Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 278 insertions, 0 deletions

diff --git a/drivers/isdn/hisax/nj_s.c b/drivers/isdn/hisax/nj_s.c
new file mode 100644
index 0000000..fd66469
--- /dev/null
+++ b/drivers/isdn/hisax/nj_s.c
@@ -0,0 +1,278 @@
+/* $Id: nj_s.c,v 2.13.2.4 2004/01/16 01:53:48 keil Exp $
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include "hisax.h"
+#include "isac.h"
+#include "isdnl1.h"
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/ppp_defs.h>
+#include "netjet.h"
+
+const char *NETjet_S_revision = "$Revision: 2.13.2.4 $";
+
+static u_char dummyrr(struct IsdnCardState *cs, int chan, u_char off)
+{
+	return(5);
+}
+
+static void dummywr(struct IsdnCardState *cs, int chan, u_char off, u_char value)
+{
+}
+
+static irqreturn_t
+netjet_s_interrupt(int intno, void *dev_id, struct pt_regs *regs)
+{
+	struct IsdnCardState *cs = dev_id;
+	u_char val, s1val, s0val;
+	u_long flags;
+
+	spin_lock_irqsave(&cs->lock, flags);
+	s1val = bytein(cs->hw.njet.base + NETJET_IRQSTAT1);
+	if (!(s1val & NETJET_ISACIRQ)) {
+		val = NETjet_ReadIC(cs, ISAC_ISTA);
+		if (cs->debug & L1_DEB_ISAC)
+			debugl1(cs, "tiger: i1 %x %x", s1val, val);
+		if (val) {
+			isac_interrupt(cs, val);
+			NETjet_WriteIC(cs, ISAC_MASK, 0xFF);
+			NETjet_WriteIC(cs, ISAC_MASK, 0x0);
+		}
+		s1val = 1;
+	} else
+		s1val = 0;
+	/* 
+	 * read/write stat0 is better, because lower IRQ rate
+	 * Note the IRQ is on for 125 us if a condition match
+	 * thats long on modern CPU and so the IRQ is reentered
+	 * all the time.
+	 */
+	s0val = bytein(cs->hw.njet.base + NETJET_IRQSTAT0);
+	if ((s0val | s1val)==0) { // shared IRQ
+		spin_unlock_irqrestore(&cs->lock, flags);
+		return IRQ_NONE;
+	} 
+	if (s0val)
+		byteout(cs->hw.njet.base + NETJET_IRQSTAT0, s0val);
+	/* start new code 13/07/00 GE */
+	/* set bits in sval to indicate which page is free */
+	if (inl(cs->hw.njet.base + NETJET_DMA_WRITE_ADR) <
+		inl(cs->hw.njet.base + NETJET_DMA_WRITE_IRQ))
+		/* the 2nd write page is free */
+		s0val = 0x08;
+	else	/* the 1st write page is free */
+		s0val = 0x04;	
+	if (inl(cs->hw.njet.base + NETJET_DMA_READ_ADR) <
+		inl(cs->hw.njet.base + NETJET_DMA_READ_IRQ))
+		/* the 2nd read page is free */
+		s0val |= 0x02;
+	else	/* the 1st read page is free */
+		s0val |= 0x01;	
+	if (s0val != cs->hw.njet.last_is0) /* we have a DMA interrupt */
+	{
+		if (test_and_set_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags)) {
+			printk(KERN_WARNING "nj LOCK_ATOMIC s0val %x->%x\n",
+				cs->hw.njet.last_is0, s0val);
+			spin_unlock_irqrestore(&cs->lock, flags);
+			return IRQ_HANDLED;
+		}
+		cs->hw.njet.irqstat0 = s0val;
+		if ((cs->hw.njet.irqstat0 & NETJET_IRQM0_READ) != 
+			(cs->hw.njet.last_is0 & NETJET_IRQM0_READ))
+			/* we have a read dma int */
+			read_tiger(cs);
+		if ((cs->hw.njet.irqstat0 & NETJET_IRQM0_WRITE) !=
+			(cs->hw.njet.last_is0 & NETJET_IRQM0_WRITE))
+			/* we have a write dma int */
+			write_tiger(cs);
+		/* end new code 13/07/00 GE */
+		test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
+	}
+	spin_unlock_irqrestore(&cs->lock, flags);
+	return IRQ_HANDLED;
+}
+
+static void
+reset_netjet_s(struct IsdnCardState *cs)
+{
+	cs->hw.njet.ctrl_reg = 0xff;  /* Reset On */
+	byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
+	mdelay(10);
+	/* now edge triggered for TJ320 GE 13/07/00 */
+	/* see comment in IRQ function */
+	if (cs->subtyp) /* TJ320 */
+		cs->hw.njet.ctrl_reg = 0x40;  /* Reset Off and status read clear */
+	else
+		cs->hw.njet.ctrl_reg = 0x00;  /* Reset Off and status read clear */
+	byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
+	mdelay(10);
+	cs->hw.njet.auxd = 0;
+	cs->hw.njet.dmactrl = 0;
+	byteout(cs->hw.njet.base + NETJET_AUXCTRL, ~NETJET_ISACIRQ);
+	byteout(cs->hw.njet.base + NETJET_IRQMASK1, NETJET_ISACIRQ);
+	byteout(cs->hw.njet.auxa, cs->hw.njet.auxd);
+}
+
+static int
+NETjet_S_card_msg(struct IsdnCardState *cs, int mt, void *arg)
+{
+	u_long flags;
+
+	switch (mt) {
+		case CARD_RESET:
+			spin_lock_irqsave(&cs->lock, flags);
+			reset_netjet_s(cs);
+			spin_unlock_irqrestore(&cs->lock, flags);
+			return(0);
+		case CARD_RELEASE:
+			release_io_netjet(cs);
+			return(0);
+		case CARD_INIT:
+			reset_netjet_s(cs);
+			inittiger(cs);
+			spin_lock_irqsave(&cs->lock, flags);
+			clear_pending_isac_ints(cs);
+			initisac(cs);
+			/* Reenable all IRQ */
+			cs->writeisac(cs, ISAC_MASK, 0);
+			spin_unlock_irqrestore(&cs->lock, flags);
+			return(0);
+		case CARD_TEST:
+			return(0);
+	}
+	return(0);
+}
+
+static struct pci_dev *dev_netjet __initdata = NULL;
+
+int __init
+setup_netjet_s(struct IsdnCard *card)
+{
+	int bytecnt,cfg;
+	struct IsdnCardState *cs = card->cs;
+	char tmp[64];
+
+#ifdef __BIG_ENDIAN
+#error "not running on big endian machines now"
+#endif
+	strcpy(tmp, NETjet_S_revision);
+	printk(KERN_INFO "HiSax: Traverse Tech. NETjet-S driver Rev. %s\n", HiSax_getrev(tmp));
+	if (cs->typ != ISDN_CTYPE_NETJET_S)
+		return(0);
+	test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
+
+#ifdef CONFIG_PCI
+
+	for ( ;; )
+	{
+		if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
+			PCI_DEVICE_ID_TIGERJET_300,  dev_netjet))) {
+			if (pci_enable_device(dev_netjet))
+				return(0);
+			pci_set_master(dev_netjet);
+			cs->irq = dev_netjet->irq;
+			if (!cs->irq) {
+				printk(KERN_WARNING "NETjet-S: No IRQ for PCI card found\n");
+				return(0);
+			}
+			cs->hw.njet.base = pci_resource_start(dev_netjet, 0);
+			if (!cs->hw.njet.base) {
+				printk(KERN_WARNING "NETjet-S: No IO-Adr for PCI card found\n");
+				return(0);
+			}
+			/* the TJ300 and TJ320 must be detected, the IRQ handling is different
+			 * unfortunatly the chips use the same device ID, but the TJ320 has
+			 * the bit20 in status PCI cfg register set
+			 */
+			pci_read_config_dword(dev_netjet, 0x04, &cfg);
+			if (cfg & 0x00100000)
+				cs->subtyp = 1; /* TJ320 */
+			else
+				cs->subtyp = 0; /* TJ300 */
+			/* 2001/10/04 Christoph Ersfeld, Formula-n Europe AG www.formula-n.com */
+			if ((dev_netjet->subsystem_vendor == 0x55) &&
+				(dev_netjet->subsystem_device == 0x02)) {
+				printk(KERN_WARNING "Netjet: You tried to load this driver with an incompatible TigerJet-card\n");
+				printk(KERN_WARNING "Use type=41 for Formula-n enter:now ISDN PCI and compatible\n");
+				return(0);
+			}
+			/* end new code */
+		} else {
+			printk(KERN_WARNING "NETjet-S: No PCI card found\n");
+			return(0);
+		}
+
+		cs->hw.njet.auxa = cs->hw.njet.base + NETJET_AUXDATA;
+		cs->hw.njet.isac = cs->hw.njet.base | NETJET_ISAC_OFF;
+
+		cs->hw.njet.ctrl_reg = 0xff;  /* Reset On */
+		byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
+		mdelay(10);
+
+		cs->hw.njet.ctrl_reg = 0x00;  /* Reset Off and status read clear */
+		byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
+		mdelay(10);
+
+		cs->hw.njet.auxd = 0xC0;
+		cs->hw.njet.dmactrl = 0;
+
+		byteout(cs->hw.njet.base + NETJET_AUXCTRL, ~NETJET_ISACIRQ);
+		byteout(cs->hw.njet.base + NETJET_IRQMASK1, NETJET_ISACIRQ);
+		byteout(cs->hw.njet.auxa, cs->hw.njet.auxd);
+
+		switch ( ( ( NETjet_ReadIC( cs, ISAC_RBCH ) >> 5 ) & 3 ) )
+		{
+			case 0 :
+				break;
+
+			case 3 :
+				printk( KERN_WARNING "NETjet-S: NETspider-U PCI card found\n" );
+				continue;
+
+			default :
+				printk( KERN_WARNING "NETjet-S: No PCI card found\n" );
+				return 0;
+                }
+                break;
+	}
+#else
+
+	printk(KERN_WARNING "NETjet-S: NO_PCI_BIOS\n");
+	printk(KERN_WARNING "NETjet-S: unable to config NETJET-S PCI\n");
+	return (0);
+
+#endif /* CONFIG_PCI */
+
+	bytecnt = 256;
+
+	printk(KERN_INFO
+		"NETjet-S: %s card configured at %#lx IRQ %d\n",
+		cs->subtyp ? "TJ320" : "TJ300", cs->hw.njet.base, cs->irq);
+	if (!request_region(cs->hw.njet.base, bytecnt, "netjet-s isdn")) {
+		printk(KERN_WARNING
+		       "HiSax: %s config port %#lx-%#lx already in use\n",
+		       CardType[card->typ],
+		       cs->hw.njet.base,
+		       cs->hw.njet.base + bytecnt);
+		return (0);
+	}
+	cs->readisac  = &NETjet_ReadIC;
+	cs->writeisac = &NETjet_WriteIC;
+	cs->readisacfifo  = &NETjet_ReadICfifo;
+	cs->writeisacfifo = &NETjet_WriteICfifo;
+	cs->BC_Read_Reg  = &dummyrr;
+	cs->BC_Write_Reg = &dummywr;
+	cs->BC_Send_Data = &netjet_fill_dma;
+	setup_isac(cs);
+	cs->cardmsg = &NETjet_S_card_msg;
+	cs->irq_func = &netjet_s_interrupt;
+	cs->irq_flags |= SA_SHIRQ;
+	ISACVersion(cs, "NETjet-S:");
+	return (1);
+}