Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 "The first part of the media updates for Kernel 3.7.

  This series contain:

   - A major tree renaming patch series: now, drivers are organized
     internally by their used bus, instead of by V4L2 and/or DVB API,
     providing a cleaner driver location for hybrid drivers that
     implement both APIs, and allowing to cleanup the Kconfig items and
     make them more intuitive for the end user;

   - Media Kernel developers are typically very lazy with their duties
     of keeping the MAINTAINERS entries for their drivers updated.  As
     now the tree is more organized, we're doing an effort to add/update
     those entries for the drivers that aren't currently orphan;

   - Several DVB USB drivers got moved to a new DVB USB v2 core; the new
     core fixes several bugs (as the existing one that got bitroted).
     Now, suspend/resume finally started to work fine (at least with
     some devices - we should expect more work with regards to it);

   - added multistream support for DVB-T2, and unified the API for
     DVB-S2 and ISDB-S.  Backward binary support is preserved;

   - as usual, a few new drivers, some V4L2 core improvements and lots
     of drivers improvements and fixes.

  There are some points to notice on this series:

   1) you should expect a trivial merge conflict on your tree, with the
      removal of Documentation/feature-removal-schedule.txt: this series
      would be adding two additional entries there.  I opted to not
      rebase it due to this recent change;

   2) With regards to the PCTV 520e udev-related breakage, I opted to
      fix it in a way that the patches can be backported to 3.5 even
      without your firmware fix patch.  This way, Greg doesn't need to
      rush backporting your patch (as there are still the firmware cache
      and firmware path customization issues to be addressed there).

      I'll send later a patch (likely after the end of the merge window)
      reverting the rest of the DRX-K async firmware request, fully
      restoring its original behaviour to allow media drivers to
      initialize everything serialized as before for 3.7 and upper.

   3) I'm planning to work on this weekend to test the DMABUF patches
      for V4L2.  The patches are on my queue for several Kernel cycles,
      but, up to now, there is/was no way to test the series locally.

      I have some concerns about this particular changeset with regards
      to security issues, and with regards to the replacement of the old
      VIDIOC_OVERLAY ioctl's that is broken on modern systems, due to
      GPU drivers change.  The Overlay API allows direct PCI2PCI
      transfers from a media capture card into the GPU framebuffer, but
      its API is crappy.  Also, the only existing X11 driver that
      implements it requires a XV extension that is not available
      anymore on modern drivers.  The DMABUF can do the same thing, but
      with it is promising to be a properly-designed API.  If I can
      successfully test this series and be happy with it, I should be
      asking you to pull them next week."

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (717 commits)
  em28xx: regression fix: use DRX-K sync firmware requests on em28xx
  drxk: allow loading firmware synchrousnously
  em28xx: Make all em28xx extensions to be initialized asynchronously
  [media] tda18271: properly report read errors in tda18271_get_id
  [media] tda18271: delay IR & RF calibration until init() if delay_cal is set
  [media] MAINTAINERS: add Michael Krufky as tda827x maintainer
  [media] MAINTAINERS: add Michael Krufky as tda8290 maintainer
  [media] MAINTAINERS: add Michael Krufky as cxusb maintainer
  [media] MAINTAINERS: add Michael Krufky as lg2160 maintainer
  [media] MAINTAINERS: add Michael Krufky as lgdt3305 maintainer
  [media] MAINTAINERS: add Michael Krufky as mxl111sf maintainer
  [media] MAINTAINERS: add Michael Krufky as mxl5007t maintainer
  [media] MAINTAINERS: add Michael Krufky as tda18271 maintainer
  [media] s5p-tv: Report only multi-plane capabilities in vidioc_querycap
  [media] s5p-mfc: Fix misplaced return statement in s5p_mfc_suspend()
  [media] exynos-gsc: Add missing static storage class specifiers
  [media] exynos-gsc: Remove <linux/version.h> header file inclusion
  [media] s5p-fimc: Fix incorrect condition in fimc_lite_reqbufs()
  [media] s5p-tv: Fix potential NULL pointer dereference error
  [media] s5k6aa: Fix possible NULL pointer dereference
  ...

32 files changed, 15604 insertions, 0 deletions

diff --git a/drivers/media/pci/cx23885/Kconfig b/drivers/media/pci/cx23885/Kconfig
new file mode 100644
index 0000000..eafa114
--- /dev/null
+++ b/drivers/media/pci/cx23885/Kconfig
@@ -0,0 +1,50 @@
+config VIDEO_CX23885
+	tristate "Conexant cx23885 (2388x successor) support"
+	depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT && SND
+	select SND_PCM
+	select I2C_ALGOBIT
+	select VIDEO_BTCX
+	select VIDEO_TUNER
+	select VIDEO_TVEEPROM
+	depends on RC_CORE
+	select VIDEOBUF_DVB
+	select VIDEOBUF_DMA_SG
+	select VIDEO_CX25840
+	select VIDEO_CX2341X
+	select DVB_DIB7000P if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_S5H1409 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0367 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MT2063 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_MT2131 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT
+	---help---
+	  This is a video4linux driver for Conexant 23885 based
+	  TV cards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cx23885
+
+config MEDIA_ALTERA_CI
+	tristate "Altera FPGA based CI module"
+	depends on VIDEO_CX23885 && DVB_CORE
+	select ALTERA_STAPL
+	---help---
+	  An Altera FPGA CI module for NetUP Dual DVB-T/C RF CI card.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called altera-ci
diff --git a/drivers/media/pci/cx23885/Makefile b/drivers/media/pci/cx23885/Makefile
new file mode 100644
index 0000000..a2cbdcf
--- /dev/null
+++ b/drivers/media/pci/cx23885/Makefile
@@ -0,0 +1,15 @@
+cx23885-objs	:= cx23885-cards.o cx23885-video.o cx23885-vbi.o \
+		    cx23885-core.o cx23885-i2c.o cx23885-dvb.o cx23885-417.o \
+		    cx23885-ioctl.o cx23885-ir.o cx23885-av.o cx23885-input.o \
+		    cx23888-ir.o netup-init.o cimax2.o netup-eeprom.o \
+		    cx23885-f300.o cx23885-alsa.o
+
+obj-$(CONFIG_VIDEO_CX23885) += cx23885.o
+obj-$(CONFIG_MEDIA_ALTERA_CI) += altera-ci.o
+
+ccflags-y += -Idrivers/media/i2c
+ccflags-y += -Idrivers/media/tuners
+ccflags-y += -Idrivers/media/dvb-core
+ccflags-y += -Idrivers/media/dvb-frontends
+
+ccflags-y += $(extra-cflags-y) $(extra-cflags-m)
diff --git a/drivers/media/pci/cx23885/altera-ci.c b/drivers/media/pci/cx23885/altera-ci.c
new file mode 100644
index 0000000..aee7f0d
--- /dev/null
+++ b/drivers/media/pci/cx23885/altera-ci.c
@@ -0,0 +1,839 @@
+/*
+ * altera-ci.c
+ *
+ *  CI driver in conjunction with NetUp Dual DVB-T/C RF CI card
+ *
+ * Copyright (C) 2010,2011 NetUP Inc.
+ * Copyright (C) 2010,2011 Igor M. Liplianin <liplianin@netup.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * currently cx23885 GPIO's used.
+ * GPIO-0 ~INT in
+ * GPIO-1 TMS out
+ * GPIO-2 ~reset chips out
+ * GPIO-3 to GPIO-10 data/addr for CA in/out
+ * GPIO-11 ~CS out
+ * GPIO-12 AD_RG out
+ * GPIO-13 ~WR out
+ * GPIO-14 ~RD out
+ * GPIO-15 ~RDY in
+ * GPIO-16 TCK out
+ * GPIO-17 TDO in
+ * GPIO-18 TDI out
+ */
+/*
+ *  Bit definitions for MC417_RWD and MC417_OEN registers
+ * bits 31-16
+ * +-----------+
+ * | Reserved  |
+ * +-----------+
+ *   bit 15  bit 14  bit 13 bit 12  bit 11  bit 10  bit 9   bit 8
+ * +-------+-------+-------+-------+-------+-------+-------+-------+
+ * |  TDI  |  TDO  |  TCK  |  RDY# |  #RD  |  #WR  | AD_RG |  #CS  |
+ * +-------+-------+-------+-------+-------+-------+-------+-------+
+ *  bit 7   bit 6   bit 5   bit 4   bit 3   bit 2   bit 1   bit 0
+ * +-------+-------+-------+-------+-------+-------+-------+-------+
+ * |  DATA7|  DATA6|  DATA5|  DATA4|  DATA3|  DATA2|  DATA1|  DATA0|
+ * +-------+-------+-------+-------+-------+-------+-------+-------+
+ */
+#include <media/videobuf-dma-sg.h>
+#include <media/videobuf-dvb.h>
+#include "altera-ci.h"
+#include "dvb_ca_en50221.h"
+
+/* FPGA regs */
+#define NETUP_CI_INT_CTRL	0x00
+#define NETUP_CI_BUSCTRL2	0x01
+#define NETUP_CI_ADDR0		0x04
+#define NETUP_CI_ADDR1		0x05
+#define NETUP_CI_DATA		0x06
+#define NETUP_CI_BUSCTRL	0x07
+#define NETUP_CI_PID_ADDR0	0x08
+#define NETUP_CI_PID_ADDR1	0x09
+#define NETUP_CI_PID_DATA	0x0a
+#define NETUP_CI_TSA_DIV	0x0c
+#define NETUP_CI_TSB_DIV	0x0d
+#define NETUP_CI_REVISION	0x0f
+
+/* const for ci op */
+#define NETUP_CI_FLG_CTL	1
+#define NETUP_CI_FLG_RD		1
+#define NETUP_CI_FLG_AD		1
+
+static unsigned int ci_dbg;
+module_param(ci_dbg, int, 0644);
+MODULE_PARM_DESC(ci_dbg, "Enable CI debugging");
+
+static unsigned int pid_dbg;
+module_param(pid_dbg, int, 0644);
+MODULE_PARM_DESC(pid_dbg, "Enable PID filtering debugging");
+
+MODULE_DESCRIPTION("altera FPGA CI module");
+MODULE_AUTHOR("Igor M. Liplianin  <liplianin@netup.ru>");
+MODULE_LICENSE("GPL");
+
+#define ci_dbg_print(args...) \
+	do { \
+		if (ci_dbg) \
+			printk(KERN_DEBUG args); \
+	} while (0)
+
+#define pid_dbg_print(args...) \
+	do { \
+		if (pid_dbg) \
+			printk(KERN_DEBUG args); \
+	} while (0)
+
+struct altera_ci_state;
+struct netup_hw_pid_filter;
+
+struct fpga_internal {
+	void *dev;
+	struct mutex fpga_mutex;/* two CI's on the same fpga */
+	struct netup_hw_pid_filter *pid_filt[2];
+	struct altera_ci_state *state[2];
+	struct work_struct work;
+	int (*fpga_rw) (void *dev, int flag, int data, int rw);
+	int cis_used;
+	int filts_used;
+	int strt_wrk;
+};
+
+/* stores all private variables for communication with CI */
+struct altera_ci_state {
+	struct fpga_internal *internal;
+	struct dvb_ca_en50221 ca;
+	int status;
+	int nr;
+};
+
+/* stores all private variables for hardware pid filtering */
+struct netup_hw_pid_filter {
+	struct fpga_internal *internal;
+	struct dvb_demux *demux;
+	/* save old functions */
+	int (*start_feed)(struct dvb_demux_feed *feed);
+	int (*stop_feed)(struct dvb_demux_feed *feed);
+
+	int status;
+	int nr;
+};
+
+/* internal params node */
+struct fpga_inode {
+	/* pointer for internal params, one for each pair of CI's */
+	struct fpga_internal		*internal;
+	struct fpga_inode		*next_inode;
+};
+
+/* first internal params */
+static struct fpga_inode *fpga_first_inode;
+
+/* find chip by dev */
+static struct fpga_inode *find_inode(void *dev)
+{
+	struct fpga_inode *temp_chip = fpga_first_inode;
+
+	if (temp_chip == NULL)
+		return temp_chip;
+
+	/*
+	 Search for the last fpga CI chip or
+	 find it by dev */
+	while ((temp_chip != NULL) &&
+				(temp_chip->internal->dev != dev))
+		temp_chip = temp_chip->next_inode;
+
+	return temp_chip;
+}
+/* check demux */
+static struct fpga_internal *check_filter(struct fpga_internal *temp_int,
+						void *demux_dev, int filt_nr)
+{
+	if (temp_int == NULL)
+		return NULL;
+
+	if ((temp_int->pid_filt[filt_nr]) == NULL)
+		return NULL;
+
+	if (temp_int->pid_filt[filt_nr]->demux == demux_dev)
+		return temp_int;
+
+	return NULL;
+}
+
+/* find chip by demux */
+static struct fpga_inode *find_dinode(void *demux_dev)
+{
+	struct fpga_inode *temp_chip = fpga_first_inode;
+	struct fpga_internal *temp_int;
+
+	/*
+	 * Search of the last fpga CI chip or
+	 * find it by demux
+	 */
+	while (temp_chip != NULL) {
+		if (temp_chip->internal != NULL) {
+			temp_int = temp_chip->internal;
+			if (check_filter(temp_int, demux_dev, 0))
+				break;
+			if (check_filter(temp_int, demux_dev, 1))
+				break;
+		}
+
+		temp_chip = temp_chip->next_inode;
+	}
+
+	return temp_chip;
+}
+
+/* deallocating chip */
+static void remove_inode(struct fpga_internal *internal)
+{
+	struct fpga_inode *prev_node = fpga_first_inode;
+	struct fpga_inode *del_node = find_inode(internal->dev);
+
+	if (del_node != NULL) {
+		if (del_node == fpga_first_inode) {
+			fpga_first_inode = del_node->next_inode;
+		} else {
+			while (prev_node->next_inode != del_node)
+				prev_node = prev_node->next_inode;
+
+			if (del_node->next_inode == NULL)
+				prev_node->next_inode = NULL;
+			else
+				prev_node->next_inode =
+					prev_node->next_inode->next_inode;
+		}
+
+		kfree(del_node);
+	}
+}
+
+/* allocating new chip */
+static struct fpga_inode *append_internal(struct fpga_internal *internal)
+{
+	struct fpga_inode *new_node = fpga_first_inode;
+
+	if (new_node == NULL) {
+		new_node = kmalloc(sizeof(struct fpga_inode), GFP_KERNEL);
+		fpga_first_inode = new_node;
+	} else {
+		while (new_node->next_inode != NULL)
+			new_node = new_node->next_inode;
+
+		new_node->next_inode =
+				kmalloc(sizeof(struct fpga_inode), GFP_KERNEL);
+		if (new_node->next_inode != NULL)
+			new_node = new_node->next_inode;
+		else
+			new_node = NULL;
+	}
+
+	if (new_node != NULL) {
+		new_node->internal = internal;
+		new_node->next_inode = NULL;
+	}
+
+	return new_node;
+}
+
+static int netup_fpga_op_rw(struct fpga_internal *inter, int addr,
+							u8 val, u8 read)
+{
+	inter->fpga_rw(inter->dev, NETUP_CI_FLG_AD, addr, 0);
+	return inter->fpga_rw(inter->dev, 0, val, read);
+}
+
+/* flag - mem/io, read - read/write */
+int altera_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot,
+				u8 flag, u8 read, int addr, u8 val)
+{
+
+	struct altera_ci_state *state = en50221->data;
+	struct fpga_internal *inter = state->internal;
+
+	u8 store;
+	int mem = 0;
+
+	if (0 != slot)
+		return -EINVAL;
+
+	mutex_lock(&inter->fpga_mutex);
+
+	netup_fpga_op_rw(inter, NETUP_CI_ADDR0, ((addr << 1) & 0xfe), 0);
+	netup_fpga_op_rw(inter, NETUP_CI_ADDR1, ((addr >> 7) & 0x7f), 0);
+	store = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD);
+
+	store &= 0x0f;
+	store |= ((state->nr << 7) | (flag << 6));
+
+	netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, store, 0);
+	mem = netup_fpga_op_rw(inter, NETUP_CI_DATA, val, read);
+
+	mutex_unlock(&inter->fpga_mutex);
+
+	ci_dbg_print("%s: %s: addr=[0x%02x], %s=%x\n", __func__,
+			(read) ? "read" : "write", addr,
+			(flag == NETUP_CI_FLG_CTL) ? "ctl" : "mem",
+			(read) ? mem : val);
+
+	return mem;
+}
+
+int altera_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221,
+						int slot, int addr)
+{
+	return altera_ci_op_cam(en50221, slot, 0, NETUP_CI_FLG_RD, addr, 0);
+}
+
+int altera_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221,
+						int slot, int addr, u8 data)
+{
+	return altera_ci_op_cam(en50221, slot, 0, 0, addr, data);
+}
+
+int altera_ci_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr)
+{
+	return altera_ci_op_cam(en50221, slot, NETUP_CI_FLG_CTL,
+						NETUP_CI_FLG_RD, addr, 0);
+}
+
+int altera_ci_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot,
+						u8 addr, u8 data)
+{
+	return altera_ci_op_cam(en50221, slot, NETUP_CI_FLG_CTL, 0, addr, data);
+}
+
+int altera_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot)
+{
+	struct altera_ci_state *state = en50221->data;
+	struct fpga_internal *inter = state->internal;
+	/* reasonable timeout for CI reset is 10 seconds */
+	unsigned long t_out = jiffies + msecs_to_jiffies(9999);
+	int ret;
+
+	ci_dbg_print("%s\n", __func__);
+
+	if (0 != slot)
+		return -EINVAL;
+
+	mutex_lock(&inter->fpga_mutex);
+
+	ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD);
+	netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL,
+				(ret & 0xcf) | (1 << (5 - state->nr)), 0);
+
+	mutex_unlock(&inter->fpga_mutex);
+
+	for (;;) {
+		mdelay(50);
+
+		mutex_lock(&inter->fpga_mutex);
+
+		ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL,
+						0, NETUP_CI_FLG_RD);
+		mutex_unlock(&inter->fpga_mutex);
+
+		if ((ret & (1 << (5 - state->nr))) == 0)
+			break;
+		if (time_after(jiffies, t_out))
+			break;
+	}
+
+
+	ci_dbg_print("%s: %d msecs\n", __func__,
+		jiffies_to_msecs(jiffies + msecs_to_jiffies(9999) - t_out));
+
+	return 0;
+}
+
+int altera_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot)
+{
+	/* not implemented */
+	return 0;
+}
+
+int altera_ci_slot_ts_ctl(struct dvb_ca_en50221 *en50221, int slot)
+{
+	struct altera_ci_state *state = en50221->data;
+	struct fpga_internal *inter = state->internal;
+	int ret;
+
+	ci_dbg_print("%s\n", __func__);
+
+	if (0 != slot)
+		return -EINVAL;
+
+	mutex_lock(&inter->fpga_mutex);
+
+	ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD);
+	netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL,
+				(ret & 0x0f) | (1 << (3 - state->nr)), 0);
+
+	mutex_unlock(&inter->fpga_mutex);
+
+	return 0;
+}
+
+/* work handler */
+static void netup_read_ci_status(struct work_struct *work)
+{
+	struct fpga_internal *inter =
+			container_of(work, struct fpga_internal, work);
+	int ret;
+
+	ci_dbg_print("%s\n", __func__);
+
+	mutex_lock(&inter->fpga_mutex);
+	/* ack' irq */
+	ret = netup_fpga_op_rw(inter, NETUP_CI_INT_CTRL, 0, NETUP_CI_FLG_RD);
+	ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD);
+
+	mutex_unlock(&inter->fpga_mutex);
+
+	if (inter->state[1] != NULL) {
+		inter->state[1]->status =
+				((ret & 1) == 0 ?
+				DVB_CA_EN50221_POLL_CAM_PRESENT |
+				DVB_CA_EN50221_POLL_CAM_READY : 0);
+		ci_dbg_print("%s: setting CI[1] status = 0x%x\n",
+				__func__, inter->state[1]->status);
+	};
+
+	if (inter->state[0] != NULL) {
+		inter->state[0]->status =
+				((ret & 2) == 0 ?
+				DVB_CA_EN50221_POLL_CAM_PRESENT |
+				DVB_CA_EN50221_POLL_CAM_READY : 0);
+		ci_dbg_print("%s: setting CI[0] status = 0x%x\n",
+				__func__, inter->state[0]->status);
+	};
+}
+
+/* CI irq handler */
+int altera_ci_irq(void *dev)
+{
+	struct fpga_inode *temp_int = NULL;
+	struct fpga_internal *inter = NULL;
+
+	ci_dbg_print("%s\n", __func__);
+
+	if (dev != NULL) {
+		temp_int = find_inode(dev);
+		if (temp_int != NULL) {
+			inter = temp_int->internal;
+			schedule_work(&inter->work);
+		}
+	}
+
+	return 1;
+}
+EXPORT_SYMBOL(altera_ci_irq);
+
+int altera_poll_ci_slot_status(struct dvb_ca_en50221 *en50221, int slot,
+								int open)
+{
+	struct altera_ci_state *state = en50221->data;
+
+	if (0 != slot)
+		return -EINVAL;
+
+	return state->status;
+}
+
+void altera_hw_filt_release(void *main_dev, int filt_nr)
+{
+	struct fpga_inode *temp_int = find_inode(main_dev);
+	struct netup_hw_pid_filter *pid_filt = NULL;
+
+	ci_dbg_print("%s\n", __func__);
+
+	if (temp_int != NULL) {
+		pid_filt = temp_int->internal->pid_filt[filt_nr - 1];
+		/* stored old feed controls */
+		pid_filt->demux->start_feed = pid_filt->start_feed;
+		pid_filt->demux->stop_feed = pid_filt->stop_feed;
+
+		if (((--(temp_int->internal->filts_used)) <= 0) &&
+			 ((temp_int->internal->cis_used) <= 0)) {
+
+			ci_dbg_print("%s: Actually removing\n", __func__);
+
+			remove_inode(temp_int->internal);
+			kfree(pid_filt->internal);
+		}
+
+		kfree(pid_filt);
+
+	}
+
+}
+EXPORT_SYMBOL(altera_hw_filt_release);
+
+void altera_ci_release(void *dev, int ci_nr)
+{
+	struct fpga_inode *temp_int = find_inode(dev);
+	struct altera_ci_state *state = NULL;
+
+	ci_dbg_print("%s\n", __func__);
+
+	if (temp_int != NULL) {
+		state = temp_int->internal->state[ci_nr - 1];
+		altera_hw_filt_release(dev, ci_nr);
+
+
+		if (((temp_int->internal->filts_used) <= 0) &&
+				((--(temp_int->internal->cis_used)) <= 0)) {
+
+			ci_dbg_print("%s: Actually removing\n", __func__);
+
+			remove_inode(temp_int->internal);
+			kfree(state->internal);
+		}
+
+		if (state != NULL) {
+			if (state->ca.data != NULL)
+				dvb_ca_en50221_release(&state->ca);
+
+			kfree(state);
+		}
+	}
+
+}
+EXPORT_SYMBOL(altera_ci_release);
+
+static void altera_pid_control(struct netup_hw_pid_filter *pid_filt,
+		u16 pid, int onoff)
+{
+	struct fpga_internal *inter = pid_filt->internal;
+	u8 store = 0;
+
+	/* pid 0-0x1f always enabled, don't touch them */
+	if ((pid == 0x2000) || (pid < 0x20))
+		return;
+
+	mutex_lock(&inter->fpga_mutex);
+
+	netup_fpga_op_rw(inter, NETUP_CI_PID_ADDR0, (pid >> 3) & 0xff, 0);
+	netup_fpga_op_rw(inter, NETUP_CI_PID_ADDR1,
+			((pid >> 11) & 0x03) | (pid_filt->nr << 2), 0);
+
+	store = netup_fpga_op_rw(inter, NETUP_CI_PID_DATA, 0, NETUP_CI_FLG_RD);
+
+	if (onoff)/* 0 - on, 1 - off */
+		store |= (1 << (pid & 7));
+	else
+		store &= ~(1 << (pid & 7));
+
+	netup_fpga_op_rw(inter, NETUP_CI_PID_DATA, store, 0);
+
+	mutex_unlock(&inter->fpga_mutex);
+
+	pid_dbg_print("%s: (%d) set pid: %5d 0x%04x '%s'\n", __func__,
+		pid_filt->nr, pid, pid, onoff ? "off" : "on");
+}
+
+static void altera_toggle_fullts_streaming(struct netup_hw_pid_filter *pid_filt,
+					int filt_nr, int onoff)
+{
+	struct fpga_internal *inter = pid_filt->internal;
+	u8 store = 0;
+	int i;
+
+	pid_dbg_print("%s: pid_filt->nr[%d]  now %s\n", __func__, pid_filt->nr,
+			onoff ? "off" : "on");
+
+	if (onoff)/* 0 - on, 1 - off */
+		store = 0xff;/* ignore pid */
+	else
+		store = 0;/* enable pid */
+
+	mutex_lock(&inter->fpga_mutex);
+
+	for (i = 0; i < 1024; i++) {
+		netup_fpga_op_rw(inter, NETUP_CI_PID_ADDR0, i & 0xff, 0);
+
+		netup_fpga_op_rw(inter, NETUP_CI_PID_ADDR1,
+				((i >> 8) & 0x03) | (pid_filt->nr << 2), 0);
+		/* pid 0-0x1f always enabled */
+		netup_fpga_op_rw(inter, NETUP_CI_PID_DATA,
+				(i > 3 ? store : 0), 0);
+	}
+
+	mutex_unlock(&inter->fpga_mutex);
+}
+
+int altera_pid_feed_control(void *demux_dev, int filt_nr,
+		struct dvb_demux_feed *feed, int onoff)
+{
+	struct fpga_inode *temp_int = find_dinode(demux_dev);
+	struct fpga_internal *inter = temp_int->internal;
+	struct netup_hw_pid_filter *pid_filt = inter->pid_filt[filt_nr - 1];
+
+	altera_pid_control(pid_filt, feed->pid, onoff ? 0 : 1);
+	/* call old feed proc's */
+	if (onoff)
+		pid_filt->start_feed(feed);
+	else
+		pid_filt->stop_feed(feed);
+
+	if (feed->pid == 0x2000)
+		altera_toggle_fullts_streaming(pid_filt, filt_nr,
+						onoff ? 0 : 1);
+
+	return 0;
+}
+EXPORT_SYMBOL(altera_pid_feed_control);
+
+int altera_ci_start_feed(struct dvb_demux_feed *feed, int num)
+{
+	altera_pid_feed_control(feed->demux, num, feed, 1);
+
+	return 0;
+}
+
+int altera_ci_stop_feed(struct dvb_demux_feed *feed, int num)
+{
+	altera_pid_feed_control(feed->demux, num, feed, 0);
+
+	return 0;
+}
+
+int altera_ci_start_feed_1(struct dvb_demux_feed *feed)
+{
+	return altera_ci_start_feed(feed, 1);
+}
+
+int altera_ci_stop_feed_1(struct dvb_demux_feed *feed)
+{
+	return altera_ci_stop_feed(feed, 1);
+}
+
+int altera_ci_start_feed_2(struct dvb_demux_feed *feed)
+{
+	return altera_ci_start_feed(feed, 2);
+}
+
+int altera_ci_stop_feed_2(struct dvb_demux_feed *feed)
+{
+	return altera_ci_stop_feed(feed, 2);
+}
+
+int altera_hw_filt_init(struct altera_ci_config *config, int hw_filt_nr)
+{
+	struct netup_hw_pid_filter *pid_filt = NULL;
+	struct fpga_inode *temp_int = find_inode(config->dev);
+	struct fpga_internal *inter = NULL;
+	int ret = 0;
+
+	pid_filt = kzalloc(sizeof(struct netup_hw_pid_filter), GFP_KERNEL);
+
+	ci_dbg_print("%s\n", __func__);
+
+	if (!pid_filt) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	if (temp_int != NULL) {
+		inter = temp_int->internal;
+		(inter->filts_used)++;
+		ci_dbg_print("%s: Find Internal Structure!\n", __func__);
+	} else {
+		inter = kzalloc(sizeof(struct fpga_internal), GFP_KERNEL);
+		if (!inter) {
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		temp_int = append_internal(inter);
+		inter->filts_used = 1;
+		inter->dev = config->dev;
+		inter->fpga_rw = config->fpga_rw;
+		mutex_init(&inter->fpga_mutex);
+		inter->strt_wrk = 1;
+		ci_dbg_print("%s: Create New Internal Structure!\n", __func__);
+	}
+
+	ci_dbg_print("%s: setting hw pid filter = %p for ci = %d\n", __func__,
+						pid_filt, hw_filt_nr - 1);
+	inter->pid_filt[hw_filt_nr - 1] = pid_filt;
+	pid_filt->demux = config->demux;
+	pid_filt->internal = inter;
+	pid_filt->nr = hw_filt_nr - 1;
+	/* store old feed controls */
+	pid_filt->start_feed = config->demux->start_feed;
+	pid_filt->stop_feed = config->demux->stop_feed;
+	/* replace with new feed controls */
+	if (hw_filt_nr == 1) {
+		pid_filt->demux->start_feed = altera_ci_start_feed_1;
+		pid_filt->demux->stop_feed = altera_ci_stop_feed_1;
+	} else if (hw_filt_nr == 2) {
+		pid_filt->demux->start_feed = altera_ci_start_feed_2;
+		pid_filt->demux->stop_feed = altera_ci_stop_feed_2;
+	}
+
+	altera_toggle_fullts_streaming(pid_filt, 0, 1);
+
+	return 0;
+err:
+	ci_dbg_print("%s: Can't init hardware filter: Error %d\n",
+		     __func__, ret);
+
+	kfree(pid_filt);
+
+	return ret;
+}
+EXPORT_SYMBOL(altera_hw_filt_init);
+
+int altera_ci_init(struct altera_ci_config *config, int ci_nr)
+{
+	struct altera_ci_state *state;
+	struct fpga_inode *temp_int = find_inode(config->dev);
+	struct fpga_internal *inter = NULL;
+	int ret = 0;
+	u8 store = 0;
+
+	state = kzalloc(sizeof(struct altera_ci_state), GFP_KERNEL);
+
+	ci_dbg_print("%s\n", __func__);
+
+	if (!state) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	if (temp_int != NULL) {
+		inter = temp_int->internal;
+		(inter->cis_used)++;
+                inter->fpga_rw = config->fpga_rw;
+		ci_dbg_print("%s: Find Internal Structure!\n", __func__);
+	} else {
+		inter = kzalloc(sizeof(struct fpga_internal), GFP_KERNEL);
+		if (!inter) {
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		temp_int = append_internal(inter);
+		inter->cis_used = 1;
+		inter->dev = config->dev;
+		inter->fpga_rw = config->fpga_rw;
+		mutex_init(&inter->fpga_mutex);
+		inter->strt_wrk = 1;
+		ci_dbg_print("%s: Create New Internal Structure!\n", __func__);
+	}
+
+	ci_dbg_print("%s: setting state = %p for ci = %d\n", __func__,
+						state, ci_nr - 1);
+	state->internal = inter;
+	state->nr = ci_nr - 1;
+
+	state->ca.owner = THIS_MODULE;
+	state->ca.read_attribute_mem = altera_ci_read_attribute_mem;
+	state->ca.write_attribute_mem = altera_ci_write_attribute_mem;
+	state->ca.read_cam_control = altera_ci_read_cam_ctl;
+	state->ca.write_cam_control = altera_ci_write_cam_ctl;
+	state->ca.slot_reset = altera_ci_slot_reset;
+	state->ca.slot_shutdown = altera_ci_slot_shutdown;
+	state->ca.slot_ts_enable = altera_ci_slot_ts_ctl;
+	state->ca.poll_slot_status = altera_poll_ci_slot_status;
+	state->ca.data = state;
+
+	ret = dvb_ca_en50221_init(config->adapter,
+				   &state->ca,
+				   /* flags */ 0,
+				   /* n_slots */ 1);
+	if (0 != ret)
+		goto err;
+
+       inter->state[ci_nr - 1] = state;
+
+	altera_hw_filt_init(config, ci_nr);
+
+	if (inter->strt_wrk) {
+		INIT_WORK(&inter->work, netup_read_ci_status);
+		inter->strt_wrk = 0;
+	}
+
+	ci_dbg_print("%s: CI initialized!\n", __func__);
+
+	mutex_lock(&inter->fpga_mutex);
+
+	/* Enable div */
+	netup_fpga_op_rw(inter, NETUP_CI_TSA_DIV, 0x0, 0);
+	netup_fpga_op_rw(inter, NETUP_CI_TSB_DIV, 0x0, 0);
+
+	/* enable TS out */
+	store = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, 0, NETUP_CI_FLG_RD);
+	store |= (3 << 4);
+	netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, store, 0);
+
+	ret = netup_fpga_op_rw(inter, NETUP_CI_REVISION, 0, NETUP_CI_FLG_RD);
+	/* enable irq */
+	netup_fpga_op_rw(inter, NETUP_CI_INT_CTRL, 0x44, 0);
+
+	mutex_unlock(&inter->fpga_mutex);
+
+	ci_dbg_print("%s: NetUP CI Revision = 0x%x\n", __func__, ret);
+
+	schedule_work(&inter->work);
+
+	return 0;
+err:
+	ci_dbg_print("%s: Cannot initialize CI: Error %d.\n", __func__, ret);
+
+	kfree(state);
+
+	return ret;
+}
+EXPORT_SYMBOL(altera_ci_init);
+
+int altera_ci_tuner_reset(void *dev, int ci_nr)
+{
+	struct fpga_inode *temp_int = find_inode(dev);
+	struct fpga_internal *inter = NULL;
+	u8 store;
+
+	ci_dbg_print("%s\n", __func__);
+
+	if (temp_int == NULL)
+		return -1;
+
+	if (temp_int->internal == NULL)
+		return -1;
+
+	inter = temp_int->internal;
+
+	mutex_lock(&inter->fpga_mutex);
+
+	store = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, 0, NETUP_CI_FLG_RD);
+	store &= ~(4 << (2 - ci_nr));
+	netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, store, 0);
+	msleep(100);
+	store |= (4 << (2 - ci_nr));
+	netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, store, 0);
+
+	mutex_unlock(&inter->fpga_mutex);
+
+	return 0;
+}
+EXPORT_SYMBOL(altera_ci_tuner_reset);
diff --git a/drivers/media/pci/cx23885/altera-ci.h b/drivers/media/pci/cx23885/altera-ci.h
new file mode 100644
index 0000000..70e4fd6
--- /dev/null
+++ b/drivers/media/pci/cx23885/altera-ci.h
@@ -0,0 +1,100 @@
+/*
+ * altera-ci.c
+ *
+ *  CI driver in conjunction with NetUp Dual DVB-T/C RF CI card
+ *
+ * Copyright (C) 2010 NetUP Inc.
+ * Copyright (C) 2010 Igor M. Liplianin <liplianin@netup.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ALTERA_CI_H
+#define __ALTERA_CI_H
+
+#define ALT_DATA	0x000000ff
+#define ALT_TDI		0x00008000
+#define ALT_TDO		0x00004000
+#define ALT_TCK		0x00002000
+#define ALT_RDY		0x00001000
+#define ALT_RD		0x00000800
+#define ALT_WR		0x00000400
+#define ALT_AD_RG	0x00000200
+#define ALT_CS		0x00000100
+
+struct altera_ci_config {
+	void *dev;/* main dev, for example cx23885_dev */
+	void *adapter;/* for CI to connect to */
+	struct dvb_demux *demux;/* for hardware PID filter to connect to */
+	int (*fpga_rw) (void *dev, int ad_rg, int val, int rw);
+};
+
+#if defined(CONFIG_MEDIA_ALTERA_CI) || (defined(CONFIG_MEDIA_ALTERA_CI_MODULE) \
+							&& defined(MODULE))
+
+extern int altera_ci_init(struct altera_ci_config *config, int ci_nr);
+extern void altera_ci_release(void *dev, int ci_nr);
+extern int altera_ci_irq(void *dev);
+extern int altera_ci_tuner_reset(void *dev, int ci_nr);
+
+#else
+
+static inline int altera_ci_init(struct altera_ci_config *config, int ci_nr)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return 0;
+}
+
+static inline void altera_ci_release(void *dev, int ci_nr)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+}
+
+static inline int altera_ci_irq(void *dev)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return 0;
+}
+
+static inline int altera_ci_tuner_reset(void *dev, int ci_nr)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return 0;
+}
+
+#endif
+#if 0
+static inline int altera_hw_filt_init(struct altera_ci_config *config,
+							int hw_filt_nr)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return 0;
+}
+
+static inline void altera_hw_filt_release(void *dev, int filt_nr)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+}
+
+static inline int altera_pid_feed_control(void *dev, int filt_nr,
+		struct dvb_demux_feed *dvbdmxfeed, int onoff)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return 0;
+}
+
+#endif /* CONFIG_MEDIA_ALTERA_CI */
+
+#endif /* __ALTERA_CI_H */
diff --git a/drivers/media/pci/cx23885/cimax2.c b/drivers/media/pci/cx23885/cimax2.c
new file mode 100644
index 0000000..c9f15d6
--- /dev/null
+++ b/drivers/media/pci/cx23885/cimax2.c
@@ -0,0 +1,536 @@
+/*
+ * cimax2.c
+ *
+ * CIMax2(R) SP2 driver in conjunction with NetUp Dual DVB-S2 CI card
+ *
+ * Copyright (C) 2009 NetUP Inc.
+ * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
+ * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "cx23885.h"
+#include "dvb_ca_en50221.h"
+/**** Bit definitions for MC417_RWD and MC417_OEN registers  ***
+  bits 31-16
++-----------+
+| Reserved  |
++-----------+
+  bit 15  bit 14  bit 13 bit 12  bit 11  bit 10  bit 9   bit 8
++-------+-------+-------+-------+-------+-------+-------+-------+
+|  WR#  |  RD#  |       |  ACK# |  ADHI |  ADLO |  CS1# |  CS0# |
++-------+-------+-------+-------+-------+-------+-------+-------+
+ bit 7   bit 6   bit 5   bit 4   bit 3   bit 2   bit 1   bit 0
++-------+-------+-------+-------+-------+-------+-------+-------+
+|  DATA7|  DATA6|  DATA5|  DATA4|  DATA3|  DATA2|  DATA1|  DATA0|
++-------+-------+-------+-------+-------+-------+-------+-------+
+***/
+/* MC417 */
+#define NETUP_DATA		0x000000ff
+#define NETUP_WR		0x00008000
+#define NETUP_RD		0x00004000
+#define NETUP_ACK		0x00001000
+#define NETUP_ADHI		0x00000800
+#define NETUP_ADLO		0x00000400
+#define NETUP_CS1		0x00000200
+#define NETUP_CS0		0x00000100
+#define NETUP_EN_ALL		0x00001000
+#define NETUP_CTRL_OFF		(NETUP_CS1 | NETUP_CS0 | NETUP_WR | NETUP_RD)
+#define NETUP_CI_CTL		0x04
+#define NETUP_CI_RD		1
+
+#define NETUP_IRQ_DETAM 	0x1
+#define NETUP_IRQ_IRQAM		0x4
+
+static unsigned int ci_dbg;
+module_param(ci_dbg, int, 0644);
+MODULE_PARM_DESC(ci_dbg, "Enable CI debugging");
+
+static unsigned int ci_irq_enable;
+module_param(ci_irq_enable, int, 0644);
+MODULE_PARM_DESC(ci_irq_enable, "Enable IRQ from CAM");
+
+#define ci_dbg_print(args...) \
+	do { \
+		if (ci_dbg) \
+			printk(KERN_DEBUG args); \
+	} while (0)
+
+#define ci_irq_flags() (ci_irq_enable ? NETUP_IRQ_IRQAM : 0)
+
+/* stores all private variables for communication with CI */
+struct netup_ci_state {
+	struct dvb_ca_en50221 ca;
+	struct mutex ca_mutex;
+	struct i2c_adapter *i2c_adap;
+	u8 ci_i2c_addr;
+	int status;
+	struct work_struct work;
+	void *priv;
+	u8 current_irq_mode;
+	int current_ci_flag;
+	unsigned long next_status_checked_time;
+};
+
+
+int netup_read_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg,
+						u8 *buf, int len)
+{
+	int ret;
+	struct i2c_msg msg[] = {
+		{
+			.addr	= addr,
+			.flags	= 0,
+			.buf	= &reg,
+			.len	= 1
+		}, {
+			.addr	= addr,
+			.flags	= I2C_M_RD,
+			.buf	= buf,
+			.len	= len
+		}
+	};
+
+	ret = i2c_transfer(i2c_adap, msg, 2);
+
+	if (ret != 2) {
+		ci_dbg_print("%s: i2c read error, Reg = 0x%02x, Status = %d\n",
+						__func__, reg, ret);
+
+		return -1;
+	}
+
+	ci_dbg_print("%s: i2c read Addr=0x%04x, Reg = 0x%02x, data = %02x\n",
+						__func__, addr, reg, buf[0]);
+
+	return 0;
+}
+
+int netup_write_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg,
+						u8 *buf, int len)
+{
+	int ret;
+	u8 buffer[len + 1];
+
+	struct i2c_msg msg = {
+		.addr	= addr,
+		.flags	= 0,
+		.buf	= &buffer[0],
+		.len	= len + 1
+	};
+
+	buffer[0] = reg;
+	memcpy(&buffer[1], buf, len);
+
+	ret = i2c_transfer(i2c_adap, &msg, 1);
+
+	if (ret != 1) {
+		ci_dbg_print("%s: i2c write error, Reg=[0x%02x], Status=%d\n",
+						__func__, reg, ret);
+		return -1;
+	}
+
+	return 0;
+}
+
+int netup_ci_get_mem(struct cx23885_dev *dev)
+{
+	int mem;
+	unsigned long timeout = jiffies + msecs_to_jiffies(1);
+
+	for (;;) {
+		mem = cx_read(MC417_RWD);
+		if ((mem & NETUP_ACK) == 0)
+			break;
+		if (time_after(jiffies, timeout))
+			break;
+		udelay(1);
+	}
+
+	cx_set(MC417_RWD, NETUP_CTRL_OFF);
+
+	return mem & 0xff;
+}
+
+int netup_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot,
+				u8 flag, u8 read, int addr, u8 data)
+{
+	struct netup_ci_state *state = en50221->data;
+	struct cx23885_tsport *port = state->priv;
+	struct cx23885_dev *dev = port->dev;
+
+	u8 store;
+	int mem;
+	int ret;
+
+	if (0 != slot)
+		return -EINVAL;
+
+	if (state->current_ci_flag != flag) {
+		ret = netup_read_i2c(state->i2c_adap, state->ci_i2c_addr,
+				0, &store, 1);
+		if (ret != 0)
+			return ret;
+
+		store &= ~0x0c;
+		store |= flag;
+
+		ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
+				0, &store, 1);
+		if (ret != 0)
+			return ret;
+	};
+	state->current_ci_flag = flag;
+
+	mutex_lock(&dev->gpio_lock);
+
+	/* write addr */
+	cx_write(MC417_OEN, NETUP_EN_ALL);
+	cx_write(MC417_RWD, NETUP_CTRL_OFF |
+				NETUP_ADLO | (0xff & addr));
+	cx_clear(MC417_RWD, NETUP_ADLO);
+	cx_write(MC417_RWD, NETUP_CTRL_OFF |
+				NETUP_ADHI | (0xff & (addr >> 8)));
+	cx_clear(MC417_RWD, NETUP_ADHI);
+
+	if (read) { /* data in */
+		cx_write(MC417_OEN, NETUP_EN_ALL | NETUP_DATA);
+	} else /* data out */
+		cx_write(MC417_RWD, NETUP_CTRL_OFF | data);
+
+	/* choose chip */
+	cx_clear(MC417_RWD,
+			(state->ci_i2c_addr == 0x40) ? NETUP_CS0 : NETUP_CS1);
+	/* read/write */
+	cx_clear(MC417_RWD, (read) ? NETUP_RD : NETUP_WR);
+	mem = netup_ci_get_mem(dev);
+
+	mutex_unlock(&dev->gpio_lock);
+
+	if (!read)
+		if (mem < 0)
+			return -EREMOTEIO;
+
+	ci_dbg_print("%s: %s: chipaddr=[0x%x] addr=[0x%02x], %s=%x\n", __func__,
+			(read) ? "read" : "write", state->ci_i2c_addr, addr,
+			(flag == NETUP_CI_CTL) ? "ctl" : "mem",
+			(read) ? mem : data);
+
+	if (read)
+		return mem;
+
+	return 0;
+}
+
+int netup_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221,
+						int slot, int addr)
+{
+	return netup_ci_op_cam(en50221, slot, 0, NETUP_CI_RD, addr, 0);
+}
+
+int netup_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221,
+						int slot, int addr, u8 data)
+{
+	return netup_ci_op_cam(en50221, slot, 0, 0, addr, data);
+}
+
+int netup_ci_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr)
+{
+	return netup_ci_op_cam(en50221, slot, NETUP_CI_CTL,
+							NETUP_CI_RD, addr, 0);
+}
+
+int netup_ci_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot,
+							u8 addr, u8 data)
+{
+	return netup_ci_op_cam(en50221, slot, NETUP_CI_CTL, 0, addr, data);
+}
+
+int netup_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot)
+{
+	struct netup_ci_state *state = en50221->data;
+	u8 buf =  0x80;
+	int ret;
+
+	if (0 != slot)
+		return -EINVAL;
+
+	udelay(500);
+	ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
+							0, &buf, 1);
+
+	if (ret != 0)
+		return ret;
+
+	udelay(500);
+
+	buf = 0x00;
+	ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
+							0, &buf, 1);
+
+	msleep(1000);
+	dvb_ca_en50221_camready_irq(&state->ca, 0);
+
+	return 0;
+
+}
+
+int netup_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot)
+{
+	/* not implemented */
+	return 0;
+}
+
+int netup_ci_set_irq(struct dvb_ca_en50221 *en50221, u8 irq_mode)
+{
+	struct netup_ci_state *state = en50221->data;
+	int ret;
+
+	if (irq_mode == state->current_irq_mode)
+		return 0;
+
+	ci_dbg_print("%s: chipaddr=[0x%x] setting ci IRQ to [0x%x] \n",
+			__func__, state->ci_i2c_addr, irq_mode);
+	ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
+							0x1b, &irq_mode, 1);
+
+	if (ret != 0)
+		return ret;
+
+	state->current_irq_mode = irq_mode;
+
+	return 0;
+}
+
+int netup_ci_slot_ts_ctl(struct dvb_ca_en50221 *en50221, int slot)
+{
+	struct netup_ci_state *state = en50221->data;
+	u8 buf;
+
+	if (0 != slot)
+		return -EINVAL;
+
+	netup_read_i2c(state->i2c_adap, state->ci_i2c_addr,
+			0, &buf, 1);
+	buf |= 0x60;
+
+	return netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
+							0, &buf, 1);
+}
+
+/* work handler */
+static void netup_read_ci_status(struct work_struct *work)
+{
+	struct netup_ci_state *state =
+			container_of(work, struct netup_ci_state, work);
+	u8 buf[33];
+	int ret;
+
+	/* CAM module IRQ processing. fast operation */
+	dvb_ca_en50221_frda_irq(&state->ca, 0);
+
+	/* CAM module INSERT/REMOVE processing. slow operation because of i2c
+	 * transfers */
+	if (time_after(jiffies, state->next_status_checked_time)
+			|| !state->status) {
+		ret = netup_read_i2c(state->i2c_adap, state->ci_i2c_addr,
+				0, &buf[0], 33);
+
+		state->next_status_checked_time = jiffies
+			+ msecs_to_jiffies(1000);
+
+		if (ret != 0)
+			return;
+
+		ci_dbg_print("%s: Slot Status Addr=[0x%04x], "
+				"Reg=[0x%02x], data=%02x, "
+				"TS config = %02x\n", __func__,
+				state->ci_i2c_addr, 0, buf[0],
+				buf[0]);
+
+
+		if (buf[0] & 1)
+			state->status = DVB_CA_EN50221_POLL_CAM_PRESENT |
+				DVB_CA_EN50221_POLL_CAM_READY;
+		else
+			state->status = 0;
+	}
+}
+
+/* CI irq handler */
+int netup_ci_slot_status(struct cx23885_dev *dev, u32 pci_status)
+{
+	struct cx23885_tsport *port = NULL;
+	struct netup_ci_state *state = NULL;
+
+	ci_dbg_print("%s:\n", __func__);
+
+	if (0 == (pci_status & (PCI_MSK_GPIO0 | PCI_MSK_GPIO1)))
+		return 0;
+
+	if (pci_status & PCI_MSK_GPIO0) {
+		port = &dev->ts1;
+		state = port->port_priv;
+		schedule_work(&state->work);
+		ci_dbg_print("%s: Wakeup CI0\n", __func__);
+	}
+
+	if (pci_status & PCI_MSK_GPIO1) {
+		port = &dev->ts2;
+		state = port->port_priv;
+		schedule_work(&state->work);
+		ci_dbg_print("%s: Wakeup CI1\n", __func__);
+	}
+
+	return 1;
+}
+
+int netup_poll_ci_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open)
+{
+	struct netup_ci_state *state = en50221->data;
+
+	if (0 != slot)
+		return -EINVAL;
+
+	netup_ci_set_irq(en50221, open ? (NETUP_IRQ_DETAM | ci_irq_flags())
+			: NETUP_IRQ_DETAM);
+
+	return state->status;
+}
+
+int netup_ci_init(struct cx23885_tsport *port)
+{
+	struct netup_ci_state *state;
+	u8 cimax_init[34] = {
+		0x00, /* module A control*/
+		0x00, /* auto select mask high A */
+		0x00, /* auto select mask low A */
+		0x00, /* auto select pattern high A */
+		0x00, /* auto select pattern low A */
+		0x44, /* memory access time A */
+		0x00, /* invert input A */
+		0x00, /* RFU */
+		0x00, /* RFU */
+		0x00, /* module B control*/
+		0x00, /* auto select mask high B */
+		0x00, /* auto select mask low B */
+		0x00, /* auto select pattern high B */
+		0x00, /* auto select pattern low B */
+		0x44, /* memory access time B */
+		0x00, /* invert input B */
+		0x00, /* RFU */
+		0x00, /* RFU */
+		0x00, /* auto select mask high Ext */
+		0x00, /* auto select mask low Ext */
+		0x00, /* auto select pattern high Ext */
+		0x00, /* auto select pattern low Ext */
+		0x00, /* RFU */
+		0x02, /* destination - module A */
+		0x01, /* power on (use it like store place) */
+		0x00, /* RFU */
+		0x00, /* int status read only */
+		ci_irq_flags() | NETUP_IRQ_DETAM, /* DETAM, IRQAM unmasked */
+		0x05, /* EXTINT=active-high, INT=push-pull */
+		0x00, /* USCG1 */
+		0x04, /* ack active low */
+		0x00, /* LOCK = 0 */
+		0x33, /* serial mode, rising in, rising out, MSB first*/
+		0x31, /* synchronization */
+	};
+	int ret;
+
+	ci_dbg_print("%s\n", __func__);
+	state = kzalloc(sizeof(struct netup_ci_state), GFP_KERNEL);
+	if (!state) {
+		ci_dbg_print("%s: Unable create CI structure!\n", __func__);
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	port->port_priv = state;
+
+	switch (port->nr) {
+	case 1:
+		state->ci_i2c_addr = 0x40;
+		break;
+	case 2:
+		state->ci_i2c_addr = 0x41;
+		break;
+	}
+
+	state->i2c_adap = &port->dev->i2c_bus[0].i2c_adap;
+	state->ca.owner = THIS_MODULE;
+	state->ca.read_attribute_mem = netup_ci_read_attribute_mem;
+	state->ca.write_attribute_mem = netup_ci_write_attribute_mem;
+	state->ca.read_cam_control = netup_ci_read_cam_ctl;
+	state->ca.write_cam_control = netup_ci_write_cam_ctl;
+	state->ca.slot_reset = netup_ci_slot_reset;
+	state->ca.slot_shutdown = netup_ci_slot_shutdown;
+	state->ca.slot_ts_enable = netup_ci_slot_ts_ctl;
+	state->ca.poll_slot_status = netup_poll_ci_slot_status;
+	state->ca.data = state;
+	state->priv = port;
+	state->current_irq_mode = ci_irq_flags() | NETUP_IRQ_DETAM;
+
+	ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
+						0, &cimax_init[0], 34);
+	/* lock registers */
+	ret |= netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
+						0x1f, &cimax_init[0x18], 1);
+	/* power on slots */
+	ret |= netup_write_i2c(state->i2c_adap, state->ci_i2c_addr,
+						0x18, &cimax_init[0x18], 1);
+
+	if (0 != ret)
+		goto err;
+
+	ret = dvb_ca_en50221_init(&port->frontends.adapter,
+				   &state->ca,
+				   /* flags */ 0,
+				   /* n_slots */ 1);
+	if (0 != ret)
+		goto err;
+
+	INIT_WORK(&state->work, netup_read_ci_status);
+	schedule_work(&state->work);
+
+	ci_dbg_print("%s: CI initialized!\n", __func__);
+
+	return 0;
+err:
+	ci_dbg_print("%s: Cannot initialize CI: Error %d.\n", __func__, ret);
+	kfree(state);
+	return ret;
+}
+
+void netup_ci_exit(struct cx23885_tsport *port)
+{
+	struct netup_ci_state *state;
+
+	if (NULL == port)
+		return;
+
+	state = (struct netup_ci_state *)port->port_priv;
+	if (NULL == state)
+		return;
+
+	if (NULL == state->ca.data)
+		return;
+
+	dvb_ca_en50221_release(&state->ca);
+	kfree(state);
+}
diff --git a/drivers/media/pci/cx23885/cimax2.h b/drivers/media/pci/cx23885/cimax2.h
new file mode 100644
index 0000000..518744a
--- /dev/null
+++ b/drivers/media/pci/cx23885/cimax2.h
@@ -0,0 +1,47 @@
+/*
+ * cimax2.h
+ *
+ * CIMax(R) SP2 driver in conjunction with NetUp Dual DVB-S2 CI card
+ *
+ * Copyright (C) 2009 NetUP Inc.
+ * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
+ * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef CIMAX2_H
+#define CIMAX2_H
+#include "dvb_ca_en50221.h"
+
+extern int netup_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221,
+						int slot, int addr);
+extern int netup_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221,
+						int slot, int addr, u8 data);
+extern int netup_ci_read_cam_ctl(struct dvb_ca_en50221 *en50221,
+						int slot, u8 addr);
+extern int netup_ci_write_cam_ctl(struct dvb_ca_en50221 *en50221,
+						int slot, u8 addr, u8 data);
+extern int netup_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot);
+extern int netup_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot);
+extern int netup_ci_slot_ts_ctl(struct dvb_ca_en50221 *en50221, int slot);
+extern int netup_ci_slot_status(struct cx23885_dev *dev, u32 pci_status);
+extern int netup_poll_ci_slot_status(struct dvb_ca_en50221 *en50221,
+						int slot, int open);
+extern int netup_ci_init(struct cx23885_tsport *port);
+extern void netup_ci_exit(struct cx23885_tsport *port);
+
+#endif
diff --git a/drivers/media/pci/cx23885/cx23885-417.c b/drivers/media/pci/cx23885/cx23885-417.c
new file mode 100644
index 0000000..5d5052d
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-417.c
@@ -0,0 +1,1790 @@
+/*
+ *
+ *  Support for a cx23417 mpeg encoder via cx23885 host port.
+ *
+ *    (c) 2004 Jelle Foks <jelle@foks.us>
+ *    (c) 2004 Gerd Knorr <kraxel@bytesex.org>
+ *    (c) 2008 Steven Toth <stoth@linuxtv.org>
+ *      - CX23885/7/8 support
+ *
+ *  Includes parts from the ivtv driver <http://sourceforge.net/projects/ivtv/>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/cx2341x.h>
+
+#include "cx23885.h"
+#include "cx23885-ioctl.h"
+
+#define CX23885_FIRM_IMAGE_SIZE 376836
+#define CX23885_FIRM_IMAGE_NAME "v4l-cx23885-enc.fw"
+
+static unsigned int mpegbufs = 32;
+module_param(mpegbufs, int, 0644);
+MODULE_PARM_DESC(mpegbufs, "number of mpeg buffers, range 2-32");
+static unsigned int mpeglines = 32;
+module_param(mpeglines, int, 0644);
+MODULE_PARM_DESC(mpeglines, "number of lines in an MPEG buffer, range 2-32");
+static unsigned int mpeglinesize = 512;
+module_param(mpeglinesize, int, 0644);
+MODULE_PARM_DESC(mpeglinesize,
+	"number of bytes in each line of an MPEG buffer, range 512-1024");
+
+static unsigned int v4l_debug;
+module_param(v4l_debug, int, 0644);
+MODULE_PARM_DESC(v4l_debug, "enable V4L debug messages");
+
+#define dprintk(level, fmt, arg...)\
+	do { if (v4l_debug >= level) \
+		printk(KERN_DEBUG "%s: " fmt, \
+		(dev) ? dev->name : "cx23885[?]", ## arg); \
+	} while (0)
+
+static struct cx23885_tvnorm cx23885_tvnorms[] = {
+	{
+		.name      = "NTSC-M",
+		.id        = V4L2_STD_NTSC_M,
+	}, {
+		.name      = "NTSC-JP",
+		.id        = V4L2_STD_NTSC_M_JP,
+	}, {
+		.name      = "PAL-BG",
+		.id        = V4L2_STD_PAL_BG,
+	}, {
+		.name      = "PAL-DK",
+		.id        = V4L2_STD_PAL_DK,
+	}, {
+		.name      = "PAL-I",
+		.id        = V4L2_STD_PAL_I,
+	}, {
+		.name      = "PAL-M",
+		.id        = V4L2_STD_PAL_M,
+	}, {
+		.name      = "PAL-N",
+		.id        = V4L2_STD_PAL_N,
+	}, {
+		.name      = "PAL-Nc",
+		.id        = V4L2_STD_PAL_Nc,
+	}, {
+		.name      = "PAL-60",
+		.id        = V4L2_STD_PAL_60,
+	}, {
+		.name      = "SECAM-L",
+		.id        = V4L2_STD_SECAM_L,
+	}, {
+		.name      = "SECAM-DK",
+		.id        = V4L2_STD_SECAM_DK,
+	}
+};
+
+/* ------------------------------------------------------------------ */
+enum cx23885_capture_type {
+	CX23885_MPEG_CAPTURE,
+	CX23885_RAW_CAPTURE,
+	CX23885_RAW_PASSTHRU_CAPTURE
+};
+enum cx23885_capture_bits {
+	CX23885_RAW_BITS_NONE             = 0x00,
+	CX23885_RAW_BITS_YUV_CAPTURE      = 0x01,
+	CX23885_RAW_BITS_PCM_CAPTURE      = 0x02,
+	CX23885_RAW_BITS_VBI_CAPTURE      = 0x04,
+	CX23885_RAW_BITS_PASSTHRU_CAPTURE = 0x08,
+	CX23885_RAW_BITS_TO_HOST_CAPTURE  = 0x10
+};
+enum cx23885_capture_end {
+	CX23885_END_AT_GOP, /* stop at the end of gop, generate irq */
+	CX23885_END_NOW, /* stop immediately, no irq */
+};
+enum cx23885_framerate {
+	CX23885_FRAMERATE_NTSC_30, /* NTSC: 30fps */
+	CX23885_FRAMERATE_PAL_25   /* PAL: 25fps */
+};
+enum cx23885_stream_port {
+	CX23885_OUTPUT_PORT_MEMORY,
+	CX23885_OUTPUT_PORT_STREAMING,
+	CX23885_OUTPUT_PORT_SERIAL
+};
+enum cx23885_data_xfer_status {
+	CX23885_MORE_BUFFERS_FOLLOW,
+	CX23885_LAST_BUFFER,
+};
+enum cx23885_picture_mask {
+	CX23885_PICTURE_MASK_NONE,
+	CX23885_PICTURE_MASK_I_FRAMES,
+	CX23885_PICTURE_MASK_I_P_FRAMES = 0x3,
+	CX23885_PICTURE_MASK_ALL_FRAMES = 0x7,
+};
+enum cx23885_vbi_mode_bits {
+	CX23885_VBI_BITS_SLICED,
+	CX23885_VBI_BITS_RAW,
+};
+enum cx23885_vbi_insertion_bits {
+	CX23885_VBI_BITS_INSERT_IN_XTENSION_USR_DATA,
+	CX23885_VBI_BITS_INSERT_IN_PRIVATE_PACKETS = 0x1 << 1,
+	CX23885_VBI_BITS_SEPARATE_STREAM = 0x2 << 1,
+	CX23885_VBI_BITS_SEPARATE_STREAM_USR_DATA = 0x4 << 1,
+	CX23885_VBI_BITS_SEPARATE_STREAM_PRV_DATA = 0x5 << 1,
+};
+enum cx23885_dma_unit {
+	CX23885_DMA_BYTES,
+	CX23885_DMA_FRAMES,
+};
+enum cx23885_dma_transfer_status_bits {
+	CX23885_DMA_TRANSFER_BITS_DONE = 0x01,
+	CX23885_DMA_TRANSFER_BITS_ERROR = 0x04,
+	CX23885_DMA_TRANSFER_BITS_LL_ERROR = 0x10,
+};
+enum cx23885_pause {
+	CX23885_PAUSE_ENCODING,
+	CX23885_RESUME_ENCODING,
+};
+enum cx23885_copyright {
+	CX23885_COPYRIGHT_OFF,
+	CX23885_COPYRIGHT_ON,
+};
+enum cx23885_notification_type {
+	CX23885_NOTIFICATION_REFRESH,
+};
+enum cx23885_notification_status {
+	CX23885_NOTIFICATION_OFF,
+	CX23885_NOTIFICATION_ON,
+};
+enum cx23885_notification_mailbox {
+	CX23885_NOTIFICATION_NO_MAILBOX = -1,
+};
+enum cx23885_field1_lines {
+	CX23885_FIELD1_SAA7114 = 0x00EF, /* 239 */
+	CX23885_FIELD1_SAA7115 = 0x00F0, /* 240 */
+	CX23885_FIELD1_MICRONAS = 0x0105, /* 261 */
+};
+enum cx23885_field2_lines {
+	CX23885_FIELD2_SAA7114 = 0x00EF, /* 239 */
+	CX23885_FIELD2_SAA7115 = 0x00F0, /* 240 */
+	CX23885_FIELD2_MICRONAS = 0x0106, /* 262 */
+};
+enum cx23885_custom_data_type {
+	CX23885_CUSTOM_EXTENSION_USR_DATA,
+	CX23885_CUSTOM_PRIVATE_PACKET,
+};
+enum cx23885_mute {
+	CX23885_UNMUTE,
+	CX23885_MUTE,
+};
+enum cx23885_mute_video_mask {
+	CX23885_MUTE_VIDEO_V_MASK = 0x0000FF00,
+	CX23885_MUTE_VIDEO_U_MASK = 0x00FF0000,
+	CX23885_MUTE_VIDEO_Y_MASK = 0xFF000000,
+};
+enum cx23885_mute_video_shift {
+	CX23885_MUTE_VIDEO_V_SHIFT = 8,
+	CX23885_MUTE_VIDEO_U_SHIFT = 16,
+	CX23885_MUTE_VIDEO_Y_SHIFT = 24,
+};
+
+/* defines below are from ivtv-driver.h */
+#define IVTV_CMD_HW_BLOCKS_RST 0xFFFFFFFF
+
+/* Firmware API commands */
+#define IVTV_API_STD_TIMEOUT 500
+
+/* Registers */
+/* IVTV_REG_OFFSET */
+#define IVTV_REG_ENC_SDRAM_REFRESH (0x07F8)
+#define IVTV_REG_ENC_SDRAM_PRECHARGE (0x07FC)
+#define IVTV_REG_SPU (0x9050)
+#define IVTV_REG_HW_BLOCKS (0x9054)
+#define IVTV_REG_VPU (0x9058)
+#define IVTV_REG_APU (0xA064)
+
+/**** Bit definitions for MC417_RWD and MC417_OEN registers  ***
+  bits 31-16
++-----------+
+| Reserved  |
++-----------+
+  bit 15  bit 14  bit 13 bit 12  bit 11  bit 10  bit 9   bit 8
++-------+-------+-------+-------+-------+-------+-------+-------+
+| MIWR# | MIRD# | MICS# |MIRDY# |MIADDR3|MIADDR2|MIADDR1|MIADDR0|
++-------+-------+-------+-------+-------+-------+-------+-------+
+ bit 7   bit 6   bit 5   bit 4   bit 3   bit 2   bit 1   bit 0
++-------+-------+-------+-------+-------+-------+-------+-------+
+|MIDATA7|MIDATA6|MIDATA5|MIDATA4|MIDATA3|MIDATA2|MIDATA1|MIDATA0|
++-------+-------+-------+-------+-------+-------+-------+-------+
+***/
+#define MC417_MIWR	0x8000
+#define MC417_MIRD	0x4000
+#define MC417_MICS	0x2000
+#define MC417_MIRDY	0x1000
+#define MC417_MIADDR	0x0F00
+#define MC417_MIDATA	0x00FF
+
+/* MIADDR* nibble definitions */
+#define  MCI_MEMORY_DATA_BYTE0          0x000
+#define  MCI_MEMORY_DATA_BYTE1          0x100
+#define  MCI_MEMORY_DATA_BYTE2          0x200
+#define  MCI_MEMORY_DATA_BYTE3          0x300
+#define  MCI_MEMORY_ADDRESS_BYTE2       0x400
+#define  MCI_MEMORY_ADDRESS_BYTE1       0x500
+#define  MCI_MEMORY_ADDRESS_BYTE0       0x600
+#define  MCI_REGISTER_DATA_BYTE0        0x800
+#define  MCI_REGISTER_DATA_BYTE1        0x900
+#define  MCI_REGISTER_DATA_BYTE2        0xA00
+#define  MCI_REGISTER_DATA_BYTE3        0xB00
+#define  MCI_REGISTER_ADDRESS_BYTE0     0xC00
+#define  MCI_REGISTER_ADDRESS_BYTE1     0xD00
+#define  MCI_REGISTER_MODE              0xE00
+
+/* Read and write modes */
+#define  MCI_MODE_REGISTER_READ         0
+#define  MCI_MODE_REGISTER_WRITE        1
+#define  MCI_MODE_MEMORY_READ           0
+#define  MCI_MODE_MEMORY_WRITE          0x40
+
+/*** Bit definitions for MC417_CTL register ****
+ bits 31-6   bits 5-4   bit 3    bits 2-1       Bit 0
++--------+-------------+--------+--------------+------------+
+|Reserved|MC417_SPD_CTL|Reserved|MC417_GPIO_SEL|UART_GPIO_EN|
++--------+-------------+--------+--------------+------------+
+***/
+#define MC417_SPD_CTL(x)	(((x) << 4) & 0x00000030)
+#define MC417_GPIO_SEL(x)	(((x) << 1) & 0x00000006)
+#define MC417_UART_GPIO_EN	0x00000001
+
+/* Values for speed control */
+#define MC417_SPD_CTL_SLOW	0x1
+#define MC417_SPD_CTL_MEDIUM	0x0
+#define MC417_SPD_CTL_FAST	0x3     /* b'1x, but we use b'11 */
+
+/* Values for GPIO select */
+#define MC417_GPIO_SEL_GPIO3	0x3
+#define MC417_GPIO_SEL_GPIO2	0x2
+#define MC417_GPIO_SEL_GPIO1	0x1
+#define MC417_GPIO_SEL_GPIO0	0x0
+
+void cx23885_mc417_init(struct cx23885_dev *dev)
+{
+	u32 regval;
+
+	dprintk(2, "%s()\n", __func__);
+
+	/* Configure MC417_CTL register to defaults. */
+	regval = MC417_SPD_CTL(MC417_SPD_CTL_FAST)	|
+		 MC417_GPIO_SEL(MC417_GPIO_SEL_GPIO3)	|
+		 MC417_UART_GPIO_EN;
+	cx_write(MC417_CTL, regval);
+
+	/* Configure MC417_OEN to defaults. */
+	regval = MC417_MIRDY;
+	cx_write(MC417_OEN, regval);
+
+	/* Configure MC417_RWD to defaults. */
+	regval = MC417_MIWR | MC417_MIRD | MC417_MICS;
+	cx_write(MC417_RWD, regval);
+}
+
+static int mc417_wait_ready(struct cx23885_dev *dev)
+{
+	u32 mi_ready;
+	unsigned long timeout = jiffies + msecs_to_jiffies(1);
+
+	for (;;) {
+		mi_ready = cx_read(MC417_RWD) & MC417_MIRDY;
+		if (mi_ready != 0)
+			return 0;
+		if (time_after(jiffies, timeout))
+			return -1;
+		udelay(1);
+	}
+}
+
+int mc417_register_write(struct cx23885_dev *dev, u16 address, u32 value)
+{
+	u32 regval;
+
+	/* Enable MC417 GPIO outputs except for MC417_MIRDY,
+	 * which is an input.
+	 */
+	cx_write(MC417_OEN, MC417_MIRDY);
+
+	/* Write data byte 0 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE0 |
+		(value & 0x000000FF);
+	cx_write(MC417_RWD, regval);
+
+	/* Transition CS/WR to effect write transaction across bus. */
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write data byte 1 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE1 |
+		((value >> 8) & 0x000000FF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write data byte 2 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE2 |
+		((value >> 16) & 0x000000FF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write data byte 3 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE3 |
+		((value >> 24) & 0x000000FF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write address byte 0 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE0 |
+		(address & 0xFF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write address byte 1 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE1 |
+		((address >> 8) & 0xFF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Indicate that this is a write. */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_MODE |
+		MCI_MODE_REGISTER_WRITE;
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Wait for the trans to complete (MC417_MIRDY asserted). */
+	return mc417_wait_ready(dev);
+}
+
+int mc417_register_read(struct cx23885_dev *dev, u16 address, u32 *value)
+{
+	int retval;
+	u32 regval;
+	u32 tempval;
+	u32 dataval;
+
+	/* Enable MC417 GPIO outputs except for MC417_MIRDY,
+	 * which is an input.
+	 */
+	cx_write(MC417_OEN, MC417_MIRDY);
+
+	/* Write address byte 0 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE0 |
+		((address & 0x00FF));
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write address byte 1 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE1 |
+		((address >> 8) & 0xFF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Indicate that this is a register read. */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_MODE |
+		MCI_MODE_REGISTER_READ;
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Wait for the trans to complete (MC417_MIRDY asserted). */
+	retval = mc417_wait_ready(dev);
+
+	/* switch the DAT0-7 GPIO[10:3] to input mode */
+	cx_write(MC417_OEN, MC417_MIRDY | MC417_MIDATA);
+
+	/* Read data byte 0 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE0;
+	cx_write(MC417_RWD, regval);
+
+	/* Transition RD to effect read transaction across bus.
+	 * Transtion 0x5000 -> 0x9000 correct (RD/RDY -> WR/RDY)?
+	 * Should it be 0x9000 -> 0xF000 (also why is RDY being set, its
+	 * input only...)
+	 */
+	regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE0;
+	cx_write(MC417_RWD, regval);
+
+	/* Collect byte */
+	tempval = cx_read(MC417_RWD);
+	dataval = tempval & 0x000000FF;
+
+	/* Bring CS and RD high. */
+	regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY;
+	cx_write(MC417_RWD, regval);
+
+	/* Read data byte 1 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE1;
+	cx_write(MC417_RWD, regval);
+	regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE1;
+	cx_write(MC417_RWD, regval);
+	tempval = cx_read(MC417_RWD);
+	dataval |= ((tempval & 0x000000FF) << 8);
+	regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY;
+	cx_write(MC417_RWD, regval);
+
+	/* Read data byte 2 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE2;
+	cx_write(MC417_RWD, regval);
+	regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE2;
+	cx_write(MC417_RWD, regval);
+	tempval = cx_read(MC417_RWD);
+	dataval |= ((tempval & 0x000000FF) << 16);
+	regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY;
+	cx_write(MC417_RWD, regval);
+
+	/* Read data byte 3 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE3;
+	cx_write(MC417_RWD, regval);
+	regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE3;
+	cx_write(MC417_RWD, regval);
+	tempval = cx_read(MC417_RWD);
+	dataval |= ((tempval & 0x000000FF) << 24);
+	regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY;
+	cx_write(MC417_RWD, regval);
+
+	*value  = dataval;
+
+	return retval;
+}
+
+int mc417_memory_write(struct cx23885_dev *dev, u32 address, u32 value)
+{
+	u32 regval;
+
+	/* Enable MC417 GPIO outputs except for MC417_MIRDY,
+	 * which is an input.
+	 */
+	cx_write(MC417_OEN, MC417_MIRDY);
+
+	/* Write data byte 0 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE0 |
+		(value & 0x000000FF);
+	cx_write(MC417_RWD, regval);
+
+	/* Transition CS/WR to effect write transaction across bus. */
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write data byte 1 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE1 |
+		((value >> 8) & 0x000000FF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write data byte 2 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE2 |
+		((value >> 16) & 0x000000FF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write data byte 3 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE3 |
+		((value >> 24) & 0x000000FF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write address byte 2 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE2 |
+		MCI_MODE_MEMORY_WRITE | ((address >> 16) & 0x3F);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write address byte 1 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE1 |
+		((address >> 8) & 0xFF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write address byte 0 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE0 |
+		(address & 0xFF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Wait for the trans to complete (MC417_MIRDY asserted). */
+	return mc417_wait_ready(dev);
+}
+
+int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value)
+{
+	int retval;
+	u32 regval;
+	u32 tempval;
+	u32 dataval;
+
+	/* Enable MC417 GPIO outputs except for MC417_MIRDY,
+	 * which is an input.
+	 */
+	cx_write(MC417_OEN, MC417_MIRDY);
+
+	/* Write address byte 2 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE2 |
+		MCI_MODE_MEMORY_READ | ((address >> 16) & 0x3F);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write address byte 1 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE1 |
+		((address >> 8) & 0xFF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Write address byte 0 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE0 |
+		(address & 0xFF);
+	cx_write(MC417_RWD, regval);
+	regval |= MC417_MICS | MC417_MIWR;
+	cx_write(MC417_RWD, regval);
+
+	/* Wait for the trans to complete (MC417_MIRDY asserted). */
+	retval = mc417_wait_ready(dev);
+
+	/* switch the DAT0-7 GPIO[10:3] to input mode */
+	cx_write(MC417_OEN, MC417_MIRDY | MC417_MIDATA);
+
+	/* Read data byte 3 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE3;
+	cx_write(MC417_RWD, regval);
+
+	/* Transition RD to effect read transaction across bus. */
+	regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE3;
+	cx_write(MC417_RWD, regval);
+
+	/* Collect byte */
+	tempval = cx_read(MC417_RWD);
+	dataval = ((tempval & 0x000000FF) << 24);
+
+	/* Bring CS and RD high. */
+	regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY;
+	cx_write(MC417_RWD, regval);
+
+	/* Read data byte 2 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE2;
+	cx_write(MC417_RWD, regval);
+	regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE2;
+	cx_write(MC417_RWD, regval);
+	tempval = cx_read(MC417_RWD);
+	dataval |= ((tempval & 0x000000FF) << 16);
+	regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY;
+	cx_write(MC417_RWD, regval);
+
+	/* Read data byte 1 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE1;
+	cx_write(MC417_RWD, regval);
+	regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE1;
+	cx_write(MC417_RWD, regval);
+	tempval = cx_read(MC417_RWD);
+	dataval |= ((tempval & 0x000000FF) << 8);
+	regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY;
+	cx_write(MC417_RWD, regval);
+
+	/* Read data byte 0 */
+	regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE0;
+	cx_write(MC417_RWD, regval);
+	regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE0;
+	cx_write(MC417_RWD, regval);
+	tempval = cx_read(MC417_RWD);
+	dataval |= (tempval & 0x000000FF);
+	regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY;
+	cx_write(MC417_RWD, regval);
+
+	*value  = dataval;
+
+	return retval;
+}
+
+void mc417_gpio_set(struct cx23885_dev *dev, u32 mask)
+{
+	u32 val;
+
+	/* Set the gpio value */
+	mc417_register_read(dev, 0x900C, &val);
+	val |= (mask & 0x000ffff);
+	mc417_register_write(dev, 0x900C, val);
+}
+
+void mc417_gpio_clear(struct cx23885_dev *dev, u32 mask)
+{
+	u32 val;
+
+	/* Clear the gpio value */
+	mc417_register_read(dev, 0x900C, &val);
+	val &= ~(mask & 0x0000ffff);
+	mc417_register_write(dev, 0x900C, val);
+}
+
+void mc417_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput)
+{
+	u32 val;
+
+	/* Enable GPIO direction bits */
+	mc417_register_read(dev, 0x9020, &val);
+	if (asoutput)
+		val |= (mask & 0x0000ffff);
+	else
+		val &= ~(mask & 0x0000ffff);
+
+	mc417_register_write(dev, 0x9020, val);
+}
+/* ------------------------------------------------------------------ */
+
+/* MPEG encoder API */
+static char *cmd_to_str(int cmd)
+{
+	switch (cmd) {
+	case CX2341X_ENC_PING_FW:
+		return  "PING_FW";
+	case CX2341X_ENC_START_CAPTURE:
+		return  "START_CAPTURE";
+	case CX2341X_ENC_STOP_CAPTURE:
+		return  "STOP_CAPTURE";
+	case CX2341X_ENC_SET_AUDIO_ID:
+		return  "SET_AUDIO_ID";
+	case CX2341X_ENC_SET_VIDEO_ID:
+		return  "SET_VIDEO_ID";
+	case CX2341X_ENC_SET_PCR_ID:
+		return  "SET_PCR_ID";
+	case CX2341X_ENC_SET_FRAME_RATE:
+		return  "SET_FRAME_RATE";
+	case CX2341X_ENC_SET_FRAME_SIZE:
+		return  "SET_FRAME_SIZE";
+	case CX2341X_ENC_SET_BIT_RATE:
+		return  "SET_BIT_RATE";
+	case CX2341X_ENC_SET_GOP_PROPERTIES:
+		return  "SET_GOP_PROPERTIES";
+	case CX2341X_ENC_SET_ASPECT_RATIO:
+		return  "SET_ASPECT_RATIO";
+	case CX2341X_ENC_SET_DNR_FILTER_MODE:
+		return  "SET_DNR_FILTER_MODE";
+	case CX2341X_ENC_SET_DNR_FILTER_PROPS:
+		return  "SET_DNR_FILTER_PROPS";
+	case CX2341X_ENC_SET_CORING_LEVELS:
+		return  "SET_CORING_LEVELS";
+	case CX2341X_ENC_SET_SPATIAL_FILTER_TYPE:
+		return  "SET_SPATIAL_FILTER_TYPE";
+	case CX2341X_ENC_SET_VBI_LINE:
+		return  "SET_VBI_LINE";
+	case CX2341X_ENC_SET_STREAM_TYPE:
+		return  "SET_STREAM_TYPE";
+	case CX2341X_ENC_SET_OUTPUT_PORT:
+		return  "SET_OUTPUT_PORT";
+	case CX2341X_ENC_SET_AUDIO_PROPERTIES:
+		return  "SET_AUDIO_PROPERTIES";
+	case CX2341X_ENC_HALT_FW:
+		return  "HALT_FW";
+	case CX2341X_ENC_GET_VERSION:
+		return  "GET_VERSION";
+	case CX2341X_ENC_SET_GOP_CLOSURE:
+		return  "SET_GOP_CLOSURE";
+	case CX2341X_ENC_GET_SEQ_END:
+		return  "GET_SEQ_END";
+	case CX2341X_ENC_SET_PGM_INDEX_INFO:
+		return  "SET_PGM_INDEX_INFO";
+	case CX2341X_ENC_SET_VBI_CONFIG:
+		return  "SET_VBI_CONFIG";
+	case CX2341X_ENC_SET_DMA_BLOCK_SIZE:
+		return  "SET_DMA_BLOCK_SIZE";
+	case CX2341X_ENC_GET_PREV_DMA_INFO_MB_10:
+		return  "GET_PREV_DMA_INFO_MB_10";
+	case CX2341X_ENC_GET_PREV_DMA_INFO_MB_9:
+		return  "GET_PREV_DMA_INFO_MB_9";
+	case CX2341X_ENC_SCHED_DMA_TO_HOST:
+		return  "SCHED_DMA_TO_HOST";
+	case CX2341X_ENC_INITIALIZE_INPUT:
+		return  "INITIALIZE_INPUT";
+	case CX2341X_ENC_SET_FRAME_DROP_RATE:
+		return  "SET_FRAME_DROP_RATE";
+	case CX2341X_ENC_PAUSE_ENCODER:
+		return  "PAUSE_ENCODER";
+	case CX2341X_ENC_REFRESH_INPUT:
+		return  "REFRESH_INPUT";
+	case CX2341X_ENC_SET_COPYRIGHT:
+		return  "SET_COPYRIGHT";
+	case CX2341X_ENC_SET_EVENT_NOTIFICATION:
+		return  "SET_EVENT_NOTIFICATION";
+	case CX2341X_ENC_SET_NUM_VSYNC_LINES:
+		return  "SET_NUM_VSYNC_LINES";
+	case CX2341X_ENC_SET_PLACEHOLDER:
+		return  "SET_PLACEHOLDER";
+	case CX2341X_ENC_MUTE_VIDEO:
+		return  "MUTE_VIDEO";
+	case CX2341X_ENC_MUTE_AUDIO:
+		return  "MUTE_AUDIO";
+	case CX2341X_ENC_MISC:
+		return  "MISC";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static int cx23885_mbox_func(void *priv,
+			     u32 command,
+			     int in,
+			     int out,
+			     u32 data[CX2341X_MBOX_MAX_DATA])
+{
+	struct cx23885_dev *dev = priv;
+	unsigned long timeout;
+	u32 value, flag, retval = 0;
+	int i;
+
+	dprintk(3, "%s: command(0x%X) = %s\n", __func__, command,
+		cmd_to_str(command));
+
+	/* this may not be 100% safe if we can't read any memory location
+	   without side effects */
+	mc417_memory_read(dev, dev->cx23417_mailbox - 4, &value);
+	if (value != 0x12345678) {
+		printk(KERN_ERR
+			"Firmware and/or mailbox pointer not initialized "
+			"or corrupted, signature = 0x%x, cmd = %s\n", value,
+			cmd_to_str(command));
+		return -1;
+	}
+
+	/* This read looks at 32 bits, but flag is only 8 bits.
+	 * Seems we also bail if CMD or TIMEOUT bytes are set???
+	 */
+	mc417_memory_read(dev, dev->cx23417_mailbox, &flag);
+	if (flag) {
+		printk(KERN_ERR "ERROR: Mailbox appears to be in use "
+			"(%x), cmd = %s\n", flag, cmd_to_str(command));
+		return -1;
+	}
+
+	flag |= 1; /* tell 'em we're working on it */
+	mc417_memory_write(dev, dev->cx23417_mailbox, flag);
+
+	/* write command + args + fill remaining with zeros */
+	/* command code */
+	mc417_memory_write(dev, dev->cx23417_mailbox + 1, command);
+	mc417_memory_write(dev, dev->cx23417_mailbox + 3,
+		IVTV_API_STD_TIMEOUT); /* timeout */
+	for (i = 0; i < in; i++) {
+		mc417_memory_write(dev, dev->cx23417_mailbox + 4 + i, data[i]);
+		dprintk(3, "API Input %d = %d\n", i, data[i]);
+	}
+	for (; i < CX2341X_MBOX_MAX_DATA; i++)
+		mc417_memory_write(dev, dev->cx23417_mailbox + 4 + i, 0);
+
+	flag |= 3; /* tell 'em we're done writing */
+	mc417_memory_write(dev, dev->cx23417_mailbox, flag);
+
+	/* wait for firmware to handle the API command */
+	timeout = jiffies + msecs_to_jiffies(10);
+	for (;;) {
+		mc417_memory_read(dev, dev->cx23417_mailbox, &flag);
+		if (0 != (flag & 4))
+			break;
+		if (time_after(jiffies, timeout)) {
+			printk(KERN_ERR "ERROR: API Mailbox timeout\n");
+			return -1;
+		}
+		udelay(10);
+	}
+
+	/* read output values */
+	for (i = 0; i < out; i++) {
+		mc417_memory_read(dev, dev->cx23417_mailbox + 4 + i, data + i);
+		dprintk(3, "API Output %d = %d\n", i, data[i]);
+	}
+
+	mc417_memory_read(dev, dev->cx23417_mailbox + 2, &retval);
+	dprintk(3, "API result = %d\n", retval);
+
+	flag = 0;
+	mc417_memory_write(dev, dev->cx23417_mailbox, flag);
+
+	return retval;
+}
+
+/* We don't need to call the API often, so using just one
+ * mailbox will probably suffice
+ */
+static int cx23885_api_cmd(struct cx23885_dev *dev,
+			   u32 command,
+			   u32 inputcnt,
+			   u32 outputcnt,
+			   ...)
+{
+	u32 data[CX2341X_MBOX_MAX_DATA];
+	va_list vargs;
+	int i, err;
+
+	dprintk(3, "%s() cmds = 0x%08x\n", __func__, command);
+
+	va_start(vargs, outputcnt);
+	for (i = 0; i < inputcnt; i++)
+		data[i] = va_arg(vargs, int);
+
+	err = cx23885_mbox_func(dev, command, inputcnt, outputcnt, data);
+	for (i = 0; i < outputcnt; i++) {
+		int *vptr = va_arg(vargs, int *);
+		*vptr = data[i];
+	}
+	va_end(vargs);
+
+	return err;
+}
+
+static int cx23885_find_mailbox(struct cx23885_dev *dev)
+{
+	u32 signature[4] = {
+		0x12345678, 0x34567812, 0x56781234, 0x78123456
+	};
+	int signaturecnt = 0;
+	u32 value;
+	int i;
+
+	dprintk(2, "%s()\n", __func__);
+
+	for (i = 0; i < CX23885_FIRM_IMAGE_SIZE; i++) {
+		mc417_memory_read(dev, i, &value);
+		if (value == signature[signaturecnt])
+			signaturecnt++;
+		else
+			signaturecnt = 0;
+		if (4 == signaturecnt) {
+			dprintk(1, "Mailbox signature found at 0x%x\n", i+1);
+			return i+1;
+		}
+	}
+	printk(KERN_ERR "Mailbox signature values not found!\n");
+	return -1;
+}
+
+static int cx23885_load_firmware(struct cx23885_dev *dev)
+{
+	static const unsigned char magic[8] = {
+		0xa7, 0x0d, 0x00, 0x00, 0x66, 0xbb, 0x55, 0xaa
+	};
+	const struct firmware *firmware;
+	int i, retval = 0;
+	u32 value = 0;
+	u32 gpio_output = 0;
+	u32 gpio_value;
+	u32 checksum = 0;
+	u32 *dataptr;
+
+	dprintk(2, "%s()\n", __func__);
+
+	/* Save GPIO settings before reset of APU */
+	retval |= mc417_memory_read(dev, 0x9020, &gpio_output);
+	retval |= mc417_memory_read(dev, 0x900C, &gpio_value);
+
+	retval  = mc417_register_write(dev,
+		IVTV_REG_VPU, 0xFFFFFFED);
+	retval |= mc417_register_write(dev,
+		IVTV_REG_HW_BLOCKS, IVTV_CMD_HW_BLOCKS_RST);
+	retval |= mc417_register_write(dev,
+		IVTV_REG_ENC_SDRAM_REFRESH, 0x80000800);
+	retval |= mc417_register_write(dev,
+		IVTV_REG_ENC_SDRAM_PRECHARGE, 0x1A);
+	retval |= mc417_register_write(dev,
+		IVTV_REG_APU, 0);
+
+	if (retval != 0) {
+		printk(KERN_ERR "%s: Error with mc417_register_write\n",
+			__func__);
+		return -1;
+	}
+
+	retval = request_firmware(&firmware, CX23885_FIRM_IMAGE_NAME,
+				  &dev->pci->dev);
+
+	if (retval != 0) {
+		printk(KERN_ERR
+			"ERROR: Hotplug firmware request failed (%s).\n",
+			CX23885_FIRM_IMAGE_NAME);
+		printk(KERN_ERR "Please fix your hotplug setup, the board will "
+			"not work without firmware loaded!\n");
+		return -1;
+	}
+
+	if (firmware->size != CX23885_FIRM_IMAGE_SIZE) {
+		printk(KERN_ERR "ERROR: Firmware size mismatch "
+			"(have %zd, expected %d)\n",
+			firmware->size, CX23885_FIRM_IMAGE_SIZE);
+		release_firmware(firmware);
+		return -1;
+	}
+
+	if (0 != memcmp(firmware->data, magic, 8)) {
+		printk(KERN_ERR
+			"ERROR: Firmware magic mismatch, wrong file?\n");
+		release_firmware(firmware);
+		return -1;
+	}
+
+	/* transfer to the chip */
+	dprintk(2, "Loading firmware ...\n");
+	dataptr = (u32 *)firmware->data;
+	for (i = 0; i < (firmware->size >> 2); i++) {
+		value = *dataptr;
+		checksum += ~value;
+		if (mc417_memory_write(dev, i, value) != 0) {
+			printk(KERN_ERR "ERROR: Loading firmware failed!\n");
+			release_firmware(firmware);
+			return -1;
+		}
+		dataptr++;
+	}
+
+	/* read back to verify with the checksum */
+	dprintk(1, "Verifying firmware ...\n");
+	for (i--; i >= 0; i--) {
+		if (mc417_memory_read(dev, i, &value) != 0) {
+			printk(KERN_ERR "ERROR: Reading firmware failed!\n");
+			release_firmware(firmware);
+			return -1;
+		}
+		checksum -= ~value;
+	}
+	if (checksum) {
+		printk(KERN_ERR
+			"ERROR: Firmware load failed (checksum mismatch).\n");
+		release_firmware(firmware);
+		return -1;
+	}
+	release_firmware(firmware);
+	dprintk(1, "Firmware upload successful.\n");
+
+	retval |= mc417_register_write(dev, IVTV_REG_HW_BLOCKS,
+		IVTV_CMD_HW_BLOCKS_RST);
+
+	/* F/W power up disturbs the GPIOs, restore state */
+	retval |= mc417_register_write(dev, 0x9020, gpio_output);
+	retval |= mc417_register_write(dev, 0x900C, gpio_value);
+
+	retval |= mc417_register_read(dev, IVTV_REG_VPU, &value);
+	retval |= mc417_register_write(dev, IVTV_REG_VPU, value & 0xFFFFFFE8);
+
+	/* Hardcoded GPIO's here */
+	retval |= mc417_register_write(dev, 0x9020, 0x4000);
+	retval |= mc417_register_write(dev, 0x900C, 0x4000);
+
+	mc417_register_read(dev, 0x9020, &gpio_output);
+	mc417_register_read(dev, 0x900C, &gpio_value);
+
+	if (retval < 0)
+		printk(KERN_ERR "%s: Error with mc417_register_write\n",
+			__func__);
+	return 0;
+}
+
+void cx23885_417_check_encoder(struct cx23885_dev *dev)
+{
+	u32 status, seq;
+
+	status = seq = 0;
+	cx23885_api_cmd(dev, CX2341X_ENC_GET_SEQ_END, 0, 2, &status, &seq);
+	dprintk(1, "%s() status = %d, seq = %d\n", __func__, status, seq);
+}
+
+static void cx23885_codec_settings(struct cx23885_dev *dev)
+{
+	dprintk(1, "%s()\n", __func__);
+
+	/* Dynamically change the height based on video standard */
+	if (dev->encodernorm.id & V4L2_STD_525_60)
+		dev->ts1.height = 480;
+	else
+		dev->ts1.height = 576;
+
+	/* assign frame size */
+	cx23885_api_cmd(dev, CX2341X_ENC_SET_FRAME_SIZE, 2, 0,
+				dev->ts1.height, dev->ts1.width);
+
+	dev->mpeg_params.width = dev->ts1.width;
+	dev->mpeg_params.height = dev->ts1.height;
+	dev->mpeg_params.is_50hz =
+		(dev->encodernorm.id & V4L2_STD_625_50) != 0;
+
+	cx2341x_update(dev, cx23885_mbox_func, NULL, &dev->mpeg_params);
+
+	cx23885_api_cmd(dev, CX2341X_ENC_MISC, 2, 0, 3, 1);
+	cx23885_api_cmd(dev, CX2341X_ENC_MISC, 2, 0, 4, 1);
+}
+
+static int cx23885_initialize_codec(struct cx23885_dev *dev, int startencoder)
+{
+	int version;
+	int retval;
+	u32 i, data[7];
+
+	dprintk(1, "%s()\n", __func__);
+
+	retval = cx23885_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0); /* ping */
+	if (retval < 0) {
+		dprintk(2, "%s() PING OK\n", __func__);
+		retval = cx23885_load_firmware(dev);
+		if (retval < 0) {
+			printk(KERN_ERR "%s() f/w load failed\n", __func__);
+			return retval;
+		}
+		retval = cx23885_find_mailbox(dev);
+		if (retval < 0) {
+			printk(KERN_ERR "%s() mailbox < 0, error\n",
+				__func__);
+			return -1;
+		}
+		dev->cx23417_mailbox = retval;
+		retval = cx23885_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0);
+		if (retval < 0) {
+			printk(KERN_ERR
+				"ERROR: cx23417 firmware ping failed!\n");
+			return -1;
+		}
+		retval = cx23885_api_cmd(dev, CX2341X_ENC_GET_VERSION, 0, 1,
+			&version);
+		if (retval < 0) {
+			printk(KERN_ERR "ERROR: cx23417 firmware get encoder :"
+				"version failed!\n");
+			return -1;
+		}
+		dprintk(1, "cx23417 firmware version is 0x%08x\n", version);
+		msleep(200);
+	}
+
+	cx23885_codec_settings(dev);
+	msleep(60);
+
+	cx23885_api_cmd(dev, CX2341X_ENC_SET_NUM_VSYNC_LINES, 2, 0,
+		CX23885_FIELD1_SAA7115, CX23885_FIELD2_SAA7115);
+	cx23885_api_cmd(dev, CX2341X_ENC_SET_PLACEHOLDER, 12, 0,
+		CX23885_CUSTOM_EXTENSION_USR_DATA, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0);
+
+	/* Setup to capture VBI */
+	data[0] = 0x0001BD00;
+	data[1] = 1;          /* frames per interrupt */
+	data[2] = 4;          /* total bufs */
+	data[3] = 0x91559155; /* start codes */
+	data[4] = 0x206080C0; /* stop codes */
+	data[5] = 6;          /* lines */
+	data[6] = 64;         /* BPL */
+
+	cx23885_api_cmd(dev, CX2341X_ENC_SET_VBI_CONFIG, 7, 0, data[0], data[1],
+		data[2], data[3], data[4], data[5], data[6]);
+
+	for (i = 2; i <= 24; i++) {
+		int valid;
+
+		valid = ((i >= 19) && (i <= 21));
+		cx23885_api_cmd(dev, CX2341X_ENC_SET_VBI_LINE, 5, 0, i,
+				valid, 0 , 0, 0);
+		cx23885_api_cmd(dev, CX2341X_ENC_SET_VBI_LINE, 5, 0,
+				i | 0x80000000, valid, 0, 0, 0);
+	}
+
+	cx23885_api_cmd(dev, CX2341X_ENC_MUTE_AUDIO, 1, 0, CX23885_UNMUTE);
+	msleep(60);
+
+	/* initialize the video input */
+	cx23885_api_cmd(dev, CX2341X_ENC_INITIALIZE_INPUT, 0, 0);
+	msleep(60);
+
+	/* Enable VIP style pixel invalidation so we work with scaled mode */
+	mc417_memory_write(dev, 2120, 0x00000080);
+
+	/* start capturing to the host interface */
+	if (startencoder) {
+		cx23885_api_cmd(dev, CX2341X_ENC_START_CAPTURE, 2, 0,
+			CX23885_MPEG_CAPTURE, CX23885_RAW_BITS_NONE);
+		msleep(10);
+	}
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+static int bb_buf_setup(struct videobuf_queue *q,
+	unsigned int *count, unsigned int *size)
+{
+	struct cx23885_fh *fh = q->priv_data;
+
+	fh->dev->ts1.ts_packet_size  = mpeglinesize;
+	fh->dev->ts1.ts_packet_count = mpeglines;
+
+	*size = fh->dev->ts1.ts_packet_size * fh->dev->ts1.ts_packet_count;
+	*count = mpegbufs;
+
+	return 0;
+}
+
+static int bb_buf_prepare(struct videobuf_queue *q,
+	struct videobuf_buffer *vb, enum v4l2_field field)
+{
+	struct cx23885_fh *fh = q->priv_data;
+	return cx23885_buf_prepare(q, &fh->dev->ts1,
+		(struct cx23885_buffer *)vb,
+		field);
+}
+
+static void bb_buf_queue(struct videobuf_queue *q,
+	struct videobuf_buffer *vb)
+{
+	struct cx23885_fh *fh = q->priv_data;
+	cx23885_buf_queue(&fh->dev->ts1, (struct cx23885_buffer *)vb);
+}
+
+static void bb_buf_release(struct videobuf_queue *q,
+	struct videobuf_buffer *vb)
+{
+	cx23885_free_buffer(q, (struct cx23885_buffer *)vb);
+}
+
+static struct videobuf_queue_ops cx23885_qops = {
+	.buf_setup    = bb_buf_setup,
+	.buf_prepare  = bb_buf_prepare,
+	.buf_queue    = bb_buf_queue,
+	.buf_release  = bb_buf_release,
+};
+
+/* ------------------------------------------------------------------ */
+
+static const u32 *ctrl_classes[] = {
+	cx2341x_mpeg_ctrls,
+	NULL
+};
+
+static int cx23885_queryctrl(struct cx23885_dev *dev,
+	struct v4l2_queryctrl *qctrl)
+{
+	qctrl->id = v4l2_ctrl_next(ctrl_classes, qctrl->id);
+	if (qctrl->id == 0)
+		return -EINVAL;
+
+	/* MPEG V4L2 controls */
+	if (cx2341x_ctrl_query(&dev->mpeg_params, qctrl))
+		qctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
+
+	return 0;
+}
+
+static int cx23885_querymenu(struct cx23885_dev *dev,
+	struct v4l2_querymenu *qmenu)
+{
+	struct v4l2_queryctrl qctrl;
+
+	qctrl.id = qmenu->id;
+	cx23885_queryctrl(dev, &qctrl);
+	return v4l2_ctrl_query_menu(qmenu, &qctrl,
+		cx2341x_ctrl_get_menu(&dev->mpeg_params, qmenu->id));
+}
+
+static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *id)
+{
+	struct cx23885_fh  *fh  = file->private_data;
+	struct cx23885_dev *dev = fh->dev;
+
+	call_all(dev, core, g_std, id);
+
+	return 0;
+}
+
+static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *id)
+{
+	struct cx23885_fh  *fh  = file->private_data;
+	struct cx23885_dev *dev = fh->dev;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(cx23885_tvnorms); i++)
+		if (*id & cx23885_tvnorms[i].id)
+			break;
+	if (i == ARRAY_SIZE(cx23885_tvnorms))
+		return -EINVAL;
+	dev->encodernorm = cx23885_tvnorms[i];
+
+	/* Have the drier core notify the subdevices */
+	mutex_lock(&dev->lock);
+	cx23885_set_tvnorm(dev, *id);
+	mutex_unlock(&dev->lock);
+
+	return 0;
+}
+
+static int vidioc_enum_input(struct file *file, void *priv,
+	struct v4l2_input *i)
+{
+	struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev;
+	dprintk(1, "%s()\n", __func__);
+	return cx23885_enum_input(dev, i);
+}
+
+static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
+{
+	return cx23885_get_input(file, priv, i);
+}
+
+static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
+{
+	return cx23885_set_input(file, priv, i);
+}
+
+static int vidioc_g_tuner(struct file *file, void *priv,
+				struct v4l2_tuner *t)
+{
+	struct cx23885_fh  *fh  = file->private_data;
+	struct cx23885_dev *dev = fh->dev;
+
+	if (UNSET == dev->tuner_type)
+		return -EINVAL;
+	if (0 != t->index)
+		return -EINVAL;
+	strcpy(t->name, "Television");
+	call_all(dev, tuner, g_tuner, t);
+
+	dprintk(1, "VIDIOC_G_TUNER: tuner type %d\n", t->type);
+
+	return 0;
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+				struct v4l2_tuner *t)
+{
+	struct cx23885_fh  *fh  = file->private_data;
+	struct cx23885_dev *dev = fh->dev;
+
+	if (UNSET == dev->tuner_type)
+		return -EINVAL;
+
+	/* Update the A/V core */
+	call_all(dev, tuner, s_tuner, t);
+
+	return 0;
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *f)
+{
+	struct cx23885_fh  *fh  = file->private_data;
+	struct cx23885_dev *dev = fh->dev;
+
+	if (UNSET == dev->tuner_type)
+		return -EINVAL;
+	f->type = V4L2_TUNER_ANALOG_TV;
+	f->frequency = dev->freq;
+
+	call_all(dev, tuner, g_frequency, f);
+
+	return 0;
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+	struct v4l2_frequency *f)
+{
+	return cx23885_set_frequency(file, priv, f);
+}
+
+static int vidioc_g_ctrl(struct file *file, void *priv,
+	struct v4l2_control *ctl)
+{
+	struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev;
+
+	return cx23885_get_control(dev, ctl);
+}
+
+static int vidioc_s_ctrl(struct file *file, void *priv,
+	struct v4l2_control *ctl)
+{
+	struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev;
+
+	return cx23885_set_control(dev, ctl);
+}
+
+static int vidioc_querycap(struct file *file, void  *priv,
+				struct v4l2_capability *cap)
+{
+	struct cx23885_fh  *fh  = file->private_data;
+	struct cx23885_dev *dev = fh->dev;
+	struct cx23885_tsport  *tsport = &dev->ts1;
+
+	strlcpy(cap->driver, dev->name, sizeof(cap->driver));
+	strlcpy(cap->card, cx23885_boards[tsport->dev->board].name,
+		sizeof(cap->card));
+	sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci));
+	cap->capabilities =
+		V4L2_CAP_VIDEO_CAPTURE |
+		V4L2_CAP_READWRITE     |
+		V4L2_CAP_STREAMING     |
+		0;
+	if (UNSET != dev->tuner_type)
+		cap->capabilities |= V4L2_CAP_TUNER;
+
+	return 0;
+}
+
+static int vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,
+					struct v4l2_fmtdesc *f)
+{
+	if (f->index != 0)
+		return -EINVAL;
+
+	strlcpy(f->description, "MPEG", sizeof(f->description));
+	f->pixelformat = V4L2_PIX_FMT_MPEG;
+
+	return 0;
+}
+
+static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct cx23885_fh  *fh  = file->private_data;
+	struct cx23885_dev *dev = fh->dev;
+
+	f->fmt.pix.pixelformat  = V4L2_PIX_FMT_MPEG;
+	f->fmt.pix.bytesperline = 0;
+	f->fmt.pix.sizeimage    =
+		dev->ts1.ts_packet_size * dev->ts1.ts_packet_count;
+	f->fmt.pix.colorspace   = 0;
+	f->fmt.pix.width        = dev->ts1.width;
+	f->fmt.pix.height       = dev->ts1.height;
+	f->fmt.pix.field        = fh->mpegq.field;
+	dprintk(1, "VIDIOC_G_FMT: w: %d, h: %d, f: %d\n",
+		dev->ts1.width, dev->ts1.height, fh->mpegq.field);
+	return 0;
+}
+
+static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct cx23885_fh  *fh  = file->private_data;
+	struct cx23885_dev *dev = fh->dev;
+
+	f->fmt.pix.pixelformat  = V4L2_PIX_FMT_MPEG;
+	f->fmt.pix.bytesperline = 0;
+	f->fmt.pix.sizeimage    =
+		dev->ts1.ts_packet_size * dev->ts1.ts_packet_count;
+	f->fmt.pix.colorspace   = 0;
+	dprintk(1, "VIDIOC_TRY_FMT: w: %d, h: %d, f: %d\n",
+		dev->ts1.width, dev->ts1.height, fh->mpegq.field);
+	return 0;
+}
+
+static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct cx23885_fh  *fh  = file->private_data;
+	struct cx23885_dev *dev = fh->dev;
+
+	f->fmt.pix.pixelformat  = V4L2_PIX_FMT_MPEG;
+	f->fmt.pix.bytesperline = 0;
+	f->fmt.pix.sizeimage    =
+		dev->ts1.ts_packet_size * dev->ts1.ts_packet_count;
+	f->fmt.pix.colorspace   = 0;
+	dprintk(1, "VIDIOC_S_FMT: w: %d, h: %d, f: %d\n",
+		f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.field);
+	return 0;
+}
+
+static int vidioc_reqbufs(struct file *file, void *priv,
+				struct v4l2_requestbuffers *p)
+{
+	struct cx23885_fh  *fh  = file->private_data;
+
+	return videobuf_reqbufs(&fh->mpegq, p);
+}
+
+static int vidioc_querybuf(struct file *file, void *priv,
+				struct v4l2_buffer *p)
+{
+	struct cx23885_fh  *fh  = file->private_data;
+
+	return videobuf_querybuf(&fh->mpegq, p);
+}
+
+static int vidioc_qbuf(struct file *file, void *priv,
+				struct v4l2_buffer *p)
+{
+	struct cx23885_fh  *fh  = file->private_data;
+
+	return videobuf_qbuf(&fh->mpegq, p);
+}
+
+static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
+{
+	struct cx23885_fh  *fh  = priv;
+
+	return videobuf_dqbuf(&fh->mpegq, b, file->f_flags & O_NONBLOCK);
+}
+
+
+static int vidioc_streamon(struct file *file, void *priv,
+				enum v4l2_buf_type i)
+{
+	struct cx23885_fh  *fh  = file->private_data;
+
+	return videobuf_streamon(&fh->mpegq);
+}
+
+static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
+{
+	struct cx23885_fh  *fh  = file->private_data;
+
+	return videobuf_streamoff(&fh->mpegq);
+}
+
+static int vidioc_g_ext_ctrls(struct file *file, void *priv,
+				struct v4l2_ext_controls *f)
+{
+	struct cx23885_fh  *fh  = priv;
+	struct cx23885_dev *dev = fh->dev;
+
+	if (f->ctrl_class != V4L2_CTRL_CLASS_MPEG)
+		return -EINVAL;
+	return cx2341x_ext_ctrls(&dev->mpeg_params, 0, f, VIDIOC_G_EXT_CTRLS);
+}
+
+static int vidioc_s_ext_ctrls(struct file *file, void *priv,
+				struct v4l2_ext_controls *f)
+{
+	struct cx23885_fh  *fh  = priv;
+	struct cx23885_dev *dev = fh->dev;
+	struct cx2341x_mpeg_params p;
+	int err;
+
+	if (f->ctrl_class != V4L2_CTRL_CLASS_MPEG)
+		return -EINVAL;
+
+	p = dev->mpeg_params;
+	err = cx2341x_ext_ctrls(&p, 0, f, VIDIOC_S_EXT_CTRLS);
+
+	if (err == 0) {
+		err = cx2341x_update(dev, cx23885_mbox_func,
+			&dev->mpeg_params, &p);
+		dev->mpeg_params = p;
+	}
+	return err;
+}
+
+static int vidioc_try_ext_ctrls(struct file *file, void *priv,
+				struct v4l2_ext_controls *f)
+{
+	struct cx23885_fh  *fh  = priv;
+	struct cx23885_dev *dev = fh->dev;
+	struct cx2341x_mpeg_params p;
+	int err;
+
+	if (f->ctrl_class != V4L2_CTRL_CLASS_MPEG)
+		return -EINVAL;
+
+	p = dev->mpeg_params;
+	err = cx2341x_ext_ctrls(&p, 0, f, VIDIOC_TRY_EXT_CTRLS);
+	return err;
+}
+
+static int vidioc_log_status(struct file *file, void *priv)
+{
+	struct cx23885_fh  *fh  = priv;
+	struct cx23885_dev *dev = fh->dev;
+	char name[32 + 2];
+
+	snprintf(name, sizeof(name), "%s/2", dev->name);
+	printk(KERN_INFO
+		"%s/2: ============  START LOG STATUS  ============\n",
+	       dev->name);
+	call_all(dev, core, log_status);
+	cx2341x_log_status(&dev->mpeg_params, name);
+	printk(KERN_INFO
+		"%s/2: =============  END LOG STATUS  =============\n",
+	       dev->name);
+	return 0;
+}
+
+static int vidioc_querymenu(struct file *file, void *priv,
+				struct v4l2_querymenu *a)
+{
+	struct cx23885_fh  *fh  = priv;
+	struct cx23885_dev *dev = fh->dev;
+
+	return cx23885_querymenu(dev, a);
+}
+
+static int vidioc_queryctrl(struct file *file, void *priv,
+				struct v4l2_queryctrl *c)
+{
+	struct cx23885_fh  *fh  = priv;
+	struct cx23885_dev *dev = fh->dev;
+
+	return cx23885_queryctrl(dev, c);
+}
+
+static int mpeg_open(struct file *file)
+{
+	struct cx23885_dev *dev = video_drvdata(file);
+	struct cx23885_fh *fh;
+
+	dprintk(2, "%s()\n", __func__);
+
+	/* allocate + initialize per filehandle data */
+	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
+	if (!fh)
+		return -ENOMEM;
+
+	file->private_data = fh;
+	fh->dev      = dev;
+
+	videobuf_queue_sg_init(&fh->mpegq, &cx23885_qops,
+			    &dev->pci->dev, &dev->ts1.slock,
+			    V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			    V4L2_FIELD_INTERLACED,
+			    sizeof(struct cx23885_buffer),
+			    fh, NULL);
+	return 0;
+}
+
+static int mpeg_release(struct file *file)
+{
+	struct cx23885_fh  *fh  = file->private_data;
+	struct cx23885_dev *dev = fh->dev;
+
+	dprintk(2, "%s()\n", __func__);
+
+	/* FIXME: Review this crap */
+	/* Shut device down on last close */
+	if (atomic_cmpxchg(&fh->v4l_reading, 1, 0) == 1) {
+		if (atomic_dec_return(&dev->v4l_reader_count) == 0) {
+			/* stop mpeg capture */
+			cx23885_api_cmd(fh->dev, CX2341X_ENC_STOP_CAPTURE, 3, 0,
+				CX23885_END_NOW, CX23885_MPEG_CAPTURE,
+				CX23885_RAW_BITS_NONE);
+
+			msleep(500);
+			cx23885_417_check_encoder(dev);
+
+			cx23885_cancel_buffers(&fh->dev->ts1);
+		}
+	}
+
+	if (fh->mpegq.streaming)
+		videobuf_streamoff(&fh->mpegq);
+	if (fh->mpegq.reading)
+		videobuf_read_stop(&fh->mpegq);
+
+	videobuf_mmap_free(&fh->mpegq);
+	file->private_data = NULL;
+	kfree(fh);
+
+	return 0;
+}
+
+static ssize_t mpeg_read(struct file *file, char __user *data,
+	size_t count, loff_t *ppos)
+{
+	struct cx23885_fh *fh = file->private_data;
+	struct cx23885_dev *dev = fh->dev;
+
+	dprintk(2, "%s()\n", __func__);
+
+	/* Deal w/ A/V decoder * and mpeg encoder sync issues. */
+	/* Start mpeg encoder on first read. */
+	if (atomic_cmpxchg(&fh->v4l_reading, 0, 1) == 0) {
+		if (atomic_inc_return(&dev->v4l_reader_count) == 1) {
+			if (cx23885_initialize_codec(dev, 1) < 0)
+				return -EINVAL;
+		}
+	}
+
+	return videobuf_read_stream(&fh->mpegq, data, count, ppos, 0,
+				    file->f_flags & O_NONBLOCK);
+}
+
+static unsigned int mpeg_poll(struct file *file,
+	struct poll_table_struct *wait)
+{
+	struct cx23885_fh *fh = file->private_data;
+	struct cx23885_dev *dev = fh->dev;
+
+	dprintk(2, "%s\n", __func__);
+
+	return videobuf_poll_stream(file, &fh->mpegq, wait);
+}
+
+static int mpeg_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct cx23885_fh *fh = file->private_data;
+	struct cx23885_dev *dev = fh->dev;
+
+	dprintk(2, "%s()\n", __func__);
+
+	return videobuf_mmap_mapper(&fh->mpegq, vma);
+}
+
+static struct v4l2_file_operations mpeg_fops = {
+	.owner	       = THIS_MODULE,
+	.open	       = mpeg_open,
+	.release       = mpeg_release,
+	.read	       = mpeg_read,
+	.poll          = mpeg_poll,
+	.mmap	       = mpeg_mmap,
+	.ioctl	       = video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops mpeg_ioctl_ops = {
+	.vidioc_querystd	 = vidioc_g_std,
+	.vidioc_g_std		 = vidioc_g_std,
+	.vidioc_s_std		 = vidioc_s_std,
+	.vidioc_enum_input	 = vidioc_enum_input,
+	.vidioc_g_input		 = vidioc_g_input,
+	.vidioc_s_input		 = vidioc_s_input,
+	.vidioc_g_tuner		 = vidioc_g_tuner,
+	.vidioc_s_tuner		 = vidioc_s_tuner,
+	.vidioc_g_frequency	 = vidioc_g_frequency,
+	.vidioc_s_frequency	 = vidioc_s_frequency,
+	.vidioc_s_ctrl		 = vidioc_s_ctrl,
+	.vidioc_g_ctrl		 = vidioc_g_ctrl,
+	.vidioc_querycap	 = vidioc_querycap,
+	.vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap	 = vidioc_g_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap	 = vidioc_try_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap	 = vidioc_s_fmt_vid_cap,
+	.vidioc_reqbufs		 = vidioc_reqbufs,
+	.vidioc_querybuf	 = vidioc_querybuf,
+	.vidioc_qbuf		 = vidioc_qbuf,
+	.vidioc_dqbuf		 = vidioc_dqbuf,
+	.vidioc_streamon	 = vidioc_streamon,
+	.vidioc_streamoff	 = vidioc_streamoff,
+	.vidioc_g_ext_ctrls	 = vidioc_g_ext_ctrls,
+	.vidioc_s_ext_ctrls	 = vidioc_s_ext_ctrls,
+	.vidioc_try_ext_ctrls	 = vidioc_try_ext_ctrls,
+	.vidioc_log_status	 = vidioc_log_status,
+	.vidioc_querymenu	 = vidioc_querymenu,
+	.vidioc_queryctrl	 = vidioc_queryctrl,
+	.vidioc_g_chip_ident	 = cx23885_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_register	 = cx23885_g_register,
+	.vidioc_s_register	 = cx23885_s_register,
+#endif
+};
+
+static struct video_device cx23885_mpeg_template = {
+	.name          = "cx23885",
+	.fops          = &mpeg_fops,
+	.ioctl_ops     = &mpeg_ioctl_ops,
+	.tvnorms       = CX23885_NORMS,
+	.current_norm  = V4L2_STD_NTSC_M,
+};
+
+void cx23885_417_unregister(struct cx23885_dev *dev)
+{
+	dprintk(1, "%s()\n", __func__);
+
+	if (dev->v4l_device) {
+		if (video_is_registered(dev->v4l_device))
+			video_unregister_device(dev->v4l_device);
+		else
+			video_device_release(dev->v4l_device);
+		dev->v4l_device = NULL;
+	}
+}
+
+static struct video_device *cx23885_video_dev_alloc(
+	struct cx23885_tsport *tsport,
+	struct pci_dev *pci,
+	struct video_device *template,
+	char *type)
+{
+	struct video_device *vfd;
+	struct cx23885_dev *dev = tsport->dev;
+
+	dprintk(1, "%s()\n", __func__);
+
+	vfd = video_device_alloc();
+	if (NULL == vfd)
+		return NULL;
+	*vfd = *template;
+	snprintf(vfd->name, sizeof(vfd->name), "%s (%s)",
+		cx23885_boards[tsport->dev->board].name, type);
+	vfd->parent  = &pci->dev;
+	vfd->release = video_device_release;
+	return vfd;
+}
+
+int cx23885_417_register(struct cx23885_dev *dev)
+{
+	/* FIXME: Port1 hardcoded here */
+	int err = -ENODEV;
+	struct cx23885_tsport *tsport = &dev->ts1;
+
+	dprintk(1, "%s()\n", __func__);
+
+	if (cx23885_boards[dev->board].portb != CX23885_MPEG_ENCODER)
+		return err;
+
+	/* Set default TV standard */
+	dev->encodernorm = cx23885_tvnorms[0];
+
+	if (dev->encodernorm.id & V4L2_STD_525_60)
+		tsport->height = 480;
+	else
+		tsport->height = 576;
+
+	tsport->width = 720;
+	cx2341x_fill_defaults(&dev->mpeg_params);
+
+	dev->mpeg_params.port = CX2341X_PORT_SERIAL;
+
+	/* Allocate and initialize V4L video device */
+	dev->v4l_device = cx23885_video_dev_alloc(tsport,
+		dev->pci, &cx23885_mpeg_template, "mpeg");
+	video_set_drvdata(dev->v4l_device, dev);
+	err = video_register_device(dev->v4l_device,
+		VFL_TYPE_GRABBER, -1);
+	if (err < 0) {
+		printk(KERN_INFO "%s: can't register mpeg device\n", dev->name);
+		return err;
+	}
+
+	printk(KERN_INFO "%s: registered device %s [mpeg]\n",
+	       dev->name, video_device_node_name(dev->v4l_device));
+
+	/* ST: Configure the encoder paramaters, but don't begin
+	 * encoding, this resolves an issue where the first time the
+	 * encoder is started video can be choppy.
+	 */
+	cx23885_initialize_codec(dev, 0);
+
+	return 0;
+}
+
+MODULE_FIRMWARE(CX23885_FIRM_IMAGE_NAME);
diff --git a/drivers/media/pci/cx23885/cx23885-alsa.c b/drivers/media/pci/cx23885/cx23885-alsa.c
new file mode 100644
index 0000000..7951692
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-alsa.c
@@ -0,0 +1,535 @@
+/*
+ *
+ *  Support for CX23885 analog audio capture
+ *
+ *    (c) 2008 Mijhail Moreyra <mijhail.moreyra@gmail.com>
+ *    Adapted from cx88-alsa.c
+ *    (c) 2009 Steven Toth <stoth@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/vmalloc.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+
+#include <asm/delay.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/control.h>
+#include <sound/initval.h>
+
+#include <sound/tlv.h>
+
+
+#include "cx23885.h"
+#include "cx23885-reg.h"
+
+#define AUDIO_SRAM_CHANNEL	SRAM_CH07
+
+#define dprintk(level, fmt, arg...)	if (audio_debug >= level) \
+	printk(KERN_INFO "%s: " fmt, chip->dev->name , ## arg)
+
+#define dprintk_core(level, fmt, arg...)	if (audio_debug >= level) \
+	printk(KERN_DEBUG "%s: " fmt, chip->dev->name , ## arg)
+
+/****************************************************************************
+			Module global static vars
+ ****************************************************************************/
+
+static unsigned int disable_analog_audio;
+module_param(disable_analog_audio, int, 0644);
+MODULE_PARM_DESC(disable_analog_audio, "disable analog audio ALSA driver");
+
+static unsigned int audio_debug;
+module_param(audio_debug, int, 0644);
+MODULE_PARM_DESC(audio_debug, "enable debug messages [analog audio]");
+
+/****************************************************************************
+			Board specific funtions
+ ****************************************************************************/
+
+/* Constants taken from cx88-reg.h */
+#define AUD_INT_DN_RISCI1       (1 <<  0)
+#define AUD_INT_UP_RISCI1       (1 <<  1)
+#define AUD_INT_RDS_DN_RISCI1   (1 <<  2)
+#define AUD_INT_DN_RISCI2       (1 <<  4) /* yes, 3 is skipped */
+#define AUD_INT_UP_RISCI2       (1 <<  5)
+#define AUD_INT_RDS_DN_RISCI2   (1 <<  6)
+#define AUD_INT_DN_SYNC         (1 << 12)
+#define AUD_INT_UP_SYNC         (1 << 13)
+#define AUD_INT_RDS_DN_SYNC     (1 << 14)
+#define AUD_INT_OPC_ERR         (1 << 16)
+#define AUD_INT_BER_IRQ         (1 << 20)
+#define AUD_INT_MCHG_IRQ        (1 << 21)
+#define GP_COUNT_CONTROL_RESET	0x3
+
+/*
+ * BOARD Specific: Sets audio DMA
+ */
+
+static int cx23885_start_audio_dma(struct cx23885_audio_dev *chip)
+{
+	struct cx23885_audio_buffer *buf = chip->buf;
+	struct cx23885_dev *dev  = chip->dev;
+	struct sram_channel *audio_ch =
+		&dev->sram_channels[AUDIO_SRAM_CHANNEL];
+
+	dprintk(1, "%s()\n", __func__);
+
+	/* Make sure RISC/FIFO are off before changing FIFO/RISC settings */
+	cx_clear(AUD_INT_DMA_CTL, 0x11);
+
+	/* setup fifo + format - out channel */
+	cx23885_sram_channel_setup(chip->dev, audio_ch, buf->bpl,
+		buf->risc.dma);
+
+	/* sets bpl size */
+	cx_write(AUD_INT_A_LNGTH, buf->bpl);
+
+	/* This is required to get good audio (1 seems to be ok) */
+	cx_write(AUD_INT_A_MODE, 1);
+
+	/* reset counter */
+	cx_write(AUD_INT_A_GPCNT_CTL, GP_COUNT_CONTROL_RESET);
+	atomic_set(&chip->count, 0);
+
+	dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d "
+		"byte buffer\n", buf->bpl, cx_read(audio_ch->cmds_start+12)>>1,
+		chip->num_periods, buf->bpl * chip->num_periods);
+
+	/* Enables corresponding bits at AUD_INT_STAT */
+	cx_write(AUDIO_INT_INT_MSK, AUD_INT_OPC_ERR | AUD_INT_DN_SYNC |
+				    AUD_INT_DN_RISCI1);
+
+	/* Clean any pending interrupt bits already set */
+	cx_write(AUDIO_INT_INT_STAT, ~0);
+
+	/* enable audio irqs */
+	cx_set(PCI_INT_MSK, chip->dev->pci_irqmask | PCI_MSK_AUD_INT);
+
+	/* start dma */
+	cx_set(DEV_CNTRL2, (1<<5)); /* Enables Risc Processor */
+	cx_set(AUD_INT_DMA_CTL, 0x11); /* audio downstream FIFO and
+					  RISC enable */
+	if (audio_debug)
+		cx23885_sram_channel_dump(chip->dev, audio_ch);
+
+	return 0;
+}
+
+/*
+ * BOARD Specific: Resets audio DMA
+ */
+static int cx23885_stop_audio_dma(struct cx23885_audio_dev *chip)
+{
+	struct cx23885_dev *dev = chip->dev;
+	dprintk(1, "Stopping audio DMA\n");
+
+	/* stop dma */
+	cx_clear(AUD_INT_DMA_CTL, 0x11);
+
+	/* disable irqs */
+	cx_clear(PCI_INT_MSK, PCI_MSK_AUD_INT);
+	cx_clear(AUDIO_INT_INT_MSK, AUD_INT_OPC_ERR | AUD_INT_DN_SYNC |
+				    AUD_INT_DN_RISCI1);
+
+	if (audio_debug)
+		cx23885_sram_channel_dump(chip->dev,
+			&dev->sram_channels[AUDIO_SRAM_CHANNEL]);
+
+	return 0;
+}
+
+/*
+ * BOARD Specific: Handles audio IRQ
+ */
+int cx23885_audio_irq(struct cx23885_dev *dev, u32 status, u32 mask)
+{
+	struct cx23885_audio_dev *chip = dev->audio_dev;
+
+	if (0 == (status & mask))
+		return 0;
+
+	cx_write(AUDIO_INT_INT_STAT, status);
+
+	/* risc op code error */
+	if (status & AUD_INT_OPC_ERR) {
+		printk(KERN_WARNING "%s/1: Audio risc op code error\n",
+			dev->name);
+		cx_clear(AUD_INT_DMA_CTL, 0x11);
+		cx23885_sram_channel_dump(dev,
+			&dev->sram_channels[AUDIO_SRAM_CHANNEL]);
+	}
+	if (status & AUD_INT_DN_SYNC) {
+		dprintk(1, "Downstream sync error\n");
+		cx_write(AUD_INT_A_GPCNT_CTL, GP_COUNT_CONTROL_RESET);
+		return 1;
+	}
+	/* risc1 downstream */
+	if (status & AUD_INT_DN_RISCI1) {
+		atomic_set(&chip->count, cx_read(AUD_INT_A_GPCNT));
+		snd_pcm_period_elapsed(chip->substream);
+	}
+	/* FIXME: Any other status should deserve a special handling? */
+
+	return 1;
+}
+
+static int dsp_buffer_free(struct cx23885_audio_dev *chip)
+{
+	BUG_ON(!chip->dma_size);
+
+	dprintk(2, "Freeing buffer\n");
+	videobuf_dma_unmap(&chip->pci->dev, chip->dma_risc);
+	videobuf_dma_free(chip->dma_risc);
+	btcx_riscmem_free(chip->pci, &chip->buf->risc);
+	kfree(chip->buf);
+
+	chip->dma_risc = NULL;
+	chip->dma_size = 0;
+
+	return 0;
+}
+
+/****************************************************************************
+				ALSA PCM Interface
+ ****************************************************************************/
+
+/*
+ * Digital hardware definition
+ */
+#define DEFAULT_FIFO_SIZE	4096
+
+static struct snd_pcm_hardware snd_cx23885_digital_hw = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP_VALID,
+	.formats = SNDRV_PCM_FMTBIT_S16_LE,
+
+	.rates =		SNDRV_PCM_RATE_48000,
+	.rate_min =		48000,
+	.rate_max =		48000,
+	.channels_min = 2,
+	.channels_max = 2,
+	/* Analog audio output will be full of clicks and pops if there
+	   are not exactly four lines in the SRAM FIFO buffer.  */
+	.period_bytes_min = DEFAULT_FIFO_SIZE/4,
+	.period_bytes_max = DEFAULT_FIFO_SIZE/4,
+	.periods_min = 1,
+	.periods_max = 1024,
+	.buffer_bytes_max = (1024*1024),
+};
+
+/*
+ * audio pcm capture open callback
+ */
+static int snd_cx23885_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	int err;
+
+	if (!chip) {
+		printk(KERN_ERR "BUG: cx23885 can't find device struct."
+				" Can't proceed with open\n");
+		return -ENODEV;
+	}
+
+	err = snd_pcm_hw_constraint_pow2(runtime, 0,
+		SNDRV_PCM_HW_PARAM_PERIODS);
+	if (err < 0)
+		goto _error;
+
+	chip->substream = substream;
+
+	runtime->hw = snd_cx23885_digital_hw;
+
+	if (chip->dev->sram_channels[AUDIO_SRAM_CHANNEL].fifo_size !=
+		DEFAULT_FIFO_SIZE) {
+		unsigned int bpl = chip->dev->
+			sram_channels[AUDIO_SRAM_CHANNEL].fifo_size / 4;
+		bpl &= ~7; /* must be multiple of 8 */
+		runtime->hw.period_bytes_min = bpl;
+		runtime->hw.period_bytes_max = bpl;
+	}
+
+	return 0;
+_error:
+	dprintk(1, "Error opening PCM!\n");
+	return err;
+}
+
+/*
+ * audio close callback
+ */
+static int snd_cx23885_close(struct snd_pcm_substream *substream)
+{
+	return 0;
+}
+
+/*
+ * hw_params callback
+ */
+static int snd_cx23885_hw_params(struct snd_pcm_substream *substream,
+			      struct snd_pcm_hw_params *hw_params)
+{
+	struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream);
+	struct videobuf_dmabuf *dma;
+
+	struct cx23885_audio_buffer *buf;
+	int ret;
+
+	if (substream->runtime->dma_area) {
+		dsp_buffer_free(chip);
+		substream->runtime->dma_area = NULL;
+	}
+
+	chip->period_size = params_period_bytes(hw_params);
+	chip->num_periods = params_periods(hw_params);
+	chip->dma_size = chip->period_size * params_periods(hw_params);
+
+	BUG_ON(!chip->dma_size);
+	BUG_ON(chip->num_periods & (chip->num_periods-1));
+
+	buf = kzalloc(sizeof(*buf), GFP_KERNEL);
+	if (NULL == buf)
+		return -ENOMEM;
+
+	buf->bpl = chip->period_size;
+
+	dma = &buf->dma;
+	videobuf_dma_init(dma);
+	ret = videobuf_dma_init_kernel(dma, PCI_DMA_FROMDEVICE,
+			(PAGE_ALIGN(chip->dma_size) >> PAGE_SHIFT));
+	if (ret < 0)
+		goto error;
+
+	ret = videobuf_dma_map(&chip->pci->dev, dma);
+	if (ret < 0)
+		goto error;
+
+	ret = cx23885_risc_databuffer(chip->pci, &buf->risc, dma->sglist,
+				   chip->period_size, chip->num_periods, 1);
+	if (ret < 0)
+		goto error;
+
+	/* Loop back to start of program */
+	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP|RISC_IRQ1|RISC_CNT_INC);
+	buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
+	buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */
+
+	chip->buf = buf;
+	chip->dma_risc = dma;
+
+	substream->runtime->dma_area = chip->dma_risc->vaddr;
+	substream->runtime->dma_bytes = chip->dma_size;
+	substream->runtime->dma_addr = 0;
+
+	return 0;
+
+error:
+	kfree(buf);
+	return ret;
+}
+
+/*
+ * hw free callback
+ */
+static int snd_cx23885_hw_free(struct snd_pcm_substream *substream)
+{
+
+	struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream);
+
+	if (substream->runtime->dma_area) {
+		dsp_buffer_free(chip);
+		substream->runtime->dma_area = NULL;
+	}
+
+	return 0;
+}
+
+/*
+ * prepare callback
+ */
+static int snd_cx23885_prepare(struct snd_pcm_substream *substream)
+{
+	return 0;
+}
+
+/*
+ * trigger callback
+ */
+static int snd_cx23885_card_trigger(struct snd_pcm_substream *substream,
+	int cmd)
+{
+	struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream);
+	int err;
+
+	/* Local interrupts are already disabled by ALSA */
+	spin_lock(&chip->lock);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		err = cx23885_start_audio_dma(chip);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+		err = cx23885_stop_audio_dma(chip);
+		break;
+	default:
+		err = -EINVAL;
+		break;
+	}
+
+	spin_unlock(&chip->lock);
+
+	return err;
+}
+
+/*
+ * pointer callback
+ */
+static snd_pcm_uframes_t snd_cx23885_pointer(
+	struct snd_pcm_substream *substream)
+{
+	struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	u16 count;
+
+	count = atomic_read(&chip->count);
+
+	return runtime->period_size * (count & (runtime->periods-1));
+}
+
+/*
+ * page callback (needed for mmap)
+ */
+static struct page *snd_cx23885_page(struct snd_pcm_substream *substream,
+				unsigned long offset)
+{
+	void *pageptr = substream->runtime->dma_area + offset;
+	return vmalloc_to_page(pageptr);
+}
+
+/*
+ * operators
+ */
+static struct snd_pcm_ops snd_cx23885_pcm_ops = {
+	.open = snd_cx23885_pcm_open,
+	.close = snd_cx23885_close,
+	.ioctl = snd_pcm_lib_ioctl,
+	.hw_params = snd_cx23885_hw_params,
+	.hw_free = snd_cx23885_hw_free,
+	.prepare = snd_cx23885_prepare,
+	.trigger = snd_cx23885_card_trigger,
+	.pointer = snd_cx23885_pointer,
+	.page = snd_cx23885_page,
+};
+
+/*
+ * create a PCM device
+ */
+static int snd_cx23885_pcm(struct cx23885_audio_dev *chip, int device,
+	char *name)
+{
+	int err;
+	struct snd_pcm *pcm;
+
+	err = snd_pcm_new(chip->card, name, device, 0, 1, &pcm);
+	if (err < 0)
+		return err;
+	pcm->private_data = chip;
+	strcpy(pcm->name, name);
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_cx23885_pcm_ops);
+
+	return 0;
+}
+
+/****************************************************************************
+			Basic Flow for Sound Devices
+ ****************************************************************************/
+
+/*
+ * Alsa Constructor - Component probe
+ */
+
+struct cx23885_audio_dev *cx23885_audio_register(struct cx23885_dev *dev)
+{
+	struct snd_card *card;
+	struct cx23885_audio_dev *chip;
+	int err;
+
+	if (disable_analog_audio)
+		return NULL;
+
+	if (dev->sram_channels[AUDIO_SRAM_CHANNEL].cmds_start == 0) {
+		printk(KERN_WARNING "%s(): Missing SRAM channel configuration "
+			"for analog TV Audio\n", __func__);
+		return NULL;
+	}
+
+	err = snd_card_create(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
+			THIS_MODULE, sizeof(struct cx23885_audio_dev), &card);
+	if (err < 0)
+		goto error;
+
+	chip = (struct cx23885_audio_dev *) card->private_data;
+	chip->dev = dev;
+	chip->pci = dev->pci;
+	chip->card = card;
+	spin_lock_init(&chip->lock);
+
+	snd_card_set_dev(card, &dev->pci->dev);
+
+	err = snd_cx23885_pcm(chip, 0, "CX23885 Digital");
+	if (err < 0)
+		goto error;
+
+	strcpy(card->driver, "CX23885");
+	sprintf(card->shortname, "Conexant CX23885");
+	sprintf(card->longname, "%s at %s", card->shortname, dev->name);
+
+	err = snd_card_register(card);
+	if (err < 0)
+		goto error;
+
+	dprintk(0, "registered ALSA audio device\n");
+
+	return chip;
+
+error:
+	snd_card_free(card);
+	printk(KERN_ERR "%s(): Failed to register analog "
+			"audio adapter\n", __func__);
+
+	return NULL;
+}
+
+/*
+ * ALSA destructor
+ */
+void cx23885_audio_unregister(struct cx23885_dev *dev)
+{
+	struct cx23885_audio_dev *chip = dev->audio_dev;
+
+	snd_card_free(chip->card);
+}
diff --git a/drivers/media/pci/cx23885/cx23885-av.c b/drivers/media/pci/cx23885/cx23885-av.c
new file mode 100644
index 0000000..134ebdd
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-av.c
@@ -0,0 +1,35 @@
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  AV device support routines - non-input, non-vl42_subdev routines
+ *
+ *  Copyright (C) 2010  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ */
+
+#include "cx23885.h"
+
+void cx23885_av_work_handler(struct work_struct *work)
+{
+	struct cx23885_dev *dev =
+			   container_of(work, struct cx23885_dev, cx25840_work);
+	bool handled;
+
+	v4l2_subdev_call(dev->sd_cx25840, core, interrupt_service_routine,
+			 PCI_MSK_AV_CORE, &handled);
+	cx23885_irq_enable(dev, PCI_MSK_AV_CORE);
+}
diff --git a/drivers/media/pci/cx23885/cx23885-av.h b/drivers/media/pci/cx23885/cx23885-av.h
new file mode 100644
index 0000000..d2915c3
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-av.h
@@ -0,0 +1,27 @@
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  AV device support routines - non-input, non-vl42_subdev routines
+ *
+ *  Copyright (C) 2010  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ */
+
+#ifndef _CX23885_AV_H_
+#define _CX23885_AV_H_
+void cx23885_av_work_handler(struct work_struct *work);
+#endif
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
new file mode 100644
index 0000000..39a4a4b
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -0,0 +1,1694 @@
+/*
+ *  Driver for the Conexant CX23885 PCIe bridge
+ *
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <media/cx25840.h>
+#include <linux/firmware.h>
+#include <misc/altera.h>
+
+#include "cx23885.h"
+#include "tuner-xc2028.h"
+#include "netup-eeprom.h"
+#include "netup-init.h"
+#include "altera-ci.h"
+#include "xc4000.h"
+#include "xc5000.h"
+#include "cx23888-ir.h"
+
+static unsigned int netup_card_rev = 4;
+module_param(netup_card_rev, int, 0644);
+MODULE_PARM_DESC(netup_card_rev,
+		"NetUP Dual DVB-T/C CI card revision");
+static unsigned int enable_885_ir;
+module_param(enable_885_ir, int, 0644);
+MODULE_PARM_DESC(enable_885_ir,
+		 "Enable integrated IR controller for supported\n"
+		 "\t\t    CX2388[57] boards that are wired for it:\n"
+		 "\t\t\tHVR-1250 (reported safe)\n"
+		 "\t\t\tTerraTec Cinergy T PCIe Dual (not well tested, appears to be safe)\n"
+		 "\t\t\tTeVii S470 (reported unsafe)\n"
+		 "\t\t    This can cause an interrupt storm with some cards.\n"
+		 "\t\t    Default: 0 [Disabled]");
+
+/* ------------------------------------------------------------------ */
+/* board config info                                                  */
+
+struct cx23885_board cx23885_boards[] = {
+	[CX23885_BOARD_UNKNOWN] = {
+		.name		= "UNKNOWN/GENERIC",
+		/* Ensure safe default for unknown boards */
+		.clk_freq       = 0,
+		.input          = {{
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = 0,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE2,
+			.vmux   = 1,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE3,
+			.vmux   = 2,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE4,
+			.vmux   = 3,
+		} },
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1800lp] = {
+		.name		= "Hauppauge WinTV-HVR1800lp",
+		.portc		= CX23885_MPEG_DVB,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0xff00,
+		}, {
+			.type   = CX23885_VMUX_DEBUG,
+			.vmux   = 0,
+			.gpio0  = 0xff01,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0xff02,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0xff02,
+		} },
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1800] = {
+		.name		= "Hauppauge WinTV-HVR1800",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portb		= CX23885_MPEG_ENCODER,
+		.portc		= CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_PHILIPS_TDA8290,
+		.tuner_addr	= 0x42, /* 0x84 >> 1 */
+		.tuner_bus	= 1,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN5_CH2 |
+					CX25840_VIN2_CH1,
+			.amux   = CX25840_AUDIO8,
+			.gpio0  = 0,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN6_CH1,
+			.amux   = CX25840_AUDIO7,
+			.gpio0  = 0,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN8_CH1 |
+					CX25840_SVIDEO_ON,
+			.amux   = CX25840_AUDIO7,
+			.gpio0  = 0,
+		} },
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1250] = {
+		.name		= "Hauppauge WinTV-HVR1250",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portc		= CX23885_MPEG_DVB,
+#ifdef MT2131_NO_ANALOG_SUPPORT_YET
+		.tuner_type	= TUNER_PHILIPS_TDA8290,
+		.tuner_addr	= 0x42, /* 0x84 >> 1 */
+		.tuner_bus	= 1,
+#endif
+		.force_bff	= 1,
+		.input          = {{
+#ifdef MT2131_NO_ANALOG_SUPPORT_YET
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN5_CH2 |
+					CX25840_VIN2_CH1,
+			.amux   = CX25840_AUDIO8,
+			.gpio0  = 0xff00,
+		}, {
+#endif
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN6_CH1,
+			.amux   = CX25840_AUDIO7,
+			.gpio0  = 0xff02,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN8_CH1 |
+					CX25840_SVIDEO_ON,
+			.amux   = CX25840_AUDIO7,
+			.gpio0  = 0xff02,
+		} },
+	},
+	[CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP] = {
+		.name		= "DViCO FusionHDTV5 Express",
+		.portb		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1500Q] = {
+		.name		= "Hauppauge WinTV-HVR1500Q",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1500] = {
+		.name		= "Hauppauge WinTV-HVR1500",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portc		= CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_XC2028,
+		.tuner_addr	= 0x61, /* 0xc2 >> 1 */
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN5_CH2 |
+					CX25840_VIN2_CH1,
+			.gpio0  = 0,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN6_CH1,
+			.gpio0  = 0,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN8_CH1 |
+					CX25840_SVIDEO_ON,
+			.gpio0  = 0,
+		} },
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1200] = {
+		.name		= "Hauppauge WinTV-HVR1200",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1700] = {
+		.name		= "Hauppauge WinTV-HVR1700",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1400] = {
+		.name		= "Hauppauge WinTV-HVR1400",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP] = {
+		.name		= "DViCO FusionHDTV7 Dual Express",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP] = {
+		.name		= "DViCO FusionHDTV DVB-T Dual Express",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H] = {
+		.name		= "Leadtek Winfast PxDVR3200 H",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000] = {
+		.name		= "Leadtek Winfast PxDVR3200 H XC4000",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portc		= CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_XC4000,
+		.tuner_addr	= 0x61,
+		.radio_type	= UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input		= {{
+			.type	= CX23885_VMUX_TELEVISION,
+			.vmux	= CX25840_VIN2_CH1 |
+				  CX25840_VIN5_CH2 |
+				  CX25840_NONE0_CH3,
+		}, {
+			.type	= CX23885_VMUX_COMPOSITE1,
+			.vmux	= CX25840_COMPOSITE1,
+		}, {
+			.type	= CX23885_VMUX_SVIDEO,
+			.vmux	= CX25840_SVIDEO_LUMA3 |
+				  CX25840_SVIDEO_CHROMA4,
+		}, {
+			.type	= CX23885_VMUX_COMPONENT,
+			.vmux	= CX25840_VIN7_CH1 |
+				  CX25840_VIN6_CH2 |
+				  CX25840_VIN8_CH3 |
+				  CX25840_COMPONENT_ON,
+		} },
+	},
+	[CX23885_BOARD_COMPRO_VIDEOMATE_E650F] = {
+		.name		= "Compro VideoMate E650F",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_TBS_6920] = {
+		.name		= "TurboSight TBS 6920",
+		.portb		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_TEVII_S470] = {
+		.name		= "TeVii S470",
+		.portb		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_DVBWORLD_2005] = {
+		.name		= "DVBWorld DVB-S2 2005",
+		.portb		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_NETUP_DUAL_DVBS2_CI] = {
+		.ci_type	= 1,
+		.name		= "NetUP Dual DVB-S2 CI",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1270] = {
+		.name		= "Hauppauge WinTV-HVR1270",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1275] = {
+		.name		= "Hauppauge WinTV-HVR1275",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1255] = {
+		.name		= "Hauppauge WinTV-HVR1255",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portc		= CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_ABSENT,
+		.tuner_addr	= 0x42, /* 0x84 >> 1 */
+		.force_bff	= 1,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN5_CH2 |
+					CX25840_VIN2_CH1 |
+					CX25840_DIF_ON,
+			.amux   = CX25840_AUDIO8,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN6_CH1,
+			.amux   = CX25840_AUDIO7,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN8_CH1 |
+					CX25840_SVIDEO_ON,
+			.amux   = CX25840_AUDIO7,
+		} },
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1255_22111] = {
+		.name		= "Hauppauge WinTV-HVR1255",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portc		= CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_ABSENT,
+		.tuner_addr	= 0x42, /* 0x84 >> 1 */
+		.force_bff	= 1,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN5_CH2 |
+					CX25840_VIN2_CH1 |
+					CX25840_DIF_ON,
+			.amux   = CX25840_AUDIO8,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN8_CH1 |
+					CX25840_SVIDEO_ON,
+			.amux   = CX25840_AUDIO7,
+		} },
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1210] = {
+		.name		= "Hauppauge WinTV-HVR1210",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_MYGICA_X8506] = {
+		.name		= "Mygica X8506 DMB-TH",
+		.tuner_type = TUNER_XC5000,
+		.tuner_addr = 0x61,
+		.tuner_bus	= 1,
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portb		= CX23885_MPEG_DVB,
+		.input		= {
+			{
+				.type   = CX23885_VMUX_TELEVISION,
+				.vmux   = CX25840_COMPOSITE2,
+			},
+			{
+				.type   = CX23885_VMUX_COMPOSITE1,
+				.vmux   = CX25840_COMPOSITE8,
+			},
+			{
+				.type   = CX23885_VMUX_SVIDEO,
+				.vmux   = CX25840_SVIDEO_LUMA3 |
+						CX25840_SVIDEO_CHROMA4,
+			},
+			{
+				.type   = CX23885_VMUX_COMPONENT,
+				.vmux   = CX25840_COMPONENT_ON |
+					CX25840_VIN1_CH1 |
+					CX25840_VIN6_CH2 |
+					CX25840_VIN7_CH3,
+			},
+		},
+	},
+	[CX23885_BOARD_MAGICPRO_PROHDTVE2] = {
+		.name		= "Magic-Pro ProHDTV Extreme 2",
+		.tuner_type = TUNER_XC5000,
+		.tuner_addr = 0x61,
+		.tuner_bus	= 1,
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portb		= CX23885_MPEG_DVB,
+		.input		= {
+			{
+				.type   = CX23885_VMUX_TELEVISION,
+				.vmux   = CX25840_COMPOSITE2,
+			},
+			{
+				.type   = CX23885_VMUX_COMPOSITE1,
+				.vmux   = CX25840_COMPOSITE8,
+			},
+			{
+				.type   = CX23885_VMUX_SVIDEO,
+				.vmux   = CX25840_SVIDEO_LUMA3 |
+						CX25840_SVIDEO_CHROMA4,
+			},
+			{
+				.type   = CX23885_VMUX_COMPONENT,
+				.vmux   = CX25840_COMPONENT_ON |
+					CX25840_VIN1_CH1 |
+					CX25840_VIN6_CH2 |
+					CX25840_VIN7_CH3,
+			},
+		},
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1850] = {
+		.name		= "Hauppauge WinTV-HVR1850",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portb		= CX23885_MPEG_ENCODER,
+		.portc		= CX23885_MPEG_DVB,
+		.tuner_type	= TUNER_ABSENT,
+		.tuner_addr	= 0x42, /* 0x84 >> 1 */
+		.force_bff	= 1,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN5_CH2 |
+					CX25840_VIN2_CH1 |
+					CX25840_DIF_ON,
+			.amux   = CX25840_AUDIO8,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN6_CH1,
+			.amux   = CX25840_AUDIO7,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   =	CX25840_VIN7_CH3 |
+					CX25840_VIN4_CH2 |
+					CX25840_VIN8_CH1 |
+					CX25840_SVIDEO_ON,
+			.amux   = CX25840_AUDIO7,
+		} },
+	},
+	[CX23885_BOARD_COMPRO_VIDEOMATE_E800] = {
+		.name		= "Compro VideoMate E800",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_HAUPPAUGE_HVR1290] = {
+		.name		= "Hauppauge WinTV-HVR1290",
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_MYGICA_X8558PRO] = {
+		.name		= "Mygica X8558 PRO DMB-TH",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_LEADTEK_WINFAST_PXTV1200] = {
+		.name           = "LEADTEK WinFast PxTV1200",
+		.porta          = CX23885_ANALOG_VIDEO,
+		.tuner_type     = TUNER_XC2028,
+		.tuner_addr     = 0x61,
+		.tuner_bus	= 1,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   = CX25840_VIN2_CH1 |
+				  CX25840_VIN5_CH2 |
+				  CX25840_NONE0_CH3,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = CX25840_COMPOSITE1,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   = CX25840_SVIDEO_LUMA3 |
+				  CX25840_SVIDEO_CHROMA4,
+		}, {
+			.type   = CX23885_VMUX_COMPONENT,
+			.vmux   = CX25840_VIN7_CH1 |
+				  CX25840_VIN6_CH2 |
+				  CX25840_VIN8_CH3 |
+				  CX25840_COMPONENT_ON,
+		} },
+	},
+	[CX23885_BOARD_GOTVIEW_X5_3D_HYBRID] = {
+		.name		= "GoTView X5 3D Hybrid",
+		.tuner_type	= TUNER_XC5000,
+		.tuner_addr	= 0x64,
+		.tuner_bus	= 1,
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portb		= CX23885_MPEG_DVB,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   = CX25840_VIN2_CH1 |
+				  CX25840_VIN5_CH2,
+			.gpio0	= 0x02,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = CX23885_VMUX_COMPOSITE1,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   = CX25840_SVIDEO_LUMA3 |
+				  CX25840_SVIDEO_CHROMA4,
+		} },
+	},
+	[CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF] = {
+		.ci_type	= 2,
+		.name		= "NetUP Dual DVB-T/C-CI RF",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+		.num_fds_portb	= 2,
+		.num_fds_portc	= 2,
+		.tuner_type	= TUNER_XC5000,
+		.tuner_addr	= 0x64,
+		.input          = { {
+				.type   = CX23885_VMUX_TELEVISION,
+				.vmux   = CX25840_COMPOSITE1,
+		} },
+	},
+	[CX23885_BOARD_MPX885] = {
+		.name		= "MPX-885",
+		.porta		= CX23885_ANALOG_VIDEO,
+		.input          = {{
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = CX25840_COMPOSITE1,
+			.amux   = CX25840_AUDIO6,
+			.gpio0  = 0,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE2,
+			.vmux   = CX25840_COMPOSITE2,
+			.amux   = CX25840_AUDIO6,
+			.gpio0  = 0,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE3,
+			.vmux   = CX25840_COMPOSITE3,
+			.amux   = CX25840_AUDIO7,
+			.gpio0  = 0,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE4,
+			.vmux   = CX25840_COMPOSITE4,
+			.amux   = CX25840_AUDIO7,
+			.gpio0  = 0,
+		} },
+	},
+	[CX23885_BOARD_MYGICA_X8507] = {
+		.name		= "Mygica X8507",
+		.tuner_type = TUNER_XC5000,
+		.tuner_addr = 0x61,
+		.tuner_bus	= 1,
+		.porta		= CX23885_ANALOG_VIDEO,
+		.input		= {
+			{
+				.type   = CX23885_VMUX_TELEVISION,
+				.vmux   = CX25840_COMPOSITE2,
+				.amux   = CX25840_AUDIO8,
+			},
+			{
+				.type   = CX23885_VMUX_COMPOSITE1,
+				.vmux   = CX25840_COMPOSITE8,
+			},
+			{
+				.type   = CX23885_VMUX_SVIDEO,
+				.vmux   = CX25840_SVIDEO_LUMA3 |
+						CX25840_SVIDEO_CHROMA4,
+			},
+			{
+				.type   = CX23885_VMUX_COMPONENT,
+				.vmux   = CX25840_COMPONENT_ON |
+					CX25840_VIN1_CH1 |
+					CX25840_VIN6_CH2 |
+					CX25840_VIN7_CH3,
+			},
+		},
+	},
+	[CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL] = {
+		.name		= "TerraTec Cinergy T PCIe Dual",
+		.portb		= CX23885_MPEG_DVB,
+		.portc		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_TEVII_S471] = {
+		.name		= "TeVii S471",
+		.portb		= CX23885_MPEG_DVB,
+	},
+	[CX23885_BOARD_PROF_8000] = {
+		.name		= "Prof Revolution DVB-S2 8000",
+		.portb		= CX23885_MPEG_DVB,
+	}
+};
+const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
+
+/* ------------------------------------------------------------------ */
+/* PCI subsystem IDs                                                  */
+
+struct cx23885_subid cx23885_subids[] = {
+	{
+		.subvendor = 0x0070,
+		.subdevice = 0x3400,
+		.card      = CX23885_BOARD_UNKNOWN,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x7600,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800lp,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x7800,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x7801,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x7809,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1800,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x7911,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1250,
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xd500,
+		.card      = CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x7790,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x7797,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1500Q,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x7710,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1500,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x7717,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1500,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x71d1,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1200,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x71d3,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1200,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8101,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1700,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8010,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1400,
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xd618,
+		.card      = CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP,
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xdb78,
+		.card      = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x6681,
+		.card      = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x6f39,
+		.card	   = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000,
+	}, {
+		.subvendor = 0x185b,
+		.subdevice = 0xe800,
+		.card      = CX23885_BOARD_COMPRO_VIDEOMATE_E650F,
+	}, {
+		.subvendor = 0x6920,
+		.subdevice = 0x8888,
+		.card      = CX23885_BOARD_TBS_6920,
+	}, {
+		.subvendor = 0xd470,
+		.subdevice = 0x9022,
+		.card      = CX23885_BOARD_TEVII_S470,
+	}, {
+		.subvendor = 0x0001,
+		.subdevice = 0x2005,
+		.card      = CX23885_BOARD_DVBWORLD_2005,
+	}, {
+		.subvendor = 0x1b55,
+		.subdevice = 0x2a2c,
+		.card      = CX23885_BOARD_NETUP_DUAL_DVBS2_CI,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2211,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1270,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2215,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1275,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x221d,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1275,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2251,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1255,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2259,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1255_22111,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2291,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2295,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2299,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x229d,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x22f0,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x22f1,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1255,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x22f2,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1275,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x22f3,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x22f4,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x22f5,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */
+	}, {
+		.subvendor = 0x14f1,
+		.subdevice = 0x8651,
+		.card      = CX23885_BOARD_MYGICA_X8506,
+	}, {
+		.subvendor = 0x14f1,
+		.subdevice = 0x8657,
+		.card      = CX23885_BOARD_MAGICPRO_PROHDTVE2,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8541,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1850,
+	}, {
+		.subvendor = 0x1858,
+		.subdevice = 0xe800,
+		.card      = CX23885_BOARD_COMPRO_VIDEOMATE_E800,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8551,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR1290,
+	}, {
+		.subvendor = 0x14f1,
+		.subdevice = 0x8578,
+		.card      = CX23885_BOARD_MYGICA_X8558PRO,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x6f22,
+		.card      = CX23885_BOARD_LEADTEK_WINFAST_PXTV1200,
+	}, {
+		.subvendor = 0x5654,
+		.subdevice = 0x2390,
+		.card      = CX23885_BOARD_GOTVIEW_X5_3D_HYBRID,
+	}, {
+		.subvendor = 0x1b55,
+		.subdevice = 0xe2e4,
+		.card      = CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF,
+	}, {
+		.subvendor = 0x14f1,
+		.subdevice = 0x8502,
+		.card      = CX23885_BOARD_MYGICA_X8507,
+	}, {
+		.subvendor = 0x153b,
+		.subdevice = 0x117e,
+		.card      = CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL,
+	}, {
+		.subvendor = 0xd471,
+		.subdevice = 0x9022,
+		.card      = CX23885_BOARD_TEVII_S471,
+	}, {
+		.subvendor = 0x8000,
+		.subdevice = 0x3034,
+		.card      = CX23885_BOARD_PROF_8000,
+	},
+};
+const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
+
+void cx23885_card_list(struct cx23885_dev *dev)
+{
+	int i;
+
+	if (0 == dev->pci->subsystem_vendor &&
+	    0 == dev->pci->subsystem_device) {
+		printk(KERN_INFO
+			"%s: Board has no valid PCIe Subsystem ID and can't\n"
+		       "%s: be autodetected. Pass card=<n> insmod option\n"
+		       "%s: to workaround that. Redirect complaints to the\n"
+		       "%s: vendor of the TV card.  Best regards,\n"
+		       "%s:         -- tux\n",
+		       dev->name, dev->name, dev->name, dev->name, dev->name);
+	} else {
+		printk(KERN_INFO
+			"%s: Your board isn't known (yet) to the driver.\n"
+		       "%s: Try to pick one of the existing card configs via\n"
+		       "%s: card=<n> insmod option.  Updating to the latest\n"
+		       "%s: version might help as well.\n",
+		       dev->name, dev->name, dev->name, dev->name);
+	}
+	printk(KERN_INFO "%s: Here is a list of valid choices for the card=<n> insmod option:\n",
+	       dev->name);
+	for (i = 0; i < cx23885_bcount; i++)
+		printk(KERN_INFO "%s:    card=%d -> %s\n",
+		       dev->name, i, cx23885_boards[i].name);
+}
+
+static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
+{
+	struct tveeprom tv;
+
+	tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv,
+		eeprom_data);
+
+	/* Make sure we support the board model */
+	switch (tv.model) {
+	case 22001:
+		/* WinTV-HVR1270 (PCIe, Retail, half height)
+		 * ATSC/QAM and basic analog, IR Blast */
+	case 22009:
+		/* WinTV-HVR1210 (PCIe, Retail, half height)
+		 * DVB-T and basic analog, IR Blast */
+	case 22011:
+		/* WinTV-HVR1270 (PCIe, Retail, half height)
+		 * ATSC/QAM and basic analog, IR Recv */
+	case 22019:
+		/* WinTV-HVR1210 (PCIe, Retail, half height)
+		 * DVB-T and basic analog, IR Recv */
+	case 22021:
+		/* WinTV-HVR1275 (PCIe, Retail, half height)
+		 * ATSC/QAM and basic analog, IR Recv */
+	case 22029:
+		/* WinTV-HVR1210 (PCIe, Retail, half height)
+		 * DVB-T and basic analog, IR Recv */
+	case 22101:
+		/* WinTV-HVR1270 (PCIe, Retail, full height)
+		 * ATSC/QAM and basic analog, IR Blast */
+	case 22109:
+		/* WinTV-HVR1210 (PCIe, Retail, full height)
+		 * DVB-T and basic analog, IR Blast */
+	case 22111:
+		/* WinTV-HVR1270 (PCIe, Retail, full height)
+		 * ATSC/QAM and basic analog, IR Recv */
+	case 22119:
+		/* WinTV-HVR1210 (PCIe, Retail, full height)
+		 * DVB-T and basic analog, IR Recv */
+	case 22121:
+		/* WinTV-HVR1275 (PCIe, Retail, full height)
+		 * ATSC/QAM and basic analog, IR Recv */
+	case 22129:
+		/* WinTV-HVR1210 (PCIe, Retail, full height)
+		 * DVB-T and basic analog, IR Recv */
+	case 71009:
+		/* WinTV-HVR1200 (PCIe, Retail, full height)
+		 * DVB-T and basic analog */
+	case 71359:
+		/* WinTV-HVR1200 (PCIe, OEM, half height)
+		 * DVB-T and basic analog */
+	case 71439:
+		/* WinTV-HVR1200 (PCIe, OEM, half height)
+		 * DVB-T and basic analog */
+	case 71449:
+		/* WinTV-HVR1200 (PCIe, OEM, full height)
+		 * DVB-T and basic analog */
+	case 71939:
+		/* WinTV-HVR1200 (PCIe, OEM, half height)
+		 * DVB-T and basic analog */
+	case 71949:
+		/* WinTV-HVR1200 (PCIe, OEM, full height)
+		 * DVB-T and basic analog */
+	case 71959:
+		/* WinTV-HVR1200 (PCIe, OEM, full height)
+		 * DVB-T and basic analog */
+	case 71979:
+		/* WinTV-HVR1200 (PCIe, OEM, half height)
+		 * DVB-T and basic analog */
+	case 71999:
+		/* WinTV-HVR1200 (PCIe, OEM, full height)
+		 * DVB-T and basic analog */
+	case 76601:
+		/* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual
+			channel ATSC and MPEG2 HW Encoder */
+	case 77001:
+		/* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC
+			and Basic analog */
+	case 77011:
+		/* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC
+			and Basic analog */
+	case 77041:
+		/* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM
+			and Basic analog */
+	case 77051:
+		/* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM
+			and Basic analog */
+	case 78011:
+		/* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM,
+			Dual channel ATSC and MPEG2 HW Encoder */
+	case 78501:
+		/* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM,
+			Dual channel ATSC and MPEG2 HW Encoder */
+	case 78521:
+		/* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM,
+			Dual channel ATSC and MPEG2 HW Encoder */
+	case 78531:
+		/* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM,
+			Dual channel ATSC and MPEG2 HW Encoder */
+	case 78631:
+		/* WinTV-HVR1800 (PCIe, OEM, No IR, No FM,
+			Dual channel ATSC and MPEG2 HW Encoder */
+	case 79001:
+		/* WinTV-HVR1250 (PCIe, Retail, IR, full height,
+			ATSC and Basic analog */
+	case 79101:
+		/* WinTV-HVR1250 (PCIe, Retail, IR, half height,
+			ATSC and Basic analog */
+	case 79501:
+		/* WinTV-HVR1250 (PCIe, No IR, half height,
+			ATSC [at least] and Basic analog) */
+	case 79561:
+		/* WinTV-HVR1250 (PCIe, OEM, No IR, half height,
+			ATSC and Basic analog */
+	case 79571:
+		/* WinTV-HVR1250 (PCIe, OEM, No IR, full height,
+		 ATSC and Basic analog */
+	case 79671:
+		/* WinTV-HVR1250 (PCIe, OEM, No IR, half height,
+			ATSC and Basic analog */
+	case 80019:
+		/* WinTV-HVR1400 (Express Card, Retail, IR,
+		 * DVB-T and Basic analog */
+	case 81509:
+		/* WinTV-HVR1700 (PCIe, OEM, No IR, half height)
+		 * DVB-T and MPEG2 HW Encoder */
+	case 81519:
+		/* WinTV-HVR1700 (PCIe, OEM, No IR, full height)
+		 * DVB-T and MPEG2 HW Encoder */
+		break;
+	case 85021:
+		/* WinTV-HVR1850 (PCIe, Retail, 3.5mm in, IR, FM,
+			Dual channel ATSC and MPEG2 HW Encoder */
+		break;
+	case 85721:
+		/* WinTV-HVR1290 (PCIe, OEM, RCA in, IR,
+			Dual channel ATSC and Basic analog */
+		break;
+	default:
+		printk(KERN_WARNING "%s: warning: "
+			"unknown hauppauge model #%d\n",
+			dev->name, tv.model);
+		break;
+	}
+
+	printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n",
+			dev->name, tv.model);
+}
+
+int cx23885_tuner_callback(void *priv, int component, int command, int arg)
+{
+	struct cx23885_tsport *port = priv;
+	struct cx23885_dev *dev = port->dev;
+	u32 bitmask = 0;
+
+	if ((command == XC2028_RESET_CLK) || (command == XC2028_I2C_FLUSH))
+		return 0;
+
+	if (command != 0) {
+		printk(KERN_ERR "%s(): Unknown command 0x%x.\n",
+			__func__, command);
+		return -EINVAL;
+	}
+
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1400:
+	case CX23885_BOARD_HAUPPAUGE_HVR1500:
+	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
+		/* Tuner Reset Command */
+		bitmask = 0x04;
+		break;
+	case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
+	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
+		/* Two identical tuners on two different i2c buses,
+		 * we need to reset the correct gpio. */
+		if (port->nr == 1)
+			bitmask = 0x01;
+		else if (port->nr == 2)
+			bitmask = 0x04;
+		break;
+	case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
+		/* Tuner Reset Command */
+		bitmask = 0x02;
+		break;
+	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
+		altera_ci_tuner_reset(dev, port->nr);
+		break;
+	}
+
+	if (bitmask) {
+		/* Drive the tuner into reset and back out */
+		cx_clear(GP0_IO, bitmask);
+		mdelay(200);
+		cx_set(GP0_IO, bitmask);
+	}
+
+	return 0;
+}
+
+void cx23885_gpio_setup(struct cx23885_dev *dev)
+{
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		/* GPIO-0 cx24227 demodulator reset */
+		cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1500:
+		/* GPIO-0 cx24227 demodulator */
+		/* GPIO-2 xc3028 tuner */
+
+		/* Put the parts into reset */
+		cx_set(GP0_IO, 0x00050000);
+		cx_clear(GP0_IO, 0x00000005);
+		msleep(5);
+
+		/* Bring the parts out of reset */
+		cx_set(GP0_IO, 0x00050005);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+		/* GPIO-0 cx24227 demodulator reset */
+		/* GPIO-2 xc5000 tuner reset */
+		cx_set(GP0_IO, 0x00050005); /* Bring the part out of reset */
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1800:
+		/* GPIO-0 656_CLK */
+		/* GPIO-1 656_D0 */
+		/* GPIO-2 8295A Reset */
+		/* GPIO-3-10 cx23417 data0-7 */
+		/* GPIO-11-14 cx23417 addr0-3 */
+		/* GPIO-15-18 cx23417 READY, CS, RD, WR */
+		/* GPIO-19 IR_RX */
+
+		/* CX23417 GPIO's */
+		/* EIO15 Zilog Reset */
+		/* EIO14 S5H1409/CX24227 Reset */
+		mc417_gpio_enable(dev, GPIO_15 | GPIO_14, 1);
+
+		/* Put the demod into reset and protect the eeprom */
+		mc417_gpio_clear(dev, GPIO_15 | GPIO_14);
+		mdelay(100);
+
+		/* Bring the demod and blaster out of reset */
+		mc417_gpio_set(dev, GPIO_15 | GPIO_14);
+		mdelay(100);
+
+		/* Force the TDA8295A into reset and back */
+		cx23885_gpio_enable(dev, GPIO_2, 1);
+		cx23885_gpio_set(dev, GPIO_2);
+		mdelay(20);
+		cx23885_gpio_clear(dev, GPIO_2);
+		mdelay(20);
+		cx23885_gpio_set(dev, GPIO_2);
+		mdelay(20);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1200:
+		/* GPIO-0 tda10048 demodulator reset */
+		/* GPIO-2 tda18271 tuner reset */
+
+		/* Put the parts into reset and back */
+		cx_set(GP0_IO, 0x00050000);
+		mdelay(20);
+		cx_clear(GP0_IO, 0x00000005);
+		mdelay(20);
+		cx_set(GP0_IO, 0x00050005);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1700:
+		/* GPIO-0 TDA10048 demodulator reset */
+		/* GPIO-2 TDA8295A Reset */
+		/* GPIO-3-10 cx23417 data0-7 */
+		/* GPIO-11-14 cx23417 addr0-3 */
+		/* GPIO-15-18 cx23417 READY, CS, RD, WR */
+
+		/* The following GPIO's are on the interna AVCore (cx25840) */
+		/* GPIO-19 IR_RX */
+		/* GPIO-20 IR_TX 416/DVBT Select */
+		/* GPIO-21 IIS DAT */
+		/* GPIO-22 IIS WCLK */
+		/* GPIO-23 IIS BCLK */
+
+		/* Put the parts into reset and back */
+		cx_set(GP0_IO, 0x00050000);
+		mdelay(20);
+		cx_clear(GP0_IO, 0x00000005);
+		mdelay(20);
+		cx_set(GP0_IO, 0x00050005);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1400:
+		/* GPIO-0  Dibcom7000p demodulator reset */
+		/* GPIO-2  xc3028L tuner reset */
+		/* GPIO-13 LED */
+
+		/* Put the parts into reset and back */
+		cx_set(GP0_IO, 0x00050000);
+		mdelay(20);
+		cx_clear(GP0_IO, 0x00000005);
+		mdelay(20);
+		cx_set(GP0_IO, 0x00050005);
+		break;
+	case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
+		/* GPIO-0 xc5000 tuner reset i2c bus 0 */
+		/* GPIO-1 s5h1409 demod reset i2c bus 0 */
+		/* GPIO-2 xc5000 tuner reset i2c bus 1 */
+		/* GPIO-3 s5h1409 demod reset i2c bus 0 */
+
+		/* Put the parts into reset and back */
+		cx_set(GP0_IO, 0x000f0000);
+		mdelay(20);
+		cx_clear(GP0_IO, 0x0000000f);
+		mdelay(20);
+		cx_set(GP0_IO, 0x000f000f);
+		break;
+	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
+		/* GPIO-0 portb xc3028 reset */
+		/* GPIO-1 portb zl10353 reset */
+		/* GPIO-2 portc xc3028 reset */
+		/* GPIO-3 portc zl10353 reset */
+
+		/* Put the parts into reset and back */
+		cx_set(GP0_IO, 0x000f0000);
+		mdelay(20);
+		cx_clear(GP0_IO, 0x0000000f);
+		mdelay(20);
+		cx_set(GP0_IO, 0x000f000f);
+		break;
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
+		/* GPIO-2  xc3028 tuner reset */
+
+		/* The following GPIO's are on the internal AVCore (cx25840) */
+		/* GPIO-?  zl10353 demod reset */
+
+		/* Put the parts into reset and back */
+		cx_set(GP0_IO, 0x00040000);
+		mdelay(20);
+		cx_clear(GP0_IO, 0x00000004);
+		mdelay(20);
+		cx_set(GP0_IO, 0x00040004);
+		break;
+	case CX23885_BOARD_TBS_6920:
+	case CX23885_BOARD_PROF_8000:
+		cx_write(MC417_CTL, 0x00000036);
+		cx_write(MC417_OEN, 0x00001000);
+		cx_set(MC417_RWD, 0x00000002);
+		mdelay(200);
+		cx_clear(MC417_RWD, 0x00000800);
+		mdelay(200);
+		cx_set(MC417_RWD, 0x00000800);
+		mdelay(200);
+		break;
+	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+		/* GPIO-0 INTA from CiMax1
+		   GPIO-1 INTB from CiMax2
+		   GPIO-2 reset chips
+		   GPIO-3 to GPIO-10 data/addr for CA
+		   GPIO-11 ~CS0 to CiMax1
+		   GPIO-12 ~CS1 to CiMax2
+		   GPIO-13 ADL0 load LSB addr
+		   GPIO-14 ADL1 load MSB addr
+		   GPIO-15 ~RDY from CiMax
+		   GPIO-17 ~RD to CiMax
+		   GPIO-18 ~WR to CiMax
+		 */
+		cx_set(GP0_IO, 0x00040000); /* GPIO as out */
+		/* GPIO1 and GPIO2 as INTA and INTB from CiMaxes, reset low */
+		cx_clear(GP0_IO, 0x00030004);
+		mdelay(100);/* reset delay */
+		cx_set(GP0_IO, 0x00040004); /* GPIO as out, reset high */
+		cx_write(MC417_CTL, 0x00000037);/* enable GPIO3-18 pins */
+		/* GPIO-15 IN as ~ACK, rest as OUT */
+		cx_write(MC417_OEN, 0x00001000);
+		/* ~RD, ~WR high; ADL0, ADL1 low; ~CS0, ~CS1 high */
+		cx_write(MC417_RWD, 0x0000c300);
+		/* enable irq */
+		cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
+	case CX23885_BOARD_HAUPPAUGE_HVR1210:
+		/* GPIO-5 RF Control: 0 = RF1 Terrestrial, 1 = RF2 Cable */
+		/* GPIO-6 I2C Gate which can isolate the demod from the bus */
+		/* GPIO-9 Demod reset */
+
+		/* Put the parts into reset and back */
+		cx23885_gpio_enable(dev, GPIO_9 | GPIO_6 | GPIO_5, 1);
+		cx23885_gpio_set(dev, GPIO_9 | GPIO_6 | GPIO_5);
+		cx23885_gpio_clear(dev, GPIO_9);
+		mdelay(20);
+		cx23885_gpio_set(dev, GPIO_9);
+		break;
+	case CX23885_BOARD_MYGICA_X8506:
+	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+	case CX23885_BOARD_MYGICA_X8507:
+		/* GPIO-0 (0)Analog / (1)Digital TV */
+		/* GPIO-1 reset XC5000 */
+		/* GPIO-2 reset LGS8GL5 / LGS8G75 */
+		cx23885_gpio_enable(dev, GPIO_0 | GPIO_1 | GPIO_2, 1);
+		cx23885_gpio_clear(dev, GPIO_1 | GPIO_2);
+		mdelay(100);
+		cx23885_gpio_set(dev, GPIO_0 | GPIO_1 | GPIO_2);
+		mdelay(100);
+		break;
+	case CX23885_BOARD_MYGICA_X8558PRO:
+		/* GPIO-0 reset first ATBM8830 */
+		/* GPIO-1 reset second ATBM8830 */
+		cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1);
+		cx23885_gpio_clear(dev, GPIO_0 | GPIO_1);
+		mdelay(100);
+		cx23885_gpio_set(dev, GPIO_0 | GPIO_1);
+		mdelay(100);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+		/* GPIO-0 656_CLK */
+		/* GPIO-1 656_D0 */
+		/* GPIO-2 Wake# */
+		/* GPIO-3-10 cx23417 data0-7 */
+		/* GPIO-11-14 cx23417 addr0-3 */
+		/* GPIO-15-18 cx23417 READY, CS, RD, WR */
+		/* GPIO-19 IR_RX */
+		/* GPIO-20 C_IR_TX */
+		/* GPIO-21 I2S DAT */
+		/* GPIO-22 I2S WCLK */
+		/* GPIO-23 I2S BCLK */
+		/* ALT GPIO: EXP GPIO LATCH */
+
+		/* CX23417 GPIO's */
+		/* GPIO-14 S5H1411/CX24228 Reset */
+		/* GPIO-13 EEPROM write protect */
+		mc417_gpio_enable(dev, GPIO_14 | GPIO_13, 1);
+
+		/* Put the demod into reset and protect the eeprom */
+		mc417_gpio_clear(dev, GPIO_14 | GPIO_13);
+		mdelay(100);
+
+		/* Bring the demod out of reset */
+		mc417_gpio_set(dev, GPIO_14);
+		mdelay(100);
+
+		/* CX24228 GPIO */
+		/* Connected to IF / Mux */
+		break;
+	case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
+		cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */
+		break;
+	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
+		/* GPIO-0 ~INT in
+		   GPIO-1 TMS out
+		   GPIO-2 ~reset chips out
+		   GPIO-3 to GPIO-10 data/addr for CA in/out
+		   GPIO-11 ~CS out
+		   GPIO-12 ADDR out
+		   GPIO-13 ~WR out
+		   GPIO-14 ~RD out
+		   GPIO-15 ~RDY in
+		   GPIO-16 TCK out
+		   GPIO-17 TDO in
+		   GPIO-18 TDI out
+		 */
+		cx_set(GP0_IO, 0x00060000); /* GPIO-1,2 as out */
+		/* GPIO-0 as INT, reset & TMS low */
+		cx_clear(GP0_IO, 0x00010006);
+		mdelay(100);/* reset delay */
+		cx_set(GP0_IO, 0x00000004); /* reset high */
+		cx_write(MC417_CTL, 0x00000037);/* enable GPIO-3..18 pins */
+		/* GPIO-17 is TDO in, GPIO-15 is ~RDY in, rest is out */
+		cx_write(MC417_OEN, 0x00005000);
+		/* ~RD, ~WR high; ADDR low; ~CS high */
+		cx_write(MC417_RWD, 0x00000d00);
+		/* enable irq */
+		cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/
+		break;
+	}
+}
+
+int cx23885_ir_init(struct cx23885_dev *dev)
+{
+	static struct v4l2_subdev_io_pin_config ir_rxtx_pin_cfg[] = {
+		{
+			.flags	  = V4L2_SUBDEV_IO_PIN_INPUT,
+			.pin	  = CX23885_PIN_IR_RX_GPIO19,
+			.function = CX23885_PAD_IR_RX,
+			.value	  = 0,
+			.strength = CX25840_PIN_DRIVE_MEDIUM,
+		}, {
+			.flags	  = V4L2_SUBDEV_IO_PIN_OUTPUT,
+			.pin	  = CX23885_PIN_IR_TX_GPIO20,
+			.function = CX23885_PAD_IR_TX,
+			.value	  = 0,
+			.strength = CX25840_PIN_DRIVE_MEDIUM,
+		}
+	};
+	const size_t ir_rxtx_pin_cfg_count = ARRAY_SIZE(ir_rxtx_pin_cfg);
+
+	static struct v4l2_subdev_io_pin_config ir_rx_pin_cfg[] = {
+		{
+			.flags	  = V4L2_SUBDEV_IO_PIN_INPUT,
+			.pin	  = CX23885_PIN_IR_RX_GPIO19,
+			.function = CX23885_PAD_IR_RX,
+			.value	  = 0,
+			.strength = CX25840_PIN_DRIVE_MEDIUM,
+		}
+	};
+	const size_t ir_rx_pin_cfg_count = ARRAY_SIZE(ir_rx_pin_cfg);
+
+	struct v4l2_subdev_ir_parameters params;
+	int ret = 0;
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1500:
+	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+	case CX23885_BOARD_HAUPPAUGE_HVR1800:
+	case CX23885_BOARD_HAUPPAUGE_HVR1200:
+	case CX23885_BOARD_HAUPPAUGE_HVR1400:
+	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
+	case CX23885_BOARD_HAUPPAUGE_HVR1210:
+		/* FIXME: Implement me */
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+		ret = cx23888_ir_probe(dev);
+		if (ret)
+			break;
+		dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR);
+		v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+				 ir_rx_pin_cfg_count, ir_rx_pin_cfg);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+		ret = cx23888_ir_probe(dev);
+		if (ret)
+			break;
+		dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR);
+		v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+				 ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg);
+		/*
+		 * For these boards we need to invert the Tx output via the
+		 * IR controller to have the LED off while idle
+		 */
+		v4l2_subdev_call(dev->sd_ir, ir, tx_g_parameters, &params);
+		params.enable = false;
+		params.shutdown = false;
+		params.invert_level = true;
+		v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, &params);
+		params.shutdown = true;
+		v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, &params);
+		break;
+	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+	case CX23885_BOARD_TEVII_S470:
+		if (!enable_885_ir)
+			break;
+		dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
+		if (dev->sd_ir == NULL) {
+			ret = -ENODEV;
+			break;
+		}
+		v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+				 ir_rx_pin_cfg_count, ir_rx_pin_cfg);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		if (!enable_885_ir)
+			break;
+		dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
+		if (dev->sd_ir == NULL) {
+			ret = -ENODEV;
+			break;
+		}
+		v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+				 ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg);
+		break;
+	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
+		request_module("ir-kbd-i2c");
+		break;
+	}
+
+	return ret;
+}
+
+void cx23885_ir_fini(struct cx23885_dev *dev)
+{
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+		cx23885_irq_remove(dev, PCI_MSK_IR);
+		cx23888_ir_remove(dev);
+		dev->sd_ir = NULL;
+		break;
+	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+	case CX23885_BOARD_TEVII_S470:
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
+		/* sd_ir is a duplicate pointer to the AV Core, just clear it */
+		dev->sd_ir = NULL;
+		break;
+	}
+}
+
+int netup_jtag_io(void *device, int tms, int tdi, int read_tdo)
+{
+	int data;
+	int tdo = 0;
+	struct cx23885_dev *dev = (struct cx23885_dev *)device;
+	/*TMS*/
+	data = ((cx_read(GP0_IO)) & (~0x00000002));
+	data |= (tms ? 0x00020002 : 0x00020000);
+	cx_write(GP0_IO, data);
+
+	/*TDI*/
+	data = ((cx_read(MC417_RWD)) & (~0x0000a000));
+	data |= (tdi ? 0x00008000 : 0);
+	cx_write(MC417_RWD, data);
+	if (read_tdo)
+		tdo = (data & 0x00004000) ? 1 : 0; /*TDO*/
+
+	cx_write(MC417_RWD, data | 0x00002000);
+	udelay(1);
+	/*TCK*/
+	cx_write(MC417_RWD, data);
+
+	return tdo;
+}
+
+void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
+{
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+		if (dev->sd_ir)
+			cx23885_irq_add_enable(dev, PCI_MSK_IR);
+		break;
+	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+	case CX23885_BOARD_TEVII_S470:
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		if (dev->sd_ir)
+			cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
+		break;
+	}
+}
+
+void cx23885_card_setup(struct cx23885_dev *dev)
+{
+	struct cx23885_tsport *ts1 = &dev->ts1;
+	struct cx23885_tsport *ts2 = &dev->ts2;
+
+	static u8 eeprom[256];
+
+	if (dev->i2c_bus[0].i2c_rc == 0) {
+		dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
+		tveeprom_read(&dev->i2c_bus[0].i2c_client,
+			      eeprom, sizeof(eeprom));
+	}
+
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		if (dev->i2c_bus[0].i2c_rc == 0) {
+			if (eeprom[0x80] != 0x84)
+				hauppauge_eeprom(dev, eeprom+0xc0);
+			else
+				hauppauge_eeprom(dev, eeprom+0x80);
+		}
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1500:
+	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+	case CX23885_BOARD_HAUPPAUGE_HVR1400:
+		if (dev->i2c_bus[0].i2c_rc == 0)
+			hauppauge_eeprom(dev, eeprom+0x80);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1800:
+	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+	case CX23885_BOARD_HAUPPAUGE_HVR1200:
+	case CX23885_BOARD_HAUPPAUGE_HVR1700:
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
+	case CX23885_BOARD_HAUPPAUGE_HVR1210:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+		if (dev->i2c_bus[0].i2c_rc == 0)
+			hauppauge_eeprom(dev, eeprom+0xc0);
+		break;
+	}
+
+	switch (dev->board) {
+	case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
+	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
+		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		/* break omitted intentionally */
+	case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
+		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1800:
+		/* Defaults for VID B - Analog encoder */
+		/* DREQ_POL, SMODE, PUNC_CLK, MCLK_POL Serial bus + punc clk */
+		ts1->gen_ctrl_val    = 0x10e;
+		ts1->ts_clk_en_val   = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val     = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+
+		/* APB_TSVALERR_POL (active low)*/
+		ts1->vld_misc_val    = 0x2000;
+		ts1->hw_sop_ctrl_val = (0x47 << 16 | 188 << 4 | 0xc);
+		cx_write(0x130184, 0xc);
+
+		/* Defaults for VID C */
+		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_TBS_6920:
+		ts1->gen_ctrl_val  = 0x4; /* Parallel */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_TEVII_S470:
+	case CX23885_BOARD_TEVII_S471:
+	case CX23885_BOARD_DVBWORLD_2005:
+	case CX23885_BOARD_PROF_8000:
+		ts1->gen_ctrl_val  = 0x5; /* Parallel */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
+	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_MYGICA_X8506:
+	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+		ts1->gen_ctrl_val  = 0x5; /* Parallel */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_MYGICA_X8558PRO:
+		ts1->gen_ctrl_val  = 0x5; /* Parallel */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+	case CX23885_BOARD_HAUPPAUGE_HVR1500:
+	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+	case CX23885_BOARD_HAUPPAUGE_HVR1200:
+	case CX23885_BOARD_HAUPPAUGE_HVR1700:
+	case CX23885_BOARD_HAUPPAUGE_HVR1400:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
+	case CX23885_BOARD_HAUPPAUGE_HVR1210:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+	case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
+	default:
+		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+	}
+
+	/* Certain boards support analog, or require the avcore to be
+	 * loaded, ensure this happens.
+	 */
+	switch (dev->board) {
+	case CX23885_BOARD_TEVII_S470:
+		/* Currently only enabled for the integrated IR controller */
+		if (!enable_885_ir)
+			break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+	case CX23885_BOARD_HAUPPAUGE_HVR1800:
+	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+	case CX23885_BOARD_HAUPPAUGE_HVR1700:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
+	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_MYGICA_X8506:
+	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+	case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
+	case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
+	case CX23885_BOARD_HAUPPAUGE_HVR1500:
+	case CX23885_BOARD_MPX885:
+	case CX23885_BOARD_MYGICA_X8507:
+	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+		dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
+				&dev->i2c_bus[2].i2c_adap,
+				"cx25840", 0x88 >> 1, NULL);
+		if (dev->sd_cx25840) {
+			dev->sd_cx25840->grp_id = CX23885_HW_AV_CORE;
+			v4l2_subdev_call(dev->sd_cx25840, core, load_fw);
+		}
+		break;
+	}
+
+	/* AUX-PLL 27MHz CLK */
+	switch (dev->board) {
+	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+		netup_initialize(dev);
+		break;
+	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: {
+		int ret;
+		const struct firmware *fw;
+		const char *filename = "dvb-netup-altera-01.fw";
+		char *action = "configure";
+		static struct netup_card_info cinfo;
+		struct altera_config netup_config = {
+			.dev = dev,
+			.action = action,
+			.jtag_io = netup_jtag_io,
+		};
+
+		netup_initialize(dev);
+
+		netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo);
+		if (netup_card_rev)
+			cinfo.rev = netup_card_rev;
+
+		switch (cinfo.rev) {
+		case 0x4:
+			filename = "dvb-netup-altera-04.fw";
+			break;
+		default:
+			filename = "dvb-netup-altera-01.fw";
+			break;
+		}
+		printk(KERN_INFO "NetUP card rev=0x%x fw_filename=%s\n",
+				cinfo.rev, filename);
+
+		ret = request_firmware(&fw, filename, &dev->pci->dev);
+		if (ret != 0)
+			printk(KERN_ERR "did not find the firmware file. (%s) "
+			"Please see linux/Documentation/dvb/ for more details "
+			"on firmware-problems.", filename);
+		else
+			altera_init(&netup_config, fw);
+
+		release_firmware(fw);
+		break;
+	}
+	}
+}
+
+/* ------------------------------------------------------------------ */
diff --git a/drivers/media/pci/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c
new file mode 100644
index 0000000..697728f
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-core.c
@@ -0,0 +1,2234 @@
+/*
+ *  Driver for the Conexant CX23885 PCIe bridge
+ *
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kmod.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <asm/div64.h>
+#include <linux/firmware.h>
+
+#include "cx23885.h"
+#include "cimax2.h"
+#include "altera-ci.h"
+#include "cx23888-ir.h"
+#include "cx23885-ir.h"
+#include "cx23885-av.h"
+#include "cx23885-input.h"
+
+MODULE_DESCRIPTION("Driver for cx23885 based TV cards");
+MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(CX23885_VERSION);
+
+static unsigned int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable debug messages");
+
+static unsigned int card[]  = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET };
+module_param_array(card,  int, NULL, 0444);
+MODULE_PARM_DESC(card, "card type");
+
+#define dprintk(level, fmt, arg...)\
+	do { if (debug >= level)\
+		printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg);\
+	} while (0)
+
+static unsigned int cx23885_devcount;
+
+#define NO_SYNC_LINE (-1U)
+
+/* FIXME, these allocations will change when
+ * analog arrives. The be reviewed.
+ * CX23887 Assumptions
+ * 1 line = 16 bytes of CDT
+ * cmds size = 80
+ * cdt size = 16 * linesize
+ * iqsize = 64
+ * maxlines = 6
+ *
+ * Address Space:
+ * 0x00000000 0x00008fff FIFO clusters
+ * 0x00010000 0x000104af Channel Management Data Structures
+ * 0x000104b0 0x000104ff Free
+ * 0x00010500 0x000108bf 15 channels * iqsize
+ * 0x000108c0 0x000108ff Free
+ * 0x00010900 0x00010e9f IQ's + Cluster Descriptor Tables
+ *                       15 channels * (iqsize + (maxlines * linesize))
+ * 0x00010ea0 0x00010xxx Free
+ */
+
+static struct sram_channel cx23885_sram_channels[] = {
+	[SRAM_CH01] = {
+		.name		= "VID A",
+		.cmds_start	= 0x10000,
+		.ctrl_start	= 0x10380,
+		.cdt		= 0x104c0,
+		.fifo_start	= 0x40,
+		.fifo_size	= 0x2800,
+		.ptr1_reg	= DMA1_PTR1,
+		.ptr2_reg	= DMA1_PTR2,
+		.cnt1_reg	= DMA1_CNT1,
+		.cnt2_reg	= DMA1_CNT2,
+	},
+	[SRAM_CH02] = {
+		.name		= "ch2",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA2_PTR1,
+		.ptr2_reg	= DMA2_PTR2,
+		.cnt1_reg	= DMA2_CNT1,
+		.cnt2_reg	= DMA2_CNT2,
+	},
+	[SRAM_CH03] = {
+		.name		= "TS1 B",
+		.cmds_start	= 0x100A0,
+		.ctrl_start	= 0x10400,
+		.cdt		= 0x10580,
+		.fifo_start	= 0x5000,
+		.fifo_size	= 0x1000,
+		.ptr1_reg	= DMA3_PTR1,
+		.ptr2_reg	= DMA3_PTR2,
+		.cnt1_reg	= DMA3_CNT1,
+		.cnt2_reg	= DMA3_CNT2,
+	},
+	[SRAM_CH04] = {
+		.name		= "ch4",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA4_PTR1,
+		.ptr2_reg	= DMA4_PTR2,
+		.cnt1_reg	= DMA4_CNT1,
+		.cnt2_reg	= DMA4_CNT2,
+	},
+	[SRAM_CH05] = {
+		.name		= "ch5",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA5_PTR1,
+		.ptr2_reg	= DMA5_PTR2,
+		.cnt1_reg	= DMA5_CNT1,
+		.cnt2_reg	= DMA5_CNT2,
+	},
+	[SRAM_CH06] = {
+		.name		= "TS2 C",
+		.cmds_start	= 0x10140,
+		.ctrl_start	= 0x10440,
+		.cdt		= 0x105e0,
+		.fifo_start	= 0x6000,
+		.fifo_size	= 0x1000,
+		.ptr1_reg	= DMA5_PTR1,
+		.ptr2_reg	= DMA5_PTR2,
+		.cnt1_reg	= DMA5_CNT1,
+		.cnt2_reg	= DMA5_CNT2,
+	},
+	[SRAM_CH07] = {
+		.name		= "TV Audio",
+		.cmds_start	= 0x10190,
+		.ctrl_start	= 0x10480,
+		.cdt		= 0x10a00,
+		.fifo_start	= 0x7000,
+		.fifo_size	= 0x1000,
+		.ptr1_reg	= DMA6_PTR1,
+		.ptr2_reg	= DMA6_PTR2,
+		.cnt1_reg	= DMA6_CNT1,
+		.cnt2_reg	= DMA6_CNT2,
+	},
+	[SRAM_CH08] = {
+		.name		= "ch8",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA7_PTR1,
+		.ptr2_reg	= DMA7_PTR2,
+		.cnt1_reg	= DMA7_CNT1,
+		.cnt2_reg	= DMA7_CNT2,
+	},
+	[SRAM_CH09] = {
+		.name		= "ch9",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA8_PTR1,
+		.ptr2_reg	= DMA8_PTR2,
+		.cnt1_reg	= DMA8_CNT1,
+		.cnt2_reg	= DMA8_CNT2,
+	},
+};
+
+static struct sram_channel cx23887_sram_channels[] = {
+	[SRAM_CH01] = {
+		.name		= "VID A",
+		.cmds_start	= 0x10000,
+		.ctrl_start	= 0x105b0,
+		.cdt		= 0x107b0,
+		.fifo_start	= 0x40,
+		.fifo_size	= 0x2800,
+		.ptr1_reg	= DMA1_PTR1,
+		.ptr2_reg	= DMA1_PTR2,
+		.cnt1_reg	= DMA1_CNT1,
+		.cnt2_reg	= DMA1_CNT2,
+	},
+	[SRAM_CH02] = {
+		.name		= "VID A (VBI)",
+		.cmds_start	= 0x10050,
+		.ctrl_start	= 0x105F0,
+		.cdt		= 0x10810,
+		.fifo_start	= 0x3000,
+		.fifo_size	= 0x1000,
+		.ptr1_reg	= DMA2_PTR1,
+		.ptr2_reg	= DMA2_PTR2,
+		.cnt1_reg	= DMA2_CNT1,
+		.cnt2_reg	= DMA2_CNT2,
+	},
+	[SRAM_CH03] = {
+		.name		= "TS1 B",
+		.cmds_start	= 0x100A0,
+		.ctrl_start	= 0x10630,
+		.cdt		= 0x10870,
+		.fifo_start	= 0x5000,
+		.fifo_size	= 0x1000,
+		.ptr1_reg	= DMA3_PTR1,
+		.ptr2_reg	= DMA3_PTR2,
+		.cnt1_reg	= DMA3_CNT1,
+		.cnt2_reg	= DMA3_CNT2,
+	},
+	[SRAM_CH04] = {
+		.name		= "ch4",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA4_PTR1,
+		.ptr2_reg	= DMA4_PTR2,
+		.cnt1_reg	= DMA4_CNT1,
+		.cnt2_reg	= DMA4_CNT2,
+	},
+	[SRAM_CH05] = {
+		.name		= "ch5",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA5_PTR1,
+		.ptr2_reg	= DMA5_PTR2,
+		.cnt1_reg	= DMA5_CNT1,
+		.cnt2_reg	= DMA5_CNT2,
+	},
+	[SRAM_CH06] = {
+		.name		= "TS2 C",
+		.cmds_start	= 0x10140,
+		.ctrl_start	= 0x10670,
+		.cdt		= 0x108d0,
+		.fifo_start	= 0x6000,
+		.fifo_size	= 0x1000,
+		.ptr1_reg	= DMA5_PTR1,
+		.ptr2_reg	= DMA5_PTR2,
+		.cnt1_reg	= DMA5_CNT1,
+		.cnt2_reg	= DMA5_CNT2,
+	},
+	[SRAM_CH07] = {
+		.name		= "TV Audio",
+		.cmds_start	= 0x10190,
+		.ctrl_start	= 0x106B0,
+		.cdt		= 0x10930,
+		.fifo_start	= 0x7000,
+		.fifo_size	= 0x1000,
+		.ptr1_reg	= DMA6_PTR1,
+		.ptr2_reg	= DMA6_PTR2,
+		.cnt1_reg	= DMA6_CNT1,
+		.cnt2_reg	= DMA6_CNT2,
+	},
+	[SRAM_CH08] = {
+		.name		= "ch8",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA7_PTR1,
+		.ptr2_reg	= DMA7_PTR2,
+		.cnt1_reg	= DMA7_CNT1,
+		.cnt2_reg	= DMA7_CNT2,
+	},
+	[SRAM_CH09] = {
+		.name		= "ch9",
+		.cmds_start	= 0x0,
+		.ctrl_start	= 0x0,
+		.cdt		= 0x0,
+		.fifo_start	= 0x0,
+		.fifo_size	= 0x0,
+		.ptr1_reg	= DMA8_PTR1,
+		.ptr2_reg	= DMA8_PTR2,
+		.cnt1_reg	= DMA8_CNT1,
+		.cnt2_reg	= DMA8_CNT2,
+	},
+};
+
+void cx23885_irq_add(struct cx23885_dev *dev, u32 mask)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+	dev->pci_irqmask |= mask;
+
+	spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+void cx23885_irq_add_enable(struct cx23885_dev *dev, u32 mask)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+	dev->pci_irqmask |= mask;
+	cx_set(PCI_INT_MSK, mask);
+
+	spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+void cx23885_irq_enable(struct cx23885_dev *dev, u32 mask)
+{
+	u32 v;
+	unsigned long flags;
+	spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+	v = mask & dev->pci_irqmask;
+	if (v)
+		cx_set(PCI_INT_MSK, v);
+
+	spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+static inline void cx23885_irq_enable_all(struct cx23885_dev *dev)
+{
+	cx23885_irq_enable(dev, 0xffffffff);
+}
+
+void cx23885_irq_disable(struct cx23885_dev *dev, u32 mask)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+	cx_clear(PCI_INT_MSK, mask);
+
+	spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+static inline void cx23885_irq_disable_all(struct cx23885_dev *dev)
+{
+	cx23885_irq_disable(dev, 0xffffffff);
+}
+
+void cx23885_irq_remove(struct cx23885_dev *dev, u32 mask)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+	dev->pci_irqmask &= ~mask;
+	cx_clear(PCI_INT_MSK, mask);
+
+	spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+}
+
+static u32 cx23885_irq_get_mask(struct cx23885_dev *dev)
+{
+	u32 v;
+	unsigned long flags;
+	spin_lock_irqsave(&dev->pci_irqmask_lock, flags);
+
+	v = cx_read(PCI_INT_MSK);
+
+	spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags);
+	return v;
+}
+
+static int cx23885_risc_decode(u32 risc)
+{
+	static char *instr[16] = {
+		[RISC_SYNC    >> 28] = "sync",
+		[RISC_WRITE   >> 28] = "write",
+		[RISC_WRITEC  >> 28] = "writec",
+		[RISC_READ    >> 28] = "read",
+		[RISC_READC   >> 28] = "readc",
+		[RISC_JUMP    >> 28] = "jump",
+		[RISC_SKIP    >> 28] = "skip",
+		[RISC_WRITERM >> 28] = "writerm",
+		[RISC_WRITECM >> 28] = "writecm",
+		[RISC_WRITECR >> 28] = "writecr",
+	};
+	static int incr[16] = {
+		[RISC_WRITE   >> 28] = 3,
+		[RISC_JUMP    >> 28] = 3,
+		[RISC_SKIP    >> 28] = 1,
+		[RISC_SYNC    >> 28] = 1,
+		[RISC_WRITERM >> 28] = 3,
+		[RISC_WRITECM >> 28] = 3,
+		[RISC_WRITECR >> 28] = 4,
+	};
+	static char *bits[] = {
+		"12",   "13",   "14",   "resync",
+		"cnt0", "cnt1", "18",   "19",
+		"20",   "21",   "22",   "23",
+		"irq1", "irq2", "eol",  "sol",
+	};
+	int i;
+
+	printk("0x%08x [ %s", risc,
+	       instr[risc >> 28] ? instr[risc >> 28] : "INVALID");
+	for (i = ARRAY_SIZE(bits) - 1; i >= 0; i--)
+		if (risc & (1 << (i + 12)))
+			printk(" %s", bits[i]);
+	printk(" count=%d ]\n", risc & 0xfff);
+	return incr[risc >> 28] ? incr[risc >> 28] : 1;
+}
+
+void cx23885_wakeup(struct cx23885_tsport *port,
+			   struct cx23885_dmaqueue *q, u32 count)
+{
+	struct cx23885_dev *dev = port->dev;
+	struct cx23885_buffer *buf;
+	int bc;
+
+	for (bc = 0;; bc++) {
+		if (list_empty(&q->active))
+			break;
+		buf = list_entry(q->active.next,
+				 struct cx23885_buffer, vb.queue);
+
+		/* count comes from the hw and is is 16bit wide --
+		 * this trick handles wrap-arounds correctly for
+		 * up to 32767 buffers in flight... */
+		if ((s16) (count - buf->count) < 0)
+			break;
+
+		do_gettimeofday(&buf->vb.ts);
+		dprintk(2, "[%p/%d] wakeup reg=%d buf=%d\n", buf, buf->vb.i,
+			count, buf->count);
+		buf->vb.state = VIDEOBUF_DONE;
+		list_del(&buf->vb.queue);
+		wake_up(&buf->vb.done);
+	}
+	if (list_empty(&q->active))
+		del_timer(&q->timeout);
+	else
+		mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT);
+	if (bc != 1)
+		printk(KERN_WARNING "%s: %d buffers handled (should be 1)\n",
+		       __func__, bc);
+}
+
+int cx23885_sram_channel_setup(struct cx23885_dev *dev,
+				      struct sram_channel *ch,
+				      unsigned int bpl, u32 risc)
+{
+	unsigned int i, lines;
+	u32 cdt;
+
+	if (ch->cmds_start == 0) {
+		dprintk(1, "%s() Erasing channel [%s]\n", __func__,
+			ch->name);
+		cx_write(ch->ptr1_reg, 0);
+		cx_write(ch->ptr2_reg, 0);
+		cx_write(ch->cnt2_reg, 0);
+		cx_write(ch->cnt1_reg, 0);
+		return 0;
+	} else {
+		dprintk(1, "%s() Configuring channel [%s]\n", __func__,
+			ch->name);
+	}
+
+	bpl   = (bpl + 7) & ~7; /* alignment */
+	cdt   = ch->cdt;
+	lines = ch->fifo_size / bpl;
+	if (lines > 6)
+		lines = 6;
+	BUG_ON(lines < 2);
+
+	cx_write(8 + 0, RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
+	cx_write(8 + 4, 8);
+	cx_write(8 + 8, 0);
+
+	/* write CDT */
+	for (i = 0; i < lines; i++) {
+		dprintk(2, "%s() 0x%08x <- 0x%08x\n", __func__, cdt + 16*i,
+			ch->fifo_start + bpl*i);
+		cx_write(cdt + 16*i, ch->fifo_start + bpl*i);
+		cx_write(cdt + 16*i +  4, 0);
+		cx_write(cdt + 16*i +  8, 0);
+		cx_write(cdt + 16*i + 12, 0);
+	}
+
+	/* write CMDS */
+	if (ch->jumponly)
+		cx_write(ch->cmds_start + 0, 8);
+	else
+		cx_write(ch->cmds_start + 0, risc);
+	cx_write(ch->cmds_start +  4, 0); /* 64 bits 63-32 */
+	cx_write(ch->cmds_start +  8, cdt);
+	cx_write(ch->cmds_start + 12, (lines*16) >> 3);
+	cx_write(ch->cmds_start + 16, ch->ctrl_start);
+	if (ch->jumponly)
+		cx_write(ch->cmds_start + 20, 0x80000000 | (64 >> 2));
+	else
+		cx_write(ch->cmds_start + 20, 64 >> 2);
+	for (i = 24; i < 80; i += 4)
+		cx_write(ch->cmds_start + i, 0);
+
+	/* fill registers */
+	cx_write(ch->ptr1_reg, ch->fifo_start);
+	cx_write(ch->ptr2_reg, cdt);
+	cx_write(ch->cnt2_reg, (lines*16) >> 3);
+	cx_write(ch->cnt1_reg, (bpl >> 3) - 1);
+
+	dprintk(2, "[bridge %d] sram setup %s: bpl=%d lines=%d\n",
+		dev->bridge,
+		ch->name,
+		bpl,
+		lines);
+
+	return 0;
+}
+
+void cx23885_sram_channel_dump(struct cx23885_dev *dev,
+				      struct sram_channel *ch)
+{
+	static char *name[] = {
+		"init risc lo",
+		"init risc hi",
+		"cdt base",
+		"cdt size",
+		"iq base",
+		"iq size",
+		"risc pc lo",
+		"risc pc hi",
+		"iq wr ptr",
+		"iq rd ptr",
+		"cdt current",
+		"pci target lo",
+		"pci target hi",
+		"line / byte",
+	};
+	u32 risc;
+	unsigned int i, j, n;
+
+	printk(KERN_WARNING "%s: %s - dma channel status dump\n",
+	       dev->name, ch->name);
+	for (i = 0; i < ARRAY_SIZE(name); i++)
+		printk(KERN_WARNING "%s:   cmds: %-15s: 0x%08x\n",
+		       dev->name, name[i],
+		       cx_read(ch->cmds_start + 4*i));
+
+	for (i = 0; i < 4; i++) {
+		risc = cx_read(ch->cmds_start + 4 * (i + 14));
+		printk(KERN_WARNING "%s:   risc%d: ", dev->name, i);
+		cx23885_risc_decode(risc);
+	}
+	for (i = 0; i < (64 >> 2); i += n) {
+		risc = cx_read(ch->ctrl_start + 4 * i);
+		/* No consideration for bits 63-32 */
+
+		printk(KERN_WARNING "%s:   (0x%08x) iq %x: ", dev->name,
+		       ch->ctrl_start + 4 * i, i);
+		n = cx23885_risc_decode(risc);
+		for (j = 1; j < n; j++) {
+			risc = cx_read(ch->ctrl_start + 4 * (i + j));
+			printk(KERN_WARNING "%s:   iq %x: 0x%08x [ arg #%d ]\n",
+			       dev->name, i+j, risc, j);
+		}
+	}
+
+	printk(KERN_WARNING "%s: fifo: 0x%08x -> 0x%x\n",
+	       dev->name, ch->fifo_start, ch->fifo_start+ch->fifo_size);
+	printk(KERN_WARNING "%s: ctrl: 0x%08x -> 0x%x\n",
+	       dev->name, ch->ctrl_start, ch->ctrl_start + 6*16);
+	printk(KERN_WARNING "%s:   ptr1_reg: 0x%08x\n",
+	       dev->name, cx_read(ch->ptr1_reg));
+	printk(KERN_WARNING "%s:   ptr2_reg: 0x%08x\n",
+	       dev->name, cx_read(ch->ptr2_reg));
+	printk(KERN_WARNING "%s:   cnt1_reg: 0x%08x\n",
+	       dev->name, cx_read(ch->cnt1_reg));
+	printk(KERN_WARNING "%s:   cnt2_reg: 0x%08x\n",
+	       dev->name, cx_read(ch->cnt2_reg));
+}
+
+static void cx23885_risc_disasm(struct cx23885_tsport *port,
+				struct btcx_riscmem *risc)
+{
+	struct cx23885_dev *dev = port->dev;
+	unsigned int i, j, n;
+
+	printk(KERN_INFO "%s: risc disasm: %p [dma=0x%08lx]\n",
+	       dev->name, risc->cpu, (unsigned long)risc->dma);
+	for (i = 0; i < (risc->size >> 2); i += n) {
+		printk(KERN_INFO "%s:   %04d: ", dev->name, i);
+		n = cx23885_risc_decode(le32_to_cpu(risc->cpu[i]));
+		for (j = 1; j < n; j++)
+			printk(KERN_INFO "%s:   %04d: 0x%08x [ arg #%d ]\n",
+			       dev->name, i + j, risc->cpu[i + j], j);
+		if (risc->cpu[i] == cpu_to_le32(RISC_JUMP))
+			break;
+	}
+}
+
+static void cx23885_shutdown(struct cx23885_dev *dev)
+{
+	/* disable RISC controller */
+	cx_write(DEV_CNTRL2, 0);
+
+	/* Disable all IR activity */
+	cx_write(IR_CNTRL_REG, 0);
+
+	/* Disable Video A/B activity */
+	cx_write(VID_A_DMA_CTL, 0);
+	cx_write(VID_B_DMA_CTL, 0);
+	cx_write(VID_C_DMA_CTL, 0);
+
+	/* Disable Audio activity */
+	cx_write(AUD_INT_DMA_CTL, 0);
+	cx_write(AUD_EXT_DMA_CTL, 0);
+
+	/* Disable Serial port */
+	cx_write(UART_CTL, 0);
+
+	/* Disable Interrupts */
+	cx23885_irq_disable_all(dev);
+	cx_write(VID_A_INT_MSK, 0);
+	cx_write(VID_B_INT_MSK, 0);
+	cx_write(VID_C_INT_MSK, 0);
+	cx_write(AUDIO_INT_INT_MSK, 0);
+	cx_write(AUDIO_EXT_INT_MSK, 0);
+
+}
+
+static void cx23885_reset(struct cx23885_dev *dev)
+{
+	dprintk(1, "%s()\n", __func__);
+
+	cx23885_shutdown(dev);
+
+	cx_write(PCI_INT_STAT, 0xffffffff);
+	cx_write(VID_A_INT_STAT, 0xffffffff);
+	cx_write(VID_B_INT_STAT, 0xffffffff);
+	cx_write(VID_C_INT_STAT, 0xffffffff);
+	cx_write(AUDIO_INT_INT_STAT, 0xffffffff);
+	cx_write(AUDIO_EXT_INT_STAT, 0xffffffff);
+	cx_write(CLK_DELAY, cx_read(CLK_DELAY) & 0x80000000);
+	cx_write(PAD_CTRL, 0x00500300);
+
+	mdelay(100);
+
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH01],
+		720*4, 0);
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH02], 128, 0);
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH03],
+		188*4, 0);
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH04], 128, 0);
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH05], 128, 0);
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH06],
+		188*4, 0);
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH07], 128, 0);
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH08], 128, 0);
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH09], 128, 0);
+
+	cx23885_gpio_setup(dev);
+}
+
+
+static int cx23885_pci_quirks(struct cx23885_dev *dev)
+{
+	dprintk(1, "%s()\n", __func__);
+
+	/* The cx23885 bridge has a weird bug which causes NMI to be asserted
+	 * when DMA begins if RDR_TLCTL0 bit4 is not cleared. It does not
+	 * occur on the cx23887 bridge.
+	 */
+	if (dev->bridge == CX23885_BRIDGE_885)
+		cx_clear(RDR_TLCTL0, 1 << 4);
+
+	return 0;
+}
+
+static int get_resources(struct cx23885_dev *dev)
+{
+	if (request_mem_region(pci_resource_start(dev->pci, 0),
+			       pci_resource_len(dev->pci, 0),
+			       dev->name))
+		return 0;
+
+	printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx\n",
+		dev->name, (unsigned long long)pci_resource_start(dev->pci, 0));
+
+	return -EBUSY;
+}
+
+static void cx23885_timeout(unsigned long data);
+int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
+				u32 reg, u32 mask, u32 value);
+
+static int cx23885_init_tsport(struct cx23885_dev *dev,
+	struct cx23885_tsport *port, int portno)
+{
+	dprintk(1, "%s(portno=%d)\n", __func__, portno);
+
+	/* Transport bus init dma queue  - Common settings */
+	port->dma_ctl_val        = 0x11; /* Enable RISC controller and Fifo */
+	port->ts_int_msk_val     = 0x1111; /* TS port bits for RISC */
+	port->vld_misc_val       = 0x0;
+	port->hw_sop_ctrl_val    = (0x47 << 16 | 188 << 4);
+
+	spin_lock_init(&port->slock);
+	port->dev = dev;
+	port->nr = portno;
+
+	INIT_LIST_HEAD(&port->mpegq.active);
+	INIT_LIST_HEAD(&port->mpegq.queued);
+	port->mpegq.timeout.function = cx23885_timeout;
+	port->mpegq.timeout.data = (unsigned long)port;
+	init_timer(&port->mpegq.timeout);
+
+	mutex_init(&port->frontends.lock);
+	INIT_LIST_HEAD(&port->frontends.felist);
+	port->frontends.active_fe_id = 0;
+
+	/* This should be hardcoded allow a single frontend
+	 * attachment to this tsport, keeping the -dvb.c
+	 * code clean and safe.
+	 */
+	if (!port->num_frontends)
+		port->num_frontends = 1;
+
+	switch (portno) {
+	case 1:
+		port->reg_gpcnt          = VID_B_GPCNT;
+		port->reg_gpcnt_ctl      = VID_B_GPCNT_CTL;
+		port->reg_dma_ctl        = VID_B_DMA_CTL;
+		port->reg_lngth          = VID_B_LNGTH;
+		port->reg_hw_sop_ctrl    = VID_B_HW_SOP_CTL;
+		port->reg_gen_ctrl       = VID_B_GEN_CTL;
+		port->reg_bd_pkt_status  = VID_B_BD_PKT_STATUS;
+		port->reg_sop_status     = VID_B_SOP_STATUS;
+		port->reg_fifo_ovfl_stat = VID_B_FIFO_OVFL_STAT;
+		port->reg_vld_misc       = VID_B_VLD_MISC;
+		port->reg_ts_clk_en      = VID_B_TS_CLK_EN;
+		port->reg_src_sel        = VID_B_SRC_SEL;
+		port->reg_ts_int_msk     = VID_B_INT_MSK;
+		port->reg_ts_int_stat    = VID_B_INT_STAT;
+		port->sram_chno          = SRAM_CH03; /* VID_B */
+		port->pci_irqmask        = 0x02; /* VID_B bit1 */
+		break;
+	case 2:
+		port->reg_gpcnt          = VID_C_GPCNT;
+		port->reg_gpcnt_ctl      = VID_C_GPCNT_CTL;
+		port->reg_dma_ctl        = VID_C_DMA_CTL;
+		port->reg_lngth          = VID_C_LNGTH;
+		port->reg_hw_sop_ctrl    = VID_C_HW_SOP_CTL;
+		port->reg_gen_ctrl       = VID_C_GEN_CTL;
+		port->reg_bd_pkt_status  = VID_C_BD_PKT_STATUS;
+		port->reg_sop_status     = VID_C_SOP_STATUS;
+		port->reg_fifo_ovfl_stat = VID_C_FIFO_OVFL_STAT;
+		port->reg_vld_misc       = VID_C_VLD_MISC;
+		port->reg_ts_clk_en      = VID_C_TS_CLK_EN;
+		port->reg_src_sel        = 0;
+		port->reg_ts_int_msk     = VID_C_INT_MSK;
+		port->reg_ts_int_stat    = VID_C_INT_STAT;
+		port->sram_chno          = SRAM_CH06; /* VID_C */
+		port->pci_irqmask        = 0x04; /* VID_C bit2 */
+		break;
+	default:
+		BUG();
+	}
+
+	cx23885_risc_stopper(dev->pci, &port->mpegq.stopper,
+		     port->reg_dma_ctl, port->dma_ctl_val, 0x00);
+
+	return 0;
+}
+
+static void cx23885_dev_checkrevision(struct cx23885_dev *dev)
+{
+	switch (cx_read(RDR_CFG2) & 0xff) {
+	case 0x00:
+		/* cx23885 */
+		dev->hwrevision = 0xa0;
+		break;
+	case 0x01:
+		/* CX23885-12Z */
+		dev->hwrevision = 0xa1;
+		break;
+	case 0x02:
+		/* CX23885-13Z/14Z */
+		dev->hwrevision = 0xb0;
+		break;
+	case 0x03:
+		if (dev->pci->device == 0x8880) {
+			/* CX23888-21Z/22Z */
+			dev->hwrevision = 0xc0;
+		} else {
+			/* CX23885-14Z */
+			dev->hwrevision = 0xa4;
+		}
+		break;
+	case 0x04:
+		if (dev->pci->device == 0x8880) {
+			/* CX23888-31Z */
+			dev->hwrevision = 0xd0;
+		} else {
+			/* CX23885-15Z, CX23888-31Z */
+			dev->hwrevision = 0xa5;
+		}
+		break;
+	case 0x0e:
+		/* CX23887-15Z */
+		dev->hwrevision = 0xc0;
+		break;
+	case 0x0f:
+		/* CX23887-14Z */
+		dev->hwrevision = 0xb1;
+		break;
+	default:
+		printk(KERN_ERR "%s() New hardware revision found 0x%x\n",
+			__func__, dev->hwrevision);
+	}
+	if (dev->hwrevision)
+		printk(KERN_INFO "%s() Hardware revision = 0x%02x\n",
+			__func__, dev->hwrevision);
+	else
+		printk(KERN_ERR "%s() Hardware revision unknown 0x%x\n",
+			__func__, dev->hwrevision);
+}
+
+/* Find the first v4l2_subdev member of the group id in hw */
+struct v4l2_subdev *cx23885_find_hw(struct cx23885_dev *dev, u32 hw)
+{
+	struct v4l2_subdev *result = NULL;
+	struct v4l2_subdev *sd;
+
+	spin_lock(&dev->v4l2_dev.lock);
+	v4l2_device_for_each_subdev(sd, &dev->v4l2_dev) {
+		if (sd->grp_id == hw) {
+			result = sd;
+			break;
+		}
+	}
+	spin_unlock(&dev->v4l2_dev.lock);
+	return result;
+}
+
+static int cx23885_dev_setup(struct cx23885_dev *dev)
+{
+	int i;
+
+	spin_lock_init(&dev->pci_irqmask_lock);
+
+	mutex_init(&dev->lock);
+	mutex_init(&dev->gpio_lock);
+
+	atomic_inc(&dev->refcount);
+
+	dev->nr = cx23885_devcount++;
+	sprintf(dev->name, "cx23885[%d]", dev->nr);
+
+	/* Configure the internal memory */
+	if (dev->pci->device == 0x8880) {
+		/* Could be 887 or 888, assume a default */
+		dev->bridge = CX23885_BRIDGE_887;
+		/* Apply a sensible clock frequency for the PCIe bridge */
+		dev->clk_freq = 25000000;
+		dev->sram_channels = cx23887_sram_channels;
+	} else
+	if (dev->pci->device == 0x8852) {
+		dev->bridge = CX23885_BRIDGE_885;
+		/* Apply a sensible clock frequency for the PCIe bridge */
+		dev->clk_freq = 28000000;
+		dev->sram_channels = cx23885_sram_channels;
+	} else
+		BUG();
+
+	dprintk(1, "%s() Memory configured for PCIe bridge type %d\n",
+		__func__, dev->bridge);
+
+	/* board config */
+	dev->board = UNSET;
+	if (card[dev->nr] < cx23885_bcount)
+		dev->board = card[dev->nr];
+	for (i = 0; UNSET == dev->board  &&  i < cx23885_idcount; i++)
+		if (dev->pci->subsystem_vendor == cx23885_subids[i].subvendor &&
+		    dev->pci->subsystem_device == cx23885_subids[i].subdevice)
+			dev->board = cx23885_subids[i].card;
+	if (UNSET == dev->board) {
+		dev->board = CX23885_BOARD_UNKNOWN;
+		cx23885_card_list(dev);
+	}
+
+	/* If the user specific a clk freq override, apply it */
+	if (cx23885_boards[dev->board].clk_freq > 0)
+		dev->clk_freq = cx23885_boards[dev->board].clk_freq;
+
+	dev->pci_bus  = dev->pci->bus->number;
+	dev->pci_slot = PCI_SLOT(dev->pci->devfn);
+	cx23885_irq_add(dev, 0x001f00);
+
+	/* External Master 1 Bus */
+	dev->i2c_bus[0].nr = 0;
+	dev->i2c_bus[0].dev = dev;
+	dev->i2c_bus[0].reg_stat  = I2C1_STAT;
+	dev->i2c_bus[0].reg_ctrl  = I2C1_CTRL;
+	dev->i2c_bus[0].reg_addr  = I2C1_ADDR;
+	dev->i2c_bus[0].reg_rdata = I2C1_RDATA;
+	dev->i2c_bus[0].reg_wdata = I2C1_WDATA;
+	dev->i2c_bus[0].i2c_period = (0x9d << 24); /* 100kHz */
+
+	/* External Master 2 Bus */
+	dev->i2c_bus[1].nr = 1;
+	dev->i2c_bus[1].dev = dev;
+	dev->i2c_bus[1].reg_stat  = I2C2_STAT;
+	dev->i2c_bus[1].reg_ctrl  = I2C2_CTRL;
+	dev->i2c_bus[1].reg_addr  = I2C2_ADDR;
+	dev->i2c_bus[1].reg_rdata = I2C2_RDATA;
+	dev->i2c_bus[1].reg_wdata = I2C2_WDATA;
+	dev->i2c_bus[1].i2c_period = (0x9d << 24); /* 100kHz */
+
+	/* Internal Master 3 Bus */
+	dev->i2c_bus[2].nr = 2;
+	dev->i2c_bus[2].dev = dev;
+	dev->i2c_bus[2].reg_stat  = I2C3_STAT;
+	dev->i2c_bus[2].reg_ctrl  = I2C3_CTRL;
+	dev->i2c_bus[2].reg_addr  = I2C3_ADDR;
+	dev->i2c_bus[2].reg_rdata = I2C3_RDATA;
+	dev->i2c_bus[2].reg_wdata = I2C3_WDATA;
+	dev->i2c_bus[2].i2c_period = (0x07 << 24); /* 1.95MHz */
+
+	if ((cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) ||
+		(cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER))
+		cx23885_init_tsport(dev, &dev->ts1, 1);
+
+	if ((cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) ||
+		(cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER))
+		cx23885_init_tsport(dev, &dev->ts2, 2);
+
+	if (get_resources(dev) < 0) {
+		printk(KERN_ERR "CORE %s No more PCIe resources for "
+		       "subsystem: %04x:%04x\n",
+		       dev->name, dev->pci->subsystem_vendor,
+		       dev->pci->subsystem_device);
+
+		cx23885_devcount--;
+		return -ENODEV;
+	}
+
+	/* PCIe stuff */
+	dev->lmmio = ioremap(pci_resource_start(dev->pci, 0),
+			     pci_resource_len(dev->pci, 0));
+
+	dev->bmmio = (u8 __iomem *)dev->lmmio;
+
+	printk(KERN_INFO "CORE %s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
+	       dev->name, dev->pci->subsystem_vendor,
+	       dev->pci->subsystem_device, cx23885_boards[dev->board].name,
+	       dev->board, card[dev->nr] == dev->board ?
+	       "insmod option" : "autodetected");
+
+	cx23885_pci_quirks(dev);
+
+	/* Assume some sensible defaults */
+	dev->tuner_type = cx23885_boards[dev->board].tuner_type;
+	dev->tuner_addr = cx23885_boards[dev->board].tuner_addr;
+	dev->tuner_bus = cx23885_boards[dev->board].tuner_bus;
+	dev->radio_type = cx23885_boards[dev->board].radio_type;
+	dev->radio_addr = cx23885_boards[dev->board].radio_addr;
+
+	dprintk(1, "%s() tuner_type = 0x%x tuner_addr = 0x%x tuner_bus = %d\n",
+		__func__, dev->tuner_type, dev->tuner_addr, dev->tuner_bus);
+	dprintk(1, "%s() radio_type = 0x%x radio_addr = 0x%x\n",
+		__func__, dev->radio_type, dev->radio_addr);
+
+	/* The cx23417 encoder has GPIO's that need to be initialised
+	 * before DVB, so that demodulators and tuners are out of
+	 * reset before DVB uses them.
+	 */
+	if ((cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) ||
+		(cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER))
+			cx23885_mc417_init(dev);
+
+	/* init hardware */
+	cx23885_reset(dev);
+
+	cx23885_i2c_register(&dev->i2c_bus[0]);
+	cx23885_i2c_register(&dev->i2c_bus[1]);
+	cx23885_i2c_register(&dev->i2c_bus[2]);
+	cx23885_card_setup(dev);
+	call_all(dev, core, s_power, 0);
+	cx23885_ir_init(dev);
+
+	if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO) {
+		if (cx23885_video_register(dev) < 0) {
+			printk(KERN_ERR "%s() Failed to register analog "
+				"video adapters on VID_A\n", __func__);
+		}
+	}
+
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) {
+		if (cx23885_boards[dev->board].num_fds_portb)
+			dev->ts1.num_frontends =
+				cx23885_boards[dev->board].num_fds_portb;
+		if (cx23885_dvb_register(&dev->ts1) < 0) {
+			printk(KERN_ERR "%s() Failed to register dvb adapters on VID_B\n",
+			       __func__);
+		}
+	} else
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) {
+		if (cx23885_417_register(dev) < 0) {
+			printk(KERN_ERR
+				"%s() Failed to register 417 on VID_B\n",
+			       __func__);
+		}
+	}
+
+	if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) {
+		if (cx23885_boards[dev->board].num_fds_portc)
+			dev->ts2.num_frontends =
+				cx23885_boards[dev->board].num_fds_portc;
+		if (cx23885_dvb_register(&dev->ts2) < 0) {
+			printk(KERN_ERR
+				"%s() Failed to register dvb on VID_C\n",
+			       __func__);
+		}
+	} else
+	if (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER) {
+		if (cx23885_417_register(dev) < 0) {
+			printk(KERN_ERR
+				"%s() Failed to register 417 on VID_C\n",
+			       __func__);
+		}
+	}
+
+	cx23885_dev_checkrevision(dev);
+
+	/* disable MSI for NetUP cards, otherwise CI is not working */
+	if (cx23885_boards[dev->board].ci_type > 0)
+		cx_clear(RDR_RDRCTL1, 1 << 8);
+
+	switch (dev->board) {
+	case CX23885_BOARD_TEVII_S470:
+	case CX23885_BOARD_TEVII_S471:
+		cx_clear(RDR_RDRCTL1, 1 << 8);
+		break;
+	}
+
+	return 0;
+}
+
+static void cx23885_dev_unregister(struct cx23885_dev *dev)
+{
+	release_mem_region(pci_resource_start(dev->pci, 0),
+			   pci_resource_len(dev->pci, 0));
+
+	if (!atomic_dec_and_test(&dev->refcount))
+		return;
+
+	if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO)
+		cx23885_video_unregister(dev);
+
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB)
+		cx23885_dvb_unregister(&dev->ts1);
+
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER)
+		cx23885_417_unregister(dev);
+
+	if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB)
+		cx23885_dvb_unregister(&dev->ts2);
+
+	if (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER)
+		cx23885_417_unregister(dev);
+
+	cx23885_i2c_unregister(&dev->i2c_bus[2]);
+	cx23885_i2c_unregister(&dev->i2c_bus[1]);
+	cx23885_i2c_unregister(&dev->i2c_bus[0]);
+
+	iounmap(dev->lmmio);
+}
+
+static __le32 *cx23885_risc_field(__le32 *rp, struct scatterlist *sglist,
+			       unsigned int offset, u32 sync_line,
+			       unsigned int bpl, unsigned int padding,
+			       unsigned int lines,  unsigned int lpi)
+{
+	struct scatterlist *sg;
+	unsigned int line, todo, sol;
+
+	/* sync instruction */
+	if (sync_line != NO_SYNC_LINE)
+		*(rp++) = cpu_to_le32(RISC_RESYNC | sync_line);
+
+	/* scan lines */
+	sg = sglist;
+	for (line = 0; line < lines; line++) {
+		while (offset && offset >= sg_dma_len(sg)) {
+			offset -= sg_dma_len(sg);
+			sg++;
+		}
+
+		if (lpi && line > 0 && !(line % lpi))
+			sol = RISC_SOL | RISC_IRQ1 | RISC_CNT_INC;
+		else
+			sol = RISC_SOL;
+
+		if (bpl <= sg_dma_len(sg)-offset) {
+			/* fits into current chunk */
+			*(rp++) = cpu_to_le32(RISC_WRITE|sol|RISC_EOL|bpl);
+			*(rp++) = cpu_to_le32(sg_dma_address(sg)+offset);
+			*(rp++) = cpu_to_le32(0); /* bits 63-32 */
+			offset += bpl;
+		} else {
+			/* scanline needs to be split */
+			todo = bpl;
+			*(rp++) = cpu_to_le32(RISC_WRITE|sol|
+					    (sg_dma_len(sg)-offset));
+			*(rp++) = cpu_to_le32(sg_dma_address(sg)+offset);
+			*(rp++) = cpu_to_le32(0); /* bits 63-32 */
+			todo -= (sg_dma_len(sg)-offset);
+			offset = 0;
+			sg++;
+			while (todo > sg_dma_len(sg)) {
+				*(rp++) = cpu_to_le32(RISC_WRITE|
+						    sg_dma_len(sg));
+				*(rp++) = cpu_to_le32(sg_dma_address(sg));
+				*(rp++) = cpu_to_le32(0); /* bits 63-32 */
+				todo -= sg_dma_len(sg);
+				sg++;
+			}
+			*(rp++) = cpu_to_le32(RISC_WRITE|RISC_EOL|todo);
+			*(rp++) = cpu_to_le32(sg_dma_address(sg));
+			*(rp++) = cpu_to_le32(0); /* bits 63-32 */
+			offset += todo;
+		}
+		offset += padding;
+	}
+
+	return rp;
+}
+
+int cx23885_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc,
+			struct scatterlist *sglist, unsigned int top_offset,
+			unsigned int bottom_offset, unsigned int bpl,
+			unsigned int padding, unsigned int lines)
+{
+	u32 instructions, fields;
+	__le32 *rp;
+	int rc;
+
+	fields = 0;
+	if (UNSET != top_offset)
+		fields++;
+	if (UNSET != bottom_offset)
+		fields++;
+
+	/* estimate risc mem: worst case is one write per page border +
+	   one write per scan line + syncs + jump (all 2 dwords).  Padding
+	   can cause next bpl to start close to a page border.  First DMA
+	   region may be smaller than PAGE_SIZE */
+	/* write and jump need and extra dword */
+	instructions  = fields * (1 + ((bpl + padding) * lines)
+		/ PAGE_SIZE + lines);
+	instructions += 2;
+	rc = btcx_riscmem_alloc(pci, risc, instructions*12);
+	if (rc < 0)
+		return rc;
+
+	/* write risc instructions */
+	rp = risc->cpu;
+	if (UNSET != top_offset)
+		rp = cx23885_risc_field(rp, sglist, top_offset, 0,
+					bpl, padding, lines, 0);
+	if (UNSET != bottom_offset)
+		rp = cx23885_risc_field(rp, sglist, bottom_offset, 0x200,
+					bpl, padding, lines, 0);
+
+	/* save pointer to jmp instruction address */
+	risc->jmp = rp;
+	BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size);
+	return 0;
+}
+
+int cx23885_risc_databuffer(struct pci_dev *pci,
+				   struct btcx_riscmem *risc,
+				   struct scatterlist *sglist,
+				   unsigned int bpl,
+				   unsigned int lines, unsigned int lpi)
+{
+	u32 instructions;
+	__le32 *rp;
+	int rc;
+
+	/* estimate risc mem: worst case is one write per page border +
+	   one write per scan line + syncs + jump (all 2 dwords).  Here
+	   there is no padding and no sync.  First DMA region may be smaller
+	   than PAGE_SIZE */
+	/* Jump and write need an extra dword */
+	instructions  = 1 + (bpl * lines) / PAGE_SIZE + lines;
+	instructions += 1;
+
+	rc = btcx_riscmem_alloc(pci, risc, instructions*12);
+	if (rc < 0)
+		return rc;
+
+	/* write risc instructions */
+	rp = risc->cpu;
+	rp = cx23885_risc_field(rp, sglist, 0, NO_SYNC_LINE,
+				bpl, 0, lines, lpi);
+
+	/* save pointer to jmp instruction address */
+	risc->jmp = rp;
+	BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size);
+	return 0;
+}
+
+int cx23885_risc_vbibuffer(struct pci_dev *pci, struct btcx_riscmem *risc,
+			struct scatterlist *sglist, unsigned int top_offset,
+			unsigned int bottom_offset, unsigned int bpl,
+			unsigned int padding, unsigned int lines)
+{
+	u32 instructions, fields;
+	__le32 *rp;
+	int rc;
+
+	fields = 0;
+	if (UNSET != top_offset)
+		fields++;
+	if (UNSET != bottom_offset)
+		fields++;
+
+	/* estimate risc mem: worst case is one write per page border +
+	   one write per scan line + syncs + jump (all 2 dwords).  Padding
+	   can cause next bpl to start close to a page border.  First DMA
+	   region may be smaller than PAGE_SIZE */
+	/* write and jump need and extra dword */
+	instructions  = fields * (1 + ((bpl + padding) * lines)
+		/ PAGE_SIZE + lines);
+	instructions += 2;
+	rc = btcx_riscmem_alloc(pci, risc, instructions*12);
+	if (rc < 0)
+		return rc;
+	/* write risc instructions */
+	rp = risc->cpu;
+
+	/* Sync to line 6, so US CC line 21 will appear in line '12'
+	 * in the userland vbi payload */
+	if (UNSET != top_offset)
+		rp = cx23885_risc_field(rp, sglist, top_offset, 6,
+					bpl, padding, lines, 0);
+
+	if (UNSET != bottom_offset)
+		rp = cx23885_risc_field(rp, sglist, bottom_offset, 0x207,
+					bpl, padding, lines, 0);
+
+
+
+	/* save pointer to jmp instruction address */
+	risc->jmp = rp;
+	BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size);
+	return 0;
+}
+
+
+int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
+				u32 reg, u32 mask, u32 value)
+{
+	__le32 *rp;
+	int rc;
+
+	rc = btcx_riscmem_alloc(pci, risc, 4*16);
+	if (rc < 0)
+		return rc;
+
+	/* write risc instructions */
+	rp = risc->cpu;
+	*(rp++) = cpu_to_le32(RISC_WRITECR  | RISC_IRQ2);
+	*(rp++) = cpu_to_le32(reg);
+	*(rp++) = cpu_to_le32(value);
+	*(rp++) = cpu_to_le32(mask);
+	*(rp++) = cpu_to_le32(RISC_JUMP);
+	*(rp++) = cpu_to_le32(risc->dma);
+	*(rp++) = cpu_to_le32(0); /* bits 63-32 */
+	return 0;
+}
+
+void cx23885_free_buffer(struct videobuf_queue *q, struct cx23885_buffer *buf)
+{
+	struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb);
+
+	BUG_ON(in_interrupt());
+	videobuf_waiton(q, &buf->vb, 0, 0);
+	videobuf_dma_unmap(q->dev, dma);
+	videobuf_dma_free(dma);
+	btcx_riscmem_free(to_pci_dev(q->dev), &buf->risc);
+	buf->vb.state = VIDEOBUF_NEEDS_INIT;
+}
+
+static void cx23885_tsport_reg_dump(struct cx23885_tsport *port)
+{
+	struct cx23885_dev *dev = port->dev;
+
+	dprintk(1, "%s() Register Dump\n", __func__);
+	dprintk(1, "%s() DEV_CNTRL2               0x%08X\n", __func__,
+		cx_read(DEV_CNTRL2));
+	dprintk(1, "%s() PCI_INT_MSK              0x%08X\n", __func__,
+		cx23885_irq_get_mask(dev));
+	dprintk(1, "%s() AUD_INT_INT_MSK          0x%08X\n", __func__,
+		cx_read(AUDIO_INT_INT_MSK));
+	dprintk(1, "%s() AUD_INT_DMA_CTL          0x%08X\n", __func__,
+		cx_read(AUD_INT_DMA_CTL));
+	dprintk(1, "%s() AUD_EXT_INT_MSK          0x%08X\n", __func__,
+		cx_read(AUDIO_EXT_INT_MSK));
+	dprintk(1, "%s() AUD_EXT_DMA_CTL          0x%08X\n", __func__,
+		cx_read(AUD_EXT_DMA_CTL));
+	dprintk(1, "%s() PAD_CTRL                 0x%08X\n", __func__,
+		cx_read(PAD_CTRL));
+	dprintk(1, "%s() ALT_PIN_OUT_SEL          0x%08X\n", __func__,
+		cx_read(ALT_PIN_OUT_SEL));
+	dprintk(1, "%s() GPIO2                    0x%08X\n", __func__,
+		cx_read(GPIO2));
+	dprintk(1, "%s() gpcnt(0x%08X)          0x%08X\n", __func__,
+		port->reg_gpcnt, cx_read(port->reg_gpcnt));
+	dprintk(1, "%s() gpcnt_ctl(0x%08X)      0x%08x\n", __func__,
+		port->reg_gpcnt_ctl, cx_read(port->reg_gpcnt_ctl));
+	dprintk(1, "%s() dma_ctl(0x%08X)        0x%08x\n", __func__,
+		port->reg_dma_ctl, cx_read(port->reg_dma_ctl));
+	if (port->reg_src_sel)
+		dprintk(1, "%s() src_sel(0x%08X)        0x%08x\n", __func__,
+			port->reg_src_sel, cx_read(port->reg_src_sel));
+	dprintk(1, "%s() lngth(0x%08X)          0x%08x\n", __func__,
+		port->reg_lngth, cx_read(port->reg_lngth));
+	dprintk(1, "%s() hw_sop_ctrl(0x%08X)    0x%08x\n", __func__,
+		port->reg_hw_sop_ctrl, cx_read(port->reg_hw_sop_ctrl));
+	dprintk(1, "%s() gen_ctrl(0x%08X)       0x%08x\n", __func__,
+		port->reg_gen_ctrl, cx_read(port->reg_gen_ctrl));
+	dprintk(1, "%s() bd_pkt_status(0x%08X)  0x%08x\n", __func__,
+		port->reg_bd_pkt_status, cx_read(port->reg_bd_pkt_status));
+	dprintk(1, "%s() sop_status(0x%08X)     0x%08x\n", __func__,
+		port->reg_sop_status, cx_read(port->reg_sop_status));
+	dprintk(1, "%s() fifo_ovfl_stat(0x%08X) 0x%08x\n", __func__,
+		port->reg_fifo_ovfl_stat, cx_read(port->reg_fifo_ovfl_stat));
+	dprintk(1, "%s() vld_misc(0x%08X)       0x%08x\n", __func__,
+		port->reg_vld_misc, cx_read(port->reg_vld_misc));
+	dprintk(1, "%s() ts_clk_en(0x%08X)      0x%08x\n", __func__,
+		port->reg_ts_clk_en, cx_read(port->reg_ts_clk_en));
+	dprintk(1, "%s() ts_int_msk(0x%08X)     0x%08x\n", __func__,
+		port->reg_ts_int_msk, cx_read(port->reg_ts_int_msk));
+}
+
+static int cx23885_start_dma(struct cx23885_tsport *port,
+			     struct cx23885_dmaqueue *q,
+			     struct cx23885_buffer   *buf)
+{
+	struct cx23885_dev *dev = port->dev;
+	u32 reg;
+
+	dprintk(1, "%s() w: %d, h: %d, f: %d\n", __func__,
+		buf->vb.width, buf->vb.height, buf->vb.field);
+
+	/* Stop the fifo and risc engine for this port */
+	cx_clear(port->reg_dma_ctl, port->dma_ctl_val);
+
+	/* setup fifo + format */
+	cx23885_sram_channel_setup(dev,
+				   &dev->sram_channels[port->sram_chno],
+				   port->ts_packet_size, buf->risc.dma);
+	if (debug > 5) {
+		cx23885_sram_channel_dump(dev,
+			&dev->sram_channels[port->sram_chno]);
+		cx23885_risc_disasm(port, &buf->risc);
+	}
+
+	/* write TS length to chip */
+	cx_write(port->reg_lngth, buf->vb.width);
+
+	if ((!(cx23885_boards[dev->board].portb & CX23885_MPEG_DVB)) &&
+		(!(cx23885_boards[dev->board].portc & CX23885_MPEG_DVB))) {
+		printk("%s() Unsupported .portb/c (0x%08x)/(0x%08x)\n",
+			__func__,
+			cx23885_boards[dev->board].portb,
+			cx23885_boards[dev->board].portc);
+		return -EINVAL;
+	}
+
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER)
+		cx23885_av_clk(dev, 0);
+
+	udelay(100);
+
+	/* If the port supports SRC SELECT, configure it */
+	if (port->reg_src_sel)
+		cx_write(port->reg_src_sel, port->src_sel_val);
+
+	cx_write(port->reg_hw_sop_ctrl, port->hw_sop_ctrl_val);
+	cx_write(port->reg_ts_clk_en, port->ts_clk_en_val);
+	cx_write(port->reg_vld_misc, port->vld_misc_val);
+	cx_write(port->reg_gen_ctrl, port->gen_ctrl_val);
+	udelay(100);
+
+	/* NOTE: this is 2 (reserved) for portb, does it matter? */
+	/* reset counter to zero */
+	cx_write(port->reg_gpcnt_ctl, 3);
+	q->count = 1;
+
+	/* Set VIDB pins to input */
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) {
+		reg = cx_read(PAD_CTRL);
+		reg &= ~0x3; /* Clear TS1_OE & TS1_SOP_OE */
+		cx_write(PAD_CTRL, reg);
+	}
+
+	/* Set VIDC pins to input */
+	if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) {
+		reg = cx_read(PAD_CTRL);
+		reg &= ~0x4; /* Clear TS2_SOP_OE */
+		cx_write(PAD_CTRL, reg);
+	}
+
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) {
+
+		reg = cx_read(PAD_CTRL);
+		reg = reg & ~0x1;    /* Clear TS1_OE */
+
+		/* FIXME, bit 2 writing here is questionable */
+		/* set TS1_SOP_OE and TS1_OE_HI */
+		reg = reg | 0xa;
+		cx_write(PAD_CTRL, reg);
+
+		/* FIXME and these two registers should be documented. */
+		cx_write(CLK_DELAY, cx_read(CLK_DELAY) | 0x80000011);
+		cx_write(ALT_PIN_OUT_SEL, 0x10100045);
+	}
+
+	switch (dev->bridge) {
+	case CX23885_BRIDGE_885:
+	case CX23885_BRIDGE_887:
+	case CX23885_BRIDGE_888:
+		/* enable irqs */
+		dprintk(1, "%s() enabling TS int's and DMA\n", __func__);
+		cx_set(port->reg_ts_int_msk,  port->ts_int_msk_val);
+		cx_set(port->reg_dma_ctl, port->dma_ctl_val);
+		cx23885_irq_add(dev, port->pci_irqmask);
+		cx23885_irq_enable_all(dev);
+		break;
+	default:
+		BUG();
+	}
+
+	cx_set(DEV_CNTRL2, (1<<5)); /* Enable RISC controller */
+
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER)
+		cx23885_av_clk(dev, 1);
+
+	if (debug > 4)
+		cx23885_tsport_reg_dump(port);
+
+	return 0;
+}
+
+static int cx23885_stop_dma(struct cx23885_tsport *port)
+{
+	struct cx23885_dev *dev = port->dev;
+	u32 reg;
+
+	dprintk(1, "%s()\n", __func__);
+
+	/* Stop interrupts and DMA */
+	cx_clear(port->reg_ts_int_msk, port->ts_int_msk_val);
+	cx_clear(port->reg_dma_ctl, port->dma_ctl_val);
+
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) {
+
+		reg = cx_read(PAD_CTRL);
+
+		/* Set TS1_OE */
+		reg = reg | 0x1;
+
+		/* clear TS1_SOP_OE and TS1_OE_HI */
+		reg = reg & ~0xa;
+		cx_write(PAD_CTRL, reg);
+		cx_write(port->reg_src_sel, 0);
+		cx_write(port->reg_gen_ctrl, 8);
+
+	}
+
+	if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER)
+		cx23885_av_clk(dev, 0);
+
+	return 0;
+}
+
+int cx23885_restart_queue(struct cx23885_tsport *port,
+				struct cx23885_dmaqueue *q)
+{
+	struct cx23885_dev *dev = port->dev;
+	struct cx23885_buffer *buf;
+
+	dprintk(5, "%s()\n", __func__);
+	if (list_empty(&q->active)) {
+		struct cx23885_buffer *prev;
+		prev = NULL;
+
+		dprintk(5, "%s() queue is empty\n", __func__);
+
+		for (;;) {
+			if (list_empty(&q->queued))
+				return 0;
+			buf = list_entry(q->queued.next, struct cx23885_buffer,
+					 vb.queue);
+			if (NULL == prev) {
+				list_del(&buf->vb.queue);
+				list_add_tail(&buf->vb.queue, &q->active);
+				cx23885_start_dma(port, q, buf);
+				buf->vb.state = VIDEOBUF_ACTIVE;
+				buf->count    = q->count++;
+				mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
+				dprintk(5, "[%p/%d] restart_queue - f/active\n",
+					buf, buf->vb.i);
+
+			} else if (prev->vb.width  == buf->vb.width  &&
+				   prev->vb.height == buf->vb.height &&
+				   prev->fmt       == buf->fmt) {
+				list_del(&buf->vb.queue);
+				list_add_tail(&buf->vb.queue, &q->active);
+				buf->vb.state = VIDEOBUF_ACTIVE;
+				buf->count    = q->count++;
+				prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
+				/* 64 bit bits 63-32 */
+				prev->risc.jmp[2] = cpu_to_le32(0);
+				dprintk(5, "[%p/%d] restart_queue - m/active\n",
+					buf, buf->vb.i);
+			} else {
+				return 0;
+			}
+			prev = buf;
+		}
+		return 0;
+	}
+
+	buf = list_entry(q->active.next, struct cx23885_buffer, vb.queue);
+	dprintk(2, "restart_queue [%p/%d]: restart dma\n",
+		buf, buf->vb.i);
+	cx23885_start_dma(port, q, buf);
+	list_for_each_entry(buf, &q->active, vb.queue)
+		buf->count = q->count++;
+	mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT);
+	return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+int cx23885_buf_prepare(struct videobuf_queue *q, struct cx23885_tsport *port,
+			struct cx23885_buffer *buf, enum v4l2_field field)
+{
+	struct cx23885_dev *dev = port->dev;
+	int size = port->ts_packet_size * port->ts_packet_count;
+	int rc;
+
+	dprintk(1, "%s: %p\n", __func__, buf);
+	if (0 != buf->vb.baddr  &&  buf->vb.bsize < size)
+		return -EINVAL;
+
+	if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
+		buf->vb.width  = port->ts_packet_size;
+		buf->vb.height = port->ts_packet_count;
+		buf->vb.size   = size;
+		buf->vb.field  = field /*V4L2_FIELD_TOP*/;
+
+		rc = videobuf_iolock(q, &buf->vb, NULL);
+		if (0 != rc)
+			goto fail;
+		cx23885_risc_databuffer(dev->pci, &buf->risc,
+					videobuf_to_dma(&buf->vb)->sglist,
+					buf->vb.width, buf->vb.height, 0);
+	}
+	buf->vb.state = VIDEOBUF_PREPARED;
+	return 0;
+
+ fail:
+	cx23885_free_buffer(q, buf);
+	return rc;
+}
+
+void cx23885_buf_queue(struct cx23885_tsport *port, struct cx23885_buffer *buf)
+{
+	struct cx23885_buffer    *prev;
+	struct cx23885_dev *dev = port->dev;
+	struct cx23885_dmaqueue  *cx88q = &port->mpegq;
+
+	/* add jump to stopper */
+	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
+	buf->risc.jmp[1] = cpu_to_le32(cx88q->stopper.dma);
+	buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */
+
+	if (list_empty(&cx88q->active)) {
+		dprintk(1, "queue is empty - first active\n");
+		list_add_tail(&buf->vb.queue, &cx88q->active);
+		cx23885_start_dma(port, cx88q, buf);
+		buf->vb.state = VIDEOBUF_ACTIVE;
+		buf->count    = cx88q->count++;
+		mod_timer(&cx88q->timeout, jiffies + BUFFER_TIMEOUT);
+		dprintk(1, "[%p/%d] %s - first active\n",
+			buf, buf->vb.i, __func__);
+	} else {
+		dprintk(1, "queue is not empty - append to active\n");
+		prev = list_entry(cx88q->active.prev, struct cx23885_buffer,
+				  vb.queue);
+		list_add_tail(&buf->vb.queue, &cx88q->active);
+		buf->vb.state = VIDEOBUF_ACTIVE;
+		buf->count    = cx88q->count++;
+		prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
+		prev->risc.jmp[2] = cpu_to_le32(0); /* 64 bit bits 63-32 */
+		dprintk(1, "[%p/%d] %s - append to active\n",
+			 buf, buf->vb.i, __func__);
+	}
+}
+
+/* ----------------------------------------------------------- */
+
+static void do_cancel_buffers(struct cx23885_tsport *port, char *reason,
+			      int restart)
+{
+	struct cx23885_dev *dev = port->dev;
+	struct cx23885_dmaqueue *q = &port->mpegq;
+	struct cx23885_buffer *buf;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->slock, flags);
+	while (!list_empty(&q->active)) {
+		buf = list_entry(q->active.next, struct cx23885_buffer,
+				 vb.queue);
+		list_del(&buf->vb.queue);
+		buf->vb.state = VIDEOBUF_ERROR;
+		wake_up(&buf->vb.done);
+		dprintk(1, "[%p/%d] %s - dma=0x%08lx\n",
+			buf, buf->vb.i, reason, (unsigned long)buf->risc.dma);
+	}
+	if (restart) {
+		dprintk(1, "restarting queue\n");
+		cx23885_restart_queue(port, q);
+	}
+	spin_unlock_irqrestore(&port->slock, flags);
+}
+
+void cx23885_cancel_buffers(struct cx23885_tsport *port)
+{
+	struct cx23885_dev *dev = port->dev;
+	struct cx23885_dmaqueue *q = &port->mpegq;
+
+	dprintk(1, "%s()\n", __func__);
+	del_timer_sync(&q->timeout);
+	cx23885_stop_dma(port);
+	do_cancel_buffers(port, "cancel", 0);
+}
+
+static void cx23885_timeout(unsigned long data)
+{
+	struct cx23885_tsport *port = (struct cx23885_tsport *)data;
+	struct cx23885_dev *dev = port->dev;
+
+	dprintk(1, "%s()\n", __func__);
+
+	if (debug > 5)
+		cx23885_sram_channel_dump(dev,
+			&dev->sram_channels[port->sram_chno]);
+
+	cx23885_stop_dma(port);
+	do_cancel_buffers(port, "timeout", 1);
+}
+
+int cx23885_irq_417(struct cx23885_dev *dev, u32 status)
+{
+	/* FIXME: port1 assumption here. */
+	struct cx23885_tsport *port = &dev->ts1;
+	int count = 0;
+	int handled = 0;
+
+	if (status == 0)
+		return handled;
+
+	count = cx_read(port->reg_gpcnt);
+	dprintk(7, "status: 0x%08x  mask: 0x%08x count: 0x%x\n",
+		status, cx_read(port->reg_ts_int_msk), count);
+
+	if ((status & VID_B_MSK_BAD_PKT)         ||
+		(status & VID_B_MSK_OPC_ERR)     ||
+		(status & VID_B_MSK_VBI_OPC_ERR) ||
+		(status & VID_B_MSK_SYNC)        ||
+		(status & VID_B_MSK_VBI_SYNC)    ||
+		(status & VID_B_MSK_OF)          ||
+		(status & VID_B_MSK_VBI_OF)) {
+		printk(KERN_ERR "%s: V4L mpeg risc op code error, status "
+			"= 0x%x\n", dev->name, status);
+		if (status & VID_B_MSK_BAD_PKT)
+			dprintk(1, "        VID_B_MSK_BAD_PKT\n");
+		if (status & VID_B_MSK_OPC_ERR)
+			dprintk(1, "        VID_B_MSK_OPC_ERR\n");
+		if (status & VID_B_MSK_VBI_OPC_ERR)
+			dprintk(1, "        VID_B_MSK_VBI_OPC_ERR\n");
+		if (status & VID_B_MSK_SYNC)
+			dprintk(1, "        VID_B_MSK_SYNC\n");
+		if (status & VID_B_MSK_VBI_SYNC)
+			dprintk(1, "        VID_B_MSK_VBI_SYNC\n");
+		if (status & VID_B_MSK_OF)
+			dprintk(1, "        VID_B_MSK_OF\n");
+		if (status & VID_B_MSK_VBI_OF)
+			dprintk(1, "        VID_B_MSK_VBI_OF\n");
+
+		cx_clear(port->reg_dma_ctl, port->dma_ctl_val);
+		cx23885_sram_channel_dump(dev,
+			&dev->sram_channels[port->sram_chno]);
+		cx23885_417_check_encoder(dev);
+	} else if (status & VID_B_MSK_RISCI1) {
+		dprintk(7, "        VID_B_MSK_RISCI1\n");
+		spin_lock(&port->slock);
+		cx23885_wakeup(port, &port->mpegq, count);
+		spin_unlock(&port->slock);
+	} else if (status & VID_B_MSK_RISCI2) {
+		dprintk(7, "        VID_B_MSK_RISCI2\n");
+		spin_lock(&port->slock);
+		cx23885_restart_queue(port, &port->mpegq);
+		spin_unlock(&port->slock);
+	}
+	if (status) {
+		cx_write(port->reg_ts_int_stat, status);
+		handled = 1;
+	}
+
+	return handled;
+}
+
+static int cx23885_irq_ts(struct cx23885_tsport *port, u32 status)
+{
+	struct cx23885_dev *dev = port->dev;
+	int handled = 0;
+	u32 count;
+
+	if ((status & VID_BC_MSK_OPC_ERR) ||
+		(status & VID_BC_MSK_BAD_PKT) ||
+		(status & VID_BC_MSK_SYNC) ||
+		(status & VID_BC_MSK_OF)) {
+
+		if (status & VID_BC_MSK_OPC_ERR)
+			dprintk(7, " (VID_BC_MSK_OPC_ERR 0x%08x)\n",
+				VID_BC_MSK_OPC_ERR);
+
+		if (status & VID_BC_MSK_BAD_PKT)
+			dprintk(7, " (VID_BC_MSK_BAD_PKT 0x%08x)\n",
+				VID_BC_MSK_BAD_PKT);
+
+		if (status & VID_BC_MSK_SYNC)
+			dprintk(7, " (VID_BC_MSK_SYNC    0x%08x)\n",
+				VID_BC_MSK_SYNC);
+
+		if (status & VID_BC_MSK_OF)
+			dprintk(7, " (VID_BC_MSK_OF      0x%08x)\n",
+				VID_BC_MSK_OF);
+
+		printk(KERN_ERR "%s: mpeg risc op code error\n", dev->name);
+
+		cx_clear(port->reg_dma_ctl, port->dma_ctl_val);
+		cx23885_sram_channel_dump(dev,
+			&dev->sram_channels[port->sram_chno]);
+
+	} else if (status & VID_BC_MSK_RISCI1) {
+
+		dprintk(7, " (RISCI1            0x%08x)\n", VID_BC_MSK_RISCI1);
+
+		spin_lock(&port->slock);
+		count = cx_read(port->reg_gpcnt);
+		cx23885_wakeup(port, &port->mpegq, count);
+		spin_unlock(&port->slock);
+
+	} else if (status & VID_BC_MSK_RISCI2) {
+
+		dprintk(7, " (RISCI2            0x%08x)\n", VID_BC_MSK_RISCI2);
+
+		spin_lock(&port->slock);
+		cx23885_restart_queue(port, &port->mpegq);
+		spin_unlock(&port->slock);
+
+	}
+	if (status) {
+		cx_write(port->reg_ts_int_stat, status);
+		handled = 1;
+	}
+
+	return handled;
+}
+
+static irqreturn_t cx23885_irq(int irq, void *dev_id)
+{
+	struct cx23885_dev *dev = dev_id;
+	struct cx23885_tsport *ts1 = &dev->ts1;
+	struct cx23885_tsport *ts2 = &dev->ts2;
+	u32 pci_status, pci_mask;
+	u32 vida_status, vida_mask;
+	u32 audint_status, audint_mask;
+	u32 ts1_status, ts1_mask;
+	u32 ts2_status, ts2_mask;
+	int vida_count = 0, ts1_count = 0, ts2_count = 0, handled = 0;
+	int audint_count = 0;
+	bool subdev_handled;
+
+	pci_status = cx_read(PCI_INT_STAT);
+	pci_mask = cx23885_irq_get_mask(dev);
+	vida_status = cx_read(VID_A_INT_STAT);
+	vida_mask = cx_read(VID_A_INT_MSK);
+	audint_status = cx_read(AUDIO_INT_INT_STAT);
+	audint_mask = cx_read(AUDIO_INT_INT_MSK);
+	ts1_status = cx_read(VID_B_INT_STAT);
+	ts1_mask = cx_read(VID_B_INT_MSK);
+	ts2_status = cx_read(VID_C_INT_STAT);
+	ts2_mask = cx_read(VID_C_INT_MSK);
+
+	if ((pci_status == 0) && (ts2_status == 0) && (ts1_status == 0))
+		goto out;
+
+	vida_count = cx_read(VID_A_GPCNT);
+	audint_count = cx_read(AUD_INT_A_GPCNT);
+	ts1_count = cx_read(ts1->reg_gpcnt);
+	ts2_count = cx_read(ts2->reg_gpcnt);
+	dprintk(7, "pci_status: 0x%08x  pci_mask: 0x%08x\n",
+		pci_status, pci_mask);
+	dprintk(7, "vida_status: 0x%08x vida_mask: 0x%08x count: 0x%x\n",
+		vida_status, vida_mask, vida_count);
+	dprintk(7, "audint_status: 0x%08x audint_mask: 0x%08x count: 0x%x\n",
+		audint_status, audint_mask, audint_count);
+	dprintk(7, "ts1_status: 0x%08x  ts1_mask: 0x%08x count: 0x%x\n",
+		ts1_status, ts1_mask, ts1_count);
+	dprintk(7, "ts2_status: 0x%08x  ts2_mask: 0x%08x count: 0x%x\n",
+		ts2_status, ts2_mask, ts2_count);
+
+	if (pci_status & (PCI_MSK_RISC_RD | PCI_MSK_RISC_WR |
+			  PCI_MSK_AL_RD   | PCI_MSK_AL_WR   | PCI_MSK_APB_DMA |
+			  PCI_MSK_VID_C   | PCI_MSK_VID_B   | PCI_MSK_VID_A   |
+			  PCI_MSK_AUD_INT | PCI_MSK_AUD_EXT |
+			  PCI_MSK_GPIO0   | PCI_MSK_GPIO1   |
+			  PCI_MSK_AV_CORE | PCI_MSK_IR)) {
+
+		if (pci_status & PCI_MSK_RISC_RD)
+			dprintk(7, " (PCI_MSK_RISC_RD   0x%08x)\n",
+				PCI_MSK_RISC_RD);
+
+		if (pci_status & PCI_MSK_RISC_WR)
+			dprintk(7, " (PCI_MSK_RISC_WR   0x%08x)\n",
+				PCI_MSK_RISC_WR);
+
+		if (pci_status & PCI_MSK_AL_RD)
+			dprintk(7, " (PCI_MSK_AL_RD     0x%08x)\n",
+				PCI_MSK_AL_RD);
+
+		if (pci_status & PCI_MSK_AL_WR)
+			dprintk(7, " (PCI_MSK_AL_WR     0x%08x)\n",
+				PCI_MSK_AL_WR);
+
+		if (pci_status & PCI_MSK_APB_DMA)
+			dprintk(7, " (PCI_MSK_APB_DMA   0x%08x)\n",
+				PCI_MSK_APB_DMA);
+
+		if (pci_status & PCI_MSK_VID_C)
+			dprintk(7, " (PCI_MSK_VID_C     0x%08x)\n",
+				PCI_MSK_VID_C);
+
+		if (pci_status & PCI_MSK_VID_B)
+			dprintk(7, " (PCI_MSK_VID_B     0x%08x)\n",
+				PCI_MSK_VID_B);
+
+		if (pci_status & PCI_MSK_VID_A)
+			dprintk(7, " (PCI_MSK_VID_A     0x%08x)\n",
+				PCI_MSK_VID_A);
+
+		if (pci_status & PCI_MSK_AUD_INT)
+			dprintk(7, " (PCI_MSK_AUD_INT   0x%08x)\n",
+				PCI_MSK_AUD_INT);
+
+		if (pci_status & PCI_MSK_AUD_EXT)
+			dprintk(7, " (PCI_MSK_AUD_EXT   0x%08x)\n",
+				PCI_MSK_AUD_EXT);
+
+		if (pci_status & PCI_MSK_GPIO0)
+			dprintk(7, " (PCI_MSK_GPIO0     0x%08x)\n",
+				PCI_MSK_GPIO0);
+
+		if (pci_status & PCI_MSK_GPIO1)
+			dprintk(7, " (PCI_MSK_GPIO1     0x%08x)\n",
+				PCI_MSK_GPIO1);
+
+		if (pci_status & PCI_MSK_AV_CORE)
+			dprintk(7, " (PCI_MSK_AV_CORE   0x%08x)\n",
+				PCI_MSK_AV_CORE);
+
+		if (pci_status & PCI_MSK_IR)
+			dprintk(7, " (PCI_MSK_IR        0x%08x)\n",
+				PCI_MSK_IR);
+	}
+
+	if (cx23885_boards[dev->board].ci_type == 1 &&
+			(pci_status & (PCI_MSK_GPIO1 | PCI_MSK_GPIO0)))
+		handled += netup_ci_slot_status(dev, pci_status);
+
+	if (cx23885_boards[dev->board].ci_type == 2 &&
+			(pci_status & PCI_MSK_GPIO0))
+		handled += altera_ci_irq(dev);
+
+	if (ts1_status) {
+		if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB)
+			handled += cx23885_irq_ts(ts1, ts1_status);
+		else
+		if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER)
+			handled += cx23885_irq_417(dev, ts1_status);
+	}
+
+	if (ts2_status) {
+		if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB)
+			handled += cx23885_irq_ts(ts2, ts2_status);
+		else
+		if (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER)
+			handled += cx23885_irq_417(dev, ts2_status);
+	}
+
+	if (vida_status)
+		handled += cx23885_video_irq(dev, vida_status);
+
+	if (audint_status)
+		handled += cx23885_audio_irq(dev, audint_status, audint_mask);
+
+	if (pci_status & PCI_MSK_IR) {
+		subdev_handled = false;
+		v4l2_subdev_call(dev->sd_ir, core, interrupt_service_routine,
+				 pci_status, &subdev_handled);
+		if (subdev_handled)
+			handled++;
+	}
+
+	if ((pci_status & pci_mask) & PCI_MSK_AV_CORE) {
+		cx23885_irq_disable(dev, PCI_MSK_AV_CORE);
+		if (!schedule_work(&dev->cx25840_work))
+			printk(KERN_ERR "%s: failed to set up deferred work for"
+			       " AV Core/IR interrupt. Interrupt is disabled"
+			       " and won't be re-enabled\n", dev->name);
+		handled++;
+	}
+
+	if (handled)
+		cx_write(PCI_INT_STAT, pci_status);
+out:
+	return IRQ_RETVAL(handled);
+}
+
+static void cx23885_v4l2_dev_notify(struct v4l2_subdev *sd,
+				    unsigned int notification, void *arg)
+{
+	struct cx23885_dev *dev;
+
+	if (sd == NULL)
+		return;
+
+	dev = to_cx23885(sd->v4l2_dev);
+
+	switch (notification) {
+	case V4L2_SUBDEV_IR_RX_NOTIFY: /* Possibly called in an IRQ context */
+		if (sd == dev->sd_ir)
+			cx23885_ir_rx_v4l2_dev_notify(sd, *(u32 *)arg);
+		break;
+	case V4L2_SUBDEV_IR_TX_NOTIFY: /* Possibly called in an IRQ context */
+		if (sd == dev->sd_ir)
+			cx23885_ir_tx_v4l2_dev_notify(sd, *(u32 *)arg);
+		break;
+	}
+}
+
+static void cx23885_v4l2_dev_notify_init(struct cx23885_dev *dev)
+{
+	INIT_WORK(&dev->cx25840_work, cx23885_av_work_handler);
+	INIT_WORK(&dev->ir_rx_work, cx23885_ir_rx_work_handler);
+	INIT_WORK(&dev->ir_tx_work, cx23885_ir_tx_work_handler);
+	dev->v4l2_dev.notify = cx23885_v4l2_dev_notify;
+}
+
+static inline int encoder_on_portb(struct cx23885_dev *dev)
+{
+	return cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER;
+}
+
+static inline int encoder_on_portc(struct cx23885_dev *dev)
+{
+	return cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER;
+}
+
+/* Mask represents 32 different GPIOs, GPIO's are split into multiple
+ * registers depending on the board configuration (and whether the
+ * 417 encoder (wi it's own GPIO's) are present. Each GPIO bit will
+ * be pushed into the correct hardware register, regardless of the
+ * physical location. Certain registers are shared so we sanity check
+ * and report errors if we think we're tampering with a GPIo that might
+ * be assigned to the encoder (and used for the host bus).
+ *
+ * GPIO  2 thru  0 - On the cx23885 bridge
+ * GPIO 18 thru  3 - On the cx23417 host bus interface
+ * GPIO 23 thru 19 - On the cx25840 a/v core
+ */
+void cx23885_gpio_set(struct cx23885_dev *dev, u32 mask)
+{
+	if (mask & 0x7)
+		cx_set(GP0_IO, mask & 0x7);
+
+	if (mask & 0x0007fff8) {
+		if (encoder_on_portb(dev) || encoder_on_portc(dev))
+			printk(KERN_ERR
+				"%s: Setting GPIO on encoder ports\n",
+				dev->name);
+		cx_set(MC417_RWD, (mask & 0x0007fff8) >> 3);
+	}
+
+	/* TODO: 23-19 */
+	if (mask & 0x00f80000)
+		printk(KERN_INFO "%s: Unsupported\n", dev->name);
+}
+
+void cx23885_gpio_clear(struct cx23885_dev *dev, u32 mask)
+{
+	if (mask & 0x00000007)
+		cx_clear(GP0_IO, mask & 0x7);
+
+	if (mask & 0x0007fff8) {
+		if (encoder_on_portb(dev) || encoder_on_portc(dev))
+			printk(KERN_ERR
+				"%s: Clearing GPIO moving on encoder ports\n",
+				dev->name);
+		cx_clear(MC417_RWD, (mask & 0x7fff8) >> 3);
+	}
+
+	/* TODO: 23-19 */
+	if (mask & 0x00f80000)
+		printk(KERN_INFO "%s: Unsupported\n", dev->name);
+}
+
+u32 cx23885_gpio_get(struct cx23885_dev *dev, u32 mask)
+{
+	if (mask & 0x00000007)
+		return (cx_read(GP0_IO) >> 8) & mask & 0x7;
+
+	if (mask & 0x0007fff8) {
+		if (encoder_on_portb(dev) || encoder_on_portc(dev))
+			printk(KERN_ERR
+				"%s: Reading GPIO moving on encoder ports\n",
+				dev->name);
+		return (cx_read(MC417_RWD) & ((mask & 0x7fff8) >> 3)) << 3;
+	}
+
+	/* TODO: 23-19 */
+	if (mask & 0x00f80000)
+		printk(KERN_INFO "%s: Unsupported\n", dev->name);
+
+	return 0;
+}
+
+void cx23885_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput)
+{
+	if ((mask & 0x00000007) && asoutput)
+		cx_set(GP0_IO, (mask & 0x7) << 16);
+	else if ((mask & 0x00000007) && !asoutput)
+		cx_clear(GP0_IO, (mask & 0x7) << 16);
+
+	if (mask & 0x0007fff8) {
+		if (encoder_on_portb(dev) || encoder_on_portc(dev))
+			printk(KERN_ERR
+				"%s: Enabling GPIO on encoder ports\n",
+				dev->name);
+	}
+
+	/* MC417_OEN is active low for output, write 1 for an input */
+	if ((mask & 0x0007fff8) && asoutput)
+		cx_clear(MC417_OEN, (mask & 0x7fff8) >> 3);
+
+	else if ((mask & 0x0007fff8) && !asoutput)
+		cx_set(MC417_OEN, (mask & 0x7fff8) >> 3);
+
+	/* TODO: 23-19 */
+}
+
+static int __devinit cx23885_initdev(struct pci_dev *pci_dev,
+				     const struct pci_device_id *pci_id)
+{
+	struct cx23885_dev *dev;
+	int err;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (NULL == dev)
+		return -ENOMEM;
+
+	err = v4l2_device_register(&pci_dev->dev, &dev->v4l2_dev);
+	if (err < 0)
+		goto fail_free;
+
+	/* Prepare to handle notifications from subdevices */
+	cx23885_v4l2_dev_notify_init(dev);
+
+	/* pci init */
+	dev->pci = pci_dev;
+	if (pci_enable_device(pci_dev)) {
+		err = -EIO;
+		goto fail_unreg;
+	}
+
+	if (cx23885_dev_setup(dev) < 0) {
+		err = -EINVAL;
+		goto fail_unreg;
+	}
+
+	/* print pci info */
+	dev->pci_rev = pci_dev->revision;
+	pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER,  &dev->pci_lat);
+	printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, "
+	       "latency: %d, mmio: 0x%llx\n", dev->name,
+	       pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
+	       dev->pci_lat,
+		(unsigned long long)pci_resource_start(pci_dev, 0));
+
+	pci_set_master(pci_dev);
+	if (!pci_dma_supported(pci_dev, 0xffffffff)) {
+		printk("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name);
+		err = -EIO;
+		goto fail_irq;
+	}
+
+	err = request_irq(pci_dev->irq, cx23885_irq,
+			  IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
+	if (err < 0) {
+		printk(KERN_ERR "%s: can't get IRQ %d\n",
+		       dev->name, pci_dev->irq);
+		goto fail_irq;
+	}
+
+	switch (dev->board) {
+	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+		cx23885_irq_add_enable(dev, PCI_MSK_GPIO1 | PCI_MSK_GPIO0);
+		break;
+	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
+		cx23885_irq_add_enable(dev, PCI_MSK_GPIO0);
+		break;
+	}
+
+	/*
+	 * The CX2388[58] IR controller can start firing interrupts when
+	 * enabled, so these have to take place after the cx23885_irq() handler
+	 * is hooked up by the call to request_irq() above.
+	 */
+	cx23885_ir_pci_int_enable(dev);
+	cx23885_input_init(dev);
+
+	return 0;
+
+fail_irq:
+	cx23885_dev_unregister(dev);
+fail_unreg:
+	v4l2_device_unregister(&dev->v4l2_dev);
+fail_free:
+	kfree(dev);
+	return err;
+}
+
+static void __devexit cx23885_finidev(struct pci_dev *pci_dev)
+{
+	struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev);
+	struct cx23885_dev *dev = to_cx23885(v4l2_dev);
+
+	cx23885_input_fini(dev);
+	cx23885_ir_fini(dev);
+
+	cx23885_shutdown(dev);
+
+	pci_disable_device(pci_dev);
+
+	/* unregister stuff */
+	free_irq(pci_dev->irq, dev);
+
+	cx23885_dev_unregister(dev);
+	v4l2_device_unregister(v4l2_dev);
+	kfree(dev);
+}
+
+static struct pci_device_id cx23885_pci_tbl[] = {
+	{
+		/* CX23885 */
+		.vendor       = 0x14f1,
+		.device       = 0x8852,
+		.subvendor    = PCI_ANY_ID,
+		.subdevice    = PCI_ANY_ID,
+	}, {
+		/* CX23887 Rev 2 */
+		.vendor       = 0x14f1,
+		.device       = 0x8880,
+		.subvendor    = PCI_ANY_ID,
+		.subdevice    = PCI_ANY_ID,
+	}, {
+		/* --- end of list --- */
+	}
+};
+MODULE_DEVICE_TABLE(pci, cx23885_pci_tbl);
+
+static struct pci_driver cx23885_pci_driver = {
+	.name     = "cx23885",
+	.id_table = cx23885_pci_tbl,
+	.probe    = cx23885_initdev,
+	.remove   = __devexit_p(cx23885_finidev),
+	/* TODO */
+	.suspend  = NULL,
+	.resume   = NULL,
+};
+
+static int __init cx23885_init(void)
+{
+	printk(KERN_INFO "cx23885 driver version %s loaded\n",
+		CX23885_VERSION);
+	return pci_register_driver(&cx23885_pci_driver);
+}
+
+static void __exit cx23885_fini(void)
+{
+	pci_unregister_driver(&cx23885_pci_driver);
+}
+
+module_init(cx23885_init);
+module_exit(cx23885_fini);
diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c
new file mode 100644
index 0000000..4379d8a
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-dvb.c
@@ -0,0 +1,1412 @@
+/*
+ *  Driver for the Conexant CX23885 PCIe bridge
+ *
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/kthread.h>
+#include <linux/file.h>
+#include <linux/suspend.h>
+
+#include "cx23885.h"
+#include <media/v4l2-common.h>
+
+#include "dvb_ca_en50221.h"
+#include "s5h1409.h"
+#include "s5h1411.h"
+#include "mt2131.h"
+#include "tda8290.h"
+#include "tda18271.h"
+#include "lgdt330x.h"
+#include "xc4000.h"
+#include "xc5000.h"
+#include "max2165.h"
+#include "tda10048.h"
+#include "tuner-xc2028.h"
+#include "tuner-simple.h"
+#include "dib7000p.h"
+#include "dibx000_common.h"
+#include "zl10353.h"
+#include "stv0900.h"
+#include "stv0900_reg.h"
+#include "stv6110.h"
+#include "lnbh24.h"
+#include "cx24116.h"
+#include "cimax2.h"
+#include "lgs8gxx.h"
+#include "netup-eeprom.h"
+#include "netup-init.h"
+#include "lgdt3305.h"
+#include "atbm8830.h"
+#include "ds3000.h"
+#include "cx23885-f300.h"
+#include "altera-ci.h"
+#include "stv0367.h"
+#include "drxk.h"
+#include "mt2063.h"
+#include "stv090x.h"
+#include "stb6100.h"
+#include "stb6100_cfg.h"
+
+static unsigned int debug;
+
+#define dprintk(level, fmt, arg...)\
+	do { if (debug >= level)\
+		printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\
+	} while (0)
+
+/* ------------------------------------------------------------------ */
+
+static unsigned int alt_tuner;
+module_param(alt_tuner, int, 0644);
+MODULE_PARM_DESC(alt_tuner, "Enable alternate tuner configuration");
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+/* ------------------------------------------------------------------ */
+
+static int dvb_buf_setup(struct videobuf_queue *q,
+			 unsigned int *count, unsigned int *size)
+{
+	struct cx23885_tsport *port = q->priv_data;
+
+	port->ts_packet_size  = 188 * 4;
+	port->ts_packet_count = 32;
+
+	*size  = port->ts_packet_size * port->ts_packet_count;
+	*count = 32;
+	return 0;
+}
+
+static int dvb_buf_prepare(struct videobuf_queue *q,
+			   struct videobuf_buffer *vb, enum v4l2_field field)
+{
+	struct cx23885_tsport *port = q->priv_data;
+	return cx23885_buf_prepare(q, port, (struct cx23885_buffer *)vb, field);
+}
+
+static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+	struct cx23885_tsport *port = q->priv_data;
+	cx23885_buf_queue(port, (struct cx23885_buffer *)vb);
+}
+
+static void dvb_buf_release(struct videobuf_queue *q,
+			    struct videobuf_buffer *vb)
+{
+	cx23885_free_buffer(q, (struct cx23885_buffer *)vb);
+}
+
+static int cx23885_dvb_set_frontend(struct dvb_frontend *fe);
+
+static void cx23885_dvb_gate_ctrl(struct cx23885_tsport  *port, int open)
+{
+	struct videobuf_dvb_frontends *f;
+	struct videobuf_dvb_frontend *fe;
+
+	f = &port->frontends;
+
+	if (f->gate <= 1) /* undefined or fe0 */
+		fe = videobuf_dvb_get_frontend(f, 1);
+	else
+		fe = videobuf_dvb_get_frontend(f, f->gate);
+
+	if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl)
+		fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, open);
+
+	/*
+	 * FIXME: Improve this path to avoid calling the
+	 * cx23885_dvb_set_frontend() every time it passes here.
+	 */
+	cx23885_dvb_set_frontend(fe->dvb.frontend);
+}
+
+static struct videobuf_queue_ops dvb_qops = {
+	.buf_setup    = dvb_buf_setup,
+	.buf_prepare  = dvb_buf_prepare,
+	.buf_queue    = dvb_buf_queue,
+	.buf_release  = dvb_buf_release,
+};
+
+static struct s5h1409_config hauppauge_generic_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_SERIAL_OUTPUT,
+	.gpio          = S5H1409_GPIO_ON,
+	.qam_if        = 44000,
+	.inversion     = S5H1409_INVERSION_OFF,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
+static struct tda10048_config hauppauge_hvr1200_config = {
+	.demod_address    = 0x10 >> 1,
+	.output_mode      = TDA10048_SERIAL_OUTPUT,
+	.fwbulkwritelen   = TDA10048_BULKWRITE_200,
+	.inversion        = TDA10048_INVERSION_ON,
+	.dtv6_if_freq_khz = TDA10048_IF_3300,
+	.dtv7_if_freq_khz = TDA10048_IF_3800,
+	.dtv8_if_freq_khz = TDA10048_IF_4300,
+	.clk_freq_khz     = TDA10048_CLK_16000,
+};
+
+static struct tda10048_config hauppauge_hvr1210_config = {
+	.demod_address    = 0x10 >> 1,
+	.output_mode      = TDA10048_SERIAL_OUTPUT,
+	.fwbulkwritelen   = TDA10048_BULKWRITE_200,
+	.inversion        = TDA10048_INVERSION_ON,
+	.dtv6_if_freq_khz = TDA10048_IF_3300,
+	.dtv7_if_freq_khz = TDA10048_IF_3500,
+	.dtv8_if_freq_khz = TDA10048_IF_4000,
+	.clk_freq_khz     = TDA10048_CLK_16000,
+};
+
+static struct s5h1409_config hauppauge_ezqam_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_SERIAL_OUTPUT,
+	.gpio          = S5H1409_GPIO_OFF,
+	.qam_if        = 4000,
+	.inversion     = S5H1409_INVERSION_ON,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
+static struct s5h1409_config hauppauge_hvr1800lp_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_SERIAL_OUTPUT,
+	.gpio          = S5H1409_GPIO_OFF,
+	.qam_if        = 44000,
+	.inversion     = S5H1409_INVERSION_OFF,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
+static struct s5h1409_config hauppauge_hvr1500_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_SERIAL_OUTPUT,
+	.gpio          = S5H1409_GPIO_OFF,
+	.inversion     = S5H1409_INVERSION_OFF,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
+static struct mt2131_config hauppauge_generic_tunerconfig = {
+	0x61
+};
+
+static struct lgdt330x_config fusionhdtv_5_express = {
+	.demod_address = 0x0e,
+	.demod_chip = LGDT3303,
+	.serial_mpeg = 0x40,
+};
+
+static struct s5h1409_config hauppauge_hvr1500q_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_SERIAL_OUTPUT,
+	.gpio          = S5H1409_GPIO_ON,
+	.qam_if        = 44000,
+	.inversion     = S5H1409_INVERSION_OFF,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
+static struct s5h1409_config dvico_s5h1409_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_SERIAL_OUTPUT,
+	.gpio          = S5H1409_GPIO_ON,
+	.qam_if        = 44000,
+	.inversion     = S5H1409_INVERSION_OFF,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
+static struct s5h1411_config dvico_s5h1411_config = {
+	.output_mode   = S5H1411_SERIAL_OUTPUT,
+	.gpio          = S5H1411_GPIO_ON,
+	.qam_if        = S5H1411_IF_44000,
+	.vsb_if        = S5H1411_IF_44000,
+	.inversion     = S5H1411_INVERSION_OFF,
+	.status_mode   = S5H1411_DEMODLOCKING,
+	.mpeg_timing   = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
+static struct s5h1411_config hcw_s5h1411_config = {
+	.output_mode   = S5H1411_SERIAL_OUTPUT,
+	.gpio          = S5H1411_GPIO_OFF,
+	.vsb_if        = S5H1411_IF_44000,
+	.qam_if        = S5H1411_IF_4000,
+	.inversion     = S5H1411_INVERSION_ON,
+	.status_mode   = S5H1411_DEMODLOCKING,
+	.mpeg_timing   = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
+static struct xc5000_config hauppauge_hvr1500q_tunerconfig = {
+	.i2c_address      = 0x61,
+	.if_khz           = 5380,
+};
+
+static struct xc5000_config dvico_xc5000_tunerconfig = {
+	.i2c_address      = 0x64,
+	.if_khz           = 5380,
+};
+
+static struct tda829x_config tda829x_no_probe = {
+	.probe_tuner = TDA829X_DONT_PROBE,
+};
+
+static struct tda18271_std_map hauppauge_tda18271_std_map = {
+	.atsc_6   = { .if_freq = 5380, .agc_mode = 3, .std = 3,
+		      .if_lvl = 6, .rfagc_top = 0x37 },
+	.qam_6    = { .if_freq = 4000, .agc_mode = 3, .std = 0,
+		      .if_lvl = 6, .rfagc_top = 0x37 },
+};
+
+static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = {
+	.dvbt_6   = { .if_freq = 3300, .agc_mode = 3, .std = 4,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+	.dvbt_7   = { .if_freq = 3800, .agc_mode = 3, .std = 5,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+	.dvbt_8   = { .if_freq = 4300, .agc_mode = 3, .std = 6,
+		      .if_lvl = 1, .rfagc_top = 0x37, },
+};
+
+static struct tda18271_config hauppauge_tda18271_config = {
+	.std_map = &hauppauge_tda18271_std_map,
+	.gate    = TDA18271_GATE_ANALOG,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+static struct tda18271_config hauppauge_hvr1200_tuner_config = {
+	.std_map = &hauppauge_hvr1200_tda18271_std_map,
+	.gate    = TDA18271_GATE_ANALOG,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+static struct tda18271_config hauppauge_hvr1210_tuner_config = {
+	.gate    = TDA18271_GATE_DIGITAL,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+static struct tda18271_std_map hauppauge_hvr127x_std_map = {
+	.atsc_6   = { .if_freq = 3250, .agc_mode = 3, .std = 4,
+		      .if_lvl = 1, .rfagc_top = 0x58 },
+	.qam_6    = { .if_freq = 4000, .agc_mode = 3, .std = 5,
+		      .if_lvl = 1, .rfagc_top = 0x58 },
+};
+
+static struct tda18271_config hauppauge_hvr127x_config = {
+	.std_map = &hauppauge_hvr127x_std_map,
+	.output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+static struct lgdt3305_config hauppauge_lgdt3305_config = {
+	.i2c_addr           = 0x0e,
+	.mpeg_mode          = LGDT3305_MPEG_SERIAL,
+	.tpclk_edge         = LGDT3305_TPCLK_FALLING_EDGE,
+	.tpvalid_polarity   = LGDT3305_TP_VALID_HIGH,
+	.deny_i2c_rptr      = 1,
+	.spectral_inversion = 1,
+	.qam_if_khz         = 4000,
+	.vsb_if_khz         = 3250,
+};
+
+static struct dibx000_agc_config xc3028_agc_config = {
+	BAND_VHF | BAND_UHF,	/* band_caps */
+
+	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
+	 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0,
+	 * P_agc_nb_est=2, P_agc_write=0
+	 */
+	(0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
+		(3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */
+
+	712,	/* inv_gain */
+	21,	/* time_stabiliz */
+
+	0,	/* alpha_level */
+	118,	/* thlock */
+
+	0,	/* wbd_inv */
+	2867,	/* wbd_ref */
+	0,	/* wbd_sel */
+	2,	/* wbd_alpha */
+
+	0,	/* agc1_max */
+	0,	/* agc1_min */
+	39718,	/* agc2_max */
+	9930,	/* agc2_min */
+	0,	/* agc1_pt1 */
+	0,	/* agc1_pt2 */
+	0,	/* agc1_pt3 */
+	0,	/* agc1_slope1 */
+	0,	/* agc1_slope2 */
+	0,	/* agc2_pt1 */
+	128,	/* agc2_pt2 */
+	29,	/* agc2_slope1 */
+	29,	/* agc2_slope2 */
+
+	17,	/* alpha_mant */
+	27,	/* alpha_exp */
+	23,	/* beta_mant */
+	51,	/* beta_exp */
+
+	1,	/* perform_agc_softsplit */
+};
+
+/* PLL Configuration for COFDM BW_MHz = 8.000000
+ * With external clock = 30.000000 */
+static struct dibx000_bandwidth_config xc3028_bw_config = {
+	60000,	/* internal */
+	30000,	/* sampling */
+	1,	/* pll_cfg: prediv */
+	8,	/* pll_cfg: ratio */
+	3,	/* pll_cfg: range */
+	1,	/* pll_cfg: reset */
+	0,	/* pll_cfg: bypass */
+	0,	/* misc: refdiv */
+	0,	/* misc: bypclk_div */
+	1,	/* misc: IO_CLK_en_core */
+	1,	/* misc: ADClkSrc */
+	0,	/* misc: modulo */
+	(3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
+	(1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
+	20452225, /* timf */
+	30000000  /* xtal_hz */
+};
+
+static struct dib7000p_config hauppauge_hvr1400_dib7000_config = {
+	.output_mpeg2_in_188_bytes = 1,
+	.hostbus_diversity = 1,
+	.tuner_is_baseband = 0,
+	.update_lna  = NULL,
+
+	.agc_config_count = 1,
+	.agc = &xc3028_agc_config,
+	.bw  = &xc3028_bw_config,
+
+	.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+	.pwm_freq_div = 0,
+	.agc_control  = NULL,
+	.spur_protect = 0,
+
+	.output_mode = OUTMODE_MPEG2_SERIAL,
+};
+
+static struct zl10353_config dvico_fusionhdtv_xc3028 = {
+	.demod_address = 0x0f,
+	.if2           = 45600,
+	.no_tuner      = 1,
+	.disable_i2c_gate_ctrl = 1,
+};
+
+static struct stv0900_reg stv0900_ts_regs[] = {
+	{ R0900_TSGENERAL, 0x00 },
+	{ R0900_P1_TSSPEED, 0x40 },
+	{ R0900_P2_TSSPEED, 0x40 },
+	{ R0900_P1_TSCFGM, 0xc0 },
+	{ R0900_P2_TSCFGM, 0xc0 },
+	{ R0900_P1_TSCFGH, 0xe0 },
+	{ R0900_P2_TSCFGH, 0xe0 },
+	{ R0900_P1_TSCFGL, 0x20 },
+	{ R0900_P2_TSCFGL, 0x20 },
+	{ 0xffff, 0xff }, /* terminate */
+};
+
+static struct stv0900_config netup_stv0900_config = {
+	.demod_address = 0x68,
+	.demod_mode = 1, /* dual */
+	.xtal = 8000000,
+	.clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
+	.diseqc_mode = 2,/* 2/3 PWM */
+	.ts_config_regs = stv0900_ts_regs,
+	.tun1_maddress = 0,/* 0x60 */
+	.tun2_maddress = 3,/* 0x63 */
+	.tun1_adc = 1,/* 1 Vpp */
+	.tun2_adc = 1,/* 1 Vpp */
+};
+
+static struct stv6110_config netup_stv6110_tunerconfig_a = {
+	.i2c_address = 0x60,
+	.mclk = 16000000,
+	.clk_div = 1,
+	.gain = 8, /* +16 dB  - maximum gain */
+};
+
+static struct stv6110_config netup_stv6110_tunerconfig_b = {
+	.i2c_address = 0x63,
+	.mclk = 16000000,
+	.clk_div = 1,
+	.gain = 8, /* +16 dB  - maximum gain */
+};
+
+static struct cx24116_config tbs_cx24116_config = {
+	.demod_address = 0x55,
+};
+
+static struct ds3000_config tevii_ds3000_config = {
+	.demod_address = 0x68,
+};
+
+static struct cx24116_config dvbworld_cx24116_config = {
+	.demod_address = 0x05,
+};
+
+static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = {
+	.prod = LGS8GXX_PROD_LGS8GL5,
+	.demod_address = 0x19,
+	.serial_ts = 0,
+	.ts_clk_pol = 1,
+	.ts_clk_gated = 1,
+	.if_clk_freq = 30400, /* 30.4 MHz */
+	.if_freq = 5380, /* 5.38 MHz */
+	.if_neg_center = 1,
+	.ext_adc = 0,
+	.adc_signed = 0,
+	.if_neg_edge = 0,
+};
+
+static struct xc5000_config mygica_x8506_xc5000_config = {
+	.i2c_address = 0x61,
+	.if_khz = 5380,
+};
+
+static struct stv090x_config prof_8000_stv090x_config = {
+        .device                 = STV0903,
+        .demod_mode             = STV090x_SINGLE,
+        .clk_mode               = STV090x_CLK_EXT,
+        .xtal                   = 27000000,
+        .address                = 0x6A,
+        .ts1_mode               = STV090x_TSMODE_PARALLEL_PUNCTURED,
+        .repeater_level         = STV090x_RPTLEVEL_64,
+        .adc1_range             = STV090x_ADC_2Vpp,
+        .diseqc_envelope_mode   = false,
+
+        .tuner_get_frequency    = stb6100_get_frequency,
+        .tuner_set_frequency    = stb6100_set_frequency,
+        .tuner_set_bandwidth    = stb6100_set_bandwidth,
+        .tuner_get_bandwidth    = stb6100_get_bandwidth,
+};
+
+static struct stb6100_config prof_8000_stb6100_config = {
+	.tuner_address = 0x60,
+	.refclock = 27000000,
+};
+
+static int p8000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+	struct cx23885_tsport *port = fe->dvb->priv;
+	struct cx23885_dev *dev = port->dev;
+
+	if (voltage == SEC_VOLTAGE_18)
+		cx_write(MC417_RWD, 0x00001e00);
+	else if (voltage == SEC_VOLTAGE_13)
+		cx_write(MC417_RWD, 0x00001a00);
+	else
+		cx_write(MC417_RWD, 0x00001800);
+	return 0;
+}
+
+static int cx23885_dvb_set_frontend(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	struct cx23885_tsport *port = fe->dvb->priv;
+	struct cx23885_dev *dev = port->dev;
+
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+		switch (p->modulation) {
+		case VSB_8:
+			cx23885_gpio_clear(dev, GPIO_5);
+			break;
+		case QAM_64:
+		case QAM_256:
+		default:
+			cx23885_gpio_set(dev, GPIO_5);
+			break;
+		}
+		break;
+	case CX23885_BOARD_MYGICA_X8506:
+	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+		/* Select Digital TV */
+		cx23885_gpio_set(dev, GPIO_0);
+		break;
+	}
+	return 0;
+}
+
+static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = {
+	.prod = LGS8GXX_PROD_LGS8G75,
+	.demod_address = 0x19,
+	.serial_ts = 0,
+	.ts_clk_pol = 1,
+	.ts_clk_gated = 1,
+	.if_clk_freq = 30400, /* 30.4 MHz */
+	.if_freq = 6500, /* 6.50 MHz */
+	.if_neg_center = 1,
+	.ext_adc = 0,
+	.adc_signed = 1,
+	.adc_vpp = 2, /* 1.6 Vpp */
+	.if_neg_edge = 1,
+};
+
+static struct xc5000_config magicpro_prohdtve2_xc5000_config = {
+	.i2c_address = 0x61,
+	.if_khz = 6500,
+};
+
+static struct atbm8830_config mygica_x8558pro_atbm8830_cfg1 = {
+	.prod = ATBM8830_PROD_8830,
+	.demod_address = 0x44,
+	.serial_ts = 0,
+	.ts_sampling_edge = 1,
+	.ts_clk_gated = 0,
+	.osc_clk_freq = 30400, /* in kHz */
+	.if_freq = 0, /* zero IF */
+	.zif_swap_iq = 1,
+	.agc_min = 0x2E,
+	.agc_max = 0xFF,
+	.agc_hold_loop = 0,
+};
+
+static struct max2165_config mygic_x8558pro_max2165_cfg1 = {
+	.i2c_address = 0x60,
+	.osc_clk = 20
+};
+
+static struct atbm8830_config mygica_x8558pro_atbm8830_cfg2 = {
+	.prod = ATBM8830_PROD_8830,
+	.demod_address = 0x44,
+	.serial_ts = 1,
+	.ts_sampling_edge = 1,
+	.ts_clk_gated = 0,
+	.osc_clk_freq = 30400, /* in kHz */
+	.if_freq = 0, /* zero IF */
+	.zif_swap_iq = 1,
+	.agc_min = 0x2E,
+	.agc_max = 0xFF,
+	.agc_hold_loop = 0,
+};
+
+static struct max2165_config mygic_x8558pro_max2165_cfg2 = {
+	.i2c_address = 0x60,
+	.osc_clk = 20
+};
+static struct stv0367_config netup_stv0367_config[] = {
+	{
+		.demod_address = 0x1c,
+		.xtal = 27000000,
+		.if_khz = 4500,
+		.if_iq_mode = 0,
+		.ts_mode = 1,
+		.clk_pol = 0,
+	}, {
+		.demod_address = 0x1d,
+		.xtal = 27000000,
+		.if_khz = 4500,
+		.if_iq_mode = 0,
+		.ts_mode = 1,
+		.clk_pol = 0,
+	},
+};
+
+static struct xc5000_config netup_xc5000_config[] = {
+	{
+		.i2c_address = 0x61,
+		.if_khz = 4500,
+	}, {
+		.i2c_address = 0x64,
+		.if_khz = 4500,
+	},
+};
+
+static struct drxk_config terratec_drxk_config[] = {
+	{
+		.adr = 0x29,
+		.no_i2c_bridge = 1,
+	}, {
+		.adr = 0x2a,
+		.no_i2c_bridge = 1,
+	},
+};
+
+static struct mt2063_config terratec_mt2063_config[] = {
+	{
+		.tuner_address = 0x60,
+	}, {
+		.tuner_address = 0x67,
+	},
+};
+
+int netup_altera_fpga_rw(void *device, int flag, int data, int read)
+{
+	struct cx23885_dev *dev = (struct cx23885_dev *)device;
+	unsigned long timeout = jiffies + msecs_to_jiffies(1);
+	uint32_t mem = 0;
+
+	mem = cx_read(MC417_RWD);
+	if (read)
+		cx_set(MC417_OEN, ALT_DATA);
+	else {
+		cx_clear(MC417_OEN, ALT_DATA);/* D0-D7 out */
+		mem &= ~ALT_DATA;
+		mem |= (data & ALT_DATA);
+	}
+
+	if (flag)
+		mem |= ALT_AD_RG;
+	else
+		mem &= ~ALT_AD_RG;
+
+	mem &= ~ALT_CS;
+	if (read)
+		mem = (mem & ~ALT_RD) | ALT_WR;
+	else
+		mem = (mem & ~ALT_WR) | ALT_RD;
+
+	cx_write(MC417_RWD, mem);  /* start RW cycle */
+
+	for (;;) {
+		mem = cx_read(MC417_RWD);
+		if ((mem & ALT_RDY) == 0)
+			break;
+		if (time_after(jiffies, timeout))
+			break;
+		udelay(1);
+	}
+
+	cx_set(MC417_RWD, ALT_RD | ALT_WR | ALT_CS);
+	if (read)
+		return mem & ALT_DATA;
+
+	return 0;
+};
+
+static int dvb_register(struct cx23885_tsport *port)
+{
+	struct cx23885_dev *dev = port->dev;
+	struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL;
+	struct videobuf_dvb_frontend *fe0, *fe1 = NULL;
+	int mfe_shared = 0; /* bus not shared by default */
+	int ret;
+
+	/* Get the first frontend */
+	fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
+	if (!fe0)
+		return -EINVAL;
+
+	/* init struct videobuf_dvb */
+	fe0->dvb.name = dev->name;
+
+	/* multi-frontend gate control is undefined or defaults to fe0 */
+	port->frontends.gate = 0;
+
+	/* Sets the gate control callback to be used by i2c command calls */
+	port->gate_ctrl = cx23885_dvb_gate_ctrl;
+
+	/* init frontend */
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
+						&hauppauge_generic_config,
+						&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(mt2131_attach, fe0->dvb.frontend,
+				   &i2c_bus->i2c_adap,
+				   &hauppauge_generic_tunerconfig, 0);
+		}
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1275:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
+					       &hauppauge_lgdt3305_config,
+					       &i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
+				   0x60, &dev->i2c_bus[1].i2c_adap,
+				   &hauppauge_hvr127x_config);
+		}
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+					       &hcw_s5h1411_config,
+					       &i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
+				   0x60, &dev->i2c_bus[1].i2c_adap,
+				   &hauppauge_tda18271_config);
+		}
+
+		tda18271_attach(&dev->ts1.analog_fe,
+			0x60, &dev->i2c_bus[1].i2c_adap,
+			&hauppauge_tda18271_config);
+
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1800:
+		i2c_bus = &dev->i2c_bus[0];
+		switch (alt_tuner) {
+		case 1:
+			fe0->dvb.frontend =
+				dvb_attach(s5h1409_attach,
+					   &hauppauge_ezqam_config,
+					   &i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend != NULL) {
+				dvb_attach(tda829x_attach, fe0->dvb.frontend,
+					   &dev->i2c_bus[1].i2c_adap, 0x42,
+					   &tda829x_no_probe);
+				dvb_attach(tda18271_attach, fe0->dvb.frontend,
+					   0x60, &dev->i2c_bus[1].i2c_adap,
+					   &hauppauge_tda18271_config);
+			}
+			break;
+		case 0:
+		default:
+			fe0->dvb.frontend =
+				dvb_attach(s5h1409_attach,
+					   &hauppauge_generic_config,
+					   &i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend != NULL)
+				dvb_attach(mt2131_attach, fe0->dvb.frontend,
+					   &i2c_bus->i2c_adap,
+					   &hauppauge_generic_tunerconfig, 0);
+			break;
+		}
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
+						&hauppauge_hvr1800lp_config,
+						&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(mt2131_attach, fe0->dvb.frontend,
+				   &i2c_bus->i2c_adap,
+				   &hauppauge_generic_tunerconfig, 0);
+		}
+		break;
+	case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
+						&fusionhdtv_5_express,
+						&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+				   &i2c_bus->i2c_adap, 0x61,
+				   TUNER_LG_TDVS_H06XF);
+		}
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+		i2c_bus = &dev->i2c_bus[1];
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
+						&hauppauge_hvr1500q_config,
+						&dev->i2c_bus[0].i2c_adap);
+		if (fe0->dvb.frontend != NULL)
+			dvb_attach(xc5000_attach, fe0->dvb.frontend,
+				   &i2c_bus->i2c_adap,
+				   &hauppauge_hvr1500q_tunerconfig);
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1500:
+		i2c_bus = &dev->i2c_bus[1];
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
+						&hauppauge_hvr1500_config,
+						&dev->i2c_bus[0].i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			struct dvb_frontend *fe;
+			struct xc2028_config cfg = {
+				.i2c_adap  = &i2c_bus->i2c_adap,
+				.i2c_addr  = 0x61,
+			};
+			static struct xc2028_ctrl ctl = {
+				.fname       = XC2028_DEFAULT_FIRMWARE,
+				.max_len     = 64,
+				.demod       = XC3028_FE_OREN538,
+			};
+
+			fe = dvb_attach(xc2028_attach,
+					fe0->dvb.frontend, &cfg);
+			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+				fe->ops.tuner_ops.set_config(fe, &ctl);
+		}
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1200:
+	case CX23885_BOARD_HAUPPAUGE_HVR1700:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(tda10048_attach,
+			&hauppauge_hvr1200_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(tda829x_attach, fe0->dvb.frontend,
+				&dev->i2c_bus[1].i2c_adap, 0x42,
+				&tda829x_no_probe);
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
+				0x60, &dev->i2c_bus[1].i2c_adap,
+				&hauppauge_hvr1200_tuner_config);
+		}
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1210:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(tda10048_attach,
+			&hauppauge_hvr1210_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
+				0x60, &dev->i2c_bus[1].i2c_adap,
+				&hauppauge_hvr1210_tuner_config);
+		}
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1400:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(dib7000p_attach,
+			&i2c_bus->i2c_adap,
+			0x12, &hauppauge_hvr1400_dib7000_config);
+		if (fe0->dvb.frontend != NULL) {
+			struct dvb_frontend *fe;
+			struct xc2028_config cfg = {
+				.i2c_adap  = &dev->i2c_bus[1].i2c_adap,
+				.i2c_addr  = 0x64,
+			};
+			static struct xc2028_ctrl ctl = {
+				.fname   = XC3028L_DEFAULT_FIRMWARE,
+				.max_len = 64,
+				.demod   = XC3028_FE_DIBCOM52,
+				/* This is true for all demods with
+					v36 firmware? */
+				.type    = XC2028_D2633,
+			};
+
+			fe = dvb_attach(xc2028_attach,
+					fe0->dvb.frontend, &cfg);
+			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+				fe->ops.tuner_ops.set_config(fe, &ctl);
+		}
+		break;
+	case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
+		i2c_bus = &dev->i2c_bus[port->nr - 1];
+
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
+						&dvico_s5h1409_config,
+						&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend == NULL)
+			fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+							&dvico_s5h1411_config,
+							&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL)
+			dvb_attach(xc5000_attach, fe0->dvb.frontend,
+				   &i2c_bus->i2c_adap,
+				   &dvico_xc5000_tunerconfig);
+		break;
+	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: {
+		i2c_bus = &dev->i2c_bus[port->nr - 1];
+
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &dvico_fusionhdtv_xc3028,
+					       &i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			struct dvb_frontend      *fe;
+			struct xc2028_config	  cfg = {
+				.i2c_adap  = &i2c_bus->i2c_adap,
+				.i2c_addr  = 0x61,
+			};
+			static struct xc2028_ctrl ctl = {
+				.fname       = XC2028_DEFAULT_FIRMWARE,
+				.max_len     = 64,
+				.demod       = XC3028_FE_ZARLINK456,
+			};
+
+			fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
+					&cfg);
+			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+				fe->ops.tuner_ops.set_config(fe, &ctl);
+		}
+		break;
+	}
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
+	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+		i2c_bus = &dev->i2c_bus[0];
+
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+			&dvico_fusionhdtv_xc3028,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			struct dvb_frontend      *fe;
+			struct xc2028_config	  cfg = {
+				.i2c_adap  = &dev->i2c_bus[1].i2c_adap,
+				.i2c_addr  = 0x61,
+			};
+			static struct xc2028_ctrl ctl = {
+				.fname       = XC2028_DEFAULT_FIRMWARE,
+				.max_len     = 64,
+				.demod       = XC3028_FE_ZARLINK456,
+			};
+
+			fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
+				&cfg);
+			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+				fe->ops.tuner_ops.set_config(fe, &ctl);
+		}
+		break;
+	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000:
+		i2c_bus = &dev->i2c_bus[0];
+
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &dvico_fusionhdtv_xc3028,
+					       &i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			struct dvb_frontend	*fe;
+			struct xc4000_config	cfg = {
+				.i2c_address	  = 0x61,
+				.default_pm	  = 0,
+				.dvb_amplitude	  = 134,
+				.set_smoothedcvbs = 1,
+				.if_khz		  = 4560
+			};
+
+			fe = dvb_attach(xc4000_attach, fe0->dvb.frontend,
+					&dev->i2c_bus[1].i2c_adap, &cfg);
+			if (!fe) {
+				printk(KERN_ERR "%s/2: xc4000 attach failed\n",
+				       dev->name);
+				goto frontend_detach;
+			}
+		}
+		break;
+	case CX23885_BOARD_TBS_6920:
+		i2c_bus = &dev->i2c_bus[1];
+
+		fe0->dvb.frontend = dvb_attach(cx24116_attach,
+					&tbs_cx24116_config,
+					&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL)
+			fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
+
+		break;
+	case CX23885_BOARD_TEVII_S470:
+		i2c_bus = &dev->i2c_bus[1];
+
+		fe0->dvb.frontend = dvb_attach(ds3000_attach,
+					&tevii_ds3000_config,
+					&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL)
+			fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
+
+		break;
+	case CX23885_BOARD_DVBWORLD_2005:
+		i2c_bus = &dev->i2c_bus[1];
+
+		fe0->dvb.frontend = dvb_attach(cx24116_attach,
+			&dvbworld_cx24116_config,
+			&i2c_bus->i2c_adap);
+		break;
+	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+		i2c_bus = &dev->i2c_bus[0];
+		switch (port->nr) {
+		/* port B */
+		case 1:
+			fe0->dvb.frontend = dvb_attach(stv0900_attach,
+							&netup_stv0900_config,
+							&i2c_bus->i2c_adap, 0);
+			if (fe0->dvb.frontend != NULL) {
+				if (dvb_attach(stv6110_attach,
+						fe0->dvb.frontend,
+						&netup_stv6110_tunerconfig_a,
+						&i2c_bus->i2c_adap)) {
+					if (!dvb_attach(lnbh24_attach,
+							fe0->dvb.frontend,
+							&i2c_bus->i2c_adap,
+							LNBH24_PCL | LNBH24_TTX,
+							LNBH24_TEN, 0x09))
+						printk(KERN_ERR
+							"No LNBH24 found!\n");
+
+				}
+			}
+			break;
+		/* port C */
+		case 2:
+			fe0->dvb.frontend = dvb_attach(stv0900_attach,
+							&netup_stv0900_config,
+							&i2c_bus->i2c_adap, 1);
+			if (fe0->dvb.frontend != NULL) {
+				if (dvb_attach(stv6110_attach,
+						fe0->dvb.frontend,
+						&netup_stv6110_tunerconfig_b,
+						&i2c_bus->i2c_adap)) {
+					if (!dvb_attach(lnbh24_attach,
+							fe0->dvb.frontend,
+							&i2c_bus->i2c_adap,
+							LNBH24_PCL | LNBH24_TTX,
+							LNBH24_TEN, 0x0a))
+						printk(KERN_ERR
+							"No LNBH24 found!\n");
+
+				}
+			}
+			break;
+		}
+		break;
+	case CX23885_BOARD_MYGICA_X8506:
+		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus2 = &dev->i2c_bus[1];
+		fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
+			&mygica_x8506_lgs8gl5_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(xc5000_attach,
+				fe0->dvb.frontend,
+				&i2c_bus2->i2c_adap,
+				&mygica_x8506_xc5000_config);
+		}
+		break;
+	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus2 = &dev->i2c_bus[1];
+		fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
+			&magicpro_prohdtve2_lgs8g75_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(xc5000_attach,
+				fe0->dvb.frontend,
+				&i2c_bus2->i2c_adap,
+				&magicpro_prohdtve2_xc5000_config);
+		}
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+			&hcw_s5h1411_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL)
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
+				0x60, &dev->i2c_bus[0].i2c_adap,
+				&hauppauge_tda18271_config);
+
+		tda18271_attach(&dev->ts1.analog_fe,
+			0x60, &dev->i2c_bus[1].i2c_adap,
+			&hauppauge_tda18271_config);
+
+		break;
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+			&hcw_s5h1411_config,
+			&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL)
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
+				0x60, &dev->i2c_bus[0].i2c_adap,
+				&hauppauge_tda18271_config);
+		break;
+	case CX23885_BOARD_MYGICA_X8558PRO:
+		switch (port->nr) {
+		/* port B */
+		case 1:
+			i2c_bus = &dev->i2c_bus[0];
+			fe0->dvb.frontend = dvb_attach(atbm8830_attach,
+				&mygica_x8558pro_atbm8830_cfg1,
+				&i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend != NULL) {
+				dvb_attach(max2165_attach,
+					fe0->dvb.frontend,
+					&i2c_bus->i2c_adap,
+					&mygic_x8558pro_max2165_cfg1);
+			}
+			break;
+		/* port C */
+		case 2:
+			i2c_bus = &dev->i2c_bus[1];
+			fe0->dvb.frontend = dvb_attach(atbm8830_attach,
+				&mygica_x8558pro_atbm8830_cfg2,
+				&i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend != NULL) {
+				dvb_attach(max2165_attach,
+					fe0->dvb.frontend,
+					&i2c_bus->i2c_adap,
+					&mygic_x8558pro_max2165_cfg2);
+			}
+			break;
+		}
+		break;
+	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
+		i2c_bus = &dev->i2c_bus[0];
+		mfe_shared = 1;/* MFE */
+		port->frontends.gate = 0;/* not clear for me yet */
+		/* ports B, C */
+		/* MFE frontend 1 DVB-T */
+		fe0->dvb.frontend = dvb_attach(stv0367ter_attach,
+					&netup_stv0367_config[port->nr - 1],
+					&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			if (NULL == dvb_attach(xc5000_attach,
+					fe0->dvb.frontend,
+					&i2c_bus->i2c_adap,
+					&netup_xc5000_config[port->nr - 1]))
+				goto frontend_detach;
+			/* load xc5000 firmware */
+			fe0->dvb.frontend->ops.tuner_ops.init(fe0->dvb.frontend);
+		}
+		/* MFE frontend 2 */
+		fe1 = videobuf_dvb_get_frontend(&port->frontends, 2);
+		if (fe1 == NULL)
+			goto frontend_detach;
+		/* DVB-C init */
+		fe1->dvb.frontend = dvb_attach(stv0367cab_attach,
+					&netup_stv0367_config[port->nr - 1],
+					&i2c_bus->i2c_adap);
+		if (fe1->dvb.frontend != NULL) {
+			fe1->dvb.frontend->id = 1;
+			if (NULL == dvb_attach(xc5000_attach,
+					fe1->dvb.frontend,
+					&i2c_bus->i2c_adap,
+					&netup_xc5000_config[port->nr - 1]))
+				goto frontend_detach;
+		}
+		break;
+	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+		i2c_bus = &dev->i2c_bus[0];
+		i2c_bus2 = &dev->i2c_bus[1];
+
+		switch (port->nr) {
+		/* port b */
+		case 1:
+			fe0->dvb.frontend = dvb_attach(drxk_attach,
+					&terratec_drxk_config[0],
+					&i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend != NULL) {
+				if (!dvb_attach(mt2063_attach,
+						fe0->dvb.frontend,
+						&terratec_mt2063_config[0],
+						&i2c_bus2->i2c_adap))
+					goto frontend_detach;
+			}
+			break;
+		/* port c */
+		case 2:
+			fe0->dvb.frontend = dvb_attach(drxk_attach,
+					&terratec_drxk_config[1],
+					&i2c_bus->i2c_adap);
+			if (fe0->dvb.frontend != NULL) {
+				if (!dvb_attach(mt2063_attach,
+						fe0->dvb.frontend,
+						&terratec_mt2063_config[1],
+						&i2c_bus2->i2c_adap))
+					goto frontend_detach;
+			}
+			break;
+		}
+		break;
+	case CX23885_BOARD_TEVII_S471:
+		i2c_bus = &dev->i2c_bus[1];
+
+		fe0->dvb.frontend = dvb_attach(ds3000_attach,
+					&tevii_ds3000_config,
+					&i2c_bus->i2c_adap);
+		break;
+	case CX23885_BOARD_PROF_8000:
+		i2c_bus = &dev->i2c_bus[0];
+
+		fe0->dvb.frontend = dvb_attach(stv090x_attach,
+						&prof_8000_stv090x_config,
+						&i2c_bus->i2c_adap,
+						STV090x_DEMODULATOR_0);
+		if (fe0->dvb.frontend != NULL) {
+			if (!dvb_attach(stb6100_attach,
+					fe0->dvb.frontend,
+					&prof_8000_stb6100_config,
+					&i2c_bus->i2c_adap))
+				goto frontend_detach;
+
+			fe0->dvb.frontend->ops.set_voltage = p8000_set_voltage;
+		}
+		break;
+	default:
+		printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
+			" isn't supported yet\n",
+		       dev->name);
+		break;
+	}
+
+	if ((NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend)) {
+		printk(KERN_ERR "%s: frontend initialization failed\n",
+		       dev->name);
+		goto frontend_detach;
+	}
+
+	/* define general-purpose callback pointer */
+	fe0->dvb.frontend->callback = cx23885_tuner_callback;
+	if (fe1)
+		fe1->dvb.frontend->callback = cx23885_tuner_callback;
+#if 0
+	/* Ensure all frontends negotiate bus access */
+	fe0->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl;
+	if (fe1)
+		fe1->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl;
+#endif
+
+	/* Put the analog decoder in standby to keep it quiet */
+	call_all(dev, core, s_power, 0);
+
+	if (fe0->dvb.frontend->ops.analog_ops.standby)
+		fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend);
+
+	/* register everything */
+	ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port,
+					&dev->pci->dev, adapter_nr, mfe_shared);
+	if (ret)
+		goto frontend_detach;
+
+	/* init CI & MAC */
+	switch (dev->board) {
+	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: {
+		static struct netup_card_info cinfo;
+
+		netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo);
+		memcpy(port->frontends.adapter.proposed_mac,
+				cinfo.port[port->nr - 1].mac, 6);
+		printk(KERN_INFO "NetUP Dual DVB-S2 CI card port%d MAC=%pM\n",
+			port->nr, port->frontends.adapter.proposed_mac);
+
+		netup_ci_init(port);
+		break;
+		}
+	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: {
+		struct altera_ci_config netup_ci_cfg = {
+			.dev = dev,/* magic number to identify*/
+			.adapter = &port->frontends.adapter,/* for CI */
+			.demux = &fe0->dvb.demux,/* for hw pid filter */
+			.fpga_rw = netup_altera_fpga_rw,
+		};
+
+		altera_ci_init(&netup_ci_cfg, port->nr);
+		break;
+		}
+	case CX23885_BOARD_TEVII_S470: {
+		u8 eeprom[256]; /* 24C02 i2c eeprom */
+
+		if (port->nr != 1)
+			break;
+
+		/* Read entire EEPROM */
+		dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
+		tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, sizeof(eeprom));
+		printk(KERN_INFO "TeVii S470 MAC= %pM\n", eeprom + 0xa0);
+		memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xa0, 6);
+		break;
+		}
+	}
+
+	return ret;
+
+frontend_detach:
+	port->gate_ctrl = NULL;
+	videobuf_dvb_dealloc_frontends(&port->frontends);
+	return -EINVAL;
+}
+
+int cx23885_dvb_register(struct cx23885_tsport *port)
+{
+
+	struct videobuf_dvb_frontend *fe0;
+	struct cx23885_dev *dev = port->dev;
+	int err, i;
+
+	/* Here we need to allocate the correct number of frontends,
+	 * as reflected in the cards struct. The reality is that currently
+	 * no cx23885 boards support this - yet. But, if we don't modify this
+	 * code then the second frontend would never be allocated (later)
+	 * and fail with error before the attach in dvb_register().
+	 * Without these changes we risk an OOPS later. The changes here
+	 * are for safety, and should provide a good foundation for the
+	 * future addition of any multi-frontend cx23885 based boards.
+	 */
+	printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__,
+		port->num_frontends);
+
+	for (i = 1; i <= port->num_frontends; i++) {
+		if (videobuf_dvb_alloc_frontend(
+			&port->frontends, i) == NULL) {
+			printk(KERN_ERR "%s() failed to alloc\n", __func__);
+			return -ENOMEM;
+		}
+
+		fe0 = videobuf_dvb_get_frontend(&port->frontends, i);
+		if (!fe0)
+			err = -EINVAL;
+
+		dprintk(1, "%s\n", __func__);
+		dprintk(1, " ->probed by Card=%d Name=%s, PCI %02x:%02x\n",
+			dev->board,
+			dev->name,
+			dev->pci_bus,
+			dev->pci_slot);
+
+		err = -ENODEV;
+
+		/* dvb stuff */
+		/* We have to init the queue for each frontend on a port. */
+		printk(KERN_INFO "%s: cx23885 based dvb card\n", dev->name);
+		videobuf_queue_sg_init(&fe0->dvb.dvbq, &dvb_qops,
+			    &dev->pci->dev, &port->slock,
+			    V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP,
+			    sizeof(struct cx23885_buffer), port, NULL);
+	}
+	err = dvb_register(port);
+	if (err != 0)
+		printk(KERN_ERR "%s() dvb_register failed err = %d\n",
+			__func__, err);
+
+	return err;
+}
+
+int cx23885_dvb_unregister(struct cx23885_tsport *port)
+{
+	struct videobuf_dvb_frontend *fe0;
+
+	/* FIXME: in an error condition where the we have
+	 * an expected number of frontends (attach problem)
+	 * then this might not clean up correctly, if 1
+	 * is invalid.
+	 * This comment only applies to future boards IF they
+	 * implement MFE support.
+	 */
+	fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
+	if (fe0 && fe0->dvb.frontend)
+		videobuf_dvb_unregister_bus(&port->frontends);
+
+	switch (port->dev->board) {
+	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+		netup_ci_exit(port);
+		break;
+	case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
+		altera_ci_release(port->dev, port->nr);
+		break;
+	}
+
+	port->gate_ctrl = NULL;
+
+	return 0;
+}
+
diff --git a/drivers/media/pci/cx23885/cx23885-f300.c b/drivers/media/pci/cx23885/cx23885-f300.c
new file mode 100644
index 0000000..93998f2
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-f300.c
@@ -0,0 +1,177 @@
+/*
+ * Driver for Silicon Labs C8051F300 microcontroller.
+ *
+ * It is used for LNB power control in TeVii S470,
+ * TBS 6920 PCIe DVB-S2 cards.
+ *
+ * Microcontroller connected to cx23885 GPIO pins:
+ * GPIO0 - data		- P0.3 F300
+ * GPIO1 - reset	- P0.2 F300
+ * GPIO2 - clk		- P0.1 F300
+ * GPIO3 - busy		- P0.0 F300
+ *
+ * Copyright (C) 2009 Igor M. Liplianin <liplianin@me.by>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "cx23885.h"
+
+#define F300_DATA	GPIO_0
+#define F300_RESET	GPIO_1
+#define F300_CLK	GPIO_2
+#define F300_BUSY	GPIO_3
+
+static void f300_set_line(struct cx23885_dev *dev, u32 line, u8 lvl)
+{
+	cx23885_gpio_enable(dev, line, 1);
+	if (lvl == 1)
+		cx23885_gpio_set(dev, line);
+	else
+		cx23885_gpio_clear(dev, line);
+}
+
+static u8 f300_get_line(struct cx23885_dev *dev, u32 line)
+{
+	cx23885_gpio_enable(dev, line, 0);
+
+	return cx23885_gpio_get(dev, line);
+}
+
+static void f300_send_byte(struct cx23885_dev *dev, u8 dta)
+{
+	u8 i;
+
+	for (i = 0; i < 8; i++) {
+		f300_set_line(dev, F300_CLK, 0);
+		udelay(30);
+		f300_set_line(dev, F300_DATA, (dta & 0x80) >> 7);/* msb first */
+		udelay(30);
+		dta <<= 1;
+		f300_set_line(dev, F300_CLK, 1);
+		udelay(30);
+	}
+}
+
+static u8 f300_get_byte(struct cx23885_dev *dev)
+{
+	u8 i, dta = 0;
+
+	for (i = 0; i < 8; i++) {
+		f300_set_line(dev, F300_CLK, 0);
+		udelay(30);
+		dta <<= 1;
+		f300_set_line(dev, F300_CLK, 1);
+		udelay(30);
+		dta |= f300_get_line(dev, F300_DATA);/* msb first */
+
+	}
+
+	return dta;
+}
+
+static u8 f300_xfer(struct dvb_frontend *fe, u8 *buf)
+{
+	struct cx23885_tsport *port = fe->dvb->priv;
+	struct cx23885_dev *dev = port->dev;
+	u8 i, temp, ret = 0;
+
+	temp = buf[0];
+	for (i = 0; i < buf[0]; i++)
+		temp += buf[i + 1];
+	temp = (~temp + 1);/* get check sum */
+	buf[1 + buf[0]] = temp;
+
+	f300_set_line(dev, F300_RESET, 1);
+	f300_set_line(dev, F300_CLK, 1);
+	udelay(30);
+	f300_set_line(dev, F300_DATA, 1);
+	msleep(1);
+
+	/* question: */
+	f300_set_line(dev, F300_RESET, 0);/* begin to send data */
+	msleep(1);
+
+	f300_send_byte(dev, 0xe0);/* the slave address is 0xe0, write */
+	msleep(1);
+
+	temp = buf[0];
+	temp += 2;
+	for (i = 0; i < temp; i++)
+		f300_send_byte(dev, buf[i]);
+
+	f300_set_line(dev, F300_RESET, 1);/* sent data over */
+	f300_set_line(dev, F300_DATA, 1);
+
+	/* answer: */
+	temp = 0;
+	for (i = 0; ((i < 8) & (temp == 0)); i++) {
+		msleep(1);
+		if (f300_get_line(dev, F300_BUSY) == 0)
+			temp = 1;
+	}
+
+	if (i > 7) {
+		printk(KERN_ERR "%s: timeout, the slave no response\n",
+								__func__);
+		ret = 1; /* timeout, the slave no response */
+	} else { /* the slave not busy, prepare for getting data */
+		f300_set_line(dev, F300_RESET, 0);/*ready...*/
+		msleep(1);
+		f300_send_byte(dev, 0xe1);/* 0xe1 is Read */
+		msleep(1);
+		temp = f300_get_byte(dev);/*get the data length */
+		if (temp > 14)
+			temp = 14;
+
+		for (i = 0; i < (temp + 1); i++)
+			f300_get_byte(dev);/* get data to empty buffer */
+
+		f300_set_line(dev, F300_RESET, 1);/* received data over */
+		f300_set_line(dev, F300_DATA, 1);
+	}
+
+	return ret;
+}
+
+int f300_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+	u8 buf[16];
+
+	buf[0] = 0x05;
+	buf[1] = 0x38;/* write port */
+	buf[2] = 0x01;/* A port, lnb power */
+
+	switch (voltage) {
+	case SEC_VOLTAGE_13:
+		buf[3] = 0x01;/* power on */
+		buf[4] = 0x02;/* B port, H/V */
+		buf[5] = 0x00;/*13V v*/
+		break;
+	case SEC_VOLTAGE_18:
+		buf[3] = 0x01;
+		buf[4] = 0x02;
+		buf[5] = 0x01;/* 18V h*/
+		break;
+	case SEC_VOLTAGE_OFF:
+		buf[3] = 0x00;/* power off */
+		buf[4] = 0x00;
+		buf[5] = 0x00;
+		break;
+	}
+
+	return f300_xfer(fe, buf);
+}
diff --git a/drivers/media/pci/cx23885/cx23885-f300.h b/drivers/media/pci/cx23885/cx23885-f300.h
new file mode 100644
index 0000000..e73344c
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-f300.h
@@ -0,0 +1,2 @@
+extern int f300_set_voltage(struct dvb_frontend *fe,
+				fe_sec_voltage_t voltage);
diff --git a/drivers/media/pci/cx23885/cx23885-i2c.c b/drivers/media/pci/cx23885/cx23885-i2c.c
new file mode 100644
index 0000000..4887314
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-i2c.c
@@ -0,0 +1,396 @@
+/*
+ *  Driver for the Conexant CX23885 PCIe bridge
+ *
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#include "cx23885.h"
+
+#include <media/v4l2-common.h>
+
+static unsigned int i2c_debug;
+module_param(i2c_debug, int, 0644);
+MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
+
+static unsigned int i2c_scan;
+module_param(i2c_scan, int, 0444);
+MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
+
+#define dprintk(level, fmt, arg...)\
+	do { if (i2c_debug >= level)\
+		printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\
+	} while (0)
+
+#define I2C_WAIT_DELAY 32
+#define I2C_WAIT_RETRY 64
+
+#define I2C_EXTEND  (1 << 3)
+#define I2C_NOSTOP  (1 << 4)
+
+static inline int i2c_slave_did_ack(struct i2c_adapter *i2c_adap)
+{
+	struct cx23885_i2c *bus = i2c_adap->algo_data;
+	struct cx23885_dev *dev = bus->dev;
+	return cx_read(bus->reg_stat) & 0x01;
+}
+
+static inline int i2c_is_busy(struct i2c_adapter *i2c_adap)
+{
+	struct cx23885_i2c *bus = i2c_adap->algo_data;
+	struct cx23885_dev *dev = bus->dev;
+	return cx_read(bus->reg_stat) & 0x02 ? 1 : 0;
+}
+
+static int i2c_wait_done(struct i2c_adapter *i2c_adap)
+{
+	int count;
+
+	for (count = 0; count < I2C_WAIT_RETRY; count++) {
+		if (!i2c_is_busy(i2c_adap))
+			break;
+		udelay(I2C_WAIT_DELAY);
+	}
+
+	if (I2C_WAIT_RETRY == count)
+		return 0;
+
+	return 1;
+}
+
+static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
+			 const struct i2c_msg *msg, int joined_rlen)
+{
+	struct cx23885_i2c *bus = i2c_adap->algo_data;
+	struct cx23885_dev *dev = bus->dev;
+	u32 wdata, addr, ctrl;
+	int retval, cnt;
+
+	if (joined_rlen)
+		dprintk(1, "%s(msg->wlen=%d, nextmsg->rlen=%d)\n", __func__,
+			msg->len, joined_rlen);
+	else
+		dprintk(1, "%s(msg->len=%d)\n", __func__, msg->len);
+
+	/* Deal with i2c probe functions with zero payload */
+	if (msg->len == 0) {
+		cx_write(bus->reg_addr, msg->addr << 25);
+		cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2));
+		if (!i2c_wait_done(i2c_adap))
+			return -EIO;
+		if (!i2c_slave_did_ack(i2c_adap))
+			return -ENXIO;
+
+		dprintk(1, "%s() returns 0\n", __func__);
+		return 0;
+	}
+
+
+	/* dev, reg + first byte */
+	addr = (msg->addr << 25) | msg->buf[0];
+	wdata = msg->buf[0];
+	ctrl = bus->i2c_period | (1 << 12) | (1 << 2);
+
+	if (msg->len > 1)
+		ctrl |= I2C_NOSTOP | I2C_EXTEND;
+	else if (joined_rlen)
+		ctrl |= I2C_NOSTOP;
+
+	cx_write(bus->reg_addr, addr);
+	cx_write(bus->reg_wdata, wdata);
+	cx_write(bus->reg_ctrl, ctrl);
+
+	if (!i2c_wait_done(i2c_adap))
+		goto eio;
+	if (i2c_debug) {
+		printk(" <W %02x %02x", msg->addr << 1, msg->buf[0]);
+		if (!(ctrl & I2C_NOSTOP))
+			printk(" >\n");
+	}
+
+	for (cnt = 1; cnt < msg->len; cnt++) {
+		/* following bytes */
+		wdata = msg->buf[cnt];
+		ctrl = bus->i2c_period | (1 << 12) | (1 << 2);
+
+		if (cnt < msg->len - 1)
+			ctrl |= I2C_NOSTOP | I2C_EXTEND;
+		else if (joined_rlen)
+			ctrl |= I2C_NOSTOP;
+
+		cx_write(bus->reg_addr, addr);
+		cx_write(bus->reg_wdata, wdata);
+		cx_write(bus->reg_ctrl, ctrl);
+
+		if (!i2c_wait_done(i2c_adap))
+			goto eio;
+		if (i2c_debug) {
+			dprintk(1, " %02x", msg->buf[cnt]);
+			if (!(ctrl & I2C_NOSTOP))
+				dprintk(1, " >\n");
+		}
+	}
+	return msg->len;
+
+ eio:
+	retval = -EIO;
+	if (i2c_debug)
+		printk(KERN_ERR " ERR: %d\n", retval);
+	return retval;
+}
+
+static int i2c_readbytes(struct i2c_adapter *i2c_adap,
+			 const struct i2c_msg *msg, int joined)
+{
+	struct cx23885_i2c *bus = i2c_adap->algo_data;
+	struct cx23885_dev *dev = bus->dev;
+	u32 ctrl, cnt;
+	int retval;
+
+
+	if (i2c_debug && !joined)
+		dprintk(1, "%s(msg->len=%d)\n", __func__, msg->len);
+
+	/* Deal with i2c probe functions with zero payload */
+	if (msg->len == 0) {
+		cx_write(bus->reg_addr, msg->addr << 25);
+		cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2) | 1);
+		if (!i2c_wait_done(i2c_adap))
+			return -EIO;
+		if (!i2c_slave_did_ack(i2c_adap))
+			return -ENXIO;
+
+
+		dprintk(1, "%s() returns 0\n", __func__);
+		return 0;
+	}
+
+	if (i2c_debug) {
+		if (joined)
+			dprintk(1, " R");
+		else
+			dprintk(1, " <R %02x", (msg->addr << 1) + 1);
+	}
+
+	for (cnt = 0; cnt < msg->len; cnt++) {
+
+		ctrl = bus->i2c_period | (1 << 12) | (1 << 2) | 1;
+
+		if (cnt < msg->len - 1)
+			ctrl |= I2C_NOSTOP | I2C_EXTEND;
+
+		cx_write(bus->reg_addr, msg->addr << 25);
+		cx_write(bus->reg_ctrl, ctrl);
+
+		if (!i2c_wait_done(i2c_adap))
+			goto eio;
+		msg->buf[cnt] = cx_read(bus->reg_rdata) & 0xff;
+		if (i2c_debug) {
+			dprintk(1, " %02x", msg->buf[cnt]);
+			if (!(ctrl & I2C_NOSTOP))
+				dprintk(1, " >\n");
+		}
+	}
+	return msg->len;
+
+ eio:
+	retval = -EIO;
+	if (i2c_debug)
+		printk(KERN_ERR " ERR: %d\n", retval);
+	return retval;
+}
+
+static int i2c_xfer(struct i2c_adapter *i2c_adap,
+		    struct i2c_msg *msgs, int num)
+{
+	struct cx23885_i2c *bus = i2c_adap->algo_data;
+	struct cx23885_dev *dev = bus->dev;
+	int i, retval = 0;
+
+	dprintk(1, "%s(num = %d)\n", __func__, num);
+
+	for (i = 0 ; i < num; i++) {
+		dprintk(1, "%s(num = %d) addr = 0x%02x  len = 0x%x\n",
+			__func__, num, msgs[i].addr, msgs[i].len);
+		if (msgs[i].flags & I2C_M_RD) {
+			/* read */
+			retval = i2c_readbytes(i2c_adap, &msgs[i], 0);
+		} else if (i + 1 < num && (msgs[i + 1].flags & I2C_M_RD) &&
+			   msgs[i].addr == msgs[i + 1].addr) {
+			/* write then read from same address */
+			retval = i2c_sendbytes(i2c_adap, &msgs[i],
+					       msgs[i + 1].len);
+			if (retval < 0)
+				goto err;
+			i++;
+			retval = i2c_readbytes(i2c_adap, &msgs[i], 1);
+		} else {
+			/* write */
+			retval = i2c_sendbytes(i2c_adap, &msgs[i], 0);
+		}
+		if (retval < 0)
+			goto err;
+	}
+	return num;
+
+ err:
+	return retval;
+}
+
+static u32 cx23885_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm cx23885_i2c_algo_template = {
+	.master_xfer	= i2c_xfer,
+	.functionality	= cx23885_functionality,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct i2c_adapter cx23885_i2c_adap_template = {
+	.name              = "cx23885",
+	.owner             = THIS_MODULE,
+	.algo              = &cx23885_i2c_algo_template,
+};
+
+static struct i2c_client cx23885_i2c_client_template = {
+	.name	= "cx23885 internal",
+};
+
+static char *i2c_devs[128] = {
+	[0x10 >> 1] = "tda10048",
+	[0x12 >> 1] = "dib7000pc",
+	[0x1c >> 1] = "lgdt3303",
+	[0x86 >> 1] = "tda9887",
+	[0x32 >> 1] = "cx24227",
+	[0x88 >> 1] = "cx25837",
+	[0x84 >> 1] = "tda8295",
+	[0x98 >> 1] = "flatiron",
+	[0xa0 >> 1] = "eeprom",
+	[0xc0 >> 1] = "tuner/mt2131/tda8275",
+	[0xc2 >> 1] = "tuner/mt2131/tda8275/xc5000/xc3028",
+	[0xc8 >> 1] = "tuner/xc3028L",
+};
+
+static void do_i2c_scan(char *name, struct i2c_client *c)
+{
+	unsigned char buf;
+	int i, rc;
+
+	for (i = 0; i < 128; i++) {
+		c->addr = i;
+		rc = i2c_master_recv(c, &buf, 0);
+		if (rc < 0)
+			continue;
+		printk(KERN_INFO "%s: i2c scan: found device @ 0x%x  [%s]\n",
+		       name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
+	}
+}
+
+/* init + register i2c adapter */
+int cx23885_i2c_register(struct cx23885_i2c *bus)
+{
+	struct cx23885_dev *dev = bus->dev;
+
+	dprintk(1, "%s(bus = %d)\n", __func__, bus->nr);
+
+	bus->i2c_adap = cx23885_i2c_adap_template;
+	bus->i2c_client = cx23885_i2c_client_template;
+	bus->i2c_adap.dev.parent = &dev->pci->dev;
+
+	strlcpy(bus->i2c_adap.name, bus->dev->name,
+		sizeof(bus->i2c_adap.name));
+
+	bus->i2c_adap.algo_data = bus;
+	i2c_set_adapdata(&bus->i2c_adap, &dev->v4l2_dev);
+	i2c_add_adapter(&bus->i2c_adap);
+
+	bus->i2c_client.adapter = &bus->i2c_adap;
+
+	if (0 == bus->i2c_rc) {
+		dprintk(1, "%s: i2c bus %d registered\n", dev->name, bus->nr);
+		if (i2c_scan) {
+			printk(KERN_INFO "%s: scan bus %d:\n",
+					dev->name, bus->nr);
+			do_i2c_scan(dev->name, &bus->i2c_client);
+		}
+	} else
+		printk(KERN_WARNING "%s: i2c bus %d register FAILED\n",
+			dev->name, bus->nr);
+
+	/* Instantiate the IR receiver device, if present */
+	if (0 == bus->i2c_rc) {
+		struct i2c_board_info info;
+		const unsigned short addr_list[] = {
+			0x6b, I2C_CLIENT_END
+		};
+
+		memset(&info, 0, sizeof(struct i2c_board_info));
+		strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+		/* Use quick read command for probe, some IR chips don't
+		 * support writes */
+		i2c_new_probed_device(&bus->i2c_adap, &info, addr_list,
+				      i2c_probe_func_quick_read);
+	}
+
+	return bus->i2c_rc;
+}
+
+int cx23885_i2c_unregister(struct cx23885_i2c *bus)
+{
+	i2c_del_adapter(&bus->i2c_adap);
+	return 0;
+}
+
+void cx23885_av_clk(struct cx23885_dev *dev, int enable)
+{
+	/* write 0 to bus 2 addr 0x144 via i2x_xfer() */
+	char buffer[3];
+	struct i2c_msg msg;
+	dprintk(1, "%s(enabled = %d)\n", __func__, enable);
+
+	/* Register 0x144 */
+	buffer[0] = 0x01;
+	buffer[1] = 0x44;
+	if (enable == 1)
+		buffer[2] = 0x05;
+	else
+		buffer[2] = 0x00;
+
+	msg.addr = 0x44;
+	msg.flags = I2C_M_TEN;
+	msg.len = 3;
+	msg.buf = buffer;
+
+	i2c_xfer(&dev->i2c_bus[2].i2c_adap, &msg, 1);
+}
+
+/* ----------------------------------------------------------------------- */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/pci/cx23885/cx23885-input.c b/drivers/media/pci/cx23885/cx23885-input.c
new file mode 100644
index 0000000..2c925f7
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-input.c
@@ -0,0 +1,365 @@
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  Infrared remote control input device
+ *
+ *  Most of this file is
+ *
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  However, the cx23885_input_{init,fini} functions contained herein are
+ *  derived from Linux kernel files linux/media/video/.../...-input.c marked as:
+ *
+ *  Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
+ *  Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
+ *		       Markus Rechberger <mrechberger@gmail.com>
+ *		       Mauro Carvalho Chehab <mchehab@infradead.org>
+ *		       Sascha Sommer <saschasommer@freenet.de>
+ *  Copyright (C) 2004, 2005 Chris Pascoe
+ *  Copyright (C) 2003, 2004 Gerd Knorr
+ *  Copyright (C) 2003 Pavel Machek
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ */
+
+#include <linux/slab.h>
+#include <media/rc-core.h>
+#include <media/v4l2-subdev.h>
+
+#include "cx23885.h"
+
+#define MODULE_NAME "cx23885"
+
+static void cx23885_input_process_measurements(struct cx23885_dev *dev,
+					       bool overrun)
+{
+	struct cx23885_kernel_ir *kernel_ir = dev->kernel_ir;
+
+	ssize_t num;
+	int count, i;
+	bool handle = false;
+	struct ir_raw_event ir_core_event[64];
+
+	do {
+		num = 0;
+		v4l2_subdev_call(dev->sd_ir, ir, rx_read, (u8 *) ir_core_event,
+				 sizeof(ir_core_event), &num);
+
+		count = num / sizeof(struct ir_raw_event);
+
+		for (i = 0; i < count; i++) {
+			ir_raw_event_store(kernel_ir->rc,
+					   &ir_core_event[i]);
+			handle = true;
+		}
+	} while (num != 0);
+
+	if (overrun)
+		ir_raw_event_reset(kernel_ir->rc);
+	else if (handle)
+		ir_raw_event_handle(kernel_ir->rc);
+}
+
+void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
+{
+	struct v4l2_subdev_ir_parameters params;
+	int overrun, data_available;
+
+	if (dev->sd_ir == NULL || events == 0)
+		return;
+
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+	case CX23885_BOARD_TEVII_S470:
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		/*
+		 * The only boards we handle right now.  However other boards
+		 * using the CX2388x integrated IR controller should be similar
+		 */
+		break;
+	default:
+		return;
+	}
+
+	overrun = events & (V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN |
+			    V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN);
+
+	data_available = events & (V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED |
+				   V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ);
+
+	if (overrun) {
+		/* If there was a FIFO overrun, stop the device */
+		v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
+		params.enable = false;
+		/* Mitigate race with cx23885_input_ir_stop() */
+		params.shutdown = atomic_read(&dev->ir_input_stopping);
+		v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
+	}
+
+	if (data_available)
+		cx23885_input_process_measurements(dev, overrun);
+
+	if (overrun) {
+		/* If there was a FIFO overrun, clear & restart the device */
+		params.enable = true;
+		/* Mitigate race with cx23885_input_ir_stop() */
+		params.shutdown = atomic_read(&dev->ir_input_stopping);
+		v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
+	}
+}
+
+static int cx23885_input_ir_start(struct cx23885_dev *dev)
+{
+	struct v4l2_subdev_ir_parameters params;
+
+	if (dev->sd_ir == NULL)
+		return -ENODEV;
+
+	atomic_set(&dev->ir_input_stopping, 0);
+
+	v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		/*
+		 * The IR controller on this board only returns pulse widths.
+		 * Any other mode setting will fail to set up the device.
+		*/
+		params.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+		params.enable = true;
+		params.interrupt_enable = true;
+		params.shutdown = false;
+
+		/* Setup for baseband compatible with both RC-5 and RC-6A */
+		params.modulation = false;
+		/* RC-5:  2,222,222 ns = 1/36 kHz * 32 cycles * 2 marks * 1.25*/
+		/* RC-6A: 3,333,333 ns = 1/36 kHz * 16 cycles * 6 marks * 1.25*/
+		params.max_pulse_width = 3333333; /* ns */
+		/* RC-5:    666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */
+		/* RC-6A:   333,333 ns = 1/36 kHz * 16 cycles * 1 mark * 0.75 */
+		params.noise_filter_min_width = 333333; /* ns */
+		/*
+		 * This board has inverted receive sense:
+		 * mark is received as low logic level;
+		 * falling edges are detected as rising edges; etc.
+		 */
+		params.invert_level = true;
+		break;
+	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+	case CX23885_BOARD_TEVII_S470:
+		/*
+		 * The IR controller on this board only returns pulse widths.
+		 * Any other mode setting will fail to set up the device.
+		 */
+		params.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+		params.enable = true;
+		params.interrupt_enable = true;
+		params.shutdown = false;
+
+		/* Setup for a standard NEC protocol */
+		params.carrier_freq = 37917; /* Hz, 455 kHz/12 for NEC */
+		params.carrier_range_lower = 33000; /* Hz */
+		params.carrier_range_upper = 43000; /* Hz */
+		params.duty_cycle = 33; /* percent, 33 percent for NEC */
+
+		/*
+		 * NEC max pulse width: (64/3)/(455 kHz/12) * 16 nec_units
+		 * (64/3)/(455 kHz/12) * 16 nec_units * 1.375 = 12378022 ns
+		 */
+		params.max_pulse_width = 12378022; /* ns */
+
+		/*
+		 * NEC noise filter min width: (64/3)/(455 kHz/12) * 1 nec_unit
+		 * (64/3)/(455 kHz/12) * 1 nec_units * 0.625 = 351648 ns
+		 */
+		params.noise_filter_min_width = 351648; /* ns */
+
+		params.modulation = false;
+		params.invert_level = true;
+		break;
+	}
+	v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
+	return 0;
+}
+
+static int cx23885_input_ir_open(struct rc_dev *rc)
+{
+	struct cx23885_kernel_ir *kernel_ir = rc->priv;
+
+	if (kernel_ir->cx == NULL)
+		return -ENODEV;
+
+	return cx23885_input_ir_start(kernel_ir->cx);
+}
+
+static void cx23885_input_ir_stop(struct cx23885_dev *dev)
+{
+	struct v4l2_subdev_ir_parameters params;
+
+	if (dev->sd_ir == NULL)
+		return;
+
+	/*
+	 * Stop the sd_ir subdevice from generating notifications and
+	 * scheduling work.
+	 * It is shutdown this way in order to mitigate a race with
+	 * cx23885_input_rx_work_handler() in the overrun case, which could
+	 * re-enable the subdevice.
+	 */
+	atomic_set(&dev->ir_input_stopping, 1);
+	v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
+	while (params.shutdown == false) {
+		params.enable = false;
+		params.interrupt_enable = false;
+		params.shutdown = true;
+		v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
+		v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
+	}
+	flush_work(&dev->cx25840_work);
+	flush_work(&dev->ir_rx_work);
+	flush_work(&dev->ir_tx_work);
+}
+
+static void cx23885_input_ir_close(struct rc_dev *rc)
+{
+	struct cx23885_kernel_ir *kernel_ir = rc->priv;
+
+	if (kernel_ir->cx != NULL)
+		cx23885_input_ir_stop(kernel_ir->cx);
+}
+
+int cx23885_input_init(struct cx23885_dev *dev)
+{
+	struct cx23885_kernel_ir *kernel_ir;
+	struct rc_dev *rc;
+	char *rc_map;
+	enum rc_driver_type driver_type;
+	unsigned long allowed_protos;
+
+	int ret;
+
+	/*
+	 * If the IR device (hardware registers, chip, GPIO lines, etc.) isn't
+	 * encapsulated in a v4l2_subdev, then I'm not going to deal with it.
+	 */
+	if (dev->sd_ir == NULL)
+		return -ENODEV;
+
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1270:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+		/* Integrated CX2388[58] IR controller */
+		driver_type = RC_DRIVER_IR_RAW;
+		allowed_protos = RC_TYPE_ALL;
+		/* The grey Hauppauge RC-5 remote */
+		rc_map = RC_MAP_HAUPPAUGE;
+		break;
+	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
+		/* Integrated CX23885 IR controller */
+		driver_type = RC_DRIVER_IR_RAW;
+		allowed_protos = RC_TYPE_NEC;
+		/* The grey Terratec remote with orange buttons */
+		rc_map = RC_MAP_NEC_TERRATEC_CINERGY_XS;
+		break;
+	case CX23885_BOARD_TEVII_S470:
+		/* Integrated CX23885 IR controller */
+		driver_type = RC_DRIVER_IR_RAW;
+		allowed_protos = RC_TYPE_ALL;
+		/* A guess at the remote */
+		rc_map = RC_MAP_TEVII_NEC;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	/* cx23885 board instance kernel IR state */
+	kernel_ir = kzalloc(sizeof(struct cx23885_kernel_ir), GFP_KERNEL);
+	if (kernel_ir == NULL)
+		return -ENOMEM;
+
+	kernel_ir->cx = dev;
+	kernel_ir->name = kasprintf(GFP_KERNEL, "cx23885 IR (%s)",
+				    cx23885_boards[dev->board].name);
+	kernel_ir->phys = kasprintf(GFP_KERNEL, "pci-%s/ir0",
+				    pci_name(dev->pci));
+
+	/* input device */
+	rc = rc_allocate_device();
+	if (!rc) {
+		ret = -ENOMEM;
+		goto err_out_free;
+	}
+
+	kernel_ir->rc = rc;
+	rc->input_name = kernel_ir->name;
+	rc->input_phys = kernel_ir->phys;
+	rc->input_id.bustype = BUS_PCI;
+	rc->input_id.version = 1;
+	if (dev->pci->subsystem_vendor) {
+		rc->input_id.vendor  = dev->pci->subsystem_vendor;
+		rc->input_id.product = dev->pci->subsystem_device;
+	} else {
+		rc->input_id.vendor  = dev->pci->vendor;
+		rc->input_id.product = dev->pci->device;
+	}
+	rc->dev.parent = &dev->pci->dev;
+	rc->driver_type = driver_type;
+	rc->allowed_protos = allowed_protos;
+	rc->priv = kernel_ir;
+	rc->open = cx23885_input_ir_open;
+	rc->close = cx23885_input_ir_close;
+	rc->map_name = rc_map;
+	rc->driver_name = MODULE_NAME;
+
+	/* Go */
+	dev->kernel_ir = kernel_ir;
+	ret = rc_register_device(rc);
+	if (ret)
+		goto err_out_stop;
+
+	return 0;
+
+err_out_stop:
+	cx23885_input_ir_stop(dev);
+	dev->kernel_ir = NULL;
+	rc_free_device(rc);
+err_out_free:
+	kfree(kernel_ir->phys);
+	kfree(kernel_ir->name);
+	kfree(kernel_ir);
+	return ret;
+}
+
+void cx23885_input_fini(struct cx23885_dev *dev)
+{
+	/* Always stop the IR hardware from generating interrupts */
+	cx23885_input_ir_stop(dev);
+
+	if (dev->kernel_ir == NULL)
+		return;
+	rc_unregister_device(dev->kernel_ir->rc);
+	kfree(dev->kernel_ir->phys);
+	kfree(dev->kernel_ir->name);
+	kfree(dev->kernel_ir);
+	dev->kernel_ir = NULL;
+}
diff --git a/drivers/media/pci/cx23885/cx23885-input.h b/drivers/media/pci/cx23885/cx23885-input.h
new file mode 100644
index 0000000..75ef15d
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-input.h
@@ -0,0 +1,30 @@
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  Infrared remote control input device
+ *
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ */
+
+#ifndef _CX23885_INPUT_H_
+#define _CX23885_INPUT_H_
+int cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events);
+
+int cx23885_input_init(struct cx23885_dev *dev);
+void cx23885_input_fini(struct cx23885_dev *dev);
+#endif
diff --git a/drivers/media/pci/cx23885/cx23885-ioctl.c b/drivers/media/pci/cx23885/cx23885-ioctl.c
new file mode 100644
index 0000000..44812ca
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-ioctl.c
@@ -0,0 +1,208 @@
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  Various common ioctl() support functions
+ *
+ *  Copyright (c) 2009 Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "cx23885.h"
+#include <media/v4l2-chip-ident.h>
+
+int cx23885_g_chip_ident(struct file *file, void *fh,
+			 struct v4l2_dbg_chip_ident *chip)
+{
+	struct cx23885_dev *dev = ((struct cx23885_fh *)fh)->dev;
+	int err = 0;
+	u8 rev;
+
+	chip->ident = V4L2_IDENT_NONE;
+	chip->revision = 0;
+	switch (chip->match.type) {
+	case V4L2_CHIP_MATCH_HOST:
+		switch (chip->match.addr) {
+		case 0:
+			rev = cx_read(RDR_CFG2) & 0xff;
+			switch (dev->pci->device) {
+			case 0x8852:
+				/* rev 0x04 could be '885 or '888. Pick '888. */
+				if (rev == 0x04)
+					chip->ident = V4L2_IDENT_CX23888;
+				else
+					chip->ident = V4L2_IDENT_CX23885;
+				break;
+			case 0x8880:
+				if (rev == 0x0e || rev == 0x0f)
+					chip->ident = V4L2_IDENT_CX23887;
+				else
+					chip->ident = V4L2_IDENT_CX23888;
+				break;
+			default:
+				chip->ident = V4L2_IDENT_UNKNOWN;
+				break;
+			}
+			chip->revision = (dev->pci->device << 16) | (rev << 8) |
+					 (dev->hwrevision & 0xff);
+			break;
+		case 1:
+			if (dev->v4l_device != NULL) {
+				chip->ident = V4L2_IDENT_CX23417;
+				chip->revision = 0;
+			}
+			break;
+		case 2:
+			/*
+			 * The integrated IR controller on the CX23888 is
+			 * host chip 2.  It may not be used/initialized or sd_ir
+			 * may be pointing at the cx25840 subdevice for the
+			 * IR controller on the CX23885.  Thus we find it
+			 * without using the dev->sd_ir pointer.
+			 */
+			call_hw(dev, CX23885_HW_888_IR, core, g_chip_ident,
+				chip);
+			break;
+		default:
+			err = -EINVAL; /* per V4L2 spec */
+			break;
+		}
+		break;
+	case V4L2_CHIP_MATCH_I2C_DRIVER:
+		/* If needed, returns V4L2_IDENT_AMBIGUOUS without extra work */
+		call_all(dev, core, g_chip_ident, chip);
+		break;
+	case V4L2_CHIP_MATCH_I2C_ADDR:
+		/*
+		 * We could return V4L2_IDENT_UNKNOWN, but we don't do the work
+		 * to look if a chip is at the address with no driver.  That's a
+		 * dangerous thing to do with EEPROMs anyway.
+		 */
+		call_all(dev, core, g_chip_ident, chip);
+		break;
+	default:
+		err = -EINVAL;
+		break;
+	}
+	return err;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int cx23885_g_host_register(struct cx23885_dev *dev,
+				   struct v4l2_dbg_register *reg)
+{
+	if ((reg->reg & 0x3) != 0 || reg->reg >= pci_resource_len(dev->pci, 0))
+		return -EINVAL;
+
+	reg->size = 4;
+	reg->val = cx_read(reg->reg);
+	return 0;
+}
+
+static int cx23417_g_register(struct cx23885_dev *dev,
+			      struct v4l2_dbg_register *reg)
+{
+	u32 value;
+
+	if (dev->v4l_device == NULL)
+		return -EINVAL;
+
+	if ((reg->reg & 0x3) != 0 || reg->reg >= 0x10000)
+		return -EINVAL;
+
+	if (mc417_register_read(dev, (u16) reg->reg, &value))
+		return -EINVAL; /* V4L2 spec, but -EREMOTEIO really */
+
+	reg->size = 4;
+	reg->val = value;
+	return 0;
+}
+
+int cx23885_g_register(struct file *file, void *fh,
+		       struct v4l2_dbg_register *reg)
+{
+	struct cx23885_dev *dev = ((struct cx23885_fh *)fh)->dev;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	if (reg->match.type == V4L2_CHIP_MATCH_HOST) {
+		switch (reg->match.addr) {
+		case 0:
+			return cx23885_g_host_register(dev, reg);
+		case 1:
+			return cx23417_g_register(dev, reg);
+		default:
+			break;
+		}
+	}
+
+	/* FIXME - any error returns should not be ignored */
+	call_all(dev, core, g_register, reg);
+	return 0;
+}
+
+static int cx23885_s_host_register(struct cx23885_dev *dev,
+				   struct v4l2_dbg_register *reg)
+{
+	if ((reg->reg & 0x3) != 0 || reg->reg >= pci_resource_len(dev->pci, 0))
+		return -EINVAL;
+
+	reg->size = 4;
+	cx_write(reg->reg, reg->val);
+	return 0;
+}
+
+static int cx23417_s_register(struct cx23885_dev *dev,
+			      struct v4l2_dbg_register *reg)
+{
+	if (dev->v4l_device == NULL)
+		return -EINVAL;
+
+	if ((reg->reg & 0x3) != 0 || reg->reg >= 0x10000)
+		return -EINVAL;
+
+	if (mc417_register_write(dev, (u16) reg->reg, (u32) reg->val))
+		return -EINVAL; /* V4L2 spec, but -EREMOTEIO really */
+
+	reg->size = 4;
+	return 0;
+}
+
+int cx23885_s_register(struct file *file, void *fh,
+		       struct v4l2_dbg_register *reg)
+{
+	struct cx23885_dev *dev = ((struct cx23885_fh *)fh)->dev;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	if (reg->match.type == V4L2_CHIP_MATCH_HOST) {
+		switch (reg->match.addr) {
+		case 0:
+			return cx23885_s_host_register(dev, reg);
+		case 1:
+			return cx23417_s_register(dev, reg);
+		default:
+			break;
+		}
+	}
+
+	/* FIXME - any error returns should not be ignored */
+	call_all(dev, core, s_register, reg);
+	return 0;
+}
+#endif
diff --git a/drivers/media/pci/cx23885/cx23885-ioctl.h b/drivers/media/pci/cx23885/cx23885-ioctl.h
new file mode 100644
index 0000000..315be0c
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-ioctl.h
@@ -0,0 +1,39 @@
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  Various common ioctl() support functions
+ *
+ *  Copyright (c) 2009 Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _CX23885_IOCTL_H_
+#define _CX23885_IOCTL_H_
+
+int cx23885_g_chip_ident(struct file *file, void *fh,
+			 struct v4l2_dbg_chip_ident *chip);
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+int cx23885_g_register(struct file *file, void *fh,
+		       struct v4l2_dbg_register *reg);
+
+
+int cx23885_s_register(struct file *file, void *fh,
+		       struct v4l2_dbg_register *reg);
+
+#endif
+#endif
diff --git a/drivers/media/pci/cx23885/cx23885-ir.c b/drivers/media/pci/cx23885/cx23885-ir.c
new file mode 100644
index 0000000..7125247
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-ir.c
@@ -0,0 +1,117 @@
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  Infrared device support routines - non-input, non-vl42_subdev routines
+ *
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ */
+
+#include <media/v4l2-device.h>
+
+#include "cx23885.h"
+#include "cx23885-input.h"
+
+#define CX23885_IR_RX_FIFO_SERVICE_REQ		0
+#define CX23885_IR_RX_END_OF_RX_DETECTED	1
+#define CX23885_IR_RX_HW_FIFO_OVERRUN		2
+#define CX23885_IR_RX_SW_FIFO_OVERRUN		3
+
+#define CX23885_IR_TX_FIFO_SERVICE_REQ		0
+
+
+void cx23885_ir_rx_work_handler(struct work_struct *work)
+{
+	struct cx23885_dev *dev =
+			     container_of(work, struct cx23885_dev, ir_rx_work);
+	u32 events = 0;
+	unsigned long *notifications = &dev->ir_rx_notifications;
+
+	if (test_and_clear_bit(CX23885_IR_RX_SW_FIFO_OVERRUN, notifications))
+		events |= V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN;
+	if (test_and_clear_bit(CX23885_IR_RX_HW_FIFO_OVERRUN, notifications))
+		events |= V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN;
+	if (test_and_clear_bit(CX23885_IR_RX_END_OF_RX_DETECTED, notifications))
+		events |= V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED;
+	if (test_and_clear_bit(CX23885_IR_RX_FIFO_SERVICE_REQ, notifications))
+		events |= V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ;
+
+	if (events == 0)
+		return;
+
+	if (dev->kernel_ir)
+		cx23885_input_rx_work_handler(dev, events);
+}
+
+void cx23885_ir_tx_work_handler(struct work_struct *work)
+{
+	struct cx23885_dev *dev =
+			     container_of(work, struct cx23885_dev, ir_tx_work);
+	u32 events = 0;
+	unsigned long *notifications = &dev->ir_tx_notifications;
+
+	if (test_and_clear_bit(CX23885_IR_TX_FIFO_SERVICE_REQ, notifications))
+		events |= V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ;
+
+	if (events == 0)
+		return;
+
+}
+
+/* Possibly called in an IRQ context */
+void cx23885_ir_rx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events)
+{
+	struct cx23885_dev *dev = to_cx23885(sd->v4l2_dev);
+	unsigned long *notifications = &dev->ir_rx_notifications;
+
+	if (events & V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ)
+		set_bit(CX23885_IR_RX_FIFO_SERVICE_REQ, notifications);
+	if (events & V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED)
+		set_bit(CX23885_IR_RX_END_OF_RX_DETECTED, notifications);
+	if (events & V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN)
+		set_bit(CX23885_IR_RX_HW_FIFO_OVERRUN, notifications);
+	if (events & V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN)
+		set_bit(CX23885_IR_RX_SW_FIFO_OVERRUN, notifications);
+
+	/*
+	 * For the integrated AV core, we are already in a workqueue context.
+	 * For the CX23888 integrated IR, we are in an interrupt context.
+	 */
+	if (sd == dev->sd_cx25840)
+		cx23885_ir_rx_work_handler(&dev->ir_rx_work);
+	else
+		schedule_work(&dev->ir_rx_work);
+}
+
+/* Possibly called in an IRQ context */
+void cx23885_ir_tx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events)
+{
+	struct cx23885_dev *dev = to_cx23885(sd->v4l2_dev);
+	unsigned long *notifications = &dev->ir_tx_notifications;
+
+	if (events & V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ)
+		set_bit(CX23885_IR_TX_FIFO_SERVICE_REQ, notifications);
+
+	/*
+	 * For the integrated AV core, we are already in a workqueue context.
+	 * For the CX23888 integrated IR, we are in an interrupt context.
+	 */
+	if (sd == dev->sd_cx25840)
+		cx23885_ir_tx_work_handler(&dev->ir_tx_work);
+	else
+		schedule_work(&dev->ir_tx_work);
+}
diff --git a/drivers/media/pci/cx23885/cx23885-ir.h b/drivers/media/pci/cx23885/cx23885-ir.h
new file mode 100644
index 0000000..0c9d8bd
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-ir.h
@@ -0,0 +1,31 @@
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  Infrared device support routines - non-input, non-vl42_subdev routines
+ *
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ */
+
+#ifndef _CX23885_IR_H_
+#define _CX23885_IR_H_
+void cx23885_ir_rx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events);
+void cx23885_ir_tx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events);
+
+void cx23885_ir_rx_work_handler(struct work_struct *work);
+void cx23885_ir_tx_work_handler(struct work_struct *work);
+#endif
diff --git a/drivers/media/pci/cx23885/cx23885-reg.h b/drivers/media/pci/cx23885/cx23885-reg.h
new file mode 100644
index 0000000..a99936e
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-reg.h
@@ -0,0 +1,452 @@
+/*
+ *  Driver for the Conexant CX23885 PCIe bridge
+ *
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _CX23885_REG_H_
+#define _CX23885_REG_H_
+
+/*
+Address Map
+0x00000000 -> 0x00009000   TX SRAM  (Fifos)
+0x00010000 -> 0x00013c00   RX SRAM  CMDS + CDT
+
+EACH CMDS struct is 0x80 bytes long
+
+DMAx_PTR1 = 0x03040 address of first cluster
+DMAx_PTR2 = 0x10600 address of the CDT
+DMAx_CNT1 = cluster size in (bytes >> 4) -1
+DMAx_CNT2 = total cdt size for all entries >> 3
+
+Cluster Descriptor entry = 4 DWORDS
+ DWORD 0 -> ptr to cluster
+ DWORD 1 Reserved
+ DWORD 2 Reserved
+ DWORD 3 Reserved
+
+Channel manager Data Structure entry = 20 DWORD
+  0  IntialProgramCounterLow
+  1  IntialProgramCounterHigh
+  2  ClusterDescriptorTableBase
+  3  ClusterDescriptorTableSize
+  4  InstructionQueueBase
+  5  InstructionQueueSize
+...  Reserved
+ 19  Reserved
+*/
+
+/* Risc Instructions */
+#define RISC_CNT_INC		 0x00010000
+#define RISC_CNT_RESET		 0x00030000
+#define RISC_IRQ1		 0x01000000
+#define RISC_IRQ2		 0x02000000
+#define RISC_EOL		 0x04000000
+#define RISC_SOL		 0x08000000
+#define RISC_WRITE		 0x10000000
+#define RISC_SKIP		 0x20000000
+#define RISC_JUMP		 0x70000000
+#define RISC_SYNC		 0x80000000
+#define RISC_RESYNC		 0x80008000
+#define RISC_READ		 0x90000000
+#define RISC_WRITERM		 0xB0000000
+#define RISC_WRITECM		 0xC0000000
+#define RISC_WRITECR		 0xD0000000
+#define RISC_WRITEC		 0x50000000
+#define RISC_READC		 0xA0000000
+
+
+/* Audio and Video Core */
+#define HOST_REG1		0x00000000
+#define HOST_REG2		0x00000001
+#define HOST_REG3		0x00000002
+
+/* Chip Configuration Registers */
+#define CHIP_CTRL		0x00000100
+#define AFE_CTRL		0x00000104
+#define VID_PLL_INT_POST	0x00000108
+#define VID_PLL_FRAC		0x0000010C
+#define AUX_PLL_INT_POST	0x00000110
+#define AUX_PLL_FRAC		0x00000114
+#define SYS_PLL_INT_POST	0x00000118
+#define SYS_PLL_FRAC		0x0000011C
+#define PIN_CTRL		0x00000120
+#define AUD_IO_CTRL		0x00000124
+#define AUD_LOCK1		0x00000128
+#define AUD_LOCK2		0x0000012C
+#define POWER_CTRL		0x00000130
+#define AFE_DIAG_CTRL1		0x00000134
+#define AFE_DIAG_CTRL3		0x0000013C
+#define PLL_DIAG_CTRL		0x00000140
+#define AFE_CLK_OUT_CTRL	0x00000144
+#define DLL1_DIAG_CTRL		0x0000015C
+
+/* GPIO[23:19] Output Enable */
+#define GPIO2_OUT_EN_REG	0x00000160
+/* GPIO[23:19] Data Registers */
+#define GPIO2			0x00000164
+
+#define IFADC_CTRL		0x00000180
+
+/* Infrared Remote Registers */
+#define IR_CNTRL_REG	0x00000200
+#define IR_TXCLK_REG	0x00000204
+#define IR_RXCLK_REG	0x00000208
+#define IR_CDUTY_REG	0x0000020C
+#define IR_STAT_REG	0x00000210
+#define IR_IRQEN_REG	0x00000214
+#define IR_FILTR_REG	0x00000218
+#define IR_FIFO_REG	0x0000023C
+
+/* Video Decoder Registers */
+#define MODE_CTRL		0x00000400
+#define OUT_CTRL1		0x00000404
+#define OUT_CTRL2		0x00000408
+#define GEN_STAT		0x0000040C
+#define INT_STAT_MASK		0x00000410
+#define LUMA_CTRL		0x00000414
+#define HSCALE_CTRL		0x00000418
+#define VSCALE_CTRL		0x0000041C
+#define CHROMA_CTRL		0x00000420
+#define VBI_LINE_CTRL1		0x00000424
+#define VBI_LINE_CTRL2		0x00000428
+#define VBI_LINE_CTRL3		0x0000042C
+#define VBI_LINE_CTRL4		0x00000430
+#define VBI_LINE_CTRL5		0x00000434
+#define VBI_FC_CFG		0x00000438
+#define VBI_MISC_CFG1		0x0000043C
+#define VBI_MISC_CFG2		0x00000440
+#define VBI_PAY1		0x00000444
+#define VBI_PAY2		0x00000448
+#define VBI_CUST1_CFG1		0x0000044C
+#define VBI_CUST1_CFG2		0x00000450
+#define VBI_CUST1_CFG3		0x00000454
+#define VBI_CUST2_CFG1		0x00000458
+#define VBI_CUST2_CFG2		0x0000045C
+#define VBI_CUST2_CFG3		0x00000460
+#define VBI_CUST3_CFG1		0x00000464
+#define VBI_CUST3_CFG2		0x00000468
+#define VBI_CUST3_CFG3		0x0000046C
+#define HORIZ_TIM_CTRL		0x00000470
+#define VERT_TIM_CTRL		0x00000474
+#define SRC_COMB_CFG		0x00000478
+#define CHROMA_VBIOFF_CFG	0x0000047C
+#define FIELD_COUNT		0x00000480
+#define MISC_TIM_CTRL		0x00000484
+#define DFE_CTRL1		0x00000488
+#define DFE_CTRL2		0x0000048C
+#define DFE_CTRL3		0x00000490
+#define PLL_CTRL		0x00000494
+#define HTL_CTRL		0x00000498
+#define COMB_CTRL		0x0000049C
+#define CRUSH_CTRL		0x000004A0
+#define SOFT_RST_CTRL		0x000004A4
+#define CX885_VERSION		0x000004B4
+#define VBI_PASS_CTRL		0x000004BC
+
+/* Audio Decoder Registers */
+/* 8051 Configuration */
+#define DL_CTL		0x00000800
+#define STD_DET_STATUS	0x00000804
+#define STD_DET_CTL	0x00000808
+#define DW8051_INT	0x0000080C
+#define GENERAL_CTL	0x00000810
+#define AAGC_CTL	0x00000814
+#define DEMATRIX_CTL	0x000008CC
+#define PATH1_CTL1	0x000008D0
+#define PATH1_VOL_CTL	0x000008D4
+#define PATH1_EQ_CTL	0x000008D8
+#define PATH1_SC_CTL	0x000008DC
+#define PATH2_CTL1	0x000008E0
+#define PATH2_VOL_CTL	0x000008E4
+#define PATH2_EQ_CTL	0x000008E8
+#define PATH2_SC_CTL	0x000008EC
+
+/* Sample Rate Converter */
+#define SRC_CTL		0x000008F0
+#define SRC_LF_COEF	0x000008F4
+#define SRC1_CTL	0x000008F8
+#define SRC2_CTL	0x000008FC
+#define SRC3_CTL	0x00000900
+#define SRC4_CTL	0x00000904
+#define SRC5_CTL	0x00000908
+#define SRC6_CTL	0x0000090C
+#define BAND_OUT_SEL	0x00000910
+#define I2S_N_CTL	0x00000914
+#define I2S_OUT_CTL	0x00000918
+#define AUTOCONFIG_REG	0x000009C4
+
+/* Audio ADC Registers */
+#define DSM_CTRL1	0x00000000
+#define DSM_CTRL2	0x00000001
+#define CHP_EN_CTRL	0x00000002
+#define CHP_CLK_CTRL1	0x00000004
+#define CHP_CLK_CTRL2	0x00000005
+#define BG_REF_CTRL	0x00000006
+#define SD2_SW_CTRL1	0x00000008
+#define SD2_SW_CTRL2	0x00000009
+#define SD2_BIAS_CTRL	0x0000000A
+#define AMP_BIAS_CTRL	0x0000000C
+#define CH_PWR_CTRL1	0x0000000E
+#define FLD_CH_SEL      (1 << 3)
+#define CH_PWR_CTRL2	0x0000000F
+#define DSM_STATUS1	0x00000010
+#define DSM_STATUS2	0x00000011
+#define DIG_CTL1	0x00000012
+#define DIG_CTL2	0x00000013
+#define I2S_TX_CFG	0x0000001A
+
+#define DEV_CNTRL2	0x00040000
+
+#define PCI_MSK_IR        (1 << 28)
+#define PCI_MSK_AV_CORE   (1 << 27)
+#define PCI_MSK_GPIO1     (1 << 24)
+#define PCI_MSK_GPIO0     (1 << 23)
+#define PCI_MSK_APB_DMA   (1 << 12)
+#define PCI_MSK_AL_WR     (1 << 11)
+#define PCI_MSK_AL_RD     (1 << 10)
+#define PCI_MSK_RISC_WR   (1 <<  9)
+#define PCI_MSK_RISC_RD   (1 <<  8)
+#define PCI_MSK_AUD_EXT   (1 <<  4)
+#define PCI_MSK_AUD_INT   (1 <<  3)
+#define PCI_MSK_VID_C     (1 <<  2)
+#define PCI_MSK_VID_B     (1 <<  1)
+#define PCI_MSK_VID_A      1
+#define PCI_INT_MSK	0x00040010
+
+#define PCI_INT_STAT	0x00040014
+#define PCI_INT_MSTAT	0x00040018
+
+#define VID_A_INT_MSK	0x00040020
+#define VID_A_INT_STAT	0x00040024
+#define VID_A_INT_MSTAT	0x00040028
+#define VID_A_INT_SSTAT	0x0004002C
+
+#define VID_B_INT_MSK	0x00040030
+#define VID_B_MSK_BAD_PKT     (1 << 20)
+#define VID_B_MSK_VBI_OPC_ERR (1 << 17)
+#define VID_B_MSK_OPC_ERR     (1 << 16)
+#define VID_B_MSK_VBI_SYNC    (1 << 13)
+#define VID_B_MSK_SYNC        (1 << 12)
+#define VID_B_MSK_VBI_OF      (1 <<  9)
+#define VID_B_MSK_OF          (1 <<  8)
+#define VID_B_MSK_VBI_RISCI2  (1 <<  5)
+#define VID_B_MSK_RISCI2      (1 <<  4)
+#define VID_B_MSK_VBI_RISCI1  (1 <<  1)
+#define VID_B_MSK_RISCI1       1
+#define VID_B_INT_STAT	0x00040034
+#define VID_B_INT_MSTAT	0x00040038
+#define VID_B_INT_SSTAT	0x0004003C
+
+#define VID_B_MSK_BAD_PKT (1 << 20)
+#define VID_B_MSK_OPC_ERR (1 << 16)
+#define VID_B_MSK_SYNC    (1 << 12)
+#define VID_B_MSK_OF      (1 <<  8)
+#define VID_B_MSK_RISCI2  (1 <<  4)
+#define VID_B_MSK_RISCI1   1
+
+#define VID_C_MSK_BAD_PKT (1 << 20)
+#define VID_C_MSK_OPC_ERR (1 << 16)
+#define VID_C_MSK_SYNC    (1 << 12)
+#define VID_C_MSK_OF      (1 <<  8)
+#define VID_C_MSK_RISCI2  (1 <<  4)
+#define VID_C_MSK_RISCI1   1
+
+/* A superset for testing purposes */
+#define VID_BC_MSK_BAD_PKT (1 << 20)
+#define VID_BC_MSK_OPC_ERR (1 << 16)
+#define VID_BC_MSK_SYNC    (1 << 12)
+#define VID_BC_MSK_OF      (1 <<  8)
+#define VID_BC_MSK_VBI_RISCI2 (1 <<  5)
+#define VID_BC_MSK_RISCI2  (1 <<  4)
+#define VID_BC_MSK_VBI_RISCI1 (1 <<  1)
+#define VID_BC_MSK_RISCI1   1
+
+#define VID_C_INT_MSK	0x00040040
+#define VID_C_INT_STAT	0x00040044
+#define VID_C_INT_MSTAT	0x00040048
+#define VID_C_INT_SSTAT	0x0004004C
+
+#define AUDIO_INT_INT_MSK	0x00040050
+#define AUDIO_INT_INT_STAT	0x00040054
+#define AUDIO_INT_INT_MSTAT	0x00040058
+#define AUDIO_INT_INT_SSTAT	0x0004005C
+
+#define AUDIO_EXT_INT_MSK	0x00040060
+#define AUDIO_EXT_INT_STAT	0x00040064
+#define AUDIO_EXT_INT_MSTAT	0x00040068
+#define AUDIO_EXT_INT_SSTAT	0x0004006C
+
+#define RDR_CFG0	0x00050000
+#define RDR_CFG1	0x00050004
+#define RDR_CFG2	0x00050008
+#define RDR_RDRCTL1	0x0005030c
+#define RDR_TLCTL0	0x00050318
+
+/* APB DMAC Current Buffer Pointer */
+#define DMA1_PTR1	0x00100000
+#define DMA2_PTR1	0x00100004
+#define DMA3_PTR1	0x00100008
+#define DMA4_PTR1	0x0010000C
+#define DMA5_PTR1	0x00100010
+#define DMA6_PTR1	0x00100014
+#define DMA7_PTR1	0x00100018
+#define DMA8_PTR1	0x0010001C
+
+/* APB DMAC Current Table Pointer */
+#define DMA1_PTR2	0x00100040
+#define DMA2_PTR2	0x00100044
+#define DMA3_PTR2	0x00100048
+#define DMA4_PTR2	0x0010004C
+#define DMA5_PTR2	0x00100050
+#define DMA6_PTR2	0x00100054
+#define DMA7_PTR2	0x00100058
+#define DMA8_PTR2	0x0010005C
+
+/* APB DMAC Buffer Limit */
+#define DMA1_CNT1	0x00100080
+#define DMA2_CNT1	0x00100084
+#define DMA3_CNT1	0x00100088
+#define DMA4_CNT1	0x0010008C
+#define DMA5_CNT1	0x00100090
+#define DMA6_CNT1	0x00100094
+#define DMA7_CNT1	0x00100098
+#define DMA8_CNT1	0x0010009C
+
+/* APB DMAC Table Size */
+#define DMA1_CNT2	0x001000C0
+#define DMA2_CNT2	0x001000C4
+#define DMA3_CNT2	0x001000C8
+#define DMA4_CNT2	0x001000CC
+#define DMA5_CNT2	0x001000D0
+#define DMA6_CNT2	0x001000D4
+#define DMA7_CNT2	0x001000D8
+#define DMA8_CNT2	0x001000DC
+
+/* Timer Counters */
+#define TM_CNT_LDW	0x00110000
+#define TM_CNT_UW	0x00110004
+#define TM_LMT_LDW	0x00110008
+#define TM_LMT_UW	0x0011000C
+
+/* GPIO */
+#define GP0_IO		0x00110010
+#define GPIO_ISM	0x00110014
+#define SOFT_RESET	0x0011001C
+
+/* GPIO (417 Microsoftcontroller) RW Data */
+#define MC417_RWD	0x00110020
+
+/* GPIO (417 Microsoftcontroller) Output Enable, Low Active */
+#define MC417_OEN	0x00110024
+#define MC417_CTL	0x00110028
+#define ALT_PIN_OUT_SEL 0x0011002C
+#define CLK_DELAY	0x00110048
+#define PAD_CTRL	0x0011004C
+
+/* Video A Interface */
+#define VID_A_GPCNT		0x00130020
+#define VBI_A_GPCNT		0x00130024
+#define VID_A_GPCNT_CTL		0x00130030
+#define VBI_A_GPCNT_CTL		0x00130034
+#define VID_A_DMA_CTL		0x00130040
+#define VID_A_VIP_CTRL		0x00130080
+#define VID_A_PIXEL_FRMT	0x00130084
+#define VID_A_VBI_CTRL		0x00130088
+
+/* Video B Interface */
+#define VID_B_DMA		0x00130100
+#define VBI_B_DMA		0x00130108
+#define VID_B_GPCNT		0x00130120
+#define VBI_B_GPCNT		0x00130124
+#define VID_B_GPCNT_CTL		0x00130134
+#define VBI_B_GPCNT_CTL		0x00130138
+#define VID_B_DMA_CTL		0x00130140
+#define VID_B_SRC_SEL		0x00130144
+#define VID_B_LNGTH		0x00130150
+#define VID_B_HW_SOP_CTL	0x00130154
+#define VID_B_GEN_CTL		0x00130158
+#define VID_B_BD_PKT_STATUS	0x0013015C
+#define VID_B_SOP_STATUS	0x00130160
+#define VID_B_FIFO_OVFL_STAT	0x00130164
+#define VID_B_VLD_MISC		0x00130168
+#define VID_B_TS_CLK_EN		0x0013016C
+#define VID_B_VIP_CTRL		0x00130180
+#define VID_B_PIXEL_FRMT	0x00130184
+
+/* Video C Interface */
+#define VID_C_GPCNT		0x00130220
+#define VID_C_GPCNT_CTL		0x00130230
+#define VBI_C_GPCNT_CTL		0x00130234
+#define VID_C_DMA_CTL		0x00130240
+#define VID_C_LNGTH		0x00130250
+#define VID_C_HW_SOP_CTL	0x00130254
+#define VID_C_GEN_CTL		0x00130258
+#define VID_C_BD_PKT_STATUS	0x0013025C
+#define VID_C_SOP_STATUS	0x00130260
+#define VID_C_FIFO_OVFL_STAT	0x00130264
+#define VID_C_VLD_MISC		0x00130268
+#define VID_C_TS_CLK_EN		0x0013026C
+
+/* Internal Audio Interface */
+#define AUD_INT_A_GPCNT		0x00140020
+#define AUD_INT_B_GPCNT		0x00140024
+#define AUD_INT_A_GPCNT_CTL	0x00140030
+#define AUD_INT_B_GPCNT_CTL	0x00140034
+#define AUD_INT_DMA_CTL		0x00140040
+#define AUD_INT_A_LNGTH		0x00140050
+#define AUD_INT_B_LNGTH		0x00140054
+#define AUD_INT_A_MODE		0x00140058
+#define AUD_INT_B_MODE		0x0014005C
+
+/* External Audio Interface */
+#define AUD_EXT_DMA		0x00140100
+#define AUD_EXT_GPCNT		0x00140120
+#define AUD_EXT_GPCNT_CTL	0x00140130
+#define AUD_EXT_DMA_CTL		0x00140140
+#define AUD_EXT_LNGTH		0x00140150
+#define AUD_EXT_A_MODE		0x00140158
+
+/* I2C Bus 1 */
+#define I2C1_ADDR	0x00180000
+#define I2C1_WDATA	0x00180004
+#define I2C1_CTRL	0x00180008
+#define I2C1_RDATA	0x0018000C
+#define I2C1_STAT	0x00180010
+
+/* I2C Bus 2 */
+#define I2C2_ADDR	0x00190000
+#define I2C2_WDATA	0x00190004
+#define I2C2_CTRL	0x00190008
+#define I2C2_RDATA	0x0019000C
+#define I2C2_STAT	0x00190010
+
+/* I2C Bus 3 */
+#define I2C3_ADDR	0x001A0000
+#define I2C3_WDATA	0x001A0004
+#define I2C3_CTRL	0x001A0008
+#define I2C3_RDATA	0x001A000C
+#define I2C3_STAT	0x001A0010
+
+/* UART */
+#define UART_CTL	0x001B0000
+#define UART_BRD	0x001B0004
+#define UART_ISR	0x001B000C
+#define UART_CNT	0x001B0010
+
+#endif /* _CX23885_REG_H_ */
diff --git a/drivers/media/pci/cx23885/cx23885-vbi.c b/drivers/media/pci/cx23885/cx23885-vbi.c
new file mode 100644
index 0000000..a1154f0
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-vbi.c
@@ -0,0 +1,295 @@
+/*
+ *  Driver for the Conexant CX23885 PCIe bridge
+ *
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+
+#include "cx23885.h"
+
+static unsigned int vbibufs = 4;
+module_param(vbibufs, int, 0644);
+MODULE_PARM_DESC(vbibufs, "number of vbi buffers, range 2-32");
+
+static unsigned int vbi_debug;
+module_param(vbi_debug, int, 0644);
+MODULE_PARM_DESC(vbi_debug, "enable debug messages [vbi]");
+
+#define dprintk(level, fmt, arg...)\
+	do { if (vbi_debug >= level)\
+		printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\
+	} while (0)
+
+/* ------------------------------------------------------------------ */
+
+#define VBI_LINE_LENGTH 1440
+#define NTSC_VBI_START_LINE 10        /* line 10 - 21 */
+#define NTSC_VBI_END_LINE   21
+#define NTSC_VBI_LINES      (NTSC_VBI_END_LINE - NTSC_VBI_START_LINE + 1)
+
+
+int cx23885_vbi_fmt(struct file *file, void *priv,
+	struct v4l2_format *f)
+{
+	struct cx23885_fh *fh = priv;
+	struct cx23885_dev *dev = fh->dev;
+
+	if (dev->tvnorm & V4L2_STD_525_60) {
+		/* ntsc */
+		f->fmt.vbi.samples_per_line = VBI_LINE_LENGTH;
+		f->fmt.vbi.sampling_rate = 27000000;
+		f->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY;
+		f->fmt.vbi.offset = 0;
+		f->fmt.vbi.flags = 0;
+		f->fmt.vbi.start[0] = 10;
+		f->fmt.vbi.count[0] = 17;
+		f->fmt.vbi.start[1] = 263 + 10 + 1;
+		f->fmt.vbi.count[1] = 17;
+	} else if (dev->tvnorm & V4L2_STD_625_50) {
+		/* pal */
+		f->fmt.vbi.sampling_rate = 35468950;
+		f->fmt.vbi.start[0] = 7 - 1;
+		f->fmt.vbi.start[1] = 319 - 1;
+	}
+
+	return 0;
+}
+
+/* We're given the Video Interrupt status register.
+ * The cx23885_video_irq() func has already validated
+ * the potential error bits, we just need to
+ * deal with vbi payload and return indication if
+ * we actually processed any payload.
+ */
+int cx23885_vbi_irq(struct cx23885_dev *dev, u32 status)
+{
+	u32 count;
+	int handled = 0;
+
+	if (status & VID_BC_MSK_VBI_RISCI1) {
+		dprintk(1, "%s() VID_BC_MSK_VBI_RISCI1\n", __func__);
+		spin_lock(&dev->slock);
+		count = cx_read(VID_A_GPCNT);
+		cx23885_video_wakeup(dev, &dev->vbiq, count);
+		spin_unlock(&dev->slock);
+		handled++;
+	}
+
+	if (status & VID_BC_MSK_VBI_RISCI2) {
+		dprintk(1, "%s() VID_BC_MSK_VBI_RISCI2\n", __func__);
+		dprintk(2, "stopper vbi\n");
+		spin_lock(&dev->slock);
+		cx23885_restart_vbi_queue(dev, &dev->vbiq);
+		spin_unlock(&dev->slock);
+		handled++;
+	}
+
+	return handled;
+}
+
+static int cx23885_start_vbi_dma(struct cx23885_dev    *dev,
+			 struct cx23885_dmaqueue *q,
+			 struct cx23885_buffer   *buf)
+{
+	dprintk(1, "%s()\n", __func__);
+
+	/* setup fifo + format */
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH02],
+				buf->vb.width, buf->risc.dma);
+
+	/* reset counter */
+	cx_write(VID_A_GPCNT_CTL, 3);
+	cx_write(VID_A_VBI_CTRL, 3);
+	cx_write(VBI_A_GPCNT_CTL, 3);
+	q->count = 1;
+
+	/* enable irq */
+	cx23885_irq_add_enable(dev, 0x01);
+	cx_set(VID_A_INT_MSK, 0x000022);
+
+	/* start dma */
+	cx_set(DEV_CNTRL2, (1<<5));
+	cx_set(VID_A_DMA_CTL, 0x22); /* FIFO and RISC enable */
+
+	return 0;
+}
+
+
+int cx23885_restart_vbi_queue(struct cx23885_dev    *dev,
+			     struct cx23885_dmaqueue *q)
+{
+	struct cx23885_buffer *buf;
+	struct list_head *item;
+
+	if (list_empty(&q->active))
+		return 0;
+
+	buf = list_entry(q->active.next, struct cx23885_buffer, vb.queue);
+	dprintk(2, "restart_queue [%p/%d]: restart dma\n",
+		buf, buf->vb.i);
+	cx23885_start_vbi_dma(dev, q, buf);
+	list_for_each(item, &q->active) {
+		buf = list_entry(item, struct cx23885_buffer, vb.queue);
+		buf->count = q->count++;
+	}
+	mod_timer(&q->timeout, jiffies + (BUFFER_TIMEOUT / 30));
+	return 0;
+}
+
+void cx23885_vbi_timeout(unsigned long data)
+{
+	struct cx23885_dev *dev = (struct cx23885_dev *)data;
+	struct cx23885_dmaqueue *q = &dev->vbiq;
+	struct cx23885_buffer *buf;
+	unsigned long flags;
+
+	/* Stop the VBI engine */
+	cx_clear(VID_A_DMA_CTL, 0x22);
+
+	spin_lock_irqsave(&dev->slock, flags);
+	while (!list_empty(&q->active)) {
+		buf = list_entry(q->active.next, struct cx23885_buffer,
+			vb.queue);
+		list_del(&buf->vb.queue);
+		buf->vb.state = VIDEOBUF_ERROR;
+		wake_up(&buf->vb.done);
+		printk("%s/0: [%p/%d] timeout - dma=0x%08lx\n", dev->name,
+		       buf, buf->vb.i, (unsigned long)buf->risc.dma);
+	}
+	cx23885_restart_vbi_queue(dev, q);
+	spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+/* ------------------------------------------------------------------ */
+#define VBI_LINE_LENGTH 1440
+#define VBI_LINE_COUNT 17
+
+static int
+vbi_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size)
+{
+	*size = VBI_LINE_COUNT * VBI_LINE_LENGTH * 2;
+	if (0 == *count)
+		*count = vbibufs;
+	if (*count < 2)
+		*count = 2;
+	if (*count > 32)
+		*count = 32;
+	return 0;
+}
+
+static int
+vbi_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
+	    enum v4l2_field field)
+{
+	struct cx23885_fh *fh  = q->priv_data;
+	struct cx23885_dev *dev = fh->dev;
+	struct cx23885_buffer *buf = container_of(vb,
+		struct cx23885_buffer, vb);
+	struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb);
+	unsigned int size;
+	int rc;
+
+	size = VBI_LINE_COUNT * VBI_LINE_LENGTH * 2;
+	if (0 != buf->vb.baddr  &&  buf->vb.bsize < size)
+		return -EINVAL;
+
+	if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
+		buf->vb.width  = VBI_LINE_LENGTH;
+		buf->vb.height = VBI_LINE_COUNT;
+		buf->vb.size   = size;
+		buf->vb.field  = V4L2_FIELD_SEQ_TB;
+
+		rc = videobuf_iolock(q, &buf->vb, NULL);
+		if (0 != rc)
+			goto fail;
+		cx23885_risc_vbibuffer(dev->pci, &buf->risc,
+				 dma->sglist,
+				 0, buf->vb.width * buf->vb.height,
+				 buf->vb.width, 0,
+				 buf->vb.height);
+	}
+	buf->vb.state = VIDEOBUF_PREPARED;
+	return 0;
+
+ fail:
+	cx23885_free_buffer(q, buf);
+	return rc;
+}
+
+static void
+vbi_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
+{
+	struct cx23885_buffer   *buf =
+		container_of(vb, struct cx23885_buffer, vb);
+	struct cx23885_buffer   *prev;
+	struct cx23885_fh       *fh   = vq->priv_data;
+	struct cx23885_dev      *dev  = fh->dev;
+	struct cx23885_dmaqueue *q    = &dev->vbiq;
+
+	/* add jump to stopper */
+	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
+	buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma);
+	buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */
+
+	if (list_empty(&q->active)) {
+		list_add_tail(&buf->vb.queue, &q->active);
+		cx23885_start_vbi_dma(dev, q, buf);
+		buf->vb.state = VIDEOBUF_ACTIVE;
+		buf->count    = q->count++;
+		mod_timer(&q->timeout, jiffies + (BUFFER_TIMEOUT / 30));
+		dprintk(2, "[%p/%d] vbi_queue - first active\n",
+			buf, buf->vb.i);
+
+	} else {
+		prev = list_entry(q->active.prev, struct cx23885_buffer,
+			vb.queue);
+		list_add_tail(&buf->vb.queue, &q->active);
+		buf->vb.state = VIDEOBUF_ACTIVE;
+		buf->count    = q->count++;
+		prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
+		prev->risc.jmp[2] = cpu_to_le32(0); /* Bits 63-32 */
+		dprintk(2, "[%p/%d] buffer_queue - append to active\n",
+			buf, buf->vb.i);
+	}
+}
+
+static void vbi_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+	struct cx23885_buffer *buf =
+		container_of(vb, struct cx23885_buffer, vb);
+
+	cx23885_free_buffer(q, buf);
+}
+
+struct videobuf_queue_ops cx23885_vbi_qops = {
+	.buf_setup    = vbi_setup,
+	.buf_prepare  = vbi_prepare,
+	.buf_queue    = vbi_queue,
+	.buf_release  = vbi_release,
+};
+
+/* ------------------------------------------------------------------ */
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/pci/cx23885/cx23885-video.c b/drivers/media/pci/cx23885/cx23885-video.c
new file mode 100644
index 0000000..8c4a9a5
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885-video.c
@@ -0,0 +1,1926 @@
+/*
+ *  Driver for the Conexant CX23885 PCIe bridge
+ *
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kmod.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <asm/div64.h>
+
+#include "cx23885.h"
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include "cx23885-ioctl.h"
+#include "tuner-xc2028.h"
+
+#include <media/cx25840.h>
+
+MODULE_DESCRIPTION("v4l2 driver module for cx23885 based TV cards");
+MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
+MODULE_LICENSE("GPL");
+
+/* ------------------------------------------------------------------ */
+
+static unsigned int video_nr[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET };
+static unsigned int vbi_nr[]   = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET };
+static unsigned int radio_nr[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET };
+
+module_param_array(video_nr, int, NULL, 0444);
+module_param_array(vbi_nr,   int, NULL, 0444);
+module_param_array(radio_nr, int, NULL, 0444);
+
+MODULE_PARM_DESC(video_nr, "video device numbers");
+MODULE_PARM_DESC(vbi_nr, "vbi device numbers");
+MODULE_PARM_DESC(radio_nr, "radio device numbers");
+
+static unsigned int video_debug;
+module_param(video_debug, int, 0644);
+MODULE_PARM_DESC(video_debug, "enable debug messages [video]");
+
+static unsigned int irq_debug;
+module_param(irq_debug, int, 0644);
+MODULE_PARM_DESC(irq_debug, "enable debug messages [IRQ handler]");
+
+static unsigned int vid_limit = 16;
+module_param(vid_limit, int, 0644);
+MODULE_PARM_DESC(vid_limit, "capture memory limit in megabytes");
+
+#define dprintk(level, fmt, arg...)\
+	do { if (video_debug >= level)\
+		printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg);\
+	} while (0)
+
+/* ------------------------------------------------------------------- */
+/* static data                                                         */
+
+#define FORMAT_FLAGS_PACKED       0x01
+#if 0
+static struct cx23885_fmt formats[] = {
+	{
+		.name     = "8 bpp, gray",
+		.fourcc   = V4L2_PIX_FMT_GREY,
+		.depth    = 8,
+		.flags    = FORMAT_FLAGS_PACKED,
+	}, {
+		.name     = "15 bpp RGB, le",
+		.fourcc   = V4L2_PIX_FMT_RGB555,
+		.depth    = 16,
+		.flags    = FORMAT_FLAGS_PACKED,
+	}, {
+		.name     = "15 bpp RGB, be",
+		.fourcc   = V4L2_PIX_FMT_RGB555X,
+		.depth    = 16,
+		.flags    = FORMAT_FLAGS_PACKED,
+	}, {
+		.name     = "16 bpp RGB, le",
+		.fourcc   = V4L2_PIX_FMT_RGB565,
+		.depth    = 16,
+		.flags    = FORMAT_FLAGS_PACKED,
+	}, {
+		.name     = "16 bpp RGB, be",
+		.fourcc   = V4L2_PIX_FMT_RGB565X,
+		.depth    = 16,
+		.flags    = FORMAT_FLAGS_PACKED,
+	}, {
+		.name     = "24 bpp RGB, le",
+		.fourcc   = V4L2_PIX_FMT_BGR24,
+		.depth    = 24,
+		.flags    = FORMAT_FLAGS_PACKED,
+	}, {
+		.name     = "32 bpp RGB, le",
+		.fourcc   = V4L2_PIX_FMT_BGR32,
+		.depth    = 32,
+		.flags    = FORMAT_FLAGS_PACKED,
+	}, {
+		.name     = "32 bpp RGB, be",
+		.fourcc   = V4L2_PIX_FMT_RGB32,
+		.depth    = 32,
+		.flags    = FORMAT_FLAGS_PACKED,
+	}, {
+		.name     = "4:2:2, packed, YUYV",
+		.fourcc   = V4L2_PIX_FMT_YUYV,
+		.depth    = 16,
+		.flags    = FORMAT_FLAGS_PACKED,
+	}, {
+		.name     = "4:2:2, packed, UYVY",
+		.fourcc   = V4L2_PIX_FMT_UYVY,
+		.depth    = 16,
+		.flags    = FORMAT_FLAGS_PACKED,
+	},
+};
+#else
+static struct cx23885_fmt formats[] = {
+	{
+#if 0
+		.name     = "4:2:2, packed, UYVY",
+		.fourcc   = V4L2_PIX_FMT_UYVY,
+		.depth    = 16,
+		.flags    = FORMAT_FLAGS_PACKED,
+	}, {
+#endif
+		.name     = "4:2:2, packed, YUYV",
+		.fourcc   = V4L2_PIX_FMT_YUYV,
+		.depth    = 16,
+		.flags    = FORMAT_FLAGS_PACKED,
+	}
+};
+#endif
+
+static struct cx23885_fmt *format_by_fourcc(unsigned int fourcc)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(formats); i++)
+		if (formats[i].fourcc == fourcc)
+			return formats+i;
+
+	printk(KERN_ERR "%s(%c%c%c%c) NOT FOUND\n", __func__,
+		(fourcc & 0xff),
+		((fourcc >> 8) & 0xff),
+		((fourcc >> 16) & 0xff),
+		((fourcc >> 24) & 0xff)
+		);
+	return NULL;
+}
+
+/* ------------------------------------------------------------------- */
+
+static const struct v4l2_queryctrl no_ctl = {
+	.name  = "42",
+	.flags = V4L2_CTRL_FLAG_DISABLED,
+};
+
+static struct cx23885_ctrl cx23885_ctls[] = {
+	/* --- video --- */
+	{
+		.v = {
+			.id            = V4L2_CID_BRIGHTNESS,
+			.name          = "Brightness",
+			.minimum       = 0x00,
+			.maximum       = 0xff,
+			.step          = 1,
+			.default_value = 0x7f,
+			.type          = V4L2_CTRL_TYPE_INTEGER,
+		},
+		.off                   = 128,
+		.reg                   = LUMA_CTRL,
+		.mask                  = 0x00ff,
+		.shift                 = 0,
+	}, {
+		.v = {
+			.id            = V4L2_CID_CONTRAST,
+			.name          = "Contrast",
+			.minimum       = 0,
+			.maximum       = 0x7f,
+			.step          = 1,
+			.default_value = 0x3f,
+			.type          = V4L2_CTRL_TYPE_INTEGER,
+		},
+		.off                   = 0,
+		.reg                   = LUMA_CTRL,
+		.mask                  = 0xff00,
+		.shift                 = 8,
+	}, {
+		.v = {
+			.id            = V4L2_CID_HUE,
+			.name          = "Hue",
+			.minimum       = -127,
+			.maximum       = 128,
+			.step          = 1,
+			.default_value = 0x0,
+			.type          = V4L2_CTRL_TYPE_INTEGER,
+		},
+		.off                   = 128,
+		.reg                   = CHROMA_CTRL,
+		.mask                  = 0xff0000,
+		.shift                 = 16,
+	}, {
+		/* strictly, this only describes only U saturation.
+		 * V saturation is handled specially through code.
+		 */
+		.v = {
+			.id            = V4L2_CID_SATURATION,
+			.name          = "Saturation",
+			.minimum       = 0,
+			.maximum       = 0x7f,
+			.step          = 1,
+			.default_value = 0x3f,
+			.type          = V4L2_CTRL_TYPE_INTEGER,
+		},
+		.off                   = 0,
+		.reg                   = CHROMA_CTRL,
+		.mask                  = 0x00ff,
+		.shift                 = 0,
+	}, {
+	/* --- audio --- */
+		.v = {
+			.id            = V4L2_CID_AUDIO_MUTE,
+			.name          = "Mute",
+			.minimum       = 0,
+			.maximum       = 1,
+			.default_value = 1,
+			.type          = V4L2_CTRL_TYPE_BOOLEAN,
+		},
+		.reg                   = PATH1_CTL1,
+		.mask                  = (0x1f << 24),
+		.shift                 = 24,
+	}, {
+		.v = {
+			.id            = V4L2_CID_AUDIO_VOLUME,
+			.name          = "Volume",
+			.minimum       = 0,
+			.maximum       = 65535,
+			.step          = 65535 / 100,
+			.default_value = 65535,
+			.type          = V4L2_CTRL_TYPE_INTEGER,
+		},
+		.reg                   = PATH1_VOL_CTL,
+		.mask                  = 0xff,
+		.shift                 = 0,
+	}
+};
+static const int CX23885_CTLS = ARRAY_SIZE(cx23885_ctls);
+
+/* Must be sorted from low to high control ID! */
+static const u32 cx23885_user_ctrls[] = {
+	V4L2_CID_USER_CLASS,
+	V4L2_CID_BRIGHTNESS,
+	V4L2_CID_CONTRAST,
+	V4L2_CID_SATURATION,
+	V4L2_CID_HUE,
+	V4L2_CID_AUDIO_VOLUME,
+	V4L2_CID_AUDIO_MUTE,
+	0
+};
+
+static const u32 *ctrl_classes[] = {
+	cx23885_user_ctrls,
+	NULL
+};
+
+void cx23885_video_wakeup(struct cx23885_dev *dev,
+	struct cx23885_dmaqueue *q, u32 count)
+{
+	struct cx23885_buffer *buf;
+	int bc;
+
+	for (bc = 0;; bc++) {
+		if (list_empty(&q->active))
+			break;
+		buf = list_entry(q->active.next,
+				 struct cx23885_buffer, vb.queue);
+
+		/* count comes from the hw and is is 16bit wide --
+		 * this trick handles wrap-arounds correctly for
+		 * up to 32767 buffers in flight... */
+		if ((s16) (count - buf->count) < 0)
+			break;
+
+		do_gettimeofday(&buf->vb.ts);
+		dprintk(2, "[%p/%d] wakeup reg=%d buf=%d\n", buf, buf->vb.i,
+			count, buf->count);
+		buf->vb.state = VIDEOBUF_DONE;
+		list_del(&buf->vb.queue);
+		wake_up(&buf->vb.done);
+	}
+	if (list_empty(&q->active))
+		del_timer(&q->timeout);
+	else
+		mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
+	if (bc != 1)
+		printk(KERN_ERR "%s: %d buffers handled (should be 1)\n",
+			__func__, bc);
+}
+
+int cx23885_set_tvnorm(struct cx23885_dev *dev, v4l2_std_id norm)
+{
+	dprintk(1, "%s(norm = 0x%08x) name: [%s]\n",
+		__func__,
+		(unsigned int)norm,
+		v4l2_norm_to_name(norm));
+
+	dev->tvnorm = norm;
+
+	call_all(dev, core, s_std, norm);
+
+	return 0;
+}
+
+static struct video_device *cx23885_vdev_init(struct cx23885_dev *dev,
+				    struct pci_dev *pci,
+				    struct video_device *template,
+				    char *type)
+{
+	struct video_device *vfd;
+	dprintk(1, "%s()\n", __func__);
+
+	vfd = video_device_alloc();
+	if (NULL == vfd)
+		return NULL;
+	*vfd = *template;
+	vfd->v4l2_dev = &dev->v4l2_dev;
+	vfd->release = video_device_release;
+	snprintf(vfd->name, sizeof(vfd->name), "%s (%s)",
+		 cx23885_boards[dev->board].name, type);
+	video_set_drvdata(vfd, dev);
+	return vfd;
+}
+
+static int cx23885_ctrl_query(struct v4l2_queryctrl *qctrl)
+{
+	int i;
+
+	if (qctrl->id < V4L2_CID_BASE ||
+	    qctrl->id >= V4L2_CID_LASTP1)
+		return -EINVAL;
+	for (i = 0; i < CX23885_CTLS; i++)
+		if (cx23885_ctls[i].v.id == qctrl->id)
+			break;
+	if (i == CX23885_CTLS) {
+		*qctrl = no_ctl;
+		return 0;
+	}
+	*qctrl = cx23885_ctls[i].v;
+	return 0;
+}
+
+/* ------------------------------------------------------------------- */
+/* resource management                                                 */
+
+static int res_get(struct cx23885_dev *dev, struct cx23885_fh *fh,
+	unsigned int bit)
+{
+	dprintk(1, "%s()\n", __func__);
+	if (fh->resources & bit)
+		/* have it already allocated */
+		return 1;
+
+	/* is it free? */
+	mutex_lock(&dev->lock);
+	if (dev->resources & bit) {
+		/* no, someone else uses it */
+		mutex_unlock(&dev->lock);
+		return 0;
+	}
+	/* it's free, grab it */
+	fh->resources  |= bit;
+	dev->resources |= bit;
+	dprintk(1, "res: get %d\n", bit);
+	mutex_unlock(&dev->lock);
+	return 1;
+}
+
+static int res_check(struct cx23885_fh *fh, unsigned int bit)
+{
+	return fh->resources & bit;
+}
+
+static int res_locked(struct cx23885_dev *dev, unsigned int bit)
+{
+	return dev->resources & bit;
+}
+
+static void res_free(struct cx23885_dev *dev, struct cx23885_fh *fh,
+	unsigned int bits)
+{
+	BUG_ON((fh->resources & bits) != bits);
+	dprintk(1, "%s()\n", __func__);
+
+	mutex_lock(&dev->lock);
+	fh->resources  &= ~bits;
+	dev->resources &= ~bits;
+	dprintk(1, "res: put %d\n", bits);
+	mutex_unlock(&dev->lock);
+}
+
+static int cx23885_flatiron_write(struct cx23885_dev *dev, u8 reg, u8 data)
+{
+	/* 8 bit registers, 8 bit values */
+	u8 buf[] = { reg, data };
+
+	struct i2c_msg msg = { .addr = 0x98 >> 1,
+		.flags = 0, .buf = buf, .len = 2 };
+
+	return i2c_transfer(&dev->i2c_bus[2].i2c_adap, &msg, 1);
+}
+
+static u8 cx23885_flatiron_read(struct cx23885_dev *dev, u8 reg)
+{
+	/* 8 bit registers, 8 bit values */
+	int ret;
+	u8 b0[] = { reg };
+	u8 b1[] = { 0 };
+
+	struct i2c_msg msg[] = {
+		{ .addr = 0x98 >> 1, .flags = 0, .buf = b0, .len = 1 },
+		{ .addr = 0x98 >> 1, .flags = I2C_M_RD, .buf = b1, .len = 1 }
+	};
+
+	ret = i2c_transfer(&dev->i2c_bus[2].i2c_adap, &msg[0], 2);
+	if (ret != 2)
+		printk(KERN_ERR "%s() error\n", __func__);
+
+	return b1[0];
+}
+
+static void cx23885_flatiron_dump(struct cx23885_dev *dev)
+{
+	int i;
+	dprintk(1, "Flatiron dump\n");
+	for (i = 0; i < 0x24; i++) {
+		dprintk(1, "FI[%02x] = %02x\n", i,
+			cx23885_flatiron_read(dev, i));
+	}
+}
+
+static int cx23885_flatiron_mux(struct cx23885_dev *dev, int input)
+{
+	u8 val;
+	dprintk(1, "%s(input = %d)\n", __func__, input);
+
+	if (input == 1)
+		val = cx23885_flatiron_read(dev, CH_PWR_CTRL1) & ~FLD_CH_SEL;
+	else if (input == 2)
+		val = cx23885_flatiron_read(dev, CH_PWR_CTRL1) | FLD_CH_SEL;
+	else
+		return -EINVAL;
+
+	val |= 0x20; /* Enable clock to delta-sigma and dec filter */
+
+	cx23885_flatiron_write(dev, CH_PWR_CTRL1, val);
+
+	/* Wake up */
+	cx23885_flatiron_write(dev, CH_PWR_CTRL2, 0);
+
+	if (video_debug)
+		cx23885_flatiron_dump(dev);
+
+	return 0;
+}
+
+static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input)
+{
+	dprintk(1, "%s() video_mux: %d [vmux=%d, gpio=0x%x,0x%x,0x%x,0x%x]\n",
+		__func__,
+		input, INPUT(input)->vmux,
+		INPUT(input)->gpio0, INPUT(input)->gpio1,
+		INPUT(input)->gpio2, INPUT(input)->gpio3);
+	dev->input = input;
+
+	if (dev->board == CX23885_BOARD_MYGICA_X8506 ||
+		dev->board == CX23885_BOARD_MAGICPRO_PROHDTVE2 ||
+		dev->board == CX23885_BOARD_MYGICA_X8507) {
+		/* Select Analog TV */
+		if (INPUT(input)->type == CX23885_VMUX_TELEVISION)
+			cx23885_gpio_clear(dev, GPIO_0);
+	}
+
+	/* Tell the internal A/V decoder */
+	v4l2_subdev_call(dev->sd_cx25840, video, s_routing,
+			INPUT(input)->vmux, 0, 0);
+
+	if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1800) ||
+		(dev->board == CX23885_BOARD_MPX885) ||
+		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1250) ||
+		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
+		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) ||
+		(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850)) {
+		/* Configure audio routing */
+		v4l2_subdev_call(dev->sd_cx25840, audio, s_routing,
+			INPUT(input)->amux, 0, 0);
+
+		if (INPUT(input)->amux == CX25840_AUDIO7)
+			cx23885_flatiron_mux(dev, 1);
+		else if (INPUT(input)->amux == CX25840_AUDIO6)
+			cx23885_flatiron_mux(dev, 2);
+	}
+
+	return 0;
+}
+
+static int cx23885_audio_mux(struct cx23885_dev *dev, unsigned int input)
+{
+	dprintk(1, "%s(input=%d)\n", __func__, input);
+
+	/* The baseband video core of the cx23885 has two audio inputs.
+	 * LR1 and LR2. In almost every single case so far only HVR1xxx
+	 * cards we've only ever supported LR1. Time to support LR2,
+	 * which is available via the optional white breakout header on
+	 * the board.
+	 * We'll use a could of existing enums in the card struct to allow
+	 * devs to specify which baseband input they need, or just default
+	 * to what we've always used.
+	 */
+	if (INPUT(input)->amux == CX25840_AUDIO7)
+		cx23885_flatiron_mux(dev, 1);
+	else if (INPUT(input)->amux == CX25840_AUDIO6)
+		cx23885_flatiron_mux(dev, 2);
+	else {
+		/* Not specifically defined, assume the default. */
+		cx23885_flatiron_mux(dev, 1);
+	}
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------ */
+static int cx23885_start_video_dma(struct cx23885_dev *dev,
+			   struct cx23885_dmaqueue *q,
+			   struct cx23885_buffer *buf)
+{
+	dprintk(1, "%s()\n", __func__);
+
+	/* Stop the dma/fifo before we tamper with it's risc programs */
+	cx_clear(VID_A_DMA_CTL, 0x11);
+
+	/* setup fifo + format */
+	cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH01],
+				buf->bpl, buf->risc.dma);
+
+	/* reset counter */
+	cx_write(VID_A_GPCNT_CTL, 3);
+	q->count = 1;
+
+	/* enable irq */
+	cx23885_irq_add_enable(dev, 0x01);
+	cx_set(VID_A_INT_MSK, 0x000011);
+
+	/* start dma */
+	cx_set(DEV_CNTRL2, (1<<5));
+	cx_set(VID_A_DMA_CTL, 0x11); /* FIFO and RISC enable */
+
+	return 0;
+}
+
+
+static int cx23885_restart_video_queue(struct cx23885_dev *dev,
+			       struct cx23885_dmaqueue *q)
+{
+	struct cx23885_buffer *buf, *prev;
+	struct list_head *item;
+	dprintk(1, "%s()\n", __func__);
+
+	if (!list_empty(&q->active)) {
+		buf = list_entry(q->active.next, struct cx23885_buffer,
+			vb.queue);
+		dprintk(2, "restart_queue [%p/%d]: restart dma\n",
+			buf, buf->vb.i);
+		cx23885_start_video_dma(dev, q, buf);
+		list_for_each(item, &q->active) {
+			buf = list_entry(item, struct cx23885_buffer,
+				vb.queue);
+			buf->count    = q->count++;
+		}
+		mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
+		return 0;
+	}
+
+	prev = NULL;
+	for (;;) {
+		if (list_empty(&q->queued))
+			return 0;
+		buf = list_entry(q->queued.next, struct cx23885_buffer,
+			vb.queue);
+		if (NULL == prev) {
+			list_move_tail(&buf->vb.queue, &q->active);
+			cx23885_start_video_dma(dev, q, buf);
+			buf->vb.state = VIDEOBUF_ACTIVE;
+			buf->count    = q->count++;
+			mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
+			dprintk(2, "[%p/%d] restart_queue - first active\n",
+				buf, buf->vb.i);
+
+		} else if (prev->vb.width  == buf->vb.width  &&
+			   prev->vb.height == buf->vb.height &&
+			   prev->fmt       == buf->fmt) {
+			list_move_tail(&buf->vb.queue, &q->active);
+			buf->vb.state = VIDEOBUF_ACTIVE;
+			buf->count    = q->count++;
+			prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
+			prev->risc.jmp[2] = cpu_to_le32(0); /* Bits 63 - 32 */
+			dprintk(2, "[%p/%d] restart_queue - move to active\n",
+				buf, buf->vb.i);
+		} else {
+			return 0;
+		}
+		prev = buf;
+	}
+}
+
+static int buffer_setup(struct videobuf_queue *q, unsigned int *count,
+	unsigned int *size)
+{
+	struct cx23885_fh *fh = q->priv_data;
+
+	*size = fh->fmt->depth*fh->width*fh->height >> 3;
+	if (0 == *count)
+		*count = 32;
+	if (*size * *count > vid_limit * 1024 * 1024)
+		*count = (vid_limit * 1024 * 1024) / *size;
+	return 0;
+}
+
+static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
+	       enum v4l2_field field)
+{
+	struct cx23885_fh *fh  = q->priv_data;
+	struct cx23885_dev *dev = fh->dev;
+	struct cx23885_buffer *buf =
+		container_of(vb, struct cx23885_buffer, vb);
+	int rc, init_buffer = 0;
+	u32 line0_offset, line1_offset;
+	struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb);
+	int field_tff;
+
+	BUG_ON(NULL == fh->fmt);
+	if (fh->width  < 48 || fh->width  > norm_maxw(dev->tvnorm) ||
+	    fh->height < 32 || fh->height > norm_maxh(dev->tvnorm))
+		return -EINVAL;
+	buf->vb.size = (fh->width * fh->height * fh->fmt->depth) >> 3;
+	if (0 != buf->vb.baddr  &&  buf->vb.bsize < buf->vb.size)
+		return -EINVAL;
+
+	if (buf->fmt       != fh->fmt    ||
+	    buf->vb.width  != fh->width  ||
+	    buf->vb.height != fh->height ||
+	    buf->vb.field  != field) {
+		buf->fmt       = fh->fmt;
+		buf->vb.width  = fh->width;
+		buf->vb.height = fh->height;
+		buf->vb.field  = field;
+		init_buffer = 1;
+	}
+
+	if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
+		init_buffer = 1;
+		rc = videobuf_iolock(q, &buf->vb, NULL);
+		if (0 != rc)
+			goto fail;
+	}
+
+	if (init_buffer) {
+		buf->bpl = buf->vb.width * buf->fmt->depth >> 3;
+		switch (buf->vb.field) {
+		case V4L2_FIELD_TOP:
+			cx23885_risc_buffer(dev->pci, &buf->risc,
+					 dma->sglist, 0, UNSET,
+					 buf->bpl, 0, buf->vb.height);
+			break;
+		case V4L2_FIELD_BOTTOM:
+			cx23885_risc_buffer(dev->pci, &buf->risc,
+					 dma->sglist, UNSET, 0,
+					 buf->bpl, 0, buf->vb.height);
+			break;
+		case V4L2_FIELD_INTERLACED:
+			if (dev->tvnorm & V4L2_STD_NTSC)
+				/* NTSC or  */
+				field_tff = 1;
+			else
+				field_tff = 0;
+
+			if (cx23885_boards[dev->board].force_bff)
+				/* PAL / SECAM OR 888 in NTSC MODE */
+				field_tff = 0;
+
+			if (field_tff) {
+				/* cx25840 transmits NTSC bottom field first */
+				dprintk(1, "%s() Creating TFF/NTSC risc\n",
+					__func__);
+				line0_offset = buf->bpl;
+				line1_offset = 0;
+			} else {
+				/* All other formats are top field first */
+				dprintk(1, "%s() Creating BFF/PAL/SECAM risc\n",
+					__func__);
+				line0_offset = 0;
+				line1_offset = buf->bpl;
+			}
+			cx23885_risc_buffer(dev->pci, &buf->risc,
+					dma->sglist, line0_offset,
+					line1_offset,
+					buf->bpl, buf->bpl,
+					buf->vb.height >> 1);
+			break;
+		case V4L2_FIELD_SEQ_TB:
+			cx23885_risc_buffer(dev->pci, &buf->risc,
+					 dma->sglist,
+					 0, buf->bpl * (buf->vb.height >> 1),
+					 buf->bpl, 0,
+					 buf->vb.height >> 1);
+			break;
+		case V4L2_FIELD_SEQ_BT:
+			cx23885_risc_buffer(dev->pci, &buf->risc,
+					 dma->sglist,
+					 buf->bpl * (buf->vb.height >> 1), 0,
+					 buf->bpl, 0,
+					 buf->vb.height >> 1);
+			break;
+		default:
+			BUG();
+		}
+	}
+	dprintk(2, "[%p/%d] buffer_prep - %dx%d %dbpp \"%s\" - dma=0x%08lx\n",
+		buf, buf->vb.i,
+		fh->width, fh->height, fh->fmt->depth, fh->fmt->name,
+		(unsigned long)buf->risc.dma);
+
+	buf->vb.state = VIDEOBUF_PREPARED;
+	return 0;
+
+ fail:
+	cx23885_free_buffer(q, buf);
+	return rc;
+}
+
+static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
+{
+	struct cx23885_buffer   *buf = container_of(vb,
+		struct cx23885_buffer, vb);
+	struct cx23885_buffer   *prev;
+	struct cx23885_fh       *fh   = vq->priv_data;
+	struct cx23885_dev      *dev  = fh->dev;
+	struct cx23885_dmaqueue *q    = &dev->vidq;
+
+	/* add jump to stopper */
+	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
+	buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma);
+	buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */
+
+	if (!list_empty(&q->queued)) {
+		list_add_tail(&buf->vb.queue, &q->queued);
+		buf->vb.state = VIDEOBUF_QUEUED;
+		dprintk(2, "[%p/%d] buffer_queue - append to queued\n",
+			buf, buf->vb.i);
+
+	} else if (list_empty(&q->active)) {
+		list_add_tail(&buf->vb.queue, &q->active);
+		cx23885_start_video_dma(dev, q, buf);
+		buf->vb.state = VIDEOBUF_ACTIVE;
+		buf->count    = q->count++;
+		mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT);
+		dprintk(2, "[%p/%d] buffer_queue - first active\n",
+			buf, buf->vb.i);
+
+	} else {
+		prev = list_entry(q->active.prev, struct cx23885_buffer,
+			vb.queue);
+		if (prev->vb.width  == buf->vb.width  &&
+		    prev->vb.height == buf->vb.height &&
+		    prev->fmt       == buf->fmt) {
+			list_add_tail(&buf->vb.queue, &q->active);
+			buf->vb.state = VIDEOBUF_ACTIVE;
+			buf->count    = q->count++;
+			prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
+			/* 64 bit bits 63-32 */
+			prev->risc.jmp[2] = cpu_to_le32(0);
+			dprintk(2, "[%p/%d] buffer_queue - append to active\n",
+				buf, buf->vb.i);
+
+		} else {
+			list_add_tail(&buf->vb.queue, &q->queued);
+			buf->vb.state = VIDEOBUF_QUEUED;
+			dprintk(2, "[%p/%d] buffer_queue - first queued\n",
+				buf, buf->vb.i);
+		}
+	}
+}
+
+static void buffer_release(struct videobuf_queue *q,
+	struct videobuf_buffer *vb)
+{
+	struct cx23885_buffer *buf = container_of(vb,
+		struct cx23885_buffer, vb);
+
+	cx23885_free_buffer(q, buf);
+}
+
+static struct videobuf_queue_ops cx23885_video_qops = {
+	.buf_setup    = buffer_setup,
+	.buf_prepare  = buffer_prepare,
+	.buf_queue    = buffer_queue,
+	.buf_release  = buffer_release,
+};
+
+static struct videobuf_queue *get_queue(struct cx23885_fh *fh)
+{
+	switch (fh->type) {
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+		return &fh->vidq;
+	case V4L2_BUF_TYPE_VBI_CAPTURE:
+		return &fh->vbiq;
+	default:
+		BUG();
+		return NULL;
+	}
+}
+
+static int get_resource(struct cx23885_fh *fh)
+{
+	switch (fh->type) {
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+		return RESOURCE_VIDEO;
+	case V4L2_BUF_TYPE_VBI_CAPTURE:
+		return RESOURCE_VBI;
+	default:
+		BUG();
+		return 0;
+	}
+}
+
+static int video_open(struct file *file)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct cx23885_dev *dev = video_drvdata(file);
+	struct cx23885_fh *fh;
+	enum v4l2_buf_type type = 0;
+	int radio = 0;
+
+	switch (vdev->vfl_type) {
+	case VFL_TYPE_GRABBER:
+		type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		break;
+	case VFL_TYPE_VBI:
+		type = V4L2_BUF_TYPE_VBI_CAPTURE;
+		break;
+	case VFL_TYPE_RADIO:
+		radio = 1;
+		break;
+	}
+
+	dprintk(1, "open dev=%s radio=%d type=%s\n",
+		video_device_node_name(vdev), radio, v4l2_type_names[type]);
+
+	/* allocate + initialize per filehandle data */
+	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
+	if (NULL == fh)
+		return -ENOMEM;
+
+	file->private_data = fh;
+	fh->dev      = dev;
+	fh->radio    = radio;
+	fh->type     = type;
+	fh->width    = 320;
+	fh->height   = 240;
+	fh->fmt      = format_by_fourcc(V4L2_PIX_FMT_YUYV);
+
+	videobuf_queue_sg_init(&fh->vidq, &cx23885_video_qops,
+			    &dev->pci->dev, &dev->slock,
+			    V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			    V4L2_FIELD_INTERLACED,
+			    sizeof(struct cx23885_buffer),
+			    fh, NULL);
+
+	videobuf_queue_sg_init(&fh->vbiq, &cx23885_vbi_qops,
+		&dev->pci->dev, &dev->slock,
+		V4L2_BUF_TYPE_VBI_CAPTURE,
+		V4L2_FIELD_SEQ_TB,
+		sizeof(struct cx23885_buffer),
+		fh, NULL);
+
+
+	dprintk(1, "post videobuf_queue_init()\n");
+
+	return 0;
+}
+
+static ssize_t video_read(struct file *file, char __user *data,
+	size_t count, loff_t *ppos)
+{
+	struct cx23885_fh *fh = file->private_data;
+
+	switch (fh->type) {
+	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+		if (res_locked(fh->dev, RESOURCE_VIDEO))
+			return -EBUSY;
+		return videobuf_read_one(&fh->vidq, data, count, ppos,
+					 file->f_flags & O_NONBLOCK);
+	case V4L2_BUF_TYPE_VBI_CAPTURE:
+		if (!res_get(fh->dev, fh, RESOURCE_VBI))
+			return -EBUSY;
+		return videobuf_read_stream(&fh->vbiq, data, count, ppos, 1,
+					    file->f_flags & O_NONBLOCK);
+	default:
+		BUG();
+		return 0;
+	}
+}
+
+static unsigned int video_poll(struct file *file,
+	struct poll_table_struct *wait)
+{
+	struct cx23885_fh *fh = file->private_data;
+	struct cx23885_buffer *buf;
+	unsigned int rc = POLLERR;
+
+	if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) {
+		if (!res_get(fh->dev, fh, RESOURCE_VBI))
+			return POLLERR;
+		return videobuf_poll_stream(file, &fh->vbiq, wait);
+	}
+
+	mutex_lock(&fh->vidq.vb_lock);
+	if (res_check(fh, RESOURCE_VIDEO)) {
+		/* streaming capture */
+		if (list_empty(&fh->vidq.stream))
+			goto done;
+		buf = list_entry(fh->vidq.stream.next,
+			struct cx23885_buffer, vb.stream);
+	} else {
+		/* read() capture */
+		buf = (struct cx23885_buffer *)fh->vidq.read_buf;
+		if (NULL == buf)
+			goto done;
+	}
+	poll_wait(file, &buf->vb.done, wait);
+	if (buf->vb.state == VIDEOBUF_DONE ||
+	    buf->vb.state == VIDEOBUF_ERROR)
+		rc =  POLLIN|POLLRDNORM;
+	else
+		rc = 0;
+done:
+	mutex_unlock(&fh->vidq.vb_lock);
+	return rc;
+}
+
+static int video_release(struct file *file)
+{
+	struct cx23885_fh *fh = file->private_data;
+	struct cx23885_dev *dev = fh->dev;
+
+	/* turn off overlay */
+	if (res_check(fh, RESOURCE_OVERLAY)) {
+		/* FIXME */
+		res_free(dev, fh, RESOURCE_OVERLAY);
+	}
+
+	/* stop video capture */
+	if (res_check(fh, RESOURCE_VIDEO)) {
+		videobuf_queue_cancel(&fh->vidq);
+		res_free(dev, fh, RESOURCE_VIDEO);
+	}
+	if (fh->vidq.read_buf) {
+		buffer_release(&fh->vidq, fh->vidq.read_buf);
+		kfree(fh->vidq.read_buf);
+	}
+
+	/* stop vbi capture */
+	if (res_check(fh, RESOURCE_VBI)) {
+		if (fh->vbiq.streaming)
+			videobuf_streamoff(&fh->vbiq);
+		if (fh->vbiq.reading)
+			videobuf_read_stop(&fh->vbiq);
+		res_free(dev, fh, RESOURCE_VBI);
+	}
+
+	videobuf_mmap_free(&fh->vidq);
+	videobuf_mmap_free(&fh->vbiq);
+
+	file->private_data = NULL;
+	kfree(fh);
+
+	/* We are not putting the tuner to sleep here on exit, because
+	 * we want to use the mpeg encoder in another session to capture
+	 * tuner video. Closing this will result in no video to the encoder.
+	 */
+
+	return 0;
+}
+
+static int video_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct cx23885_fh *fh = file->private_data;
+
+	return videobuf_mmap_mapper(get_queue(fh), vma);
+}
+
+/* ------------------------------------------------------------------ */
+/* VIDEO CTRL IOCTLS                                                  */
+
+int cx23885_get_control(struct cx23885_dev *dev,
+	struct v4l2_control *ctl)
+{
+	dprintk(1, "%s() calling cx25840(VIDIOC_G_CTRL)\n", __func__);
+	call_all(dev, core, g_ctrl, ctl);
+	return 0;
+}
+
+int cx23885_set_control(struct cx23885_dev *dev,
+	struct v4l2_control *ctl)
+{
+	dprintk(1, "%s() calling cx25840(VIDIOC_S_CTRL)\n", __func__);
+	call_all(dev, core, s_ctrl, ctl);
+
+	return 0;
+}
+
+static void init_controls(struct cx23885_dev *dev)
+{
+	struct v4l2_control ctrl;
+	int i;
+
+	for (i = 0; i < CX23885_CTLS; i++) {
+		ctrl.id = cx23885_ctls[i].v.id;
+		ctrl.value = cx23885_ctls[i].v.default_value;
+
+		cx23885_set_control(dev, &ctrl);
+	}
+}
+
+/* ------------------------------------------------------------------ */
+/* VIDEO IOCTLS                                                       */
+
+static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
+	struct v4l2_format *f)
+{
+	struct cx23885_fh *fh   = priv;
+
+	f->fmt.pix.width        = fh->width;
+	f->fmt.pix.height       = fh->height;
+	f->fmt.pix.field        = fh->vidq.field;
+	f->fmt.pix.pixelformat  = fh->fmt->fourcc;
+	f->fmt.pix.bytesperline =
+		(f->fmt.pix.width * fh->fmt->depth) >> 3;
+	f->fmt.pix.sizeimage =
+		f->fmt.pix.height * f->fmt.pix.bytesperline;
+
+	return 0;
+}
+
+static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
+	struct v4l2_format *f)
+{
+	struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev;
+	struct cx23885_fmt *fmt;
+	enum v4l2_field   field;
+	unsigned int      maxw, maxh;
+
+	fmt = format_by_fourcc(f->fmt.pix.pixelformat);
+	if (NULL == fmt)
+		return -EINVAL;
+
+	field = f->fmt.pix.field;
+	maxw  = norm_maxw(dev->tvnorm);
+	maxh  = norm_maxh(dev->tvnorm);
+
+	if (V4L2_FIELD_ANY == field) {
+		field = (f->fmt.pix.height > maxh/2)
+			? V4L2_FIELD_INTERLACED
+			: V4L2_FIELD_BOTTOM;
+	}
+
+	switch (field) {
+	case V4L2_FIELD_TOP:
+	case V4L2_FIELD_BOTTOM:
+		maxh = maxh / 2;
+		break;
+	case V4L2_FIELD_INTERLACED:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	f->fmt.pix.field = field;
+	v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2,
+			      &f->fmt.pix.height, 32, maxh, 0, 0);
+	f->fmt.pix.bytesperline =
+		(f->fmt.pix.width * fmt->depth) >> 3;
+	f->fmt.pix.sizeimage =
+		f->fmt.pix.height * f->fmt.pix.bytesperline;
+
+	return 0;
+}
+
+static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
+	struct v4l2_format *f)
+{
+	struct cx23885_fh *fh = priv;
+	struct cx23885_dev *dev  = ((struct cx23885_fh *)priv)->dev;
+	struct v4l2_mbus_framefmt mbus_fmt;
+	int err;
+
+	dprintk(2, "%s()\n", __func__);
+	err = vidioc_try_fmt_vid_cap(file, priv, f);
+
+	if (0 != err)
+		return err;
+	fh->fmt        = format_by_fourcc(f->fmt.pix.pixelformat);
+	fh->width      = f->fmt.pix.width;
+	fh->height     = f->fmt.pix.height;
+	fh->vidq.field = f->fmt.pix.field;
+	dprintk(2, "%s() width=%d height=%d field=%d\n", __func__,
+		fh->width, fh->height, fh->vidq.field);
+	v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, V4L2_MBUS_FMT_FIXED);
+	call_all(dev, video, s_mbus_fmt, &mbus_fmt);
+	v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt);
+	return 0;
+}
+
+static int vidioc_querycap(struct file *file, void  *priv,
+	struct v4l2_capability *cap)
+{
+	struct cx23885_dev *dev  = ((struct cx23885_fh *)priv)->dev;
+
+	strcpy(cap->driver, "cx23885");
+	strlcpy(cap->card, cx23885_boards[dev->board].name,
+		sizeof(cap->card));
+	sprintf(cap->bus_info, "PCIe:%s", pci_name(dev->pci));
+	cap->capabilities =
+		V4L2_CAP_VIDEO_CAPTURE |
+		V4L2_CAP_READWRITE     |
+		V4L2_CAP_STREAMING     |
+		V4L2_CAP_VBI_CAPTURE;
+	if (UNSET != dev->tuner_type)
+		cap->capabilities |= V4L2_CAP_TUNER;
+	return 0;
+}
+
+static int vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,
+	struct v4l2_fmtdesc *f)
+{
+	if (unlikely(f->index >= ARRAY_SIZE(formats)))
+		return -EINVAL;
+
+	strlcpy(f->description, formats[f->index].name,
+		sizeof(f->description));
+	f->pixelformat = formats[f->index].fourcc;
+
+	return 0;
+}
+
+static int vidioc_reqbufs(struct file *file, void *priv,
+	struct v4l2_requestbuffers *p)
+{
+	struct cx23885_fh *fh = priv;
+	return videobuf_reqbufs(get_queue(fh), p);
+}
+
+static int vidioc_querybuf(struct file *file, void *priv,
+	struct v4l2_buffer *p)
+{
+	struct cx23885_fh *fh = priv;
+	return videobuf_querybuf(get_queue(fh), p);
+}
+
+static int vidioc_qbuf(struct file *file, void *priv,
+	struct v4l2_buffer *p)
+{
+	struct cx23885_fh *fh = priv;
+	return videobuf_qbuf(get_queue(fh), p);
+}
+
+static int vidioc_dqbuf(struct file *file, void *priv,
+	struct v4l2_buffer *p)
+{
+	struct cx23885_fh *fh = priv;
+	return videobuf_dqbuf(get_queue(fh), p,
+				file->f_flags & O_NONBLOCK);
+}
+
+static int vidioc_streamon(struct file *file, void *priv,
+	enum v4l2_buf_type i)
+{
+	struct cx23885_fh *fh = priv;
+	struct cx23885_dev *dev = fh->dev;
+	dprintk(1, "%s()\n", __func__);
+
+	if ((fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
+		(fh->type != V4L2_BUF_TYPE_VBI_CAPTURE))
+		return -EINVAL;
+	if (unlikely(i != fh->type))
+		return -EINVAL;
+
+	if (unlikely(!res_get(dev, fh, get_resource(fh))))
+		return -EBUSY;
+
+	/* Don't start VBI streaming unless vida streaming
+	 * has already started.
+	 */
+	if ((fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) &&
+		((cx_read(VID_A_DMA_CTL) & 0x11) == 0))
+		return -EINVAL;
+
+	return videobuf_streamon(get_queue(fh));
+}
+
+static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
+{
+	struct cx23885_fh *fh = priv;
+	struct cx23885_dev *dev = fh->dev;
+	int err, res;
+	dprintk(1, "%s()\n", __func__);
+
+	if ((fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
+		(fh->type != V4L2_BUF_TYPE_VBI_CAPTURE))
+		return -EINVAL;
+	if (i != fh->type)
+		return -EINVAL;
+
+	res = get_resource(fh);
+	err = videobuf_streamoff(get_queue(fh));
+	if (err < 0)
+		return err;
+	res_free(dev, fh, res);
+	return 0;
+}
+
+static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *id)
+{
+	struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev;
+	dprintk(1, "%s()\n", __func__);
+
+	call_all(dev, core, g_std, id);
+
+	return 0;
+}
+
+static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *tvnorms)
+{
+	struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev;
+	dprintk(1, "%s()\n", __func__);
+
+	mutex_lock(&dev->lock);
+	cx23885_set_tvnorm(dev, *tvnorms);
+	mutex_unlock(&dev->lock);
+
+	return 0;
+}
+
+int cx23885_enum_input(struct cx23885_dev *dev, struct v4l2_input *i)
+{
+	static const char *iname[] = {
+		[CX23885_VMUX_COMPOSITE1] = "Composite1",
+		[CX23885_VMUX_COMPOSITE2] = "Composite2",
+		[CX23885_VMUX_COMPOSITE3] = "Composite3",
+		[CX23885_VMUX_COMPOSITE4] = "Composite4",
+		[CX23885_VMUX_SVIDEO]     = "S-Video",
+		[CX23885_VMUX_COMPONENT]  = "Component",
+		[CX23885_VMUX_TELEVISION] = "Television",
+		[CX23885_VMUX_CABLE]      = "Cable TV",
+		[CX23885_VMUX_DVB]        = "DVB",
+		[CX23885_VMUX_DEBUG]      = "for debug only",
+	};
+	unsigned int n;
+	dprintk(1, "%s()\n", __func__);
+
+	n = i->index;
+	if (n >= MAX_CX23885_INPUT)
+		return -EINVAL;
+
+	if (0 == INPUT(n)->type)
+		return -EINVAL;
+
+	i->index = n;
+	i->type  = V4L2_INPUT_TYPE_CAMERA;
+	strcpy(i->name, iname[INPUT(n)->type]);
+	if ((CX23885_VMUX_TELEVISION == INPUT(n)->type) ||
+		(CX23885_VMUX_CABLE == INPUT(n)->type)) {
+		i->type = V4L2_INPUT_TYPE_TUNER;
+		i->std = CX23885_NORMS;
+	}
+
+	/* Two selectable audio inputs for non-tv inputs */
+	if (INPUT(n)->type != CX23885_VMUX_TELEVISION)
+		i->audioset = 0x3;
+
+	if (dev->input == n) {
+		/* enum'd input matches our configured input.
+		 * Ask the video decoder to process the call
+		 * and give it an oppertunity to update the
+		 * status field.
+		 */
+		call_all(dev, video, g_input_status, &i->status);
+	}
+
+	return 0;
+}
+
+static int vidioc_enum_input(struct file *file, void *priv,
+				struct v4l2_input *i)
+{
+	struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev;
+	dprintk(1, "%s()\n", __func__);
+	return cx23885_enum_input(dev, i);
+}
+
+int cx23885_get_input(struct file *file, void *priv, unsigned int *i)
+{
+	struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev;
+
+	*i = dev->input;
+	dprintk(1, "%s() returns %d\n", __func__, *i);
+	return 0;
+}
+
+static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
+{
+	return cx23885_get_input(file, priv, i);
+}
+
+int cx23885_set_input(struct file *file, void *priv, unsigned int i)
+{
+	struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev;
+
+	dprintk(1, "%s(%d)\n", __func__, i);
+
+	if (i >= MAX_CX23885_INPUT) {
+		dprintk(1, "%s() -EINVAL\n", __func__);
+		return -EINVAL;
+	}
+
+	if (INPUT(i)->type == 0)
+		return -EINVAL;
+
+	mutex_lock(&dev->lock);
+	cx23885_video_mux(dev, i);
+
+	/* By default establish the default audio input for the card also */
+	/* Caller is free to use VIDIOC_S_AUDIO to override afterwards */
+	cx23885_audio_mux(dev, i);
+	mutex_unlock(&dev->lock);
+	return 0;
+}
+
+static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
+{
+	return cx23885_set_input(file, priv, i);
+}
+
+static int vidioc_log_status(struct file *file, void *priv)
+{
+	struct cx23885_fh  *fh  = priv;
+	struct cx23885_dev *dev = fh->dev;
+
+	printk(KERN_INFO
+		"%s/0: ============  START LOG STATUS  ============\n",
+		dev->name);
+	call_all(dev, core, log_status);
+	printk(KERN_INFO
+		"%s/0: =============  END LOG STATUS  =============\n",
+		dev->name);
+	return 0;
+}
+
+static int cx23885_query_audinput(struct file *file, void *priv,
+	struct v4l2_audio *i)
+{
+	struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev;
+	static const char *iname[] = {
+		[0] = "Baseband L/R 1",
+		[1] = "Baseband L/R 2",
+	};
+	unsigned int n;
+	dprintk(1, "%s()\n", __func__);
+
+	n = i->index;
+	if (n >= 2)
+		return -EINVAL;
+
+	memset(i, 0, sizeof(*i));
+	i->index = n;
+	strcpy(i->name, iname[n]);
+	i->capability  = V4L2_AUDCAP_STEREO;
+	i->mode  = V4L2_AUDMODE_AVL;
+	return 0;
+
+}
+
+static int vidioc_enum_audinput(struct file *file, void *priv,
+				struct v4l2_audio *i)
+{
+	return cx23885_query_audinput(file, priv, i);
+}
+
+static int vidioc_g_audinput(struct file *file, void *priv,
+	struct v4l2_audio *i)
+{
+	struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev;
+
+	i->index = dev->audinput;
+	dprintk(1, "%s(input=%d)\n", __func__, i->index);
+
+	return cx23885_query_audinput(file, priv, i);
+}
+
+static int vidioc_s_audinput(struct file *file, void *priv,
+	const struct v4l2_audio *i)
+{
+	struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev;
+	if (i->index >= 2)
+		return -EINVAL;
+
+	dprintk(1, "%s(%d)\n", __func__, i->index);
+
+	dev->audinput = i->index;
+
+	/* Skip the audio defaults from the cards struct, caller wants
+	 * directly touch the audio mux hardware. */
+	cx23885_flatiron_mux(dev, dev->audinput + 1);
+	return 0;
+}
+
+static int vidioc_queryctrl(struct file *file, void *priv,
+				struct v4l2_queryctrl *qctrl)
+{
+	qctrl->id = v4l2_ctrl_next(ctrl_classes, qctrl->id);
+	if (unlikely(qctrl->id == 0))
+		return -EINVAL;
+	return cx23885_ctrl_query(qctrl);
+}
+
+static int vidioc_g_ctrl(struct file *file, void *priv,
+				struct v4l2_control *ctl)
+{
+	struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev;
+
+	return cx23885_get_control(dev, ctl);
+}
+
+static int vidioc_s_ctrl(struct file *file, void *priv,
+				struct v4l2_control *ctl)
+{
+	struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev;
+
+	return cx23885_set_control(dev, ctl);
+}
+
+static int vidioc_g_tuner(struct file *file, void *priv,
+				struct v4l2_tuner *t)
+{
+	struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev;
+
+	if (unlikely(UNSET == dev->tuner_type))
+		return -EINVAL;
+	if (0 != t->index)
+		return -EINVAL;
+
+	strcpy(t->name, "Television");
+
+	call_all(dev, tuner, g_tuner, t);
+	return 0;
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+				struct v4l2_tuner *t)
+{
+	struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev;
+
+	if (UNSET == dev->tuner_type)
+		return -EINVAL;
+	if (0 != t->index)
+		return -EINVAL;
+	/* Update the A/V core */
+	call_all(dev, tuner, s_tuner, t);
+
+	return 0;
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *f)
+{
+	struct cx23885_fh *fh = priv;
+	struct cx23885_dev *dev = fh->dev;
+
+	if (unlikely(UNSET == dev->tuner_type))
+		return -EINVAL;
+
+	/* f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; */
+	f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
+	f->frequency = dev->freq;
+
+	call_all(dev, tuner, g_frequency, f);
+
+	return 0;
+}
+
+static int cx23885_set_freq(struct cx23885_dev *dev, struct v4l2_frequency *f)
+{
+	struct v4l2_control ctrl;
+
+	if (unlikely(UNSET == dev->tuner_type))
+		return -EINVAL;
+	if (unlikely(f->tuner != 0))
+		return -EINVAL;
+
+	mutex_lock(&dev->lock);
+	dev->freq = f->frequency;
+
+	/* I need to mute audio here */
+	ctrl.id = V4L2_CID_AUDIO_MUTE;
+	ctrl.value = 1;
+	cx23885_set_control(dev, &ctrl);
+
+	call_all(dev, tuner, s_frequency, f);
+
+	/* When changing channels it is required to reset TVAUDIO */
+	msleep(100);
+
+	/* I need to unmute audio here */
+	ctrl.value = 0;
+	cx23885_set_control(dev, &ctrl);
+
+	mutex_unlock(&dev->lock);
+
+	return 0;
+}
+
+static int cx23885_set_freq_via_ops(struct cx23885_dev *dev,
+	struct v4l2_frequency *f)
+{
+	struct v4l2_control ctrl;
+	struct videobuf_dvb_frontend *vfe;
+	struct dvb_frontend *fe;
+
+	struct analog_parameters params = {
+		.mode      = V4L2_TUNER_ANALOG_TV,
+		.audmode   = V4L2_TUNER_MODE_STEREO,
+		.std       = dev->tvnorm,
+		.frequency = f->frequency
+	};
+
+	mutex_lock(&dev->lock);
+	dev->freq = f->frequency;
+
+	/* I need to mute audio here */
+	ctrl.id = V4L2_CID_AUDIO_MUTE;
+	ctrl.value = 1;
+	cx23885_set_control(dev, &ctrl);
+
+	/* If HVR1850 */
+	dprintk(1, "%s() frequency=%d tuner=%d std=0x%llx\n", __func__,
+		params.frequency, f->tuner, params.std);
+
+	vfe = videobuf_dvb_get_frontend(&dev->ts2.frontends, 1);
+	if (!vfe) {
+		mutex_unlock(&dev->lock);
+		return -EINVAL;
+	}
+
+	fe = vfe->dvb.frontend;
+
+	if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) ||
+	    (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
+	    (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111))
+		fe = &dev->ts1.analog_fe;
+
+	if (fe && fe->ops.tuner_ops.set_analog_params) {
+		call_all(dev, core, s_std, dev->tvnorm);
+		fe->ops.tuner_ops.set_analog_params(fe, &params);
+	}
+	else
+		printk(KERN_ERR "%s() No analog tuner, aborting\n", __func__);
+
+	/* When changing channels it is required to reset TVAUDIO */
+	msleep(100);
+
+	/* I need to unmute audio here */
+	ctrl.value = 0;
+	cx23885_set_control(dev, &ctrl);
+
+	mutex_unlock(&dev->lock);
+
+	return 0;
+}
+
+int cx23885_set_frequency(struct file *file, void *priv,
+	struct v4l2_frequency *f)
+{
+	struct cx23885_fh *fh = priv;
+	struct cx23885_dev *dev = fh->dev;
+	int ret;
+
+	switch (dev->board) {
+	case CX23885_BOARD_HAUPPAUGE_HVR1255:
+	case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
+	case CX23885_BOARD_HAUPPAUGE_HVR1850:
+		ret = cx23885_set_freq_via_ops(dev, f);
+		break;
+	default:
+		ret = cx23885_set_freq(dev, f);
+	}
+
+	return ret;
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+	struct v4l2_frequency *f)
+{
+	return cx23885_set_frequency(file, priv, f);
+}
+
+/* ----------------------------------------------------------- */
+
+static void cx23885_vid_timeout(unsigned long data)
+{
+	struct cx23885_dev *dev = (struct cx23885_dev *)data;
+	struct cx23885_dmaqueue *q = &dev->vidq;
+	struct cx23885_buffer *buf;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->slock, flags);
+	while (!list_empty(&q->active)) {
+		buf = list_entry(q->active.next,
+			struct cx23885_buffer, vb.queue);
+		list_del(&buf->vb.queue);
+		buf->vb.state = VIDEOBUF_ERROR;
+		wake_up(&buf->vb.done);
+		printk(KERN_ERR "%s: [%p/%d] timeout - dma=0x%08lx\n",
+			dev->name, buf, buf->vb.i,
+			(unsigned long)buf->risc.dma);
+	}
+	cx23885_restart_video_queue(dev, q);
+	spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+int cx23885_video_irq(struct cx23885_dev *dev, u32 status)
+{
+	u32 mask, count;
+	int handled = 0;
+
+	mask   = cx_read(VID_A_INT_MSK);
+	if (0 == (status & mask))
+		return handled;
+
+	cx_write(VID_A_INT_STAT, status);
+
+	/* risc op code error, fifo overflow or line sync detection error */
+	if ((status & VID_BC_MSK_OPC_ERR) ||
+		(status & VID_BC_MSK_SYNC) ||
+		(status & VID_BC_MSK_OF)) {
+
+		if (status & VID_BC_MSK_OPC_ERR) {
+			dprintk(7, " (VID_BC_MSK_OPC_ERR 0x%08x)\n",
+				VID_BC_MSK_OPC_ERR);
+			printk(KERN_WARNING "%s: video risc op code error\n",
+				dev->name);
+			cx23885_sram_channel_dump(dev,
+				&dev->sram_channels[SRAM_CH01]);
+		}
+
+		if (status & VID_BC_MSK_SYNC)
+			dprintk(7, " (VID_BC_MSK_SYNC 0x%08x) "
+				"video lines miss-match\n",
+				VID_BC_MSK_SYNC);
+
+		if (status & VID_BC_MSK_OF)
+			dprintk(7, " (VID_BC_MSK_OF 0x%08x) fifo overflow\n",
+				VID_BC_MSK_OF);
+
+	}
+
+	/* Video */
+	if (status & VID_BC_MSK_RISCI1) {
+		spin_lock(&dev->slock);
+		count = cx_read(VID_A_GPCNT);
+		cx23885_video_wakeup(dev, &dev->vidq, count);
+		spin_unlock(&dev->slock);
+		handled++;
+	}
+	if (status & VID_BC_MSK_RISCI2) {
+		dprintk(2, "stopper video\n");
+		spin_lock(&dev->slock);
+		cx23885_restart_video_queue(dev, &dev->vidq);
+		spin_unlock(&dev->slock);
+		handled++;
+	}
+
+	/* Allow the VBI framework to process it's payload */
+	handled += cx23885_vbi_irq(dev, status);
+
+	return handled;
+}
+
+/* ----------------------------------------------------------- */
+/* exported stuff                                              */
+
+static const struct v4l2_file_operations video_fops = {
+	.owner	       = THIS_MODULE,
+	.open	       = video_open,
+	.release       = video_release,
+	.read	       = video_read,
+	.poll          = video_poll,
+	.mmap	       = video_mmap,
+	.ioctl	       = video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops video_ioctl_ops = {
+	.vidioc_querycap      = vidioc_querycap,
+	.vidioc_enum_fmt_vid_cap  = vidioc_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap     = vidioc_g_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap   = vidioc_try_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap     = vidioc_s_fmt_vid_cap,
+	.vidioc_g_fmt_vbi_cap     = cx23885_vbi_fmt,
+	.vidioc_try_fmt_vbi_cap   = cx23885_vbi_fmt,
+	.vidioc_s_fmt_vbi_cap     = cx23885_vbi_fmt,
+	.vidioc_reqbufs       = vidioc_reqbufs,
+	.vidioc_querybuf      = vidioc_querybuf,
+	.vidioc_qbuf          = vidioc_qbuf,
+	.vidioc_dqbuf         = vidioc_dqbuf,
+	.vidioc_s_std         = vidioc_s_std,
+	.vidioc_g_std         = vidioc_g_std,
+	.vidioc_querystd      = vidioc_g_std,
+	.vidioc_enum_input    = vidioc_enum_input,
+	.vidioc_g_input       = vidioc_g_input,
+	.vidioc_s_input       = vidioc_s_input,
+	.vidioc_log_status    = vidioc_log_status,
+	.vidioc_queryctrl     = vidioc_queryctrl,
+	.vidioc_g_ctrl        = vidioc_g_ctrl,
+	.vidioc_s_ctrl        = vidioc_s_ctrl,
+	.vidioc_streamon      = vidioc_streamon,
+	.vidioc_streamoff     = vidioc_streamoff,
+	.vidioc_g_tuner       = vidioc_g_tuner,
+	.vidioc_s_tuner       = vidioc_s_tuner,
+	.vidioc_g_frequency   = vidioc_g_frequency,
+	.vidioc_s_frequency   = vidioc_s_frequency,
+	.vidioc_g_chip_ident  = cx23885_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_register    = cx23885_g_register,
+	.vidioc_s_register    = cx23885_s_register,
+#endif
+	.vidioc_enumaudio     = vidioc_enum_audinput,
+	.vidioc_g_audio       = vidioc_g_audinput,
+	.vidioc_s_audio       = vidioc_s_audinput,
+};
+
+static struct video_device cx23885_vbi_template;
+static struct video_device cx23885_video_template = {
+	.name                 = "cx23885-video",
+	.fops                 = &video_fops,
+	.ioctl_ops 	      = &video_ioctl_ops,
+	.tvnorms              = CX23885_NORMS,
+	.current_norm         = V4L2_STD_NTSC_M,
+};
+
+static const struct v4l2_file_operations radio_fops = {
+	.owner         = THIS_MODULE,
+	.open          = video_open,
+	.release       = video_release,
+	.ioctl         = video_ioctl2,
+};
+
+
+void cx23885_video_unregister(struct cx23885_dev *dev)
+{
+	dprintk(1, "%s()\n", __func__);
+	cx23885_irq_remove(dev, 0x01);
+
+	if (dev->vbi_dev) {
+		if (video_is_registered(dev->vbi_dev))
+			video_unregister_device(dev->vbi_dev);
+		else
+			video_device_release(dev->vbi_dev);
+		dev->vbi_dev = NULL;
+		btcx_riscmem_free(dev->pci, &dev->vbiq.stopper);
+	}
+	if (dev->video_dev) {
+		if (video_is_registered(dev->video_dev))
+			video_unregister_device(dev->video_dev);
+		else
+			video_device_release(dev->video_dev);
+		dev->video_dev = NULL;
+
+		btcx_riscmem_free(dev->pci, &dev->vidq.stopper);
+	}
+
+	if (dev->audio_dev)
+		cx23885_audio_unregister(dev);
+}
+
+int cx23885_video_register(struct cx23885_dev *dev)
+{
+	int err;
+
+	dprintk(1, "%s()\n", __func__);
+	spin_lock_init(&dev->slock);
+
+	/* Initialize VBI template */
+	memcpy(&cx23885_vbi_template, &cx23885_video_template,
+		sizeof(cx23885_vbi_template));
+	strcpy(cx23885_vbi_template.name, "cx23885-vbi");
+
+	dev->tvnorm = cx23885_video_template.current_norm;
+
+	/* init video dma queues */
+	INIT_LIST_HEAD(&dev->vidq.active);
+	INIT_LIST_HEAD(&dev->vidq.queued);
+	dev->vidq.timeout.function = cx23885_vid_timeout;
+	dev->vidq.timeout.data = (unsigned long)dev;
+	init_timer(&dev->vidq.timeout);
+	cx23885_risc_stopper(dev->pci, &dev->vidq.stopper,
+		VID_A_DMA_CTL, 0x11, 0x00);
+
+	/* init vbi dma queues */
+	INIT_LIST_HEAD(&dev->vbiq.active);
+	INIT_LIST_HEAD(&dev->vbiq.queued);
+	dev->vbiq.timeout.function = cx23885_vbi_timeout;
+	dev->vbiq.timeout.data = (unsigned long)dev;
+	init_timer(&dev->vbiq.timeout);
+	cx23885_risc_stopper(dev->pci, &dev->vbiq.stopper,
+		VID_A_DMA_CTL, 0x22, 0x00);
+
+	cx23885_irq_add_enable(dev, 0x01);
+
+	if ((TUNER_ABSENT != dev->tuner_type) &&
+			((dev->tuner_bus == 0) || (dev->tuner_bus == 1))) {
+		struct v4l2_subdev *sd = NULL;
+
+		if (dev->tuner_addr)
+			sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
+				&dev->i2c_bus[dev->tuner_bus].i2c_adap,
+				"tuner", dev->tuner_addr, NULL);
+		else
+			sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
+				&dev->i2c_bus[dev->tuner_bus].i2c_adap,
+				"tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_TV));
+		if (sd) {
+			struct tuner_setup tun_setup;
+
+			memset(&tun_setup, 0, sizeof(tun_setup));
+			tun_setup.mode_mask = T_ANALOG_TV;
+			tun_setup.type = dev->tuner_type;
+			tun_setup.addr = v4l2_i2c_subdev_addr(sd);
+			tun_setup.tuner_callback = cx23885_tuner_callback;
+
+			v4l2_subdev_call(sd, tuner, s_type_addr, &tun_setup);
+
+			if (dev->board == CX23885_BOARD_LEADTEK_WINFAST_PXTV1200) {
+				struct xc2028_ctrl ctrl = {
+					.fname = XC2028_DEFAULT_FIRMWARE,
+					.max_len = 64
+				};
+				struct v4l2_priv_tun_config cfg = {
+					.tuner = dev->tuner_type,
+					.priv = &ctrl
+				};
+				v4l2_subdev_call(sd, tuner, s_config, &cfg);
+			}
+		}
+	}
+
+	/* register Video device */
+	dev->video_dev = cx23885_vdev_init(dev, dev->pci,
+		&cx23885_video_template, "video");
+	err = video_register_device(dev->video_dev, VFL_TYPE_GRABBER,
+				    video_nr[dev->nr]);
+	if (err < 0) {
+		printk(KERN_INFO "%s: can't register video device\n",
+			dev->name);
+		goto fail_unreg;
+	}
+	printk(KERN_INFO "%s: registered device %s [v4l2]\n",
+	       dev->name, video_device_node_name(dev->video_dev));
+
+	/* register VBI device */
+	dev->vbi_dev = cx23885_vdev_init(dev, dev->pci,
+		&cx23885_vbi_template, "vbi");
+	err = video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
+				    vbi_nr[dev->nr]);
+	if (err < 0) {
+		printk(KERN_INFO "%s: can't register vbi device\n",
+			dev->name);
+		goto fail_unreg;
+	}
+	printk(KERN_INFO "%s: registered device %s\n",
+	       dev->name, video_device_node_name(dev->vbi_dev));
+
+	/* Register ALSA audio device */
+	dev->audio_dev = cx23885_audio_register(dev);
+
+	/* initial device configuration */
+	mutex_lock(&dev->lock);
+	cx23885_set_tvnorm(dev, dev->tvnorm);
+	init_controls(dev);
+	cx23885_video_mux(dev, 0);
+	cx23885_audio_mux(dev, 0);
+	mutex_unlock(&dev->lock);
+
+	return 0;
+
+fail_unreg:
+	cx23885_video_unregister(dev);
+	return err;
+}
+
diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h
new file mode 100644
index 0000000..67f40d3
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23885.h
@@ -0,0 +1,654 @@
+/*
+ *  Driver for the Conexant CX23885 PCIe bridge
+ *
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/kdev_t.h>
+#include <linux/slab.h>
+
+#include <media/v4l2-device.h>
+#include <media/tuner.h>
+#include <media/tveeprom.h>
+#include <media/videobuf-dma-sg.h>
+#include <media/videobuf-dvb.h>
+#include <media/rc-core.h>
+
+#include "btcx-risc.h"
+#include "cx23885-reg.h"
+#include "media/cx2341x.h"
+
+#include <linux/mutex.h>
+
+#define CX23885_VERSION "0.0.3"
+
+#define UNSET (-1U)
+
+#define CX23885_MAXBOARDS 8
+
+/* Max number of inputs by card */
+#define MAX_CX23885_INPUT 8
+#define INPUT(nr) (&cx23885_boards[dev->board].input[nr])
+#define RESOURCE_OVERLAY       1
+#define RESOURCE_VIDEO         2
+#define RESOURCE_VBI           4
+
+#define BUFFER_TIMEOUT     (HZ)  /* 0.5 seconds */
+
+#define CX23885_BOARD_NOAUTO               UNSET
+#define CX23885_BOARD_UNKNOWN                  0
+#define CX23885_BOARD_HAUPPAUGE_HVR1800lp      1
+#define CX23885_BOARD_HAUPPAUGE_HVR1800        2
+#define CX23885_BOARD_HAUPPAUGE_HVR1250        3
+#define CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP   4
+#define CX23885_BOARD_HAUPPAUGE_HVR1500Q       5
+#define CX23885_BOARD_HAUPPAUGE_HVR1500        6
+#define CX23885_BOARD_HAUPPAUGE_HVR1200        7
+#define CX23885_BOARD_HAUPPAUGE_HVR1700        8
+#define CX23885_BOARD_HAUPPAUGE_HVR1400        9
+#define CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP 10
+#define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP 11
+#define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H 12
+#define CX23885_BOARD_COMPRO_VIDEOMATE_E650F   13
+#define CX23885_BOARD_TBS_6920                 14
+#define CX23885_BOARD_TEVII_S470               15
+#define CX23885_BOARD_DVBWORLD_2005            16
+#define CX23885_BOARD_NETUP_DUAL_DVBS2_CI      17
+#define CX23885_BOARD_HAUPPAUGE_HVR1270        18
+#define CX23885_BOARD_HAUPPAUGE_HVR1275        19
+#define CX23885_BOARD_HAUPPAUGE_HVR1255        20
+#define CX23885_BOARD_HAUPPAUGE_HVR1210        21
+#define CX23885_BOARD_MYGICA_X8506             22
+#define CX23885_BOARD_MAGICPRO_PROHDTVE2       23
+#define CX23885_BOARD_HAUPPAUGE_HVR1850        24
+#define CX23885_BOARD_COMPRO_VIDEOMATE_E800    25
+#define CX23885_BOARD_HAUPPAUGE_HVR1290        26
+#define CX23885_BOARD_MYGICA_X8558PRO          27
+#define CX23885_BOARD_LEADTEK_WINFAST_PXTV1200 28
+#define CX23885_BOARD_GOTVIEW_X5_3D_HYBRID     29
+#define CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF 30
+#define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000 31
+#define CX23885_BOARD_MPX885                   32
+#define CX23885_BOARD_MYGICA_X8507             33
+#define CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL 34
+#define CX23885_BOARD_TEVII_S471               35
+#define CX23885_BOARD_HAUPPAUGE_HVR1255_22111  36
+#define CX23885_BOARD_PROF_8000                37
+
+#define GPIO_0 0x00000001
+#define GPIO_1 0x00000002
+#define GPIO_2 0x00000004
+#define GPIO_3 0x00000008
+#define GPIO_4 0x00000010
+#define GPIO_5 0x00000020
+#define GPIO_6 0x00000040
+#define GPIO_7 0x00000080
+#define GPIO_8 0x00000100
+#define GPIO_9 0x00000200
+#define GPIO_10 0x00000400
+#define GPIO_11 0x00000800
+#define GPIO_12 0x00001000
+#define GPIO_13 0x00002000
+#define GPIO_14 0x00004000
+#define GPIO_15 0x00008000
+
+/* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */
+#define CX23885_NORMS (\
+	V4L2_STD_NTSC_M |  V4L2_STD_NTSC_M_JP |  V4L2_STD_NTSC_443 | \
+	V4L2_STD_PAL_BG |  V4L2_STD_PAL_DK    |  V4L2_STD_PAL_I    | \
+	V4L2_STD_PAL_M  |  V4L2_STD_PAL_N     |  V4L2_STD_PAL_Nc   | \
+	V4L2_STD_PAL_60 |  V4L2_STD_SECAM_L   |  V4L2_STD_SECAM_DK)
+
+struct cx23885_fmt {
+	char  *name;
+	u32   fourcc;          /* v4l2 format id */
+	int   depth;
+	int   flags;
+	u32   cxformat;
+};
+
+struct cx23885_ctrl {
+	struct v4l2_queryctrl v;
+	u32                   off;
+	u32                   reg;
+	u32                   mask;
+	u32                   shift;
+};
+
+struct cx23885_tvnorm {
+	char		*name;
+	v4l2_std_id	id;
+	u32		cxiformat;
+	u32		cxoformat;
+};
+
+struct cx23885_fh {
+	struct cx23885_dev         *dev;
+	enum v4l2_buf_type         type;
+	int                        radio;
+	u32                        resources;
+
+	/* video overlay */
+	struct v4l2_window         win;
+	struct v4l2_clip           *clips;
+	unsigned int               nclips;
+
+	/* video capture */
+	struct cx23885_fmt         *fmt;
+	unsigned int               width, height;
+
+	/* vbi capture */
+	struct videobuf_queue      vidq;
+	struct videobuf_queue      vbiq;
+
+	/* MPEG Encoder specifics ONLY */
+	struct videobuf_queue      mpegq;
+	atomic_t                   v4l_reading;
+};
+
+enum cx23885_itype {
+	CX23885_VMUX_COMPOSITE1 = 1,
+	CX23885_VMUX_COMPOSITE2,
+	CX23885_VMUX_COMPOSITE3,
+	CX23885_VMUX_COMPOSITE4,
+	CX23885_VMUX_SVIDEO,
+	CX23885_VMUX_COMPONENT,
+	CX23885_VMUX_TELEVISION,
+	CX23885_VMUX_CABLE,
+	CX23885_VMUX_DVB,
+	CX23885_VMUX_DEBUG,
+	CX23885_RADIO,
+};
+
+enum cx23885_src_sel_type {
+	CX23885_SRC_SEL_EXT_656_VIDEO = 0,
+	CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO
+};
+
+/* buffer for one video frame */
+struct cx23885_buffer {
+	/* common v4l buffer stuff -- must be first */
+	struct videobuf_buffer vb;
+
+	/* cx23885 specific */
+	unsigned int           bpl;
+	struct btcx_riscmem    risc;
+	struct cx23885_fmt     *fmt;
+	u32                    count;
+};
+
+struct cx23885_input {
+	enum cx23885_itype type;
+	unsigned int    vmux;
+	unsigned int    amux;
+	u32             gpio0, gpio1, gpio2, gpio3;
+};
+
+typedef enum {
+	CX23885_MPEG_UNDEFINED = 0,
+	CX23885_MPEG_DVB,
+	CX23885_ANALOG_VIDEO,
+	CX23885_MPEG_ENCODER,
+} port_t;
+
+struct cx23885_board {
+	char                    *name;
+	port_t			porta, portb, portc;
+	int		num_fds_portb, num_fds_portc;
+	unsigned int		tuner_type;
+	unsigned int		radio_type;
+	unsigned char		tuner_addr;
+	unsigned char		radio_addr;
+	unsigned int		tuner_bus;
+
+	/* Vendors can and do run the PCIe bridge at different
+	 * clock rates, driven physically by crystals on the PCBs.
+	 * The core has to accommodate this. This allows the user
+	 * to add new boards with new frequencys. The value is
+	 * expressed in Hz.
+	 *
+	 * The core framework will default this value based on
+	 * current designs, but it can vary.
+	 */
+	u32			clk_freq;
+	struct cx23885_input    input[MAX_CX23885_INPUT];
+	int			ci_type; /* for NetUP */
+	/* Force bottom field first during DMA (888 workaround) */
+	u32                     force_bff;
+};
+
+struct cx23885_subid {
+	u16     subvendor;
+	u16     subdevice;
+	u32     card;
+};
+
+struct cx23885_i2c {
+	struct cx23885_dev *dev;
+
+	int                        nr;
+
+	/* i2c i/o */
+	struct i2c_adapter         i2c_adap;
+	struct i2c_client          i2c_client;
+	u32                        i2c_rc;
+
+	/* 885 registers used for raw addess */
+	u32                        i2c_period;
+	u32                        reg_ctrl;
+	u32                        reg_stat;
+	u32                        reg_addr;
+	u32                        reg_rdata;
+	u32                        reg_wdata;
+};
+
+struct cx23885_dmaqueue {
+	struct list_head       active;
+	struct list_head       queued;
+	struct timer_list      timeout;
+	struct btcx_riscmem    stopper;
+	u32                    count;
+};
+
+struct cx23885_tsport {
+	struct cx23885_dev *dev;
+
+	int                        nr;
+	int                        sram_chno;
+
+	struct videobuf_dvb_frontends frontends;
+
+	/* dma queues */
+	struct cx23885_dmaqueue    mpegq;
+	u32                        ts_packet_size;
+	u32                        ts_packet_count;
+
+	int                        width;
+	int                        height;
+
+	spinlock_t                 slock;
+
+	/* registers */
+	u32                        reg_gpcnt;
+	u32                        reg_gpcnt_ctl;
+	u32                        reg_dma_ctl;
+	u32                        reg_lngth;
+	u32                        reg_hw_sop_ctrl;
+	u32                        reg_gen_ctrl;
+	u32                        reg_bd_pkt_status;
+	u32                        reg_sop_status;
+	u32                        reg_fifo_ovfl_stat;
+	u32                        reg_vld_misc;
+	u32                        reg_ts_clk_en;
+	u32                        reg_ts_int_msk;
+	u32                        reg_ts_int_stat;
+	u32                        reg_src_sel;
+
+	/* Default register vals */
+	int                        pci_irqmask;
+	u32                        dma_ctl_val;
+	u32                        ts_int_msk_val;
+	u32                        gen_ctrl_val;
+	u32                        ts_clk_en_val;
+	u32                        src_sel_val;
+	u32                        vld_misc_val;
+	u32                        hw_sop_ctrl_val;
+
+	/* Allow a single tsport to have multiple frontends */
+	u32                        num_frontends;
+	void                (*gate_ctrl)(struct cx23885_tsport *port, int open);
+	void                       *port_priv;
+
+	/* Workaround for a temp dvb_frontend that the tuner can attached to */
+	struct dvb_frontend analog_fe;
+};
+
+struct cx23885_kernel_ir {
+	struct cx23885_dev	*cx;
+	char			*name;
+	char			*phys;
+
+	struct rc_dev		*rc;
+};
+
+struct cx23885_audio_buffer {
+	unsigned int		bpl;
+	struct btcx_riscmem	risc;
+	struct videobuf_dmabuf	dma;
+};
+
+struct cx23885_audio_dev {
+	struct cx23885_dev	*dev;
+
+	struct pci_dev		*pci;
+
+	struct snd_card		*card;
+
+	spinlock_t		lock;
+
+	atomic_t		count;
+
+	unsigned int		dma_size;
+	unsigned int		period_size;
+	unsigned int		num_periods;
+
+	struct videobuf_dmabuf	*dma_risc;
+
+	struct cx23885_audio_buffer   *buf;
+
+	struct snd_pcm_substream *substream;
+};
+
+struct cx23885_dev {
+	atomic_t                   refcount;
+	struct v4l2_device 	   v4l2_dev;
+
+	/* pci stuff */
+	struct pci_dev             *pci;
+	unsigned char              pci_rev, pci_lat;
+	int                        pci_bus, pci_slot;
+	u32                        __iomem *lmmio;
+	u8                         __iomem *bmmio;
+	int                        pci_irqmask;
+	spinlock_t		   pci_irqmask_lock; /* protects mask reg too */
+	int                        hwrevision;
+
+	/* This valud is board specific and is used to configure the
+	 * AV core so we see nice clean and stable video and audio. */
+	u32                        clk_freq;
+
+	/* I2C adapters: Master 1 & 2 (External) & Master 3 (Internal only) */
+	struct cx23885_i2c         i2c_bus[3];
+
+	int                        nr;
+	struct mutex               lock;
+	struct mutex               gpio_lock;
+
+	/* board details */
+	unsigned int               board;
+	char                       name[32];
+
+	struct cx23885_tsport      ts1, ts2;
+
+	/* sram configuration */
+	struct sram_channel        *sram_channels;
+
+	enum {
+		CX23885_BRIDGE_UNDEFINED = 0,
+		CX23885_BRIDGE_885 = 885,
+		CX23885_BRIDGE_887 = 887,
+		CX23885_BRIDGE_888 = 888,
+	} bridge;
+
+	/* Analog video */
+	u32                        resources;
+	unsigned int               input;
+	unsigned int               audinput; /* Selectable audio input */
+	u32                        tvaudio;
+	v4l2_std_id                tvnorm;
+	unsigned int               tuner_type;
+	unsigned char              tuner_addr;
+	unsigned int               tuner_bus;
+	unsigned int               radio_type;
+	unsigned char              radio_addr;
+	unsigned int               has_radio;
+	struct v4l2_subdev 	   *sd_cx25840;
+	struct work_struct	   cx25840_work;
+
+	/* Infrared */
+	struct v4l2_subdev         *sd_ir;
+	struct work_struct	   ir_rx_work;
+	unsigned long		   ir_rx_notifications;
+	struct work_struct	   ir_tx_work;
+	unsigned long		   ir_tx_notifications;
+
+	struct cx23885_kernel_ir   *kernel_ir;
+	atomic_t		   ir_input_stopping;
+
+	/* V4l */
+	u32                        freq;
+	struct video_device        *video_dev;
+	struct video_device        *vbi_dev;
+	struct video_device        *radio_dev;
+
+	struct cx23885_dmaqueue    vidq;
+	struct cx23885_dmaqueue    vbiq;
+	spinlock_t                 slock;
+
+	/* MPEG Encoder ONLY settings */
+	u32                        cx23417_mailbox;
+	struct cx2341x_mpeg_params mpeg_params;
+	struct video_device        *v4l_device;
+	atomic_t                   v4l_reader_count;
+	struct cx23885_tvnorm      encodernorm;
+
+	/* Analog raw audio */
+	struct cx23885_audio_dev   *audio_dev;
+
+};
+
+static inline struct cx23885_dev *to_cx23885(struct v4l2_device *v4l2_dev)
+{
+	return container_of(v4l2_dev, struct cx23885_dev, v4l2_dev);
+}
+
+#define call_all(dev, o, f, args...) \
+	v4l2_device_call_all(&dev->v4l2_dev, 0, o, f, ##args)
+
+#define CX23885_HW_888_IR  (1 << 0)
+#define CX23885_HW_AV_CORE (1 << 1)
+
+#define call_hw(dev, grpid, o, f, args...) \
+	v4l2_device_call_all(&dev->v4l2_dev, grpid, o, f, ##args)
+
+extern struct v4l2_subdev *cx23885_find_hw(struct cx23885_dev *dev, u32 hw);
+
+#define SRAM_CH01  0 /* Video A */
+#define SRAM_CH02  1 /* VBI A */
+#define SRAM_CH03  2 /* Video B */
+#define SRAM_CH04  3 /* Transport via B */
+#define SRAM_CH05  4 /* VBI B */
+#define SRAM_CH06  5 /* Video C */
+#define SRAM_CH07  6 /* Transport via C */
+#define SRAM_CH08  7 /* Audio Internal A */
+#define SRAM_CH09  8 /* Audio Internal B */
+#define SRAM_CH10  9 /* Audio External */
+#define SRAM_CH11 10 /* COMB_3D_N */
+#define SRAM_CH12 11 /* Comb 3D N1 */
+#define SRAM_CH13 12 /* Comb 3D N2 */
+#define SRAM_CH14 13 /* MOE Vid */
+#define SRAM_CH15 14 /* MOE RSLT */
+
+struct sram_channel {
+	char *name;
+	u32  cmds_start;
+	u32  ctrl_start;
+	u32  cdt;
+	u32  fifo_start;
+	u32  fifo_size;
+	u32  ptr1_reg;
+	u32  ptr2_reg;
+	u32  cnt1_reg;
+	u32  cnt2_reg;
+	u32  jumponly;
+};
+
+/* ----------------------------------------------------------- */
+
+#define cx_read(reg)             readl(dev->lmmio + ((reg)>>2))
+#define cx_write(reg, value)     writel((value), dev->lmmio + ((reg)>>2))
+
+#define cx_andor(reg, mask, value) \
+  writel((readl(dev->lmmio+((reg)>>2)) & ~(mask)) |\
+  ((value) & (mask)), dev->lmmio+((reg)>>2))
+
+#define cx_set(reg, bit)          cx_andor((reg), (bit), (bit))
+#define cx_clear(reg, bit)        cx_andor((reg), (bit), 0)
+
+/* ----------------------------------------------------------- */
+/* cx23885-core.c                                              */
+
+extern int cx23885_sram_channel_setup(struct cx23885_dev *dev,
+	struct sram_channel *ch,
+	unsigned int bpl, u32 risc);
+
+extern void cx23885_sram_channel_dump(struct cx23885_dev *dev,
+	struct sram_channel *ch);
+
+extern int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
+	u32 reg, u32 mask, u32 value);
+
+extern int cx23885_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc,
+	struct scatterlist *sglist,
+	unsigned int top_offset, unsigned int bottom_offset,
+	unsigned int bpl, unsigned int padding, unsigned int lines);
+
+extern int cx23885_risc_vbibuffer(struct pci_dev *pci,
+	struct btcx_riscmem *risc, struct scatterlist *sglist,
+	unsigned int top_offset, unsigned int bottom_offset,
+	unsigned int bpl, unsigned int padding, unsigned int lines);
+
+void cx23885_cancel_buffers(struct cx23885_tsport *port);
+
+extern int cx23885_restart_queue(struct cx23885_tsport *port,
+				struct cx23885_dmaqueue *q);
+
+extern void cx23885_wakeup(struct cx23885_tsport *port,
+			   struct cx23885_dmaqueue *q, u32 count);
+
+extern void cx23885_gpio_set(struct cx23885_dev *dev, u32 mask);
+extern void cx23885_gpio_clear(struct cx23885_dev *dev, u32 mask);
+extern u32 cx23885_gpio_get(struct cx23885_dev *dev, u32 mask);
+extern void cx23885_gpio_enable(struct cx23885_dev *dev, u32 mask,
+	int asoutput);
+
+extern void cx23885_irq_add_enable(struct cx23885_dev *dev, u32 mask);
+extern void cx23885_irq_enable(struct cx23885_dev *dev, u32 mask);
+extern void cx23885_irq_disable(struct cx23885_dev *dev, u32 mask);
+extern void cx23885_irq_remove(struct cx23885_dev *dev, u32 mask);
+
+/* ----------------------------------------------------------- */
+/* cx23885-cards.c                                             */
+extern struct cx23885_board cx23885_boards[];
+extern const unsigned int cx23885_bcount;
+
+extern struct cx23885_subid cx23885_subids[];
+extern const unsigned int cx23885_idcount;
+
+extern int cx23885_tuner_callback(void *priv, int component,
+	int command, int arg);
+extern void cx23885_card_list(struct cx23885_dev *dev);
+extern int  cx23885_ir_init(struct cx23885_dev *dev);
+extern void cx23885_ir_pci_int_enable(struct cx23885_dev *dev);
+extern void cx23885_ir_fini(struct cx23885_dev *dev);
+extern void cx23885_gpio_setup(struct cx23885_dev *dev);
+extern void cx23885_card_setup(struct cx23885_dev *dev);
+extern void cx23885_card_setup_pre_i2c(struct cx23885_dev *dev);
+
+extern int cx23885_dvb_register(struct cx23885_tsport *port);
+extern int cx23885_dvb_unregister(struct cx23885_tsport *port);
+
+extern int cx23885_buf_prepare(struct videobuf_queue *q,
+			       struct cx23885_tsport *port,
+			       struct cx23885_buffer *buf,
+			       enum v4l2_field field);
+extern void cx23885_buf_queue(struct cx23885_tsport *port,
+			      struct cx23885_buffer *buf);
+extern void cx23885_free_buffer(struct videobuf_queue *q,
+				struct cx23885_buffer *buf);
+
+/* ----------------------------------------------------------- */
+/* cx23885-video.c                                             */
+/* Video */
+extern int cx23885_video_register(struct cx23885_dev *dev);
+extern void cx23885_video_unregister(struct cx23885_dev *dev);
+extern int cx23885_video_irq(struct cx23885_dev *dev, u32 status);
+extern void cx23885_video_wakeup(struct cx23885_dev *dev,
+	struct cx23885_dmaqueue *q, u32 count);
+int cx23885_enum_input(struct cx23885_dev *dev, struct v4l2_input *i);
+int cx23885_set_input(struct file *file, void *priv, unsigned int i);
+int cx23885_get_input(struct file *file, void *priv, unsigned int *i);
+int cx23885_set_frequency(struct file *file, void *priv, struct v4l2_frequency *f);
+int cx23885_set_control(struct cx23885_dev *dev, struct v4l2_control *ctl);
+int cx23885_get_control(struct cx23885_dev *dev, struct v4l2_control *ctl);
+int cx23885_set_tvnorm(struct cx23885_dev *dev, v4l2_std_id norm);
+
+/* ----------------------------------------------------------- */
+/* cx23885-vbi.c                                               */
+extern int cx23885_vbi_fmt(struct file *file, void *priv,
+	struct v4l2_format *f);
+extern void cx23885_vbi_timeout(unsigned long data);
+extern struct videobuf_queue_ops cx23885_vbi_qops;
+extern int cx23885_restart_vbi_queue(struct cx23885_dev *dev,
+	struct cx23885_dmaqueue *q);
+extern int cx23885_vbi_irq(struct cx23885_dev *dev, u32 status);
+
+/* cx23885-i2c.c                                                */
+extern int cx23885_i2c_register(struct cx23885_i2c *bus);
+extern int cx23885_i2c_unregister(struct cx23885_i2c *bus);
+extern void cx23885_av_clk(struct cx23885_dev *dev, int enable);
+
+/* ----------------------------------------------------------- */
+/* cx23885-417.c                                               */
+extern int cx23885_417_register(struct cx23885_dev *dev);
+extern void cx23885_417_unregister(struct cx23885_dev *dev);
+extern int cx23885_irq_417(struct cx23885_dev *dev, u32 status);
+extern void cx23885_417_check_encoder(struct cx23885_dev *dev);
+extern void cx23885_mc417_init(struct cx23885_dev *dev);
+extern int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value);
+extern int mc417_memory_write(struct cx23885_dev *dev, u32 address, u32 value);
+extern int mc417_register_read(struct cx23885_dev *dev,
+				u16 address, u32 *value);
+extern int mc417_register_write(struct cx23885_dev *dev,
+				u16 address, u32 value);
+extern void mc417_gpio_set(struct cx23885_dev *dev, u32 mask);
+extern void mc417_gpio_clear(struct cx23885_dev *dev, u32 mask);
+extern void mc417_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput);
+
+/* ----------------------------------------------------------- */
+/* cx23885-alsa.c                                             */
+extern struct cx23885_audio_dev *cx23885_audio_register(
+					struct cx23885_dev *dev);
+extern void cx23885_audio_unregister(struct cx23885_dev *dev);
+extern int cx23885_audio_irq(struct cx23885_dev *dev, u32 status, u32 mask);
+extern int cx23885_risc_databuffer(struct pci_dev *pci,
+				   struct btcx_riscmem *risc,
+				   struct scatterlist *sglist,
+				   unsigned int bpl,
+				   unsigned int lines,
+				   unsigned int lpi);
+
+/* ----------------------------------------------------------- */
+/* tv norms                                                    */
+
+static inline unsigned int norm_maxw(v4l2_std_id norm)
+{
+	return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 720 : 768;
+}
+
+static inline unsigned int norm_maxh(v4l2_std_id norm)
+{
+	return (norm & V4L2_STD_625_50) ? 576 : 480;
+}
+
+static inline unsigned int norm_swidth(v4l2_std_id norm)
+{
+	return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 754 : 922;
+}
diff --git a/drivers/media/pci/cx23885/cx23888-ir.c b/drivers/media/pci/cx23885/cx23888-ir.c
new file mode 100644
index 0000000..c2bc39c
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23888-ir.c
@@ -0,0 +1,1271 @@
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  CX23888 Integrated Consumer Infrared Controller
+ *
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ */
+
+#include <linux/kfifo.h>
+#include <linux/slab.h>
+
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/rc-core.h>
+
+#include "cx23885.h"
+
+static unsigned int ir_888_debug;
+module_param(ir_888_debug, int, 0644);
+MODULE_PARM_DESC(ir_888_debug, "enable debug messages [CX23888 IR controller]");
+
+#define CX23888_IR_REG_BASE 	0x170000
+/*
+ * These CX23888 register offsets have a straightforward one to one mapping
+ * to the CX23885 register offsets of 0x200 through 0x218
+ */
+#define CX23888_IR_CNTRL_REG	0x170000
+#define CNTRL_WIN_3_3	0x00000000
+#define CNTRL_WIN_4_3	0x00000001
+#define CNTRL_WIN_3_4	0x00000002
+#define CNTRL_WIN_4_4	0x00000003
+#define CNTRL_WIN	0x00000003
+#define CNTRL_EDG_NONE	0x00000000
+#define CNTRL_EDG_FALL	0x00000004
+#define CNTRL_EDG_RISE	0x00000008
+#define CNTRL_EDG_BOTH	0x0000000C
+#define CNTRL_EDG	0x0000000C
+#define CNTRL_DMD	0x00000010
+#define CNTRL_MOD	0x00000020
+#define CNTRL_RFE	0x00000040
+#define CNTRL_TFE	0x00000080
+#define CNTRL_RXE	0x00000100
+#define CNTRL_TXE	0x00000200
+#define CNTRL_RIC	0x00000400
+#define CNTRL_TIC	0x00000800
+#define CNTRL_CPL	0x00001000
+#define CNTRL_LBM	0x00002000
+#define CNTRL_R		0x00004000
+/* CX23888 specific control flag */
+#define CNTRL_IVO	0x00008000
+
+#define CX23888_IR_TXCLK_REG	0x170004
+#define TXCLK_TCD	0x0000FFFF
+
+#define CX23888_IR_RXCLK_REG	0x170008
+#define RXCLK_RCD	0x0000FFFF
+
+#define CX23888_IR_CDUTY_REG	0x17000C
+#define CDUTY_CDC	0x0000000F
+
+#define CX23888_IR_STATS_REG	0x170010
+#define STATS_RTO	0x00000001
+#define STATS_ROR	0x00000002
+#define STATS_RBY	0x00000004
+#define STATS_TBY	0x00000008
+#define STATS_RSR	0x00000010
+#define STATS_TSR	0x00000020
+
+#define CX23888_IR_IRQEN_REG	0x170014
+#define IRQEN_RTE	0x00000001
+#define IRQEN_ROE	0x00000002
+#define IRQEN_RSE	0x00000010
+#define IRQEN_TSE	0x00000020
+
+#define CX23888_IR_FILTR_REG	0x170018
+#define FILTR_LPF	0x0000FFFF
+
+/* This register doesn't follow the pattern; it's 0x23C on a CX23885 */
+#define CX23888_IR_FIFO_REG	0x170040
+#define FIFO_RXTX	0x0000FFFF
+#define FIFO_RXTX_LVL	0x00010000
+#define FIFO_RXTX_RTO	0x0001FFFF
+#define FIFO_RX_NDV	0x00020000
+#define FIFO_RX_DEPTH	8
+#define FIFO_TX_DEPTH	8
+
+/* CX23888 unique registers */
+#define CX23888_IR_SEEDP_REG	0x17001C
+#define CX23888_IR_TIMOL_REG	0x170020
+#define CX23888_IR_WAKE0_REG	0x170024
+#define CX23888_IR_WAKE1_REG	0x170028
+#define CX23888_IR_WAKE2_REG	0x17002C
+#define CX23888_IR_MASK0_REG	0x170030
+#define CX23888_IR_MASK1_REG	0x170034
+#define CX23888_IR_MAKS2_REG	0x170038
+#define CX23888_IR_DPIPG_REG	0x17003C
+#define CX23888_IR_LEARN_REG	0x170044
+
+#define CX23888_VIDCLK_FREQ	108000000 /* 108 MHz, BT.656 */
+#define CX23888_IR_REFCLK_FREQ	(CX23888_VIDCLK_FREQ / 2)
+
+/*
+ * We use this union internally for convenience, but callers to tx_write
+ * and rx_read will be expecting records of type struct ir_raw_event.
+ * Always ensure the size of this union is dictated by struct ir_raw_event.
+ */
+union cx23888_ir_fifo_rec {
+	u32 hw_fifo_data;
+	struct ir_raw_event ir_core_data;
+};
+
+#define CX23888_IR_RX_KFIFO_SIZE    (256 * sizeof(union cx23888_ir_fifo_rec))
+#define CX23888_IR_TX_KFIFO_SIZE    (256 * sizeof(union cx23888_ir_fifo_rec))
+
+struct cx23888_ir_state {
+	struct v4l2_subdev sd;
+	struct cx23885_dev *dev;
+	u32 id;
+	u32 rev;
+
+	struct v4l2_subdev_ir_parameters rx_params;
+	struct mutex rx_params_lock;
+	atomic_t rxclk_divider;
+	atomic_t rx_invert;
+
+	struct kfifo rx_kfifo;
+	spinlock_t rx_kfifo_lock;
+
+	struct v4l2_subdev_ir_parameters tx_params;
+	struct mutex tx_params_lock;
+	atomic_t txclk_divider;
+};
+
+static inline struct cx23888_ir_state *to_state(struct v4l2_subdev *sd)
+{
+	return v4l2_get_subdevdata(sd);
+}
+
+/*
+ * IR register block read and write functions
+ */
+static
+inline int cx23888_ir_write4(struct cx23885_dev *dev, u32 addr, u32 value)
+{
+	cx_write(addr, value);
+	return 0;
+}
+
+static inline u32 cx23888_ir_read4(struct cx23885_dev *dev, u32 addr)
+{
+	return cx_read(addr);
+}
+
+static inline int cx23888_ir_and_or4(struct cx23885_dev *dev, u32 addr,
+				     u32 and_mask, u32 or_value)
+{
+	cx_andor(addr, ~and_mask, or_value);
+	return 0;
+}
+
+/*
+ * Rx and Tx Clock Divider register computations
+ *
+ * Note the largest clock divider value of 0xffff corresponds to:
+ * 	(0xffff + 1) * 1000 / 108/2 MHz = 1,213,629.629... ns
+ * which fits in 21 bits, so we'll use unsigned int for time arguments.
+ */
+static inline u16 count_to_clock_divider(unsigned int d)
+{
+	if (d > RXCLK_RCD + 1)
+		d = RXCLK_RCD;
+	else if (d < 2)
+		d = 1;
+	else
+		d--;
+	return (u16) d;
+}
+
+static inline u16 ns_to_clock_divider(unsigned int ns)
+{
+	return count_to_clock_divider(
+		DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ / 1000000 * ns, 1000));
+}
+
+static inline unsigned int clock_divider_to_ns(unsigned int divider)
+{
+	/* Period of the Rx or Tx clock in ns */
+	return DIV_ROUND_CLOSEST((divider + 1) * 1000,
+				 CX23888_IR_REFCLK_FREQ / 1000000);
+}
+
+static inline u16 carrier_freq_to_clock_divider(unsigned int freq)
+{
+	return count_to_clock_divider(
+			  DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ, freq * 16));
+}
+
+static inline unsigned int clock_divider_to_carrier_freq(unsigned int divider)
+{
+	return DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ, (divider + 1) * 16);
+}
+
+static inline u16 freq_to_clock_divider(unsigned int freq,
+					unsigned int rollovers)
+{
+	return count_to_clock_divider(
+		   DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ, freq * rollovers));
+}
+
+static inline unsigned int clock_divider_to_freq(unsigned int divider,
+						 unsigned int rollovers)
+{
+	return DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ,
+				 (divider + 1) * rollovers);
+}
+
+/*
+ * Low Pass Filter register calculations
+ *
+ * Note the largest count value of 0xffff corresponds to:
+ * 	0xffff * 1000 / 108/2 MHz = 1,213,611.11... ns
+ * which fits in 21 bits, so we'll use unsigned int for time arguments.
+ */
+static inline u16 count_to_lpf_count(unsigned int d)
+{
+	if (d > FILTR_LPF)
+		d = FILTR_LPF;
+	else if (d < 4)
+		d = 0;
+	return (u16) d;
+}
+
+static inline u16 ns_to_lpf_count(unsigned int ns)
+{
+	return count_to_lpf_count(
+		DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ / 1000000 * ns, 1000));
+}
+
+static inline unsigned int lpf_count_to_ns(unsigned int count)
+{
+	/* Duration of the Low Pass Filter rejection window in ns */
+	return DIV_ROUND_CLOSEST(count * 1000,
+				 CX23888_IR_REFCLK_FREQ / 1000000);
+}
+
+static inline unsigned int lpf_count_to_us(unsigned int count)
+{
+	/* Duration of the Low Pass Filter rejection window in us */
+	return DIV_ROUND_CLOSEST(count, CX23888_IR_REFCLK_FREQ / 1000000);
+}
+
+/*
+ * FIFO register pulse width count compuations
+ */
+static u32 clock_divider_to_resolution(u16 divider)
+{
+	/*
+	 * Resolution is the duration of 1 tick of the readable portion of
+	 * of the pulse width counter as read from the FIFO.  The two lsb's are
+	 * not readable, hence the << 2.  This function returns ns.
+	 */
+	return DIV_ROUND_CLOSEST((1 << 2)  * ((u32) divider + 1) * 1000,
+				 CX23888_IR_REFCLK_FREQ / 1000000);
+}
+
+static u64 pulse_width_count_to_ns(u16 count, u16 divider)
+{
+	u64 n;
+	u32 rem;
+
+	/*
+	 * The 2 lsb's of the pulse width timer count are not readable, hence
+	 * the (count << 2) | 0x3
+	 */
+	n = (((u64) count << 2) | 0x3) * (divider + 1) * 1000; /* millicycles */
+	rem = do_div(n, CX23888_IR_REFCLK_FREQ / 1000000);     /* / MHz => ns */
+	if (rem >= CX23888_IR_REFCLK_FREQ / 1000000 / 2)
+		n++;
+	return n;
+}
+
+static unsigned int pulse_width_count_to_us(u16 count, u16 divider)
+{
+	u64 n;
+	u32 rem;
+
+	/*
+	 * The 2 lsb's of the pulse width timer count are not readable, hence
+	 * the (count << 2) | 0x3
+	 */
+	n = (((u64) count << 2) | 0x3) * (divider + 1);    /* cycles      */
+	rem = do_div(n, CX23888_IR_REFCLK_FREQ / 1000000); /* / MHz => us */
+	if (rem >= CX23888_IR_REFCLK_FREQ / 1000000 / 2)
+		n++;
+	return (unsigned int) n;
+}
+
+/*
+ * Pulse Clocks computations: Combined Pulse Width Count & Rx Clock Counts
+ *
+ * The total pulse clock count is an 18 bit pulse width timer count as the most
+ * significant part and (up to) 16 bit clock divider count as a modulus.
+ * When the Rx clock divider ticks down to 0, it increments the 18 bit pulse
+ * width timer count's least significant bit.
+ */
+static u64 ns_to_pulse_clocks(u32 ns)
+{
+	u64 clocks;
+	u32 rem;
+	clocks = CX23888_IR_REFCLK_FREQ / 1000000 * (u64) ns; /* millicycles  */
+	rem = do_div(clocks, 1000);                         /* /1000 = cycles */
+	if (rem >= 1000 / 2)
+		clocks++;
+	return clocks;
+}
+
+static u16 pulse_clocks_to_clock_divider(u64 count)
+{
+	do_div(count, (FIFO_RXTX << 2) | 0x3);
+
+	/* net result needs to be rounded down and decremented by 1 */
+	if (count > RXCLK_RCD + 1)
+		count = RXCLK_RCD;
+	else if (count < 2)
+		count = 1;
+	else
+		count--;
+	return (u16) count;
+}
+
+/*
+ * IR Control Register helpers
+ */
+enum tx_fifo_watermark {
+	TX_FIFO_HALF_EMPTY = 0,
+	TX_FIFO_EMPTY      = CNTRL_TIC,
+};
+
+enum rx_fifo_watermark {
+	RX_FIFO_HALF_FULL = 0,
+	RX_FIFO_NOT_EMPTY = CNTRL_RIC,
+};
+
+static inline void control_tx_irq_watermark(struct cx23885_dev *dev,
+					    enum tx_fifo_watermark level)
+{
+	cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_TIC, level);
+}
+
+static inline void control_rx_irq_watermark(struct cx23885_dev *dev,
+					    enum rx_fifo_watermark level)
+{
+	cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_RIC, level);
+}
+
+static inline void control_tx_enable(struct cx23885_dev *dev, bool enable)
+{
+	cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~(CNTRL_TXE | CNTRL_TFE),
+			   enable ? (CNTRL_TXE | CNTRL_TFE) : 0);
+}
+
+static inline void control_rx_enable(struct cx23885_dev *dev, bool enable)
+{
+	cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~(CNTRL_RXE | CNTRL_RFE),
+			   enable ? (CNTRL_RXE | CNTRL_RFE) : 0);
+}
+
+static inline void control_tx_modulation_enable(struct cx23885_dev *dev,
+						bool enable)
+{
+	cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_MOD,
+			   enable ? CNTRL_MOD : 0);
+}
+
+static inline void control_rx_demodulation_enable(struct cx23885_dev *dev,
+						  bool enable)
+{
+	cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_DMD,
+			   enable ? CNTRL_DMD : 0);
+}
+
+static inline void control_rx_s_edge_detection(struct cx23885_dev *dev,
+					       u32 edge_types)
+{
+	cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_EDG_BOTH,
+			   edge_types & CNTRL_EDG_BOTH);
+}
+
+static void control_rx_s_carrier_window(struct cx23885_dev *dev,
+					unsigned int carrier,
+					unsigned int *carrier_range_low,
+					unsigned int *carrier_range_high)
+{
+	u32 v;
+	unsigned int c16 = carrier * 16;
+
+	if (*carrier_range_low < DIV_ROUND_CLOSEST(c16, 16 + 3)) {
+		v = CNTRL_WIN_3_4;
+		*carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 4);
+	} else {
+		v = CNTRL_WIN_3_3;
+		*carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 3);
+	}
+
+	if (*carrier_range_high > DIV_ROUND_CLOSEST(c16, 16 - 3)) {
+		v |= CNTRL_WIN_4_3;
+		*carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 4);
+	} else {
+		v |= CNTRL_WIN_3_3;
+		*carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 3);
+	}
+	cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_WIN, v);
+}
+
+static inline void control_tx_polarity_invert(struct cx23885_dev *dev,
+					      bool invert)
+{
+	cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_CPL,
+			   invert ? CNTRL_CPL : 0);
+}
+
+static inline void control_tx_level_invert(struct cx23885_dev *dev,
+					  bool invert)
+{
+	cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_IVO,
+			   invert ? CNTRL_IVO : 0);
+}
+
+/*
+ * IR Rx & Tx Clock Register helpers
+ */
+static unsigned int txclk_tx_s_carrier(struct cx23885_dev *dev,
+				       unsigned int freq,
+				       u16 *divider)
+{
+	*divider = carrier_freq_to_clock_divider(freq);
+	cx23888_ir_write4(dev, CX23888_IR_TXCLK_REG, *divider);
+	return clock_divider_to_carrier_freq(*divider);
+}
+
+static unsigned int rxclk_rx_s_carrier(struct cx23885_dev *dev,
+				       unsigned int freq,
+				       u16 *divider)
+{
+	*divider = carrier_freq_to_clock_divider(freq);
+	cx23888_ir_write4(dev, CX23888_IR_RXCLK_REG, *divider);
+	return clock_divider_to_carrier_freq(*divider);
+}
+
+static u32 txclk_tx_s_max_pulse_width(struct cx23885_dev *dev, u32 ns,
+				      u16 *divider)
+{
+	u64 pulse_clocks;
+
+	if (ns > IR_MAX_DURATION)
+		ns = IR_MAX_DURATION;
+	pulse_clocks = ns_to_pulse_clocks(ns);
+	*divider = pulse_clocks_to_clock_divider(pulse_clocks);
+	cx23888_ir_write4(dev, CX23888_IR_TXCLK_REG, *divider);
+	return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider);
+}
+
+static u32 rxclk_rx_s_max_pulse_width(struct cx23885_dev *dev, u32 ns,
+				      u16 *divider)
+{
+	u64 pulse_clocks;
+
+	if (ns > IR_MAX_DURATION)
+		ns = IR_MAX_DURATION;
+	pulse_clocks = ns_to_pulse_clocks(ns);
+	*divider = pulse_clocks_to_clock_divider(pulse_clocks);
+	cx23888_ir_write4(dev, CX23888_IR_RXCLK_REG, *divider);
+	return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider);
+}
+
+/*
+ * IR Tx Carrier Duty Cycle register helpers
+ */
+static unsigned int cduty_tx_s_duty_cycle(struct cx23885_dev *dev,
+					  unsigned int duty_cycle)
+{
+	u32 n;
+	n = DIV_ROUND_CLOSEST(duty_cycle * 100, 625); /* 16ths of 100% */
+	if (n != 0)
+		n--;
+	if (n > 15)
+		n = 15;
+	cx23888_ir_write4(dev, CX23888_IR_CDUTY_REG, n);
+	return DIV_ROUND_CLOSEST((n + 1) * 100, 16);
+}
+
+/*
+ * IR Filter Register helpers
+ */
+static u32 filter_rx_s_min_width(struct cx23885_dev *dev, u32 min_width_ns)
+{
+	u32 count = ns_to_lpf_count(min_width_ns);
+	cx23888_ir_write4(dev, CX23888_IR_FILTR_REG, count);
+	return lpf_count_to_ns(count);
+}
+
+/*
+ * IR IRQ Enable Register helpers
+ */
+static inline void irqenable_rx(struct cx23885_dev *dev, u32 mask)
+{
+	mask &= (IRQEN_RTE | IRQEN_ROE | IRQEN_RSE);
+	cx23888_ir_and_or4(dev, CX23888_IR_IRQEN_REG,
+			   ~(IRQEN_RTE | IRQEN_ROE | IRQEN_RSE), mask);
+}
+
+static inline void irqenable_tx(struct cx23885_dev *dev, u32 mask)
+{
+	mask &= IRQEN_TSE;
+	cx23888_ir_and_or4(dev, CX23888_IR_IRQEN_REG, ~IRQEN_TSE, mask);
+}
+
+/*
+ * V4L2 Subdevice IR Ops
+ */
+static int cx23888_ir_irq_handler(struct v4l2_subdev *sd, u32 status,
+				  bool *handled)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	struct cx23885_dev *dev = state->dev;
+	unsigned long flags;
+
+	u32 cntrl = cx23888_ir_read4(dev, CX23888_IR_CNTRL_REG);
+	u32 irqen = cx23888_ir_read4(dev, CX23888_IR_IRQEN_REG);
+	u32 stats = cx23888_ir_read4(dev, CX23888_IR_STATS_REG);
+
+	union cx23888_ir_fifo_rec rx_data[FIFO_RX_DEPTH];
+	unsigned int i, j, k;
+	u32 events, v;
+	int tsr, rsr, rto, ror, tse, rse, rte, roe, kror;
+
+	tsr = stats & STATS_TSR; /* Tx FIFO Service Request */
+	rsr = stats & STATS_RSR; /* Rx FIFO Service Request */
+	rto = stats & STATS_RTO; /* Rx Pulse Width Timer Time Out */
+	ror = stats & STATS_ROR; /* Rx FIFO Over Run */
+
+	tse = irqen & IRQEN_TSE; /* Tx FIFO Service Request IRQ Enable */
+	rse = irqen & IRQEN_RSE; /* Rx FIFO Service Reuqest IRQ Enable */
+	rte = irqen & IRQEN_RTE; /* Rx Pulse Width Timer Time Out IRQ Enable */
+	roe = irqen & IRQEN_ROE; /* Rx FIFO Over Run IRQ Enable */
+
+	*handled = false;
+	v4l2_dbg(2, ir_888_debug, sd, "IRQ Status:  %s %s %s %s %s %s\n",
+		 tsr ? "tsr" : "   ", rsr ? "rsr" : "   ",
+		 rto ? "rto" : "   ", ror ? "ror" : "   ",
+		 stats & STATS_TBY ? "tby" : "   ",
+		 stats & STATS_RBY ? "rby" : "   ");
+
+	v4l2_dbg(2, ir_888_debug, sd, "IRQ Enables: %s %s %s %s\n",
+		 tse ? "tse" : "   ", rse ? "rse" : "   ",
+		 rte ? "rte" : "   ", roe ? "roe" : "   ");
+
+	/*
+	 * Transmitter interrupt service
+	 */
+	if (tse && tsr) {
+		/*
+		 * TODO:
+		 * Check the watermark threshold setting
+		 * Pull FIFO_TX_DEPTH or FIFO_TX_DEPTH/2 entries from tx_kfifo
+		 * Push the data to the hardware FIFO.
+		 * If there was nothing more to send in the tx_kfifo, disable
+		 *	the TSR IRQ and notify the v4l2_device.
+		 * If there was something in the tx_kfifo, check the tx_kfifo
+		 *      level and notify the v4l2_device, if it is low.
+		 */
+		/* For now, inhibit TSR interrupt until Tx is implemented */
+		irqenable_tx(dev, 0);
+		events = V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ;
+		v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_TX_NOTIFY, &events);
+		*handled = true;
+	}
+
+	/*
+	 * Receiver interrupt service
+	 */
+	kror = 0;
+	if ((rse && rsr) || (rte && rto)) {
+		/*
+		 * Receive data on RSR to clear the STATS_RSR.
+		 * Receive data on RTO, since we may not have yet hit the RSR
+		 * watermark when we receive the RTO.
+		 */
+		for (i = 0, v = FIFO_RX_NDV;
+		     (v & FIFO_RX_NDV) && !kror; i = 0) {
+			for (j = 0;
+			     (v & FIFO_RX_NDV) && j < FIFO_RX_DEPTH; j++) {
+				v = cx23888_ir_read4(dev, CX23888_IR_FIFO_REG);
+				rx_data[i].hw_fifo_data = v & ~FIFO_RX_NDV;
+				i++;
+			}
+			if (i == 0)
+				break;
+			j = i * sizeof(union cx23888_ir_fifo_rec);
+			k = kfifo_in_locked(&state->rx_kfifo,
+				      (unsigned char *) rx_data, j,
+				      &state->rx_kfifo_lock);
+			if (k != j)
+				kror++; /* rx_kfifo over run */
+		}
+		*handled = true;
+	}
+
+	events = 0;
+	v = 0;
+	if (kror) {
+		events |= V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN;
+		v4l2_err(sd, "IR receiver software FIFO overrun\n");
+	}
+	if (roe && ror) {
+		/*
+		 * The RX FIFO Enable (CNTRL_RFE) must be toggled to clear
+		 * the Rx FIFO Over Run status (STATS_ROR)
+		 */
+		v |= CNTRL_RFE;
+		events |= V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN;
+		v4l2_err(sd, "IR receiver hardware FIFO overrun\n");
+	}
+	if (rte && rto) {
+		/*
+		 * The IR Receiver Enable (CNTRL_RXE) must be toggled to clear
+		 * the Rx Pulse Width Timer Time Out (STATS_RTO)
+		 */
+		v |= CNTRL_RXE;
+		events |= V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED;
+	}
+	if (v) {
+		/* Clear STATS_ROR & STATS_RTO as needed by reseting hardware */
+		cx23888_ir_write4(dev, CX23888_IR_CNTRL_REG, cntrl & ~v);
+		cx23888_ir_write4(dev, CX23888_IR_CNTRL_REG, cntrl);
+		*handled = true;
+	}
+
+	spin_lock_irqsave(&state->rx_kfifo_lock, flags);
+	if (kfifo_len(&state->rx_kfifo) >= CX23888_IR_RX_KFIFO_SIZE / 2)
+		events |= V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ;
+	spin_unlock_irqrestore(&state->rx_kfifo_lock, flags);
+
+	if (events)
+		v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_RX_NOTIFY, &events);
+	return 0;
+}
+
+/* Receiver */
+static int cx23888_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count,
+			      ssize_t *num)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	bool invert = (bool) atomic_read(&state->rx_invert);
+	u16 divider = (u16) atomic_read(&state->rxclk_divider);
+
+	unsigned int i, n;
+	union cx23888_ir_fifo_rec *p;
+	unsigned u, v, w;
+
+	n = count / sizeof(union cx23888_ir_fifo_rec)
+		* sizeof(union cx23888_ir_fifo_rec);
+	if (n == 0) {
+		*num = 0;
+		return 0;
+	}
+
+	n = kfifo_out_locked(&state->rx_kfifo, buf, n, &state->rx_kfifo_lock);
+
+	n /= sizeof(union cx23888_ir_fifo_rec);
+	*num = n * sizeof(union cx23888_ir_fifo_rec);
+
+	for (p = (union cx23888_ir_fifo_rec *) buf, i = 0; i < n; p++, i++) {
+
+		if ((p->hw_fifo_data & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
+			/* Assume RTO was because of no IR light input */
+			u = 0;
+			w = 1;
+		} else {
+			u = (p->hw_fifo_data & FIFO_RXTX_LVL) ? 1 : 0;
+			if (invert)
+				u = u ? 0 : 1;
+			w = 0;
+		}
+
+		v = (unsigned) pulse_width_count_to_ns(
+				  (u16) (p->hw_fifo_data & FIFO_RXTX), divider);
+		if (v > IR_MAX_DURATION)
+			v = IR_MAX_DURATION;
+
+		init_ir_raw_event(&p->ir_core_data);
+		p->ir_core_data.pulse = u;
+		p->ir_core_data.duration = v;
+		p->ir_core_data.timeout = w;
+
+		v4l2_dbg(2, ir_888_debug, sd, "rx read: %10u ns  %s  %s\n",
+			 v, u ? "mark" : "space", w ? "(timed out)" : "");
+		if (w)
+			v4l2_dbg(2, ir_888_debug, sd, "rx read: end of rx\n");
+	}
+	return 0;
+}
+
+static int cx23888_ir_rx_g_parameters(struct v4l2_subdev *sd,
+				      struct v4l2_subdev_ir_parameters *p)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	mutex_lock(&state->rx_params_lock);
+	memcpy(p, &state->rx_params, sizeof(struct v4l2_subdev_ir_parameters));
+	mutex_unlock(&state->rx_params_lock);
+	return 0;
+}
+
+static int cx23888_ir_rx_shutdown(struct v4l2_subdev *sd)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	struct cx23885_dev *dev = state->dev;
+
+	mutex_lock(&state->rx_params_lock);
+
+	/* Disable or slow down all IR Rx circuits and counters */
+	irqenable_rx(dev, 0);
+	control_rx_enable(dev, false);
+	control_rx_demodulation_enable(dev, false);
+	control_rx_s_edge_detection(dev, CNTRL_EDG_NONE);
+	filter_rx_s_min_width(dev, 0);
+	cx23888_ir_write4(dev, CX23888_IR_RXCLK_REG, RXCLK_RCD);
+
+	state->rx_params.shutdown = true;
+
+	mutex_unlock(&state->rx_params_lock);
+	return 0;
+}
+
+static int cx23888_ir_rx_s_parameters(struct v4l2_subdev *sd,
+				      struct v4l2_subdev_ir_parameters *p)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	struct cx23885_dev *dev = state->dev;
+	struct v4l2_subdev_ir_parameters *o = &state->rx_params;
+	u16 rxclk_divider;
+
+	if (p->shutdown)
+		return cx23888_ir_rx_shutdown(sd);
+
+	if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH)
+		return -ENOSYS;
+
+	mutex_lock(&state->rx_params_lock);
+
+	o->shutdown = p->shutdown;
+
+	o->mode = p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+
+	o->bytes_per_data_element = p->bytes_per_data_element
+				  = sizeof(union cx23888_ir_fifo_rec);
+
+	/* Before we tweak the hardware, we have to disable the receiver */
+	irqenable_rx(dev, 0);
+	control_rx_enable(dev, false);
+
+	control_rx_demodulation_enable(dev, p->modulation);
+	o->modulation = p->modulation;
+
+	if (p->modulation) {
+		p->carrier_freq = rxclk_rx_s_carrier(dev, p->carrier_freq,
+						     &rxclk_divider);
+
+		o->carrier_freq = p->carrier_freq;
+
+		o->duty_cycle = p->duty_cycle = 50;
+
+		control_rx_s_carrier_window(dev, p->carrier_freq,
+					    &p->carrier_range_lower,
+					    &p->carrier_range_upper);
+		o->carrier_range_lower = p->carrier_range_lower;
+		o->carrier_range_upper = p->carrier_range_upper;
+
+		p->max_pulse_width =
+			(u32) pulse_width_count_to_ns(FIFO_RXTX, rxclk_divider);
+	} else {
+		p->max_pulse_width =
+			    rxclk_rx_s_max_pulse_width(dev, p->max_pulse_width,
+						       &rxclk_divider);
+	}
+	o->max_pulse_width = p->max_pulse_width;
+	atomic_set(&state->rxclk_divider, rxclk_divider);
+
+	p->noise_filter_min_width =
+			  filter_rx_s_min_width(dev, p->noise_filter_min_width);
+	o->noise_filter_min_width = p->noise_filter_min_width;
+
+	p->resolution = clock_divider_to_resolution(rxclk_divider);
+	o->resolution = p->resolution;
+
+	/* FIXME - make this dependent on resolution for better performance */
+	control_rx_irq_watermark(dev, RX_FIFO_HALF_FULL);
+
+	control_rx_s_edge_detection(dev, CNTRL_EDG_BOTH);
+
+	o->invert_level = p->invert_level;
+	atomic_set(&state->rx_invert, p->invert_level);
+
+	o->interrupt_enable = p->interrupt_enable;
+	o->enable = p->enable;
+	if (p->enable) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&state->rx_kfifo_lock, flags);
+		kfifo_reset(&state->rx_kfifo);
+		/* reset tx_fifo too if there is one... */
+		spin_unlock_irqrestore(&state->rx_kfifo_lock, flags);
+		if (p->interrupt_enable)
+			irqenable_rx(dev, IRQEN_RSE | IRQEN_RTE | IRQEN_ROE);
+		control_rx_enable(dev, p->enable);
+	}
+
+	mutex_unlock(&state->rx_params_lock);
+	return 0;
+}
+
+/* Transmitter */
+static int cx23888_ir_tx_write(struct v4l2_subdev *sd, u8 *buf, size_t count,
+			       ssize_t *num)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	struct cx23885_dev *dev = state->dev;
+	/* For now enable the Tx FIFO Service interrupt & pretend we did work */
+	irqenable_tx(dev, IRQEN_TSE);
+	*num = count;
+	return 0;
+}
+
+static int cx23888_ir_tx_g_parameters(struct v4l2_subdev *sd,
+				      struct v4l2_subdev_ir_parameters *p)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	mutex_lock(&state->tx_params_lock);
+	memcpy(p, &state->tx_params, sizeof(struct v4l2_subdev_ir_parameters));
+	mutex_unlock(&state->tx_params_lock);
+	return 0;
+}
+
+static int cx23888_ir_tx_shutdown(struct v4l2_subdev *sd)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	struct cx23885_dev *dev = state->dev;
+
+	mutex_lock(&state->tx_params_lock);
+
+	/* Disable or slow down all IR Tx circuits and counters */
+	irqenable_tx(dev, 0);
+	control_tx_enable(dev, false);
+	control_tx_modulation_enable(dev, false);
+	cx23888_ir_write4(dev, CX23888_IR_TXCLK_REG, TXCLK_TCD);
+
+	state->tx_params.shutdown = true;
+
+	mutex_unlock(&state->tx_params_lock);
+	return 0;
+}
+
+static int cx23888_ir_tx_s_parameters(struct v4l2_subdev *sd,
+				      struct v4l2_subdev_ir_parameters *p)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	struct cx23885_dev *dev = state->dev;
+	struct v4l2_subdev_ir_parameters *o = &state->tx_params;
+	u16 txclk_divider;
+
+	if (p->shutdown)
+		return cx23888_ir_tx_shutdown(sd);
+
+	if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH)
+		return -ENOSYS;
+
+	mutex_lock(&state->tx_params_lock);
+
+	o->shutdown = p->shutdown;
+
+	o->mode = p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+
+	o->bytes_per_data_element = p->bytes_per_data_element
+				  = sizeof(union cx23888_ir_fifo_rec);
+
+	/* Before we tweak the hardware, we have to disable the transmitter */
+	irqenable_tx(dev, 0);
+	control_tx_enable(dev, false);
+
+	control_tx_modulation_enable(dev, p->modulation);
+	o->modulation = p->modulation;
+
+	if (p->modulation) {
+		p->carrier_freq = txclk_tx_s_carrier(dev, p->carrier_freq,
+						     &txclk_divider);
+		o->carrier_freq = p->carrier_freq;
+
+		p->duty_cycle = cduty_tx_s_duty_cycle(dev, p->duty_cycle);
+		o->duty_cycle = p->duty_cycle;
+
+		p->max_pulse_width =
+			(u32) pulse_width_count_to_ns(FIFO_RXTX, txclk_divider);
+	} else {
+		p->max_pulse_width =
+			    txclk_tx_s_max_pulse_width(dev, p->max_pulse_width,
+						       &txclk_divider);
+	}
+	o->max_pulse_width = p->max_pulse_width;
+	atomic_set(&state->txclk_divider, txclk_divider);
+
+	p->resolution = clock_divider_to_resolution(txclk_divider);
+	o->resolution = p->resolution;
+
+	/* FIXME - make this dependent on resolution for better performance */
+	control_tx_irq_watermark(dev, TX_FIFO_HALF_EMPTY);
+
+	control_tx_polarity_invert(dev, p->invert_carrier_sense);
+	o->invert_carrier_sense = p->invert_carrier_sense;
+
+	control_tx_level_invert(dev, p->invert_level);
+	o->invert_level = p->invert_level;
+
+	o->interrupt_enable = p->interrupt_enable;
+	o->enable = p->enable;
+	if (p->enable) {
+		if (p->interrupt_enable)
+			irqenable_tx(dev, IRQEN_TSE);
+		control_tx_enable(dev, p->enable);
+	}
+
+	mutex_unlock(&state->tx_params_lock);
+	return 0;
+}
+
+
+/*
+ * V4L2 Subdevice Core Ops
+ */
+static int cx23888_ir_log_status(struct v4l2_subdev *sd)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	struct cx23885_dev *dev = state->dev;
+	char *s;
+	int i, j;
+
+	u32 cntrl = cx23888_ir_read4(dev, CX23888_IR_CNTRL_REG);
+	u32 txclk = cx23888_ir_read4(dev, CX23888_IR_TXCLK_REG) & TXCLK_TCD;
+	u32 rxclk = cx23888_ir_read4(dev, CX23888_IR_RXCLK_REG) & RXCLK_RCD;
+	u32 cduty = cx23888_ir_read4(dev, CX23888_IR_CDUTY_REG) & CDUTY_CDC;
+	u32 stats = cx23888_ir_read4(dev, CX23888_IR_STATS_REG);
+	u32 irqen = cx23888_ir_read4(dev, CX23888_IR_IRQEN_REG);
+	u32 filtr = cx23888_ir_read4(dev, CX23888_IR_FILTR_REG) & FILTR_LPF;
+
+	v4l2_info(sd, "IR Receiver:\n");
+	v4l2_info(sd, "\tEnabled:                           %s\n",
+		  cntrl & CNTRL_RXE ? "yes" : "no");
+	v4l2_info(sd, "\tDemodulation from a carrier:       %s\n",
+		  cntrl & CNTRL_DMD ? "enabled" : "disabled");
+	v4l2_info(sd, "\tFIFO:                              %s\n",
+		  cntrl & CNTRL_RFE ? "enabled" : "disabled");
+	switch (cntrl & CNTRL_EDG) {
+	case CNTRL_EDG_NONE:
+		s = "disabled";
+		break;
+	case CNTRL_EDG_FALL:
+		s = "falling edge";
+		break;
+	case CNTRL_EDG_RISE:
+		s = "rising edge";
+		break;
+	case CNTRL_EDG_BOTH:
+		s = "rising & falling edges";
+		break;
+	default:
+		s = "??? edge";
+		break;
+	}
+	v4l2_info(sd, "\tPulse timers' start/stop trigger:  %s\n", s);
+	v4l2_info(sd, "\tFIFO data on pulse timer overflow: %s\n",
+		  cntrl & CNTRL_R ? "not loaded" : "overflow marker");
+	v4l2_info(sd, "\tFIFO interrupt watermark:          %s\n",
+		  cntrl & CNTRL_RIC ? "not empty" : "half full or greater");
+	v4l2_info(sd, "\tLoopback mode:                     %s\n",
+		  cntrl & CNTRL_LBM ? "loopback active" : "normal receive");
+	if (cntrl & CNTRL_DMD) {
+		v4l2_info(sd, "\tExpected carrier (16 clocks):      %u Hz\n",
+			  clock_divider_to_carrier_freq(rxclk));
+		switch (cntrl & CNTRL_WIN) {
+		case CNTRL_WIN_3_3:
+			i = 3;
+			j = 3;
+			break;
+		case CNTRL_WIN_4_3:
+			i = 4;
+			j = 3;
+			break;
+		case CNTRL_WIN_3_4:
+			i = 3;
+			j = 4;
+			break;
+		case CNTRL_WIN_4_4:
+			i = 4;
+			j = 4;
+			break;
+		default:
+			i = 0;
+			j = 0;
+			break;
+		}
+		v4l2_info(sd, "\tNext carrier edge window:          16 clocks "
+			  "-%1d/+%1d, %u to %u Hz\n", i, j,
+			  clock_divider_to_freq(rxclk, 16 + j),
+			  clock_divider_to_freq(rxclk, 16 - i));
+	}
+	v4l2_info(sd, "\tMax measurable pulse width:        %u us, %llu ns\n",
+		  pulse_width_count_to_us(FIFO_RXTX, rxclk),
+		  pulse_width_count_to_ns(FIFO_RXTX, rxclk));
+	v4l2_info(sd, "\tLow pass filter:                   %s\n",
+		  filtr ? "enabled" : "disabled");
+	if (filtr)
+		v4l2_info(sd, "\tMin acceptable pulse width (LPF):  %u us, "
+			  "%u ns\n",
+			  lpf_count_to_us(filtr),
+			  lpf_count_to_ns(filtr));
+	v4l2_info(sd, "\tPulse width timer timed-out:       %s\n",
+		  stats & STATS_RTO ? "yes" : "no");
+	v4l2_info(sd, "\tPulse width timer time-out intr:   %s\n",
+		  irqen & IRQEN_RTE ? "enabled" : "disabled");
+	v4l2_info(sd, "\tFIFO overrun:                      %s\n",
+		  stats & STATS_ROR ? "yes" : "no");
+	v4l2_info(sd, "\tFIFO overrun interrupt:            %s\n",
+		  irqen & IRQEN_ROE ? "enabled" : "disabled");
+	v4l2_info(sd, "\tBusy:                              %s\n",
+		  stats & STATS_RBY ? "yes" : "no");
+	v4l2_info(sd, "\tFIFO service requested:            %s\n",
+		  stats & STATS_RSR ? "yes" : "no");
+	v4l2_info(sd, "\tFIFO service request interrupt:    %s\n",
+		  irqen & IRQEN_RSE ? "enabled" : "disabled");
+
+	v4l2_info(sd, "IR Transmitter:\n");
+	v4l2_info(sd, "\tEnabled:                           %s\n",
+		  cntrl & CNTRL_TXE ? "yes" : "no");
+	v4l2_info(sd, "\tModulation onto a carrier:         %s\n",
+		  cntrl & CNTRL_MOD ? "enabled" : "disabled");
+	v4l2_info(sd, "\tFIFO:                              %s\n",
+		  cntrl & CNTRL_TFE ? "enabled" : "disabled");
+	v4l2_info(sd, "\tFIFO interrupt watermark:          %s\n",
+		  cntrl & CNTRL_TIC ? "not empty" : "half full or less");
+	v4l2_info(sd, "\tOutput pin level inversion         %s\n",
+		  cntrl & CNTRL_IVO ? "yes" : "no");
+	v4l2_info(sd, "\tCarrier polarity:                  %s\n",
+		  cntrl & CNTRL_CPL ? "space:burst mark:noburst"
+				    : "space:noburst mark:burst");
+	if (cntrl & CNTRL_MOD) {
+		v4l2_info(sd, "\tCarrier (16 clocks):               %u Hz\n",
+			  clock_divider_to_carrier_freq(txclk));
+		v4l2_info(sd, "\tCarrier duty cycle:                %2u/16\n",
+			  cduty + 1);
+	}
+	v4l2_info(sd, "\tMax pulse width:                   %u us, %llu ns\n",
+		  pulse_width_count_to_us(FIFO_RXTX, txclk),
+		  pulse_width_count_to_ns(FIFO_RXTX, txclk));
+	v4l2_info(sd, "\tBusy:                              %s\n",
+		  stats & STATS_TBY ? "yes" : "no");
+	v4l2_info(sd, "\tFIFO service requested:            %s\n",
+		  stats & STATS_TSR ? "yes" : "no");
+	v4l2_info(sd, "\tFIFO service request interrupt:    %s\n",
+		  irqen & IRQEN_TSE ? "enabled" : "disabled");
+
+	return 0;
+}
+
+static inline int cx23888_ir_dbg_match(const struct v4l2_dbg_match *match)
+{
+	return match->type == V4L2_CHIP_MATCH_HOST && match->addr == 2;
+}
+
+static int cx23888_ir_g_chip_ident(struct v4l2_subdev *sd,
+				   struct v4l2_dbg_chip_ident *chip)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+
+	if (cx23888_ir_dbg_match(&chip->match)) {
+		chip->ident = state->id;
+		chip->revision = state->rev;
+	}
+	return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int cx23888_ir_g_register(struct v4l2_subdev *sd,
+				 struct v4l2_dbg_register *reg)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	u32 addr = CX23888_IR_REG_BASE + (u32) reg->reg;
+
+	if (!cx23888_ir_dbg_match(&reg->match))
+		return -EINVAL;
+	if ((addr & 0x3) != 0)
+		return -EINVAL;
+	if (addr < CX23888_IR_CNTRL_REG || addr > CX23888_IR_LEARN_REG)
+		return -EINVAL;
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	reg->size = 4;
+	reg->val = cx23888_ir_read4(state->dev, addr);
+	return 0;
+}
+
+static int cx23888_ir_s_register(struct v4l2_subdev *sd,
+				 struct v4l2_dbg_register *reg)
+{
+	struct cx23888_ir_state *state = to_state(sd);
+	u32 addr = CX23888_IR_REG_BASE + (u32) reg->reg;
+
+	if (!cx23888_ir_dbg_match(&reg->match))
+		return -EINVAL;
+	if ((addr & 0x3) != 0)
+		return -EINVAL;
+	if (addr < CX23888_IR_CNTRL_REG || addr > CX23888_IR_LEARN_REG)
+		return -EINVAL;
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	cx23888_ir_write4(state->dev, addr, reg->val);
+	return 0;
+}
+#endif
+
+static const struct v4l2_subdev_core_ops cx23888_ir_core_ops = {
+	.g_chip_ident = cx23888_ir_g_chip_ident,
+	.log_status = cx23888_ir_log_status,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register = cx23888_ir_g_register,
+	.s_register = cx23888_ir_s_register,
+#endif
+	.interrupt_service_routine = cx23888_ir_irq_handler,
+};
+
+static const struct v4l2_subdev_ir_ops cx23888_ir_ir_ops = {
+	.rx_read = cx23888_ir_rx_read,
+	.rx_g_parameters = cx23888_ir_rx_g_parameters,
+	.rx_s_parameters = cx23888_ir_rx_s_parameters,
+
+	.tx_write = cx23888_ir_tx_write,
+	.tx_g_parameters = cx23888_ir_tx_g_parameters,
+	.tx_s_parameters = cx23888_ir_tx_s_parameters,
+};
+
+static const struct v4l2_subdev_ops cx23888_ir_controller_ops = {
+	.core = &cx23888_ir_core_ops,
+	.ir = &cx23888_ir_ir_ops,
+};
+
+static const struct v4l2_subdev_ir_parameters default_rx_params = {
+	.bytes_per_data_element = sizeof(union cx23888_ir_fifo_rec),
+	.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
+
+	.enable = false,
+	.interrupt_enable = false,
+	.shutdown = true,
+
+	.modulation = true,
+	.carrier_freq = 36000, /* 36 kHz - RC-5, RC-6, and RC-6A carrier */
+
+	/* RC-5:    666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */
+	/* RC-6A:   333,333 ns = 1/36 kHz * 16 cycles * 1 mark * 0.75 */
+	.noise_filter_min_width = 333333, /* ns */
+	.carrier_range_lower = 35000,
+	.carrier_range_upper = 37000,
+	.invert_level = false,
+};
+
+static const struct v4l2_subdev_ir_parameters default_tx_params = {
+	.bytes_per_data_element = sizeof(union cx23888_ir_fifo_rec),
+	.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
+
+	.enable = false,
+	.interrupt_enable = false,
+	.shutdown = true,
+
+	.modulation = true,
+	.carrier_freq = 36000, /* 36 kHz - RC-5 carrier */
+	.duty_cycle = 25,      /* 25 %   - RC-5 carrier */
+	.invert_level = false,
+	.invert_carrier_sense = false,
+};
+
+int cx23888_ir_probe(struct cx23885_dev *dev)
+{
+	struct cx23888_ir_state *state;
+	struct v4l2_subdev *sd;
+	struct v4l2_subdev_ir_parameters default_params;
+	int ret;
+
+	state = kzalloc(sizeof(struct cx23888_ir_state), GFP_KERNEL);
+	if (state == NULL)
+		return -ENOMEM;
+
+	spin_lock_init(&state->rx_kfifo_lock);
+	if (kfifo_alloc(&state->rx_kfifo, CX23888_IR_RX_KFIFO_SIZE, GFP_KERNEL))
+		return -ENOMEM;
+
+	state->dev = dev;
+	state->id = V4L2_IDENT_CX23888_IR;
+	state->rev = 0;
+	sd = &state->sd;
+
+	v4l2_subdev_init(sd, &cx23888_ir_controller_ops);
+	v4l2_set_subdevdata(sd, state);
+	/* FIXME - fix the formatting of dev->v4l2_dev.name and use it */
+	snprintf(sd->name, sizeof(sd->name), "%s/888-ir", dev->name);
+	sd->grp_id = CX23885_HW_888_IR;
+
+	ret = v4l2_device_register_subdev(&dev->v4l2_dev, sd);
+	if (ret == 0) {
+		/*
+		 * Ensure no interrupts arrive from '888 specific conditions,
+		 * since we ignore them in this driver to have commonality with
+		 * similar IR controller cores.
+		 */
+		cx23888_ir_write4(dev, CX23888_IR_IRQEN_REG, 0);
+
+		mutex_init(&state->rx_params_lock);
+		memcpy(&default_params, &default_rx_params,
+		       sizeof(struct v4l2_subdev_ir_parameters));
+		v4l2_subdev_call(sd, ir, rx_s_parameters, &default_params);
+
+		mutex_init(&state->tx_params_lock);
+		memcpy(&default_params, &default_tx_params,
+		       sizeof(struct v4l2_subdev_ir_parameters));
+		v4l2_subdev_call(sd, ir, tx_s_parameters, &default_params);
+	} else {
+		kfifo_free(&state->rx_kfifo);
+	}
+	return ret;
+}
+
+int cx23888_ir_remove(struct cx23885_dev *dev)
+{
+	struct v4l2_subdev *sd;
+	struct cx23888_ir_state *state;
+
+	sd = cx23885_find_hw(dev, CX23885_HW_888_IR);
+	if (sd == NULL)
+		return -ENODEV;
+
+	cx23888_ir_rx_shutdown(sd);
+	cx23888_ir_tx_shutdown(sd);
+
+	state = to_state(sd);
+	v4l2_device_unregister_subdev(sd);
+	kfifo_free(&state->rx_kfifo);
+	kfree(state);
+	/* Nothing more to free() as state held the actual v4l2_subdev object */
+	return 0;
+}
diff --git a/drivers/media/pci/cx23885/cx23888-ir.h b/drivers/media/pci/cx23885/cx23888-ir.h
new file mode 100644
index 0000000..d2de41c
--- /dev/null
+++ b/drivers/media/pci/cx23885/cx23888-ir.h
@@ -0,0 +1,28 @@
+/*
+ *  Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ *  CX23888 Integrated Consumer Infrared Controller
+ *
+ *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ */
+
+#ifndef _CX23888_IR_H_
+#define _CX23888_IR_H_
+int cx23888_ir_probe(struct cx23885_dev *dev);
+int cx23888_ir_remove(struct cx23885_dev *dev);
+#endif
diff --git a/drivers/media/pci/cx23885/netup-eeprom.c b/drivers/media/pci/cx23885/netup-eeprom.c
new file mode 100644
index 0000000..98a48f5
--- /dev/null
+++ b/drivers/media/pci/cx23885/netup-eeprom.c
@@ -0,0 +1,107 @@
+
+/*
+ * netup-eeprom.c
+ *
+ * 24LC02 EEPROM driver in conjunction with NetUP Dual DVB-S2 CI card
+ *
+ * Copyright (C) 2009 NetUP Inc.
+ * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#
+#include "cx23885.h"
+#include "netup-eeprom.h"
+
+#define EEPROM_I2C_ADDR 0x50
+
+int netup_eeprom_read(struct i2c_adapter *i2c_adap, u8 addr)
+{
+	int ret;
+	unsigned char buf[2];
+
+	/* Read from EEPROM */
+	struct i2c_msg msg[] = {
+		{
+			.addr	= EEPROM_I2C_ADDR,
+			.flags	= 0,
+			.buf	= &buf[0],
+			.len	= 1
+		}, {
+			.addr	= EEPROM_I2C_ADDR,
+			.flags	= I2C_M_RD,
+			.buf	= &buf[1],
+			.len	= 1
+		}
+
+	};
+
+	buf[0] = addr;
+	buf[1] = 0x0;
+
+	ret = i2c_transfer(i2c_adap, msg, 2);
+
+	if (ret != 2) {
+		printk(KERN_ERR "eeprom i2c read error, status=%d\n", ret);
+		return -1;
+	}
+
+	return buf[1];
+};
+
+int netup_eeprom_write(struct i2c_adapter *i2c_adap, u8 addr, u8 data)
+{
+	int ret;
+	unsigned char bufw[2];
+
+	/* Write into EEPROM */
+	struct i2c_msg msg[] = {
+		{
+			.addr	= EEPROM_I2C_ADDR,
+			.flags	= 0,
+			.buf	= &bufw[0],
+			.len	= 2
+		}
+	};
+
+	bufw[0] = addr;
+	bufw[1] = data;
+
+	ret = i2c_transfer(i2c_adap, msg, 1);
+
+	if (ret != 1) {
+		printk(KERN_ERR "eeprom i2c write error, status=%d\n", ret);
+		return -1;
+	}
+
+	mdelay(10); /* prophylactic delay, datasheet write cycle time = 5 ms */
+	return 0;
+};
+
+void netup_get_card_info(struct i2c_adapter *i2c_adap,
+				struct netup_card_info *cinfo)
+{
+	int i, j;
+
+	cinfo->rev =  netup_eeprom_read(i2c_adap, 63);
+
+	for (i = 64, j = 0; i < 70; i++, j++)
+		cinfo->port[0].mac[j] =  netup_eeprom_read(i2c_adap, i);
+
+	for (i = 70, j = 0; i < 76; i++, j++)
+		cinfo->port[1].mac[j] =  netup_eeprom_read(i2c_adap, i);
+};
diff --git a/drivers/media/pci/cx23885/netup-eeprom.h b/drivers/media/pci/cx23885/netup-eeprom.h
new file mode 100644
index 0000000..13926e1
--- /dev/null
+++ b/drivers/media/pci/cx23885/netup-eeprom.h
@@ -0,0 +1,42 @@
+/*
+ * netup-eeprom.h
+ *
+ * 24LC02 EEPROM driver in conjunction with NetUP Dual DVB-S2 CI card
+ *
+ * Copyright (C) 2009 NetUP Inc.
+ * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef NETUP_EEPROM_H
+#define NETUP_EEPROM_H
+
+struct netup_port_info {
+	u8 mac[6];/* card MAC address */
+};
+
+struct netup_card_info {
+	struct netup_port_info port[2];/* ports - 1,2 */
+	u8 rev;/* card revision */
+};
+
+extern int netup_eeprom_read(struct i2c_adapter *i2c_adap, u8 addr);
+extern int netup_eeprom_write(struct i2c_adapter *i2c_adap, u8 addr, u8 data);
+extern void netup_get_card_info(struct i2c_adapter *i2c_adap,
+				struct netup_card_info *cinfo);
+
+#endif
diff --git a/drivers/media/pci/cx23885/netup-init.c b/drivers/media/pci/cx23885/netup-init.c
new file mode 100644
index 0000000..f4893e6
--- /dev/null
+++ b/drivers/media/pci/cx23885/netup-init.c
@@ -0,0 +1,125 @@
+/*
+ * netup-init.c
+ *
+ * NetUP Dual DVB-S2 CI driver
+ *
+ * Copyright (C) 2009 NetUP Inc.
+ * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
+ * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "cx23885.h"
+
+static void i2c_av_write(struct i2c_adapter *i2c, u16 reg, u8 val)
+{
+	int ret;
+	u8 buf[3];
+	struct i2c_msg msg = {
+		.addr	= 0x88 >> 1,
+		.flags	= 0,
+		.buf	= buf,
+		.len	= 3
+	};
+
+	buf[0] = reg >> 8;
+	buf[1] = reg & 0xff;
+	buf[2] = val;
+
+	ret = i2c_transfer(i2c, &msg, 1);
+
+	if (ret != 1)
+		printk(KERN_ERR "%s: i2c write error!\n", __func__);
+}
+
+static void i2c_av_write4(struct i2c_adapter *i2c, u16 reg, u32 val)
+{
+	int ret;
+	u8 buf[6];
+	struct i2c_msg msg = {
+		.addr	= 0x88 >> 1,
+		.flags	= 0,
+		.buf	= buf,
+		.len	= 6
+	};
+
+	buf[0] = reg >> 8;
+	buf[1] = reg & 0xff;
+	buf[2] = val & 0xff;
+	buf[3] = (val >> 8) & 0xff;
+	buf[4] = (val >> 16) & 0xff;
+	buf[5] = val >> 24;
+
+	ret = i2c_transfer(i2c, &msg, 1);
+
+	if (ret != 1)
+		printk(KERN_ERR "%s: i2c write error!\n", __func__);
+}
+
+static u8 i2c_av_read(struct i2c_adapter *i2c, u16 reg)
+{
+	int ret;
+	u8 buf[2];
+	struct i2c_msg msg = {
+		.addr	= 0x88 >> 1,
+		.flags	= 0,
+		.buf	= buf,
+		.len	= 2
+	};
+
+	buf[0] = reg >> 8;
+	buf[1] = reg & 0xff;
+
+	ret = i2c_transfer(i2c, &msg, 1);
+
+	if (ret != 1)
+		printk(KERN_ERR "%s: i2c write error!\n", __func__);
+
+	msg.flags = I2C_M_RD;
+	msg.len = 1;
+
+	ret = i2c_transfer(i2c, &msg, 1);
+
+	if (ret != 1)
+		printk(KERN_ERR "%s: i2c read error!\n", __func__);
+
+	return buf[0];
+}
+
+static void i2c_av_and_or(struct i2c_adapter *i2c, u16 reg, unsigned and_mask,
+								u8 or_value)
+{
+	i2c_av_write(i2c, reg, (i2c_av_read(i2c, reg) & and_mask) | or_value);
+}
+/* set 27MHz on AUX_CLK */
+void netup_initialize(struct cx23885_dev *dev)
+{
+	struct cx23885_i2c *i2c_bus = &dev->i2c_bus[2];
+	struct i2c_adapter *i2c = &i2c_bus->i2c_adap;
+
+	/* Stop microcontroller */
+	i2c_av_and_or(i2c, 0x803, ~0x10, 0x00);
+
+	/* Aux PLL frac for 27 MHz */
+	i2c_av_write4(i2c, 0x114, 0xea0eb3);
+
+	/* Aux PLL int for 27 MHz */
+	i2c_av_write4(i2c, 0x110, 0x090319);
+
+	/* start microcontroller */
+	i2c_av_and_or(i2c, 0x803, ~0x10, 0x10);
+}
diff --git a/drivers/media/pci/cx23885/netup-init.h b/drivers/media/pci/cx23885/netup-init.h
new file mode 100644
index 0000000..d26ae4b
--- /dev/null
+++ b/drivers/media/pci/cx23885/netup-init.h
@@ -0,0 +1,25 @@
+/*
+ * netup-init.h
+ *
+ * NetUP Dual DVB-S2 CI driver
+ *
+ * Copyright (C) 2009 NetUP Inc.
+ * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
+ * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+extern void netup_initialize(struct cx23885_dev *dev);