summaryrefslogtreecommitdiffstats
path: root/drivers/leds
diff options
context:
space:
mode:
authorH Hartley Sweeten <hartleys@visionengravers.com>2010-01-20 16:08:30 -0700
committerRichard Purdie <rpurdie@linux.intel.com>2010-03-16 19:49:21 +0000
commitd09e16664be88dc8463fe7508a2123460bf6d676 (patch)
tree892f39600b791a1cc88637381c084b3d49e26192 /drivers/leds
parentbb9b6ef70f08f256ab4b8ec127c17ee629b85350 (diff)
downloadop-kernel-dev-d09e16664be88dc8463fe7508a2123460bf6d676.zip
op-kernel-dev-d09e16664be88dc8463fe7508a2123460bf6d676.tar.gz
leds: Kconfig cleanup
Remove the need for "depends on LEDS_CLASS" by wrapping the affected config options in an if/endif block. Similar for "depends on LEDS_TRIGGERS". LEDS_COBALT_RAQ still has a "depends on LEDS_CLASS=y" since it cannot be selected to build as a module. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Diffstat (limited to 'drivers/leds')
-rw-r--r--drivers/leds/Kconfig75
1 files changed, 39 insertions, 36 deletions
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 023eda6..d86e1a3 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -15,6 +15,8 @@ config LEDS_CLASS
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
+if LEDS_CLASS
+
comment "LED drivers"
config LEDS_88PM860X
@@ -26,73 +28,73 @@ config LEDS_88PM860X
config LEDS_ATMEL_PWM
tristate "LED Support using Atmel PWM outputs"
- depends on LEDS_CLASS && ATMEL_PWM
+ depends on ATMEL_PWM
help
This option enables support for LEDs driven using outputs
of the dedicated PWM controller found on newer Atmel SOCs.
config LEDS_LOCOMO
tristate "LED Support for Locomo device"
- depends on LEDS_CLASS && SHARP_LOCOMO
+ depends on SHARP_LOCOMO
help
This option enables support for the LEDs on Sharp Locomo.
Zaurus models SL-5500 and SL-5600.
config LEDS_MIKROTIK_RB532
tristate "LED Support for Mikrotik Routerboard 532"
- depends on LEDS_CLASS && MIKROTIK_RB532
+ depends on MIKROTIK_RB532
help
This option enables support for the so called "User LED" of
Mikrotik's Routerboard 532.
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
- depends on LEDS_CLASS && ARCH_S3C2410
+ depends on ARCH_S3C2410
help
This option enables support for LEDs connected to GPIO lines
on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
config LEDS_AMS_DELTA
tristate "LED Support for the Amstrad Delta (E3)"
- depends on LEDS_CLASS && MACH_AMS_DELTA
+ depends on MACH_AMS_DELTA
help
This option enables support for the LEDs on Amstrad Delta (E3).
config LEDS_NET48XX
tristate "LED Support for Soekris net48xx series Error LED"
- depends on LEDS_CLASS && SCx200_GPIO
+ depends on SCx200_GPIO
help
This option enables support for the Soekris net4801 and net4826 error
LED.
config LEDS_FSG
tristate "LED Support for the Freecom FSG-3"
- depends on LEDS_CLASS && MACH_FSG
+ depends on MACH_FSG
help
This option enables support for the LEDs on the Freecom FSG-3.
config LEDS_WRAP
tristate "LED Support for the WRAP series LEDs"
- depends on LEDS_CLASS && SCx200_GPIO
+ depends on SCx200_GPIO
help
This option enables support for the PCEngines WRAP programmable LEDs.
config LEDS_ALIX2
tristate "LED Support for ALIX.2 and ALIX.3 series"
- depends on LEDS_CLASS && X86 && !GPIO_CS5535 && !CS5535_GPIO
+ depends on X86 && !GPIO_CS5535 && !CS5535_GPIO
help
This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
You have to set leds-alix2.force=1 for boards with Award BIOS.
config LEDS_H1940
tristate "LED Support for iPAQ H1940 device"
- depends on LEDS_CLASS && ARCH_H1940
+ depends on ARCH_H1940
help
This option enables support for the LEDs on the h1940.
config LEDS_COBALT_QUBE
tristate "LED Support for the Cobalt Qube series front LED"
- depends on LEDS_CLASS && MIPS_COBALT
+ depends on MIPS_COBALT
help
This option enables support for the front LED on Cobalt Qube series
@@ -105,7 +107,7 @@ config LEDS_COBALT_RAQ
config LEDS_SUNFIRE
tristate "LED support for SunFire servers."
- depends on LEDS_CLASS && SPARC64
+ depends on SPARC64
select LEDS_TRIGGERS
help
This option enables support for the Left, Middle, and Right
@@ -113,14 +115,14 @@ config LEDS_SUNFIRE
config LEDS_HP6XX
tristate "LED Support for the HP Jornada 6xx"
- depends on LEDS_CLASS && SH_HP6XX
+ depends on SH_HP6XX
help
This option enables LED support for the handheld
HP Jornada 620/660/680/690.
config LEDS_PCA9532
tristate "LED driver for PCA9532 dimmer"
- depends on LEDS_CLASS && I2C && INPUT && EXPERIMENTAL
+ depends on I2C && INPUT && EXPERIMENTAL
help
This option enables support for NXP pca9532
LED controller. It is generally only useful
@@ -128,7 +130,7 @@ config LEDS_PCA9532
config LEDS_GPIO
tristate "LED Support for GPIO connected LEDs"
- depends on LEDS_CLASS && GENERIC_GPIO
+ depends on GENERIC_GPIO
help
This option enables support for the LEDs connected to GPIO
outputs. To be useful the particular board must have LEDs
@@ -155,7 +157,7 @@ config LEDS_GPIO_OF
config LEDS_LP3944
tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
- depends on LEDS_CLASS && I2C
+ depends on I2C
help
This option enables support for LEDs connected to the National
Semiconductor LP3944 Lighting Management Unit (LMU) also known as
@@ -166,7 +168,7 @@ config LEDS_LP3944
config LEDS_CLEVO_MAIL
tristate "Mail LED on Clevo notebook"
- depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI
+ depends on X86 && SERIO_I8042 && DMI
help
This driver makes the mail LED accessible from userspace
programs through the leds subsystem. This LED have three
@@ -196,7 +198,7 @@ config LEDS_CLEVO_MAIL
config LEDS_PCA955X
tristate "LED Support for PCA955x I2C chips"
- depends on LEDS_CLASS && I2C
+ depends on I2C
help
This option enables support for LEDs connected to PCA955x
LED driver chips accessed via the I2C bus. Supported
@@ -204,54 +206,54 @@ config LEDS_PCA955X
config LEDS_WM831X_STATUS
tristate "LED support for status LEDs on WM831x PMICs"
- depends on LEDS_CLASS && MFD_WM831X
+ depends on MFD_WM831X
help
This option enables support for the status LEDs of the WM831x
series of PMICs.
config LEDS_WM8350
tristate "LED Support for WM8350 AudioPlus PMIC"
- depends on LEDS_CLASS && MFD_WM8350
+ depends on MFD_WM8350
help
This option enables support for LEDs driven by the Wolfson
Microelectronics WM8350 AudioPlus PMIC.
config LEDS_DA903X
tristate "LED Support for DA9030/DA9034 PMIC"
- depends on LEDS_CLASS && PMIC_DA903X
+ depends on PMIC_DA903X
help
This option enables support for on-chip LED drivers found
on Dialog Semiconductor DA9030/DA9034 PMICs.
config LEDS_DAC124S085
tristate "LED Support for DAC124S085 SPI DAC"
- depends on LEDS_CLASS && SPI
+ depends on SPI
help
This option enables support for DAC124S085 SPI DAC from NatSemi,
which can be used to control up to four LEDs.
config LEDS_PWM
tristate "PWM driven LED Support"
- depends on LEDS_CLASS && HAVE_PWM
+ depends on HAVE_PWM
help
This option enables support for pwm driven LEDs
config LEDS_REGULATOR
tristate "REGULATOR driven LED support"
- depends on LEDS_CLASS && REGULATOR
+ depends on REGULATOR
help
This option enables support for regulator driven LEDs.
config LEDS_BD2802
tristate "LED driver for BD2802 RGB LED"
- depends on LEDS_CLASS && I2C
+ depends on I2C
help
This option enables support for BD2802GU RGB LED driver chips
accessed via the I2C bus.
config LEDS_INTEL_SS4200
tristate "LED driver for Intel NAS SS4200 series"
- depends on LEDS_CLASS && PCI && DMI
+ depends on PCI && DMI
help
This option enables support for the Intel SS4200 series of
Network Attached Storage servers. You may control the hard
@@ -260,7 +262,7 @@ config LEDS_INTEL_SS4200
config LEDS_LT3593
tristate "LED driver for LT3593 controllers"
- depends on LEDS_CLASS && GENERIC_GPIO
+ depends on GENERIC_GPIO
help
This option enables support for LEDs driven by a Linear Technology
LT3593 controller. This controller uses a special one-wire pulse
@@ -268,7 +270,7 @@ config LEDS_LT3593
config LEDS_ADP5520
tristate "LED Support for ADP5520/ADP5501 PMIC"
- depends on LEDS_CLASS && PMIC_ADP5520
+ depends on PMIC_ADP5520
help
This option enables support for on-chip LED drivers found
on Analog Devices ADP5520/ADP5501 PMICs.
@@ -276,8 +278,6 @@ config LEDS_ADP5520
To compile this driver as a module, choose M here: the module will
be called leds-adp5520.
-comment "LED Triggers"
-
config LEDS_TRIGGERS
bool "LED Trigger support"
help
@@ -285,9 +285,12 @@ config LEDS_TRIGGERS
These triggers allow kernel events to drive the LEDs and can
be configured via sysfs. If unsure, say Y.
+if LEDS_TRIGGERS
+
+comment "LED Triggers"
+
config LEDS_TRIGGER_TIMER
tristate "LED Timer Trigger"
- depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a programmable timer
via sysfs. Some LED hardware can be programmed to start
@@ -298,14 +301,13 @@ config LEDS_TRIGGER_TIMER
config LEDS_TRIGGER_IDE_DISK
bool "LED IDE Disk Trigger"
- depends on LEDS_TRIGGERS && IDE_GD_ATA
+ depends on IDE_GD_ATA
help
This allows LEDs to be controlled by IDE disk activity.
If unsure, say Y.
config LEDS_TRIGGER_HEARTBEAT
tristate "LED Heartbeat Trigger"
- depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a CPU load average.
The flash frequency is a hyperbolic function of the 1-minute
@@ -314,7 +316,6 @@ config LEDS_TRIGGER_HEARTBEAT
config LEDS_TRIGGER_BACKLIGHT
tristate "LED backlight Trigger"
- depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled as a backlight device: they
turn off and on when the display is blanked and unblanked.
@@ -323,7 +324,6 @@ config LEDS_TRIGGER_BACKLIGHT
config LEDS_TRIGGER_GPIO
tristate "LED GPIO Trigger"
- depends on LEDS_TRIGGERS
depends on GPIOLIB
help
This allows LEDs to be controlled by gpio events. It's good
@@ -336,7 +336,6 @@ config LEDS_TRIGGER_GPIO
config LEDS_TRIGGER_DEFAULT_ON
tristate "LED Default ON Trigger"
- depends on LEDS_TRIGGERS
help
This allows LEDs to be initialised in the ON state.
If unsure, say Y.
@@ -344,4 +343,8 @@ config LEDS_TRIGGER_DEFAULT_ON
comment "iptables trigger is under Netfilter config (LED target)"
depends on LEDS_TRIGGERS
+endif # LEDS_TRIGGERS
+
+endif # LEDS_CLASS
+
endif # NEW_LEDS
OpenPOWER on IntegriCloud