irqchip: bcm2836: Move SMP startup code to arch/arm (v2)

In order to easily provide SMP for BCM2837 on 32-bit and 64-bit
the SMP startup code was placed in irq-bcm2836. That's not the
right approach. So move this code where it belongs.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 41f4988cc287 ("irqchip/bcm2836: Add SMP support for the 2836")
Tested-by: Eric Anholt <eric@anholt.net>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>

1 files changed, 2 insertions, 77 deletions

diff --git a/drivers/irqchip/irq-bcm2836.c b/drivers/irqchip/irq-bcm2836.c
index dc8c1e3..667b9e1 100644
--- a/drivers/irqchip/irq-bcm2836.c
+++ b/drivers/irqchip/irq-bcm2836.c
@@ -19,62 +19,9 @@
 #include <linux/of_irq.h>
 #include <linux/irqchip.h>
 #include <linux/irqdomain.h>
-#include <asm/exception.h>
-
-#define LOCAL_CONTROL			0x000
-#define LOCAL_PRESCALER			0x008
+#include <linux/irqchip/irq-bcm2836.h>
 
-/*
- * The low 2 bits identify the CPU that the GPU IRQ goes to, and the
- * next 2 bits identify the CPU that the GPU FIQ goes to.
- */
-#define LOCAL_GPU_ROUTING		0x00c
-/* When setting bits 0-3, enables PMU interrupts on that CPU. */
-#define LOCAL_PM_ROUTING_SET		0x010
-/* When setting bits 0-3, disables PMU interrupts on that CPU. */
-#define LOCAL_PM_ROUTING_CLR		0x014
-/*
- * The low 4 bits of this are the CPU's timer IRQ enables, and the
- * next 4 bits are the CPU's timer FIQ enables (which override the IRQ
- * bits).
- */
-#define LOCAL_TIMER_INT_CONTROL0	0x040
-/*
- * The low 4 bits of this are the CPU's per-mailbox IRQ enables, and
- * the next 4 bits are the CPU's per-mailbox FIQ enables (which
- * override the IRQ bits).
- */
-#define LOCAL_MAILBOX_INT_CONTROL0	0x050
-/*
- * The CPU's interrupt status register.  Bits are defined by the the
- * LOCAL_IRQ_* bits below.
- */
-#define LOCAL_IRQ_PENDING0		0x060
-/* Same status bits as above, but for FIQ. */
-#define LOCAL_FIQ_PENDING0		0x070
-/*
- * Mailbox write-to-set bits.  There are 16 mailboxes, 4 per CPU, and
- * these bits are organized by mailbox number and then CPU number.  We
- * use mailbox 0 for IPIs.  The mailbox's interrupt is raised while
- * any bit is set.
- */
-#define LOCAL_MAILBOX0_SET0		0x080
-#define LOCAL_MAILBOX3_SET0		0x08c
-/* Mailbox write-to-clear bits. */
-#define LOCAL_MAILBOX0_CLR0		0x0c0
-#define LOCAL_MAILBOX3_CLR0		0x0cc
-
-#define LOCAL_IRQ_CNTPSIRQ	0
-#define LOCAL_IRQ_CNTPNSIRQ	1
-#define LOCAL_IRQ_CNTHPIRQ	2
-#define LOCAL_IRQ_CNTVIRQ	3
-#define LOCAL_IRQ_MAILBOX0	4
-#define LOCAL_IRQ_MAILBOX1	5
-#define LOCAL_IRQ_MAILBOX2	6
-#define LOCAL_IRQ_MAILBOX3	7
-#define LOCAL_IRQ_GPU_FAST	8
-#define LOCAL_IRQ_PMU_FAST	9
-#define LAST_IRQ		LOCAL_IRQ_PMU_FAST
+#include <asm/exception.h>
 
 struct bcm2836_arm_irqchip_intc {
 	struct irq_domain *domain;
@@ -215,24 +162,6 @@ static int bcm2836_cpu_dying(unsigned int cpu)
 					     cpu);
 	return 0;
 }
-
-#ifdef CONFIG_ARM
-static int __init bcm2836_smp_boot_secondary(unsigned int cpu,
-					     struct task_struct *idle)
-{
-	unsigned long secondary_startup_phys =
-		(unsigned long)virt_to_phys((void *)secondary_startup);
-
-	writel(secondary_startup_phys,
-	       intc.base + LOCAL_MAILBOX3_SET0 + 16 * cpu);
-
-	return 0;
-}
-
-static const struct smp_operations bcm2836_smp_ops __initconst = {
-	.smp_boot_secondary	= bcm2836_smp_boot_secondary,
-};
-#endif
 #endif
 
 static const struct irq_domain_ops bcm2836_arm_irqchip_intc_ops = {
@@ -249,10 +178,6 @@ bcm2836_arm_irqchip_smp_init(void)
 			  bcm2836_cpu_dying);
 
 	set_smp_cross_call(bcm2836_arm_irqchip_send_ipi);
-
-#ifdef CONFIG_ARM
-	smp_set_ops(&bcm2836_smp_ops);
-#endif
 #endif
 }