V4L/DVB (6412): Audio hooks moved to another file

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

1 files changed, 2 insertions, 397 deletions

diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 6a2d372..78e5e29 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -39,6 +39,7 @@
 #include "bttvp.h"
 #include <media/v4l2-common.h>
 #include <media/tvaudio.h>
+#include "bttv-audio-hook.h"
 
 /* fwd decl */
 static void boot_msp34xx(struct bttv *btv, int pin);
@@ -50,20 +51,6 @@ static void modtec_eeprom(struct bttv *btv);
 static void init_PXC200(struct bttv *btv);
 static void init_RTV24(struct bttv *btv);
 
-static void winview_audio(struct bttv *btv, struct video_audio *v, int set);
-static void lt9415_audio(struct bttv *btv, struct video_audio *v, int set);
-static void avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v,
-				    int set);
-static void avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v,
-				      int set);
-static void terratv_audio(struct bttv *btv, struct video_audio *v, int set);
-static void gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set);
-static void gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set);
-static void winfast2000_audio(struct bttv *btv, struct video_audio *v, int set);
-static void pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set);
-static void fv2000s_audio(struct bttv *btv, struct video_audio *v, int set);
-static void windvr_audio(struct bttv *btv, struct video_audio *v, int set);
-static void adtvk503_audio(struct bttv *btv, struct video_audio *v, int set);
 static void rv605_muxsel(struct bttv *btv, unsigned int input);
 static void eagle_muxsel(struct bttv *btv, unsigned int input);
 static void xguard_muxsel(struct bttv *btv, unsigned int input);
@@ -3954,7 +3941,7 @@ static void __devinit avermedia_eeprom(struct bttv *btv)
 void bttv_tda9880_setnorm(struct bttv *btv, int norm)
 {
 	/* fix up our card entry */
-	if(norm==VIDEO_MODE_NTSC) {
+	if(norm==V4L2_STD_NTSC) {
 		bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff;
 		bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x957fff;
 		bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff;
@@ -4323,388 +4310,6 @@ void tea5757_set_freq(struct bttv *btv, unsigned short freq)
 	tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
 }
 
-
-/* ----------------------------------------------------------------------- */
-/* winview                                                                 */
-
-static void winview_audio(struct bttv *btv, struct video_audio *v, int set)
-{
-	/* PT2254A programming Jon Tombs, jon@gte.esi.us.es */
-	int bits_out, loops, vol, data;
-
-	if (!set) {
-		/* Fixed by Leandro Lucarella <luca@linuxmendoza.org.ar (07/31/01) */
-		v->flags |= VIDEO_AUDIO_VOLUME;
-		return;
-	}
-
-	/* 32 levels logarithmic */
-	vol = 32 - ((v->volume>>11));
-	/* units */
-	bits_out = (PT2254_DBS_IN_2>>(vol%5));
-	/* tens */
-	bits_out |= (PT2254_DBS_IN_10>>(vol/5));
-	bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL;
-	data = gpio_read();
-	data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA|
-		  WINVIEW_PT2254_STROBE);
-	for (loops = 17; loops >= 0 ; loops--) {
-		if (bits_out & (1<<loops))
-			data |=  WINVIEW_PT2254_DATA;
-		else
-			data &= ~WINVIEW_PT2254_DATA;
-		gpio_write(data);
-		udelay(5);
-		data |= WINVIEW_PT2254_CLK;
-		gpio_write(data);
-		udelay(5);
-		data &= ~WINVIEW_PT2254_CLK;
-		gpio_write(data);
-	}
-	data |=  WINVIEW_PT2254_STROBE;
-	data &= ~WINVIEW_PT2254_DATA;
-	gpio_write(data);
-	udelay(10);
-	data &= ~WINVIEW_PT2254_STROBE;
-	gpio_write(data);
-}
-
-/* ----------------------------------------------------------------------- */
-/* mono/stereo control for various cards (which don't use i2c chips but    */
-/* connect something to the GPIO pins                                      */
-
-static void
-gvbctv3pci_audio(struct bttv *btv, struct video_audio *v, int set)
-{
-	unsigned int con = 0;
-
-	if (set) {
-		gpio_inout(0x300, 0x300);
-		if (v->mode & VIDEO_SOUND_LANG1)
-			con = 0x000;
-		if (v->mode & VIDEO_SOUND_LANG2)
-			con = 0x300;
-		if (v->mode & VIDEO_SOUND_STEREO)
-			con = 0x200;
-/*		if (v->mode & VIDEO_SOUND_MONO)
- *			con = 0x100; */
-		gpio_bits(0x300, con);
-	} else {
-		v->mode = VIDEO_SOUND_STEREO |
-			  VIDEO_SOUND_LANG1  | VIDEO_SOUND_LANG2;
-	}
-}
-
-static void
-gvbctv5pci_audio(struct bttv *btv, struct video_audio *v, int set)
-{
-	unsigned int val, con;
-
-	if (btv->radio_user)
-		return;
-
-	val = gpio_read();
-	if (set) {
-		con = 0x000;
-		if (v->mode & VIDEO_SOUND_LANG2) {
-			if (v->mode & VIDEO_SOUND_LANG1) {
-				/* LANG1 + LANG2 */
-				con = 0x100;
-			}
-			else {
-				/* LANG2 */
-				con = 0x300;
-			}
-		}
-		if (con != (val & 0x300)) {
-			gpio_bits(0x300, con);
-			if (bttv_gpio)
-				bttv_gpio_tracking(btv,"gvbctv5pci");
-		}
-	} else {
-		switch (val & 0x70) {
-		  case 0x10:
-			v->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
-			break;
-		  case 0x30:
-			v->mode = VIDEO_SOUND_LANG2;
-			break;
-		  case 0x50:
-			v->mode = VIDEO_SOUND_LANG1;
-			break;
-		  case 0x60:
-			v->mode = VIDEO_SOUND_STEREO;
-			break;
-		  case 0x70:
-			v->mode = VIDEO_SOUND_MONO;
-			break;
-		  default:
-			v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
-				  VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
-		}
-	}
-}
-
-/*
- * Mario Medina Nussbaum <medisoft@alohabbs.org.mx>
- *  I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo,
- *  0xdde enables mono and 0xccd enables sap
- *
- * Petr Vandrovec <VANDROVE@vc.cvut.cz>
- *  P.S.: At least mask in line above is wrong - GPIO pins 3,2 select
- *  input/output sound connection, so both must be set for output mode.
- *
- * Looks like it's needed only for the "tvphone", the "tvphone 98"
- * handles this with a tda9840
- *
- */
-static void
-avermedia_tvphone_audio(struct bttv *btv, struct video_audio *v, int set)
-{
-	int val = 0;
-
-	if (set) {
-		if (v->mode & VIDEO_SOUND_LANG2)   /* SAP */
-			val = 0x02;
-		if (v->mode & VIDEO_SOUND_STEREO)
-			val = 0x01;
-		if (val) {
-			gpio_bits(0x03,val);
-			if (bttv_gpio)
-				bttv_gpio_tracking(btv,"avermedia");
-		}
-	} else {
-		v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
-			VIDEO_SOUND_LANG1;
-		return;
-	}
-}
-
-static void
-avermedia_tv_stereo_audio(struct bttv *btv, struct video_audio *v, int set)
-{
-	int val = 0;
-
-	if (set) {
-		if (v->mode & VIDEO_SOUND_LANG2)   /* SAP */
-			val = 0x01;
-		if (v->mode & VIDEO_SOUND_STEREO)  /* STEREO */
-			val = 0x02;
-		btaor(val, ~0x03, BT848_GPIO_DATA);
-		if (bttv_gpio)
-			bttv_gpio_tracking(btv,"avermedia");
-	} else {
-		v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
-			VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
-		return;
-	}
-}
-
-/* Lifetec 9415 handling */
-static void
-lt9415_audio(struct bttv *btv, struct video_audio *v, int set)
-{
-	int val = 0;
-
-	if (gpio_read() & 0x4000) {
-		v->mode = VIDEO_SOUND_MONO;
-		return;
-	}
-
-	if (set) {
-		if (v->mode & VIDEO_SOUND_LANG2)  /* A2 SAP */
-			val = 0x0080;
-		if (v->mode & VIDEO_SOUND_STEREO) /* A2 stereo */
-			val = 0x0880;
-		if ((v->mode & VIDEO_SOUND_LANG1) ||
-		    (v->mode & VIDEO_SOUND_MONO))
-			val = 0;
-		gpio_bits(0x0880, val);
-		if (bttv_gpio)
-			bttv_gpio_tracking(btv,"lt9415");
-	} else {
-		/* autodetect doesn't work with this card :-( */
-		v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
-			VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
-		return;
-	}
-}
-
-/* TDA9821 on TerraTV+ Bt848, Bt878 */
-static void
-terratv_audio(struct bttv *btv, struct video_audio *v, int set)
-{
-	unsigned int con = 0;
-
-	if (set) {
-		gpio_inout(0x180000,0x180000);
-		if (v->mode & VIDEO_SOUND_LANG2)
-			con = 0x080000;
-		if (v->mode & VIDEO_SOUND_STEREO)
-			con = 0x180000;
-		gpio_bits(0x180000, con);
-		if (bttv_gpio)
-			bttv_gpio_tracking(btv,"terratv");
-	} else {
-		v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
-			VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
-	}
-}
-
-static void
-winfast2000_audio(struct bttv *btv, struct video_audio *v, int set)
-{
-	unsigned long val = 0;
-
-	if (set) {
-		/*btor (0xc32000, BT848_GPIO_OUT_EN);*/
-		if (v->mode & VIDEO_SOUND_MONO)		/* Mono */
-			val = 0x420000;
-		if (v->mode & VIDEO_SOUND_LANG1)	/* Mono */
-			val = 0x420000;
-		if (v->mode & VIDEO_SOUND_LANG2)	/* SAP */
-			val = 0x410000;
-		if (v->mode & VIDEO_SOUND_STEREO)	/* Stereo */
-			val = 0x020000;
-		if (val) {
-			gpio_bits(0x430000, val);
-			if (bttv_gpio)
-				bttv_gpio_tracking(btv,"winfast2000");
-		}
-	} else {
-		v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
-			  VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
-	}
-}
-
-/*
- * Dariusz Kowalewski <darekk@automex.pl>
- * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM
- * revision 9B has on-board TDA9874A sound decoder).
- *
- * Note: There are card variants without tda9874a. Forcing the "stereo sound route"
- *       will mute this cards.
- */
-static void
-pvbt878p9b_audio(struct bttv *btv, struct video_audio *v, int set)
-{
-	unsigned int val = 0;
-
-	if (btv->radio_user)
-		return;
-
-	if (set) {
-		if (v->mode & VIDEO_SOUND_MONO)	{
-			val = 0x01;
-		}
-		if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
-		    || (v->mode & VIDEO_SOUND_STEREO)) {
-			val = 0x02;
-		}
-		if (val) {
-			gpio_bits(0x03,val);
-			if (bttv_gpio)
-				bttv_gpio_tracking(btv,"pvbt878p9b");
-		}
-	} else {
-		v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
-			VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
-	}
-}
-
-/*
- * Dariusz Kowalewski <darekk@automex.pl>
- * sound control for FlyVideo 2000S (with tda9874 decoder)
- * based on pvbt878p9b_audio() - this is not tested, please fix!!!
- */
-static void
-fv2000s_audio(struct bttv *btv, struct video_audio *v, int set)
-{
-	unsigned int val = 0xffff;
-
-	if (btv->radio_user)
-		return;
-
-	if (set) {
-		if (v->mode & VIDEO_SOUND_MONO)	{
-			val = 0x0000;
-		}
-		if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
-		    || (v->mode & VIDEO_SOUND_STEREO)) {
-			val = 0x1080; /*-dk-???: 0x0880, 0x0080, 0x1800 ... */
-		}
-		if (val != 0xffff) {
-			gpio_bits(0x1800, val);
-			if (bttv_gpio)
-				bttv_gpio_tracking(btv,"fv2000s");
-		}
-	} else {
-		v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
-			VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
-	}
-}
-
-/*
- * sound control for Canopus WinDVR PCI
- * Masaki Suzuki <masaki@btree.org>
- */
-static void
-windvr_audio(struct bttv *btv, struct video_audio *v, int set)
-{
-	unsigned long val = 0;
-
-	if (set) {
-		if (v->mode & VIDEO_SOUND_MONO)
-			val = 0x040000;
-		if (v->mode & VIDEO_SOUND_LANG1)
-			val = 0;
-		if (v->mode & VIDEO_SOUND_LANG2)
-			val = 0x100000;
-		if (v->mode & VIDEO_SOUND_STEREO)
-			val = 0;
-		if (val) {
-			gpio_bits(0x140000, val);
-			if (bttv_gpio)
-				bttv_gpio_tracking(btv,"windvr");
-		}
-	} else {
-		v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
-			  VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
-	}
-}
-
-/*
- * sound control for AD-TVK503
- * Hiroshi Takekawa <sian@big.or.jp>
- */
-static void
-adtvk503_audio(struct bttv *btv, struct video_audio *v, int set)
-{
-	unsigned int con = 0xffffff;
-
-	/* btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN); */
-
-	if (set) {
-		/* btor(***, BT848_GPIO_OUT_EN); */
-		if (v->mode & VIDEO_SOUND_LANG1)
-			con = 0x00000000;
-		if (v->mode & VIDEO_SOUND_LANG2)
-			con = 0x00180000;
-		if (v->mode & VIDEO_SOUND_STEREO)
-			con = 0x00000000;
-		if (v->mode & VIDEO_SOUND_MONO)
-			con = 0x00060000;
-		if (con != 0xffffff) {
-			gpio_bits(0x1e0000,con);
-			if (bttv_gpio)
-				bttv_gpio_tracking(btv, "adtvk503");
-		}
-	} else {
-		v->mode = VIDEO_SOUND_MONO | VIDEO_SOUND_STEREO |
-			  VIDEO_SOUND_LANG1  | VIDEO_SOUND_LANG2;
-	}
-}
-
 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
  *
  * This is needed because rv605 don't use a normal multiplex, but a crosspoint