Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds

Pull LED subsystem updates from Bryan Wu:
 "In this cycle, we finished to merge patches for LED Flash class
  driver.

  Other than that we have some bug fixes and new drivers for LED
  controllers"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (33 commits)
  leds:lp55xx: fix firmware loading error
  leds: fix max77693-led build errors
  leds: fix aat1290 build errors
  leds: aat1290: pass flags parameter to devm_gpiod_get
  leds: ktd2692: pass flags parameter to devm_gpiod_get
  drivers/leds: don't use module_init in non-modular leds-cobalt-raq.c
  leds: aat1290: add support for V4L2 Flash sub-device
  DT: aat1290: Document handling external strobe sources
  leds: max77693: add support for V4L2 Flash sub-device
  media: Add registration helpers for V4L2 flash sub-devices
  v4l: async: Add a pointer to of_node to struct v4l2_subdev, match it
  Documentation: leds: Add description of v4l2-flash sub-device
  leds: add BCM6358 LED driver
  leds: add DT binding for BCM6358 LED controller
  leds: fix brightness changing when software blinking is active
  Documentation: leds-lp5523: describe master fader attributes
  leds: lp5523: add master_fader support
  leds: leds-gpio: Allow compile test if !GPIOLIB
  leds: leds-gpio: Add missing #include <linux/of.h>
  gpiolib: Add missing dummies for the unified device properties interface
  ...

15 files changed, 3300 insertions, 46 deletions

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 4191614..9ad35f7 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -39,6 +39,32 @@ config LEDS_88PM860X
 	  This option enables support for on-chip LED drivers found on Marvell
 	  Semiconductor 88PM8606 PMIC.
 
+config LEDS_AAT1290
+	tristate "LED support for the AAT1290"
+	depends on LEDS_CLASS_FLASH
+	depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
+	depends on GPIOLIB
+	depends on OF
+	depends on PINCTRL
+	help
+	 This option enables support for the LEDs on the AAT1290.
+
+config LEDS_BCM6328
+	tristate "LED Support for Broadcom BCM6328"
+	depends on LEDS_CLASS
+	depends on OF
+	help
+	  This option enables support for LEDs connected to the BCM6328
+	  LED HW controller accessed via MMIO registers.
+
+config LEDS_BCM6358
+	tristate "LED Support for Broadcom BCM6358"
+	depends on LEDS_CLASS
+	depends on OF
+	help
+	  This option enables support for LEDs connected to the BCM6358
+	  LED HW controller accessed via MMIO registers.
+
 config LEDS_LM3530
 	tristate "LCD Backlight driver for LM3530"
 	depends on LEDS_CLASS
@@ -179,7 +205,7 @@ config LEDS_PCA9532_GPIO
 config LEDS_GPIO
 	tristate "LED Support for GPIO connected LEDs"
 	depends on LEDS_CLASS
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  This option enables support for the LEDs connected to GPIO
 	  outputs. To be useful the particular board must have LEDs
@@ -203,6 +229,7 @@ config LEDS_LP55XX_COMMON
 	tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
 	depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501
 	select FW_LOADER
+	select FW_LOADER_USER_HELPER_FALLBACK
 	help
 	  This option supports common operations for LP5521/5523/55231/5562/8501
 	  devices.
@@ -464,6 +491,25 @@ config LEDS_TCA6507
 	  LED driver chips accessed via the I2C bus.
 	  Driver support brightness control and hardware-assisted blinking.
 
+config LEDS_TLC591XX
+	tristate "LED driver for TLC59108 and TLC59116 controllers"
+	depends on LEDS_CLASS && I2C
+	select REGMAP_I2C
+	help
+	  This option enables support for Texas Instruments TLC59108
+	  and TLC59116 LED controllers.
+
+config LEDS_MAX77693
+	tristate "LED support for MAX77693 Flash"
+	depends on LEDS_CLASS_FLASH
+	depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
+	depends on MFD_MAX77693
+	depends on OF
+	help
+	  This option enables support for the flash part of the MAX77693
+	  multifunction device. It has build in control for two leds in flash
+	  and torch mode.
+
 config LEDS_MAX8997
 	tristate "LED support for MAX8997 PMIC"
 	depends on LEDS_CLASS && MFD_MAX8997
@@ -495,6 +541,15 @@ config LEDS_MENF21BMC
 	  This driver can also be built as a module. If so the module
 	  will be called leds-menf21bmc.
 
+config LEDS_KTD2692
+	tristate "LED support for KTD2692 flash LED controller"
+	depends on LEDS_CLASS_FLASH && GPIOLIB && OF
+	help
+	  This option enables support for KTD2692 LED flash connected
+	  through ExpressWire interface.
+
+	  Say Y to enable this driver.
+
 comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
 
 config LEDS_BLINKM
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index bf46093..8d6a24a 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -7,6 +7,9 @@ obj-$(CONFIG_LEDS_TRIGGERS)		+= led-triggers.o
 
 # LED Platform Drivers
 obj-$(CONFIG_LEDS_88PM860X)		+= leds-88pm860x.o
+obj-$(CONFIG_LEDS_AAT1290)		+= leds-aat1290.o
+obj-$(CONFIG_LEDS_BCM6328)		+= leds-bcm6328.o
+obj-$(CONFIG_LEDS_BCM6358)		+= leds-bcm6358.o
 obj-$(CONFIG_LEDS_BD2802)		+= leds-bd2802.o
 obj-$(CONFIG_LEDS_LOCOMO)		+= leds-locomo.o
 obj-$(CONFIG_LEDS_LM3530)		+= leds-lm3530.o
@@ -31,6 +34,7 @@ obj-$(CONFIG_LEDS_LP8501)		+= leds-lp8501.o
 obj-$(CONFIG_LEDS_LP8788)		+= leds-lp8788.o
 obj-$(CONFIG_LEDS_LP8860)		+= leds-lp8860.o
 obj-$(CONFIG_LEDS_TCA6507)		+= leds-tca6507.o
+obj-$(CONFIG_LEDS_TLC591XX)		+= leds-tlc591xx.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
 obj-$(CONFIG_LEDS_IPAQ_MICRO)		+= leds-ipaq-micro.o
 obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
@@ -52,6 +56,7 @@ obj-$(CONFIG_LEDS_MC13783)		+= leds-mc13783.o
 obj-$(CONFIG_LEDS_NS2)			+= leds-ns2.o
 obj-$(CONFIG_LEDS_NETXBIG)		+= leds-netxbig.o
 obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.o
+obj-$(CONFIG_LEDS_MAX77693)		+= leds-max77693.o
 obj-$(CONFIG_LEDS_MAX8997)		+= leds-max8997.o
 obj-$(CONFIG_LEDS_LM355x)		+= leds-lm355x.o
 obj-$(CONFIG_LEDS_BLINKM)		+= leds-blinkm.o
@@ -59,6 +64,7 @@ obj-$(CONFIG_LEDS_SYSCON)		+= leds-syscon.o
 obj-$(CONFIG_LEDS_VERSATILE)		+= leds-versatile.o
 obj-$(CONFIG_LEDS_MENF21BMC)		+= leds-menf21bmc.o
 obj-$(CONFIG_LEDS_PM8941_WLED)		+= leds-pm8941-wled.o
+obj-$(CONFIG_LEDS_KTD2692)		+= leds-ktd2692.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 7fb2a19..beabfbc 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -121,6 +121,11 @@ static void led_timer_function(unsigned long data)
 	brightness = led_get_brightness(led_cdev);
 	if (!brightness) {
 		/* Time to switch the LED on. */
+		if (led_cdev->delayed_set_value) {
+			led_cdev->blink_brightness =
+					led_cdev->delayed_set_value;
+			led_cdev->delayed_set_value = 0;
+		}
 		brightness = led_cdev->blink_brightness;
 		delay = led_cdev->blink_delay_on;
 	} else {
diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c
index 9886dac..549de7e 100644
--- a/drivers/leds/led-core.c
+++ b/drivers/leds/led-core.c
@@ -119,10 +119,11 @@ void led_set_brightness(struct led_classdev *led_cdev,
 {
 	int ret = 0;
 
-	/* delay brightness setting if need to stop soft-blink timer */
+	/* delay brightness if soft-blink is active */
 	if (led_cdev->blink_delay_on || led_cdev->blink_delay_off) {
 		led_cdev->delayed_set_value = brightness;
-		schedule_work(&led_cdev->set_brightness_work);
+		if (brightness == LED_OFF)
+			schedule_work(&led_cdev->set_brightness_work);
 		return;
 	}
 
diff --git a/drivers/leds/leds-aat1290.c b/drivers/leds/leds-aat1290.c
new file mode 100644
index 0000000..fd7c25f
--- /dev/null
+++ b/drivers/leds/leds-aat1290.c
@@ -0,0 +1,576 @@
+/*
+ *	LED Flash class driver for the AAT1290
+ *	1.5A Step-Up Current Regulator for Flash LEDs
+ *
+ *	Copyright (C) 2015, Samsung Electronics Co., Ltd.
+ *	Author: Jacek Anaszewski <j.anaszewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/led-class-flash.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <media/v4l2-flash-led-class.h>
+
+#define AAT1290_MOVIE_MODE_CURRENT_ADDR	17
+#define AAT1290_MAX_MM_CURR_PERCENT_0	16
+#define AAT1290_MAX_MM_CURR_PERCENT_100	1
+
+#define AAT1290_FLASH_SAFETY_TIMER_ADDR	18
+
+#define AAT1290_MOVIE_MODE_CONFIG_ADDR	19
+#define AAT1290_MOVIE_MODE_OFF		1
+#define AAT1290_MOVIE_MODE_ON		3
+
+#define AAT1290_MM_CURRENT_RATIO_ADDR	20
+#define AAT1290_MM_TO_FL_1_92		1
+
+#define AAT1290_MM_TO_FL_RATIO		1000 / 1920
+#define AAT1290_MAX_MM_CURRENT(fl_max)	(fl_max * AAT1290_MM_TO_FL_RATIO)
+
+#define AAT1290_LATCH_TIME_MIN_US	500
+#define AAT1290_LATCH_TIME_MAX_US	1000
+#define AAT1290_EN_SET_TICK_TIME_US	1
+#define AAT1290_FLEN_OFF_DELAY_TIME_US	10
+#define AAT1290_FLASH_TM_NUM_LEVELS	16
+#define AAT1290_MM_CURRENT_SCALE_SIZE	15
+
+
+struct aat1290_led_config_data {
+	/* maximum LED current in movie mode */
+	u32 max_mm_current;
+	/* maximum LED current in flash mode */
+	u32 max_flash_current;
+	/* maximum flash timeout */
+	u32 max_flash_tm;
+	/* external strobe capability */
+	bool has_external_strobe;
+	/* max LED brightness level */
+	enum led_brightness max_brightness;
+};
+
+struct aat1290_led {
+	/* platform device data */
+	struct platform_device *pdev;
+	/* secures access to the device */
+	struct mutex lock;
+
+	/* corresponding LED Flash class device */
+	struct led_classdev_flash fled_cdev;
+	/* V4L2 Flash device */
+	struct v4l2_flash *v4l2_flash;
+
+	/* FLEN pin */
+	struct gpio_desc *gpio_fl_en;
+	/* EN|SET pin  */
+	struct gpio_desc *gpio_en_set;
+	/* movie mode current scale */
+	int *mm_current_scale;
+	/* device mode */
+	bool movie_mode;
+
+	/* brightness cache */
+	unsigned int torch_brightness;
+	/* assures led-triggers compatibility */
+	struct work_struct work_brightness_set;
+};
+
+static struct aat1290_led *fled_cdev_to_led(
+				struct led_classdev_flash *fled_cdev)
+{
+	return container_of(fled_cdev, struct aat1290_led, fled_cdev);
+}
+
+static void aat1290_as2cwire_write(struct aat1290_led *led, int addr, int value)
+{
+	int i;
+
+	gpiod_direction_output(led->gpio_fl_en, 0);
+	gpiod_direction_output(led->gpio_en_set, 0);
+
+	udelay(AAT1290_FLEN_OFF_DELAY_TIME_US);
+
+	/* write address */
+	for (i = 0; i < addr; ++i) {
+		udelay(AAT1290_EN_SET_TICK_TIME_US);
+		gpiod_direction_output(led->gpio_en_set, 0);
+		udelay(AAT1290_EN_SET_TICK_TIME_US);
+		gpiod_direction_output(led->gpio_en_set, 1);
+	}
+
+	usleep_range(AAT1290_LATCH_TIME_MIN_US, AAT1290_LATCH_TIME_MAX_US);
+
+	/* write data */
+	for (i = 0; i < value; ++i) {
+		udelay(AAT1290_EN_SET_TICK_TIME_US);
+		gpiod_direction_output(led->gpio_en_set, 0);
+		udelay(AAT1290_EN_SET_TICK_TIME_US);
+		gpiod_direction_output(led->gpio_en_set, 1);
+	}
+
+	usleep_range(AAT1290_LATCH_TIME_MIN_US, AAT1290_LATCH_TIME_MAX_US);
+}
+
+static void aat1290_set_flash_safety_timer(struct aat1290_led *led,
+					unsigned int micro_sec)
+{
+	struct led_classdev_flash *fled_cdev = &led->fled_cdev;
+	struct led_flash_setting *flash_tm = &fled_cdev->timeout;
+	int flash_tm_reg = AAT1290_FLASH_TM_NUM_LEVELS -
+				(micro_sec / flash_tm->step) + 1;
+
+	aat1290_as2cwire_write(led, AAT1290_FLASH_SAFETY_TIMER_ADDR,
+							flash_tm_reg);
+}
+
+static void aat1290_brightness_set(struct aat1290_led *led,
+					enum led_brightness brightness)
+{
+	mutex_lock(&led->lock);
+
+	if (brightness == 0) {
+		gpiod_direction_output(led->gpio_fl_en, 0);
+		gpiod_direction_output(led->gpio_en_set, 0);
+		led->movie_mode = false;
+	} else {
+		if (!led->movie_mode) {
+			aat1290_as2cwire_write(led,
+				AAT1290_MM_CURRENT_RATIO_ADDR,
+				AAT1290_MM_TO_FL_1_92);
+			led->movie_mode = true;
+		}
+
+		aat1290_as2cwire_write(led, AAT1290_MOVIE_MODE_CURRENT_ADDR,
+				AAT1290_MAX_MM_CURR_PERCENT_0 - brightness);
+		aat1290_as2cwire_write(led, AAT1290_MOVIE_MODE_CONFIG_ADDR,
+				AAT1290_MOVIE_MODE_ON);
+	}
+
+	mutex_unlock(&led->lock);
+}
+
+/* LED subsystem callbacks */
+
+static void aat1290_brightness_set_work(struct work_struct *work)
+{
+	struct aat1290_led *led =
+		container_of(work, struct aat1290_led, work_brightness_set);
+
+	aat1290_brightness_set(led, led->torch_brightness);
+}
+
+static void aat1290_led_brightness_set(struct led_classdev *led_cdev,
+					enum led_brightness brightness)
+{
+	struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+	struct aat1290_led *led = fled_cdev_to_led(fled_cdev);
+
+	led->torch_brightness = brightness;
+	schedule_work(&led->work_brightness_set);
+}
+
+static int aat1290_led_brightness_set_sync(struct led_classdev *led_cdev,
+					enum led_brightness brightness)
+{
+	struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+	struct aat1290_led *led = fled_cdev_to_led(fled_cdev);
+
+	aat1290_brightness_set(led, brightness);
+
+	return 0;
+}
+
+static int aat1290_led_flash_strobe_set(struct led_classdev_flash *fled_cdev,
+					 bool state)
+
+{
+	struct aat1290_led *led = fled_cdev_to_led(fled_cdev);
+	struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+	struct led_flash_setting *timeout = &fled_cdev->timeout;
+
+	mutex_lock(&led->lock);
+
+	if (state) {
+		aat1290_set_flash_safety_timer(led, timeout->val);
+		gpiod_direction_output(led->gpio_fl_en, 1);
+	} else {
+		gpiod_direction_output(led->gpio_fl_en, 0);
+		gpiod_direction_output(led->gpio_en_set, 0);
+	}
+
+	/*
+	 * To reenter movie mode after a flash event the part must be cycled
+	 * off and back on to reset the movie mode and reprogrammed via the
+	 * AS2Cwire. Therefore the brightness and movie_mode properties needs
+	 * to be updated here to reflect the actual state.
+	 */
+	led_cdev->brightness = 0;
+	led->movie_mode = false;
+
+	mutex_unlock(&led->lock);
+
+	return 0;
+}
+
+static int aat1290_led_flash_timeout_set(struct led_classdev_flash *fled_cdev,
+						u32 timeout)
+{
+	/*
+	 * Don't do anything - flash timeout is cached in the led-class-flash
+	 * core and will be applied in the strobe_set op, as writing the
+	 * safety timer register spuriously turns the torch mode on.
+	 */
+
+	return 0;
+}
+
+static int aat1290_led_parse_dt(struct aat1290_led *led,
+			struct aat1290_led_config_data *cfg,
+			struct device_node **sub_node)
+{
+	struct led_classdev *led_cdev = &led->fled_cdev.led_cdev;
+	struct device *dev = &led->pdev->dev;
+	struct device_node *child_node;
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+	struct pinctrl *pinctrl;
+#endif
+	int ret = 0;
+
+	led->gpio_fl_en = devm_gpiod_get(dev, "flen", GPIOD_ASIS);
+	if (IS_ERR(led->gpio_fl_en)) {
+		ret = PTR_ERR(led->gpio_fl_en);
+		dev_err(dev, "Unable to claim gpio \"flen\".\n");
+		return ret;
+	}
+
+	led->gpio_en_set = devm_gpiod_get(dev, "enset", GPIOD_ASIS);
+	if (IS_ERR(led->gpio_en_set)) {
+		ret = PTR_ERR(led->gpio_en_set);
+		dev_err(dev, "Unable to claim gpio \"enset\".\n");
+		return ret;
+	}
+
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+	pinctrl = devm_pinctrl_get_select_default(&led->pdev->dev);
+	if (IS_ERR(pinctrl)) {
+		cfg->has_external_strobe = false;
+		dev_info(dev,
+			 "No support for external strobe detected.\n");
+	} else {
+		cfg->has_external_strobe = true;
+	}
+#endif
+
+	child_node = of_get_next_available_child(dev->of_node, NULL);
+	if (!child_node) {
+		dev_err(dev, "No DT child node found for connected LED.\n");
+		return -EINVAL;
+	}
+
+	led_cdev->name = of_get_property(child_node, "label", NULL) ? :
+						child_node->name;
+
+	ret = of_property_read_u32(child_node, "led-max-microamp",
+				&cfg->max_mm_current);
+	/*
+	 * led-max-microamp will default to 1/20 of flash-max-microamp
+	 * in case it is missing.
+	 */
+	if (ret < 0)
+		dev_warn(dev,
+			"led-max-microamp DT property missing\n");
+
+	ret = of_property_read_u32(child_node, "flash-max-microamp",
+				&cfg->max_flash_current);
+	if (ret < 0) {
+		dev_err(dev,
+			"flash-max-microamp DT property missing\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(child_node, "flash-max-timeout-us",
+				&cfg->max_flash_tm);
+	if (ret < 0) {
+		dev_err(dev,
+			"flash-max-timeout-us DT property missing\n");
+		return ret;
+	}
+
+	of_node_put(child_node);
+
+	*sub_node = child_node;
+
+	return ret;
+}
+
+static void aat1290_led_validate_mm_current(struct aat1290_led *led,
+					struct aat1290_led_config_data *cfg)
+{
+	int i, b = 0, e = AAT1290_MM_CURRENT_SCALE_SIZE;
+
+	while (e - b > 1) {
+		i = b + (e - b) / 2;
+		if (cfg->max_mm_current < led->mm_current_scale[i])
+			e = i;
+		else
+			b = i;
+	}
+
+	cfg->max_mm_current = led->mm_current_scale[b];
+	cfg->max_brightness = b + 1;
+}
+
+int init_mm_current_scale(struct aat1290_led *led,
+			struct aat1290_led_config_data *cfg)
+{
+	int max_mm_current_percent[] = { 20, 22, 25, 28, 32, 36, 40, 45, 50, 56,
+						63, 71, 79, 89, 100 };
+	int i, max_mm_current =
+			AAT1290_MAX_MM_CURRENT(cfg->max_flash_current);
+
+	led->mm_current_scale = devm_kzalloc(&led->pdev->dev,
+					sizeof(max_mm_current_percent),
+					GFP_KERNEL);
+	if (!led->mm_current_scale)
+		return -ENOMEM;
+
+	for (i = 0; i < AAT1290_MM_CURRENT_SCALE_SIZE; ++i)
+		led->mm_current_scale[i] = max_mm_current *
+					  max_mm_current_percent[i] / 100;
+
+	return 0;
+}
+
+static int aat1290_led_get_configuration(struct aat1290_led *led,
+					struct aat1290_led_config_data *cfg,
+					struct device_node **sub_node)
+{
+	int ret;
+
+	ret = aat1290_led_parse_dt(led, cfg, sub_node);
+	if (ret < 0)
+		return ret;
+	/*
+	 * Init non-linear movie mode current scale basing
+	 * on the max flash current from led configuration.
+	 */
+	ret = init_mm_current_scale(led, cfg);
+	if (ret < 0)
+		return ret;
+
+	aat1290_led_validate_mm_current(led, cfg);
+
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+#else
+	devm_kfree(&led->pdev->dev, led->mm_current_scale);
+#endif
+
+	return 0;
+}
+
+static void aat1290_init_flash_timeout(struct aat1290_led *led,
+				struct aat1290_led_config_data *cfg)
+{
+	struct led_classdev_flash *fled_cdev = &led->fled_cdev;
+	struct led_flash_setting *setting;
+
+	/* Init flash timeout setting */
+	setting = &fled_cdev->timeout;
+	setting->min = cfg->max_flash_tm / AAT1290_FLASH_TM_NUM_LEVELS;
+	setting->max = cfg->max_flash_tm;
+	setting->step = setting->min;
+	setting->val = setting->max;
+}
+
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+static enum led_brightness aat1290_intensity_to_brightness(
+					struct v4l2_flash *v4l2_flash,
+					s32 intensity)
+{
+	struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+	struct aat1290_led *led = fled_cdev_to_led(fled_cdev);
+	int i;
+
+	for (i = AAT1290_MM_CURRENT_SCALE_SIZE - 1; i >= 0; --i)
+		if (intensity >= led->mm_current_scale[i])
+			return i + 1;
+
+	return 1;
+}
+
+static s32 aat1290_brightness_to_intensity(struct v4l2_flash *v4l2_flash,
+					enum led_brightness brightness)
+{
+	struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+	struct aat1290_led *led = fled_cdev_to_led(fled_cdev);
+
+	return led->mm_current_scale[brightness - 1];
+}
+
+static int aat1290_led_external_strobe_set(struct v4l2_flash *v4l2_flash,
+						bool enable)
+{
+	struct aat1290_led *led = fled_cdev_to_led(v4l2_flash->fled_cdev);
+	struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+	struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+	struct pinctrl *pinctrl;
+
+	gpiod_direction_output(led->gpio_fl_en, 0);
+	gpiod_direction_output(led->gpio_en_set, 0);
+
+	led->movie_mode = false;
+	led_cdev->brightness = 0;
+
+	pinctrl = devm_pinctrl_get_select(&led->pdev->dev,
+						enable ? "isp" : "host");
+	if (IS_ERR(pinctrl)) {
+		dev_warn(&led->pdev->dev, "Unable to switch strobe source.\n");
+		return PTR_ERR(pinctrl);
+	}
+
+	return 0;
+}
+
+static void aat1290_init_v4l2_flash_config(struct aat1290_led *led,
+					struct aat1290_led_config_data *led_cfg,
+					struct v4l2_flash_config *v4l2_sd_cfg)
+{
+	struct led_classdev *led_cdev = &led->fled_cdev.led_cdev;
+	struct led_flash_setting *s;
+
+	strlcpy(v4l2_sd_cfg->dev_name, led_cdev->name,
+		sizeof(v4l2_sd_cfg->dev_name));
+
+	s = &v4l2_sd_cfg->torch_intensity;
+	s->min = led->mm_current_scale[0];
+	s->max = led_cfg->max_mm_current;
+	s->step = 1;
+	s->val = s->max;
+
+	v4l2_sd_cfg->has_external_strobe = led_cfg->has_external_strobe;
+}
+
+static const struct v4l2_flash_ops v4l2_flash_ops = {
+	.external_strobe_set = aat1290_led_external_strobe_set,
+	.intensity_to_led_brightness = aat1290_intensity_to_brightness,
+	.led_brightness_to_intensity = aat1290_brightness_to_intensity,
+};
+#else
+static inline void aat1290_init_v4l2_flash_config(struct aat1290_led *led,
+				struct aat1290_led_config_data *led_cfg,
+				struct v4l2_flash_config *v4l2_sd_cfg)
+{
+}
+static const struct v4l2_flash_ops v4l2_flash_ops;
+#endif
+
+static const struct led_flash_ops flash_ops = {
+	.strobe_set = aat1290_led_flash_strobe_set,
+	.timeout_set = aat1290_led_flash_timeout_set,
+};
+
+static int aat1290_led_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *sub_node = NULL;
+	struct aat1290_led *led;
+	struct led_classdev *led_cdev;
+	struct led_classdev_flash *fled_cdev;
+	struct aat1290_led_config_data led_cfg = {};
+	struct v4l2_flash_config v4l2_sd_cfg = {};
+	int ret;
+
+	led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	led->pdev = pdev;
+	platform_set_drvdata(pdev, led);
+
+	fled_cdev = &led->fled_cdev;
+	fled_cdev->ops = &flash_ops;
+	led_cdev = &fled_cdev->led_cdev;
+
+	ret = aat1290_led_get_configuration(led, &led_cfg, &sub_node);
+	if (ret < 0)
+		return ret;
+
+	mutex_init(&led->lock);
+
+	/* Initialize LED Flash class device */
+	led_cdev->brightness_set = aat1290_led_brightness_set;
+	led_cdev->brightness_set_sync = aat1290_led_brightness_set_sync;
+	led_cdev->max_brightness = led_cfg.max_brightness;
+	led_cdev->flags |= LED_DEV_CAP_FLASH;
+	INIT_WORK(&led->work_brightness_set, aat1290_brightness_set_work);
+
+	aat1290_init_flash_timeout(led, &led_cfg);
+
+	/* Register LED Flash class device */
+	ret = led_classdev_flash_register(&pdev->dev, fled_cdev);
+	if (ret < 0)
+		goto err_flash_register;
+
+	aat1290_init_v4l2_flash_config(led, &led_cfg, &v4l2_sd_cfg);
+
+	/* Create V4L2 Flash subdev. */
+	led->v4l2_flash = v4l2_flash_init(dev, sub_node, fled_cdev, NULL,
+					  &v4l2_flash_ops, &v4l2_sd_cfg);
+	if (IS_ERR(led->v4l2_flash)) {
+		ret = PTR_ERR(led->v4l2_flash);
+		goto error_v4l2_flash_init;
+	}
+
+	return 0;
+
+error_v4l2_flash_init:
+	led_classdev_flash_unregister(fled_cdev);
+err_flash_register:
+	mutex_destroy(&led->lock);
+
+	return ret;
+}
+
+static int aat1290_led_remove(struct platform_device *pdev)
+{
+	struct aat1290_led *led = platform_get_drvdata(pdev);
+
+	v4l2_flash_release(led->v4l2_flash);
+	led_classdev_flash_unregister(&led->fled_cdev);
+	cancel_work_sync(&led->work_brightness_set);
+
+	mutex_destroy(&led->lock);
+
+	return 0;
+}
+
+static const struct of_device_id aat1290_led_dt_match[] = {
+	{ .compatible = "skyworks,aat1290" },
+	{},
+};
+
+static struct platform_driver aat1290_led_driver = {
+	.probe		= aat1290_led_probe,
+	.remove		= aat1290_led_remove,
+	.driver		= {
+		.name	= "aat1290",
+		.of_match_table = aat1290_led_dt_match,
+	},
+};
+
+module_platform_driver(aat1290_led_driver);
+
+MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>");
+MODULE_DESCRIPTION("Skyworks Current Regulator for Flash LEDs");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-bcm6328.c b/drivers/leds/leds-bcm6328.c
new file mode 100644
index 0000000..986fe1e
--- /dev/null
+++ b/drivers/leds/leds-bcm6328.c
@@ -0,0 +1,413 @@
+/*
+ * Driver for BCM6328 memory-mapped LEDs, based on leds-syscon.c
+ *
+ * Copyright 2015 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright 2015 Jonas Gorski <jogo@openwrt.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#define BCM6328_REG_INIT		0x00
+#define BCM6328_REG_MODE_HI		0x04
+#define BCM6328_REG_MODE_LO		0x08
+#define BCM6328_REG_HWDIS		0x0c
+#define BCM6328_REG_STROBE		0x10
+#define BCM6328_REG_LNKACTSEL_HI	0x14
+#define BCM6328_REG_LNKACTSEL_LO	0x18
+#define BCM6328_REG_RBACK		0x1c
+#define BCM6328_REG_SERMUX		0x20
+
+#define BCM6328_LED_MAX_COUNT		24
+#define BCM6328_LED_DEF_DELAY		500
+#define BCM6328_LED_INTERVAL_MS		20
+
+#define BCM6328_LED_INTV_MASK		0x3f
+#define BCM6328_LED_FAST_INTV_SHIFT	6
+#define BCM6328_LED_FAST_INTV_MASK	(BCM6328_LED_INTV_MASK << \
+					 BCM6328_LED_FAST_INTV_SHIFT)
+#define BCM6328_SERIAL_LED_EN		BIT(12)
+#define BCM6328_SERIAL_LED_MUX		BIT(13)
+#define BCM6328_SERIAL_LED_CLK_NPOL	BIT(14)
+#define BCM6328_SERIAL_LED_DATA_PPOL	BIT(15)
+#define BCM6328_SERIAL_LED_SHIFT_DIR	BIT(16)
+#define BCM6328_LED_SHIFT_TEST		BIT(30)
+#define BCM6328_LED_TEST		BIT(31)
+
+#define BCM6328_LED_MODE_MASK		3
+#define BCM6328_LED_MODE_OFF		0
+#define BCM6328_LED_MODE_FAST		1
+#define BCM6328_LED_MODE_BLINK		2
+#define BCM6328_LED_MODE_ON		3
+#define BCM6328_LED_SHIFT(X)		((X) << 1)
+
+/**
+ * struct bcm6328_led - state container for bcm6328 based LEDs
+ * @cdev: LED class device for this LED
+ * @mem: memory resource
+ * @lock: memory lock
+ * @pin: LED pin number
+ * @blink_leds: blinking LEDs
+ * @blink_delay: blinking delay
+ * @active_low: LED is active low
+ */
+struct bcm6328_led {
+	struct led_classdev cdev;
+	void __iomem *mem;
+	spinlock_t *lock;
+	unsigned long pin;
+	unsigned long *blink_leds;
+	unsigned long *blink_delay;
+	bool active_low;
+};
+
+static void bcm6328_led_write(void __iomem *reg, unsigned long data)
+{
+	iowrite32be(data, reg);
+}
+
+static unsigned long bcm6328_led_read(void __iomem *reg)
+{
+	return ioread32be(reg);
+}
+
+/**
+ * LEDMode 64 bits / 24 LEDs
+ * bits [31:0] -> LEDs 8-23
+ * bits [47:32] -> LEDs 0-7
+ * bits [63:48] -> unused
+ */
+static unsigned long bcm6328_pin2shift(unsigned long pin)
+{
+	if (pin < 8)
+		return pin + 16; /* LEDs 0-7 (bits 47:32) */
+	else
+		return pin - 8; /* LEDs 8-23 (bits 31:0) */
+}
+
+static void bcm6328_led_mode(struct bcm6328_led *led, unsigned long value)
+{
+	void __iomem *mode;
+	unsigned long val, shift;
+
+	shift = bcm6328_pin2shift(led->pin);
+	if (shift / 16)
+		mode = led->mem + BCM6328_REG_MODE_HI;
+	else
+		mode = led->mem + BCM6328_REG_MODE_LO;
+
+	val = bcm6328_led_read(mode);
+	val &= ~(BCM6328_LED_MODE_MASK << BCM6328_LED_SHIFT(shift % 16));
+	val |= (value << BCM6328_LED_SHIFT(shift % 16));
+	bcm6328_led_write(mode, val);
+}
+
+static void bcm6328_led_set(struct led_classdev *led_cdev,
+			    enum led_brightness value)
+{
+	struct bcm6328_led *led =
+		container_of(led_cdev, struct bcm6328_led, cdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(led->lock, flags);
+	*(led->blink_leds) &= ~BIT(led->pin);
+	if ((led->active_low && value == LED_OFF) ||
+	    (!led->active_low && value != LED_OFF))
+		bcm6328_led_mode(led, BCM6328_LED_MODE_OFF);
+	else
+		bcm6328_led_mode(led, BCM6328_LED_MODE_ON);
+	spin_unlock_irqrestore(led->lock, flags);
+}
+
+static int bcm6328_blink_set(struct led_classdev *led_cdev,
+			     unsigned long *delay_on, unsigned long *delay_off)
+{
+	struct bcm6328_led *led =
+		container_of(led_cdev, struct bcm6328_led, cdev);
+	unsigned long delay, flags;
+
+	if (!*delay_on)
+		*delay_on = BCM6328_LED_DEF_DELAY;
+	if (!*delay_off)
+		*delay_off = BCM6328_LED_DEF_DELAY;
+
+	if (*delay_on != *delay_off) {
+		dev_dbg(led_cdev->dev,
+			"fallback to soft blinking (delay_on != delay_off)\n");
+		return -EINVAL;
+	}
+
+	delay = *delay_on / BCM6328_LED_INTERVAL_MS;
+	if (delay == 0)
+		delay = 1;
+	else if (delay > BCM6328_LED_INTV_MASK) {
+		dev_dbg(led_cdev->dev,
+			"fallback to soft blinking (delay > %ums)\n",
+			BCM6328_LED_INTV_MASK * BCM6328_LED_INTERVAL_MS);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(led->lock, flags);
+	if (*(led->blink_leds) == 0 ||
+	    *(led->blink_leds) == BIT(led->pin) ||
+	    *(led->blink_delay) == delay) {
+		unsigned long val;
+
+		*(led->blink_leds) |= BIT(led->pin);
+		*(led->blink_delay) = delay;
+
+		val = bcm6328_led_read(led->mem + BCM6328_REG_INIT);
+		val &= ~BCM6328_LED_FAST_INTV_MASK;
+		val |= (delay << BCM6328_LED_FAST_INTV_SHIFT);
+		bcm6328_led_write(led->mem + BCM6328_REG_INIT, val);
+
+		bcm6328_led_mode(led, BCM6328_LED_MODE_BLINK);
+
+		spin_unlock_irqrestore(led->lock, flags);
+	} else {
+		spin_unlock_irqrestore(led->lock, flags);
+		dev_dbg(led_cdev->dev,
+			"fallback to soft blinking (delay already set)\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int bcm6328_hwled(struct device *dev, struct device_node *nc, u32 reg,
+			 void __iomem *mem, spinlock_t *lock)
+{
+	int i, cnt;
+	unsigned long flags, val;
+
+	spin_lock_irqsave(lock, flags);
+	val = bcm6328_led_read(mem + BCM6328_REG_HWDIS);
+	val &= ~BIT(reg);
+	bcm6328_led_write(mem + BCM6328_REG_HWDIS, val);
+	spin_unlock_irqrestore(lock, flags);
+
+	/* Only LEDs 0-7 can be activity/link controlled */
+	if (reg >= 8)
+		return 0;
+
+	cnt = of_property_count_elems_of_size(nc, "brcm,link-signal-sources",
+					      sizeof(u32));
+	for (i = 0; i < cnt; i++) {
+		u32 sel;
+		void __iomem *addr;
+
+		if (reg < 4)
+			addr = mem + BCM6328_REG_LNKACTSEL_LO;
+		else
+			addr = mem + BCM6328_REG_LNKACTSEL_HI;
+
+		of_property_read_u32_index(nc, "brcm,link-signal-sources", i,
+					   &sel);
+
+		if (reg / 4 != sel / 4) {
+			dev_warn(dev, "invalid link signal source\n");
+			continue;
+		}
+
+		spin_lock_irqsave(lock, flags);
+		val = bcm6328_led_read(addr);
+		val |= (BIT(reg) << (((sel % 4) * 4) + 16));
+		bcm6328_led_write(addr, val);
+		spin_unlock_irqrestore(lock, flags);
+	}
+
+	cnt = of_property_count_elems_of_size(nc,
+					      "brcm,activity-signal-sources",
+					      sizeof(u32));
+	for (i = 0; i < cnt; i++) {
+		u32 sel;
+		void __iomem *addr;
+
+		if (reg < 4)
+			addr = mem + BCM6328_REG_LNKACTSEL_LO;
+		else
+			addr = mem + BCM6328_REG_LNKACTSEL_HI;
+
+		of_property_read_u32_index(nc, "brcm,activity-signal-sources",
+					   i, &sel);
+
+		if (reg / 4 != sel / 4) {
+			dev_warn(dev, "invalid activity signal source\n");
+			continue;
+		}
+
+		spin_lock_irqsave(lock, flags);
+		val = bcm6328_led_read(addr);
+		val |= (BIT(reg) << ((sel % 4) * 4));
+		bcm6328_led_write(addr, val);
+		spin_unlock_irqrestore(lock, flags);
+	}
+
+	return 0;
+}
+
+static int bcm6328_led(struct device *dev, struct device_node *nc, u32 reg,
+		       void __iomem *mem, spinlock_t *lock,
+		       unsigned long *blink_leds, unsigned long *blink_delay)
+{
+	struct bcm6328_led *led;
+	unsigned long flags;
+	const char *state;
+	int rc;
+
+	led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	led->pin = reg;
+	led->mem = mem;
+	led->lock = lock;
+	led->blink_leds = blink_leds;
+	led->blink_delay = blink_delay;
+
+	if (of_property_read_bool(nc, "active-low"))
+		led->active_low = true;
+
+	led->cdev.name = of_get_property(nc, "label", NULL) ? : nc->name;
+	led->cdev.default_trigger = of_get_property(nc,
+						    "linux,default-trigger",
+						    NULL);
+
+	if (!of_property_read_string(nc, "default-state", &state)) {
+		spin_lock_irqsave(lock, flags);
+		if (!strcmp(state, "on")) {
+			led->cdev.brightness = LED_FULL;
+			bcm6328_led_mode(led, BCM6328_LED_MODE_ON);
+		} else if (!strcmp(state, "keep")) {
+			void __iomem *mode;
+			unsigned long val, shift;
+
+			shift = bcm6328_pin2shift(led->pin);
+			if (shift / 16)
+				mode = mem + BCM6328_REG_MODE_HI;
+			else
+				mode = mem + BCM6328_REG_MODE_LO;
+
+			val = bcm6328_led_read(mode) >> (shift % 16);
+			val &= BCM6328_LED_MODE_MASK;
+			if (val == BCM6328_LED_MODE_ON)
+				led->cdev.brightness = LED_FULL;
+			else {
+				led->cdev.brightness = LED_OFF;
+				bcm6328_led_mode(led, BCM6328_LED_MODE_OFF);
+			}
+		} else {
+			led->cdev.brightness = LED_OFF;
+			bcm6328_led_mode(led, BCM6328_LED_MODE_OFF);
+		}
+		spin_unlock_irqrestore(lock, flags);
+	}
+
+	led->cdev.brightness_set = bcm6328_led_set;
+	led->cdev.blink_set = bcm6328_blink_set;
+
+	rc = led_classdev_register(dev, &led->cdev);
+	if (rc < 0)
+		return rc;
+
+	dev_dbg(dev, "registered LED %s\n", led->cdev.name);
+
+	return 0;
+}
+
+static int bcm6328_leds_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *child;
+	struct resource *mem_r;
+	void __iomem *mem;
+	spinlock_t *lock;
+	unsigned long val, *blink_leds, *blink_delay;
+
+	mem_r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem_r)
+		return -EINVAL;
+
+	mem = devm_ioremap_resource(dev, mem_r);
+	if (IS_ERR(mem))
+		return PTR_ERR(mem);
+
+	lock = devm_kzalloc(dev, sizeof(*lock), GFP_KERNEL);
+	if (!lock)
+		return -ENOMEM;
+
+	blink_leds = devm_kzalloc(dev, sizeof(*blink_leds), GFP_KERNEL);
+	if (!blink_leds)
+		return -ENOMEM;
+
+	blink_delay = devm_kzalloc(dev, sizeof(*blink_delay), GFP_KERNEL);
+	if (!blink_delay)
+		return -ENOMEM;
+
+	spin_lock_init(lock);
+
+	bcm6328_led_write(mem + BCM6328_REG_HWDIS, ~0);
+	bcm6328_led_write(mem + BCM6328_REG_LNKACTSEL_HI, 0);
+	bcm6328_led_write(mem + BCM6328_REG_LNKACTSEL_LO, 0);
+
+	val = bcm6328_led_read(mem + BCM6328_REG_INIT);
+	val &= ~BCM6328_SERIAL_LED_EN;
+	if (of_property_read_bool(np, "brcm,serial-leds"))
+		val |= BCM6328_SERIAL_LED_EN;
+	bcm6328_led_write(mem + BCM6328_REG_INIT, val);
+
+	for_each_available_child_of_node(np, child) {
+		int rc;
+		u32 reg;
+
+		if (of_property_read_u32(child, "reg", &reg))
+			continue;
+
+		if (reg >= BCM6328_LED_MAX_COUNT) {
+			dev_err(dev, "invalid LED (>= %d)\n",
+				BCM6328_LED_MAX_COUNT);
+			continue;
+		}
+
+		if (of_property_read_bool(child, "brcm,hardware-controlled"))
+			rc = bcm6328_hwled(dev, child, reg, mem, lock);
+		else
+			rc = bcm6328_led(dev, child, reg, mem, lock,
+					 blink_leds, blink_delay);
+
+		if (rc < 0)
+			return rc;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id bcm6328_leds_of_match[] = {
+	{ .compatible = "brcm,bcm6328-leds", },
+	{ },
+};
+
+static struct platform_driver bcm6328_leds_driver = {
+	.probe = bcm6328_leds_probe,
+	.driver = {
+		.name = "leds-bcm6328",
+		.of_match_table = bcm6328_leds_of_match,
+	},
+};
+
+module_platform_driver(bcm6328_leds_driver);
+
+MODULE_AUTHOR("Álvaro Fernández Rojas <noltari@gmail.com>");
+MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
+MODULE_DESCRIPTION("LED driver for BCM6328 controllers");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:leds-bcm6328");
diff --git a/drivers/leds/leds-bcm6358.c b/drivers/leds/leds-bcm6358.c
new file mode 100644
index 0000000..21f9693
--- /dev/null
+++ b/drivers/leds/leds-bcm6358.c
@@ -0,0 +1,243 @@
+/*
+ * Driver for BCM6358 memory-mapped LEDs, based on leds-syscon.c
+ *
+ * Copyright 2015 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#define BCM6358_REG_MODE		0x0
+#define BCM6358_REG_CTRL		0x4
+
+#define BCM6358_SLED_CLKDIV_MASK	3
+#define BCM6358_SLED_CLKDIV_1		0
+#define BCM6358_SLED_CLKDIV_2		1
+#define BCM6358_SLED_CLKDIV_4		2
+#define BCM6358_SLED_CLKDIV_8		3
+
+#define BCM6358_SLED_POLARITY		BIT(2)
+#define BCM6358_SLED_BUSY		BIT(3)
+
+#define BCM6358_SLED_MAX_COUNT		32
+#define BCM6358_SLED_WAIT		100
+
+/**
+ * struct bcm6358_led - state container for bcm6358 based LEDs
+ * @cdev: LED class device for this LED
+ * @mem: memory resource
+ * @lock: memory lock
+ * @pin: LED pin number
+ * @active_low: LED is active low
+ */
+struct bcm6358_led {
+	struct led_classdev cdev;
+	void __iomem *mem;
+	spinlock_t *lock;
+	unsigned long pin;
+	bool active_low;
+};
+
+static void bcm6358_led_write(void __iomem *reg, unsigned long data)
+{
+	iowrite32be(data, reg);
+}
+
+static unsigned long bcm6358_led_read(void __iomem *reg)
+{
+	return ioread32be(reg);
+}
+
+static unsigned long bcm6358_led_busy(void __iomem *mem)
+{
+	unsigned long val;
+
+	while ((val = bcm6358_led_read(mem + BCM6358_REG_CTRL)) &
+		BCM6358_SLED_BUSY)
+		udelay(BCM6358_SLED_WAIT);
+
+	return val;
+}
+
+static void bcm6358_led_mode(struct bcm6358_led *led, unsigned long value)
+{
+	unsigned long val;
+
+	bcm6358_led_busy(led->mem);
+
+	val = bcm6358_led_read(led->mem + BCM6358_REG_MODE);
+	if ((led->active_low && value == LED_OFF) ||
+	    (!led->active_low && value != LED_OFF))
+		val |= BIT(led->pin);
+	else
+		val &= ~(BIT(led->pin));
+	bcm6358_led_write(led->mem + BCM6358_REG_MODE, val);
+}
+
+static void bcm6358_led_set(struct led_classdev *led_cdev,
+			    enum led_brightness value)
+{
+	struct bcm6358_led *led =
+		container_of(led_cdev, struct bcm6358_led, cdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(led->lock, flags);
+	bcm6358_led_mode(led, value);
+	spin_unlock_irqrestore(led->lock, flags);
+}
+
+static int bcm6358_led(struct device *dev, struct device_node *nc, u32 reg,
+		       void __iomem *mem, spinlock_t *lock)
+{
+	struct bcm6358_led *led;
+	unsigned long flags;
+	const char *state;
+	int rc;
+
+	led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	led->pin = reg;
+	led->mem = mem;
+	led->lock = lock;
+
+	if (of_property_read_bool(nc, "active-low"))
+		led->active_low = true;
+
+	led->cdev.name = of_get_property(nc, "label", NULL) ? : nc->name;
+	led->cdev.default_trigger = of_get_property(nc,
+						    "linux,default-trigger",
+						    NULL);
+
+	spin_lock_irqsave(lock, flags);
+	if (!of_property_read_string(nc, "default-state", &state)) {
+		if (!strcmp(state, "on")) {
+			led->cdev.brightness = LED_FULL;
+		} else if (!strcmp(state, "keep")) {
+			unsigned long val;
+
+			bcm6358_led_busy(led->mem);
+
+			val = bcm6358_led_read(led->mem + BCM6358_REG_MODE);
+			val &= BIT(led->pin);
+			if ((led->active_low && !val) ||
+			    (!led->active_low && val))
+				led->cdev.brightness = LED_FULL;
+			else
+				led->cdev.brightness = LED_OFF;
+		} else {
+			led->cdev.brightness = LED_OFF;
+		}
+	} else {
+		led->cdev.brightness = LED_OFF;
+	}
+	bcm6358_led_mode(led, led->cdev.brightness);
+	spin_unlock_irqrestore(lock, flags);
+
+	led->cdev.brightness_set = bcm6358_led_set;
+
+	rc = led_classdev_register(dev, &led->cdev);
+	if (rc < 0)
+		return rc;
+
+	dev_dbg(dev, "registered LED %s\n", led->cdev.name);
+
+	return 0;
+}
+
+static int bcm6358_leds_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *child;
+	struct resource *mem_r;
+	void __iomem *mem;
+	spinlock_t *lock; /* memory lock */
+	unsigned long val;
+	u32 clk_div;
+
+	mem_r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem_r)
+		return -EINVAL;
+
+	mem = devm_ioremap_resource(dev, mem_r);
+	if (IS_ERR(mem))
+		return PTR_ERR(mem);
+
+	lock = devm_kzalloc(dev, sizeof(*lock), GFP_KERNEL);
+	if (!lock)
+		return -ENOMEM;
+
+	spin_lock_init(lock);
+
+	val = bcm6358_led_busy(mem);
+	val &= ~(BCM6358_SLED_POLARITY | BCM6358_SLED_CLKDIV_MASK);
+	if (of_property_read_bool(np, "brcm,clk-dat-low"))
+		val |= BCM6358_SLED_POLARITY;
+	of_property_read_u32(np, "brcm,clk-div", &clk_div);
+	switch (clk_div) {
+	case 8:
+		val |= BCM6358_SLED_CLKDIV_8;
+		break;
+	case 4:
+		val |= BCM6358_SLED_CLKDIV_4;
+		break;
+	case 2:
+		val |= BCM6358_SLED_CLKDIV_2;
+		break;
+	default:
+		val |= BCM6358_SLED_CLKDIV_1;
+		break;
+	}
+	bcm6358_led_write(mem + BCM6358_REG_CTRL, val);
+
+	for_each_available_child_of_node(np, child) {
+		int rc;
+		u32 reg;
+
+		if (of_property_read_u32(child, "reg", &reg))
+			continue;
+
+		if (reg >= BCM6358_SLED_MAX_COUNT) {
+			dev_err(dev, "invalid LED (%u >= %d)\n", reg,
+				BCM6358_SLED_MAX_COUNT);
+			continue;
+		}
+
+		rc = bcm6358_led(dev, child, reg, mem, lock);
+		if (rc < 0)
+			return rc;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id bcm6358_leds_of_match[] = {
+	{ .compatible = "brcm,bcm6358-leds", },
+	{ },
+};
+
+static struct platform_driver bcm6358_leds_driver = {
+	.probe = bcm6358_leds_probe,
+	.driver = {
+		.name = "leds-bcm6358",
+		.of_match_table = bcm6358_leds_of_match,
+	},
+};
+
+module_platform_driver(bcm6358_leds_driver);
+
+MODULE_AUTHOR("Álvaro Fernández Rojas <noltari@gmail.com>");
+MODULE_DESCRIPTION("LED driver for BCM6358 controllers");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:leds-bcm6358");
diff --git a/drivers/leds/leds-cobalt-raq.c b/drivers/leds/leds-cobalt-raq.c
index 06dbe18..b316df4 100644
--- a/drivers/leds/leds-cobalt-raq.c
+++ b/drivers/leds/leds-cobalt-raq.c
@@ -108,20 +108,8 @@ err_null:
 	return retval;
 }
 
-static int cobalt_raq_led_remove(struct platform_device *pdev)
-{
-	led_classdev_unregister(&raq_power_off_led);
-	led_classdev_unregister(&raq_web_led);
-
-	if (led_port)
-		led_port = NULL;
-
-	return 0;
-}
-
 static struct platform_driver cobalt_raq_led_driver = {
 	.probe	= cobalt_raq_led_probe,
-	.remove	= cobalt_raq_led_remove,
 	.driver = {
 		.name	= "cobalt-raq-leds",
 	},
@@ -131,5 +119,4 @@ static int __init cobalt_raq_led_init(void)
 {
 	return platform_driver_register(&cobalt_raq_led_driver);
 }
-
-module_init(cobalt_raq_led_init);
+device_initcall(cobalt_raq_led_init);
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index d2d54d6..af1876a 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/leds.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/slab.h>
@@ -198,8 +199,10 @@ static struct gpio_leds_priv *gpio_leds_create(struct platform_device *pdev)
 		} else {
 			if (IS_ENABLED(CONFIG_OF) && !led.name && np)
 				led.name = np->name;
-			if (!led.name)
-				return ERR_PTR(-EINVAL);
+			if (!led.name) {
+				ret = -EINVAL;
+				goto err;
+			}
 		}
 		fwnode_property_read_string(child, "linux,default-trigger",
 					    &led.default_trigger);
@@ -217,18 +220,19 @@ static struct gpio_leds_priv *gpio_leds_create(struct platform_device *pdev)
 		if (fwnode_property_present(child, "retain-state-suspended"))
 			led.retain_state_suspended = 1;
 
-		ret = create_gpio_led(&led, &priv->leds[priv->num_leds++],
+		ret = create_gpio_led(&led, &priv->leds[priv->num_leds],
 				      dev, NULL);
 		if (ret < 0) {
 			fwnode_handle_put(child);
 			goto err;
 		}
+		priv->num_leds++;
 	}
 
 	return priv;
 
 err:
-	for (count = priv->num_leds - 2; count >= 0; count--)
+	for (count = priv->num_leds - 1; count >= 0; count--)
 		delete_gpio_led(&priv->leds[count]);
 	return ERR_PTR(ret);
 }
diff --git a/drivers/leds/leds-ktd2692.c b/drivers/leds/leds-ktd2692.c
new file mode 100644
index 0000000..2ae8c4d
--- /dev/null
+++ b/drivers/leds/leds-ktd2692.c
@@ -0,0 +1,443 @@
+/*
+ * LED driver : leds-ktd2692.c
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Ingi Kim <ingi2.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/led-class-flash.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/workqueue.h>
+
+/* Value related the movie mode */
+#define KTD2692_MOVIE_MODE_CURRENT_LEVELS	16
+#define KTD2692_MM_TO_FL_RATIO(x)		((x) / 3)
+#define KTD2962_MM_MIN_CURR_THRESHOLD_SCALE	8
+
+/* Value related the flash mode */
+#define KTD2692_FLASH_MODE_TIMEOUT_LEVELS	8
+#define KTD2692_FLASH_MODE_TIMEOUT_DISABLE	0
+#define KTD2692_FLASH_MODE_CURR_PERCENT(x)	(((x) * 16) / 100)
+
+/* Macro for getting offset of flash timeout */
+#define GET_TIMEOUT_OFFSET(timeout, step)	((timeout) / (step))
+
+/* Base register address */
+#define KTD2692_REG_LVP_BASE			0x00
+#define KTD2692_REG_FLASH_TIMEOUT_BASE		0x20
+#define KTD2692_REG_MM_MIN_CURR_THRESHOLD_BASE	0x40
+#define KTD2692_REG_MOVIE_CURRENT_BASE		0x60
+#define KTD2692_REG_FLASH_CURRENT_BASE		0x80
+#define KTD2692_REG_MODE_BASE			0xA0
+
+/* Set bit coding time for expresswire interface */
+#define KTD2692_TIME_RESET_US			700
+#define KTD2692_TIME_DATA_START_TIME_US		10
+#define KTD2692_TIME_HIGH_END_OF_DATA_US	350
+#define KTD2692_TIME_LOW_END_OF_DATA_US		10
+#define KTD2692_TIME_SHORT_BITSET_US		4
+#define KTD2692_TIME_LONG_BITSET_US		12
+
+/* KTD2692 default length of name */
+#define KTD2692_NAME_LENGTH			20
+
+enum ktd2692_bitset {
+	KTD2692_LOW = 0,
+	KTD2692_HIGH,
+};
+
+/* Movie / Flash Mode Control */
+enum ktd2692_led_mode {
+	KTD2692_MODE_DISABLE = 0,	/* default */
+	KTD2692_MODE_MOVIE,
+	KTD2692_MODE_FLASH,
+};
+
+struct ktd2692_led_config_data {
+	/* maximum LED current in movie mode */
+	u32 movie_max_microamp;
+	/* maximum LED current in flash mode */
+	u32 flash_max_microamp;
+	/* maximum flash timeout */
+	u32 flash_max_timeout;
+	/* max LED brightness level */
+	enum led_brightness max_brightness;
+};
+
+struct ktd2692_context {
+	/* Related LED Flash class device */
+	struct led_classdev_flash fled_cdev;
+
+	/* secures access to the device */
+	struct mutex lock;
+	struct regulator *regulator;
+	struct work_struct work_brightness_set;
+
+	struct gpio_desc *aux_gpio;
+	struct gpio_desc *ctrl_gpio;
+
+	enum ktd2692_led_mode mode;
+	enum led_brightness torch_brightness;
+};
+
+static struct ktd2692_context *fled_cdev_to_led(
+				struct led_classdev_flash *fled_cdev)
+{
+	return container_of(fled_cdev, struct ktd2692_context, fled_cdev);
+}
+
+static void ktd2692_expresswire_start(struct ktd2692_context *led)
+{
+	gpiod_direction_output(led->ctrl_gpio, KTD2692_HIGH);
+	udelay(KTD2692_TIME_DATA_START_TIME_US);
+}
+
+static void ktd2692_expresswire_reset(struct ktd2692_context *led)
+{
+	gpiod_direction_output(led->ctrl_gpio, KTD2692_LOW);
+	udelay(KTD2692_TIME_RESET_US);
+}
+
+static void ktd2692_expresswire_end(struct ktd2692_context *led)
+{
+	gpiod_direction_output(led->ctrl_gpio, KTD2692_LOW);
+	udelay(KTD2692_TIME_LOW_END_OF_DATA_US);
+	gpiod_direction_output(led->ctrl_gpio, KTD2692_HIGH);
+	udelay(KTD2692_TIME_HIGH_END_OF_DATA_US);
+}
+
+static void ktd2692_expresswire_set_bit(struct ktd2692_context *led, bool bit)
+{
+	/*
+	 * The Low Bit(0) and High Bit(1) is based on a time detection
+	 * algorithm between time low and time high
+	 * Time_(L_LB) : Low time of the Low Bit(0)
+	 * Time_(H_LB) : High time of the LOW Bit(0)
+	 * Time_(L_HB) : Low time of the High Bit(1)
+	 * Time_(H_HB) : High time of the High Bit(1)
+	 *
+	 * It can be simplified to:
+	 * Low Bit(0) : 2 * Time_(H_LB) < Time_(L_LB)
+	 * High Bit(1) : 2 * Time_(L_HB) < Time_(H_HB)
+	 * HIGH  ___           ____    _..     _________    ___
+	 *          |_________|    |_..  |____|         |__|
+	 * LOW        <L_LB>  <H_LB>     <L_HB>  <H_HB>
+	 *          [  Low Bit (0) ]     [  High Bit(1) ]
+	 */
+	if (bit) {
+		gpiod_direction_output(led->ctrl_gpio, KTD2692_LOW);
+		udelay(KTD2692_TIME_SHORT_BITSET_US);
+		gpiod_direction_output(led->ctrl_gpio, KTD2692_HIGH);
+		udelay(KTD2692_TIME_LONG_BITSET_US);
+	} else {
+		gpiod_direction_output(led->ctrl_gpio, KTD2692_LOW);
+		udelay(KTD2692_TIME_LONG_BITSET_US);
+		gpiod_direction_output(led->ctrl_gpio, KTD2692_HIGH);
+		udelay(KTD2692_TIME_SHORT_BITSET_US);
+	}
+}
+
+static void ktd2692_expresswire_write(struct ktd2692_context *led, u8 value)
+{
+	int i;
+
+	ktd2692_expresswire_start(led);
+	for (i = 7; i >= 0; i--)
+		ktd2692_expresswire_set_bit(led, value & BIT(i));
+	ktd2692_expresswire_end(led);
+}
+
+static void ktd2692_brightness_set(struct ktd2692_context *led,
+				   enum led_brightness brightness)
+{
+	mutex_lock(&led->lock);
+
+	if (brightness == LED_OFF) {
+		led->mode = KTD2692_MODE_DISABLE;
+		gpiod_direction_output(led->aux_gpio, KTD2692_LOW);
+	} else {
+		ktd2692_expresswire_write(led, brightness |
+					KTD2692_REG_MOVIE_CURRENT_BASE);
+		led->mode = KTD2692_MODE_MOVIE;
+	}
+
+	ktd2692_expresswire_write(led, led->mode | KTD2692_REG_MODE_BASE);
+	mutex_unlock(&led->lock);
+}
+
+static void ktd2692_brightness_set_work(struct work_struct *work)
+{
+	struct ktd2692_context *led =
+		container_of(work, struct ktd2692_context, work_brightness_set);
+
+	ktd2692_brightness_set(led, led->torch_brightness);
+}
+
+static void ktd2692_led_brightness_set(struct led_classdev *led_cdev,
+				       enum led_brightness brightness)
+{
+	struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+	struct ktd2692_context *led = fled_cdev_to_led(fled_cdev);
+
+	led->torch_brightness = brightness;
+	schedule_work(&led->work_brightness_set);
+}
+
+static int ktd2692_led_brightness_set_sync(struct led_classdev *led_cdev,
+					   enum led_brightness brightness)
+{
+	struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+	struct ktd2692_context *led = fled_cdev_to_led(fled_cdev);
+
+	ktd2692_brightness_set(led, brightness);
+
+	return 0;
+}
+
+static int ktd2692_led_flash_strobe_set(struct led_classdev_flash *fled_cdev,
+					bool state)
+{
+	struct ktd2692_context *led = fled_cdev_to_led(fled_cdev);
+	struct led_flash_setting *timeout = &fled_cdev->timeout;
+	u32 flash_tm_reg;
+
+	mutex_lock(&led->lock);
+
+	if (state) {
+		flash_tm_reg = GET_TIMEOUT_OFFSET(timeout->val, timeout->step);
+		ktd2692_expresswire_write(led, flash_tm_reg
+				| KTD2692_REG_FLASH_TIMEOUT_BASE);
+
+		led->mode = KTD2692_MODE_FLASH;
+		gpiod_direction_output(led->aux_gpio, KTD2692_HIGH);
+	} else {
+		led->mode = KTD2692_MODE_DISABLE;
+		gpiod_direction_output(led->aux_gpio, KTD2692_LOW);
+	}
+
+	ktd2692_expresswire_write(led, led->mode | KTD2692_REG_MODE_BASE);
+
+	fled_cdev->led_cdev.brightness = LED_OFF;
+	led->mode = KTD2692_MODE_DISABLE;
+
+	mutex_unlock(&led->lock);
+
+	return 0;
+}
+
+static int ktd2692_led_flash_timeout_set(struct led_classdev_flash *fled_cdev,
+					 u32 timeout)
+{
+	return 0;
+}
+
+static void ktd2692_init_movie_current_max(struct ktd2692_led_config_data *cfg)
+{
+	u32 offset, step;
+	u32 movie_current_microamp;
+
+	offset = KTD2692_MOVIE_MODE_CURRENT_LEVELS;
+	step = KTD2692_MM_TO_FL_RATIO(cfg->flash_max_microamp)
+		/ KTD2692_MOVIE_MODE_CURRENT_LEVELS;
+
+	do {
+		movie_current_microamp = step * offset;
+		offset--;
+	} while ((movie_current_microamp > cfg->movie_max_microamp) &&
+		(offset > 0));
+
+	cfg->max_brightness = offset;
+}
+
+static void ktd2692_init_flash_timeout(struct led_classdev_flash *fled_cdev,
+				       struct ktd2692_led_config_data *cfg)
+{
+	struct led_flash_setting *setting;
+
+	setting = &fled_cdev->timeout;
+	setting->min = KTD2692_FLASH_MODE_TIMEOUT_DISABLE;
+	setting->max = cfg->flash_max_timeout;
+	setting->step = cfg->flash_max_timeout
+			/ (KTD2692_FLASH_MODE_TIMEOUT_LEVELS - 1);
+	setting->val = cfg->flash_max_timeout;
+}
+
+static void ktd2692_setup(struct ktd2692_context *led)
+{
+	led->mode = KTD2692_MODE_DISABLE;
+	ktd2692_expresswire_reset(led);
+	gpiod_direction_output(led->aux_gpio, KTD2692_LOW);
+
+	ktd2692_expresswire_write(led, (KTD2962_MM_MIN_CURR_THRESHOLD_SCALE - 1)
+				 | KTD2692_REG_MM_MIN_CURR_THRESHOLD_BASE);
+	ktd2692_expresswire_write(led, KTD2692_FLASH_MODE_CURR_PERCENT(45)
+				 | KTD2692_REG_FLASH_CURRENT_BASE);
+}
+
+static int ktd2692_parse_dt(struct ktd2692_context *led, struct device *dev,
+			    struct ktd2692_led_config_data *cfg)
+{
+	struct device_node *np = dev->of_node;
+	struct device_node *child_node;
+	int ret;
+
+	if (!dev->of_node)
+		return -ENXIO;
+
+	led->ctrl_gpio = devm_gpiod_get(dev, "ctrl", GPIOD_ASIS);
+	if (IS_ERR(led->ctrl_gpio)) {
+		ret = PTR_ERR(led->ctrl_gpio);
+		dev_err(dev, "cannot get ctrl-gpios %d\n", ret);
+		return ret;
+	}
+
+	led->aux_gpio = devm_gpiod_get(dev, "aux", GPIOD_ASIS);
+	if (IS_ERR(led->aux_gpio)) {
+		ret = PTR_ERR(led->aux_gpio);
+		dev_err(dev, "cannot get aux-gpios %d\n", ret);
+		return ret;
+	}
+
+	led->regulator = devm_regulator_get(dev, "vin");
+	if (IS_ERR(led->regulator))
+		led->regulator = NULL;
+
+	if (led->regulator) {
+		ret = regulator_enable(led->regulator);
+		if (ret)
+			dev_err(dev, "Failed to enable supply: %d\n", ret);
+	}
+
+	child_node = of_get_next_available_child(np, NULL);
+	if (!child_node) {
+		dev_err(dev, "No DT child node found for connected LED.\n");
+		return -EINVAL;
+	}
+
+	led->fled_cdev.led_cdev.name =
+		of_get_property(child_node, "label", NULL) ? : child_node->name;
+
+	ret = of_property_read_u32(child_node, "led-max-microamp",
+				   &cfg->movie_max_microamp);
+	if (ret) {
+		dev_err(dev, "failed to parse led-max-microamp\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(child_node, "flash-max-microamp",
+				   &cfg->flash_max_microamp);
+	if (ret) {
+		dev_err(dev, "failed to parse flash-max-microamp\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(child_node, "flash-max-timeout-us",
+				   &cfg->flash_max_timeout);
+	if (ret)
+		dev_err(dev, "failed to parse flash-max-timeout-us\n");
+
+	of_node_put(child_node);
+	return ret;
+}
+
+static const struct led_flash_ops flash_ops = {
+	.strobe_set = ktd2692_led_flash_strobe_set,
+	.timeout_set = ktd2692_led_flash_timeout_set,
+};
+
+static int ktd2692_probe(struct platform_device *pdev)
+{
+	struct ktd2692_context *led;
+	struct led_classdev *led_cdev;
+	struct led_classdev_flash *fled_cdev;
+	struct ktd2692_led_config_data led_cfg;
+	int ret;
+
+	led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	fled_cdev = &led->fled_cdev;
+	led_cdev = &fled_cdev->led_cdev;
+
+	ret = ktd2692_parse_dt(led, &pdev->dev, &led_cfg);
+	if (ret)
+		return ret;
+
+	ktd2692_init_flash_timeout(fled_cdev, &led_cfg);
+	ktd2692_init_movie_current_max(&led_cfg);
+
+	fled_cdev->ops = &flash_ops;
+
+	led_cdev->max_brightness = led_cfg.max_brightness;
+	led_cdev->brightness_set = ktd2692_led_brightness_set;
+	led_cdev->brightness_set_sync = ktd2692_led_brightness_set_sync;
+	led_cdev->flags |= LED_CORE_SUSPENDRESUME | LED_DEV_CAP_FLASH;
+
+	mutex_init(&led->lock);
+	INIT_WORK(&led->work_brightness_set, ktd2692_brightness_set_work);
+
+	platform_set_drvdata(pdev, led);
+
+	ret = led_classdev_flash_register(&pdev->dev, fled_cdev);
+	if (ret) {
+		dev_err(&pdev->dev, "can't register LED %s\n", led_cdev->name);
+		mutex_destroy(&led->lock);
+		return ret;
+	}
+
+	ktd2692_setup(led);
+
+	return 0;
+}
+
+static int ktd2692_remove(struct platform_device *pdev)
+{
+	struct ktd2692_context *led = platform_get_drvdata(pdev);
+	int ret;
+
+	led_classdev_flash_unregister(&led->fled_cdev);
+	cancel_work_sync(&led->work_brightness_set);
+
+	if (led->regulator) {
+		ret = regulator_disable(led->regulator);
+		if (ret)
+			dev_err(&pdev->dev,
+				"Failed to disable supply: %d\n", ret);
+	}
+
+	mutex_destroy(&led->lock);
+
+	return 0;
+}
+
+static const struct of_device_id ktd2692_match[] = {
+	{ .compatible = "kinetic,ktd2692", },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver ktd2692_driver = {
+	.driver = {
+		.name  = "ktd2692",
+		.of_match_table = ktd2692_match,
+	},
+	.probe  = ktd2692_probe,
+	.remove = ktd2692_remove,
+};
+
+module_platform_driver(ktd2692_driver);
+
+MODULE_AUTHOR("Ingi Kim <ingi2.kim@samsung.com>");
+MODULE_DESCRIPTION("Kinetic KTD2692 LED driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index 9e1716f..584dbbc 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -50,6 +50,7 @@
 #define LP5523_REG_OP_MODE		0x01
 #define LP5523_REG_ENABLE_LEDS_MSB	0x04
 #define LP5523_REG_ENABLE_LEDS_LSB	0x05
+#define LP5523_REG_LED_CTRL_BASE	0x06
 #define LP5523_REG_LED_PWM_BASE		0x16
 #define LP5523_REG_LED_CURRENT_BASE	0x26
 #define LP5523_REG_CONFIG		0x36
@@ -57,6 +58,7 @@
 #define LP5523_REG_RESET		0x3D
 #define LP5523_REG_LED_TEST_CTRL	0x41
 #define LP5523_REG_LED_TEST_ADC		0x42
+#define LP5523_REG_MASTER_FADER_BASE	0x48
 #define LP5523_REG_CH1_PROG_START	0x4C
 #define LP5523_REG_CH2_PROG_START	0x4D
 #define LP5523_REG_CH3_PROG_START	0x4E
@@ -78,6 +80,9 @@
 #define LP5523_EXT_CLK_USED		0x08
 #define LP5523_ENG_STATUS_MASK		0x07
 
+#define LP5523_FADER_MAPPING_MASK	0xC0
+#define LP5523_FADER_MAPPING_SHIFT	6
+
 /* Memory Page Selection */
 #define LP5523_PAGE_ENG1		0
 #define LP5523_PAGE_ENG2		1
@@ -666,6 +671,137 @@ release_lock:
 	return pos;
 }
 
+#define show_fader(nr)						\
+static ssize_t show_master_fader##nr(struct device *dev,	\
+			    struct device_attribute *attr,	\
+			    char *buf)				\
+{								\
+	return show_master_fader(dev, attr, buf, nr);		\
+}
+
+#define store_fader(nr)						\
+static ssize_t store_master_fader##nr(struct device *dev,	\
+			     struct device_attribute *attr,	\
+			     const char *buf, size_t len)	\
+{								\
+	return store_master_fader(dev, attr, buf, len, nr);	\
+}
+
+static ssize_t show_master_fader(struct device *dev,
+				 struct device_attribute *attr,
+				 char *buf, int nr)
+{
+	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+	struct lp55xx_chip *chip = led->chip;
+	int ret;
+	u8 val;
+
+	mutex_lock(&chip->lock);
+	ret = lp55xx_read(chip, LP5523_REG_MASTER_FADER_BASE + nr - 1, &val);
+	mutex_unlock(&chip->lock);
+
+	if (ret == 0)
+		ret = sprintf(buf, "%u\n", val);
+
+	return ret;
+}
+show_fader(1)
+show_fader(2)
+show_fader(3)
+
+static ssize_t store_master_fader(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t len, int nr)
+{
+	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+	struct lp55xx_chip *chip = led->chip;
+	int ret;
+	unsigned long val;
+
+	if (kstrtoul(buf, 0, &val))
+		return -EINVAL;
+
+	if (val > 0xff)
+		return -EINVAL;
+
+	mutex_lock(&chip->lock);
+	ret = lp55xx_write(chip, LP5523_REG_MASTER_FADER_BASE + nr - 1,
+			   (u8)val);
+	mutex_unlock(&chip->lock);
+
+	if (ret == 0)
+		ret = len;
+
+	return ret;
+}
+store_fader(1)
+store_fader(2)
+store_fader(3)
+
+static ssize_t show_master_fader_leds(struct device *dev,
+				      struct device_attribute *attr,
+				      char *buf)
+{
+	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+	struct lp55xx_chip *chip = led->chip;
+	int i, ret, pos = 0;
+	u8 val;
+
+	mutex_lock(&chip->lock);
+
+	for (i = 0; i < LP5523_MAX_LEDS; i++) {
+		ret = lp55xx_read(chip, LP5523_REG_LED_CTRL_BASE + i, &val);
+		if (ret)
+			goto leave;
+
+		val = (val & LP5523_FADER_MAPPING_MASK)
+			>> LP5523_FADER_MAPPING_SHIFT;
+		if (val > 3) {
+			ret = -EINVAL;
+			goto leave;
+		}
+		buf[pos++] = val + '0';
+	}
+	buf[pos++] = '\n';
+	ret = pos;
+leave:
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static ssize_t store_master_fader_leds(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t len)
+{
+	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
+	struct lp55xx_chip *chip = led->chip;
+	int i, n, ret;
+	u8 val;
+
+	n = min_t(int, len, LP5523_MAX_LEDS);
+
+	mutex_lock(&chip->lock);
+
+	for (i = 0; i < n; i++) {
+		if (buf[i] >= '0' && buf[i] <= '3') {
+			val = (buf[i] - '0') << LP5523_FADER_MAPPING_SHIFT;
+			ret = lp55xx_update_bits(chip,
+						 LP5523_REG_LED_CTRL_BASE + i,
+						 LP5523_FADER_MAPPING_MASK,
+						 val);
+			if (ret)
+				goto leave;
+		} else {
+			ret = -EINVAL;
+			goto leave;
+		}
+	}
+	ret = len;
+leave:
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
 static void lp5523_led_brightness_work(struct work_struct *work)
 {
 	struct lp55xx_led *led = container_of(work, struct lp55xx_led,
@@ -688,6 +824,14 @@ static LP55XX_DEV_ATTR_WO(engine1_load, store_engine1_load);
 static LP55XX_DEV_ATTR_WO(engine2_load, store_engine2_load);
 static LP55XX_DEV_ATTR_WO(engine3_load, store_engine3_load);
 static LP55XX_DEV_ATTR_RO(selftest, lp5523_selftest);
+static LP55XX_DEV_ATTR_RW(master_fader1, show_master_fader1,
+			  store_master_fader1);
+static LP55XX_DEV_ATTR_RW(master_fader2, show_master_fader2,
+			  store_master_fader2);
+static LP55XX_DEV_ATTR_RW(master_fader3, show_master_fader3,
+			  store_master_fader3);
+static LP55XX_DEV_ATTR_RW(master_fader_leds, show_master_fader_leds,
+			  store_master_fader_leds);
 
 static struct attribute *lp5523_attributes[] = {
 	&dev_attr_engine1_mode.attr,
@@ -700,6 +844,10 @@ static struct attribute *lp5523_attributes[] = {
 	&dev_attr_engine2_leds.attr,
 	&dev_attr_engine3_leds.attr,
 	&dev_attr_selftest.attr,
+	&dev_attr_master_fader1.attr,
+	&dev_attr_master_fader2.attr,
+	&dev_attr_master_fader3.attr,
+	&dev_attr_master_fader_leds.attr,
 	NULL,
 };
 
diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c
index 77c26bc..96d51e9 100644
--- a/drivers/leds/leds-lp55xx-common.c
+++ b/drivers/leds/leds-lp55xx-common.c
@@ -223,7 +223,7 @@ static int lp55xx_request_firmware(struct lp55xx_chip *chip)
 	const char *name = chip->cl->name;
 	struct device *dev = &chip->cl->dev;
 
-	return request_firmware_nowait(THIS_MODULE, true, name, dev,
+	return request_firmware_nowait(THIS_MODULE, false, name, dev,
 				GFP_KERNEL, chip, lp55xx_firmware_loaded);
 }
 
diff --git a/drivers/leds/leds-max77693.c b/drivers/leds/leds-max77693.c
new file mode 100644
index 0000000..b8b0eec
--- /dev/null
+++ b/drivers/leds/leds-max77693.c
@@ -0,0 +1,1097 @@
+/*
+ * LED Flash class driver for the flash cell of max77693 mfd.
+ *
+ *	Copyright (C) 2015, Samsung Electronics Co., Ltd.
+ *
+ *	Authors: Jacek Anaszewski <j.anaszewski@samsung.com>
+ *		 Andrzej Hajda <a.hajda@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/led-class-flash.h>
+#include <linux/mfd/max77693.h>
+#include <linux/mfd/max77693-private.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <media/v4l2-flash-led-class.h>
+
+#define MODE_OFF		0
+#define MODE_FLASH(a)		(1 << (a))
+#define MODE_TORCH(a)		(1 << (2 + (a)))
+#define MODE_FLASH_EXTERNAL(a)	(1 << (4 + (a)))
+
+#define MODE_FLASH_MASK		(MODE_FLASH(FLED1) | MODE_FLASH(FLED2) | \
+				 MODE_FLASH_EXTERNAL(FLED1) | \
+				 MODE_FLASH_EXTERNAL(FLED2))
+#define MODE_TORCH_MASK		(MODE_TORCH(FLED1) | MODE_TORCH(FLED2))
+
+#define FLED1_IOUT		(1 << 0)
+#define FLED2_IOUT		(1 << 1)
+
+enum max77693_fled {
+	FLED1,
+	FLED2,
+};
+
+enum max77693_led_mode {
+	FLASH,
+	TORCH,
+};
+
+struct max77693_led_config_data {
+	const char *label[2];
+	u32 iout_torch_max[2];
+	u32 iout_flash_max[2];
+	u32 flash_timeout_max[2];
+	u32 num_leds;
+	u32 boost_mode;
+	u32 boost_vout;
+	u32 low_vsys;
+};
+
+struct max77693_sub_led {
+	/* corresponding FLED output identifier */
+	int fled_id;
+	/* corresponding LED Flash class device */
+	struct led_classdev_flash fled_cdev;
+	/* assures led-triggers compatibility */
+	struct work_struct work_brightness_set;
+	/* V4L2 Flash device */
+	struct v4l2_flash *v4l2_flash;
+
+	/* brightness cache */
+	unsigned int torch_brightness;
+	/* flash timeout cache */
+	unsigned int flash_timeout;
+	/* flash faults that may have occurred */
+	u32 flash_faults;
+};
+
+struct max77693_led_device {
+	/* parent mfd regmap */
+	struct regmap *regmap;
+	/* platform device data */
+	struct platform_device *pdev;
+	/* secures access to the device */
+	struct mutex lock;
+
+	/* sub led data */
+	struct max77693_sub_led sub_leds[2];
+
+	/* maximum torch current values for FLED outputs */
+	u32 iout_torch_max[2];
+	/* maximum flash current values for FLED outputs */
+	u32 iout_flash_max[2];
+
+	/* current flash timeout cache */
+	unsigned int current_flash_timeout;
+	/* ITORCH register cache */
+	u8 torch_iout_reg;
+	/* mode of fled outputs */
+	unsigned int mode_flags;
+	/* recently strobed fled */
+	int strobing_sub_led_id;
+	/* bitmask of FLED outputs use state (bit 0. - FLED1, bit 1. - FLED2) */
+	u8 fled_mask;
+	/* FLED modes that can be set */
+	u8 allowed_modes;
+
+	/* arrangement of current outputs */
+	bool iout_joint;
+};
+
+static u8 max77693_led_iout_to_reg(u32 ua)
+{
+	if (ua < FLASH_IOUT_MIN)
+		ua = FLASH_IOUT_MIN;
+	return (ua - FLASH_IOUT_MIN) / FLASH_IOUT_STEP;
+}
+
+static u8 max77693_flash_timeout_to_reg(u32 us)
+{
+	return (us - FLASH_TIMEOUT_MIN) / FLASH_TIMEOUT_STEP;
+}
+
+static inline struct max77693_sub_led *flcdev_to_sub_led(
+					struct led_classdev_flash *fled_cdev)
+{
+	return container_of(fled_cdev, struct max77693_sub_led, fled_cdev);
+}
+
+static inline struct max77693_led_device *sub_led_to_led(
+					struct max77693_sub_led *sub_led)
+{
+	return container_of(sub_led, struct max77693_led_device,
+				sub_leds[sub_led->fled_id]);
+}
+
+static inline u8 max77693_led_vsys_to_reg(u32 mv)
+{
+	return ((mv - MAX_FLASH1_VSYS_MIN) / MAX_FLASH1_VSYS_STEP) << 2;
+}
+
+static inline u8 max77693_led_vout_to_reg(u32 mv)
+{
+	return (mv - FLASH_VOUT_MIN) / FLASH_VOUT_STEP + FLASH_VOUT_RMIN;
+}
+
+static inline bool max77693_fled_used(struct max77693_led_device *led,
+					 int fled_id)
+{
+	u8 fled_bit = (fled_id == FLED1) ? FLED1_IOUT : FLED2_IOUT;
+
+	return led->fled_mask & fled_bit;
+}
+
+static int max77693_set_mode_reg(struct max77693_led_device *led, u8 mode)
+{
+	struct regmap *rmap = led->regmap;
+	int ret, v = 0, i;
+
+	for (i = FLED1; i <= FLED2; ++i) {
+		if (mode & MODE_TORCH(i))
+			v |= FLASH_EN_ON << TORCH_EN_SHIFT(i);
+
+		if (mode & MODE_FLASH(i)) {
+			v |= FLASH_EN_ON << FLASH_EN_SHIFT(i);
+		} else if (mode & MODE_FLASH_EXTERNAL(i)) {
+			v |= FLASH_EN_FLASH << FLASH_EN_SHIFT(i);
+			/*
+			 * Enable hw triggering also for torch mode, as some
+			 * camera sensors use torch led to fathom ambient light
+			 * conditions before strobing the flash.
+			 */
+			v |= FLASH_EN_TORCH << TORCH_EN_SHIFT(i);
+		}
+	}
+
+	/* Reset the register only prior setting flash modes */
+	if (mode & ~(MODE_TORCH(FLED1) | MODE_TORCH(FLED2))) {
+		ret = regmap_write(rmap, MAX77693_LED_REG_FLASH_EN, 0);
+		if (ret < 0)
+			return ret;
+	}
+
+	return regmap_write(rmap, MAX77693_LED_REG_FLASH_EN, v);
+}
+
+static int max77693_add_mode(struct max77693_led_device *led, u8 mode)
+{
+	u8 new_mode_flags;
+	int i, ret;
+
+	if (led->iout_joint)
+		/* Span the mode on FLED2 for joint iouts case */
+		mode |= (mode << 1);
+
+	/*
+	 * FLASH_EXTERNAL mode activates FLASHEN and TORCHEN pins in the device.
+	 * Corresponding register bit fields interfere with SW triggered modes,
+	 * thus clear them to ensure proper device configuration.
+	 */
+	for (i = FLED1; i <= FLED2; ++i)
+		if (mode & MODE_FLASH_EXTERNAL(i))
+			led->mode_flags &= (~MODE_TORCH(i) & ~MODE_FLASH(i));
+
+	new_mode_flags = mode | led->mode_flags;
+	new_mode_flags &= led->allowed_modes;
+
+	if (new_mode_flags ^ led->mode_flags)
+		led->mode_flags = new_mode_flags;
+	else
+		return 0;
+
+	ret = max77693_set_mode_reg(led, led->mode_flags);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Clear flash mode flag after setting the mode to avoid spurious flash
+	 * strobing on each subsequent torch mode setting.
+	 */
+	if (mode & MODE_FLASH_MASK)
+		led->mode_flags &= ~mode;
+
+	return ret;
+}
+
+static int max77693_clear_mode(struct max77693_led_device *led,
+				u8 mode)
+{
+	if (led->iout_joint)
+		/* Clear mode also on FLED2 for joint iouts case */
+		mode |= (mode << 1);
+
+	led->mode_flags &= ~mode;
+
+	return max77693_set_mode_reg(led, led->mode_flags);
+}
+
+static void max77693_add_allowed_modes(struct max77693_led_device *led,
+				int fled_id, enum max77693_led_mode mode)
+{
+	if (mode == FLASH)
+		led->allowed_modes |= (MODE_FLASH(fled_id) |
+				       MODE_FLASH_EXTERNAL(fled_id));
+	else
+		led->allowed_modes |= MODE_TORCH(fled_id);
+}
+
+static void max77693_distribute_currents(struct max77693_led_device *led,
+				int fled_id, enum max77693_led_mode mode,
+				u32 micro_amp, u32 iout_max[2], u32 iout[2])
+{
+	if (!led->iout_joint) {
+		iout[fled_id] = micro_amp;
+		max77693_add_allowed_modes(led, fled_id, mode);
+		return;
+	}
+
+	iout[FLED1] = min(micro_amp, iout_max[FLED1]);
+	iout[FLED2] = micro_amp - iout[FLED1];
+
+	if (mode == FLASH)
+		led->allowed_modes &= ~MODE_FLASH_MASK;
+	else
+		led->allowed_modes &= ~MODE_TORCH_MASK;
+
+	max77693_add_allowed_modes(led, FLED1, mode);
+
+	if (iout[FLED2])
+		max77693_add_allowed_modes(led, FLED2, mode);
+}
+
+static int max77693_set_torch_current(struct max77693_led_device *led,
+				int fled_id, u32 micro_amp)
+{
+	struct regmap *rmap = led->regmap;
+	u8 iout1_reg = 0, iout2_reg = 0;
+	u32 iout[2];
+
+	max77693_distribute_currents(led, fled_id, TORCH, micro_amp,
+					led->iout_torch_max, iout);
+
+	if (fled_id == FLED1 || led->iout_joint) {
+		iout1_reg = max77693_led_iout_to_reg(iout[FLED1]);
+		led->torch_iout_reg &= TORCH_IOUT_MASK(TORCH_IOUT2_SHIFT);
+	}
+	if (fled_id == FLED2 || led->iout_joint) {
+		iout2_reg = max77693_led_iout_to_reg(iout[FLED2]);
+		led->torch_iout_reg &= TORCH_IOUT_MASK(TORCH_IOUT1_SHIFT);
+	}
+
+	led->torch_iout_reg |= ((iout1_reg << TORCH_IOUT1_SHIFT) |
+				(iout2_reg << TORCH_IOUT2_SHIFT));
+
+	return regmap_write(rmap, MAX77693_LED_REG_ITORCH,
+						led->torch_iout_reg);
+}
+
+static int max77693_set_flash_current(struct max77693_led_device *led,
+					int fled_id,
+					u32 micro_amp)
+{
+	struct regmap *rmap = led->regmap;
+	u8 iout1_reg, iout2_reg;
+	u32 iout[2];
+	int ret = -EINVAL;
+
+	max77693_distribute_currents(led, fled_id, FLASH, micro_amp,
+					led->iout_flash_max, iout);
+
+	if (fled_id == FLED1 || led->iout_joint) {
+		iout1_reg = max77693_led_iout_to_reg(iout[FLED1]);
+		ret = regmap_write(rmap, MAX77693_LED_REG_IFLASH1,
+							iout1_reg);
+		if (ret < 0)
+			return ret;
+	}
+	if (fled_id == FLED2 || led->iout_joint) {
+		iout2_reg = max77693_led_iout_to_reg(iout[FLED2]);
+		ret = regmap_write(rmap, MAX77693_LED_REG_IFLASH2,
+							iout2_reg);
+	}
+
+	return ret;
+}
+
+static int max77693_set_timeout(struct max77693_led_device *led, u32 microsec)
+{
+	struct regmap *rmap = led->regmap;
+	u8 v;
+	int ret;
+
+	v = max77693_flash_timeout_to_reg(microsec) | FLASH_TMR_LEVEL;
+
+	ret = regmap_write(rmap, MAX77693_LED_REG_FLASH_TIMER, v);
+	if (ret < 0)
+		return ret;
+
+	led->current_flash_timeout = microsec;
+
+	return 0;
+}
+
+static int max77693_get_strobe_status(struct max77693_led_device *led,
+					bool *state)
+{
+	struct regmap *rmap = led->regmap;
+	unsigned int v;
+	int ret;
+
+	ret = regmap_read(rmap, MAX77693_LED_REG_FLASH_STATUS, &v);
+	if (ret < 0)
+		return ret;
+
+	*state = v & FLASH_STATUS_FLASH_ON;
+
+	return ret;
+}
+
+static int max77693_get_flash_faults(struct max77693_sub_led *sub_led)
+{
+	struct max77693_led_device *led = sub_led_to_led(sub_led);
+	struct regmap *rmap = led->regmap;
+	unsigned int v;
+	u8 fault_open_mask, fault_short_mask;
+	int ret;
+
+	sub_led->flash_faults = 0;
+
+	if (led->iout_joint) {
+		fault_open_mask = FLASH_INT_FLED1_OPEN | FLASH_INT_FLED2_OPEN;
+		fault_short_mask = FLASH_INT_FLED1_SHORT |
+							FLASH_INT_FLED2_SHORT;
+	} else {
+		fault_open_mask = (sub_led->fled_id == FLED1) ?
+						FLASH_INT_FLED1_OPEN :
+						FLASH_INT_FLED2_OPEN;
+		fault_short_mask = (sub_led->fled_id == FLED1) ?
+						FLASH_INT_FLED1_SHORT :
+						FLASH_INT_FLED2_SHORT;
+	}
+
+	ret = regmap_read(rmap, MAX77693_LED_REG_FLASH_INT, &v);
+	if (ret < 0)
+		return ret;
+
+	if (v & fault_open_mask)
+		sub_led->flash_faults |= LED_FAULT_OVER_VOLTAGE;
+	if (v & fault_short_mask)
+		sub_led->flash_faults |= LED_FAULT_SHORT_CIRCUIT;
+	if (v & FLASH_INT_OVER_CURRENT)
+		sub_led->flash_faults |= LED_FAULT_OVER_CURRENT;
+
+	return 0;
+}
+
+static int max77693_setup(struct max77693_led_device *led,
+			 struct max77693_led_config_data *led_cfg)
+{
+	struct regmap *rmap = led->regmap;
+	int i, first_led, last_led, ret;
+	u32 max_flash_curr[2];
+	u8 v;
+
+	/*
+	 * Initialize only flash current. Torch current doesn't
+	 * require initialization as ITORCH register is written with
+	 * new value each time brightness_set op is called.
+	 */
+	if (led->iout_joint) {
+		first_led = FLED1;
+		last_led = FLED1;
+		max_flash_curr[FLED1] = led_cfg->iout_flash_max[FLED1] +
+					led_cfg->iout_flash_max[FLED2];
+	} else {
+		first_led = max77693_fled_used(led, FLED1) ? FLED1 : FLED2;
+		last_led = max77693_fled_used(led, FLED2) ? FLED2 : FLED1;
+		max_flash_curr[FLED1] = led_cfg->iout_flash_max[FLED1];
+		max_flash_curr[FLED2] = led_cfg->iout_flash_max[FLED2];
+	}
+
+	for (i = first_led; i <= last_led; ++i) {
+		ret = max77693_set_flash_current(led, i,
+					max_flash_curr[i]);
+		if (ret < 0)
+			return ret;
+	}
+
+	v = TORCH_TMR_NO_TIMER | MAX77693_LED_TRIG_TYPE_LEVEL;
+	ret = regmap_write(rmap, MAX77693_LED_REG_ITORCHTIMER, v);
+	if (ret < 0)
+		return ret;
+
+	if (led_cfg->low_vsys > 0)
+		v = max77693_led_vsys_to_reg(led_cfg->low_vsys) |
+						MAX_FLASH1_MAX_FL_EN;
+	else
+		v = 0;
+
+	ret = regmap_write(rmap, MAX77693_LED_REG_MAX_FLASH1, v);
+	if (ret < 0)
+		return ret;
+	ret = regmap_write(rmap, MAX77693_LED_REG_MAX_FLASH2, 0);
+	if (ret < 0)
+		return ret;
+
+	if (led_cfg->boost_mode == MAX77693_LED_BOOST_FIXED)
+		v = FLASH_BOOST_FIXED;
+	else
+		v = led_cfg->boost_mode | led_cfg->boost_mode << 1;
+
+	if (max77693_fled_used(led, FLED1) && max77693_fled_used(led, FLED2))
+		v |= FLASH_BOOST_LEDNUM_2;
+
+	ret = regmap_write(rmap, MAX77693_LED_REG_VOUT_CNTL, v);
+	if (ret < 0)
+		return ret;
+
+	v = max77693_led_vout_to_reg(led_cfg->boost_vout);
+	ret = regmap_write(rmap, MAX77693_LED_REG_VOUT_FLASH1, v);
+	if (ret < 0)
+		return ret;
+
+	return max77693_set_mode_reg(led, MODE_OFF);
+}
+
+static int __max77693_led_brightness_set(struct max77693_led_device *led,
+					int fled_id, enum led_brightness value)
+{
+	int ret;
+
+	mutex_lock(&led->lock);
+
+	if (value == 0) {
+		ret = max77693_clear_mode(led, MODE_TORCH(fled_id));
+		if (ret < 0)
+			dev_dbg(&led->pdev->dev,
+				"Failed to clear torch mode (%d)\n",
+				ret);
+		goto unlock;
+	}
+
+	ret = max77693_set_torch_current(led, fled_id, value * TORCH_IOUT_STEP);
+	if (ret < 0) {
+		dev_dbg(&led->pdev->dev,
+			"Failed to set torch current (%d)\n",
+			ret);
+		goto unlock;
+	}
+
+	ret = max77693_add_mode(led, MODE_TORCH(fled_id));
+	if (ret < 0)
+		dev_dbg(&led->pdev->dev,
+			"Failed to set torch mode (%d)\n",
+			ret);
+unlock:
+	mutex_unlock(&led->lock);
+	return ret;
+}
+
+static void max77693_led_brightness_set_work(
+					struct work_struct *work)
+{
+	struct max77693_sub_led *sub_led =
+			container_of(work, struct max77693_sub_led,
+					work_brightness_set);
+	struct max77693_led_device *led = sub_led_to_led(sub_led);
+
+	__max77693_led_brightness_set(led, sub_led->fled_id,
+				sub_led->torch_brightness);
+}
+
+/* LED subsystem callbacks */
+
+static int max77693_led_brightness_set_sync(
+				struct led_classdev *led_cdev,
+				enum led_brightness value)
+{
+	struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+	struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+	struct max77693_led_device *led = sub_led_to_led(sub_led);
+
+	return __max77693_led_brightness_set(led, sub_led->fled_id, value);
+}
+
+static void max77693_led_brightness_set(
+				struct led_classdev *led_cdev,
+				enum led_brightness value)
+{
+	struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+	struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+
+	sub_led->torch_brightness = value;
+	schedule_work(&sub_led->work_brightness_set);
+}
+
+static int max77693_led_flash_brightness_set(
+				struct led_classdev_flash *fled_cdev,
+				u32 brightness)
+{
+	struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+	struct max77693_led_device *led = sub_led_to_led(sub_led);
+	int ret;
+
+	mutex_lock(&led->lock);
+	ret = max77693_set_flash_current(led, sub_led->fled_id, brightness);
+	mutex_unlock(&led->lock);
+
+	return ret;
+}
+
+static int max77693_led_flash_strobe_set(
+				struct led_classdev_flash *fled_cdev,
+				bool state)
+{
+	struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+	struct max77693_led_device *led = sub_led_to_led(sub_led);
+	int fled_id = sub_led->fled_id;
+	int ret;
+
+	mutex_lock(&led->lock);
+
+	if (!state) {
+		ret = max77693_clear_mode(led, MODE_FLASH(fled_id));
+		goto unlock;
+	}
+
+	if (sub_led->flash_timeout != led->current_flash_timeout) {
+		ret = max77693_set_timeout(led, sub_led->flash_timeout);
+		if (ret < 0)
+			goto unlock;
+	}
+
+	led->strobing_sub_led_id = fled_id;
+
+	ret = max77693_add_mode(led, MODE_FLASH(fled_id));
+	if (ret < 0)
+		goto unlock;
+
+	ret = max77693_get_flash_faults(sub_led);
+
+unlock:
+	mutex_unlock(&led->lock);
+	return ret;
+}
+
+static int max77693_led_flash_fault_get(
+				struct led_classdev_flash *fled_cdev,
+				u32 *fault)
+{
+	struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+
+	*fault = sub_led->flash_faults;
+
+	return 0;
+}
+
+static int max77693_led_flash_strobe_get(
+				struct led_classdev_flash *fled_cdev,
+				bool *state)
+{
+	struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+	struct max77693_led_device *led = sub_led_to_led(sub_led);
+	int ret;
+
+	if (!state)
+		return -EINVAL;
+
+	mutex_lock(&led->lock);
+
+	ret = max77693_get_strobe_status(led, state);
+
+	*state = !!(*state && (led->strobing_sub_led_id == sub_led->fled_id));
+
+	mutex_unlock(&led->lock);
+
+	return ret;
+}
+
+static int max77693_led_flash_timeout_set(
+				struct led_classdev_flash *fled_cdev,
+				u32 timeout)
+{
+	struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
+	struct max77693_led_device *led = sub_led_to_led(sub_led);
+
+	mutex_lock(&led->lock);
+	sub_led->flash_timeout = timeout;
+	mutex_unlock(&led->lock);
+
+	return 0;
+}
+
+static int max77693_led_parse_dt(struct max77693_led_device *led,
+				struct max77693_led_config_data *cfg,
+				struct device_node **sub_nodes)
+{
+	struct device *dev = &led->pdev->dev;
+	struct max77693_sub_led *sub_leds = led->sub_leds;
+	struct device_node *node = dev->of_node, *child_node;
+	struct property *prop;
+	u32 led_sources[2];
+	int i, ret, fled_id;
+
+	of_property_read_u32(node, "maxim,boost-mode", &cfg->boost_mode);
+	of_property_read_u32(node, "maxim,boost-mvout", &cfg->boost_vout);
+	of_property_read_u32(node, "maxim,mvsys-min", &cfg->low_vsys);
+
+	for_each_available_child_of_node(node, child_node) {
+		prop = of_find_property(child_node, "led-sources", NULL);
+		if (prop) {
+			const __be32 *srcs = NULL;
+
+			for (i = 0; i < ARRAY_SIZE(led_sources); ++i) {
+				srcs = of_prop_next_u32(prop, srcs,
+							&led_sources[i]);
+				if (!srcs)
+					break;
+			}
+		} else {
+			dev_err(dev,
+				"led-sources DT property missing\n");
+			of_node_put(child_node);
+			return -EINVAL;
+		}
+
+		if (i == 2) {
+			fled_id = FLED1;
+			led->fled_mask = FLED1_IOUT | FLED2_IOUT;
+		} else if (led_sources[0] == FLED1) {
+			fled_id = FLED1;
+			led->fled_mask |= FLED1_IOUT;
+		} else if (led_sources[0] == FLED2) {
+			fled_id = FLED2;
+			led->fled_mask |= FLED2_IOUT;
+		} else {
+			dev_err(dev,
+				"Wrong led-sources DT property value.\n");
+			of_node_put(child_node);
+			return -EINVAL;
+		}
+
+		if (sub_nodes[fled_id]) {
+			dev_err(dev,
+				"Conflicting \"led-sources\" DT properties\n");
+			return -EINVAL;
+		}
+
+		sub_nodes[fled_id] = child_node;
+		sub_leds[fled_id].fled_id = fled_id;
+
+		cfg->label[fled_id] =
+			of_get_property(child_node, "label", NULL) ? :
+						child_node->name;
+
+		ret = of_property_read_u32(child_node, "led-max-microamp",
+					&cfg->iout_torch_max[fled_id]);
+		if (ret < 0) {
+			cfg->iout_torch_max[fled_id] = TORCH_IOUT_MIN;
+			dev_warn(dev, "led-max-microamp DT property missing\n");
+		}
+
+		ret = of_property_read_u32(child_node, "flash-max-microamp",
+					&cfg->iout_flash_max[fled_id]);
+		if (ret < 0) {
+			cfg->iout_flash_max[fled_id] = FLASH_IOUT_MIN;
+			dev_warn(dev,
+				 "flash-max-microamp DT property missing\n");
+		}
+
+		ret = of_property_read_u32(child_node, "flash-max-timeout-us",
+					&cfg->flash_timeout_max[fled_id]);
+		if (ret < 0) {
+			cfg->flash_timeout_max[fled_id] = FLASH_TIMEOUT_MIN;
+			dev_warn(dev,
+				 "flash-max-timeout-us DT property missing\n");
+		}
+
+		if (++cfg->num_leds == 2 ||
+		    (max77693_fled_used(led, FLED1) &&
+		     max77693_fled_used(led, FLED2))) {
+			of_node_put(child_node);
+			break;
+		}
+	}
+
+	if (cfg->num_leds == 0) {
+		dev_err(dev, "No DT child node found for connected LED(s).\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void clamp_align(u32 *v, u32 min, u32 max, u32 step)
+{
+	*v = clamp_val(*v, min, max);
+	if (step > 1)
+		*v = (*v - min) / step * step + min;
+}
+
+static void max77693_align_iout_current(struct max77693_led_device *led,
+					u32 *iout, u32 min, u32 max, u32 step)
+{
+	int i;
+
+	if (led->iout_joint) {
+		if (iout[FLED1] > min) {
+			iout[FLED1] /= 2;
+			iout[FLED2] = iout[FLED1];
+		} else {
+			iout[FLED1] = min;
+			iout[FLED2] = 0;
+			return;
+		}
+	}
+
+	for (i = FLED1; i <= FLED2; ++i)
+		if (max77693_fled_used(led, i))
+			clamp_align(&iout[i], min, max, step);
+		else
+			iout[i] = 0;
+}
+
+static void max77693_led_validate_configuration(struct max77693_led_device *led,
+					struct max77693_led_config_data *cfg)
+{
+	u32 flash_iout_max = cfg->boost_mode ? FLASH_IOUT_MAX_2LEDS :
+					       FLASH_IOUT_MAX_1LED;
+	int i;
+
+	if (cfg->num_leds == 1 &&
+	    max77693_fled_used(led, FLED1) && max77693_fled_used(led, FLED2))
+		led->iout_joint = true;
+
+	cfg->boost_mode = clamp_val(cfg->boost_mode, MAX77693_LED_BOOST_NONE,
+			    MAX77693_LED_BOOST_FIXED);
+
+	/* Boost must be enabled if both current outputs are used */
+	if ((cfg->boost_mode == MAX77693_LED_BOOST_NONE) && led->iout_joint)
+		cfg->boost_mode = MAX77693_LED_BOOST_FIXED;
+
+	max77693_align_iout_current(led, cfg->iout_torch_max,
+			TORCH_IOUT_MIN, TORCH_IOUT_MAX, TORCH_IOUT_STEP);
+
+	max77693_align_iout_current(led, cfg->iout_flash_max,
+			FLASH_IOUT_MIN, flash_iout_max, FLASH_IOUT_STEP);
+
+	for (i = 0; i < ARRAY_SIZE(cfg->flash_timeout_max); ++i)
+		clamp_align(&cfg->flash_timeout_max[i], FLASH_TIMEOUT_MIN,
+				FLASH_TIMEOUT_MAX, FLASH_TIMEOUT_STEP);
+
+	clamp_align(&cfg->boost_vout, FLASH_VOUT_MIN, FLASH_VOUT_MAX,
+							FLASH_VOUT_STEP);
+
+	if (cfg->low_vsys)
+		clamp_align(&cfg->low_vsys, MAX_FLASH1_VSYS_MIN,
+				MAX_FLASH1_VSYS_MAX, MAX_FLASH1_VSYS_STEP);
+}
+
+static int max77693_led_get_configuration(struct max77693_led_device *led,
+				struct max77693_led_config_data *cfg,
+				struct device_node **sub_nodes)
+{
+	int ret;
+
+	ret = max77693_led_parse_dt(led, cfg, sub_nodes);
+	if (ret < 0)
+		return ret;
+
+	max77693_led_validate_configuration(led, cfg);
+
+	memcpy(led->iout_torch_max, cfg->iout_torch_max,
+				sizeof(led->iout_torch_max));
+	memcpy(led->iout_flash_max, cfg->iout_flash_max,
+				sizeof(led->iout_flash_max));
+
+	return 0;
+}
+
+static const struct led_flash_ops flash_ops = {
+	.flash_brightness_set	= max77693_led_flash_brightness_set,
+	.strobe_set		= max77693_led_flash_strobe_set,
+	.strobe_get		= max77693_led_flash_strobe_get,
+	.timeout_set		= max77693_led_flash_timeout_set,
+	.fault_get		= max77693_led_flash_fault_get,
+};
+
+static void max77693_init_flash_settings(struct max77693_sub_led *sub_led,
+				 struct max77693_led_config_data *led_cfg)
+{
+	struct led_classdev_flash *fled_cdev = &sub_led->fled_cdev;
+	struct max77693_led_device *led = sub_led_to_led(sub_led);
+	int fled_id = sub_led->fled_id;
+	struct led_flash_setting *setting;
+
+	/* Init flash intensity setting */
+	setting = &fled_cdev->brightness;
+	setting->min = FLASH_IOUT_MIN;
+	setting->max = led->iout_joint ?
+		led_cfg->iout_flash_max[FLED1] +
+		led_cfg->iout_flash_max[FLED2] :
+		led_cfg->iout_flash_max[fled_id];
+	setting->step = FLASH_IOUT_STEP;
+	setting->val = setting->max;
+
+	/* Init flash timeout setting */
+	setting = &fled_cdev->timeout;
+	setting->min = FLASH_TIMEOUT_MIN;
+	setting->max = led_cfg->flash_timeout_max[fled_id];
+	setting->step = FLASH_TIMEOUT_STEP;
+	setting->val = setting->max;
+}
+
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+
+static int max77693_led_external_strobe_set(
+				struct v4l2_flash *v4l2_flash,
+				bool enable)
+{
+	struct max77693_sub_led *sub_led =
+				flcdev_to_sub_led(v4l2_flash->fled_cdev);
+	struct max77693_led_device *led = sub_led_to_led(sub_led);
+	int fled_id = sub_led->fled_id;
+	int ret;
+
+	mutex_lock(&led->lock);
+
+	if (enable)
+		ret = max77693_add_mode(led, MODE_FLASH_EXTERNAL(fled_id));
+	else
+		ret = max77693_clear_mode(led, MODE_FLASH_EXTERNAL(fled_id));
+
+	mutex_unlock(&led->lock);
+
+	return ret;
+}
+
+static void max77693_init_v4l2_flash_config(struct max77693_sub_led *sub_led,
+				struct max77693_led_config_data *led_cfg,
+				struct v4l2_flash_config *v4l2_sd_cfg)
+{
+	struct max77693_led_device *led = sub_led_to_led(sub_led);
+	struct device *dev = &led->pdev->dev;
+	struct max77693_dev *iodev = dev_get_drvdata(dev->parent);
+	struct i2c_client *i2c = iodev->i2c;
+	struct led_flash_setting *s;
+
+	snprintf(v4l2_sd_cfg->dev_name, sizeof(v4l2_sd_cfg->dev_name),
+		 "%s %d-%04x", sub_led->fled_cdev.led_cdev.name,
+		 i2c_adapter_id(i2c->adapter), i2c->addr);
+
+	s = &v4l2_sd_cfg->torch_intensity;
+	s->min = TORCH_IOUT_MIN;
+	s->max = sub_led->fled_cdev.led_cdev.max_brightness * TORCH_IOUT_STEP;
+	s->step = TORCH_IOUT_STEP;
+	s->val = s->max;
+
+	/* Init flash faults config */
+	v4l2_sd_cfg->flash_faults = LED_FAULT_OVER_VOLTAGE |
+				LED_FAULT_SHORT_CIRCUIT |
+				LED_FAULT_OVER_CURRENT;
+
+	v4l2_sd_cfg->has_external_strobe = true;
+}
+
+static const struct v4l2_flash_ops v4l2_flash_ops = {
+	.external_strobe_set = max77693_led_external_strobe_set,
+};
+#else
+static inline void max77693_init_v4l2_flash_config(
+				struct max77693_sub_led *sub_led,
+				struct max77693_led_config_data *led_cfg,
+				struct v4l2_flash_config *v4l2_sd_cfg)
+{
+}
+static const struct v4l2_flash_ops v4l2_flash_ops;
+#endif
+
+static void max77693_init_fled_cdev(struct max77693_sub_led *sub_led,
+				struct max77693_led_config_data *led_cfg)
+{
+	struct max77693_led_device *led = sub_led_to_led(sub_led);
+	int fled_id = sub_led->fled_id;
+	struct led_classdev_flash *fled_cdev;
+	struct led_classdev *led_cdev;
+
+	/* Initialize LED Flash class device */
+	fled_cdev = &sub_led->fled_cdev;
+	fled_cdev->ops = &flash_ops;
+	led_cdev = &fled_cdev->led_cdev;
+
+	led_cdev->name = led_cfg->label[fled_id];
+
+	led_cdev->brightness_set = max77693_led_brightness_set;
+	led_cdev->brightness_set_sync = max77693_led_brightness_set_sync;
+	led_cdev->max_brightness = (led->iout_joint ?
+					led_cfg->iout_torch_max[FLED1] +
+					led_cfg->iout_torch_max[FLED2] :
+					led_cfg->iout_torch_max[fled_id]) /
+				   TORCH_IOUT_STEP;
+	led_cdev->flags |= LED_DEV_CAP_FLASH;
+	INIT_WORK(&sub_led->work_brightness_set,
+			max77693_led_brightness_set_work);
+
+	max77693_init_flash_settings(sub_led, led_cfg);
+
+	/* Init flash timeout cache */
+	sub_led->flash_timeout = fled_cdev->timeout.val;
+}
+
+static int max77693_register_led(struct max77693_sub_led *sub_led,
+				 struct max77693_led_config_data *led_cfg,
+				 struct device_node *sub_node)
+{
+	struct max77693_led_device *led = sub_led_to_led(sub_led);
+	struct led_classdev_flash *fled_cdev = &sub_led->fled_cdev;
+	struct device *dev = &led->pdev->dev;
+	struct v4l2_flash_config v4l2_sd_cfg = {};
+	int ret;
+
+	/* Register in the LED subsystem */
+	ret = led_classdev_flash_register(dev, fled_cdev);
+	if (ret < 0)
+		return ret;
+
+	max77693_init_v4l2_flash_config(sub_led, led_cfg, &v4l2_sd_cfg);
+
+	/* Register in the V4L2 subsystem. */
+	sub_led->v4l2_flash = v4l2_flash_init(dev, sub_node, fled_cdev, NULL,
+					      &v4l2_flash_ops, &v4l2_sd_cfg);
+	if (IS_ERR(sub_led->v4l2_flash)) {
+		ret = PTR_ERR(sub_led->v4l2_flash);
+		goto err_v4l2_flash_init;
+	}
+
+	return 0;
+
+err_v4l2_flash_init:
+	led_classdev_flash_unregister(fled_cdev);
+	return ret;
+}
+
+static int max77693_led_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct max77693_dev *iodev = dev_get_drvdata(dev->parent);
+	struct max77693_led_device *led;
+	struct max77693_sub_led *sub_leds;
+	struct device_node *sub_nodes[2] = {};
+	struct max77693_led_config_data led_cfg = {};
+	int init_fled_cdev[2], i, ret;
+
+	led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	led->pdev = pdev;
+	led->regmap = iodev->regmap;
+	led->allowed_modes = MODE_FLASH_MASK;
+	sub_leds = led->sub_leds;
+
+	platform_set_drvdata(pdev, led);
+	ret = max77693_led_get_configuration(led, &led_cfg, sub_nodes);
+	if (ret < 0)
+		return ret;
+
+	ret = max77693_setup(led, &led_cfg);
+	if (ret < 0)
+		return ret;
+
+	mutex_init(&led->lock);
+
+	init_fled_cdev[FLED1] =
+			led->iout_joint || max77693_fled_used(led, FLED1);
+	init_fled_cdev[FLED2] =
+			!led->iout_joint && max77693_fled_used(led, FLED2);
+
+	for (i = FLED1; i <= FLED2; ++i) {
+		if (!init_fled_cdev[i])
+			continue;
+
+		/* Initialize LED Flash class device */
+		max77693_init_fled_cdev(&sub_leds[i], &led_cfg);
+
+		/*
+		 * Register LED Flash class device and corresponding
+		 * V4L2 Flash device.
+		 */
+		ret = max77693_register_led(&sub_leds[i], &led_cfg,
+						sub_nodes[i]);
+		if (ret < 0) {
+			/*
+			 * At this moment FLED1 might have been already
+			 * registered and it needs to be released.
+			 */
+			if (i == FLED2)
+				goto err_register_led2;
+			else
+				goto err_register_led1;
+		}
+	}
+
+	return 0;
+
+err_register_led2:
+	/* It is possible than only FLED2 was to be registered */
+	if (!init_fled_cdev[FLED1])
+		goto err_register_led1;
+	v4l2_flash_release(sub_leds[FLED1].v4l2_flash);
+	led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev);
+err_register_led1:
+	mutex_destroy(&led->lock);
+
+	return ret;
+}
+
+static int max77693_led_remove(struct platform_device *pdev)
+{
+	struct max77693_led_device *led = platform_get_drvdata(pdev);
+	struct max77693_sub_led *sub_leds = led->sub_leds;
+
+	if (led->iout_joint || max77693_fled_used(led, FLED1)) {
+		v4l2_flash_release(sub_leds[FLED1].v4l2_flash);
+		led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev);
+		cancel_work_sync(&sub_leds[FLED1].work_brightness_set);
+	}
+
+	if (!led->iout_joint && max77693_fled_used(led, FLED2)) {
+		v4l2_flash_release(sub_leds[FLED2].v4l2_flash);
+		led_classdev_flash_unregister(&sub_leds[FLED2].fled_cdev);
+		cancel_work_sync(&sub_leds[FLED2].work_brightness_set);
+	}
+
+	mutex_destroy(&led->lock);
+
+	return 0;
+}
+
+static const struct of_device_id max77693_led_dt_match[] = {
+	{ .compatible = "maxim,max77693-led" },
+	{},
+};
+
+static struct platform_driver max77693_led_driver = {
+	.probe		= max77693_led_probe,
+	.remove		= max77693_led_remove,
+	.driver		= {
+		.name	= "max77693-led",
+		.of_match_table = max77693_led_dt_match,
+	},
+};
+
+module_platform_driver(max77693_led_driver);
+
+MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>");
+MODULE_AUTHOR("Andrzej Hajda <a.hajda@samsung.com>");
+MODULE_DESCRIPTION("Maxim MAX77693 led flash driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-tlc591xx.c b/drivers/leds/leds-tlc591xx.c
new file mode 100644
index 0000000..de16c29
--- /dev/null
+++ b/drivers/leds/leds-tlc591xx.c
@@ -0,0 +1,300 @@
+/*
+ * Copyright 2014 Belkin Inc.
+ * Copyright 2015 Andrew Lunn <andrew@lunn.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#define TLC591XX_MAX_LEDS	16
+
+#define TLC591XX_REG_MODE1	0x00
+#define MODE1_RESPON_ADDR_MASK	0xF0
+#define MODE1_NORMAL_MODE	(0 << 4)
+#define MODE1_SPEED_MODE	(1 << 4)
+
+#define TLC591XX_REG_MODE2	0x01
+#define MODE2_DIM		(0 << 5)
+#define MODE2_BLINK		(1 << 5)
+#define MODE2_OCH_STOP		(0 << 3)
+#define MODE2_OCH_ACK		(1 << 3)
+
+#define TLC591XX_REG_PWM(x)	(0x02 + (x))
+
+#define TLC591XX_REG_GRPPWM	0x12
+#define TLC591XX_REG_GRPFREQ	0x13
+
+/* LED Driver Output State, determine the source that drives LED outputs */
+#define LEDOUT_OFF		0x0	/* Output LOW */
+#define LEDOUT_ON		0x1	/* Output HI-Z */
+#define LEDOUT_DIM		0x2	/* Dimming */
+#define LEDOUT_BLINK		0x3	/* Blinking */
+#define LEDOUT_MASK		0x3
+
+#define ldev_to_led(c)		container_of(c, struct tlc591xx_led, ldev)
+#define work_to_led(work)	container_of(work, struct tlc591xx_led, work)
+
+struct tlc591xx_led {
+	bool active;
+	unsigned int led_no;
+	struct led_classdev ldev;
+	struct work_struct work;
+	struct tlc591xx_priv *priv;
+};
+
+struct tlc591xx_priv {
+	struct tlc591xx_led leds[TLC591XX_MAX_LEDS];
+	struct regmap *regmap;
+	unsigned int reg_ledout_offset;
+};
+
+struct tlc591xx {
+	unsigned int max_leds;
+	unsigned int reg_ledout_offset;
+};
+
+static const struct tlc591xx tlc59116 = {
+	.max_leds = 16,
+	.reg_ledout_offset = 0x14,
+};
+
+static const struct tlc591xx tlc59108 = {
+	.max_leds = 8,
+	.reg_ledout_offset = 0x0c,
+};
+
+static int
+tlc591xx_set_mode(struct regmap *regmap, u8 mode)
+{
+	int err;
+	u8 val;
+
+	err = regmap_write(regmap, TLC591XX_REG_MODE1, MODE1_NORMAL_MODE);
+	if (err)
+		return err;
+
+	val = MODE2_OCH_STOP | mode;
+
+	return regmap_write(regmap, TLC591XX_REG_MODE2, val);
+}
+
+static int
+tlc591xx_set_ledout(struct tlc591xx_priv *priv, struct tlc591xx_led *led,
+		    u8 val)
+{
+	unsigned int i = (led->led_no % 4) * 2;
+	unsigned int mask = LEDOUT_MASK << i;
+	unsigned int addr = priv->reg_ledout_offset + (led->led_no >> 2);
+
+	val = val << i;
+
+	return regmap_update_bits(priv->regmap, addr, mask, val);
+}
+
+static int
+tlc591xx_set_pwm(struct tlc591xx_priv *priv, struct tlc591xx_led *led,
+		 u8 brightness)
+{
+	u8 pwm = TLC591XX_REG_PWM(led->led_no);
+
+	return regmap_write(priv->regmap, pwm, brightness);
+}
+
+static void
+tlc591xx_led_work(struct work_struct *work)
+{
+	struct tlc591xx_led *led = work_to_led(work);
+	struct tlc591xx_priv *priv = led->priv;
+	enum led_brightness brightness = led->ldev.brightness;
+	int err;
+
+	switch (brightness) {
+	case 0:
+		err = tlc591xx_set_ledout(priv, led, LEDOUT_OFF);
+		break;
+	case LED_FULL:
+		err = tlc591xx_set_ledout(priv, led, LEDOUT_ON);
+		break;
+	default:
+		err = tlc591xx_set_ledout(priv, led, LEDOUT_DIM);
+		if (!err)
+			err = tlc591xx_set_pwm(priv, led, brightness);
+	}
+
+	if (err)
+		dev_err(led->ldev.dev, "Failed setting brightness\n");
+}
+
+static void
+tlc591xx_brightness_set(struct led_classdev *led_cdev,
+			enum led_brightness brightness)
+{
+	struct tlc591xx_led *led = ldev_to_led(led_cdev);
+
+	led->ldev.brightness = brightness;
+	schedule_work(&led->work);
+}
+
+static void
+tlc591xx_destroy_devices(struct tlc591xx_priv *priv, unsigned int j)
+{
+	int i = j;
+
+	while (--i >= 0) {
+		if (priv->leds[i].active) {
+			led_classdev_unregister(&priv->leds[i].ldev);
+			cancel_work_sync(&priv->leds[i].work);
+		}
+	}
+}
+
+static int
+tlc591xx_configure(struct device *dev,
+		   struct tlc591xx_priv *priv,
+		   const struct tlc591xx *tlc591xx)
+{
+	unsigned int i;
+	int err = 0;
+
+	tlc591xx_set_mode(priv->regmap, MODE2_DIM);
+	for (i = 0; i < TLC591XX_MAX_LEDS; i++) {
+		struct tlc591xx_led *led = &priv->leds[i];
+
+		if (!led->active)
+			continue;
+
+		led->priv = priv;
+		led->led_no = i;
+		led->ldev.brightness_set = tlc591xx_brightness_set;
+		led->ldev.max_brightness = LED_FULL;
+		INIT_WORK(&led->work, tlc591xx_led_work);
+		err = led_classdev_register(dev, &led->ldev);
+		if (err < 0) {
+			dev_err(dev, "couldn't register LED %s\n",
+				led->ldev.name);
+			goto exit;
+		}
+	}
+
+	return 0;
+
+exit:
+	tlc591xx_destroy_devices(priv, i);
+	return err;
+}
+
+static const struct regmap_config tlc591xx_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0x1e,
+};
+
+static const struct of_device_id of_tlc591xx_leds_match[] = {
+	{ .compatible = "ti,tlc59116",
+	  .data = &tlc59116 },
+	{ .compatible = "ti,tlc59108",
+	  .data = &tlc59108 },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_tlc591xx_leds_match);
+
+static int
+tlc591xx_probe(struct i2c_client *client,
+	       const struct i2c_device_id *id)
+{
+	struct device_node *np = client->dev.of_node, *child;
+	struct device *dev = &client->dev;
+	const struct of_device_id *match;
+	const struct tlc591xx *tlc591xx;
+	struct tlc591xx_priv *priv;
+	int err, count, reg;
+
+	match = of_match_device(of_tlc591xx_leds_match, dev);
+	if (!match)
+		return -ENODEV;
+
+	tlc591xx = match->data;
+	if (!np)
+		return -ENODEV;
+
+	count = of_get_child_count(np);
+	if (!count || count > tlc591xx->max_leds)
+		return -EINVAL;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regmap = devm_regmap_init_i2c(client, &tlc591xx_regmap);
+	if (IS_ERR(priv->regmap)) {
+		err = PTR_ERR(priv->regmap);
+		dev_err(dev, "Failed to allocate register map: %d\n", err);
+		return err;
+	}
+	priv->reg_ledout_offset = tlc591xx->reg_ledout_offset;
+
+	i2c_set_clientdata(client, priv);
+
+	for_each_child_of_node(np, child) {
+		err = of_property_read_u32(child, "reg", &reg);
+		if (err)
+			return err;
+		if (reg < 0 || reg >= tlc591xx->max_leds)
+			return -EINVAL;
+		if (priv->leds[reg].active)
+			return -EINVAL;
+		priv->leds[reg].active = true;
+		priv->leds[reg].ldev.name =
+			of_get_property(child, "label", NULL) ? : child->name;
+		priv->leds[reg].ldev.default_trigger =
+			of_get_property(child, "linux,default-trigger", NULL);
+	}
+	return tlc591xx_configure(dev, priv, tlc591xx);
+}
+
+static int
+tlc591xx_remove(struct i2c_client *client)
+{
+	struct tlc591xx_priv *priv = i2c_get_clientdata(client);
+
+	tlc591xx_destroy_devices(priv, TLC591XX_MAX_LEDS);
+
+	return 0;
+}
+
+static const struct i2c_device_id tlc591xx_id[] = {
+	{ "tlc59116" },
+	{ "tlc59108" },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, tlc591xx_id);
+
+static struct i2c_driver tlc591xx_driver = {
+	.driver = {
+		.name = "tlc591xx",
+		.of_match_table = of_match_ptr(of_tlc591xx_leds_match),
+	},
+	.probe = tlc591xx_probe,
+	.remove = tlc591xx_remove,
+	.id_table = tlc591xx_id,
+};
+
+module_i2c_driver(tlc591xx_driver);
+
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("TLC591XX LED driver");
diff --git a/drivers/leds/leds.h b/drivers/leds/leds.h
index 79efe57..bc89d7a 100644
--- a/drivers/leds/leds.h
+++ b/drivers/leds/leds.h
@@ -13,7 +13,6 @@
 #ifndef __LEDS_H_INCLUDED
 #define __LEDS_H_INCLUDED
 
-#include <linux/device.h>
 #include <linux/rwsem.h>
 #include <linux/leds.h>
 
@@ -50,27 +49,4 @@ void led_stop_software_blink(struct led_classdev *led_cdev);
 extern struct rw_semaphore leds_list_lock;
 extern struct list_head leds_list;
 
-#ifdef CONFIG_LEDS_TRIGGERS
-void led_trigger_set_default(struct led_classdev *led_cdev);
-void led_trigger_set(struct led_classdev *led_cdev,
-			struct led_trigger *trigger);
-void led_trigger_remove(struct led_classdev *led_cdev);
-
-static inline void *led_get_trigger_data(struct led_classdev *led_cdev)
-{
-	return led_cdev->trigger_data;
-}
-
-#else
-#define led_trigger_set_default(x) do {} while (0)
-#define led_trigger_set(x, y) do {} while (0)
-#define led_trigger_remove(x) do {} while (0)
-#define led_get_trigger_data(x) (NULL)
-#endif
-
-ssize_t led_trigger_store(struct device *dev, struct device_attribute *attr,
-			const char *buf, size_t count);
-ssize_t led_trigger_show(struct device *dev, struct device_attribute *attr,
-			char *buf);
-
 #endif	/* __LEDS_H_INCLUDED */