summaryrefslogtreecommitdiffstats
path: root/drivers/md
diff options
context:
space:
mode:
authorNeilBrown <neilb@suse.de>2006-10-03 01:15:54 -0700
committerLinus Torvalds <torvalds@g5.osdl.org>2006-10-03 08:04:18 -0700
commit0d12922823408b26f83b15cae4a4feff4bd22f28 (patch)
treea3509f442e6fc75ca9304757ffa3dce4918ef55e /drivers/md
parent26be34dc3a46be983352dd89683db374b0cb73fa (diff)
downloadop-kernel-dev-0d12922823408b26f83b15cae4a4feff4bd22f28.zip
op-kernel-dev-0d12922823408b26f83b15cae4a4feff4bd22f28.tar.gz
[PATCH] md: define ->congested_fn for raid1, raid10, and multipath
raid1, raid10 and multipath don't report their 'congested' status through bdi_*_congested, but should. This patch adds the appropriate functions which just check the 'congested' status of all active members (with appropriate locking). raid1 read_balance should be modified to prefer devices where bdi_read_congested returns false. Then we could use the '&' branch rather than the '|' branch. However that should would need some benchmarking first to make sure it is actually a good idea. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/md')
-rw-r--r--drivers/md/multipath.c24
-rw-r--r--drivers/md/raid1.c28
-rw-r--r--drivers/md/raid10.c22
3 files changed, 74 insertions, 0 deletions
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index e4f168d..171ff41 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -228,6 +228,28 @@ static int multipath_issue_flush(request_queue_t *q, struct gendisk *disk,
rcu_read_unlock();
return ret;
}
+static int multipath_congested(void *data, int bits)
+{
+ mddev_t *mddev = data;
+ multipath_conf_t *conf = mddev_to_conf(mddev);
+ int i, ret = 0;
+
+ rcu_read_lock();
+ for (i = 0; i < mddev->raid_disks ; i++) {
+ mdk_rdev_t *rdev = rcu_dereference(conf->multipaths[i].rdev);
+ if (rdev && !test_bit(Faulty, &rdev->flags)) {
+ request_queue_t *q = bdev_get_queue(rdev->bdev);
+
+ ret |= bdi_congested(&q->backing_dev_info, bits);
+ /* Just like multipath_map, we just check the
+ * first available device
+ */
+ break;
+ }
+ }
+ rcu_read_unlock();
+ return ret;
+}
/*
* Careful, this can execute in IRQ contexts as well!
@@ -509,6 +531,8 @@ static int multipath_run (mddev_t *mddev)
mddev->queue->unplug_fn = multipath_unplug;
mddev->queue->issue_flush_fn = multipath_issue_flush;
+ mddev->queue->backing_dev_info.congested_fn = multipath_congested;
+ mddev->queue->backing_dev_info.congested_data = mddev;
return 0;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 99c4e03..dc9d2de 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -601,6 +601,32 @@ static int raid1_issue_flush(request_queue_t *q, struct gendisk *disk,
return ret;
}
+static int raid1_congested(void *data, int bits)
+{
+ mddev_t *mddev = data;
+ conf_t *conf = mddev_to_conf(mddev);
+ int i, ret = 0;
+
+ rcu_read_lock();
+ for (i = 0; i < mddev->raid_disks; i++) {
+ mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
+ if (rdev && !test_bit(Faulty, &rdev->flags)) {
+ request_queue_t *q = bdev_get_queue(rdev->bdev);
+
+ /* Note the '|| 1' - when read_balance prefers
+ * non-congested targets, it can be removed
+ */
+ if ((bits & (1<<BDI_write_congested)) || 1)
+ ret |= bdi_congested(&q->backing_dev_info, bits);
+ else
+ ret &= bdi_congested(&q->backing_dev_info, bits);
+ }
+ }
+ rcu_read_unlock();
+ return ret;
+}
+
+
/* Barriers....
* Sometimes we need to suspend IO while we do something else,
* either some resync/recovery, or reconfigure the array.
@@ -1965,6 +1991,8 @@ static int run(mddev_t *mddev)
mddev->queue->unplug_fn = raid1_unplug;
mddev->queue->issue_flush_fn = raid1_issue_flush;
+ mddev->queue->backing_dev_info.congested_fn = raid1_congested;
+ mddev->queue->backing_dev_info.congested_data = mddev;
return 0;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 64f8016..1250f0e 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -648,6 +648,26 @@ static int raid10_issue_flush(request_queue_t *q, struct gendisk *disk,
return ret;
}
+static int raid10_congested(void *data, int bits)
+{
+ mddev_t *mddev = data;
+ conf_t *conf = mddev_to_conf(mddev);
+ int i, ret = 0;
+
+ rcu_read_lock();
+ for (i = 0; i < mddev->raid_disks && ret == 0; i++) {
+ mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
+ if (rdev && !test_bit(Faulty, &rdev->flags)) {
+ request_queue_t *q = bdev_get_queue(rdev->bdev);
+
+ ret |= bdi_congested(&q->backing_dev_info, bits);
+ }
+ }
+ rcu_read_unlock();
+ return ret;
+}
+
+
/* Barriers....
* Sometimes we need to suspend IO while we do something else,
* either some resync/recovery, or reconfigure the array.
@@ -2094,6 +2114,8 @@ static int run(mddev_t *mddev)
mddev->queue->unplug_fn = raid10_unplug;
mddev->queue->issue_flush_fn = raid10_issue_flush;
+ mddev->queue->backing_dev_info.congested_fn = raid10_congested;
+ mddev->queue->backing_dev_info.congested_data = mddev;
/* Calculate max read-ahead size.
* We need to readahead at least twice a whole stripe....
OpenPOWER on IntegriCloud