diff options
author | Len Brown <len.brown@intel.com> | 2006-01-07 03:50:18 -0500 |
---|---|---|
committer | Len Brown <len.brown@intel.com> | 2006-01-07 03:50:18 -0500 |
commit | ed03f430cdc8c802652467e9097606fedc2c7abc (patch) | |
tree | 30941ec1e6f93e99358fefe18175e5dd800a4379 /drivers/media/dvb/frontends/cx24110.c | |
parent | ed349a8a0a780ed27e2a765f16cee54d9b63bfee (diff) | |
parent | 6f957eaf79356a32e838f5f262ee9a60544b1d5b (diff) | |
download | op-kernel-dev-ed03f430cdc8c802652467e9097606fedc2c7abc.zip op-kernel-dev-ed03f430cdc8c802652467e9097606fedc2c7abc.tar.gz |
Pull pnpacpi into acpica branch
Diffstat (limited to 'drivers/media/dvb/frontends/cx24110.c')
-rw-r--r-- | drivers/media/dvb/frontends/cx24110.c | 312 |
1 files changed, 156 insertions, 156 deletions
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c index 654d7dc..0c4db80 100644 --- a/drivers/media/dvb/frontends/cx24110.c +++ b/drivers/media/dvb/frontends/cx24110.c @@ -55,81 +55,81 @@ static int debug; } while (0) static struct {u8 reg; u8 data;} cx24110_regdata[]= - /* Comments beginning with @ denote this value should - be the default */ - {{0x09,0x01}, /* SoftResetAll */ - {0x09,0x00}, /* release reset */ - {0x01,0xe8}, /* MSB of code rate 27.5MS/s */ - {0x02,0x17}, /* middle byte " */ - {0x03,0x29}, /* LSB " */ - {0x05,0x03}, /* @ DVB mode, standard code rate 3/4 */ - {0x06,0xa5}, /* @ PLL 60MHz */ - {0x07,0x01}, /* @ Fclk, i.e. sampling clock, 60MHz */ - {0x0a,0x00}, /* @ partial chip disables, do not set */ - {0x0b,0x01}, /* set output clock in gapped mode, start signal low - active for first byte */ - {0x0c,0x11}, /* no parity bytes, large hold time, serial data out */ - {0x0d,0x6f}, /* @ RS Sync/Unsync thresholds */ - {0x10,0x40}, /* chip doc is misleading here: write bit 6 as 1 - to avoid starting the BER counter. Reset the - CRC test bit. Finite counting selected */ - {0x15,0xff}, /* @ size of the limited time window for RS BER - estimation. It is <value>*256 RS blocks, this - gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */ - {0x16,0x00}, /* @ enable all RS output ports */ - {0x17,0x04}, /* @ time window allowed for the RS to sync */ - {0x18,0xae}, /* @ allow all standard DVB code rates to be scanned - for automatically */ - /* leave the current code rate and normalization - registers as they are after reset... */ - {0x21,0x10}, /* @ during AutoAcq, search each viterbi setting - only once */ - {0x23,0x18}, /* @ size of the limited time window for Viterbi BER - estimation. It is <value>*65536 channel bits, i.e. - approx. 38ms at 27.5MS/s, rate 3/4 */ - {0x24,0x24}, /* do not trigger Viterbi CRC test. Finite count window */ - /* leave front-end AGC parameters at default values */ - /* leave decimation AGC parameters at default values */ - {0x35,0x40}, /* disable all interrupts. They are not connected anyway */ - {0x36,0xff}, /* clear all interrupt pending flags */ - {0x37,0x00}, /* @ fully enable AutoAcqq state machine */ - {0x38,0x07}, /* @ enable fade recovery, but not autostart AutoAcq */ - /* leave the equalizer parameters on their default values */ - /* leave the final AGC parameters on their default values */ - {0x41,0x00}, /* @ MSB of front-end derotator frequency */ - {0x42,0x00}, /* @ middle bytes " */ - {0x43,0x00}, /* @ LSB " */ - /* leave the carrier tracking loop parameters on default */ - /* leave the bit timing loop parameters at gefault */ - {0x56,0x4d}, /* set the filtune voltage to 2.7V, as recommended by */ - /* the cx24108 data sheet for symbol rates above 15MS/s */ - {0x57,0x00}, /* @ Filter sigma delta enabled, positive */ - {0x61,0x95}, /* GPIO pins 1-4 have special function */ - {0x62,0x05}, /* GPIO pin 5 has special function, pin 6 is GPIO */ - {0x63,0x00}, /* All GPIO pins use CMOS output characteristics */ - {0x64,0x20}, /* GPIO 6 is input, all others are outputs */ - {0x6d,0x30}, /* tuner auto mode clock freq 62kHz */ - {0x70,0x15}, /* use auto mode, tuner word is 21 bits long */ - {0x73,0x00}, /* @ disable several demod bypasses */ - {0x74,0x00}, /* @ " */ - {0x75,0x00} /* @ " */ - /* the remaining registers are for SEC */ + /* Comments beginning with @ denote this value should + be the default */ + {{0x09,0x01}, /* SoftResetAll */ + {0x09,0x00}, /* release reset */ + {0x01,0xe8}, /* MSB of code rate 27.5MS/s */ + {0x02,0x17}, /* middle byte " */ + {0x03,0x29}, /* LSB " */ + {0x05,0x03}, /* @ DVB mode, standard code rate 3/4 */ + {0x06,0xa5}, /* @ PLL 60MHz */ + {0x07,0x01}, /* @ Fclk, i.e. sampling clock, 60MHz */ + {0x0a,0x00}, /* @ partial chip disables, do not set */ + {0x0b,0x01}, /* set output clock in gapped mode, start signal low + active for first byte */ + {0x0c,0x11}, /* no parity bytes, large hold time, serial data out */ + {0x0d,0x6f}, /* @ RS Sync/Unsync thresholds */ + {0x10,0x40}, /* chip doc is misleading here: write bit 6 as 1 + to avoid starting the BER counter. Reset the + CRC test bit. Finite counting selected */ + {0x15,0xff}, /* @ size of the limited time window for RS BER + estimation. It is <value>*256 RS blocks, this + gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */ + {0x16,0x00}, /* @ enable all RS output ports */ + {0x17,0x04}, /* @ time window allowed for the RS to sync */ + {0x18,0xae}, /* @ allow all standard DVB code rates to be scanned + for automatically */ + /* leave the current code rate and normalization + registers as they are after reset... */ + {0x21,0x10}, /* @ during AutoAcq, search each viterbi setting + only once */ + {0x23,0x18}, /* @ size of the limited time window for Viterbi BER + estimation. It is <value>*65536 channel bits, i.e. + approx. 38ms at 27.5MS/s, rate 3/4 */ + {0x24,0x24}, /* do not trigger Viterbi CRC test. Finite count window */ + /* leave front-end AGC parameters at default values */ + /* leave decimation AGC parameters at default values */ + {0x35,0x40}, /* disable all interrupts. They are not connected anyway */ + {0x36,0xff}, /* clear all interrupt pending flags */ + {0x37,0x00}, /* @ fully enable AutoAcqq state machine */ + {0x38,0x07}, /* @ enable fade recovery, but not autostart AutoAcq */ + /* leave the equalizer parameters on their default values */ + /* leave the final AGC parameters on their default values */ + {0x41,0x00}, /* @ MSB of front-end derotator frequency */ + {0x42,0x00}, /* @ middle bytes " */ + {0x43,0x00}, /* @ LSB " */ + /* leave the carrier tracking loop parameters on default */ + /* leave the bit timing loop parameters at gefault */ + {0x56,0x4d}, /* set the filtune voltage to 2.7V, as recommended by */ + /* the cx24108 data sheet for symbol rates above 15MS/s */ + {0x57,0x00}, /* @ Filter sigma delta enabled, positive */ + {0x61,0x95}, /* GPIO pins 1-4 have special function */ + {0x62,0x05}, /* GPIO pin 5 has special function, pin 6 is GPIO */ + {0x63,0x00}, /* All GPIO pins use CMOS output characteristics */ + {0x64,0x20}, /* GPIO 6 is input, all others are outputs */ + {0x6d,0x30}, /* tuner auto mode clock freq 62kHz */ + {0x70,0x15}, /* use auto mode, tuner word is 21 bits long */ + {0x73,0x00}, /* @ disable several demod bypasses */ + {0x74,0x00}, /* @ " */ + {0x75,0x00} /* @ " */ + /* the remaining registers are for SEC */ }; static int cx24110_writereg (struct cx24110_state* state, int reg, int data) { - u8 buf [] = { reg, data }; + u8 buf [] = { reg, data }; struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; int err; - if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { + if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { dprintk ("%s: writereg error (err == %i, reg == 0x%02x," " data == 0x%02x)\n", __FUNCTION__, err, reg, data); return -EREMOTEIO; } - return 0; + return 0; } static int cx24110_readreg (struct cx24110_state* state, u8 reg) @@ -153,27 +153,27 @@ static int cx24110_set_inversion (struct cx24110_state* state, fe_spectral_inver switch (inversion) { case INVERSION_OFF: - cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1); - /* AcqSpectrInvDis on. No idea why someone should want this */ - cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)&0xf7); - /* Initial value 0 at start of acq */ - cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)&0xef); - /* current value 0 */ - /* The cx24110 manual tells us this reg is read-only. - But what the heck... set it ayways */ - break; + cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1); + /* AcqSpectrInvDis on. No idea why someone should want this */ + cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)&0xf7); + /* Initial value 0 at start of acq */ + cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)&0xef); + /* current value 0 */ + /* The cx24110 manual tells us this reg is read-only. + But what the heck... set it ayways */ + break; case INVERSION_ON: - cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1); - /* AcqSpectrInvDis on. No idea why someone should want this */ - cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)|0x08); - /* Initial value 1 at start of acq */ - cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)|0x10); - /* current value 1 */ - break; + cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x1); + /* AcqSpectrInvDis on. No idea why someone should want this */ + cx24110_writereg(state,0x5,cx24110_readreg(state,0x5)|0x08); + /* Initial value 1 at start of acq */ + cx24110_writereg(state,0x22,cx24110_readreg(state,0x22)|0x10); + /* current value 1 */ + break; case INVERSION_AUTO: - cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xfe); - /* AcqSpectrInvDis off. Leave initial & current states as is */ - break; + cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xfe); + /* AcqSpectrInvDis off. Leave initial & current states as is */ + break; default: return -EINVAL; } @@ -185,18 +185,18 @@ static int cx24110_set_fec (struct cx24110_state* state, fe_code_rate_t fec) { /* fixme (low): error handling */ - static const int rate[]={-1,1,2,3,5,7,-1}; - static const int g1[]={-1,0x01,0x02,0x05,0x15,0x45,-1}; - static const int g2[]={-1,0x01,0x03,0x06,0x1a,0x7a,-1}; + static const int rate[]={-1,1,2,3,5,7,-1}; + static const int g1[]={-1,0x01,0x02,0x05,0x15,0x45,-1}; + static const int g2[]={-1,0x01,0x03,0x06,0x1a,0x7a,-1}; - /* Well, the AutoAcq engine of the cx24106 and 24110 automatically - searches all enabled viterbi rates, and can handle non-standard - rates as well. */ + /* Well, the AutoAcq engine of the cx24106 and 24110 automatically + searches all enabled viterbi rates, and can handle non-standard + rates as well. */ - if (fec>FEC_AUTO) - fec=FEC_AUTO; + if (fec>FEC_AUTO) + fec=FEC_AUTO; - if (fec==FEC_AUTO) { /* (re-)establish AutoAcq behaviour */ + if (fec==FEC_AUTO) { /* (re-)establish AutoAcq behaviour */ cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)&0xdf); /* clear AcqVitDis bit */ cx24110_writereg(state,0x18,0xae); @@ -208,7 +208,7 @@ static int cx24110_set_fec (struct cx24110_state* state, fe_code_rate_t fec) cx24110_writereg(state,0x1a,0x05); cx24110_writereg(state,0x1b,0x06); /* set the puncture registers for code rate 3/4 */ return 0; - } else { + } else { cx24110_writereg(state,0x37,cx24110_readreg(state,0x37)|0x20); /* set AcqVitDis bit */ if(rate[fec]>0) { @@ -219,10 +219,10 @@ static int cx24110_set_fec (struct cx24110_state* state, fe_code_rate_t fec) cx24110_writereg(state,0x1a,g1[fec]); cx24110_writereg(state,0x1b,g2[fec]); /* not sure if this is the right way: I always used AutoAcq mode */ - } else + } else return -EOPNOTSUPP; /* fixme (low): which is the correct return code? */ - }; + }; return 0; } @@ -245,72 +245,72 @@ static fe_code_rate_t cx24110_get_fec (struct cx24110_state* state) static int cx24110_set_symbolrate (struct cx24110_state* state, u32 srate) { /* fixme (low): add error handling */ - u32 ratio; - u32 tmp, fclk, BDRI; + u32 ratio; + u32 tmp, fclk, BDRI; - static const u32 bands[]={5000000UL,15000000UL,90999000UL/2}; - int i; + static const u32 bands[]={5000000UL,15000000UL,90999000UL/2}; + int i; dprintk("cx24110 debug: entering %s(%d)\n",__FUNCTION__,srate); - if (srate>90999000UL/2) - srate=90999000UL/2; - if (srate<500000) - srate=500000; + if (srate>90999000UL/2) + srate=90999000UL/2; + if (srate<500000) + srate=500000; - for(i=0;(i<sizeof(bands)/sizeof(bands[0]))&&(srate>bands[i]);i++) + for(i=0;(i<sizeof(bands)/sizeof(bands[0]))&&(srate>bands[i]);i++) ; - /* first, check which sample rate is appropriate: 45, 60 80 or 90 MHz, - and set the PLL accordingly (R07[1:0] Fclk, R06[7:4] PLLmult, - R06[3:0] PLLphaseDetGain */ - tmp=cx24110_readreg(state,0x07)&0xfc; - if(srate<90999000UL/4) { /* sample rate 45MHz*/ + /* first, check which sample rate is appropriate: 45, 60 80 or 90 MHz, + and set the PLL accordingly (R07[1:0] Fclk, R06[7:4] PLLmult, + R06[3:0] PLLphaseDetGain */ + tmp=cx24110_readreg(state,0x07)&0xfc; + if(srate<90999000UL/4) { /* sample rate 45MHz*/ cx24110_writereg(state,0x07,tmp); cx24110_writereg(state,0x06,0x78); fclk=90999000UL/2; - } else if(srate<60666000UL/2) { /* sample rate 60MHz */ + } else if(srate<60666000UL/2) { /* sample rate 60MHz */ cx24110_writereg(state,0x07,tmp|0x1); cx24110_writereg(state,0x06,0xa5); fclk=60666000UL; - } else if(srate<80888000UL/2) { /* sample rate 80MHz */ + } else if(srate<80888000UL/2) { /* sample rate 80MHz */ cx24110_writereg(state,0x07,tmp|0x2); cx24110_writereg(state,0x06,0x87); fclk=80888000UL; - } else { /* sample rate 90MHz */ + } else { /* sample rate 90MHz */ cx24110_writereg(state,0x07,tmp|0x3); cx24110_writereg(state,0x06,0x78); fclk=90999000UL; - }; - dprintk("cx24110 debug: fclk %d Hz\n",fclk); - /* we need to divide two integers with approx. 27 bits in 32 bit - arithmetic giving a 25 bit result */ - /* the maximum dividend is 90999000/2, 0x02b6446c, this number is - also the most complex divisor. Hence, the dividend has, - assuming 32bit unsigned arithmetic, 6 clear bits on top, the - divisor 2 unused bits at the bottom. Also, the quotient is - always less than 1/2. Borrowed from VES1893.c, of course */ + }; + dprintk("cx24110 debug: fclk %d Hz\n",fclk); + /* we need to divide two integers with approx. 27 bits in 32 bit + arithmetic giving a 25 bit result */ + /* the maximum dividend is 90999000/2, 0x02b6446c, this number is + also the most complex divisor. Hence, the dividend has, + assuming 32bit unsigned arithmetic, 6 clear bits on top, the + divisor 2 unused bits at the bottom. Also, the quotient is + always less than 1/2. Borrowed from VES1893.c, of course */ - tmp=srate<<6; - BDRI=fclk>>2; - ratio=(tmp/BDRI); + tmp=srate<<6; + BDRI=fclk>>2; + ratio=(tmp/BDRI); - tmp=(tmp%BDRI)<<8; - ratio=(ratio<<8)+(tmp/BDRI); + tmp=(tmp%BDRI)<<8; + ratio=(ratio<<8)+(tmp/BDRI); - tmp=(tmp%BDRI)<<8; - ratio=(ratio<<8)+(tmp/BDRI); + tmp=(tmp%BDRI)<<8; + ratio=(ratio<<8)+(tmp/BDRI); - tmp=(tmp%BDRI)<<1; - ratio=(ratio<<1)+(tmp/BDRI); + tmp=(tmp%BDRI)<<1; + ratio=(ratio<<1)+(tmp/BDRI); - dprintk("srate= %d (range %d, up to %d)\n", srate,i,bands[i]); - dprintk("fclk = %d\n", fclk); - dprintk("ratio= %08x\n", ratio); + dprintk("srate= %d (range %d, up to %d)\n", srate,i,bands[i]); + dprintk("fclk = %d\n", fclk); + dprintk("ratio= %08x\n", ratio); - cx24110_writereg(state, 0x1, (ratio>>16)&0xff); - cx24110_writereg(state, 0x2, (ratio>>8)&0xff); - cx24110_writereg(state, 0x3, (ratio)&0xff); + cx24110_writereg(state, 0x1, (ratio>>16)&0xff); + cx24110_writereg(state, 0x2, (ratio>>8)&0xff); + cx24110_writereg(state, 0x3, (ratio)&0xff); - return 0; + return 0; } @@ -324,48 +324,48 @@ int cx24110_pll_write (struct dvb_frontend* fe, u32 data) dprintk("cx24110 debug: cx24108_write(%8.8x)\n",data); - cx24110_writereg(state,0x6d,0x30); /* auto mode at 62kHz */ - cx24110_writereg(state,0x70,0x15); /* auto mode 21 bits */ + cx24110_writereg(state,0x6d,0x30); /* auto mode at 62kHz */ + cx24110_writereg(state,0x70,0x15); /* auto mode 21 bits */ - /* if the auto tuner writer is still busy, clear it out */ - while (cx24110_readreg(state,0x6d)&0x80) + /* if the auto tuner writer is still busy, clear it out */ + while (cx24110_readreg(state,0x6d)&0x80) cx24110_writereg(state,0x72,0); - /* write the topmost 8 bits */ - cx24110_writereg(state,0x72,(data>>24)&0xff); + /* write the topmost 8 bits */ + cx24110_writereg(state,0x72,(data>>24)&0xff); - /* wait for the send to be completed */ - while ((cx24110_readreg(state,0x6d)&0xc0)==0x80) + /* wait for the send to be completed */ + while ((cx24110_readreg(state,0x6d)&0xc0)==0x80) ; - /* send another 8 bytes */ - cx24110_writereg(state,0x72,(data>>16)&0xff); - while ((cx24110_readreg(state,0x6d)&0xc0)==0x80) + /* send another 8 bytes */ + cx24110_writereg(state,0x72,(data>>16)&0xff); + while ((cx24110_readreg(state,0x6d)&0xc0)==0x80) ; - /* and the topmost 5 bits of this byte */ - cx24110_writereg(state,0x72,(data>>8)&0xff); - while ((cx24110_readreg(state,0x6d)&0xc0)==0x80) + /* and the topmost 5 bits of this byte */ + cx24110_writereg(state,0x72,(data>>8)&0xff); + while ((cx24110_readreg(state,0x6d)&0xc0)==0x80) ; - /* now strobe the enable line once */ - cx24110_writereg(state,0x6d,0x32); - cx24110_writereg(state,0x6d,0x30); + /* now strobe the enable line once */ + cx24110_writereg(state,0x6d,0x32); + cx24110_writereg(state,0x6d,0x30); - return 0; + return 0; } static int cx24110_initfe(struct dvb_frontend* fe) { struct cx24110_state *state = fe->demodulator_priv; /* fixme (low): error handling */ - int i; + int i; dprintk("%s: init chip\n", __FUNCTION__); - for(i=0;i<sizeof(cx24110_regdata)/sizeof(cx24110_regdata[0]);i++) { + for(i=0;i<sizeof(cx24110_regdata)/sizeof(cx24110_regdata[0]);i++) { cx24110_writereg(state, cx24110_regdata[i].reg, cx24110_regdata[i].data); - }; + }; if (state->config->pll_init) state->config->pll_init(fe); |