summaryrefslogtreecommitdiffstats
path: root/drivers/media/rc
diff options
context:
space:
mode:
authorSean Young <sean@mess.org>2013-01-06 13:19:43 -0300
committerMauro Carvalho Chehab <mchehab@redhat.com>2013-02-05 18:59:23 -0200
commit6f2627c29f6619ebdbc6de8934b33c23b73be8e6 (patch)
tree86602ab2d00ca893e25f1be0020c23fab7319e5c /drivers/media/rc
parent3e85a44aacd68744765f2fc7f0645645b34e64f8 (diff)
downloadop-kernel-dev-6f2627c29f6619ebdbc6de8934b33c23b73be8e6.zip
op-kernel-dev-6f2627c29f6619ebdbc6de8934b33c23b73be8e6.tar.gz
[media] winbond-cir: only enable higher sample resolution if needed
A sample resolution of 2us generates more than 300 interrupts per key and this resolution is not needed unless carrier reports are enabled. Revert to a resolution of 10us unless carrier reports are needed. This generates up to a fifth of the interrupts. Signed-off-by: Sean Young <sean@mess.org> Acked-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media/rc')
-rw-r--r--drivers/media/rc/winbond-cir.c27
1 files changed, 19 insertions, 8 deletions
diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c
index 8542485..535a18d 100644
--- a/drivers/media/rc/winbond-cir.c
+++ b/drivers/media/rc/winbond-cir.c
@@ -154,6 +154,8 @@
#define WBCIR_CNTR_R 0x02
/* Invert TX */
#define WBCIR_IRTX_INV 0x04
+/* Receiver oversampling */
+#define WBCIR_RX_T_OV 0x40
/* Valid banks for the SP3 UART */
enum wbcir_bank {
@@ -394,7 +396,8 @@ wbcir_irq_rx(struct wbcir_data *data, struct pnp_dev *device)
if (data->rxstate == WBCIR_RXSTATE_ERROR)
continue;
- duration = ((irdata & 0x7F) + 1) * 2;
+ duration = ((irdata & 0x7F) + 1) *
+ (data->carrier_report_enabled ? 2 : 10);
rawir.pulse = irdata & 0x80 ? false : true;
rawir.duration = US_TO_NS(duration);
@@ -550,6 +553,17 @@ wbcir_set_carrier_report(struct rc_dev *dev, int enable)
wbcir_set_bits(data->ebase + WBCIR_REG_ECEIR_CCTL,
WBCIR_CNTR_EN, WBCIR_CNTR_EN | WBCIR_CNTR_R);
+ /* Set a higher sampling resolution if carrier reports are enabled */
+ wbcir_select_bank(data, WBCIR_BANK_2);
+ data->dev->rx_resolution = US_TO_NS(enable ? 2 : 10);
+ outb(enable ? 0x03 : 0x0f, data->sbase + WBCIR_REG_SP3_BGDL);
+ outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH);
+
+ /* Enable oversampling if carrier reports are enabled */
+ wbcir_select_bank(data, WBCIR_BANK_7);
+ wbcir_set_bits(data->sbase + WBCIR_REG_SP3_RCCFG,
+ enable ? WBCIR_RX_T_OV : 0, WBCIR_RX_T_OV);
+
data->carrier_report_enabled = enable;
spin_unlock_irqrestore(&data->spinlock, flags);
@@ -931,8 +945,8 @@ wbcir_init_hw(struct wbcir_data *data)
/* prescaler 1.0, tx/rx fifo lvl 16 */
outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2);
- /* Set baud divisor to sample every 2 ns */
- outb(0x03, data->sbase + WBCIR_REG_SP3_BGDL);
+ /* Set baud divisor to sample every 10 us */
+ outb(0x0f, data->sbase + WBCIR_REG_SP3_BGDL);
outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH);
/* Set CEIR mode */
@@ -941,12 +955,9 @@ wbcir_init_hw(struct wbcir_data *data)
inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */
inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */
- /*
- * Disable RX demod, enable run-length enc/dec, set freq span and
- * enable over-sampling
- */
+ /* Disable RX demod, enable run-length enc/dec, set freq span */
wbcir_select_bank(data, WBCIR_BANK_7);
- outb(0xd0, data->sbase + WBCIR_REG_SP3_RCCFG);
+ outb(0x90, data->sbase + WBCIR_REG_SP3_RCCFG);
/* Disable timer */
wbcir_select_bank(data, WBCIR_BANK_4);
OpenPOWER on IntegriCloud