diff options
author | Mauro Carvalho Chehab <mchehab@redhat.com> | 2013-01-24 10:25:16 -0300 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2013-01-24 14:28:14 -0200 |
commit | d9b6f08a7f756d2d5105f5aaf23c326f41a0683b (patch) | |
tree | bf38863daa8cbf1e3728ec5d34924f0a04dd3627 /drivers/media/dvb-frontends | |
parent | 313cf4efa40ef739199bd68a76f89f8a5224a541 (diff) | |
download | op-kernel-dev-d9b6f08a7f756d2d5105f5aaf23c326f41a0683b.zip op-kernel-dev-d9b6f08a7f756d2d5105f5aaf23c326f41a0683b.tar.gz |
[media] mb86a20s: add a logic for post-BER measurement
The logic here is similar to the preBER.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media/dvb-frontends')
-rw-r--r-- | drivers/media/dvb-frontends/mb86a20s.c | 220 |
1 files changed, 196 insertions, 24 deletions
diff --git a/drivers/media/dvb-frontends/mb86a20s.c b/drivers/media/dvb-frontends/mb86a20s.c index 7d4e911..ed39ee1 100644 --- a/drivers/media/dvb-frontends/mb86a20s.c +++ b/drivers/media/dvb-frontends/mb86a20s.c @@ -104,13 +104,20 @@ static struct regdata mb86a20s_init[] = { { 0x50, 0xae }, { 0x51, 0xff }, { 0x50, 0xaf }, { 0x51, 0xff }, - { 0x5e, 0x00 }, /* Turn off BER after Viterbi */ - { 0x50, 0xdc }, { 0x51, 0x01 }, - { 0x50, 0xdd }, { 0x51, 0xf4 }, - { 0x50, 0xde }, { 0x51, 0x01 }, - { 0x50, 0xdf }, { 0x51, 0xf4 }, - { 0x50, 0xe0 }, { 0x51, 0x01 }, - { 0x50, 0xe1 }, { 0x51, 0xf4 }, + /* + * On this demod, post BER counts blocks. When the count reaches the + * value below, it collects the block error count. The block counters + * are initialized to 127 here. This warrants that all of them will be + * quickly calculated when device gets locked. As TMCC is parsed, the + * values will be adjusted later in the driver's code. + */ + { 0x5e, 0x07 }, /* Turn on BER after Viterbi */ + { 0x50, 0xdc }, { 0x51, 0x00 }, + { 0x50, 0xdd }, { 0x51, 0x7f }, + { 0x50, 0xde }, { 0x51, 0x00 }, + { 0x50, 0xdf }, { 0x51, 0x7f }, + { 0x50, 0xe0 }, { 0x51, 0x00 }, + { 0x50, 0xe1 }, { 0x51, 0x7f }, /* * On this demod, when the block count reaches the count below, @@ -187,12 +194,13 @@ static struct regdata mb86a20s_reset_reception[] = { { 0x08, 0x00 }, }; -static struct regdata mb86a20s_vber_reset[] = { - { 0x53, 0x00 }, /* VBER Counter reset */ +static struct regdata mb86a20s_per_ber_reset[] = { + { 0x53, 0x00 }, /* pre BER Counter reset */ { 0x53, 0x07 }, -}; -static struct regdata mb86a20s_per_reset[] = { + { 0x5f, 0x00 }, /* post BER Counter reset */ + { 0x5f, 0x07 }, + { 0x50, 0xb1 }, /* PER Counter reset */ { 0x51, 0x07 }, { 0x51, 0x00 }, @@ -731,6 +739,8 @@ static int mb86a20s_reset_counters(struct dvb_frontend *fe) memset(&c->cnr, 0, sizeof(c->cnr)); memset(&c->pre_bit_error, 0, sizeof(c->pre_bit_error)); memset(&c->pre_bit_count, 0, sizeof(c->pre_bit_count)); + memset(&c->post_bit_error, 0, sizeof(c->post_bit_error)); + memset(&c->post_bit_count, 0, sizeof(c->post_bit_count)); memset(&c->block_error, 0, sizeof(c->block_error)); memset(&c->block_count, 0, sizeof(c->block_count)); @@ -739,13 +749,8 @@ static int mb86a20s_reset_counters(struct dvb_frontend *fe) /* Clear status for most stats */ - /* BER counter reset */ - rc = mb86a20s_writeregdata(state, mb86a20s_vber_reset); - if (rc < 0) - goto err; - - /* MER, PER counter reset */ - rc = mb86a20s_writeregdata(state, mb86a20s_per_reset); + /* BER/PER counter reset */ + rc = mb86a20s_writeregdata(state, mb86a20s_per_ber_reset); if (rc < 0) goto err; @@ -915,7 +920,124 @@ static int mb86a20s_get_pre_ber(struct dvb_frontend *fe, rc = mb86a20s_writereg(state, 0x53, val | (1 << layer)); } + return rc; +} + +static int mb86a20s_get_post_ber(struct dvb_frontend *fe, + unsigned layer, + u32 *error, u32 *count) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + u32 counter, collect_rate; + int rc, val; + + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + if (layer >= 3) + return -EINVAL; + + /* Check if the BER measures are already available */ + rc = mb86a20s_readreg(state, 0x60); + if (rc < 0) + return rc; + + /* Check if data is available for that layer */ + if (!(rc & (1 << layer))) { + dev_dbg(&state->i2c->dev, + "%s: post BER for layer %c is not available yet.\n", + __func__, 'A' + layer); + return -EBUSY; + } + /* Read Bit Error Count */ + rc = mb86a20s_readreg(state, 0x64 + layer * 3); + if (rc < 0) + return rc; + *error = rc << 16; + rc = mb86a20s_readreg(state, 0x65 + layer * 3); + if (rc < 0) + return rc; + *error |= rc << 8; + rc = mb86a20s_readreg(state, 0x66 + layer * 3); + if (rc < 0) + return rc; + *error |= rc; + + dev_dbg(&state->i2c->dev, + "%s: post bit error for layer %c: %d.\n", + __func__, 'A' + layer, *error); + + /* Read Bit Count */ + rc = mb86a20s_writereg(state, 0x50, 0xdc + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + counter = rc << 8; + rc = mb86a20s_writereg(state, 0x50, 0xdd + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + counter |= rc; + *count = counter * 204 * 8; + + dev_dbg(&state->i2c->dev, + "%s: post bit count for layer %c: %d.\n", + __func__, 'A' + layer, *count); + + /* + * As we get TMCC data from the frontend, we can better estimate the + * BER bit counters, in order to do the BER measure during a longer + * time. Use those data, if available, to update the bit count + * measure. + */ + + if (!state->estimated_rate[layer]) + goto reset_measurement; + + collect_rate = state->estimated_rate[layer] / 204 / 8; + if (collect_rate < 32) + collect_rate = 32; + if (collect_rate > 65535) + collect_rate = 65535; + if (collect_rate != counter) { + dev_dbg(&state->i2c->dev, + "%s: updating postBER counter on layer %c to %d.\n", + __func__, 'A' + layer, collect_rate); + + /* Turn off BER after Viterbi */ + rc = mb86a20s_writereg(state, 0x5e, 0x00); + + /* Update counter for this layer */ + rc = mb86a20s_writereg(state, 0x50, 0xdc + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, collect_rate >> 8); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x50, 0xdd + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, collect_rate & 0xff); + if (rc < 0) + return rc; + + /* Turn on BER after Viterbi */ + rc = mb86a20s_writereg(state, 0x5e, 0x07); + + /* Reset all preBER counters */ + rc = mb86a20s_writereg(state, 0x5f, 0x00); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x5f, 0x07); + + return rc; + } + +reset_measurement: /* Reset counter to collect new data */ rc = mb86a20s_readreg(state, 0x5f); if (rc < 0) @@ -924,7 +1046,7 @@ static int mb86a20s_get_pre_ber(struct dvb_frontend *fe, rc = mb86a20s_writereg(state, 0x5f, val & ~(1 << layer)); if (rc < 0) return rc; - rc = mb86a20s_writereg(state, 0x5f, val); + rc = mb86a20s_writereg(state, 0x5f, val | (1 << layer)); return rc; } @@ -1417,6 +1539,8 @@ static void mb86a20s_stats_not_ready(struct dvb_frontend *fe) c->cnr.len = 4; c->pre_bit_error.len = 4; c->pre_bit_count.len = 4; + c->post_bit_error.len = 4; + c->post_bit_count.len = 4; c->block_error.len = 4; c->block_count.len = 4; @@ -1429,6 +1553,8 @@ static void mb86a20s_stats_not_ready(struct dvb_frontend *fe) c->cnr.stat[i].scale = FE_SCALE_NOT_AVAILABLE; c->pre_bit_error.stat[i].scale = FE_SCALE_NOT_AVAILABLE; c->pre_bit_count.stat[i].scale = FE_SCALE_NOT_AVAILABLE; + c->post_bit_error.stat[i].scale = FE_SCALE_NOT_AVAILABLE; + c->post_bit_count.stat[i].scale = FE_SCALE_NOT_AVAILABLE; c->block_error.stat[i].scale = FE_SCALE_NOT_AVAILABLE; c->block_count.stat[i].scale = FE_SCALE_NOT_AVAILABLE; } @@ -1441,9 +1567,11 @@ static int mb86a20s_get_stats(struct dvb_frontend *fe) int rc = 0, i; u32 bit_error = 0, bit_count = 0; u32 t_pre_bit_error = 0, t_pre_bit_count = 0; + u32 t_post_bit_error = 0, t_post_bit_count = 0; u32 block_error = 0, block_count = 0; u32 t_block_error = 0, t_block_count = 0; - int active_layers = 0, ber_layers = 0, per_layers = 0; + int active_layers = 0, pre_ber_layers = 0, post_ber_layers = 0; + int per_layers = 0; dev_dbg(&state->i2c->dev, "%s called.\n", __func__); @@ -1457,7 +1585,6 @@ static int mb86a20s_get_stats(struct dvb_frontend *fe) /* Layer is active and has rc segments */ active_layers++; - /* Read per-layer BER */ /* Handle BER before vterbi */ rc = mb86a20s_get_pre_ber(fe, i, &bit_error, &bit_count); @@ -1479,7 +1606,30 @@ static int mb86a20s_get_stats(struct dvb_frontend *fe) } if (c->block_error.stat[1 + i].scale != FE_SCALE_NOT_AVAILABLE) - ber_layers++; + pre_ber_layers++; + + /* Handle BER post vterbi */ + rc = mb86a20s_get_post_ber(fe, i, + &bit_error, &bit_count); + if (rc >= 0) { + c->post_bit_error.stat[1 + i].scale = FE_SCALE_COUNTER; + c->post_bit_error.stat[1 + i].uvalue += bit_error; + c->post_bit_count.stat[1 + i].scale = FE_SCALE_COUNTER; + c->post_bit_count.stat[1 + i].uvalue += bit_count; + } else if (rc != -EBUSY) { + /* + * If an I/O error happened, + * measures are now unavailable + */ + c->post_bit_error.stat[1 + i].scale = FE_SCALE_NOT_AVAILABLE; + c->post_bit_count.stat[1 + i].scale = FE_SCALE_NOT_AVAILABLE; + dev_err(&state->i2c->dev, + "%s: Can't get BER for layer %c (error %d).\n", + __func__, 'A' + i, rc); + } + + if (c->block_error.stat[1 + i].scale != FE_SCALE_NOT_AVAILABLE) + post_ber_layers++; /* Handle Block errors for PER/UCB reports */ rc = mb86a20s_get_blk_error(fe, i, @@ -1506,10 +1656,14 @@ static int mb86a20s_get_stats(struct dvb_frontend *fe) if (c->block_error.stat[1 + i].scale != FE_SCALE_NOT_AVAILABLE) per_layers++; - /* Update total BER */ + /* Update total preBER */ t_pre_bit_error += c->pre_bit_error.stat[1 + i].uvalue; t_pre_bit_count += c->pre_bit_count.stat[1 + i].uvalue; + /* Update total postBER */ + t_post_bit_error += c->post_bit_error.stat[1 + i].uvalue; + t_post_bit_count += c->post_bit_count.stat[1 + i].uvalue; + /* Update total PER */ t_block_error += c->block_error.stat[1 + i].uvalue; t_block_count += c->block_count.stat[1 + i].uvalue; @@ -1520,7 +1674,7 @@ static int mb86a20s_get_stats(struct dvb_frontend *fe) * Start showing global count if at least one error count is * available. */ - if (ber_layers) { + if (pre_ber_layers) { /* * At least one per-layer BER measure was read. We can now * calculate the total BER @@ -1534,6 +1688,24 @@ static int mb86a20s_get_stats(struct dvb_frontend *fe) c->pre_bit_count.stat[0].uvalue = t_pre_bit_count; } + /* + * Start showing global count if at least one error count is + * available. + */ + if (post_ber_layers) { + /* + * At least one per-layer BER measure was read. We can now + * calculate the total BER + * + * Total Bit Error/Count is calculated as the sum of the + * bit errors on all active layers. + */ + c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; + c->post_bit_error.stat[0].uvalue = t_post_bit_error; + c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; + c->post_bit_count.stat[0].uvalue = t_post_bit_count; + } + if (per_layers) { /* * At least one per-layer UCB measure was read. We can now |