Merge git://git.infradead.org/users/dwmw2/libraid-2.6 into for-linus

14 files changed, 1 insertions, 1605 deletions

diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index 4a6feac..bf1a95e3 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -121,7 +121,7 @@ config MD_RAID10
 config MD_RAID456
 	tristate "RAID-4/RAID-5/RAID-6 mode"
 	depends on BLK_DEV_MD
-	select MD_RAID6_PQ
+	select RAID6_PQ
 	select ASYNC_MEMCPY
 	select ASYNC_XOR
 	select ASYNC_PQ
@@ -165,22 +165,6 @@ config MULTICORE_RAID456
 
 	  If unsure, say N.
 
-config MD_RAID6_PQ
-	tristate
-
-config ASYNC_RAID6_TEST
-	tristate "Self test for hardware accelerated raid6 recovery"
-	depends on MD_RAID6_PQ
-	select ASYNC_RAID6_RECOV
-	---help---
-	  This is a one-shot self test that permutes through the
-	  recovery of all the possible two disk failure scenarios for a
-	  N-disk array.  Recovery is performed with the asynchronous
-	  raid6 recovery routines, and will optionally use an offload
-	  engine if one is available.
-
-	  If unsure, say N.
-
 config MD_MULTIPATH
 	tristate "Multipath I/O support"
 	depends on BLK_DEV_MD
diff --git a/drivers/md/Makefile b/drivers/md/Makefile
index e355e7f..5e3aac4 100644
--- a/drivers/md/Makefile
+++ b/drivers/md/Makefile
@@ -12,13 +12,6 @@ dm-log-userspace-y \
 		+= dm-log-userspace-base.o dm-log-userspace-transfer.o
 md-mod-y	+= md.o bitmap.o
 raid456-y	+= raid5.o
-raid6_pq-y	+= raid6algos.o raid6recov.o raid6tables.o \
-		   raid6int1.o raid6int2.o raid6int4.o \
-		   raid6int8.o raid6int16.o raid6int32.o \
-		   raid6altivec1.o raid6altivec2.o raid6altivec4.o \
-		   raid6altivec8.o \
-		   raid6mmx.o raid6sse1.o raid6sse2.o
-hostprogs-y	+= mktables
 
 # Note: link order is important.  All raid personalities
 # and must come before md.o, as they each initialise 
@@ -29,7 +22,6 @@ obj-$(CONFIG_MD_LINEAR)		+= linear.o
 obj-$(CONFIG_MD_RAID0)		+= raid0.o
 obj-$(CONFIG_MD_RAID1)		+= raid1.o
 obj-$(CONFIG_MD_RAID10)		+= raid10.o
-obj-$(CONFIG_MD_RAID6_PQ)	+= raid6_pq.o
 obj-$(CONFIG_MD_RAID456)	+= raid456.o
 obj-$(CONFIG_MD_MULTIPATH)	+= multipath.o
 obj-$(CONFIG_MD_FAULTY)		+= faulty.o
@@ -45,75 +37,6 @@ obj-$(CONFIG_DM_MIRROR)		+= dm-mirror.o dm-log.o dm-region-hash.o
 obj-$(CONFIG_DM_LOG_USERSPACE)	+= dm-log-userspace.o
 obj-$(CONFIG_DM_ZERO)		+= dm-zero.o
 
-quiet_cmd_unroll = UNROLL  $@
-      cmd_unroll = $(AWK) -f$(srctree)/$(src)/unroll.awk -vN=$(UNROLL) \
-                   < $< > $@ || ( rm -f $@ && exit 1 )
-
-ifeq ($(CONFIG_ALTIVEC),y)
-altivec_flags := -maltivec -mabi=altivec
-endif
-
 ifeq ($(CONFIG_DM_UEVENT),y)
 dm-mod-objs			+= dm-uevent.o
 endif
-
-targets += raid6int1.c
-$(obj)/raid6int1.c:   UNROLL := 1
-$(obj)/raid6int1.c:   $(src)/raid6int.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-targets += raid6int2.c
-$(obj)/raid6int2.c:   UNROLL := 2
-$(obj)/raid6int2.c:   $(src)/raid6int.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-targets += raid6int4.c
-$(obj)/raid6int4.c:   UNROLL := 4
-$(obj)/raid6int4.c:   $(src)/raid6int.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-targets += raid6int8.c
-$(obj)/raid6int8.c:   UNROLL := 8
-$(obj)/raid6int8.c:   $(src)/raid6int.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-targets += raid6int16.c
-$(obj)/raid6int16.c:  UNROLL := 16
-$(obj)/raid6int16.c:  $(src)/raid6int.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-targets += raid6int32.c
-$(obj)/raid6int32.c:  UNROLL := 32
-$(obj)/raid6int32.c:  $(src)/raid6int.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-CFLAGS_raid6altivec1.o += $(altivec_flags)
-targets += raid6altivec1.c
-$(obj)/raid6altivec1.c:   UNROLL := 1
-$(obj)/raid6altivec1.c:   $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-CFLAGS_raid6altivec2.o += $(altivec_flags)
-targets += raid6altivec2.c
-$(obj)/raid6altivec2.c:   UNROLL := 2
-$(obj)/raid6altivec2.c:   $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-CFLAGS_raid6altivec4.o += $(altivec_flags)
-targets += raid6altivec4.c
-$(obj)/raid6altivec4.c:   UNROLL := 4
-$(obj)/raid6altivec4.c:   $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-CFLAGS_raid6altivec8.o += $(altivec_flags)
-targets += raid6altivec8.c
-$(obj)/raid6altivec8.c:   UNROLL := 8
-$(obj)/raid6altivec8.c:   $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
-	$(call if_changed,unroll)
-
-quiet_cmd_mktable = TABLE   $@
-      cmd_mktable = $(obj)/mktables > $@ || ( rm -f $@ && exit 1 )
-
-targets += raid6tables.c
-$(obj)/raid6tables.c: $(obj)/mktables FORCE
-	$(call if_changed,mktable)
diff --git a/drivers/md/mktables.c b/drivers/md/mktables.c
deleted file mode 100644
index 3b15008..0000000
--- a/drivers/md/mktables.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- *   Copyright 2002-2007 H. Peter Anvin - All Rights Reserved
- *
- *   This file is part of the Linux kernel, and is made available under
- *   the terms of the GNU General Public License version 2 or (at your
- *   option) any later version; incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * mktables.c
- *
- * Make RAID-6 tables.  This is a host user space program to be run at
- * compile time.
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <inttypes.h>
-#include <stdlib.h>
-#include <time.h>
-
-static uint8_t gfmul(uint8_t a, uint8_t b)
-{
-	uint8_t v = 0;
-
-	while (b) {
-		if (b & 1)
-			v ^= a;
-		a = (a << 1) ^ (a & 0x80 ? 0x1d : 0);
-		b >>= 1;
-	}
-
-	return v;
-}
-
-static uint8_t gfpow(uint8_t a, int b)
-{
-	uint8_t v = 1;
-
-	b %= 255;
-	if (b < 0)
-		b += 255;
-
-	while (b) {
-		if (b & 1)
-			v = gfmul(v, a);
-		a = gfmul(a, a);
-		b >>= 1;
-	}
-
-	return v;
-}
-
-int main(int argc, char *argv[])
-{
-	int i, j, k;
-	uint8_t v;
-	uint8_t exptbl[256], invtbl[256];
-
-	printf("#include <linux/raid/pq.h>\n");
-
-	/* Compute multiplication table */
-	printf("\nconst u8  __attribute__((aligned(256)))\n"
-		"raid6_gfmul[256][256] =\n"
-		"{\n");
-	for (i = 0; i < 256; i++) {
-		printf("\t{\n");
-		for (j = 0; j < 256; j += 8) {
-			printf("\t\t");
-			for (k = 0; k < 8; k++)
-				printf("0x%02x,%c", gfmul(i, j + k),
-				       (k == 7) ? '\n' : ' ');
-		}
-		printf("\t},\n");
-	}
-	printf("};\n");
-	printf("#ifdef __KERNEL__\n");
-	printf("EXPORT_SYMBOL(raid6_gfmul);\n");
-	printf("#endif\n");
-
-	/* Compute power-of-2 table (exponent) */
-	v = 1;
-	printf("\nconst u8 __attribute__((aligned(256)))\n"
-	       "raid6_gfexp[256] =\n" "{\n");
-	for (i = 0; i < 256; i += 8) {
-		printf("\t");
-		for (j = 0; j < 8; j++) {
-			exptbl[i + j] = v;
-			printf("0x%02x,%c", v, (j == 7) ? '\n' : ' ');
-			v = gfmul(v, 2);
-			if (v == 1)
-				v = 0;	/* For entry 255, not a real entry */
-		}
-	}
-	printf("};\n");
-	printf("#ifdef __KERNEL__\n");
-	printf("EXPORT_SYMBOL(raid6_gfexp);\n");
-	printf("#endif\n");
-
-	/* Compute inverse table x^-1 == x^254 */
-	printf("\nconst u8 __attribute__((aligned(256)))\n"
-	       "raid6_gfinv[256] =\n" "{\n");
-	for (i = 0; i < 256; i += 8) {
-		printf("\t");
-		for (j = 0; j < 8; j++) {
-			invtbl[i + j] = v = gfpow(i + j, 254);
-			printf("0x%02x,%c", v, (j == 7) ? '\n' : ' ');
-		}
-	}
-	printf("};\n");
-	printf("#ifdef __KERNEL__\n");
-	printf("EXPORT_SYMBOL(raid6_gfinv);\n");
-	printf("#endif\n");
-
-	/* Compute inv(2^x + 1) (exponent-xor-inverse) table */
-	printf("\nconst u8 __attribute__((aligned(256)))\n"
-	       "raid6_gfexi[256] =\n" "{\n");
-	for (i = 0; i < 256; i += 8) {
-		printf("\t");
-		for (j = 0; j < 8; j++)
-			printf("0x%02x,%c", invtbl[exptbl[i + j] ^ 1],
-			       (j == 7) ? '\n' : ' ');
-	}
-	printf("};\n");
-	printf("#ifdef __KERNEL__\n");
-	printf("EXPORT_SYMBOL(raid6_gfexi);\n");
-	printf("#endif\n");
-
-	return 0;
-}
diff --git a/drivers/md/raid6algos.c b/drivers/md/raid6algos.c
deleted file mode 100644
index 1f8784b..0000000
--- a/drivers/md/raid6algos.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- *   Copyright 2002 H. Peter Anvin - All Rights Reserved
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation, Inc., 53 Temple Place Ste 330,
- *   Boston MA 02111-1307, USA; either version 2 of the License, or
- *   (at your option) any later version; incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * raid6algos.c
- *
- * Algorithm list and algorithm selection for RAID-6
- */
-
-#include <linux/raid/pq.h>
-#include <linux/gfp.h>
-#ifndef __KERNEL__
-#include <sys/mman.h>
-#include <stdio.h>
-#else
-#if !RAID6_USE_EMPTY_ZERO_PAGE
-/* In .bss so it's zeroed */
-const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256)));
-EXPORT_SYMBOL(raid6_empty_zero_page);
-#endif
-#endif
-
-struct raid6_calls raid6_call;
-EXPORT_SYMBOL_GPL(raid6_call);
-
-const struct raid6_calls * const raid6_algos[] = {
-	&raid6_intx1,
-	&raid6_intx2,
-	&raid6_intx4,
-	&raid6_intx8,
-#if defined(__ia64__)
-	&raid6_intx16,
-	&raid6_intx32,
-#endif
-#if defined(__i386__) && !defined(__arch_um__)
-	&raid6_mmxx1,
-	&raid6_mmxx2,
-	&raid6_sse1x1,
-	&raid6_sse1x2,
-	&raid6_sse2x1,
-	&raid6_sse2x2,
-#endif
-#if defined(__x86_64__) && !defined(__arch_um__)
-	&raid6_sse2x1,
-	&raid6_sse2x2,
-	&raid6_sse2x4,
-#endif
-#ifdef CONFIG_ALTIVEC
-	&raid6_altivec1,
-	&raid6_altivec2,
-	&raid6_altivec4,
-	&raid6_altivec8,
-#endif
-	NULL
-};
-
-#ifdef __KERNEL__
-#define RAID6_TIME_JIFFIES_LG2	4
-#else
-/* Need more time to be stable in userspace */
-#define RAID6_TIME_JIFFIES_LG2	9
-#define time_before(x, y) ((x) < (y))
-#endif
-
-/* Try to pick the best algorithm */
-/* This code uses the gfmul table as convenient data set to abuse */
-
-int __init raid6_select_algo(void)
-{
-	const struct raid6_calls * const * algo;
-	const struct raid6_calls * best;
-	char *syndromes;
-	void *dptrs[(65536/PAGE_SIZE)+2];
-	int i, disks;
-	unsigned long perf, bestperf;
-	int bestprefer;
-	unsigned long j0, j1;
-
-	disks = (65536/PAGE_SIZE)+2;
-	for ( i = 0 ; i < disks-2 ; i++ ) {
-		dptrs[i] = ((char *)raid6_gfmul) + PAGE_SIZE*i;
-	}
-
-	/* Normal code - use a 2-page allocation to avoid D$ conflict */
-	syndromes = (void *) __get_free_pages(GFP_KERNEL, 1);
-
-	if ( !syndromes ) {
-		printk("raid6: Yikes!  No memory available.\n");
-		return -ENOMEM;
-	}
-
-	dptrs[disks-2] = syndromes;
-	dptrs[disks-1] = syndromes + PAGE_SIZE;
-
-	bestperf = 0;  bestprefer = 0;  best = NULL;
-
-	for ( algo = raid6_algos ; *algo ; algo++ ) {
-		if ( !(*algo)->valid || (*algo)->valid() ) {
-			perf = 0;
-
-			preempt_disable();
-			j0 = jiffies;
-			while ( (j1 = jiffies) == j0 )
-				cpu_relax();
-			while (time_before(jiffies,
-					    j1 + (1<<RAID6_TIME_JIFFIES_LG2))) {
-				(*algo)->gen_syndrome(disks, PAGE_SIZE, dptrs);
-				perf++;
-			}
-			preempt_enable();
-
-			if ( (*algo)->prefer > bestprefer ||
-			     ((*algo)->prefer == bestprefer &&
-			      perf > bestperf) ) {
-				best = *algo;
-				bestprefer = best->prefer;
-				bestperf = perf;
-			}
-			printk("raid6: %-8s %5ld MB/s\n", (*algo)->name,
-			       (perf*HZ) >> (20-16+RAID6_TIME_JIFFIES_LG2));
-		}
-	}
-
-	if (best) {
-		printk("raid6: using algorithm %s (%ld MB/s)\n",
-		       best->name,
-		       (bestperf*HZ) >> (20-16+RAID6_TIME_JIFFIES_LG2));
-		raid6_call = *best;
-	} else
-		printk("raid6: Yikes!  No algorithm found!\n");
-
-	free_pages((unsigned long)syndromes, 1);
-
-	return best ? 0 : -EINVAL;
-}
-
-static void raid6_exit(void)
-{
-	do { } while (0);
-}
-
-subsys_initcall(raid6_select_algo);
-module_exit(raid6_exit);
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("RAID6 Q-syndrome calculations");
diff --git a/drivers/md/raid6altivec.uc b/drivers/md/raid6altivec.uc
deleted file mode 100644
index 2654d5c..0000000
--- a/drivers/md/raid6altivec.uc
+++ /dev/null
@@ -1,130 +0,0 @@
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- *   Copyright 2002-2004 H. Peter Anvin - All Rights Reserved
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation, Inc., 53 Temple Place Ste 330,
- *   Boston MA 02111-1307, USA; either version 2 of the License, or
- *   (at your option) any later version; incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * raid6altivec$#.c
- *
- * $#-way unrolled portable integer math RAID-6 instruction set
- *
- * This file is postprocessed using unroll.awk
- *
- * <benh> hpa: in process,
- * you can just "steal" the vec unit with enable_kernel_altivec() (but
- * bracked this with preempt_disable/enable or in a lock)
- */
-
-#include <linux/raid/pq.h>
-
-#ifdef CONFIG_ALTIVEC
-
-#include <altivec.h>
-#ifdef __KERNEL__
-# include <asm/system.h>
-# include <asm/cputable.h>
-#endif
-
-/*
- * This is the C data type to use.  We use a vector of
- * signed char so vec_cmpgt() will generate the right
- * instruction.
- */
-
-typedef vector signed char unative_t;
-
-#define NBYTES(x) ((vector signed char) {x,x,x,x, x,x,x,x, x,x,x,x, x,x,x,x})
-#define NSIZE	sizeof(unative_t)
-
-/*
- * The SHLBYTE() operation shifts each byte left by 1, *not*
- * rolling over into the next byte
- */
-static inline __attribute_const__ unative_t SHLBYTE(unative_t v)
-{
-	return vec_add(v,v);
-}
-
-/*
- * The MASK() operation returns 0xFF in any byte for which the high
- * bit is 1, 0x00 for any byte for which the high bit is 0.
- */
-static inline __attribute_const__ unative_t MASK(unative_t v)
-{
-	unative_t zv = NBYTES(0);
-
-	/* vec_cmpgt returns a vector bool char; thus the need for the cast */
-	return (unative_t)vec_cmpgt(zv, v);
-}
-
-
-/* This is noinline to make damned sure that gcc doesn't move any of the
-   Altivec code around the enable/disable code */
-static void noinline
-raid6_altivec$#_gen_syndrome_real(int disks, size_t bytes, void **ptrs)
-{
-	u8 **dptr = (u8 **)ptrs;
-	u8 *p, *q;
-	int d, z, z0;
-
-	unative_t wd$$, wq$$, wp$$, w1$$, w2$$;
-	unative_t x1d = NBYTES(0x1d);
-
-	z0 = disks - 3;		/* Highest data disk */
-	p = dptr[z0+1];		/* XOR parity */
-	q = dptr[z0+2];		/* RS syndrome */
-
-	for ( d = 0 ; d < bytes ; d += NSIZE*$# ) {
-		wq$$ = wp$$ = *(unative_t *)&dptr[z0][d+$$*NSIZE];
-		for ( z = z0-1 ; z >= 0 ; z-- ) {
-			wd$$ = *(unative_t *)&dptr[z][d+$$*NSIZE];
-			wp$$ = vec_xor(wp$$, wd$$);
-			w2$$ = MASK(wq$$);
-			w1$$ = SHLBYTE(wq$$);
-			w2$$ = vec_and(w2$$, x1d);
-			w1$$ = vec_xor(w1$$, w2$$);
-			wq$$ = vec_xor(w1$$, wd$$);
-		}
-		*(unative_t *)&p[d+NSIZE*$$] = wp$$;
-		*(unative_t *)&q[d+NSIZE*$$] = wq$$;
-	}
-}
-
-static void raid6_altivec$#_gen_syndrome(int disks, size_t bytes, void **ptrs)
-{
-	preempt_disable();
-	enable_kernel_altivec();
-
-	raid6_altivec$#_gen_syndrome_real(disks, bytes, ptrs);
-
-	preempt_enable();
-}
-
-int raid6_have_altivec(void);
-#if $# == 1
-int raid6_have_altivec(void)
-{
-	/* This assumes either all CPUs have Altivec or none does */
-# ifdef __KERNEL__
-	return cpu_has_feature(CPU_FTR_ALTIVEC);
-# else
-	return 1;
-# endif
-}
-#endif
-
-const struct raid6_calls raid6_altivec$# = {
-	raid6_altivec$#_gen_syndrome,
-	raid6_have_altivec,
-	"altivecx$#",
-	0
-};
-
-#endif /* CONFIG_ALTIVEC */
diff --git a/drivers/md/raid6int.uc b/drivers/md/raid6int.uc
deleted file mode 100644
index d1e276a..0000000
--- a/drivers/md/raid6int.uc
+++ /dev/null
@@ -1,117 +0,0 @@
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- *   Copyright 2002-2004 H. Peter Anvin - All Rights Reserved
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation, Inc., 53 Temple Place Ste 330,
- *   Boston MA 02111-1307, USA; either version 2 of the License, or
- *   (at your option) any later version; incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * raid6int$#.c
- *
- * $#-way unrolled portable integer math RAID-6 instruction set
- *
- * This file is postprocessed using unroll.awk
- */
-
-#include <linux/raid/pq.h>
-
-/*
- * This is the C data type to use
- */
-
-/* Change this from BITS_PER_LONG if there is something better... */
-#if BITS_PER_LONG == 64
-# define NBYTES(x) ((x) * 0x0101010101010101UL)
-# define NSIZE  8
-# define NSHIFT 3
-# define NSTRING "64"
-typedef u64 unative_t;
-#else
-# define NBYTES(x) ((x) * 0x01010101U)
-# define NSIZE  4
-# define NSHIFT 2
-# define NSTRING "32"
-typedef u32 unative_t;
-#endif
-
-
-
-/*
- * IA-64 wants insane amounts of unrolling.  On other architectures that
- * is just a waste of space.
- */
-#if ($# <= 8) || defined(__ia64__)
-
-
-/*
- * These sub-operations are separate inlines since they can sometimes be
- * specially optimized using architecture-specific hacks.
- */
-
-/*
- * The SHLBYTE() operation shifts each byte left by 1, *not*
- * rolling over into the next byte
- */
-static inline __attribute_const__ unative_t SHLBYTE(unative_t v)
-{
-	unative_t vv;
-
-	vv = (v << 1) & NBYTES(0xfe);
-	return vv;
-}
-
-/*
- * The MASK() operation returns 0xFF in any byte for which the high
- * bit is 1, 0x00 for any byte for which the high bit is 0.
- */
-static inline __attribute_const__ unative_t MASK(unative_t v)
-{
-	unative_t vv;
-
-	vv = v & NBYTES(0x80);
-	vv = (vv << 1) - (vv >> 7); /* Overflow on the top bit is OK */
-	return vv;
-}
-
-
-static void raid6_int$#_gen_syndrome(int disks, size_t bytes, void **ptrs)
-{
-	u8 **dptr = (u8 **)ptrs;
-	u8 *p, *q;
-	int d, z, z0;
-
-	unative_t wd$$, wq$$, wp$$, w1$$, w2$$;
-
-	z0 = disks - 3;		/* Highest data disk */
-	p = dptr[z0+1];		/* XOR parity */
-	q = dptr[z0+2];		/* RS syndrome */
-
-	for ( d = 0 ; d < bytes ; d += NSIZE*$# ) {
-		wq$$ = wp$$ = *(unative_t *)&dptr[z0][d+$$*NSIZE];
-		for ( z = z0-1 ; z >= 0 ; z-- ) {
-			wd$$ = *(unative_t *)&dptr[z][d+$$*NSIZE];
-			wp$$ ^= wd$$;
-			w2$$ = MASK(wq$$);
-			w1$$ = SHLBYTE(wq$$);
-			w2$$ &= NBYTES(0x1d);
-			w1$$ ^= w2$$;
-			wq$$ = w1$$ ^ wd$$;
-		}
-		*(unative_t *)&p[d+NSIZE*$$] = wp$$;
-		*(unative_t *)&q[d+NSIZE*$$] = wq$$;
-	}
-}
-
-const struct raid6_calls raid6_intx$# = {
-	raid6_int$#_gen_syndrome,
-	NULL,		/* always valid */
-	"int" NSTRING "x$#",
-	0
-};
-
-#endif
diff --git a/drivers/md/raid6mmx.c b/drivers/md/raid6mmx.c
deleted file mode 100644
index e7f6c13..0000000
--- a/drivers/md/raid6mmx.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- *   Copyright 2002 H. Peter Anvin - All Rights Reserved
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation, Inc., 53 Temple Place Ste 330,
- *   Boston MA 02111-1307, USA; either version 2 of the License, or
- *   (at your option) any later version; incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * raid6mmx.c
- *
- * MMX implementation of RAID-6 syndrome functions
- */
-
-#if defined(__i386__) && !defined(__arch_um__)
-
-#include <linux/raid/pq.h>
-#include "raid6x86.h"
-
-/* Shared with raid6sse1.c */
-const struct raid6_mmx_constants {
-	u64 x1d;
-} raid6_mmx_constants = {
-	0x1d1d1d1d1d1d1d1dULL,
-};
-
-static int raid6_have_mmx(void)
-{
-	/* Not really "boot_cpu" but "all_cpus" */
-	return boot_cpu_has(X86_FEATURE_MMX);
-}
-
-/*
- * Plain MMX implementation
- */
-static void raid6_mmx1_gen_syndrome(int disks, size_t bytes, void **ptrs)
-{
-	u8 **dptr = (u8 **)ptrs;
-	u8 *p, *q;
-	int d, z, z0;
-
-	z0 = disks - 3;		/* Highest data disk */
-	p = dptr[z0+1];		/* XOR parity */
-	q = dptr[z0+2];		/* RS syndrome */
-
-	kernel_fpu_begin();
-
-	asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d));
-	asm volatile("pxor %mm5,%mm5");	/* Zero temp */
-
-	for ( d = 0 ; d < bytes ; d += 8 ) {
-		asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */
-		asm volatile("movq %mm2,%mm4");	/* Q[0] */
-		for ( z = z0-1 ; z >= 0 ; z-- ) {
-			asm volatile("movq %0,%%mm6" : : "m" (dptr[z][d]));
-			asm volatile("pcmpgtb %mm4,%mm5");
-			asm volatile("paddb %mm4,%mm4");
-			asm volatile("pand %mm0,%mm5");
-			asm volatile("pxor %mm5,%mm4");
-			asm volatile("pxor %mm5,%mm5");
-			asm volatile("pxor %mm6,%mm2");
-			asm volatile("pxor %mm6,%mm4");
-		}
-		asm volatile("movq %%mm2,%0" : "=m" (p[d]));
-		asm volatile("pxor %mm2,%mm2");
-		asm volatile("movq %%mm4,%0" : "=m" (q[d]));
-		asm volatile("pxor %mm4,%mm4");
-	}
-
-	kernel_fpu_end();
-}
-
-const struct raid6_calls raid6_mmxx1 = {
-	raid6_mmx1_gen_syndrome,
-	raid6_have_mmx,
-	"mmxx1",
-	0
-};
-
-/*
- * Unrolled-by-2 MMX implementation
- */
-static void raid6_mmx2_gen_syndrome(int disks, size_t bytes, void **ptrs)
-{
-	u8 **dptr = (u8 **)ptrs;
-	u8 *p, *q;
-	int d, z, z0;
-
-	z0 = disks - 3;		/* Highest data disk */
-	p = dptr[z0+1];		/* XOR parity */
-	q = dptr[z0+2];		/* RS syndrome */
-
-	kernel_fpu_begin();
-
-	asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d));
-	asm volatile("pxor %mm5,%mm5");	/* Zero temp */
-	asm volatile("pxor %mm7,%mm7"); /* Zero temp */
-
-	for ( d = 0 ; d < bytes ; d += 16 ) {
-		asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */
-		asm volatile("movq %0,%%mm3" : : "m" (dptr[z0][d+8]));
-		asm volatile("movq %mm2,%mm4"); /* Q[0] */
-		asm volatile("movq %mm3,%mm6"); /* Q[1] */
-		for ( z = z0-1 ; z >= 0 ; z-- ) {
-			asm volatile("pcmpgtb %mm4,%mm5");
-			asm volatile("pcmpgtb %mm6,%mm7");
-			asm volatile("paddb %mm4,%mm4");
-			asm volatile("paddb %mm6,%mm6");
-			asm volatile("pand %mm0,%mm5");
-			asm volatile("pand %mm0,%mm7");
-			asm volatile("pxor %mm5,%mm4");
-			asm volatile("pxor %mm7,%mm6");
-			asm volatile("movq %0,%%mm5" : : "m" (dptr[z][d]));
-			asm volatile("movq %0,%%mm7" : : "m" (dptr[z][d+8]));
-			asm volatile("pxor %mm5,%mm2");
-			asm volatile("pxor %mm7,%mm3");
-			asm volatile("pxor %mm5,%mm4");
-			asm volatile("pxor %mm7,%mm6");
-			asm volatile("pxor %mm5,%mm5");
-			asm volatile("pxor %mm7,%mm7");
-		}
-		asm volatile("movq %%mm2,%0" : "=m" (p[d]));
-		asm volatile("movq %%mm3,%0" : "=m" (p[d+8]));
-		asm volatile("movq %%mm4,%0" : "=m" (q[d]));
-		asm volatile("movq %%mm6,%0" : "=m" (q[d+8]));
-	}
-
-	kernel_fpu_end();
-}
-
-const struct raid6_calls raid6_mmxx2 = {
-	raid6_mmx2_gen_syndrome,
-	raid6_have_mmx,
-	"mmxx2",
-	0
-};
-
-#endif
diff --git a/drivers/md/raid6recov.c b/drivers/md/raid6recov.c
deleted file mode 100644
index 2609f00..0000000
--- a/drivers/md/raid6recov.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- *   Copyright 2002 H. Peter Anvin - All Rights Reserved
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation, Inc., 53 Temple Place Ste 330,
- *   Boston MA 02111-1307, USA; either version 2 of the License, or
- *   (at your option) any later version; incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * raid6recov.c
- *
- * RAID-6 data recovery in dual failure mode.  In single failure mode,
- * use the RAID-5 algorithm (or, in the case of Q failure, just reconstruct
- * the syndrome.)
- */
-
-#include <linux/raid/pq.h>
-
-/* Recover two failed data blocks. */
-void raid6_2data_recov(int disks, size_t bytes, int faila, int failb,
-		       void **ptrs)
-{
-	u8 *p, *q, *dp, *dq;
-	u8 px, qx, db;
-	const u8 *pbmul;	/* P multiplier table for B data */
-	const u8 *qmul;		/* Q multiplier table (for both) */
-
-	p = (u8 *)ptrs[disks-2];
-	q = (u8 *)ptrs[disks-1];
-
-	/* Compute syndrome with zero for the missing data pages
-	   Use the dead data pages as temporary storage for
-	   delta p and delta q */
-	dp = (u8 *)ptrs[faila];
-	ptrs[faila] = (void *)raid6_empty_zero_page;
-	ptrs[disks-2] = dp;
-	dq = (u8 *)ptrs[failb];
-	ptrs[failb] = (void *)raid6_empty_zero_page;
-	ptrs[disks-1] = dq;
-
-	raid6_call.gen_syndrome(disks, bytes, ptrs);
-
-	/* Restore pointer table */
-	ptrs[faila]   = dp;
-	ptrs[failb]   = dq;
-	ptrs[disks-2] = p;
-	ptrs[disks-1] = q;
-
-	/* Now, pick the proper data tables */
-	pbmul = raid6_gfmul[raid6_gfexi[failb-faila]];
-	qmul  = raid6_gfmul[raid6_gfinv[raid6_gfexp[faila]^raid6_gfexp[failb]]];
-
-	/* Now do it... */
-	while ( bytes-- ) {
-		px    = *p ^ *dp;
-		qx    = qmul[*q ^ *dq];
-		*dq++ = db = pbmul[px] ^ qx; /* Reconstructed B */
-		*dp++ = db ^ px; /* Reconstructed A */
-		p++; q++;
-	}
-}
-EXPORT_SYMBOL_GPL(raid6_2data_recov);
-
-/* Recover failure of one data block plus the P block */
-void raid6_datap_recov(int disks, size_t bytes, int faila, void **ptrs)
-{
-	u8 *p, *q, *dq;
-	const u8 *qmul;		/* Q multiplier table */
-
-	p = (u8 *)ptrs[disks-2];
-	q = (u8 *)ptrs[disks-1];
-
-	/* Compute syndrome with zero for the missing data page
-	   Use the dead data page as temporary storage for delta q */
-	dq = (u8 *)ptrs[faila];
-	ptrs[faila] = (void *)raid6_empty_zero_page;
-	ptrs[disks-1] = dq;
-
-	raid6_call.gen_syndrome(disks, bytes, ptrs);
-
-	/* Restore pointer table */
-	ptrs[faila]   = dq;
-	ptrs[disks-1] = q;
-
-	/* Now, pick the proper data tables */
-	qmul  = raid6_gfmul[raid6_gfinv[raid6_gfexp[faila]]];
-
-	/* Now do it... */
-	while ( bytes-- ) {
-		*p++ ^= *dq = qmul[*q ^ *dq];
-		q++; dq++;
-	}
-}
-EXPORT_SYMBOL_GPL(raid6_datap_recov);
-
-#ifndef __KERNEL__
-/* Testing only */
-
-/* Recover two failed blocks. */
-void raid6_dual_recov(int disks, size_t bytes, int faila, int failb, void **ptrs)
-{
-	if ( faila > failb ) {
-		int tmp = faila;
-		faila = failb;
-		failb = tmp;
-	}
-
-	if ( failb == disks-1 ) {
-		if ( faila == disks-2 ) {
-			/* P+Q failure.  Just rebuild the syndrome. */
-			raid6_call.gen_syndrome(disks, bytes, ptrs);
-		} else {
-			/* data+Q failure.  Reconstruct data from P,
-			   then rebuild syndrome. */
-			/* NOT IMPLEMENTED - equivalent to RAID-5 */
-		}
-	} else {
-		if ( failb == disks-2 ) {
-			/* data+P failure. */
-			raid6_datap_recov(disks, bytes, faila, ptrs);
-		} else {
-			/* data+data failure. */
-			raid6_2data_recov(disks, bytes, faila, failb, ptrs);
-		}
-	}
-}
-
-#endif
diff --git a/drivers/md/raid6sse1.c b/drivers/md/raid6sse1.c
deleted file mode 100644
index b274dd5..0000000
--- a/drivers/md/raid6sse1.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- *   Copyright 2002 H. Peter Anvin - All Rights Reserved
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation, Inc., 53 Temple Place Ste 330,
- *   Boston MA 02111-1307, USA; either version 2 of the License, or
- *   (at your option) any later version; incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * raid6sse1.c
- *
- * SSE-1/MMXEXT implementation of RAID-6 syndrome functions
- *
- * This is really an MMX implementation, but it requires SSE-1 or
- * AMD MMXEXT for prefetch support and a few other features.  The
- * support for nontemporal memory accesses is enough to make this
- * worthwhile as a separate implementation.
- */
-
-#if defined(__i386__) && !defined(__arch_um__)
-
-#include <linux/raid/pq.h>
-#include "raid6x86.h"
-
-/* Defined in raid6mmx.c */
-extern const struct raid6_mmx_constants {
-	u64 x1d;
-} raid6_mmx_constants;
-
-static int raid6_have_sse1_or_mmxext(void)
-{
-	/* Not really boot_cpu but "all_cpus" */
-	return boot_cpu_has(X86_FEATURE_MMX) &&
-		(boot_cpu_has(X86_FEATURE_XMM) ||
-		 boot_cpu_has(X86_FEATURE_MMXEXT));
-}
-
-/*
- * Plain SSE1 implementation
- */
-static void raid6_sse11_gen_syndrome(int disks, size_t bytes, void **ptrs)
-{
-	u8 **dptr = (u8 **)ptrs;
-	u8 *p, *q;
-	int d, z, z0;
-
-	z0 = disks - 3;		/* Highest data disk */
-	p = dptr[z0+1];		/* XOR parity */
-	q = dptr[z0+2];		/* RS syndrome */
-
-	kernel_fpu_begin();
-
-	asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d));
-	asm volatile("pxor %mm5,%mm5");	/* Zero temp */
-
-	for ( d = 0 ; d < bytes ; d += 8 ) {
-		asm volatile("prefetchnta %0" : : "m" (dptr[z0][d]));
-		asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */
-		asm volatile("prefetchnta %0" : : "m" (dptr[z0-1][d]));
-		asm volatile("movq %mm2,%mm4");	/* Q[0] */
-		asm volatile("movq %0,%%mm6" : : "m" (dptr[z0-1][d]));
-		for ( z = z0-2 ; z >= 0 ; z-- ) {
-			asm volatile("prefetchnta %0" : : "m" (dptr[z][d]));
-			asm volatile("pcmpgtb %mm4,%mm5");
-			asm volatile("paddb %mm4,%mm4");
-			asm volatile("pand %mm0,%mm5");
-			asm volatile("pxor %mm5,%mm4");
-			asm volatile("pxor %mm5,%mm5");
-			asm volatile("pxor %mm6,%mm2");
-			asm volatile("pxor %mm6,%mm4");
-			asm volatile("movq %0,%%mm6" : : "m" (dptr[z][d]));
-		}
-		asm volatile("pcmpgtb %mm4,%mm5");
-		asm volatile("paddb %mm4,%mm4");
-		asm volatile("pand %mm0,%mm5");
-		asm volatile("pxor %mm5,%mm4");
-		asm volatile("pxor %mm5,%mm5");
-		asm volatile("pxor %mm6,%mm2");
-		asm volatile("pxor %mm6,%mm4");
-
-		asm volatile("movntq %%mm2,%0" : "=m" (p[d]));
-		asm volatile("movntq %%mm4,%0" : "=m" (q[d]));
-	}
-
-	asm volatile("sfence" : : : "memory");
-	kernel_fpu_end();
-}
-
-const struct raid6_calls raid6_sse1x1 = {
-	raid6_sse11_gen_syndrome,
-	raid6_have_sse1_or_mmxext,
-	"sse1x1",
-	1			/* Has cache hints */
-};
-
-/*
- * Unrolled-by-2 SSE1 implementation
- */
-static void raid6_sse12_gen_syndrome(int disks, size_t bytes, void **ptrs)
-{
-	u8 **dptr = (u8 **)ptrs;
-	u8 *p, *q;
-	int d, z, z0;
-
-	z0 = disks - 3;		/* Highest data disk */
-	p = dptr[z0+1];		/* XOR parity */
-	q = dptr[z0+2];		/* RS syndrome */
-
-	kernel_fpu_begin();
-
-	asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d));
-	asm volatile("pxor %mm5,%mm5");	/* Zero temp */
-	asm volatile("pxor %mm7,%mm7"); /* Zero temp */
-
-	/* We uniformly assume a single prefetch covers at least 16 bytes */
-	for ( d = 0 ; d < bytes ; d += 16 ) {
-		asm volatile("prefetchnta %0" : : "m" (dptr[z0][d]));
-		asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */
-		asm volatile("movq %0,%%mm3" : : "m" (dptr[z0][d+8])); /* P[1] */
-		asm volatile("movq %mm2,%mm4");	/* Q[0] */
-		asm volatile("movq %mm3,%mm6"); /* Q[1] */
-		for ( z = z0-1 ; z >= 0 ; z-- ) {
-			asm volatile("prefetchnta %0" : : "m" (dptr[z][d]));
-			asm volatile("pcmpgtb %mm4,%mm5");
-			asm volatile("pcmpgtb %mm6,%mm7");
-			asm volatile("paddb %mm4,%mm4");
-			asm volatile("paddb %mm6,%mm6");
-			asm volatile("pand %mm0,%mm5");
-			asm volatile("pand %mm0,%mm7");
-			asm volatile("pxor %mm5,%mm4");
-			asm volatile("pxor %mm7,%mm6");
-			asm volatile("movq %0,%%mm5" : : "m" (dptr[z][d]));
-			asm volatile("movq %0,%%mm7" : : "m" (dptr[z][d+8]));
-			asm volatile("pxor %mm5,%mm2");
-			asm volatile("pxor %mm7,%mm3");
-			asm volatile("pxor %mm5,%mm4");
-			asm volatile("pxor %mm7,%mm6");
-			asm volatile("pxor %mm5,%mm5");
-			asm volatile("pxor %mm7,%mm7");
-		}
-		asm volatile("movntq %%mm2,%0" : "=m" (p[d]));
-		asm volatile("movntq %%mm3,%0" : "=m" (p[d+8]));
-		asm volatile("movntq %%mm4,%0" : "=m" (q[d]));
-		asm volatile("movntq %%mm6,%0" : "=m" (q[d+8]));
-	}
-
-	asm volatile("sfence" : :: "memory");
-	kernel_fpu_end();
-}
-
-const struct raid6_calls raid6_sse1x2 = {
-	raid6_sse12_gen_syndrome,
-	raid6_have_sse1_or_mmxext,
-	"sse1x2",
-	1			/* Has cache hints */
-};
-
-#endif
diff --git a/drivers/md/raid6sse2.c b/drivers/md/raid6sse2.c
deleted file mode 100644
index 6ed6c6c..0000000
--- a/drivers/md/raid6sse2.c
+++ /dev/null
@@ -1,262 +0,0 @@
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- *   Copyright 2002 H. Peter Anvin - All Rights Reserved
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation, Inc., 53 Temple Place Ste 330,
- *   Boston MA 02111-1307, USA; either version 2 of the License, or
- *   (at your option) any later version; incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * raid6sse2.c
- *
- * SSE-2 implementation of RAID-6 syndrome functions
- *
- */
-
-#if (defined(__i386__) || defined(__x86_64__)) && !defined(__arch_um__)
-
-#include <linux/raid/pq.h>
-#include "raid6x86.h"
-
-static const struct raid6_sse_constants {
-	u64 x1d[2];
-} raid6_sse_constants  __attribute__((aligned(16))) = {
-	{ 0x1d1d1d1d1d1d1d1dULL, 0x1d1d1d1d1d1d1d1dULL },
-};
-
-static int raid6_have_sse2(void)
-{
-	/* Not really boot_cpu but "all_cpus" */
-	return boot_cpu_has(X86_FEATURE_MMX) &&
-		boot_cpu_has(X86_FEATURE_FXSR) &&
-		boot_cpu_has(X86_FEATURE_XMM) &&
-		boot_cpu_has(X86_FEATURE_XMM2);
-}
-
-/*
- * Plain SSE2 implementation
- */
-static void raid6_sse21_gen_syndrome(int disks, size_t bytes, void **ptrs)
-{
-	u8 **dptr = (u8 **)ptrs;
-	u8 *p, *q;
-	int d, z, z0;
-
-	z0 = disks - 3;		/* Highest data disk */
-	p = dptr[z0+1];		/* XOR parity */
-	q = dptr[z0+2];		/* RS syndrome */
-
-	kernel_fpu_begin();
-
-	asm volatile("movdqa %0,%%xmm0" : : "m" (raid6_sse_constants.x1d[0]));
-	asm volatile("pxor %xmm5,%xmm5");	/* Zero temp */
-
-	for ( d = 0 ; d < bytes ; d += 16 ) {
-		asm volatile("prefetchnta %0" : : "m" (dptr[z0][d]));
-		asm volatile("movdqa %0,%%xmm2" : : "m" (dptr[z0][d])); /* P[0] */
-		asm volatile("prefetchnta %0" : : "m" (dptr[z0-1][d]));
-		asm volatile("movdqa %xmm2,%xmm4"); /* Q[0] */
-		asm volatile("movdqa %0,%%xmm6" : : "m" (dptr[z0-1][d]));
-		for ( z = z0-2 ; z >= 0 ; z-- ) {
-			asm volatile("prefetchnta %0" : : "m" (dptr[z][d]));
-			asm volatile("pcmpgtb %xmm4,%xmm5");
-			asm volatile("paddb %xmm4,%xmm4");
-			asm volatile("pand %xmm0,%xmm5");
-			asm volatile("pxor %xmm5,%xmm4");
-			asm volatile("pxor %xmm5,%xmm5");
-			asm volatile("pxor %xmm6,%xmm2");
-			asm volatile("pxor %xmm6,%xmm4");
-			asm volatile("movdqa %0,%%xmm6" : : "m" (dptr[z][d]));
-		}
-		asm volatile("pcmpgtb %xmm4,%xmm5");
-		asm volatile("paddb %xmm4,%xmm4");
-		asm volatile("pand %xmm0,%xmm5");
-		asm volatile("pxor %xmm5,%xmm4");
-		asm volatile("pxor %xmm5,%xmm5");
-		asm volatile("pxor %xmm6,%xmm2");
-		asm volatile("pxor %xmm6,%xmm4");
-
-		asm volatile("movntdq %%xmm2,%0" : "=m" (p[d]));
-		asm volatile("pxor %xmm2,%xmm2");
-		asm volatile("movntdq %%xmm4,%0" : "=m" (q[d]));
-		asm volatile("pxor %xmm4,%xmm4");
-	}
-
-	asm volatile("sfence" : : : "memory");
-	kernel_fpu_end();
-}
-
-const struct raid6_calls raid6_sse2x1 = {
-	raid6_sse21_gen_syndrome,
-	raid6_have_sse2,
-	"sse2x1",
-	1			/* Has cache hints */
-};
-
-/*
- * Unrolled-by-2 SSE2 implementation
- */
-static void raid6_sse22_gen_syndrome(int disks, size_t bytes, void **ptrs)
-{
-	u8 **dptr = (u8 **)ptrs;
-	u8 *p, *q;
-	int d, z, z0;
-
-	z0 = disks - 3;		/* Highest data disk */
-	p = dptr[z0+1];		/* XOR parity */
-	q = dptr[z0+2];		/* RS syndrome */
-
-	kernel_fpu_begin();
-
-	asm volatile("movdqa %0,%%xmm0" : : "m" (raid6_sse_constants.x1d[0]));
-	asm volatile("pxor %xmm5,%xmm5"); /* Zero temp */
-	asm volatile("pxor %xmm7,%xmm7"); /* Zero temp */
-
-	/* We uniformly assume a single prefetch covers at least 32 bytes */
-	for ( d = 0 ; d < bytes ; d += 32 ) {
-		asm volatile("prefetchnta %0" : : "m" (dptr[z0][d]));
-		asm volatile("movdqa %0,%%xmm2" : : "m" (dptr[z0][d]));    /* P[0] */
-		asm volatile("movdqa %0,%%xmm3" : : "m" (dptr[z0][d+16])); /* P[1] */
-		asm volatile("movdqa %xmm2,%xmm4"); /* Q[0] */
-		asm volatile("movdqa %xmm3,%xmm6"); /* Q[1] */
-		for ( z = z0-1 ; z >= 0 ; z-- ) {
-			asm volatile("prefetchnta %0" : : "m" (dptr[z][d]));
-			asm volatile("pcmpgtb %xmm4,%xmm5");
-			asm volatile("pcmpgtb %xmm6,%xmm7");
-			asm volatile("paddb %xmm4,%xmm4");
-			asm volatile("paddb %xmm6,%xmm6");
-			asm volatile("pand %xmm0,%xmm5");
-			asm volatile("pand %xmm0,%xmm7");
-			asm volatile("pxor %xmm5,%xmm4");
-			asm volatile("pxor %xmm7,%xmm6");
-			asm volatile("movdqa %0,%%xmm5" : : "m" (dptr[z][d]));
-			asm volatile("movdqa %0,%%xmm7" : : "m" (dptr[z][d+16]));
-			asm volatile("pxor %xmm5,%xmm2");
-			asm volatile("pxor %xmm7,%xmm3");
-			asm volatile("pxor %xmm5,%xmm4");
-			asm volatile("pxor %xmm7,%xmm6");
-			asm volatile("pxor %xmm5,%xmm5");
-			asm volatile("pxor %xmm7,%xmm7");
-		}
-		asm volatile("movntdq %%xmm2,%0" : "=m" (p[d]));
-		asm volatile("movntdq %%xmm3,%0" : "=m" (p[d+16]));
-		asm volatile("movntdq %%xmm4,%0" : "=m" (q[d]));
-		asm volatile("movntdq %%xmm6,%0" : "=m" (q[d+16]));
-	}
-
-	asm volatile("sfence" : : : "memory");
-	kernel_fpu_end();
-}
-
-const struct raid6_calls raid6_sse2x2 = {
-	raid6_sse22_gen_syndrome,
-	raid6_have_sse2,
-	"sse2x2",
-	1			/* Has cache hints */
-};
-
-#endif
-
-#if defined(__x86_64__) && !defined(__arch_um__)
-
-/*
- * Unrolled-by-4 SSE2 implementation
- */
-static void raid6_sse24_gen_syndrome(int disks, size_t bytes, void **ptrs)
-{
-	u8 **dptr = (u8 **)ptrs;
-	u8 *p, *q;
-	int d, z, z0;
-
-	z0 = disks - 3;		/* Highest data disk */
-	p = dptr[z0+1];		/* XOR parity */
-	q = dptr[z0+2];		/* RS syndrome */
-
-	kernel_fpu_begin();
-
-	asm volatile("movdqa %0,%%xmm0" :: "m" (raid6_sse_constants.x1d[0]));
-	asm volatile("pxor %xmm2,%xmm2");	/* P[0] */
-	asm volatile("pxor %xmm3,%xmm3");	/* P[1] */
-	asm volatile("pxor %xmm4,%xmm4"); 	/* Q[0] */
-	asm volatile("pxor %xmm5,%xmm5");	/* Zero temp */
-	asm volatile("pxor %xmm6,%xmm6"); 	/* Q[1] */
-	asm volatile("pxor %xmm7,%xmm7"); 	/* Zero temp */
-	asm volatile("pxor %xmm10,%xmm10");	/* P[2] */
-	asm volatile("pxor %xmm11,%xmm11");	/* P[3] */
-	asm volatile("pxor %xmm12,%xmm12"); 	/* Q[2] */
-	asm volatile("pxor %xmm13,%xmm13");	/* Zero temp */
-	asm volatile("pxor %xmm14,%xmm14"); 	/* Q[3] */
-	asm volatile("pxor %xmm15,%xmm15"); 	/* Zero temp */
-
-	for ( d = 0 ; d < bytes ; d += 64 ) {
-		for ( z = z0 ; z >= 0 ; z-- ) {
-			/* The second prefetch seems to improve performance... */
-			asm volatile("prefetchnta %0" :: "m" (dptr[z][d]));
-			asm volatile("prefetchnta %0" :: "m" (dptr[z][d+32]));
-			asm volatile("pcmpgtb %xmm4,%xmm5");
-			asm volatile("pcmpgtb %xmm6,%xmm7");
-			asm volatile("pcmpgtb %xmm12,%xmm13");
-			asm volatile("pcmpgtb %xmm14,%xmm15");
-			asm volatile("paddb %xmm4,%xmm4");
-			asm volatile("paddb %xmm6,%xmm6");
-			asm volatile("paddb %xmm12,%xmm12");
-			asm volatile("paddb %xmm14,%xmm14");
-			asm volatile("pand %xmm0,%xmm5");
-			asm volatile("pand %xmm0,%xmm7");
-			asm volatile("pand %xmm0,%xmm13");
-			asm volatile("pand %xmm0,%xmm15");
-			asm volatile("pxor %xmm5,%xmm4");
-			asm volatile("pxor %xmm7,%xmm6");
-			asm volatile("pxor %xmm13,%xmm12");
-			asm volatile("pxor %xmm15,%xmm14");
-			asm volatile("movdqa %0,%%xmm5" :: "m" (dptr[z][d]));
-			asm volatile("movdqa %0,%%xmm7" :: "m" (dptr[z][d+16]));
-			asm volatile("movdqa %0,%%xmm13" :: "m" (dptr[z][d+32]));
-			asm volatile("movdqa %0,%%xmm15" :: "m" (dptr[z][d+48]));
-			asm volatile("pxor %xmm5,%xmm2");
-			asm volatile("pxor %xmm7,%xmm3");
-			asm volatile("pxor %xmm13,%xmm10");
-			asm volatile("pxor %xmm15,%xmm11");
-			asm volatile("pxor %xmm5,%xmm4");
-			asm volatile("pxor %xmm7,%xmm6");
-			asm volatile("pxor %xmm13,%xmm12");
-			asm volatile("pxor %xmm15,%xmm14");
-			asm volatile("pxor %xmm5,%xmm5");
-			asm volatile("pxor %xmm7,%xmm7");
-			asm volatile("pxor %xmm13,%xmm13");
-			asm volatile("pxor %xmm15,%xmm15");
-		}
-		asm volatile("movntdq %%xmm2,%0" : "=m" (p[d]));
-		asm volatile("pxor %xmm2,%xmm2");
-		asm volatile("movntdq %%xmm3,%0" : "=m" (p[d+16]));
-		asm volatile("pxor %xmm3,%xmm3");
-		asm volatile("movntdq %%xmm10,%0" : "=m" (p[d+32]));
-		asm volatile("pxor %xmm10,%xmm10");
-		asm volatile("movntdq %%xmm11,%0" : "=m" (p[d+48]));
-		asm volatile("pxor %xmm11,%xmm11");
-		asm volatile("movntdq %%xmm4,%0" : "=m" (q[d]));
-		asm volatile("pxor %xmm4,%xmm4");
-		asm volatile("movntdq %%xmm6,%0" : "=m" (q[d+16]));
-		asm volatile("pxor %xmm6,%xmm6");
-		asm volatile("movntdq %%xmm12,%0" : "=m" (q[d+32]));
-		asm volatile("pxor %xmm12,%xmm12");
-		asm volatile("movntdq %%xmm14,%0" : "=m" (q[d+48]));
-		asm volatile("pxor %xmm14,%xmm14");
-	}
-
-	asm volatile("sfence" : : : "memory");
-	kernel_fpu_end();
-}
-
-const struct raid6_calls raid6_sse2x4 = {
-	raid6_sse24_gen_syndrome,
-	raid6_have_sse2,
-	"sse2x4",
-	1			/* Has cache hints */
-};
-
-#endif
diff --git a/drivers/md/raid6test/Makefile b/drivers/md/raid6test/Makefile
deleted file mode 100644
index 2874cbe..0000000
--- a/drivers/md/raid6test/Makefile
+++ /dev/null
@@ -1,75 +0,0 @@
-#
-# This is a simple Makefile to test some of the RAID-6 code
-# from userspace.
-#
-
-CC	 = gcc
-OPTFLAGS = -O2			# Adjust as desired
-CFLAGS	 = -I.. -I ../../../include -g $(OPTFLAGS)
-LD	 = ld
-AWK	 = awk
-AR	 = ar
-RANLIB	 = ranlib
-
-.c.o:
-	$(CC) $(CFLAGS) -c -o $@ $<
-
-%.c: ../%.c
-	cp -f $< $@
-
-%.uc: ../%.uc
-	cp -f $< $@
-
-all:	raid6.a raid6test
-
-raid6.a: raid6int1.o raid6int2.o raid6int4.o raid6int8.o raid6int16.o \
-	 raid6int32.o \
-	 raid6mmx.o raid6sse1.o raid6sse2.o \
-	 raid6altivec1.o raid6altivec2.o raid6altivec4.o raid6altivec8.o \
-	 raid6recov.o raid6algos.o \
-	 raid6tables.o
-	 rm -f $@
-	 $(AR) cq $@ $^
-	 $(RANLIB) $@
-
-raid6test: test.c raid6.a
-	$(CC) $(CFLAGS) -o raid6test $^
-
-raid6altivec1.c: raid6altivec.uc ../unroll.awk
-	$(AWK) ../unroll.awk -vN=1 < raid6altivec.uc > $@
-
-raid6altivec2.c: raid6altivec.uc ../unroll.awk
-	$(AWK) ../unroll.awk -vN=2 < raid6altivec.uc > $@
-
-raid6altivec4.c: raid6altivec.uc ../unroll.awk
-	$(AWK) ../unroll.awk -vN=4 < raid6altivec.uc > $@
-
-raid6altivec8.c: raid6altivec.uc ../unroll.awk
-	$(AWK) ../unroll.awk -vN=8 < raid6altivec.uc > $@
-
-raid6int1.c: raid6int.uc ../unroll.awk
-	$(AWK) ../unroll.awk -vN=1 < raid6int.uc > $@
-
-raid6int2.c: raid6int.uc ../unroll.awk
-	$(AWK) ../unroll.awk -vN=2 < raid6int.uc > $@
-
-raid6int4.c: raid6int.uc ../unroll.awk
-	$(AWK) ../unroll.awk -vN=4 < raid6int.uc > $@
-
-raid6int8.c: raid6int.uc ../unroll.awk
-	$(AWK) ../unroll.awk -vN=8 < raid6int.uc > $@
-
-raid6int16.c: raid6int.uc ../unroll.awk
-	$(AWK) ../unroll.awk -vN=16 < raid6int.uc > $@
-
-raid6int32.c: raid6int.uc ../unroll.awk
-	$(AWK) ../unroll.awk -vN=32 < raid6int.uc > $@
-
-raid6tables.c: mktables
-	./mktables > raid6tables.c
-
-clean:
-	rm -f *.o *.a mktables mktables.c raid6int.uc raid6*.c raid6test
-
-spotless: clean
-	rm -f *~
diff --git a/drivers/md/raid6test/test.c b/drivers/md/raid6test/test.c
deleted file mode 100644
index 7a93031..0000000
--- a/drivers/md/raid6test/test.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- *   Copyright 2002-2007 H. Peter Anvin - All Rights Reserved
- *
- *   This file is part of the Linux kernel, and is made available under
- *   the terms of the GNU General Public License version 2 or (at your
- *   option) any later version; incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * raid6test.c
- *
- * Test RAID-6 recovery with various algorithms
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <linux/raid/pq.h>
-
-#define NDISKS		16	/* Including P and Q */
-
-const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256)));
-struct raid6_calls raid6_call;
-
-char *dataptrs[NDISKS];
-char data[NDISKS][PAGE_SIZE];
-char recovi[PAGE_SIZE], recovj[PAGE_SIZE];
-
-static void makedata(void)
-{
-	int i, j;
-
-	for (i = 0; i < NDISKS; i++) {
-		for (j = 0; j < PAGE_SIZE; j++)
-			data[i][j] = rand();
-
-		dataptrs[i] = data[i];
-	}
-}
-
-static char disk_type(int d)
-{
-	switch (d) {
-	case NDISKS-2:
-		return 'P';
-	case NDISKS-1:
-		return 'Q';
-	default:
-		return 'D';
-	}
-}
-
-static int test_disks(int i, int j)
-{
-	int erra, errb;
-
-	memset(recovi, 0xf0, PAGE_SIZE);
-	memset(recovj, 0xba, PAGE_SIZE);
-
-	dataptrs[i] = recovi;
-	dataptrs[j] = recovj;
-
-	raid6_dual_recov(NDISKS, PAGE_SIZE, i, j, (void **)&dataptrs);
-
-	erra = memcmp(data[i], recovi, PAGE_SIZE);
-	errb = memcmp(data[j], recovj, PAGE_SIZE);
-
-	if (i < NDISKS-2 && j == NDISKS-1) {
-		/* We don't implement the DQ failure scenario, since it's
-		   equivalent to a RAID-5 failure (XOR, then recompute Q) */
-		erra = errb = 0;
-	} else {
-		printf("algo=%-8s  faila=%3d(%c)  failb=%3d(%c)  %s\n",
-		       raid6_call.name,
-		       i, disk_type(i),
-		       j, disk_type(j),
-		       (!erra && !errb) ? "OK" :
-		       !erra ? "ERRB" :
-		       !errb ? "ERRA" : "ERRAB");
-	}
-
-	dataptrs[i] = data[i];
-	dataptrs[j] = data[j];
-
-	return erra || errb;
-}
-
-int main(int argc, char *argv[])
-{
-	const struct raid6_calls *const *algo;
-	int i, j;
-	int err = 0;
-
-	makedata();
-
-	for (algo = raid6_algos; *algo; algo++) {
-		if (!(*algo)->valid || (*algo)->valid()) {
-			raid6_call = **algo;
-
-			/* Nuke syndromes */
-			memset(data[NDISKS-2], 0xee, 2*PAGE_SIZE);
-
-			/* Generate assumed good syndrome */
-			raid6_call.gen_syndrome(NDISKS, PAGE_SIZE,
-						(void **)&dataptrs);
-
-			for (i = 0; i < NDISKS-1; i++)
-				for (j = i+1; j < NDISKS; j++)
-					err += test_disks(i, j);
-		}
-		printf("\n");
-	}
-
-	printf("\n");
-	/* Pick the best algorithm test */
-	raid6_select_algo();
-
-	if (err)
-		printf("\n*** ERRORS FOUND ***\n");
-
-	return err;
-}
diff --git a/drivers/md/raid6x86.h b/drivers/md/raid6x86.h
deleted file mode 100644
index 4c22c15..0000000
--- a/drivers/md/raid6x86.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/* ----------------------------------------------------------------------- *
- *
- *   Copyright 2002-2004 H. Peter Anvin - All Rights Reserved
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation, Inc., 53 Temple Place Ste 330,
- *   Boston MA 02111-1307, USA; either version 2 of the License, or
- *   (at your option) any later version; incorporated herein by reference.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * raid6x86.h
- *
- * Definitions common to x86 and x86-64 RAID-6 code only
- */
-
-#ifndef LINUX_RAID_RAID6X86_H
-#define LINUX_RAID_RAID6X86_H
-
-#if (defined(__i386__) || defined(__x86_64__)) && !defined(__arch_um__)
-
-#ifdef __KERNEL__ /* Real code */
-
-#include <asm/i387.h>
-
-#else /* Dummy code for user space testing */
-
-static inline void kernel_fpu_begin(void)
-{
-}
-
-static inline void kernel_fpu_end(void)
-{
-}
-
-#define X86_FEATURE_MMX		(0*32+23) /* Multimedia Extensions */
-#define X86_FEATURE_FXSR	(0*32+24) /* FXSAVE and FXRSTOR instructions
-					   * (fast save and restore) */
-#define X86_FEATURE_XMM		(0*32+25) /* Streaming SIMD Extensions */
-#define X86_FEATURE_XMM2	(0*32+26) /* Streaming SIMD Extensions-2 */
-#define X86_FEATURE_MMXEXT	(1*32+22) /* AMD MMX extensions */
-
-/* Should work well enough on modern CPUs for testing */
-static inline int boot_cpu_has(int flag)
-{
-	u32 eax = (flag >> 5) ? 0x80000001 : 1;
-	u32 edx;
-
-	asm volatile("cpuid"
-		     : "+a" (eax), "=d" (edx)
-		     : : "ecx", "ebx");
-
-	return (edx >> (flag & 31)) & 1;
-}
-
-#endif /* ndef __KERNEL__ */
-
-#endif
-#endif
diff --git a/drivers/md/unroll.awk b/drivers/md/unroll.awk
deleted file mode 100644
index c6aa036..0000000
--- a/drivers/md/unroll.awk
+++ /dev/null
@@ -1,20 +0,0 @@
-
-# This filter requires one command line option of form -vN=n
-# where n must be a decimal number.
-#
-# Repeat each input line containing $$ n times, replacing $$ with 0...n-1.
-# Replace each $# with n, and each $* with a single $.
-
-BEGIN {
-	n = N + 0
-}
-{
-	if (/\$\$/) { rep = n } else { rep = 1 }
-	for (i = 0; i < rep; ++i) {
-		tmp = $0
-		gsub(/\$\$/, i, tmp)
-		gsub(/\$\#/, n, tmp)
-		gsub(/\$\*/, "$", tmp)
-		print tmp
-	}
-}