diff options
author | Mauro Carvalho Chehab <mchehab@redhat.com> | 2013-04-10 15:54:46 -0300 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2013-04-16 21:32:27 -0300 |
commit | d75d538899da00bdf8f152c65a99eda1ab59daa3 (patch) | |
tree | ac90e2118786afbc380968f56c22f0b2cd27af58 /drivers/media/tuners | |
parent | 9cc2570a1dd74c22b4644b325257cf92d4cdb031 (diff) | |
download | op-kernel-dev-d75d538899da00bdf8f152c65a99eda1ab59daa3.zip op-kernel-dev-d75d538899da00bdf8f152c65a99eda1ab59daa3.tar.gz |
[media] r820t: proper initialize the PLL register
The rtl-sdr library, from where this driver was initially
based, doesn't use half PLL clock, but this is used on
the Realtek Kernel driver. So, also do the same here.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: Antti Palosaari <crope@iki.fi>
Diffstat (limited to 'drivers/media/tuners')
-rw-r--r-- | drivers/media/tuners/r820t.c | 43 | ||||
-rw-r--r-- | drivers/media/tuners/r820t.h | 3 |
2 files changed, 31 insertions, 15 deletions
diff --git a/drivers/media/tuners/r820t.c b/drivers/media/tuners/r820t.c index 279be4f..07d0323 100644 --- a/drivers/media/tuners/r820t.c +++ b/drivers/media/tuners/r820t.c @@ -522,10 +522,12 @@ static int r820t_set_mux(struct r820t_priv *priv, u32 freq) return rc; } -static int r820t_set_pll(struct r820t_priv *priv, u32 freq) +static int r820t_set_pll(struct r820t_priv *priv, enum v4l2_tuner_type type, + u32 freq) { u64 tmp64, vco_freq; int rc, i; + unsigned sleep_time = 10000; u32 vco_fra; /* VCO contribution by SDM (kHz) */ u32 vco_min = 1770000; u32 vco_max = vco_min * 2; @@ -535,17 +537,34 @@ static int r820t_set_pll(struct r820t_priv *priv, u32 freq) u8 mix_div = 2; u8 div_buf = 0; u8 div_num = 0; + u8 refdiv2 = 0; u8 ni, si, nint, vco_fine_tune, val; u8 data[5]; - freq = freq / 1000; /* Frequency in kHz */ - + /* Frequency in kHz */ + freq = freq / 1000; pll_ref = priv->cfg->xtal / 1000; - tuner_dbg("set r820t pll for frequency %d kHz = %d\n", freq, pll_ref); + if ((priv->cfg->rafael_chip == CHIP_R620D) || + (priv->cfg->rafael_chip == CHIP_R828D) || + (priv->cfg->rafael_chip == CHIP_R828)) { + /* ref set refdiv2, reffreq = Xtal/2 on ATV application */ + if (type != V4L2_TUNER_DIGITAL_TV) { + pll_ref /= 2; + refdiv2 = 0x10; + sleep_time = 20000; + } + } else { + if (priv->cfg->xtal > 24000000) { + pll_ref /= 2; + refdiv2 = 0x10; + } + } - /* FIXME: this seems to be a hack - probably it can be removed */ - rc = r820t_write_reg_mask(priv, 0x10, 0x00, 0x00); + tuner_dbg("set r820t pll for frequency %d kHz = %d%s\n", + freq, pll_ref, refdiv2 ? " / 2" : ""); + + rc = r820t_write_reg_mask(priv, 0x10, refdiv2, 0x10); if (rc < 0) return rc; @@ -598,8 +617,6 @@ static int r820t_set_pll(struct r820t_priv *priv, u32 freq) do_div(tmp64, 1000); vco_fra = (u16)(tmp64); - pll_ref /= 1000; - /* boundary spur prevention */ if (vco_fra < pll_ref / 64) { vco_fra = 0; @@ -653,11 +670,7 @@ static int r820t_set_pll(struct r820t_priv *priv, u32 freq) return rc; for (i = 0; i < 2; i++) { - /* - * FIXME: Rafael chips R620D, R828D and R828 seems to - * need 20 ms for analog TV - */ - usleep_range(10000, 11000); + usleep_range(sleep_time, sleep_time + 1000); /* Check if PLL has locked */ rc = r820t_read(priv, 0x00, data, 3); @@ -1040,7 +1053,7 @@ static int r820t_set_tv_standard(struct r820t_priv *priv, if (rc < 0) return rc; - rc = r820t_set_pll(priv, filt_cal_lo); + rc = r820t_set_pll(priv, type, filt_cal_lo); if (rc < 0 || !priv->has_lock) return rc; @@ -1244,7 +1257,7 @@ static int generic_set_freq(struct dvb_frontend *fe, if (rc < 0) goto err; - rc = r820t_set_pll(priv, lo_freq); + rc = r820t_set_pll(priv, type, lo_freq); if (rc < 0 || !priv->has_lock) goto err; diff --git a/drivers/media/tuners/r820t.h b/drivers/media/tuners/r820t.h index 949575a..4c0823b 100644 --- a/drivers/media/tuners/r820t.h +++ b/drivers/media/tuners/r820t.h @@ -26,6 +26,9 @@ enum r820t_chip { CHIP_R820T, + CHIP_R620D, + CHIP_R828D, + CHIP_R828, CHIP_R828S, CHIP_R820C, }; |