summaryrefslogtreecommitdiffstats
path: root/drivers/leds
diff options
context:
space:
mode:
authorJoachim Eastwood <manabian@gmail.com>2011-05-24 17:13:23 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2011-05-25 08:39:50 -0700
commit3c1ab50d0a31b27bb4e55168f4901dd91e6e5ea4 (patch)
treea9ec955ad64bda0ff64f5654c1b16eeb79e0d895 /drivers/leds
parentfff26f8141145e01eae8f4d6e642ac8a0d500158 (diff)
downloadop-kernel-dev-3c1ab50d0a31b27bb4e55168f4901dd91e6e5ea4.zip
op-kernel-dev-3c1ab50d0a31b27bb4e55168f4901dd91e6e5ea4.tar.gz
drivers/leds/leds-pca9532.c: add gpio capability
Allow unused leds on pca9532 to be used as gpio. The board I am working on now has no less than 6 pca9532 chips. One chips is used for only leds, one has 14 leds and 2 gpio and the rest of the chips are gpio only. There is also one board in mainline which could use this capabilty; arch/arm/mach-iop32x/n2100.c 232 { .type = PCA9532_TYPE_NONE }, /* power OFF gpio */ 233 { .type = PCA9532_TYPE_NONE }, /* reset gpio */ This patch defines a new pin type, PCA9532_TYPE_GPIO, and registers a gpiochip if any pin has this type set. The gpio will registers all chip pins but will filter on gpio_request. [randy.dunlap@oracle.com: fix build when GPIOLIB is not enabled] Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jan Weitzel <j.weitzel@phytec.de> Cc: Juergen Kilb <j.kilb@phytec.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/leds')
-rw-r--r--drivers/leds/Kconfig10
-rw-r--r--drivers/leds/leds-pca9532.c113
2 files changed, 120 insertions, 3 deletions
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 9bec869..09de8da 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -162,6 +162,16 @@ config LEDS_PCA9532
LED controller. It is generally only useful
as a platform driver
+config LEDS_PCA9532_GPIO
+ bool "Enable GPIO support for PCA9532"
+ depends on LEDS_PCA9532
+ depends on GPIOLIB
+ help
+ Allow unused pins on PCA9532 to be used as gpio.
+
+ To use a pin as gpio pca9532_type in pca9532_platform data needs to
+ set to PCA9532_TYPE_GPIO.
+
config LEDS_GPIO
tristate "LED Support for GPIO connected LEDs"
depends on LEDS_CLASS
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index 5bf63af..ebea856 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -19,7 +19,9 @@
#include <linux/mutex.h>
#include <linux/workqueue.h>
#include <linux/leds-pca9532.h>
+#include <linux/gpio.h>
+#define PCA9532_REG_INPUT(i) ((i)/8)
#define PCA9532_REG_PSC(i) (0x2+(i)*2)
#define PCA9532_REG_PWM(i) (0x3+(i)*2)
#define PCA9532_REG_LS0 0x6
@@ -34,6 +36,9 @@ struct pca9532_data {
struct mutex update_lock;
struct input_dev *idev;
struct work_struct work;
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+ struct gpio_chip gpio;
+#endif
u8 pwm[2];
u8 psc[2];
};
@@ -200,16 +205,68 @@ static void pca9532_led_work(struct work_struct *work)
pca9532_setled(led);
}
-static void pca9532_destroy_devices(struct pca9532_data *data, int n_devs)
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+static int pca9532_gpio_request_pin(struct gpio_chip *gc, unsigned offset)
+{
+ struct pca9532_data *data = container_of(gc, struct pca9532_data, gpio);
+ struct pca9532_led *led = &data->leds[offset];
+
+ if (led->type == PCA9532_TYPE_GPIO)
+ return 0;
+
+ return -EBUSY;
+}
+
+static void pca9532_gpio_set_value(struct gpio_chip *gc, unsigned offset, int val)
+{
+ struct pca9532_data *data = container_of(gc, struct pca9532_data, gpio);
+ struct pca9532_led *led = &data->leds[offset];
+
+ if (val)
+ led->state = PCA9532_ON;
+ else
+ led->state = PCA9532_OFF;
+
+ pca9532_setled(led);
+}
+
+static int pca9532_gpio_get_value(struct gpio_chip *gc, unsigned offset)
+{
+ struct pca9532_data *data = container_of(gc, struct pca9532_data, gpio);
+ unsigned char reg;
+
+ reg = i2c_smbus_read_byte_data(data->client, PCA9532_REG_INPUT(offset));
+
+ return !!(reg & (1 << (offset % 8)));
+}
+
+static int pca9532_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+ /* To use as input ensure pin is not driven */
+ pca9532_gpio_set_value(gc, offset, 0);
+
+ return 0;
+}
+
+static int pca9532_gpio_direction_output(struct gpio_chip *gc, unsigned offset, int val)
+{
+ pca9532_gpio_set_value(gc, offset, val);
+
+ return 0;
+}
+#endif /* CONFIG_LEDS_PCA9532_GPIO */
+
+static int pca9532_destroy_devices(struct pca9532_data *data, int n_devs)
{
int i = n_devs;
if (!data)
- return;
+ return -EINVAL;
while (--i >= 0) {
switch (data->leds[i].type) {
case PCA9532_TYPE_NONE:
+ case PCA9532_TYPE_GPIO:
break;
case PCA9532_TYPE_LED:
led_classdev_unregister(&data->leds[i].ldev);
@@ -224,12 +281,26 @@ static void pca9532_destroy_devices(struct pca9532_data *data, int n_devs)
break;
}
}
+
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+ if (data->gpio.dev) {
+ int err = gpiochip_remove(&data->gpio);
+ if (err) {
+ dev_err(&data->client->dev, "%s failed, %d\n",
+ "gpiochip_remove()", err);
+ return err;
+ }
+ }
+#endif
+
+ return 0;
}
static int pca9532_configure(struct i2c_client *client,
struct pca9532_data *data, struct pca9532_platform_data *pdata)
{
int i, err = 0;
+ int gpios = 0;
for (i = 0; i < 2; i++) {
data->pwm[i] = pdata->pwm[i];
@@ -249,6 +320,9 @@ static int pca9532_configure(struct i2c_client *client,
switch (led->type) {
case PCA9532_TYPE_NONE:
break;
+ case PCA9532_TYPE_GPIO:
+ gpios++;
+ break;
case PCA9532_TYPE_LED:
led->state = pled->state;
led->name = pled->name;
@@ -297,6 +371,34 @@ static int pca9532_configure(struct i2c_client *client,
break;
}
}
+
+#ifdef CONFIG_LEDS_PCA9532_GPIO
+ if (gpios) {
+ data->gpio.label = "gpio-pca9532";
+ data->gpio.direction_input = pca9532_gpio_direction_input;
+ data->gpio.direction_output = pca9532_gpio_direction_output;
+ data->gpio.set = pca9532_gpio_set_value;
+ data->gpio.get = pca9532_gpio_get_value;
+ data->gpio.request = pca9532_gpio_request_pin;
+ data->gpio.can_sleep = 1;
+ data->gpio.base = pdata->gpio_base;
+ data->gpio.ngpio = 16;
+ data->gpio.dev = &client->dev;
+ data->gpio.owner = THIS_MODULE;
+
+ err = gpiochip_add(&data->gpio);
+ if (err) {
+ /* Use data->gpio.dev as a flag for freeing gpiochip */
+ data->gpio.dev = NULL;
+ dev_warn(&client->dev, "could not add gpiochip\n");
+ } else {
+ dev_info(&client->dev, "gpios %i...%i\n",
+ data->gpio.base, data->gpio.base +
+ data->gpio.ngpio - 1);
+ }
+ }
+#endif
+
return 0;
exit:
@@ -337,7 +439,12 @@ static int pca9532_probe(struct i2c_client *client,
static int pca9532_remove(struct i2c_client *client)
{
struct pca9532_data *data = i2c_get_clientdata(client);
- pca9532_destroy_devices(data, 16);
+ int err;
+
+ err = pca9532_destroy_devices(data, 16);
+ if (err)
+ return err;
+
kfree(data);
return 0;
}
OpenPOWER on IntegriCloud