summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb/frontends
diff options
context:
space:
mode:
authorAndrew de Quincey <adq_dvb@lidskialf.net>2006-09-05 17:53:06 -0300
committerMauro Carvalho Chehab <mchehab@infradead.org>2006-09-26 12:30:35 -0300
commit00be2e7c64157c845afff56f25677da706b151b6 (patch)
tree763eecb4d93db9c2e407b6085e21655fd11cd23a /drivers/media/dvb/frontends
parentc4e4aac88737879a562760ac07e51167847f193d (diff)
downloadop-kernel-dev-00be2e7c64157c845afff56f25677da706b151b6.zip
op-kernel-dev-00be2e7c64157c845afff56f25677da706b151b6.tar.gz
V4L/DVB (4606): Add driver for TUA6100
This driver was originally in budget-av.c, however I have extracted it into a seperate file to permit reuse. I also reworked the code to make it maintainable. I then examined the KNC1 windows drivers and rewrote the code in order to configure the PLL as they do. This solves a lot of reported tuning problems. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Diffstat (limited to 'drivers/media/dvb/frontends')
-rw-r--r--drivers/media/dvb/frontends/Kconfig7
-rw-r--r--drivers/media/dvb/frontends/Makefile1
-rw-r--r--drivers/media/dvb/frontends/tua6100.c205
-rw-r--r--drivers/media/dvb/frontends/tua6100.h47
4 files changed, 260 insertions, 0 deletions
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index 9e5ff0d..080fa25 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -296,4 +296,11 @@ config DVB_ISL6421
help
An SEC control chip.
+config DVB_TUA6100
+ tristate "TUA6100 PLL"
+ depends on DVB_CORE && I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ A DVBS PLL chip.
+
endmenu
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 0b43942..dce9cf0 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -36,3 +36,4 @@ obj-$(CONFIG_DVB_ISL6421) += isl6421.o
obj-$(CONFIG_DVB_TDA10086) += tda10086.o
obj-$(CONFIG_DVB_TDA826X) += tda826x.o
obj-$(CONFIG_DVB_TUNER_MT2060) += mt2060.o
+obj-$(CONFIG_DVB_TUA6100) += tua6100.o
diff --git a/drivers/media/dvb/frontends/tua6100.c b/drivers/media/dvb/frontends/tua6100.c
new file mode 100644
index 0000000..8855439
--- /dev/null
+++ b/drivers/media/dvb/frontends/tua6100.c
@@ -0,0 +1,205 @@
+/**
+ * Driver for Infineon tua6100 pll.
+ *
+ * (c) 2006 Andrew de Quincey
+ *
+ * Based on code found in budget-av.c, which has the following:
+ * Compiled from various sources by Michael Hunold <michael@mihu.de>
+ *
+ * CI interface support (c) 2004 Olivier Gournet <ogournet@anevia.com> &
+ * Andrew de Quincey <adq_dvb@lidskialf.net>
+ *
+ * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
+ *
+ * Copyright (C) 1999-2002 Ralph Metzler
+ * & Marcus Metzler for convergence integrated media GmbH
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/dvb/frontend.h>
+#include <asm/types.h>
+
+#include "tua6100.h"
+
+struct tua6100_priv {
+ /* i2c details */
+ int i2c_address;
+ struct i2c_adapter *i2c;
+ u32 frequency;
+};
+
+static int tua6100_release(struct dvb_frontend *fe)
+{
+ if (fe->tuner_priv)
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
+ return 0;
+}
+
+static int tua6100_sleep(struct dvb_frontend *fe)
+{
+ struct tua6100_priv *priv = fe->tuner_priv;
+ int ret;
+ u8 reg0[] = { 0x00, 0x00 };
+ struct i2c_msg msg = { .addr = priv->i2c_address, .flags = 0, .buf = reg0, .len = 2 };
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if ((ret = i2c_transfer (priv->i2c, &msg, 1)) != 1) {
+ printk("%s: i2c error\n", __FUNCTION__);
+ }
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+
+ return (ret == 1) ? 0 : ret;
+}
+
+static int tua6100_set_params(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ struct tua6100_priv *priv = fe->tuner_priv;
+ u32 div;
+ u32 prediv;
+ u8 reg0[] = { 0x00, 0x00 };
+ u8 reg1[] = { 0x01, 0x00, 0x00, 0x00 };
+ u8 reg2[] = { 0x02, 0x00, 0x00 };
+ struct i2c_msg msg0 = { .addr = priv->i2c_address, .flags = 0, .buf = reg0, .len = 2 };
+ struct i2c_msg msg1 = { .addr = priv->i2c_address, .flags = 0, .buf = reg1, .len = 4 };
+ struct i2c_msg msg2 = { .addr = priv->i2c_address, .flags = 0, .buf = reg2, .len = 3 };
+
+#define _R 4
+#define _P 32
+#define _ri 4000000
+
+ // setup register 0
+ if (params->frequency < 2000000) {
+ reg0[1] = 0x03;
+ } else {
+ reg0[1] = 0x07;
+ }
+
+ // setup register 1
+ if (params->frequency < 1630000) {
+ reg1[1] = 0x2c;
+ } else {
+ reg1[1] = 0x0c;
+ }
+ if (_P == 64)
+ reg1[1] |= 0x40;
+ if (params->frequency >= 1525000)
+ reg1[1] |= 0x80;
+
+ // register 2
+ reg2[1] = (_R >> 8) & 0x03;
+ reg2[2] = _R;
+ if (params->frequency < 1455000) {
+ reg2[1] |= 0x1c;
+ } else if (params->frequency < 1630000) {
+ reg2[1] |= 0x0c;
+ } else {
+ reg2[1] |= 0x1c;
+ }
+
+ // The N divisor ratio (note: params->frequency is in kHz, but we need it in Hz)
+ prediv = (params->frequency * _R) / (_ri / 1000);
+ div = prediv / _P;
+ reg1[1] |= (div >> 9) & 0x03;
+ reg1[2] = div >> 1;
+ reg1[3] = (div << 7);
+ priv->frequency = ((div * _P) * (_ri / 1000)) / _R;
+
+ // Finally, calculate and store the value for A
+ reg1[3] |= (prediv - (div*_P)) & 0x7f;
+
+#undef _R
+#undef _P
+#undef _ri
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(priv->i2c, &msg0, 1) != 1)
+ return -EIO;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(priv->i2c, &msg2, 1) != 1)
+ return -EIO;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (i2c_transfer(priv->i2c, &msg1, 1) != 1)
+ return -EIO;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+
+ return 0;
+}
+
+static int tua6100_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct tua6100_priv *priv = fe->tuner_priv;
+ *frequency = priv->frequency;
+ return 0;
+}
+
+static struct dvb_tuner_ops tua6100_tuner_ops = {
+ .info = {
+ .name = "Infineon TUA6100",
+ .frequency_min = 950000,
+ .frequency_max = 2150000,
+ .frequency_step = 1000,
+ },
+ .release = tua6100_release,
+ .sleep = tua6100_sleep,
+ .set_params = tua6100_set_params,
+ .get_frequency = tua6100_get_frequency,
+};
+
+struct dvb_frontend *tua6100_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c)
+{
+ struct tua6100_priv *priv = NULL;
+ u8 b1 [] = { 0x80 };
+ u8 b2 [] = { 0x00 };
+ struct i2c_msg msg [] = { { .addr = addr, .flags = 0, .buf = b1, .len = 1 },
+ { .addr = addr, .flags = I2C_M_RD, .buf = b2, .len = 1 } };
+ int ret;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ ret = i2c_transfer (i2c, msg, 2);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+
+ if (ret != 2)
+ return NULL;
+
+ priv = kzalloc(sizeof(struct tua6100_priv), GFP_KERNEL);
+ if (priv == NULL)
+ return NULL;
+
+ priv->i2c_address = addr;
+ priv->i2c = i2c;
+
+ memcpy(&fe->ops.tuner_ops, &tua6100_tuner_ops, sizeof(struct dvb_tuner_ops));
+ fe->tuner_priv = priv;
+ return fe;
+}
+EXPORT_SYMBOL(tua6100_attach);
+
+MODULE_DESCRIPTION("DVB tua6100 driver");
+MODULE_AUTHOR("Andrew de Quincey");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/tua6100.h b/drivers/media/dvb/frontends/tua6100.h
new file mode 100644
index 0000000..2e5d8fb
--- /dev/null
+++ b/drivers/media/dvb/frontends/tua6100.h
@@ -0,0 +1,47 @@
+/**
+ * Driver for Infineon tua6100 PLL.
+ *
+ * (c) 2006 Andrew de Quincey
+ *
+ * Based on code found in budget-av.c, which has the following:
+ * Compiled from various sources by Michael Hunold <michael@mihu.de>
+ *
+ * CI interface support (c) 2004 Olivier Gournet <ogournet@anevia.com> &
+ * Andrew de Quincey <adq_dvb@lidskialf.net>
+ *
+ * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
+ *
+ * Copyright (C) 1999-2002 Ralph Metzler
+ * & Marcus Metzler for convergence integrated media GmbH
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __DVB_TUA6100_H__
+#define __DVB_TUA6100_H__
+
+#include <linux/i2c.h>
+#include "dvb_frontend.h"
+
+/**
+ * Attach a tua6100 pll to the supplied frontend structure.
+ *
+ * @param fe Frontend to attach to.
+ * @param addr i2c address of the pll.
+ * @param i2c i2c adapter to use.
+ * @return FE pointer on success, NULL on failure.
+ */
+extern struct dvb_frontend *tua6100_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c);
+
+#endif
OpenPOWER on IntegriCloud