V4L/DVB (3395): Fixed Pinnacle 300i DVB-T support

- fixed tda9886 port 2 setting
- turned remote control receiver off via saa7134 GPIO to avoid i2c hangs
- modified tda9886 client calls to direct i2c access to allow proper return
  to analog mode
- allow mode change to V4L2_TUNER_DIGITAL_TV in tuner VIDIOC_S_FREQUENCY
  client call

Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

2 files changed, 15 insertions, 6 deletions

diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index ccf7231..722ebff 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -1003,7 +1003,7 @@ struct saa7134_board saa7134_boards[] = {
 		.radio_type     = UNSET,
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr	= ADDR_UNSET,
-		.tda9887_conf   = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE,
+		.tda9887_conf   = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE,
 		.inputs         = {{
 			.name = name_tv,
 			.vmux = 3,
@@ -1692,7 +1692,7 @@ struct saa7134_board saa7134_boards[] = {
 		.radio_type     = UNSET,
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr	= ADDR_UNSET,
-		.tda9887_conf   = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE,
+		.tda9887_conf   = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE,
 		.mpeg           = SAA7134_MPEG_DVB,
 		.inputs         = {{
 			.name = name_tv,
@@ -3375,6 +3375,11 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 		/* power-up tuner chip */
 		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x00040000, 0x00040000);
 		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000000);
+	case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
+		/* this turns the remote control chip off to work around a bug in it */
+		saa_writeb(SAA7134_GPIO_GPMODE1, 0x80);
+		saa_writeb(SAA7134_GPIO_GPSTATUS1, 0x80);
+		break;
 	case SAA7134_BOARD_MONSTERTV_MOBILE:
 		/* power-up tuner chip */
 		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x00040000, 0x00040000);
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 7577962..5969481 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -110,6 +110,7 @@ static int mt352_pinnacle_init(struct dvb_frontend* fe)
 	mt352_write(fe, fsm_ctl_cfg,    sizeof(fsm_ctl_cfg));
 	mt352_write(fe, scan_ctl_cfg,   sizeof(scan_ctl_cfg));
 	mt352_write(fe, irq_cfg,        sizeof(irq_cfg));
+
 	return 0;
 }
 
@@ -135,8 +136,10 @@ static int mt352_pinnacle_pll_set(struct dvb_frontend* fe,
 				  struct dvb_frontend_parameters* params,
 				  u8* pllbuf)
 {
-	static int on  = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
-	static int off = TDA9887_PRESENT | TDA9887_PORT2_ACTIVE;
+	u8 off[] = { 0x00, 0xf1};
+	u8 on[]  = { 0x00, 0x71};
+	struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)};
+
 	struct saa7134_dev *dev = fe->dvb->priv;
 	struct v4l2_frequency f;
 
@@ -144,9 +147,10 @@ static int mt352_pinnacle_pll_set(struct dvb_frontend* fe,
 	f.tuner     = 0;
 	f.type      = V4L2_TUNER_DIGITAL_TV;
 	f.frequency = params->frequency / 1000 * 16 / 1000;
-	saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on);
+	i2c_transfer(&dev->i2c_adap, &msg, 1);
 	saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
-	saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&off);
+	msg.buf = on;
+	i2c_transfer(&dev->i2c_adap, &msg, 1);
 
 	pinnacle_antenna_pwr(dev, antenna_pwr);