leds-pca9633: Rename to leds-pca963x

The driver now supports the chips pca9633 and pca9634, therefore we
rename the files to more generic and meaningul names

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>

3 files changed, 146 insertions, 146 deletions

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index e7977aa..a1a52be 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -291,7 +291,7 @@ config LEDS_PCA955X
 	  LED driver chips accessed via the I2C bus.  Supported
 	  devices include PCA9550, PCA9551, PCA9552, and PCA9553.
 
-config LEDS_PCA9633
+config LEDS_PCA963X
 	tristate "LED support for PCA963x I2C chip"
 	depends on LEDS_CLASS
 	depends on I2C
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 3013113..c7e3542 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -35,7 +35,7 @@ obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
 obj-$(CONFIG_LEDS_OT200)		+= leds-ot200.o
 obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o
 obj-$(CONFIG_LEDS_PCA955X)		+= leds-pca955x.o
-obj-$(CONFIG_LEDS_PCA9633)		+= leds-pca9633.o
+obj-$(CONFIG_LEDS_PCA963X)		+= leds-pca963x.o
 obj-$(CONFIG_LEDS_DA903X)		+= leds-da903x.o
 obj-$(CONFIG_LEDS_DA9052)		+= leds-da9052.o
 obj-$(CONFIG_LEDS_WM831X_STATUS)	+= leds-wm831x-status.o
diff --git a/drivers/leds/leds-pca9633.c b/drivers/leds/leds-pca963x.c
index aaa1c4a..35d56a6 100644
--- a/drivers/leds/leds-pca9633.c
+++ b/drivers/leds/leds-pca963x.c
@@ -21,7 +21,7 @@
  * in identical fashion.  The delay_on/delay_off values of the last LED
  * that is set to blink will be used for all of the blinking LEDs.
  * Hardware blinking is disabled by default but can be enabled by setting
- * the 'blink_type' member in the platform_data struct to 'PCA9633_HW_BLINK'
+ * the 'blink_type' member in the platform_data struct to 'PCA963X_HW_BLINK'
  * or by adding the 'nxp,hw-blink' property to the DTS.
  */
 
@@ -35,33 +35,33 @@
 #include <linux/workqueue.h>
 #include <linux/slab.h>
 #include <linux/of.h>
-#include <linux/platform_data/leds-pca9633.h>
+#include <linux/platform_data/leds-pca963x.h>
 
 /* LED select registers determine the source that drives LED outputs */
-#define PCA9633_LED_OFF		0x0	/* LED driver off */
-#define PCA9633_LED_ON		0x1	/* LED driver on */
-#define PCA9633_LED_PWM		0x2	/* Controlled through PWM */
-#define PCA9633_LED_GRP_PWM	0x3	/* Controlled through PWM/GRPPWM */
+#define PCA963X_LED_OFF		0x0	/* LED driver off */
+#define PCA963X_LED_ON		0x1	/* LED driver on */
+#define PCA963X_LED_PWM		0x2	/* Controlled through PWM */
+#define PCA963X_LED_GRP_PWM	0x3	/* Controlled through PWM/GRPPWM */
 
-#define PCA9633_MODE2_DMBLNK	0x20	/* Enable blinking */
+#define PCA963X_MODE2_DMBLNK	0x20	/* Enable blinking */
 
-#define PCA9633_MODE1		0x00
-#define PCA9633_MODE2		0x01
-#define PCA9633_PWM_BASE	0x02
+#define PCA963X_MODE1		0x00
+#define PCA963X_MODE2		0x01
+#define PCA963X_PWM_BASE	0x02
 
-enum pca9633_type {
+enum pca963x_type {
 	pca9633,
 	pca9634,
 };
 
-struct pca9633_chipdef {
+struct pca963x_chipdef {
 	u8			grppwm;
 	u8			grpfreq;
 	u8			ledout_base;
 	int			n_leds;
 };
 
-static struct pca9633_chipdef pca9633_chipdefs[] = {
+static struct pca963x_chipdef pca963x_chipdefs[] = {
 	[pca9633] = {
 		.grppwm		= 0x6,
 		.grpfreq	= 0x7,
@@ -77,141 +77,141 @@ static struct pca9633_chipdef pca9633_chipdefs[] = {
 };
 
 /* Total blink period in milliseconds */
-#define PCA9632_BLINK_PERIOD_MIN	42
-#define PCA9632_BLINK_PERIOD_MAX	10667
+#define PCA963X_BLINK_PERIOD_MIN	42
+#define PCA963X_BLINK_PERIOD_MAX	10667
 
-static const struct i2c_device_id pca9633_id[] = {
+static const struct i2c_device_id pca963x_id[] = {
 	{ "pca9632", pca9633 },
 	{ "pca9633", pca9633 },
 	{ "pca9634", pca9634 },
 	{ }
 };
-MODULE_DEVICE_TABLE(i2c, pca9633_id);
+MODULE_DEVICE_TABLE(i2c, pca963x_id);
 
-enum pca9633_cmd {
+enum pca963x_cmd {
 	BRIGHTNESS_SET,
 	BLINK_SET,
 };
 
-struct pca9633_led;
+struct pca963x_led;
 
-struct pca9633 {
-	struct pca9633_chipdef *chipdef;
+struct pca963x {
+	struct pca963x_chipdef *chipdef;
 	struct mutex mutex;
 	struct i2c_client *client;
-	struct pca9633_led *leds;
+	struct pca963x_led *leds;
 };
 
-struct pca9633_led {
-	struct pca9633 *chip;
+struct pca963x_led {
+	struct pca963x *chip;
 	struct work_struct work;
 	enum led_brightness brightness;
 	struct led_classdev led_cdev;
 	int led_num; /* 0 .. 7 potentially */
-	enum pca9633_cmd cmd;
+	enum pca963x_cmd cmd;
 	char name[32];
 	u8 gdc;
 	u8 gfrq;
 };
 
-static void pca9633_brightness_work(struct pca9633_led *pca9633)
+static void pca963x_brightness_work(struct pca963x_led *pca963x)
 {
-	u8 ledout_addr = pca9633->chip->chipdef->ledout_base
-		+ (pca9633->led_num / 4);
+	u8 ledout_addr = pca963x->chip->chipdef->ledout_base
+		+ (pca963x->led_num / 4);
 	u8 ledout;
-	int shift = 2 * (pca9633->led_num % 4);
+	int shift = 2 * (pca963x->led_num % 4);
 	u8 mask = 0x3 << shift;
 
-	mutex_lock(&pca9633->chip->mutex);
-	ledout = i2c_smbus_read_byte_data(pca9633->chip->client, ledout_addr);
-	switch (pca9633->brightness) {
+	mutex_lock(&pca963x->chip->mutex);
+	ledout = i2c_smbus_read_byte_data(pca963x->chip->client, ledout_addr);
+	switch (pca963x->brightness) {
 	case LED_FULL:
-		i2c_smbus_write_byte_data(pca9633->chip->client, ledout_addr,
-			(ledout & ~mask) | (PCA9633_LED_ON << shift));
+		i2c_smbus_write_byte_data(pca963x->chip->client, ledout_addr,
+			(ledout & ~mask) | (PCA963X_LED_ON << shift));
 		break;
 	case LED_OFF:
-		i2c_smbus_write_byte_data(pca9633->chip->client, ledout_addr,
+		i2c_smbus_write_byte_data(pca963x->chip->client, ledout_addr,
 			ledout & ~mask);
 		break;
 	default:
-		i2c_smbus_write_byte_data(pca9633->chip->client,
-			PCA9633_PWM_BASE + pca9633->led_num,
-			pca9633->brightness);
-		i2c_smbus_write_byte_data(pca9633->chip->client, ledout_addr,
-			(ledout & ~mask) | (PCA9633_LED_PWM << shift));
+		i2c_smbus_write_byte_data(pca963x->chip->client,
+			PCA963X_PWM_BASE + pca963x->led_num,
+			pca963x->brightness);
+		i2c_smbus_write_byte_data(pca963x->chip->client, ledout_addr,
+			(ledout & ~mask) | (PCA963X_LED_PWM << shift));
 		break;
 	}
-	mutex_unlock(&pca9633->chip->mutex);
+	mutex_unlock(&pca963x->chip->mutex);
 }
 
-static void pca9633_blink_work(struct pca9633_led *pca9633)
+static void pca963x_blink_work(struct pca963x_led *pca963x)
 {
-	u8 ledout_addr = pca9633->chip->chipdef->ledout_base +
-		(pca9633->led_num / 4);
+	u8 ledout_addr = pca963x->chip->chipdef->ledout_base +
+		(pca963x->led_num / 4);
 	u8 ledout;
-	u8 mode2 = i2c_smbus_read_byte_data(pca9633->chip->client,
-							PCA9633_MODE2);
-	int shift = 2 * (pca9633->led_num % 4);
+	u8 mode2 = i2c_smbus_read_byte_data(pca963x->chip->client,
+							PCA963X_MODE2);
+	int shift = 2 * (pca963x->led_num % 4);
 	u8 mask = 0x3 << shift;
 
-	i2c_smbus_write_byte_data(pca9633->chip->client,
-			pca9633->chip->chipdef->grppwm,	pca9633->gdc);
+	i2c_smbus_write_byte_data(pca963x->chip->client,
+			pca963x->chip->chipdef->grppwm,	pca963x->gdc);
 
-	i2c_smbus_write_byte_data(pca9633->chip->client,
-			pca9633->chip->chipdef->grpfreq, pca9633->gfrq);
+	i2c_smbus_write_byte_data(pca963x->chip->client,
+			pca963x->chip->chipdef->grpfreq, pca963x->gfrq);
 
-	if (!(mode2 & PCA9633_MODE2_DMBLNK))
-		i2c_smbus_write_byte_data(pca9633->chip->client, PCA9633_MODE2,
-			mode2 | PCA9633_MODE2_DMBLNK);
+	if (!(mode2 & PCA963X_MODE2_DMBLNK))
+		i2c_smbus_write_byte_data(pca963x->chip->client, PCA963X_MODE2,
+			mode2 | PCA963X_MODE2_DMBLNK);
 
-	mutex_lock(&pca9633->chip->mutex);
-	ledout = i2c_smbus_read_byte_data(pca9633->chip->client, ledout_addr);
-	if ((ledout & mask) != (PCA9633_LED_GRP_PWM << shift))
-		i2c_smbus_write_byte_data(pca9633->chip->client, ledout_addr,
-			(ledout & ~mask) | (PCA9633_LED_GRP_PWM << shift));
-	mutex_unlock(&pca9633->chip->mutex);
+	mutex_lock(&pca963x->chip->mutex);
+	ledout = i2c_smbus_read_byte_data(pca963x->chip->client, ledout_addr);
+	if ((ledout & mask) != (PCA963X_LED_GRP_PWM << shift))
+		i2c_smbus_write_byte_data(pca963x->chip->client, ledout_addr,
+			(ledout & ~mask) | (PCA963X_LED_GRP_PWM << shift));
+	mutex_unlock(&pca963x->chip->mutex);
 }
 
-static void pca9633_work(struct work_struct *work)
+static void pca963x_work(struct work_struct *work)
 {
-	struct pca9633_led *pca9633 = container_of(work,
-		struct pca9633_led, work);
+	struct pca963x_led *pca963x = container_of(work,
+		struct pca963x_led, work);
 
-	switch (pca9633->cmd) {
+	switch (pca963x->cmd) {
 	case BRIGHTNESS_SET:
-		pca9633_brightness_work(pca9633);
+		pca963x_brightness_work(pca963x);
 		break;
 	case BLINK_SET:
-		pca9633_blink_work(pca9633);
+		pca963x_blink_work(pca963x);
 		break;
 	}
 }
 
-static void pca9633_led_set(struct led_classdev *led_cdev,
+static void pca963x_led_set(struct led_classdev *led_cdev,
 	enum led_brightness value)
 {
-	struct pca9633_led *pca9633;
+	struct pca963x_led *pca963x;
 
-	pca9633 = container_of(led_cdev, struct pca9633_led, led_cdev);
+	pca963x = container_of(led_cdev, struct pca963x_led, led_cdev);
 
-	pca9633->cmd = BRIGHTNESS_SET;
-	pca9633->brightness = value;
+	pca963x->cmd = BRIGHTNESS_SET;
+	pca963x->brightness = value;
 
 	/*
 	 * Must use workqueue for the actual I/O since I2C operations
 	 * can sleep.
 	 */
-	schedule_work(&pca9633->work);
+	schedule_work(&pca963x->work);
 }
 
-static int pca9633_blink_set(struct led_classdev *led_cdev,
+static int pca963x_blink_set(struct led_classdev *led_cdev,
 		unsigned long *delay_on, unsigned long *delay_off)
 {
-	struct pca9633_led *pca9633;
+	struct pca963x_led *pca963x;
 	unsigned long time_on, time_off, period;
 	u8 gdc, gfrq;
 
-	pca9633 = container_of(led_cdev, struct pca9633_led, led_cdev);
+	pca963x = container_of(led_cdev, struct pca963x_led, led_cdev);
 
 	time_on = *delay_on;
 	time_off = *delay_off;
@@ -225,8 +225,8 @@ static int pca9633_blink_set(struct led_classdev *led_cdev,
 	period = time_on + time_off;
 
 	/* If period not supported by hardware, default to someting sane. */
-	if ((period < PCA9632_BLINK_PERIOD_MIN) ||
-	    (period > PCA9632_BLINK_PERIOD_MAX)) {
+	if ((period < PCA963X_BLINK_PERIOD_MIN) ||
+	    (period > PCA963X_BLINK_PERIOD_MAX)) {
 		time_on = 500;
 		time_off = 500;
 		period = time_on + time_off;
@@ -246,15 +246,15 @@ static int pca9633_blink_set(struct led_classdev *led_cdev,
 	 */
 	gfrq = (period * 24 / 1000) - 1;
 
-	pca9633->cmd = BLINK_SET;
-	pca9633->gdc = gdc;
-	pca9633->gfrq = gfrq;
+	pca963x->cmd = BLINK_SET;
+	pca963x->gdc = gdc;
+	pca963x->gfrq = gfrq;
 
 	/*
 	 * Must use workqueue for the actual I/O since I2C operations
 	 * can sleep.
 	 */
-	schedule_work(&pca9633->work);
+	schedule_work(&pca963x->work);
 
 	*delay_on = time_on;
 	*delay_off = time_off;
@@ -263,21 +263,21 @@ static int pca9633_blink_set(struct led_classdev *led_cdev,
 }
 
 #if IS_ENABLED(CONFIG_OF)
-static struct pca9633_platform_data *
-pca9633_dt_init(struct i2c_client *client, struct pca9633_chipdef *chip)
+static struct pca963x_platform_data *
+pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
 {
 	struct device_node *np = client->dev.of_node, *child;
-	struct pca9633_platform_data *pdata;
-	struct led_info *pca9633_leds;
+	struct pca963x_platform_data *pdata;
+	struct led_info *pca963x_leds;
 	int count;
 
 	count = of_get_child_count(np);
 	if (!count || count > chip->n_leds)
 		return ERR_PTR(-ENODEV);
 
-	pca9633_leds = devm_kzalloc(&client->dev,
+	pca963x_leds = devm_kzalloc(&client->dev,
 			sizeof(struct led_info) * chip->n_leds, GFP_KERNEL);
-	if (!pca9633_leds)
+	if (!pca963x_leds)
 		return ERR_PTR(-ENOMEM);
 
 	for_each_child_of_node(np, child) {
@@ -292,59 +292,59 @@ pca9633_dt_init(struct i2c_client *client, struct pca9633_chipdef *chip)
 		res = of_property_read_u32(child, "reg", &reg);
 		if (res != 0)
 			continue;
-		pca9633_leds[reg] = led;
+		pca963x_leds[reg] = led;
 	}
 	pdata = devm_kzalloc(&client->dev,
-			     sizeof(struct pca9633_platform_data), GFP_KERNEL);
+			     sizeof(struct pca963x_platform_data), GFP_KERNEL);
 	if (!pdata)
 		return ERR_PTR(-ENOMEM);
 
-	pdata->leds.leds = pca9633_leds;
+	pdata->leds.leds = pca963x_leds;
 	pdata->leds.num_leds = count;
 
 	/* default to open-drain unless totem pole (push-pull) is specified */
 	if (of_property_read_bool(np, "nxp,totem-pole"))
-		pdata->outdrv = PCA9633_TOTEM_POLE;
+		pdata->outdrv = PCA963X_TOTEM_POLE;
 	else
-		pdata->outdrv = PCA9633_OPEN_DRAIN;
+		pdata->outdrv = PCA963X_OPEN_DRAIN;
 
 	/* default to software blinking unless hardware blinking is specified */
 	if (of_property_read_bool(np, "nxp,hw-blink"))
-		pdata->blink_type = PCA9633_HW_BLINK;
+		pdata->blink_type = PCA963X_HW_BLINK;
 	else
-		pdata->blink_type = PCA9633_SW_BLINK;
+		pdata->blink_type = PCA963X_SW_BLINK;
 
 	return pdata;
 }
 
-static const struct of_device_id of_pca9633_match[] = {
+static const struct of_device_id of_pca963x_match[] = {
 	{ .compatible = "nxp,pca9632", },
 	{ .compatible = "nxp,pca9633", },
 	{ .compatible = "nxp,pca9634", },
 	{},
 };
 #else
-static struct pca9633_platform_data *
-pca9633_dt_init(struct i2c_client *client, struct pca9633_chipdef *chip)
+static struct pca963x_platform_data *
+pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
 {
 	return ERR_PTR(-ENODEV);
 }
 #endif
 
-static int pca9633_probe(struct i2c_client *client,
+static int pca963x_probe(struct i2c_client *client,
 					const struct i2c_device_id *id)
 {
-	struct pca9633 *pca9633_chip;
-	struct pca9633_led *pca9633;
-	struct pca9633_platform_data *pdata;
-	struct pca9633_chipdef *chip;
+	struct pca963x *pca963x_chip;
+	struct pca963x_led *pca963x;
+	struct pca963x_platform_data *pdata;
+	struct pca963x_chipdef *chip;
 	int i, err;
 
-	chip = &pca9633_chipdefs[id->driver_data];
+	chip = &pca963x_chipdefs[id->driver_data];
 	pdata = dev_get_platdata(&client->dev);
 
 	if (!pdata) {
-		pdata = pca9633_dt_init(client, chip);
+		pdata = pca963x_dt_init(client, chip);
 		if (IS_ERR(pdata)) {
 			dev_warn(&client->dev, "could not parse configuration\n");
 			pdata = NULL;
@@ -358,21 +358,21 @@ static int pca9633_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
-	pca9633_chip = devm_kzalloc(&client->dev, sizeof(*pca9633_chip),
+	pca963x_chip = devm_kzalloc(&client->dev, sizeof(*pca963x_chip),
 								GFP_KERNEL);
-	if (!pca9633_chip)
+	if (!pca963x_chip)
 		return -ENOMEM;
-	pca9633 = devm_kzalloc(&client->dev, chip->n_leds * sizeof(*pca9633),
+	pca963x = devm_kzalloc(&client->dev, chip->n_leds * sizeof(*pca963x),
 								GFP_KERNEL);
-	if (!pca9633)
+	if (!pca963x)
 		return -ENOMEM;
 
-	i2c_set_clientdata(client, pca9633_chip);
+	i2c_set_clientdata(client, pca963x_chip);
 
-	mutex_init(&pca9633_chip->mutex);
-	pca9633_chip->chipdef = chip;
-	pca9633_chip->client = client;
-	pca9633_chip->leds = pca9633;
+	mutex_init(&pca963x_chip->mutex);
+	pca963x_chip->chipdef = chip;
+	pca963x_chip->client = client;
+	pca963x_chip->leds = pca963x;
 
 	/* Turn off LEDs by default*/
 	i2c_smbus_write_byte_data(client, chip->ledout_base, 0x00);
@@ -380,82 +380,82 @@ static int pca9633_probe(struct i2c_client *client,
 		i2c_smbus_write_byte_data(client, chip->ledout_base + 1, 0x00);
 
 	for (i = 0; i < chip->n_leds; i++) {
-		pca9633[i].led_num = i;
-		pca9633[i].chip = pca9633_chip;
+		pca963x[i].led_num = i;
+		pca963x[i].chip = pca963x_chip;
 
 		/* Platform data can specify LED names and default triggers */
 		if (pdata && i < pdata->leds.num_leds) {
 			if (pdata->leds.leds[i].name)
-				snprintf(pca9633[i].name,
-					 sizeof(pca9633[i].name), "pca9633:%s",
+				snprintf(pca963x[i].name,
+					 sizeof(pca963x[i].name), "pca963x:%s",
 					 pdata->leds.leds[i].name);
 			if (pdata->leds.leds[i].default_trigger)
-				pca9633[i].led_cdev.default_trigger =
+				pca963x[i].led_cdev.default_trigger =
 					pdata->leds.leds[i].default_trigger;
 		}
 		if (!pdata || i >= pdata->leds.num_leds ||
 						!pdata->leds.leds[i].name)
-			snprintf(pca9633[i].name, sizeof(pca9633[i].name),
-				 "pca9633:%d:%.2x:%d", client->adapter->nr,
+			snprintf(pca963x[i].name, sizeof(pca963x[i].name),
+				 "pca963x:%d:%.2x:%d", client->adapter->nr,
 				 client->addr, i);
 
-		pca9633[i].led_cdev.name = pca9633[i].name;
-		pca9633[i].led_cdev.brightness_set = pca9633_led_set;
+		pca963x[i].led_cdev.name = pca963x[i].name;
+		pca963x[i].led_cdev.brightness_set = pca963x_led_set;
 
-		if (pdata && pdata->blink_type == PCA9633_HW_BLINK)
-			pca9633[i].led_cdev.blink_set = pca9633_blink_set;
+		if (pdata && pdata->blink_type == PCA963X_HW_BLINK)
+			pca963x[i].led_cdev.blink_set = pca963x_blink_set;
 
-		INIT_WORK(&pca9633[i].work, pca9633_work);
+		INIT_WORK(&pca963x[i].work, pca963x_work);
 
-		err = led_classdev_register(&client->dev, &pca9633[i].led_cdev);
+		err = led_classdev_register(&client->dev, &pca963x[i].led_cdev);
 		if (err < 0)
 			goto exit;
 	}
 
 	/* Disable LED all-call address and set normal mode */
-	i2c_smbus_write_byte_data(client, PCA9633_MODE1, 0x00);
+	i2c_smbus_write_byte_data(client, PCA963X_MODE1, 0x00);
 
 	/* Configure output: open-drain or totem pole (push-pull) */
-	if (pdata && pdata->outdrv == PCA9633_OPEN_DRAIN)
-		i2c_smbus_write_byte_data(client, PCA9633_MODE2, 0x01);
+	if (pdata && pdata->outdrv == PCA963X_OPEN_DRAIN)
+		i2c_smbus_write_byte_data(client, PCA963X_MODE2, 0x01);
 
 	return 0;
 
 exit:
 	while (i--) {
-		led_classdev_unregister(&pca9633[i].led_cdev);
-		cancel_work_sync(&pca9633[i].work);
+		led_classdev_unregister(&pca963x[i].led_cdev);
+		cancel_work_sync(&pca963x[i].work);
 	}
 
 	return err;
 }
 
-static int pca9633_remove(struct i2c_client *client)
+static int pca963x_remove(struct i2c_client *client)
 {
-	struct pca9633 *pca9633 = i2c_get_clientdata(client);
+	struct pca963x *pca963x = i2c_get_clientdata(client);
 	int i;
 
-	for (i = 0; i < pca9633->chipdef->n_leds; i++) {
-		led_classdev_unregister(&pca9633->leds[i].led_cdev);
-		cancel_work_sync(&pca9633->leds[i].work);
+	for (i = 0; i < pca963x->chipdef->n_leds; i++) {
+		led_classdev_unregister(&pca963x->leds[i].led_cdev);
+		cancel_work_sync(&pca963x->leds[i].work);
 	}
 
 	return 0;
 }
 
-static struct i2c_driver pca9633_driver = {
+static struct i2c_driver pca963x_driver = {
 	.driver = {
-		.name	= "leds-pca9633",
+		.name	= "leds-pca963x",
 		.owner	= THIS_MODULE,
-		.of_match_table = of_match_ptr(of_pca9633_match),
+		.of_match_table = of_match_ptr(of_pca963x_match),
 	},
-	.probe	= pca9633_probe,
-	.remove	= pca9633_remove,
-	.id_table = pca9633_id,
+	.probe	= pca963x_probe,
+	.remove	= pca963x_remove,
+	.id_table = pca963x_id,
 };
 
-module_i2c_driver(pca9633_driver);
+module_i2c_driver(pca963x_driver);
 
 MODULE_AUTHOR("Peter Meerwald <p.meerwald@bct-electronic.com>");
-MODULE_DESCRIPTION("PCA9633 LED driver");
+MODULE_DESCRIPTION("PCA963X LED driver");
 MODULE_LICENSE("GPL v2");