diff options
| author | NeilBrown <neilb@suse.de> | 2014-01-14 15:55:14 +1100 |
|---|---|---|
| committer | NeilBrown <neilb@suse.de> | 2014-01-14 16:44:21 +1100 |
| commit | 7eb418851f3278de67126ea0c427641ab4792c57 (patch) | |
| tree | 6faa679f307ec0d333765bc87baa50021ebd9959 /drivers/md | |
| parent | f466722ca614edcd14f3337373f33132117c7612 (diff) | |
| download | op-kernel-dev-7eb418851f3278de67126ea0c427641ab4792c57.zip op-kernel-dev-7eb418851f3278de67126ea0c427641ab4792c57.tar.gz | |
md: allow a partially recovered device to be hot-added to an array.
When adding a new device into an array it is normally important to
clear any stale data from ->recovery_offset else the new device may
not be recovered properly.
However when re-adding a device which is known to be nearly in-sync,
this is not needed and can be detrimental. The (bitmap-based)
resync will still happen, and further recovery is only needed from
where-ever it was already up to.
So if save_raid_disk is set, signifying a re-add, don't clear
->recovery_offset.
Signed-off-by: NeilBrown <neilb@suse.de>
Diffstat (limited to 'drivers/md')
| -rw-r--r-- | drivers/md/md.c | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/drivers/md/md.c b/drivers/md/md.c index 539f088..757e388 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -7736,7 +7736,8 @@ static int remove_and_add_spares(struct mddev *mddev, !test_bit(Bitmap_sync, &rdev->flags))) continue; - rdev->recovery_offset = 0; + if (rdev->saved_raid_disk < 0) + rdev->recovery_offset = 0; if (mddev->pers-> hot_add_disk(mddev, rdev) == 0) { if (sysfs_link_rdev(mddev, rdev)) |
