune MT2266"},
-	{ TUNER_ABSENT,        		"TCL MF10WPP_4N_E"},
-	{ TUNER_ABSENT,        		"LG TAPQ_H702F"},
-	{ TUNER_ABSENT,        		"TCL M09WPP_4N_E"},
-	{ TUNER_ABSENT,        		"MaxLinear MXL5005_v2"},
-	{ TUNER_PHILIPS_TDA8290, 	"Philips 18271_8295"},
-	/* 150-159 */
-	{ TUNER_XC5000,                 "Xceive XC5000"},
-	{ TUNER_ABSENT,                 "Xceive XC3028L"},
-	{ TUNER_ABSENT,                 "NXP 18271C2_716x"},
-	{ TUNER_ABSENT,                 "Xceive XC4000"},
-	{ TUNER_ABSENT,                 "Dibcom 7070"},
-	{ TUNER_PHILIPS_TDA8290,        "NXP 18271C2"},
-	{ TUNER_ABSENT,                 "Siano SMS1010"},
-	{ TUNER_ABSENT,                 "Siano SMS1150"},
-	{ TUNER_ABSENT,                 "MaxLinear 5007"},
-	{ TUNER_ABSENT,                 "TCL M09WPP_2P_E"},
-	/* 160-169 */
-	{ TUNER_ABSENT,                 "Siano SMS1180"},
-	{ TUNER_ABSENT,                 "Maxim_MAX2165"},
-	{ TUNER_ABSENT,                 "Siano SMS1140"},
-	{ TUNER_ABSENT,                 "Siano SMS1150 B1"},
-	{ TUNER_ABSENT,                 "MaxLinear 111"},
-	{ TUNER_ABSENT,                 "Dibcom 7770"},
-	{ TUNER_ABSENT,                 "Siano SMS1180VNS"},
-	{ TUNER_ABSENT,                 "Siano SMS1184"},
-	{ TUNER_PHILIPS_FQ1236_MK5,	"TCL M30WTP-4N-E"},
-	{ TUNER_ABSENT,                 "TCL_M11WPP_2PN_E"},
-	/* 170-179 */
-	{ TUNER_ABSENT,                 "MaxLinear 301"},
-	{ TUNER_ABSENT,                 "Mirics MSi001"},
-	{ TUNER_ABSENT,                 "MaxLinear MxL241SF"},
-	{ TUNER_XC5000C,                "Xceive XC5000C"},
-	{ TUNER_ABSENT,                 "Montage M68TS2020"},
-	{ TUNER_ABSENT,                 "Siano SMS1530"},
-	{ TUNER_ABSENT,                 "Dibcom 7090"},
-	{ TUNER_ABSENT,                 "Xceive XC5200C"},
-	{ TUNER_ABSENT,                 "NXP 18273"},
-	{ TUNER_ABSENT,                 "Montage M88TS2022"},
-	/* 180-189 */
-	{ TUNER_ABSENT,                 "NXP 18272M"},
-	{ TUNER_ABSENT,                 "NXP 18272S"},
-};
-
-/* Use V4L2_IDENT_AMBIGUOUS for those audio 'chips' that are
- * internal to a video chip, i.e. not a separate audio chip. */
-static struct HAUPPAUGE_AUDIOIC
-{
-	u32   id;
-	char *name;
-}
-audioIC[] =
-{
-	/* 0-4 */
-	{ V4L2_IDENT_NONE,      "None"      },
-	{ V4L2_IDENT_UNKNOWN,   "TEA6300"   },
-	{ V4L2_IDENT_UNKNOWN,   "TEA6320"   },
-	{ V4L2_IDENT_UNKNOWN,   "TDA9850"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP3400C"  },
-	/* 5-9 */
-	{ V4L2_IDENT_MSPX4XX,   "MSP3410D"  },
-	{ V4L2_IDENT_MSPX4XX,   "MSP3415"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP3430"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP3438"   },
-	{ V4L2_IDENT_UNKNOWN,   "CS5331"    },
-	/* 10-14 */
-	{ V4L2_IDENT_MSPX4XX,   "MSP3435"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP3440"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP3445"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP3411"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP3416"   },
-	/* 15-19 */
-	{ V4L2_IDENT_MSPX4XX,   "MSP3425"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP3451"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP3418"   },
-	{ V4L2_IDENT_UNKNOWN,   "Type 0x12" },
-	{ V4L2_IDENT_UNKNOWN,   "OKI7716"   },
-	/* 20-24 */
-	{ V4L2_IDENT_MSPX4XX,   "MSP4410"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP4420"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP4440"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP4450"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP4408"   },
-	/* 25-29 */
-	{ V4L2_IDENT_MSPX4XX,   "MSP4418"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP4428"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP4448"   },
-	{ V4L2_IDENT_MSPX4XX,   "MSP4458"   },
-	{ V4L2_IDENT_MSPX4XX,   "Type 0x1d" },
-	/* 30-34 */
-	{ V4L2_IDENT_AMBIGUOUS, "CX880"     },
-	{ V4L2_IDENT_AMBIGUOUS, "CX881"     },
-	{ V4L2_IDENT_AMBIGUOUS, "CX883"     },
-	{ V4L2_IDENT_AMBIGUOUS, "CX882"     },
-	{ V4L2_IDENT_AMBIGUOUS, "CX25840"   },
-	/* 35-39 */
-	{ V4L2_IDENT_AMBIGUOUS, "CX25841"   },
-	{ V4L2_IDENT_AMBIGUOUS, "CX25842"   },
-	{ V4L2_IDENT_AMBIGUOUS, "CX25843"   },
-	{ V4L2_IDENT_AMBIGUOUS, "CX23418"   },
-	{ V4L2_IDENT_AMBIGUOUS, "CX23885"   },
-	/* 40-44 */
-	{ V4L2_IDENT_AMBIGUOUS, "CX23888"   },
-	{ V4L2_IDENT_AMBIGUOUS, "SAA7131"   },
-	{ V4L2_IDENT_AMBIGUOUS, "CX23887"   },
-	{ V4L2_IDENT_AMBIGUOUS, "SAA7164"   },
-	{ V4L2_IDENT_AMBIGUOUS, "AU8522"    },
-};
-
-/* This list is supplied by Hauppauge. Thanks! */
-static const char *decoderIC[] = {
-	/* 0-4 */
-	"None", "BT815", "BT817", "BT819", "BT815A",
-	/* 5-9 */
-	"BT817A", "BT819A", "BT827", "BT829", "BT848",
-	/* 10-14 */
-	"BT848A", "BT849A", "BT829A", "BT827A", "BT878",
-	/* 15-19 */
-	"BT879", "BT880", "VPX3226E", "SAA7114", "SAA7115",
-	/* 20-24 */
-	"CX880", "CX881", "CX883", "SAA7111", "SAA7113",
-	/* 25-29 */
-	"CX882", "TVP5150A", "CX25840", "CX25841", "CX25842",
-	/* 30-34 */
-	"CX25843", "CX23418", "NEC61153", "CX23885", "CX23888",
-	/* 35-39 */
-	"SAA7131", "CX25837", "CX23887", "CX23885A", "CX23887A",
-	/* 40-42 */
-	"SAA7164", "CX23885B", "AU8522"
-};
-
-static int hasRadioTuner(int tunerType)
-{
-	switch (tunerType) {
-	case 18: /* PNPEnv_TUNER_FR1236_MK2 */
-	case 23: /* PNPEnv_TUNER_FM1236 */
-	case 38: /* PNPEnv_TUNER_FMR1236 */
-	case 16: /* PNPEnv_TUNER_FR1216_MK2 */
-	case 19: /* PNPEnv_TUNER_FR1246_MK2 */
-	case 21: /* PNPEnv_TUNER_FM1216 */
-	case 24: /* PNPEnv_TUNER_FM1246 */
-	case 17: /* PNPEnv_TUNER_FR1216MF_MK2 */
-	case 22: /* PNPEnv_TUNER_FM1216MF */
-	case 20: /* PNPEnv_TUNER_FR1256_MK2 */
-	case 25: /* PNPEnv_TUNER_FM1256 */
-	case 33: /* PNPEnv_TUNER_4039FR5 */
-	case 42: /* PNPEnv_TUNER_4009FR5 */
-	case 52: /* PNPEnv_TUNER_4049FM5 */
-	case 54: /* PNPEnv_TUNER_4049FM5_AltI2C */
-	case 44: /* PNPEnv_TUNER_4009FN5 */
-	case 31: /* PNPEnv_TUNER_TCPB9085P */
-	case 30: /* PNPEnv_TUNER_TCPN9085D */
-	case 46: /* PNPEnv_TUNER_TP18NSR01F */
-	case 47: /* PNPEnv_TUNER_TP18PSB01D */
-	case 49: /* PNPEnv_TUNER_TAPC_I001D */
-	case 60: /* PNPEnv_TUNER_TAPE_S001D_MK3 */
-	case 57: /* PNPEnv_TUNER_FM1216ME_MK3 */
-	case 59: /* PNPEnv_TUNER_FM1216MP_MK3 */
-	case 58: /* PNPEnv_TUNER_FM1236_MK3 */
-	case 68: /* PNPEnv_TUNER_TAPE_H001F_MK3 */
-	case 61: /* PNPEnv_TUNER_TAPE_M001D_MK3 */
-	case 78: /* PNPEnv_TUNER_TDA8275C1_8290_FM */
-	case 89: /* PNPEnv_TUNER_TCL_MFPE05_2 */
-	case 92: /* PNPEnv_TUNER_PHILIPS_FQ1236A_MK4 */
-	case 105:
-		return 1;
-	}
-	return 0;
-}
-
-void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
-				unsigned char *eeprom_data)
-{
-	/* ----------------------------------------------
-	** The hauppauge eeprom format is tagged
-	**
-	** if packet[0] == 0x84, then packet[0..1] == length
-	** else length = packet[0] & 3f;
-	** if packet[0] & f8 == f8, then EOD and packet[1] == checksum
-	**
-	** In our (ivtv) case we're interested in the following:
-	** tuner type:   tag [00].05 or [0a].01 (index into hauppauge_tuner)
-	** tuner fmts:   tag [00].04 or [0a].00 (bitmask index into
-	**		 hauppauge_tuner_fmt)
-	** radio:        tag [00].{last} or [0e].00  (bitmask.  bit2=FM)
-	** audio proc:   tag [02].01 or [05].00 (mask with 0x7f)
-	** decoder proc: tag [09].01)
-
-	** Fun info:
-	** model:      tag [00].07-08 or [06].00-01
-	** revision:   tag [00].09-0b or [06].04-06
-	** serial#:    tag [01].05-07 or [04].04-06
-
-	** # of inputs/outputs ???
-	*/
-
-	int i, j, len, done, beenhere, tag, start;
-
-	int tuner1 = 0, t_format1 = 0, audioic = -1;
-	char *t_name1 = NULL;
-	const char *t_fmt_name1[8] = { " none", "", "", "", "", "", "", "" };
-
-	int tuner2 = 0, t_format2 = 0;
-	char *t_name2 = NULL;
-	const char *t_fmt_name2[8] = { " none", "", "", "", "", "", "", "" };
-
-	memset(tvee, 0, sizeof(*tvee));
-	tvee->tuner_type = TUNER_ABSENT;
-	tvee->tuner2_type = TUNER_ABSENT;
-
-	done = len = beenhere = 0;
-
-	/* Different eeprom start offsets for em28xx, cx2388x and cx23418 */
-	if (eeprom_data[0] == 0x1a &&
-	    eeprom_data[1] == 0xeb &&
-	    eeprom_data[2] == 0x67 &&
-	    eeprom_data[3] == 0x95)
-		start = 0xa0; /* Generic em28xx offset */
-	else if ((eeprom_data[0] & 0xe1) == 0x01 &&
-		 eeprom_data[1] == 0x00 &&
-		 eeprom_data[2] == 0x00 &&
-		 eeprom_data[8] == 0x84)
-		start = 8; /* Generic cx2388x offset */
-	else if (eeprom_data[1] == 0x70 &&
-		 eeprom_data[2] == 0x00 &&
-		 eeprom_data[4] == 0x74 &&
-		 eeprom_data[8] == 0x84)
-		start = 8; /* Generic cx23418 offset (models 74xxx) */
-	else
-		start = 0;
-
-	for (i = start; !done && i < 256; i += len) {
-		if (eeprom_data[i] == 0x84) {
-			len = eeprom_data[i + 1] + (eeprom_data[i + 2] << 8);
-			i += 3;
-		} else if ((eeprom_data[i] & 0xf0) == 0x70) {
-			if (eeprom_data[i] & 0x08) {
-				/* verify checksum! */
-				done = 1;
-				break;
-			}
-			len = eeprom_data[i] & 0x07;
-			++i;
-		} else {
-			tveeprom_warn("Encountered bad packet header [%02x]. "
-				"Corrupt or not a Hauppauge eeprom.\n",
-				eeprom_data[i]);
-			return;
-		}
-
-		if (debug) {
-			tveeprom_info("Tag [%02x] + %d bytes:",
-					eeprom_data[i], len - 1);
-			for (j = 1; j < len; j++)
-				printk(KERN_CONT " %02x", eeprom_data[i + j]);
-			printk(KERN_CONT "\n");
-		}
-
-		/* process by tag */
-		tag = eeprom_data[i];
-		switch (tag) {
-		case 0x00:
-			/* tag: 'Comprehensive' */
-			tuner1 = eeprom_data[i+6];
-			t_format1 = eeprom_data[i+5];
-			tvee->has_radio = eeprom_data[i+len-1];
-			/* old style tag, don't know how to detect
-			IR presence, mark as unknown. */
-			tvee->has_ir = 0;
-			tvee->model =
-				eeprom_data[i+8] +
-				(eeprom_data[i+9] << 8);
-			tvee->revision = eeprom_data[i+10] +
-				(eeprom_data[i+11] << 8) +
-				(eeprom_data[i+12] << 16);
-			break;
-
-		case 0x01:
-			/* tag: 'SerialID' */
-			tvee->serial_number =
-				eeprom_data[i+6] +
-				(eeprom_data[i+7] << 8) +
-				(eeprom_data[i+8] << 16);
-			break;
-
-		case 0x02:
-			/* tag 'AudioInfo'
-			Note mask with 0x7F, high bit used on some older models
-			to indicate 4052 mux was removed in favor of using MSP
-			inputs directly. */
-			audioic = eeprom_data[i+2] & 0x7f;
-			if (audioic < ARRAY_SIZE(audioIC))
-				tvee->audio_processor = audioIC[audioic].id;
-			else
-				tvee->audio_processor = V4L2_IDENT_UNKNOWN;
-			break;
-
-		/* case 0x03: tag 'EEInfo' */
-
-		case 0x04:
-			/* tag 'SerialID2' */
-			tvee->serial_number =
-				eeprom_data[i+5] +
-				(eeprom_data[i+6] << 8) +
-				(eeprom_data[i+7] << 16);
-
-			if ((eeprom_data[i + 8] & 0xf0) &&
-					(tvee->serial_number < 0xffffff)) {
-				tvee->MAC_address[0] = 0x00;
-				tvee->MAC_address[1] = 0x0D;
-				tvee->MAC_address[2] = 0xFE;
-				tvee->MAC_address[3] = eeprom_data[i + 7];
-				tvee->MAC_address[4] = eeprom_data[i + 6];
-				tvee->MAC_address[5] = eeprom_data[i + 5];
-				tvee->has_MAC_address = 1;
-			}
-			break;
-
-		case 0x05:
-			/* tag 'Audio2'
-			Note mask with 0x7F, high bit used on some older models
-			to indicate 4052 mux was removed in favor of using MSP
-			inputs directly. */
-			audioic = eeprom_data[i+1] & 0x7f;
-			if (audioic < ARRAY_SIZE(audioIC))
-				tvee->audio_processor = audioIC[audioic].id;
-			else
-				tvee->audio_processor = V4L2_IDENT_UNKNOWN;
-
-			break;
-
-		case 0x06:
-			/* tag 'ModelRev' */
-			tvee->model =
-				eeprom_data[i + 1] +
-				(eeprom_data[i + 2] << 8) +
-				(eeprom_data[i + 3] << 16) +
-				(eeprom_data[i + 4] << 24);
-			tvee->revision =
-				eeprom_data[i + 5] +
-				(eeprom_data[i + 6] << 8) +
-				(eeprom_data[i + 7] << 16);
-			break;
-
-		case 0x07:
-			/* tag 'Details': according to Hauppauge not interesting
-			on any PCI-era or later boards. */
-			break;
-
-		/* there is no tag 0x08 defined */
-
-		case 0x09:
-			/* tag 'Video' */
-			tvee->decoder_processor = eeprom_data[i + 1];
-			break;
-
-		case 0x0a:
-			/* tag 'Tuner' */
-			if (beenhere == 0) {
-				tuner1 = eeprom_data[i + 2];
-				t_format1 = eeprom_data[i + 1];
-				beenhere = 1;
-			} else {
-				/* a second (radio) tuner may be present */
-				tuner2 = eeprom_data[i + 2];
-				t_format2 = eeprom_data[i + 1];
-				/* not a TV tuner? */
-				if (t_format2 == 0)
-					tvee->has_radio = 1; /* must be radio */
-			}
-			break;
-
-		case 0x0b:
-			/* tag 'Inputs': according to Hauppauge this is specific
-			to each driver family, so no good assumptions can be
-			made. */
-			break;
-
-		/* case 0x0c: tag 'Balun' */
-		/* case 0x0d: tag 'Teletext' */
-
-		case 0x0e:
-			/* tag: 'Radio' */
-			tvee->has_radio = eeprom_data[i+1];
-			break;
-
-		case 0x0f:
-			/* tag 'IRInfo' */
-			tvee->has_ir = 1 | (eeprom_data[i+1] << 1);
-			break;
-
-		/* case 0x10: tag 'VBIInfo' */
-		/* case 0x11: tag 'QCInfo' */
-		/* case 0x12: tag 'InfoBits' */
-
-		default:
-			tveeprom_dbg("Not sure what to do with tag [%02x]\n",
-					tag);
-			/* dump the rest of the packet? */
-		}
-	}
-
-	if (!done) {
-		tveeprom_warn("Ran out of data!\n");
-		return;
-	}
-
-	if (tvee->revision != 0) {
-		tvee->rev_str[0] = 32 + ((tvee->revision >> 18) & 0x3f);
-		tvee->rev_str[1] = 32 + ((tvee->revision >> 12) & 0x3f);
-		tvee->rev_str[2] = 32 + ((tvee->revision >>  6) & 0x3f);
-		tvee->rev_str[3] = 32 + (tvee->revision & 0x3f);
-		tvee->rev_str[4] = 0;
-	}
-
-	if (hasRadioTuner(tuner1) && !tvee->has_radio) {
-		tveeprom_info("The eeprom says no radio is present, but the tuner type\n");
-		tveeprom_info("indicates otherwise. I will assume that radio is present.\n");
-		tvee->has_radio = 1;
-	}
-
-	if (tuner1 < ARRAY_SIZE(hauppauge_tuner)) {
-		tvee->tuner_type = hauppauge_tuner[tuner1].id;
-		t_name1 = hauppauge_tuner[tuner1].name;
-	} else {
-		t_name1 = "unknown";
-	}
-
-	if (tuner2 < ARRAY_SIZE(hauppauge_tuner)) {
-		tvee->tuner2_type = hauppauge_tuner[tuner2].id;
-		t_name2 = hauppauge_tuner[tuner2].name;
-	} else {
-		t_name2 = "unknown";
-	}
-
-	tvee->tuner_hauppauge_model = tuner1;
-	tvee->tuner2_hauppauge_model = tuner2;
-	tvee->tuner_formats = 0;
-	tvee->tuner2_formats = 0;
-	for (i = j = 0; i < 8; i++) {
-		if (t_format1 & (1 << i)) {
-			tvee->tuner_formats |= hauppauge_tuner_fmt[i].id;
-			t_fmt_name1[j++] = hauppauge_tuner_fmt[i].name;
-		}
-	}
-	for (i = j = 0; i < 8; i++) {
-		if (t_format2 & (1 << i)) {
-			tvee->tuner2_formats |= hauppauge_tuner_fmt[i].id;
-			t_fmt_name2[j++] = hauppauge_tuner_fmt[i].name;
-		}
-	}
-
-	tveeprom_info("Hauppauge model %d, rev %s, serial# %d\n",
-		tvee->model, tvee->rev_str, tvee->serial_number);
-	if (tvee->has_MAC_address == 1)
-		tveeprom_info("MAC address is %pM\n", tvee->MAC_address);
-	tveeprom_info("tuner model is %s (idx %d, type %d)\n",
-		t_name1, tuner1, tvee->tuner_type);
-	tveeprom_info("TV standards%s%s%s%s%s%s%s%s (eeprom 0x%02x)\n",
-		t_fmt_name1[0], t_fmt_name1[1], t_fmt_name1[2],
-		t_fmt_name1[3],	t_fmt_name1[4], t_fmt_name1[5],
-		t_fmt_name1[6], t_fmt_name1[7],	t_format1);
-	if (tuner2)
-		tveeprom_info("second tuner model is %s (idx %d, type %d)\n",
-					t_name2, tuner2, tvee->tuner2_type);
-	if (t_format2)
-		tveeprom_info("TV standards%s%s%s%s%s%s%s%s (eeprom 0x%02x)\n",
-			t_fmt_name2[0], t_fmt_name2[1], t_fmt_name2[2],
-			t_fmt_name2[3],	t_fmt_name2[4], t_fmt_name2[5],
-			t_fmt_name2[6], t_fmt_name2[7], t_format2);
-	if (audioic < 0) {
-		tveeprom_info("audio processor is unknown (no idx)\n");
-		tvee->audio_processor = V4L2_IDENT_UNKNOWN;
-	} else {
-		if (audioic < ARRAY_SIZE(audioIC))
-			tveeprom_info("audio processor is %s (idx %d)\n",
-					audioIC[audioic].name, audioic);
-		else
-			tveeprom_info("audio processor is unknown (idx %d)\n",
-								audioic);
-	}
-	if (tvee->decoder_processor)
-		tveeprom_info("decoder processor is %s (idx %d)\n",
-			STRM(decoderIC, tvee->decoder_processor),
-			tvee->decoder_processor);
-	if (tvee->has_ir)
-		tveeprom_info("has %sradio, has %sIR receiver, has %sIR transmitter\n",
-				tvee->has_radio ? "" : "no ",
-				(tvee->has_ir & 2) ? "" : "no ",
-				(tvee->has_ir & 4) ? "" : "no ");
-	else
-		tveeprom_info("has %sradio\n",
-				tvee->has_radio ? "" : "no ");
-}
-EXPORT_SYMBOL(tveeprom_hauppauge_analog);
-
-/* ----------------------------------------------------------------------- */
-/* generic helper functions                                                */
-
-int tveeprom_read(struct i2c_client *c, unsigned char *eedata, int len)
-{
-	unsigned char buf;
-	int err;
-
-	buf = 0;
-	err = i2c_master_send(c, &buf, 1);
-	if (err != 1) {
-		tveeprom_info("Huh, no eeprom present (err=%d)?\n", err);
-		return -1;
-	}
-	err = i2c_master_recv(c, eedata, len);
-	if (err != len) {
-		tveeprom_warn("i2c eeprom read error (err=%d)\n", err);
-		return -1;
-	}
-	if (debug) {
-		int i;
-
-		tveeprom_info("full 256-byte eeprom dump:\n");
-		for (i = 0; i < len; i++) {
-			if (0 == (i % 16))
-				tveeprom_info("%02x:", i);
-			printk(KERN_CONT " %02x", eedata[i]);
-			if (15 == (i % 16))
-				printk(KERN_CONT "\n");
-		}
-	}
-	return 0;
-}
-EXPORT_SYMBOL(tveeprom_read);
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c
deleted file mode 100644
index cd615c1..0000000
--- a/drivers/media/video/tvp514x.c
+++ /dev/null
@@ -1,1166 +0,0 @@
-/*
- * drivers/media/video/tvp514x.c
- *
- * TI TVP5146/47 decoder driver
- *
- * Copyright (C) 2008 Texas Instruments Inc
- * Author: Vaibhav Hiremath <hvaibhav@ti.com>
- *
- * Contributors:
- *     Sivaraj R <sivaraj@ti.com>
- *     Brijesh R Jadav <brijesh.j@ti.com>
- *     Hardik Shah <hardik.shah@ti.com>
- *     Manjunath Hadli <mrh@ti.com>
- *     Karicheri Muralidharan <m-karicheri2@ti.com>
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/videodev2.h>
-#include <linux/module.h>
-
-#include <media/v4l2-device.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-mediabus.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-ctrls.h>
-#include <media/tvp514x.h>
-
-#include "tvp514x_regs.h"
-
-/* Module Name */
-#define TVP514X_MODULE_NAME		"tvp514x"
-
-/* Private macros for TVP */
-#define I2C_RETRY_COUNT                 (5)
-#define LOCK_RETRY_COUNT                (5)
-#define LOCK_RETRY_DELAY                (200)
-
-/* Debug functions */
-static bool debug;
-module_param(debug, bool, 0644);
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
-
-MODULE_AUTHOR("Texas Instruments");
-MODULE_DESCRIPTION("TVP514X linux decoder driver");
-MODULE_LICENSE("GPL");
-
-/* enum tvp514x_std - enum for supported standards */
-enum tvp514x_std {
-	STD_NTSC_MJ = 0,
-	STD_PAL_BDGHIN,
-	STD_INVALID
-};
-
-/**
- * struct tvp514x_std_info - Structure to store standard informations
- * @width: Line width in pixels
- * @height:Number of active lines
- * @video_std: Value to write in REG_VIDEO_STD register
- * @standard: v4l2 standard structure information
- */
-struct tvp514x_std_info {
-	unsigned long width;
-	unsigned long height;
-	u8 video_std;
-	struct v4l2_standard standard;
-};
-
-static struct tvp514x_reg tvp514x_reg_list_default[0x40];
-
-static int tvp514x_s_stream(struct v4l2_subdev *sd, int enable);
-/**
- * struct tvp514x_decoder - TVP5146/47 decoder object
- * @sd: Subdevice Slave handle
- * @tvp514x_regs: copy of hw's regs with preset values.
- * @pdata: Board specific
- * @ver: Chip version
- * @streaming: TVP5146/47 decoder streaming - enabled or disabled.
- * @current_std: Current standard
- * @num_stds: Number of standards
- * @std_list: Standards list
- * @input: Input routing at chip level
- * @output: Output routing at chip level
- */
-struct tvp514x_decoder {
-	struct v4l2_subdev sd;
-	struct v4l2_ctrl_handler hdl;
-	struct tvp514x_reg tvp514x_regs[ARRAY_SIZE(tvp514x_reg_list_default)];
-	const struct tvp514x_platform_data *pdata;
-
-	int ver;
-	int streaming;
-
-	enum tvp514x_std current_std;
-	int num_stds;
-	const struct tvp514x_std_info *std_list;
-	/* Input and Output Routing parameters */
-	u32 input;
-	u32 output;
-};
-
-/* TVP514x default register values */
-static struct tvp514x_reg tvp514x_reg_list_default[] = {
-	/* Composite selected */
-	{TOK_WRITE, REG_INPUT_SEL, 0x05},
-	{TOK_WRITE, REG_AFE_GAIN_CTRL, 0x0F},
-	/* Auto mode */
-	{TOK_WRITE, REG_VIDEO_STD, 0x00},
-	{TOK_WRITE, REG_OPERATION_MODE, 0x00},
-	{TOK_SKIP, REG_AUTOSWITCH_MASK, 0x3F},
-	{TOK_WRITE, REG_COLOR_KILLER, 0x10},
-	{TOK_WRITE, REG_LUMA_CONTROL1, 0x00},
-	{TOK_WRITE, REG_LUMA_CONTROL2, 0x00},
-	{TOK_WRITE, REG_LUMA_CONTROL3, 0x02},
-	{TOK_WRITE, REG_BRIGHTNESS, 0x80},
-	{TOK_WRITE, REG_CONTRAST, 0x80},
-	{TOK_WRITE, REG_SATURATION, 0x80},
-	{TOK_WRITE, REG_HUE, 0x00},
-	{TOK_WRITE, REG_CHROMA_CONTROL1, 0x00},
-	{TOK_WRITE, REG_CHROMA_CONTROL2, 0x0E},
-	/* Reserved */
-	{TOK_SKIP, 0x0F, 0x00},
-	{TOK_WRITE, REG_COMP_PR_SATURATION, 0x80},
-	{TOK_WRITE, REG_COMP_Y_CONTRAST, 0x80},
-	{TOK_WRITE, REG_COMP_PB_SATURATION, 0x80},
-	/* Reserved */
-	{TOK_SKIP, 0x13, 0x00},
-	{TOK_WRITE, REG_COMP_Y_BRIGHTNESS, 0x80},
-	/* Reserved */
-	{TOK_SKIP, 0x15, 0x00},
-	/* NTSC timing */
-	{TOK_SKIP, REG_AVID_START_PIXEL_LSB, 0x55},
-	{TOK_SKIP, REG_AVID_START_PIXEL_MSB, 0x00},
-	{TOK_SKIP, REG_AVID_STOP_PIXEL_LSB, 0x25},
-	{TOK_SKIP, REG_AVID_STOP_PIXEL_MSB, 0x03},
-	/* NTSC timing */
-	{TOK_SKIP, REG_HSYNC_START_PIXEL_LSB, 0x00},
-	{TOK_SKIP, REG_HSYNC_START_PIXEL_MSB, 0x00},
-	{TOK_SKIP, REG_HSYNC_STOP_PIXEL_LSB, 0x40},
-	{TOK_SKIP, REG_HSYNC_STOP_PIXEL_MSB, 0x00},
-	/* NTSC timing */
-	{TOK_SKIP, REG_VSYNC_START_LINE_LSB, 0x04},
-	{TOK_SKIP, REG_VSYNC_START_LINE_MSB, 0x00},
-	{TOK_SKIP, REG_VSYNC_STOP_LINE_LSB, 0x07},
-	{TOK_SKIP, REG_VSYNC_STOP_LINE_MSB, 0x00},
-	/* NTSC timing */
-	{TOK_SKIP, REG_VBLK_START_LINE_LSB, 0x01},
-	{TOK_SKIP, REG_VBLK_START_LINE_MSB, 0x00},
-	{TOK_SKIP, REG_VBLK_STOP_LINE_LSB, 0x15},
-	{TOK_SKIP, REG_VBLK_STOP_LINE_MSB, 0x00},
-	/* Reserved */
-	{TOK_SKIP, 0x26, 0x00},
-	/* Reserved */
-	{TOK_SKIP, 0x27, 0x00},
-	{TOK_SKIP, REG_FAST_SWTICH_CONTROL, 0xCC},
-	/* Reserved */
-	{TOK_SKIP, 0x29, 0x00},
-	{TOK_SKIP, REG_FAST_SWTICH_SCART_DELAY, 0x00},
-	/* Reserved */
-	{TOK_SKIP, 0x2B, 0x00},
-	{TOK_SKIP, REG_SCART_DELAY, 0x00},
-	{TOK_SKIP, REG_CTI_DELAY, 0x00},
-	{TOK_SKIP, REG_CTI_CONTROL, 0x00},
-	/* Reserved */
-	{TOK_SKIP, 0x2F, 0x00},
-	/* Reserved */
-	{TOK_SKIP, 0x30, 0x00},
-	/* Reserved */
-	{TOK_SKIP, 0x31, 0x00},
-	/* HS, VS active high */
-	{TOK_WRITE, REG_SYNC_CONTROL, 0x00},
-	/* 10-bit BT.656 */
-	{TOK_WRITE, REG_OUTPUT_FORMATTER1, 0x00},
-	/* Enable clk & data */
-	{TOK_WRITE, REG_OUTPUT_FORMATTER2, 0x11},
-	/* Enable AVID & FLD */
-	{TOK_WRITE, REG_OUTPUT_FORMATTER3, 0xEE},
-	/* Enable VS & HS */
-	{TOK_WRITE, REG_OUTPUT_FORMATTER4, 0xAF},
-	{TOK_WRITE, REG_OUTPUT_FORMATTER5, 0xFF},
-	{TOK_WRITE, REG_OUTPUT_FORMATTER6, 0xFF},
-	/* Clear status */
-	{TOK_WRITE, REG_CLEAR_LOST_LOCK, 0x01},
-	{TOK_TERM, 0, 0},
-};
-
-/**
- * Supported standards -
- *
- * Currently supports two standards only, need to add support for rest of the
- * modes, like SECAM, etc...
- */
-static const struct tvp514x_std_info tvp514x_std_list[] = {
-	/* Standard: STD_NTSC_MJ */
-	[STD_NTSC_MJ] = {
-	 .width = NTSC_NUM_ACTIVE_PIXELS,
-	 .height = NTSC_NUM_ACTIVE_LINES,
-	 .video_std = VIDEO_STD_NTSC_MJ_BIT,
-	 .standard = {
-		      .index = 0,
-		      .id = V4L2_STD_NTSC,
-		      .name = "NTSC",
-		      .frameperiod = {1001, 30000},
-		      .framelines = 525
-		     },
-	/* Standard: STD_PAL_BDGHIN */
-	},
-	[STD_PAL_BDGHIN] = {
-	 .width = PAL_NUM_ACTIVE_PIXELS,
-	 .height = PAL_NUM_ACTIVE_LINES,
-	 .video_std = VIDEO_STD_PAL_BDGHIN_BIT,
-	 .standard = {
-		      .index = 1,
-		      .id = V4L2_STD_PAL,
-		      .name = "PAL",
-		      .frameperiod = {1, 25},
-		      .framelines = 625
-		     },
-	},
-	/* Standard: need to add for additional standard */
-};
-
-
-static inline struct tvp514x_decoder *to_decoder(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct tvp514x_decoder, sd);
-}
-
-static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
-{
-	return &container_of(ctrl->handler, struct tvp514x_decoder, hdl)->sd;
-}
-
-
-/**
- * tvp514x_read_reg() - Read a value from a register in an TVP5146/47.
- * @sd: ptr to v4l2_subdev struct
- * @reg: TVP5146/47 register address
- *
- * Returns value read if successful, or non-zero (-1) otherwise.
- */
-static int tvp514x_read_reg(struct v4l2_subdev *sd, u8 reg)
-{
-	int err, retry = 0;
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-read_again:
-
-	err = i2c_smbus_read_byte_data(client, reg);
-	if (err < 0) {
-		if (retry <= I2C_RETRY_COUNT) {
-			v4l2_warn(sd, "Read: retry ... %d\n", retry);
-			retry++;
-			msleep_interruptible(10);
-			goto read_again;
-		}
-	}
-
-	return err;
-}
-
-/**
- * dump_reg() - dump the register content of TVP5146/47.
- * @sd: ptr to v4l2_subdev struct
- * @reg: TVP5146/47 register address
- */
-static void dump_reg(struct v4l2_subdev *sd, u8 reg)
-{
-	u32 val;
-
-	val = tvp514x_read_reg(sd, reg);
-	v4l2_info(sd, "Reg(0x%.2X): 0x%.2X\n", reg, val);
-}
-
-/**
- * tvp514x_write_reg() - Write a value to a register in TVP5146/47
- * @sd: ptr to v4l2_subdev struct
- * @reg: TVP5146/47 register address
- * @val: value to be written to the register
- *
- * Write a value to a register in an TVP5146/47 decoder device.
- * Returns zero if successful, or non-zero otherwise.
- */
-static int tvp514x_write_reg(struct v4l2_subdev *sd, u8 reg, u8 val)
-{
-	int err, retry = 0;
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-write_again:
-
-	err = i2c_smbus_write_byte_data(client, reg, val);
-	if (err) {
-		if (retry <= I2C_RETRY_COUNT) {
-			v4l2_warn(sd, "Write: retry ... %d\n", retry);
-			retry++;
-			msleep_interruptible(10);
-			goto write_again;
-		}
-	}
-
-	return err;
-}
-
-/**
- * tvp514x_write_regs() : Initializes a list of TVP5146/47 registers
- * @sd: ptr to v4l2_subdev struct
- * @reglist: list of TVP5146/47 registers and values
- *
- * Initializes a list of TVP5146/47 registers:-
- *		if token is TOK_TERM, then entire write operation terminates
- *		if token is TOK_DELAY, then a delay of 'val' msec is introduced
- *		if token is TOK_SKIP, then the register write is skipped
- *		if token is TOK_WRITE, then the register write is performed
- * Returns zero if successful, or non-zero otherwise.
- */
-static int tvp514x_write_regs(struct v4l2_subdev *sd,
-			      const struct tvp514x_reg reglist[])
-{
-	int err;
-	const struct tvp514x_reg *next = reglist;
-
-	for (; next->token != TOK_TERM; next++) {
-		if (next->token == TOK_DELAY) {
-			msleep(next->val);
-			continue;
-		}
-
-		if (next->token == TOK_SKIP)
-			continue;
-
-		err = tvp514x_write_reg(sd, next->reg, (u8) next->val);
-		if (err) {
-			v4l2_err(sd, "Write failed. Err[%d]\n", err);
-			return err;
-		}
-	}
-	return 0;
-}
-
-/**
- * tvp514x_query_current_std() : Query the current standard detected by TVP5146/47
- * @sd: ptr to v4l2_subdev struct
- *
- * Returns the current standard detected by TVP5146/47, STD_INVALID if there is no
- * standard detected.
- */
-static enum tvp514x_std tvp514x_query_current_std(struct v4l2_subdev *sd)
-{
-	u8 std, std_status;
-
-	std = tvp514x_read_reg(sd, REG_VIDEO_STD);
-	if ((std & VIDEO_STD_MASK) == VIDEO_STD_AUTO_SWITCH_BIT)
-		/* use the standard status register */
-		std_status = tvp514x_read_reg(sd, REG_VIDEO_STD_STATUS);
-	else
-		/* use the standard register itself */
-		std_status = std;
-
-	switch (std_status & VIDEO_STD_MASK) {
-	case VIDEO_STD_NTSC_MJ_BIT:
-		return STD_NTSC_MJ;
-
-	case VIDEO_STD_PAL_BDGHIN_BIT:
-		return STD_PAL_BDGHIN;
-
-	default:
-		return STD_INVALID;
-	}
-
-	return STD_INVALID;
-}
-
-/* TVP5146/47 register dump function */
-static void tvp514x_reg_dump(struct v4l2_subdev *sd)
-{
-	dump_reg(sd, REG_INPUT_SEL);
-	dump_reg(sd, REG_AFE_GAIN_CTRL);
-	dump_reg(sd, REG_VIDEO_STD);
-	dump_reg(sd, REG_OPERATION_MODE);
-	dump_reg(sd, REG_COLOR_KILLER);
-	dump_reg(sd, REG_LUMA_CONTROL1);
-	dump_reg(sd, REG_LUMA_CONTROL2);
-	dump_reg(sd, REG_LUMA_CONTROL3);
-	dump_reg(sd, REG_BRIGHTNESS);
-	dump_reg(sd, REG_CONTRAST);
-	dump_reg(sd, REG_SATURATION);
-	dump_reg(sd, REG_HUE);
-	dump_reg(sd, REG_CHROMA_CONTROL1);
-	dump_reg(sd, REG_CHROMA_CONTROL2);
-	dump_reg(sd, REG_COMP_PR_SATURATION);
-	dump_reg(sd, REG_COMP_Y_CONTRAST);
-	dump_reg(sd, REG_COMP_PB_SATURATION);
-	dump_reg(sd, REG_COMP_Y_BRIGHTNESS);
-	dump_reg(sd, REG_AVID_START_PIXEL_LSB);
-	dump_reg(sd, REG_AVID_START_PIXEL_MSB);
-	dump_reg(sd, REG_AVID_STOP_PIXEL_LSB);
-	dump_reg(sd, REG_AVID_STOP_PIXEL_MSB);
-	dump_reg(sd, REG_HSYNC_START_PIXEL_LSB);
-	dump_reg(sd, REG_HSYNC_START_PIXEL_MSB);
-	dump_reg(sd, REG_HSYNC_STOP_PIXEL_LSB);
-	dump_reg(sd, REG_HSYNC_STOP_PIXEL_MSB);
-	dump_reg(sd, REG_VSYNC_START_LINE_LSB);
-	dump_reg(sd, REG_VSYNC_START_LINE_MSB);
-	dump_reg(sd, REG_VSYNC_STOP_LINE_LSB);
-	dump_reg(sd, REG_VSYNC_STOP_LINE_MSB);
-	dump_reg(sd, REG_VBLK_START_LINE_LSB);
-	dump_reg(sd, REG_VBLK_START_LINE_MSB);
-	dump_reg(sd, REG_VBLK_STOP_LINE_LSB);
-	dump_reg(sd, REG_VBLK_STOP_LINE_MSB);
-	dump_reg(sd, REG_SYNC_CONTROL);
-	dump_reg(sd, REG_OUTPUT_FORMATTER1);
-	dump_reg(sd, REG_OUTPUT_FORMATTER2);
-	dump_reg(sd, REG_OUTPUT_FORMATTER3);
-	dump_reg(sd, REG_OUTPUT_FORMATTER4);
-	dump_reg(sd, REG_OUTPUT_FORMATTER5);
-	dump_reg(sd, REG_OUTPUT_FORMATTER6);
-	dump_reg(sd, REG_CLEAR_LOST_LOCK);
-}
-
-/**
- * tvp514x_configure() - Configure the TVP5146/47 registers
- * @sd: ptr to v4l2_subdev struct
- * @decoder: ptr to tvp514x_decoder structure
- *
- * Returns zero if successful, or non-zero otherwise.
- */
-static int tvp514x_configure(struct v4l2_subdev *sd,
-		struct tvp514x_decoder *decoder)
-{
-	int err;
-
-	/* common register initialization */
-	err =
-	    tvp514x_write_regs(sd, decoder->tvp514x_regs);
-	if (err)
-		return err;
-
-	if (debug)
-		tvp514x_reg_dump(sd);
-
-	return 0;
-}
-
-/**
- * tvp514x_detect() - Detect if an tvp514x is present, and if so which revision.
- * @sd: pointer to standard V4L2 sub-device structure
- * @decoder: pointer to tvp514x_decoder structure
- *
- * A device is considered to be detected if the chip ID (LSB and MSB)
- * registers match the expected values.
- * Any value of the rom version register is accepted.
- * Returns ENODEV error number if no device is detected, or zero
- * if a device is detected.
- */
-static int tvp514x_detect(struct v4l2_subdev *sd,
-		struct tvp514x_decoder *decoder)
-{
-	u8 chip_id_msb, chip_id_lsb, rom_ver;
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	chip_id_msb = tvp514x_read_reg(sd, REG_CHIP_ID_MSB);
-	chip_id_lsb = tvp514x_read_reg(sd, REG_CHIP_ID_LSB);
-	rom_ver = tvp514x_read_reg(sd, REG_ROM_VERSION);
-
-	v4l2_dbg(1, debug, sd,
-		 "chip id detected msb:0x%x lsb:0x%x rom version:0x%x\n",
-		 chip_id_msb, chip_id_lsb, rom_ver);
-	if ((chip_id_msb != TVP514X_CHIP_ID_MSB)
-		|| ((chip_id_lsb != TVP5146_CHIP_ID_LSB)
-		&& (chip_id_lsb != TVP5147_CHIP_ID_LSB))) {
-		/* We didn't read the values we expected, so this must not be
-		 * an TVP5146/47.
-		 */
-		v4l2_err(sd, "chip id mismatch msb:0x%x lsb:0x%x\n",
-				chip_id_msb, chip_id_lsb);
-		return -ENODEV;
-	}
-
-	decoder->ver = rom_ver;
-
-	v4l2_info(sd, "%s (Version - 0x%.2x) found at 0x%x (%s)\n",
-			client->name, decoder->ver,
-			client->addr << 1, client->adapter->name);
-	return 0;
-}
-
-/**
- * tvp514x_querystd() - V4L2 decoder interface handler for querystd
- * @sd: pointer to standard V4L2 sub-device structure
- * @std_id: standard V4L2 std_id ioctl enum
- *
- * Returns the current standard detected by TVP5146/47. If no active input is
- * detected then *std_id is set to 0 and the function returns 0.
- */
-static int tvp514x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std_id)
-{
-	struct tvp514x_decoder *decoder = to_decoder(sd);
-	enum tvp514x_std current_std;
-	enum tvp514x_input input_sel;
-	u8 sync_lock_status, lock_mask;
-
-	if (std_id == NULL)
-		return -EINVAL;
-
-	*std_id = V4L2_STD_UNKNOWN;
-
-	/* query the current standard */
-	current_std = tvp514x_query_current_std(sd);
-	if (current_std == STD_INVALID)
-		return 0;
-
-	input_sel = decoder->input;
-
-	switch (input_sel) {
-	case INPUT_CVBS_VI1A:
-	case INPUT_CVBS_VI1B:
-	case INPUT_CVBS_VI1C:
-	case INPUT_CVBS_VI2A:
-	case INPUT_CVBS_VI2B:
-	case INPUT_CVBS_VI2C:
-	case INPUT_CVBS_VI3A:
-	case INPUT_CVBS_VI3B:
-	case INPUT_CVBS_VI3C:
-	case INPUT_CVBS_VI4A:
-		lock_mask = STATUS_CLR_SUBCAR_LOCK_BIT |
-			STATUS_HORZ_SYNC_LOCK_BIT |
-			STATUS_VIRT_SYNC_LOCK_BIT;
-		break;
-
-	case INPUT_SVIDEO_VI2A_VI1A:
-	case INPUT_SVIDEO_VI2B_VI1B:
-	case INPUT_SVIDEO_VI2C_VI1C:
-	case INPUT_SVIDEO_VI2A_VI3A:
-	case INPUT_SVIDEO_VI2B_VI3B:
-	case INPUT_SVIDEO_VI2C_VI3C:
-	case INPUT_SVIDEO_VI4A_VI1A:
-	case INPUT_SVIDEO_VI4A_VI1B:
-	case INPUT_SVIDEO_VI4A_VI1C:
-	case INPUT_SVIDEO_VI4A_VI3A:
-	case INPUT_SVIDEO_VI4A_VI3B:
-	case INPUT_SVIDEO_VI4A_VI3C:
-		lock_mask = STATUS_HORZ_SYNC_LOCK_BIT |
-			STATUS_VIRT_SYNC_LOCK_BIT;
-		break;
-		/*Need to add other interfaces*/
-	default:
-		return -EINVAL;
-	}
-	/* check whether signal is locked */
-	sync_lock_status = tvp514x_read_reg(sd, REG_STATUS1);
-	if (lock_mask != (sync_lock_status & lock_mask))
-		return 0;	/* No input detected */
-
-	*std_id = decoder->std_list[current_std].standard.id;
-
-	v4l2_dbg(1, debug, sd, "Current STD: %s\n",
-			decoder->std_list[current_std].standard.name);
-	return 0;
-}
-
-/**
- * tvp514x_s_std() - V4L2 decoder interface handler for s_std
- * @sd: pointer to standard V4L2 sub-device structure
- * @std_id: standard V4L2 v4l2_std_id ioctl enum
- *
- * If std_id is supported, sets the requested standard. Otherwise, returns
- * -EINVAL
- */
-static int tvp514x_s_std(struct v4l2_subdev *sd, v4l2_std_id std_id)
-{
-	struct tvp514x_decoder *decoder = to_decoder(sd);
-	int err, i;
-
-	for (i = 0; i < decoder->num_stds; i++)
-		if (std_id & decoder->std_list[i].standard.id)
-			break;
-
-	if ((i == decoder->num_stds) || (i == STD_INVALID))
-		return -EINVAL;
-
-	err = tvp514x_write_reg(sd, REG_VIDEO_STD,
-				decoder->std_list[i].video_std);
-	if (err)
-		return err;
-
-	decoder->current_std = i;
-	decoder->tvp514x_regs[REG_VIDEO_STD].val =
-		decoder->std_list[i].video_std;
-
-	v4l2_dbg(1, debug, sd, "Standard set to: %s\n",
-			decoder->std_list[i].standard.name);
-	return 0;
-}
-
-/**
- * tvp514x_s_routing() - V4L2 decoder interface handler for s_routing
- * @sd: pointer to standard V4L2 sub-device structure
- * @input: input selector for routing the signal
- * @output: output selector for routing the signal
- * @config: config value. Not used
- *
- * If index is valid, selects the requested input. Otherwise, returns -EINVAL if
- * the input is not supported or there is no active signal present in the
- * selected input.
- */
-static int tvp514x_s_routing(struct v4l2_subdev *sd,
-				u32 input, u32 output, u32 config)
-{
-	struct tvp514x_decoder *decoder = to_decoder(sd);
-	int err;
-	enum tvp514x_input input_sel;
-	enum tvp514x_output output_sel;
-	u8 sync_lock_status, lock_mask;
-	int try_count = LOCK_RETRY_COUNT;
-
-	if ((input >= INPUT_INVALID) ||
-			(output >= OUTPUT_INVALID))
-		/* Index out of bound */
-		return -EINVAL;
-
-	/*
-	 * For the sequence streamon -> streamoff and again s_input
-	 * it fails to lock the signal, since streamoff puts TVP514x
-	 * into power off state which leads to failure in sub-sequent s_input.
-	 *
-	 * So power up the TVP514x device here, since it is important to lock
-	 * the signal at this stage.
-	 */
-	if (!decoder->streaming)
-		tvp514x_s_stream(sd, 1);
-
-	input_sel = input;
-	output_sel = output;
-
-	err = tvp514x_write_reg(sd, REG_INPUT_SEL, input_sel);
-	if (err)
-		return err;
-
-	output_sel |= tvp514x_read_reg(sd,
-			REG_OUTPUT_FORMATTER1) & 0x7;
-	err = tvp514x_write_reg(sd, REG_OUTPUT_FORMATTER1,
-			output_sel);
-	if (err)
-		return err;
-
-	decoder->tvp514x_regs[REG_INPUT_SEL].val = input_sel;
-	decoder->tvp514x_regs[REG_OUTPUT_FORMATTER1].val = output_sel;
-
-	/* Clear status */
-	msleep(LOCK_RETRY_DELAY);
-	err =
-	    tvp514x_write_reg(sd, REG_CLEAR_LOST_LOCK, 0x01);
-	if (err)
-		return err;
-
-	switch (input_sel) {
-	case INPUT_CVBS_VI1A:
-	case INPUT_CVBS_VI1B:
-	case INPUT_CVBS_VI1C:
-	case INPUT_CVBS_VI2A:
-	case INPUT_CVBS_VI2B:
-	case INPUT_CVBS_VI2C:
-	case INPUT_CVBS_VI3A:
-	case INPUT_CVBS_VI3B:
-	case INPUT_CVBS_VI3C:
-	case INPUT_CVBS_VI4A:
-		lock_mask = STATUS_CLR_SUBCAR_LOCK_BIT |
-			STATUS_HORZ_SYNC_LOCK_BIT |
-			STATUS_VIRT_SYNC_LOCK_BIT;
-		break;
-
-	case INPUT_SVIDEO_VI2A_VI1A:
-	case INPUT_SVIDEO_VI2B_VI1B:
-	case INPUT_SVIDEO_VI2C_VI1C:
-	case INPUT_SVIDEO_VI2A_VI3A:
-	case INPUT_SVIDEO_VI2B_VI3B:
-	case INPUT_SVIDEO_VI2C_VI3C:
-	case INPUT_SVIDEO_VI4A_VI1A:
-	case INPUT_SVIDEO_VI4A_VI1B:
-	case INPUT_SVIDEO_VI4A_VI1C:
-	case INPUT_SVIDEO_VI4A_VI3A:
-	case INPUT_SVIDEO_VI4A_VI3B:
-	case INPUT_SVIDEO_VI4A_VI3C:
-		lock_mask = STATUS_HORZ_SYNC_LOCK_BIT |
-			STATUS_VIRT_SYNC_LOCK_BIT;
-		break;
-	/* Need to add other interfaces*/
-	default:
-		return -EINVAL;
-	}
-
-	while (try_count-- > 0) {
-		/* Allow decoder to sync up with new input */
-		msleep(LOCK_RETRY_DELAY);
-
-		sync_lock_status = tvp514x_read_reg(sd,
-				REG_STATUS1);
-		if (lock_mask == (sync_lock_status & lock_mask))
-			/* Input detected */
-			break;
-	}
-
-	if (try_count < 0)
-		return -EINVAL;
-
-	decoder->input = input;
-	decoder->output = output;
-
-	v4l2_dbg(1, debug, sd, "Input set to: %d\n", input_sel);
-
-	return 0;
-}
-
-/**
- * tvp514x_s_ctrl() - V4L2 decoder interface handler for s_ctrl
- * @ctrl: pointer to v4l2_ctrl structure
- *
- * If the requested control is supported, sets the control's current
- * value in HW. Otherwise, returns -EINVAL if the control is not supported.
- */
-static int tvp514x_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-	struct tvp514x_decoder *decoder = to_decoder(sd);
-	int err = -EINVAL, value;
-
-	value = ctrl->val;
-
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		err = tvp514x_write_reg(sd, REG_BRIGHTNESS, value);
-		if (!err)
-			decoder->tvp514x_regs[REG_BRIGHTNESS].val = value;
-		break;
-	case V4L2_CID_CONTRAST:
-		err = tvp514x_write_reg(sd, REG_CONTRAST, value);
-		if (!err)
-			decoder->tvp514x_regs[REG_CONTRAST].val = value;
-		break;
-	case V4L2_CID_SATURATION:
-		err = tvp514x_write_reg(sd, REG_SATURATION, value);
-		if (!err)
-			decoder->tvp514x_regs[REG_SATURATION].val = value;
-		break;
-	case V4L2_CID_HUE:
-		if (value == 180)
-			value = 0x7F;
-		else if (value == -180)
-			value = 0x80;
-		err = tvp514x_write_reg(sd, REG_HUE, value);
-		if (!err)
-			decoder->tvp514x_regs[REG_HUE].val = value;
-		break;
-	case V4L2_CID_AUTOGAIN:
-		err = tvp514x_write_reg(sd, REG_AFE_GAIN_CTRL, value ? 0x0f : 0x0c);
-		if (!err)
-			decoder->tvp514x_regs[REG_AFE_GAIN_CTRL].val = value;
-		break;
-	}
-
-	v4l2_dbg(1, debug, sd, "Set Control: ID - %d - %d\n",
-			ctrl->id, ctrl->val);
-	return err;
-}
-
-/**
- * tvp514x_enum_mbus_fmt() - V4L2 decoder interface handler for enum_mbus_fmt
- * @sd: pointer to standard V4L2 sub-device structure
- * @index: index of pixelcode to retrieve
- * @code: receives the pixelcode
- *
- * Enumerates supported mediabus formats
- */
-static int
-tvp514x_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
-					enum v4l2_mbus_pixelcode *code)
-{
-	if (index)
-		return -EINVAL;
-
-	*code = V4L2_MBUS_FMT_YUYV10_2X10;
-	return 0;
-}
-
-/**
- * tvp514x_mbus_fmt_cap() - V4L2 decoder interface handler for try/s/g_mbus_fmt
- * @sd: pointer to standard V4L2 sub-device structure
- * @f: pointer to the mediabus format structure
- *
- * Negotiates the image capture size and mediabus format.
- */
-static int
-tvp514x_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f)
-{
-	struct tvp514x_decoder *decoder = to_decoder(sd);
-	enum tvp514x_std current_std;
-
-	if (f == NULL)
-		return -EINVAL;
-
-	/* Calculate height and width based on current standard */
-	current_std = decoder->current_std;
-
-	f->code = V4L2_MBUS_FMT_YUYV10_2X10;
-	f->width = decoder->std_list[current_std].width;
-	f->height = decoder->std_list[current_std].height;
-	f->field = V4L2_FIELD_INTERLACED;
-	f->colorspace = V4L2_COLORSPACE_SMPTE170M;
-
-	v4l2_dbg(1, debug, sd, "MBUS_FMT: Width - %d, Height - %d\n",
-			f->width, f->height);
-	return 0;
-}
-
-/**
- * tvp514x_g_parm() - V4L2 decoder interface handler for g_parm
- * @sd: pointer to standard V4L2 sub-device structure
- * @a: pointer to standard V4L2 VIDIOC_G_PARM ioctl structure
- *
- * Returns the decoder's video CAPTURE parameters.
- */
-static int
-tvp514x_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a)
-{
-	struct tvp514x_decoder *decoder = to_decoder(sd);
-	struct v4l2_captureparm *cparm;
-	enum tvp514x_std current_std;
-
-	if (a == NULL)
-		return -EINVAL;
-
-	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		/* only capture is supported */
-		return -EINVAL;
-
-	/* get the current standard */
-	current_std = decoder->current_std;
-
-	cparm = &a->parm.capture;
-	cparm->capability = V4L2_CAP_TIMEPERFRAME;
-	cparm->timeperframe =
-		decoder->std_list[current_std].standard.frameperiod;
-
-	return 0;
-}
-
-/**
- * tvp514x_s_parm() - V4L2 decoder interface handler for s_parm
- * @sd: pointer to standard V4L2 sub-device structure
- * @a: pointer to standard V4L2 VIDIOC_S_PARM ioctl structure
- *
- * Configures the decoder to use the input parameters, if possible. If
- * not possible, returns the appropriate error code.
- */
-static int
-tvp514x_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *a)
-{
-	struct tvp514x_decoder *decoder = to_decoder(sd);
-	struct v4l2_fract *timeperframe;
-	enum tvp514x_std current_std;
-
-	if (a == NULL)
-		return -EINVAL;
-
-	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		/* only capture is supported */
-		return -EINVAL;
-
-	timeperframe = &a->parm.capture.timeperframe;
-
-	/* get the current standard */
-	current_std = decoder->current_std;
-
-	*timeperframe =
-	    decoder->std_list[current_std].standard.frameperiod;
-
-	return 0;
-}
-
-/**
- * tvp514x_s_stream() - V4L2 decoder i/f handler for s_stream
- * @sd: pointer to standard V4L2 sub-device structure
- * @enable: streaming enable or disable
- *
- * Sets streaming to enable or disable, if possible.
- */
-static int tvp514x_s_stream(struct v4l2_subdev *sd, int enable)
-{
-	int err = 0;
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct tvp514x_decoder *decoder = to_decoder(sd);
-
-	if (decoder->streaming == enable)
-		return 0;
-
-	switch (enable) {
-	case 0:
-	{
-		/* Power Down Sequence */
-		err = tvp514x_write_reg(sd, REG_OPERATION_MODE, 0x01);
-		if (err) {
-			v4l2_err(sd, "Unable to turn off decoder\n");
-			return err;
-		}
-		decoder->streaming = enable;
-		break;
-	}
-	case 1:
-	{
-		struct tvp514x_reg *int_seq = (struct tvp514x_reg *)
-				client->driver->id_table->driver_data;
-
-		/* Power Up Sequence */
-		err = tvp514x_write_regs(sd, int_seq);
-		if (err) {
-			v4l2_err(sd, "Unable to turn on decoder\n");
-			return err;
-		}
-		/* Detect if not already detected */
-		err = tvp514x_detect(sd, decoder);
-		if (err) {
-			v4l2_err(sd, "Unable to detect decoder\n");
-			return err;
-		}
-		err = tvp514x_configure(sd, decoder);
-		if (err) {
-			v4l2_err(sd, "Unable to configure decoder\n");
-			return err;
-		}
-		decoder->streaming = enable;
-		break;
-	}
-	default:
-		err = -ENODEV;
-		break;
-	}
-
-	return err;
-}
-
-static const struct v4l2_ctrl_ops tvp514x_ctrl_ops = {
-	.s_ctrl = tvp514x_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops tvp514x_core_ops = {
-	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
-	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
-	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
-	.g_ctrl = v4l2_subdev_g_ctrl,
-	.s_ctrl = v4l2_subdev_s_ctrl,
-	.queryctrl = v4l2_subdev_queryctrl,
-	.querymenu = v4l2_subdev_querymenu,
-	.s_std = tvp514x_s_std,
-};
-
-static const struct v4l2_subdev_video_ops tvp514x_video_ops = {
-	.s_routing = tvp514x_s_routing,
-	.querystd = tvp514x_querystd,
-	.enum_mbus_fmt = tvp514x_enum_mbus_fmt,
-	.g_mbus_fmt = tvp514x_mbus_fmt,
-	.try_mbus_fmt = tvp514x_mbus_fmt,
-	.s_mbus_fmt = tvp514x_mbus_fmt,
-	.g_parm = tvp514x_g_parm,
-	.s_parm = tvp514x_s_parm,
-	.s_stream = tvp514x_s_stream,
-};
-
-static const struct v4l2_subdev_ops tvp514x_ops = {
-	.core = &tvp514x_core_ops,
-	.video = &tvp514x_video_ops,
-};
-
-static struct tvp514x_decoder tvp514x_dev = {
-	.streaming = 0,
-	.current_std = STD_NTSC_MJ,
-	.std_list = tvp514x_std_list,
-	.num_stds = ARRAY_SIZE(tvp514x_std_list),
-
-};
-
-/**
- * tvp514x_probe() - decoder driver i2c probe handler
- * @client: i2c driver client device structure
- * @id: i2c driver id table
- *
- * Register decoder as an i2c client device and V4L2
- * device.
- */
-static int
-tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)
-{
-	struct tvp514x_decoder *decoder;
-	struct v4l2_subdev *sd;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -EIO;
-
-	if (!client->dev.platform_data) {
-		v4l2_err(client, "No platform data!!\n");
-		return -ENODEV;
-	}
-
-	decoder = kzalloc(sizeof(*decoder), GFP_KERNEL);
-	if (!decoder)
-		return -ENOMEM;
-
-	/* Initialize the tvp514x_decoder with default configuration */
-	*decoder = tvp514x_dev;
-	/* Copy default register configuration */
-	memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default,
-			sizeof(tvp514x_reg_list_default));
-
-	/* Copy board specific information here */
-	decoder->pdata = client->dev.platform_data;
-
-	/**
-	 * Fetch platform specific data, and configure the
-	 * tvp514x_reg_list[] accordingly. Since this is one
-	 * time configuration, no need to preserve.
-	 */
-	decoder->tvp514x_regs[REG_OUTPUT_FORMATTER2].val |=
-		(decoder->pdata->clk_polarity << 1);
-	decoder->tvp514x_regs[REG_SYNC_CONTROL].val |=
-		((decoder->pdata->hs_polarity << 2) |
-		 (decoder->pdata->vs_polarity << 3));
-	/* Set default standard to auto */
-	decoder->tvp514x_regs[REG_VIDEO_STD].val =
-		VIDEO_STD_AUTO_SWITCH_BIT;
-
-	/* Register with V4L2 layer as slave device */
-	sd = &decoder->sd;
-	v4l2_i2c_subdev_init(sd, client, &tvp514x_ops);
-
-	v4l2_ctrl_handler_init(&decoder->hdl, 5);
-	v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops,
-		V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
-	v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops,
-		V4L2_CID_CONTRAST, 0, 255, 1, 128);
-	v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops,
-		V4L2_CID_SATURATION, 0, 255, 1, 128);
-	v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops,
-		V4L2_CID_HUE, -180, 180, 180, 0);
-	v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops,
-		V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
-	sd->ctrl_handler = &decoder->hdl;
-	if (decoder->hdl.error) {
-		int err = decoder->hdl.error;
-
-		v4l2_ctrl_handler_free(&decoder->hdl);
-		kfree(decoder);
-		return err;
-	}
-	v4l2_ctrl_handler_setup(&decoder->hdl);
-
-	v4l2_info(sd, "%s decoder driver registered !!\n", sd->name);
-
-	return 0;
-
-}
-
-/**
- * tvp514x_remove() - decoder driver i2c remove handler
- * @client: i2c driver client device structure
- *
- * Unregister decoder as an i2c client device and V4L2
- * device. Complement of tvp514x_probe().
- */
-static int tvp514x_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct tvp514x_decoder *decoder = to_decoder(sd);
-
-	v4l2_device_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(&decoder->hdl);
-	kfree(decoder);
-	return 0;
-}
-/* TVP5146 Init/Power on Sequence */
-static const struct tvp514x_reg tvp5146_init_reg_seq[] = {
-	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x02},
-	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
-	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0x80},
-	{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01},
-	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x60},
-	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
-	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xB0},
-	{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01},
-	{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x00},
-	{TOK_WRITE, REG_OPERATION_MODE, 0x01},
-	{TOK_WRITE, REG_OPERATION_MODE, 0x00},
-	{TOK_TERM, 0, 0},
-};
-
-/* TVP5147 Init/Power on Sequence */
-static const struct tvp514x_reg tvp5147_init_reg_seq[] =	{
-	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x02},
-	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
-	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0x80},
-	{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01},
-	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x60},
-	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
-	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xB0},
-	{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01},
-	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x16},
-	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
-	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xA0},
-	{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x16},
-	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x60},
-	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
-	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xB0},
-	{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x00},
-	{TOK_WRITE, REG_OPERATION_MODE, 0x01},
-	{TOK_WRITE, REG_OPERATION_MODE, 0x00},
-	{TOK_TERM, 0, 0},
-};
-
-/* TVP5146M2/TVP5147M1 Init/Power on Sequence */
-static const struct tvp514x_reg tvp514xm_init_reg_seq[] = {
-	{TOK_WRITE, REG_OPERATION_MODE, 0x01},
-	{TOK_WRITE, REG_OPERATION_MODE, 0x00},
-	{TOK_TERM, 0, 0},
-};
-
-/**
- * I2C Device Table -
- *
- * name - Name of the actual device/chip.
- * driver_data - Driver data
- */
-static const struct i2c_device_id tvp514x_id[] = {
-	{"tvp5146", (unsigned long)tvp5146_init_reg_seq},
-	{"tvp5146m2", (unsigned long)tvp514xm_init_reg_seq},
-	{"tvp5147", (unsigned long)tvp5147_init_reg_seq},
-	{"tvp5147m1", (unsigned long)tvp514xm_init_reg_seq},
-	{},
-};
-
-MODULE_DEVICE_TABLE(i2c, tvp514x_id);
-
-static struct i2c_driver tvp514x_driver = {
-	.driver = {
-		.owner = THIS_MODULE,
-		.name = TVP514X_MODULE_NAME,
-	},
-	.probe = tvp514x_probe,
-	.remove = tvp514x_remove,
-	.id_table = tvp514x_id,
-};
-
-module_i2c_driver(tvp514x_driver);
diff --git a/drivers/media/video/tvp514x_regs.h b/drivers/media/video/tvp514x_regs.h
deleted file mode 100644
index 18f29ad..0000000
--- a/drivers/media/video/tvp514x_regs.h
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * drivers/media/video/tvp514x_regs.h
- *
- * Copyright (C) 2008 Texas Instruments Inc
- * Author: Vaibhav Hiremath <hvaibhav@ti.com>
- *
- * Contributors:
- *     Sivaraj R <sivaraj@ti.com>
- *     Brijesh R Jadav <brijesh.j@ti.com>
- *     Hardik Shah <hardik.shah@ti.com>
- *     Manjunath Hadli <mrh@ti.com>
- *     Karicheri Muralidharan <m-karicheri2@ti.com>
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _TVP514X_REGS_H
-#define _TVP514X_REGS_H
-
-/*
- * TVP5146/47 registers
- */
-#define REG_INPUT_SEL			(0x00)
-#define REG_AFE_GAIN_CTRL		(0x01)
-#define REG_VIDEO_STD			(0x02)
-#define REG_OPERATION_MODE		(0x03)
-#define REG_AUTOSWITCH_MASK		(0x04)
-
-#define REG_COLOR_KILLER		(0x05)
-#define REG_LUMA_CONTROL1		(0x06)
-#define REG_LUMA_CONTROL2		(0x07)
-#define REG_LUMA_CONTROL3		(0x08)
-
-#define REG_BRIGHTNESS			(0x09)
-#define REG_CONTRAST			(0x0A)
-#define REG_SATURATION			(0x0B)
-#define REG_HUE				(0x0C)
-
-#define REG_CHROMA_CONTROL1		(0x0D)
-#define REG_CHROMA_CONTROL2		(0x0E)
-
-/* 0x0F Reserved */
-
-#define REG_COMP_PR_SATURATION		(0x10)
-#define REG_COMP_Y_CONTRAST		(0x11)
-#define REG_COMP_PB_SATURATION		(0x12)
-
-/* 0x13 Reserved */
-
-#define REG_COMP_Y_BRIGHTNESS		(0x14)
-
-/* 0x15 Reserved */
-
-#define REG_AVID_START_PIXEL_LSB	(0x16)
-#define REG_AVID_START_PIXEL_MSB	(0x17)
-#define REG_AVID_STOP_PIXEL_LSB		(0x18)
-#define REG_AVID_STOP_PIXEL_MSB		(0x19)
-
-#define REG_HSYNC_START_PIXEL_LSB	(0x1A)
-#define REG_HSYNC_START_PIXEL_MSB	(0x1B)
-#define REG_HSYNC_STOP_PIXEL_LSB	(0x1C)
-#define REG_HSYNC_STOP_PIXEL_MSB	(0x1D)
-
-#define REG_VSYNC_START_LINE_LSB	(0x1E)
-#define REG_VSYNC_START_LINE_MSB	(0x1F)
-#define REG_VSYNC_STOP_LINE_LSB		(0x20)
-#define REG_VSYNC_STOP_LINE_MSB		(0x21)
-
-#define REG_VBLK_START_LINE_LSB		(0x22)
-#define REG_VBLK_START_LINE_MSB		(0x23)
-#define REG_VBLK_STOP_LINE_LSB		(0x24)
-#define REG_VBLK_STOP_LINE_MSB		(0x25)
-
-/* 0x26 - 0x27 Reserved */
-
-#define REG_FAST_SWTICH_CONTROL		(0x28)
-
-/* 0x29 Reserved */
-
-#define REG_FAST_SWTICH_SCART_DELAY	(0x2A)
-
-/* 0x2B Reserved */
-
-#define REG_SCART_DELAY			(0x2C)
-#define REG_CTI_DELAY			(0x2D)
-#define REG_CTI_CONTROL			(0x2E)
-
-/* 0x2F - 0x31 Reserved */
-
-#define REG_SYNC_CONTROL		(0x32)
-#define REG_OUTPUT_FORMATTER1		(0x33)
-#define REG_OUTPUT_FORMATTER2		(0x34)
-#define REG_OUTPUT_FORMATTER3		(0x35)
-#define REG_OUTPUT_FORMATTER4		(0x36)
-#define REG_OUTPUT_FORMATTER5		(0x37)
-#define REG_OUTPUT_FORMATTER6		(0x38)
-#define REG_CLEAR_LOST_LOCK		(0x39)
-
-#define REG_STATUS1			(0x3A)
-#define REG_STATUS2			(0x3B)
-
-#define REG_AGC_GAIN_STATUS_LSB		(0x3C)
-#define REG_AGC_GAIN_STATUS_MSB		(0x3D)
-
-/* 0x3E Reserved */
-
-#define REG_VIDEO_STD_STATUS		(0x3F)
-#define REG_GPIO_INPUT1			(0x40)
-#define REG_GPIO_INPUT2			(0x41)
-
-/* 0x42 - 0x45 Reserved */
-
-#define REG_AFE_COARSE_GAIN_CH1		(0x46)
-#define REG_AFE_COARSE_GAIN_CH2		(0x47)
-#define REG_AFE_COARSE_GAIN_CH3		(0x48)
-#define REG_AFE_COARSE_GAIN_CH4		(0x49)
-
-#define REG_AFE_FINE_GAIN_PB_B_LSB	(0x4A)
-#define REG_AFE_FINE_GAIN_PB_B_MSB	(0x4B)
-#define REG_AFE_FINE_GAIN_Y_G_CHROMA_LSB	(0x4C)
-#define REG_AFE_FINE_GAIN_Y_G_CHROMA_MSB	(0x4D)
-#define REG_AFE_FINE_GAIN_PR_R_LSB	(0x4E)
-#define REG_AFE_FINE_GAIN_PR_R_MSB	(0x4F)
-#define REG_AFE_FINE_GAIN_CVBS_LUMA_LSB	(0x50)
-#define REG_AFE_FINE_GAIN_CVBS_LUMA_MSB	(0x51)
-
-/* 0x52 - 0x68 Reserved */
-
-#define REG_FBIT_VBIT_CONTROL1		(0x69)
-
-/* 0x6A - 0x6B Reserved */
-
-#define REG_BACKEND_AGC_CONTROL		(0x6C)
-
-/* 0x6D - 0x6E Reserved */
-
-#define REG_AGC_DECREMENT_SPEED_CONTROL	(0x6F)
-#define REG_ROM_VERSION			(0x70)
-
-/* 0x71 - 0x73 Reserved */
-
-#define REG_AGC_WHITE_PEAK_PROCESSING	(0x74)
-#define REG_FBIT_VBIT_CONTROL2		(0x75)
-#define REG_VCR_TRICK_MODE_CONTROL	(0x76)
-#define REG_HORIZONTAL_SHAKE_INCREMENT	(0x77)
-#define REG_AGC_INCREMENT_SPEED		(0x78)
-#define REG_AGC_INCREMENT_DELAY		(0x79)
-
-/* 0x7A - 0x7F Reserved */
-
-#define REG_CHIP_ID_MSB			(0x80)
-#define REG_CHIP_ID_LSB			(0x81)
-
-/* 0x82 Reserved */
-
-#define REG_CPLL_SPEED_CONTROL		(0x83)
-
-/* 0x84 - 0x96 Reserved */
-
-#define REG_STATUS_REQUEST		(0x97)
-
-/* 0x98 - 0x99 Reserved */
-
-#define REG_VERTICAL_LINE_COUNT_LSB	(0x9A)
-#define REG_VERTICAL_LINE_COUNT_MSB	(0x9B)
-
-/* 0x9C - 0x9D Reserved */
-
-#define REG_AGC_DECREMENT_DELAY		(0x9E)
-
-/* 0x9F - 0xB0 Reserved */
-
-#define REG_VDP_TTX_FILTER_1_MASK1	(0xB1)
-#define REG_VDP_TTX_FILTER_1_MASK2	(0xB2)
-#define REG_VDP_TTX_FILTER_1_MASK3	(0xB3)
-#define REG_VDP_TTX_FILTER_1_MASK4	(0xB4)
-#define REG_VDP_TTX_FILTER_1_MASK5	(0xB5)
-#define REG_VDP_TTX_FILTER_2_MASK1	(0xB6)
-#define REG_VDP_TTX_FILTER_2_MASK2	(0xB7)
-#define REG_VDP_TTX_FILTER_2_MASK3	(0xB8)
-#define REG_VDP_TTX_FILTER_2_MASK4	(0xB9)
-#define REG_VDP_TTX_FILTER_2_MASK5	(0xBA)
-#define REG_VDP_TTX_FILTER_CONTROL	(0xBB)
-#define REG_VDP_FIFO_WORD_COUNT		(0xBC)
-#define REG_VDP_FIFO_INTERRUPT_THRLD	(0xBD)
-
-/* 0xBE Reserved */
-
-#define REG_VDP_FIFO_RESET		(0xBF)
-#define REG_VDP_FIFO_OUTPUT_CONTROL	(0xC0)
-#define REG_VDP_LINE_NUMBER_INTERRUPT	(0xC1)
-#define REG_VDP_PIXEL_ALIGNMENT_LSB	(0xC2)
-#define REG_VDP_PIXEL_ALIGNMENT_MSB	(0xC3)
-
-/* 0xC4 - 0xD5 Reserved */
-
-#define REG_VDP_LINE_START		(0xD6)
-#define REG_VDP_LINE_STOP		(0xD7)
-#define REG_VDP_GLOBAL_LINE_MODE	(0xD8)
-#define REG_VDP_FULL_FIELD_ENABLE	(0xD9)
-#define REG_VDP_FULL_FIELD_MODE		(0xDA)
-
-/* 0xDB - 0xDF Reserved */
-
-#define REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR	(0xE0)
-#define REG_VBUS_DATA_ACCESS_VBUS_ADDR_INCR	(0xE1)
-#define REG_FIFO_READ_DATA			(0xE2)
-
-/* 0xE3 - 0xE7 Reserved */
-
-#define REG_VBUS_ADDRESS_ACCESS1	(0xE8)
-#define REG_VBUS_ADDRESS_ACCESS2	(0xE9)
-#define REG_VBUS_ADDRESS_ACCESS3	(0xEA)
-
-/* 0xEB - 0xEF Reserved */
-
-#define REG_INTERRUPT_RAW_STATUS0	(0xF0)
-#define REG_INTERRUPT_RAW_STATUS1	(0xF1)
-#define REG_INTERRUPT_STATUS0		(0xF2)
-#define REG_INTERRUPT_STATUS1		(0xF3)
-#define REG_INTERRUPT_MASK0		(0xF4)
-#define REG_INTERRUPT_MASK1		(0xF5)
-#define REG_INTERRUPT_CLEAR0		(0xF6)
-#define REG_INTERRUPT_CLEAR1		(0xF7)
-
-/* 0xF8 - 0xFF Reserved */
-
-/*
- * Mask and bit definitions of TVP5146/47 registers
- */
-/* The ID values we are looking for */
-#define TVP514X_CHIP_ID_MSB		(0x51)
-#define TVP5146_CHIP_ID_LSB		(0x46)
-#define TVP5147_CHIP_ID_LSB		(0x47)
-
-#define VIDEO_STD_MASK			(0x07)
-#define VIDEO_STD_AUTO_SWITCH_BIT	(0x00)
-#define VIDEO_STD_NTSC_MJ_BIT		(0x01)
-#define VIDEO_STD_PAL_BDGHIN_BIT	(0x02)
-#define VIDEO_STD_PAL_M_BIT		(0x03)
-#define VIDEO_STD_PAL_COMBINATION_N_BIT	(0x04)
-#define VIDEO_STD_NTSC_4_43_BIT		(0x05)
-#define VIDEO_STD_SECAM_BIT		(0x06)
-#define VIDEO_STD_PAL_60_BIT		(0x07)
-
-/*
- * Status bit
- */
-#define STATUS_TV_VCR_BIT		(1<<0)
-#define STATUS_HORZ_SYNC_LOCK_BIT	(1<<1)
-#define STATUS_VIRT_SYNC_LOCK_BIT	(1<<2)
-#define STATUS_CLR_SUBCAR_LOCK_BIT	(1<<3)
-#define STATUS_LOST_LOCK_DETECT_BIT	(1<<4)
-#define STATUS_FEILD_RATE_BIT		(1<<5)
-#define STATUS_LINE_ALTERNATING_BIT	(1<<6)
-#define STATUS_PEAK_WHITE_DETECT_BIT	(1<<7)
-
-/* Tokens for register write */
-#define TOK_WRITE                       (0)     /* token for write operation */
-#define TOK_TERM                        (1)     /* terminating token */
-#define TOK_DELAY                       (2)     /* delay token for reg list */
-#define TOK_SKIP                        (3)     /* token to skip a register */
-/**
- * struct tvp514x_reg - Structure for TVP5146/47 register initialization values
- * @token - Token: TOK_WRITE, TOK_TERM etc..
- * @reg - Register offset
- * @val - Register Value for TOK_WRITE or delay in ms for TOK_DELAY
- */
-struct tvp514x_reg {
-	u8 token;
-	u8 reg;
-	u32 val;
-};
-
-#endif				/* ifndef _TVP514X_REGS_H */
diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c
deleted file mode 100644
index a751b6c..0000000
--- a/drivers/media/video/tvp5150.c
+++ /dev/null
@@ -1,1274 +0,0 @@
-/*
- * tvp5150 - Texas Instruments TVP5150A/AM1 video decoder driver
- *
- * Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org)
- * This code is placed under the terms of the GNU General Public License v2
- */
-
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/videodev2.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <media/v4l2-device.h>
-#include <media/tvp5150.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-ctrls.h>
-
-#include "tvp5150_reg.h"
-
-#define TVP5150_H_MAX		720
-#define TVP5150_V_MAX_525_60	480
-#define TVP5150_V_MAX_OTHERS	576
-#define TVP5150_MAX_CROP_LEFT	511
-#define TVP5150_MAX_CROP_TOP	127
-#define TVP5150_CROP_SHIFT	2
-
-MODULE_DESCRIPTION("Texas Instruments TVP5150A video decoder driver");
-MODULE_AUTHOR("Mauro Carvalho Chehab");
-MODULE_LICENSE("GPL");
-
-
-static int debug;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level (0-2)");
-
-struct tvp5150 {
-	struct v4l2_subdev sd;
-	struct v4l2_ctrl_handler hdl;
-	struct v4l2_rect rect;
-
-	v4l2_std_id norm;	/* Current set standard */
-	u32 input;
-	u32 output;
-	int enable;
-};
-
-static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct tvp5150, sd);
-}
-
-static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
-{
-	return &container_of(ctrl->handler, struct tvp5150, hdl)->sd;
-}
-
-static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr)
-{
-	struct i2c_client *c = v4l2_get_subdevdata(sd);
-	unsigned char buffer[1];
-	int rc;
-
-	buffer[0] = addr;
-
-	rc = i2c_master_send(c, buffer, 1);
-	if (rc < 0) {
-		v4l2_err(sd, "i2c i/o error: rc == %d (should be 1)\n", rc);
-		return rc;
-	}
-
-	msleep(10);
-
-	rc = i2c_master_recv(c, buffer, 1);
-	if (rc < 0) {
-		v4l2_err(sd, "i2c i/o error: rc == %d (should be 1)\n", rc);
-		return rc;
-	}
-
-	v4l2_dbg(2, debug, sd, "tvp5150: read 0x%02x = 0x%02x\n", addr, buffer[0]);
-
-	return (buffer[0]);
-}
-
-static inline void tvp5150_write(struct v4l2_subdev *sd, unsigned char addr,
-				 unsigned char value)
-{
-	struct i2c_client *c = v4l2_get_subdevdata(sd);
-	unsigned char buffer[2];
-	int rc;
-
-	buffer[0] = addr;
-	buffer[1] = value;
-	v4l2_dbg(2, debug, sd, "tvp5150: writing 0x%02x 0x%02x\n", buffer[0], buffer[1]);
-	if (2 != (rc = i2c_master_send(c, buffer, 2)))
-		v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 2)\n", rc);
-}
-
-static void dump_reg_range(struct v4l2_subdev *sd, char *s, u8 init,
-				const u8 end, int max_line)
-{
-	int i = 0;
-
-	while (init != (u8)(end + 1)) {
-		if ((i % max_line) == 0) {
-			if (i > 0)
-				printk("\n");
-			printk("tvp5150: %s reg 0x%02x = ", s, init);
-		}
-		printk("%02x ", tvp5150_read(sd, init));
-
-		init++;
-		i++;
-	}
-	printk("\n");
-}
-
-static int tvp5150_log_status(struct v4l2_subdev *sd)
-{
-	printk("tvp5150: Video input source selection #1 = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_VD_IN_SRC_SEL_1));
-	printk("tvp5150: Analog channel controls = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_ANAL_CHL_CTL));
-	printk("tvp5150: Operation mode controls = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_OP_MODE_CTL));
-	printk("tvp5150: Miscellaneous controls = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_MISC_CTL));
-	printk("tvp5150: Autoswitch mask= 0x%02x\n",
-			tvp5150_read(sd, TVP5150_AUTOSW_MSK));
-	printk("tvp5150: Color killer threshold control = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_COLOR_KIL_THSH_CTL));
-	printk("tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n",
-			tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_1),
-			tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_2),
-			tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_3));
-	printk("tvp5150: Brightness control = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_BRIGHT_CTL));
-	printk("tvp5150: Color saturation control = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_SATURATION_CTL));
-	printk("tvp5150: Hue control = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_HUE_CTL));
-	printk("tvp5150: Contrast control = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_CONTRAST_CTL));
-	printk("tvp5150: Outputs and data rates select = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_DATA_RATE_SEL));
-	printk("tvp5150: Configuration shared pins = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_CONF_SHARED_PIN));
-	printk("tvp5150: Active video cropping start = 0x%02x%02x\n",
-			tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_MSB),
-			tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_LSB));
-	printk("tvp5150: Active video cropping stop  = 0x%02x%02x\n",
-			tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_MSB),
-			tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_LSB));
-	printk("tvp5150: Genlock/RTC = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_GENLOCK));
-	printk("tvp5150: Horizontal sync start = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_HORIZ_SYNC_START));
-	printk("tvp5150: Vertical blanking start = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_VERT_BLANKING_START));
-	printk("tvp5150: Vertical blanking stop = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_VERT_BLANKING_STOP));
-	printk("tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n",
-			tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_1),
-			tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_2));
-	printk("tvp5150: Interrupt reset register B = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_INT_RESET_REG_B));
-	printk("tvp5150: Interrupt enable register B = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_INT_ENABLE_REG_B));
-	printk("tvp5150: Interrupt configuration register B = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_INTT_CONFIG_REG_B));
-	printk("tvp5150: Video standard = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_VIDEO_STD));
-	printk("tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n",
-			tvp5150_read(sd, TVP5150_CB_GAIN_FACT),
-			tvp5150_read(sd, TVP5150_CR_GAIN_FACTOR));
-	printk("tvp5150: Macrovision on counter = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_MACROVISION_ON_CTR));
-	printk("tvp5150: Macrovision off counter = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_MACROVISION_OFF_CTR));
-	printk("tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n",
-			(tvp5150_read(sd, TVP5150_REV_SELECT) & 1) ? 3 : 4);
-	printk("tvp5150: Device ID = %02x%02x\n",
-			tvp5150_read(sd, TVP5150_MSB_DEV_ID),
-			tvp5150_read(sd, TVP5150_LSB_DEV_ID));
-	printk("tvp5150: ROM version = (hex) %02x.%02x\n",
-			tvp5150_read(sd, TVP5150_ROM_MAJOR_VER),
-			tvp5150_read(sd, TVP5150_ROM_MINOR_VER));
-	printk("tvp5150: Vertical line count = 0x%02x%02x\n",
-			tvp5150_read(sd, TVP5150_VERT_LN_COUNT_MSB),
-			tvp5150_read(sd, TVP5150_VERT_LN_COUNT_LSB));
-	printk("tvp5150: Interrupt status register B = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_INT_STATUS_REG_B));
-	printk("tvp5150: Interrupt active register B = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_INT_ACTIVE_REG_B));
-	printk("tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n",
-			tvp5150_read(sd, TVP5150_STATUS_REG_1),
-			tvp5150_read(sd, TVP5150_STATUS_REG_2),
-			tvp5150_read(sd, TVP5150_STATUS_REG_3),
-			tvp5150_read(sd, TVP5150_STATUS_REG_4),
-			tvp5150_read(sd, TVP5150_STATUS_REG_5));
-
-	dump_reg_range(sd, "Teletext filter 1",   TVP5150_TELETEXT_FIL1_INI,
-			TVP5150_TELETEXT_FIL1_END, 8);
-	dump_reg_range(sd, "Teletext filter 2",   TVP5150_TELETEXT_FIL2_INI,
-			TVP5150_TELETEXT_FIL2_END, 8);
-
-	printk("tvp5150: Teletext filter enable = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_TELETEXT_FIL_ENA));
-	printk("tvp5150: Interrupt status register A = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_INT_STATUS_REG_A));
-	printk("tvp5150: Interrupt enable register A = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_INT_ENABLE_REG_A));
-	printk("tvp5150: Interrupt configuration = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_INT_CONF));
-	printk("tvp5150: VDP status register = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_VDP_STATUS_REG));
-	printk("tvp5150: FIFO word count = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_FIFO_WORD_COUNT));
-	printk("tvp5150: FIFO interrupt threshold = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_FIFO_INT_THRESHOLD));
-	printk("tvp5150: FIFO reset = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_FIFO_RESET));
-	printk("tvp5150: Line number interrupt = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_LINE_NUMBER_INT));
-	printk("tvp5150: Pixel alignment register = 0x%02x%02x\n",
-			tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_HIGH),
-			tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_LOW));
-	printk("tvp5150: FIFO output control = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_FIFO_OUT_CTRL));
-	printk("tvp5150: Full field enable = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_FULL_FIELD_ENA));
-	printk("tvp5150: Full field mode register = 0x%02x\n",
-			tvp5150_read(sd, TVP5150_FULL_FIELD_MODE_REG));
-
-	dump_reg_range(sd, "CC   data",   TVP5150_CC_DATA_INI,
-			TVP5150_CC_DATA_END, 8);
-
-	dump_reg_range(sd, "WSS  data",   TVP5150_WSS_DATA_INI,
-			TVP5150_WSS_DATA_END, 8);
-
-	dump_reg_range(sd, "VPS  data",   TVP5150_VPS_DATA_INI,
-			TVP5150_VPS_DATA_END, 8);
-
-	dump_reg_range(sd, "VITC data",   TVP5150_VITC_DATA_INI,
-			TVP5150_VITC_DATA_END, 10);
-
-	dump_reg_range(sd, "Line mode",   TVP5150_LINE_MODE_INI,
-			TVP5150_LINE_MODE_END, 8);
-	return 0;
-}
-
-/****************************************************************************
-			Basic functions
- ****************************************************************************/
-
-static inline void tvp5150_selmux(struct v4l2_subdev *sd)
-{
-	int opmode = 0;
-	struct tvp5150 *decoder = to_tvp5150(sd);
-	int input = 0;
-	int val;
-
-	if ((decoder->output & TVP5150_BLACK_SCREEN) || !decoder->enable)
-		input = 8;
-
-	switch (decoder->input) {
-	case TVP5150_COMPOSITE1:
-		input |= 2;
-		/* fall through */
-	case TVP5150_COMPOSITE0:
-		break;
-	case TVP5150_SVIDEO:
-	default:
-		input |= 1;
-		break;
-	}
-
-	v4l2_dbg(1, debug, sd, "Selecting video route: route input=%i, output=%i "
-			"=> tvp5150 input=%i, opmode=%i\n",
-			decoder->input, decoder->output,
-			input, opmode);
-
-	tvp5150_write(sd, TVP5150_OP_MODE_CTL, opmode);
-	tvp5150_write(sd, TVP5150_VD_IN_SRC_SEL_1, input);
-
-	/* Svideo should enable YCrCb output and disable GPCL output
-	 * For Composite and TV, it should be the reverse
-	 */
-	val = tvp5150_read(sd, TVP5150_MISC_CTL);
-	if (val < 0) {
-		v4l2_err(sd, "%s: failed with error = %d\n", __func__, val);
-		return;
-	}
-
-	if (decoder->input == TVP5150_SVIDEO)
-		val = (val & ~0x40) | 0x10;
-	else
-		val = (val & ~0x10) | 0x40;
-	tvp5150_write(sd, TVP5150_MISC_CTL, val);
-};
-
-struct i2c_reg_value {
-	unsigned char reg;
-	unsigned char value;
-};
-
-/* Default values as sugested at TVP5150AM1 datasheet */
-static const struct i2c_reg_value tvp5150_init_default[] = {
-	{ /* 0x00 */
-		TVP5150_VD_IN_SRC_SEL_1,0x00
-	},
-	{ /* 0x01 */
-		TVP5150_ANAL_CHL_CTL,0x15
-	},
-	{ /* 0x02 */
-		TVP5150_OP_MODE_CTL,0x00
-	},
-	{ /* 0x03 */
-		TVP5150_MISC_CTL,0x01
-	},
-	{ /* 0x06 */
-		TVP5150_COLOR_KIL_THSH_CTL,0x10
-	},
-	{ /* 0x07 */
-		TVP5150_LUMA_PROC_CTL_1,0x60
-	},
-	{ /* 0x08 */
-		TVP5150_LUMA_PROC_CTL_2,0x00
-	},
-	{ /* 0x09 */
-		TVP5150_BRIGHT_CTL,0x80
-	},
-	{ /* 0x0a */
-		TVP5150_SATURATION_CTL,0x80
-	},
-	{ /* 0x0b */
-		TVP5150_HUE_CTL,0x00
-	},
-	{ /* 0x0c */
-		TVP5150_CONTRAST_CTL,0x80
-	},
-	{ /* 0x0d */
-		TVP5150_DATA_RATE_SEL,0x47
-	},
-	{ /* 0x0e */
-		TVP5150_LUMA_PROC_CTL_3,0x00
-	},
-	{ /* 0x0f */
-		TVP5150_CONF_SHARED_PIN,0x08
-	},
-	{ /* 0x11 */
-		TVP5150_ACT_VD_CROP_ST_MSB,0x00
-	},
-	{ /* 0x12 */
-		TVP5150_ACT_VD_CROP_ST_LSB,0x00
-	},
-	{ /* 0x13 */
-		TVP5150_ACT_VD_CROP_STP_MSB,0x00
-	},
-	{ /* 0x14 */
-		TVP5150_ACT_VD_CROP_STP_LSB,0x00
-	},
-	{ /* 0x15 */
-		TVP5150_GENLOCK,0x01
-	},
-	{ /* 0x16 */
-		TVP5150_HORIZ_SYNC_START,0x80
-	},
-	{ /* 0x18 */
-		TVP5150_VERT_BLANKING_START,0x00
-	},
-	{ /* 0x19 */
-		TVP5150_VERT_BLANKING_STOP,0x00
-	},
-	{ /* 0x1a */
-		TVP5150_CHROMA_PROC_CTL_1,0x0c
-	},
-	{ /* 0x1b */
-		TVP5150_CHROMA_PROC_CTL_2,0x14
-	},
-	{ /* 0x1c */
-		TVP5150_INT_RESET_REG_B,0x00
-	},
-	{ /* 0x1d */
-		TVP5150_INT_ENABLE_REG_B,0x00
-	},
-	{ /* 0x1e */
-		TVP5150_INTT_CONFIG_REG_B,0x00
-	},
-	{ /* 0x28 */
-		TVP5150_VIDEO_STD,0x00
-	},
-	{ /* 0x2e */
-		TVP5150_MACROVISION_ON_CTR,0x0f
-	},
-	{ /* 0x2f */
-		TVP5150_MACROVISION_OFF_CTR,0x01
-	},
-	{ /* 0xbb */
-		TVP5150_TELETEXT_FIL_ENA,0x00
-	},
-	{ /* 0xc0 */
-		TVP5150_INT_STATUS_REG_A,0x00
-	},
-	{ /* 0xc1 */
-		TVP5150_INT_ENABLE_REG_A,0x00
-	},
-	{ /* 0xc2 */
-		TVP5150_INT_CONF,0x04
-	},
-	{ /* 0xc8 */
-		TVP5150_FIFO_INT_THRESHOLD,0x80
-	},
-	{ /* 0xc9 */
-		TVP5150_FIFO_RESET,0x00
-	},
-	{ /* 0xca */
-		TVP5150_LINE_NUMBER_INT,0x00
-	},
-	{ /* 0xcb */
-		TVP5150_PIX_ALIGN_REG_LOW,0x4e
-	},
-	{ /* 0xcc */
-		TVP5150_PIX_ALIGN_REG_HIGH,0x00
-	},
-	{ /* 0xcd */
-		TVP5150_FIFO_OUT_CTRL,0x01
-	},
-	{ /* 0xcf */
-		TVP5150_FULL_FIELD_ENA,0x00
-	},
-	{ /* 0xd0 */
-		TVP5150_LINE_MODE_INI,0x00
-	},
-	{ /* 0xfc */
-		TVP5150_FULL_FIELD_MODE_REG,0x7f
-	},
-	{ /* end of data */
-		0xff,0xff
-	}
-};
-
-/* Default values as sugested at TVP5150AM1 datasheet */
-static const struct i2c_reg_value tvp5150_init_enable[] = {
-	{
-		TVP5150_CONF_SHARED_PIN, 2
-	},{	/* Automatic offset and AGC enabled */
-		TVP5150_ANAL_CHL_CTL, 0x15
-	},{	/* Activate YCrCb output 0x9 or 0xd ? */
-		TVP5150_MISC_CTL, 0x6f
-	},{	/* Activates video std autodetection for all standards */
-		TVP5150_AUTOSW_MSK, 0x0
-	},{	/* Default format: 0x47. For 4:2:2: 0x40 */
-		TVP5150_DATA_RATE_SEL, 0x47
-	},{
-		TVP5150_CHROMA_PROC_CTL_1, 0x0c
-	},{
-		TVP5150_CHROMA_PROC_CTL_2, 0x54
-	},{	/* Non documented, but initialized on WinTV USB2 */
-		0x27, 0x20
-	},{
-		0xff,0xff
-	}
-};
-
-struct tvp5150_vbi_type {
-	unsigned int vbi_type;
-	unsigned int ini_line;
-	unsigned int end_line;
-	unsigned int by_field :1;
-};
-
-struct i2c_vbi_ram_value {
-	u16 reg;
-	struct tvp5150_vbi_type type;
-	unsigned char values[16];
-};
-
-/* This struct have the values for each supported VBI Standard
- * by
- tvp5150_vbi_types should follow the same order as vbi_ram_default
- * value 0 means rom position 0x10, value 1 means rom position 0x30
- * and so on. There are 16 possible locations from 0 to 15.
- */
-
-static struct i2c_vbi_ram_value vbi_ram_default[] =
-{
-	/* FIXME: Current api doesn't handle all VBI types, those not
-	   yet supported are placed under #if 0 */
-#if 0
-	{0x010, /* Teletext, SECAM, WST System A */
-		{V4L2_SLICED_TELETEXT_SECAM,6,23,1},
-		{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26,
-		  0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 }
-	},
-#endif
-	{0x030, /* Teletext, PAL, WST System B */
-		{V4L2_SLICED_TELETEXT_B,6,22,1},
-		{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b,
-		  0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 }
-	},
-#if 0
-	{0x050, /* Teletext, PAL, WST System C */
-		{V4L2_SLICED_TELETEXT_PAL_C,6,22,1},
-		{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
-		  0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
-	},
-	{0x070, /* Teletext, NTSC, WST System B */
-		{V4L2_SLICED_TELETEXT_NTSC_B,10,21,1},
-		{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23,
-		  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
-	},
-	{0x090, /* Tetetext, NTSC NABTS System C */
-		{V4L2_SLICED_TELETEXT_NTSC_C,10,21,1},
-		{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
-		  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 }
-	},
-	{0x0b0, /* Teletext, NTSC-J, NABTS System D */
-		{V4L2_SLICED_TELETEXT_NTSC_D,10,21,1},
-		{ 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23,
-		  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
-	},
-	{0x0d0, /* Closed Caption, PAL/SECAM */
-		{V4L2_SLICED_CAPTION_625,22,22,1},
-		{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
-		  0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
-	},
-#endif
-	{0x0f0, /* Closed Caption, NTSC */
-		{V4L2_SLICED_CAPTION_525,21,21,1},
-		{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
-		  0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
-	},
-	{0x110, /* Wide Screen Signal, PAL/SECAM */
-		{V4L2_SLICED_WSS_625,23,23,1},
-		{ 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42,
-		  0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 }
-	},
-#if 0
-	{0x130, /* Wide Screen Signal, NTSC C */
-		{V4L2_SLICED_WSS_525,20,20,1},
-		{ 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43,
-		  0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 }
-	},
-	{0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */
-		{V4l2_SLICED_VITC_625,6,22,0},
-		{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
-		  0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
-	},
-	{0x170, /* Vertical Interval Timecode (VITC), NTSC */
-		{V4l2_SLICED_VITC_525,10,20,0},
-		{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
-		  0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
-	},
-#endif
-	{0x190, /* Video Program System (VPS), PAL */
-		{V4L2_SLICED_VPS,16,16,0},
-		{ 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d,
-		  0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 }
-	},
-	/* 0x1d0 User programmable */
-
-	/* End of struct */
-	{ (u16)-1 }
-};
-
-static int tvp5150_write_inittab(struct v4l2_subdev *sd,
-				const struct i2c_reg_value *regs)
-{
-	while (regs->reg != 0xff) {
-		tvp5150_write(sd, regs->reg, regs->value);
-		regs++;
-	}
-	return 0;
-}
-
-static int tvp5150_vdp_init(struct v4l2_subdev *sd,
-				const struct i2c_vbi_ram_value *regs)
-{
-	unsigned int i;
-
-	/* Disable Full Field */
-	tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
-
-	/* Before programming, Line mode should be at 0xff */
-	for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
-		tvp5150_write(sd, i, 0xff);
-
-	/* Load Ram Table */
-	while (regs->reg != (u16)-1) {
-		tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_HIGH, regs->reg >> 8);
-		tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_LOW, regs->reg);
-
-		for (i = 0; i < 16; i++)
-			tvp5150_write(sd, TVP5150_VDP_CONF_RAM_DATA, regs->values[i]);
-
-		regs++;
-	}
-	return 0;
-}
-
-/* Fills VBI capabilities based on i2c_vbi_ram_value struct */
-static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,
-				struct v4l2_sliced_vbi_cap *cap)
-{
-	const struct i2c_vbi_ram_value *regs = vbi_ram_default;
-	int line;
-
-	v4l2_dbg(1, debug, sd, "g_sliced_vbi_cap\n");
-	memset(cap, 0, sizeof *cap);
-
-	while (regs->reg != (u16)-1 ) {
-		for (line=regs->type.ini_line;line<=regs->type.end_line;line++) {
-			cap->service_lines[0][line] |= regs->type.vbi_type;
-		}
-		cap->service_set |= regs->type.vbi_type;
-
-		regs++;
-	}
-	return 0;
-}
-
-/* Set vbi processing
- * type - one of tvp5150_vbi_types
- * line - line to gather data
- * fields: bit 0 field1, bit 1, field2
- * flags (default=0xf0) is a bitmask, were set means:
- *	bit 7: enable filtering null bytes on CC
- *	bit 6: send data also to FIFO
- *	bit 5: don't allow data with errors on FIFO
- *	bit 4: enable ECC when possible
- * pix_align = pix alignment:
- *	LSB = field1
- *	MSB = field2
- */
-static int tvp5150_set_vbi(struct v4l2_subdev *sd,
-			const struct i2c_vbi_ram_value *regs,
-			unsigned int type,u8 flags, int line,
-			const int fields)
-{
-	struct tvp5150 *decoder = to_tvp5150(sd);
-	v4l2_std_id std = decoder->norm;
-	u8 reg;
-	int pos=0;
-
-	if (std == V4L2_STD_ALL) {
-		v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
-		return 0;
-	} else if (std & V4L2_STD_625_50) {
-		/* Don't follow NTSC Line number convension */
-		line += 3;
-	}
-
-	if (line<6||line>27)
-		return 0;
-
-	while (regs->reg != (u16)-1 ) {
-		if ((type & regs->type.vbi_type) &&
-		    (line>=regs->type.ini_line) &&
-		    (line<=regs->type.end_line)) {
-			type=regs->type.vbi_type;
-			break;
-		}
-
-		regs++;
-		pos++;
-	}
-	if (regs->reg == (u16)-1)
-		return 0;
-
-	type=pos | (flags & 0xf0);
-	reg=((line-6)<<1)+TVP5150_LINE_MODE_INI;
-
-	if (fields&1) {
-		tvp5150_write(sd, reg, type);
-	}
-
-	if (fields&2) {
-		tvp5150_write(sd, reg+1, type);
-	}
-
-	return type;
-}
-
-static int tvp5150_get_vbi(struct v4l2_subdev *sd,
-			const struct i2c_vbi_ram_value *regs, int line)
-{
-	struct tvp5150 *decoder = to_tvp5150(sd);
-	v4l2_std_id std = decoder->norm;
-	u8 reg;
-	int pos, type = 0;
-	int i, ret = 0;
-
-	if (std == V4L2_STD_ALL) {
-		v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
-		return 0;
-	} else if (std & V4L2_STD_625_50) {
-		/* Don't follow NTSC Line number convension */
-		line += 3;
-	}
-
-	if (line < 6 || line > 27)
-		return 0;
-
-	reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI;
-
-	for (i = 0; i <= 1; i++) {
-		ret = tvp5150_read(sd, reg + i);
-		if (ret < 0) {
-			v4l2_err(sd, "%s: failed with error = %d\n",
-				 __func__, ret);
-			return 0;
-		}
-		pos = ret & 0x0f;
-		if (pos < 0x0f)
-			type |= regs[pos].type.vbi_type;
-	}
-
-	return type;
-}
-
-static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct tvp5150 *decoder = to_tvp5150(sd);
-	int fmt = 0;
-
-	decoder->norm = std;
-
-	/* First tests should be against specific std */
-
-	if (std == V4L2_STD_ALL) {
-		fmt = VIDEO_STD_AUTO_SWITCH_BIT;	/* Autodetect mode */
-	} else if (std & V4L2_STD_NTSC_443) {
-		fmt = VIDEO_STD_NTSC_4_43_BIT;
-	} else if (std & V4L2_STD_PAL_M) {
-		fmt = VIDEO_STD_PAL_M_BIT;
-	} else if (std & (V4L2_STD_PAL_N | V4L2_STD_PAL_Nc)) {
-		fmt = VIDEO_STD_PAL_COMBINATION_N_BIT;
-	} else {
-		/* Then, test against generic ones */
-		if (std & V4L2_STD_NTSC)
-			fmt = VIDEO_STD_NTSC_MJ_BIT;
-		else if (std & V4L2_STD_PAL)
-			fmt = VIDEO_STD_PAL_BDGHIN_BIT;
-		else if (std & V4L2_STD_SECAM)
-			fmt = VIDEO_STD_SECAM_BIT;
-	}
-
-	v4l2_dbg(1, debug, sd, "Set video std register to %d.\n", fmt);
-	tvp5150_write(sd, TVP5150_VIDEO_STD, fmt);
-	return 0;
-}
-
-static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct tvp5150 *decoder = to_tvp5150(sd);
-
-	if (decoder->norm == std)
-		return 0;
-
-	/* Change cropping height limits */
-	if (std & V4L2_STD_525_60)
-		decoder->rect.height = TVP5150_V_MAX_525_60;
-	else
-		decoder->rect.height = TVP5150_V_MAX_OTHERS;
-
-
-	return tvp5150_set_std(sd, std);
-}
-
-static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
-{
-	struct tvp5150 *decoder = to_tvp5150(sd);
-
-	/* Initializes TVP5150 to its default values */
-	tvp5150_write_inittab(sd, tvp5150_init_default);
-
-	/* Initializes VDP registers */
-	tvp5150_vdp_init(sd, vbi_ram_default);
-
-	/* Selects decoder input */
-	tvp5150_selmux(sd);
-
-	/* Initializes TVP5150 to stream enabled values */
-	tvp5150_write_inittab(sd, tvp5150_init_enable);
-
-	/* Initialize image preferences */
-	v4l2_ctrl_handler_setup(&decoder->hdl);
-
-	tvp5150_set_std(sd, decoder->norm);
-	return 0;
-};
-
-static int tvp5150_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		tvp5150_write(sd, TVP5150_BRIGHT_CTL, ctrl->val);
-		return 0;
-	case V4L2_CID_CONTRAST:
-		tvp5150_write(sd, TVP5150_CONTRAST_CTL, ctrl->val);
-		return 0;
-	case V4L2_CID_SATURATION:
-		tvp5150_write(sd, TVP5150_SATURATION_CTL, ctrl->val);
-		return 0;
-	case V4L2_CID_HUE:
-		tvp5150_write(sd, TVP5150_HUE_CTL, ctrl->val);
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static v4l2_std_id tvp5150_read_std(struct v4l2_subdev *sd)
-{
-	int val = tvp5150_read(sd, TVP5150_STATUS_REG_5);
-
-	switch (val & 0x0F) {
-	case 0x01:
-		return V4L2_STD_NTSC;
-	case 0x03:
-		return V4L2_STD_PAL;
-	case 0x05:
-		return V4L2_STD_PAL_M;
-	case 0x07:
-		return V4L2_STD_PAL_N | V4L2_STD_PAL_Nc;
-	case 0x09:
-		return V4L2_STD_NTSC_443;
-	case 0xb:
-		return V4L2_STD_SECAM;
-	default:
-		return V4L2_STD_UNKNOWN;
-	}
-}
-
-static int tvp5150_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
-						enum v4l2_mbus_pixelcode *code)
-{
-	if (index)
-		return -EINVAL;
-
-	*code = V4L2_MBUS_FMT_UYVY8_2X8;
-	return 0;
-}
-
-static int tvp5150_mbus_fmt(struct v4l2_subdev *sd,
-			    struct v4l2_mbus_framefmt *f)
-{
-	struct tvp5150 *decoder = to_tvp5150(sd);
-
-	if (f == NULL)
-		return -EINVAL;
-
-	tvp5150_reset(sd, 0);
-
-	f->width = decoder->rect.width;
-	f->height = decoder->rect.height;
-
-	f->code = V4L2_MBUS_FMT_UYVY8_2X8;
-	f->field = V4L2_FIELD_SEQ_TB;
-	f->colorspace = V4L2_COLORSPACE_SMPTE170M;
-
-	v4l2_dbg(1, debug, sd, "width = %d, height = %d\n", f->width,
-			f->height);
-	return 0;
-}
-
-static int tvp5150_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
-{
-	struct v4l2_rect rect = a->c;
-	struct tvp5150 *decoder = to_tvp5150(sd);
-	v4l2_std_id std;
-	int hmax;
-
-	v4l2_dbg(1, debug, sd, "%s left=%d, top=%d, width=%d, height=%d\n",
-		__func__, rect.left, rect.top, rect.width, rect.height);
-
-	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-
-	/* tvp5150 has some special limits */
-	rect.left = clamp(rect.left, 0, TVP5150_MAX_CROP_LEFT);
-	rect.width = clamp(rect.width,
-			   TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect.left,
-			   TVP5150_H_MAX - rect.left);
-	rect.top = clamp(rect.top, 0, TVP5150_MAX_CROP_TOP);
-
-	/* Calculate height based on current standard */
-	if (decoder->norm == V4L2_STD_ALL)
-		std = tvp5150_read_std(sd);
-	else
-		std = decoder->norm;
-
-	if (std & V4L2_STD_525_60)
-		hmax = TVP5150_V_MAX_525_60;
-	else
-		hmax = TVP5150_V_MAX_OTHERS;
-
-	rect.height = clamp(rect.height,
-			    hmax - TVP5150_MAX_CROP_TOP - rect.top,
-			    hmax - rect.top);
-
-	tvp5150_write(sd, TVP5150_VERT_BLANKING_START, rect.top);
-	tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP,
-		      rect.top + rect.height - hmax);
-	tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_MSB,
-		      rect.left >> TVP5150_CROP_SHIFT);
-	tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_LSB,
-		      rect.left | (1 << TVP5150_CROP_SHIFT));
-	tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_MSB,
-		      (rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >>
-		      TVP5150_CROP_SHIFT);
-	tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_LSB,
-		      rect.left + rect.width - TVP5150_MAX_CROP_LEFT);
-
-	decoder->rect = rect;
-
-	return 0;
-}
-
-static int tvp5150_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
-{
-	struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd);
-
-	a->c	= decoder->rect;
-	a->type	= V4L2_BUF_TYPE_VIDEO_CAPTURE;
-
-	return 0;
-}
-
-static int tvp5150_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
-{
-	struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd);
-	v4l2_std_id std;
-
-	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-
-	a->bounds.left			= 0;
-	a->bounds.top			= 0;
-	a->bounds.width			= TVP5150_H_MAX;
-
-	/* Calculate height based on current standard */
-	if (decoder->norm == V4L2_STD_ALL)
-		std = tvp5150_read_std(sd);
-	else
-		std = decoder->norm;
-
-	if (std & V4L2_STD_525_60)
-		a->bounds.height = TVP5150_V_MAX_525_60;
-	else
-		a->bounds.height = TVP5150_V_MAX_OTHERS;
-
-	a->defrect			= a->bounds;
-	a->pixelaspect.numerator	= 1;
-	a->pixelaspect.denominator	= 1;
-
-	return 0;
-}
-
-/****************************************************************************
-			I2C Command
- ****************************************************************************/
-
-static int tvp5150_s_routing(struct v4l2_subdev *sd,
-			     u32 input, u32 output, u32 config)
-{
-	struct tvp5150 *decoder = to_tvp5150(sd);
-
-	decoder->input = input;
-	decoder->output = output;
-	tvp5150_selmux(sd);
-	return 0;
-}
-
-static int tvp5150_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
-{
-	/* this is for capturing 36 raw vbi lines
-	   if there's a way to cut off the beginning 2 vbi lines
-	   with the tvp5150 then the vbi line count could be lowered
-	   to 17 lines/field again, although I couldn't find a register
-	   which could do that cropping */
-	if (fmt->sample_format == V4L2_PIX_FMT_GREY)
-		tvp5150_write(sd, TVP5150_LUMA_PROC_CTL_1, 0x70);
-	if (fmt->count[0] == 18 && fmt->count[1] == 18) {
-		tvp5150_write(sd, TVP5150_VERT_BLANKING_START, 0x00);
-		tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP, 0x01);
-	}
-	return 0;
-}
-
-static int tvp5150_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
-{
-	int i;
-
-	if (svbi->service_set != 0) {
-		for (i = 0; i <= 23; i++) {
-			svbi->service_lines[1][i] = 0;
-			svbi->service_lines[0][i] =
-				tvp5150_set_vbi(sd, vbi_ram_default,
-				       svbi->service_lines[0][i], 0xf0, i, 3);
-		}
-		/* Enables FIFO */
-		tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 1);
-	} else {
-		/* Disables FIFO*/
-		tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 0);
-
-		/* Disable Full Field */
-		tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
-
-		/* Disable Line modes */
-		for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
-			tvp5150_write(sd, i, 0xff);
-	}
-	return 0;
-}
-
-static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
-{
-	int i, mask = 0;
-
-	memset(svbi, 0, sizeof(*svbi));
-
-	for (i = 0; i <= 23; i++) {
-		svbi->service_lines[0][i] =
-			tvp5150_get_vbi(sd, vbi_ram_default, i);
-		mask |= svbi->service_lines[0][i];
-	}
-	svbi->service_set = mask;
-	return 0;
-}
-
-static int tvp5150_g_chip_ident(struct v4l2_subdev *sd,
-				struct v4l2_dbg_chip_ident *chip)
-{
-	int rev;
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	rev = tvp5150_read(sd, TVP5150_ROM_MAJOR_VER) << 8 |
-	      tvp5150_read(sd, TVP5150_ROM_MINOR_VER);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TVP5150,
-					  rev);
-}
-
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int tvp5150_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	int res;
-
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	res = tvp5150_read(sd, reg->reg & 0xff);
-	if (res < 0) {
-		v4l2_err(sd, "%s: failed with error = %d\n", __func__, res);
-		return res;
-	}
-
-	reg->val = res;
-	reg->size = 1;
-	return 0;
-}
-
-static int tvp5150_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	tvp5150_write(sd, reg->reg & 0xff, reg->val & 0xff);
-	return 0;
-}
-#endif
-
-static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
-{
-	int status = tvp5150_read(sd, 0x88);
-
-	vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0;
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = {
-	.s_ctrl = tvp5150_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops tvp5150_core_ops = {
-	.log_status = tvp5150_log_status,
-	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
-	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
-	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
-	.g_ctrl = v4l2_subdev_g_ctrl,
-	.s_ctrl = v4l2_subdev_s_ctrl,
-	.queryctrl = v4l2_subdev_queryctrl,
-	.querymenu = v4l2_subdev_querymenu,
-	.s_std = tvp5150_s_std,
-	.reset = tvp5150_reset,
-	.g_chip_ident = tvp5150_g_chip_ident,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.g_register = tvp5150_g_register,
-	.s_register = tvp5150_s_register,
-#endif
-};
-
-static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {
-	.g_tuner = tvp5150_g_tuner,
-};
-
-static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
-	.s_routing = tvp5150_s_routing,
-	.enum_mbus_fmt = tvp5150_enum_mbus_fmt,
-	.s_mbus_fmt = tvp5150_mbus_fmt,
-	.try_mbus_fmt = tvp5150_mbus_fmt,
-	.g_mbus_fmt = tvp5150_mbus_fmt,
-	.s_crop = tvp5150_s_crop,
-	.g_crop = tvp5150_g_crop,
-	.cropcap = tvp5150_cropcap,
-};
-
-static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = {
-	.g_sliced_vbi_cap = tvp5150_g_sliced_vbi_cap,
-	.g_sliced_fmt = tvp5150_g_sliced_fmt,
-	.s_sliced_fmt = tvp5150_s_sliced_fmt,
-	.s_raw_fmt = tvp5150_s_raw_fmt,
-};
-
-static const struct v4l2_subdev_ops tvp5150_ops = {
-	.core = &tvp5150_core_ops,
-	.tuner = &tvp5150_tuner_ops,
-	.video = &tvp5150_video_ops,
-	.vbi = &tvp5150_vbi_ops,
-};
-
-
-/****************************************************************************
-			I2C Client & Driver
- ****************************************************************************/
-
-static int tvp5150_probe(struct i2c_client *c,
-			 const struct i2c_device_id *id)
-{
-	struct tvp5150 *core;
-	struct v4l2_subdev *sd;
-	int tvp5150_id[4];
-	int i, res;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(c->adapter,
-	     I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
-		return -EIO;
-
-	core = kzalloc(sizeof(struct tvp5150), GFP_KERNEL);
-	if (!core) {
-		return -ENOMEM;
-	}
-	sd = &core->sd;
-	v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
-
-	/* 
-	 * Read consequent registers - TVP5150_MSB_DEV_ID, TVP5150_LSB_DEV_ID,
-	 * TVP5150_ROM_MAJOR_VER, TVP5150_ROM_MINOR_VER 
-	 */
-	for (i = 0; i < 4; i++) {
-		res = tvp5150_read(sd, TVP5150_MSB_DEV_ID + i);
-		if (res < 0)
-			goto free_core;
-		tvp5150_id[i] = res;
-	}
-
-	v4l_info(c, "chip found @ 0x%02x (%s)\n",
-		 c->addr << 1, c->adapter->name);
-
-	if (tvp5150_id[2] == 4 && tvp5150_id[3] == 0) { /* Is TVP5150AM1 */
-		v4l2_info(sd, "tvp%02x%02xam1 detected.\n",
-			  tvp5150_id[0], tvp5150_id[1]);
-
-		/* ITU-T BT.656.4 timing */
-		tvp5150_write(sd, TVP5150_REV_SELECT, 0);
-	} else {
-		/* Is TVP5150A */
-		if (tvp5150_id[2] == 3 || tvp5150_id[3] == 0x21) {
-			v4l2_info(sd, "tvp%02x%02xa detected.\n",
-				  tvp5150_id[2], tvp5150_id[3]);
-		} else {
-			v4l2_info(sd, "*** unknown tvp%02x%02x chip detected.\n",
-				  tvp5150_id[2], tvp5150_id[3]);
-			v4l2_info(sd, "*** Rom ver is %d.%d\n",
-				  tvp5150_id[2], tvp5150_id[3]);
-		}
-	}
-
-	core->norm = V4L2_STD_ALL;	/* Default is autodetect */
-	core->input = TVP5150_COMPOSITE1;
-	core->enable = 1;
-
-	v4l2_ctrl_handler_init(&core->hdl, 4);
-	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
-			V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
-	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
-			V4L2_CID_CONTRAST, 0, 255, 1, 128);
-	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
-			V4L2_CID_SATURATION, 0, 255, 1, 128);
-	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
-			V4L2_CID_HUE, -128, 127, 1, 0);
-	sd->ctrl_handler = &core->hdl;
-	if (core->hdl.error) {
-		res = core->hdl.error;
-		v4l2_ctrl_handler_free(&core->hdl);
-		goto free_core;
-	}
-	v4l2_ctrl_handler_setup(&core->hdl);
-
-	/* Default is no cropping */
-	core->rect.top = 0;
-	if (tvp5150_read_std(sd) & V4L2_STD_525_60)
-		core->rect.height = TVP5150_V_MAX_525_60;
-	else
-		core->rect.height = TVP5150_V_MAX_OTHERS;
-	core->rect.left = 0;
-	core->rect.width = TVP5150_H_MAX;
-
-	if (debug > 1)
-		tvp5150_log_status(sd);
-	return 0;
-
-free_core:
-	kfree(core);
-	return res;
-}
-
-static int tvp5150_remove(struct i2c_client *c)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(c);
-	struct tvp5150 *decoder = to_tvp5150(sd);
-
-	v4l2_dbg(1, debug, sd,
-		"tvp5150.c: removing tvp5150 adapter on address 0x%x\n",
-		c->addr << 1);
-
-	v4l2_device_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(&decoder->hdl);
-	kfree(to_tvp5150(sd));
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct i2c_device_id tvp5150_id[] = {
-	{ "tvp5150", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, tvp5150_id);
-
-static struct i2c_driver tvp5150_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "tvp5150",
-	},
-	.probe		= tvp5150_probe,
-	.remove		= tvp5150_remove,
-	.id_table	= tvp5150_id,
-};
-
-module_i2c_driver(tvp5150_driver);
diff --git a/drivers/media/video/tvp5150_reg.h b/drivers/media/video/tvp5150_reg.h
deleted file mode 100644
index 25a9949..0000000
--- a/drivers/media/video/tvp5150_reg.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * tvp5150 - Texas Instruments TVP5150A/AM1 video decoder registers
- *
- * Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org)
- * This code is placed under the terms of the GNU General Public License v2
- */
-
-#define TVP5150_VD_IN_SRC_SEL_1      0x00 /* Video input source selection #1 */
-#define TVP5150_ANAL_CHL_CTL         0x01 /* Analog channel controls */
-#define TVP5150_OP_MODE_CTL          0x02 /* Operation mode controls */
-#define TVP5150_MISC_CTL             0x03 /* Miscellaneous controls */
-#define TVP5150_AUTOSW_MSK           0x04 /* Autoswitch mask: TVP5150A / TVP5150AM */
-
-/* Reserved 05h */
-
-#define TVP5150_COLOR_KIL_THSH_CTL   0x06 /* Color killer threshold control */
-#define TVP5150_LUMA_PROC_CTL_1      0x07 /* Luminance processing control #1 */
-#define TVP5150_LUMA_PROC_CTL_2      0x08 /* Luminance processing control #2 */
-#define TVP5150_BRIGHT_CTL           0x09 /* Brightness control */
-#define TVP5150_SATURATION_CTL       0x0a /* Color saturation control */
-#define TVP5150_HUE_CTL              0x0b /* Hue control */
-#define TVP5150_CONTRAST_CTL         0x0c /* Contrast control */
-#define TVP5150_DATA_RATE_SEL        0x0d /* Outputs and data rates select */
-#define TVP5150_LUMA_PROC_CTL_3      0x0e /* Luminance processing control #3 */
-#define TVP5150_CONF_SHARED_PIN      0x0f /* Configuration shared pins */
-
-/* Reserved 10h */
-
-#define TVP5150_ACT_VD_CROP_ST_MSB   0x11 /* Active video cropping start MSB */
-#define TVP5150_ACT_VD_CROP_ST_LSB   0x12 /* Active video cropping start LSB */
-#define TVP5150_ACT_VD_CROP_STP_MSB  0x13 /* Active video cropping stop MSB */
-#define TVP5150_ACT_VD_CROP_STP_LSB  0x14 /* Active video cropping stop LSB */
-#define TVP5150_GENLOCK              0x15 /* Genlock/RTC */
-#define TVP5150_HORIZ_SYNC_START     0x16 /* Horizontal sync start */
-
-/* Reserved 17h */
-
-#define TVP5150_VERT_BLANKING_START 0x18 /* Vertical blanking start */
-#define TVP5150_VERT_BLANKING_STOP  0x19 /* Vertical blanking stop */
-#define TVP5150_CHROMA_PROC_CTL_1   0x1a /* Chrominance processing control #1 */
-#define TVP5150_CHROMA_PROC_CTL_2   0x1b /* Chrominance processing control #2 */
-#define TVP5150_INT_RESET_REG_B     0x1c /* Interrupt reset register B */
-#define TVP5150_INT_ENABLE_REG_B    0x1d /* Interrupt enable register B */
-#define TVP5150_INTT_CONFIG_REG_B   0x1e /* Interrupt configuration register B */
-
-/* Reserved 1Fh-27h */
-
-#define VIDEO_STD_MASK			 (0x07 >> 1)
-#define TVP5150_VIDEO_STD                0x28 /* Video standard */
-#define VIDEO_STD_AUTO_SWITCH_BIT	 0x00
-#define VIDEO_STD_NTSC_MJ_BIT		 0x02
-#define VIDEO_STD_PAL_BDGHIN_BIT	 0x04
-#define VIDEO_STD_PAL_M_BIT		 0x06
-#define VIDEO_STD_PAL_COMBINATION_N_BIT	 0x08
-#define VIDEO_STD_NTSC_4_43_BIT		 0x0a
-#define VIDEO_STD_SECAM_BIT		 0x0c
-
-#define VIDEO_STD_NTSC_MJ_BIT_AS                 0x01
-#define VIDEO_STD_PAL_BDGHIN_BIT_AS              0x03
-#define VIDEO_STD_PAL_M_BIT_AS		         0x05
-#define VIDEO_STD_PAL_COMBINATION_N_BIT_AS	 0x07
-#define VIDEO_STD_NTSC_4_43_BIT_AS		 0x09
-#define VIDEO_STD_SECAM_BIT_AS		         0x0b
-
-/* Reserved 29h-2bh */
-
-#define TVP5150_CB_GAIN_FACT        0x2c /* Cb gain factor */
-#define TVP5150_CR_GAIN_FACTOR      0x2d /* Cr gain factor */
-#define TVP5150_MACROVISION_ON_CTR  0x2e /* Macrovision on counter */
-#define TVP5150_MACROVISION_OFF_CTR 0x2f /* Macrovision off counter */
-#define TVP5150_REV_SELECT          0x30 /* revision select (TVP5150AM1 only) */
-
-/* Reserved	31h-7Fh */
-
-#define TVP5150_MSB_DEV_ID          0x80 /* MSB of device ID */
-#define TVP5150_LSB_DEV_ID          0x81 /* LSB of device ID */
-#define TVP5150_ROM_MAJOR_VER       0x82 /* ROM major version */
-#define TVP5150_ROM_MINOR_VER       0x83 /* ROM minor version */
-#define TVP5150_VERT_LN_COUNT_MSB   0x84 /* Vertical line count MSB */
-#define TVP5150_VERT_LN_COUNT_LSB   0x85 /* Vertical line count LSB */
-#define TVP5150_INT_STATUS_REG_B    0x86 /* Interrupt status register B */
-#define TVP5150_INT_ACTIVE_REG_B    0x87 /* Interrupt active register B */
-#define TVP5150_STATUS_REG_1        0x88 /* Status register #1 */
-#define TVP5150_STATUS_REG_2        0x89 /* Status register #2 */
-#define TVP5150_STATUS_REG_3        0x8a /* Status register #3 */
-#define TVP5150_STATUS_REG_4        0x8b /* Status register #4 */
-#define TVP5150_STATUS_REG_5        0x8c /* Status register #5 */
-/* Reserved	8Dh-8Fh */
- /* Closed caption data registers */
-#define TVP5150_CC_DATA_INI         0x90
-#define TVP5150_CC_DATA_END         0x93
-
- /* WSS data registers */
-#define TVP5150_WSS_DATA_INI        0x94
-#define TVP5150_WSS_DATA_END        0x99
-
-/* VPS data registers */
-#define TVP5150_VPS_DATA_INI        0x9a
-#define TVP5150_VPS_DATA_END        0xa6
-
-/* VITC data registers */
-#define TVP5150_VITC_DATA_INI       0xa7
-#define TVP5150_VITC_DATA_END       0xaf
-
-#define TVP5150_VBI_FIFO_READ_DATA  0xb0 /* VBI FIFO read data */
-
-/* Teletext filter 1 */
-#define TVP5150_TELETEXT_FIL1_INI  0xb1
-#define TVP5150_TELETEXT_FIL1_END  0xb5
-
-/* Teletext filter 2 */
-#define TVP5150_TELETEXT_FIL2_INI  0xb6
-#define TVP5150_TELETEXT_FIL2_END  0xba
-
-#define TVP5150_TELETEXT_FIL_ENA    0xbb /* Teletext filter enable */
-/* Reserved	BCh-BFh */
-#define TVP5150_INT_STATUS_REG_A    0xc0 /* Interrupt status register A */
-#define TVP5150_INT_ENABLE_REG_A    0xc1 /* Interrupt enable register A */
-#define TVP5150_INT_CONF            0xc2 /* Interrupt configuration */
-#define TVP5150_VDP_CONF_RAM_DATA   0xc3 /* VDP configuration RAM data */
-#define TVP5150_CONF_RAM_ADDR_LOW   0xc4 /* Configuration RAM address low byte */
-#define TVP5150_CONF_RAM_ADDR_HIGH  0xc5 /* Configuration RAM address high byte */
-#define TVP5150_VDP_STATUS_REG      0xc6 /* VDP status register */
-#define TVP5150_FIFO_WORD_COUNT     0xc7 /* FIFO word count */
-#define TVP5150_FIFO_INT_THRESHOLD  0xc8 /* FIFO interrupt threshold */
-#define TVP5150_FIFO_RESET          0xc9 /* FIFO reset */
-#define TVP5150_LINE_NUMBER_INT     0xca /* Line number interrupt */
-#define TVP5150_PIX_ALIGN_REG_LOW   0xcb /* Pixel alignment register low byte */
-#define TVP5150_PIX_ALIGN_REG_HIGH  0xcc /* Pixel alignment register high byte */
-#define TVP5150_FIFO_OUT_CTRL       0xcd /* FIFO output control */
-/* Reserved	CEh */
-#define TVP5150_FULL_FIELD_ENA      0xcf /* Full field enable 1 */
-
-/* Line mode registers */
-#define TVP5150_LINE_MODE_INI       0xd0
-#define TVP5150_LINE_MODE_END       0xfb
-
-#define TVP5150_FULL_FIELD_MODE_REG 0xfc /* Full field mode register */
-/* Reserved	FDh-FFh */
diff --git a/drivers/media/video/tvp7002.c b/drivers/media/video/tvp7002.c
deleted file mode 100644
index fb6a5b5..0000000
--- a/drivers/media/video/tvp7002.c
+++ /dev/null
@@ -1,1145 +0,0 @@
-/* Texas Instruments Triple 8-/10-BIT 165-/110-MSPS Video and Graphics
- * Digitizer with Horizontal PLL registers
- *
- * Copyright (C) 2009 Texas Instruments Inc
- * Author: Santiago Nunez-Corrales <santiago.nunez@ridgerun.com>
- *
- * This code is partially based upon the TVP5150 driver
- * written by Mauro Carvalho Chehab (mchehab@infradead.org),
- * the TVP514x driver written by Vaibhav Hiremath <hvaibhav@ti.com>
- * and the TVP7002 driver in the TI LSP 2.10.00.14. Revisions by
- * Muralidharan Karicheri and Snehaprabha Narnakaje (TI).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/videodev2.h>
-#include <linux/module.h>
-#include <linux/v4l2-dv-timings.h>
-#include <media/tvp7002.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ctrls.h>
-#include "tvp7002_reg.h"
-
-MODULE_DESCRIPTION("TI TVP7002 Video and Graphics Digitizer driver");
-MODULE_AUTHOR("Santiago Nunez-Corrales <santiago.nunez@ridgerun.com>");
-MODULE_LICENSE("GPL");
-
-/* Module Name */
-#define TVP7002_MODULE_NAME	"tvp7002"
-
-/* I2C retry attempts */
-#define I2C_RETRY_COUNT		(5)
-
-/* End of registers */
-#define TVP7002_EOR		0x5c
-
-/* Read write definition for registers */
-#define TVP7002_READ		0
-#define TVP7002_WRITE		1
-#define TVP7002_RESERVED	2
-
-/* Interlaced vs progressive mask and shift */
-#define TVP7002_IP_SHIFT	5
-#define TVP7002_INPR_MASK	(0x01 << TVP7002_IP_SHIFT)
-
-/* Shift for CPL and LPF registers */
-#define TVP7002_CL_SHIFT	8
-#define TVP7002_CL_MASK		0x0f
-
-/* Debug functions */
-static bool debug;
-module_param(debug, bool, 0644);
-MODULE_PARM_DESC(debug, "Debug level (0-2)");
-
-/* Structure for register values */
-struct i2c_reg_value {
-	u8 reg;
-	u8 value;
-	u8 type;
-};
-
-/*
- * Register default values (according to tvp7002 datasheet)
- * In the case of read-only registers, the value (0xff) is
- * never written. R/W functionality is controlled by the
- * writable bit in the register struct definition.
- */
-static const struct i2c_reg_value tvp7002_init_default[] = {
-	{ TVP7002_CHIP_REV, 0xff, TVP7002_READ },
-	{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x67, TVP7002_WRITE },
-	{ TVP7002_HPLL_FDBK_DIV_LSBS, 0x20, TVP7002_WRITE },
-	{ TVP7002_HPLL_CRTL, 0xa0, TVP7002_WRITE },
-	{ TVP7002_HPLL_PHASE_SEL, 0x80, TVP7002_WRITE },
-	{ TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
-	{ TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
-	{ TVP7002_HSYNC_OUT_W, 0x60, TVP7002_WRITE },
-	{ TVP7002_B_FINE_GAIN, 0x00, TVP7002_WRITE },
-	{ TVP7002_G_FINE_GAIN, 0x00, TVP7002_WRITE },
-	{ TVP7002_R_FINE_GAIN, 0x00, TVP7002_WRITE },
-	{ TVP7002_B_FINE_OFF_MSBS, 0x80, TVP7002_WRITE },
-	{ TVP7002_G_FINE_OFF_MSBS, 0x80, TVP7002_WRITE },
-	{ TVP7002_R_FINE_OFF_MSBS, 0x80, TVP7002_WRITE },
-	{ TVP7002_SYNC_CTL_1, 0x20, TVP7002_WRITE },
-	{ TVP7002_HPLL_AND_CLAMP_CTL, 0x2e, TVP7002_WRITE },
-	{ TVP7002_SYNC_ON_G_THRS, 0x5d, TVP7002_WRITE },
-	{ TVP7002_SYNC_SEPARATOR_THRS, 0x47, TVP7002_WRITE },
-	{ TVP7002_HPLL_PRE_COAST, 0x00, TVP7002_WRITE },
-	{ TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
-	{ TVP7002_SYNC_DETECT_STAT, 0xff, TVP7002_READ },
-	{ TVP7002_OUT_FORMATTER, 0x47, TVP7002_WRITE },
-	{ TVP7002_MISC_CTL_1, 0x01, TVP7002_WRITE },
-	{ TVP7002_MISC_CTL_2, 0x00, TVP7002_WRITE },
-	{ TVP7002_MISC_CTL_3, 0x01, TVP7002_WRITE },
-	{ TVP7002_IN_MUX_SEL_1, 0x00, TVP7002_WRITE },
-	{ TVP7002_IN_MUX_SEL_2, 0x67, TVP7002_WRITE },
-	{ TVP7002_B_AND_G_COARSE_GAIN, 0x77, TVP7002_WRITE },
-	{ TVP7002_R_COARSE_GAIN, 0x07, TVP7002_WRITE },
-	{ TVP7002_FINE_OFF_LSBS, 0x00, TVP7002_WRITE },
-	{ TVP7002_B_COARSE_OFF, 0x10, TVP7002_WRITE },
-	{ TVP7002_G_COARSE_OFF, 0x10, TVP7002_WRITE },
-	{ TVP7002_R_COARSE_OFF, 0x10, TVP7002_WRITE },
-	{ TVP7002_HSOUT_OUT_START, 0x08, TVP7002_WRITE },
-	{ TVP7002_MISC_CTL_4, 0x00, TVP7002_WRITE },
-	{ TVP7002_B_DGTL_ALC_OUT_LSBS, 0xff, TVP7002_READ },
-	{ TVP7002_G_DGTL_ALC_OUT_LSBS, 0xff, TVP7002_READ },
-	{ TVP7002_R_DGTL_ALC_OUT_LSBS, 0xff, TVP7002_READ },
-	{ TVP7002_AUTO_LVL_CTL_ENABLE, 0x80, TVP7002_WRITE },
-	{ TVP7002_DGTL_ALC_OUT_MSBS, 0xff, TVP7002_READ },
-	{ TVP7002_AUTO_LVL_CTL_FILTER, 0x53, TVP7002_WRITE },
-	{ 0x29, 0x08, TVP7002_RESERVED },
-	{ TVP7002_FINE_CLAMP_CTL, 0x07, TVP7002_WRITE },
-	/* PWR_CTL is controlled only by the probe and reset functions */
-	{ TVP7002_PWR_CTL, 0x00, TVP7002_RESERVED },
-	{ TVP7002_ADC_SETUP, 0x50, TVP7002_WRITE },
-	{ TVP7002_COARSE_CLAMP_CTL, 0x00, TVP7002_WRITE },
-	{ TVP7002_SOG_CLAMP, 0x80, TVP7002_WRITE },
-	{ TVP7002_RGB_COARSE_CLAMP_CTL, 0x8c, TVP7002_WRITE },
-	{ TVP7002_SOG_COARSE_CLAMP_CTL, 0x04, TVP7002_WRITE },
-	{ TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
-	{ 0x32, 0x18, TVP7002_RESERVED },
-	{ 0x33, 0x60, TVP7002_RESERVED },
-	{ TVP7002_MVIS_STRIPPER_W, 0xff, TVP7002_RESERVED },
-	{ TVP7002_VSYNC_ALGN, 0x10, TVP7002_WRITE },
-	{ TVP7002_SYNC_BYPASS, 0x00, TVP7002_WRITE },
-	{ TVP7002_L_FRAME_STAT_LSBS, 0xff, TVP7002_READ },
-	{ TVP7002_L_FRAME_STAT_MSBS, 0xff, TVP7002_READ },
-	{ TVP7002_CLK_L_STAT_LSBS, 0xff, TVP7002_READ },
-	{ TVP7002_CLK_L_STAT_MSBS, 0xff, TVP7002_READ },
-	{ TVP7002_HSYNC_W, 0xff, TVP7002_READ },
-	{ TVP7002_VSYNC_W, 0xff, TVP7002_READ },
-	{ TVP7002_L_LENGTH_TOL, 0x03, TVP7002_WRITE },
-	{ 0x3e, 0x60, TVP7002_RESERVED },
-	{ TVP7002_VIDEO_BWTH_CTL, 0x01, TVP7002_WRITE },
-	{ TVP7002_AVID_START_PIXEL_LSBS, 0x01, TVP7002_WRITE },
-	{ TVP7002_AVID_START_PIXEL_MSBS, 0x2c, TVP7002_WRITE },
-	{ TVP7002_AVID_STOP_PIXEL_LSBS, 0x06, TVP7002_WRITE },
-	{ TVP7002_AVID_STOP_PIXEL_MSBS, 0x2c, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_0_START_L_OFF, 0x05, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_0_DURATION, 0x1e, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE },
-	{ TVP7002_FBIT_F_0_START_L_OFF, 0x00, TVP7002_WRITE },
-	{ TVP7002_FBIT_F_1_START_L_OFF, 0x00, TVP7002_WRITE },
-	{ TVP7002_YUV_Y_G_COEF_LSBS, 0xe3, TVP7002_WRITE },
-	{ TVP7002_YUV_Y_G_COEF_MSBS, 0x16, TVP7002_WRITE },
-	{ TVP7002_YUV_Y_B_COEF_LSBS, 0x4f, TVP7002_WRITE },
-	{ TVP7002_YUV_Y_B_COEF_MSBS, 0x02, TVP7002_WRITE },
-	{ TVP7002_YUV_Y_R_COEF_LSBS, 0xce, TVP7002_WRITE },
-	{ TVP7002_YUV_Y_R_COEF_MSBS, 0x06, TVP7002_WRITE },
-	{ TVP7002_YUV_U_G_COEF_LSBS, 0xab, TVP7002_WRITE },
-	{ TVP7002_YUV_U_G_COEF_MSBS, 0xf3, TVP7002_WRITE },
-	{ TVP7002_YUV_U_B_COEF_LSBS, 0x00, TVP7002_WRITE },
-	{ TVP7002_YUV_U_B_COEF_MSBS, 0x10, TVP7002_WRITE },
-	{ TVP7002_YUV_U_R_COEF_LSBS, 0x55, TVP7002_WRITE },
-	{ TVP7002_YUV_U_R_COEF_MSBS, 0xfc, TVP7002_WRITE },
-	{ TVP7002_YUV_V_G_COEF_LSBS, 0x78, TVP7002_WRITE },
-	{ TVP7002_YUV_V_G_COEF_MSBS, 0xf1, TVP7002_WRITE },
-	{ TVP7002_YUV_V_B_COEF_LSBS, 0x88, TVP7002_WRITE },
-	{ TVP7002_YUV_V_B_COEF_MSBS, 0xfe, TVP7002_WRITE },
-	{ TVP7002_YUV_V_R_COEF_LSBS, 0x00, TVP7002_WRITE },
-	{ TVP7002_YUV_V_R_COEF_MSBS, 0x10, TVP7002_WRITE },
-	/* This signals end of register values */
-	{ TVP7002_EOR, 0xff, TVP7002_RESERVED }
-};
-
-/* Register parameters for 480P */
-static const struct i2c_reg_value tvp7002_parms_480P[] = {
-	{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x35, TVP7002_WRITE },
-	{ TVP7002_HPLL_FDBK_DIV_LSBS, 0xa0, TVP7002_WRITE },
-	{ TVP7002_HPLL_CRTL, 0x02, TVP7002_WRITE },
-	{ TVP7002_AVID_START_PIXEL_LSBS, 0x91, TVP7002_WRITE },
-	{ TVP7002_AVID_START_PIXEL_MSBS, 0x00, TVP7002_WRITE },
-	{ TVP7002_AVID_STOP_PIXEL_LSBS, 0x0B, TVP7002_WRITE },
-	{ TVP7002_AVID_STOP_PIXEL_MSBS, 0x00, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_0_START_L_OFF, 0x03, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_1_START_L_OFF, 0x01, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_0_DURATION, 0x13, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_1_DURATION, 0x13, TVP7002_WRITE },
-	{ TVP7002_ALC_PLACEMENT, 0x18, TVP7002_WRITE },
-	{ TVP7002_CLAMP_START, 0x06, TVP7002_WRITE },
-	{ TVP7002_CLAMP_W, 0x10, TVP7002_WRITE },
-	{ TVP7002_HPLL_PRE_COAST, 0x03, TVP7002_WRITE },
-	{ TVP7002_HPLL_POST_COAST, 0x03, TVP7002_WRITE },
-	{ TVP7002_EOR, 0xff, TVP7002_RESERVED }
-};
-
-/* Register parameters for 576P */
-static const struct i2c_reg_value tvp7002_parms_576P[] = {
-	{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x36, TVP7002_WRITE },
-	{ TVP7002_HPLL_FDBK_DIV_LSBS, 0x00, TVP7002_WRITE },
-	{ TVP7002_HPLL_CRTL, 0x18, TVP7002_WRITE },
-	{ TVP7002_AVID_START_PIXEL_LSBS, 0x9B, TVP7002_WRITE },
-	{ TVP7002_AVID_START_PIXEL_MSBS, 0x00, TVP7002_WRITE },
-	{ TVP7002_AVID_STOP_PIXEL_LSBS, 0x0F, TVP7002_WRITE },
-	{ TVP7002_AVID_STOP_PIXEL_MSBS, 0x00, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_0_START_L_OFF, 0x00, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_0_DURATION, 0x2D, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE },
-	{ TVP7002_ALC_PLACEMENT, 0x18, TVP7002_WRITE },
-	{ TVP7002_CLAMP_START, 0x06, TVP7002_WRITE },
-	{ TVP7002_CLAMP_W, 0x10, TVP7002_WRITE },
-	{ TVP7002_HPLL_PRE_COAST, 0x03, TVP7002_WRITE },
-	{ TVP7002_HPLL_POST_COAST, 0x03, TVP7002_WRITE },
-	{ TVP7002_EOR, 0xff, TVP7002_RESERVED }
-};
-
-/* Register parameters for 1080I60 */
-static const struct i2c_reg_value tvp7002_parms_1080I60[] = {
-	{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x89, TVP7002_WRITE },
-	{ TVP7002_HPLL_FDBK_DIV_LSBS, 0x80, TVP7002_WRITE },
-	{ TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE },
-	{ TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE },
-	{ TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
-	{ TVP7002_AVID_STOP_PIXEL_LSBS, 0x8a, TVP7002_WRITE },
-	{ TVP7002_AVID_STOP_PIXEL_MSBS, 0x08, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_0_START_L_OFF, 0x02, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_1_START_L_OFF, 0x02, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_0_DURATION, 0x16, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_1_DURATION, 0x17, TVP7002_WRITE },
-	{ TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
-	{ TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
-	{ TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
-	{ TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE },
-	{ TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
-	{ TVP7002_EOR, 0xff, TVP7002_RESERVED }
-};
-
-/* Register parameters for 1080P60 */
-static const struct i2c_reg_value tvp7002_parms_1080P60[] = {
-	{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x89, TVP7002_WRITE },
-	{ TVP7002_HPLL_FDBK_DIV_LSBS, 0x80, TVP7002_WRITE },
-	{ TVP7002_HPLL_CRTL, 0xE0, TVP7002_WRITE },
-	{ TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE },
-	{ TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
-	{ TVP7002_AVID_STOP_PIXEL_LSBS, 0x8a, TVP7002_WRITE },
-	{ TVP7002_AVID_STOP_PIXEL_MSBS, 0x08, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_0_START_L_OFF, 0x02, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_1_START_L_OFF, 0x02, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_0_DURATION, 0x16, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_1_DURATION, 0x17, TVP7002_WRITE },
-	{ TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
-	{ TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
-	{ TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
-	{ TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE },
-	{ TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
-	{ TVP7002_EOR, 0xff, TVP7002_RESERVED }
-};
-
-/* Register parameters for 1080I50 */
-static const struct i2c_reg_value tvp7002_parms_1080I50[] = {
-	{ TVP7002_HPLL_FDBK_DIV_MSBS, 0xa5, TVP7002_WRITE },
-	{ TVP7002_HPLL_FDBK_DIV_LSBS, 0x00, TVP7002_WRITE },
-	{ TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE },
-	{ TVP7002_AVID_START_PIXEL_LSBS, 0x06, TVP7002_WRITE },
-	{ TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
-	{ TVP7002_AVID_STOP_PIXEL_LSBS, 0x8a, TVP7002_WRITE },
-	{ TVP7002_AVID_STOP_PIXEL_MSBS, 0x08, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_0_START_L_OFF, 0x02, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_1_START_L_OFF, 0x02, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_0_DURATION, 0x16, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_1_DURATION, 0x17, TVP7002_WRITE },
-	{ TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
-	{ TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
-	{ TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
-	{ TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE },
-	{ TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
-	{ TVP7002_EOR, 0xff, TVP7002_RESERVED }
-};
-
-/* Register parameters for 720P60 */
-static const struct i2c_reg_value tvp7002_parms_720P60[] = {
-	{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x67, TVP7002_WRITE },
-	{ TVP7002_HPLL_FDBK_DIV_LSBS, 0x20, TVP7002_WRITE },
-	{ TVP7002_HPLL_CRTL, 0xa0, TVP7002_WRITE },
-	{ TVP7002_AVID_START_PIXEL_LSBS, 0x47, TVP7002_WRITE },
-	{ TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
-	{ TVP7002_AVID_STOP_PIXEL_LSBS, 0x4B, TVP7002_WRITE },
-	{ TVP7002_AVID_STOP_PIXEL_MSBS, 0x06, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_0_START_L_OFF, 0x05, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_0_DURATION, 0x2D, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE },
-	{ TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
-	{ TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
-	{ TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
-	{ TVP7002_HPLL_PRE_COAST, 0x00, TVP7002_WRITE },
-	{ TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
-	{ TVP7002_EOR, 0xff, TVP7002_RESERVED }
-};
-
-/* Register parameters for 720P50 */
-static const struct i2c_reg_value tvp7002_parms_720P50[] = {
-	{ TVP7002_HPLL_FDBK_DIV_MSBS, 0x7b, TVP7002_WRITE },
-	{ TVP7002_HPLL_FDBK_DIV_LSBS, 0xc0, TVP7002_WRITE },
-	{ TVP7002_HPLL_CRTL, 0x98, TVP7002_WRITE },
-	{ TVP7002_AVID_START_PIXEL_LSBS, 0x47, TVP7002_WRITE },
-	{ TVP7002_AVID_START_PIXEL_MSBS, 0x01, TVP7002_WRITE },
-	{ TVP7002_AVID_STOP_PIXEL_LSBS, 0x4B, TVP7002_WRITE },
-	{ TVP7002_AVID_STOP_PIXEL_MSBS, 0x06, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_0_START_L_OFF, 0x05, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_1_START_L_OFF, 0x00, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_0_DURATION, 0x2D, TVP7002_WRITE },
-	{ TVP7002_VBLK_F_1_DURATION, 0x00, TVP7002_WRITE },
-	{ TVP7002_ALC_PLACEMENT, 0x5a, TVP7002_WRITE },
-	{ TVP7002_CLAMP_START, 0x32, TVP7002_WRITE },
-	{ TVP7002_CLAMP_W, 0x20, TVP7002_WRITE },
-	{ TVP7002_HPLL_PRE_COAST, 0x01, TVP7002_WRITE },
-	{ TVP7002_HPLL_POST_COAST, 0x00, TVP7002_WRITE },
-	{ TVP7002_EOR, 0xff, TVP7002_RESERVED }
-};
-
-/* Preset definition for handling device operation */
-struct tvp7002_preset_definition {
-	u32 preset;
-	struct v4l2_dv_timings timings;
-	const struct i2c_reg_value *p_settings;
-	enum v4l2_colorspace color_space;
-	enum v4l2_field scanmode;
-	u16 progressive;
-	u16 lines_per_frame;
-	u16 cpl_min;
-	u16 cpl_max;
-};
-
-/* Struct list for digital video presets */
-static const struct tvp7002_preset_definition tvp7002_presets[] = {
-	{
-		V4L2_DV_720P60,
-		V4L2_DV_BT_CEA_1280X720P60,
-		tvp7002_parms_720P60,
-		V4L2_COLORSPACE_REC709,
-		V4L2_FIELD_NONE,
-		1,
-		0x2EE,
-		135,
-		153
-	},
-	{
-		V4L2_DV_1080I60,
-		V4L2_DV_BT_CEA_1920X1080I60,
-		tvp7002_parms_1080I60,
-		V4L2_COLORSPACE_REC709,
-		V4L2_FIELD_INTERLACED,
-		0,
-		0x465,
-		181,
-		205
-	},
-	{
-		V4L2_DV_1080I50,
-		V4L2_DV_BT_CEA_1920X1080I50,
-		tvp7002_parms_1080I50,
-		V4L2_COLORSPACE_REC709,
-		V4L2_FIELD_INTERLACED,
-		0,
-		0x465,
-		217,
-		245
-	},
-	{
-		V4L2_DV_720P50,
-		V4L2_DV_BT_CEA_1280X720P50,
-		tvp7002_parms_720P50,
-		V4L2_COLORSPACE_REC709,
-		V4L2_FIELD_NONE,
-		1,
-		0x2EE,
-		163,
-		183
-	},
-	{
-		V4L2_DV_1080P60,
-		V4L2_DV_BT_CEA_1920X1080P60,
-		tvp7002_parms_1080P60,
-		V4L2_COLORSPACE_REC709,
-		V4L2_FIELD_NONE,
-		1,
-		0x465,
-		90,
-		102
-	},
-	{
-		V4L2_DV_480P59_94,
-		V4L2_DV_BT_CEA_720X480P59_94,
-		tvp7002_parms_480P,
-		V4L2_COLORSPACE_SMPTE170M,
-		V4L2_FIELD_NONE,
-		1,
-		0x20D,
-		0xffff,
-		0xffff
-	},
-	{
-		V4L2_DV_576P50,
-		V4L2_DV_BT_CEA_720X576P50,
-		tvp7002_parms_576P,
-		V4L2_COLORSPACE_SMPTE170M,
-		V4L2_FIELD_NONE,
-		1,
-		0x271,
-		0xffff,
-		0xffff
-	}
-};
-
-#define NUM_PRESETS	ARRAY_SIZE(tvp7002_presets)
-
-/* Device definition */
-struct tvp7002 {
-	struct v4l2_subdev sd;
-	struct v4l2_ctrl_handler hdl;
-	const struct tvp7002_config *pdata;
-
-	int ver;
-	int streaming;
-
-	const struct tvp7002_preset_definition *current_preset;
-};
-
-/*
- * to_tvp7002 - Obtain device handler TVP7002
- * @sd: ptr to v4l2_subdev struct
- *
- * Returns device handler tvp7002.
- */
-static inline struct tvp7002 *to_tvp7002(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct tvp7002, sd);
-}
-
-static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
-{
-	return &container_of(ctrl->handler, struct tvp7002, hdl)->sd;
-}
-
-/*
- * tvp7002_read - Read a value from a register in an TVP7002
- * @sd: ptr to v4l2_subdev struct
- * @addr: TVP7002 register address
- * @dst: pointer to 8-bit destination
- *
- * Returns value read if successful, or non-zero (-1) otherwise.
- */
-static int tvp7002_read(struct v4l2_subdev *sd, u8 addr, u8 *dst)
-{
-	struct i2c_client *c = v4l2_get_subdevdata(sd);
-	int retry;
-	int error;
-
-	for (retry = 0; retry < I2C_RETRY_COUNT; retry++) {
-		error = i2c_smbus_read_byte_data(c, addr);
-
-		if (error >= 0) {
-			*dst = (u8)error;
-			return 0;
-		}
-
-		msleep_interruptible(10);
-	}
-	v4l2_err(sd, "TVP7002 read error %d\n", error);
-	return error;
-}
-
-/*
- * tvp7002_read_err() - Read a register value with error code
- * @sd: pointer to standard V4L2 sub-device structure
- * @reg: destination register
- * @val: value to be read
- * @err: pointer to error value
- *
- * Read a value in a register and save error value in pointer.
- * Also update the register table if successful
- */
-static inline void tvp7002_read_err(struct v4l2_subdev *sd, u8 reg,
-							u8 *dst, int *err)
-{
-	if (!*err)
-		*err = tvp7002_read(sd, reg, dst);
-}
-
-/*
- * tvp7002_write() - Write a value to a register in TVP7002
- * @sd: ptr to v4l2_subdev struct
- * @addr: TVP7002 register address
- * @value: value to be written to the register
- *
- * Write a value to a register in an TVP7002 decoder device.
- * Returns zero if successful, or non-zero otherwise.
- */
-static int tvp7002_write(struct v4l2_subdev *sd, u8 addr, u8 value)
-{
-	struct i2c_client *c;
-	int retry;
-	int error;
-
-	c = v4l2_get_subdevdata(sd);
-
-	for (retry = 0; retry < I2C_RETRY_COUNT; retry++) {
-		error = i2c_smbus_write_byte_data(c, addr, value);
-
-		if (error >= 0)
-			return 0;
-
-		v4l2_warn(sd, "Write: retry ... %d\n", retry);
-		msleep_interruptible(10);
-	}
-	v4l2_err(sd, "TVP7002 write error %d\n", error);
-	return error;
-}
-
-/*
- * tvp7002_write_err() - Write a register value with error code
- * @sd: pointer to standard V4L2 sub-device structure
- * @reg: destination register
- * @val: value to be written
- * @err: pointer to error value
- *
- * Write a value in a register and save error value in pointer.
- * Also update the register table if successful
- */
-static inline void tvp7002_write_err(struct v4l2_subdev *sd, u8 reg,
-							u8 val, int *err)
-{
-	if (!*err)
-		*err = tvp7002_write(sd, reg, val);
-}
-
-/*
- * tvp7002_g_chip_ident() - Get chip identification number
- * @sd: ptr to v4l2_subdev struct
- * @chip: ptr to v4l2_dbg_chip_ident struct
- *
- * Obtains the chip's identification number.
- * Returns zero or -EINVAL if read operation fails.
- */
-static int tvp7002_g_chip_ident(struct v4l2_subdev *sd,
-					struct v4l2_dbg_chip_ident *chip)
-{
-	u8 rev;
-	int error;
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	error = tvp7002_read(sd, TVP7002_CHIP_REV, &rev);
-
-	if (error < 0)
-		return error;
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TVP7002, rev);
-}
-
-/*
- * tvp7002_write_inittab() - Write initialization values
- * @sd: ptr to v4l2_subdev struct
- * @regs: ptr to i2c_reg_value struct
- *
- * Write initialization values.
- * Returns zero or -EINVAL if read operation fails.
- */
-static int tvp7002_write_inittab(struct v4l2_subdev *sd,
-					const struct i2c_reg_value *regs)
-{
-	int error = 0;
-
-	/* Initialize the first (defined) registers */
-	while (TVP7002_EOR != regs->reg) {
-		if (TVP7002_WRITE == regs->type)
-			tvp7002_write_err(sd, regs->reg, regs->value, &error);
-		regs++;
-	}
-
-	return error;
-}
-
-/*
- * tvp7002_s_dv_preset() - Set digital video preset
- * @sd: ptr to v4l2_subdev struct
- * @dv_preset: ptr to v4l2_dv_preset struct
- *
- * Set the digital video preset for a TVP7002 decoder device.
- * Returns zero when successful or -EINVAL if register access fails.
- */
-static int tvp7002_s_dv_preset(struct v4l2_subdev *sd,
-					struct v4l2_dv_preset *dv_preset)
-{
-	struct tvp7002 *device = to_tvp7002(sd);
-	u32 preset;
-	int i;
-
-	for (i = 0; i < NUM_PRESETS; i++) {
-		preset = tvp7002_presets[i].preset;
-		if (preset == dv_preset->preset) {
-			device->current_preset = &tvp7002_presets[i];
-			return tvp7002_write_inittab(sd, tvp7002_presets[i].p_settings);
-		}
-	}
-
-	return -EINVAL;
-}
-
-static int tvp7002_s_dv_timings(struct v4l2_subdev *sd,
-					struct v4l2_dv_timings *dv_timings)
-{
-	struct tvp7002 *device = to_tvp7002(sd);
-	const struct v4l2_bt_timings *bt = &dv_timings->bt;
-	int i;
-
-	if (dv_timings->type != V4L2_DV_BT_656_1120)
-		return -EINVAL;
-	for (i = 0; i < NUM_PRESETS; i++) {
-		const struct v4l2_bt_timings *t = &tvp7002_presets[i].timings.bt;
-
-		if (!memcmp(bt, t, &bt->standards - &bt->width)) {
-			device->current_preset = &tvp7002_presets[i];
-			return tvp7002_write_inittab(sd, tvp7002_presets[i].p_settings);
-		}
-	}
-	return -EINVAL;
-}
-
-static int tvp7002_g_dv_timings(struct v4l2_subdev *sd,
-					struct v4l2_dv_timings *dv_timings)
-{
-	struct tvp7002 *device = to_tvp7002(sd);
-
-	*dv_timings = device->current_preset->timings;
-	return 0;
-}
-
-/*
- * tvp7002_s_ctrl() - Set a control
- * @ctrl: ptr to v4l2_ctrl struct
- *
- * Set a control in TVP7002 decoder device.
- * Returns zero when successful or -EINVAL if register access fails.
- */
-static int tvp7002_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-	int error = 0;
-
-	switch (ctrl->id) {
-	case V4L2_CID_GAIN:
-		tvp7002_write_err(sd, TVP7002_R_FINE_GAIN, ctrl->val, &error);
-		tvp7002_write_err(sd, TVP7002_G_FINE_GAIN, ctrl->val, &error);
-		tvp7002_write_err(sd, TVP7002_B_FINE_GAIN, ctrl->val, &error);
-		return error;
-	}
-	return -EINVAL;
-}
-
-/*
- * tvp7002_mbus_fmt() - V4L2 decoder interface handler for try/s/g_mbus_fmt
- * @sd: pointer to standard V4L2 sub-device structure
- * @f: pointer to mediabus format structure
- *
- * Negotiate the image capture size and mediabus format.
- * There is only one possible format, so this single function works for
- * get, set and try.
- */
-static int tvp7002_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f)
-{
-	struct tvp7002 *device = to_tvp7002(sd);
-	struct v4l2_dv_enum_preset e_preset;
-	int error;
-
-	/* Calculate height and width based on current standard */
-	error = v4l_fill_dv_preset_info(device->current_preset->preset, &e_preset);
-	if (error)
-		return error;
-
-	f->width = e_preset.width;
-	f->height = e_preset.height;
-	f->code = V4L2_MBUS_FMT_YUYV10_1X20;
-	f->field = device->current_preset->scanmode;
-	f->colorspace = device->current_preset->color_space;
-
-	v4l2_dbg(1, debug, sd, "MBUS_FMT: Width - %d, Height - %d",
-			f->width, f->height);
-	return 0;
-}
-
-/*
- * tvp7002_query_dv_preset() - query DV preset
- * @sd: pointer to standard V4L2 sub-device structure
- * @qpreset: standard V4L2 v4l2_dv_preset structure
- *
- * Returns the current DV preset by TVP7002. If no active input is
- * detected, returns -EINVAL
- */
-static int tvp7002_query_dv(struct v4l2_subdev *sd, int *index)
-{
-	const struct tvp7002_preset_definition *presets = tvp7002_presets;
-	u8 progressive;
-	u32 lpfr;
-	u32 cpln;
-	int error = 0;
-	u8 lpf_lsb;
-	u8 lpf_msb;
-	u8 cpl_lsb;
-	u8 cpl_msb;
-
-	/* Return invalid index if no active input is detected */
-	*index = NUM_PRESETS;
-
-	/* Read standards from device registers */
-	tvp7002_read_err(sd, TVP7002_L_FRAME_STAT_LSBS, &lpf_lsb, &error);
-	tvp7002_read_err(sd, TVP7002_L_FRAME_STAT_MSBS, &lpf_msb, &error);
-
-	if (error < 0)
-		return error;
-
-	tvp7002_read_err(sd, TVP7002_CLK_L_STAT_LSBS, &cpl_lsb, &error);
-	tvp7002_read_err(sd, TVP7002_CLK_L_STAT_MSBS, &cpl_msb, &error);
-
-	if (error < 0)
-		return error;
-
-	/* Get lines per frame, clocks per line and interlaced/progresive */
-	lpfr = lpf_lsb | ((TVP7002_CL_MASK & lpf_msb) << TVP7002_CL_SHIFT);
-	cpln = cpl_lsb | ((TVP7002_CL_MASK & cpl_msb) << TVP7002_CL_SHIFT);
-	progressive = (lpf_msb & TVP7002_INPR_MASK) >> TVP7002_IP_SHIFT;
-
-	/* Do checking of video modes */
-	for (*index = 0; *index < NUM_PRESETS; (*index)++, presets++)
-		if (lpfr == presets->lines_per_frame &&
-			progressive == presets->progressive) {
-			if (presets->cpl_min == 0xffff)
-				break;
-			if (cpln >= presets->cpl_min && cpln <= presets->cpl_max)
-				break;
-		}
-
-	if (*index == NUM_PRESETS) {
-		v4l2_dbg(1, debug, sd, "detection failed: lpf = %x, cpl = %x\n",
-								lpfr, cpln);
-		return -ENOLINK;
-	}
-
-	/* Update lines per frame and clocks per line info */
-	v4l2_dbg(1, debug, sd, "detected preset: %d\n", *index);
-	return 0;
-}
-
-static int tvp7002_query_dv_preset(struct v4l2_subdev *sd,
-					struct v4l2_dv_preset *qpreset)
-{
-	int index;
-	int err = tvp7002_query_dv(sd, &index);
-
-	if (err || index == NUM_PRESETS) {
-		qpreset->preset = V4L2_DV_INVALID;
-		if (err == -ENOLINK)
-			err = 0;
-		return err;
-	}
-	qpreset->preset = tvp7002_presets[index].preset;
-	return 0;
-}
-
-static int tvp7002_query_dv_timings(struct v4l2_subdev *sd,
-					struct v4l2_dv_timings *timings)
-{
-	int index;
-	int err = tvp7002_query_dv(sd, &index);
-
-	if (err)
-		return err;
-	*timings = tvp7002_presets[index].timings;
-	return 0;
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-/*
- * tvp7002_g_register() - Get the value of a register
- * @sd: ptr to v4l2_subdev struct
- * @reg: ptr to v4l2_dbg_register struct
- *
- * Get the value of a TVP7002 decoder device register.
- * Returns zero when successful, -EINVAL if register read fails or
- * access to I2C client fails, -EPERM if the call is not allowed
- * by disabled CAP_SYS_ADMIN.
- */
-static int tvp7002_g_register(struct v4l2_subdev *sd,
-						struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u8 val;
-	int ret;
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-
-	ret = tvp7002_read(sd, reg->reg & 0xff, &val);
-	reg->val = val;
-	return ret;
-}
-
-/*
- * tvp7002_s_register() - set a control
- * @sd: ptr to v4l2_subdev struct
- * @reg: ptr to v4l2_dbg_register struct
- *
- * Get the value of a TVP7002 decoder device register.
- * Returns zero when successful, -EINVAL if register read fails or
- * -EPERM if call not allowed.
- */
-static int tvp7002_s_register(struct v4l2_subdev *sd,
-						struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-
-	return tvp7002_write(sd, reg->reg & 0xff, reg->val & 0xff);
-}
-#endif
-
-/*
- * tvp7002_enum_mbus_fmt() - Enum supported mediabus formats
- * @sd: pointer to standard V4L2 sub-device structure
- * @index: format index
- * @code: pointer to mediabus format
- *
- * Enumerate supported mediabus formats.
- */
-
-static int tvp7002_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
-					enum v4l2_mbus_pixelcode *code)
-{
-	/* Check requested format index is within range */
-	if (index)
-		return -EINVAL;
-	*code = V4L2_MBUS_FMT_YUYV10_1X20;
-	return 0;
-}
-
-/*
- * tvp7002_s_stream() - V4L2 decoder i/f handler for s_stream
- * @sd: pointer to standard V4L2 sub-device structure
- * @enable: streaming enable or disable
- *
- * Sets streaming to enable or disable, if possible.
- */
-static int tvp7002_s_stream(struct v4l2_subdev *sd, int enable)
-{
-	struct tvp7002 *device = to_tvp7002(sd);
-	int error = 0;
-
-	if (device->streaming == enable)
-		return 0;
-
-	if (enable) {
-		/* Set output state on (low impedance means stream on) */
-		error = tvp7002_write(sd, TVP7002_MISC_CTL_2, 0x00);
-		device->streaming = enable;
-	} else {
-		/* Set output state off (high impedance means stream off) */
-		error = tvp7002_write(sd, TVP7002_MISC_CTL_2, 0x03);
-		if (error)
-			v4l2_dbg(1, debug, sd, "Unable to stop streaming\n");
-
-		device->streaming = enable;
-	}
-
-	return error;
-}
-
-/*
- * tvp7002_log_status() - Print information about register settings
- * @sd: ptr to v4l2_subdev struct
- *
- * Log register values of a TVP7002 decoder device.
- * Returns zero or -EINVAL if read operation fails.
- */
-static int tvp7002_log_status(struct v4l2_subdev *sd)
-{
-	const struct tvp7002_preset_definition *presets = tvp7002_presets;
-	struct tvp7002 *device = to_tvp7002(sd);
-	struct v4l2_dv_enum_preset e_preset;
-	struct v4l2_dv_preset detected;
-	int i;
-
-	detected.preset = V4L2_DV_INVALID;
-	/* Find my current standard*/
-	tvp7002_query_dv_preset(sd, &detected);
-
-	/* Print standard related code values */
-	for (i = 0; i < NUM_PRESETS; i++, presets++)
-		if (presets->preset == detected.preset)
-			break;
-
-	if (v4l_fill_dv_preset_info(device->current_preset->preset, &e_preset))
-		return -EINVAL;
-
-	v4l2_info(sd, "Selected DV Preset: %s\n", e_preset.name);
-	v4l2_info(sd, "   Pixels per line: %u\n", e_preset.width);
-	v4l2_info(sd, "   Lines per frame: %u\n\n", e_preset.height);
-	if (i == NUM_PRESETS) {
-		v4l2_info(sd, "Detected DV Preset: None\n");
-	} else {
-		if (v4l_fill_dv_preset_info(presets->preset, &e_preset))
-			return -EINVAL;
-		v4l2_info(sd, "Detected DV Preset: %s\n", e_preset.name);
-		v4l2_info(sd, "  Pixels per line: %u\n", e_preset.width);
-		v4l2_info(sd, "  Lines per frame: %u\n\n", e_preset.height);
-	}
-	v4l2_info(sd, "Streaming enabled: %s\n",
-					device->streaming ? "yes" : "no");
-
-	/* Print the current value of the gain control */
-	v4l2_ctrl_handler_log_status(&device->hdl, sd->name);
-
-	return 0;
-}
-
-/*
- * tvp7002_enum_dv_presets() - Enum supported digital video formats
- * @sd: pointer to standard V4L2 sub-device structure
- * @preset: pointer to format struct
- *
- * Enumerate supported digital video formats.
- */
-static int tvp7002_enum_dv_presets(struct v4l2_subdev *sd,
-		struct v4l2_dv_enum_preset *preset)
-{
-	/* Check requested format index is within range */
-	if (preset->index >= NUM_PRESETS)
-		return -EINVAL;
-
-	return v4l_fill_dv_preset_info(tvp7002_presets[preset->index].preset, preset);
-}
-
-static int tvp7002_enum_dv_timings(struct v4l2_subdev *sd,
-		struct v4l2_enum_dv_timings *timings)
-{
-	/* Check requested format index is within range */
-	if (timings->index >= NUM_PRESETS)
-		return -EINVAL;
-
-	timings->timings = tvp7002_presets[timings->index].timings;
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops tvp7002_ctrl_ops = {
-	.s_ctrl = tvp7002_s_ctrl,
-};
-
-/* V4L2 core operation handlers */
-static const struct v4l2_subdev_core_ops tvp7002_core_ops = {
-	.g_chip_ident = tvp7002_g_chip_ident,
-	.log_status = tvp7002_log_status,
-	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
-	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
-	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
-	.g_ctrl = v4l2_subdev_g_ctrl,
-	.s_ctrl = v4l2_subdev_s_ctrl,
-	.queryctrl = v4l2_subdev_queryctrl,
-	.querymenu = v4l2_subdev_querymenu,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.g_register = tvp7002_g_register,
-	.s_register = tvp7002_s_register,
-#endif
-};
-
-/* Specific video subsystem operation handlers */
-static const struct v4l2_subdev_video_ops tvp7002_video_ops = {
-	.enum_dv_presets = tvp7002_enum_dv_presets,
-	.s_dv_preset = tvp7002_s_dv_preset,
-	.query_dv_preset = tvp7002_query_dv_preset,
-	.g_dv_timings = tvp7002_g_dv_timings,
-	.s_dv_timings = tvp7002_s_dv_timings,
-	.enum_dv_timings = tvp7002_enum_dv_timings,
-	.query_dv_timings = tvp7002_query_dv_timings,
-	.s_stream = tvp7002_s_stream,
-	.g_mbus_fmt = tvp7002_mbus_fmt,
-	.try_mbus_fmt = tvp7002_mbus_fmt,
-	.s_mbus_fmt = tvp7002_mbus_fmt,
-	.enum_mbus_fmt = tvp7002_enum_mbus_fmt,
-};
-
-/* V4L2 top level operation handlers */
-static const struct v4l2_subdev_ops tvp7002_ops = {
-	.core = &tvp7002_core_ops,
-	.video = &tvp7002_video_ops,
-};
-
-/*
- * tvp7002_probe - Probe a TVP7002 device
- * @c: ptr to i2c_client struct
- * @id: ptr to i2c_device_id struct
- *
- * Initialize the TVP7002 device
- * Returns zero when successful, -EINVAL if register read fails or
- * -EIO if i2c access is not available.
- */
-static int tvp7002_probe(struct i2c_client *c, const struct i2c_device_id *id)
-{
-	struct v4l2_subdev *sd;
-	struct tvp7002 *device;
-	struct v4l2_dv_preset preset;
-	int polarity_a;
-	int polarity_b;
-	u8 revision;
-
-	int error;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(c->adapter,
-		I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
-		return -EIO;
-
-	if (!c->dev.platform_data) {
-		v4l_err(c, "No platform data!!\n");
-		return -ENODEV;
-	}
-
-	device = kzalloc(sizeof(struct tvp7002), GFP_KERNEL);
-
-	if (!device)
-		return -ENOMEM;
-
-	sd = &device->sd;
-	device->pdata = c->dev.platform_data;
-	device->current_preset = tvp7002_presets;
-
-	/* Tell v4l2 the device is ready */
-	v4l2_i2c_subdev_init(sd, c, &tvp7002_ops);
-	v4l_info(c, "tvp7002 found @ 0x%02x (%s)\n",
-					c->addr, c->adapter->name);
-
-	error = tvp7002_read(sd, TVP7002_CHIP_REV, &revision);
-	if (error < 0)
-		goto found_error;
-
-	/* Get revision number */
-	v4l2_info(sd, "Rev. %02x detected.\n", revision);
-	if (revision != 0x02)
-		v4l2_info(sd, "Unknown revision detected.\n");
-
-	/* Initializes TVP7002 to its default values */
-	error = tvp7002_write_inittab(sd, tvp7002_init_default);
-
-	if (error < 0)
-		goto found_error;
-
-	/* Set polarity information after registers have been set */
-	polarity_a = 0x20 | device->pdata->hs_polarity << 5
-			| device->pdata->vs_polarity << 2;
-	error = tvp7002_write(sd, TVP7002_SYNC_CTL_1, polarity_a);
-	if (error < 0)
-		goto found_error;
-
-	polarity_b = 0x01  | device->pdata->fid_polarity << 2
-			| device->pdata->sog_polarity << 1
-			| device->pdata->clk_polarity;
-	error = tvp7002_write(sd, TVP7002_MISC_CTL_3, polarity_b);
-	if (error < 0)
-		goto found_error;
-
-	/* Set registers according to default video mode */
-	preset.preset = device->current_preset->preset;
-	error = tvp7002_s_dv_preset(sd, &preset);
-
-	v4l2_ctrl_handler_init(&device->hdl, 1);
-	v4l2_ctrl_new_std(&device->hdl, &tvp7002_ctrl_ops,
-			V4L2_CID_GAIN, 0, 255, 1, 0);
-	sd->ctrl_handler = &device->hdl;
-	if (device->hdl.error) {
-		int err = device->hdl.error;
-
-		v4l2_ctrl_handler_free(&device->hdl);
-		kfree(device);
-		return err;
-	}
-	v4l2_ctrl_handler_setup(&device->hdl);
-
-found_error:
-	if (error < 0)
-		kfree(device);
-
-	return error;
-}
-
-/*
- * tvp7002_remove - Remove TVP7002 device support
- * @c: ptr to i2c_client struct
- *
- * Reset the TVP7002 device
- * Returns zero.
- */
-static int tvp7002_remove(struct i2c_client *c)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(c);
-	struct tvp7002 *device = to_tvp7002(sd);
-
-	v4l2_dbg(1, debug, sd, "Removing tvp7002 adapter"
-				"on address 0x%x\n", c->addr);
-
-	v4l2_device_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(&device->hdl);
-	kfree(device);
-	return 0;
-}
-
-/* I2C Device ID table */
-static const struct i2c_device_id tvp7002_id[] = {
-	{ "tvp7002", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, tvp7002_id);
-
-/* I2C driver data */
-static struct i2c_driver tvp7002_driver = {
-	.driver = {
-		.owner = THIS_MODULE,
-		.name = TVP7002_MODULE_NAME,
-	},
-	.probe = tvp7002_probe,
-	.remove = tvp7002_remove,
-	.id_table = tvp7002_id,
-};
-
-module_i2c_driver(tvp7002_driver);
diff --git a/drivers/media/video/tvp7002_reg.h b/drivers/media/video/tvp7002_reg.h
deleted file mode 100644
index 0e34ca9..0000000
--- a/drivers/media/video/tvp7002_reg.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/* Texas Instruments Triple 8-/10-BIT 165-/110-MSPS Video and Graphics
- * Digitizer with Horizontal PLL registers
- *
- * Copyright (C) 2009 Texas Instruments Inc
- * Author: Santiago Nunez-Corrales <santiago.nunez@ridgerun.com>
- *
- * This code is partially based upon the TVP5150 driver
- * written by Mauro Carvalho Chehab (mchehab@infradead.org),
- * the TVP514x driver written by Vaibhav Hiremath <hvaibhav@ti.com>
- * and the TVP7002 driver in the TI LSP 2.10.00.14
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* Naming conventions
- * ------------------
- *
- * FDBK:  Feedback
- * DIV:   Divider
- * CTL:   Control
- * SEL:   Select
- * IN:    Input
- * OUT:   Output
- * R:     Red
- * G:     Green
- * B:     Blue
- * OFF:   Offset
- * THRS:  Threshold
- * DGTL:  Digital
- * LVL:   Level
- * PWR:   Power
- * MVIS:  Macrovision
- * W:     Width
- * H:     Height
- * ALGN:  Alignment
- * CLK:   Clocks
- * TOL:   Tolerance
- * BWTH:  Bandwidth
- * COEF:  Coefficient
- * STAT:  Status
- * AUTO:  Automatic
- * FLD:   Field
- * L:	  Line
- */
-
-#define TVP7002_CHIP_REV		0x00
-#define TVP7002_HPLL_FDBK_DIV_MSBS	0x01
-#define TVP7002_HPLL_FDBK_DIV_LSBS	0x02
-#define TVP7002_HPLL_CRTL		0x03
-#define TVP7002_HPLL_PHASE_SEL		0x04
-#define TVP7002_CLAMP_START		0x05
-#define TVP7002_CLAMP_W			0x06
-#define TVP7002_HSYNC_OUT_W		0x07
-#define TVP7002_B_FINE_GAIN		0x08
-#define TVP7002_G_FINE_GAIN		0x09
-#define TVP7002_R_FINE_GAIN		0x0a
-#define TVP7002_B_FINE_OFF_MSBS		0x0b
-#define TVP7002_G_FINE_OFF_MSBS         0x0c
-#define TVP7002_R_FINE_OFF_MSBS         0x0d
-#define TVP7002_SYNC_CTL_1		0x0e
-#define TVP7002_HPLL_AND_CLAMP_CTL	0x0f
-#define TVP7002_SYNC_ON_G_THRS		0x10
-#define TVP7002_SYNC_SEPARATOR_THRS	0x11
-#define TVP7002_HPLL_PRE_COAST		0x12
-#define TVP7002_HPLL_POST_COAST		0x13
-#define TVP7002_SYNC_DETECT_STAT	0x14
-#define TVP7002_OUT_FORMATTER		0x15
-#define TVP7002_MISC_CTL_1		0x16
-#define TVP7002_MISC_CTL_2              0x17
-#define TVP7002_MISC_CTL_3              0x18
-#define TVP7002_IN_MUX_SEL_1		0x19
-#define TVP7002_IN_MUX_SEL_2            0x1a
-#define TVP7002_B_AND_G_COARSE_GAIN	0x1b
-#define TVP7002_R_COARSE_GAIN		0x1c
-#define TVP7002_FINE_OFF_LSBS		0x1d
-#define TVP7002_B_COARSE_OFF		0x1e
-#define TVP7002_G_COARSE_OFF            0x1f
-#define TVP7002_R_COARSE_OFF            0x20
-#define TVP7002_HSOUT_OUT_START		0x21
-#define TVP7002_MISC_CTL_4		0x22
-#define TVP7002_B_DGTL_ALC_OUT_LSBS	0x23
-#define TVP7002_G_DGTL_ALC_OUT_LSBS     0x24
-#define TVP7002_R_DGTL_ALC_OUT_LSBS     0x25
-#define TVP7002_AUTO_LVL_CTL_ENABLE	0x26
-#define TVP7002_DGTL_ALC_OUT_MSBS	0x27
-#define TVP7002_AUTO_LVL_CTL_FILTER	0x28
-/* Reserved 0x29*/
-#define TVP7002_FINE_CLAMP_CTL		0x2a
-#define TVP7002_PWR_CTL			0x2b
-#define TVP7002_ADC_SETUP		0x2c
-#define TVP7002_COARSE_CLAMP_CTL	0x2d
-#define TVP7002_SOG_CLAMP		0x2e
-#define TVP7002_RGB_COARSE_CLAMP_CTL	0x2f
-#define TVP7002_SOG_COARSE_CLAMP_CTL	0x30
-#define TVP7002_ALC_PLACEMENT		0x31
-/* Reserved 0x32 */
-/* Reserved 0x33 */
-#define TVP7002_MVIS_STRIPPER_W		0x34
-#define TVP7002_VSYNC_ALGN		0x35
-#define TVP7002_SYNC_BYPASS		0x36
-#define TVP7002_L_FRAME_STAT_LSBS	0x37
-#define TVP7002_L_FRAME_STAT_MSBS	0x38
-#define TVP7002_CLK_L_STAT_LSBS		0x39
-#define TVP7002_CLK_L_STAT_MSBS      	0x3a
-#define TVP7002_HSYNC_W			0x3b
-#define TVP7002_VSYNC_W                 0x3c
-#define TVP7002_L_LENGTH_TOL 		0x3d
-/* Reserved 0x3e */
-#define TVP7002_VIDEO_BWTH_CTL		0x3f
-#define TVP7002_AVID_START_PIXEL_LSBS	0x40
-#define TVP7002_AVID_START_PIXEL_MSBS   0x41
-#define TVP7002_AVID_STOP_PIXEL_LSBS  	0x42
-#define TVP7002_AVID_STOP_PIXEL_MSBS    0x43
-#define TVP7002_VBLK_F_0_START_L_OFF	0x44
-#define TVP7002_VBLK_F_1_START_L_OFF    0x45
-#define TVP7002_VBLK_F_0_DURATION	0x46
-#define TVP7002_VBLK_F_1_DURATION       0x47
-#define TVP7002_FBIT_F_0_START_L_OFF	0x48
-#define TVP7002_FBIT_F_1_START_L_OFF    0x49
-#define TVP7002_YUV_Y_G_COEF_LSBS	0x4a
-#define TVP7002_YUV_Y_G_COEF_MSBS       0x4b
-#define TVP7002_YUV_Y_B_COEF_LSBS       0x4c
-#define TVP7002_YUV_Y_B_COEF_MSBS       0x4d
-#define TVP7002_YUV_Y_R_COEF_LSBS       0x4e
-#define TVP7002_YUV_Y_R_COEF_MSBS       0x4f
-#define TVP7002_YUV_U_G_COEF_LSBS       0x50
-#define TVP7002_YUV_U_G_COEF_MSBS       0x51
-#define TVP7002_YUV_U_B_COEF_LSBS       0x52
-#define TVP7002_YUV_U_B_COEF_MSBS       0x53
-#define TVP7002_YUV_U_R_COEF_LSBS       0x54
-#define TVP7002_YUV_U_R_COEF_MSBS       0x55
-#define TVP7002_YUV_V_G_COEF_LSBS       0x56
-#define TVP7002_YUV_V_G_COEF_MSBS       0x57
-#define TVP7002_YUV_V_B_COEF_LSBS       0x58
-#define TVP7002_YUV_V_B_COEF_MSBS       0x59
-#define TVP7002_YUV_V_R_COEF_LSBS       0x5a
-#define TVP7002_YUV_V_R_COEF_MSBS       0x5b
-
diff --git a/drivers/media/video/upd64031a.c b/drivers/media/video/upd64031a.c
deleted file mode 100644
index 1e74465..0000000
--- a/drivers/media/video/upd64031a.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * upd64031A - NEC Electronics Ghost Reduction for NTSC in Japan
- *
- * 2003 by T.Adachi <tadachi@tadachi-net.com>
- * 2003 by Takeru KOMORIYA <komoriya@paken.org>
- * 2006 by Hans Verkuil <hverkuil@xs4all.nl>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <linux/slab.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/upd64031a.h>
-
-/* --------------------- read registers functions define -------------------- */
-
-/* bit masks */
-#define GR_MODE_MASK              0xc0
-#define DIRECT_3DYCS_CONNECT_MASK 0xc0
-#define SYNC_CIRCUIT_MASK         0xa0
-
-/* -------------------------------------------------------------------------- */
-
-MODULE_DESCRIPTION("uPD64031A driver");
-MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil");
-MODULE_LICENSE("GPL");
-
-static int debug;
-module_param(debug, int, 0644);
-
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
-
-
-enum {
-	R00 = 0, R01, R02, R03, R04,
-	R05, R06, R07, R08, R09,
-	R0A, R0B, R0C, R0D, R0E, R0F,
-	/* unused registers
-	 R10, R11, R12, R13, R14,
-	 R15, R16, R17,
-	 */
-	TOT_REGS
-};
-
-struct upd64031a_state {
-	struct v4l2_subdev sd;
-	u8 regs[TOT_REGS];
-	u8 gr_mode;
-	u8 direct_3dycs_connect;
-	u8 ext_comp_sync;
-	u8 ext_vert_sync;
-};
-
-static inline struct upd64031a_state *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct upd64031a_state, sd);
-}
-
-static u8 upd64031a_init[] = {
-	0x00, 0xb8, 0x48, 0xd2, 0xe6,
-	0x03, 0x10, 0x0b, 0xaf, 0x7f,
-	0x00, 0x00, 0x1d, 0x5e, 0x00,
-	0xd0
-};
-
-/* ------------------------------------------------------------------------ */
-
-static u8 upd64031a_read(struct v4l2_subdev *sd, u8 reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u8 buf[2];
-
-	if (reg >= sizeof(buf))
-		return 0xff;
-	i2c_master_recv(client, buf, 2);
-	return buf[reg];
-}
-
-/* ------------------------------------------------------------------------ */
-
-static void upd64031a_write(struct v4l2_subdev *sd, u8 reg, u8 val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u8 buf[2];
-
-	buf[0] = reg;
-	buf[1] = val;
-	v4l2_dbg(1, debug, sd, "write reg: %02X val: %02X\n", reg, val);
-	if (i2c_master_send(client, buf, 2) != 2)
-		v4l2_err(sd, "I/O error write 0x%02x/0x%02x\n", reg, val);
-}
-
-/* ------------------------------------------------------------------------ */
-
-/* The input changed due to new input or channel changed */
-static int upd64031a_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *freq)
-{
-	struct upd64031a_state *state = to_state(sd);
-	u8 reg = state->regs[R00];
-
-	v4l2_dbg(1, debug, sd, "changed input or channel\n");
-	upd64031a_write(sd, R00, reg | 0x10);
-	upd64031a_write(sd, R00, reg & ~0x10);
-	return 0;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int upd64031a_s_routing(struct v4l2_subdev *sd,
-			       u32 input, u32 output, u32 config)
-{
-	struct upd64031a_state *state = to_state(sd);
-	u8 r00, r05, r08;
-
-	state->gr_mode = (input & 3) << 6;
-	state->direct_3dycs_connect = (input & 0xc) << 4;
-	state->ext_comp_sync =
-		(input & UPD64031A_COMPOSITE_EXTERNAL) << 1;
-	state->ext_vert_sync =
-		(input & UPD64031A_VERTICAL_EXTERNAL) << 2;
-	r00 = (state->regs[R00] & ~GR_MODE_MASK) | state->gr_mode;
-	r05 = (state->regs[R00] & ~SYNC_CIRCUIT_MASK) |
-		state->ext_comp_sync | state->ext_vert_sync;
-	r08 = (state->regs[R08] & ~DIRECT_3DYCS_CONNECT_MASK) |
-		state->direct_3dycs_connect;
-	upd64031a_write(sd, R00, r00);
-	upd64031a_write(sd, R05, r05);
-	upd64031a_write(sd, R08, r08);
-	return upd64031a_s_frequency(sd, NULL);
-}
-
-static int upd64031a_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_UPD64031A, 0);
-}
-
-static int upd64031a_log_status(struct v4l2_subdev *sd)
-{
-	v4l2_info(sd, "Status: SA00=0x%02x SA01=0x%02x\n",
-			upd64031a_read(sd, 0), upd64031a_read(sd, 1));
-	return 0;
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int upd64031a_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	reg->val = upd64031a_read(sd, reg->reg & 0xff);
-	reg->size = 1;
-	return 0;
-}
-
-static int upd64031a_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	upd64031a_write(sd, reg->reg & 0xff, reg->val & 0xff);
-	return 0;
-}
-#endif
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops upd64031a_core_ops = {
-	.log_status = upd64031a_log_status,
-	.g_chip_ident = upd64031a_g_chip_ident,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.g_register = upd64031a_g_register,
-	.s_register = upd64031a_s_register,
-#endif
-};
-
-static const struct v4l2_subdev_tuner_ops upd64031a_tuner_ops = {
-	.s_frequency = upd64031a_s_frequency,
-};
-
-static const struct v4l2_subdev_video_ops upd64031a_video_ops = {
-	.s_routing = upd64031a_s_routing,
-};
-
-static const struct v4l2_subdev_ops upd64031a_ops = {
-	.core = &upd64031a_core_ops,
-	.tuner = &upd64031a_tuner_ops,
-	.video = &upd64031a_video_ops,
-};
-
-/* ------------------------------------------------------------------------ */
-
-/* i2c implementation */
-
-static int upd64031a_probe(struct i2c_client *client,
-			   const struct i2c_device_id *id)
-{
-	struct upd64031a_state *state;
-	struct v4l2_subdev *sd;
-	int i;
-
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -EIO;
-
-	v4l_info(client, "chip found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	state = kzalloc(sizeof(struct upd64031a_state), GFP_KERNEL);
-	if (state == NULL)
-		return -ENOMEM;
-	sd = &state->sd;
-	v4l2_i2c_subdev_init(sd, client, &upd64031a_ops);
-	memcpy(state->regs, upd64031a_init, sizeof(state->regs));
-	state->gr_mode = UPD64031A_GR_ON << 6;
-	state->direct_3dycs_connect = UPD64031A_3DYCS_COMPOSITE << 4;
-	state->ext_comp_sync = state->ext_vert_sync = 0;
-	for (i = 0; i < TOT_REGS; i++)
-		upd64031a_write(sd, i, state->regs[i]);
-	return 0;
-}
-
-static int upd64031a_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-
-	v4l2_device_unregister_subdev(sd);
-	kfree(to_state(sd));
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct i2c_device_id upd64031a_id[] = {
-	{ "upd64031a", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, upd64031a_id);
-
-static struct i2c_driver upd64031a_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "upd64031a",
-	},
-	.probe		= upd64031a_probe,
-	.remove		= upd64031a_remove,
-	.id_table	= upd64031a_id,
-};
-
-module_i2c_driver(upd64031a_driver);
diff --git a/drivers/media/video/upd64083.c b/drivers/media/video/upd64083.c
deleted file mode 100644
index 75d6acc..0000000
--- a/drivers/media/video/upd64083.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * upd6408x - NEC Electronics 3-Dimensional Y/C separation driver
- *
- * 2003 by T.Adachi (tadachi@tadachi-net.com)
- * 2003 by Takeru KOMORIYA <komoriya@paken.org>
- * 2006 by Hans Verkuil <hverkuil@xs4all.nl>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <linux/slab.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/upd64083.h>
-
-MODULE_DESCRIPTION("uPD64083 driver");
-MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil");
-MODULE_LICENSE("GPL");
-
-static bool debug;
-module_param(debug, bool, 0644);
-
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
-
-
-enum {
-	R00 = 0, R01, R02, R03, R04,
-	R05, R06, R07, R08, R09,
-	R0A, R0B, R0C, R0D, R0E, R0F,
-	R10, R11, R12, R13, R14,
-	R15, R16,
-	TOT_REGS
-};
-
-struct upd64083_state {
-	struct v4l2_subdev sd;
-	u8 mode;
-	u8 ext_y_adc;
-	u8 regs[TOT_REGS];
-};
-
-static inline struct upd64083_state *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct upd64083_state, sd);
-}
-
-/* Initial values when used in combination with the
-   NEC upd64031a ghost reduction chip. */
-static u8 upd64083_init[] = {
-	0x1f, 0x01, 0xa0, 0x2d, 0x29,  /* we use EXCSS=0 */
-	0x36, 0xdd, 0x05, 0x56, 0x48,
-	0x00, 0x3a, 0xa0, 0x05, 0x08,
-	0x44, 0x60, 0x08, 0x52, 0xf8,
-	0x53, 0x60, 0x10
-};
-
-/* ------------------------------------------------------------------------ */
-
-static void upd64083_write(struct v4l2_subdev *sd, u8 reg, u8 val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u8 buf[2];
-
-	buf[0] = reg;
-	buf[1] = val;
-	v4l2_dbg(1, debug, sd, "write reg: %02x val: %02x\n", reg, val);
-	if (i2c_master_send(client, buf, 2) != 2)
-		v4l2_err(sd, "I/O error write 0x%02x/0x%02x\n", reg, val);
-}
-
-/* ------------------------------------------------------------------------ */
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static u8 upd64083_read(struct v4l2_subdev *sd, u8 reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u8 buf[7];
-
-	if (reg >= sizeof(buf))
-		return 0xff;
-	i2c_master_recv(client, buf, sizeof(buf));
-	return buf[reg];
-}
-#endif
-
-/* ------------------------------------------------------------------------ */
-
-static int upd64083_s_routing(struct v4l2_subdev *sd,
-			      u32 input, u32 output, u32 config)
-{
-	struct upd64083_state *state = to_state(sd);
-	u8 r00, r02;
-
-	if (input > 7 || (input & 6) == 6)
-		return -EINVAL;
-	state->mode = (input & 3) << 6;
-	state->ext_y_adc = (input & UPD64083_EXT_Y_ADC) << 3;
-	r00 = (state->regs[R00] & ~(3 << 6)) | state->mode;
-	r02 = (state->regs[R02] & ~(1 << 5)) | state->ext_y_adc;
-	upd64083_write(sd, R00, r00);
-	upd64083_write(sd, R02, r02);
-	return 0;
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int upd64083_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	reg->val = upd64083_read(sd, reg->reg & 0xff);
-	reg->size = 1;
-	return 0;
-}
-
-static int upd64083_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	upd64083_write(sd, reg->reg & 0xff, reg->val & 0xff);
-	return 0;
-}
-#endif
-
-static int upd64083_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_UPD64083, 0);
-}
-
-static int upd64083_log_status(struct v4l2_subdev *sd)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u8 buf[7];
-
-	i2c_master_recv(client, buf, 7);
-	v4l2_info(sd, "Status: SA00=%02x SA01=%02x SA02=%02x SA03=%02x "
-		      "SA04=%02x SA05=%02x SA06=%02x\n",
-		buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops upd64083_core_ops = {
-	.log_status = upd64083_log_status,
-	.g_chip_ident = upd64083_g_chip_ident,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.g_register = upd64083_g_register,
-	.s_register = upd64083_s_register,
-#endif
-};
-
-static const struct v4l2_subdev_video_ops upd64083_video_ops = {
-	.s_routing = upd64083_s_routing,
-};
-
-static const struct v4l2_subdev_ops upd64083_ops = {
-	.core = &upd64083_core_ops,
-	.video = &upd64083_video_ops,
-};
-
-/* ------------------------------------------------------------------------ */
-
-/* i2c implementation */
-
-static int upd64083_probe(struct i2c_client *client,
-			  const struct i2c_device_id *id)
-{
-	struct upd64083_state *state;
-	struct v4l2_subdev *sd;
-	int i;
-
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -EIO;
-
-	v4l_info(client, "chip found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	state = kzalloc(sizeof(struct upd64083_state), GFP_KERNEL);
-	if (state == NULL)
-		return -ENOMEM;
-	sd = &state->sd;
-	v4l2_i2c_subdev_init(sd, client, &upd64083_ops);
-	/* Initially assume that a ghost reduction chip is present */
-	state->mode = 0;  /* YCS mode */
-	state->ext_y_adc = (1 << 5);
-	memcpy(state->regs, upd64083_init, TOT_REGS);
-	for (i = 0; i < TOT_REGS; i++)
-		upd64083_write(sd, i, state->regs[i]);
-	return 0;
-}
-
-static int upd64083_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-
-	v4l2_device_unregister_subdev(sd);
-	kfree(to_state(sd));
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct i2c_device_id upd64083_id[] = {
-	{ "upd64083", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, upd64083_id);
-
-static struct i2c_driver upd64083_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "upd64083",
-	},
-	.probe		= upd64083_probe,
-	.remove		= upd64083_remove,
-	.id_table	= upd64083_id,
-};
-
-module_i2c_driver(upd64083_driver);
diff --git a/drivers/media/video/vp27smpx.c b/drivers/media/video/vp27smpx.c
deleted file mode 100644
index 7cfbc9d..0000000
--- a/drivers/media/video/vp27smpx.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * vp27smpx - driver version 0.0.1
- *
- * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
- *
- * Based on a tvaudio patch from Takahiro Adachi <tadachi@tadachi-net.com>
- * and Kazuhiko Kawakami <kazz-0@mail.goo.ne.jp>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/ioctl.h>
-#include <asm/uaccess.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-
-MODULE_DESCRIPTION("vp27smpx driver");
-MODULE_AUTHOR("Hans Verkuil");
-MODULE_LICENSE("GPL");
-
-
-/* ----------------------------------------------------------------------- */
-
-struct vp27smpx_state {
-	struct v4l2_subdev sd;
-	int radio;
-	u32 audmode;
-};
-
-static inline struct vp27smpx_state *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct vp27smpx_state, sd);
-}
-
-static void vp27smpx_set_audmode(struct v4l2_subdev *sd, u32 audmode)
-{
-	struct vp27smpx_state *state = to_state(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u8 data[3] = { 0x00, 0x00, 0x04 };
-
-	switch (audmode) {
-	case V4L2_TUNER_MODE_MONO:
-	case V4L2_TUNER_MODE_LANG1:
-		break;
-	case V4L2_TUNER_MODE_STEREO:
-	case V4L2_TUNER_MODE_LANG1_LANG2:
-		data[1] = 0x01;
-		break;
-	case V4L2_TUNER_MODE_LANG2:
-		data[1] = 0x02;
-		break;
-	}
-
-	if (i2c_master_send(client, data, sizeof(data)) != sizeof(data))
-		v4l2_err(sd, "I/O error setting audmode\n");
-	else
-		state->audmode = audmode;
-}
-
-static int vp27smpx_s_radio(struct v4l2_subdev *sd)
-{
-	struct vp27smpx_state *state = to_state(sd);
-
-	state->radio = 1;
-	return 0;
-}
-
-static int vp27smpx_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
-{
-	struct vp27smpx_state *state = to_state(sd);
-
-	state->radio = 0;
-	return 0;
-}
-
-static int vp27smpx_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
-{
-	struct vp27smpx_state *state = to_state(sd);
-
-	if (!state->radio)
-		vp27smpx_set_audmode(sd, vt->audmode);
-	return 0;
-}
-
-static int vp27smpx_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
-{
-	struct vp27smpx_state *state = to_state(sd);
-
-	if (state->radio)
-		return 0;
-	vt->audmode = state->audmode;
-	vt->capability = V4L2_TUNER_CAP_STEREO |
-		V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2;
-	vt->rxsubchans = V4L2_TUNER_SUB_MONO;
-	return 0;
-}
-
-static int vp27smpx_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_VP27SMPX, 0);
-}
-
-static int vp27smpx_log_status(struct v4l2_subdev *sd)
-{
-	struct vp27smpx_state *state = to_state(sd);
-
-	v4l2_info(sd, "Audio Mode: %u%s\n", state->audmode,
-			state->radio ? " (Radio)" : "");
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_subdev_core_ops vp27smpx_core_ops = {
-	.log_status = vp27smpx_log_status,
-	.g_chip_ident = vp27smpx_g_chip_ident,
-	.s_std = vp27smpx_s_std,
-};
-
-static const struct v4l2_subdev_tuner_ops vp27smpx_tuner_ops = {
-	.s_radio = vp27smpx_s_radio,
-	.s_tuner = vp27smpx_s_tuner,
-	.g_tuner = vp27smpx_g_tuner,
-};
-
-static const struct v4l2_subdev_ops vp27smpx_ops = {
-	.core = &vp27smpx_core_ops,
-	.tuner = &vp27smpx_tuner_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-/* i2c implementation */
-
-/*
- * Generic i2c probe
- * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
- */
-
-static int vp27smpx_probe(struct i2c_client *client,
-			  const struct i2c_device_id *id)
-{
-	struct vp27smpx_state *state;
-	struct v4l2_subdev *sd;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -EIO;
-
-	v4l_info(client, "chip found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	state = kzalloc(sizeof(struct vp27smpx_state), GFP_KERNEL);
-	if (state == NULL)
-		return -ENOMEM;
-	sd = &state->sd;
-	v4l2_i2c_subdev_init(sd, client, &vp27smpx_ops);
-	state->audmode = V4L2_TUNER_MODE_STEREO;
-
-	/* initialize vp27smpx */
-	vp27smpx_set_audmode(sd, state->audmode);
-	return 0;
-}
-
-static int vp27smpx_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-
-	v4l2_device_unregister_subdev(sd);
-	kfree(to_state(sd));
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct i2c_device_id vp27smpx_id[] = {
-	{ "vp27smpx", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, vp27smpx_id);
-
-static struct i2c_driver vp27smpx_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "vp27smpx",
-	},
-	.probe		= vp27smpx_probe,
-	.remove		= vp27smpx_remove,
-	.id_table	= vp27smpx_id,
-};
-
-module_i2c_driver(vp27smpx_driver);
diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c
deleted file mode 100644
index 2f67b4c..0000000
--- a/drivers/media/video/vpx3220.c
+++ /dev/null
@@ -1,591 +0,0 @@
-/*
- * vpx3220a, vpx3216b & vpx3214c video decoder driver version 0.0.1
- *
- * Copyright (C) 2001 Laurent Pinchart <lpinchart@freegates.be>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <asm/uaccess.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-ctrls.h>
-
-MODULE_DESCRIPTION("vpx3220a/vpx3216b/vpx3214c video decoder driver");
-MODULE_AUTHOR("Laurent Pinchart");
-MODULE_LICENSE("GPL");
-
-static int debug;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
-
-
-#define VPX_TIMEOUT_COUNT  10
-
-/* ----------------------------------------------------------------------- */
-
-struct vpx3220 {
-	struct v4l2_subdev sd;
-	struct v4l2_ctrl_handler hdl;
-	unsigned char reg[255];
-
-	v4l2_std_id norm;
-	int ident;
-	int input;
-	int enable;
-};
-
-static inline struct vpx3220 *to_vpx3220(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct vpx3220, sd);
-}
-
-static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
-{
-	return &container_of(ctrl->handler, struct vpx3220, hdl)->sd;
-}
-
-static char *inputs[] = { "internal", "composite", "svideo" };
-
-/* ----------------------------------------------------------------------- */
-
-static inline int vpx3220_write(struct v4l2_subdev *sd, u8 reg, u8 value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct vpx3220 *decoder = i2c_get_clientdata(client);
-
-	decoder->reg[reg] = value;
-	return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-static inline int vpx3220_read(struct v4l2_subdev *sd, u8 reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int vpx3220_fp_status(struct v4l2_subdev *sd)
-{
-	unsigned char status;
-	unsigned int i;
-
-	for (i = 0; i < VPX_TIMEOUT_COUNT; i++) {
-		status = vpx3220_read(sd, 0x29);
-
-		if (!(status & 4))
-			return 0;
-
-		udelay(10);
-
-		if (need_resched())
-			cond_resched();
-	}
-
-	return -1;
-}
-
-static int vpx3220_fp_write(struct v4l2_subdev *sd, u8 fpaddr, u16 data)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	/* Write the 16-bit address to the FPWR register */
-	if (i2c_smbus_write_word_data(client, 0x27, swab16(fpaddr)) == -1) {
-		v4l2_dbg(1, debug, sd, "%s: failed\n", __func__);
-		return -1;
-	}
-
-	if (vpx3220_fp_status(sd) < 0)
-		return -1;
-
-	/* Write the 16-bit data to the FPDAT register */
-	if (i2c_smbus_write_word_data(client, 0x28, swab16(data)) == -1) {
-		v4l2_dbg(1, debug, sd, "%s: failed\n", __func__);
-		return -1;
-	}
-
-	return 0;
-}
-
-static u16 vpx3220_fp_read(struct v4l2_subdev *sd, u16 fpaddr)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	s16 data;
-
-	/* Write the 16-bit address to the FPRD register */
-	if (i2c_smbus_write_word_data(client, 0x26, swab16(fpaddr)) == -1) {
-		v4l2_dbg(1, debug, sd, "%s: failed\n", __func__);
-		return -1;
-	}
-
-	if (vpx3220_fp_status(sd) < 0)
-		return -1;
-
-	/* Read the 16-bit data from the FPDAT register */
-	data = i2c_smbus_read_word_data(client, 0x28);
-	if (data == -1) {
-		v4l2_dbg(1, debug, sd, "%s: failed\n", __func__);
-		return -1;
-	}
-
-	return swab16(data);
-}
-
-static int vpx3220_write_block(struct v4l2_subdev *sd, const u8 *data, unsigned int len)
-{
-	u8 reg;
-	int ret = -1;
-
-	while (len >= 2) {
-		reg = *data++;
-		ret = vpx3220_write(sd, reg, *data++);
-		if (ret < 0)
-			break;
-		len -= 2;
-	}
-
-	return ret;
-}
-
-static int vpx3220_write_fp_block(struct v4l2_subdev *sd,
-		const u16 *data, unsigned int len)
-{
-	u8 reg;
-	int ret = 0;
-
-	while (len > 1) {
-		reg = *data++;
-		ret |= vpx3220_fp_write(sd, reg, *data++);
-		len -= 2;
-	}
-
-	return ret;
-}
-
-/* ---------------------------------------------------------------------- */
-
-static const unsigned short init_ntsc[] = {
-	0x1c, 0x00,		/* NTSC tint angle */
-	0x88, 17,		/* Window 1 vertical */
-	0x89, 240,		/* Vertical lines in */
-	0x8a, 240,		/* Vertical lines out */
-	0x8b, 000,		/* Horizontal begin */
-	0x8c, 640,		/* Horizontal length */
-	0x8d, 640,		/* Number of pixels */
-	0x8f, 0xc00,		/* Disable window 2 */
-	0xf0, 0x73,		/* 13.5 MHz transport, Forced
-				 * mode, latch windows */
-	0xf2, 0x13,		/* NTSC M, composite input */
-	0xe7, 0x1e1,		/* Enable vertical standard
-				 * locking @ 240 lines */
-};
-
-static const unsigned short init_pal[] = {
-	0x88, 23,		/* Window 1 vertical begin */
-	0x89, 288,		/* Vertical lines in (16 lines
-				 * skipped by the VFE) */
-	0x8a, 288,		/* Vertical lines out (16 lines
-				 * skipped by the VFE) */
-	0x8b, 16,		/* Horizontal begin */
-	0x8c, 768,		/* Horizontal length */
-	0x8d, 784, 		/* Number of pixels
-				 * Must be >= Horizontal begin + Horizontal length */
-	0x8f, 0xc00,		/* Disable window 2 */
-	0xf0, 0x77,		/* 13.5 MHz transport, Forced
-				 * mode, latch windows */
-	0xf2, 0x3d1,		/* PAL B,G,H,I, composite input */
-	0xe7, 0x241,		/* PAL/SECAM set to 288 lines */
-};
-
-static const unsigned short init_secam[] = {
-	0x88, 23,		/* Window 1 vertical begin */
-	0x89, 288,		/* Vertical lines in (16 lines
-				 * skipped by the VFE) */
-	0x8a, 288,		/* Vertical lines out (16 lines
-				 * skipped by the VFE) */
-	0x8b, 16,		/* Horizontal begin */
-	0x8c, 768,		/* Horizontal length */
-	0x8d, 784,		/* Number of pixels
-				 * Must be >= Horizontal begin + Horizontal length */
-	0x8f, 0xc00,		/* Disable window 2 */
-	0xf0, 0x77,		/* 13.5 MHz transport, Forced
-				 * mode, latch windows */
-	0xf2, 0x3d5,		/* SECAM, composite input */
-	0xe7, 0x241,		/* PAL/SECAM set to 288 lines */
-};
-
-static const unsigned char init_common[] = {
-	0xf2, 0x00,		/* Disable all outputs */
-	0x33, 0x0d,		/* Luma : VIN2, Chroma : CIN
-				 * (clamp off) */
-	0xd8, 0xa8,		/* HREF/VREF active high, VREF
-				 * pulse = 2, Odd/Even flag */
-	0x20, 0x03,		/* IF compensation 0dB/oct */
-	0xe0, 0xff,		/* Open up all comparators */
-	0xe1, 0x00,
-	0xe2, 0x7f,
-	0xe3, 0x80,
-	0xe4, 0x7f,
-	0xe5, 0x80,
-	0xe6, 0x00,		/* Brightness set to 0 */
-	0xe7, 0xe0,		/* Contrast to 1.0, noise shaping
-				 * 10 to 8 2-bit error diffusion */
-	0xe8, 0xf8,		/* YUV422, CbCr binary offset,
-				 * ... (p.32) */
-	0xea, 0x18,		/* LLC2 connected, output FIFO
-				 * reset with VACTintern */
-	0xf0, 0x8a,		/* Half full level to 10, bus
-				 * shuffler [7:0, 23:16, 15:8] */
-	0xf1, 0x18,		/* Single clock, sync mode, no
-				 * FE delay, no HLEN counter */
-	0xf8, 0x12,		/* Port A, PIXCLK, HF# & FE#
-				 * strength to 2 */
-	0xf9, 0x24,		/* Port B, HREF, VREF, PREF &
-				 * ALPHA strength to 4 */
-};
-
-static const unsigned short init_fp[] = {
-	0x59, 0,
-	0xa0, 2070,		/* ACC reference */
-	0xa3, 0,
-	0xa4, 0,
-	0xa8, 30,
-	0xb2, 768,
-	0xbe, 27,
-	0x58, 0,
-	0x26, 0,
-	0x4b, 0x298,		/* PLL gain */
-};
-
-
-static int vpx3220_init(struct v4l2_subdev *sd, u32 val)
-{
-	struct vpx3220 *decoder = to_vpx3220(sd);
-
-	vpx3220_write_block(sd, init_common, sizeof(init_common));
-	vpx3220_write_fp_block(sd, init_fp, sizeof(init_fp) >> 1);
-	if (decoder->norm & V4L2_STD_NTSC)
-		vpx3220_write_fp_block(sd, init_ntsc, sizeof(init_ntsc) >> 1);
-	else if (decoder->norm & V4L2_STD_PAL)
-		vpx3220_write_fp_block(sd, init_pal, sizeof(init_pal) >> 1);
-	else if (decoder->norm & V4L2_STD_SECAM)
-		vpx3220_write_fp_block(sd, init_secam, sizeof(init_secam) >> 1);
-	else
-		vpx3220_write_fp_block(sd, init_pal, sizeof(init_pal) >> 1);
-	return 0;
-}
-
-static int vpx3220_status(struct v4l2_subdev *sd, u32 *pstatus, v4l2_std_id *pstd)
-{
-	int res = V4L2_IN_ST_NO_SIGNAL, status;
-	v4l2_std_id std = 0;
-
-	status = vpx3220_fp_read(sd, 0x0f3);
-
-	v4l2_dbg(1, debug, sd, "status: 0x%04x\n", status);
-
-	if (status < 0)
-		return status;
-
-	if ((status & 0x20) == 0) {
-		res = 0;
-
-		switch (status & 0x18) {
-		case 0x00:
-		case 0x10:
-		case 0x14:
-		case 0x18:
-			std = V4L2_STD_PAL;
-			break;
-
-		case 0x08:
-			std = V4L2_STD_SECAM;
-			break;
-
-		case 0x04:
-		case 0x0c:
-		case 0x1c:
-			std = V4L2_STD_NTSC;
-			break;
-		}
-	}
-	if (pstd)
-		*pstd = std;
-	if (pstatus)
-		*pstatus = res;
-	return 0;
-}
-
-static int vpx3220_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
-{
-	v4l2_dbg(1, debug, sd, "querystd\n");
-	return vpx3220_status(sd, NULL, std);
-}
-
-static int vpx3220_g_input_status(struct v4l2_subdev *sd, u32 *status)
-{
-	v4l2_dbg(1, debug, sd, "g_input_status\n");
-	return vpx3220_status(sd, status, NULL);
-}
-
-static int vpx3220_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
-{
-	struct vpx3220 *decoder = to_vpx3220(sd);
-	int temp_input;
-
-	/* Here we back up the input selection because it gets
-	   overwritten when we fill the registers with the
-	   chosen video norm */
-	temp_input = vpx3220_fp_read(sd, 0xf2);
-
-	v4l2_dbg(1, debug, sd, "s_std %llx\n", (unsigned long long)std);
-	if (std & V4L2_STD_NTSC) {
-		vpx3220_write_fp_block(sd, init_ntsc, sizeof(init_ntsc) >> 1);
-		v4l2_dbg(1, debug, sd, "norm switched to NTSC\n");
-	} else if (std & V4L2_STD_PAL) {
-		vpx3220_write_fp_block(sd, init_pal, sizeof(init_pal) >> 1);
-		v4l2_dbg(1, debug, sd, "norm switched to PAL\n");
-	} else if (std & V4L2_STD_SECAM) {
-		vpx3220_write_fp_block(sd, init_secam, sizeof(init_secam) >> 1);
-		v4l2_dbg(1, debug, sd, "norm switched to SECAM\n");
-	} else {
-		return -EINVAL;
-	}
-
-	decoder->norm = std;
-
-	/* And here we set the backed up video input again */
-	vpx3220_fp_write(sd, 0xf2, temp_input | 0x0010);
-	udelay(10);
-	return 0;
-}
-
-static int vpx3220_s_routing(struct v4l2_subdev *sd,
-			     u32 input, u32 output, u32 config)
-{
-	int data;
-
-	/* RJ:   input = 0: ST8 (PCTV) input
-		 input = 1: COMPOSITE  input
-		 input = 2: SVHS       input  */
-
-	const int input_vals[3][2] = {
-		{0x0c, 0},
-		{0x0d, 0},
-		{0x0e, 1}
-	};
-
-	if (input > 2)
-		return -EINVAL;
-
-	v4l2_dbg(1, debug, sd, "input switched to %s\n", inputs[input]);
-
-	vpx3220_write(sd, 0x33, input_vals[input][0]);
-
-	data = vpx3220_fp_read(sd, 0xf2) & ~(0x0020);
-	if (data < 0)
-		return data;
-	/* 0x0010 is required to latch the setting */
-	vpx3220_fp_write(sd, 0xf2,
-			data | (input_vals[input][1] << 5) | 0x0010);
-
-	udelay(10);
-	return 0;
-}
-
-static int vpx3220_s_stream(struct v4l2_subdev *sd, int enable)
-{
-	v4l2_dbg(1, debug, sd, "s_stream %s\n", enable ? "on" : "off");
-
-	vpx3220_write(sd, 0xf2, (enable ? 0x1b : 0x00));
-	return 0;
-}
-
-static int vpx3220_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-
-	switch (ctrl->id) {
-	case V4L2_CID_BRIGHTNESS:
-		vpx3220_write(sd, 0xe6, ctrl->val);
-		return 0;
-	case V4L2_CID_CONTRAST:
-		/* Bit 7 and 8 is for noise shaping */
-		vpx3220_write(sd, 0xe7, ctrl->val + 192);
-		return 0;
-	case V4L2_CID_SATURATION:
-		vpx3220_fp_write(sd, 0xa0, ctrl->val);
-		return 0;
-	case V4L2_CID_HUE:
-		vpx3220_fp_write(sd, 0x1c, ctrl->val);
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static int vpx3220_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct vpx3220 *decoder = to_vpx3220(sd);
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, decoder->ident, 0);
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_ctrl_ops vpx3220_ctrl_ops = {
-	.s_ctrl = vpx3220_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops vpx3220_core_ops = {
-	.g_chip_ident = vpx3220_g_chip_ident,
-	.init = vpx3220_init,
-	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
-	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
-	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
-	.g_ctrl = v4l2_subdev_g_ctrl,
-	.s_ctrl = v4l2_subdev_s_ctrl,
-	.queryctrl = v4l2_subdev_queryctrl,
-	.querymenu = v4l2_subdev_querymenu,
-	.s_std = vpx3220_s_std,
-};
-
-static const struct v4l2_subdev_video_ops vpx3220_video_ops = {
-	.s_routing = vpx3220_s_routing,
-	.s_stream = vpx3220_s_stream,
-	.querystd = vpx3220_querystd,
-	.g_input_status = vpx3220_g_input_status,
-};
-
-static const struct v4l2_subdev_ops vpx3220_ops = {
-	.core = &vpx3220_core_ops,
-	.video = &vpx3220_video_ops,
-};
-
-/* -----------------------------------------------------------------------
- * Client management code
- */
-
-static int vpx3220_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	struct vpx3220 *decoder;
-	struct v4l2_subdev *sd;
-	const char *name = NULL;
-	u8 ver;
-	u16 pn;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter,
-		I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
-		return -ENODEV;
-
-	decoder = kzalloc(sizeof(struct vpx3220), GFP_KERNEL);
-	if (decoder == NULL)
-		return -ENOMEM;
-	sd = &decoder->sd;
-	v4l2_i2c_subdev_init(sd, client, &vpx3220_ops);
-	decoder->norm = V4L2_STD_PAL;
-	decoder->input = 0;
-	decoder->enable = 1;
-	v4l2_ctrl_handler_init(&decoder->hdl, 4);
-	v4l2_ctrl_new_std(&decoder->hdl, &vpx3220_ctrl_ops,
-		V4L2_CID_BRIGHTNESS, -128, 127, 1, 0);
-	v4l2_ctrl_new_std(&decoder->hdl, &vpx3220_ctrl_ops,
-		V4L2_CID_CONTRAST, 0, 63, 1, 32);
-	v4l2_ctrl_new_std(&decoder->hdl, &vpx3220_ctrl_ops,
-		V4L2_CID_SATURATION, 0, 4095, 1, 2048);
-	v4l2_ctrl_new_std(&decoder->hdl, &vpx3220_ctrl_ops,
-		V4L2_CID_HUE, -512, 511, 1, 0);
-	sd->ctrl_handler = &decoder->hdl;
-	if (decoder->hdl.error) {
-		int err = decoder->hdl.error;
-
-		v4l2_ctrl_handler_free(&decoder->hdl);
-		kfree(decoder);
-		return err;
-	}
-	v4l2_ctrl_handler_setup(&decoder->hdl);
-
-	ver = i2c_smbus_read_byte_data(client, 0x00);
-	pn = (i2c_smbus_read_byte_data(client, 0x02) << 8) +
-		i2c_smbus_read_byte_data(client, 0x01);
-	decoder->ident = V4L2_IDENT_VPX3220A;
-	if (ver == 0xec) {
-		switch (pn) {
-		case 0x4680:
-			name = "vpx3220a";
-			break;
-		case 0x4260:
-			name = "vpx3216b";
-			decoder->ident = V4L2_IDENT_VPX3216B;
-			break;
-		case 0x4280:
-			name = "vpx3214c";
-			decoder->ident = V4L2_IDENT_VPX3214C;
-			break;
-		}
-	}
-	if (name)
-		v4l2_info(sd, "%s found @ 0x%x (%s)\n", name,
-			client->addr << 1, client->adapter->name);
-	else
-		v4l2_info(sd, "chip (%02x:%04x) found @ 0x%x (%s)\n",
-			ver, pn, client->addr << 1, client->adapter->name);
-
-	vpx3220_write_block(sd, init_common, sizeof(init_common));
-	vpx3220_write_fp_block(sd, init_fp, sizeof(init_fp) >> 1);
-	/* Default to PAL */
-	vpx3220_write_fp_block(sd, init_pal, sizeof(init_pal) >> 1);
-	return 0;
-}
-
-static int vpx3220_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct vpx3220 *decoder = to_vpx3220(sd);
-
-	v4l2_device_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(&decoder->hdl);
-	kfree(decoder);
-	return 0;
-}
-
-static const struct i2c_device_id vpx3220_id[] = {
-	{ "vpx3220a", 0 },
-	{ "vpx3216b", 0 },
-	{ "vpx3214c", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, vpx3220_id);
-
-static struct i2c_driver vpx3220_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "vpx3220",
-	},
-	.probe		= vpx3220_probe,
-	.remove		= vpx3220_remove,
-	.id_table	= vpx3220_id,
-};
-
-module_i2c_driver(vpx3220_driver);
diff --git a/drivers/media/video/vs6624.c b/drivers/media/video/vs6624.c
deleted file mode 100644
index 42ae9dc..0000000
--- a/drivers/media/video/vs6624.c
+++ /dev/null
@@ -1,928 +0,0 @@
-/*
- * vs6624.c ST VS6624 CMOS image sensor driver
- *
- * Copyright (c) 2011 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/videodev2.h>
-
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-mediabus.h>
-
-#include "vs6624_regs.h"
-
-#define VGA_WIDTH       640
-#define VGA_HEIGHT      480
-#define QVGA_WIDTH      320
-#define QVGA_HEIGHT     240
-#define QQVGA_WIDTH     160
-#define QQVGA_HEIGHT    120
-#define CIF_WIDTH       352
-#define CIF_HEIGHT      288
-#define QCIF_WIDTH      176
-#define QCIF_HEIGHT     144
-#define QQCIF_WIDTH     88
-#define QQCIF_HEIGHT    72
-
-#define MAX_FRAME_RATE  30
-
-struct vs6624 {
-	struct v4l2_subdev sd;
-	struct v4l2_ctrl_handler hdl;
-	struct v4l2_fract frame_rate;
-	struct v4l2_mbus_framefmt fmt;
-	unsigned ce_pin;
-};
-
-static const struct vs6624_format {
-	enum v4l2_mbus_pixelcode mbus_code;
-	enum v4l2_colorspace colorspace;
-} vs6624_formats[] = {
-	{
-		.mbus_code      = V4L2_MBUS_FMT_UYVY8_2X8,
-		.colorspace     = V4L2_COLORSPACE_JPEG,
-	},
-	{
-		.mbus_code      = V4L2_MBUS_FMT_YUYV8_2X8,
-		.colorspace     = V4L2_COLORSPACE_JPEG,
-	},
-	{
-		.mbus_code      = V4L2_MBUS_FMT_RGB565_2X8_LE,
-		.colorspace     = V4L2_COLORSPACE_SRGB,
-	},
-};
-
-static struct v4l2_mbus_framefmt vs6624_default_fmt = {
-	.width = VGA_WIDTH,
-	.height = VGA_HEIGHT,
-	.code = V4L2_MBUS_FMT_UYVY8_2X8,
-	.field = V4L2_FIELD_NONE,
-	.colorspace = V4L2_COLORSPACE_JPEG,
-};
-
-static const u16 vs6624_p1[] = {
-	0x8104, 0x03,
-	0x8105, 0x01,
-	0xc900, 0x03,
-	0xc904, 0x47,
-	0xc905, 0x10,
-	0xc906, 0x80,
-	0xc907, 0x3a,
-	0x903a, 0x02,
-	0x903b, 0x47,
-	0x903c, 0x15,
-	0xc908, 0x31,
-	0xc909, 0xdc,
-	0xc90a, 0x80,
-	0xc90b, 0x44,
-	0x9044, 0x02,
-	0x9045, 0x31,
-	0x9046, 0xe2,
-	0xc90c, 0x07,
-	0xc90d, 0xe0,
-	0xc90e, 0x80,
-	0xc90f, 0x47,
-	0x9047, 0x90,
-	0x9048, 0x83,
-	0x9049, 0x81,
-	0x904a, 0xe0,
-	0x904b, 0x60,
-	0x904c, 0x08,
-	0x904d, 0x90,
-	0x904e, 0xc0,
-	0x904f, 0x43,
-	0x9050, 0x74,
-	0x9051, 0x01,
-	0x9052, 0xf0,
-	0x9053, 0x80,
-	0x9054, 0x05,
-	0x9055, 0xE4,
-	0x9056, 0x90,
-	0x9057, 0xc0,
-	0x9058, 0x43,
-	0x9059, 0xf0,
-	0x905a, 0x02,
-	0x905b, 0x07,
-	0x905c, 0xec,
-	0xc910, 0x5d,
-	0xc911, 0xca,
-	0xc912, 0x80,
-	0xc913, 0x5d,
-	0x905d, 0xa3,
-	0x905e, 0x04,
-	0x905f, 0xf0,
-	0x9060, 0xa3,
-	0x9061, 0x04,
-	0x9062, 0xf0,
-	0x9063, 0x22,
-	0xc914, 0x72,
-	0xc915, 0x92,
-	0xc916, 0x80,
-	0xc917, 0x64,
-	0x9064, 0x74,
-	0x9065, 0x01,
-	0x9066, 0x02,
-	0x9067, 0x72,
-	0x9068, 0x95,
-	0xc918, 0x47,
-	0xc919, 0xf2,
-	0xc91a, 0x81,
-	0xc91b, 0x69,
-	0x9169, 0x74,
-	0x916a, 0x02,
-	0x916b, 0xf0,
-	0x916c, 0xec,
-	0x916d, 0xb4,
-	0x916e, 0x10,
-	0x916f, 0x0a,
-	0x9170, 0x90,
-	0x9171, 0x80,
-	0x9172, 0x16,
-	0x9173, 0xe0,
-	0x9174, 0x70,
-	0x9175, 0x04,
-	0x9176, 0x90,
-	0x9177, 0xd3,
-	0x9178, 0xc4,
-	0x9179, 0xf0,
-	0x917a, 0x22,
-	0xc91c, 0x0a,
-	0xc91d, 0xbe,
-	0xc91e, 0x80,
-	0xc91f, 0x73,
-	0x9073, 0xfc,
-	0x9074, 0xa3,
-	0x9075, 0xe0,
-	0x9076, 0xf5,
-	0x9077, 0x82,
-	0x9078, 0x8c,
-	0x9079, 0x83,
-	0x907a, 0xa3,
-	0x907b, 0xa3,
-	0x907c, 0xe0,
-	0x907d, 0xfc,
-	0x907e, 0xa3,
-	0x907f, 0xe0,
-	0x9080, 0xc3,
-	0x9081, 0x9f,
-	0x9082, 0xff,
-	0x9083, 0xec,
-	0x9084, 0x9e,
-	0x9085, 0xfe,
-	0x9086, 0x02,
-	0x9087, 0x0a,
-	0x9088, 0xea,
-	0xc920, 0x47,
-	0xc921, 0x38,
-	0xc922, 0x80,
-	0xc923, 0x89,
-	0x9089, 0xec,
-	0x908a, 0xd3,
-	0x908b, 0x94,
-	0x908c, 0x20,
-	0x908d, 0x40,
-	0x908e, 0x01,
-	0x908f, 0x1c,
-	0x9090, 0x90,
-	0x9091, 0xd3,
-	0x9092, 0xd4,
-	0x9093, 0xec,
-	0x9094, 0xf0,
-	0x9095, 0x02,
-	0x9096, 0x47,
-	0x9097, 0x3d,
-	0xc924, 0x45,
-	0xc925, 0xca,
-	0xc926, 0x80,
-	0xc927, 0x98,
-	0x9098, 0x12,
-	0x9099, 0x77,
-	0x909a, 0xd6,
-	0x909b, 0x02,
-	0x909c, 0x45,
-	0x909d, 0xcd,
-	0xc928, 0x20,
-	0xc929, 0xd5,
-	0xc92a, 0x80,
-	0xc92b, 0x9e,
-	0x909e, 0x90,
-	0x909f, 0x82,
-	0x90a0, 0x18,
-	0x90a1, 0xe0,
-	0x90a2, 0xb4,
-	0x90a3, 0x03,
-	0x90a4, 0x0e,
-	0x90a5, 0x90,
-	0x90a6, 0x83,
-	0x90a7, 0xbf,
-	0x90a8, 0xe0,
-	0x90a9, 0x60,
-	0x90aa, 0x08,
-	0x90ab, 0x90,
-	0x90ac, 0x81,
-	0x90ad, 0xfc,
-	0x90ae, 0xe0,
-	0x90af, 0xff,
-	0x90b0, 0xc3,
-	0x90b1, 0x13,
-	0x90b2, 0xf0,
-	0x90b3, 0x90,
-	0x90b4, 0x81,
-	0x90b5, 0xfc,
-	0x90b6, 0xe0,
-	0x90b7, 0xff,
-	0x90b8, 0x02,
-	0x90b9, 0x20,
-	0x90ba, 0xda,
-	0xc92c, 0x70,
-	0xc92d, 0xbc,
-	0xc92e, 0x80,
-	0xc92f, 0xbb,
-	0x90bb, 0x90,
-	0x90bc, 0x82,
-	0x90bd, 0x18,
-	0x90be, 0xe0,
-	0x90bf, 0xb4,
-	0x90c0, 0x03,
-	0x90c1, 0x06,
-	0x90c2, 0x90,
-	0x90c3, 0xc1,
-	0x90c4, 0x06,
-	0x90c5, 0x74,
-	0x90c6, 0x05,
-	0x90c7, 0xf0,
-	0x90c8, 0x90,
-	0x90c9, 0xd3,
-	0x90ca, 0xa0,
-	0x90cb, 0x02,
-	0x90cc, 0x70,
-	0x90cd, 0xbf,
-	0xc930, 0x72,
-	0xc931, 0x21,
-	0xc932, 0x81,
-	0xc933, 0x3b,
-	0x913b, 0x7d,
-	0x913c, 0x02,
-	0x913d, 0x7f,
-	0x913e, 0x7b,
-	0x913f, 0x02,
-	0x9140, 0x72,
-	0x9141, 0x25,
-	0xc934, 0x28,
-	0xc935, 0xae,
-	0xc936, 0x80,
-	0xc937, 0xd2,
-	0x90d2, 0xf0,
-	0x90d3, 0x90,
-	0x90d4, 0xd2,
-	0x90d5, 0x0a,
-	0x90d6, 0x02,
-	0x90d7, 0x28,
-	0x90d8, 0xb4,
-	0xc938, 0x28,
-	0xc939, 0xb1,
-	0xc93a, 0x80,
-	0xc93b, 0xd9,
-	0x90d9, 0x90,
-	0x90da, 0x83,
-	0x90db, 0xba,
-	0x90dc, 0xe0,
-	0x90dd, 0xff,
-	0x90de, 0x90,
-	0x90df, 0xd2,
-	0x90e0, 0x08,
-	0x90e1, 0xe0,
-	0x90e2, 0xe4,
-	0x90e3, 0xef,
-	0x90e4, 0xf0,
-	0x90e5, 0xa3,
-	0x90e6, 0xe0,
-	0x90e7, 0x74,
-	0x90e8, 0xff,
-	0x90e9, 0xf0,
-	0x90ea, 0x90,
-	0x90eb, 0xd2,
-	0x90ec, 0x0a,
-	0x90ed, 0x02,
-	0x90ee, 0x28,
-	0x90ef, 0xb4,
-	0xc93c, 0x29,
-	0xc93d, 0x79,
-	0xc93e, 0x80,
-	0xc93f, 0xf0,
-	0x90f0, 0xf0,
-	0x90f1, 0x90,
-	0x90f2, 0xd2,
-	0x90f3, 0x0e,
-	0x90f4, 0x02,
-	0x90f5, 0x29,
-	0x90f6, 0x7f,
-	0xc940, 0x29,
-	0xc941, 0x7c,
-	0xc942, 0x80,
-	0xc943, 0xf7,
-	0x90f7, 0x90,
-	0x90f8, 0x83,
-	0x90f9, 0xba,
-	0x90fa, 0xe0,
-	0x90fb, 0xff,
-	0x90fc, 0x90,
-	0x90fd, 0xd2,
-	0x90fe, 0x0c,
-	0x90ff, 0xe0,
-	0x9100, 0xe4,
-	0x9101, 0xef,
-	0x9102, 0xf0,
-	0x9103, 0xa3,
-	0x9104, 0xe0,
-	0x9105, 0x74,
-	0x9106, 0xff,
-	0x9107, 0xf0,
-	0x9108, 0x90,
-	0x9109, 0xd2,
-	0x910a, 0x0e,
-	0x910b, 0x02,
-	0x910c, 0x29,
-	0x910d, 0x7f,
-	0xc944, 0x2a,
-	0xc945, 0x42,
-	0xc946, 0x81,
-	0xc947, 0x0e,
-	0x910e, 0xf0,
-	0x910f, 0x90,
-	0x9110, 0xd2,
-	0x9111, 0x12,
-	0x9112, 0x02,
-	0x9113, 0x2a,
-	0x9114, 0x48,
-	0xc948, 0x2a,
-	0xc949, 0x45,
-	0xc94a, 0x81,
-	0xc94b, 0x15,
-	0x9115, 0x90,
-	0x9116, 0x83,
-	0x9117, 0xba,
-	0x9118, 0xe0,
-	0x9119, 0xff,
-	0x911a, 0x90,
-	0x911b, 0xd2,
-	0x911c, 0x10,
-	0x911d, 0xe0,
-	0x911e, 0xe4,
-	0x911f, 0xef,
-	0x9120, 0xf0,
-	0x9121, 0xa3,
-	0x9122, 0xe0,
-	0x9123, 0x74,
-	0x9124, 0xff,
-	0x9125, 0xf0,
-	0x9126, 0x90,
-	0x9127, 0xd2,
-	0x9128, 0x12,
-	0x9129, 0x02,
-	0x912a, 0x2a,
-	0x912b, 0x48,
-	0xc900, 0x01,
-	0x0000, 0x00,
-};
-
-static const u16 vs6624_p2[] = {
-	0x806f, 0x01,
-	0x058c, 0x01,
-	0x0000, 0x00,
-};
-
-static const u16 vs6624_run_setup[] = {
-	0x1d18, 0x00,				/* Enableconstrainedwhitebalance */
-	VS6624_PEAK_MIN_OUT_G_MSB, 0x3c,	/* Damper PeakGain Output MSB */
-	VS6624_PEAK_MIN_OUT_G_LSB, 0x66,	/* Damper PeakGain Output LSB */
-	VS6624_CM_LOW_THR_MSB, 0x65,		/* Damper Low MSB */
-	VS6624_CM_LOW_THR_LSB, 0xd1,		/* Damper Low LSB */
-	VS6624_CM_HIGH_THR_MSB, 0x66,		/* Damper High MSB */
-	VS6624_CM_HIGH_THR_LSB, 0x62,		/* Damper High LSB */
-	VS6624_CM_MIN_OUT_MSB, 0x00,		/* Damper Min output MSB */
-	VS6624_CM_MIN_OUT_LSB, 0x00,		/* Damper Min output LSB */
-	VS6624_NORA_DISABLE, 0x00,		/* Nora fDisable */
-	VS6624_NORA_USAGE, 0x04,		/* Nora usage */
-	VS6624_NORA_LOW_THR_MSB, 0x63,		/* Damper Low MSB Changed 0x63 to 0x65 */
-	VS6624_NORA_LOW_THR_LSB, 0xd1,		/* Damper Low LSB */
-	VS6624_NORA_HIGH_THR_MSB, 0x68,		/* Damper High MSB */
-	VS6624_NORA_HIGH_THR_LSB, 0xdd,		/* Damper High LSB */
-	VS6624_NORA_MIN_OUT_MSB, 0x3a,		/* Damper Min output MSB */
-	VS6624_NORA_MIN_OUT_LSB, 0x00,		/* Damper Min output LSB */
-	VS6624_F2B_DISABLE, 0x00,		/* Disable */
-	0x1d8a, 0x30,				/* MAXWeightHigh */
-	0x1d91, 0x62,				/* fpDamperLowThresholdHigh MSB */
-	0x1d92, 0x4a,				/* fpDamperLowThresholdHigh LSB */
-	0x1d95, 0x65,				/* fpDamperHighThresholdHigh MSB */
-	0x1d96, 0x0e,				/* fpDamperHighThresholdHigh LSB */
-	0x1da1, 0x3a,				/* fpMinimumDamperOutputLow MSB */
-	0x1da2, 0xb8,				/* fpMinimumDamperOutputLow LSB */
-	0x1e08, 0x06,				/* MAXWeightLow */
-	0x1e0a, 0x0a,				/* MAXWeightHigh */
-	0x1601, 0x3a,				/* Red A MSB */
-	0x1602, 0x14,				/* Red A LSB */
-	0x1605, 0x3b,				/* Blue A MSB */
-	0x1606, 0x85,				/* BLue A LSB */
-	0x1609, 0x3b,				/* RED B MSB */
-	0x160a, 0x85,				/* RED B LSB */
-	0x160d, 0x3a,				/* Blue B MSB */
-	0x160e, 0x14,				/* Blue B LSB */
-	0x1611, 0x30,				/* Max Distance from Locus MSB */
-	0x1612, 0x8f,				/* Max Distance from Locus MSB */
-	0x1614, 0x01,				/* Enable constrainer */
-	0x0000, 0x00,
-};
-
-static const u16 vs6624_default[] = {
-	VS6624_CONTRAST0, 0x84,
-	VS6624_SATURATION0, 0x75,
-	VS6624_GAMMA0, 0x11,
-	VS6624_CONTRAST1, 0x84,
-	VS6624_SATURATION1, 0x75,
-	VS6624_GAMMA1, 0x11,
-	VS6624_MAN_RG, 0x80,
-	VS6624_MAN_GG, 0x80,
-	VS6624_MAN_BG, 0x80,
-	VS6624_WB_MODE, 0x1,
-	VS6624_EXPO_COMPENSATION, 0xfe,
-	VS6624_EXPO_METER, 0x0,
-	VS6624_LIGHT_FREQ, 0x64,
-	VS6624_PEAK_GAIN, 0xe,
-	VS6624_PEAK_LOW_THR, 0x28,
-	VS6624_HMIRROR0, 0x0,
-	VS6624_VFLIP0, 0x0,
-	VS6624_ZOOM_HSTEP0_MSB, 0x0,
-	VS6624_ZOOM_HSTEP0_LSB, 0x1,
-	VS6624_ZOOM_VSTEP0_MSB, 0x0,
-	VS6624_ZOOM_VSTEP0_LSB, 0x1,
-	VS6624_PAN_HSTEP0_MSB, 0x0,
-	VS6624_PAN_HSTEP0_LSB, 0xf,
-	VS6624_PAN_VSTEP0_MSB, 0x0,
-	VS6624_PAN_VSTEP0_LSB, 0xf,
-	VS6624_SENSOR_MODE, 0x1,
-	VS6624_SYNC_CODE_SETUP, 0x21,
-	VS6624_DISABLE_FR_DAMPER, 0x0,
-	VS6624_FR_DEN, 0x1,
-	VS6624_FR_NUM_LSB, 0xf,
-	VS6624_INIT_PIPE_SETUP, 0x0,
-	VS6624_IMG_FMT0, 0x0,
-	VS6624_YUV_SETUP, 0x1,
-	VS6624_IMAGE_SIZE0, 0x2,
-	0x0000, 0x00,
-};
-
-static inline struct vs6624 *to_vs6624(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct vs6624, sd);
-}
-static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
-{
-	return &container_of(ctrl->handler, struct vs6624, hdl)->sd;
-}
-
-static int vs6624_read(struct v4l2_subdev *sd, u16 index)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u8 buf[2];
-
-	buf[0] = index >> 8;
-	buf[1] = index;
-	i2c_master_send(client, buf, 2);
-	i2c_master_recv(client, buf, 1);
-
-	return buf[0];
-}
-
-static int vs6624_write(struct v4l2_subdev *sd, u16 index,
-				u8 value)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	u8 buf[3];
-
-	buf[0] = index >> 8;
-	buf[1] = index;
-	buf[2] = value;
-
-	return i2c_master_send(client, buf, 3);
-}
-
-static int vs6624_writeregs(struct v4l2_subdev *sd, const u16 *regs)
-{
-	u16 reg;
-	u8 data;
-
-	while (*regs != 0x00) {
-		reg = *regs++;
-		data = *regs++;
-
-		vs6624_write(sd, reg, data);
-	}
-	return 0;
-}
-
-static int vs6624_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-
-	switch (ctrl->id) {
-	case V4L2_CID_CONTRAST:
-		vs6624_write(sd, VS6624_CONTRAST0, ctrl->val);
-		break;
-	case V4L2_CID_SATURATION:
-		vs6624_write(sd, VS6624_SATURATION0, ctrl->val);
-		break;
-	case V4L2_CID_HFLIP:
-		vs6624_write(sd, VS6624_HMIRROR0, ctrl->val);
-		break;
-	case V4L2_CID_VFLIP:
-		vs6624_write(sd, VS6624_VFLIP0, ctrl->val);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int vs6624_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
-				enum v4l2_mbus_pixelcode *code)
-{
-	if (index >= ARRAY_SIZE(vs6624_formats))
-		return -EINVAL;
-
-	*code = vs6624_formats[index].mbus_code;
-	return 0;
-}
-
-static int vs6624_try_mbus_fmt(struct v4l2_subdev *sd,
-				struct v4l2_mbus_framefmt *fmt)
-{
-	int index;
-
-	for (index = 0; index < ARRAY_SIZE(vs6624_formats); index++)
-		if (vs6624_formats[index].mbus_code == fmt->code)
-			break;
-	if (index >= ARRAY_SIZE(vs6624_formats)) {
-		/* default to first format */
-		index = 0;
-		fmt->code = vs6624_formats[0].mbus_code;
-	}
-
-	/* sensor mode is VGA */
-	if (fmt->width > VGA_WIDTH)
-		fmt->width = VGA_WIDTH;
-	if (fmt->height > VGA_HEIGHT)
-		fmt->height = VGA_HEIGHT;
-	fmt->width = fmt->width & (~3);
-	fmt->height = fmt->height & (~3);
-	fmt->field = V4L2_FIELD_NONE;
-	fmt->colorspace = vs6624_formats[index].colorspace;
-	return 0;
-}
-
-static int vs6624_s_mbus_fmt(struct v4l2_subdev *sd,
-				struct v4l2_mbus_framefmt *fmt)
-{
-	struct vs6624 *sensor = to_vs6624(sd);
-	int ret;
-
-	ret = vs6624_try_mbus_fmt(sd, fmt);
-	if (ret)
-		return ret;
-
-	/* set image format */
-	switch (fmt->code) {
-	case V4L2_MBUS_FMT_UYVY8_2X8:
-		vs6624_write(sd, VS6624_IMG_FMT0, 0x0);
-		vs6624_write(sd, VS6624_YUV_SETUP, 0x1);
-		break;
-	case V4L2_MBUS_FMT_YUYV8_2X8:
-		vs6624_write(sd, VS6624_IMG_FMT0, 0x0);
-		vs6624_write(sd, VS6624_YUV_SETUP, 0x3);
-		break;
-	case V4L2_MBUS_FMT_RGB565_2X8_LE:
-		vs6624_write(sd, VS6624_IMG_FMT0, 0x4);
-		vs6624_write(sd, VS6624_RGB_SETUP, 0x0);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/* set image size */
-	if ((fmt->width == VGA_WIDTH) && (fmt->height == VGA_HEIGHT))
-		vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x2);
-	else if ((fmt->width == QVGA_WIDTH) && (fmt->height == QVGA_HEIGHT))
-		vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x4);
-	else if ((fmt->width == QQVGA_WIDTH) && (fmt->height == QQVGA_HEIGHT))
-		vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x6);
-	else if ((fmt->width == CIF_WIDTH) && (fmt->height == CIF_HEIGHT))
-		vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x3);
-	else if ((fmt->width == QCIF_WIDTH) && (fmt->height == QCIF_HEIGHT))
-		vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x5);
-	else if ((fmt->width == QQCIF_WIDTH) && (fmt->height == QQCIF_HEIGHT))
-		vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x7);
-	else {
-		vs6624_write(sd, VS6624_IMAGE_SIZE0, 0x8);
-		vs6624_write(sd, VS6624_MAN_HSIZE0_MSB, fmt->width >> 8);
-		vs6624_write(sd, VS6624_MAN_HSIZE0_LSB, fmt->width & 0xFF);
-		vs6624_write(sd, VS6624_MAN_VSIZE0_MSB, fmt->height >> 8);
-		vs6624_write(sd, VS6624_MAN_VSIZE0_LSB, fmt->height & 0xFF);
-		vs6624_write(sd, VS6624_CROP_CTRL0, 0x1);
-	}
-
-	sensor->fmt = *fmt;
-
-	return 0;
-}
-
-static int vs6624_g_mbus_fmt(struct v4l2_subdev *sd,
-				struct v4l2_mbus_framefmt *fmt)
-{
-	struct vs6624 *sensor = to_vs6624(sd);
-
-	*fmt = sensor->fmt;
-	return 0;
-}
-
-static int vs6624_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
-{
-	struct vs6624 *sensor = to_vs6624(sd);
-	struct v4l2_captureparm *cp = &parms->parm.capture;
-
-	if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-
-	memset(cp, 0, sizeof(*cp));
-	cp->capability = V4L2_CAP_TIMEPERFRAME;
-	cp->timeperframe.numerator = sensor->frame_rate.denominator;
-	cp->timeperframe.denominator = sensor->frame_rate.numerator;
-	return 0;
-}
-
-static int vs6624_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
-{
-	struct vs6624 *sensor = to_vs6624(sd);
-	struct v4l2_captureparm *cp = &parms->parm.capture;
-	struct v4l2_fract *tpf = &cp->timeperframe;
-
-	if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	if (cp->extendedmode != 0)
-		return -EINVAL;
-
-	if (tpf->numerator == 0 || tpf->denominator == 0
-		|| (tpf->denominator > tpf->numerator * MAX_FRAME_RATE)) {
-		/* reset to max frame rate */
-		tpf->numerator = 1;
-		tpf->denominator = MAX_FRAME_RATE;
-	}
-	sensor->frame_rate.numerator = tpf->denominator;
-	sensor->frame_rate.denominator = tpf->numerator;
-	vs6624_write(sd, VS6624_DISABLE_FR_DAMPER, 0x0);
-	vs6624_write(sd, VS6624_FR_NUM_MSB,
-			sensor->frame_rate.numerator >> 8);
-	vs6624_write(sd, VS6624_FR_NUM_LSB,
-			sensor->frame_rate.numerator & 0xFF);
-	vs6624_write(sd, VS6624_FR_DEN,
-			sensor->frame_rate.denominator & 0xFF);
-	return 0;
-}
-
-static int vs6624_s_stream(struct v4l2_subdev *sd, int enable)
-{
-	if (enable)
-		vs6624_write(sd, VS6624_USER_CMD, 0x2);
-	else
-		vs6624_write(sd, VS6624_USER_CMD, 0x4);
-	udelay(100);
-	return 0;
-}
-
-static int vs6624_g_chip_ident(struct v4l2_subdev *sd,
-		struct v4l2_dbg_chip_ident *chip)
-{
-	int rev;
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	rev = (vs6624_read(sd, VS6624_FW_VSN_MAJOR) << 8)
-		| vs6624_read(sd, VS6624_FW_VSN_MINOR);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_VS6624, rev);
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int vs6624_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	reg->val = vs6624_read(sd, reg->reg & 0xffff);
-	reg->size = 1;
-	return 0;
-}
-
-static int vs6624_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (!v4l2_chip_match_i2c_client(client, &reg->match))
-		return -EINVAL;
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	vs6624_write(sd, reg->reg & 0xffff, reg->val & 0xff);
-	return 0;
-}
-#endif
-
-static const struct v4l2_ctrl_ops vs6624_ctrl_ops = {
-	.s_ctrl = vs6624_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops vs6624_core_ops = {
-	.g_chip_ident = vs6624_g_chip_ident,
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.g_register = vs6624_g_register,
-	.s_register = vs6624_s_register,
-#endif
-};
-
-static const struct v4l2_subdev_video_ops vs6624_video_ops = {
-	.enum_mbus_fmt = vs6624_enum_mbus_fmt,
-	.try_mbus_fmt = vs6624_try_mbus_fmt,
-	.s_mbus_fmt = vs6624_s_mbus_fmt,
-	.g_mbus_fmt = vs6624_g_mbus_fmt,
-	.s_parm = vs6624_s_parm,
-	.g_parm = vs6624_g_parm,
-	.s_stream = vs6624_s_stream,
-};
-
-static const struct v4l2_subdev_ops vs6624_ops = {
-	.core = &vs6624_core_ops,
-	.video = &vs6624_video_ops,
-};
-
-static int __devinit vs6624_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	struct vs6624 *sensor;
-	struct v4l2_subdev *sd;
-	struct v4l2_ctrl_handler *hdl;
-	const unsigned *ce;
-	int ret;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
-		return -EIO;
-
-	ce = client->dev.platform_data;
-	if (ce == NULL)
-		return -EINVAL;
-
-	ret = gpio_request(*ce, "VS6624 Chip Enable");
-	if (ret) {
-		v4l_err(client, "failed to request GPIO %d\n", *ce);
-		return ret;
-	}
-	gpio_direction_output(*ce, 1);
-	/* wait 100ms before any further i2c writes are performed */
-	mdelay(100);
-
-	sensor = kzalloc(sizeof(*sensor), GFP_KERNEL);
-	if (sensor == NULL) {
-		gpio_free(*ce);
-		return -ENOMEM;
-	}
-
-	sd = &sensor->sd;
-	v4l2_i2c_subdev_init(sd, client, &vs6624_ops);
-
-	vs6624_writeregs(sd, vs6624_p1);
-	vs6624_write(sd, VS6624_MICRO_EN, 0x2);
-	vs6624_write(sd, VS6624_DIO_EN, 0x1);
-	mdelay(10);
-	vs6624_writeregs(sd, vs6624_p2);
-
-	vs6624_writeregs(sd, vs6624_default);
-	vs6624_write(sd, VS6624_HSYNC_SETUP, 0xF);
-	vs6624_writeregs(sd, vs6624_run_setup);
-
-	/* set frame rate */
-	sensor->frame_rate.numerator = MAX_FRAME_RATE;
-	sensor->frame_rate.denominator = 1;
-	vs6624_write(sd, VS6624_DISABLE_FR_DAMPER, 0x0);
-	vs6624_write(sd, VS6624_FR_NUM_MSB,
-			sensor->frame_rate.numerator >> 8);
-	vs6624_write(sd, VS6624_FR_NUM_LSB,
-			sensor->frame_rate.numerator & 0xFF);
-	vs6624_write(sd, VS6624_FR_DEN,
-			sensor->frame_rate.denominator & 0xFF);
-
-	sensor->fmt = vs6624_default_fmt;
-	sensor->ce_pin = *ce;
-
-	v4l_info(client, "chip found @ 0x%02x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	hdl = &sensor->hdl;
-	v4l2_ctrl_handler_init(hdl, 4);
-	v4l2_ctrl_new_std(hdl, &vs6624_ctrl_ops,
-			V4L2_CID_CONTRAST, 0, 0xFF, 1, 0x87);
-	v4l2_ctrl_new_std(hdl, &vs6624_ctrl_ops,
-			V4L2_CID_SATURATION, 0, 0xFF, 1, 0x78);
-	v4l2_ctrl_new_std(hdl, &vs6624_ctrl_ops,
-			V4L2_CID_HFLIP, 0, 1, 1, 0);
-	v4l2_ctrl_new_std(hdl, &vs6624_ctrl_ops,
-			V4L2_CID_VFLIP, 0, 1, 1, 0);
-	/* hook the control handler into the driver */
-	sd->ctrl_handler = hdl;
-	if (hdl->error) {
-		int err = hdl->error;
-
-		v4l2_ctrl_handler_free(hdl);
-		kfree(sensor);
-		gpio_free(*ce);
-		return err;
-	}
-
-	/* initialize the hardware to the default control values */
-	ret = v4l2_ctrl_handler_setup(hdl);
-	if (ret) {
-		v4l2_ctrl_handler_free(hdl);
-		kfree(sensor);
-		gpio_free(*ce);
-	}
-	return ret;
-}
-
-static int __devexit vs6624_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct vs6624 *sensor = to_vs6624(sd);
-
-	v4l2_device_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(sd->ctrl_handler);
-	gpio_free(sensor->ce_pin);
-	kfree(sensor);
-	return 0;
-}
-
-static const struct i2c_device_id vs6624_id[] = {
-	{"vs6624", 0},
-	{},
-};
-
-MODULE_DEVICE_TABLE(i2c, vs6624_id);
-
-static struct i2c_driver vs6624_driver = {
-	.driver = {
-		.owner  = THIS_MODULE,
-		.name   = "vs6624",
-	},
-	.probe          = vs6624_probe,
-	.remove         = __devexit_p(vs6624_remove),
-	.id_table       = vs6624_id,
-};
-
-static __init int vs6624_init(void)
-{
-	return i2c_add_driver(&vs6624_driver);
-}
-
-static __exit void vs6624_exit(void)
-{
-	i2c_del_driver(&vs6624_driver);
-}
-
-module_init(vs6624_init);
-module_exit(vs6624_exit);
-
-MODULE_DESCRIPTION("VS6624 sensor driver");
-MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@gmail.com>");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/video/vs6624_regs.h b/drivers/media/video/vs6624_regs.h
deleted file mode 100644
index 6ba2ee2..0000000
--- a/drivers/media/video/vs6624_regs.h
+++ /dev/null
@@ -1,337 +0,0 @@
-/*
- * vs6624 - ST VS6624 CMOS image sensor registers
- *
- * Copyright (c) 2011 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _VS6624_REGS_H_
-#define _VS6624_REGS_H_
-
-/* low level control registers */
-#define VS6624_MICRO_EN               0xC003 /* power enable for all MCU clock */
-#define VS6624_DIO_EN                 0xC044 /* enable digital I/O */
-/* device parameters */
-#define VS6624_DEV_ID_MSB             0x0001 /* device id MSB */
-#define VS6624_DEV_ID_LSB             0x0002 /* device id LSB */
-#define VS6624_FW_VSN_MAJOR           0x0004 /* firmware version major */
-#define VS6624_FW_VSN_MINOR           0x0006 /* firmware version minor */
-#define VS6624_PATCH_VSN_MAJOR        0x0008 /* patch version major */
-#define VS6624_PATCH_VSN_MINOR        0x000A /* patch version minor */
-/* host interface manager control */
-#define VS6624_USER_CMD               0x0180 /* user level control of operating states */
-/* host interface manager status */
-#define VS6624_STATE                  0x0202 /* current state of the mode manager */
-/* run mode control */
-#define VS6624_METER_ON               0x0280 /* if false AE and AWB are disabled */
-/* mode setup */
-#define VS6624_ACTIVE_PIPE_SETUP      0x0302 /* select the active bank for non view live mode */
-#define VS6624_SENSOR_MODE            0x0308 /* select the different sensor mode */
-/* pipe setup bank0 */
-#define VS6624_IMAGE_SIZE0            0x0380 /* required output dimension */
-#define VS6624_MAN_HSIZE0_MSB         0x0383 /* input required manual H size MSB */
-#define VS6624_MAN_HSIZE0_LSB         0x0384 /* input required manual H size LSB */
-#define VS6624_MAN_VSIZE0_MSB         0x0387 /* input required manual V size MSB */
-#define VS6624_MAN_VSIZE0_LSB         0x0388 /* input required manual V size LSB */
-#define VS6624_ZOOM_HSTEP0_MSB        0x038B /* set the zoom H step MSB */
-#define VS6624_ZOOM_HSTEP0_LSB        0x038C /* set the zoom H step LSB */
-#define VS6624_ZOOM_VSTEP0_MSB        0x038F /* set the zoom V step MSB */
-#define VS6624_ZOOM_VSTEP0_LSB        0x0390 /* set the zoom V step LSB */
-#define VS6624_ZOOM_CTRL0             0x0392 /* control zoon in, out and stop */
-#define VS6624_PAN_HSTEP0_MSB         0x0395 /* set the pan H step MSB */
-#define VS6624_PAN_HSTEP0_LSB         0x0396 /* set the pan H step LSB */
-#define VS6624_PAN_VSTEP0_MSB         0x0399 /* set the pan V step MSB */
-#define VS6624_PAN_VSTEP0_LSB         0x039A /* set the pan V step LSB */
-#define VS6624_PAN_CTRL0              0x039C /* control pan operation */
-#define VS6624_CROP_CTRL0             0x039E /* select cropping mode */
-#define VS6624_CROP_HSTART0_MSB       0x03A1 /* set the cropping H start address MSB */
-#define VS6624_CROP_HSTART0_LSB       0x03A2 /* set the cropping H start address LSB */
-#define VS6624_CROP_HSIZE0_MSB        0x03A5 /* set the cropping H size MSB */
-#define VS6624_CROP_HSIZE0_LSB        0x03A6 /* set the cropping H size LSB */
-#define VS6624_CROP_VSTART0_MSB       0x03A9 /* set the cropping V start address MSB */
-#define VS6624_CROP_VSTART0_LSB       0x03AA /* set the cropping V start address LSB */
-#define VS6624_CROP_VSIZE0_MSB        0x03AD /* set the cropping V size MSB */
-#define VS6624_CROP_VSIZE0_LSB        0x03AE /* set the cropping V size LSB */
-#define VS6624_IMG_FMT0               0x03B0 /* select required output image format */
-#define VS6624_BAYER_OUT_ALIGN0       0x03B2 /* set bayer output alignment */
-#define VS6624_CONTRAST0              0x03B4 /* contrast control for output */
-#define VS6624_SATURATION0            0x03B6 /* saturation control for output */
-#define VS6624_GAMMA0                 0x03B8 /* gamma settings */
-#define VS6624_HMIRROR0               0x03BA /* horizontal image orientation flip */
-#define VS6624_VFLIP0                 0x03BC /* vertical image orientation flip */
-#define VS6624_CHANNEL_ID0            0x03BE /* logical DMA channel number */
-/* pipe setup bank1 */
-#define VS6624_IMAGE_SIZE1            0x0400 /* required output dimension */
-#define VS6624_MAN_HSIZE1_MSB         0x0403 /* input required manual H size MSB */
-#define VS6624_MAN_HSIZE1_LSB         0x0404 /* input required manual H size LSB */
-#define VS6624_MAN_VSIZE1_MSB         0x0407 /* input required manual V size MSB */
-#define VS6624_MAN_VSIZE1_LSB         0x0408 /* input required manual V size LSB */
-#define VS6624_ZOOM_HSTEP1_MSB        0x040B /* set the zoom H step MSB */
-#define VS6624_ZOOM_HSTEP1_LSB        0x040C /* set the zoom H step LSB */
-#define VS6624_ZOOM_VSTEP1_MSB        0x040F /* set the zoom V step MSB */
-#define VS6624_ZOOM_VSTEP1_LSB        0x0410 /* set the zoom V step LSB */
-#define VS6624_ZOOM_CTRL1             0x0412 /* control zoon in, out and stop */
-#define VS6624_PAN_HSTEP1_MSB         0x0415 /* set the pan H step MSB */
-#define VS6624_PAN_HSTEP1_LSB         0x0416 /* set the pan H step LSB */
-#define VS6624_PAN_VSTEP1_MSB         0x0419 /* set the pan V step MSB */
-#define VS6624_PAN_VSTEP1_LSB         0x041A /* set the pan V step LSB */
-#define VS6624_PAN_CTRL1              0x041C /* control pan operation */
-#define VS6624_CROP_CTRL1             0x041E /* select cropping mode */
-#define VS6624_CROP_HSTART1_MSB       0x0421 /* set the cropping H start address MSB */
-#define VS6624_CROP_HSTART1_LSB       0x0422 /* set the cropping H start address LSB */
-#define VS6624_CROP_HSIZE1_MSB        0x0425 /* set the cropping H size MSB */
-#define VS6624_CROP_HSIZE1_LSB        0x0426 /* set the cropping H size LSB */
-#define VS6624_CROP_VSTART1_MSB       0x0429 /* set the cropping V start address MSB */
-#define VS6624_CROP_VSTART1_LSB       0x042A /* set the cropping V start address LSB */
-#define VS6624_CROP_VSIZE1_MSB        0x042D /* set the cropping V size MSB */
-#define VS6624_CROP_VSIZE1_LSB        0x042E /* set the cropping V size LSB */
-#define VS6624_IMG_FMT1               0x0430 /* select required output image format */
-#define VS6624_BAYER_OUT_ALIGN1       0x0432 /* set bayer output alignment */
-#define VS6624_CONTRAST1              0x0434 /* contrast control for output */
-#define VS6624_SATURATION1            0x0436 /* saturation control for output */
-#define VS6624_GAMMA1                 0x0438 /* gamma settings */
-#define VS6624_HMIRROR1               0x043A /* horizontal image orientation flip */
-#define VS6624_VFLIP1                 0x043C /* vertical image orientation flip */
-#define VS6624_CHANNEL_ID1            0x043E /* logical DMA channel number */
-/* view live control */
-#define VS6624_VIEW_LIVE_EN           0x0480 /* enable view live mode */
-#define VS6624_INIT_PIPE_SETUP        0x0482 /* select initial pipe setup bank */
-/* view live status */
-#define VS6624_CUR_PIPE_SETUP         0x0500 /* indicates most recently applied setup bank */
-/* power management */
-#define VS6624_TIME_TO_POWER_DOWN     0x0580 /* automatically transition time to stop mode */
-/* video timing parameter host inputs */
-#define VS6624_EXT_CLK_FREQ_NUM_MSB   0x0605 /* external clock frequency numerator MSB */
-#define VS6624_EXT_CLK_FREQ_NUM_LSB   0x0606 /* external clock frequency numerator LSB */
-#define VS6624_EXT_CLK_FREQ_DEN       0x0608 /* external clock frequency denominator */
-/* video timing control */
-#define VS6624_SYS_CLK_MODE           0x0880 /* decides system clock frequency */
-/* frame dimension parameter host inputs */
-#define VS6624_LIGHT_FREQ             0x0C80 /* AC frequency used for flicker free time */
-#define VS6624_FLICKER_COMPAT         0x0C82 /* flicker compatible frame length */
-/* static frame rate control */
-#define VS6624_FR_NUM_MSB             0x0D81 /* desired frame rate numerator MSB */
-#define VS6624_FR_NUM_LSB             0x0D82 /* desired frame rate numerator LSB */
-#define VS6624_FR_DEN                 0x0D84 /* desired frame rate denominator */
-/* automatic frame rate control */
-#define VS6624_DISABLE_FR_DAMPER      0x0E80 /* defines frame rate mode */
-#define VS6624_MIN_DAMPER_OUT_MSB     0x0E8C /* minimum frame rate MSB */
-#define VS6624_MIN_DAMPER_OUT_LSB     0x0E8A /* minimum frame rate LSB */
-/* exposure controls */
-#define VS6624_EXPO_MODE              0x1180 /* exposure mode */
-#define VS6624_EXPO_METER             0x1182 /* weights to be associated with the zones */
-#define VS6624_EXPO_TIME_NUM          0x1184 /* exposure time numerator */
-#define VS6624_EXPO_TIME_DEN          0x1186 /* exposure time denominator */
-#define VS6624_EXPO_TIME_MSB          0x1189 /* exposure time for the Manual Mode MSB */
-#define VS6624_EXPO_TIME_LSB          0x118A /* exposure time for the Manual Mode LSB */
-#define VS6624_EXPO_COMPENSATION      0x1190 /* exposure compensation */
-#define VS6624_DIRECT_COARSE_MSB      0x1195 /* coarse integration lines for Direct Mode MSB */
-#define VS6624_DIRECT_COARSE_LSB      0x1196 /* coarse integration lines for Direct Mode LSB */
-#define VS6624_DIRECT_FINE_MSB        0x1199 /* fine integration pixels for Direct Mode MSB */
-#define VS6624_DIRECT_FINE_LSB        0x119A /* fine integration pixels for Direct Mode LSB */
-#define VS6624_DIRECT_ANAL_GAIN_MSB   0x119D /* analog gain for Direct Mode MSB */
-#define VS6624_DIRECT_ANAL_GAIN_LSB   0x119E /* analog gain for Direct Mode LSB */
-#define VS6624_DIRECT_DIGI_GAIN_MSB   0x11A1 /* digital gain for Direct Mode MSB */
-#define VS6624_DIRECT_DIGI_GAIN_LSB   0x11A2 /* digital gain for Direct Mode LSB */
-#define VS6624_FLASH_COARSE_MSB       0x11A5 /* coarse integration lines for Flash Gun Mode MSB */
-#define VS6624_FLASH_COARSE_LSB       0x11A6 /* coarse integration lines for Flash Gun Mode LSB */
-#define VS6624_FLASH_FINE_MSB         0x11A9 /* fine integration pixels for Flash Gun Mode MSB */
-#define VS6624_FLASH_FINE_LSB         0x11AA /* fine integration pixels for Flash Gun Mode LSB */
-#define VS6624_FLASH_ANAL_GAIN_MSB    0x11AD /* analog gain for Flash Gun Mode MSB */
-#define VS6624_FLASH_ANAL_GAIN_LSB    0x11AE /* analog gain for Flash Gun Mode LSB */
-#define VS6624_FLASH_DIGI_GAIN_MSB    0x11B1 /* digital gain for Flash Gun Mode MSB */
-#define VS6624_FLASH_DIGI_GAIN_LSB    0x11B2 /* digital gain for Flash Gun Mode LSB */
-#define VS6624_FREEZE_AE              0x11B4 /* freeze auto exposure */
-#define VS6624_MAX_INT_TIME_MSB       0x11B7 /* user maximum integration time MSB */
-#define VS6624_MAX_INT_TIME_LSB       0x11B8 /* user maximum integration time LSB */
-#define VS6624_FLASH_AG_THR_MSB       0x11BB /* recommend flash gun analog gain threshold MSB */
-#define VS6624_FLASH_AG_THR_LSB       0x11BC /* recommend flash gun analog gain threshold LSB */
-#define VS6624_ANTI_FLICKER_MODE      0x11C0 /* anti flicker mode */
-/* white balance control */
-#define VS6624_WB_MODE                0x1480 /* set white balance mode */
-#define VS6624_MAN_RG                 0x1482 /* user setting for red channel gain */
-#define VS6624_MAN_GG                 0x1484 /* user setting for green channel gain */
-#define VS6624_MAN_BG                 0x1486 /* user setting for blue channel gain */
-#define VS6624_FLASH_RG_MSB           0x148B /* red gain for Flash Gun MSB */
-#define VS6624_FLASH_RG_LSB           0x148C /* red gain for Flash Gun LSB */
-#define VS6624_FLASH_GG_MSB           0x148F /* green gain for Flash Gun MSB */
-#define VS6624_FLASH_GG_LSB           0x1490 /* green gain for Flash Gun LSB */
-#define VS6624_FLASH_BG_MSB           0x1493 /* blue gain for Flash Gun MSB */
-#define VS6624_FLASH_BG_LSB           0x1494 /* blue gain for Flash Gun LSB */
-/* sensor setup */
-#define VS6624_BC_OFFSET              0x1990 /* Black Correction Offset */
-/* image stability */
-#define VS6624_STABLE_WB              0x1900 /* white balance stable */
-#define VS6624_STABLE_EXPO            0x1902 /* exposure stable */
-#define VS6624_STABLE                 0x1906 /* system stable */
-/* flash control */
-#define VS6624_FLASH_MODE             0x1A80 /* flash mode */
-#define VS6624_FLASH_OFF_LINE_MSB     0x1A83 /* off line at flash pulse mode MSB */
-#define VS6624_FLASH_OFF_LINE_LSB     0x1A84 /* off line at flash pulse mode LSB */
-/* flash status */
-#define VS6624_FLASH_RECOM            0x1B00 /* flash gun is recommended */
-#define VS6624_FLASH_GRAB_COMPLETE    0x1B02 /* flash gun image has been grabbed */
-/* scythe filter controls */
-#define VS6624_SCYTHE_FILTER          0x1D80 /* disable scythe defect correction */
-/* jack filter controls */
-#define VS6624_JACK_FILTER            0x1E00 /* disable jack defect correction */
-/* demosaic control */
-#define VS6624_ANTI_ALIAS_FILTER      0x1E80 /* anti alias filter suppress */
-/* color matrix dampers */
-#define VS6624_CM_DISABLE             0x1F00 /* disable color matrix damper */
-#define VS6624_CM_LOW_THR_MSB         0x1F03 /* low threshold for exposure MSB */
-#define VS6624_CM_LOW_THR_LSB         0x1F04 /* low threshold for exposure LSB */
-#define VS6624_CM_HIGH_THR_MSB        0x1F07 /* high threshold for exposure MSB */
-#define VS6624_CM_HIGH_THR_LSB        0x1F08 /* high threshold for exposure LSB */
-#define VS6624_CM_MIN_OUT_MSB         0x1F0B /* minimum possible damper output MSB */
-#define VS6624_CM_MIN_OUT_LSB         0x1F0C /* minimum possible damper output LSB */
-/* peaking control */
-#define VS6624_PEAK_GAIN              0x2000 /* controls peaking gain */
-#define VS6624_PEAK_G_DISABLE         0x2002 /* disable peak gain damping */
-#define VS6624_PEAK_LOW_THR_G_MSB     0x2005 /* low threshold for exposure for gain MSB */
-#define VS6624_PEAK_LOW_THR_G_LSB     0x2006 /* low threshold for exposure for gain LSB */
-#define VS6624_PEAK_HIGH_THR_G_MSB    0x2009 /* high threshold for exposure for gain MSB */
-#define VS6624_PEAK_HIGH_THR_G_LSB    0x200A /* high threshold for exposure for gain LSB */
-#define VS6624_PEAK_MIN_OUT_G_MSB     0x200D /* minimum damper output for gain MSB */
-#define VS6624_PEAK_MIN_OUT_G_LSB     0x200E /* minimum damper output for gain LSB */
-#define VS6624_PEAK_LOW_THR           0x2010 /* adjust degree of coring */
-#define VS6624_PEAK_C_DISABLE         0x2012 /* disable coring damping */
-#define VS6624_PEAK_HIGH_THR          0x2014 /* adjust maximum gain */
-#define VS6624_PEAK_LOW_THR_C_MSB     0x2017 /* low threshold for exposure for coring MSB */
-#define VS6624_PEAK_LOW_THR_C_LSB     0x2018 /* low threshold for exposure for coring LSB */
-#define VS6624_PEAK_HIGH_THR_C_MSB    0x201B /* high threshold for exposure for coring MSB */
-#define VS6624_PEAK_HIGH_THR_C_LSB    0x201C /* high threshold for exposure for coring LSB */
-#define VS6624_PEAK_MIN_OUT_C_MSB     0x201F /* minimum damper output for coring MSB */
-#define VS6624_PEAK_MIN_OUT_C_LSB     0x2020 /* minimum damper output for coring LSB */
-/* pipe 0 RGB to YUV matrix manual control */
-#define VS6624_RYM0_MAN_CTRL          0x2180 /* enable manual RGB to YUV matrix */
-#define VS6624_RYM0_W00_MSB           0x2183 /* row 0 column 0 of YUV matrix MSB */
-#define VS6624_RYM0_W00_LSB           0x2184 /* row 0 column 0 of YUV matrix LSB */
-#define VS6624_RYM0_W01_MSB           0x2187 /* row 0 column 1 of YUV matrix MSB */
-#define VS6624_RYM0_W01_LSB           0x2188 /* row 0 column 1 of YUV matrix LSB */
-#define VS6624_RYM0_W02_MSB           0x218C /* row 0 column 2 of YUV matrix MSB */
-#define VS6624_RYM0_W02_LSB           0x218D /* row 0 column 2 of YUV matrix LSB */
-#define VS6624_RYM0_W10_MSB           0x2190 /* row 1 column 0 of YUV matrix MSB */
-#define VS6624_RYM0_W10_LSB           0x218F /* row 1 column 0 of YUV matrix LSB */
-#define VS6624_RYM0_W11_MSB           0x2193 /* row 1 column 1 of YUV matrix MSB */
-#define VS6624_RYM0_W11_LSB           0x2194 /* row 1 column 1 of YUV matrix LSB */
-#define VS6624_RYM0_W12_MSB           0x2197 /* row 1 column 2 of YUV matrix MSB */
-#define VS6624_RYM0_W12_LSB           0x2198 /* row 1 column 2 of YUV matrix LSB */
-#define VS6624_RYM0_W20_MSB           0x219B /* row 2 column 0 of YUV matrix MSB */
-#define VS6624_RYM0_W20_LSB           0x219C /* row 2 column 0 of YUV matrix LSB */
-#define VS6624_RYM0_W21_MSB           0x21A0 /* row 2 column 1 of YUV matrix MSB */
-#define VS6624_RYM0_W21_LSB           0x219F /* row 2 column 1 of YUV matrix LSB */
-#define VS6624_RYM0_W22_MSB           0x21A3 /* row 2 column 2 of YUV matrix MSB */
-#define VS6624_RYM0_W22_LSB           0x21A4 /* row 2 column 2 of YUV matrix LSB */
-#define VS6624_RYM0_YINY_MSB          0x21A7 /* Y in Y MSB */
-#define VS6624_RYM0_YINY_LSB          0x21A8 /* Y in Y LSB */
-#define VS6624_RYM0_YINCB_MSB         0x21AB /* Y in Cb MSB */
-#define VS6624_RYM0_YINCB_LSB         0x21AC /* Y in Cb LSB */
-#define VS6624_RYM0_YINCR_MSB         0x21B0 /* Y in Cr MSB */
-#define VS6624_RYM0_YINCR_LSB         0x21AF /* Y in Cr LSB */
-/* pipe 1 RGB to YUV matrix manual control */
-#define VS6624_RYM1_MAN_CTRL          0x2200 /* enable manual RGB to YUV matrix */
-#define VS6624_RYM1_W00_MSB           0x2203 /* row 0 column 0 of YUV matrix MSB */
-#define VS6624_RYM1_W00_LSB           0x2204 /* row 0 column 0 of YUV matrix LSB */
-#define VS6624_RYM1_W01_MSB           0x2207 /* row 0 column 1 of YUV matrix MSB */
-#define VS6624_RYM1_W01_LSB           0x2208 /* row 0 column 1 of YUV matrix LSB */
-#define VS6624_RYM1_W02_MSB           0x220C /* row 0 column 2 of YUV matrix MSB */
-#define VS6624_RYM1_W02_LSB           0x220D /* row 0 column 2 of YUV matrix LSB */
-#define VS6624_RYM1_W10_MSB           0x2210 /* row 1 column 0 of YUV matrix MSB */
-#define VS6624_RYM1_W10_LSB           0x220F /* row 1 column 0 of YUV matrix LSB */
-#define VS6624_RYM1_W11_MSB           0x2213 /* row 1 column 1 of YUV matrix MSB */
-#define VS6624_RYM1_W11_LSB           0x2214 /* row 1 column 1 of YUV matrix LSB */
-#define VS6624_RYM1_W12_MSB           0x2217 /* row 1 column 2 of YUV matrix MSB */
-#define VS6624_RYM1_W12_LSB           0x2218 /* row 1 column 2 of YUV matrix LSB */
-#define VS6624_RYM1_W20_MSB           0x221B /* row 2 column 0 of YUV matrix MSB */
-#define VS6624_RYM1_W20_LSB           0x221C /* row 2 column 0 of YUV matrix LSB */
-#define VS6624_RYM1_W21_MSB           0x2220 /* row 2 column 1 of YUV matrix MSB */
-#define VS6624_RYM1_W21_LSB           0x221F /* row 2 column 1 of YUV matrix LSB */
-#define VS6624_RYM1_W22_MSB           0x2223 /* row 2 column 2 of YUV matrix MSB */
-#define VS6624_RYM1_W22_LSB           0x2224 /* row 2 column 2 of YUV matrix LSB */
-#define VS6624_RYM1_YINY_MSB          0x2227 /* Y in Y MSB */
-#define VS6624_RYM1_YINY_LSB          0x2228 /* Y in Y LSB */
-#define VS6624_RYM1_YINCB_MSB         0x222B /* Y in Cb MSB */
-#define VS6624_RYM1_YINCB_LSB         0x222C /* Y in Cb LSB */
-#define VS6624_RYM1_YINCR_MSB         0x2220 /* Y in Cr MSB */
-#define VS6624_RYM1_YINCR_LSB         0x222F /* Y in Cr LSB */
-/* pipe 0 gamma manual control */
-#define VS6624_GAMMA_MAN_CTRL0        0x2280 /* enable manual gamma setup */
-#define VS6624_GAMMA_PEAK_R0          0x2282 /* peaked red channel gamma value */
-#define VS6624_GAMMA_PEAK_G0          0x2284 /* peaked green channel gamma value */
-#define VS6624_GAMMA_PEAK_B0          0x2286 /* peaked blue channel gamma value */
-#define VS6624_GAMMA_UNPEAK_R0        0x2288 /* unpeaked red channel gamma value */
-#define VS6624_GAMMA_UNPEAK_G0        0x228A /* unpeaked green channel gamma value */
-#define VS6624_GAMMA_UNPEAK_B0        0x228C /* unpeaked blue channel gamma value */
-/* pipe 1 gamma manual control */
-#define VS6624_GAMMA_MAN_CTRL1        0x2300 /* enable manual gamma setup */
-#define VS6624_GAMMA_PEAK_R1          0x2302 /* peaked red channel gamma value */
-#define VS6624_GAMMA_PEAK_G1          0x2304 /* peaked green channel gamma value */
-#define VS6624_GAMMA_PEAK_B1          0x2306 /* peaked blue channel gamma value */
-#define VS6624_GAMMA_UNPEAK_R1        0x2308 /* unpeaked red channel gamma value */
-#define VS6624_GAMMA_UNPEAK_G1        0x230A /* unpeaked green channel gamma value */
-#define VS6624_GAMMA_UNPEAK_B1        0x230C /* unpeaked blue channel gamma value */
-/* fade to black */
-#define VS6624_F2B_DISABLE            0x2480 /* disable fade to black */
-#define VS6624_F2B_BLACK_VAL_MSB      0x2483 /* black value MSB */
-#define VS6624_F2B_BLACK_VAL_LSB      0x2484 /* black value LSB */
-#define VS6624_F2B_LOW_THR_MSB        0x2487 /* low threshold for exposure MSB */
-#define VS6624_F2B_LOW_THR_LSB        0x2488 /* low threshold for exposure LSB */
-#define VS6624_F2B_HIGH_THR_MSB       0x248B /* high threshold for exposure MSB */
-#define VS6624_F2B_HIGH_THR_LSB       0x248C /* high threshold for exposure LSB */
-#define VS6624_F2B_MIN_OUT_MSB        0x248F /* minimum damper output MSB */
-#define VS6624_F2B_MIN_OUT_LSB        0x2490 /* minimum damper output LSB */
-/* output formatter control */
-#define VS6624_CODE_CK_EN             0x2580 /* code check enable */
-#define VS6624_BLANK_FMT              0x2582 /* blank format */
-#define VS6624_SYNC_CODE_SETUP        0x2584 /* sync code setup */
-#define VS6624_HSYNC_SETUP            0x2586 /* H sync setup */
-#define VS6624_VSYNC_SETUP            0x2588 /* V sync setup */
-#define VS6624_PCLK_SETUP             0x258A /* PCLK setup */
-#define VS6624_PCLK_EN                0x258C /* PCLK enable */
-#define VS6624_OPF_SP_SETUP           0x258E /* output formatter sp setup */
-#define VS6624_BLANK_DATA_MSB         0x2590 /* blank data MSB */
-#define VS6624_BLANK_DATA_LSB         0x2592 /* blank data LSB */
-#define VS6624_RGB_SETUP              0x2594 /* RGB setup */
-#define VS6624_YUV_SETUP              0x2596 /* YUV setup */
-#define VS6624_VSYNC_RIS_COARSE_H     0x2598 /* V sync rising coarse high */
-#define VS6624_VSYNC_RIS_COARSE_L     0x259A /* V sync rising coarse low */
-#define VS6624_VSYNC_RIS_FINE_H       0x259C /* V sync rising fine high */
-#define VS6624_VSYNC_RIS_FINE_L       0x259E /* V sync rising fine low */
-#define VS6624_VSYNC_FALL_COARSE_H    0x25A0 /* V sync falling coarse high */
-#define VS6624_VSYNC_FALL_COARSE_L    0x25A2 /* V sync falling coarse low */
-#define VS6624_VSYNC_FALL_FINE_H      0x25A4 /* V sync falling fine high */
-#define VS6624_VSYNC_FALL_FINE_L      0x25A6 /* V sync falling fine low */
-#define VS6624_HSYNC_RIS_H            0x25A8 /* H sync rising high */
-#define VS6624_HSYNC_RIS_L            0x25AA /* H sync rising low */
-#define VS6624_HSYNC_FALL_H           0x25AC /* H sync falling high */
-#define VS6624_HSYNC_FALL_L           0x25AE /* H sync falling low */
-#define VS6624_OUT_IF                 0x25B0 /* output interface */
-#define VS6624_CCP_EXT_DATA           0x25B2 /* CCP extra data */
-/* NoRA controls */
-#define VS6624_NORA_DISABLE           0x2600 /* NoRA control mode */
-#define VS6624_NORA_USAGE             0x2602 /* usage */
-#define VS6624_NORA_SPLIT_KN          0x2604 /* split kn */
-#define VS6624_NORA_SPLIT_NI          0x2606 /* split ni */
-#define VS6624_NORA_TIGHT_G           0x2608 /* tight green */
-#define VS6624_NORA_DISABLE_NP        0x260A /* disable noro promoting */
-#define VS6624_NORA_LOW_THR_MSB       0x260D /* low threshold for exposure MSB */
-#define VS6624_NORA_LOW_THR_LSB       0x260E /* low threshold for exposure LSB */
-#define VS6624_NORA_HIGH_THR_MSB      0x2611 /* high threshold for exposure MSB */
-#define VS6624_NORA_HIGH_THR_LSB      0x2612 /* high threshold for exposure LSB */
-#define VS6624_NORA_MIN_OUT_MSB       0x2615 /* minimum damper output MSB */
-#define VS6624_NORA_MIN_OUT_LSB       0x2616 /* minimum damper output LSB */
-
-#endif
diff --git a/drivers/media/video/wm8739.c b/drivers/media/video/wm8739.c
deleted file mode 100644
index 3bb99e9..0000000
--- a/drivers/media/video/wm8739.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * wm8739
- *
- * Copyright (C) 2005 T. Adachi <tadachi@tadachi-net.com>
- *
- * Copyright (C) 2005 Hans Verkuil <hverkuil@xs4all.nl>
- * - Cleanup
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/ioctl.h>
-#include <asm/uaccess.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-ctrls.h>
-
-MODULE_DESCRIPTION("wm8739 driver");
-MODULE_AUTHOR("T. Adachi, Hans Verkuil");
-MODULE_LICENSE("GPL");
-
-static int debug;
-
-module_param(debug, int, 0644);
-
-MODULE_PARM_DESC(debug, "Debug level (0-1)");
-
-
-/* ------------------------------------------------------------------------ */
-
-enum {
-	R0 = 0, R1,
-	R5 = 5, R6, R7, R8, R9, R15 = 15,
-	TOT_REGS
-};
-
-struct wm8739_state {
-	struct v4l2_subdev sd;
-	struct v4l2_ctrl_handler hdl;
-	struct {
-		/* audio cluster */
-		struct v4l2_ctrl *volume;
-		struct v4l2_ctrl *mute;
-		struct v4l2_ctrl *balance;
-	};
-	u32 clock_freq;
-};
-
-static inline struct wm8739_state *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct wm8739_state, sd);
-}
-
-static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
-{
-	return &container_of(ctrl->handler, struct wm8739_state, hdl)->sd;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int wm8739_write(struct v4l2_subdev *sd, int reg, u16 val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	int i;
-
-	if (reg < 0 || reg >= TOT_REGS) {
-		v4l2_err(sd, "Invalid register R%d\n", reg);
-		return -1;
-	}
-
-	v4l2_dbg(1, debug, sd, "write: %02x %02x\n", reg, val);
-
-	for (i = 0; i < 3; i++)
-		if (i2c_smbus_write_byte_data(client,
-				(reg << 1) | (val >> 8), val & 0xff) == 0)
-			return 0;
-	v4l2_err(sd, "I2C: cannot write %03x to register R%d\n", val, reg);
-	return -1;
-}
-
-static int wm8739_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-	struct wm8739_state *state = to_state(sd);
-	unsigned int work_l, work_r;
-	u8 vol_l;	/* +12dB to -34.5dB 1.5dB step (5bit) def:0dB */
-	u8 vol_r;	/* +12dB to -34.5dB 1.5dB step (5bit) def:0dB */
-	u16 mute;
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_VOLUME:
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	/* normalize ( 65535 to 0 -> 31 to 0 (12dB to -34.5dB) ) */
-	work_l = (min(65536 - state->balance->val, 32768) * state->volume->val) / 32768;
-	work_r = (min(state->balance->val, 32768) * state->volume->val) / 32768;
-
-	vol_l = (long)work_l * 31 / 65535;
-	vol_r = (long)work_r * 31 / 65535;
-
-	/* set audio volume etc. */
-	mute = state->mute->val ? 0x80 : 0;
-
-	/* Volume setting: bits 0-4, 0x1f = 12 dB, 0x00 = -34.5 dB
-	 * Default setting: 0x17 = 0 dB
-	 */
-	wm8739_write(sd, R0, (vol_l & 0x1f) | mute);
-	wm8739_write(sd, R1, (vol_r & 0x1f) | mute);
-	return 0;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static int wm8739_s_clock_freq(struct v4l2_subdev *sd, u32 audiofreq)
-{
-	struct wm8739_state *state = to_state(sd);
-
-	state->clock_freq = audiofreq;
-	/* de-activate */
-	wm8739_write(sd, R9, 0x000);
-	switch (audiofreq) {
-	case 44100:
-		/* 256fps, fs=44.1k */
-		wm8739_write(sd, R8, 0x020);
-		break;
-	case 48000:
-		/* 256fps, fs=48k */
-		wm8739_write(sd, R8, 0x000);
-		break;
-	case 32000:
-		/* 256fps, fs=32k */
-		wm8739_write(sd, R8, 0x018);
-		break;
-	default:
-		break;
-	}
-	/* activate */
-	wm8739_write(sd, R9, 0x001);
-	return 0;
-}
-
-static int wm8739_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_WM8739, 0);
-}
-
-static int wm8739_log_status(struct v4l2_subdev *sd)
-{
-	struct wm8739_state *state = to_state(sd);
-
-	v4l2_info(sd, "Frequency: %u Hz\n", state->clock_freq);
-	v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_ctrl_ops wm8739_ctrl_ops = {
-	.s_ctrl = wm8739_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops wm8739_core_ops = {
-	.log_status = wm8739_log_status,
-	.g_chip_ident = wm8739_g_chip_ident,
-	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
-	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
-	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
-	.g_ctrl = v4l2_subdev_g_ctrl,
-	.s_ctrl = v4l2_subdev_s_ctrl,
-	.queryctrl = v4l2_subdev_queryctrl,
-	.querymenu = v4l2_subdev_querymenu,
-};
-
-static const struct v4l2_subdev_audio_ops wm8739_audio_ops = {
-	.s_clock_freq = wm8739_s_clock_freq,
-};
-
-static const struct v4l2_subdev_ops wm8739_ops = {
-	.core = &wm8739_core_ops,
-	.audio = &wm8739_audio_ops,
-};
-
-/* ------------------------------------------------------------------------ */
-
-/* i2c implementation */
-
-static int wm8739_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	struct wm8739_state *state;
-	struct v4l2_subdev *sd;
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -EIO;
-
-	v4l_info(client, "chip found @ 0x%x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	state = kzalloc(sizeof(struct wm8739_state), GFP_KERNEL);
-	if (state == NULL)
-		return -ENOMEM;
-	sd = &state->sd;
-	v4l2_i2c_subdev_init(sd, client, &wm8739_ops);
-	v4l2_ctrl_handler_init(&state->hdl, 2);
-	state->volume = v4l2_ctrl_new_std(&state->hdl, &wm8739_ctrl_ops,
-			V4L2_CID_AUDIO_VOLUME, 0, 65535, 65535 / 100, 50736);
-	state->mute = v4l2_ctrl_new_std(&state->hdl, &wm8739_ctrl_ops,
-			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
-	state->balance = v4l2_ctrl_new_std(&state->hdl, &wm8739_ctrl_ops,
-			V4L2_CID_AUDIO_BALANCE, 0, 65535, 65535 / 100, 32768);
-	sd->ctrl_handler = &state->hdl;
-	if (state->hdl.error) {
-		int err = state->hdl.error;
-
-		v4l2_ctrl_handler_free(&state->hdl);
-		kfree(state);
-		return err;
-	}
-	v4l2_ctrl_cluster(3, &state->volume);
-
-	state->clock_freq = 48000;
-
-	/* Initialize wm8739 */
-
-	/* reset */
-	wm8739_write(sd, R15, 0x00);
-	/* filter setting, high path, offet clear */
-	wm8739_write(sd, R5, 0x000);
-	/* ADC, OSC, Power Off mode Disable */
-	wm8739_write(sd, R6, 0x000);
-	/* Digital Audio interface format:
-	   Enable Master mode, 24 bit, MSB first/left justified */
-	wm8739_write(sd, R7, 0x049);
-	/* sampling control: normal, 256fs, 48KHz sampling rate */
-	wm8739_write(sd, R8, 0x000);
-	/* activate */
-	wm8739_write(sd, R9, 0x001);
-	/* set volume/mute */
-	v4l2_ctrl_handler_setup(&state->hdl);
-	return 0;
-}
-
-static int wm8739_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct wm8739_state *state = to_state(sd);
-
-	v4l2_device_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(&state->hdl);
-	kfree(to_state(sd));
-	return 0;
-}
-
-static const struct i2c_device_id wm8739_id[] = {
-	{ "wm8739", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, wm8739_id);
-
-static struct i2c_driver wm8739_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "wm8739",
-	},
-	.probe		= wm8739_probe,
-	.remove		= wm8739_remove,
-	.id_table	= wm8739_id,
-};
-
-module_i2c_driver(wm8739_driver);
diff --git a/drivers/media/video/wm8775.c b/drivers/media/video/wm8775.c
deleted file mode 100644
index bee77ea..0000000
--- a/drivers/media/video/wm8775.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * wm8775 - driver version 0.0.1
- *
- * Copyright (C) 2004 Ulf Eklund <ivtv at eklund.to>
- *
- * Based on saa7115 driver
- *
- * Copyright (C) 2005 Hans Verkuil <hverkuil@xs4all.nl>
- * - Cleanup
- * - V4L2 API update
- * - sound fixes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/ioctl.h>
-#include <asm/uaccess.h>
-#include <linux/i2c.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-ctrls.h>
-#include <media/wm8775.h>
-
-MODULE_DESCRIPTION("wm8775 driver");
-MODULE_AUTHOR("Ulf Eklund, Hans Verkuil");
-MODULE_LICENSE("GPL");
-
-
-
-/* ----------------------------------------------------------------------- */
-
-enum {
-	R7 = 7, R11 = 11,
-	R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R23 = 23,
-	TOT_REGS
-};
-
-#define ALC_HOLD 0x85 /* R17: use zero cross detection, ALC hold time 42.6 ms */
-#define ALC_EN 0x100  /* R17: ALC enable */
-
-struct wm8775_state {
-	struct v4l2_subdev sd;
-	struct v4l2_ctrl_handler hdl;
-	struct v4l2_ctrl *mute;
-	struct v4l2_ctrl *vol;
-	struct v4l2_ctrl *bal;
-	struct v4l2_ctrl *loud;
-	u8 input;		/* Last selected input (0-0xf) */
-};
-
-static inline struct wm8775_state *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct wm8775_state, sd);
-}
-
-static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
-{
-	return &container_of(ctrl->handler, struct wm8775_state, hdl)->sd;
-}
-
-static int wm8775_write(struct v4l2_subdev *sd, int reg, u16 val)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	int i;
-
-	if (reg < 0 || reg >= TOT_REGS) {
-		v4l2_err(sd, "Invalid register R%d\n", reg);
-		return -1;
-	}
-
-	for (i = 0; i < 3; i++)
-		if (i2c_smbus_write_byte_data(client,
-				(reg << 1) | (val >> 8), val & 0xff) == 0)
-			return 0;
-	v4l2_err(sd, "I2C: cannot write %03x to register R%d\n", val, reg);
-	return -1;
-}
-
-static void wm8775_set_audio(struct v4l2_subdev *sd, int quietly)
-{
-	struct wm8775_state *state = to_state(sd);
-	u8 vol_l, vol_r;
-	int muted = 0 != state->mute->val;
-	u16 volume = (u16)state->vol->val;
-	u16 balance = (u16)state->bal->val;
-
-	/* normalize ( 65535 to 0 -> 255 to 0 (+24dB to -103dB) ) */
-	vol_l = (min(65536 - balance, 32768) * volume) >> 23;
-	vol_r = (min(balance, (u16)32768) * volume) >> 23;
-
-	/* Mute */
-	if (muted || quietly)
-		wm8775_write(sd, R21, 0x0c0 | state->input);
-
-	wm8775_write(sd, R14, vol_l | 0x100); /* 0x100= Left channel ADC zero cross enable */
-	wm8775_write(sd, R15, vol_r | 0x100); /* 0x100= Right channel ADC zero cross enable */
-
-	/* Un-mute */
-	if (!muted)
-		wm8775_write(sd, R21, state->input);
-}
-
-static int wm8775_s_routing(struct v4l2_subdev *sd,
-			    u32 input, u32 output, u32 config)
-{
-	struct wm8775_state *state = to_state(sd);
-
-	/* There are 4 inputs and one output. Zero or more inputs
-	   are multiplexed together to the output. Hence there are
-	   16 combinations.
-	   If only one input is active (the normal case) then the
-	   input values 1, 2, 4 or 8 should be used. */
-	if (input > 15) {
-		v4l2_err(sd, "Invalid input %d.\n", input);
-		return -EINVAL;
-	}
-	state->input = input;
-	if (!v4l2_ctrl_g_ctrl(state->mute))
-		return 0;
-	if (!v4l2_ctrl_g_ctrl(state->vol))
-		return 0;
-	if (!v4l2_ctrl_g_ctrl(state->bal))
-		return 0;
-	wm8775_set_audio(sd, 1);
-	return 0;
-}
-
-static int wm8775_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct v4l2_subdev *sd = to_sd(ctrl);
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_MUTE:
-	case V4L2_CID_AUDIO_VOLUME:
-	case V4L2_CID_AUDIO_BALANCE:
-		wm8775_set_audio(sd, 0);
-		return 0;
-	case V4L2_CID_AUDIO_LOUDNESS:
-		wm8775_write(sd, R17, (ctrl->val ? ALC_EN : 0) | ALC_HOLD);
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static int wm8775_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_WM8775, 0);
-}
-
-static int wm8775_log_status(struct v4l2_subdev *sd)
-{
-	struct wm8775_state *state = to_state(sd);
-
-	v4l2_info(sd, "Input: %d\n", state->input);
-	v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
-	return 0;
-}
-
-static int wm8775_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *freq)
-{
-	wm8775_set_audio(sd, 0);
-	return 0;
-}
-
-/* ----------------------------------------------------------------------- */
-
-static const struct v4l2_ctrl_ops wm8775_ctrl_ops = {
-	.s_ctrl = wm8775_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops wm8775_core_ops = {
-	.log_status = wm8775_log_status,
-	.g_chip_ident = wm8775_g_chip_ident,
-	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
-	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
-	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
-	.g_ctrl = v4l2_subdev_g_ctrl,
-	.s_ctrl = v4l2_subdev_s_ctrl,
-	.queryctrl = v4l2_subdev_queryctrl,
-	.querymenu = v4l2_subdev_querymenu,
-};
-
-static const struct v4l2_subdev_tuner_ops wm8775_tuner_ops = {
-	.s_frequency = wm8775_s_frequency,
-};
-
-static const struct v4l2_subdev_audio_ops wm8775_audio_ops = {
-	.s_routing = wm8775_s_routing,
-};
-
-static const struct v4l2_subdev_ops wm8775_ops = {
-	.core = &wm8775_core_ops,
-	.tuner = &wm8775_tuner_ops,
-	.audio = &wm8775_audio_ops,
-};
-
-/* ----------------------------------------------------------------------- */
-
-/* i2c implementation */
-
-/*
- * Generic i2c probe
- * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
- */
-
-static int wm8775_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	struct wm8775_state *state;
-	struct v4l2_subdev *sd;
-	int err;
-	bool is_nova_s = false;
-
-	if (client->dev.platform_data) {
-		struct wm8775_platform_data *data = client->dev.platform_data;
-		is_nova_s = data->is_nova_s;
-	}
-
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -EIO;
-
-	v4l_info(client, "chip found @ 0x%02x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	state = kzalloc(sizeof(struct wm8775_state), GFP_KERNEL);
-	if (state == NULL)
-		return -ENOMEM;
-	sd = &state->sd;
-	v4l2_i2c_subdev_init(sd, client, &wm8775_ops);
-	state->input = 2;
-
-	v4l2_ctrl_handler_init(&state->hdl, 4);
-	state->mute = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
-			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
-	state->vol = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
-			V4L2_CID_AUDIO_VOLUME, 0, 65535, (65535+99)/100, 0xCF00); /* 0dB*/
-	state->bal = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
-			V4L2_CID_AUDIO_BALANCE, 0, 65535, (65535+99)/100, 32768);
-	state->loud = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
-			V4L2_CID_AUDIO_LOUDNESS, 0, 1, 1, 1);
-	sd->ctrl_handler = &state->hdl;
-	err = state->hdl.error;
-	if (err) {
-		v4l2_ctrl_handler_free(&state->hdl);
-		kfree(state);
-		return err;
-	}
-
-	/* Initialize wm8775 */
-
-	/* RESET */
-	wm8775_write(sd, R23, 0x000);
-	/* Disable zero cross detect timeout */
-	wm8775_write(sd, R7, 0x000);
-	/* HPF enable, left justified, 24-bit (Philips) mode */
-	wm8775_write(sd, R11, 0x021);
-	/* Master mode, clock ratio 256fs */
-	wm8775_write(sd, R12, 0x102);
-	/* Powered up */
-	wm8775_write(sd, R13, 0x000);
-
-	if (!is_nova_s) {
-		/* ADC gain +2.5dB, enable zero cross */
-		wm8775_write(sd, R14, 0x1d4);
-		/* ADC gain +2.5dB, enable zero cross */
-		wm8775_write(sd, R15, 0x1d4);
-		/* ALC Stereo, ALC target level -1dB FS max gain +8dB */
-		wm8775_write(sd, R16, 0x1bf);
-		/* Enable gain control, use zero cross detection,
-		   ALC hold time 42.6 ms */
-		wm8775_write(sd, R17, 0x185);
-	} else {
-		/* ALC stereo, ALC target level -5dB FS, ALC max gain +8dB */
-		wm8775_write(sd, R16, 0x1bb);
-		/* Set ALC mode and hold time */
-		wm8775_write(sd, R17, (state->loud->val ? ALC_EN : 0) | ALC_HOLD);
-	}
-	/* ALC gain ramp up delay 34 s, ALC gain ramp down delay 33 ms */
-	wm8775_write(sd, R18, 0x0a2);
-	/* Enable noise gate, threshold -72dBfs */
-	wm8775_write(sd, R19, 0x005);
-	if (!is_nova_s) {
-		/* Transient window 4ms, lower PGA gain limit -1dB */
-		wm8775_write(sd, R20, 0x07a);
-		/* LRBOTH = 1, use input 2. */
-		wm8775_write(sd, R21, 0x102);
-	} else {
-		/* Transient window 4ms, ALC min gain -5dB  */
-		wm8775_write(sd, R20, 0x0fb);
-
-		wm8775_set_audio(sd, 1);      /* set volume/mute/mux */
-	}
-	return 0;
-}
-
-static int wm8775_remove(struct i2c_client *client)
-{
-	struct v4l2_subdev *sd = i2c_get_clientdata(client);
-	struct wm8775_state *state = to_state(sd);
-
-	v4l2_device_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(&state->hdl);
-	kfree(state);
-	return 0;
-}
-
-static const struct i2c_device_id wm8775_id[] = {
-	{ "wm8775", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, wm8775_id);
-
-static struct i2c_driver wm8775_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "wm8775",
-	},
-	.probe		= wm8775_probe,
-	.remove		= wm8775_remove,
-	.id_table	= wm8775_id,
-};
-
-module_i2c_driver(wm8775_driver);