diff options
| author | Eddi De Pieri <eddi@depieri.net> | 2011-11-19 11:37:14 -0300 |
|---|---|---|
| committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2011-11-20 11:24:20 -0200 |
| commit | 82e7dbbd4a16274b0a7038978734fc11bbf9f4b6 (patch) | |
| tree | 34ff839a8bb00c75d319c9b0f0216fb7c766783b /drivers/media/video/em28xx/em28xx-cards.c | |
| parent | 35621030c0bd5cb4f1a345cf2b4a97e290bc244a (diff) | |
| download | op-kernel-dev-82e7dbbd4a16274b0a7038978734fc11bbf9f4b6.zip op-kernel-dev-82e7dbbd4a16274b0a7038978734fc11bbf9f4b6.tar.gz | |
[media] em28xx: initial support for HAUPPAUGE HVR-930C again
With this patch I try again to add initial support for HVR930C.
Tested only DVB-T, since in Italy Analog service is stopped.
Actually "scan -a0 -f1", find only about 50 channel while 400 should
be available.
[mchehab@redhat.com: Tested with DVB-C and fixed a few whitespace issues]
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media/video/em28xx/em28xx-cards.c')
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-cards.c | 37 |
1 files changed, 35 insertions, 2 deletions
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 19a5be3..705aedf 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -336,6 +336,24 @@ static struct em28xx_reg_seq pctv_460e[] = { { -1, -1, -1, -1}, }; +static struct em28xx_reg_seq hauppauge_930c_gpio[] = { +// xc5000 reset + {EM2874_R80_GPIO, 0x6f, 0xff, 10}, + {EM2874_R80_GPIO, 0x4f, 0xff, 10}, + {EM2874_R80_GPIO, 0x6f, 0xff, 10}, + {EM2874_R80_GPIO, 0x4f, 0xff, 10}, + { -1, -1, -1, -1}, +}; + +#if 0 +static struct em28xx_reg_seq hauppauge_930c_digital[] = { + {EM2874_R80_GPIO, 0xf6, 0xff, 10}, + {EM2874_R80_GPIO, 0xe6, 0xff, 100}, + {EM2874_R80_GPIO, 0xa6, 0xff, 10}, + { -1, -1, -1, -1}, +}; +#endif + /* * Board definitions */ @@ -892,6 +910,19 @@ struct em28xx_board em28xx_boards[] = { EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, }, + [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = { + .name = "Hauppauge WinTV HVR 930C", + .has_dvb = 1, +//#if 0 +// .tuner_type = TUNER_XC5000, +// .tuner_addr = 0x41, +// .dvb_gpio = hauppauge_930c_digital, /* FIXME: probably wrong */ + .tuner_gpio = hauppauge_930c_gpio, +//#endif + .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT | + EM28XX_I2C_CLK_WAIT_ENABLE | + EM28XX_I2C_FREQ_400_KHZ, + }, [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = { .name = "Hauppauge WinTV HVR 900", .tda9887_conf = TDA9887_PRESENT, @@ -1975,6 +2006,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM28174_BOARD_PCTV_290E }, { USB_DEVICE(0x2013, 0x024c), .driver_info = EM28174_BOARD_PCTV_460E }, + { USB_DEVICE(0x2040, 0x1605), + .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C }, { }, }; MODULE_DEVICE_TABLE(usb, em28xx_id_table); @@ -2028,10 +2061,10 @@ int em28xx_tuner_callback(void *ptr, int component, int command, int arg) int rc = 0; struct em28xx *dev = ptr; - if (dev->tuner_type != TUNER_XC2028) + if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000) return 0; - if (command != XC2028_TUNER_RESET) + if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET) return 0; rc = em28xx_gpio_set(dev, dev->board.tuner_gpio); |
