Merge branch 'master' into for-next

Fast-forward merge with Linus to be able to merge patches
based on more recent version of the tree.

12 files changed, 305 insertions, 146 deletions

diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index e85304c..5d73dec 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -81,6 +81,7 @@ config DVB_USB_DIB0700
 	select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_XC4000 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE
 	help
 	  Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 100ebc3..d7ad05f 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -91,7 +91,6 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 	case GET_CONFIG:
 	case READ_MEMORY:
 	case RECONNECT_USB:
-	case GET_IR_CODE:
 		write = 0;
 		break;
 	case READ_I2C:
@@ -164,13 +163,6 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 	deb_xfer("<<< ");
 	debug_dump(buf, act_len, deb_xfer);
 
-	/* remote controller query status is 1 if remote code is not received */
-	if (req->cmd == GET_IR_CODE && buf[1] == 1) {
-		buf[1] = 0; /* clear command "error" status */
-		memset(&buf[2], 0, req->data_len);
-		buf[3] = 1; /* no remote code received mark */
-	}
-
 	/* check status */
 	if (buf[1]) {
 		err("command failed:%d", buf[1]);
@@ -292,6 +284,10 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate.
 		}
 
 		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
+			if (msg[i].len > 3 || msg[i+1].len > 61) {
+				ret = -EOPNOTSUPP;
+				goto error;
+			}
 			if (msg[i].addr ==
 				af9015_af9013_config[0].demod_address)
 				req.cmd = READ_MEMORY;
@@ -306,12 +302,16 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate.
 			ret = af9015_ctrl_msg(d, &req);
 			i += 2;
 		} else if (msg[i].flags & I2C_M_RD) {
-			ret = -EINVAL;
+			if (msg[i].len > 61) {
+				ret = -EOPNOTSUPP;
+				goto error;
+			}
 			if (msg[i].addr ==
-				af9015_af9013_config[0].demod_address)
+				af9015_af9013_config[0].demod_address) {
+				ret = -EINVAL;
 				goto error;
-			else
-				req.cmd = READ_I2C;
+			}
+			req.cmd = READ_I2C;
 			req.i2c_addr = msg[i].addr;
 			req.addr = addr;
 			req.mbox = mbox;
@@ -321,6 +321,10 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate.
 			ret = af9015_ctrl_msg(d, &req);
 			i += 1;
 		} else {
+			if (msg[i].len > 21) {
+				ret = -EOPNOTSUPP;
+				goto error;
+			}
 			if (msg[i].addr ==
 				af9015_af9013_config[0].demod_address)
 				req.cmd = WRITE_MEMORY;
@@ -735,6 +739,7 @@ static const struct af9015_rc_setup af9015_rc_setup_hashes[] = {
 	{ 0xb8feb708, RC_MAP_MSI_DIGIVOX_II },
 	{ 0xa3703d00, RC_MAP_ALINK_DTU_M },
 	{ 0x9b7dc64e, RC_MAP_TOTAL_MEDIA_IN_HAND }, /* MYGICTV U718 */
+	{ 0x5d49e3db, RC_MAP_DIGITTRADE }, /* LC-Power LC-USB-DVBT */
 	{ }
 };
 
@@ -749,6 +754,8 @@ static const struct af9015_rc_setup af9015_rc_setup_usbids[] = {
 		RC_MAP_AZUREWAVE_AD_TU700 },
 	{ (USB_VID_MSI_2 << 16) + USB_PID_MSI_DIGI_VOX_MINI_III,
 		RC_MAP_MSI_DIGIVOX_III },
+	{ (USB_VID_MSI_2 << 16) + USB_PID_MSI_DIGIVOX_DUO,
+		RC_MAP_MSI_DIGIVOX_III },
 	{ (USB_VID_LEADTEK << 16) + USB_PID_WINFAST_DTV_DONGLE_GOLD,
 		RC_MAP_LEADTEK_Y04G0051 },
 	{ (USB_VID_AVERMEDIA << 16) + USB_PID_AVERMEDIA_VOLAR_X,
@@ -759,6 +766,8 @@ static const struct af9015_rc_setup af9015_rc_setup_usbids[] = {
 		RC_MAP_DIGITALNOW_TINYTWIN },
 	{ (USB_VID_GTEK << 16) + USB_PID_TINYTWIN_3,
 		RC_MAP_DIGITALNOW_TINYTWIN },
+	{ (USB_VID_KWORLD_2 << 16) + USB_PID_SVEON_STV22,
+		RC_MAP_MSI_DIGIVOX_III },
 	{ }
 };
 
@@ -1082,44 +1091,11 @@ error:
 	return ret;
 }
 
-/* init 2nd I2C adapter */
-static int af9015_i2c_init(struct dvb_usb_device *d)
-{
-	int ret;
-	struct af9015_state *state = d->priv;
-	deb_info("%s:\n", __func__);
-
-	strncpy(state->i2c_adap.name, d->desc->name,
-		sizeof(state->i2c_adap.name));
-	state->i2c_adap.algo      = d->props.i2c_algo;
-	state->i2c_adap.algo_data = NULL;
-	state->i2c_adap.dev.parent = &d->udev->dev;
-
-	i2c_set_adapdata(&state->i2c_adap, d);
-
-	ret = i2c_add_adapter(&state->i2c_adap);
-	if (ret < 0)
-		err("could not add i2c adapter");
-
-	return ret;
-}
-
 static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap)
 {
 	int ret;
-	struct af9015_state *state = adap->dev->priv;
-	struct i2c_adapter *i2c_adap;
-
-	if (adap->id == 0) {
-		/* select I2C adapter */
-		i2c_adap = &adap->dev->i2c_adap;
-
-		deb_info("%s: init I2C\n", __func__);
-		ret = af9015_i2c_init(adap->dev);
-	} else {
-		/* select I2C adapter */
-		i2c_adap = &state->i2c_adap;
 
+	if (adap->id == 1) {
 		/* copy firmware to 2nd demodulator */
 		if (af9015_config.dual_mode) {
 			ret = af9015_copy_firmware(adap->dev);
@@ -1136,7 +1112,7 @@ static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap)
 
 	/* attach demodulator */
 	adap->fe = dvb_attach(af9013_attach, &af9015_af9013_config[adap->id],
-		i2c_adap);
+		&adap->dev->i2c_adap);
 
 	return adap->fe == NULL ? -ENODEV : 0;
 }
@@ -1206,57 +1182,56 @@ static struct mxl5007t_config af9015_mxl5007t_config = {
 
 static int af9015_tuner_attach(struct dvb_usb_adapter *adap)
 {
-	struct af9015_state *state = adap->dev->priv;
-	struct i2c_adapter *i2c_adap;
 	int ret;
 	deb_info("%s:\n", __func__);
 
-	/* select I2C adapter */
-	if (adap->id == 0)
-		i2c_adap = &adap->dev->i2c_adap;
-	else
-		i2c_adap = &state->i2c_adap;
-
 	switch (af9015_af9013_config[adap->id].tuner) {
 	case AF9013_TUNER_MT2060:
 	case AF9013_TUNER_MT2060_2:
-		ret = dvb_attach(mt2060_attach, adap->fe, i2c_adap,
+		ret = dvb_attach(mt2060_attach, adap->fe, &adap->dev->i2c_adap,
 			&af9015_mt2060_config,
 			af9015_config.mt2060_if1[adap->id])
 			== NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_QT1010:
 	case AF9013_TUNER_QT1010A:
-		ret = dvb_attach(qt1010_attach, adap->fe, i2c_adap,
+		ret = dvb_attach(qt1010_attach, adap->fe, &adap->dev->i2c_adap,
 			&af9015_qt1010_config) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_TDA18271:
-		ret = dvb_attach(tda18271_attach, adap->fe, 0xc0, i2c_adap,
+		ret = dvb_attach(tda18271_attach, adap->fe, 0xc0,
+			&adap->dev->i2c_adap,
 			&af9015_tda18271_config) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_TDA18218:
-		ret = dvb_attach(tda18218_attach, adap->fe, i2c_adap,
+		ret = dvb_attach(tda18218_attach, adap->fe,
+			&adap->dev->i2c_adap,
 			&af9015_tda18218_config) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_MXL5003D:
-		ret = dvb_attach(mxl5005s_attach, adap->fe, i2c_adap,
+		ret = dvb_attach(mxl5005s_attach, adap->fe,
+			&adap->dev->i2c_adap,
 			&af9015_mxl5003_config) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_MXL5005D:
 	case AF9013_TUNER_MXL5005R:
-		ret = dvb_attach(mxl5005s_attach, adap->fe, i2c_adap,
+		ret = dvb_attach(mxl5005s_attach, adap->fe,
+			&adap->dev->i2c_adap,
 			&af9015_mxl5005_config) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_ENV77H11D5:
-		ret = dvb_attach(dvb_pll_attach, adap->fe, 0xc0, i2c_adap,
+		ret = dvb_attach(dvb_pll_attach, adap->fe, 0xc0,
+			&adap->dev->i2c_adap,
 			DVB_PLL_TDA665X) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_MC44S803:
-		ret = dvb_attach(mc44s803_attach, adap->fe, i2c_adap,
+		ret = dvb_attach(mc44s803_attach, adap->fe,
+			&adap->dev->i2c_adap,
 			&af9015_mc44s803_config) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_MXL5007T:
-		ret = dvb_attach(mxl5007t_attach, adap->fe, i2c_adap,
+		ret = dvb_attach(mxl5007t_attach, adap->fe,
+			&adap->dev->i2c_adap,
 			0xc0, &af9015_mxl5007t_config) == NULL ? -ENODEV : 0;
 		break;
 	case AF9013_TUNER_UNKNOWN:
@@ -1309,6 +1284,7 @@ static struct usb_device_id af9015_usb_table[] = {
 		USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC)},
 /* 35 */{USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850T)},
 	{USB_DEVICE(USB_VID_GTEK,      USB_PID_TINYTWIN_3)},
+	{USB_DEVICE(USB_VID_KWORLD_2,  USB_PID_SVEON_STV22)},
 	{0},
 };
 MODULE_DEVICE_TABLE(usb, af9015_usb_table);
@@ -1502,7 +1478,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 
 		.i2c_algo = &af9015_i2c_algo,
 
-		.num_device_descs = 9, /* check max from dvb-usb.h */
+		.num_device_descs = 10, /* check max from dvb-usb.h */
 		.devices = {
 			{
 				.name = "Xtensions XD-380",
@@ -1554,6 +1530,11 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 				.cold_ids = {&af9015_usb_table[20], NULL},
 				.warm_ids = {NULL},
 			},
+			{
+				.name = "Sveon STV22 Dual USB DVB-T Tuner HDTV",
+				.cold_ids = {&af9015_usb_table[37], NULL},
+				.warm_ids = {NULL},
+			},
 		}
 	}, {
 		.caps = DVB_USB_IS_AN_I2C_ADAPTER,
@@ -1704,33 +1685,11 @@ static int af9015_usb_probe(struct usb_interface *intf,
 	return ret;
 }
 
-static void af9015_i2c_exit(struct dvb_usb_device *d)
-{
-	struct af9015_state *state = d->priv;
-	deb_info("%s:\n", __func__);
-
-	/* remove 2nd I2C adapter */
-	if (d->state & DVB_USB_STATE_I2C)
-		i2c_del_adapter(&state->i2c_adap);
-}
-
-static void af9015_usb_device_exit(struct usb_interface *intf)
-{
-	struct dvb_usb_device *d = usb_get_intfdata(intf);
-	deb_info("%s:\n", __func__);
-
-	/* remove 2nd I2C adapter */
-	if (d != NULL && d->desc != NULL)
-		af9015_i2c_exit(d);
-
-	dvb_usb_device_exit(intf);
-}
-
 /* usb specific object needed to register this driver with the usb subsystem */
 static struct usb_driver af9015_usb_driver = {
 	.name = "dvb_usb_af9015",
 	.probe = af9015_usb_probe,
-	.disconnect = af9015_usb_device_exit,
+	.disconnect = dvb_usb_device_exit,
 	.id_table = af9015_usb_table,
 };
 
diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h
index beb3004..6252ea6 100644
--- a/drivers/media/dvb/dvb-usb/af9015.h
+++ b/drivers/media/dvb/dvb-usb/af9015.h
@@ -99,7 +99,6 @@ enum af9015_ir_mode {
 };
 
 struct af9015_state {
-	struct i2c_adapter i2c_adap; /* I2C adapter for 2nd FE */
 	u8 rc_repeat;
 	u32 rc_keycode;
 	u8 rc_last[4];
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index 7c327b5..2cbf19a 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -347,15 +347,17 @@ static struct isl6423_config anysee_isl6423_config = {
  * PCB: ?
  * parts: DNOS404ZH102A(MT352, DTT7579(?))
  *
- * E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=????????
- * PCB: ?
+ * E30 VID=04b4 PID=861f HW=2 FW=2.1 "anysee-T(LP)"
+ * PCB: PCB 507T (rev1.61)
  * parts: DNOS404ZH103A(ZL10353, DTT7579(?))
+ * OEA=0a OEB=00 OEC=00 OED=ff OEE=00
+ * IOA=45 IOB=ff IOC=00 IOD=ff IOE=00
  *
  * E30 Plus VID=04b4 PID=861f HW=6 FW=1.0 "anysee"
  * PCB: 507CD (rev1.1)
  * parts: DNOS404ZH103A(ZL10353, DTT7579(?)), CST56I01
- * OEA=80 OEB=00 OEC=00 OED=ff OEF=fe
- * IOA=4f IOB=ff IOC=00 IOD=06 IOF=01
+ * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe
+ * IOA=4f IOB=ff IOC=00 IOD=06 IOE=01
  * IOD[0] ZL10353 1=enabled
  * IOA[7] TS 0=enabled
  * tuner is not behind ZL10353 I2C-gate (no care if gate disabled or not)
@@ -363,30 +365,30 @@ static struct isl6423_config anysee_isl6423_config = {
  * E30 C Plus VID=04b4 PID=861f HW=10 FW=1.0 "anysee-DC(LP)"
  * PCB: 507DC (rev0.2)
  * parts: TDA10023, DTOS403IH102B TM, CST56I01
- * OEA=80 OEB=00 OEC=00 OED=ff OEF=fe
- * IOA=4f IOB=ff IOC=00 IOD=26 IOF=01
+ * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe
+ * IOA=4f IOB=ff IOC=00 IOD=26 IOE=01
  * IOD[0] TDA10023 1=enabled
  *
  * E30 S2 Plus VID=04b4 PID=861f HW=11 FW=0.1 "anysee-S2(LP)"
  * PCB: 507SI (rev2.1)
  * parts: BS2N10WCC01(CX24116, CX24118), ISL6423, TDA8024
- * OEA=80 OEB=00 OEC=ff OED=ff OEF=fe
- * IOA=4d IOB=ff IOC=00 IOD=26 IOF=01
+ * OEA=80 OEB=00 OEC=ff OED=ff OEE=fe
+ * IOA=4d IOB=ff IOC=00 IOD=26 IOE=01
  * IOD[0] CX24116 1=enabled
  *
  * E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
  * PCB: 507FA (rev0.4)
  * parts: TDA10023, DTOS403IH102B TM, TDA8024
- * OEA=80 OEB=00 OEC=ff OED=ff OEF=ff
- * IOA=4d IOB=ff IOC=00 IOD=00 IOF=c0
+ * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff
+ * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0
  * IOD[5] TDA10023 1=enabled
  * IOE[0] tuner 1=enabled
  *
  * E30 Combo Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
  * PCB: 507FA (rev1.1)
  * parts: ZL10353, TDA10023, DTOS403IH102B TM, TDA8024
- * OEA=80 OEB=00 OEC=ff OED=ff OEF=ff
- * IOA=4d IOB=ff IOC=00 IOD=00 IOF=c0
+ * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff
+ * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0
  * DVB-C:
  * IOD[5] TDA10023 1=enabled
  * IOE[0] tuner 1=enabled
@@ -398,8 +400,8 @@ static struct isl6423_config anysee_isl6423_config = {
  * E7 TC VID=1c73 PID=861f HW=18 FW=0.7 AMTCI=0.5 "anysee-E7TC(LP)"
  * PCB: 508TC (rev0.6)
  * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212)
- * OEA=80 OEB=00 OEC=03 OED=f7 OEF=ff
- * IOA=4d IOB=00 IOC=cc IOD=48 IOF=e4
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
  * IOA[7] TS 1=enabled
  * IOE[4] TDA18212 1=enabled
  * DVB-C:
@@ -414,11 +416,34 @@ static struct isl6423_config anysee_isl6423_config = {
  * E7 S2 VID=1c73 PID=861f HW=19 FW=0.4 AMTCI=0.5 "anysee-E7S2(LP)"
  * PCB: 508S2 (rev0.7)
  * parts: DNBU10512IST(STV0903, STV6110), ISL6423
- * OEA=80 OEB=00 OEC=03 OED=f7 OEF=ff
- * IOA=4d IOB=00 IOC=c4 IOD=08 IOF=e4
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4
  * IOA[7] TS 1=enabled
  * IOE[5] STV0903 1=enabled
  *
+ * E7 PTC VID=1c73 PID=861f HW=21 FW=0.1 AMTCI=?? "anysee-E7PTC(LP)"
+ * PCB: 508PTC (rev0.5)
+ * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212)
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[4] TDA18212 1=enabled
+ * DVB-C:
+ * IOD[6] ZL10353 0=disabled
+ * IOD[5] TDA10023 1=enabled
+ * IOE[0] IF 1=enabled
+ * DVB-T:
+ * IOD[5] TDA10023 0=disabled
+ * IOD[6] ZL10353 1=enabled
+ * IOE[0] IF 0=enabled
+ *
+ * E7 S2 VID=1c73 PID=861f HW=22 FW=0.1 AMTCI=?? "anysee-E7PS2(LP)"
+ * PCB: 508PS2 (rev0.4)
+ * parts: DNBU10512IST(STV0903, STV6110), ISL6423
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[5] STV0903 1=enabled
  */
 
 static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
@@ -459,7 +484,7 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
 	state->hw = hw_info[0];
 
 	switch (state->hw) {
-	case ANYSEE_HW_02: /* 2 */
+	case ANYSEE_HW_507T: /* 2 */
 		/* E30 */
 
 		/* attach demod */
@@ -593,7 +618,9 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
 
 		break;
 	case ANYSEE_HW_508TC: /* 18 */
+	case ANYSEE_HW_508PTC: /* 21 */
 		/* E7 TC */
+		/* E7 PTC */
 
 		/* enable transport stream on IOA[7] */
 		ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (1 << 7), 0x80);
@@ -650,7 +677,9 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
 
 		break;
 	case ANYSEE_HW_508S2: /* 19 */
+	case ANYSEE_HW_508PS2: /* 22 */
 		/* E7 S2 */
+		/* E7 PS2 */
 
 		/* enable transport stream on IOA[7] */
 		ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (1 << 7), 0x80);
@@ -687,7 +716,7 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
 	deb_info("%s:\n", __func__);
 
 	switch (state->hw) {
-	case ANYSEE_HW_02: /* 2 */
+	case ANYSEE_HW_507T: /* 2 */
 		/* E30 */
 
 		/* attach tuner */
@@ -762,7 +791,9 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
 
 		break;
 	case ANYSEE_HW_508TC: /* 18 */
+	case ANYSEE_HW_508PTC: /* 21 */
 		/* E7 TC */
+		/* E7 PTC */
 
 		/* enable tuner on IOE[4] */
 		ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 4), 0x10);
@@ -775,7 +806,9 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
 
 		break;
 	case ANYSEE_HW_508S2: /* 19 */
+	case ANYSEE_HW_508PS2: /* 22 */
 		/* E7 S2 */
+		/* E7 PS2 */
 
 		/* attach tuner */
 		fe = dvb_attach(stv6110_attach, adap->fe,
diff --git a/drivers/media/dvb/dvb-usb/anysee.h b/drivers/media/dvb/dvb-usb/anysee.h
index a7673aa..ad6ccd1 100644
--- a/drivers/media/dvb/dvb-usb/anysee.h
+++ b/drivers/media/dvb/dvb-usb/anysee.h
@@ -61,13 +61,15 @@ struct anysee_state {
 	u8 seq;
 };
 
-#define ANYSEE_HW_02     2 /* E30 */
-#define ANYSEE_HW_507CD  6 /* E30 Plus */
-#define ANYSEE_HW_507DC 10 /* E30 C Plus */
-#define ANYSEE_HW_507SI 11 /* E30 S2 Plus */
-#define ANYSEE_HW_507FA 15 /* E30 Combo Plus / E30 C Plus */
-#define ANYSEE_HW_508TC 18 /* E7 TC */
-#define ANYSEE_HW_508S2 19 /* E7 S2 */
+#define ANYSEE_HW_507T    2 /* E30 */
+#define ANYSEE_HW_507CD   6 /* E30 Plus */
+#define ANYSEE_HW_507DC  10 /* E30 C Plus */
+#define ANYSEE_HW_507SI  11 /* E30 S2 Plus */
+#define ANYSEE_HW_507FA  15 /* E30 Combo Plus / E30 C Plus */
+#define ANYSEE_HW_508TC  18 /* E7 TC */
+#define ANYSEE_HW_508S2  19 /* E7 S2 */
+#define ANYSEE_HW_508PTC 21 /* E7 PTC Plus */
+#define ANYSEE_HW_508PS2 22 /* E7 PS2 Plus */
 
 #define REG_IOA       0x80 /* Port A (bit addressable) */
 #define REG_IOB       0x90 /* Port B (bit addressable) */
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index c519ad5..d0ea5b6 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -17,6 +17,7 @@
 #include "mt2266.h"
 #include "tuner-xc2028.h"
 #include "xc5000.h"
+#include "xc4000.h"
 #include "s5h1411.h"
 #include "dib0070.h"
 #include "dib0090.h"
@@ -2655,6 +2656,156 @@ static int xc5000_tuner_attach(struct dvb_usb_adapter *adap)
 		== NULL ? -ENODEV : 0;
 }
 
+static int dib0700_xc4000_tuner_callback(void *priv, int component,
+					 int command, int arg)
+{
+	struct dvb_usb_adapter *adap = priv;
+
+	if (command == XC4000_TUNER_RESET) {
+		/* Reset the tuner */
+		dib7000p_set_gpio(adap->fe, 8, 0, 0);
+		msleep(10);
+		dib7000p_set_gpio(adap->fe, 8, 0, 1);
+	} else {
+		err("xc4000: unknown tuner callback command: %d\n", command);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct dibx000_agc_config stk7700p_7000p_xc4000_agc_config = {
+	.band_caps = BAND_UHF | BAND_VHF,
+	.setup = 0x64,
+	.inv_gain = 0x02c8,
+	.time_stabiliz = 0x15,
+	.alpha_level = 0x00,
+	.thlock = 0x76,
+	.wbd_inv = 0x01,
+	.wbd_ref = 0x0b33,
+	.wbd_sel = 0x00,
+	.wbd_alpha = 0x02,
+	.agc1_max = 0x00,
+	.agc1_min = 0x00,
+	.agc2_max = 0x9b26,
+	.agc2_min = 0x26ca,
+	.agc1_pt1 = 0x00,
+	.agc1_pt2 = 0x00,
+	.agc1_pt3 = 0x00,
+	.agc1_slope1 = 0x00,
+	.agc1_slope2 = 0x00,
+	.agc2_pt1 = 0x00,
+	.agc2_pt2 = 0x80,
+	.agc2_slope1 = 0x1d,
+	.agc2_slope2 = 0x1d,
+	.alpha_mant = 0x11,
+	.alpha_exp = 0x1b,
+	.beta_mant = 0x17,
+	.beta_exp = 0x33,
+	.perform_agc_softsplit = 0x00,
+};
+
+static struct dibx000_bandwidth_config stk7700p_xc4000_pll_config = {
+	60000, 30000,	/* internal, sampling */
+	1, 8, 3, 1, 0,	/* pll_cfg: prediv, ratio, range, reset, bypass */
+	0, 0, 1, 1, 0,	/* misc: refdiv, bypclk_div, IO_CLK_en_core, */
+			/* ADClkSrc, modulo */
+	(3 << 14) | (1 << 12) | 524,	/* sad_cfg: refsel, sel, freq_15k */
+	39370534,	/* ifreq */
+	20452225,	/* timf */
+	30000000	/* xtal */
+};
+
+/* FIXME: none of these inputs are validated yet */
+static struct dib7000p_config pctv_340e_config = {
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc_config_count = 1,
+	.agc = &stk7700p_7000p_xc4000_agc_config,
+	.bw  = &stk7700p_xc4000_pll_config,
+
+	.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
+};
+
+/* PCTV 340e GPIOs map:
+   dib0700:
+   GPIO2  - CX25843 sleep
+   GPIO3  - CS5340 reset
+   GPIO5  - IRD
+   GPIO6  - Power Supply
+   GPIO8  - LNA (1=off 0=on)
+   GPIO10 - CX25843 reset
+   dib7000:
+   GPIO8  - xc4000 reset
+ */
+static int pctv340e_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_state *st = adap->dev->priv;
+
+	/* Power Supply on */
+	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 0);
+	msleep(50);
+	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 1);
+	msleep(100); /* Allow power supply to settle before probing */
+
+	/* cx25843 reset */
+	dib0700_set_gpio(adap->dev, GPIO10,  GPIO_OUT, 0);
+	msleep(1); /* cx25843 datasheet say 350us required */
+	dib0700_set_gpio(adap->dev, GPIO10,  GPIO_OUT, 1);
+
+	/* LNA off for now */
+	dib0700_set_gpio(adap->dev, GPIO8,  GPIO_OUT, 1);
+
+	/* Put the CX25843 to sleep for now since we're in digital mode */
+	dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
+
+	/* FIXME: not verified yet */
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(500);
+
+	if (dib7000pc_detection(&adap->dev->i2c_adap) == 0) {
+		/* Demodulator not found for some reason? */
+		return -ENODEV;
+	}
+
+	adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x12,
+			      &pctv_340e_config);
+	st->is_dib7000pc = 1;
+
+	return adap->fe == NULL ? -ENODEV : 0;
+}
+
+static struct xc4000_config dib7000p_xc4000_tunerconfig = {
+	.i2c_address	  = 0x61,
+	.default_pm	  = 1,
+	.dvb_amplitude	  = 0,
+	.set_smoothedcvbs = 0,
+	.if_khz		  = 5400
+};
+
+static int xc4000_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct i2c_adapter *tun_i2c;
+
+	/* The xc4000 is not on the main i2c bus */
+	tun_i2c = dib7000p_get_i2c_master(adap->fe,
+					  DIBX000_I2C_INTERFACE_TUNER, 1);
+	if (tun_i2c == NULL) {
+		printk(KERN_ERR "Could not reach tuner i2c bus\n");
+		return 0;
+	}
+
+	/* Setup the reset callback */
+	adap->fe->callback = dib0700_xc4000_tuner_callback;
+
+	return dvb_attach(xc4000_attach, adap->fe, tun_i2c,
+			  &dib7000p_xc4000_tunerconfig)
+		== NULL ? -ENODEV : 0;
+}
+
 static struct lgdt3305_config hcw_lgdt3305_config = {
 	.i2c_addr           = 0x0e,
 	.mpeg_mode          = LGDT3305_MPEG_PARALLEL,
@@ -2802,6 +2953,8 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_TFE7090PVR) },
 	{ USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2) },
 /* 75 */{ USB_DEVICE(USB_VID_MEDION,    USB_PID_CREATIX_CTX1921) },
+	{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV340E) },
+	{ USB_DEVICE(USB_VID_PINNACLE,  USB_PID_PINNACLE_PCTV340E_SE) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -3772,6 +3925,41 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 					    RC_TYPE_NEC,
 			.change_protocol  = dib0700_change_protocol,
 		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.frontend_attach  = pctv340e_frontend_attach,
+				.tuner_attach     = xc4000_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv = sizeof(struct
+						dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 2,
+		.devices = {
+			{   "Pinnacle PCTV 340e HD Pro USB Stick",
+				{ &dib0700_usb_id_table[76], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV Hybrid Stick Solo",
+				{ &dib0700_usb_id_table[77], NULL },
+				{ NULL },
+			},
+		},
+		.rc.core = {
+			.rc_interval      = DEFAULT_RC_INTERVAL,
+			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
+			.module_name	  = "dib0700",
+			.rc_query         = dib0700_rc_query_old_firmware,
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
+		},
 	},
 };
 
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 21b1549..2a79b8f 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -230,6 +230,8 @@
 #define USB_PID_PINNACLE_PCTV310E			0x3211
 #define USB_PID_PINNACLE_PCTV801E			0x023a
 #define USB_PID_PINNACLE_PCTV801E_SE			0x023b
+#define USB_PID_PINNACLE_PCTV340E			0x023d
+#define USB_PID_PINNACLE_PCTV340E_SE			0x023e
 #define USB_PID_PINNACLE_PCTV73A			0x0243
 #define USB_PID_PINNACLE_PCTV73ESE			0x0245
 #define USB_PID_PINNACLE_PCTV74E			0x0246
@@ -313,6 +315,7 @@
 #define USB_PID_FRIIO_WHITE				0x0001
 #define USB_PID_TVWAY_PLUS				0x0002
 #define USB_PID_SVEON_STV20				0xe39d
+#define USB_PID_SVEON_STV22				0xe401
 #define USB_PID_AZUREWAVE_AZ6027			0x3275
 #define USB_PID_TERRATEC_DVBS2CI_V1			0x10a4
 #define USB_PID_TERRATEC_DVBS2CI_V2			0x10ac
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 76a8096..7d35d07 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -85,7 +85,7 @@ static inline u8 rc5_data(struct rc_map_table *key)
 	return key->scancode & 0xff;
 }
 
-static inline u8 rc5_scan(struct rc_map_table *key)
+static inline u16 rc5_scan(struct rc_map_table *key)
 {
 	return key->scancode & 0xffff;
 }
diff --git a/drivers/media/dvb/dvb-usb/gp8psk.h b/drivers/media/dvb/dvb-usb/gp8psk.h
index 831749a..ed32b9d 100644
--- a/drivers/media/dvb/dvb-usb/gp8psk.h
+++ b/drivers/media/dvb/dvb-usb/gp8psk.h
@@ -78,9 +78,6 @@ extern int dvb_usb_gp8psk_debug;
 #define ADV_MOD_DVB_BPSK 9     /* DVB-S BPSK */
 
 #define GET_USB_SPEED                     0x07
- #define USB_SPEED_LOW                    0
- #define USB_SPEED_FULL                   1
- #define USB_SPEED_HIGH                   2
 
 #define RESET_FX2                         0x13
 
diff --git a/drivers/media/dvb/dvb-usb/technisat-usb2.c b/drivers/media/dvb/dvb-usb/technisat-usb2.c
index 08f8842..473b95e 100644
--- a/drivers/media/dvb/dvb-usb/technisat-usb2.c
+++ b/drivers/media/dvb/dvb-usb/technisat-usb2.c
@@ -765,10 +765,8 @@ static void technisat_usb2_disconnect(struct usb_interface *intf)
 	/* work and stuff was only created when the device is is hot-state */
 	if (dev != NULL) {
 		struct technisat_usb2_state *state = dev->priv;
-		if (state != NULL) {
+		if (state != NULL)
 			cancel_delayed_work_sync(&state->green_led_work);
-			flush_scheduled_work();
-		}
 	}
 
 	dvb_usb_device_exit(intf);
diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/dvb/dvb-usb/vp7045.c
index 3db89e3..536c16c 100644
--- a/drivers/media/dvb/dvb-usb/vp7045.c
+++ b/drivers/media/dvb/dvb-usb/vp7045.c
@@ -224,26 +224,8 @@ static struct dvb_usb_device_properties vp7045_properties;
 static int vp7045_usb_probe(struct usb_interface *intf,
 		const struct usb_device_id *id)
 {
-	struct dvb_usb_device *d;
-	int ret = dvb_usb_device_init(intf, &vp7045_properties,
-				   THIS_MODULE, &d, adapter_nr);
-	if (ret)
-		return ret;
-
-	d->priv = kmalloc(20, GFP_KERNEL);
-	if (!d->priv) {
-		dvb_usb_device_exit(intf);
-		return -ENOMEM;
-	}
-
-	return ret;
-}
-
-static void vp7045_usb_disconnect(struct usb_interface *intf)
-{
-	struct dvb_usb_device *d = usb_get_intfdata(intf);
-	kfree(d->priv);
-	dvb_usb_device_exit(intf);
+	return dvb_usb_device_init(intf, &vp7045_properties,
+				   THIS_MODULE, NULL, adapter_nr);
 }
 
 static struct usb_device_id vp7045_usb_table [] = {
@@ -258,7 +240,7 @@ MODULE_DEVICE_TABLE(usb, vp7045_usb_table);
 static struct dvb_usb_device_properties vp7045_properties = {
 	.usb_ctrl = CYPRESS_FX2,
 	.firmware = "dvb-usb-vp7045-01.fw",
-	.size_of_priv = sizeof(u8 *),
+	.size_of_priv = 20,
 
 	.num_adapters = 1,
 	.adapter = {
@@ -305,7 +287,7 @@ static struct dvb_usb_device_properties vp7045_properties = {
 static struct usb_driver vp7045_usb_driver = {
 	.name		= "dvb_usb_vp7045",
 	.probe		= vp7045_usb_probe,
-	.disconnect	= vp7045_usb_disconnect,
+	.disconnect	= dvb_usb_device_exit,
 	.id_table	= vp7045_usb_table,
 };
 
diff --git a/drivers/media/dvb/dvb-usb/vp7045.h b/drivers/media/dvb/dvb-usb/vp7045.h
index 969688f..cf5ec46 100644
--- a/drivers/media/dvb/dvb-usb/vp7045.h
+++ b/drivers/media/dvb/dvb-usb/vp7045.h
@@ -36,9 +36,6 @@
  #define Tuner_Power_OFF                  0
 
 #define GET_USB_SPEED                     0x07
- #define USB_SPEED_LOW                    0
- #define USB_SPEED_FULL                   1
- #define USB_SPEED_HIGH                   2
 
 #define LOCK_TUNER_COMMAND                0x09