Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (151 commits)
  powerpc: Fix usage of 64-bit instruction in 32-bit altivec code
  MAINTAINERS: Add PowerPC patterns
  powerpc/pseries: Track previous CPPR values to correctly EOI interrupts
  powerpc/pseries: Correct pseries/dlpar.c build break without CONFIG_SMP
  powerpc: Make "intspec" pointers in irq_host->xlate() const
  powerpc/8xx: DTLB Miss cleanup
  powerpc/8xx: Remove DIRTY pte handling in DTLB Error.
  powerpc/8xx: Start using dcbX instructions in various copy routines
  powerpc/8xx: Restore _PAGE_WRITETHRU
  powerpc/8xx: Add missing Guarded setting in DTLB Error.
  powerpc/8xx: Fixup DAR from buggy dcbX instructions.
  powerpc/8xx: Tag DAR with 0x00f0 to catch buggy instructions.
  powerpc/8xx: Update TLB asm so it behaves as linux mm expects.
  powerpc/8xx: Invalidate non present TLBs
  powerpc/pseries: Serialize cpu hotplug operations during deactivate Vs deallocate
  pseries/pseries: Add code to online/offline CPUs of a DLPAR node
  powerpc: stop_this_cpu: remove the cpu from the online map.
  powerpc/pseries: Add kernel based CPU DLPAR handling
  sysfs/cpu: Add probe/release files
  powerpc/pseries: Kernel DLPAR Infrastructure
  ...

6 files changed, 282 insertions, 286 deletions

diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c
index 588a5b0..26a303a 100644
--- a/drivers/macintosh/macio_asic.c
+++ b/drivers/macintosh/macio_asic.c
@@ -379,6 +379,11 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip,
 	dev->ofdev.dev.parent = parent;
 	dev->ofdev.dev.bus = &macio_bus_type;
 	dev->ofdev.dev.release = macio_release_dev;
+	dev->ofdev.dev.dma_parms = &dev->dma_parms;
+
+	/* Standard DMA paremeters */
+	dma_set_max_seg_size(&dev->ofdev.dev, 65536);
+	dma_set_seg_boundary(&dev->ofdev.dev, 0xffffffff);
 
 #ifdef CONFIG_PCI
 	/* Set the DMA ops to the ones from the PCI device, this could be
@@ -538,6 +543,42 @@ void macio_unregister_driver(struct macio_driver *drv)
 	driver_unregister(&drv->driver);
 }
 
+/* Managed MacIO resources */
+struct macio_devres {
+	u32	res_mask;
+};
+
+static void maciom_release(struct device *gendev, void *res)
+{
+	struct macio_dev *dev = to_macio_device(gendev);
+	struct macio_devres *dr = res;
+	int i, max;
+
+	max = min(dev->n_resources, 32);
+	for (i = 0; i < max; i++) {
+		if (dr->res_mask & (1 << i))
+			macio_release_resource(dev, i);
+	}
+}
+
+int macio_enable_devres(struct macio_dev *dev)
+{
+	struct macio_devres *dr;
+
+	dr = devres_find(&dev->ofdev.dev, maciom_release, NULL, NULL);
+	if (!dr) {
+		dr = devres_alloc(maciom_release, sizeof(*dr), GFP_KERNEL);
+		if (!dr)
+			return -ENOMEM;
+	}
+	return devres_get(&dev->ofdev.dev, dr, NULL, NULL) != NULL;
+}
+
+static struct macio_devres * find_macio_dr(struct macio_dev *dev)
+{
+	return devres_find(&dev->ofdev.dev, maciom_release, NULL, NULL);
+}
+
 /**
  *	macio_request_resource - Request an MMIO resource
  * 	@dev: pointer to the device holding the resource
@@ -555,6 +596,8 @@ void macio_unregister_driver(struct macio_driver *drv)
 int macio_request_resource(struct macio_dev *dev, int resource_no,
 			   const char *name)
 {
+	struct macio_devres *dr = find_macio_dr(dev);
+
 	if (macio_resource_len(dev, resource_no) == 0)
 		return 0;
 		
@@ -562,6 +605,9 @@ int macio_request_resource(struct macio_dev *dev, int resource_no,
 				macio_resource_len(dev, resource_no),
 				name))
 		goto err_out;
+
+	if (dr && resource_no < 32)
+		dr->res_mask |= 1 << resource_no;
 	
 	return 0;
 
@@ -582,10 +628,14 @@ err_out:
  */
 void macio_release_resource(struct macio_dev *dev, int resource_no)
 {
+	struct macio_devres *dr = find_macio_dr(dev);
+
 	if (macio_resource_len(dev, resource_no) == 0)
 		return;
 	release_mem_region(macio_resource_start(dev, resource_no),
 			   macio_resource_len(dev, resource_no));
+	if (dr && resource_no < 32)
+		dr->res_mask &= ~(1 << resource_no);
 }
 
 /**
@@ -744,3 +794,5 @@ EXPORT_SYMBOL(macio_request_resource);
 EXPORT_SYMBOL(macio_release_resource);
 EXPORT_SYMBOL(macio_request_resources);
 EXPORT_SYMBOL(macio_release_resources);
+EXPORT_SYMBOL(macio_enable_devres);
+
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index 029ad8c..08002b8 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -33,15 +33,6 @@
 #include <linux/adb.h>
 #include <linux/pmu.h>
 
-
-#define MB_DEBUG
-
-#ifdef MB_DEBUG
-#define MBDBG(fmt, arg...)	printk(KERN_INFO fmt , ## arg)
-#else
-#define MBDBG(fmt, arg...)	do { } while (0)
-#endif
-
 #define MB_FCR32(bay, r)	((bay)->base + ((r) >> 2))
 #define MB_FCR8(bay, r)		(((volatile u8 __iomem *)((bay)->base)) + (r))
 
@@ -76,28 +67,14 @@ struct media_bay_info {
 	int				index;
 	int				cached_gpio;
 	int				sleeping;
+	int				user_lock;
 	struct mutex			lock;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-	ide_hwif_t			*cd_port;
-	void __iomem			*cd_base;
-	int				cd_irq;
-	int				cd_retry;
-#endif
-#if defined(CONFIG_BLK_DEV_IDE_PMAC)
-	int 				cd_index;
-#endif
 };
 
 #define MAX_BAYS	2
 
 static struct media_bay_info media_bays[MAX_BAYS];
-int media_bay_count = 0;
-
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-/* check the busy bit in the media-bay ide interface
-   (assumes the media-bay contains an ide device) */
-#define MB_IDE_READY(i)	((readb(media_bays[i].cd_base + 0x70) & 0x80) == 0)
-#endif
+static int media_bay_count = 0;
 
 /*
  * Wait that number of ms between each step in normal polling mode
@@ -130,21 +107,11 @@ int media_bay_count = 0;
 
 /*
  * Wait this many ticks after an IDE device (e.g. CD-ROM) is inserted
- * (or until the device is ready) before waiting for busy bit to disappear
+ * (or until the device is ready) before calling into the driver
  */
 #define MB_IDE_WAIT	1000
 
 /*
- * Timeout waiting for busy bit of an IDE device to go down
- */
-#define MB_IDE_TIMEOUT	5000
-
-/*
- * Max retries of the full power up/down sequence for an IDE device
- */
-#define MAX_CD_RETRIES	3
-
-/*
  * States of a media bay
  */
 enum {
@@ -153,7 +120,6 @@ enum {
 	mb_enabling_bay,	/* enable bits set, waiting MB_RESET_DELAY */
 	mb_resetting,		/* reset bit unset, waiting MB_SETUP_DELAY */
 	mb_ide_resetting,	/* IDE reset bit unser, waiting MB_IDE_WAIT */
-	mb_ide_waiting,		/* Waiting for BUSY bit to go away until MB_IDE_TIMEOUT */
 	mb_up,			/* Media bay full */
 	mb_powering_down	/* Powering down (avoid too fast down/up) */
 };
@@ -373,12 +339,12 @@ static inline void set_mb_power(struct media_bay_info* bay, int onoff)
 	if (onoff) {
 		bay->ops->power(bay, 1);
 		bay->state = mb_powering_up;
-		MBDBG("mediabay%d: powering up\n", bay->index);
+		pr_debug("mediabay%d: powering up\n", bay->index);
 	} else { 
 		/* Make sure everything is powered down & disabled */
 		bay->ops->power(bay, 0);
 		bay->state = mb_powering_down;
-		MBDBG("mediabay%d: powering down\n", bay->index);
+		pr_debug("mediabay%d: powering down\n", bay->index);
 	}
 	bay->timer = msecs_to_jiffies(MB_POWER_DELAY);
 }
@@ -387,107 +353,118 @@ static void poll_media_bay(struct media_bay_info* bay)
 {
 	int id = bay->ops->content(bay);
 
-	if (id == bay->last_value) {
-		if (id != bay->content_id) {
-			bay->value_count += msecs_to_jiffies(MB_POLL_DELAY);
-			if (bay->value_count >= msecs_to_jiffies(MB_STABLE_DELAY)) {
-				/* If the device type changes without going thru
-				 * "MB_NO", we force a pass by "MB_NO" to make sure
-				 * things are properly reset
-				 */
-				if ((id != MB_NO) && (bay->content_id != MB_NO)) {
-					id = MB_NO;
-					MBDBG("mediabay%d: forcing MB_NO\n", bay->index);
-				}
-				MBDBG("mediabay%d: switching to %d\n", bay->index, id);
-				set_mb_power(bay, id != MB_NO);
-				bay->content_id = id;
-				if (id == MB_NO) {
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-					bay->cd_retry = 0;
-#endif
-					printk(KERN_INFO "media bay %d is empty\n", bay->index);
-				}
-			}
-		}
-	} else {
+	static char *mb_content_types[] = {
+		"a floppy drive",
+		"a floppy drive",
+		"an unsuported audio device",
+		"an ATA device",
+		"an unsupported PCI device",
+		"an unknown device",
+	};
+
+	if (id != bay->last_value) {
 		bay->last_value = id;
 		bay->value_count = 0;
+		return;
+	}
+	if (id == bay->content_id)
+		return;
+
+	bay->value_count += msecs_to_jiffies(MB_POLL_DELAY);
+	if (bay->value_count >= msecs_to_jiffies(MB_STABLE_DELAY)) {
+		/* If the device type changes without going thru
+		 * "MB_NO", we force a pass by "MB_NO" to make sure
+		 * things are properly reset
+		 */
+		if ((id != MB_NO) && (bay->content_id != MB_NO)) {
+			id = MB_NO;
+			pr_debug("mediabay%d: forcing MB_NO\n", bay->index);
+		}
+		pr_debug("mediabay%d: switching to %d\n", bay->index, id);
+		set_mb_power(bay, id != MB_NO);
+		bay->content_id = id;
+		if (id >= MB_NO || id < 0)
+			printk(KERN_INFO "mediabay%d: Bay is now empty\n", bay->index);
+		else
+			printk(KERN_INFO "mediabay%d: Bay contains %s\n",
+			       bay->index, mb_content_types[id]);
 	}
 }
 
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-int check_media_bay(struct device_node *which_bay, int what)
+int check_media_bay(struct macio_dev *baydev)
 {
-	int	i;
+	struct media_bay_info* bay;
+	int id;
 
-	for (i=0; i<media_bay_count; i++)
-		if (media_bays[i].mdev && which_bay == media_bays[i].mdev->ofdev.node) {
-			if ((what == media_bays[i].content_id) && media_bays[i].state == mb_up)
-				return 0;
-			media_bays[i].cd_index = -1;
-			return -EINVAL;
-		}
-	return -ENODEV;
+	if (baydev == NULL)
+		return MB_NO;
+
+	/* This returns an instant snapshot, not locking, sine
+	 * we may be called with the bay lock held. The resulting
+	 * fuzzyness of the result if called at the wrong time is
+	 * not actually a huge deal
+	 */
+	bay = macio_get_drvdata(baydev);
+	if (bay == NULL)
+		return MB_NO;
+	id = bay->content_id;
+	if (bay->state != mb_up)
+		return MB_NO;
+	if (id == MB_FD1)
+		return MB_FD;
+	return id;
 }
-EXPORT_SYMBOL(check_media_bay);
+EXPORT_SYMBOL_GPL(check_media_bay);
 
-int check_media_bay_by_base(unsigned long base, int what)
+void lock_media_bay(struct macio_dev *baydev)
 {
-	int	i;
-
-	for (i=0; i<media_bay_count; i++)
-		if (media_bays[i].mdev && base == (unsigned long) media_bays[i].cd_base) {
-			if ((what == media_bays[i].content_id) && media_bays[i].state == mb_up)
-				return 0;
-			media_bays[i].cd_index = -1;
-			return -EINVAL;
-		} 
+	struct media_bay_info* bay;
 
-	return -ENODEV;
+	if (baydev == NULL)
+		return;
+	bay = macio_get_drvdata(baydev);
+	if (bay == NULL)
+		return;
+	mutex_lock(&bay->lock);
+	bay->user_lock = 1;
 }
-EXPORT_SYMBOL_GPL(check_media_bay_by_base);
+EXPORT_SYMBOL_GPL(lock_media_bay);
 
-int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base,
-			    int irq, ide_hwif_t *hwif)
+void unlock_media_bay(struct macio_dev *baydev)
 {
-	int	i;
+	struct media_bay_info* bay;
 
-	for (i=0; i<media_bay_count; i++) {
-		struct media_bay_info* bay = &media_bays[i];
-
-		if (bay->mdev && which_bay == bay->mdev->ofdev.node) {
-			int timeout = 5000, index = hwif->index;
-			
-			mutex_lock(&bay->lock);
-
-			bay->cd_port	= hwif;
- 			bay->cd_base	= (void __iomem *) base;
-			bay->cd_irq	= irq;
-
-			if ((MB_CD != bay->content_id) || bay->state != mb_up) {
-				mutex_unlock(&bay->lock);
-				return 0;
-			}
-			printk(KERN_DEBUG "Registered ide%d for media bay %d\n", index, i);
-			do {
-				if (MB_IDE_READY(i)) {
-					bay->cd_index	= index;
-					mutex_unlock(&bay->lock);
-					return 0;
-				}
-				mdelay(1);
-			} while(--timeout);
-			printk(KERN_DEBUG "Timeount waiting IDE in bay %d\n", i);
-			mutex_unlock(&bay->lock);
-			return -ENODEV;
-		}
+	if (baydev == NULL)
+		return;
+	bay = macio_get_drvdata(baydev);
+	if (bay == NULL)
+		return;
+	if (bay->user_lock) {
+		bay->user_lock = 0;
+		mutex_unlock(&bay->lock);
 	}
+}
+EXPORT_SYMBOL_GPL(unlock_media_bay);
 
-	return -ENODEV;
+static int mb_broadcast_hotplug(struct device *dev, void *data)
+{
+	struct media_bay_info* bay = data;
+	struct macio_dev *mdev;
+	struct macio_driver *drv;
+	int state;
+
+	if (dev->bus != &macio_bus_type)
+		return 0;
+
+	state = bay->state == mb_up ? bay->content_id : MB_NO;
+	if (state == MB_FD1)
+		state = MB_FD;
+	mdev = to_macio_device(dev);
+	drv = to_macio_driver(dev->driver);
+	if (dev->driver && drv->mediabay_event)
+		drv->mediabay_event(mdev, state);
+	return 0;
 }
-EXPORT_SYMBOL_GPL(media_bay_set_ide_infos);
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
 
 static void media_bay_step(int i)
 {
@@ -497,8 +474,8 @@ static void media_bay_step(int i)
 	if (bay->state != mb_powering_down)
 	    poll_media_bay(bay);
 
-	/* If timer expired or polling IDE busy, run state machine */
-	if ((bay->state != mb_ide_waiting) && (bay->timer != 0)) {
+	/* If timer expired run state machine */
+	if (bay->timer != 0) {
 		bay->timer -= msecs_to_jiffies(MB_POLL_DELAY);
 		if (bay->timer > 0)
 			return;
@@ -508,100 +485,50 @@ static void media_bay_step(int i)
 	switch(bay->state) {
 	case mb_powering_up:
 	    	if (bay->ops->setup_bus(bay, bay->last_value) < 0) {
-			MBDBG("mediabay%d: device not supported (kind:%d)\n", i, bay->content_id);
+			pr_debug("mediabay%d: device not supported (kind:%d)\n",
+				 i, bay->content_id);
 	    		set_mb_power(bay, 0);
 	    		break;
 	    	}
 	    	bay->timer = msecs_to_jiffies(MB_RESET_DELAY);
 	    	bay->state = mb_enabling_bay;
-		MBDBG("mediabay%d: enabling (kind:%d)\n", i, bay->content_id);
+		pr_debug("mediabay%d: enabling (kind:%d)\n", i, bay->content_id);
 		break;
 	case mb_enabling_bay:
 		bay->ops->un_reset(bay);
 	    	bay->timer = msecs_to_jiffies(MB_SETUP_DELAY);
 	    	bay->state = mb_resetting;
-		MBDBG("mediabay%d: waiting reset (kind:%d)\n", i, bay->content_id);
+		pr_debug("mediabay%d: releasing bay reset (kind:%d)\n",
+			 i, bay->content_id);
 	    	break;
 	case mb_resetting:
 		if (bay->content_id != MB_CD) {
-			MBDBG("mediabay%d: bay is up (kind:%d)\n", i, bay->content_id);
+			pr_debug("mediabay%d: bay is up (kind:%d)\n", i,
+				 bay->content_id);
 			bay->state = mb_up;
+			device_for_each_child(&bay->mdev->ofdev.dev,
+					      bay, mb_broadcast_hotplug);
 			break;
 	    	}
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-		MBDBG("mediabay%d: waiting IDE reset (kind:%d)\n", i, bay->content_id);
+		pr_debug("mediabay%d: releasing ATA reset (kind:%d)\n",
+			 i, bay->content_id);
 		bay->ops->un_reset_ide(bay);
 	    	bay->timer = msecs_to_jiffies(MB_IDE_WAIT);
 	    	bay->state = mb_ide_resetting;
-#else
-		printk(KERN_DEBUG "media-bay %d is ide (not compiled in kernel)\n", i);
-		set_mb_power(bay, 0);
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
 	    	break;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
+
 	case mb_ide_resetting:
-	    	bay->timer = msecs_to_jiffies(MB_IDE_TIMEOUT);
-	    	bay->state = mb_ide_waiting;
-		MBDBG("mediabay%d: waiting IDE ready (kind:%d)\n", i, bay->content_id);
+		pr_debug("mediabay%d: bay is up (kind:%d)\n", i, bay->content_id);
+		bay->state = mb_up;
+		device_for_each_child(&bay->mdev->ofdev.dev,
+				      bay, mb_broadcast_hotplug);
 	    	break;
-	case mb_ide_waiting:
-		if (bay->cd_base == NULL) {
-			bay->timer = 0;
-			bay->state = mb_up;
-			MBDBG("mediabay%d: up before IDE init\n", i);
-			break;
-		} else if (MB_IDE_READY(i)) {
-			bay->timer = 0;
-			bay->state = mb_up;
-			if (bay->cd_index < 0) {
-				printk("mediabay %d, registering IDE...\n", i);
-				pmu_suspend();
-				ide_port_scan(bay->cd_port);
-				if (bay->cd_port->present)
-					bay->cd_index = bay->cd_port->index;
-				pmu_resume();
-			}
-			if (bay->cd_index == -1) {
-				/* We eventually do a retry */
-				bay->cd_retry++;
-				printk("IDE register error\n");
-				set_mb_power(bay, 0);
-			} else {
-				printk(KERN_DEBUG "media-bay %d is ide%d\n", i, bay->cd_index);
-				MBDBG("mediabay %d IDE ready\n", i);
-			}
-			break;
-	    	} else if (bay->timer > 0)
-			bay->timer -= msecs_to_jiffies(MB_POLL_DELAY);
-	    	if (bay->timer <= 0) {
-			printk("\nIDE Timeout in bay %d !, IDE state is: 0x%02x\n",
-			       i, readb(bay->cd_base + 0x70));
-			MBDBG("mediabay%d: nIDE Timeout !\n", i);
-			set_mb_power(bay, 0);
-			bay->timer = 0;
-	    	}
-		break;
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
+
 	case mb_powering_down:
 	    	bay->state = mb_empty;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-    	        if (bay->cd_index >= 0) {
-			printk(KERN_DEBUG "Unregistering mb %d ide, index:%d\n", i,
-			       bay->cd_index);
-			ide_port_unregister_devices(bay->cd_port);
-			bay->cd_index = -1;
-		}
-	    	if (bay->cd_retry) {
-			if (bay->cd_retry > MAX_CD_RETRIES) {
-				/* Should add an error sound (sort of beep in dmasound) */
-				printk("\nmedia-bay %d, IDE device badly inserted or unrecognised\n", i);
-			} else {
-				/* Force a new power down/up sequence */
-				bay->content_id = MB_NO;
-			}
-	    	}
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
-		MBDBG("mediabay%d: end of power down\n", i);
+		device_for_each_child(&bay->mdev->ofdev.dev,
+				      bay, mb_broadcast_hotplug);
+		pr_debug("mediabay%d: end of power down\n", i);
 	    	break;
 	}
 }
@@ -676,11 +603,6 @@ static int __devinit media_bay_attach(struct macio_dev *mdev, const struct of_de
 	bay->last_value = bay->ops->content(bay);
 	bay->value_count = msecs_to_jiffies(MB_STABLE_DELAY);
 	bay->state = mb_empty;
-	do {
-		msleep(MB_POLL_DELAY);
-		media_bay_step(i);
-	} while((bay->state != mb_empty) &&
-		(bay->state != mb_up));
 
 	/* Mark us ready by filling our mdev data */
 	macio_set_drvdata(mdev, bay);
@@ -725,7 +647,7 @@ static int media_bay_resume(struct macio_dev *mdev)
 	       	set_mb_power(bay, 0);
 		msleep(MB_POWER_DELAY);
 	       	if (bay->ops->content(bay) != bay->content_id) {
-			printk("mediabay%d: content changed during sleep...\n", bay->index);
+			printk("mediabay%d: Content changed during sleep...\n", bay->index);
 			mutex_unlock(&bay->lock);
 	       		return 0;
 		}
@@ -733,9 +655,6 @@ static int media_bay_resume(struct macio_dev *mdev)
 	       	bay->last_value = bay->content_id;
 	       	bay->value_count = msecs_to_jiffies(MB_STABLE_DELAY);
 	       	bay->timer = msecs_to_jiffies(MB_POWER_DELAY);
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-	       	bay->cd_retry = 0;
-#endif
 	       	do {
 			msleep(MB_POLL_DELAY);
 	       		media_bay_step(bay->index);
@@ -823,9 +742,6 @@ static int __init media_bay_init(void)
 	for (i=0; i<MAX_BAYS; i++) {
 		memset((char *)&media_bays[i], 0, sizeof(struct media_bay_info));
 		media_bays[i].content_id	= -1;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-		media_bays[i].cd_index		= -1;
-#endif
 	}
 	if (!machine_is(powermac))
 		return 0;
diff --git a/drivers/macintosh/nvram.c b/drivers/macintosh/nvram.c
index b195d75..c876349 100644
--- a/drivers/macintosh/nvram.c
+++ b/drivers/macintosh/nvram.c
@@ -13,7 +13,6 @@
 #include <linux/fcntl.h>
 #include <linux/nvram.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 #include <asm/nvram.h>
 
@@ -21,7 +20,6 @@
 
 static loff_t nvram_llseek(struct file *file, loff_t offset, int origin)
 {
-	lock_kernel();
 	switch (origin) {
 	case 1:
 		offset += file->f_pos;
@@ -30,12 +28,10 @@ static loff_t nvram_llseek(struct file *file, loff_t offset, int origin)
 		offset += NVRAM_SIZE;
 		break;
 	}
-	if (offset < 0) {
-		unlock_kernel();
+	if (offset < 0)
 		return -EINVAL;
-	}
+
 	file->f_pos = offset;
-	unlock_kernel();
 	return file->f_pos;
 }
 
@@ -76,8 +72,7 @@ static ssize_t write_nvram(struct file *file, const char __user *buf,
 	return p - buf;
 }
 
-static int nvram_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long nvram_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	switch(cmd) {
 		case PMAC_NVRAM_GET_OFFSET:
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index 556f0fe..5ff47ba 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -79,6 +79,7 @@ struct thermostat {
 	u8			limits[3];
 	int			last_speed[2];
 	int			last_var[2];
+	int			pwm_inv[2];
 };
 
 static enum {ADT7460, ADT7467} therm_type;
@@ -229,19 +230,23 @@ static void write_fan_speed(struct thermostat *th, int speed, int fan)
 	
 	if (speed >= 0) {
 		manual = read_reg(th, MANUAL_MODE[fan]);
+		manual &= ~INVERT_MASK;
 		write_reg(th, MANUAL_MODE[fan],
-			(manual|MANUAL_MASK) & (~INVERT_MASK));
+			manual | MANUAL_MASK | th->pwm_inv[fan]);
 		write_reg(th, FAN_SPD_SET[fan], speed);
 	} else {
 		/* back to automatic */
 		if(therm_type == ADT7460) {
 			manual = read_reg(th,
 				MANUAL_MODE[fan]) & (~MANUAL_MASK);
-
+			manual &= ~INVERT_MASK;
+			manual |= th->pwm_inv[fan];
 			write_reg(th,
 				MANUAL_MODE[fan], manual|REM_CONTROL[fan]);
 		} else {
 			manual = read_reg(th, MANUAL_MODE[fan]);
+			manual &= ~INVERT_MASK;
+			manual |= th->pwm_inv[fan];
 			write_reg(th, MANUAL_MODE[fan], manual&(~AUTO_MASK));
 		}
 	}
@@ -387,7 +392,7 @@ static int probe_thermostat(struct i2c_client *client,
 	i2c_set_clientdata(client, th);
 	th->clt = client;
 
-	rc = read_reg(th, 0);
+	rc = read_reg(th, CONFIG_REG);
 	if (rc < 0) {
 		dev_err(&client->dev, "Thermostat failed to read config!\n");
 		kfree(th);
@@ -418,6 +423,10 @@ static int probe_thermostat(struct i2c_client *client,
 
 	thermostat = th;
 
+	/* record invert bit status because fw can corrupt it after suspend */
+	th->pwm_inv[0] = read_reg(th, MANUAL_MODE[0]) & INVERT_MASK;
+	th->pwm_inv[1] = read_reg(th, MANUAL_MODE[1]) & INVERT_MASK;
+
 	/* be sure to really write fan speed the first time */
 	th->last_speed[0] = -2;
 	th->last_speed[1] = -2;
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 6f308a4..db379c3 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -36,6 +36,7 @@
 #include <linux/spinlock.h>
 #include <linux/pm.h>
 #include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/device.h>
@@ -186,17 +187,11 @@ static int init_pmu(void);
 static void pmu_start(void);
 static irqreturn_t via_pmu_interrupt(int irq, void *arg);
 static irqreturn_t gpio1_interrupt(int irq, void *arg);
-static int proc_get_info(char *page, char **start, off_t off,
-			  int count, int *eof, void *data);
-static int proc_get_irqstats(char *page, char **start, off_t off,
-			  int count, int *eof, void *data);
+static const struct file_operations pmu_info_proc_fops;
+static const struct file_operations pmu_irqstats_proc_fops;
 static void pmu_pass_intr(unsigned char *data, int len);
-static int proc_get_batt(char *page, char **start, off_t off,
-			int count, int *eof, void *data);
-static int proc_read_options(char *page, char **start, off_t off,
-			int count, int *eof, void *data);
-static int proc_write_options(struct file *file, const char __user *buffer,
-			unsigned long count, void *data);
+static const struct file_operations pmu_battery_proc_fops;
+static const struct file_operations pmu_options_proc_fops;
 
 #ifdef CONFIG_ADB
 struct adb_driver via_pmu_driver = {
@@ -507,19 +502,15 @@ static int __init via_pmu_dev_init(void)
 		for (i=0; i<pmu_battery_count; i++) {
 			char title[16];
 			sprintf(title, "battery_%ld", i);
-			proc_pmu_batt[i] = create_proc_read_entry(title, 0, proc_pmu_root,
-						proc_get_batt, (void *)i);
+			proc_pmu_batt[i] = proc_create_data(title, 0, proc_pmu_root,
+					&pmu_battery_proc_fops, (void *)i);
 		}
 
-		proc_pmu_info = create_proc_read_entry("info", 0, proc_pmu_root,
-					proc_get_info, NULL);
-		proc_pmu_irqstats = create_proc_read_entry("interrupts", 0, proc_pmu_root,
-					proc_get_irqstats, NULL);
-		proc_pmu_options = create_proc_entry("options", 0600, proc_pmu_root);
-		if (proc_pmu_options) {
-			proc_pmu_options->read_proc = proc_read_options;
-			proc_pmu_options->write_proc = proc_write_options;
-		}
+		proc_pmu_info = proc_create("info", 0, proc_pmu_root, &pmu_info_proc_fops);
+		proc_pmu_irqstats = proc_create("interrupts", 0, proc_pmu_root,
+						&pmu_irqstats_proc_fops);
+		proc_pmu_options = proc_create("options", 0600, proc_pmu_root,
+						&pmu_options_proc_fops);
 	}
 	return 0;
 }
@@ -799,27 +790,33 @@ query_battery_state(void)
 			2, PMU_SMART_BATTERY_STATE, pmu_cur_battery+1);
 }
 
-static int
-proc_get_info(char *page, char **start, off_t off,
-		int count, int *eof, void *data)
+static int pmu_info_proc_show(struct seq_file *m, void *v)
 {
-	char* p = page;
-
-	p += sprintf(p, "PMU driver version     : %d\n", PMU_DRIVER_VERSION);
-	p += sprintf(p, "PMU firmware version   : %02x\n", pmu_version);
-	p += sprintf(p, "AC Power               : %d\n",
+	seq_printf(m, "PMU driver version     : %d\n", PMU_DRIVER_VERSION);
+	seq_printf(m, "PMU firmware version   : %02x\n", pmu_version);
+	seq_printf(m, "AC Power               : %d\n",
 		((pmu_power_flags & PMU_PWR_AC_PRESENT) != 0) || pmu_battery_count == 0);
-	p += sprintf(p, "Battery count          : %d\n", pmu_battery_count);
+	seq_printf(m, "Battery count          : %d\n", pmu_battery_count);
+
+	return 0;
+}
 
-	return p - page;
+static int pmu_info_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pmu_info_proc_show, NULL);
 }
 
-static int
-proc_get_irqstats(char *page, char **start, off_t off,
-		  int count, int *eof, void *data)
+static const struct file_operations pmu_info_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= pmu_info_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int pmu_irqstats_proc_show(struct seq_file *m, void *v)
 {
 	int i;
-	char* p = page;
 	static const char *irq_names[] = {
 		"Total CB1 triggered events",
 		"Total GPIO1 triggered events",
@@ -835,60 +832,76 @@ proc_get_irqstats(char *page, char **start, off_t off,
         };
 
 	for (i=0; i<11; i++) {
-		p += sprintf(p, " %2u: %10u (%s)\n",
+		seq_printf(m, " %2u: %10u (%s)\n",
 			     i, pmu_irq_stats[i], irq_names[i]);
 	}
-	return p - page;
+	return 0;
 }
 
-static int
-proc_get_batt(char *page, char **start, off_t off,
-		int count, int *eof, void *data)
+static int pmu_irqstats_proc_open(struct inode *inode, struct file *file)
 {
-	long batnum = (long)data;
-	char *p = page;
+	return single_open(file, pmu_irqstats_proc_show, NULL);
+}
+
+static const struct file_operations pmu_irqstats_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= pmu_irqstats_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int pmu_battery_proc_show(struct seq_file *m, void *v)
+{
+	long batnum = (long)m->private;
 	
-	p += sprintf(p, "\n");
-	p += sprintf(p, "flags      : %08x\n",
-		pmu_batteries[batnum].flags);
-	p += sprintf(p, "charge     : %d\n",
-		pmu_batteries[batnum].charge);
-	p += sprintf(p, "max_charge : %d\n",
-		pmu_batteries[batnum].max_charge);
-	p += sprintf(p, "current    : %d\n",
-		pmu_batteries[batnum].amperage);
-	p += sprintf(p, "voltage    : %d\n",
-		pmu_batteries[batnum].voltage);
-	p += sprintf(p, "time rem.  : %d\n",
-		pmu_batteries[batnum].time_remaining);
-
-	return p - page;
+	seq_putc(m, '\n');
+	seq_printf(m, "flags      : %08x\n", pmu_batteries[batnum].flags);
+	seq_printf(m, "charge     : %d\n", pmu_batteries[batnum].charge);
+	seq_printf(m, "max_charge : %d\n", pmu_batteries[batnum].max_charge);
+	seq_printf(m, "current    : %d\n", pmu_batteries[batnum].amperage);
+	seq_printf(m, "voltage    : %d\n", pmu_batteries[batnum].voltage);
+	seq_printf(m, "time rem.  : %d\n", pmu_batteries[batnum].time_remaining);
+	return 0;
 }
 
-static int
-proc_read_options(char *page, char **start, off_t off,
-			int count, int *eof, void *data)
+static int pmu_battery_proc_open(struct inode *inode, struct file *file)
 {
-	char *p = page;
+	return single_open(file, pmu_battery_proc_show, PDE(inode)->data);
+}
 
+static const struct file_operations pmu_battery_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= pmu_battery_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int pmu_options_proc_show(struct seq_file *m, void *v)
+{
 #if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
 	if (pmu_kind == PMU_KEYLARGO_BASED &&
 	    pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
-		p += sprintf(p, "lid_wakeup=%d\n", option_lid_wakeup);
+		seq_printf(m, "lid_wakeup=%d\n", option_lid_wakeup);
 #endif
 	if (pmu_kind == PMU_KEYLARGO_BASED)
-		p += sprintf(p, "server_mode=%d\n", option_server_mode);
+		seq_printf(m, "server_mode=%d\n", option_server_mode);
 
-	return p - page;
+	return 0;
 }
-			
-static int
-proc_write_options(struct file *file, const char __user *buffer,
-			unsigned long count, void *data)
+
+static int pmu_options_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pmu_options_proc_show, NULL);
+}
+
+static ssize_t pmu_options_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *pos)
 {
 	char tmp[33];
 	char *label, *val;
-	unsigned long fcount = count;
+	size_t fcount = count;
 	
 	if (!count)
 		return -EINVAL;
@@ -927,6 +940,15 @@ proc_write_options(struct file *file, const char __user *buffer,
 	return fcount;
 }
 
+static const struct file_operations pmu_options_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= pmu_options_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= pmu_options_proc_write,
+};
+
 #ifdef CONFIG_ADB
 /* Send an ADB command */
 static int pmu_send_request(struct adb_request *req, int sync)
diff --git a/drivers/macintosh/windfarm_smu_controls.c b/drivers/macintosh/windfarm_smu_controls.c
index 961fa0e..6c68b9e 100644
--- a/drivers/macintosh/windfarm_smu_controls.c
+++ b/drivers/macintosh/windfarm_smu_controls.c
@@ -202,6 +202,8 @@ static struct smu_fan_control *smu_fan_create(struct device_node *node,
 		fct->ctrl.name = "cpu-front-fan-1";
 	else if (!strcmp(l, "CPU A PUMP"))
 		fct->ctrl.name = "cpu-pump-0";
+	else if (!strcmp(l, "CPU B PUMP"))
+		fct->ctrl.name = "cpu-pump-1";
 	else if (!strcmp(l, "Slots Fan") || !strcmp(l, "Slots fan") ||
 		 !strcmp(l, "EXPANSION SLOTS INTAKE"))
 		fct->ctrl.name = "slots-fan";