[media] omap24xx/tcm825x: move to staging for future removal

The omap24xx driver and the tcm825x sensor driver are the only two
remaining drivers to still use the old deprecated v4l2-int-device API.

Nobody maintains these drivers anymore. But unfortunately the v4l2-int-device
API is used by out-of-tree drivers (MXC platform). This is a very bad situation
since as long as this deprecated API stays in the kernel there is no reason for
those out-of-tree drivers to convert.

This patch moves v4l2-int-device and the two drivers that depend on it to
staging in preparation for their removal.

If someone would be interested in getting these drivers to work, then start with
this since it's not very far from the state where they used to work:

<URL:http://vihersipuli.retiisi.org.uk/cgi-bin/gitweb.cgi?p=~sailus/linux-omap/.git;a=summary>

The branch is n800-cam. Porting to up-to-date APIs can then be done. David
might have done some work in that area, so check with him first.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: David Cohen <dacohen@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

1 files changed, 0 insertions, 601 deletions

diff --git a/drivers/media/platform/omap24xxcam-dma.c b/drivers/media/platform/omap24xxcam-dma.c
deleted file mode 100644
index 9c00776..0000000
--- a/drivers/media/platform/omap24xxcam-dma.c
+++ /dev/null
@@ -1,601 +0,0 @@
-/*
- * drivers/media/platform/omap24xxcam-dma.c
- *
- * Copyright (C) 2004 MontaVista Software, Inc.
- * Copyright (C) 2004 Texas Instruments.
- * Copyright (C) 2007 Nokia Corporation.
- *
- * Contact: Sakari Ailus <sakari.ailus@nokia.com>
- *
- * Based on code from Andy Lowe <source@mvista.com> and
- *                    David Cohen <david.cohen@indt.org.br>.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/scatterlist.h>
-
-#include "omap24xxcam.h"
-
-/*
- *
- * DMA hardware.
- *
- */
-
-/* Ack all interrupt on CSR and IRQSTATUS_L0 */
-static void omap24xxcam_dmahw_ack_all(void __iomem *base)
-{
-	u32 csr;
-	int i;
-
-	for (i = 0; i < NUM_CAMDMA_CHANNELS; ++i) {
-		csr = omap24xxcam_reg_in(base, CAMDMA_CSR(i));
-		/* ack interrupt in CSR */
-		omap24xxcam_reg_out(base, CAMDMA_CSR(i), csr);
-	}
-	omap24xxcam_reg_out(base, CAMDMA_IRQSTATUS_L0, 0xf);
-}
-
-/* Ack dmach on CSR and IRQSTATUS_L0 */
-static u32 omap24xxcam_dmahw_ack_ch(void __iomem *base, int dmach)
-{
-	u32 csr;
-
-	csr = omap24xxcam_reg_in(base, CAMDMA_CSR(dmach));
-	/* ack interrupt in CSR */
-	omap24xxcam_reg_out(base, CAMDMA_CSR(dmach), csr);
-	/* ack interrupt in IRQSTATUS */
-	omap24xxcam_reg_out(base, CAMDMA_IRQSTATUS_L0, (1 << dmach));
-
-	return csr;
-}
-
-static int omap24xxcam_dmahw_running(void __iomem *base, int dmach)
-{
-	return omap24xxcam_reg_in(base, CAMDMA_CCR(dmach)) & CAMDMA_CCR_ENABLE;
-}
-
-static void omap24xxcam_dmahw_transfer_setup(void __iomem *base, int dmach,
-					     dma_addr_t start, u32 len)
-{
-	omap24xxcam_reg_out(base, CAMDMA_CCR(dmach),
-			    CAMDMA_CCR_SEL_SRC_DST_SYNC
-			    | CAMDMA_CCR_BS
-			    | CAMDMA_CCR_DST_AMODE_POST_INC
-			    | CAMDMA_CCR_SRC_AMODE_POST_INC
-			    | CAMDMA_CCR_FS
-			    | CAMDMA_CCR_WR_ACTIVE
-			    | CAMDMA_CCR_RD_ACTIVE
-			    | CAMDMA_CCR_SYNCHRO_CAMERA);
-	omap24xxcam_reg_out(base, CAMDMA_CLNK_CTRL(dmach), 0);
-	omap24xxcam_reg_out(base, CAMDMA_CEN(dmach), len);
-	omap24xxcam_reg_out(base, CAMDMA_CFN(dmach), 1);
-	omap24xxcam_reg_out(base, CAMDMA_CSDP(dmach),
-			    CAMDMA_CSDP_WRITE_MODE_POSTED
-			    | CAMDMA_CSDP_DST_BURST_EN_32
-			    | CAMDMA_CSDP_DST_PACKED
-			    | CAMDMA_CSDP_SRC_BURST_EN_32
-			    | CAMDMA_CSDP_SRC_PACKED
-			    | CAMDMA_CSDP_DATA_TYPE_8BITS);
-	omap24xxcam_reg_out(base, CAMDMA_CSSA(dmach), 0);
-	omap24xxcam_reg_out(base, CAMDMA_CDSA(dmach), start);
-	omap24xxcam_reg_out(base, CAMDMA_CSEI(dmach), 0);
-	omap24xxcam_reg_out(base, CAMDMA_CSFI(dmach), DMA_THRESHOLD);
-	omap24xxcam_reg_out(base, CAMDMA_CDEI(dmach), 0);
-	omap24xxcam_reg_out(base, CAMDMA_CDFI(dmach), 0);
-	omap24xxcam_reg_out(base, CAMDMA_CSR(dmach),
-			    CAMDMA_CSR_MISALIGNED_ERR
-			    | CAMDMA_CSR_SECURE_ERR
-			    | CAMDMA_CSR_TRANS_ERR
-			    | CAMDMA_CSR_BLOCK
-			    | CAMDMA_CSR_DROP);
-	omap24xxcam_reg_out(base, CAMDMA_CICR(dmach),
-			    CAMDMA_CICR_MISALIGNED_ERR_IE
-			    | CAMDMA_CICR_SECURE_ERR_IE
-			    | CAMDMA_CICR_TRANS_ERR_IE
-			    | CAMDMA_CICR_BLOCK_IE
-			    | CAMDMA_CICR_DROP_IE);
-}
-
-static void omap24xxcam_dmahw_transfer_start(void __iomem *base, int dmach)
-{
-	omap24xxcam_reg_out(base, CAMDMA_CCR(dmach),
-			    CAMDMA_CCR_SEL_SRC_DST_SYNC
-			    | CAMDMA_CCR_BS
-			    | CAMDMA_CCR_DST_AMODE_POST_INC
-			    | CAMDMA_CCR_SRC_AMODE_POST_INC
-			    | CAMDMA_CCR_ENABLE
-			    | CAMDMA_CCR_FS
-			    | CAMDMA_CCR_SYNCHRO_CAMERA);
-}
-
-static void omap24xxcam_dmahw_transfer_chain(void __iomem *base, int dmach,
-					     int free_dmach)
-{
-	int prev_dmach, ch;
-
-	if (dmach == 0)
-		prev_dmach = NUM_CAMDMA_CHANNELS - 1;
-	else
-		prev_dmach = dmach - 1;
-	omap24xxcam_reg_out(base, CAMDMA_CLNK_CTRL(prev_dmach),
-			    CAMDMA_CLNK_CTRL_ENABLE_LNK | dmach);
-	/* Did we chain the DMA transfer before the previous one
-	 * finished?
-	 */
-	ch = (dmach + free_dmach) % NUM_CAMDMA_CHANNELS;
-	while (!(omap24xxcam_reg_in(base, CAMDMA_CCR(ch))
-		 & CAMDMA_CCR_ENABLE)) {
-		if (ch == dmach) {
-			/* The previous transfer has ended and this one
-			 * hasn't started, so we must not have chained
-			 * to the previous one in time.  We'll have to
-			 * start it now.
-			 */
-			omap24xxcam_dmahw_transfer_start(base, dmach);
-			break;
-		} else
-			ch = (ch + 1) % NUM_CAMDMA_CHANNELS;
-	}
-}
-
-/* Abort all chained DMA transfers. After all transfers have been
- * aborted and the DMA controller is idle, the completion routines for
- * any aborted transfers will be called in sequence. The DMA
- * controller may not be idle after this routine completes, because
- * the completion routines might start new transfers.
- */
-static void omap24xxcam_dmahw_abort_ch(void __iomem *base, int dmach)
-{
-	/* mask all interrupts from this channel */
-	omap24xxcam_reg_out(base, CAMDMA_CICR(dmach), 0);
-	/* unlink this channel */
-	omap24xxcam_reg_merge(base, CAMDMA_CLNK_CTRL(dmach), 0,
-			      CAMDMA_CLNK_CTRL_ENABLE_LNK);
-	/* disable this channel */
-	omap24xxcam_reg_merge(base, CAMDMA_CCR(dmach), 0, CAMDMA_CCR_ENABLE);
-}
-
-static void omap24xxcam_dmahw_init(void __iomem *base)
-{
-	omap24xxcam_reg_out(base, CAMDMA_OCP_SYSCONFIG,
-			    CAMDMA_OCP_SYSCONFIG_MIDLEMODE_FSTANDBY
-			    | CAMDMA_OCP_SYSCONFIG_SIDLEMODE_FIDLE
-			    | CAMDMA_OCP_SYSCONFIG_AUTOIDLE);
-
-	omap24xxcam_reg_merge(base, CAMDMA_GCR, 0x10,
-			      CAMDMA_GCR_MAX_CHANNEL_FIFO_DEPTH);
-
-	omap24xxcam_reg_out(base, CAMDMA_IRQENABLE_L0, 0xf);
-}
-
-/*
- *
- * Individual DMA channel handling.
- *
- */
-
-/* Start a DMA transfer from the camera to memory.
- * Returns zero if the transfer was successfully started, or non-zero if all
- * DMA channels are already in use or starting is currently inhibited.
- */
-static int omap24xxcam_dma_start(struct omap24xxcam_dma *dma, dma_addr_t start,
-				 u32 len, dma_callback_t callback, void *arg)
-{
-	unsigned long flags;
-	int dmach;
-
-	spin_lock_irqsave(&dma->lock, flags);
-
-	if (!dma->free_dmach || atomic_read(&dma->dma_stop)) {
-		spin_unlock_irqrestore(&dma->lock, flags);
-		return -EBUSY;
-	}
-
-	dmach = dma->next_dmach;
-
-	dma->ch_state[dmach].callback = callback;
-	dma->ch_state[dmach].arg = arg;
-
-	omap24xxcam_dmahw_transfer_setup(dma->base, dmach, start, len);
-
-	/* We're ready to start the DMA transfer. */
-
-	if (dma->free_dmach < NUM_CAMDMA_CHANNELS) {
-		/* A transfer is already in progress, so try to chain to it. */
-		omap24xxcam_dmahw_transfer_chain(dma->base, dmach,
-						 dma->free_dmach);
-	} else {
-		/* No transfer is in progress, so we'll just start this one
-		 * now.
-		 */
-		omap24xxcam_dmahw_transfer_start(dma->base, dmach);
-	}
-
-	dma->next_dmach = (dma->next_dmach + 1) % NUM_CAMDMA_CHANNELS;
-	dma->free_dmach--;
-
-	spin_unlock_irqrestore(&dma->lock, flags);
-
-	return 0;
-}
-
-/* Abort all chained DMA transfers. After all transfers have been
- * aborted and the DMA controller is idle, the completion routines for
- * any aborted transfers will be called in sequence. The DMA
- * controller may not be idle after this routine completes, because
- * the completion routines might start new transfers.
- */
-static void omap24xxcam_dma_abort(struct omap24xxcam_dma *dma, u32 csr)
-{
-	unsigned long flags;
-	int dmach, i, free_dmach;
-	dma_callback_t callback;
-	void *arg;
-
-	spin_lock_irqsave(&dma->lock, flags);
-
-	/* stop any DMA transfers in progress */
-	dmach = (dma->next_dmach + dma->free_dmach) % NUM_CAMDMA_CHANNELS;
-	for (i = 0; i < NUM_CAMDMA_CHANNELS; i++) {
-		omap24xxcam_dmahw_abort_ch(dma->base, dmach);
-		dmach = (dmach + 1) % NUM_CAMDMA_CHANNELS;
-	}
-
-	/* We have to be careful here because the callback routine
-	 * might start a new DMA transfer, and we only want to abort
-	 * transfers that were started before this routine was called.
-	 */
-	free_dmach = dma->free_dmach;
-	while ((dma->free_dmach < NUM_CAMDMA_CHANNELS) &&
-	       (free_dmach < NUM_CAMDMA_CHANNELS)) {
-		dmach = (dma->next_dmach + dma->free_dmach)
-			% NUM_CAMDMA_CHANNELS;
-		callback = dma->ch_state[dmach].callback;
-		arg = dma->ch_state[dmach].arg;
-		dma->free_dmach++;
-		free_dmach++;
-		if (callback) {
-			/* leave interrupts disabled during callback */
-			spin_unlock(&dma->lock);
-			(*callback) (dma, csr, arg);
-			spin_lock(&dma->lock);
-		}
-	}
-
-	spin_unlock_irqrestore(&dma->lock, flags);
-}
-
-/* Abort all chained DMA transfers. After all transfers have been
- * aborted and the DMA controller is idle, the completion routines for
- * any aborted transfers will be called in sequence. If the completion
- * routines attempt to start a new DMA transfer it will fail, so the
- * DMA controller will be idle after this routine completes.
- */
-static void omap24xxcam_dma_stop(struct omap24xxcam_dma *dma, u32 csr)
-{
-	atomic_inc(&dma->dma_stop);
-	omap24xxcam_dma_abort(dma, csr);
-	atomic_dec(&dma->dma_stop);
-}
-
-/* Camera DMA interrupt service routine. */
-void omap24xxcam_dma_isr(struct omap24xxcam_dma *dma)
-{
-	int dmach;
-	dma_callback_t callback;
-	void *arg;
-	u32 csr;
-	const u32 csr_error = CAMDMA_CSR_MISALIGNED_ERR
-		| CAMDMA_CSR_SUPERVISOR_ERR | CAMDMA_CSR_SECURE_ERR
-		| CAMDMA_CSR_TRANS_ERR | CAMDMA_CSR_DROP;
-
-	spin_lock(&dma->lock);
-
-	if (dma->free_dmach == NUM_CAMDMA_CHANNELS) {
-		/* A camera DMA interrupt occurred while all channels
-		 * are idle, so we'll acknowledge the interrupt in the
-		 * IRQSTATUS register and exit.
-		 */
-		omap24xxcam_dmahw_ack_all(dma->base);
-		spin_unlock(&dma->lock);
-		return;
-	}
-
-	while (dma->free_dmach < NUM_CAMDMA_CHANNELS) {
-		dmach = (dma->next_dmach + dma->free_dmach)
-			% NUM_CAMDMA_CHANNELS;
-		if (omap24xxcam_dmahw_running(dma->base, dmach)) {
-			/* This buffer hasn't finished yet, so we're done. */
-			break;
-		}
-		csr = omap24xxcam_dmahw_ack_ch(dma->base, dmach);
-		if (csr & csr_error) {
-			/* A DMA error occurred, so stop all DMA
-			 * transfers in progress.
-			 */
-			spin_unlock(&dma->lock);
-			omap24xxcam_dma_stop(dma, csr);
-			return;
-		} else {
-			callback = dma->ch_state[dmach].callback;
-			arg = dma->ch_state[dmach].arg;
-			dma->free_dmach++;
-			if (callback) {
-				spin_unlock(&dma->lock);
-				(*callback) (dma, csr, arg);
-				spin_lock(&dma->lock);
-			}
-		}
-	}
-
-	spin_unlock(&dma->lock);
-
-	omap24xxcam_sgdma_process(
-		container_of(dma, struct omap24xxcam_sgdma, dma));
-}
-
-void omap24xxcam_dma_hwinit(struct omap24xxcam_dma *dma)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&dma->lock, flags);
-
-	omap24xxcam_dmahw_init(dma->base);
-
-	spin_unlock_irqrestore(&dma->lock, flags);
-}
-
-static void omap24xxcam_dma_init(struct omap24xxcam_dma *dma,
-				 void __iomem *base)
-{
-	int ch;
-
-	/* group all channels on DMA IRQ0 and unmask irq */
-	spin_lock_init(&dma->lock);
-	dma->base = base;
-	dma->free_dmach = NUM_CAMDMA_CHANNELS;
-	dma->next_dmach = 0;
-	for (ch = 0; ch < NUM_CAMDMA_CHANNELS; ch++) {
-		dma->ch_state[ch].callback = NULL;
-		dma->ch_state[ch].arg = NULL;
-	}
-}
-
-/*
- *
- * Scatter-gather DMA.
- *
- * High-level DMA construct for transferring whole picture frames to
- * memory that is discontinuous.
- *
- */
-
-/* DMA completion routine for the scatter-gather DMA fragments. */
-static void omap24xxcam_sgdma_callback(struct omap24xxcam_dma *dma, u32 csr,
-				       void *arg)
-{
-	struct omap24xxcam_sgdma *sgdma =
-		container_of(dma, struct omap24xxcam_sgdma, dma);
-	int sgslot = (int)arg;
-	struct sgdma_state *sg_state;
-	const u32 csr_error = CAMDMA_CSR_MISALIGNED_ERR
-		| CAMDMA_CSR_SUPERVISOR_ERR | CAMDMA_CSR_SECURE_ERR
-		| CAMDMA_CSR_TRANS_ERR | CAMDMA_CSR_DROP;
-
-	spin_lock(&sgdma->lock);
-
-	/* We got an interrupt, we can remove the timer */
-	del_timer(&sgdma->reset_timer);
-
-	sg_state = sgdma->sg_state + sgslot;
-	if (!sg_state->queued_sglist) {
-		spin_unlock(&sgdma->lock);
-		printk(KERN_ERR "%s: sgdma completed when none queued!\n",
-		       __func__);
-		return;
-	}
-
-	sg_state->csr |= csr;
-	if (!--sg_state->queued_sglist) {
-		/* Queue for this sglist is empty, so check to see if we're
-		 * done.
-		 */
-		if ((sg_state->next_sglist == sg_state->sglen)
-		    || (sg_state->csr & csr_error)) {
-			sgdma_callback_t callback = sg_state->callback;
-			void *arg = sg_state->arg;
-			u32 sg_csr = sg_state->csr;
-			/* All done with this sglist */
-			sgdma->free_sgdma++;
-			if (callback) {
-				spin_unlock(&sgdma->lock);
-				(*callback) (sgdma, sg_csr, arg);
-				return;
-			}
-		}
-	}
-
-	spin_unlock(&sgdma->lock);
-}
-
-/* Start queued scatter-gather DMA transfers. */
-void omap24xxcam_sgdma_process(struct omap24xxcam_sgdma *sgdma)
-{
-	unsigned long flags;
-	int queued_sgdma, sgslot;
-	struct sgdma_state *sg_state;
-	const u32 csr_error = CAMDMA_CSR_MISALIGNED_ERR
-		| CAMDMA_CSR_SUPERVISOR_ERR | CAMDMA_CSR_SECURE_ERR
-		| CAMDMA_CSR_TRANS_ERR | CAMDMA_CSR_DROP;
-
-	spin_lock_irqsave(&sgdma->lock, flags);
-
-	queued_sgdma = NUM_SG_DMA - sgdma->free_sgdma;
-	sgslot = (sgdma->next_sgdma + sgdma->free_sgdma) % NUM_SG_DMA;
-	while (queued_sgdma > 0) {
-		sg_state = sgdma->sg_state + sgslot;
-		while ((sg_state->next_sglist < sg_state->sglen) &&
-		       !(sg_state->csr & csr_error)) {
-			const struct scatterlist *sglist;
-			unsigned int len;
-
-			sglist = sg_state->sglist + sg_state->next_sglist;
-			/* try to start the next DMA transfer */
-			if (sg_state->next_sglist + 1 == sg_state->sglen) {
-				/*
-				 *  On the last sg, we handle the case where
-				 *  cam->img.pix.sizeimage % PAGE_ALIGN != 0
-				 */
-				len = sg_state->len - sg_state->bytes_read;
-			} else {
-				len = sg_dma_len(sglist);
-			}
-
-			if (omap24xxcam_dma_start(&sgdma->dma,
-						  sg_dma_address(sglist),
-						  len,
-						  omap24xxcam_sgdma_callback,
-						  (void *)sgslot)) {
-				/* DMA start failed */
-				spin_unlock_irqrestore(&sgdma->lock, flags);
-				return;
-			} else {
-				unsigned long expires;
-				/* DMA start was successful */
-				sg_state->next_sglist++;
-				sg_state->bytes_read += len;
-				sg_state->queued_sglist++;
-
-				/* We start the reset timer */
-				expires = jiffies + HZ;
-				mod_timer(&sgdma->reset_timer, expires);
-			}
-		}
-		queued_sgdma--;
-		sgslot = (sgslot + 1) % NUM_SG_DMA;
-	}
-
-	spin_unlock_irqrestore(&sgdma->lock, flags);
-}
-
-/*
- * Queue a scatter-gather DMA transfer from the camera to memory.
- * Returns zero if the transfer was successfully queued, or non-zero
- * if all of the scatter-gather slots are already in use.
- */
-int omap24xxcam_sgdma_queue(struct omap24xxcam_sgdma *sgdma,
-			    const struct scatterlist *sglist, int sglen,
-			    int len, sgdma_callback_t callback, void *arg)
-{
-	unsigned long flags;
-	struct sgdma_state *sg_state;
-
-	if ((sglen < 0) || ((sglen > 0) && !sglist))
-		return -EINVAL;
-
-	spin_lock_irqsave(&sgdma->lock, flags);
-
-	if (!sgdma->free_sgdma) {
-		spin_unlock_irqrestore(&sgdma->lock, flags);
-		return -EBUSY;
-	}
-
-	sg_state = sgdma->sg_state + sgdma->next_sgdma;
-
-	sg_state->sglist = sglist;
-	sg_state->sglen = sglen;
-	sg_state->next_sglist = 0;
-	sg_state->bytes_read = 0;
-	sg_state->len = len;
-	sg_state->queued_sglist = 0;
-	sg_state->csr = 0;
-	sg_state->callback = callback;
-	sg_state->arg = arg;
-
-	sgdma->next_sgdma = (sgdma->next_sgdma + 1) % NUM_SG_DMA;
-	sgdma->free_sgdma--;
-
-	spin_unlock_irqrestore(&sgdma->lock, flags);
-
-	omap24xxcam_sgdma_process(sgdma);
-
-	return 0;
-}
-
-/* Sync scatter-gather DMA by aborting any DMA transfers currently in progress.
- * Any queued scatter-gather DMA transactions that have not yet been started
- * will remain queued.  The DMA controller will be idle after this routine
- * completes.  When the scatter-gather queue is restarted, the next
- * scatter-gather DMA transfer will begin at the start of a new transaction.
- */
-void omap24xxcam_sgdma_sync(struct omap24xxcam_sgdma *sgdma)
-{
-	unsigned long flags;
-	int sgslot;
-	struct sgdma_state *sg_state;
-	u32 csr = CAMDMA_CSR_TRANS_ERR;
-
-	/* stop any DMA transfers in progress */
-	omap24xxcam_dma_stop(&sgdma->dma, csr);
-
-	spin_lock_irqsave(&sgdma->lock, flags);
-
-	if (sgdma->free_sgdma < NUM_SG_DMA) {
-		sgslot = (sgdma->next_sgdma + sgdma->free_sgdma) % NUM_SG_DMA;
-		sg_state = sgdma->sg_state + sgslot;
-		if (sg_state->next_sglist != 0) {
-			/* This DMA transfer was in progress, so abort it. */
-			sgdma_callback_t callback = sg_state->callback;
-			void *arg = sg_state->arg;
-			sgdma->free_sgdma++;
-			if (callback) {
-				/* leave interrupts masked */
-				spin_unlock(&sgdma->lock);
-				(*callback) (sgdma, csr, arg);
-				spin_lock(&sgdma->lock);
-			}
-		}
-	}
-
-	spin_unlock_irqrestore(&sgdma->lock, flags);
-}
-
-void omap24xxcam_sgdma_init(struct omap24xxcam_sgdma *sgdma,
-			    void __iomem *base,
-			    void (*reset_callback)(unsigned long data),
-			    unsigned long reset_callback_data)
-{
-	int sg;
-
-	spin_lock_init(&sgdma->lock);
-	sgdma->free_sgdma = NUM_SG_DMA;
-	sgdma->next_sgdma = 0;
-	for (sg = 0; sg < NUM_SG_DMA; sg++) {
-		sgdma->sg_state[sg].sglen = 0;
-		sgdma->sg_state[sg].next_sglist = 0;
-		sgdma->sg_state[sg].bytes_read = 0;
-		sgdma->sg_state[sg].queued_sglist = 0;
-		sgdma->sg_state[sg].csr = 0;
-		sgdma->sg_state[sg].callback = NULL;
-		sgdma->sg_state[sg].arg = NULL;
-	}
-
-	omap24xxcam_dma_init(&sgdma->dma, base);
-	setup_timer(&sgdma->reset_timer, reset_callback, reset_callback_data);
-}