TTY: isdn, remove ISDN_ASYNC_* flags

They are the same as TTY ones. So there is no need to redefine them.
Remove ISDN_ASYNC_* and use only ASYNC_*. Except the MAGIC number, of
course.

While we are there, remove also the SERIAL_TYPE flags which are
unused.

Perhaps we should move the ASYNC flags from serial.h to tty.h given
they are used by the tty layer and tty drivers, not only serial?

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 30 insertions, 29 deletions

diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 27f7092..bcf4bbe 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -11,6 +11,7 @@
 #undef ISDN_TTY_STAT_DEBUG
 
 #include <linux/isdn.h>
+#include <linux/serial.h> /* ASYNC_* flags */
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/mutex.h>
@@ -1036,20 +1037,20 @@ isdn_tty_change_speed(modem_info *info)
 
 	/* CTS flow control flag and modem status interrupts */
 	if (cflag & CRTSCTS) {
-		info->flags |= ISDN_ASYNC_CTS_FLOW;
+		info->flags |= ASYNC_CTS_FLOW;
 	} else
-		info->flags &= ~ISDN_ASYNC_CTS_FLOW;
+		info->flags &= ~ASYNC_CTS_FLOW;
 	if (cflag & CLOCAL)
-		info->flags &= ~ISDN_ASYNC_CHECK_CD;
+		info->flags &= ~ASYNC_CHECK_CD;
 	else {
-		info->flags |= ISDN_ASYNC_CHECK_CD;
+		info->flags |= ASYNC_CHECK_CD;
 	}
 }
 
 static int
 isdn_tty_startup(modem_info *info)
 {
-	if (info->flags & ISDN_ASYNC_INITIALIZED)
+	if (info->flags & ASYNC_INITIALIZED)
 		return 0;
 	isdn_lock_drivers();
 #ifdef ISDN_DEBUG_MODEM_OPEN
@@ -1066,7 +1067,7 @@ isdn_tty_startup(modem_info *info)
 	 */
 	isdn_tty_change_speed(info);
 
-	info->flags |= ISDN_ASYNC_INITIALIZED;
+	info->flags |= ASYNC_INITIALIZED;
 	info->msr |= (UART_MSR_DSR | UART_MSR_CTS);
 	info->send_outstanding = 0;
 	return 0;
@@ -1079,7 +1080,7 @@ isdn_tty_startup(modem_info *info)
 static void
 isdn_tty_shutdown(modem_info *info)
 {
-	if (!(info->flags & ISDN_ASYNC_INITIALIZED))
+	if (!(info->flags & ASYNC_INITIALIZED))
 		return;
 #ifdef ISDN_DEBUG_MODEM_OPEN
 	printk(KERN_DEBUG "Shutting down isdnmodem port %d ....\n", info->line);
@@ -1099,7 +1100,7 @@ isdn_tty_shutdown(modem_info *info)
 	if (info->tty)
 		set_bit(TTY_IO_ERROR, &info->tty->flags);
 
-	info->flags &= ~ISDN_ASYNC_INITIALIZED;
+	info->flags &= ~ASYNC_INITIALIZED;
 }
 
 /* isdn_tty_write() is the main send-routine. It is called from the upper
@@ -1486,11 +1487,11 @@ isdn_tty_block_til_ready(struct tty_struct *tty, struct file *filp, modem_info *
 	 * until it's done, and then try again.
 	 */
 	if (tty_hung_up_p(filp) ||
-	    (info->flags & ISDN_ASYNC_CLOSING)) {
-		if (info->flags & ISDN_ASYNC_CLOSING)
+	    (info->flags & ASYNC_CLOSING)) {
+		if (info->flags & ASYNC_CLOSING)
 			interruptible_sleep_on(&info->close_wait);
 #ifdef MODEM_DO_RESTART
-		if (info->flags & ISDN_ASYNC_HUP_NOTIFY)
+		if (info->flags & ASYNC_HUP_NOTIFY)
 			return -EAGAIN;
 		else
 			return -ERESTARTSYS;
@@ -1504,7 +1505,7 @@ isdn_tty_block_til_ready(struct tty_struct *tty, struct file *filp, modem_info *
 	 */
 	if ((filp->f_flags & O_NONBLOCK) ||
 	    (tty->flags & (1 << TTY_IO_ERROR))) {
-		info->flags |= ISDN_ASYNC_NORMAL_ACTIVE;
+		info->flags |= ASYNC_NORMAL_ACTIVE;
 		return 0;
 	}
 	if (tty->termios->c_cflag & CLOCAL)
@@ -1528,9 +1529,9 @@ isdn_tty_block_til_ready(struct tty_struct *tty, struct file *filp, modem_info *
 	while (1) {
 		set_current_state(TASK_INTERRUPTIBLE);
 		if (tty_hung_up_p(filp) ||
-		    !(info->flags & ISDN_ASYNC_INITIALIZED)) {
+		    !(info->flags & ASYNC_INITIALIZED)) {
 #ifdef MODEM_DO_RESTART
-			if (info->flags & ISDN_ASYNC_HUP_NOTIFY)
+			if (info->flags & ASYNC_HUP_NOTIFY)
 				retval = -EAGAIN;
 			else
 				retval = -ERESTARTSYS;
@@ -1539,7 +1540,7 @@ isdn_tty_block_til_ready(struct tty_struct *tty, struct file *filp, modem_info *
 #endif
 			break;
 		}
-		if (!(info->flags & ISDN_ASYNC_CLOSING) &&
+		if (!(info->flags & ASYNC_CLOSING) &&
 		    (do_clocal || (info->msr & UART_MSR_DCD))) {
 			break;
 		}
@@ -1564,7 +1565,7 @@ isdn_tty_block_til_ready(struct tty_struct *tty, struct file *filp, modem_info *
 #endif
 	if (retval)
 		return retval;
-	info->flags |= ISDN_ASYNC_NORMAL_ACTIVE;
+	info->flags |= ASYNC_NORMAL_ACTIVE;
 	return 0;
 }
 
@@ -1661,7 +1662,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
 		module_put(info->owner);
 		return;
 	}
-	info->flags |= ISDN_ASYNC_CLOSING;
+	info->flags |= ASYNC_CLOSING;
 
 	tty->closing = 1;
 	/*
@@ -1670,7 +1671,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
 	 * interrupt driver to stop checking the data ready bit in the
 	 * line status register.
 	 */
-	if (info->flags & ISDN_ASYNC_INITIALIZED) {
+	if (info->flags & ASYNC_INITIALIZED) {
 		tty_wait_until_sent_from_close(tty, 3000);	/* 30 seconds timeout */
 		/*
 		 * Before we drop DTR, make sure the UART transmitter
@@ -1696,7 +1697,7 @@ isdn_tty_close(struct tty_struct *tty, struct file *filp)
 		msleep_interruptible(500);
 		wake_up_interruptible(&info->open_wait);
 	}
-	info->flags &= ~(ISDN_ASYNC_NORMAL_ACTIVE | ISDN_ASYNC_CLOSING);
+	info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
 	wake_up_interruptible(&info->close_wait);
 #ifdef ISDN_DEBUG_MODEM_OPEN
 	printk(KERN_DEBUG "isdn_tty_close normal exit\n");
@@ -1715,7 +1716,7 @@ isdn_tty_hangup(struct tty_struct *tty)
 		return;
 	isdn_tty_shutdown(info);
 	info->count = 0;
-	info->flags &= ~ISDN_ASYNC_NORMAL_ACTIVE;
+	info->flags &= ~ASYNC_NORMAL_ACTIVE;
 	info->tty = NULL;
 	wake_up_interruptible(&info->open_wait);
 }
@@ -2061,7 +2062,7 @@ isdn_tty_find_icall(int di, int ch, setup_parm *setup)
 #endif
 			if (
 #ifndef FIX_FILE_TRANSFER
-				(info->flags & ISDN_ASYNC_NORMAL_ACTIVE) &&
+				(info->flags & ASYNC_NORMAL_ACTIVE) &&
 #endif
 				(info->isdn_driver == -1) &&
 				(info->isdn_channel == -1) &&
@@ -2100,7 +2101,7 @@ isdn_tty_find_icall(int di, int ch, setup_parm *setup)
 	return (wret == 2) ? 3 : 0;
 }
 
-#define TTY_IS_ACTIVE(info)	(info->flags & ISDN_ASYNC_NORMAL_ACTIVE)
+#define TTY_IS_ACTIVE(info)	(info->flags & ASYNC_NORMAL_ACTIVE)
 
 int
 isdn_tty_stat_callback(int i, isdn_ctrl *c)
@@ -2319,7 +2320,7 @@ isdn_tty_at_cout(char *msg, modem_info *info)
 
 	spin_lock_irqsave(&info->readlock, flags);
 	tty = info->tty;
-	if ((info->flags & ISDN_ASYNC_CLOSING) || (!tty)) {
+	if ((info->flags & ASYNC_CLOSING) || (!tty)) {
 		spin_unlock_irqrestore(&info->readlock, flags);
 		return;
 	}
@@ -2469,15 +2470,15 @@ isdn_tty_modem_result(int code, modem_info *info)
 	case RESULT_NO_CARRIER:
 #ifdef ISDN_DEBUG_MODEM_HUP
 		printk(KERN_DEBUG "modem_result: NO CARRIER %d %d\n",
-		       (info->flags & ISDN_ASYNC_CLOSING),
+		       (info->flags & ASYNC_CLOSING),
 		       (!info->tty));
 #endif
 		m->mdmreg[REG_RINGCNT] = 0;
 		del_timer(&info->nc_timer);
 		info->ncarrier = 0;
-		if ((info->flags & ISDN_ASYNC_CLOSING) || (!info->tty)) {
+		if ((info->flags & ASYNC_CLOSING) || (!info->tty))
 			return;
-		}
+
 #ifdef CONFIG_ISDN_AUDIO
 		if (info->vonline & 1) {
 #ifdef ISDN_DEBUG_MODEM_VOICE
@@ -2608,10 +2609,10 @@ isdn_tty_modem_result(int code, modem_info *info)
 		}
 	}
 	if (code == RESULT_NO_CARRIER) {
-		if ((info->flags & ISDN_ASYNC_CLOSING) || (!info->tty)) {
+		if ((info->flags & ASYNC_CLOSING) || (!info->tty))
 			return;
-		}
-		if (info->flags & ISDN_ASYNC_CHECK_CD)
+
+		if (info->flags & ASYNC_CHECK_CD)
 			tty_hangup(info->tty);
 	}
 }