md: always set MD_RECOVERY_INTR when interrupting a reshape thread.

Commit 8313b8e57f55b15e5b7f7fc5d1630bbf686a9a97
   md: fix problem when adding device to read-only array with bitmap.

added a called to md_reap_sync_thread() which cause a reshape thread
to be interrupted (in particular, it could cause md_thread() to never even
call md_do_sync()).
However it didn't set MD_RECOVERY_INTR so ->finish_reshape() would not
know that the reshape didn't complete.

This only happens when mddev->ro is set and normally reshape threads
don't run in that situation.  But raid5 and raid10 can start a reshape
thread during "run" is the array is in the middle of a reshape.
They do this even if ->ro is set.

So it is best to set MD_RECOVERY_INTR before abortingg the
sync thread, just in case.

Though it rare for this to trigger a problem it can cause data corruption
because the reshape isn't finished properly.
So it is suitable for any stable which the offending commit was applied to.
(3.2 or later)

Fixes: 8313b8e57f55b15e5b7f7fc5d1630bbf686a9a97
Cc: stable@vger.kernel.org (3.2+)
Signed-off-by: NeilBrown <neilb@suse.de>

1 files changed, 1 insertions, 0 deletions

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 48a99b7..2382cfc 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7826,6 +7826,7 @@ void md_check_recovery(struct mddev *mddev)
 			/* There is no thread, but we need to call
 			 * ->spare_active and clear saved_raid_disk
 			 */
+			set_bit(MD_RECOVERY_INTR, &mddev->recovery);
 			md_reap_sync_thread(mddev);
 			clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
 			goto unlock;